OSDN Git Service
Michael Ellerman [Thu, 9 Feb 2017 12:55:43 +0000 (23:55 +1100)]
powerpc: Add a prototype for mcount() so it can be versioned
Currently we get a warning that _mcount() can't be versioned:
WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
Add a prototype to asm-prototypes.h to fix it.
The prototype is not really correct, mcount() is not a normal function,
it has a special ABI. But for the purpose of versioning it doesn't
matter.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Shailendra Singh [Wed, 1 Feb 2017 22:52:42 +0000 (14:52 -0800)]
powerpc: Drop GPL from of_node_to_nid() export to match other arches
The generic implementation of of_node_to_nid() is EXPORT_SYMBOL, added
in commit
298535c00a2c ("of, numa: Add NUMA of binding
implementation.").
The powerpc implementation added in commit
953039c8df7b ("[PATCH]
powerpc: Allow devices to register with numa topology") is
EXPORT_SYMBOL_GPL.
This creates an inconsistency for of_node_to_nid() callers across
architectures.
Update the powerpc implementation to be exported consistently with the
generic implementation.
Signed-off-by: Shailendra Singh <shailendras@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anju T [Wed, 8 Feb 2017 09:50:52 +0000 (15:20 +0530)]
powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()
Kprobe placed on the kretprobe_trampoline() during boot time can be
optimized, since the instruction at probe point is a 'nop'.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anju T [Wed, 8 Feb 2017 09:50:51 +0000 (15:20 +0530)]
powerpc/kprobes: Implement Optprobes
Current infrastructure of kprobe uses the unconditional trap instruction
to probe a running kernel. Optprobe allows kprobe to replace the trap
with a branch instruction to a detour buffer. Detour buffer contains
instructions to create an in memory pt_regs. Detour buffer also has a
call to optimized_callback() which in turn call the pre_handler(). After
the execution of the pre-handler, a call is made for instruction
emulation. The NIP is determined in advanced through dummy instruction
emulation and a branch instruction is created to the NIP at the end of
the trampoline.
To address the limitation of branch instruction in POWER architecture,
detour buffer slot is allocated from a reserved area. For the time
being, 64KB is reserved in memory for this purpose.
Instructions which can be emulated using analyse_instr() are the
candidates for optimization. Before optimization ensure that the address
range between the detour buffer allocated and the instruction being
probed is within +/- 32MB.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Naveen N. Rao [Wed, 8 Feb 2017 08:57:31 +0000 (14:27 +0530)]
powerpc/kprobes: Fixes for kprobe_lookup_name() on BE
Fix two issues with kprobes.h on BE which were exposed with the
optprobes work:
- one, having to do with a missing include for linux/module.h for
MODULE_NAME_LEN -- this didn't show up previously since the only
users of kprobe_lookup_name were in kprobes.c, which included
linux/module.h through other headers, and
- two, with a missing const qualifier for a local variable which ends
up referring a string literal. Again, this is unique to how
kprobe_lookup_name is being invoked in optprobes.c
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anju T [Wed, 8 Feb 2017 08:57:30 +0000 (14:27 +0530)]
powerpc: Add helper to check if offset is within relative branch range
To permit the use of relative branch instruction in powerpc, the target
address has to be relatively nearby, since the address is specified in an
immediate field (24 bit filed) in the instruction opcode itself. Here
nearby refers to 32MB on either side of the current instruction.
This patch verifies whether the target address is within +/- 32MB
range or not.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Naveen N. Rao [Wed, 8 Feb 2017 08:57:29 +0000 (14:27 +0530)]
powerpc/bpf: Introduce __PPC_SH64()
Introduce __PPC_SH64() as a 64-bit variant to encode shift field in some
of the shift and rotate instructions operating on double-words. Convert
some of the BPF instruction macros to use the same.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
David Gibson [Fri, 9 Dec 2016 00:07:38 +0000 (11:07 +1100)]
powerpc/pseries: Automatically resize HPT for memory hot add/remove
We've now implemented code in the pseries platform to use the new PAPR
interface to allow resizing the hash page table (HPT) at runtime.
This patch uses that interface to automatically attempt to resize the HPT
when memory is hot added or removed. This tries to always keep the HPT at
a reasonable size for our current memory size.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
David Gibson [Fri, 9 Dec 2016 00:07:37 +0000 (11:07 +1100)]
powerpc/pseries: Advertise HPT resizing support via CAS
The hypervisor needs to know a guest is capable of using the HPT resizing
PAPR extension in order to make full advantage of it for memory hotplug.
If the hypervisor knows the guest is HPT resize aware, it can size the
initial HPT based on the initial guest RAM size, relying on the guest to
resize the HPT when more memory is hot-added. Without this, the hypervisor
must size the HPT for the maximum possible guest RAM, which can lead to
a huge waste of space if the guest never actually expends to that maximum
size.
This patch advertises the guest's support for HPT resizing via the
ibm,client-architecture-support OF interface. We use bit 5 of byte 6 of
option vector 5 for this purpose, as defined in the PAPR ACR "HPT
resizing option".
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
David Gibson [Fri, 9 Dec 2016 00:07:36 +0000 (11:07 +1100)]
powerpc/pseries: Add support for hash table resizing
This adds support for using two hypercalls to change the size of the
main hash page table while running as a PAPR guest. For now these
hypercalls are only in experimental qemu versions.
The interface is two part: first H_RESIZE_HPT_PREPARE is used to
allocate and prepare the new hash table. This may be slow, but can be
done asynchronously. Then, H_RESIZE_HPT_COMMIT is used to switch to the
new hash table. This requires that no CPUs be concurrently updating the
HPT, and so must be run under stop_machine().
This also adds a debugfs file which can be used to manually control
HPT resizing or testing purposes.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Paul Mackerras <paulus@samba.org>
[mpe: Rename the debugfs file to "hpt_order"]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
David Gibson [Fri, 9 Dec 2016 00:07:35 +0000 (11:07 +1100)]
powerpc/pseries: Add hypercall wrappers for hash page table resizing
This adds the hypercall numbers and wrapper functions for the hash page
table resizing hypercalls.
These hypercall numbers are defined in the PAPR ACR "HPT resizing
option".
It also adds a new firmware feature flag to track the presence of the
HPT resizing calls.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Chris Packham [Fri, 3 Feb 2017 00:43:16 +0000 (13:43 +1300)]
Documentation: powerpc/fsl: Update compatible for l2cache binding
List all the current valid compatible strings for the l2cache binding.
This should stop checkpatch.pl from complaining and will hopefully save
someone from having to debug a typo in their dts.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Tue, 7 Feb 2017 00:37:28 +0000 (11:37 +1100)]
powerpc/opal-lpc: Remove unneeded include
We don't need asm/xics.h
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Mon, 6 Feb 2017 05:07:36 +0000 (16:07 +1100)]
powerpc/opal-irqchip: Use interrupt names if present
Recent versions of OPAL can provide names for the various OPAL interrupts,
so let's use them. This also modernises the code that fetches the
interrupt array to use the helpers provided by the generic code instead
of hand-parsing the property.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Free irqs on error, check allocation of names, consolidate error
handling, whitespace.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Mahesh Salgaonkar [Wed, 16 Nov 2016 05:28:02 +0000 (10:58 +0530)]
powerpc/powernv: Display the correct error info for CAPP errors.
On some CAPP errors we see console messages that prints unknown HMIs for
which CAPI recovery is in progress. This patch fixes this by printing
correct error info for HMI generated due to CAPP recovery.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Neuling [Mon, 6 Feb 2017 02:55:43 +0000 (13:55 +1100)]
powerpc/powernv: Add XHCI and USB storage to defconfig
These are common on bare metal machines, so put them in the defconfig.
This adds 216KB to the vmlinux size
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Naveen N. Rao [Tue, 7 Feb 2017 18:06:41 +0000 (23:36 +0530)]
powerpc/64: Include bpf/bcc related config options in defconfigs
Specifically:
- CONFIG_BPF_SYSCALL
- CONFIG_NET_SCHED
- CONFIG_NET_CLS_BPF
- CONFIG_NET_CLS_ACT
- CONFIG_NET_ACT_BPF
- CONFIG_CGROUP_BPF
- CONFIG_UPROBE_EVENT
... in pseries, ppc64 and powernv defconfigs.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Finn Thain [Sun, 1 Jan 2017 00:56:26 +0000 (19:56 -0500)]
m68k/mac: Replace via-maciisi driver with via-cuda driver
Change the device probe test in the via-cuda.c driver so it will load on
Egret-based machines too. Remove the now redundant via-maciisi.c driver.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Finn Thain [Sun, 1 Jan 2017 00:56:26 +0000 (19:56 -0500)]
via-cuda: Add support for Egret system controller
The Egret system controller was the predecessor to the Cuda and the
differences are minor.
On Cuda, byte acknowledgement requires one transition of the TACK
signal; on Egret two are needed. On Cuda, TIP is active low; on Egret
it is active high. And Cuda raises certain interrupts that Egret omits.
Accomodating these differences complicates the Cuda driver slightly
but avoids a lot of duplication (see next patch).
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Finn Thain [Sun, 1 Jan 2017 00:56:26 +0000 (19:56 -0500)]
via-cuda: Initialize data_index early and increment consistently
Initialize data_index where appropriate to improve readability and
assist debugging. This change doesn't affect driver behaviour.
I prefer to see
current_req->data[data_index++]
in place of
current_req->data[0]
or
current_req->data[1]
inasmuchas it becomes obvious what the data_index variable does.
Moreover, the actual value of data_index when examined at any given moment
tells me something about prior events, which did prove helpful.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Finn Thain [Sun, 1 Jan 2017 00:56:26 +0000 (19:56 -0500)]
via-cuda: Use spinlock_irq_save/restore instead of enable/disable_irq
The cuda_start() function uses spinlock_irq_save/restore for mutual
exclusion. Let's have cuda_poll() do the same when polling the VIA
interrupt.
The benefit to disabling local irqs when the interrupt is being polled
is that the interrupt handler now has the same timing properties
regardless of whether it is invoked normally or from cuda_poll().
This driver was written back when local irqs remained enabled during
execution of interrupt handlers and cuda_poll() was probably trying
to achieve the same effect by use of enable/disable_irq.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Finn Thain [Sun, 1 Jan 2017 00:56:26 +0000 (19:56 -0500)]
via-cuda: Avoid TREQ race condition
When a read transaction completes, one of several things will happen:
a new transfer is started by the driver, a new transfer request
is raised by the Cuda (i.e. TREQ asserted), or both happen at once.
When both happen at once, there is a race condition between the TREQ test
in the read_done state and the same test in cuda_start(). Moreover, the
former test uses a stale TREQ value.
Theoretically, this can result in the undesirable outcome that the
interrupt handler completes with the state machine 'idle' when it should
instead start the next transaction.
Avoid this race by calling cuda_start() first and then confirming that it
succeeded. If not, test the current TREQ value before entering the
'reading' state.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Finn Thain [Sun, 1 Jan 2017 00:56:26 +0000 (19:56 -0500)]
via-cuda: Fix re-initialization of reply_ptr and reading_reply
When reading_reply is set, reply_ptr points into an adb_request struct.
Conversely, when reply_ptr instead points into the global cuda_rbuf,
reading_reply must be false.
Unfortunately, this rule can be violated because re-initialization
of reply_ptr and reading_reply presently depends on the TREQ input.
Fix this by re-initializing reply_ptr and reading_reply as soon as they
are known to be invalid.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Finn Thain [Sun, 1 Jan 2017 00:56:26 +0000 (19:56 -0500)]
via-cuda: Prevent read buffer overflow
If the Cuda driver does not enter the 'read_done' state for some
reason, it may continue in the 'reading' state until the buffer
overflows. Add a bounds check to prevent this.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Finn Thain [Sun, 1 Jan 2017 00:56:26 +0000 (19:56 -0500)]
via-cuda: Add TREQ, TIP and TACK signal helpers
Introduce some helpers for handling the signalling between VIA and
Cuda. This abstraction will be used to add support for Egret devices,
which utilize slightly different signalling.
Don't invert the sense of the Cuda's active-low signals when storing
them in the 'status' variable. Just assert, negate and test those
signals using the helpers.
The state machine does not need to test its own output signals to
figure out what to do next: the next state depends on the Cuda's TREQ
output. Just call the TREQ_asserted() helper function to test for that.
Similarly, there is no need to store pin directions in the 'status'
variable. That was only useful for debugging messages.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Finn Thain [Sun, 1 Jan 2017 00:56:26 +0000 (19:56 -0500)]
via-cuda: Remove redundant temporary variable
There is no possibility that current_req can change during execution of
cuda_start(). This can be confirmed by inspection: cuda_lock is always
held whenever cuda_start() is called or current_req is modified.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Finn Thain [Sun, 1 Jan 2017 00:56:26 +0000 (19:56 -0500)]
via-cuda: Cleanup printk calls
Add missing log message severity, remove old debug messages and
replace printk() loop with print_hex_dump() call.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Mon, 6 Feb 2017 18:39:27 +0000 (00:09 +0530)]
powerpc/mm: Add MMU_FTR_KERNEL_RO to possible feature mask
Without this we will always find the feature disabled.
Fixes:
984d7a1ec6 ("powerpc/mm: Fixup kernel read only mapping")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Tue, 6 Dec 2016 01:41:12 +0000 (11:41 +1000)]
powerpc/64s: Use (start, size) rather than (start, end) for exception handlers
start,size has the benefit of being easier to search for (start,end
usually gives you the preceeding vector from the one you want, as first
result).
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Tue, 6 Dec 2016 01:40:15 +0000 (11:40 +1000)]
powerpc/64s: Tidy up after exception handler rework
Somewhere along the line, search/replace left some naming garbled,
and untidy alignment (aka. mpe stuffed it up). Might as well fix them
all up now while git blame history doesn't extend too far.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Fri, 3 Feb 2017 06:20:07 +0000 (17:20 +1100)]
powerpc: Add new cache geometry aux vectors
This adds AUX vectors for the L1I,D, L2 and L3 cache levels
providing for each cache level the size of the cache in bytes
and the geometry (line size and number of ways).
We chose to not use the existing alpha/sh definition which
packs all the information in a single entry per cache level as
it is too restricted to represent some of the geometries used
on POWER.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Sun, 8 Jan 2017 23:31:49 +0000 (17:31 -0600)]
powerpc/64: Hard code cache geometry on POWER8
All shipping firmware versions have it wrong in the device-tree
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Sun, 8 Jan 2017 23:31:48 +0000 (17:31 -0600)]
powerpc/64: Add L2 and L3 cache shape info
Retrieved from device-tree when available
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Sun, 8 Jan 2017 23:31:47 +0000 (17:31 -0600)]
powerpc/64: Clean up ppc64_caches using a struct per cache
We have two set of identical struct members for the I and D sides
and mostly identical bunches of code to parse the device-tree to
populate them. Instead make a ppc_cache_info structure with one
copy for I and one for D
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Sun, 8 Jan 2017 23:31:46 +0000 (17:31 -0600)]
powerpc/64: Retrieve number of L1 cache sets from device-tree
It will be used to calculate the associativity
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Sun, 8 Jan 2017 23:31:45 +0000 (17:31 -0600)]
powerpc/64: Fix naming of cache block vs. cache line
In a number of places we called "cache line size" what is actually
the cache block size, which in the powerpc architecture, means the
effective size to use with cache management instructions (it can
be different from the actual cache line size).
We fix the naming across the board and properly retrieve both
pieces of information when available in the device-tree.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Sun, 8 Jan 2017 23:31:44 +0000 (17:31 -0600)]
powerpc: Remove obsolete comment about patching instructions
We don't patch instructions based on the cache lines or block
sizes these days.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Sun, 8 Jan 2017 23:31:43 +0000 (17:31 -0600)]
powerpc: Move {d,i,u}cache_bsize definitions to a common place
The variables are defined twice in setup_32.c and setup_64.c, do it
once in setup-common.c instead
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Sun, 8 Jan 2017 23:31:42 +0000 (17:31 -0600)]
powerpc: Move ARCH_DLINFO out of uapi
It's an kernel private macro, it doesn't belong there
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrew Donnellan [Tue, 6 Dec 2016 06:28:00 +0000 (17:28 +1100)]
powerpc: Enable support for GCC plugins
Enable support for GCC plugins on powerpc.
Add an additional version check in gcc-plugins-check to advise users to
upgrade to gcc 5.2+ on powerpc to avoid issues with header files (gcc <=
4.6) or missing copies of rs6000-cpus.def (4.8 to 5.1 on 64-bit
targets).
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrew Donnellan [Tue, 6 Dec 2016 06:27:59 +0000 (17:27 +1100)]
powerpc: Correctly disable latent entropy GCC plugin on prom_init.o
Commit
38addce8b600 ("gcc-plugins: Add latent_entropy plugin") excludes
certain powerpc early boot code from the latent entropy plugin by adding
appropriate CFLAGS. It looks like this was supposed to cover
prom_init.o, but ended up saying init.o (which doesn't exist) instead.
Fix the typo.
Fixes:
38addce8b600 ("gcc-plugins: Add latent_entropy plugin")
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrew Donnellan [Tue, 6 Dec 2016 06:27:58 +0000 (17:27 +1100)]
gcc-plugins: Fix definition of DISABLE_LATENT_ENTROPY_PLUGIN
The variable DISABLE_LATENT_ENTROPY_PLUGIN is defined when
CONFIG_PAX_LATENT_ENTROPY is set. This is leftover from the original PaX
version of the plugin code and doesn't actually exist. Change the condition
to depend on CONFIG_GCC_PLUGIN_LATENT_ENTROPY instead.
Fixes:
38addce8b600 ("gcc-plugins: Add latent_entropy plugin")
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrew Donnellan [Wed, 1 Feb 2017 03:22:07 +0000 (14:22 +1100)]
cxl: Fix build when CONFIG_DEBUG_FS=n
Stub out the debugfs functions so that the build doesn't break when
CONFIG_DEBUG_FS=n.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nathan Fontenot [Wed, 11 Jan 2017 17:00:58 +0000 (12:00 -0500)]
powerpc/pseries: Report DLPAR capabilities
As we add the ability to do DLPAR of additional devices through
the sysfs interface we need to know which devices are supported.
This adds the reporting of supported devices with a comma separated
list reported in the existing /sys/kernel/dlpar.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
John Allen [Fri, 6 Jan 2017 19:28:54 +0000 (13:28 -0600)]
powerpc/pseries: Update affinity for memory and cpus specified in a PRRN event
Extend the existing PRRN infrastructure to perform the actual affinity
updating for cpus and memory in addition to the device tree updating.
For cpus, dynamic affinity updating already appears to exist in the
kernel in the form of arch_update_cpu_topology(). For memory, we must
place a READD operation on the hotplug queue for any phandle included in
the PRRN event that is determined to be an LMB.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
John Allen [Fri, 6 Jan 2017 19:27:26 +0000 (13:27 -0600)]
powerpc/pseries: Introduce memory hotplug READD operation
Currently, memory must be hot removed and subsequently re-added in order
to dynamically update the affinity of LMBs specified by a PRRN event.
Earlier implementations of the PRRN event handler ran into issues in which
the hot remove would occur successfully, but a hotplug event would be
initiated from another source and grab the hotplug lock preventing the hot
add from occurring. To prevent this situation, this patch introduces the
notion of a hot "readd" action for memory which atomizes a hot remove and
a hot add into a single, serialized operation on the hotplug queue.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
John Allen [Fri, 6 Jan 2017 19:25:53 +0000 (13:25 -0600)]
powerpc/pseries: Make the acquire/release of the drc for memory a seperate step
When adding and removing LMBs we should make the acquire/release of
the DRC a separate step to allow for a few improvements. First
this will ensure that LMBs removed during a remove by count operation
are all available if a error occurs and we need to add them back. By
first removeing all the LMBs from the kernel before releasing their
DRCs the LMBs are available to add back should an error occur.
Also, this will allow for faster re-add operations of memory for
PRRN event handling since we can skip the unneeded step of having
to release the DRC and the acquire it back.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Madhavan Srinivasan [Thu, 5 Jan 2017 11:08:15 +0000 (16:38 +0530)]
powerpc/xmon: Cleanup to use is_kernel_addr macro
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 1 Feb 2017 05:59:35 +0000 (16:59 +1100)]
powerpc/boot: Update .gitignore
Add a few things that have been missed from .gitignore over the years.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 1 Feb 2017 02:21:22 +0000 (13:21 +1100)]
powerpc/debug: PTDUMP should depend on DEBUG_FS
CONFIG_PPC_PTDUMP currently selects CONFIG_DEBUG_FS. But CONFIG_DEBUG_FS
is user-selectable, so we shouldn't select it. Instead depend on it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Thu, 12 Jan 2017 10:17:34 +0000 (21:17 +1100)]
powerpc/64: Add BPF_JIT to powernv and pseries defconfigs
Commit
db9112173b18 ("powerpc: Turn on BPF_JIT in ppc64_defconfig")
only added BPF_JIT to the ppc64 defconfig. Add it to our powernv
and pseries defconfigs too.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Thu, 12 Jan 2017 10:17:33 +0000 (21:17 +1100)]
powerpc/64: Move HAVE_CONTEXT_TRACKING from pseries to common Kconfig
We added support for HAVE_CONTEXT_TRACKING, but placed the option inside
PPC_PSERIES.
This has the undesirable effect that NO_HZ_FULL can be enabled on a
kernel with both powernv and pseries support, but cannot on a kernel
with powernv only support.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Daniel Axtens [Mon, 30 Jan 2017 06:41:55 +0000 (17:41 +1100)]
powerpc/sparse: Constify the address pointer in __get_user_nosleep()
In __get_user_nosleep, we create an intermediate pointer for the
user address we're about to fetch. We currently don't tag this
pointer as const. Make it const, as we are simply dereferencing
it, and it's scope is limited to the __get_user_nosleep macro.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Daniel Axtens [Mon, 30 Jan 2017 06:41:54 +0000 (17:41 +1100)]
powerpc/sparse: Constify the address pointer in __get_user_nocheck()
In __get_user_nocheck, we create an intermediate pointer for the
user address we're about to fetch. We currently don't tag this
pointer as const. Make it const, as we are simply dereferencing
it, and it's scope is limited to the __get_user_nocheck macro.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Daniel Axtens [Mon, 30 Jan 2017 06:41:53 +0000 (17:41 +1100)]
powerpc/sparse: Constify the address pointer in __get_user_check()
In __get_user_check, we create an intermediate pointer for the
user address we're about to fetch. We currently don't tag this
pointer as const. Make it const, as we are simply dereferencing
it, and it's scope is limited to the __get_user_check macro.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Thu, 2 Feb 2017 05:21:44 +0000 (16:21 +1100)]
powerpc/powernv: Fix section mismatch from opal_lpc_init()
opal_lpc_init() is called from an __init routine, and calls other __init
routines, so should also be __init, init?
Fixes:
023b13a50183 ("powerpc/powernv: Add support for direct mapped LPC on POWER9")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reza Arbab [Mon, 16 Jan 2017 19:07:46 +0000 (13:07 -0600)]
powerpc/mm: unstub radix__vmemmap_remove_mapping()
Use remove_pagetable() and friends for radix vmemmap removal.
We do not require the special-case handling of vmemmap done in the x86
versions of these functions. This is because vmemmap_free() has already
freed the mapped pages, and calls us with an aligned address range.
So, add a few failsafe WARNs, but otherwise the code to remove physical
mappings is already sufficient for vmemmap.
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reza Arbab [Mon, 16 Jan 2017 19:07:45 +0000 (13:07 -0600)]
powerpc/mm: add radix__remove_section_mapping()
Tear down and free the four-level page tables of physical mappings
during memory hotremove.
Borrow the basic structure of remove_pagetable() and friends from the
identically-named x86 functions. Reduce the frequency of tlb flushes and
page_table_lock spinlocks by only doing them in the outermost function.
There was some question as to whether the locking is needed at all.
Leave it for now, but we could consider dropping it.
Memory must be offline to be removed, thus not in use. So there
shouldn't be the sort of concurrent page walking activity here that
might prompt us to use RCU.
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reza Arbab [Mon, 16 Jan 2017 19:07:44 +0000 (13:07 -0600)]
powerpc/mm: add radix__create_section_mapping()
Wire up memory hotplug page mapping for radix. Share the mapping
function already used by radix_init_pgtable().
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reza Arbab [Mon, 16 Jan 2017 19:07:43 +0000 (13:07 -0600)]
powerpc/mm: refactor radix physical page mapping
Move the page mapping code in radix_init_pgtable() into a separate
function that will also be used for memory hotplug.
The current goto loop progressively decreases its mapping size as it
covers the tail of a range whose end is unaligned. Change this to a for
loop which can do the same for both ends of the range.
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Mon, 30 Jan 2017 07:11:57 +0000 (18:11 +1100)]
powerpc/powernv: Add support for direct mapped LPC on POWER9
Use the new non-PCI ISA bridge support to expose the POWER9
LPC bus as direct mapped via the ISA IO port range. This
enables direct access via drivers such as 8250
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Mon, 30 Jan 2017 07:11:56 +0000 (18:11 +1100)]
powerpc: Add support for non-PCI ISA bridges
The POWER9 chip supports an LPC bus that isn't hanging
off a PCI bus, so let's add support for that, mapping it
to the reserved space at ISA_IO_BASE
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Mon, 30 Jan 2017 07:11:55 +0000 (18:11 +1100)]
powerpc: Move isa bridge definitions to separate include
We'll be adding non-PCI isa bridge support so let's not
have all the definition in pci-bridge.h
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gautham R. Shenoy [Wed, 25 Jan 2017 08:36:29 +0000 (14:06 +0530)]
Documentation:powerpc: Add device-tree bindings for power-mgt
Document the device-tree bindings defining the the properties under
the @power-mgt node in the device tree that describe the idle states
for Linux running on baremetal POWER servers.
These bindings are documented separately instead of using the the
common idle state bindings since the idle-states on POWER servers
are exposed as property arrays where as the common idle state bindings
expect idle-states to be described as nodes.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gautham R. Shenoy [Wed, 25 Jan 2017 08:36:28 +0000 (14:06 +0530)]
powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gautham R. Shenoy [Wed, 25 Jan 2017 08:36:27 +0000 (14:06 +0530)]
cpuidle:powernv: Add helper function to populate powernv idle states.
In the current code for powernv_add_idle_states, there is a lot of code
duplication while initializing an idle state in powernv_states table.
Add an inline helper function to populate the powernv_states[] table
for a given idle state. Invoke this for populating the "Nap",
"Fastsleep" and the stop states in powernv_add_idle_states.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gautham R. Shenoy [Wed, 25 Jan 2017 08:36:26 +0000 (14:06 +0530)]
powernv:stop: Rename pnv_arch300_idle_init to pnv_power9_idle_init
Balbir pointed out that the name of the function pnv_arch300_idle_init
was inconsistent with the names of the variables and functions
pertaining to POWER9 features in book3s_idle.S.
This patch renames pnv_arch300_idle_init to pnv_power9_idle_init.
This patch does not change any behaviour.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gautham R. Shenoy [Wed, 25 Jan 2017 08:36:25 +0000 (14:06 +0530)]
powernv:idle: Add IDLE_STATE_ENTER_SEQ_NORET macro
Currently all the low-power idle states are expected to wake up
at reset vector 0x100. Which is why the macro IDLE_STATE_ENTER_SEQ
that puts the CPU to an idle state and never returns.
On ISA v3.0, when the ESL and EC bits in the PSSCR are zero, the CPU
is expected to wake up at the next instruction of the idle
instruction.
This patch adds a new macro named IDLE_STATE_ENTER_SEQ_NORET for the
no-return variant and reuses the name IDLE_STATE_ENTER_SEQ
for a variant that allows resuming operation at the instruction next
to the idle-instruction.
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Alistair Popple [Tue, 10 Jan 2017 04:41:44 +0000 (15:41 +1100)]
powerpc/powernv: Use OPAL call for TCE kill on NVLink2
Add detection of NPU2 PHBs. NPU2/NVLink2 has a different register
layout for the TCE kill register therefore TCE invalidation should be
done via the OPAL call rather than using the register directly as it
is for PHB3 and NVLink1. This changes TCE invalidation to use the OPAL
call in the case of a NPU2 PHB model.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Alistair Popple [Wed, 14 Dec 2016 02:36:51 +0000 (13:36 +1100)]
powerpc/powernv: Initialise nest mmu
POWER9 contains an off core mmu called the nest mmu (NMMU). This is
used by other hardware units on the chip to translate virtual
addresses into real addresses. The unit attempting an address
translation provides the majority of the context required for the
translation request except for the base address of the partition table
(ie. the PTCR) which needs to be programmed into the NMMU.
This patch adds a call to OPAL to set the PTCR for the nest mmu in
opal_init().
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reza Arbab [Wed, 16 Nov 2016 16:45:03 +0000 (10:45 -0600)]
powerpc/mm: Allow memory hotplug into an offline node
Relax the check preventing us from hotplugging into an offline node.
This limitation was added in commit
482ec7c403d2 ("[PATCH] powerpc numa:
Support sparse online node map") to prevent adding resources to an
uninitialized node.
These days, there is no harm in doing so. The addition will actually
cause the node to be initialized and onlined; add_memory_resource()
calls hotadd_new_pgdat() (if necessary) and node_set_online().
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reza Arbab [Thu, 13 Oct 2016 18:45:30 +0000 (13:45 -0500)]
powerpc/mm: Simplify loop control in parse_numa_properties()
The flow of the main loop in parse_numa_properties() is overly
complicated. Simplify it to be less confusing and easier to read.
No functional change.
The end of the main loop in parse_numa_properties() looks like this:
for_each_node_by_type(...) {
...
if (!condition) {
if (--ranges)
goto new_range;
else
continue;
}
statement();
if (--ranges)
goto new_range;
/* else
* continue; <- implicit, this is the end of the loop
*/
}
The only effect of !condition is to skip execution of statement(). This
can be rewritten in a simpler way:
for_each_node_by_type(...) {
...
if (condition)
statement();
if (--ranges)
goto new_range;
}
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Mahesh Salgaonkar [Mon, 24 Oct 2016 18:21:51 +0000 (23:51 +0530)]
powerpc/fadump: Fix the race in crash_fadump().
There are chances that multiple CPUs can call crash_fadump() simultaneously
and would start duplicating same info to vmcoreinfo ELF note section. This
causes makedumpfile to fail during kdump capture. One example is,
triggering dumprestart from HMC which sends system reset to all the CPUs at
once.
makedumpfile --dump-dmesg /proc/vmcore
read_vmcoreinfo_basic_info: Invalid data in /tmp/vmcoreinfoyjgxlL: CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=
1475605971
makedumpfile Failed.
Running makedumpfile --dump-dmesg /proc/vmcore failed (1).
makedumpfile -d 31 -l /proc/vmcore
read_vmcoreinfo_basic_info: Invalid data in /tmp/vmcoreinfo1mmVdO: CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=
1475605971
makedumpfile Failed.
Running makedumpfile -d 31 -l /proc/vmcore failed (1).
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Sat, 28 Jan 2017 15:48:40 +0000 (21:18 +0530)]
powerpc/mm/hash: Properly mask the ESID bits when building proto VSID
The proto VSID is built using both the MMU context id and effective
segment ID (ESID). We should not have overlapping bits between those.
That could result in us having a VSID collision. With the current code
we missed masking the top bits of the ESID. This implies for kernel
address we ended up using the top 4 bits of the ESID as part of the
proto VSID, which is wrong.
The current code use the top 4 context values (0x7fffc - 0x7ffff) for
the kernel. With those context IDs used for the kernel, we don't run
into VSID collisions because we get the same proto VSID irrespective of
whether we mask the ESID bits or not. eg:
ea = 0xf000000000000000
context = 0x7ffff
w/out masking:
proto_vsid = (0x7ffff << 6 | 0xf000000000000000 >> 40)
= (0x1ffffc0 | 0xf00000)
= 0x1ffffc0
with masking:
proto_vsid = (0x7ffff << 6 | ((0xf000000000000000 >> 40) & 0x3f))
= (0x1ffffc0 | (0xf00000 & 0x3f))
= 0x1ffffc0 | 0)
= 0x1ffffc0
So although there is no bug, the code is still overly subtle, so fix it
to save ourselves pain in future.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Naveen N. Rao [Fri, 13 Jan 2017 17:10:01 +0000 (22:40 +0530)]
powerpc/bpf: Flush the entire JIT buffer
With bpf_jit_binary_alloc(), we allocate at a page granularity and fill
the rest of the space with illegal instructions to mitigate BPF spraying
attacks, while having the actual JIT'ed BPF program at a random location
within the allocated space. Under this scenario, it would be better to
flush the entire allocated buffer rather than just the part containing
the actual program. We already flush the buffer from start to the end of
the BPF program. Extend this to include the illegal instructions after
the BPF program.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Daniel Borkmann [Fri, 13 Jan 2017 17:10:00 +0000 (22:40 +0530)]
powerpc/bpf: Remove redundant check for non-null image
We have a check earlier to ensure we don't proceed if image is NULL. As
such, the redundant check can be removed.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
[Added similar changes for classic BPF JIT]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrew Donnellan [Fri, 9 Dec 2016 06:18:50 +0000 (17:18 +1100)]
cxl: Prevent read/write to AFU config space while AFU not configured
During EEH recovery, we deconfigure all AFUs whilst leaving the
corresponding vPHB and virtual PCI device in place.
If something attempts to interact with the AFU's PCI config space (e.g.
running lspci) after the AFU has been deconfigured and before it's
reconfigured, cxl_pcie_{read,write}_config() will read invalid values from
the deconfigured struct cxl_afu and proceed to Oops when they try to
dereference pointers that have been set to NULL during deconfiguration.
Add a rwsem to struct cxl_afu so we can prevent interaction with config
space while the AFU is deconfigured.
Reported-by: Pradipta Ghosh <pradghos@in.ibm.com>
Suggested-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Vaibhav Jain [Wed, 4 Jan 2017 06:18:52 +0000 (11:48 +0530)]
cxl: Force psl data-cache flush during device shutdown
This change adds a force psl data cache flush during device shutdown
callback. This should reduce a possibility of psl holding a dirty
cache line while the CAPP is being reinitialized, which may result in
a UE [load/store] machine check error.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Greg Kurz [Thu, 19 Jan 2017 10:50:10 +0000 (11:50 +0100)]
cxl: Drop unused header asm/pnv-pci.h
The kernel API does not use anything from this header file.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Markus Elfring [Sat, 21 Jan 2017 15:10:50 +0000 (16:10 +0100)]
powerpc/mm: Return directly after a failed __copy_from_user() in sys_subpage_prot()
This function already has multiple exit points, so there's no harm
adding another. Although it looks odd to return directly in a function
which takes a lock, we've actually just dropped the mmap_sem in this
code, so there's really no reason to go via a label. And it means we can
drop the unhelpfully named out2 label.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Markus Elfring [Sat, 21 Jan 2017 14:30:15 +0000 (15:30 +0100)]
powerpc/sstep: Return directly after a failed address_ok() in emulate_step()
Setting err and going to ldst_done just returns 0, without using err, so
just return 0 directly. We already do that for other call sites in this
function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Mon, 23 Jan 2017 22:49:54 +0000 (09:49 +1100)]
powerpc/kernel: Fix unbalanced refcount on RTAS device node
The RTAS device-tree node's refcount has been increased by one in
the function call of_find_node_by_name(), but it's missed to be
decreased by one in the error path. It leads to unbalanced refcount
on RTAS device-tree node.
This fixes above issue by decreasing RTAS device-tree node's refcount
in error path.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Mon, 23 Jan 2017 22:49:53 +0000 (09:49 +1100)]
powerpc/kernel: Use of_property_read_u32() in rtas_initialize()
This uses of_property_read_u32() in rtas_initialize() so that we
needn't explicitly care the CPU's endian.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Mon, 23 Jan 2017 22:49:52 +0000 (09:49 +1100)]
powerpc/kernel: Remove nested if statements in rtas_initialize()
This removes the unnecessary nested if statements in function
rtas_initialize(), to simplify the code. No functional changes
introduced.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Markus Elfring [Wed, 24 Aug 2016 20:26:37 +0000 (22:26 +0200)]
powerpc/powernv/pci: Use kmalloc_array() in two functions
Use kmalloc_array(), which checks for overflow of the multiplication,
rather than doing it by hand.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Thu, 8 Dec 2016 03:42:13 +0000 (09:12 +0530)]
powerpc/mm: Fixup wrong LPCR_VRMASD value
In commit
a4b349540a26af ("powerpc/mm: Cleanup LPCR defines") we updated
LPCR_VRMASD wrongly as below.
-#define LPCR_VRMASD (0x1ful << (63-16))
+#define LPCR_VRMASD_SH 47
+#define LPCR_VRMASD (ASM_CONST(1) << LPCR_VRMASD_SH)
We initialize the VRMA bits in LPCR to 0x00 in kvm. Hence using a
different mask value as above while updating lpcr should not have any
impact.
This patch updates it to the correct value.
Fixes:
a4b349540a26 ("powerpc/mm: Cleanup LPCR defines")
Reported-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Jia He <hejianet@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Thu, 3 Nov 2016 05:15:42 +0000 (16:15 +1100)]
powerpc/64: Use optimized checksum routines on little-endian
Currently we have optimized hand-coded assembly checksum routines for
big-endian 64-bit systems, but for little-endian we use the generic C
routines. This modifies the optimized routines to work for
little-endian. With this, we no longer need to enable
CONFIG_GENERIC_CSUM. This also fixes a couple of comments in
checksum_64.S so they accurately reflect what the associated instruction
does.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Use the more common __BIG_ENDIAN__]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Thu, 3 Nov 2016 05:10:55 +0000 (16:10 +1100)]
powerpc/64: Fix checksum folding in csum_tcpudp_nofold and ip_fast_csum_nofold
These functions compute an IP checksum by computing a 64-bit sum and
folding it to 32 bits (the "nofold" in their names refers to folding
down to 16 bits). However, doing (u32) (s + (s >> 32)) is not
sufficient to fold a 64-bit sum to 32 bits correctly. The addition
can produce a carry out from bit 31, which needs to be added in to
the sum to produce the correct result.
To fix this, we copy the from64to32() function from lib/checksum.c
and use that.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Joel Stanley [Fri, 13 Jan 2017 03:53:49 +0000 (14:23 +1030)]
powerpc/powernv: Report size of OPAL memcons log
The OPAL memory console is reported to be size zero, as we do not
initialise the struct attr with any size information due to the size
being variable. This leads users to think that the console is empty.
Instead report the maximum size.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Wed, 4 Jan 2017 02:49:12 +0000 (08:19 +0530)]
powerpc/mm/4k: don't allocate larger pmd page table for 4k
We now support THP with both 64k and 4K page size configuration
for radix. (hash only support THP with 64K page size). Hence we
will have CONFIG_TRANSPARENT_HUGEPAGE enabled for both PPC_64K
and PPC_4K config. Since we only need large pmd page table
with hash configuration (to store the slot information
in the second half of the table) restrict the large pmd page table
to THP and 64K configs.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Wed, 14 Dec 2016 04:39:45 +0000 (10:09 +0530)]
powerpc/mm: Remove the debug hugepd_ok check
We don't do this for other page table entries. So lets keep this simple
and always return false for hugepd check on a 64K page size config.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Linus Torvalds [Sun, 22 Jan 2017 20:54:15 +0000 (12:54 -0800)]
Linux 4.10-rc5
Linus Torvalds [Sun, 22 Jan 2017 20:47:48 +0000 (12:47 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"Restore the retrigger callbacks in the IO APIC irq chips. That
addresses a long standing regression which got introduced with the
rewrite of the x86 irq subsystem two years ago and went unnoticed so
far"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Restore IO-APIC irq_chip retrigger callback
Linus Torvalds [Sun, 22 Jan 2017 20:45:47 +0000 (12:45 -0800)]
Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull smp/hotplug fix from Thomas Gleixner:
"Remove an unused variable which is a leftover from the notifier
removal"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Remove unused but set variable in _cpu_down()
Linus Torvalds [Sun, 22 Jan 2017 20:40:09 +0000 (12:40 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio/vhost fixes from Michael Tsirkin:
"Random fixes and cleanups that accumulated over the time"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio/s390: virtio: constify virtio_config_ops structures
virtio/s390: add missing \n to end of dev_err message
virtio/s390: support READ_STATUS command for virtio-ccw
tools/virtio/ringtest: tweaks for s390
tools/virtio/ringtest: fix run-on-all.sh for offline cpus
virtio_console: fix a crash in config_work_handler
vhost/scsi: silence uninitialized variable warning
vhost: scsi: constify target_core_fabric_ops structures
Linus Torvalds [Sun, 22 Jan 2017 20:36:47 +0000 (12:36 -0800)]
Merge branch 'for-rc' of git://git./linux/kernel/git/rzhang/linux
Pull thermal management fixes from Zhang Rui:
- fix a regression that thermal zone dynamically allocated sysfs
attributes are freed before they're removed, which is introduced in
4.10-rc1 (Jacob von Chorus)
- fix a boot warning because deprecated hwmon API is used (Fabio
Estevam)
- a couple of fixes for rockchip thermal driver (Brian Norris, Caesar
Wang)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: rockchip: fixes the conversion table
thermal: core: move tz->device.groups cleanup to thermal_release
thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()
thermal: rockchip: handle set_trips without the trip points
thermal: rockchip: optimize the conversion table
thermal: rockchip: fixes invalid temperature case
thermal: rockchip: don't pass table structs by value
thermal: rockchip: improve conversion error messages
Linus Torvalds [Sun, 22 Jan 2017 03:01:06 +0000 (19:01 -0800)]
Merge tag 'usb-4.10-rc5' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a few small USB fixes for 4.10-rc5.
Most of these are gadget/dwc2 fixes for reported issues, all of these
have been in linux-next for a while. The last one is a single xhci
WARN_ON removal to handle an issue that the dwc3 driver is hitting in
the 4.10-rc tree. The warning is harmless and needs to be removed, and
a "real" fix that is more complex will show up in 4.11-rc1 for this
device.
That last patch hasn't been in linux-next yet due to the weekend
timing, but it's a "simple" WARN_ON() removal so what could go wrong?
:)"
Famous last words.
* tag 'usb-4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: remove WARN_ON if dma mask is not set for platform devices
usb: dwc2: host: fix Wmaybe-uninitialized warning
usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM value
usb: gadget: udc: atmel: remove memory leak
usb: dwc3: exynos fix axius clock error path to do cleanup
usb: dwc2: Avoid suspending if we're in gadget mode
usb: dwc2: use u32 for DT binding parameters
usb: gadget: f_fs: Fix iterations on endpoints.
usb: dwc2: gadget: Fix DMA memory freeing
usb: gadget: composite: Fix function used to free memory
Linus Torvalds [Sun, 22 Jan 2017 02:53:06 +0000 (18:53 -0800)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"Two fixes:
- a regression fix for the multiple-pmem-namespace-per-region support
added in 4.9. Even if an existing environment is not using that
feature the act of creating and a destroying a single namespace
with the ndctl utility will lead to the proliferation of extra
unwanted namespace devices.
- a fix for the error code returned from the pmem driver when the
memcpy_mcsafe() routine returns -EFAULT. Btrfs seems to be the only
block I/O consumer that tries to parse the meaning of the error
code when it is non-zero.
Neither of these fixes are critical, the namespace leak is awkward in
that it can cause device naming to change and complicates debugging
namespace initialization issues. The error code fix is included out of
caution for what other consumers might be expecting -EIO for block I/O
errors"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, namespace: fix pmem namespace leak, delete when size set to zero
pmem: return EIO on read_pmem() failure
Linus Torvalds [Sun, 22 Jan 2017 02:46:45 +0000 (18:46 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One fix for Samsung Exynos524x SoCs where recent IOMMU patches have
caused some of these clocks to turn off when they were always left on
before"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk/samsung: exynos542x: mark some clocks as critical
Linus Torvalds [Sun, 22 Jan 2017 02:07:40 +0000 (18:07 -0800)]
Merge tag 'arc-4.10-rc5' of git://git./linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- more intc updates [Yuriv]
- fix module build when unwinder is turned off
- IO Coherency Programming model updates
- other miscellaneous
* tag 'arc-4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: Revert "ARC: mm: IOC: Don't enable IOC by default"
ARC: mm: split arc_cache_init to allow __init reaping of bulk
ARCv2: IOC: Use actual memory size to setup aperture size
ARCv2: IOC: Adhere to progamming model guidelines to avoid DMA corruption
ARCv2: IOC: refactor the IOC and SLC operations into own functions
ARC: module: Fix !CONFIG_ARC_DW2_UNWIND builds
ARCv2: save r30 on kernel entry as gcc uses it for code-gen
ARCv2: IRQ: Call entry/exit functions for chained handlers in MCIP
ARC: IRQ: Use hwirq instead of virq in mask/unmask
ARC: mmu: clarify the MMUv3 programming model