OSDN Git Service
Ulrich Weigand [Mon, 8 Oct 2007 12:57:04 +0000 (12:57 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* sh64-tdep.c (sh64_push_dummy_call, sh64_register_type)
(sh64_pseudo_register_read, sh64_pseudo_register_write)
(sh64_do_fp_register, sh64_do_pseudo_register, sh64_do_register)
(sh64_print_register, sh64_media_print_registers_info)
(sh64_compact_print_registers_info, sh64_unwind_sp)
(sh64_unwind_pc): Replace current_gdbarch by gdbarch.
(sh64_show_media_regs, sh64_show_compact_regs, sh64_frame_cache)
(sh64_frame_prev_register): Use FRAME to recognize current
architecture.
Ulrich Weigand [Mon, 8 Oct 2007 12:56:03 +0000 (12:56 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* sh-tdep.c (sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu)
(sh_sh2a_register_type, sh_sh3e_register_type, sh_sh4_register_type)
(sh_register_reggroup_p, sh_dwarf2_frame_init_reg): Replace
current_gdbarch by gdbarch.
(sh_generic_show_regs, sh3_show_reg, sh2e_show_regs, sh2a_show_regs)
(sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs)
(sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs, sh_frame_cache)
(sh_frame_prev_register, sh_unwind_sp, sh_unwind_pc): Use FRAME to
recognize current architecture.
Ulrich Weigand [Mon, 8 Oct 2007 12:55:09 +0000 (12:55 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* remote.c (init_remote_state, fetch_register_using_p)
(process_g_packet, remote_fetch_registers, remote_prepare_to_store)
(store_register_using_P, store_registers_using_G)
(remote_store_registers): Use get_regcache_arch or get_frame_arch to
get at the current architecture by regcache or by frame, respectively.
Ulrich Weigand [Mon, 8 Oct 2007 12:54:07 +0000 (12:54 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* m68k-tdep.c (m68k_register_to_value, m68k_value_to_register)
(m68k_svr4_extract_return_value, m68k_svr4_store_return_value)
(m68k_frame_prev_register, m68k_get_longjmp_target): Use
get_regcache_arch or get_frame_arch to get at the current architecture
by regcache or by frame, respectively.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
* m68klinux-nat.c (fetch_register, old_fetch_inferior_registers)
(store_register, old_store_inferior_registers, supply_gregset)
(supply_fpregset, fill_fpregset): Likewise.
* m68k-tdep.c (m68k_register_type, m68k_unwind_pc, m68k_dump_tdep):
Replace current_gdbarch by gdbarch.
Ulrich Weigand [Mon, 8 Oct 2007 12:53:07 +0000 (12:53 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* irix5-nat.c (supply_gregset, fill_gregset, supply_fpregset)
(fill_fpregset, fetch_core_registers): Use get_regcache_arch or
get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
Ulrich Weigand [Mon, 8 Oct 2007 12:51:54 +0000 (12:51 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write):
Replace current_gdbarch by gdbarch.
* ia64-tdep.c (ia64_frame_prev_register
(ia64_sigtramp_frame_prev_register)
(ia64_libunwind_frame_prev_register): Use get_regcache_arch or
get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
* ia64-linux-nat.c (ia64_linux_fetch_register)
(ia64_linux_fetch_registers, ia64_linux_store_register)
(ia64_linux_store_registers): Likewise.
Ulrich Weigand [Mon, 8 Oct 2007 12:50:56 +0000 (12:50 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* hppa-tdep.c (hppa_stub_unwind_sniffer, hppa_dump_tdep): Replace
current_gdbarch by gdbarch.
* hppa-linux-nat.c (fetch_register, store_register)
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Use get_regcache_arch or
get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
* hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code
(hppa_hpux_unwind_adjust_stub): Likewise.
* hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register)
(hppa_hpux_fetch_inferior_registers)
(hppa_hpux_store_inferior_registers): Likewise.
Ulrich Weigand [Mon, 8 Oct 2007 12:49:58 +0000 (12:49 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache)
(cris_scan_prologue, crisv32_scan_prologue, find_step_target)
(cris_software_single_step, cris_supply_gregset): Use get_regcache_arch
or get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
* cris-tdep.c (crisv32_single_step_through_delay, cris_push_dummy_call)
(cris_unwind_pc, cris_unwind_sp, cris_register_type, cris_dump_tdep)
(crisv32_register_type, cris_dwarf2_frame_init_reg): Replace
current_gdbarch by gdbarch.
Ulrich Weigand [Mon, 8 Oct 2007 12:49:03 +0000 (12:49 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* arm-tdep.c (arm_scan_prologue, arm_make_prologue_cache)
(thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value)
(arm_store_return_value): Use get_regcache_arch or get_frame_arch to
get at the current architecture by regcache or by·frame, respectively.
(arm_push_dummy_call, arm_dump_tdep): Replace current_gdbarch by
gdbarch.
Ulrich Weigand [Mon, 8 Oct 2007 12:48:05 +0000 (12:48 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* amd64-tdep.c (amd64_frame_prev_register, amd64_sigtramp_frame_cache):
Use get_regcache_arch or get_frame_arch to get at the current
architecture by regcache or by frame, respectively.
* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Likewise.
* amd64-nat.c (amd64_supply_native_gregset)
(amd64_collect_native_gregset): Replace current_gdbarch by gdbarch.
Ulrich Weigand [Mon, 8 Oct 2007 12:47:09 +0000 (12:47 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* alpha-tdep.c (alpha_register_reggroup_p): Replace current_gdbarch by
gdbarch.
* alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise.
(alpha_sigtramp_frame_unwind_cache, alpha_sigtramp_frame_this_id)
(alpha_sigtramp_frame_sniffer, alpha_next_pc): Use get_regcache_arch or
get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
* alpha-nat.c (fetch_osf_core_registers): Likewise.
Ulrich Weigand [Mon, 8 Oct 2007 12:46:09 +0000 (12:46 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* dwarf2-frame.c (read_reg, execute_cfa_program, dwarf2_frame_cache)
(dwarf2_frame_default_init_reg, dwarf2_frame_prev_register): Replace
current_gdbarch by gdbarch.
* dwarf2loc.c (dwarf2_evaluate_loc_desc): Likewise.
Ulrich Weigand [Mon, 8 Oct 2007 12:45:17 +0000 (12:45 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* regcache.c (init_regcache_descr, register_type, read_pc_pid)
(write_pc_pid, regcache_dump): Replace current_gdbarch by gdbarch.
* regcache.c (regcache_raw_write): Use get_regcache_arch or
get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
Ulrich Weigand [Mon, 8 Oct 2007 12:44:09 +0000 (12:44 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* findvar.c (value_of_register, locate_var_value): Use
get_regcache_arch or get_frame_arch to get at the current architecture
by regcache or by frame, respectively.
* findvar.c (default_value_from_register, value_from_register): Replace
current_gdbarch by gdbarch.
Daniel Jacobowitz [Mon, 8 Oct 2007 12:41:25 +0000 (12:41 +0000)]
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (ALL_SUBDIRS): Add gdb.pascal.
* configure.ac (AC_OUTPUT): Add gdb.pascal/Makefile.
* configure: Regenerated.
* gdb.pascal/Makefile.in, gdb.pascal/hello.exp, gdb.pascal/hello.pas,
gdb.pascal/types.exp, lib/pascal.exp: New files.
Denis Pilat [Mon, 8 Oct 2007 11:51:31 +0000 (11:51 +0000)]
2007-09-24 Andrew Stubbs <andrew.stubbs@st.com>
* gencode.c (tab): Add RAISE_EXCEPTION_IF_IN_DELAY_SLOT to the
definition of PC relative 'mov.l'/'mov.w' and also 'mova'.
Nick Clifton [Mon, 8 Oct 2007 09:30:35 +0000 (09:30 +0000)]
* configure.ac (CFLAGS_FOR_BUILD, CXXFLAGS_FOR_BUILD, LDFLAGS_FOR_BUILD): Default them to host flags
only for $host = $build.
Set default CXXFLAGS_FOR_BUILD to CXXFLAGS, not CFLAGS.
Set default LDFLAGS_FOR_BUILD to LDFLAGS, not CFLAGS.
* configure: Regenerate.
Pierre Muller [Mon, 8 Oct 2007 07:49:56 +0000 (07:49 +0000)]
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
* config/i386/nm-i386.h (CHILD_POST_STARTUP_INFERIOR): ARI fix: Remove.
Pierre Muller [Mon, 8 Oct 2007 07:43:43 +0000 (07:43 +0000)]
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
* linux-fork.c: ARI fix: include "gdb_wait.h" instead of <sys/wait.h>.
Makefile.in (linux-fork.o): Add gdb_wait.h dependency.
gdbadmin [Mon, 8 Oct 2007 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 8 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
Richard Sandiford [Sun, 7 Oct 2007 09:04:43 +0000 (09:04 +0000)]
sim/mips/
* mips.igen (ll): Fix mask for WITH_TARGET_WORD_BITSIZE == 32.
(sc, swxc1): Likewise. Also fix big-endian and reverse-endian
shifts for that case.
gdbadmin [Sun, 7 Oct 2007 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 7 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
Alan Modra [Sat, 6 Oct 2007 00:00:07 +0000 (00:00 +0000)]
daily update
gdbadmin [Sat, 6 Oct 2007 00:00:04 +0000 (00:00 +0000)]
*** empty log message ***
Daniel Jacobowitz [Fri, 5 Oct 2007 21:36:00 +0000 (21:36 +0000)]
* remote.c (get_offsets): Only call free_symfile_segment_data if
data was allocated.
Bob Wilson [Fri, 5 Oct 2007 19:05:35 +0000 (19:05 +0000)]
* elf32-xtensa.c (relax_section): Call pin_internal_relocs when
changing a relocation's offset. Adjust call to translate_reloc. Do
not add a fix record for a DIFF reloc. For other relocs, only add a
fix record if the translated target is in a different object file;
otherwise, just update the relocation. Call pin_internal_relocs when
updating a reloc but not when adding a fix record.
(translate_reloc): Get the target section from a new argument, not
from the relocation. Change check for relaxable sections to an
assertion. Compute separate offset adjustments for the base symbol
and the addend, and set the new relocation's addend correctly. Return
the new target section.
H.J. Lu [Fri, 5 Oct 2007 19:04:06 +0000 (19:04 +0000)]
gas/testsuite/
2007-10-05 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run smx.
* gas/i386/smx.d: New.
* gas/i386/smx.s: Likewise.
opcodes/
2007-10-05 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (dis386_twobyte): Add getsec.
* i386-gen.c (cpu_flags): Add CpuSMX.
* i386-opc.h (CpuSMX): New.
(CpuSSSE3): Updated.
(i386_cpu_flags): Add cpusmx.
* i386-opc.tbl: Add getsec.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
Bob Wilson [Fri, 5 Oct 2007 18:18:23 +0000 (18:18 +0000)]
* elf32-xtensa.c (elf_xtensa_relocate_section): Remove updates of
r_type and howto after calling do_fix_for_relocateable_link and
do_fix_for_final_link.
Bob Wilson [Fri, 5 Oct 2007 18:09:57 +0000 (18:09 +0000)]
* elf32-xtensa.c (removed_by_actions): New.
(offset_with_removed_text): Reimplement using removed_by_actions.
(offset_with_removed_text_before_fill): Delete.
(relax_property_section): Use removed_by_actions. Rearrange logic.
(relax_section_symbols): Likewise.
H.J. Lu [Fri, 5 Oct 2007 16:28:16 +0000 (16:28 +0000)]
2007-10-05 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (reg_table): Use "{ XX }" on "(bad)".
(prefix_table): Likewise.
Pierre Muller [Fri, 5 Oct 2007 06:46:05 +0000 (06:46 +0000)]
2007-10-03 Pierre Muller <muller@ics.u-strasbg.fr>
* objc-exp.y: ARI fix: remove 4 PARAMS.
gdbadmin [Fri, 5 Oct 2007 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Fri, 5 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
H.J. Lu [Thu, 4 Oct 2007 22:02:10 +0000 (22:02 +0000)]
gas/testsuite/
2007-10-04 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/simd.s: Add tests for unpckhpd and unpckhps.
* gas/i386/x86-64-simd.s: Likewise.
* gas/i386/simd-intel.d: Updated.
* gas/i386/simd.d: Likewise.
* gas/i386/x86-64-simd-intel.d: Likewise.
* gas/i386/x86-64-simd.d: Likewise.
opcodes/
2007-10-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (dis386_twobyte): Use EXx instead of EXq on
unpckhpX and unpckhpX.
David Daney [Thu, 4 Oct 2007 21:53:06 +0000 (21:53 +0000)]
opcodes/
2007-10-04 David Daney <ddaney@avtrex.com>
* mips-opc.c (mips_builtin_opcodes): Mark lwxc1 as working on FP_S
registers.
gas/testsuite/
2007-10-04 David Daney <ddaney@avtrex.com>
* gas/mips/odd-float.d, gas/mips/odd-float.s: New test.
* gas/mips/mips.exp: Run it.
H.J. Lu [Thu, 4 Oct 2007 21:02:38 +0000 (21:02 +0000)]
2007-10-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (MOD_0F12_PREFIX_0): Use "movlps" and "movhlps"
instead of "movlpX" and "movhlpX", respectively.
(MOD_0F16_PREFIX_0): Use "movhps" and "movlhps" instead of
"movhpX" and "movlhpX", respectively.
Bob Wilson [Thu, 4 Oct 2007 17:15:29 +0000 (17:15 +0000)]
* elf32-xtensa.c (reloc_bfd_fix_struct): Delete target_abfd field.
(reloc_bfd_fix_init): Remove target_abfd argument.
(relax_section, move_literal): Adjust calls to reloc_bfd_fix_init.
Nick Clifton [Thu, 4 Oct 2007 14:06:40 +0000 (14:06 +0000)]
* configure.in (WIN32LDFLAGS): Rename to SHARED_LDFLAGS.
(WIN32LIBADD): Rename to SHARED_LIBADD
(SHARED_DEPENDENCIES): New exported variable.
(enable_shared): Add dependency upon libbfd.la for non-cygwin based shared library builds.
* Makefile.am (libopcodes_la_DEPENDENCIES): Append SHARED_DEPENDENCIES.
(libopcodes_la_LIBADD): Rename WIN32LIBADD to SHARED_LIBADD.
(libopcodes_la_LDFLAGS): Rename WIN32LDFLAGS to SHARED_LDFLAGS.
* configure: Regenerate.
* Makefile.in: Regenerate.
Nick Clifton [Thu, 4 Oct 2007 13:43:16 +0000 (13:43 +0000)]
PR gas/5100
* arc-opc.c (insert_offset): Fix spelling mistake in error message.
Nick Clifton [Thu, 4 Oct 2007 13:41:29 +0000 (13:41 +0000)]
PR linker/5099
* elf64-x86-64.c (elf64_x86_64_check_relocs): Add missing apostrophe to error message.
Alan Modra [Thu, 4 Oct 2007 00:00:06 +0000 (00:00 +0000)]
daily update
gdbadmin [Thu, 4 Oct 2007 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Daniel Jacobowitz [Wed, 3 Oct 2007 20:42:08 +0000 (20:42 +0000)]
* NEWS: Use uniform spacing. Correct version number for GDB 6.7
news. Mention XML support for M68K in GDB 6.7.
Daniel Jacobowitz [Wed, 3 Oct 2007 20:37:31 +0000 (20:37 +0000)]
* gdbtypes.c (create_range_type): Do not set TYPE_FIELD_TYPE for the
bounds.
(init_vector_type): Use builtin_type_int32.
H.J. Lu [Wed, 3 Oct 2007 19:30:44 +0000 (19:30 +0000)]
2007-10-03 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_REG): Set add to 0 only when needed.
(OP_C): Likewise.
(OP_D): Likewise.
(OP_MMX): Likewise.
(OP_XMM): Likewise.
(OP_EM): Likewise.
(OP_MXC): Likewise.
(OP_EX): Likewise.
H.J. Lu [Wed, 3 Oct 2007 19:03:20 +0000 (19:03 +0000)]
2007-10-03 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Update SSE comments.
Kazu Hirata [Wed, 3 Oct 2007 14:35:31 +0000 (14:35 +0000)]
* no-executables.m4 (GCC_TRY_COMPILE_OR_LINK): New function.
Alan Modra [Wed, 3 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Wed, 3 Oct 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Ulrich Weigand [Tue, 2 Oct 2007 19:25:52 +0000 (19:25 +0000)]
* s390-tdep.c (s390_regset_from_core_section): Allow excess section
size to enable bi-arch generate-core-file support.
Ulrich Weigand [Tue, 2 Oct 2007 17:34:32 +0000 (17:34 +0000)]
2007-10-02 Markus Deuling <deuling@de.ibm.com>
* spu-tdep.c (info_spu_signal_command): Fix output for SPU signal.
Ulrich Weigand [Tue, 2 Oct 2007 16:50:08 +0000 (16:50 +0000)]
2007-10-02 Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
* tui/tui-interp.c (tui_init): Initialize tui's SIGWINCH
signal handler.
* tui/tui-win.c (tui_initialize_win): New function for
initializing tui's SIGWINCH signal handler.
* tui/tui-win.h (tui_initialize_win): Declare.
Ulrich Weigand [Tue, 2 Oct 2007 16:39:29 +0000 (16:39 +0000)]
* ppc-linux-nat.c (ppc_linux_stopped_data_address): Cast
pointer to uintptr_t before casting to CORE_ADDR.
Ulrich Weigand [Tue, 2 Oct 2007 16:33:35 +0000 (16:33 +0000)]
2007-10-02 Markus Deuling <deuling@de.ibm.com>
* linux-nat.c (PTRACE_GETSIGINFO): Add define.
Daniel Jacobowitz [Tue, 2 Oct 2007 16:09:53 +0000 (16:09 +0000)]
2007-10-02 Mark Mitchell <mark@codesourcery.com>
* mingw-hdep.c (gdb_select): Stop helper threads before returning.
* ser-mingw.c (enum select_thread_state): New type.
(struct ser_console_state): Add have_started and thread_state.
(select_thread_wait): New function.
(thread_fn_type): New type.
(create_select_thread): New function.
(destroy_select_thread): Likewise.
(start_select_thread): Likewise.
(stop_select_thread): Likewise.
(console_select_thread): Use new functions.
(pipe_select_thread): Likewise.
(file_select_thread): Likewise.
(ser_console_wait_handle): Likewise.
(ser_console_done_wait_handle): Likewise.
(ser_console_close): Likewise.
(free_pipe_state): Likewise.
(pipe_wait_handle): Likewise.
(pipe_done_wait_handle): Likewise.
(struct net_windows_state): Derive from ser_console_state.
(net_windows_select_thread): Use new functions.
(net_windows_wait_handle): Likewise.
(net_windows_done_wait_handle): Likewise.
(net_windows_close): Likewise.
Daniel Jacobowitz [Tue, 2 Oct 2007 15:56:51 +0000 (15:56 +0000)]
* inflow.c (terminal_ours_1): Remove useless line.
Daniel Jacobowitz [Tue, 2 Oct 2007 15:17:44 +0000 (15:17 +0000)]
* mips-tdep.c (mips_read_fp_register_double): Correct check for
odd FP registers.
(mips_print_fp_register): Correct check for even FP registers.
(mips_virtual_frame_pointer): New function.
(mips_gdbarch_init): Call set_gdbarch_virtual_frame_pointer.
Daniel Jacobowitz [Tue, 2 Oct 2007 14:57:46 +0000 (14:57 +0000)]
* gdb.cp/classes.exp (do_tests): Always step to the line after the
call.
* gdb.mi/mi-simplerun.exp (test_controlled_execution): Allow finish
to return to the call.
* gdb.mi/mi2-simplerun.exp (test_controlled_execution): Likewise.
* gdb.mi/mi-return.exp (test_return_simple): Likewise.
* gdb.mi/mi2-return.exp (test_return_simple): Likewise.
* gdb.mi/mi-until.exp (test_until): Likewise.
* gdb.mi/mi2-until.exp (test_until): Likewise.
gdbadmin [Tue, 2 Oct 2007 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 2 Oct 2007 00:00:01 +0000 (00:00 +0000)]
daily update
H.J. Lu [Mon, 1 Oct 2007 22:23:20 +0000 (22:23 +0000)]
2007-10-01 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (THREE_BYTE_0FBA): Renamed to ...
(THREE_BYTE_0F7B): This.
(dis386_twobyte): Updated.
(three_byte_table): Updated comments.
Nick Clifton [Mon, 1 Oct 2007 15:55:44 +0000 (15:55 +0000)]
Various CR16 fixes
Daniel Jacobowitz [Mon, 1 Oct 2007 14:07:46 +0000 (14:07 +0000)]
* gdb.mi/var-cmd.c (do_locals_tests): Define lcharacter as a
two-char array.
* gdb.mi/mi-var-cmd.exp, gdb.mi/mi2-var-cmd.exp: Use lcharacter[0].
Paolo Bonzini [Mon, 1 Oct 2007 09:04:55 +0000 (09:04 +0000)]
regenerate configure
Paolo Bonzini [Mon, 1 Oct 2007 07:55:48 +0000 (07:55 +0000)]
2007-10-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (AR_FOR_BUILD, AS_FOR_BUILD, CXX_FOR_BUILD,
DLLTOOL_FOR_BUILD, GCJ_FOR_BUILD, GFORTRAN_FOR_BUILD,
LDFLAGS_FOR_BUILD, LD_FOR_BUILD, NM_FOR_BUILD, RANLIB_FOR_BUILD,
WINDMC_FOR_BUILD, WINDRES_FOR_BUILD): Use autoconf substitutions.
* configure.ac: Default them to host tools for $host = $build.
Subst them.
* configure: Regenerate.
* Makefile.in: Regenerate.
Mike Frysinger [Mon, 1 Oct 2007 01:39:52 +0000 (01:39 +0000)]
2007-09-30 Mike Frysinger <vapier@gentoo.org>
* value.h (lookup_only_internalvar): New prototype.
(create_internalvar): Likewise.
* value.c (lookup_only_internalvar): New function.
(create_internalvar): Likewise.
(lookup_internalvar): Use new lookup_only_internalvar and
create_internalvar functions.
* parse.c (write_dollar_variable): Look up $ symbols in internal
table first rather than last.
Daniel Jacobowitz [Mon, 1 Oct 2007 00:22:50 +0000 (00:22 +0000)]
* linux-nat.c (linux_nat_new_thread): New variable.
(linux_child_follow_fork): Set inferior_ptid to include LWP ID. Use
linux_nat_switch_fork.
(lwp_list): Make public.
(add_lwp): Call linux_nat_new_thread.
(lin_lwp_attach_lwp, linux_nat_attach): Call add_lwp after stopping
the new thread.
(resume_callback): Clear lp->siginfo. Remove unused variable.
(linux_nat_resume): Assert that the LWP list is already initialized.
Clear lp->siginfo.
(save_siginfo): New.
(stop_wait_callback, linux_nat_wait): Call it.
(linux_nat_set_new_thread, linux_nat_get_siginfo): New.
* linux-nat.h (struct lwp_info): Add siginfo.
(lwp_list, linux_nat_set_new_thread, linux_nat_get_siginfo): Declare.
(ALL_LWPS): Define.
* amd64-linux-nat.c (amd64_linux_dr): New.
(amd64_linux_dr_get): Take a PTID argument. Correct typo.
(amd64_linux_dr_set): Take a PTID argument.
(amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use ALL_LWPS.
(amd64_linux_dr_reset_addr): Use amd64_linux_dr_set_addr.
(amd64_linux_dr_get_status): Pass inferior_ptid to amd64_linux_dr_get.
(amd64_linux_new_thread): New.
(_initialize_amd64_linux_nat): Call linux_nat_set_new_thread.
* i386-linux-nat.c (i386_linux_dr): New.
(i386_linux_dr_get, i386_linux_dr_set): Take a PTID argument.
(i386_linux_dr_set_control, i386_linux_dr_set_addr): Use ALL_LWPS.
(i386_linux_dr_reset_addr): Use i386_linux_dr_set_addr.
(i386_linux_dr_get_status): Pass inferior_ptid to i386_linux_dr_get.
(i386_linux_new_thread): New.
(i386_linux_resume): Remove unnecessary PID check.
(_initialize_i386_linux_nat): Call linux_nat_set_new_thread.
* ia64-linux-nat.c (enable_watchpoints_in_psr): Take PTID argument.
(fetch_debug_register, fetch_debug_register_pair): Delete.
(debug_registers): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint): Use
ALL_LWPS and debug_registers.
(ia64_linux_new_thread): New.
(ia64_linux_stopped_data_address): Use linux_nat_get_siginfo.
(_initialize_ia64_linux_nat): Call linux_nat_set_new_thread.
* ppc-linux-nat.c (last_stopped_data_address): Delete.
(saved_dabr_value): New.
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
ALL_LWPS.
(ppc_linux_new_thread): New.
(ppc_linux_stopped_data_address): Use linux_nat_get_siginfo.
(ppc_linux_stopped_by_watchpoint): Call ppc_linux_stopped_data_address.
(_initialize_ppc_linux_nat): Call linux_nat_set_new_thread.
* s390-nat.c (s390_stopped_by_watchpoint): Clear the watchpoint status
after reading it.
(s390_fix_watch_points): Take a PTID argument.
(s390_insert_watchpoint, s390_remove_watchpoint): Use ALL_LWPS.
(_initialize_s390_nat): Call linux_nat_set_new_thread.
Daniel Jacobowitz [Mon, 1 Oct 2007 00:17:58 +0000 (00:17 +0000)]
2007-09-16 Daniel Jacobowitz <dan@codesourcery.com>
Jeff Johnston <jjohnstn@redhat.com>
* breakpoint.c (watchpoints_triggered): New.
(bpstat_stop_status): Remove STOPPED_BY_WATCHPOINT argument.
Check watchpoint_triggered instead. Combine handling for software
and hardware watchpoints. Do not use target_stopped_data_address
here. Always check a watchpoint if its scope breakpoint triggers.
Do not stop for thread or overlay events. Improve check for
triggered watchpoints without a value change.
(watch_command_1): Insert the scope breakpoint first. Link the
scope breakpoint to the watchpoint.
* breakpoint.h (enum watchpoint_triggered): New.
(struct breakpoint): Add watchpoint_triggered.
(bpstat_stop_status): Update prototype.
(watchpoints_triggered): Declare.
* infrun.c (enum infwait_status): Add infwait_step_watch_state.
(stepped_after_stopped_by_watchpoint): Delete.
(handle_inferior_event): Make stepped_after_stopped_by_watchpoint
local. Handle infwait_step_watch_state. Update calls to
bpstat_stop_status. Use watchpoints_triggered to check
watchpoints.
* remote.c (stepped_after_stopped_by_watchpoint): Remove extern.
(remote_stopped_data_address): Do not check it.
* gdb.texinfo (Setting Watchpoints): Adjust warning text about
multi-threaded watchpoints.
* gdbint.texinfo (Watchpoints): Describe how watchpoints are
checked. Describe sticky notification. Expand description
of steppable and continuable watchpoints.
(Watchpoints and Threads): New subsection.
* gdb.threads/watchthreads.c (thread_function): Sleep between
iterations.
* gdb.threads/watchthreads.exp: Allow two watchpoints to trigger
at once for S/390. Generate matching fails and passes.
gdbadmin [Mon, 1 Oct 2007 00:00:37 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 1 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
H.J. Lu [Sun, 30 Sep 2007 19:14:47 +0000 (19:14 +0000)]
2007-09-30 H.J. Lu <hongjiu.lu@intel.com>
* 386-dis.c (prefix_table): Reformat comment.
Alan Modra [Sun, 30 Sep 2007 13:43:23 +0000 (13:43 +0000)]
* elflink.c: Formatting.
Alan Modra [Sun, 30 Sep 2007 13:33:03 +0000 (13:33 +0000)]
bfd/
* elflink.c (resolve_symbol): Handle symbols in SEC_MERGE
sections. Don't test symbol st_shndx. Don't bother with
bfd_link_hash_common symbols. Print longs rather than ints
in debug messages.
(eval_symbol): Replace "sym" and "advanced" params with "symp".
Replace "addr" and "section_offset" params with "dot". Don't
cast bfd_vma values to signed, cast them to bfd_signed_vma.
(bfd_elf_perform_complex_relocation): Delete "output_bfd", "info",
"local_syms" and "local_sections" params. Add "relocation".
Delete code calculating relocation value.
(evaluate_complex_relocation_symbols): Delete function. Fold into..
(elf_link_input_bfd): ..existing code examining relocs.
* elf-bfd.h (bfd_elf_perform_complex_relocation): Update prototype.
* elf32-mep.c (mep_elf_check_relocs): Delete function.
(mep_elf_gc_sweep_hook, mep_elf_gc_mark_hook): Likewise.
(mep_elf_object_p): Don't set elf_bad_symtab.
(elf_backend_check_relocs): Don't define.
(elf_backend_gc_mark_hook, elf_backend_gc_sweep_hook): Likewise.
(elf_backend_can_gc_sections, USE_RELA): Likwise.
(mep_elf_relocate_section): Move bfd_elf_perform_complex_relocation
call after we have calculated reloc value. Delete local sym
debug code. Use RELOC_FOR_GLOBAL_SYMBOL. Delete addend
adjusting code..
(elf_backend_rela_normal): ..instead define this.
ld/testsuite/
* ld-selective/sel-dump.exp: Add am33, m88k, mep to xfails.
* ld-selective/selective.exp: Don't run for same target list
we xfail sel-dump.
Alan Modra [Sun, 30 Sep 2007 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Sun, 30 Sep 2007 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Daniel Jacobowitz [Sat, 29 Sep 2007 20:53:46 +0000 (20:53 +0000)]
* configure.ac: Add $LIBINTL when testing libbfd.
* configure: Regenerated.
H.J. Lu [Sat, 29 Sep 2007 14:43:44 +0000 (14:43 +0000)]
2007-09-29 H.J. Lu <hongjiu.lu@intel.com>
* 386-dis.c (USE_GROUPS): Renamed to ...
(USE_REG_TABLE): This.
(USE_OPC_EXT_TABLE): Renamed to ...
(USE_MOD_TABLE): This.
(USE_OPC_EXT_RM_TABLE): Renamed to ...
(USE_RM_TABLE): This.
(USE_XXX_TABLE): Reordered.
(GRP): Renamed to ...
(REG_TABLE): This.
(OPC_EXT_TABLE): Renamed to ...
(MOD_TABLE): This.
(OPC_EXT_RM_TABLE): Renamed to ...
(RM_TABLE): This.
(GRP_XXX): Renamed to ...
(REG_XXX): This.
(PREGRP_XXX): Renamed to ...
(PREFIX_XXX): This.
(OPC_EXT_XXX): Renamed to ...
(MOD_XXX): This.
(OPC_EXT_RM_XXX): Renamed to ...
(RM_XXX): This.
(grps): Renamed to ...
(reg_table): This
(prefix_user_table): Renamed to ...
(prefix_table): This
(opc_ext_table): Renamed to ...
(mod_table): This
(opc_ext_rm_table): Renamed to ...
(rm_table): This
(OPC_EXT_RM_XXX): Likewise.
(dis386): Updated.
(dis386_twobyte): Likewise.
(reg_table): Likewise.
(prefix_table): Likewise.
(x86_64_table): Likewise.
(three_byte_table): Likewise.
(mod_table): Likewise.
(rm_table): Likewise.
(get_valid_dis386): Likewise.
Alan Modra [Sat, 29 Sep 2007 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Sat, 29 Sep 2007 00:00:04 +0000 (00:00 +0000)]
*** empty log message ***
H.J. Lu [Fri, 28 Sep 2007 20:50:59 +0000 (20:50 +0000)]
2007-09-28 H.J. Lu <hongjiu.lu@intel.com>
* 386-dis.c (USE_PREFIX_USER_TABLE): Renamed to ...
(USE_PREFIX_TABLE): This.
(X86_64_SPECIAL): Renamed to ...
(USE_X86_64_TABLE): This.
(IS_3BYTE_OPCODE): Renamed to ...
(USE_3BYTE_TABLE): This.
(GRPXXX): Removed.
(PREGRPXXX): Likewise.
(X86_64_XXX): Likewise.
(THREE_BYTE_XXX): Likewise.
(OPC_EXT_XXX): Likewise.
(OPC_EXT_RM_XXX): Likewise.
(DIS386): New.
(GRP): Likewise.
(PREGRP): Likewise.
(X86_64_TABLE): Likewise.
(THREE_BYTE_TABLE): Likewise.
(OPC_EXT_TABLE): Likewise.
(OPC_EXT_RM_TABLE): Likewise.
(GRP_XXX): Likewise.
(PREGRP_XXX): Likewise.
(X86_64_XXX): Likewise.
(THREE_BYTE_XXX): Likewise.
(OPC_EXT_XXX): Likewise.
(OPC_EXT_RM_XXX): Likewise.
(dis386): Updated.
(dis386_twobyte): Likewise.
(grps): Likewise.
(prefix_user_table): Likewise.
(x86_64_table): Likewise.
(three_byte_table): Likewise.
(opc_ext_table): Likewise.
(opc_ext_rm_table): Likewise.
(get_valid_dis386): Likewise.
Eli Zaretskii [Fri, 28 Sep 2007 11:09:55 +0000 (11:09 +0000)]
(Set Breaks): Fix a typo.
Alan Modra [Fri, 28 Sep 2007 08:43:45 +0000 (08:43 +0000)]
* elf-m10300.c (mn10300_elf_check_relocs): Delete dead code.
* elf32-arm.c (elf32_arm_check_relocs): Likewise.
* elf32-avr.c (elf32_avr_check_relocs): Likewise.
* elf32-bfin.c (bfinfdpic_check_relocs): Likewise.
* elf32-cris.c (cris_elf_check_relocs): Likewise.
* elf32-d10v.c (elf32_d10v_check_relocs): Likewise.
* elf32-dlx.c (elf32_dlx_check_relocs): Likewise.
* elf32-fr30.c (fr30_elf_check_relocs): Likewise.
* elf32-frv.c (_frvfdpic_check_discarded_relocs): Likewise.
(elf32_frv_check_relocs): Likewise.
* elf32-iq2000.c (iq2000_elf_check_relocs): Likewise.
* elf32-m32c.c (m32c_elf_check_relocs): Likewise.
* elf32-m32r.c (m32r_elf_check_relocs): Likewise.
* elf32-m68hc1x.c (elf32_m68hc11_check_relocs): Likewise.
* elf32-mcore.c (mcore_elf_check_relocs): Likewise.
* elf32-msp430.c (elf32_msp430_check_relocs): Likewise.
* elf32-mt.c (mt_elf_check_relocs): Likewise.
* elf32-openrisc.c (openrisc_elf_check_relocs): Likewise.
* elf32-sh.c (sh_elf_check_relocs): Likewise.
* elf64-mmix.c (mmix_elf_check_relocs): Likewise.
* elf64-sh64.c (sh_elf64_check_relocs): Likewise.
* elf32-score.c (_bfd_score_elf_check_relocs): Likewise.
(score_elf_local_relocation_p): Likewise.
(_bfd_score_elf_relocate_section): Likewise.
(score_elf_final_link_relocate): Likewise.
Vladimir Prus [Fri, 28 Sep 2007 06:24:20 +0000 (06:24 +0000)]
* NEW: Mention pending breakpoint changes and
support for breakpoints at multiple locations.
* gdb.texinfo (Setting Breakpoints): Revise
documentation for pending breakpoints. Document
breakpoints with multiple locations.
gdbadmin [Fri, 28 Sep 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
H.J. Lu [Thu, 27 Sep 2007 21:53:28 +0000 (21:53 +0000)]
2007-09-27 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (dis386): Swap X86_64_27 with OPC_EXT_2.
(x86_64_table): Likewise.
(opc_ext_table): Likewise.
Daniel Jacobowitz [Thu, 27 Sep 2007 18:48:33 +0000 (18:48 +0000)]
* arm-linux-tdep.c (arm_linux_software_single_step): New.
(arm_linux_init_abi): Use it.
* arm-tdep.c (arm_get_next_pc): Make global. Handle all-ones
condition correctly.
* arm-tdep.h (arm_get_next_pc): Declare.
* Makefile.in (arm-linux-tdep.o): Update.
H.J. Lu [Thu, 27 Sep 2007 18:31:51 +0000 (18:31 +0000)]
gas/testsuite/gas/
2007-09-27 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/5072
* gas/i386/i386.exp: Run x86-64-opcode-inval and
x86-64-opcode-inval-intel.
* gas/i386/x86-64-opcode-inval-intel.d: New.
* gas/i386/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval.s: Likewise.
opcodes/
2007-09-27 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/5072
* i386-dis.c: Update comments on '{', '}' and '|' to support
only AT&T and Intel modes.
(X86_64_4...X86_64_27): New.
(dis386): Updated. Use X86_64_4...X86_64_21.
(dis386_twobyte): Updated.
(float_mem): Likewise.
(x86_64_table): Add X86_64_4...X86_64_27.
(opc_ext_table): Updated. Use X86_64_22 and X86_64_27.
(putop): Updated handling of '{', '}' and '|' to support only
AT&T and Intel modes.
Vladimir Prus [Thu, 27 Sep 2007 18:04:12 +0000 (18:04 +0000)]
* varobj.c (install_new_value): Don't
call value_get_print_value when a value is
lazy. Update the print_value member in a
single place.
Vladimir Prus [Thu, 27 Sep 2007 12:44:08 +0000 (12:44 +0000)]
Undo this part of previous checkin:
* gdb.mi/mi2-var-child.exp: Step over said
initialization.
It's not necessary, and breaks the test.
Vladimir Prus [Thu, 27 Sep 2007 12:25:20 +0000 (12:25 +0000)]
* gdb.mi/var-cmd.c (do_children_tests): Initialize
the 'struct_declarations' variable to zeros.
* gdb.mi/mi2-var-child.exp: Step over said
initialization.
Kazu Hirata [Thu, 27 Sep 2007 11:14:10 +0000 (11:14 +0000)]
gas/
* config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
(last_movec_reg): Change to MBO.
* config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
(m68k_ip): Use MBO instead of MBO.
(init_table): Use MBO instead of MBO. Add an entry for mbo.
gas/testsuite/
* gas/m68k/fido.s: Add tests for %mbo.
* gas/m68k/fido.d: Update accordingly.
opcodes/
* m68k-dis.c (print_insn_arg): Use %mbo instead of %mbb.
gdbadmin [Thu, 27 Sep 2007 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 27 Sep 2007 00:00:05 +0000 (00:00 +0000)]
daily update
Vladimir Prus [Wed, 26 Sep 2007 18:44:55 +0000 (18:44 +0000)]
* breakpoint.c (create_breakpoint): Set
condition on each location, not on the first
location of breakpoint.
Jim Blandy [Wed, 26 Sep 2007 18:32:54 +0000 (18:32 +0000)]
* remote.c (getpkt_sane): Fix error message. No animals were
harmed in the making of this debugger.
Jim Wilson [Wed, 26 Sep 2007 18:11:04 +0000 (18:11 +0000)]
Fix typo in last patch.
Nick Clifton [Wed, 26 Sep 2007 16:07:18 +0000 (16:07 +0000)]
* mt-asm.c (parse_imm16): Reword error message in order to allow it to be translated properly.
* ia64-gen.c (print_dependency_table): Likewise.
* mips-dis.c (print_insn_args): Likewise.
Pierre Muller [Wed, 26 Sep 2007 15:37:16 +0000 (15:37 +0000)]
2007-09-26 Pierre Muller <muller@ics.u-strasbg.fr>
* p-typeprint.c: Fix 11 ARI reported problems.
(pascal_print_type): Fix 4 operator at end of line.
(pascal_type_print_method_args) : Replace 2 DEPRECATED_STREQN macros
using strncmp function.
(pascal_type_print_base): Fix 2 operator at end of line.
(pascal_type_print_base) : Replace 3 DEPRECATED_STREQN macros
using strncmp function.