drm/repaper: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-16-daniel.vetter@ffwll.ch

drm/st7586: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: David Lechner <david@lechnology.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-15-daniel.vetter@ffwll.ch

drm/st7735r: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Aside: There was an oddity in the old code, we allocated priv but in
the error path we've freed priv->dbidev ...

Acked-by: David Lechner <david@lechnology.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-14-daniel.vetter@ffwll.ch

drm/udl: don't set drm_device->dev_private

We're mostly there already, just a handful of places that didn't use
the to_udl container_of cast. To make sure no new appear, don't set
->dev_private.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Allison Randal <allison@lohutok.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-13-daniel.vetter@ffwll.ch

drm/udl: Use devm_drm_dev_alloc

With Thomas' patch to clean up fbdev init this is a rather standard
conversion to the new wrapper macro.

v2: Rebase on top of Thomas' patches to remove the return value from
drm_fbdev_generic_setup()

v3: Update commit message to reflect the reality of the rebased patch
(Sam)

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-12-daniel.vetter@ffwll.ch

drm/v3d: Delete v3d_dev->pdev

We already have it in v3d_dev->drm.dev with zero additional pointer
chasing. Personally I don't like duplicated pointers like this
because:
- reviewers need to check whether the pointer is for the same or
different objects if there's multiple
- compilers have an easier time too

To avoid having to pull in some big headers I implemented the casting
function as a macro instead of a static inline. Typechecking thanks to
container_of still assured.

But also a bit a bikeshed, so feel free to ignore.

v2: More parens for v3d_to_pdev macro (checkpatch)

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-11-daniel.vetter@ffwll.ch

drm/v3d: Delete v3d_dev->dev

We already have it in v3d_dev->drm.dev with zero additional pointer
chasing. Personally I don't like duplicated pointers like this
because:
- reviewers need to check whether the pointer is for the same or
  different objects if there's multiple
- compilers have an easier time too

But also a bit a bikeshed, so feel free to ignore.

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-10-daniel.vetter@ffwll.ch

drm/v3d: Use devm_drm_dev_alloc

Also allows us to simplify the unroll code since the drm_dev_put
disappears.

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-9-daniel.vetter@ffwll.ch

drm/v3d: Don't set drm_device->dev_private

And switch the helper over to container_of, which is a bunch faster
than chasing a pointer. Plus allows gcc to see through this maze.

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-8-daniel.vetter@ffwll.ch

drm/vboxvideo: Use devm_gen_pool_create

Aside from deleting all the cleanup code we're now also setting a name
for the pool

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-7-daniel.vetter@ffwll.ch

drm/vboxvideo: use managed pci functions

Allows us to drop the cleanup code on the floor.

Sam noticed in his review:
> With this change we avoid calling pci_disable_device()
> twise in case vbox_mm_init() fails.
> Once in vbox_hw_fini() and once in the error path.

v2: Include Sam's review remarks

v3: Fix typo in commit summary (Thomas Zimmermann)

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-6-daniel.vetter@ffwll.ch

drm/vboxvideo: Stop using drm_device->dev_private

We use the baseclass pattern here, so lets to the proper (and more
typesafe) upcasting.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-5-daniel.vetter@ffwll.ch

drm/vboxvideo: Use devm_drm_dev_alloc

Straightforward conversion.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-4-daniel.vetter@ffwll.ch

drm/vboxvideo: drop DRM_MTRR_WC #define

Doesn't apply to upstream kernels since a rather long time.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-3-daniel.vetter@ffwll.ch

drm: Add devm_drm_dev_alloc macro

Add a new macro helper to combine the usual init sequence in drivers,
consisting of a kzalloc + devm_drm_dev_init + drmm_add_final_kfree
triplet. This allows us to remove the rather unsightly
drmm_add_final_kfree from all currently merged drivers.

The kerneldoc is only added for this new function. Existing kerneldoc
and examples will be udated at the very end, since once all drivers
are converted over to devm_drm_dev_alloc we can unexport a lot of
interim functions and make the documentation for driver authors a lot
cleaner and less confusing. There will be only one true way to
initialize a drm_device at the end of this, which is going to be
devm_drm_dev_alloc.

v2:
- Actually explain what this is for in the commit message (Sam)
- Fix checkpatch issues (Sam)

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-2-daniel.vetter@ffwll.ch

drm/omap: venc: remove unused variable 'venc_config_pal_bdghi'

drivers/gpu/drm/omapdrm/dss/venc.c:211:33:
 warning: 'venc_config_pal_bdghi' defined but not used [-Wunused-const-variable=]
 static const struct venc_config venc_config_pal_bdghi = {
                                 ^~~~~~~~~~~~~~~~~~~~~

It is never used, remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415132105.43636-1-yuehaibing@huawei.com

drm/meson: Remove unneeded semicolon

Fixes coccicheck warning:

drivers/gpu/drm/meson/meson_plane.c:226:3-4: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424074949.12309-1-zhengbin13@huawei.com

drm/dp_mst: Kill the second sideband tx slot, save the world

While we support using both tx slots for sideband transmissions, it
appears that DisplayPort devices in the field didn't end up doing a very
good job of supporting it. From section 5.2.1 of the DP 2.0
specification:

  There are MST Sink/Branch devices in the field that do not handle
  interleaved message transactions.

  To facilitate message transaction handling by downstream devices, an
  MST Source device shall generate message transactions in an atomic
  manner (i.e., the MST Source device shall not concurrently interleave
  multiple message transactions). Therefore, an MST Source device shall
  clear the Message_Sequence_No value in the Sideband_MSG_Header to 0.

This might come as a bit of a surprise since the vast majority of hubs
will support using both tx slots even if they don't support interleaved
message transactions, and we've also been using both tx slots since MST
was introduced into the kernel.

However, there is one device we've had trouble getting working
consistently with MST for so long that we actually assumed it was just
broken: the infamous Dell P2415Qb. Previously this monitor would appear
to work sometimes, but in most situations would end up timing out
LINK_ADDRESS messages almost at random until you power cycled the whole
display. After reading section 5.2.1 in the DP 2.0 spec, some closer
investigation into this infamous display revealed it was only ever
timing out on sideband messages in the second TX slot.

Sure enough, avoiding the second TX slot has suddenly made this monitor
function perfectly for the first time in five years. And since they
explicitly mention this in the specification, I doubt this is the only
monitor out there with this issue. This might even explain explain the
seemingly harmless garbage sideband responses we would occasionally see
with MST hubs!

So - rewrite our sideband TX handlers to only support one TX slot. In
order to simplify our sideband handling now that we don't support
transmitting to multiple MSTBs at once, we also move all state tracking
for down replies from mstbs to the topology manager.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Sean Paul <sean@poorly.run>
Cc: "Lin, Wayne" <Wayne.Lin@amd.com>
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424181308.770749-1-lyude@redhat.com

drm/rockchip: Remove unneeded semicolon

Fixes coccicheck warning:

drivers/gpu/drm/rockchip/cdn-dp-reg.c:604:2-3: Unneeded semicolon
drivers/gpu/drm/rockchip/cdn-dp-reg.c:622:2-3: Unneeded semicolon
drivers/gpu/drm/rockchip/cdn-dp-reg.c:703:2-3: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424074410.1070-1-zhengbin13@huawei.com

drm/rockchip: cdn-dp-core: Make cdn_dp_core_suspend/resume static

This fixes the following warning detected when running make with W=1

    drivers/gpu/drm/rockchip//cdn-dp-core.c:1112:5: warning: no previous
    prototype for ‘cdn_dp_suspend’ [-Wmissing-prototypes]

    drivers/gpu/drm/rockchip//cdn-dp-core.c:1126:5: warning: no previous
    prototype for ‘cdn_dp_resume’ [-Wmissing-prototypes]

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200426161653.7710-1-enric.balletbo@collabora.com

drm/stm: ltdc: check number of endpoints

Number of endpoints could exceed the fix value MAX_ENDPOINTS(2).
Instead of increase simply this value, the number of endpoint
could be read from device tree. Load sequence has been a little
rework to take care of several panel or bridge which can be
connected/disconnected or enable/disable.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1582877258-1112-1-git-send-email-yannick.fertre@st.com

panel: simple: Add Ivo M133NWF4 R0

The InfoVision Optoelectronics M133NWF4 R0 panel is a 13.3" 1920x1080
eDP panel, add support for it in panel-simple.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420215728.1927434-2-bjorn.andersson@linaro.org

dt-bindings: display: simple: Add IVO M133NWF4 R0

Define the vendor prefix for InfoVision Optoelectronics and add their
M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel to the compatible list
of panel-simple.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org> [vendor-prefix]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420215728.1927434-1-bjorn.andersson@linaro.org

panel: simple: Add BOE NV133FHM-N61

The BOE NV133FHM-N61 panel is a 13.3" 1920x1080 eDP panel, add support
for it in panel-simple.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[add boe_nv133fhm_n61_modes in alphabetical order]
Link: https://patchwork.freedesktop.org/patch/msgid/20200420215742.1927498-2-bjorn.andersson@linaro.org

dt-bindings: display: simple: Add BOE NV133FHM-N61

Add the BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel to the
compatible list of panel-simple.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420215742.1927498-1-bjorn.andersson@linaro.org

video/fbdev/riva: Remove dead code

These are dead code since 3.15. These can be removed forever if no
plan to use it further.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1587407244-32574-1-git-send-email-jrdr.linux@gmail.com

drm/panel: remove set but not used variable 'config'

drivers/gpu/drm/panel/panel-truly-nt35597.c:493:31: warning: variable ‘config’ set but not used [-Wunused-but-set-variable]
  const struct nt35597_config *config;
                               ^~~~~~

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417101401.19388-1-yuehaibing@huawei.com

dt-bindings: panel: Document some missing compatible strings

Add missing compatible strings for the Panasonic and Chunghwa panels
found on NVIDIA Dalmore and Cardhu boards.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417065328.1578603-1-thierry.reding@gmail.com

drm/bridge: panel: Return always an error pointer in drm_panel_bridge_add()

Since commit 89958b7cd955 ("drm/bridge: panel: Infer connector type from
panel by default"), drm_panel_bridge_add() and their variants can return
NULL and an error pointer. This is fine but none of the actual users of
the API are checking for the NULL value. Instead of change all the
users, seems reasonable to return an error pointer instead. So change
the returned value for those functions when the connector type is unknown.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416210654.2468805-1-enric.balletbo@collabora.com

drm/bridge: ps8640: Let panel to set the connector type

The panel connector type should be set by the panel not the bridge, so
remove the connector_type assignment.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416164404.2418426-2-enric.balletbo@collabora.com

drm: panel: Set connector type for LP120UP1

The LP120UP1 is a eDP panel, set the connector type accordingly.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416164404.2418426-1-enric.balletbo@collabora.com

drm/panel: ili9322: Remove unneeded semicolon

Fixes coccicheck warning:

drivers/gpu/drm/panel/panel-ilitek-ili9322.c:382:2-3: Unneeded semicolon
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:391:2-3: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424080224.30763-1-zhengbin13@huawei.com

drm/panel: simple: Add support for AUO G121EAN01.4 panel

Add timings for the AUO G121EAN01.4 panel.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415172725.84257-4-sebastian.reichel@collabora.com

drm/panel: simple: Add support for AUO G156XTN01.0 panel

Add timings for the AUO G156XTN01.0 panel.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415172725.84257-3-sebastian.reichel@collabora.com

drm/panel: simple: Add support for AUO G190EAN01 panel

Add timings for the G190EAN01 dual channel LVDS panel.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415172725.84257-2-sebastian.reichel@collabora.com

drm/lima: enable runtime pm

Enable runtime pm by default so GPU suspend when idle
for 200ms. This value can be changed by
autosuspend_delay_ms in device's power sysfs dir.

On Allwinner H3 lima_device_resume takes ~40us and
lima_device_suspend takes ~20us.

Tested-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-11-yuq825@gmail.com

drm/lima: add pm resume/suspend ops

Add driver pm system and runtime hardware resume/suspend ops.
Note this won't enable runtime pm of the device yet.

v2:
Do clock and power gating when suspend/resume.

Tested-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-10-yuq825@gmail.com

drm/lima: separate clk/regulator enable/disable function

For being used by both device init/fini and suspend/resume.

Tested-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-9-yuq825@gmail.com

drm/lima: add resume/suspend callback for each ip

For called when PM do resume/suspend.

Tested-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-8-yuq825@gmail.com

drm/lima: power down ip blocks when pmu exit

Prepare resume/suspend PM.

v2:
Fix lima_pmu_wait_cmd timeout when mali400 case.

Tested-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-7-yuq825@gmail.com

drm/lima: add lima_devfreq_resume/suspend

Used for device resume/suspend in the following commits.

Tested-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-6-yuq825@gmail.com

drm/lima: always set page directory when switch vm

We need to flush TLB anyway before every task start, and the
page directory will be set to empty vm after suspend/resume,
so always set it to the task vm even no ctx switch happens.

Tested-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-5-yuq825@gmail.com

drm/lima: check vm != NULL in lima_vm_put

No need to handle this check before calling lima_vm_put.

Tested-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-4-yuq825@gmail.com

drm/lima: print process name and pid when task error

When error task list is full, print the process info where
the error task come from for debug usage.

Tested-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-3-yuq825@gmail.com

drm/lima: use module_platform_driver helper

Simplify module init/exit with module_platform_driver.

Tested-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-2-yuq825@gmail.com

drm/lima: Clean up redundant pdev pointer

There's no point explicitly tracking the platform device when it can be
trivially derived from the regular device pointer in the couple of
places it's ever used.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8d9073cc91c10fc70910587fd1794e0e8f32b467.1587509150.git.robin.murphy@arm.com

drm/lima: Clean up IRQ warnings

Use the optional form of platform_get_irq() for blocks that legitimately
may not be present, to avoid getting an annoying barrage of spurious
warnings for non-existent PPs on configurations like Mali-450 MP2.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/de475904091400ef6c123285f221094654d96d35.1587509150.git.robin.murphy@arm.com

Revert "drm/dp_mst: Remove single tx msg restriction."

This reverts commit 6bb0942e8f46863a745489cce27efe5be2a3885e.

Unfortunately it would appear that the rumors we've heard of sideband
message interleaving not being very well supported are true. On the
Lenovo ThinkPad Thunderbolt 3 dock that I have, interleaved messages
appear to just get dropped:

  [drm:drm_dp_mst_wait_tx_reply [drm_kms_helper]] timedout msg send
  00000000571ddfd0 2 1
  [dp_mst] txmsg cur_offset=2 cur_len=2 seqno=1 state=SENT path_msg=1 dst=00
  [dp_mst]  type=ENUM_PATH_RESOURCES contents:
  [dp_mst]  port=2

DP descriptor for this hub:
  OUI 90-cc-24 dev-ID SYNA3  HW-rev 1.0 SW-rev 3.12 quirks 0x0008

It would seem like as well that this is a somewhat well known issue in
the field. From section 5.4.2 of the DisplayPort 2.0 specification:

  There are MST Sink/Branch devices in the field that do not handle
  interleaved message transactions.

  To facilitate message transaction handling by downstream devices, an
  MST Source device shall generate message transactions in an atomic
  manner (i.e., the MST Source device shall not concurrently interleave
  multiple message transactions). Therefore, an MST Source device shall
  clear the Message_Sequence_No value in the Sideband_MSG_Header to 0.

  MST Source devices that support field policy updates by way of
  software should update the policy to forego the generation of
  interleaved message transactions.

This is a bit disappointing, as features like HDCP require that we send
a sideband request every ~2 seconds for each active stream. However,
there isn't really anything in the specification that allows us to
accurately probe for interleaved messages.

If it ends up being that we -really- need this in the future, we might
be able to whitelist hubs where interleaving is known to work-or maybe
try some sort of heuristics. But for now, let's just play it safe and
not use it.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 6bb0942e8f46 ("drm/dp_mst: Remove single tx msg restriction.")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423164225.680178-1-lyude@redhat.com
Reviewed-by: Sean Paul <sean@poorly.run>

dma-buf: Couple of documentation typo fixes

Fix a couple of typos: "as" -> "has" and "int" -> "in".

Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420074115.23931-1-galpress@amazon.com

drm/gma500: Remove dead code

These are dead code since 3.7. If there is no plan to use them further,
these can be removed forever.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1587406337-32317-1-git-send-email-jrdr.linux@gmail.com

drm/gma500: remove unused variable 'hdmi_ids'

drivers/gpu/drm/gma500/oaktrail_hdmi.c:676:35: warning: ‘hdmi_ids’ defined but not used [-Wunused-const-variable=]
 static const struct pci_device_id hdmi_ids[] = {
                                   ^~~~~~~~

It is never used, remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417101032.8140-1-yuehaibing@huawei.com

drm: Fix misspellings of "Analog Devices"

According to https://www.analog.com/, the company name is spelled
"Analog Devices".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416103058.15269-4-geert+renesas@glider.be

drm/ast: Allocate initial CRTC state of the correct size

The ast driver inherits from DRM's CRTC state, but still uses the atomic
helper for struct drm_crtc_funcs.reset, drm_atomic_helper_crtc_reset().

The helper only allocates enough memory for the core CRTC state. That
results in an out-ouf-bounds access when duplicating the initial CRTC
state. Simplified backtrace shown below:

[   21.469321] ==================================================================
[   21.469434] BUG: KASAN: slab-out-of-bounds in ast_crtc_atomic_duplicate_state+0x84/0x100 [ast]
[   21.469445] Read of size 8 at addr ffff888036c1c5f8 by task systemd-udevd/382
[   21.469451]
[   21.469464] CPU: 2 PID: 382 Comm: systemd-udevd Tainted: G            E     5.5.0-rc6-1-default+ #214
[   21.469473] Hardware name: Sun Microsystems SUN FIRE X2270 M2/SUN FIRE X2270 M2, BIOS 2.05    07/01/2010
[   21.469480] Call Trace:
[   21.469501]  dump_stack+0xb8/0x110
[   21.469528]  print_address_description.constprop.0+0x1b/0x1e0
[   21.469557]  ? ast_crtc_atomic_duplicate_state+0x84/0x100 [ast]
[   21.469581]  ? ast_crtc_atomic_duplicate_state+0x84/0x100 [ast]
[   21.469597]  __kasan_report.cold+0x1a/0x35
[   21.469640]  ? ast_crtc_atomic_duplicate_state+0x84/0x100 [ast]
[   21.469665]  kasan_report+0xe/0x20
[   21.469693]  ast_crtc_atomic_duplicate_state+0x84/0x100 [ast]
[   21.469733]  drm_atomic_get_crtc_state+0xbf/0x1c0
[   21.469768]  __drm_atomic_helper_set_config+0x81/0x5a0
[   21.469803]  ? drm_atomic_plane_check+0x690/0x690
[   21.469843]  ? drm_client_rotation+0xae/0x240
[   21.469876]  drm_client_modeset_commit_atomic+0x230/0x390
[   21.469888]  ? __mutex_lock+0x8f0/0xbe0
[   21.469929]  ? drm_client_firmware_config.isra.0+0xa60/0xa60
[   21.469948]  ? drm_client_modeset_commit_force+0x28/0x230
[   21.470031]  ? memset+0x20/0x40
[   21.470078]  drm_client_modeset_commit_force+0x90/0x230
[   21.470110]  drm_fb_helper_restore_fbdev_mode_unlocked+0x5f/0xc0
[   21.470132]  drm_fb_helper_set_par+0x59/0x70
[   21.470155]  fbcon_init+0x61d/0xad0
[   21.470185]  ? drm_fb_helper_restore_fbdev_mode_unlocked+0xc0/0xc0
[   21.470232]  visual_init+0x187/0x240
[   21.470266]  do_bind_con_driver+0x2e3/0x460
[   21.470321]  do_take_over_console+0x20a/0x290
[   21.470371]  do_fbcon_takeover+0x85/0x100
[   21.470402]  register_framebuffer+0x2fd/0x490
[   21.470425]  ? kzalloc.constprop.0+0x10/0x10
[   21.470503]  __drm_fb_helper_initial_config_and_unlock+0xf2/0x140
[   21.470533]  drm_fbdev_client_hotplug+0x162/0x250
[   21.470563]  drm_fbdev_generic_setup+0xd2/0x155
[   21.470602]  ast_driver_load+0x688/0x850 [ast]
<...>
[   21.472625] ==================================================================

Allocating enough memory for struct ast_crtc_state in a custom ast CRTC
reset handler fixes the problem.

v2:
* implement according to drm_atomic_helper_crtc_reset()
* update state with __drm_atomic_helper_crtc_reset()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 83be6a3ceb11 ("drm/ast: Introduce struct ast_crtc_state")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130094012.32140-1-tzimmermann@suse.de

dt-bindings: display: convert rockchip rk3066 hdmi bindings to yaml

Current dts files with 'hdmi' nodes for rk3066 are manually verified.
In order to automate this process rockchip,rk3066-hdmi.txt
has to be converted to yaml.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403133630.7377-1-jbx6244@gmail.com

drm/tegra: Clean up GPIO includes

The Tegra DRM drivers includes the legacy GPIO headers
<linux/gpio.h> and <linux/of_gpio.h> but what it really
uses is <linux/gpio/consumer.h> since only gpio_desc
structs are ever referenced.

Include the right header on the top level tegra/drm.h
file and drop all the surplus includes.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415122427.111769-1-linus.walleij@linaro.org

video: fbdev: vesafb: add missed release_region

The driver forgets to free the I/O region in remove and probe
failure.
Add the missed calls to fix it.

Since the success of request_region() is optional, add the "region" field
in vesafb_par to represent whether request_region() succeeds.
Then only call release_region() when "region" is not null.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200329145839.20076-1-hslester96@gmail.com

video: fbdev: arcfb: add missed free_irq and fix the order of request_irq

The driver forgets to free irq in remove which is requested in
probe.
Add the missed call to fix it.
Also, the position of request_irq() in probe should be put before
register_framebuffer().

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324132353.21785-1-hslester96@gmail.com

fbdev: s1d13xxxfb: add missed unregister_framebuffer in remove

The driver calls register_framebuffer() in probe but does not call
unregister_framebuffer() in remove.
Rename current remove to __s1d13xxxfb_remove() for error handler.
Then add a new remove to call unregister_framebuffer().

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
[b.zolnierkie: ported over recent s1d13xxxfb changes]
[b.zolnierkie: removed extra newline]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324132311.21729-1-hslester96@gmail.com

ARM/fbdev: sa11x0: Switch to use GPIO descriptors

This converts the SA11x0 frame buffer driver to use
GPIO descriptors. Get the GPIO optional and register
a look-up table specifically for the Shannon machine.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415165055.193113-1-linus.walleij@linaro.org

video: fbdev: aty128fb: remove unused 'sdr_64'

Fix the following gcc warning:

drivers/video/fbdev/aty/aty128fb.c:337:36: warning: ‘sdr_64’ defined but
not used [-Wunused-const-variable=]
 static const struct aty128_meminfo sdr_64 = {
                                    ^~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417092318.13978-1-yanaijie@huawei.com

omapfb/dss: remove unused variable 'venc_config_pal_bdghi'

drivers/video/fbdev/omap2/omapfb/dss/venc.c:212:33:
 warning: ‘venc_config_pal_bdghi’ defined but not used [-Wunused-const-variable=]
 static const struct venc_config venc_config_pal_bdghi = {
                                 ^~~~~~~~~~~~~~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Allison Randal <allison@lohutok.net>
[b.zolnierkie: fixed typo in the patch summary]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415132350.33088-1-yuehaibing@huawei.com

video: vt8500lcdfb: fix fallthrough warning

Fix following warning:
vt8500lcdfb.c: In function 'vt8500lcd_blank':
vt8500lcdfb.c:229:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
      if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR ||
         ^
vt8500lcdfb.c:233:2: note: here
     case FB_BLANK_UNBLANK:
     ^~~~

Adding a simple "fallthrough;" fixed the warning.
The fix was build tested.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: e41f1a989408 ("fbdev: Implement simple blanking in pseudocolor modes for vt8500lcdfb")
Cc: Alexey Charkov <alchark@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: <stable@vger.kernel.org> # v2.6.38+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200412202143.GA26948@ravnborg.org

video: fbdev: imxfb: ensure balanced regulator usage

The fbdev framework doesn't care to call the .set_power callback only on
changes. So the driver has to care for itself that the regulator doesn't
get disabled more often than enabled.

This fixes the regulator warning

unbalanced disables for lcd supply

which can be triggered by doing

echo 4 > /sys/class/lcd/imxfb-lcd/lcd_power

twice.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323211626.24812-1-u.kleine-koenig@pengutronix.de

video: fbdev: controlfb: remove function prototypes part #3

Reorder code a bit and then remove no longer needed function
prototypes.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134508.25120-7-b.zolnierkie@samsung.com

video: fbdev: controlfb: remove function prototypes part #2

Reorder code a bit and then remove no longer needed function
prototypes.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134508.25120-6-b.zolnierkie@samsung.com

video: fbdev: controlfb: remove function prototypes part #1

Reorder code a bit and then remove no longer needed function
prototypes.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134508.25120-5-b.zolnierkie@samsung.com

video: fbdev: controlfb: remove obsolete module support

CONFIG_FB_CONTROL is bool, hence the Apple "control" frame buffer
driver cannot be built as a module.

Replace module_init() by device_initcall().

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134508.25120-4-b.zolnierkie@samsung.com

video: fbdev: controlfb: add COMPILE_TEST support

Add COMPILE_TEST support to controlfb driver for better compile
testing coverage.

While at it:
- convert driver to use eieio() and dcbf() helpers instead of
  open-coding them
- add invalid_vram_cache() helper to avoid code duplication

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134508.25120-3-b.zolnierkie@samsung.com

video: fbdev: controlfb: fix sparse warning about using incorrect type

Use in_le32() instead of le32_to_cpup() to fix sparse warning about
improper type of the argument.

Also drop inline keyword from control_par_to_var() prototype
(to match function definition).

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134508.25120-2-b.zolnierkie@samsung.com

video: ssd1307fb: Remove redundant forward declaration

There is no need to have forward declaration of struct ssd1307fb_par.
Drop it for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324170532.44384-5-andriy.shevchenko@linux.intel.com

video: ssd1307fb: Convert to atomic PWM API

Use the atomic API wherever appropriate and get rid of pwm_apply_args()
call (the reference period and polarity are now explicitly set when
calling pwm_apply_state()).

We also make use of the pwm_set_relative_duty_cycle() helper to ease
relative to absolute duty_cycle conversion.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324170532.44384-4-andriy.shevchenko@linux.intel.com

video: ssd1307fb: Make use of device properties

Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324170532.44384-3-andriy.shevchenko@linux.intel.com

video: ssd1307fb: Introduce temporary variable to increase readability

Introduce temporary variable to increase readability of the code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[b.zolnierkie: fix lines over 80 characters]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324170532.44384-2-andriy.shevchenko@linux.intel.com

video: ssd1307fb: Convert driver to use ->probe_new()

Use the ->probe_new() callback.

The driver does not use const struct i2c_device_id * argument,
so convert it to utilise the simplified I²C driver registration.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324170532.44384-1-andriy.shevchenko@linux.intel.com

Merge tag 'topic/phy-compliance-2020-04-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next

Topic pull request for topic/phy-compliance:
- Standardize DP_PHY_TEST_PATTERN name.
- Add support for setting/getting test pattern from sink.
- Implement DP PHY compliance to i915.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
# gpg: Signatur vom Mi 08 Apr 2020 14:46:42 CEST
# gpg:                mittels RSA-Schlüssel B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Signatur kann nicht geprüft werden: Kein öffentlicher Schlüssel
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/efb3d0d9-2cf7-046b-3a9b-2548d086258e@linux.intel.com

Merge drm/drm-next into drm-misc-next

Backmerging required to pull topic/phy-compliance.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm: Don't free a struct never allocated by drm_gem_fb_init()

drm_gem_fb_init() is passed the fb and never allocates it, so it should be
not the one freeing it. As it is now the second call to kfree() is possible
with the same fb. Coverity reported the following:

*** CID 1492613:  Memory - corruptions  (USE_AFTER_FREE)
/drivers/gpu/drm/drm_gem_framebuffer_helper.c: 230 in drm_gem_fb_create_with_funcs()
224      fb = kzalloc(sizeof(*fb), GFP_KERNEL);
225      if (!fb)
226      return ERR_PTR(-ENOMEM);
227
228      ret = drm_gem_fb_init_with_funcs(dev, fb, file, mode_cmd, funcs);
229      if (ret) {
vvv     CID 1492613:  Memory - corruptions  (USE_AFTER_FREE)
vvv     Calling "kfree" frees pointer "fb" which has already been freed. [Note: The source code implementation of the function has been overridden by a user model.]
230      kfree(fb);
231      return ERR_PTR(ret);
232      }
233
234      return fb;
235     }

drm_gem_fb_init_with_funcs() calls drm_gem_fb_init()
drm_gem_fb_init() calls kfree(fb)

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1492613 ("Memory - corruptions")
Fixes: f2b816d78a94 ("drm/core: Allow drivers allocate a subclass of struct drm_framebuffer")
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415172024.24004-1-andrzej.p@collabora.com

dt-bindings: display: move DSI panels to panel-simple-dsi

Tomi noticed that several DSI panels was wrongly
described in panel-simple.yaml.
Move them to panel-simple-dsi.yaml where they belong.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-37-sam@ravnborg.org

dt-bindings: display: convert olimex,lcd-olinuxino to DT Schema

v2:
  - use "ic2" node name in example (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-36-sam@ravnborg.org

dt-bindings: display: convert lgphilips,lb035q02 to DT Schema

v2:
  - drop use of spi-slave.yaml (Maxime)
  - added unevaluatedProperties (maxime)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-35-sam@ravnborg.org

dt-bindings: display: convert seiko,43wvf1g to DT Schema

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Marco Franchi <marco.franchi@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Marco Franchi <marco.franchi@nxp.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-34-sam@ravnborg.org

dt-bindings: display: convert sharp,lq150x1lg11 to DT Schema

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-33-sam@ravnborg.org

dt-bindings: display: convert sharp,ls037v7dw01 to DT Schema

v2:
  - Add min/maxItems to mode-gpios (Rob)
  - Fix bug in description, mode is up to three gpios (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-32-sam@ravnborg.org

dt-bindings: display: convert sharp,ls043t1le01 to DT Schema

The txt binding specified the property "power-supply".
But the example and the actual implementation in the linux-kernel
uses "avdd-supply".
So the binding is adjusted to use avdd-supply as this seems
to be the correct choice.
There are no DT files in the linux kernel to check.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Werner Johansson <werner.johansson@sonymobile.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-30-sam@ravnborg.org

dt-bindings: display: drop unused simple-panel.txt

There are no more references to simple-panel.txt.
Delete it.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-29-sam@ravnborg.org

dt-bindings: display: convert sitronix,st7789v to DT Schema

v2:
    - dropped use of spi-slave.yaml (Maxime)
    - added unevaluatedProperties (Maxime)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-28-sam@ravnborg.org

dt-bindings: display: convert sony,acx565akm to DT Schema

v2:
  - drop use of spi-slave.yaml (Maxime)
  - add unevaluatedProperties (Maxime)
  - rename node in example to panel (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-27-sam@ravnborg.org

dt-bindings: display: convert startek,startek-kd050c to DT Schema

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Marek Belisko <marek@goldelico.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-26-sam@ravnborg.org

dt-bindings: display: convert toppoly panels to DT Schema

v2:
  - dropped use of spi-slave.yaml (Maxime)
  - added unevaluatedProperties (Maxime)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Marek Belisko <marek@goldelico.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-25-sam@ravnborg.org

dt-bindings: display: convert samsung,ld9040 to DT Schema

v2:
  - drop use of spi-slave.yaml (Maxime)
  - added unevaluatedProperties (Maxime)
  - added type to width/height properties (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-23-sam@ravnborg.org

dt-bindings: display: convert samsung,s6d16d0 to DT Schema

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-22-sam@ravnborg.org

dt-bindings: display: convert samsung AMOLED to DT Schema

For samsung there was two AMOLED panels with the same
description.
Collect them in one binding file.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-21-sam@ravnborg.org

dt-bindings: display: convert raydium,rm67191 to DT Schema

v2:
  - Fix entry in MAINTAINERS
  - Add reg number to node name (Rob)
  - Fix stray spaces

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-19-sam@ravnborg.org

dt-bindings: display: convert osddisplays,osd101t2587-53ts to DT Schema

osddisplays,osd101t2587-53ts is compatible with panel-simple-dsi binding,
so list the compatible in the panel-simple-dsi binding file.

v2:
  - It is a DSI panel, move to -dsi binding (Tomi)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-18-sam@ravnborg.org

dt-bindings: display: convert lg,lg4573 to DT Schema

v2:
  - Dropped spi-slave (Maxime)
  - Added unevaluatedProperties (Maxime)
  - Deleted needless compatible from example (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Heiko Schocher <hs@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-17-sam@ravnborg.org

dt-bindings: display: convert simple lg panels to DT Schema

Add the lg panels that matches the panel-simple binding to
panel-simple.yaml

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Alexandre Courbot <acourbot@chromium.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-16-sam@ravnborg.org

dt-bindings: display: convert kingdisplay,kd097d04 to DT Schema

kingdisplay,kd097d04 matches the panel-simple-dsi binding.
The only difference is that enable-gpios is now an optional
property.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Nickey Yang <nickey.yang@rock-chips.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-15-sam@ravnborg.org

dt-bindings: display: convert kingdisplay,kd035g6-54nt to DT Schema

v2:
  - Drop use of spi-slave.yaml (Maxime)
  - Introduce unevaluatedProperties (Maxime)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-14-sam@ravnborg.org

dt-bindings: display: convert jdi,lt070me05000 to DT Schema

v2:
  - drop address in dsi node in example (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Vinay Simha BN <simhavcs@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-13-sam@ravnborg.org

dt-bindings: display: convert innolux,p120zdg-bf1 to DT Schema

v3:
  - Fix stray spaces

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sandeep Panda <spanda@codeaurora.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-12-sam@ravnborg.org