ia64: fix module loading for gcc-5.4

[ Upstream commit a25fb8508c1b80dce742dbeaa4d75a1e9f2c5617 ]

Starting from gcc-5.4+ gcc generates MLX instructions in more cases to
refer local symbols:

    https://gcc.gnu.org/PR60465

That caused ia64 module loader to choke on such instructions:

    fuse: invalid slot number 1 for IMM64

The Linux kernel used to handle only case where relocation pointed to
slot=2 instruction in the bundle.  That limitation was fixed in linux by
commit 9c184a073bfd ("[IA64] Fix 2.6 kernel for the new ia64 assembler")
See

    http://sources.redhat.com/bugzilla/show_bug.cgi?id=1433

This change lifts the slot=2 restriction from the kernel module loader.

Tested on 'fuse' and 'btrfs' kernel modules.

Cc: Markus Elfring <elfring@users.sourceforge.net>
Cc: H J Lu <hjl.tools@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Bug: https://bugs.gentoo.org/601014
Tested-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / power: Delay turning off unused power resources after suspend

[ Upstream commit 8ece1d83346bcc431090d59a2184276192189cdd ]

Commit 660b1113e0f3 (ACPI / PM: Fix consistency check for power resources
during resume) introduced a check for ACPI power resources which have
been turned on by the BIOS during suspend and turns these back off again.

This is causing problems on a Dell Venue Pro 11 7130 (i5-4300Y) it causes
the following messages to show up in dmesg:

[  131.014605] ACPI: Waking up from system sleep state S3
[  131.150271] acpi LNXPOWER:07: Turning OFF
[  131.150323] acpi LNXPOWER:06: Turning OFF
[  131.150911] acpi LNXPOWER:00: Turning OFF
[  131.169014] ACPI : EC: interrupt unblocked
[  131.181811] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  133.535728] pci_raw_set_power_state: 76 callbacks suppressed
[  133.535735] iwlwifi 0000:01:00.0: Refused to change power state,
               currently in D3
[  133.597672] PM: noirq resume of devices complete after 2428.891 msecs

Followed by a bunch of iwlwifi errors later on and the pcie device
dropping from the bus (acpiphp thinks it has been unplugged).

Disabling the turning off of unused power resources fixes this. Instead
of adding a quirk for this system, this commit fixes this by moving the
disabling of unused power resources to later in the resume sequence
when the iwlwifi card has been moved out of D3 so the ref_count for
its power resource no longer is 0.

This new behavior seems to match the intend of the original commit which
commit-msg says: "(... which means that no devices are going to need them
any time soon) and we should turn them off".

This also avoids power resources which we need when bringing devices out
of D3 from getting bounced off and then back on again.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid10: skip spare disk as 'first' disk

[ Upstream commit b506335e5d2b4ec687dde392a3bdbf7601778f1d ]

Commit 6f287ca(md/raid10: reset the 'first' at the end of loop) ignores
a case in reshape, the first rdev could be a spare disk, which shouldn't
be accounted as the first disk since it doesn't include the offset info.

Fix: 6f287ca(md/raid10: reset the 'first' at the end of loop)
Cc: Guoqing Jiang <gqjiang@suse.com>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/rxe: Don't clamp residual length to mtu

[ Upstream commit d52418502e288b5c7e9e2e6cf1de5f1d3d79d2e1 ]

When reading a RDMA WRITE FIRST packet we copy the DMA length from the RDMA
header into the qp->resp.resid variable for later use. Later in check_rkey()
we clamp it to the MTU if the packet is an  RDMA WRITE packet and has a
residual length bigger than the MTU. Later in write_data_in() we subtract the
payload of the packet from the residual length. If the packet happens to have a
payload of exactly the MTU size we end up with a residual length of 0 despite
the packet not being the last in the conversation. When the next packet in the
conversation arrives, we don't have any residual length left and thus set the QP
into an error state.

This broke NVMe over Fabrics functionality over rdma_rxe.ko

The patch was verified using the following test.

 # echo eth0 > /sys/module/rdma_rxe/parameters/add
 # nvme connect -t rdma -a 192.168.155.101 -s 1023 -n nvmf-test
 # mkfs.xfs -fK /dev/nvme0n1
 meta-data=/dev/nvme0n1           isize=256    agcount=4, agsize=65536 blks
          =                       sectsz=4096  attr=2, projid32bit=1
          =                       crc=0        finobt=0, sparse=0
 data     =                       bsize=4096   blocks=262144, imaxpct=25
          =                       sunit=0      swidth=0 blks
 naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
 log      =internal log           bsize=4096   blocks=2560, version=2
          =                       sectsz=4096  sunit=1 blks, lazy-count=1
 realtime =none                   extsz=4096   blocks=0, rtextents=0
 # mount /dev/nvme0n1 /tmp/
 [  148.923263] XFS (nvme0n1): Mounting V4 Filesystem
 [  148.961196] XFS (nvme0n1): Ending clean mount
 # dd if=/dev/urandom of=test.bin bs=1M count=128
 128+0 records in
 128+0 records out
 134217728 bytes (134 MB, 128 MiB) copied, 0.437991 s, 306 MB/s
 # sha256sum test.bin
 cde42941f045efa8c4f0f157ab6f29741753cdd8d1cff93a6b03649d83c4129a  test.bin
 # cp test.bin /tmp/
 sha256sum /tmp/test.bin
 cde42941f045efa8c4f0f157ab6f29741753cdd8d1cff93a6b03649d83c4129a  /tmp/test.bin

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: twl4030-pwrbutton - use correct device for irq request

[ Upstream commit 3071e9dd6cd3f2290d770117330f2c8b2e9a97e4 ]

The interrupt should be requested for the platform device
and not for the input device.

Fixes: 7f9ce649d267 ("Input: twl4030-pwrbutton - simplify driver using devm_*")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: pda_power: move from timer to delayed_work

[ Upstream commit 633e8799ddc09431be2744c4a1efdbda13af2b0b ]

This changed is needed to avoid locking problem during
boot as shown:

<5>[    8.824096] Registering SWP/SWPB emulation handler
<6>[    8.977294] clock: disabling unused clocks to save power
<3>[    9.108154] BUG: sleeping function called from invalid context at kernel_albert/kernel/mutex.c:269
<3>[    9.122894] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
<4>[    9.130249] 3 locks held by swapper/0/1:
<4>[    9.134613]  #0:  (&__lockdep_no_validate__){......}, at: [<c0342430>] __driver_attach+0x58/0xa8
<4>[    9.144500]  #1:  (&__lockdep_no_validate__){......}, at: [<c0342440>] __driver_attach+0x68/0xa8
<4>[    9.154357]  #2:  (&polling_timer){......}, at: [<c0053770>] run_timer_softirq+0x108/0x3ec
<4>[    9.163726] Backtrace:
<4>[    9.166473] [<c001269c>] (dump_backtrace+0x0/0x114) from [<c067e5f0>] (dump_stack+0x20/0x24)
<4>[    9.175811]  r6:00203230 r5:0000010d r4:d782e000 r3:60000113
<4>[    9.182250] [<c067e5d0>] (dump_stack+0x0/0x24) from [<c007441c>] (__might_sleep+0x10c/0x128)
<4>[    9.191650] [<c0074310>] (__might_sleep+0x0/0x128) from [<c0688f60>] (mutex_lock_nested+0x34/0x36c)
<4>[    9.201660]  r5:c02d5350 r4:d79a0c64
<4>[    9.205688] [<c0688f2c>] (mutex_lock_nested+0x0/0x36c) from [<c02d5350>] (regulator_set_current_limit+0x30/0x118)
<4>[    9.217071] [<c02d5320>] (regulator_set_current_limit+0x0/0x118) from [<c0435ce0>] (update_charger+0x84/0xc4)
<4>[    9.228027]  r7:d782fb20 r6:00000101 r5:c1767e94 r4:00000000
<4>[    9.234436] [<c0435c5c>] (update_charger+0x0/0xc4) from [<c0435d40>] (psy_changed+0x20/0x48)
<4>[    9.243804]  r5:d782e000 r4:c1767e94
<4>[    9.247802] [<c0435d20>] (psy_changed+0x0/0x48) from [<c0435dec>] (polling_timer_func+0x84/0xb8)
<4>[    9.257537]  r4:c1767e94 r3:00000002
<4>[    9.261566] [<c0435d68>] (polling_timer_func+0x0/0xb8) from [<c00537e4>] (run_timer_softirq+0x17c/0x3ec)
<4>[    9.272033]  r4:c1767eb0 r3:00000000
<4>[    9.276062] [<c0053668>] (run_timer_softirq+0x0/0x3ec) from [<c004b000>] (__do_softirq+0xf0/0x298)
<4>[    9.286010] [<c004af10>] (__do_softirq+0x0/0x298) from [<c004b650>] (irq_exit+0x98/0xa0)
<4>[    9.295013] [<c004b5b8>] (irq_exit+0x0/0xa0) from [<c000edbc>] (handle_IRQ+0x60/0xc0)
<4>[    9.303680]  r4:c1194e98 r3:c00bc778
<4>[    9.307708] [<c000ed5c>] (handle_IRQ+0x0/0xc0) from [<c0008504>] (gic_handle_irq+0x34/0x68)
<4>[    9.316955]  r8:000ac383 r7:d782fc3c r6:d782fc08 r5:c11936c4 r4:e0802100
<4>[    9.324310] r3:c026ba48
<4>[    9.327301] [<c00084d0>] (gic_handle_irq+0x0/0x68) from [<c068c2c0>] (__irq_svc+0x40/0x74)
<4>[    9.336456] Exception stack(0xd782fc08 to 0xd782fc50)
<4>[    9.342041] fc00:                   d6e30e6c ac383627 00000000 ac383417 ea19c000 ea200000
<4>[    9.351104] fc20: beffffff 00000667 000ac383 d6e30670 d6e3066c d782fc94 d782fbe8 d782fc50
<4>[    9.360168] fc40: c026ba48 c001d1f0 00000113 ffffffff

Fixes: b2998049cfae ("[BATTERY] pda_power platform driver")
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: isp1704: Fix unchecked return value of devm_kzalloc

[ Upstream commit 8b20839988f1ed5e534b270f3776709b640dc7e0 ]

Function devm_kzalloc() will return a NULL pointer. However, in function
isp1704_charger_probe(), the return value of devm_kzalloc() is directly
used without validation. This may result in a bad memory access bug.

Fixes: 34a109610e2a ("isp1704_charger: Add DT support")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Add disable-reset device-property

[ Upstream commit 6cf62a3b97e78ba41d31390e59a1ddc98a9e3622 ]

Allow platform-code to disable the reset on probe and suspend/resume
by setting a "disable-reset" boolean device property on the device.

There are several reasons why the platform-code may want to disable
the reset on probe and suspend/resume:

1) Resetting the charger should never be necessary it should always have
sane values programmed. If it is running with invalid values while we
are not running (system turned off or suspended) there is a big problem
as that may lead to overcharging the battery.

2) The reset in suspend() is meant to put the charger back into default
mode, but this is not necessary and not a good idea. If the charger has
been programmed with a higher max charge_current / charge_voltage then
putting it back in default-mode will reset those to the safe power-on
defaults, leading to slower charging, or charging to a lower voltage
(and thus not using the full capacity) while suspended which is
undesirable. Reprogramming the max charge_current / charge_voltage
after the reset will not help here as that will put the charger back
in host mode and start the i2c watchdog if the host then does not do
anything for 40s (iow if we're suspended for more then 40s) the watchdog
expires resetting the device to default-mode, including resetting all
the registers to there safe power-on defaults. So the only way to keep
using custom charge settings while suspending is to keep the charger in
its normal running state with the i2c watchdog disabled. This is fine
as the charger will still automatically switch from constant current
to constant voltage and stop charging when the battery is full.

3) Besides never being necessary resetting the charger also causes
problems on systems where the charge voltage limit is set higher then the
reset value, if this is the case and the charger is reset while charging
and the battery voltage is between the 2 voltages, then about half the
time the charger gets confused and claims to be charging (REG08 contains
0x64) but in reality the charger has decoupled itself from VBUS (Q1 off)
and is drawing 0A from VBUS, leaving the system running from the battery.

This last problem is happening on a GPD-win mini PC with a bq24292i
charger chip combined with a max17047 fuel-gauge and a LiHV battery.
I've checked and TI does not list any errata for the bq24292i which
could explain this (there are no errata at all).

Cc: Liam Breck <kernel@networkimprov.net>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Align RX buffers

[ Upstream commit 9b70de6d0266888b3743f03802502e43131043c8 ]

The bnx2x driver is not providing proper alignment on the receive buffers it
passes to build_skb(), causing skb_shared_info to be misaligned.
skb_shared_info contains an atomic, and while PPC normally supports
unaligned accesses, it does not support unaligned atomics.

Aligning the size of rx buffers will ensure that page_frag_alloc() returns
aligned addresses.

This can be reproduced on PPC by setting the network MTU to 1450 (or other
non-multiple-of-4) and then generating sufficient inbound network traffic
(one or two large "wget"s usually does it), producing the following oops:

Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656
Faulting instruction address: 0xc00000000080ef8c
Oops: Kernel access of bad area, sig: 7 [#1]
SMP NR_CPUS=2048
NUMA
PowerNV
Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common
CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761da #2
task: c00000ffd4892400 task.stack: c00000ffd4920000
NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320
REGS: c00000ffffc33710 TRAP: 0600   Not tainted  (4.11.0-rc8-00088-g4c761da)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>
  CR: 24082042  XER: 00000000
CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1
GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100
GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000
GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f
GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001
GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000
GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a
GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100
NIP [c00000000080ef8c] __skb_clone+0xdc/0x140
LR [c00000000080eee8] __skb_clone+0x38/0x140
Call Trace:
[c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable)
[c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510
[c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80
[c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0
[c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260
[c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x]
[c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480
[c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0
[c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120
[c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200
[c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24
[c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110
[c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Unlock on error in qed_vf_pf_acquire()

[ Upstream commit 66117a9d9a8ca948680d6554769ef9e88f936954 ]

My static checker complains that we're holding a mutex on this error
path.  Let's goto exit instead of returning directly.

Fixes: b0bccb69eba3 ("qed: Change locking scheme for VF channel")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vxlan: correctly handle ipv6.disable module parameter

[ Upstream commit d074bf9600443403aa24fbc12c1f18eadc90f5aa ]

When IPv6 is compiled but disabled at runtime, __vxlan_sock_add returns
-EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole
operation of bringing up the tunnel.

Ignore failure of IPv6 socket creation for metadata based tunnels caused by
IPv6 not being available.

Fixes: b1be00a6c39f ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_ldisc: Add protocol check to hci_uart_tx_wakeup()

[ Upstream commit 2d6f1da168e1d62c47f7d50135ac4cbd8411dcb1 ]

Before attempting to schedule a work-item onto hu->write_work in
hci_uart_tx_wakeup(), check that the Data Link protocol layer is
still bound to the HCI UART driver.

Failure to perform this protocol check causes a race condition between
the work queue hu->write_work running hci_uart_write_work() and the
Data Link protocol layer being unbound (closed) in hci_uart_tty_close().

Note hci_uart_tty_close() does have a "cancel_work_sync(&hu->write_work)"
but it is ineffective because it cannot prevent work-items being added
to hu->write_work after cancel_work_sync() has run.

Therefore, add a check for HCI_UART_PROTO_READY into hci_uart_tx_wakeup()
which prevents scheduling of the work queue when HCI_UART_PROTO_READY
is in the clear state. However, note a small race condition remains
because the hci_uart_tx_wakeup() thread can run in parallel with the
hci_uart_tty_close() thread so it is possible that a schedule of
hu->write_work can occur when HCI_UART_PROTO_READY is cleared. A complete
solution needs locking of the threads which is implemented in a future
commit.

Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_ldisc: Add protocol check to hci_uart_dequeue()

[ Upstream commit 048e1bd3a27fbeb84ccdff52e165370c1339a193 ]

Before attempting to dequeue a Data Link protocol encapsulated message,
check that the Data Link protocol is still bound to the HCI UART driver.
This makes the code consistent with the usage of the other proto
function pointers.

Therefore, add a check for HCI_UART_PROTO_READY into hci_uart_dequeue()
and return NULL if the Data Link protocol is not bound.

This is needed for robustness as there is a scheduling race condition.
hci_uart_write_work() is scheduled to run via work queue hu->write_work
from hci_uart_tx_wakeup(). Therefore, there is a delay between
scheduling hci_uart_write_work() to run and hci_uart_dequeue() running
whereby the Data Link protocol layer could become unbound during the
scheduling delay. In this case, without the check, the call to the
unbound Data Link protocol layer dequeue function can crash.

It is noted that hci_uart_tty_close() has a
"cancel_work_sync(&hu->write_work)" statement but this only reduces
the window of the race condition because it is possible for a new
work-item to be added to work queue hu->write_work after the call to
cancel_work_sync(). For example, Data Link layer retransmissions can
be added to the work queue after the cancel_work_sync() has finished.

Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc/fsl/qe: round brg_freq to 1kHz granularity

[ Upstream commit 2ccf80b7566cc035d903dd0ac5d7ebd25c2c1060 ]

Because of integer computation rounding in u-boot (that sets the QE
brg-frequency DTS prop), the clk value is 99999999 Hz even though it is
100 MHz.

When setting brg clks that are exact divisors of 100 MHz, this small
differnce plays a role and can result in lower clks to be output (for
instance 20 MHz - divide by 5 - results in 16.666 MHz - divide by 6).

This patch fixes that by "forcing" the brg_clk to the nearest kHz when
the difference is below 2 integer rounding errors (i.e. 4).

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: ucc_geth: fix MEM_PART_MURAM mode

[ Upstream commit 8b8642af15ed14b9a7a34d3401afbcc274533e13 ]

Since commit 5093bb965a163 ("powerpc/QE: switch to the cpm_muram
implementation"), muram area is not part of immrbar mapping anymore
so immrbar_virt_to_phys() is not usable anymore.

Fixes: 5093bb965a163 ("powerpc/QE: switch to the cpm_muram implementation")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Li Yang <pku.leo@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbevf: fix size of queue stats length

[ Upstream commit f87fc44770f54ff1b54d44ae9cec11f10efeca02 ]

IXGBEVF_QUEUE_STATS_LEN is based on ixgebvf_stats, not ixgbe_stats.

This change fixes a bug where ethtool -S displayed some empty fields.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: Fix lockdep splat with generic/270 test

[ Upstream commit c52c47e4b4fbe4284602fc2ccbfc4a4d8dc05b49 ]

I've hit a lockdep splat with generic/270 test complaining that:

3216.fsstress.b/3533 is trying to acquire lock:
 (jbd2_handle){++++..}, at: [<ffffffff813152e0>] jbd2_log_wait_commit+0x0/0x150

but task is already holding lock:
 (jbd2_handle){++++..}, at: [<ffffffff8130bd3b>] start_this_handle+0x35b/0x850

The underlying problem is that jbd2_journal_force_commit_nested()
(called from ext4_should_retry_alloc()) may get called while a
transaction handle is started. In such case it takes care to not wait
for commit of the running transaction (which would deadlock) but only
for a commit of a transaction that is already committing (which is safe
as that doesn't wait for any filesystem locks).

In fact there are also other callers of jbd2_log_wait_commit() that take
care to pass tid of a transaction that is already committing and for
those cases, the lockdep instrumentation is too restrictive and leading
to false positive reports. Fix the problem by calling
jbd2_might_wait_for_commit() from jbd2_log_wait_commit() only if the
transaction isn't already committing.

Fixes: 1eaa566d368b214d99cbb973647c1b0b8102a9ae
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/kms: Increase max retries in scanout position queries.

[ Upstream commit 60b95d709525e3ce1c51e1fc93175dcd1755d345 ]

So far we only allowed for 1 retry and just failed the query
- and thereby high precision vblank timestamping - if we did
not get a reasonable result, as such a failure wasn't considered
all too horrible. There are a few NVidia gpu models out there which
may need a bit more than 1 retry to get a successful query result
under some conditions.

Since Linux 4.4 the update code for vblank counter and timestamp
in drm_update_vblank_count() changed so that the implementation
assumes that high precision vblank timestamping of a kms driver
either consistently succeeds or consistently fails for a given
video mode and encoder/connector combo. Iow. switching from success
to fail or vice versa on a modeset or connector change is ok, but
spurious temporary failure for a given setup can confuse the core
code and potentially cause bad miscounting of vblanks and confusion
or hangs in userspace clients which rely on vblank  stuff, e.g.,
desktop compositors.

Therefore change the max retry count to a larger number - more than
any gpu so far is known to need to succeed, but still low enough
so that these queries which do also happen in vblank interrupt are
still fast enough to be not disastrously long if something would
go badly wrong with them.

As such sporadic retries only happen seldom even on affected gpu's,
this could mean a vblank irq could take a few dozen microseconds
longer every few hours of uptime -- better than a desktop compositor
randomly hanging every couple of hours or days of uptime in a hard
to reproduce manner.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix gpu reset crash

[ Upstream commit 51687759be93fbc553f2727e86be25c38126ba93 ]

[  413.687439] BUG: unable to handle kernel NULL pointer dereference at 0000000000000548
[  413.687479] IP: [<ffffffff8109b175>] to_live_kthread+0x5/0x60
[  413.687507] PGD 1efd12067
[  413.687519] PUD 1efd11067
[  413.687531] PMD 0

[  413.687543] Oops: 0000 [#1] SMP
[  413.687557] Modules linked in: amdgpu(OE) ttm(OE) drm_kms_helper(E) drm(E) i2c_algo_bit(E) fb_sys_fops(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) rpcsec_gss_krb5(E) nfsv4(E) nfs(E) fscache(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) eeepc_wmi(E) snd_hda_codec(E) asus_wmi(E) snd_hda_core(E) sparse_keymap(E) snd_hwdep(E) video(E) snd_pcm(E) snd_seq_midi(E) joydev(E) snd_seq_midi_event(E) snd_rawmidi(E) snd_seq(E) snd_seq_device(E) snd_timer(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) snd(E) crc32_pclmul(E) ghash_clmulni_intel(E) soundcore(E) aesni_intel(E) aes_x86_64(E) lrw(E) gf128mul(E) glue_helper(E) ablk_helper(E) cryptd(E) shpchp(E) serio_raw(E) i2c_piix4(E) 8250_dw(E) i2c_designware_platform(E) i2c_designware_core(E) mac_hid(E) binfmt_misc(E)
[  413.687894]  parport_pc(E) ppdev(E) lp(E) parport(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) autofs4(E) hid_generic(E) usbhid(E) hid(E) psmouse(E) ahci(E) r8169(E) mii(E) libahci(E) wmi(E)
[  413.687989] CPU: 13 PID: 1134 Comm: kworker/13:2 Tainted: G           OE   4.9.0-custom #4
[  413.688019] Hardware name: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 0606 04/06/2017
[  413.688089] Workqueue: events amd_sched_job_timedout [amdgpu]
[  413.688116] task: ffff88020f9657c0 task.stack: ffffc90001a88000
[  413.688139] RIP: 0010:[<ffffffff8109b175>]  [<ffffffff8109b175>] to_live_kthread+0x5/0x60
[  413.688171] RSP: 0018:ffffc90001a8bd60  EFLAGS: 00010282
[  413.688191] RAX: ffff88020f0073f8 RBX: ffff88020f000000 RCX: 0000000000000000
[  413.688217] RDX: 0000000000000001 RSI: ffff88020f9670c0 RDI: 0000000000000000
[  413.688243] RBP: ffffc90001a8bd78 R08: 0000000000000000 R09: 0000000000001000
[  413.688269] R10: 0000006051b11a82 R11: 0000000000000001 R12: 0000000000000000
[  413.688295] R13: ffff88020f002770 R14: ffff88020f004838 R15: ffff8801b23c2c60
[  413.688321] FS:  0000000000000000(0000) GS:ffff88021ef40000(0000) knlGS:0000000000000000
[  413.688352] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  413.688373] CR2: 0000000000000548 CR3: 00000001efd0f000 CR4: 00000000003406e0
[  413.688399] Stack:
[  413.688407]  ffffffff8109b304 ffff88020f000000 0000000000000070 ffffc90001a8bdf0
[  413.688439]  ffffffffa05ce29d ffffffffa052feb7 ffffffffa07b5820 ffffc90001a8bda0
[  413.688470]  ffffffff00000018 ffff8801bb88f060 0000000001a8bdb8 ffff88021ef59280
[  413.688502] Call Trace:
[  413.688514]  [<ffffffff8109b304>] ? kthread_park+0x14/0x60
[  413.688555]  [<ffffffffa05ce29d>] amdgpu_gpu_reset+0x7d/0x670 [amdgpu]
[  413.688589]  [<ffffffffa052feb7>] ? drm_printk+0x97/0xa0 [drm]
[  413.688643]  [<ffffffffa0698136>] amdgpu_job_timedout+0x46/0x50 [amdgpu]
[  413.688700]  [<ffffffffa06969e7>] amd_sched_job_timedout+0x17/0x20 [amdgpu]
[  413.688727]  [<ffffffff81095493>] process_one_work+0x153/0x3f0
[  413.688751]  [<ffffffff81095c5b>] worker_thread+0x12b/0x4b0
[  413.688773]  [<ffffffff8100392e>] ? do_syscall_64+0x6e/0x180
[  413.688795]  [<ffffffff81095b30>] ? rescuer_thread+0x350/0x350
[  413.688818]  [<ffffffff8100392e>] ? do_syscall_64+0x6e/0x180
[  413.688839]  [<ffffffff8109b423>] kthread+0xd3/0xf0
[  413.688858]  [<ffffffff8109b350>] ? kthread_park+0x60/0x60
[  413.688881]  [<ffffffff817e1ee5>] ret_from_fork+0x25/0x30
[  413.688901] Code: 25 40 d3 00 00 48 8b 80 48 05 00 00 48 89 e5 5d 48 8b 40 c8 48 c1 e8 02 83 e0 01 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b b7 48 05 00 00 55 48 89 e5 48 85 f6 74 31 8b 97 f8 18 00
[  413.689045] RIP  [<ffffffff8109b175>] to_live_kthread+0x5/0x60
[  413.689064]  RSP <ffffc90001a8bd60>
[  413.689076] CR2: 0000000000000548
[  413.697985] ---[ end trace 0a314a64821f84e9 ]---

The root cause is some ring doesn't have scheduler, like KIQ ring

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / PMIC: xpower: Fix power_table addresses

[ Upstream commit 2bde7c32b1db162692f05c6be066b5bcd3d9fdbe ]

The power table addresses should be contiguous, but there was a hole
where 0x34 was missing. On most devices this is not a problem as
addresses above 0x34 are used for the BUC# convertors which are not
used in the DSDTs I've access to but after the BUC# convertors
there is a field named GPI1 in the DSTDs, which does get used in some
cases and ended up turning BUC6 on and off due to the wrong addresses,
resulting in turning the entire device off (or causing it to reboot).

Removing the hole in the addresses fixes this, fixing one of my
Bay Trail tablets turning off while booting the mainline kernel.

While at it add comments with the field names used in the DSDTs to
make it easier to compare the register and bits used at each address
with the datasheet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi/watchdog: fix wdog hang on panic waiting for ipmi response

[ Upstream commit 2c1175c2e8e5487233cabde358a19577562ac83e ]

Commit c49c097610fe ("ipmi: Don't call receive handler in the
panic context") means that the panic_recv_free is not called during a
panic and the atomic count does not drop to 0.

Fix this by only expecting one decrement of the atomic variable
which comes from panic_smi_free.

Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: asus-wmi: try to set als by default

[ Upstream commit e9b615186805e2c18a0ac76aca62c1543ecfdbb8 ]

some laptops, for example ASUS UX330UAK, have brocken als_get function
but working als_set funktion. In this case, ALS will stay turned off.

             Method (WMNB, 3, Serialized)
            {
    ...
               If (Local0 == 0x53545344)
                {
...
                    If (IIA0 == 0x00050001)
                    {
                        If (!ALSP)
                        {
                            Return (0x02)
                        }

                        Local0 = (GALS & 0x10)    <<<---- bug,
                                                    should be: (GALS () & 0x10)
                        If (Local0)
                        {
                            Return (0x00050001)
                        }
                        Else
                        {
                            Return (0x00050000)
                        }
                    }

             .....
                If (Local0 == 0x53564544)
                {
...
                    If (IIA0 == 0x00050001)
                    {
                        Return (ALSC (IIA1))
                    }

                  ......
                    Method (GALS, 0, NotSerialized)
                    {
                        Local0 = Zero
                        Local0 |= 0x20
                        If (ALAE)
                        {
                            Local0 |= 0x10
                        }

                        Local1 = 0x0A
                        Local1 <<= 0x08
                        Local0 |= Local1
                        Return (Local0)
                    }

Since it works without problems on Windows I assume ASUS WMI driver for Win
never trying to get ALS state, and instead it is setting it by default to ON.

This patch will do the same. Turn ALS on by default.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Fix softlockup issue

[ Upstream commit 22546b741af8355cd2e16739b6af4a8f17081839 ]

Soft lockups can occur because the mad processing on different CPUs acquire
the spin lock dc8051_lock:

[534552.835870]  [<ffffffffa026f993>] ? read_dev_port_cntr.isra.37+0x23/0x160 [hfi1]
[534552.835880]  [<ffffffffa02775af>] read_dev_cntr+0x4f/0x60 [hfi1]
[534552.835893]  [<ffffffffa028d7cd>] pma_get_opa_portstatus+0x64d/0x8c0 [hfi1]
[534552.835904]  [<ffffffffa0290e7d>] hfi1_process_mad+0x48d/0x18c0 [hfi1]
[534552.835908]  [<ffffffff811dc1f1>] ? __slab_free+0x81/0x2f0
[534552.835936]  [<ffffffffa024c34e>] ? ib_mad_recv_done+0x21e/0xa30 [ib_core]
[534552.835939]  [<ffffffff811dd153>] ? __kmalloc+0x1f3/0x240
[534552.835947]  [<ffffffffa024c3fb>] ib_mad_recv_done+0x2cb/0xa30 [ib_core]
[534552.835955]  [<ffffffffa0237c85>] __ib_process_cq+0x55/0xd0 [ib_core]
[534552.835962]  [<ffffffffa0237d70>] ib_cq_poll_work+0x20/0x60 [ib_core]
[534552.835964]  [<ffffffff810a7f3b>] process_one_work+0x17b/0x470
[534552.835966]  [<ffffffff810a8d76>] worker_thread+0x126/0x410
[534552.835969]  [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460
[534552.835971]  [<ffffffff810b052f>] kthread+0xcf/0xe0
[534552.835974]  [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140
[534552.835977]  [<ffffffff81696418>] ret_from_fork+0x58/0x90
[534552.835980]  [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140

This issue is made worse when the 8051 is busy and the reads take longer.
Fix by using a non-spinning lock procure.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciszyn <mike.marciniszyn@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/rdmavt: restore IRQs on error path in rvt_create_ah()

[ Upstream commit f0bb2d44ca26b7090dc7bade8877b77005f07dfc ]

We need to call spin_unlock_irqrestore() instead of vanilla
spin_unlock() on this error path.

Fixes: 119a8e708d16 ("IB/rdmavt: Add AH to rdmavt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP

[ Upstream commit 2c949ce38f4e81d7487f165fa3b8f77d74a2a6c4 ]

The PCIe programming sequence in TRM suggests CLKSTCTRL of PCIe should be
set to SW_WKUP. There are no issues when CLKSTCTRL is set to HW_AUTO in RC
mode. However in EP mode, the host system is not able to access the
MEMSPACE and setting the CLKSTCTRL to SW_WKUP fixes it.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: unlock on error in xt_find_table_lock()

[ Upstream commit 7dde07e9c53617549d67dd3e1d791496d0d3868e ]

According to my static checker we should unlock here before the return.
That seems reasonable to me as well.

Fixes" b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a

[ Upstream commit a627f025eb0534052ff451427c16750b3530634c ]

The ls1046a datasheet specified that the max SD clock frequency
for eSDHC SDR104/HS200 was 167MHz, and the ls1012a datasheet
specified it's 125MHz for ls1012a. So this patch is to add the
limitation.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: Fix possible sband related NULL pointer de-reference

[ Upstream commit 21a8e9dd52b64f0170bad208293ef8c30c3c1403 ]

Existing API 'ieee80211_get_sdata_band' returns default 2 GHz band even
if the channel context configuration is NULL. This crashes for chipsets
which support 5 Ghz alone when it tries to access members of 'sband'.
Channel context configuration can be NULL in multivif case and when
channel switch is in progress (or) when it fails. Fix this by replacing
the API 'ieee80211_get_sdata_band' with  'ieee80211_get_sband' which
returns a NULL pointer for sband when the channel configuration is NULL.

An example scenario is as below:

In multivif mode (AP + STA) with drivers like ath10k, when we do a
channel switch in the AP vif (which has a number of clients connected)
and a STA vif which is connected to some other AP, when the channel
switch in AP vif fails, while the STA vifs tries to connect to the
other AP, there is a window where the channel context is NULL/invalid
and this results in a crash  while the clients connected to the AP vif
tries to reconnect and this race is very similar to the one investigated
by Michal in https://patchwork.kernel.org/patch/3788161/ and this does
happens with hardware that supports 5Ghz alone after long hours of
testing with continuous channel switch on the AP vif

ieee80211 phy0: channel context reservation cannot be finalized because
some interfaces aren't switching
wlan0: failed to finalize CSA, disconnecting
wlan0-1: deauthenticating from 8c:fd:f0:01:54:9c by local choice
(Reason: 3=DEAUTH_LEAVING)

WARNING: CPU: 1 PID: 19032 at net/mac80211/ieee80211_i.h:1013 sta_info_alloc+0x374/0x3fc [mac80211]
[<bf77272c>] (sta_info_alloc [mac80211])
[<bf78776c>] (ieee80211_add_station [mac80211]))
[<bf73cc50>] (nl80211_new_station [cfg80211])

Unable to handle kernel NULL pointer dereference at virtual
address 00000014
pgd = d5f4c000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
PC is at sta_info_alloc+0x380/0x3fc [mac80211]
LR is at sta_info_alloc+0x37c/0x3fc [mac80211]
[<bf772738>] (sta_info_alloc [mac80211])
[<bf78776c>] (ieee80211_add_station [mac80211])
[<bf73cc50>] (nl80211_new_station [cfg80211]))

Cc: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvs: explicitly forbid ipv6 service/dest creation if ipv6 mod is disabled

[ Upstream commit 1442f6f7c1b77de1c508318164a527e240c24a4d ]

When creating a new ipvs service, ipv6 addresses are always accepted
if CONFIG_IP_VS_IPV6 is enabled. On dest creation the address family
is not explicitly checked.

This allows the user-space to configure ipvs services even if the
system is booted with ipv6.disable=1. On specific configuration, ipvs
can try to call ipv6 routing code at setup time, causing the kernel to
oops due to fib6_rules_ops being NULL.

This change addresses the issue adding a check for the ipv6
module being enabled while validating ipv6 service operations and
adding the same validation for dest operations.

According to git history, this issue is apparently present since
the introduction of ipv6 support, and the oops can be triggered
since commit 09571c7ae30865ad ("IPVS: Add function to determine
if IPv6 address is local")

Fixes: 09571c7ae30865ad ("IPVS: Add function to determine if IPv6 address is local")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix unchecked return value

[ Upstream commit 9e96652756ad647b7bcc03cb99ffc9756d7b5f93 ]

Function dev_alloc_skb() will return a NULL pointer if there is no
enough memory. However, in function WILC_WFI_mon_xmit(), its return
value is used without validation. This may result in a bad memory access
bug. This patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorhba: fix s-Par to boot with option CONFIG_VMAP_STACK set to y

[ Upstream commit 3c2bf0bd08123f3497bd3e84bd9088c937b0cb40 ]

The root issue is that we are not allowed to have items on the
stack being passed to "DMA" like operations. In this case we have
a vmcall and an inline completion of scsi command.

This patch fixes the issue by moving the variables on stack in
do_scsi_nolinuxstat() to heap memory.

Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: gpio-wcove: fix GPIO IRQ status mask

[ Upstream commit 881ebd229f4a5ea88f269c1225245e50db9ba303 ]

According to Whiskey Cove PMIC spec, bit 7 of GPIOIRQ0_REG belongs to
battery IO. So we should skip this bit when checking for GPIO IRQ pending
status. Otherwise, wcove_gpio_irq_handler() might go into the infinite
loop until IRQ "pending" status becomes 0. This patch fixes this issue.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails

[ Upstream commit da63b6b20077469bd6bd96e07991ce145fc4fbc4 ]

Dave found that a kdump kernel with KASLR enabled will reset to the BIOS
immediately if physical randomization failed to find a new position for
the kernel. A kernel with the 'nokaslr' option works in this case.

The reason is that KASLR will install a new page table for the identity
mapping, while it missed building it for the original kernel location
if KASLR physical randomization fails.

This only happens in the kexec/kdump kernel, because the identity mapping
has been built for kexec/kdump in the 1st kernel for the whole memory by
calling init_pgtable(). Here if physical randomizaiton fails, it won't build
the identity mapping for the original area of the kernel but change to a
new page table '_pgtable'. Then the kernel will triple fault immediately
caused by no identity mappings.

The normal kernel won't see this bug, because it comes here via startup_32()
and CR3 will be set to _pgtable already. In startup_32() the identity
mapping is built for the 0~4G area. In KASLR we just append to the existing
area instead of entirely overwriting it for on-demand identity mapping
building. So the identity mapping for the original area of kernel is still
there.

To fix it we just switch to the new identity mapping page table when physical
KASLR succeeds. Otherwise we keep the old page table unchanged just like
"nokaslr" does.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1493278940-5885-1-git-send-email-bhe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtip32xx: use runtime tag to initialize command header

[ Upstream commit a4e84aae8139aca9fbfbced1f45c51ca81b57488 ]

mtip32xx supposes that 'request_idx' passed to .init_request()
is tag of the request, and use that as request's tag to initialize
command header.

After MQ IO scheduler is in, request tag assigned isn't same with
the request index anymore, so cause strange hardware failure on
mtip32xx, even whole system panic is triggered.

This patch fixes the issue by initializing command header via
request's real tag.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: palmas: Reset the POWERHOLD mux during power off

[ Upstream commit 85fdaf8eb9bbec1f0f8a52fd5d85659d60738816 ]

POWERHOLD signal has higher priority  over the DEV_ON bit.
So power off will not happen if the POWERHOLD is held high.
Hence reset the MUX to GPIO_7 mode to release the POWERHOLD
and the DEV_ON bit to take effect to power off the PMIC.

PMIC Power off happens in dire situations like thermal shutdown
so irrespective of the POWERHOLD setting go ahead and turn off
the powerhold.  Currently poweroff is broken on boards that have
powerhold enabled. This fixes poweroff on those boards.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: mfd: axp20x: Add "xpowers,master-mode" property for AXP806 PMICs

[ Upstream commit 8461cf20d17e0090e9236b73d25b31be4f7fadc5 ]

commit b101829a029a ("mfd: axp20x: Fix AXP806 access errors on cold boot")
was intended to fix the case where a board uses an AXP806 in slave mode,
but the boot loader leaves it in master mode for lack of AXP806 support.
But now the driver breaks on boards where the PMIC is operating in master
mode. To let the device tree describe which mode of operation is needed,
this patch introduces a new property "xpowers,master-mode".

Fixes: 204ae2963e10 ("mfd: axp20x: Add bindings for AXP806 PMIC")
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value

[ Upstream commit c894acc7bf400d039bf740420b22f0b71b7fb504 ]

Ensure that when an invalid value in ret or value is found -EINVAL
is returned. A previous commit broke the way the return error is
being returned and instead caused the return code in ret to be
re-assigned rather than be returned.

Fixes: 5d9854eaea776 ("iio: hid-sensor: Store restore poll and hysteresis on S3")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: iasl: Fix IORT SMMU GSI disassembling

[ Upstream commit bb1e23e66e6237ff7a1824b37366540a89149c33 ]

ACPICA commit 637b88de24a78c20478728d9d66632b06fcaa5bf

If the IORT template is compiled and then iort.aml binary disassembled to
iort.dsl, SMMUv1 node lists incorrect offset for SMMU_Nsg_cfg_irpt Interrupt:
[0ECh 0236   8]       SMMU_Nsg_irpt Interrupt : 0000000000000000
[0ECh 0236   8]    SMMU_Nsg_cfg_irpt Interrupt : 0000000000000000
This is because iasl hasn't implemented SMMU GSI decoding yet.

This patch fixes this issue by preparing structures for decoding IORT SMMU
GSI. ACPICA BZ 1340, reported by Alexei Fedorov, fixed by Lv Zheng.

Link: https://github.com/acpica/acpica/commit/637b88de
Link: https://bugs.acpica.org/show_bug.cgi?id=1340
Reported-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: don't parse encrypted management frames in ieee80211_frame_acked

[ Upstream commit cf147085fdda044622973a12e4e06f1c753ab677 ]

ieee80211_frame_acked is called when a frame is acked by
the peer. In case this is a management frame, we check
if this an SMPS frame, in which case we can update our
antenna configuration.

When we parse the management frame we look at the category
in case it is an action frame. That byte sits after the IV
in case the frame was encrypted. This means that if the
frame was encrypted, we basically look at the IV instead
of looking at the category. It is then theorically
possible that we think that an SMPS action frame was acked
where really we had another frame that was encrypted.

Since the only management frame whose ack needs to be
tracked is the SMPS action frame, and that frame is not
a robust management frame, it will never be encrypted.
The easiest way to fix this problem is then to not look
at frames that were encrypted.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

orangefs: do not wait for timeout if umounting

[ Upstream commit b5a9d61eebdd0016ccb383b25a5c3d04977a6549 ]

When the computer is turned off, all the processes are killed and then
all the filesystems are umounted.  OrangeFS should not wait for the
userspace daemon to come back in that case.

This only works for plain umount(2).  To actually take advantage of this
interactively, `umount -f' is needed; otherwise umount will issue a
statfs first, which will wait for the userspace daemon to come back.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix extent map leak during fallocate error path

[ Upstream commit be2d253cc98244765323a7c94cc1ac5cd5a17072 ]

If the call to btrfs_qgroup_reserve_data() failed, we were leaking an
extent map structure. The failure can happen either due to an -ENOMEM
condition or, when quotas are enabled, due to -EDQUOT for example.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: send, fix file hole not being preserved due to inline extent

[ Upstream commit e1cbfd7bf6dabdac561c75d08357571f44040a45 ]

Normally we don't have inline extents followed by regular extents, but
there's currently at least one harmless case where this happens. For
example, when the page size is 4Kb and compression is enabled:

  $ mkfs.btrfs -f /dev/sdb
  $ mount -o compress /dev/sdb /mnt
  $ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "fsync" /mnt/foobar
  $ xfs_io -c "pwrite -S 0xbb 8K 4K" -c "fsync" /mnt/foobar

In this case we get a compressed inline extent, representing 4Kb of
data, followed by a hole extent and then a regular data extent. The
inline extent was not expanded/converted to a regular extent exactly
because it represents 4Kb of data. This does not cause any apparent
problem (such as the issue solved by commit e1699d2d7bf6
("btrfs: add missing memset while reading compressed inline extents"))
except trigger an unexpected case in the incremental send code path
that makes us issue an operation to write a hole when it's not needed,
resulting in more writes at the receiver and wasting space at the
receiver.

So teach the incremental send code to deal with this particular case.

The issue can be currently triggered by running fstests btrfs/137 with
compression enabled (MOUNT_OPTIONS="-o compress" ./check btrfs/137).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix incorrect space accounting after failure to insert inline extent

[ Upstream commit 1c81ba237bcecad9bc885a1ddcf02d725ea38482 ]

When using compression, if we fail to insert an inline extent we
incorrectly end up attempting to free the reserved data space twice,
once through extent_clear_unlock_delalloc(), because we pass it the
flag EXTENT_DO_ACCOUNTING, and once through a direct call to
btrfs_free_reserved_data_space_noquota(). This results in a trace
like the following:

[  834.576240] ------------[ cut here ]------------
[  834.576825] WARNING: CPU: 2 PID: 486 at fs/btrfs/extent-tree.c:4316 btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  834.579501] Modules linked in: btrfs crc32c_generic xor raid6_pq ppdev i2c_piix4 acpi_cpufreq psmouse tpm_tis parport_pc pcspkr serio_raw tpm_tis_core sg parport evdev i2c_core tpm button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs]
[  834.592116] CPU: 2 PID: 486 Comm: kworker/u32:4 Not tainted 4.10.0-rc8-btrfs-next-37+ #2
[  834.593316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[  834.595273] Workqueue: btrfs-delalloc btrfs_delalloc_helper [btrfs]
[  834.596103] Call Trace:
[  834.596103]  dump_stack+0x67/0x90
[  834.596103]  __warn+0xc2/0xdd
[  834.596103]  warn_slowpath_null+0x1d/0x1f
[  834.596103]  btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  834.596103]  compress_file_range.constprop.42+0x2fa/0x3fc [btrfs]
[  834.596103]  ? submit_compressed_extents+0x3a7/0x3a7 [btrfs]
[  834.596103]  async_cow_start+0x32/0x4d [btrfs]
[  834.596103]  btrfs_scrubparity_helper+0x187/0x3e7 [btrfs]
[  834.596103]  btrfs_delalloc_helper+0xe/0x10 [btrfs]
[  834.596103]  process_one_work+0x273/0x4e4
[  834.596103]  worker_thread+0x1eb/0x2ca
[  834.596103]  ? rescuer_thread+0x2b6/0x2b6
[  834.596103]  kthread+0x100/0x108
[  834.596103]  ? __list_del_entry+0x22/0x22
[  834.596103]  ret_from_fork+0x2e/0x40
[  834.611656] ---[ end trace 719902fe6bdef08f ]---

So fix this by not calling directly btrfs_free_reserved_data_space_noquota()
if an error happened.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rndis_wlan: add return value validation

[ Upstream commit 9dc7efd3978aa67ae598129d2a3f240b390ce508 ]

Function create_singlethread_workqueue() will return a NULL pointer if
there is no enough memory, and its return value should be validated
before using. However, in function rndis_wlan_bind(), its return value
is not checked. This may cause NULL dereference bugs. This patch fixes
it.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libertas: check return value of alloc_workqueue

[ Upstream commit dc3f89c38a8406554ffeffa370aad086a9c5e9de ]

Function alloc_workqueue() will return a NULL pointer if there is no
enough memory, and its return value should be validated before using.
However, in function if_spi_probe(), its return value is not checked.
This may result in a NULL dereference bug. This patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mt7601u: check return value of alloc_skb

[ Upstream commit 5fb01e91daf84ad1e50edfcf63116ecbe31e7ba7 ]

Function alloc_skb() will return a NULL pointer if there is no enough
memory. However, in function mt7601u_mcu_msg_alloc(), its return value
is not validated before it is used. This patch fixes it.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: st_pressure: st_accel: Initialise sensor platform data properly

[ Upstream commit 7383d44b84c94aaca4bf695a6bd8a69f2295ef1a ]

This patch fixes the sensor platform data initialisation for st_pressure
and st_accel device drivers. Without this patch, the driver fails to
register the sensors when the user removes and re-loads the driver.

1. Unload the kernel modules for st_pressure
$ sudo rmmod st_pressure_i2c
$ sudo rmmod st_pressure

2. Re-load the driver
$ sudo insmod st_pressure
$ sudo insmod st_pressure_i2c

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: don't try to cross a mountpount when there isn't one there.

[ Upstream commit 99bbf6ecc694dfe0b026e15359c5aa2a60b97a93 ]

consider the sequence of commands:
 mkdir -p /import/nfs /import/bind /import/etc
 mount --bind / /import/bind
 mount --make-private /import/bind
 mount --bind /import/etc /import/bind/etc

 exportfs -o rw,no_root_squash,crossmnt,async,no_subtree_check localhost:/
 mount -o vers=4 localhost:/ /import/nfs
 ls -l /import/nfs/etc

You would not expect this to report a stale file handle.
Yet it does.

The manipulations under /import/bind cause the dentry for
/etc to get the DCACHE_MOUNTED flag set, even though nothing
is mounted on /etc.  This causes nfsd to call
nfsd_cross_mnt() even though there is no mountpoint.  So an
upcall to mountd for "/etc" is performed.

The 'crossmnt' flag on the export of / causes mountd to
report that /etc is exported as it is a descendant of /.  It
assumes the kernel wouldn't ask about something that wasn't
a mountpoint.  The filehandle returned identifies the
filesystem and the inode number of /etc.

When this filehandle is presented to rpc.mountd, via
"nfsd.fh", the inode cannot be found associated with any
name in /etc/exports, or with any mountpoint listed by
getmntent().  So rpc.mountd says the filehandle doesn't
exist. Hence ESTALE.

This is fixed by teaching nfsd not to trust DCACHE_MOUNTED
too much.  It is just a hint, not a guarantee.
Change nfsd_mountpoint() to return '1' for a certain mountpoint,
'2' for a possible mountpoint, and 0 otherwise.

Then change nfsd_crossmnt() to check if follow_down()
actually found a mountpount and, if not, to avoid performing
a lookup if the location is not known to certainly require
an export-point.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xprtrdma: Cancel refresh worker during buffer shutdown

[ Upstream commit 9378b274e1eb6925db315e345f48850d2d5d9789 ]

Trying to create MRs while the transport is being torn down can
cause a crash.

Fixes: e2ac236c0b65 ("xprtrdma: Allocate MRs on demand")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pNFS: Fix use after free issues in pnfs_do_read()

[ Upstream commit 6aeafd05eca9bc8ab6b03d7e56d09ffd18190f44 ]

The assumption should be that if the caller returns PNFS_ATTEMPTED, then hdr
has been consumed, and so we should not be testing hdr->task.tk_status.
If the caller returns PNFS_TRY_AGAIN, then we need to recoalesce and
free hdr.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

infiniband/uverbs: Fix integer overflows

[ Upstream commit 4f7f4dcfff2c19debbcdbcc861c325610a15e0c5 ]

The 'num_sge' variable is verfied to be smaller than the 'sge_count'
variable; however, since both are user-controlled it's possible to cause
an integer overflow for the kmalloc multiply on 32-bit platforms
(num_sge and sge_count are both defined u32). By crafting an input that
causes a smaller-than-expected allocation it's possible to write
controlled data out-of-bounds.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mac_esp: Replace bogus memory barrier with spinlock

[ Upstream commit 4da2b1eb230ba4ad19b58984dc52e05b1073df5f ]

Commit da244654c66e ("[SCSI] mac_esp: fix for quadras with two esp
chips") added mac_scsi_esp_intr() to handle the IRQ lines from a pair of
on-board ESP chips (a normal shared IRQ did not work).

Proper mutual exclusion was missing from that patch. This patch fixes
race conditions between comparison and assignment of esp_chips[]
pointers.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: intel-vbtn: add volume up and down

[ Upstream commit 8d9e29972836b75eb74f533594999500a4c7cc19 ]

Tested on HP Elite X2 1012 G1.
Matches event report of Lenovo Helix 2
(https://www.spinics.net/lists/ibm-acpi-devel/msg03982.html).

Signed-off-by: Maarten Maathuis <madman2003@shikahr.net>
[andy: fixed indentation of comments and massaged title of the change]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_dynset: continue to next expr if _OP_ADD succeeded

[ Upstream commit 277a292835c196894ef895d5e1fd6170bb916f55 ]

Currently, after adding the following nft rules:
  # nft add set x target1 { type ipv4_addr \; flags timeout \;}
  # nft add rule x y set add ip daddr timeout 1d @target1 counter

the counters will always be zero despite of the elements are added
to the dynamic set "target1" or not, as we will break the nft expr
traversal unconditionally:
  # nft list ruleset
  ...
  set target1 {
      ...
      elements = { 8.8.8.8 expires 23h59m53s}
  }
  chain output {
      ...
      set add ip daddr timeout 1d @target1 counter packets 0 bytes 0
                                                           ^       ^
      ...
  }

Since we add the elements to the set successfully, we should continue
to the next expression.

Additionally, if elements are added to "flow table" successfully, we
will _always_ continue to the next expr, even if the operation is
_OP_ADD. So it's better to keep them to be consistent.

Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates")
Reported-by: Robert White <rwhite@pobox.com>
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qlcnic: fix unchecked return value

[ Upstream commit 91ec701a553cb3de470fd471c6fefe3ad1125455 ]

Function pci_find_ext_capability() may return 0, which is an invalid
address. In function qlcnic_sriov_virtid_fn(), its return value is used
without validation. This may result in invalid memory access bugs. This
patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wan: pc300too: abort path on failure

[ Upstream commit 2a39e7aa8a98f777f0732ca7125b6c9668791760 ]

In function pc300_pci_init_one(), on the ioremap error path, function
pc300_pci_remove_one() is called to free the allocated memory. However,
the path is not terminated, and the freed memory will be used later,
resulting in use-after-free bugs. This path fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: check return value of nlmsg_new

[ Upstream commit 78302fd405769c9a9379e9adda119d533dce2eed ]

Function nlmsg_new() will return a NULL pointer if there is no enough
memory, and its return value should be checked before it is used.
However, in function tipc_nl_node_get_monitor(), the validation of the
return value of function nlmsg_new() is missed. This patch fixes the
bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: host: omap_hsmmc: checking for NULL instead of IS_ERR()

[ Upstream commit ec5ab8933772c87f24ad62a4a602fe8949f423c2 ]

devm_pinctrl_get() returns error pointers, it never returns NULL.

Fixes: 455e5cd6f736 ("mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on AM335x")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_ct_helper: permit cthelpers with different names via nfnetlink

[ Upstream commit 66e5a6b18bd09d0431e97cd3c162e76c5c2aebba ]

cthelpers added via nfnetlink may have the same tuple, i.e. except for
the l3proto and l4proto, other fields are all zero. So even with the
different names, we will also fail to add them:
  # nfct helper add ssdp inet udp
  # nfct helper add tftp inet udp
  nfct v1.4.3: netlink error: File exists

So in order to avoid unpredictable behaviour, we should:
1. cthelpers can be selected by nft ct helper obj or xt_CT target, so
report error if duplicated { name, l3proto, l4proto } tuple exist.
2. cthelpers can be selected by nf_ct_tuple_src_mask_cmp when
nf_ct_auto_assign_helper is enabled, so also report error if duplicated
{ l3proto, l4proto, src-port } tuple exist.

Also note, if the cthelper is added from userspace, then the src-port will
always be zero, it's invalid for nf_ct_auto_assign_helper, so there's no
need to check the second point listed above.

Fixes: 893e093c786c ("netfilter: nf_ct_helper: bail out on duplicated helpers")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

openvswitch: Delete conntrack entry clashing with an expectation.

[ Upstream commit cf5d70918877c6a6655dc1e92e2ebb661ce904fd ]

Conntrack helpers do not check for a potentially clashing conntrack
entry when creating a new expectation.  Also, nf_conntrack_in() will
check expectations (via init_conntrack()) only if a conntrack entry
can not be found.  The expectation for a packet which also matches an
existing conntrack entry will not be removed by conntrack, and is
currently handled inconsistently by OVS, as OVS expects the
expectation to be removed when the connection tracking entry matching
that expectation is confirmed.

It should be noted that normally an IP stack would not allow reuse of
a 5-tuple of an old (possibly lingering) connection for a new data
connection, so this is somewhat unlikely corner case.  However, it is
possible that a misbehaving source could cause conntrack entries be
created that could then interfere with new related connections.

Fix this in the OVS module by deleting the clashing conntrack entry
after an expectation has been matched.  This causes the following
nf_conntrack_in() call also find the expectation and remove it when
creating the new conntrack entry, as well as the forthcoming reply
direction packets to match the new related connection instead of the
old clashing conntrack entry.

Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action")
Reported-by: Yang Song <yangsong@vmware.com>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_CT: fix refcnt leak on error path

[ Upstream commit 470acf55a021713869b9bcc967268ac90c8a0fac ]

There are two cases which causes refcnt leak.

1. When nf_ct_timeout_ext_add failed in xt_ct_set_timeout, it should
free the timeout refcnt.
Now goto the err_put_timeout error handler instead of going ahead.

2. When the time policy is not found, we should call module_put.
Otherwise, the related cthelper module cannot be removed anymore.
It is easy to reproduce by typing the following command:
  # iptables -t raw -A OUTPUT -p tcp -j CT --helper ftp --timeout xxx

Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: gpio-wcove: fix irq pending status bit width

[ Upstream commit 7c2d176fe3f8dce632b948f79c7e89916ffe2c70 ]

Whiskey cove PMIC has three GPIO banks with total number of 13 GPIO
pins. But when checking for the pending status, for_each_set_bit() uses
bit width of 7 and hence it only checks the status for first 7 GPIO pins
missing to check/clear the status of rest of the GPIO pins. This patch
fixes this issue.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix Express lane queue creation.

[ Upstream commit 7e04e21afa82ef024416f5413b5bdb66e0505bcd ]

The older sli4 adapters only supported the 64 byte WQE entry size.
The new adapter (fw) support both 64 and 128 byte WQE entry sizies.
The Express lane WQ was not being created with the 128 byte WQE sizes
when it was supported.

Not having the right WQE size created for the express lane work queue
caused the the firmware to overwrite the lun indentifier in the FCP header.

This patch correctly creates the express lane work queue with the
supported size.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix driver usage of 128B WQEs when WQ_CREATE is V1.

[ Upstream commit 3f247de750b8dd8f50a2c1390e2a1238790a9dff ]

There are two versions of a structure for queue creation and setup that the
driver shares with FW. The driver was only treating as version 0.

Verify WQ_CREATE with 128B WQEs in V0 and V1.

Code review of another bug showed the driver passing
128B WQEs and 8 pages in WQ CREATE and V0.
Code inspection/instrumentation showed that the driver
uses V0 in WQ_CREATE and if the caller passes queue->entry_size
128B, the driver sets the hdr_version to V1 so all is good.
When I tested the V1 WQ_CREATE, the mailbox failed causing
the driver to unload.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netvsc: Deal with rescinded channels correctly

[ Upstream commit 73e64fa4f417b22d8d5521999a631ced8e2d442e ]

We will not be able to send packets over a channel that has been
rescinded. Make necessary adjustments so we can properly cleanup
even when the channel is rescinded. This issue can be trigerred
in the NIC hot-remove path.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: Disable irq prior to close

[ Upstream commit dd9c20fa07ba5cfb5a0ab3181d68530506610605 ]

    Add some code to call disable_irq on all the vnic interface's irqs.
    This fixes a crash observed when closing an active interface, as
    seen in the oops below when we try to access a buffer in the interrupt
    handler which we've already freed.

    Unable to handle kernel paging request for data at address 0x00000001
    Faulting instruction address: 0xd000000003886824
    Oops: Kernel access of bad area, sig: 11 [#1]
    SMP NR_CPUS=2048 NUMA pSeries
    Modules linked in: ibmvnic(OEN) rpadlpar_io(X) rpaphp(X) tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_
    Supported: No, Unsupported modules are loaded
    CPU: 8 PID: 0 Comm: swapper/8 Tainted: G           OE   NX 4.4.49-92.11-default #1
    task: c00000007f990110 ti: c0000000fffa0000 task.ti: c00000007f9b8000
    NIP: d000000003886824 LR: d000000003886824 CTR: c0000000007eff60
    REGS: c0000000fffa3a70 TRAP: 0300   Tainted: G           OE   NX  (4.4.49-92.11-default)
    MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 22008042  XER: 20000008
    CFAR: c000000000008468 DAR: 0000000000000001 DSISR: 40000000 SOFTE: 0
    GPR00: d000000003886824 c0000000fffa3cf0 d000000003894118 0000000000000000
    GPR04: 0000000000000000 0000000000000000 c000000001249da0 0000000000000000
    GPR08: 000000000000000e 0000000000000000 c0000000ccb00000 d000000003889180
    GPR12: c0000000007eff60 c000000007af4c00 0000000000000001 c0000000010def30
    GPR16: c00000007f9b8000 c000000000b98c30 c00000007f9b8080 c000000000bab858
    GPR20: 0000000000000005 0000000000000000 c0000000ff5d7e80 c0000000f809f648
    GPR24: c0000000ff5d7ec8 0000000000000000 0000000000000000 c0000000ccb001a0
    GPR28: 000000000000000a c0000000f809f600 c0000000fd4cd900 c0000000f9cd5b00
    NIP [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic]
    LR [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic]
    Call Trace:
    [c0000000fffa3cf0] [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic] (unreliable)
    [c0000000fffa3dd0] [c000000000132940] __handle_irq_event_percpu+0x90/0x2e0
    [c0000000fffa3e90] [c000000000132bcc] handle_irq_event_percpu+0x3c/0x90
    [c0000000fffa3ed0] [c000000000132c88] handle_irq_event+0x68/0xc0
    [c0000000fffa3f00] [c000000000137edc] handle_fasteoi_irq+0xec/0x250
    [c0000000fffa3f30] [c000000000131b04] generic_handle_irq+0x54/0x80
    [c0000000fffa3f60] [c000000000011190] __do_irq+0x80/0x1d0
    [c0000000fffa3f90] [c0000000000248d8] call_do_irq+0x14/0x24
    [c00000007f9bb9e0] [c000000000011380] do_IRQ+0xa0/0x120
    [c00000007f9bba40] [c000000000002594] hardware_interrupt_common+0x114/0x180

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: Skylake: Uninitialized variable in probe_codec()

[ Upstream commit e6a33532affd14c12688c0e9b2e773e8b2550f3b ]

My static checker complains that if snd_hdac_bus_get_response() returns
-EIO then "res" is uninitialized.  Fix this by initializing it to -1 so
that the error is handled correctly.

Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Set correct SL in completion for RoCE

[ Upstream commit 12f8fedef2ec94c783f929126b20440a01512c14 ]

There is a difference when parsing a completion entry between Ethernet
and IB ports. When link layer is Ethernet the bits describe the type of
L3 header in the packet. In the case when link layer is Ethernet and VLAN
header is present the value of SL is equal to the 3 UP bits in the VLAN
header. If VLAN header is not present then the SL is undefined and consumer
of the completion should check if IB_WC_WITH_VLAN is set.

While that, this patch also fills the vlan_id field in the completion if
present.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Change vma from shared to private

[ Upstream commit 1377661298d2820d675553d186c31b6f46c140d0 ]

Anonymous VMA (->vm_ops == NULL) cannot be shared, otherwise
it would lead to SIGBUS.

Remove the shared flags from the vma after we change it to be
anonymous.

This is easily reproduced by doing modprobe -r while running a
user-space application such as raw_ethernet_bw.

Fixes: 7c2344c3bbf97 ('IB/mlx5: Implements disassociate_ucontext API')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Take write semaphore when changing the vma struct

[ Upstream commit ecc7d83be3243835c9396a1a2fb8ce95f205207b ]

When the driver disassociate user context, it changes the vma to
anonymous by setting the vm_ops to null and zap the vma ptes.

In order to avoid race in the kernel, we need to take write lock
before we change the vma entries.

Fixes: 7c2344c3bbf97 ('IB/mlx5: Implements disassociate_ucontext API')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Change vma from shared to private

[ Upstream commit ca37a664a8e4e9988b220988ceb4d79e3316f195 ]

Anonymous VMA (->vm_ops == NULL) cannot be shared, otherwise
it would lead to SIGBUS.

Remove the shared flags from the vma after we change it to be
anonymous.

This is easily reproduced by doing modprobe -r while running a
user-space application such as raw_ethernet_bw.

Fixes: ae184ddeca5db ('IB/mlx4_ib: Disassociate support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Take write semaphore when changing the vma struct

[ Upstream commit 22c3653d04bd0c67b75e99d85e0c0bdf83947df5 ]

When the driver disassociate user context, it changes the vma to
anonymous by setting the vm_ops to null and zap the vma ptes.

In order to avoid race in the kernel, we need to take write lock
before we change the vma entries.

Fixes: ae184ddeca5db ('IB/mlx4_ib: Disassociate support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HSI: ssi_protocol: double free in ssip_pn_xmit()

[ Upstream commit 3026050179a3a9a6f5c892c414b5e36ecf092081 ]

If skb_pad() fails then it frees skb and we don't need to free it again
at the end of the function.

Fixes: dc7bf5d7 ("HSI: Introduce driver for SSI Protocol")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipoib: Update broadcast object if PKey value was changed in index 0

[ Upstream commit 9a9b8112699d78e7f317019b37f377e90023f3ed ]

Update the broadcast address in the priv->broadcast object when the
Pkey value changes in index 0, otherwise the multicast GID value will
keep the previous value of the PKey, and will not be updated.
This leads to interface state down because the interface will keep the
old PKey value.

For example, in SR-IOV environment, if the PF changes the value of PKey
index 0 for one of the VFs, then the VF receives PKey change event that
triggers heavy flush. This flush calls update_parent_pkey that update the
broadcast object and its relevant members. If in this case the multicast
GID will not be updated, the interface state will be down.

Fixes: c2904141696e ("IPoIB: Fix pkey change flow for virtualization environments")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipoib: Fix deadlock between ipoib_stop and mcast join flow

[ Upstream commit 3e31a490e01a6e67cbe9f6e1df2f3ff0fbf48972 ]

Before calling ipoib_stop, rtnl_lock should be taken, then
the flow clears the IPOIB_FLAG_ADMIN_UP and IPOIB_FLAG_OPER_UP
flags, and waits for mcast completion if IPOIB_MCAST_FLAG_BUSY
is set.

On the other hand, the flow of multicast join task initializes
a mcast completion, sets the IPOIB_MCAST_FLAG_BUSY and calls
ipoib_mcast_join. If IPOIB_FLAG_OPER_UP flag is not set, this
call returns EINVAL without setting the mcast completion and
leads to a deadlock.

    ipoib_stop                          |
        |                               |
    clear_bit(IPOIB_FLAG_ADMIN_UP)      |
        |                               |
    Context Switch                      |
        |                       ipoib_mcast_join_task
        |                               |
        |                       spin_lock_irq(lock)
        |                               |
        |                       init_completion(mcast)
        |                               |
        |                       set_bit(IPOIB_MCAST_FLAG_BUSY)
        |                               |
        |                       Context Switch
        |                               |
    clear_bit(IPOIB_FLAG_OPER_UP)       |
        |                               |
    spin_lock_irqsave(lock)             |
        |                               |
    Context Switch                      |
        |                       ipoib_mcast_join
        |                       return (-EINVAL)
        |                               |
        |                       spin_unlock_irq(lock)
        |                               |
        |                       Context Switch
        |                               |
    ipoib_mcast_dev_flush               |
    wait_for_completion(mcast)          |

ipoib_stop will wait for mcast completion for ever, and will
not release the rtnl_lock. As a result panic occurs with the
following trace:

    [13441.639268] Call Trace:
    [13441.640150]  [<ffffffff8168b579>] schedule+0x29/0x70
    [13441.641038]  [<ffffffff81688fc9>] schedule_timeout+0x239/0x2d0
    [13441.641914]  [<ffffffff810bc017>] ? complete+0x47/0x50
    [13441.642765]  [<ffffffff810a690d>] ? flush_workqueue_prep_pwqs+0x16d/0x200
    [13441.643580]  [<ffffffff8168b956>] wait_for_completion+0x116/0x170
    [13441.644434]  [<ffffffff810c4ec0>] ? wake_up_state+0x20/0x20
    [13441.645293]  [<ffffffffa05af170>] ipoib_mcast_dev_flush+0x150/0x190 [ib_ipoib]
    [13441.646159]  [<ffffffffa05ac967>] ipoib_ib_dev_down+0x37/0x60 [ib_ipoib]
    [13441.647013]  [<ffffffffa05a4805>] ipoib_stop+0x75/0x150 [ib_ipoib]

Fixes: 08bc327629cb ("IB/ipoib: fix for rare multicast join race condition")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix headset microphone detection for ASUS N551 and N751

[ Upstream commit fc7438b1eb12b6c93d7b7a62423779eb5dfc673c ]

Headset microphone does not work out of the box on ASUS Nx51
laptops. This patch fixes it.

Patch tested on Asus N551 laptop. Asus N751 part is not tested, but
according to [1] this laptop uses the same audiosystem.

1. https://bugzilla.kernel.org/show_bug.cgi?id=117781

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195437
Signed-off-by: Mikhail Paulyshka <me@mixaill.tk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000e: fix timing for 82579 Gigabit Ethernet controller

[ Upstream commit 5313eeccd2d7f486be4e5c7560e3e2be239ec8f7 ]

After an upgrade to Linux kernel v4.x the hardware timestamps of the
82579 Gigabit Ethernet Controller are different than expected.
The values that are being read are almost four times as big as before
the kernel upgrade.

The difference is that after the upgrade the driver sets the clock
frequency to 25MHz, where before the upgrade it was set to 96MHz. Intel
confirmed that the correct frequency for this network adapter is 96MHz.

Signed-off-by: Bernd Faust <berndfaust@gmail.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: remove poll() flakes with FastOpen

[ Upstream commit 0f9fa831aecfc297b7b45d4f046759bcefcf87f0 ]

When using TCP FastOpen for an active session, we send one wakeup event
from tcp_finish_connect(), right before the data eventually contained in
the received SYNACK is queued to sk->sk_receive_queue.

This means that depending on machine load or luck, poll() users
might receive POLLOUT events instead of POLLIN|POLLOUT

To fix this, we need to move the call to sk->sk_state_change()
after the (optional) call to tcp_rcv_fastopen_synack()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix missing pg_cleanup after nfs_pageio_cond_complete()

[ Upstream commit 43b7d964ed30dbca5c83c90cb010985b429ec4f9 ]

Commit a7d42ddb3099727f58366fa006f850a219cce6c8 ("nfs: add mirroring
support to pgio layer") moved pg_cleanup out of the path when there was
non-sequental I/O that needed to be flushed.  The result is that for
layouts that have more than one layout segment per file, the pg_lseg is not
cleared, so we can end up hitting the WARN_ON_ONCE(req_start >= seg_end) in
pnfs_generic_pg_test since the pg_lseg will be pointing to that
previously-flushed layout segment.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: a7d42ddb3099 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid10: wait up frozen array in handle_write_completed

[ Upstream commit cf25ae78fc50010f66b9be945017796da34c434d ]

Since nr_queued is changed, we need to call wake_up here
if the array is already frozen and waiting for condition
"nr_pending == nr_queued + extra" to be true.

And commit 824e47daddbf ("RAID1: avoid unnecessary spin
locks in I/O barrier code") which has already added the
wake_up for raid1.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/omap: Register driver before setting IOMMU ops

[ Upstream commit abaa7e5b054aae567861628b74dbc7fbf8ed79e8 ]

Move the registration of the OMAP IOMMU platform driver before
setting the IOMMU callbacks on the platform bus. This causes
the IOMMU devices to be probed first before the .add_device()
callback is invoked for all registered devices, and allows
the iommu_group support to be added to the OMAP IOMMU driver.

While at this, also check for the return status from bus_set_iommu.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/mips-gic: Separate IPI reservation & usage tracking

[ Upstream commit f8dcd9e81797ae24acc44c84f0eb3b9e6cee9791 ]

Since commit 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy
domain") introduced the GIC IPI IRQ domain we have tracked both
reservation of interrupts & their use with a single bitmap - ipi_resrv.
If an interrupt is reserved for use as an IPI but not actually in use
then the appropriate bit is set in ipi_resrv. If an interrupt is either
not reserved for use as an IPI or has been allocated as one then the
appropriate bit is clear in ipi_resrv.

Unfortunately this means that checking whether a bit is set in ipi_resrv
to prevent IPI interrupts being allocated for use with a device is
broken, because if the interrupt has been allocated as an IPI first then
its bit will be clear.

Fix this by separating the tracking of IPI reservation & usage,
introducing a separate ipi_available bitmap for the latter. This means
that ipi_resrv will now always have bits set corresponding to all
interrupts reserved for use as IPIs, whether or not they have been
allocated yet, and therefore that checking it when allocating device
interrupts works as expected.

Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/1492679256-14513-2-git-send-email-matt.redfearn@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and !FRAME_POINTER

[ Upstream commit 6f05d0761af612e04572ba4d65b4c0274a88444f ]

The support for dynamic ftrace with CONFIG_DEBUG_RODATA involves
overriding the weak arch_ftrace_update_code() with a variant which makes
the kernel text writable around the patching.

This override was however added under the CONFIG_OLD_MCOUNT ifdef, and
CONFIG_OLD_MCOUNT is only enabled if frame pointers are enabled.

This leads to non-functional dynamic ftrace (ftrace triggers a
WARN_ON()) when CONFIG_DEBUG_RODATA is enabled and CONFIG_FRAME_POINTER
is not.

Move the override out of that ifdef and into the CONFIG_DYNAMIC_FTRACE
ifdef where it belongs.

Fixes: 80d6b0c2eed2a ("ARM: mm: allow text and rodata sections to be read-only")
Suggested-by: Nicolai Stange <nicstange@gmail.com>
Suggested-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Abel Vesa <abelvesa@gmail.com>
Acked-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/reboot: Turn off KVM when halting a CPU

[ Upstream commit fba4f472b33aa81ca1836f57d005455261e9126f ]

A CPU in VMX root mode will ignore INIT signals and will fail to bring
up the APs after reboot.  Therefore, on a panic we disable VMX on all
CPUs before rebooting or triggering kdump.

Do this when halting the machine as well, in case a firmware-level reboot
does not perform a cold reset for all processors.  Without doing this,
rebooting the host may hang.

Signed-off-by: Tiantian Feng <fengtiantian@huawei.com>
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
[ Rewritten commit message. ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/20170419161839.30550-1-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: don't leak 'chan_stats' on reset

[ Upstream commit fb9e67bee3ab7111513130c516ffe378d885c0d0 ]

'chan_stats' is (re)allocated in _mwifiex_fw_dpc() ->
mwifiex_init_channel_scan_gap(), which is called whenever the device is
initialized -- at probe or at reset.

But we only free it in we completely unregister the adapter, meaning we
leak a copy of it during every reset.

Let's free it in the shutdown / removal paths instead (and in the
error-handling path), to avoid the leak.

Ideally, we can eventually unify much of mwifiex_shutdown_sw() and
mwifiex_remove_card() (way too much copy-and-paste) to reduce the burden
on bugfixes like this. But that's work for tomorrow.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S PR: Exit KVM on failed mapping

[ Upstream commit bd9166ffe624000140fc6b606b256df01fc0d060 ]

At the moment kvmppc_mmu_map_page() returns -1 if
mmu_hash_ops.hpte_insert() fails for any reason so the page fault handler
resumes the guest and it faults on the same address again.

This adds distinction to kvmppc_mmu_map_page() to return -EIO if
mmu_hash_ops.hpte_insert() failed for a reason other than full pteg.
At the moment only pSeries_lpar_hpte_insert() returns -2 if
plpar_pte_enter() failed with a code other than H_PTEG_FULL.
Other mmu_hash_ops.hpte_insert() instances can only fail with
-1 "full pteg".

With this change, if PR KVM fails to update HPT, it can signal
the userspace about this instead of returning to guest and having
the very same page fault over and over again.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: virtio_scsi: Always try to read VPD pages

[ Upstream commit 25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0 ]

Passed through SCSI targets may have transfer limits which come from the
host SCSI controller or something on the host side other than the target
itself.

To make this work properly, the hypervisor can adjust the target's VPD
information to advertise these limits.  But for that to work, the guest
has to look at the VPD pages, which we won't do by default if it is an
SPC-2 device, even if it does actually support it.

This adds a workaround to address this, forcing devices attached to a
virtio-scsi controller to always check the VPD pages.  This is modelled
on a similar workaround for the storvsc (Hyper-V) SCSI controller,
although that exists for slightly different reasons.

A specific case which causes this is a volume from IBM's IPR RAID
controller (which presents as an SPC-2 device, although it does support
VPD) passed through with qemu's 'scsi-block' device.

[mkp: fixed typo]

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: a000: fix memory offsets and lengths

[ Upstream commit f4d1047914ea05e0f8393944da18f6ee5dad24c4 ]

Memory offsets and lengths for A000 HW is different
than currently specified.

Fixes: e34d975e40ff ("iwlwifi: Add a000 HW family support")
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: split the handler and the wake parts of the notification infra

[ Upstream commit 2220fb2960b72915e7fd9da640a4695dceff238c ]

The notification infrastructure (iwl_notification_wait_*
functions) allows to wait until a list of notifications
will come up from the firmware and to run a special handler
(notif_wait handler) when those are received.

The operation mode notifies the notification infrastructure
about any Rx being received by the mean of
iwl_notification_wait_notify() which will do two things:
1) call the notif_wait handler
2) wakeup the thread that was waiting for the notification

Typically, only after those two steps happened, the
operation mode will run its own handler for the notification
that was received from the firmware. This means that the
thread that was waiting for that notification can be
running before the operation mode's handler was called.

When the operation mode's handler is ASYNC, things get even
worse since the thread that was waiting for the
notification isn't even guaranteed that the ASYNC callback
was added to async_handlers_list before it starts to run.
This means that even calling
iwl_mvm_wait_for_async_handlers() can't guarantee that
absolutely everything related to that notification has run.
The following can happen:

Thread sending the command        Operation mode's Rx path
--------------------------        ------------------------
iwl_init_notification_wait()
iwl_mvm_send_cmd()
                                  iwl_mvm_rx_common()
                                  iwl_notification_wait_notify()
iwl_mvm_wait_for_async_handlers()
// Possibly free some data
// structure
                                  list_add_tail(async_handlers_list);
                                  schedule_work(async_handlers_wk);
                                  // Access the freed structure

Split the 'run notif_wait's handler' and the 'wake up the
thread' parts to fix this. This allows the operation mode
to do the following:

Thread sending the command        Operation mode's Rx path
--------------------------        ------------------------
iwl_init_notification_wait()
iwl_mvm_send_cmd()
                                  iwl_mvm_rx_common()
                                  iwl_notification_wait()
                                  // Will run the notif_wait's handler
                                  list_add_tail(async_handlers_list);
                                  schedule_work(async_handlers_wk);
                                  iwl_notification_notify()
iwl_mvm_wait_for_async_handlers()

This way, the waiter is guaranteed that all the handlers
have been run (if SYNC), or at least enqueued (if ASYNC)
by the time it wakes up.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: ns2: Correct SDIO bits

[ Upstream commit 8973aa4aecac223548366ca81818309a0f0efa6d ]

Corrected the bits for power and iso.

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: f7225a83 ("clk: ns2: add clock support for Broadcom Northstar 2 SoC")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath: Fix updating radar flags for coutry code India

[ Upstream commit c0c345d4cacc6a1f39d4856f37dcf6e34f51a5e4 ]

As per latest regulatory update for India, channel 52, 56, 60, 64
is no longer restricted to DFS. Enabling DFS/no infra flags in driver
results in applying all DFS related restrictions (like doing CAC etc
before this channel moves to 'available state') for these channels
even though the country code is programmed as 'India' in he hardware,
fix this by relaxing the frequency range while applying RADAR flags
only if the country code is programmed to India. If the frequency range
needs to modified based on different country code, ath_is_radar_freq
can be extended/modified dynamically.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: Remove SAO feature from Power9 DD1

[ Upstream commit ca80d5d0a8175c9be04cfbce24180b8f5e0a744b ]

Power9 DD1 does not implement SAO. Although it's not widely used, its presence
or absence is visible to user space via arch_validate_prot() so it's moderately
important that we get the value right.

Fixes: 7dccfbc325bb ("powerpc/book3s: Add a cpu table entry for different POWER9 revs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: dw: Disable clock after unregistering the host

[ Upstream commit 400c18e3dc86e04ef5afec9b86a8586ca629b9e9 ]

The dw_mmio driver disables the block clock before unregistering
the host. The code unregistering the host may access the SPI block
registers. If register access happens with block clock disabled,
this may lead to a bus hang. Disable the clock after unregistering
the host to prevent such situation.

This bug was observed on Altera Cyclone V SoC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/testing/nvdimm: fix nfit_test shutdown crash

[ Upstream commit 8b06b884cd98f7ec8b5028680b99fabfb7b3e192 ]

Keep the nfit_test instances alive until after nfit_test_teardown(), as
we may be doing resource lookups until the final un-registrations have
completed. This fixes crashes of the form.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
 IP: __release_resource+0x12/0x90
 Call Trace:
  remove_resource+0x23/0x40
  __wrap_remove_resource+0x29/0x30 [nfit_test_iomap]
  acpi_nfit_remove_resource+0xe/0x10 [nfit]
  devm_action_release+0xf/0x20
  release_nodes+0x16d/0x2b0
  devres_release_all+0x3c/0x60
  device_release+0x21/0x90
  kobject_release+0x6a/0x170
  kobject_put+0x2f/0x60
  put_device+0x17/0x20
  platform_device_unregister+0x20/0x30
  nfit_test_exit+0x36/0x960 [nfit_test]

Reported-by: Linda Knippers <linda.knippers@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: Atom: update Thinkpad 10 quirk

[ Upstream commit beb5989a8c6c6867b4e873cca2a66d31f977368f ]

There are multiple skews of the same Lenovo audio hardware
based on the Realtek RT5670 codec.

Manufacturer: LENOVO
        Product Name: 20C1CTO1WW
        Version: ThinkPad 10

Manufacturer: LENOVO
Product Name: 20C3001VHH
Version: ThinkPad 10

Manufacturer: LENOVO
Product Name: 20C10024GE
Version: ThinkPad Tablet B

Manufacturer: LENOVO
Product Name: 20359
Version: Lenovo Miix 2 10

For all these devices, the same quirk is used to force
the machine driver to be based on RT5670 instead of RT5640
as indicated by the BIOS.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691
Tested-by: Nicole Faerber <nicole.faerber@dpin.de>
Tested-by: Viacheslav Ostroukh <v.dev@ostroukh.me>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix a bogus warning when converting only data or metadata

[ Upstream commit 14506127979a5a3d0c5d9b4cc76ce9d4ec23b717 ]

If your filesystem has, eg, data:raid0 metadata:raid1, and you run "btrfs
balance -dconvert=raid1", the meta.target field will be uninitialized.
That's otherwise ok, as it's unused except for this warning.

Thus, let's use the existing set of raid levels for the comparison.

As a side effect, non-convert balances will now nag about data>metadata.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media/dvb-core: Race condition when writing to CAM

[ Upstream commit e7080d4471d805d921a9ea21b32f911a91e248cb ]

It started with a sporadic message in syslog: "CAM tried to send a
buffer larger than the ecount size" This message is not the fault
itself, but a consecutive fault, after a read error from the CAM. This
happens only on several CAMs, several hardware, and of course sporadic.

It is a consecutive fault, if the last read from the CAM did fail. I
guess this will not happen on all CAMs, but at least it did on mine.
There was a write error to the CAM and during the re-initialization
procedure, the CAM finished the last read, although it got a RS.

The write error to the CAM happened because a race condition between HC
write, checking DA and FR.

This patch added an additional check for DA(RE), just after checking FR.
It is important to read the CAMs status register again, to give the CAM
the necessary time for a proper reaction to HC. Please note the
description within the source code (patch below).

[mchehab@s-opensource.com: make checkpatch happy]

Signed-off-by: Jasmin jessich <jasmin@anw.at>
Tested-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv6: send unsolicited NA on admin up

[ Upstream commit 4a6e3c5def13c91adf2acc613837001f09af3baa ]

ndisc_notify is the ipv6 equivalent to arp_notify. When arp_notify is
set to 1, gratuitous arp requests are sent when the device is brought up.
The same is expected when ndisc_notify is set to 1 (per ndisc_notify in
Documentation/networking/ip-sysctl.txt). The NA is not sent on NETDEV_UP
event; add it.

Fixes: 5cb04436eef6 ("ipv6: add knob to send unsolicited ND on link-layer address change")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: i2c-scmi: add a MS HID

[ Upstream commit e058e7a4bc89104540a8a303682248614b5df6f1 ]

Description of the problem:
 - i2c-scmi driver contains only two identifiers "SMBUS01" and "SMBUSIBM";
 - the fist HID (SMBUS01) is clearly defined in "SMBus Control Method
   Interface Specification, version 1.0": "Each device must specify
   'SMBUS01' as its _HID and use a unique _UID value";
 - unfortunately, BIOS vendors (like AMI) seem to ignore this requirement
   and implement "SMB0001" HID instead of "SMBUS01";
 - I speculate that they do this because only "SMB0001" is hard coded in
   Windows SMBus driver produced by Microsoft.

This leads to following situation:
 - SMBus works out of box in Windows but not in Linux;
 - board vendors are forced to add correct "SMBUS01" HID to BIOS to make
   SMBus work in Linux. Moreover the same board vendors complain that
   tools (3-rd party ASL compiler) do not like the "SMBUS01" identifier
   and produce errors.  So they need to constantly patch the compiler for
   each new version of BIOS.

As it is very unlikely that BIOS vendors implement a correct HID in
future, I would propose to consider whether it is possible to work around
the problem by adding MS HID to the Linux i2c-scmi driver.

v2: move the definition of the new HID to the driver itself.

Signed-off-by: Edgar Cherkasov <echerkasov@dev.rtsoft.ru>
Signed-off-by: Michael Brunner <Michael.Brunner@kontron.com>
Acked-by: Viktor Krasnov <vkrasnov@dev.rtsoft.ru>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs

[ Upstream commit 382bd4de61827dbaaf5fb4fb7b1f4be4a86505e7 ]

When requesting a shared irq with IRQF_TRIGGER_NONE then the irqaction
flags get filled with the trigger type from the irq_data:

        if (!(new->flags & IRQF_TRIGGER_MASK))
                new->flags |= irqd_get_trigger_type(&desc->irq_data);

On the first setup_irq() the trigger type in irq_data is NONE when the
above code executes, then the irq is started up for the first time and
then the actual trigger type gets established, but that's too late to fix
up new->flags.

When then a second user of the irq requests the irq with IRQF_TRIGGER_NONE
its irqaction's triggertype gets set to the actual trigger type and the
following check fails:

        if (!((old->flags ^ new->flags) & IRQF_TRIGGER_MASK))

Resulting in the request_irq failing with -EBUSY even though both
users requested the irq with IRQF_SHARED | IRQF_TRIGGER_NONE

Fix this by comparing the new irqaction's trigger type to the trigger type
stored in the irq_data which correctly reflects the actual trigger type
being used for the irq.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20170415100831.17073-1-hdegoede@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>