OSDN Git Service
Christian König [Wed, 28 Jul 2021 17:51:50 +0000 (19:51 +0200)]
dma-buf: nuke seqno-fence
Entirely unused.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729070330.41443-1-christian.koenig@amd.com
Thierry Reding [Thu, 10 Jun 2021 11:12:36 +0000 (13:12 +0200)]
drm/tegra: Use fourcc_mod_is_vendor() helper
Rather than open-coding the vendor extraction operation, use the newly
introduced helper macro.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610111236.3814211-3-thierry.reding@gmail.com
Thierry Reding [Thu, 10 Jun 2021 11:12:35 +0000 (13:12 +0200)]
drm/arm: malidp: Use fourcc_mod_is_vendor() helper
Rather than open-coding the vendor extraction operation, use the newly
introduced helper macro.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610111236.3814211-2-thierry.reding@gmail.com
Thierry Reding [Thu, 10 Jun 2021 11:12:34 +0000 (13:12 +0200)]
drm/fourcc: Add macros to determine the modifier vendor
When working with framebuffer modifiers, it can be useful to extract the
vendor identifier or check a modifier against a given vendor identifier.
Add one macro that extracts the vendor identifier and a helper to check
a modifier against a given vendor identifier.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610111236.3814211-1-thierry.reding@gmail.com
Desmond Cheong Zhi Xi [Fri, 13 Aug 2021 08:54:50 +0000 (16:54 +0800)]
drm: unexport drm_ioctl_permit
Since the last user of drm_ioctl_permit was removed, and it's now only
used in drm_ioctl.c, unexport the symbol.
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210813085450.32494-3-desmondcheongzx@gmail.com
Markuss Broks [Sat, 7 Aug 2021 13:31:11 +0000 (16:31 +0300)]
drm/panel: s6d27a1: Add driver for Samsung S6D27A1 display panel
This adds a driver for Samsung S6D27A1 display controller and panel.
This panel is found in the Samsung GT-I8160 mobile phone,
and possibly some other mobile phones.
This display needs manufacturer commands to configure it;
the commands used in this driver were taken from downstream driver
by Gareth Phillips; sadly, there is almost no documentation on what they
actually do.
This driver re-uses the DBI infrastructure to communicate with the display.
This driver is heavily based on WideChips WS2401 display controller
driver by Linus Walleij and on other panel drivers for reference.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
[Up reset out time to 120 ms]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210807133111.5935-3-markuss.broks@gmail.com
Markuss Broks [Sat, 7 Aug 2021 13:31:10 +0000 (16:31 +0300)]
drm/panel: Add DT bindings for Samsung S6D27A1 display panel
This adds device-tree bindings for the Samsung S6D27A1 RGB
DPI display panel.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
v1 -> v2:
changed additionalProperties to unevaluatedProperties;
added vci-supply and vccio-supply as required;
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210807133111.5935-2-markuss.broks@gmail.com
Daniel Vetter [Thu, 12 Aug 2021 13:14:12 +0000 (15:14 +0200)]
drm/vgem: use shmem helpers
Aside from deleting lots of code the real motivation here is to switch
the mmap over to VM_PFNMAP, to be more consistent with what real gpu
drivers do. They're all VM_PFNMAP, which means get_user_pages doesn't
work, and even if you try and there's a struct page behind that,
touching it and mucking around with its refcount can upset drivers
real bad.
v2: Review from Thomas:
- sort #include
- drop more dead code that I didn't spot somehow
v3: select DRM_GEM_SHMEM_HELPER to make it build (intel-gfx-ci)
v4: I got tricked by
0cf2ef46c6c0 ("drm/shmem-helper: Use cached
mappings by default"), and we need WC in vgem because vgem doesn't
have explicit begin/end cpu access ioctls.
Also add a comment why exactly vgem has to use wc.
v5: Don't set obj->base.funcs, it will default to drm_gem_shmem_funcs
(Thomas)
v6: vgem also needs an MMU for remapping
v7: I absolutely butchered the rebases over the vgem mmap change and
revert and broke the patch. Actually go back to v6 from before the
vgem mmap changes.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812131412.2487363-4-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 12 Aug 2021 13:14:11 +0000 (15:14 +0200)]
drm/shmem-helpers: Allocate wc pages on x86
intel-gfx-ci realized that something is not quite coherent anymore on
some platforms for our i915+vgem tests, when I tried to switch vgem
over to shmem helpers.
After lots of head-scratching I realized that I've removed calls to
drm_clflush. And we need those. To make this a bit cleaner use the
same page allocation tooling as ttm, which does internally clflush
(and more, as neeeded on any platform instead of just the intel x86
cpus i915 can be combined with).
Unfortunately this doesn't exist on arm, or as a generic feature. For
that I think only the dma-api can get at wc memory reliably, so maybe
we'd need some kind of GFP_WC flag to do this properly.
v2: Add a TODO comment about what should be done to support this in
other places (Thomas)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812131412.2487363-3-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 12 Aug 2021 13:14:10 +0000 (15:14 +0200)]
drm/shmem-helper: Switch to vmf_insert_pfn
We want to stop gup, which isn't the case if we use vmf_insert_page
and VM_MIXEDMAP, because that does not set pte_special.
The motivation here is to stop get_user_pages from working on buffer
object mmaps in general. Quoting some discussion with Thomas:
On Thu, Jul 22, 2021 at 08:22:43PM +0200, Thomas Zimmermann wrote:
> Am 13.07.21 um 22:51 schrieb Daniel Vetter:
> > We want to stop gup, which isn't the case if we use vmf_insert_page
>
> What is gup?
get_user_pages. It pins memory wherever it is, which badly wreaks at least
ttm and could also cause trouble with cma allocations. In both cases
becaue we can't move/reuse these pages anymore.
Now get_user_pages fails when the memory isn't considered "normal", like
with VM_PFNMAP and using vm_insert_pfn. For consistency across all dma-buf
I'm trying (together with Christian König) to roll this out everywhere,
for fewer surprises.
E.g. for 5.14 iirc we merged a patch to do the same for ttm, where it
closes an actual bug (ttm gets really badly confused when there's suddenly
pinned pages where it thought it can move them).
cma allcoations already use VM_PFNMAP (because that's what dma_mmap is
using underneath), as is anything that's using remap_pfn_range. Worst case
we have to revert this patch for shmem helpers if it breaks something, but
I hope that's not the case. On the ttm side we've also had some fallout
that we needed to paper over with clever tricks.
v2: With this shmem gem helpers now definitely need CONFIG_MMU (0day)
v3: add more depends on MMU. For usb drivers this is a bit awkward,
but really it's correct: To be able to provide a contig mapping of
buffers to userspace on !MMU platforms we'd need to use the cma
helpers for these drivers on those platforms. As-is this wont work.
Also not exactly sure why vm_insert_page doesn't go boom, because that
definitely wont fly in practice since the pages are non-contig to
begin with.
v4: Explain the entire motivation a lot more (Thomas)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812131412.2487363-2-daniel.vetter@ffwll.ch
Rob Clark [Wed, 11 Aug 2021 23:52:47 +0000 (16:52 -0700)]
drm/bridge: ti-sn65dsi86: Avoid creating multiple connectors
If we created our own connector because the driver does not support the
NO_CONNECTOR flag, we don't want the downstream bridge to *also* create
a connector. And if this driver did pass the NO_CONNECTOR flag (and we
supported that mode) this would change nothing.
Fixes:
4e5763f03e10 ("drm/bridge: ti-sn65dsi86: Wrap panel with panel-bridge")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811235253.924867-2-robdclark@gmail.com
Lucas De Marchi [Wed, 11 Aug 2021 20:58:18 +0000 (13:58 -0700)]
drm/edid: fix edid field name
Byte 26 in a edid struct is supposed to be "Blue and white
least-significant 2 bits", not "black and white". Rename the field
accordingly. This field is not used anywhere, so just renaming it here
for correctness.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811205818.156100-1-lucas.demarchi@intel.com
David Stevens [Wed, 11 Aug 2021 04:04:01 +0000 (13:04 +0900)]
drm/virtio: set non-cross device blob uuid_state
Blob resources without the cross device flag don't have a uuid to share
with other virtio devices. When exporting such blobs, set uuid_state to
STATE_ERR so that virtgpu_virtio_get_uuid doesn't hang.
Signed-off-by: David Stevens <stevensd@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210811040401.1264234-1-stevensd@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pavel Skripkin [Wed, 11 Aug 2021 17:50:52 +0000 (20:50 +0300)]
udmabuf: fix general protection fault in udmabuf_create
Syzbot reported general protection fault in udmabuf_create. The problem
was in wrong error handling.
In commit
16c243e99d33 ("udmabuf: Add support for mapping hugepages (v4)")
shmem_read_mapping_page() call was replaced with find_get_page_flags(),
but find_get_page_flags() returns NULL on failure instead PTR_ERR().
Wrong error checking was causing GPF in get_page(), since passed page
was equal to NULL. Fix it by changing if (IS_ER(!hpage)) to if (!hpage)
Reported-by: syzbot+e9cd3122a37c5d6c51e8@syzkaller.appspotmail.com
Fixes:
16c243e99d33 ("udmabuf: Add support for mapping hugepages (v4)")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210811175052.21254-1-paskripkin@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Paul Cercueil [Sun, 8 Aug 2021 13:45:21 +0000 (15:45 +0200)]
drm/ingenic: Use standard drm_atomic_helper_commit_tail
By making the CRTC's .vblank_enable() function return an error when it
is known that the hardware won't deliver a VBLANK, we can drop the
ingenic_drm_atomic_helper_commit_tail() function and use the standard
drm_atomic_helper_commit_tail() function instead.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-4-paul@crapouillou.net
Paul Cercueil [Sun, 8 Aug 2021 13:45:19 +0000 (15:45 +0200)]
drm/ingenic: Remove dead code
The priv->ipu_plane would get a different value further down the code,
without the first assigned value being read first; so the first
assignation can be dropped.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-2-paul@crapouillou.net
Thomas Zimmermann [Fri, 25 Jun 2021 13:50:33 +0000 (15:50 +0200)]
drm: IRQ midlayer is now legacy
Hide the DRM midlayer behind CONFIG_DRM_LEGACY, make functions use
the prefix drm_legacy_, and move declarations to drm_legacy.h.
In struct drm_device, move the fields irq and irq_enabled behind
CONFIG_DRM_LEGACY.
All callers have been updated.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-15-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:07:03 +0000 (11:07 +0200)]
drm: Remove unused devm_drm_irq_install()
DRM IRQ helpers will become legacy. The function devm_drm_irq_install()
is unused and won't be required later.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-14-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:07:02 +0000 (11:07 +0200)]
drm/vc4: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-13-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:07:01 +0000 (11:07 +0200)]
drm/tilcdc: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.
For most drivers, only the DRM IRQ helpers use irq_enabled from
struct drm_device. Tilcdc also uses irq_enabled to make its error
rollback work correctly. As the field will become legacy, duplicated
the state in the driver's local private structure.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-12-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:07:00 +0000 (11:07 +0200)]
drm/tidss: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-11-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:06:59 +0000 (11:06 +0200)]
drm/radeon: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-10-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:06:58 +0000 (11:06 +0200)]
drm/mxsfb: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-9-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:06:57 +0000 (11:06 +0200)]
drm/msm: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Acked-by: Rob Clark <robdclark@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-8-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:06:56 +0000 (11:06 +0200)]
drm/kmb: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-7-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:06:55 +0000 (11:06 +0200)]
drm/gma500: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-6-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:06:54 +0000 (11:06 +0200)]
drm/fsl-dcu: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-5-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:06:53 +0000 (11:06 +0200)]
drm/atmel-hlcdc: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.
v2:
* use managed release via devm_request_irq() (Sam)
* drop extra test for irq != IRQ_NOTCONNECTED (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Dan Sneddon <Dan.Sneddon@microchip.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-4-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:06:52 +0000 (11:06 +0200)]
drm/arm/hdlcd: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.
v2:
* name struct drm_device variables 'drm' (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-3-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 09:06:51 +0000 (11:06 +0200)]
drm/amdgpu: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
The interrupt number returned by pci_msi_vector() is now stored
in struct amdgpu_irq. Calls to pci_msi_vector() can fail and return
a negative errno code. Abort initlaizaton in thi case. The DRM IRQ
midlayer does not handle this correctly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-2-tzimmermann@suse.de
Gal Pressman [Mon, 9 Aug 2021 12:22:46 +0000 (15:22 +0300)]
dma-buf: Fix a few typos in dma-buf documentation
Fix a few typos in the documentation:
- Remove an extraneous 'or'
- 'unpins' -> 'unpin'
- 'braket' -> 'bracket'
- 'mappinsg' -> 'mappings'
- 'fullfills' -> 'fulfills'
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210809122247.15869-1-galpress@amazon.com
Cai Huoqing [Mon, 2 Aug 2021 03:35:52 +0000 (11:35 +0800)]
drm/vmwgfx: Replace "vmw_num_pages" with "PFN_UP"
we counld use PFN_UP instead of vmw_num_pages()
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802033552.990-1-caihuoqing@baidu.com
Cai Huoqing [Mon, 2 Aug 2021 03:33:08 +0000 (11:33 +0800)]
drm/vmwgfx: Make use of PFN_ALIGN/PFN_UP helper macro
it's a refactor to make use of PFN_ALIGN/PFN_UP helper macro
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802033308.927-1-caihuoqing@baidu.com
Desmond Cheong Zhi Xi [Sat, 24 Jul 2021 11:18:24 +0000 (19:18 +0800)]
drm/vmwgfx: fix potential UAF in vmwgfx_surface.c
drm_file.master should be protected by either drm_device.master_mutex
or drm_file.master_lookup_lock when being dereferenced. However,
drm_master_get is called on unprotected file_priv->master pointers in
vmw_surface_define_ioctl and vmw_gb_surface_define_internal.
This is fixed by replacing drm_master_get with drm_file_get_master.
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210724111824.59266-4-desmondcheongzx@gmail.com
Baokun Li [Wed, 9 Jun 2021 07:22:48 +0000 (15:22 +0800)]
drm/vmwgfx: Use list_move_tail instead of list_del/list_add_tail in vmwgfx_cmdbuf_res.c
Using list_move_tail() instead of list_del() + list_add_tail() in vmwgfx_cmdbuf_res.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609072248.1353421-1-libaokun1@huawei.com
Baokun Li [Wed, 9 Jun 2021 07:18:03 +0000 (15:18 +0800)]
drm/vmwgfx: Use list_move_tail instead of list_del/list_add_tail in vmwgfx_cmdbuf.c
Using list_move_tail() instead of list_del() + list_add_tail() in vmwgfx_cmdbuf.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609071803.1347254-1-libaokun1@huawei.com
Shaokun Zhang [Tue, 25 May 2021 08:09:30 +0000 (16:09 +0800)]
drm/vmwgfx: Remove the repeated declaration
Function 'vmw_context_binding_list' is declared twice, remove the
repeated declaration.
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1621930170-54923-1-git-send-email-zhangshaokun@hisilicon.com
Thomas Zimmermann [Tue, 3 Aug 2021 12:59:28 +0000 (14:59 +0200)]
drm/vkms: Use offset-adjusted shadow-plane mappings and output
For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
vkms.
Also provide use the offset-adjusted data address for the writeback
job's output buffers. Output framebuffers with non-zero offsets now
have their content written to the correct location.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-12-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 12:59:27 +0000 (14:59 +0200)]
drm/vbox: Use offset-adjusted shadow-plane mappings
For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
vbox.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-11-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 12:59:26 +0000 (14:59 +0200)]
drm/udl: Use offset-adjusted shadow-plane mapping
For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
udl.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-10-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 12:59:25 +0000 (14:59 +0200)]
drm/simpledrm: Use offset-adjusted shadow-plane mapping
For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
simpledrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-9-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 12:59:24 +0000 (14:59 +0200)]
drm/gm12u320: Use offset-adjusted shadow-plane mappings
For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
gm12u320.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-8-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 12:59:23 +0000 (14:59 +0200)]
drm/cirrus: Use offset-adjusted shadow-plane mappings
For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
cirrus.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-7-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 12:59:22 +0000 (14:59 +0200)]
drm/mgag200: Use offset-adjusted shadow-plane mappings
For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
mgag200.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-6-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 12:59:21 +0000 (14:59 +0200)]
drm/hyperv: Use offset-adjusted shadow-plane mappings
For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
hyperv.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-5-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 12:59:20 +0000 (14:59 +0200)]
drm/gud: Get offset-adjusted mapping from drm_gem_fb_vmap()
Pass the data parameter to drm_gem_fb_vmap() to retrieve pointers
to the data. This address is different from the mapping addresses
for framebuffers with non-zero offsets. Replaces gud's internal
computation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-4-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 12:59:19 +0000 (14:59 +0200)]
drm/ast: Use offset-adjusted shadow-plane mappings
For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
ast.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-3-tzimmermann@suse.de
Thomas Zimmermann [Tue, 3 Aug 2021 12:59:18 +0000 (14:59 +0200)]
drm/gem: Provide offset-adjusted framebuffer BO mappings
Add an additional argument to drm_gem_fb_vmap() to return each BO's
mapping adjusted by the respective offset. Update all callers.
The newly returned values point to the first byite of the data stored
in the framebuffer BOs. Drivers that access the BO data should use it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-2-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:40 +0000 (16:22 +0200)]
drm/mgag200: Compute PLL values during atomic check
PLL setup can fail if the display mode's clock is not supported by
any PLL configuration. Compute the PLL values during atomic check, so
that atomic commits can fail at the appropriate time. If successful,
use the values in the atomic-update phase.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-14-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:39 +0000 (16:22 +0200)]
drm/mgag200: Introduce custom CRTC state
Inherit from struct drm_crtc_state by embeding it and providing the
rsp callbacks for simple-kms helpers. No functional changes.
The new state struct mgag200_crtc_state will hold PLL values for modeset
operations.
v2:
* move the simple-kms changes into a separate patch (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-13-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:38 +0000 (16:22 +0200)]
drm/simple-kms: Support custom CRTC state
Simple KMS helpers already support custom state for planes. Extend the
helpers to support custom CRTC state as well. Drivers can set the reset,
duplicate and destroy callbacks for the display pipeline's CRTC state
and inherit from struct drm_crtc_state by embedding an instance.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-12-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:37 +0000 (16:22 +0200)]
drm/mgag200: Abstract pixel PLL via struct mgag200_pll
Move all PLL compute and update functions into mgag200_pll.c. No
functional changes to the rsp algorithms.
Introduce struct mgag200_pll and mgag200_pll_funcs. The data strutures
abstract the details of each revision's PLL. Perform calls to compute
and update functionality via function pointers. Init the PLL once as
part of the driver initialization.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-11-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:36 +0000 (16:22 +0200)]
drm/mgag200: Declare PLL clock constants static const
Move the PLL constants to the RO data section by declaring them as
static const. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-10-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:35 +0000 (16:22 +0200)]
drm/mgag200: Split PLL compute function for G200SE by rev
The compute function for G200SE pixel PLLs handles two revisions with
different algorithms. Split it accordingly to make it readable. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-9-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:34 +0000 (16:22 +0200)]
drm/mgag200: Split PLL compute functions by device type
Several PLL functions compute values for different device types. Split
them up to make the code more readable. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-8-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:33 +0000 (16:22 +0200)]
drm/mgag200: Store values (not bits) in struct mgag200_pll_values
The fields in struct mgag200_pll_values currently hold the bits of
each register. Store the PLL values instead and let the PLL-update
code figure out the bits for each register.
Until now, the compute function either stored plain values or register
bits in struct mgag200_pll_values. The rsp update function used the
values as-is. This made it very hard to correctly interpret the stored
values (e.g., for logging or debugging). With the cleanup, the stored
values now have a clear meaning.
v2:
* add a bit more context in the commit message (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-7-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:32 +0000 (16:22 +0200)]
drm/mgag200: Introduce separate variable for PLL S parameter
The S parameter is controls the loop filter bandwidth when programming
the PLL. It's currently stored as part of P (i.e., the clock divider.)
Add a separate variable for S prepares the PLL code for further
refactoring. The value of s is currently 0, so it has not yet an effect
on the programming.
v2:
* add a note on the current value of s to commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-6-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:31 +0000 (16:22 +0200)]
drm/mgag200: Split PLL setup into compute and update functions
The _set_plls() functions compute a pixel clock's PLL values
and program the hardware accordingly. This happens during atomic
commits.
For atomic modesetting, it's better to separate computation and
programming from each other. This will allow to compute the PLL
value during atomic checks and catch unsupported modes early.
Split the PLL setup into a compute and an update functions, and
call them one after the other. Computed PLL values are store in
struct mgag200_pll_values. There are four parameters for the PLL,
m, n, p and s. Every compute function stores a value for each
of these parameters, and the rsp update function makes the register
bits from them. The values stored by the compute function are
either plain values or register bits. An additional change is
required to always store plain values.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-5-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:30 +0000 (16:22 +0200)]
drm/mgag200: Remove P_ARRAY_SIZE
Replace P_ARRAY_SIZE by array pre-initializing and ARRAY_SIZE(). No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-4-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:29 +0000 (16:22 +0200)]
drm/mgag200: Return errno codes from PLL compute functions
Return -EINVAL if there's no PLL configuration for the given pixel
clock. The returned errors are currently ignored by the caller, but
the errno codes will become useful when the compute functions run
during atomic checks.
v2:
* give a rational for this change (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-3-tzimmermann@suse.de
Thomas Zimmermann [Wed, 14 Jul 2021 14:22:28 +0000 (16:22 +0200)]
drm/mgag200: Select clock in PLL update functions
Put the clock-selection code into each of the PLL-update functions to
make them select the correct pixel clock. Instead of copying the code,
introduce a new helper WREG_MISC_MASKED, which does masked writes into
<MISC>. Use it from each individual PLL update function.
The pixel clock for video output was not actually set before programming
the clock's values. It worked because the device had the correct clock
pre-set.
v2:
* don't duplicate <MISC> update code (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes:
db05f8d3dc87 ("drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.9+
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-2-tzimmermann@suse.de
Xin Ji [Fri, 6 Aug 2021 10:44:07 +0000 (18:44 +0800)]
drm/bridge: anx7625: Tune K value for IVO panel
IVO panel require less input video clock variation than video clock
variation in DP CTS spec.
This patch decreases the K value of ANX7625 which will shrink eDP Tx
video clock variation to meet IVO panel's requirement.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806104407.2208538-1-xji@analogixsemi.com
Robert Foss [Thu, 5 Aug 2021 18:50:39 +0000 (20:50 +0200)]
drm: bridge: it66121: Check drm_bridge_attach retval
The return value of drm_bridge_attach() is ignored during
the it66121_bridge_attach() call, which is incorrect.
Fixes:
988156dc2fc9 ("drm: bridge: add it66121 driver")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805185039.402178-1-robert.foss@linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805185039.402178-1-robert.foss@linaro.org
Søren Andersen [Thu, 5 Aug 2021 11:19:44 +0000 (13:19 +0200)]
drm/panel: simple: add LOGIC Technologies LTTD800480070-L6WH-RT
Add support for the LOGIC Technologies, Inc LTTD800480070-L6WH-RT
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Co-developed-by: Søren Andersen <san@skov.dk>
Signed-off-by: Søren Andersen <san@skov.dk>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805111944.13533-3-o.rempel@pengutronix.de
Sam Ravnborg [Thu, 5 Aug 2021 11:19:43 +0000 (13:19 +0200)]
drm/panel: simple: add Multi-Innotechnology MI1010AIT-1CP1
The Multi Innotechnology is a 10.1" 1280x800 panel.
The datasheet did not specify specific values for sync, back, front porch.
The values are a best guess based on values for similar panels.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Co-developed-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805111944.13533-2-o.rempel@pengutronix.de
Randy Dunlap [Wed, 14 Jul 2021 17:15:23 +0000 (10:15 -0700)]
drm: nouveau: fix disp.c build when NOUVEAU_BACKLIGHT is not enabled
Fix build errors and warnings when CONFIG_DRM_NOUVEAU_BACKLIGHT is not set
../drivers/gpu/drm/nouveau/dispnv50/disp.c: In function ‘nv50_sor_atomic_disable’:
../drivers/gpu/drm/nouveau/dispnv50/disp.c:1665:52: error: ‘struct nouveau_connector’ has no member named ‘backlight’
struct nouveau_backlight *backlight = nv_connector->backlight;
^~
../drivers/gpu/drm/nouveau/dispnv50/disp.c:1670:28: error: dereferencing pointer to incomplete type ‘struct nouveau_backlight’
if (backlight && backlight->uses_dpcd) {
and then fix subsequent build warnings after the above are fixed:
../drivers/gpu/drm/nouveau/dispnv50/disp.c: In function ‘nv50_sor_atomic_disable’:
../drivers/gpu/drm/nouveau/dispnv50/disp.c:1669:6: warning: unused variable ‘ret’ [-Wunused-variable]
int ret;
^~~
../drivers/gpu/drm/nouveau/dispnv50/disp.c:1662:22: warning: unused variable ‘drm’ [-Wunused-variable]
struct nouveau_drm *drm = nouveau_drm(nv_encoder->base.base.dev);
^~~
Fixes:
6eca310e8924 ("drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714171523.413-1-rdunlap@infradead.org
Desmond Cheong Zhi Xi [Mon, 2 Aug 2021 10:59:57 +0000 (18:59 +0800)]
drm: add lockdep assert to drm_is_current_master_locked
In drm_is_current_master_locked, accessing drm_file.master should be
protected by either drm_file.master_lookup_lock or
drm_device.master_mutex. This was previously awkward to assert with
lockdep.
Following patch ("locking/lockdep: Provide lockdep_assert{,_once}()
helpers"), this assertion is now convenient. So we add in the
assertion and explain this lock design in the kerneldoc.
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802105957.77692-3-desmondcheongzx@gmail.com
Peter Zijlstra [Mon, 2 Aug 2021 10:59:56 +0000 (18:59 +0800)]
locking/lockdep: Provide lockdep_assert{,_once}() helpers
Extract lockdep_assert{,_once}() helpers to more easily write composite
assertions like, for example:
lockdep_assert(lockdep_is_held(&drm_device.master_mutex) ||
lockdep_is_held(&drm_file.master_lookup_lock));
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802105957.77692-2-desmondcheongzx@gmail.com
Dillon Min [Sat, 24 Jul 2021 03:44:03 +0000 (11:44 +0800)]
drm/panel: Add ilitek ili9341 panel driver
This driver combines tiny/ili9341.c mipi_dbi_interface driver
with mipi_dpi_interface driver, can support ili9341 with serial
mode and parallel rgb interface mode by different dts bindings.
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627098243-2742-4-git-send-email-dillon.minfei@gmail.com
Dillon Min [Sat, 24 Jul 2021 03:44:01 +0000 (11:44 +0800)]
dt-bindings: display: panel: Add ilitek ili9341 panel bindings
Add documentation for "ilitek,ili9341" panel.
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/lkml/1626853288-31223-2-git-send-email-dillon.minfei@gmail.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627098243-2742-2-git-send-email-dillon.minfei@gmail.com
Artjom Vejsel [Wed, 4 Aug 2021 00:23:53 +0000 (03:23 +0300)]
drm/panel-simple: add Gopher 2b LCD panel
The Gopher 2b LCD panel is used in Gopher 2b handhelds.
It's simple panel with NewVision NV3047 driver, but SPI lines are not
connected. It has no specific name, since it's unique to that handheld.
lot name at AliExpress: 4.3 inch 40PIN TFT LCD Screen COG NV3047 Drive
IC 480(RGB)*272 No Touch 24Bit RGB Interface
Signed-off-by: Artjom Vejsel <akawolf0@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210804002353.76385-4-akawolf0@gmail.com
Artjom Vejsel [Wed, 4 Aug 2021 00:23:52 +0000 (03:23 +0300)]
dt-bindings: Add DT bindings for QiShenglong Gopher 2b panel
Add DT bindings for QiShenglong Gopher 2b 4.3" 480(RGB)x272 TFT LCD
panel.
Signed-off-by: Artjom Vejsel <akawolf0@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210804002353.76385-3-akawolf0@gmail.com
Thomas Zimmermann [Fri, 30 Jul 2021 18:35:11 +0000 (20:35 +0200)]
drm/vkms: Map output framebuffer BOs with drm_gem_fb_vmap()
Abstract the framebuffer details by mappings its BOs with a call
to drm_gem_fb_vmap(). Unmap with drm_gem_fb_vunamp().
Before, the output address with stored as raw pointer in the priv
field of struct drm_writeback_job. Introduce the new type
struct vkms_writeback_job, which holds the output mappings addresses
while the writeback job is active.
The patchset also cleans up some internal casting an setup of the
output addresses. No functional changes.
v3:
* free instances of struct vkms_writeback_job on cleanup
or errors
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-6-tzimmermann@suse.de
Thomas Zimmermann [Fri, 30 Jul 2021 18:35:10 +0000 (20:35 +0200)]
drm/gud: Map framebuffer BOs with drm_gem_fb_vmap()
Abstract the framebuffer details by mapping its BOs with a call
to drm_gem_fb_vmap(). Unmap with drm_gem_fb_vunmap().
The call to drm_gem_fb_vmap() ensures that all BOs are mapped
correctly. Gud still only supports single-plane formats.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-5-tzimmermann@suse.de
Thomas Zimmermann [Fri, 30 Jul 2021 18:35:09 +0000 (20:35 +0200)]
drm/gem: Clear mapping addresses for unused framebuffer planes
Set the returned mapping address to NULL if a framebuffer plane does
not have a BO associated with it. Likewise, ignore mappings of NULL
during framebuffer unmap operations. Allows users of the functions to
perform unmap operations of certain BOs by themselfes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-4-tzimmermann@suse.de
Thomas Zimmermann [Fri, 30 Jul 2021 18:35:08 +0000 (20:35 +0200)]
drm/gem: Provide drm_gem_fb_{vmap,vunmap}()
Move framebuffer vmap code from shadow-buffered plane state into the new
interfaces drm_gem_fb_vmap() and drm_gem_fb_vunmap(). These functions
provide mappings of a framebuffer's BOs into kernel address space. No
functional changes.
v4:
* remove duplicated blank line
v2:
* using [static N] for array parameters enables compile-time checks
* include <drm/drm_fourcc.h> for DRM_FORMAT_MAX_PLANES (kernel
test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-3-tzimmermann@suse.de
Thomas Zimmermann [Fri, 30 Jul 2021 18:35:07 +0000 (20:35 +0200)]
drm: Define DRM_FORMAT_MAX_PLANES
DRM uses a magic number of 4 for the maximum number of planes per color
format. Declare this constant via DRM_FORMAT_MAX_PLANES and update the
related code. Some code depends on the length of arrays that are now
declared with DRM_FORMAT_MAX_PLANES. Convert it from '4' to ARRAY_SIZE.
v2:
* mention usage of ARRAY_SIZE() in the commit message (Maxime)
* also fix error handling in drm_gem_fb_init_with_funcs()
(kernel test robot)
* include <drm/drm_fourcc.h> for DRM_FORMAT_MAX_PLANES
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-2-tzimmermann@suse.de
Simon Ser [Mon, 2 Aug 2021 07:28:35 +0000 (07:28 +0000)]
drm: document drm_mode_get_property
It's not obvious what the fields mean and how they should be used.
The most important detail is the link to drm_property.flags, which
describes how property types work.
v2: document enum drm_mode_property_enum, add ref to "Modeset Base
Object Abstraction" (Daniel)
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802072826.500078-1-contact@emersion.fr
Daniel Vetter [Fri, 30 Jul 2021 09:52:51 +0000 (11:52 +0200)]
drm: Fix oops in damage self-tests by mocking damage property
I've added a new check to make sure that drivers which insepct the
damage property have it set up correctly, but somehow missed that this
borke the damage selftest in the CI result noise.
Fix it up by mocking enough of drm_device and drm_plane so we can call
drm_plane_enable_fb_damage_clips() to make the new check happy.
Since there's a lot of duplicated mock code already copy-pasted into
each test I've also refactored this a bit to trim it down.
v2: Squash in fixup from 0day for
drivers/gpu/drm/selftests/test-drm_damage_helper.c:15:19: warning: symbol 'mock_device' was not declared. Should it be static?
drivers/gpu/drm/selftests/test-drm_damage_helper.c:16:30: warning: symbol 'mock_obj_props' was not declared. Should it be static?
drivers/gpu/drm/selftests/test-drm_damage_helper.c:17:18: warning: symbol 'mock_plane' was not declared. Should it be static?
drivers/gpu/drm/selftests/test-drm_damage_helper.c:18:21: warning: symbol 'mock_prop' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes:
c7fcbf251397 ("drm/plane: check that fb_damage is set up when used")
Cc: José Roberto de Souza <jose.souza@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730095251.4343-1-daniel.vetter@ffwll.ch
Link: https://patchwork.freedesktop.org/patch/msgid/20210730141948.GA11955@243d74413310
Cai Huoqing [Fri, 30 Jul 2021 13:27:29 +0000 (21:27 +0800)]
drm: Fix typo in comments
fix typo for drm
v1->v2:
respin with the change "iff ==> implies that"
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730132729.376-1-caihuoqing@baidu.com
Simon Ser [Wed, 9 Jun 2021 21:24:10 +0000 (21:24 +0000)]
drm/connector: add ref to drm_connector_get in iter docs
Mention that connectors need to be referenced manually if they are
to be accessed after the iteration has progressed or ended.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/KRoUI7OC9lRIvk3YzdGm6tcMVAVlG1fR78Ll7kTZZT4@cp3-web-051.plabs.ch
Gregory Williams [Sat, 31 Jul 2021 00:53:28 +0000 (20:53 -0400)]
DRM: ast: Fixed coding style issues of ast_mode.c
Removed space before comma, fixed if statements by putting trailing
statements on new line, fixed unsigned int declaration, and removed
not needed else statement after return.
Signed-off-by: Gregory Williams <gregwills85@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210731005328.GA19016@devbox
Alistair Francis [Sun, 1 Aug 2021 00:47:00 +0000 (10:47 +1000)]
drm/panel: Add support for E Ink VB3300-KCA
Add support for the 10.3" E Ink panel described at:
https://www.eink.com/product.html?type=productdetail&id=7
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210801004701.831-1-alistair@alistair23.me
Cai Huoqing [Tue, 27 Jul 2021 05:21:07 +0000 (13:21 +0800)]
drm/pl111: Remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727052107.659-1-caihuoqing@baidu.com
Douglas Anderson [Fri, 30 Jul 2021 15:46:05 +0000 (08:46 -0700)]
drm/panel: atna33xc20: Introduce the Samsung ATNA33XC20 panel
The Samsung ATNA33XC20 panel is an AMOLED eDP panel that has backlight
control over the DP AUX channel.
This panel is _almost_ able to be controlled in a "simple" way (and it
originally was implemented in panel-simple.c), but it's really
impossible to get the backlight semantics right there without adding
wacky special-case code to panel-simple. Let's give up and clone the
parts of panel-simple that we need and implement the power sequence
that this panel needs.
NOTE: we'll still leave the devicetree bindings alone. Even though the
power-sequencing is non-standard the bindings are still "simple".
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.6.I3a2900080f8749d2bb4baf49ca902db4b0e1df7d@changeid
Douglas Anderson [Fri, 30 Jul 2021 15:46:04 +0000 (08:46 -0700)]
Revert "drm/panel-simple: Support for delays between GPIO & regulator"
This reverts commit
18a1488bf1e13fc3fc96d7948466b2166067c6c8.
Those delays were added to support the Samsung ATNA33XC20
panel. However, we've moving that to its own panel driver and out of
panel-simple. That means we don't need the ability to specify this
delay.
NOTE: it's unlikely we want to keep this delay "just in case" some
other panel needs it. The enable-gpio and the power supply are really
supposed to be different ways to specify the same thing: the main
enable of the panel. Supporting a delay between them doesn't really
make sense.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.5.Ie44e3e5b7a926392541d575ca84c56931596513f@changeid
Douglas Anderson [Fri, 30 Jul 2021 15:46:03 +0000 (08:46 -0700)]
Revert "drm/panel-simple: Add Samsung ATNA33XC20"
This reverts commit
4bfe6c8f7c23b01719671b69fd29b87a35ccd9d6.
This panel's power sequencing really can't be handled properly by
panel-simple because of the special sequencing needed for the EL_ON3
GPIO. The only way it was sorta working in the past was by trying to
jam that signal into the "enable-gpio", but that really wasn't a good
fit. We'll add a custom panel driver for this panel to do it right.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.4.Id9f076ec5f35633f8ce931051af268a04c45c075@changeid
Douglas Anderson [Fri, 30 Jul 2021 15:46:02 +0000 (08:46 -0700)]
drm/bridge: ti-sn65dsi86: Add some 100 us delays
The manual has always said that we need 100 us delays in a few
places. Though it hasn't seemed to be a big deal to skip these, let's
add them in case it makes something happier.
NOTE: this fixes no known issues but it seems good to make it right.
Fixes:
a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.3.I842d483139531aa4651da8338512fdf0171ff23c@changeid
Douglas Anderson [Fri, 30 Jul 2021 15:46:01 +0000 (08:46 -0700)]
drm/bridge: ti-sn65dsi86: Fix power off sequence
When testing with a panel that's apparently a little more persnickety
about the correct power sequence (specifically Samsung ATNA33XC20), we
found that the ti-sn65dsi86 was doing things just slightly wrong.
Looking closely at the ti-sn65dsi86's datasheet, the power off
sequence is supposed to be:
1. Clear VSTREAM_ENABLE bit
2. Stop DSI stream from GPU. DSI lanes must be placed in LP11 state.
3. Program the ML_TX_MODE to 0x0 (OFF)
4. Program the DP_NUM_LANES register to 0x0
5. Clear the DP_PLL_EN bit.
6. Deassert the EN pin.
7. Remove power from supply pins
Since we were doing the whole sequence in the "disable", I believe
that step #2 (stopping the DSI stream from the GPU) wasn't
happening. We also weren't setting DP_NUM_LANES to 0.
Let's fix this.
NOTE: things are a little asymmetric now. For instance, we turn the
PLL on in "enable" but now we're not turning it off until
"post_disable". It would seem to make sense to move the PLL turning on
to "pre_enable" to match. Unfortunately, I don't believe that's
allowed. It looks as if (in the non-refclk mode which probably nobody
is using) we have to wait until the MIPI clock is there before we can
enable the PLL. In any case, the way it is here won't really
hurt--it'll just leave the PLL on a little longer.
Fixes:
a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.2.If8a8ec3bf1855cf0dbb62c005a71d6698c99c125@changeid
Douglas Anderson [Fri, 30 Jul 2021 15:46:00 +0000 (08:46 -0700)]
drm/dp: Don't zero PWMGEN_BIT_COUNT when driver_pwm_freq_hz not specified
The function drm_edp_backlight_init() is defined such that the
"driver_pwm_freq_hz" parameter is optional--it's 0 if you don't want
to futz with it. If you follow this variable through, you'll find out
that if it's 0 we won't ever set the "bl->pwmgen_bit_count", leaving
it as 0.
That means that before using it in drm_edp_backlight_enable() we need
to check to see if it's non-zero.
Programming this field to zero was confusing the panel I tested with
(Samsung ATNA33XC20). The backlight still worked somewhat but the
brightness values didn't correspond to what they should have been.
Fixes:
867cf9cd73c3 ("drm/dp: Extract i915's eDP backlight code into DRM helpers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.1.If017efce7116ae8ba015ed7def840c390a0e0c77@changeid
Desmond Cheong Zhi Xi [Fri, 30 Jul 2021 05:17:59 +0000 (13:17 +0800)]
drm: clean up unused kerneldoc in drm_lease.c
The kerneldoc in drm_lease.c is unused because none of the functions
are driver interfaces as the symbols are not exported.
Since they aren't used and much of the existing comments don't provide
any insights (e.g. they just repeat the function name or list out the
function parameters), they should be removed to make them easier to
maintain and to make useful info more obvious.
As a note, many of the comments mention whether idr_mutex should be
held, but these are mostly redundant in cases where the function
contains lockdep assertions or grabs the mutex.
To simplify review, here's the reasoning behind each update.
drm_lease_owner:
function name is self-descriptive
_drm_find_lessee:
function name is self-descriptive
_drm_lease_held_master:
function name and signature are self-descriptive
_drm_has_leased:
kerneldoc is summarized into a comment because the function name could
be interpreted ambiguously (check if the object has been leased VS
check if the master has a lease on the object)
_drm_lease_held:
Retain the idr_mutex comment because the function does not directly
grab the mutex or use a lockdep assertion.
Otherwise, the function name is self-descriptive.
drm_lease_held:
function name is self-descriptive
drm_lease_filter_crtcs:
Kerneldoc is summarized into a comment because the function name could
be interpreted ambiguously (filter leases based on crtcs mask VS
filter crtcs mask based on leases)
drm_lease_create:
Kerneldoc removed.
Useful function details such as atomic leasing are retained.
Errno interpretations are useful and retained.
drm_lease_destroy:
function name is self-descriptive. Additional information is also
removed as they're already present as comments inside the function.
_drm_lease_revoke:
function name is self-descriptive
drm_lease_revoke:
function name is self-descriptive
drm_mode_create_lease_ioctl:
Kerneldoc removed, but useful function details retained.
drm_mode_list_lessees_ioctl:
function name is self-descriptive. Additional details restate what the
code does.
drm_mode_get_lease_ioctl:
Function summary retained to clarify that it's the leased objects that
are returned, not the lease structure.
drm_mode_revoke_lease_ioctl:
Kerneldoc removed, but useful function details retained.
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730051759.1570630-1-desmondcheongzx@gmail.com
Dave Airlie [Fri, 30 Jul 2021 06:48:35 +0000 (16:48 +1000)]
Merge tag 'amd-drm-next-5.15-2021-07-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.15-2021-07-29:
amdgpu:
- VCN/JPEG power down sequencing fixes
- Various navi pcie link handling fixes
- Clockgating fixes
- Yellow Carp fixes
- Beige Goby fixes
- Misc code cleanups
- S0ix fixes
- SMU i2c bus rework
- EEPROM handling rework
- PSP ucode handling cleanup
- SMU error handling rework
- AMD HDMI freesync fixes
- USB PD firmware update rework
- MMIO based vram access rework
- Misc display fixes
- Backlight fixes
- Add initial Cyan Skillfish support
- Overclocking fixes suspend/resume
amdkfd:
- Sysfs leak fix
- Add counters for vm faults and migration
- GPUVM TLB optimizations
radeon:
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730033455.3852-1-alexander.deucher@amd.com
Dave Airlie [Fri, 30 Jul 2021 06:05:58 +0000 (16:05 +1000)]
Merge tag 'drm-msm-next-2021-07-28' of https://gitlab.freedesktop.org/drm/msm into drm-next
An early pull for v5.15 (there'll be more coming in a week or two),
consisting of the drm/scheduler conversion and a couple other small
series that one was based one. Mostly sending this now because IIUC
danvet wanted it in drm-next so he could rebase on it. (Daniel, if
you disagree then speak up, and I'll instead include this in the main
pull request once that is ready.)
This also has a core patch to drop drm_gem_object_put_locked() now
that the last use of it is removed.
[airlied: add NULL to drm_sched_init]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGumRk7H88bqV=H9Fb1SM0zPBo5B7NsCU3jFFKBYxf5k+Q@mail.gmail.com
Dave Airlie [Fri, 30 Jul 2021 04:51:22 +0000 (14:51 +1000)]
Merge tag 'drm-misc-next-2021-07-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
- Add modifiers for arm fixed rate compression.
Cross-subsystem Changes:
- Assorted dt binding fixes.
- Convert ssd1307fb to json-schema.
- Update a lot of irc channels to point to OFTC, as everyone moved there.
- Fix the same divide by zero for asilantfb, kyro, rivafb.
Core Changes:
- Document requirements for new atomic properties.
- Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers.
- Document drm_property_enum.value for bitfields.
- Add explicit _NO_ for MIPI_DSI flags that disable features.
- Assorted documentation fixes.
- Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core.
- Add logging and docs to RMFB ioctl.
- Assorted small fixes to dp_mst, master handling.
- Clarify drm lease usage.
Driver Changes:
- Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4.
- More drm -> linux irq conversions.
- Add support for some Logic Technologies and Multi-Inno panels.
- Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem.
- Add support for 2 AUO panels.
- Add damage handling to ssd1307fb.
- Improve FIFO handling on mxsfb.
- Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls.
- Improve sony acx424akp backlight handling.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a753221a-e23e-0dc4-7ca6-8c1b179738d0@linux.intel.com
Dave Airlie [Fri, 30 Jul 2021 01:28:11 +0000 (11:28 +1000)]
Merge tag 'du-next-
20210728' of git://linuxtv.org/pinchartl/media into drm-next
- R-Car DU shutdown fixes
- R-Car DU conversion to bridge connector helper
- Misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YQGHjOSOw2G4+A3x@pendragon.ideasonboard.com
Maxime Ripard [Wed, 7 Jul 2021 09:36:32 +0000 (11:36 +0200)]
drm/vc4: hdmi: Remove unused struct
Commit
91e99e113929 ("drm/vc4: hdmi: Register HDMI codec") removed the
references to the vc4_hdmi_audio_component_drv structure, but not the
structure itself resulting in a warning. Remove it.
Fixes:
91e99e113929 ("drm/vc4: hdmi: Register HDMI codec")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-2-maxime@cerno.tech
Maxime Ripard [Wed, 7 Jul 2021 09:36:31 +0000 (11:36 +0200)]
drm/vc4: hdmi: Remove redundant variables
The vc4_hdmi_audio_prepare function and the functions it's calling have
in several occurences multiple dereferences of either the sample rate or
the number of channels.
It turns out that these variables are also passed through the hdmi codec
parameters structure. Convert all the users to use this structure, and
if it's used multiple times use a variable to store it instead of
dereferencing it every time.
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-1-maxime@cerno.tech
Desmond Cheong Zhi Xi [Wed, 28 Jul 2021 10:27:39 +0000 (18:27 +0800)]
drm: clarify usage of drm leases
We make the following changes to the documentation of drm leases to
make it easier to reason about their usage. In particular, we clarify
the lifetime and locking rules of lease fields in drm_master:
1. Make it clear that &drm_device.mode_config.idr_mutex protects the
lease idr and list structures for drm_master. The lessor field itself
doesn't need to be protected as it doesn't change after it's set in
drm_lease_create.
2. Add descriptions for the lifetime of lessors and leases.
3. Add an overview DOC: section in drm-uapi.rst that defines the
terminology for drm leasing, and explains how leases work and why
they're used.
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728102739.441543-1-desmondcheongzx@gmail.com
Luben Tuikov [Wed, 28 Jul 2021 15:07:03 +0000 (11:07 -0400)]
drm/amd/pm: Fix a bug in semaphore double-lock
Fix a bug in smu_cmn_send_msg_without_waiting() in
that this function does not need to take the
smu->message_lock mutex in order to send a message
down to the SMU. The mutex is acquired by the
caller of this function instead.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Changfeng Zhu <Changfeng.Zhu@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Fixes:
5810323ba69289 ("drm/amd/pm: Fix a bug communicating with the SMU (v5)")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 28 Jul 2021 09:00:53 +0000 (17:00 +0800)]
drm/amdgpu: enable psp front door loading by default for cyan_skillfish2
The function is ready on psp firmware, and enable it by default.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>