OSDN Git Service
Zhu Yanjun [Wed, 21 Mar 2018 08:08:37 +0000 (04:08 -0400)]
IB/rxe: optimize mcast recv process
In mcast recv process, the function skb_clone is used. In fact,
the refcount can be increased to replace cloning a new skb since
the original skb will not be modified before it is freed.
This can make the performance better and save the memory.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Colin Ian King [Thu, 29 Mar 2018 12:11:07 +0000 (13:11 +0100)]
qedr: Fix spelling mistake: "hanlde" -> "handle"
Trivial fix to spelling mistake in DP_ERR message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Steve Wise [Tue, 27 Mar 2018 15:38:07 +0000 (08:38 -0700)]
RDMA/CMA: Add rdma_port_space to UAPI
Since the rdma_port_space enum is being passed between user and kernel for
user cm_id setup, we need it in a UAPI header. So add it to
rdma_user_cm.h.
This also fixes the cm_id restrack changes which pass up the port space
value via the RDMA_NLDEV_ATTR_RES_PS attribute.
Fixes:
00313983cda6 ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Steve Wise [Tue, 27 Mar 2018 17:34:38 +0000 (10:34 -0700)]
RDMA/CMA: remove RDMA_PS_SDP
This is no longer supported, so remove it.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Sun, 25 Mar 2018 10:40:23 +0000 (13:40 +0300)]
IB/core: Refer to RoCE port property to decide building cache
IB core maintains the GID cache entries for the GID table.
This cache table has to be maintained regardless of HCA's
support of GID table.
For IB and iWarp ports, cache is created by querying the HCA.
For RoCE cache is created based on netdev events.
Therefore just refer to the RoCE port property of the {device, port} to
decide whether to build cache by querying HCA or from netdev events.
There is no need to check if HCA support GID table or not.
ib_cache_update() referred to RoCE attribute before validating
port. Though in all current callers port is valid, it is incorrect
to query RoCE port property before validating the port. Therefore,
rdma_protocol_roce() check is done after rdma_is_port_valid() verifies
that port is valid.
Fixes:
115b68aa6ea4 ("IB/ocrdma: Removed GID add/del null routines")
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Sun, 25 Mar 2018 10:40:22 +0000 (13:40 +0300)]
IB/core: Search GID only for IB link layer
Even though API is only used by IPoIB driver, its incorrect to refer
RoCE GID table property to search for GID.
Look for only IB link layer to search for the GID.
Fixes:
dbb12562f7c2 ("IB/{core, ipoib}: Simplify ib_find_gid to search only for IB link layer")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Sun, 25 Mar 2018 10:40:21 +0000 (13:40 +0300)]
IB/core: Refer to RoCE port property instead of GID table property
ib_find_gid_by_filter() searches GID with filter only for RoCE link
layer regardless of HCA's support for GID table.
Therefore, right way to lookup is compare RoCE port property and not
the GID table property.
Fixes:
99b27e3b5da0 ("IB/cache: Add ib_find_gid_by_filter cache API")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Sun, 25 Mar 2018 10:40:20 +0000 (13:40 +0300)]
IB/core: Generate GID change event regardless of RoCE GID table property
Due to following reasons, GID table event is generated regardless of GID
table property.
1. GID table cache is maintained at ib core layer regardless of link layer.
2. GID change event has no relation with IB link layer.
3. GID change event also doesn't depend on whether HCA supports GID table
or not.
Fixes:
f3906bd36087 ("IB/core: Refactor GID cache's ib_dispatch_event")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Sun, 25 Mar 2018 10:40:19 +0000 (13:40 +0300)]
IB/cm: Block processing alternate path handling RoCE Rx cm messages
Due to below reasons, it is better to not support alternate path receive
messages for RoCE in near term.
1. Alternate path for RoCE is not supported at rdmacm layer.
2. It is not supported in uverbs/core layer for RoCE.
3. Alternate path for IPv6 for link local address cannot resolve route
determinstically without a valid incoming interface id whose usecase
make sense only with dual port mode.
4. init_av_from_path while processing LAP messages for IB and RoCE can
lead to adding duplicate entry of AV into the port list, leads to list
corruption.
5. rdma-core userspace a well known userspace implementation has removed
support of libucm which use ucm.ko module, which is the only module that
can trigger alternate path related messages.
6. ucm kernel module is requested to be removed from the IB core in
patch [1].
[1] https://patchwork.kernel.org/patch/
10268503/
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Bloch [Tue, 27 Mar 2018 12:51:05 +0000 (15:51 +0300)]
IB/core: Protect against concurrent access to hardware stats
Currently access to hardware stats buffer isn't protected, this can
result in multiple writes and reads at the same time to the same
memory location. This can lead to providing an incorrect value to
the user. Add a mutex to protect against it.
Fixes:
b40f4757daa1 ("IB/core: Make device counter infrastructure dynamic")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Majd Dibbiny [Thu, 22 Mar 2018 13:34:04 +0000 (15:34 +0200)]
IB/mlx5: Respect new UMR capabilities
In some firmware configuration, UMR usage from Virtual Functions is restricted.
This information is published to the driver using new capability bits.
Avoid using UMRs in these cases and use the Firmware slow-path flow to create
mkeys and populate them with Virtual to Physical address translation.
Older drivers that do not have this patch, will end up using memory keys that
aren't populated with Virtual to Physical address translation that is done
part of the UMR work.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Majd Dibbiny [Thu, 22 Mar 2018 13:34:03 +0000 (15:34 +0200)]
IB/mlx5: Enable ECN capable bits for UD RoCE v2 QPs
When working with RC QPs, the FW sets the ECN capable bits for all
the RoCE v2 packets. On the other hand, for UD QPs, the driver needs
to set the the ECN capable bits in the Address Handler since the HW
generates each packet according to the Address Handler and not
the QP context.
If ECN is not enabled in NIC or switch, these bits are ignored.
Fixes:
2811ba51b049 ("IB/mlx5: Add RoCE fields to Address Vector")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Thu, 22 Mar 2018 09:52:02 +0000 (11:52 +0200)]
IB/uverbs: UAPI pointers should use __aligned_u64 type
The ioctl() UAPIs are meant to be used by both user-space
and kernel ioctl() handlers.
Mostly, these UAPI structs tend to consist of simple types, but
sometimes user-space pointers may be passed between user-space and
kernel. We would like to avoid dereferencing a user-space pointer in
the kernel, thus - we always define RDMA_UAPI_PTR as a __aligned_u64
type.
Fixes:
1f7ff9d5d36a ('IB/uverbs: Move to new headers and make naming consistent')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 27 Mar 2018 20:32:49 +0000 (14:32 -0600)]
Merge branch '32compat'
The design of the uAPI had intended all structs to share the same layout on 32
and 64 bit compiles. Unfortunately over the years some errors have crept in.
This series fixes all the incompatabilities. It goes along with a userspace
rdma-core series that causes the providers to use these structs directly and
then does various self-checks on the command formation.
Those checks were combined with output from pahole on 32 and 64 bit compiles
to confirm that the structure layouts are the same.
This series does not make implicit padding explicit, as long as the implicit
padding is the same on 32 and 64 bit compiles.
Finally, the issue is put to rest by using __aligned_u64 in the uapi headers,
if new code copies that type, and is checked in userspace, it is unlikely we
will see problems in future.
There are two patches that break the ABI for a 32 bit kernel, one for rxe and
one for mlx4. Both patches have notes, but the overall feeling from Doug and I
is that providing compat is just too difficult and not necessary since there
is no real user of a 32 bit userspace and 32 bit kernel for various good
reasons.
The 32 bit userspace / 64 bit kernel case however does seem to have some real
users and does need to work as designed.
* 32compat:
RDMA: Change all uapi headers to use __aligned_u64 instead of __u64
RDMA/rxe: Fix uABI structure layouts for 32/64 compat
RDMA/mlx4: Fix uABI structure layouts for 32/64 compat
RDMA/qedr: Fix uABI structure layouts for 32/64 compat
RDMA/ucma: Fix uABI structure layouts for 32/64 compat
RDMA: Remove minor pahole differences between 32/64
Jason Gunthorpe [Tue, 20 Mar 2018 20:19:51 +0000 (14:19 -0600)]
RDMA: Change all uapi headers to use __aligned_u64 instead of __u64
The new auditing standard for the subsystem will be to only use
__aligned_64 in uapi headers to try and prevent 32/64 compat bugs
from existing in the future.
Changing all existing usage will help ensure new developers copy the
right idea.
The before/after of this patch was tested using pahole on 32 and 64
bit compiles to confirm it has no change in the structure layout, so
this patch is a NOP.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 20 Mar 2018 20:19:50 +0000 (14:19 -0600)]
RDMA/rxe: Fix uABI structure layouts for 32/64 compat
With 32 bit compilation several of the fields become misaligned here.
Fixing this is an ABI break for 32 bit rxe and it is in well used
portions of the rxe ABI.
To handle this we bump the ABI version, as expected. However the user
space driver doesn't handle it properly today, so all existing user
space continues to work.
Updated userspace will start to require the necessary kernel version.
We don't expect there to be any 32 bit users of rxe. Most likely cases,
such as ARM 32 already generally don't work because rxe does not handle
the CPU cache properly on its shared with userspace pages.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 20 Mar 2018 20:19:49 +0000 (14:19 -0600)]
RDMA/mlx4: Fix uABI structure layouts for 32/64 compat
rss_caps in struct mlx4_uverbs_ex_query_device_resp is misaligned on
32 bit compared to 64 bit, add explicit padding.
The rss caps were introduced recently and are very rarely used in user
space, mainly for DPDK.
We don't expect there to be a real 32 bit user, so this change is done
without compat considerations.
Fixes:
09d208b258a2 ("IB/mlx4: Add report for RSS capabilities by vendor channel")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 20 Mar 2018 20:19:48 +0000 (14:19 -0600)]
RDMA/qedr: Fix uABI structure layouts for 32/64 compat
struct qedr_alloc_ucontext_resp is a different length in 32 and 64
bit compiles due to implicit compiler padding.
The structs alloc_pd_uresp, create_cq_uresp and create_qp_uresp are
not padded by the compiler, but in user space the compiler pads them
due to the way the core and driver structs are concatenated. Make
this padding explicit and consistent for future sanity.
The kernel driver can already handle the user buffer being smaller
than required and copies correctly, so no compat or ABI break happens
from introducing the explicit padding.
Acked-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 20 Mar 2018 20:19:47 +0000 (14:19 -0600)]
RDMA/ucma: Fix uABI structure layouts for 32/64 compat
The rdma_ucm_event_resp is a different length on 32 and 64 bit compiles.
The kernel requires it to be the expected length or longer so 32 bit
builds running on a 64 bit kernel will not work.
Retain full compat by having all kernels accept a struct with or without
the trailing reserved field.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 20 Mar 2018 20:19:46 +0000 (14:19 -0600)]
RDMA: Remove minor pahole differences between 32/64
To help automatic detection we want pahole to report the same struct
layouts for 32 and 64 bit compiles. These cases are all implicit
padding added at the end of embedded structs as part of a union.
The added reserved fields have no impact on the ABI.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Mon, 19 Mar 2018 17:30:43 +0000 (11:30 -0600)]
RDMA/ocrdma: Fix structure layout for ocrdma_alloc_pd
The udata's for alloc_pd cannot contain u64s due to alignment
constraints. Switch the two never-used u64's to arrays of u32 to reduce
the required struct alignment to 4 bytes.
These reserved fields are totally unnecessary, never written and never
read.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Steve Wise [Thu, 22 Mar 2018 19:53:35 +0000 (12:53 -0700)]
iw_cxgb4: Add ib_device->get_netdev support
This is useful to rdma ULPs.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Wed, 21 Mar 2018 15:16:35 +0000 (17:16 +0200)]
IB/cma: Resolve route only while receiving CM requests
Currently CM request for RoCE follows following flow.
rdma_create_id()
rdma_resolve_addr()
rdma_resolve_route()
For RC QPs:
rdma_connect()
->cma_connect_ib()
->ib_send_cm_req()
->cm_init_av_by_path()
->ib_init_ah_attr_from_path()
For UD QPs:
rdma_connect()
->cma_resolve_ib_udp()
->ib_send_cm_sidr_req()
->cm_init_av_by_path()
->ib_init_ah_attr_from_path()
In both the flows, route is already resolved before sending CM requests.
Therefore, code is refactored to avoid resolving route second time in
ib_cm layer.
ib_init_ah_attr_from_path() is extended to resolve route when it is not
yet resolved for RoCE link layer. This is achieved by caller setting
route_resolved field in path record whenever it has route already
resolved.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Wed, 21 Mar 2018 15:16:36 +0000 (17:16 +0200)]
IB/core: Refer to RoCE port property instead of GID table property
ib_query_gid() in commit [1] refers to RoCE GID table capability of
the HCA using rdma_cap_roce_gid_table().
ib_core maintains the GID table cache regardless of the HCA provider
drivers capability to maintain RoCE GID table.
Therefore, whether to return a GID table entry from the software cache or
from HCA should be done based on whether the port is RoCE or not.
[1] commit
03db3a2d81e6 ("IB/core: Add RoCE GID table management")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Wed, 21 Mar 2018 15:12:42 +0000 (17:12 +0200)]
RDMA/restrack: Remove ambiguity in resource track clean logic
The restrack clean routine had simple, but powerful WARN_ON check
to see if all resources are cleared prior to releasing device.
The WARN_ON check performed very well, but lack of information
which device caused to resource leak, the object type and origin
made debug to be fun and challenging at the same time.
The fact that all dumps were the same because restrack_clean() is
called in dealloc() didn't help either.
So let's fix spelling error and convert WARN_ON to be more debug
friendly. The dmesg cut below gives example of how the output
will look output for the case fixed in patch [1]
[ 438.421372] restrack: ------------[ cut here ]------------
[ 438.423448] restrack: BUG: RESTRACK detected leak of resources on mlx5_2
[ 438.425600] restrack: Kernel PD object allocated by mlx5_ib is not freed
[ 438.427753] restrack: Kernel CQ object allocated by mlx5_ib is not freed
[ 438.429660] restrack: ------------[ cut here ]------------
[1] https://patchwork.kernel.org/patch/
10298695/
Cc: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yixian Liu [Wed, 21 Mar 2018 06:11:18 +0000 (14:11 +0800)]
RDMA/hns: Fix cq record doorbell enable in kernel
Upon detecting both kernel and user space support record doorbell,
the kernel needs to enable this capability in hardware by db_en,
and it should take place before cq context configuration in
hns_roce_cq_alloc. Currently, db_en is configured after cq alloc
and db_map_user has similar problem.
Reported-by: Xiping Zhang <zhangxiping3@huawei.com>
Fixes:
9b44703d0a21 ("RDMA/hns: Support cq record doorbell for the user space")
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 20 Mar 2018 19:59:50 +0000 (13:59 -0600)]
RDMA/cxgb3: Use structs to describe the uABI instead of opencoding
Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Sinan Kaya [Tue, 20 Mar 2018 02:47:44 +0000 (22:47 -0400)]
IB/mlx4: Eliminate duplicate barriers on weakly-ordered archs
Code includes wmb() followed by writel(). writel() already has a barrier on
some architectures like arm64.
This ends up CPU observing two barriers back to back before executing the
register write.
Since code already has an explicit barrier call, changing writel() to
writel_relaxed().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Mon, 19 Mar 2018 13:02:40 +0000 (15:02 +0200)]
IB/uverbs: Enable ioctl() uAPI by default for new verbs
Enable the ioctl() uAPI for IB by default if the standard write()
uAPI (INFINIBAND_USER_ACCESS) is enabled. Verbs that are
also available under the old write() uAPI are put inside a new
INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI Kconfig.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Mon, 19 Mar 2018 13:02:39 +0000 (15:02 +0200)]
IB/uverbs: Add macros to simplify adding driver specific attributes
Previously, adding driver specific attributes required drivers to
declare all the hierarchy - object tree, object, methods and the
attributes themselves. A common use case is adding a few attributes to
an existing common method.
In order to simplify the driver's code, we add some macros to do all
these declarations automatically.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Mon, 19 Mar 2018 13:02:38 +0000 (15:02 +0200)]
IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file
Currently, all objects are declared in uverbs_std_types. This could lead
to a huge file once we implement all objects, methods and handlers.
Moving each object to its own file to keep the files smaller and more
readable. uverbs_std_types.c will only contain the parsing tree
definition and objects without any methods.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Mon, 19 Mar 2018 13:02:37 +0000 (15:02 +0200)]
IB/uverbs: Expose parsing tree of all common objects to providers
The ioctl() based uverbs is based on merging feature trees. This teaches
the generic parser how to parse methods according to the provider's
support. In order to support merging with the common objects, exporting
the common-object-tree to the provider drivers.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Mon, 19 Mar 2018 13:02:36 +0000 (15:02 +0200)]
IB/uverbs: Safely extend existing attributes
Previously, we've used UVERBS_ATTR_SPEC_F_MIN_SZ for extending existing
attributes. The behavior of this flag was the kernel accepts anything
bigger than the minimum size it specified. This is unsafe, since in
order to safely extend an attribute, we need to make sure unknown size
is zeroed. Replacing UVERBS_ATTR_SPEC_F_MIN_SZ with
UVERBS_ATTR_SPEC_F_MIN_SZ_OR_ZERO, which essentially checks that the
unknown size is zero. In addition, attributes are now decorated with
UVERBS_ATTR_TYPE and UVERBS_ATTR_STRUCT, so we can provide the minimum
and known length.
Users of this flag needs to use copy_from_or_zero functions/macros.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Mon, 19 Mar 2018 13:02:35 +0000 (15:02 +0200)]
IB/uverbs: Enable compact representation of uverbs_attr_spec
Downstream patches extend uverbs_attr_spec with new fields.
In order to save space, we move the type and flags fields to
the various attribute flavors contained in the union.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Mon, 19 Mar 2018 13:02:34 +0000 (15:02 +0200)]
IB/uverbs: Extend uverbs_ioctl header with driver_id
Extending uverbs_ioctl header with driver_id and another reserved
field. driver_id should be used in order to identify the driver.
Since every driver could have its own parsing tree, this is necessary
for strace support.
Downstream patches take off the EXPERIMENTAL flag from the ioctl() IB
support and thus we add some reserved fields for future usage.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Mon, 19 Mar 2018 13:02:33 +0000 (15:02 +0200)]
IB/uverbs: Move to new headers and make naming consistent
Use macros to make names consistent in ioctl() uAPI:
The ioctl() uAPI works with object-method hierarchy. The method part
also states which handler should be executed when this method is called
from user-space. Therefore, we need to tie method, method's id, method's
handler and the object owning this method together.
Previously, this was done through explicit developer chosen names.
This makes grepping the code harder. Changing the method's name,
method's handler and object's name to be automatically generated based
on the ids.
The headers are split in a way so they be included and used by
user-space. One header strictly contains structures that are used
directly by user-space applications, where another header is used for
internal library (i.e. libibverbs) to form the ioctl() commands.
Other header simply contains the required general command structure.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Bart Van Assche [Fri, 16 Mar 2018 17:55:57 +0000 (10:55 -0700)]
IB/srp: Disallow duplicate RDMA/CM connections
According to the SRP standard the INITIATOR and TARGET PORT IDENTIFIER
fields from the login request specify the I_T nexus. Whether or not an
SRP target closes an existing connection for an I_T nexus when a login
request is received depends on the value of the MULTICHANNEL field in
the login request. The SRP initiator derives the value of the
INITIATOR and TARGET PORT IDENTIFIER fields from the .id_ext,
.ioc_guid, .initiator_ext .sgid members of the srp_target_port
structure. This means that the .rdma_cm.dst check must be removed from
srp_conn_unique(). This patch avoids that for target ports that have
multiple addresses, e.g. an IPv4 and an IPv6 address, and if a
connection is established to both target port addresses, that the
initiator logs in alternatingly every 10 seconds to the other target
port address. An SRP target must namely terminate all but one
connections for a given I_T nexus if the MULTICHANNEL field has not
been set in the login request.
Fixes:
19f313438c77 ("IB/srp: Add RDMA/CM support")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Bodong Wang [Mon, 19 Mar 2018 13:10:30 +0000 (15:10 +0200)]
IB/mlx5: Packet packing enhancement for RAW QP
Enable RAW QP to be able to configure burst control by modify_qp. By
using burst control with rate limiting, user can achieve best
performance and accuracy. The burst control information is passed by
user through udata.
This patch also reports burst control capability for mlx5 related
hardwares, burst control is only marked as supported when both
packet_pacing_burst_bound and packet_pacing_typical_size are
supported.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Bodong Wang [Mon, 19 Mar 2018 13:10:29 +0000 (15:10 +0200)]
net/mlx5: Packet pacing enhancement
Add two new parameters: max_burst_sz and typical_pkt_size (both
in bytes) to rate limit configurations.
max_burst_sz: The device will schedule bursts of packets for an
SQ connected to this rate, smaller than or equal to this value.
Value 0x0 indicates packet bursts will be limited to the device
defaults. This field should be used if bursts of packets must be
strictly kept under a certain value.
typical_pkt_size: When the rate limit is intended for a stream of
similar packets, stating the typical packet size can improve the
accuracy of the rate limiter. The expected packet size will be
the same for all SQs associated with the same rate limit index.
Ethernet driver is updated according to this change, but these two
parameters will be kept as 0 due to lacking of proper way to get the
configurations from user space which requires to change
ndo_set_tx_maxrate interface.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yixian Liu [Mon, 19 Mar 2018 13:36:07 +0000 (21:36 +0800)]
RDMA/hns: Fix init resp when alloc ucontext
The data in resp will be copied from kernel to userspace, thus it needs to
be initialized to zeros to avoid copying uninited stack memory.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
e088a685eae9 ("RDMA/hns: Support rq record doorbell for the user space")
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Mon, 19 Mar 2018 06:07:14 +0000 (08:07 +0200)]
IB/core: Remove unimplemented ib_peek_cq
ib_peek_cq() verb doesn't seem be implemented in current code.
There is some past reference to it at [1] about it being unimplemented.
Lot of user documentation created out of kdoc refers to this
unimplemented API. Therefore, remove unimplemented API.
[1] http://lists.openfabrics.org/pipermail/ofw/2008-May/002465.html
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Mon, 19 Mar 2018 05:59:59 +0000 (07:59 +0200)]
IB/core: Use rdma_is_port_valid()
Use rdma_is_port_valid() which performs port validity check instead of
open coding the same check.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Fri, 16 Mar 2018 03:18:14 +0000 (21:18 -0600)]
RDMA/bnxt: Fix structure layout for bnxt_re_pd_resp
What is going on here is a bit subtle, in the kernel there is no
problem because the struct is copied using copy_from_user, so it
can safely have an 8 byte alignment, however in userspace it must
be constructed by concatenation with the ib_uverbs_alloc_pd_resp
struct. This is due to the required memory layout to execute the
command.
Since ibv_uverbs_alloc_pd_resp is only 4 bytes long, this causes
misalignment, and the user space will experience an unexpected padding.
Currently it works around this via pointer maths.
Make everything more robust by having the compiler reduce the alignment
of the struct to 4. The userspace has assertions to ensure this
works properly in all situations.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Honggang Li [Fri, 16 Mar 2018 02:37:13 +0000 (10:37 +0800)]
IB/mlx5: Set the default active rate and width to QDR and 4X
Before commit
f1b65df5a232 ("IB/mlx5: Add support for active_width and
active_speed in RoCE"), the mlx5_ib driver set the default active_width
and active_speed to IB_WIDTH_4X and IB_SPEED_QDR.
When the RoCE port is down, the RoCE port does not negotiate the active
width with the remote side, causing the active width to be zero. When
running userspace ibstat to view the port status, ibstat will panic as it
reads an invalid width from sys file.
This patch restores the original behavior.
Fixes:
f1b65df5a232 ("IB/mlx5: Add support for active_width and active_speed in RoCE").
Signed-off-by: Honggang Li <honli@redhat.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Honggang Li [Thu, 15 Mar 2018 09:02:13 +0000 (17:02 +0800)]
IB/core: Set speed string to SDR for invalid active rates
Before commit
f1b65df5a232 ("IB/mlx5: Add support for active_width and
active_speed in RoCE"), the mlx5_ib driver set default active_width and
active_speed to IB_WIDTH_4X and IB_SPEED_QDR.
Now, the active_width and active_speed are zeros if the RoCE port
is in DOWN state. The speed string should be set to " SDR" instead of
a blank string when active_speed is zero.
Signed-off-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Thu, 15 Mar 2018 09:10:42 +0000 (11:10 +0200)]
RDMA/restrack: Don't rely on uninitialized variable in restrack_add flow
The restrack code relies on the fact that object structures are zeroed at
the allocation stage, the mlx4 CQ wasn't allocated with kzalloc and it
caused to the following crash.
[ 137.392209] general protection fault: 0000 [#1] SMP KASAN PTI
[ 137.392972] CPU: 0 PID: 622 Comm: ibv_rc_pingpong Tainted: G W
4.16.0-rc1-00099-g00313983cda6 #11
[ 137.395079] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
[ 137.396866] RIP: 0010:rdma_restrack_del+0xc8/0xf0
[ 137.397762] RSP: 0018:
ffff8801b54e7968 EFLAGS:
00010206
[ 137.399008] RAX:
0000000000000000 RBX:
ffff8801d8bcbae8 RCX:
ffffffffb82314df
[ 137.400055] RDX:
dffffc0000000000 RSI:
dffffc0000000000 RDI:
70696b533d454741
[ 137.401103] RBP:
ffff8801d90c07a0 R08:
ffff8801d8bcbb00 R09:
0000000000000000
[ 137.402470] R10:
0000000000000001 R11:
ffffed0036a9cf52 R12:
ffff8801d90c0ad0
[ 137.403318] R13:
ffff8801d853fb20 R14:
ffff8801d8bcbb28 R15:
0000000000000014
[ 137.404736] FS:
00007fb415d43740(0000) GS:
ffff8801e5c00000(0000) knlGS:
0000000000000000
[ 137.406074] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 137.407101] CR2:
00007fb41557df20 CR3:
00000001b580c001 CR4:
00000000003606b0
[ 137.408308] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 137.409352] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 137.410385] Call Trace:
[ 137.411058] ib_destroy_cq+0x23/0x60
[ 137.411460] uverbs_free_cq+0x37/0xa0
[ 137.412040] remove_commit_idr_uobject+0x38/0xf0
[ 137.413042] _rdma_remove_commit_uobject+0x5c/0x160
[ 137.413782] ? lookup_get_idr_uobject+0x39/0x50
[ 137.414737] rdma_remove_commit_uobject+0x3b/0x70
[ 137.415742] ib_uverbs_destroy_cq+0x114/0x1d0
[ 137.416260] ? ib_uverbs_req_notify_cq+0x160/0x160
[ 137.417073] ? kernel_text_address+0x5c/0x90
[ 137.417805] ? __kernel_text_address+0xe/0x30
[ 137.418766] ? unwind_get_return_address+0x2f/0x50
[ 137.419558] ib_uverbs_write+0x453/0x6a0
[ 137.420220] ? show_ibdev+0x90/0x90
[ 137.420653] ? __kasan_slab_free+0x136/0x180
[ 137.421155] ? kmem_cache_free+0x78/0x1e0
[ 137.422192] ? remove_vma+0x83/0x90
[ 137.422614] ? do_munmap+0x447/0x6c0
[ 137.423045] ? vm_munmap+0xb0/0x100
[ 137.423481] ? SyS_munmap+0x1d/0x30
[ 137.424120] ? do_syscall_64+0xeb/0x250
[ 137.424984] ? entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 137.425611] ? lru_add_drain_all+0x270/0x270
[ 137.426116] ? lru_add_drain_cpu+0xa3/0x170
[ 137.426616] ? lru_add_drain+0x11/0x20
[ 137.427058] ? free_pages_and_swap_cache+0xa6/0x120
[ 137.427672] ? tlb_flush_mmu_free+0x78/0x90
[ 137.428168] ? arch_tlb_finish_mmu+0x6d/0xb0
[ 137.428680] __vfs_write+0xc4/0x350
[ 137.430917] ? kernel_read+0xa0/0xa0
[ 137.432758] ? remove_vma+0x90/0x90
[ 137.434781] ? __kasan_slab_free+0x14b/0x180
[ 137.437486] ? remove_vma+0x83/0x90
[ 137.439836] ? kmem_cache_free+0x78/0x1e0
[ 137.442195] ? percpu_counter_add_batch+0x1d/0x90
[ 137.444389] vfs_write+0xf7/0x280
[ 137.446030] SyS_write+0xa1/0x120
[ 137.447867] ? SyS_read+0x120/0x120
[ 137.449670] ? mm_fault_error+0x180/0x180
[ 137.451539] ? _cond_resched+0x16/0x50
[ 137.453697] ? SyS_read+0x120/0x120
[ 137.455883] do_syscall_64+0xeb/0x250
[ 137.457686] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 137.459595] RIP: 0033:0x7fb415637b94
[ 137.461315] RSP: 002b:
00007ffdebea7d88 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 137.463879] RAX:
ffffffffffffffda RBX:
00005565022d1bd0 RCX:
00007fb415637b94
[ 137.466519] RDX:
0000000000000018 RSI:
00007ffdebea7da0 RDI:
0000000000000003
[ 137.469543] RBP:
00007ffdebea7d98 R08:
0000000000000000 R09:
00005565022d40c0
[ 137.472479] R10:
00000000000009cf R11:
0000000000000246 R12:
00005565022d2520
[ 137.475125] R13:
00000000000003e8 R14:
0000000000000000 R15:
00007ffdebea7fd0
[ 137.477760] Code: f7 e8 dd 0d 0b ff 48 c7 43 40 00 00 00 00 48 89 df e8 0d 0b 0b ff 48 8d 7b 28 c6 03 00 e8 41 0d 0b ff 48 8b 7b 28 48 85 ff 74 06 <f0> ff 4f 48 74 10 5b 48 89 ef 5d 41 5c 41 5d 41 5e e9 32 b0 ee
[ 137.483375] RIP: rdma_restrack_del+0xc8/0xf0 RSP:
ffff8801b54e7968
[ 137.486436] ---[ end trace
81835a1ea6722eed ]---
[ 137.488566] Kernel panic - not syncing: Fatal exception
[ 137.491162] Kernel Offset: 0x36000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Fixes:
00313983cda6 ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Guy Levi [Thu, 15 Mar 2018 14:56:40 +0000 (16:56 +0200)]
IB/mlx4: Add Scatter FCS support over WQ creation
As a default, for Ethernet packets, the device scatters only the payload
of ingress packets. The scatter FCS feature lets the user to get the FCS
(Ethernet's frame check sequence) in the received WR's buffer as a 4
Bytes trailer following the packet's payload.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yishai Hadas [Thu, 15 Mar 2018 14:56:39 +0000 (16:56 +0200)]
IB/mlx4: Report TSO capabilities
Report to the user area the TSO device capabilities, it includes the
max_tso size and the QP types that support it.
The TSO is applicable only when when of the ports is ETH and the device
supports it.
uresp logic around rss_caps is updated to fix a till-now harmless bug
computing the length of the structure to copy. The code did not handle the
implicit padding before rss_caps correctly. This is necessay to copy
tss_caps successfully.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Henry Orosco [Wed, 14 Mar 2018 19:45:23 +0000 (14:45 -0500)]
i40iw: Tear-down connection after CQP Modify QP failure
There is no explicit tear-down sequence initiated on
connections if the Control QP OP, Modify QP to close,
fails. Fix this by triggering a driver generated
Asynchronous Event (AE) on Modify QP failures and
tear-down the connection on receipt of the AE.
This fix can be generalized to other Modify QP failures
(i.e. RTS->TERM, IDLE->RTS, etc) as any modify failure
will require a connection tear-down.
Fixes:
d37498417947 ("i40iw: add files for iwarp interface")
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Henry Orosco [Wed, 14 Mar 2018 19:45:22 +0000 (14:45 -0500)]
i40iw: Refactor of driver generated AEs
The flush CQP OP can be used to optionally generate
Asynchronous Events (AEs) in addition to QP flush.
Consolidate all HW AE generation code under a new
function i40iw_gen_ae which use the flush CQP OP
to only generate AEs.
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 14 Mar 2018 22:01:50 +0000 (16:01 -0600)]
RDMA/cxgb4: Use structs to describe the uABI instead of opencoding
Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 14 Mar 2018 20:39:42 +0000 (14:39 -0600)]
RDMA/hns: Use structs to describe the uABI instead of opencoding
Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 14 Mar 2018 04:01:32 +0000 (22:01 -0600)]
RDMA/i40iw: Move uapi header to include/uapi
All of these defines are part of the uABI for the driver, this
header duplicates providers/i40iw/i40iw-abi.h in rdma-core.
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 13 Mar 2018 22:26:46 +0000 (16:26 -0600)]
RDMA/mlx4: Move flag constants to uapi header
MLX4_USER_DEV_CAP_LARGE_CQE (via mlx4_ib_alloc_ucontext_resp.dev_caps)
and MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET (via
mlx4_uverbs_ex_query_device_resp.comp_mask) are copied directly to
userspace and form part of the uAPI.
Move them to the uapi header where they belong.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 13 Mar 2018 22:33:18 +0000 (16:33 -0600)]
RDMA/rxe: Use structs to describe the uABI instead of opencoding
Open coding pointer math is not acceptable for describing the uABI in
RDMA. Provide structs for all the cases.
The udata is casted to the struct as close to the verbs entry point
as possible for maximum clarity. Function signatures and so forth
are revised to allow for this.
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 13 Mar 2018 22:33:17 +0000 (16:33 -0600)]
RDMA/rxe: Get rid of confusing udata parameter to rxe_cq_chk_attr
It isn't used and it couldn't possibly ever be used correctly.
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Tejun Heo [Wed, 14 Mar 2018 19:45:10 +0000 (12:45 -0700)]
RDMAVT: Fix synchronization around percpu_ref
rvt_mregion uses percpu_ref for reference counting and RCU to protect
accesses from lkey_table. When a rvt_mregion needs to be freed, it
first gets unregistered from lkey_table and then rvt_check_refs() is
called to wait for in-flight usages before the rvt_mregion is freed.
rvt_check_refs() seems to have a couple issues.
* It has a fast exit path which tests percpu_ref_is_zero(). However,
a percpu_ref reading zero doesn't mean that the object can be
released. In fact, the ->release() callback might not even have
started executing yet. Proceeding with freeing can lead to
use-after-free.
* lkey_table is RCU protected but there is no RCU grace period in the
free path. percpu_ref uses RCU internally but it's sched-RCU whose
grace periods are different from regular RCU. Also, it generally
isn't a good idea to depend on internal behaviors like this.
To address the above issues, this patch removes the fast exit and adds
an explicit synchronize_rcu().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: linux-rdma@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Sinan Kaya [Wed, 14 Mar 2018 03:20:24 +0000 (23:20 -0400)]
RDMA/qedr: eliminate duplicate barriers on weakly-ordered archs
Code includes wmb() followed by writel() in multiple places. writel()
already has a barrier on some architectures like arm64.
This ends up CPU observing two barriers back to back before executing the
register write.
Since code already has an explicit barrier call, changing writel() to
writel_relaxed().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yixian Liu [Thu, 15 Mar 2018 07:23:14 +0000 (15:23 +0800)]
RDMA/hns: Fix cqn type and init resp
This patch changes the type of cqn from u32 to u64 to keep
userspace and kernel consistent, initializes resp both for
cq and qp to zeros, and also changes the condition judgment
of outlen considering future caps extension.
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes:
e088a685eae9 (hns: Support rq record doorbell for the user space)
Fixes:
9b44703d0a21 (hns: Support cq record doorbell for the user space)
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 13 Mar 2018 14:06:23 +0000 (16:06 +0200)]
IB/core: Move rdma_addr_find_l2_eth_by_grh to core_priv.h
Before commit [1], rdma_addr_find_l2_eth_by_grh() was an exported function
and therefore declaration in include/rdma/ib_addr.h was fine.
But now that its scope is limited to ib_core module, its better to have it
in core_priv.h.
[1] commit
1060f8653414 ("IB/{core/cm}: Fix generating a return AH for
RoCEE")
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 13 Mar 2018 14:06:22 +0000 (16:06 +0200)]
IB/cm: Introduce and use helper function to get cm_port from path
Introduce and use helper function get_cm_port_from_path() to get
cm_port based on the the path record entry.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 13 Mar 2018 14:06:20 +0000 (16:06 +0200)]
IB/core: Refactor ib_init_ah_attr_from_path() for RoCE
Resolving route for RoCE for a path record is needed only for the
received CM requests.
Therefore,
(a) ib_init_ah_attr_from_path() is refactored first to isolate the
code of resolving route.
(b) Setting dlid, path bits is not needed for RoCE.
Additionally ah attribute initialization is done from the path record
entry, so it is better to refer to path record entry type for
different link layer instead of ah attribute type while initializing
ah attribute itself.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 13 Mar 2018 14:06:18 +0000 (16:06 +0200)]
IB/cm: Add and use a helper function to add cm_id's to the port list
Add and use helper function add_cm_id_to_port_list() to attach
cm_id to port list.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 13 Mar 2018 14:06:17 +0000 (16:06 +0200)]
IB/ocrdma: Removed GID add/del null routines
add_gid() and del_gid() are optional callback routines.
ib_core ignores invoking them while updating GID table entries if
they are not implemented by provider drivers. Therefore remove them.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 13 Mar 2018 14:06:16 +0000 (16:06 +0200)]
IB/core: Remove rdma_resolve_ip_route() as exported symbol
rdma_resolve_ip_route() is used only by ib_core module. Therefore it is
removed as an exported symbol.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 13 Mar 2018 14:06:15 +0000 (16:06 +0200)]
IB/cma: Use rdma_protocol_roce() and remove cma_protocol_roce_dev_port()
rdma_protocol_roce() API from the ib_core already provides a way to
detect whether a given device+port is RoCE or not.
Therefore, make use of it and avoid implementing it again in rdmacm
module.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 13 Mar 2018 14:06:14 +0000 (16:06 +0200)]
IB/core: Honor port_num while resolving GID for IB link layer
ah_attr contains the port number to which cm_id is bound. However, while
searching for GID table for matching GID entry, the port number is
ignored.
This could cause the wrong GID to be used when the ah_attr is converted to
an AH.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 13 Mar 2018 14:06:13 +0000 (16:06 +0200)]
IB/core: Honor return status of ib_init_ah_from_mcmember()
The return status of ib_init_ah_from_mcmember() is ignored by
cma_ib_mc_handler(). Honor it and return error event if ah attribute
initialization failed.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 13 Mar 2018 14:06:12 +0000 (16:06 +0200)]
IB/{core, ipoib}: Simplify ib_find_gid() for unused ndev
ib_find_gid() is only used by IPoIB driver. For IB link layer, GID table
entries are not based on netdevice. Netdevice parameter is unused here.
Therefore, it is removed.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 13 Mar 2018 14:06:11 +0000 (16:06 +0200)]
IB/core: Fix comments of GID query functions
Exported symbol's comments should be with function definition and not in
the header file. Therefore comments of ib_find_cached_gid() and
ib_find_cached_gid_by_port() functions are moved closer to their
definitions.
The function name in then comment is different than the actual function
name, fix it to be same as ib_cache_gid_find_by_filter().
Also current comment section of ib_find_cached_gid_by_port() contains the
desciption of ib_find_cached_gid(), fix that as well.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Tue, 13 Mar 2018 13:29:28 +0000 (15:29 +0200)]
RDMA/mlx5: Simplify clean and destroy MR calls
The failure to destroy the MRs is printed on mlx5_core layer
as error and it makes warning prints useless.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Tue, 13 Mar 2018 13:29:27 +0000 (15:29 +0200)]
RDMA/mlx5: Guard ODP specific assignments with specific CONFIG
"live" is needed for ODP only and is better to be guarded
by appropriate CONFIG.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Tue, 13 Mar 2018 13:29:26 +0000 (15:29 +0200)]
RDMA/mlx5: Unify error flows in rereg MR failure paths
According to the IBTA spec 1.3, the driver failure in
MR reregister shall release old and new MRs.
C11-20: If the CI returns any other error, the CI shall
invalidate both "old" and "new" registrations, and release
any associated resources.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Tue, 13 Mar 2018 13:29:25 +0000 (15:29 +0200)]
RDMA/mlx5: Return proper value for not-supported command
Return -EOPNOTSUPP value to the user for unsupported reg_user_mr.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Tue, 13 Mar 2018 13:29:24 +0000 (15:29 +0200)]
RDMA/mlx5: Protect from NULL pointer derefence
The mlx5_ib_alloc_implicit_mr() can fail to acquire pages
and the returned mr pointer won't be valid. Ensure that it
is not error prior to access.
Cc: <stable@vger.kernel.org> # 4.10
Fixes:
81713d3788d2 ("IB/mlx5: Add implicit MR support")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Wed, 14 Mar 2018 22:49:12 +0000 (18:49 -0400)]
Merge branch 'k.o/wip/dl-for-rc' into k.o/wip/dl-for-next
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit
42cea83f9524
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit
b5ca15ad7e61 (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
Signed-off-by: Doug Ledford <dledford@redhat.com>
Arnd Bergmann [Tue, 20 Feb 2018 20:56:27 +0000 (21:56 +0100)]
infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
On 32-bit targets, we otherwise get a warning about an impossible constant
integer expression:
In file included from include/linux/kernel.h:11,
from include/linux/interrupt.h:6,
from drivers/infiniband/hw/bnxt_re/ib_verbs.c:39:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_query_device':
include/linux/bitops.h:7:24: error: left shift count >= width of type [-Werror=shift-count-overflow]
#define BIT(nr) (1UL << (nr))
^~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:61:34: note: in expansion of macro 'BIT'
#define BNXT_RE_MAX_MR_SIZE_HIGH BIT(39)
^~~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:62:30: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE_HIGH'
#define BNXT_RE_MAX_MR_SIZE BNXT_RE_MAX_MR_SIZE_HIGH
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/ib_verbs.c:149:25: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE'
ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE;
^~~~~~~~~~~~~~~~~~~
Fixes:
872f3578241d ("RDMA/bnxt_re: Add support for MRs with Huge pages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Arnd Bergmann [Tue, 20 Feb 2018 20:56:26 +0000 (21:56 +0100)]
infiniband: qplib_fp: fix pointer cast
Building for a 32-bit target results in a couple of warnings from casting
between a 32-bit pointer and a 64-bit integer:
drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_service_nq':
drivers/infiniband/hw/bnxt_re/qplib_fp.c:333:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
bnxt_qplib_arm_srq((struct bnxt_qplib_srq *)q_handle,
^
drivers/infiniband/hw/bnxt_re/qplib_fp.c:336:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
(struct bnxt_qplib_srq *)q_handle,
^
In file included from include/linux/byteorder/little_endian.h:5,
from arch/arm/include/uapi/asm/byteorder.h:22,
from include/asm-generic/bitops/le.h:6,
from arch/arm/include/asm/bitops.h:342,
from include/linux/bitops.h:38,
from include/linux/kernel.h:11,
from include/linux/interrupt.h:6,
from drivers/infiniband/hw/bnxt_re/qplib_fp.c:39:
drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_create_srq':
include/uapi/linux/byteorder/little_endian.h:31:43: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
^
include/linux/byteorder/generic.h:86:21: note: in expansion of macro '__cpu_to_le64'
#define cpu_to_le64 __cpu_to_le64
^~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/qplib_fp.c:569:19: note: in expansion of macro 'cpu_to_le64'
req.srq_handle = cpu_to_le64(srq);
Using a uintptr_t as an intermediate works on all architectures.
Fixes:
37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Andrew Morton [Tue, 13 Mar 2018 22:06:45 +0000 (15:06 -0700)]
drivers/infiniband/ulp/srpt/ib_srpt.c: fix build with gcc-4.4.4
gcc-4.4.4 has issues with initialization of anonymous unions:
drivers/infiniband/ulp/srpt/ib_srpt.c: In function 'srpt_zerolength_write':
drivers/infiniband/ulp/srpt/ib_srpt.c:854: error: unknown field 'wr_cqe' specified in initializer
drivers/infiniband/ulp/srpt/ib_srpt.c:854: warning: initialization makes integer from pointer without a cast
Work aound this.
Fixes:
2a78cb4db487 ("IB/srpt: Fix an out-of-bounds stack access in srpt_zerolength_write()")
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Andrew Morton [Tue, 13 Mar 2018 21:51:57 +0000 (14:51 -0700)]
drivers/infiniband/core/verbs.c: fix build with gcc-4.4.4
gcc-4.4.4 has issues with initialization of anonymous unions.
drivers/infiniband/core/verbs.c: In function '__ib_drain_sq':
drivers/infiniband/core/verbs.c:2204: error: unknown field 'wr_cqe' specified in initializer
drivers/infiniband/core/verbs.c:2204: warning: initialization makes integer from pointer without a cast
Work around this.
Fixes:
a1ae7d0345edd5 ("RDMA/core: Avoid that ib_drain_qp() triggers an out-of-bounds stack access")
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mark Bloch [Wed, 14 Mar 2018 07:14:15 +0000 (09:14 +0200)]
IB/mlx5: Fix cleanup order on unload
On load we create private CQ/QP/PD in order to be used by UMR, we create
those resources after we register ourself as an IB device, and we destroy
them after we unregister as an IB device. This was changed by commit
16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove
stages") which moved the destruction before we unregistration. This
allowed to trigger an invalid memory access when unloading mlx5_ib while
there are open resources:
BUG: unable to handle kernel paging request at
00000001002c012c
...
Call Trace:
mlx5_ib_post_send_wait+0x75/0x110 [mlx5_ib]
__slab_free+0x9a/0x2d0
delay_time_func+0x10/0x10 [mlx5_ib]
unreg_umr.isra.15+0x4b/0x50 [mlx5_ib]
mlx5_mr_cache_free+0x46/0x150 [mlx5_ib]
clean_mr+0xc9/0x190 [mlx5_ib]
dereg_mr+0xba/0xf0 [mlx5_ib]
ib_dereg_mr+0x13/0x20 [ib_core]
remove_commit_idr_uobject+0x16/0x70 [ib_uverbs]
uverbs_cleanup_ucontext+0xe8/0x1a0 [ib_uverbs]
ib_uverbs_cleanup_ucontext.isra.9+0x19/0x40 [ib_uverbs]
ib_uverbs_remove_one+0x162/0x2e0 [ib_uverbs]
ib_unregister_device+0xd4/0x190 [ib_core]
__mlx5_ib_remove+0x2e/0x40 [mlx5_ib]
mlx5_remove_device+0xf5/0x120 [mlx5_core]
mlx5_unregister_interface+0x37/0x90 [mlx5_core]
mlx5_ib_cleanup+0xc/0x225 [mlx5_ib]
SyS_delete_module+0x153/0x230
do_syscall_64+0x62/0x110
entry_SYSCALL_64_after_hwframe+0x21/0x86
...
We restore the original behavior by breaking the UMR stage into two parts,
pre and post IB registration stages, this way we can restore the original
functionality and maintain clean separation of logic between stages.
Fixes:
16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Martin Wilck [Wed, 14 Feb 2018 20:45:43 +0000 (21:45 +0100)]
rdma_rxe: make rxe work over 802.1q VLAN devices
This patch fixes RDMA/rxe over 802.1q VLAN devices.
Without it, I observed the following behavior:
a) adding a VLAN device to RXE via rxe_net_add() creates a non-functional
RDMA device. This is caused by the logic in enum_all_gids_of_dev_cb() /
is_eth_port_of_netdev(), which only considers networks connected to
"upper devices" of the configured network device, resulting in an empty
set of gids for a VLAN interface that is an "upper device" itself.
Later attempts to connect via this rdma device fail in cma_acuire_dev()
because no gids can be resolved.
b) adding the master device of the VLAN device instead seems to work
initially, target addresses via VLAN devices are resolved successfully.
But the connection times out because no 802.1q VLAN headers are
inserted in the ethernet packets, which are therefore never received.
This happens because the RXE layer sends the packets via the master
device rather than the VLAN device.
The problem could be solved by changing either a) or b). My thinking was
that the logic in a) was created deliberately, thus I decided to work on
b). It turns out that the information about the VLAN interface for the gid
at hand is available in the AV information. My patch converts the RXE code
to use this netdev instead of rxe->ndev. With this change, RXE over vlan
works on my test system.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Tue, 13 Mar 2018 16:37:27 +0000 (18:37 +0200)]
RDMA/ucma: Don't allow join attempts for unsupported AF family
Users can provide garbage while calling to ucma_join_ip_multicast(),
it will indirectly cause to rdma_addr_size() return 0, making the
call to ucma_process_join(), which had the right checks, but it is
better to check the input as early as possible.
The following crash from syzkaller revealed it.
kernel BUG at lib/string.c:1052!
invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 4113 Comm: syz-executor0 Not tainted 4.16.0-rc5+ #261
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051
RSP: 0018:
ffff8801ca81f8f0 EFLAGS:
00010286
RAX:
0000000000000022 RBX:
1ffff10039503f23 RCX:
0000000000000000
RDX:
0000000000000022 RSI:
1ffff10039503ed3 RDI:
ffffed0039503f12
RBP:
ffff8801ca81f8f0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000006 R11:
0000000000000000 R12:
ffff8801ca81f998
R13:
ffff8801ca81f938 R14:
ffff8801ca81fa58 R15:
000000000000fa00
FS:
0000000000000000(0000) GS:
ffff8801db200000(0063) knlGS:
000000000a12a900
CS: 0010 DS: 002b ES: 002b CR0:
0000000080050033
CR2:
0000000008138024 CR3:
00000001cbb58004 CR4:
00000000001606f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
memcpy include/linux/string.h:344 [inline]
ucma_join_ip_multicast+0x36b/0x3b0 drivers/infiniband/core/ucma.c:1421
ucma_write+0x2d6/0x3d0 drivers/infiniband/core/ucma.c:1633
__vfs_write+0xef/0x970 fs/read_write.c:480
vfs_write+0x189/0x510 fs/read_write.c:544
SYSC_write fs/read_write.c:589 [inline]
SyS_write+0xef/0x220 fs/read_write.c:581
do_syscall_32_irqs_on arch/x86/entry/common.c:330 [inline]
do_fast_syscall_32+0x3ec/0xf9f arch/x86/entry/common.c:392
entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f9ec99
RSP: 002b:
00000000ff8172cc EFLAGS:
00000282 ORIG_RAX:
0000000000000004
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000020000100
RDX:
0000000000000063 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000000
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 42 2c e3 fb eb de
55 48 89 fe 48 c7 c7 80 75 98 86 48 89 e5 e8 85 95 94 fb <0f> 0b 90 90 90 90
90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56
RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP:
ffff8801ca81f8f0
Fixes:
5bc2b7b397b0 ("RDMA/ucma: Allow user space to specify AF_IB when joining multicast")
Reported-by: <syzbot+2287ac532caa81900a4e@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Tue, 13 Mar 2018 09:43:23 +0000 (11:43 +0200)]
RDMA/ucma: Fix access to non-initialized CM_ID object
The attempt to join multicast group without ensuring that CMA device
exists will lead to the following crash reported by syzkaller.
[ 64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0
[ 64.076797] Read of size 8 at addr
00000000000000b0 by task join/691
[ 64.076797]
[ 64.076800] CPU: 1 PID: 691 Comm: join Not tainted
4.16.0-rc1-00219-gb97853b65b93 #23
[ 64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4
[ 64.076803] Call Trace:
[ 64.076809] dump_stack+0x5c/0x77
[ 64.076817] kasan_report+0x163/0x380
[ 64.085859] ? rdma_join_multicast+0x26e/0x12c0
[ 64.086634] rdma_join_multicast+0x26e/0x12c0
[ 64.087370] ? rdma_disconnect+0xf0/0xf0
[ 64.088579] ? __radix_tree_replace+0xc3/0x110
[ 64.089132] ? node_tag_clear+0x81/0xb0
[ 64.089606] ? idr_alloc_u32+0x12e/0x1a0
[ 64.090517] ? __fprop_inc_percpu_max+0x150/0x150
[ 64.091768] ? tracing_record_taskinfo+0x10/0xc0
[ 64.092340] ? idr_alloc+0x76/0xc0
[ 64.092951] ? idr_alloc_u32+0x1a0/0x1a0
[ 64.093632] ? ucma_process_join+0x23d/0x460
[ 64.094510] ucma_process_join+0x23d/0x460
[ 64.095199] ? ucma_migrate_id+0x440/0x440
[ 64.095696] ? futex_wake+0x10b/0x2a0
[ 64.096159] ucma_join_multicast+0x88/0xe0
[ 64.096660] ? ucma_process_join+0x460/0x460
[ 64.097540] ? _copy_from_user+0x5e/0x90
[ 64.098017] ucma_write+0x174/0x1f0
[ 64.098640] ? ucma_resolve_route+0xf0/0xf0
[ 64.099343] ? rb_erase_cached+0x6c7/0x7f0
[ 64.099839] __vfs_write+0xc4/0x350
[ 64.100622] ? perf_syscall_enter+0xe4/0x5f0
[ 64.101335] ? kernel_read+0xa0/0xa0
[ 64.103525] ? perf_sched_cb_inc+0xc0/0xc0
[ 64.105510] ? syscall_exit_register+0x2a0/0x2a0
[ 64.107359] ? __switch_to+0x351/0x640
[ 64.109285] ? fsnotify+0x899/0x8f0
[ 64.111610] ? fsnotify_unmount_inodes+0x170/0x170
[ 64.113876] ? __fsnotify_update_child_dentry_flags+0x30/0x30
[ 64.115813] ? ring_buffer_record_is_on+0xd/0x20
[ 64.117824] ? __fget+0xa8/0xf0
[ 64.119869] vfs_write+0xf7/0x280
[ 64.122001] SyS_write+0xa1/0x120
[ 64.124213] ? SyS_read+0x120/0x120
[ 64.126644] ? SyS_read+0x120/0x120
[ 64.128563] do_syscall_64+0xeb/0x250
[ 64.130732] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 64.132984] RIP: 0033:0x7f5c994ade99
[ 64.135699] RSP: 002b:
00007f5c99b97d98 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 64.138740] RAX:
ffffffffffffffda RBX:
00000000200001e4 RCX:
00007f5c994ade99
[ 64.141056] RDX:
00000000000000a0 RSI:
00000000200001c0 RDI:
0000000000000015
[ 64.143536] RBP:
00007f5c99b97ec0 R08:
0000000000000000 R09:
0000000000000000
[ 64.146017] R10:
0000000000000000 R11:
0000000000000246 R12:
00007f5c99b97fc0
[ 64.148608] R13:
0000000000000000 R14:
00007fff660e1c40 R15:
00007f5c99b989c0
[ 64.151060]
[ 64.153703] Disabling lock debugging due to kernel taint
[ 64.156032] BUG: unable to handle kernel NULL pointer dereference at
00000000000000b0
[ 64.159066] IP: rdma_join_multicast+0x26e/0x12c0
[ 64.161451] PGD
80000001d0298067 P4D
80000001d0298067 PUD
1dea39067 PMD 0
[ 64.164442] Oops: 0000 [#1] SMP KASAN PTI
[ 64.166817] CPU: 1 PID: 691 Comm: join Tainted: G B
4.16.0-rc1-00219-gb97853b65b93 #23
[ 64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4
[ 64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0
[ 64.177246] RSP: 0018:
ffff8801c8207860 EFLAGS:
00010282
[ 64.179901] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
ffffffff94789522
[ 64.183344] RDX:
1ffffffff2d50fa5 RSI:
0000000000000297 RDI:
0000000000000297
[ 64.186237] RBP:
ffff8801c8207a50 R08:
0000000000000000 R09:
ffffed0039040ea7
[ 64.189328] R10:
0000000000000001 R11:
ffffed0039040ea6 R12:
0000000000000000
[ 64.192634] R13:
0000000000000000 R14:
ffff8801e2022800 R15:
ffff8801d4ac2400
[ 64.196105] FS:
00007f5c99b98700(0000) GS:
ffff8801e5d00000(0000) knlGS:
0000000000000000
[ 64.199211] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 64.202046] CR2:
00000000000000b0 CR3:
00000001d1c48004 CR4:
00000000003606a0
[ 64.205032] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 64.208221] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 64.211554] Call Trace:
[ 64.213464] ? rdma_disconnect+0xf0/0xf0
[ 64.216124] ? __radix_tree_replace+0xc3/0x110
[ 64.219337] ? node_tag_clear+0x81/0xb0
[ 64.222140] ? idr_alloc_u32+0x12e/0x1a0
[ 64.224422] ? __fprop_inc_percpu_max+0x150/0x150
[ 64.226588] ? tracing_record_taskinfo+0x10/0xc0
[ 64.229763] ? idr_alloc+0x76/0xc0
[ 64.232186] ? idr_alloc_u32+0x1a0/0x1a0
[ 64.234505] ? ucma_process_join+0x23d/0x460
[ 64.237024] ucma_process_join+0x23d/0x460
[ 64.240076] ? ucma_migrate_id+0x440/0x440
[ 64.243284] ? futex_wake+0x10b/0x2a0
[ 64.245302] ucma_join_multicast+0x88/0xe0
[ 64.247783] ? ucma_process_join+0x460/0x460
[ 64.250841] ? _copy_from_user+0x5e/0x90
[ 64.253878] ucma_write+0x174/0x1f0
[ 64.257008] ? ucma_resolve_route+0xf0/0xf0
[ 64.259877] ? rb_erase_cached+0x6c7/0x7f0
[ 64.262746] __vfs_write+0xc4/0x350
[ 64.265537] ? perf_syscall_enter+0xe4/0x5f0
[ 64.267792] ? kernel_read+0xa0/0xa0
[ 64.270358] ? perf_sched_cb_inc+0xc0/0xc0
[ 64.272575] ? syscall_exit_register+0x2a0/0x2a0
[ 64.275367] ? __switch_to+0x351/0x640
[ 64.277700] ? fsnotify+0x899/0x8f0
[ 64.280530] ? fsnotify_unmount_inodes+0x170/0x170
[ 64.283156] ? __fsnotify_update_child_dentry_flags+0x30/0x30
[ 64.286182] ? ring_buffer_record_is_on+0xd/0x20
[ 64.288749] ? __fget+0xa8/0xf0
[ 64.291136] vfs_write+0xf7/0x280
[ 64.292972] SyS_write+0xa1/0x120
[ 64.294965] ? SyS_read+0x120/0x120
[ 64.297474] ? SyS_read+0x120/0x120
[ 64.299751] do_syscall_64+0xeb/0x250
[ 64.301826] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 64.304352] RIP: 0033:0x7f5c994ade99
[ 64.306711] RSP: 002b:
00007f5c99b97d98 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 64.309577] RAX:
ffffffffffffffda RBX:
00000000200001e4 RCX:
00007f5c994ade99
[ 64.312334] RDX:
00000000000000a0 RSI:
00000000200001c0 RDI:
0000000000000015
[ 64.315783] RBP:
00007f5c99b97ec0 R08:
0000000000000000 R09:
0000000000000000
[ 64.318365] R10:
0000000000000000 R11:
0000000000000246 R12:
00007f5c99b97fc0
[ 64.320980] R13:
0000000000000000 R14:
00007fff660e1c40 R15:
00007f5c99b989c0
[ 64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8
[ 64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP:
ffff8801c8207860
[ 64.332979] CR2:
00000000000000b0
[ 64.335550] ---[ end trace
0c00c17a408849c1 ]---
Reported-by: <syzbot+e6aba77967bd72cbc9d6@syzkaller.appspotmail.com>
Fixes:
c8f6a362bf3e ("RDMA/cma: Add multicast communication support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Arnd Bergmann [Tue, 13 Mar 2018 12:06:20 +0000 (13:06 +0100)]
RDMA/i40iw: include linux/irq.h
We get a build failure on ARM unless the header is included explicitly:
drivers/infiniband/hw/i40iw/i40iw_verbs.c: In function 'i40iw_get_vector_affinity':
drivers/infiniband/hw/i40iw/i40iw_verbs.c:2747:9: error: implicit declaration of function 'irq_get_affinity_mask'; did you mean 'irq_create_affinity_masks'? [-Werror=implicit-function-declaration]
return irq_get_affinity_mask(msix_vec->irq);
^~~~~~~~~~~~~~~~~~~~~
irq_create_affinity_masks
drivers/infiniband/hw/i40iw/i40iw_verbs.c:2747:9: error: returning 'int' from a function with return type 'const struct cpumask *' makes pointer from integer without a cast [-Werror=int-conversion]
return irq_get_affinity_mask(msix_vec->irq);
Fixes:
7e952b19eb63 ("i40iw: Implement get_vector_affinity API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ilya Lesokhin [Tue, 13 Mar 2018 13:18:48 +0000 (15:18 +0200)]
IB/mlx5: Maintain a single emergency page
The mlx5 driver needs to be able to issue invalidation to ODP MRs
even if it cannot allocate memory. To this end it preallocates
emergency pages to use when the situation arises.
This flow should be extremely rare enough, that we don't need
to worry about contention and therefore a single emergency page
is good enough.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Daniel Jurgens [Tue, 13 Mar 2018 13:18:47 +0000 (15:18 +0200)]
IB/mlx5: Only synchronize RCU once when removing mkeys
Instead synchronizing RCU in a loop when removing mkeys in a batch do it
once at the end before freeing them. The result is only waiting for one
RCU grace period instead of many serially.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mark Bloch [Tue, 13 Mar 2018 13:18:46 +0000 (15:18 +0200)]
IB/mlx5: Expose more priorities for bypass namespace
BYPASS namespace is used by the RDMA side to insert flow rules into
the vport RX flow tables. Currently only 8 priorities are exposed,
increase this to 16 to allow more flexibility. This change will also
cause the BYPASS namespace to use 32 levels (as apposed to 16 today) of
flow tables, 16 levels for regular rules and 16 for don't trap rules.
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Tatyana Nikolova [Mon, 12 Mar 2018 22:14:02 +0000 (17:14 -0500)]
RDMA/core: Do not use invalid destination in determining port reuse
cma_port_is_unique() allows local port reuse if the quad (source
address and port, destination address and port) for this connection
is unique. However, if the destination info is zero or unspecified, it
can't make a correct decision but still allows port reuse. For example,
sometimes rdma_bind_addr() is called with unspecified destination and
reusing the port can lead to creating a connection with a duplicate quad,
after the destination is resolved. The issue manifests when MPI scale-up
tests hang after the duplicate quad is used.
Set the destination address family and add checks for zero destination
address and port to prevent source port reuse based on invalid destination.
Fixes:
19b752a19dce ("IB/cma: Allow port reuse for rdma_id")
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 12 Mar 2018 20:55:55 +0000 (13:55 -0700)]
IB/srp: Fix IPv6 address parsing
Split IPv6 addresses at the colon that separates the IPv6 address
and the port number instead of at a colon in the middle of the IPv6
address. Check whether the IPv6 address is surrounded with square
brackets.
Fixes:
19f313438c77 ("IB/srp: Add RDMA/CM support")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Mon, 12 Mar 2018 19:26:37 +0000 (21:26 +0200)]
RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory
The failure in rereg_mr flow caused to set garbage value (error value)
into mr->umem pointer. This pointer is accessed at the release stage
and it causes to the following crash.
There is not enough to simply change umem to point to NULL, because the
MR struct is needed to be accessed during MR deregistration phase, so
delay kfree too.
[ 6.237617] BUG: unable to handle kernel NULL pointer dereference a
0000000000000228
[ 6.238756] IP: ib_dereg_mr+0xd/0x30
[ 6.239264] PGD
80000000167eb067 P4D
80000000167eb067 PUD
167f9067 PMD 0
[ 6.240320] Oops: 0000 [#1] SMP PTI
[ 6.240782] CPU: 0 PID: 367 Comm: dereg Not tainted
4.16.0-rc1-00029-gc198fafe0453 #183
[ 6.242120] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[ 6.244504] RIP: 0010:ib_dereg_mr+0xd/0x30
[ 6.245253] RSP: 0018:
ffffaf5d001d7d68 EFLAGS:
00010246
[ 6.246100] RAX:
0000000000000000 RBX:
ffff95d4172daf00 RCX:
0000000000000000
[ 6.247414] RDX:
00000000ffffffff RSI:
0000000000000001 RDI:
ffff95d41a317600
[ 6.248591] RBP:
0000000000000001 R08:
0000000000000000 R09:
0000000000000000
[ 6.249810] R10:
ffff95d417033c10 R11:
0000000000000000 R12:
ffff95d4172c3a80
[ 6.251121] R13:
ffff95d4172c3720 R14:
ffff95d4172c3a98 R15:
00000000ffffffff
[ 6.252437] FS:
0000000000000000(0000) GS:
ffff95d41fc00000(0000) knlGS:
0000000000000000
[ 6.253887] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 6.254814] CR2:
0000000000000228 CR3:
00000000172b4000 CR4:
00000000000006b0
[ 6.255943] Call Trace:
[ 6.256368] remove_commit_idr_uobject+0x1b/0x80
[ 6.257118] uverbs_cleanup_ucontext+0xe4/0x190
[ 6.257855] ib_uverbs_cleanup_ucontext.constprop.14+0x19/0x40
[ 6.258857] ib_uverbs_close+0x2a/0x100
[ 6.259494] __fput+0xca/0x1c0
[ 6.259938] task_work_run+0x84/0xa0
[ 6.260519] do_exit+0x312/0xb40
[ 6.261023] ? __do_page_fault+0x24d/0x490
[ 6.261707] do_group_exit+0x3a/0xa0
[ 6.262267] SyS_exit_group+0x10/0x10
[ 6.262802] do_syscall_64+0x75/0x180
[ 6.263391] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 6.264253] RIP: 0033:0x7f1b39c49488
[ 6.264827] RSP: 002b:
00007ffe2de05b68 EFLAGS:
00000246 ORIG_RAX:
00000000000000e7
[ 6.266049] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f1b39c49488
[ 6.267187] RDX:
0000000000000000 RSI:
000000000000003c RDI:
0000000000000000
[ 6.268377] RBP:
00007f1b39f258e0 R08:
00000000000000e7 R09:
ffffffffffffff98
[ 6.269640] R10:
00007f1b3a147260 R11:
0000000000000246 R12:
00007f1b39f258e0
[ 6.270783] R13:
00007f1b39f2ac20 R14:
0000000000000000 R15:
0000000000000000
[ 6.271943] Code: 74 07 31 d2 e9 25 d8 6c 00 b8 da ff ff ff c3 0f 1f
44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 07 53 48 8b
5f 08 <48> 8b 80 28 02 00 00 e8 f7 d7 6c 00 85 c0 75 04 3e ff 4b 18 5b
[ 6.274927] RIP: ib_dereg_mr+0xd/0x30 RSP:
ffffaf5d001d7d68
[ 6.275760] CR2:
0000000000000228
[ 6.276200] ---[ end trace
a35641f1c474bd20 ]---
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Sun, 11 Mar 2018 11:51:35 +0000 (13:51 +0200)]
RDMA/verbs: Simplify modify QP check
All callers to ib_modify_qp_is_ok() provides enum ib_qp_state
makes the checks of out-of-scope redundant. Let's remove them
together with updating function signature to return boolean result.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Sun, 11 Mar 2018 11:51:34 +0000 (13:51 +0200)]
RDMA/pvrdma: Properly annotate QP states
QP states provided by core layer are converted to enum ib_qp_state
and better to use internal variable in that type instead of int.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Sun, 11 Mar 2018 11:51:33 +0000 (13:51 +0200)]
RDMA/uverbs: Ensure validity of current QP state value
The QP state is internal enum which is checked at the driver
level by calling to ib_modify_qp_is_ok(). Move this check closer
to user and leave kernel users to be checked by compiler.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Sun, 11 Mar 2018 11:51:32 +0000 (13:51 +0200)]
RDMA/mlx5: Fix NULL dereference while accessing XRC_TGT QPs
mlx5 modify_qp() relies on FW that the error will be thrown if wrong
state is supplied. The missing check in FW causes the following crash
while using XRC_TGT QPs.
[ 14.769632] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 14.771085] IP: mlx5_ib_modify_qp+0xf60/0x13f0
[ 14.771894] PGD
800000001472e067 P4D
800000001472e067 PUD
14529067 PMD 0
[ 14.773126] Oops: 0002 [#1] SMP PTI
[ 14.773763] CPU: 0 PID: 365 Comm: ubsan Not tainted
4.16.0-rc1-00038-g8151138c0793 #119
[ 14.775192] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[ 14.777522] RIP: 0010:mlx5_ib_modify_qp+0xf60/0x13f0
[ 14.778417] RSP: 0018:
ffffbf48001c7bd8 EFLAGS:
00010246
[ 14.779346] RAX:
0000000000000000 RBX:
ffff9a8f9447d400 RCX:
0000000000000000
[ 14.780643] RDX:
0000000000000000 RSI:
000000000000000a RDI:
0000000000000000
[ 14.781930] RBP:
0000000000000000 R08:
00000000000217b0 R09:
ffffffffbc9c1504
[ 14.783214] R10:
fffff4a180519480 R11:
ffff9a8f94523600 R12:
ffff9a8f9493e240
[ 14.784507] R13:
ffff9a8f9447d738 R14:
000000000000050a R15:
0000000000000000
[ 14.785800] FS:
00007f545b466700(0000) GS:
ffff9a8f9fc00000(0000) knlGS:
0000000000000000
[ 14.787073] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 14.787792] CR2:
0000000000000000 CR3:
00000000144be000 CR4:
00000000000006b0
[ 14.788689] Call Trace:
[ 14.789007] _ib_modify_qp+0x71/0x120
[ 14.789475] modify_qp.isra.20+0x207/0x2f0
[ 14.790010] ib_uverbs_modify_qp+0x90/0xe0
[ 14.790532] ib_uverbs_write+0x1d2/0x3c0
[ 14.791049] ? __handle_mm_fault+0x93c/0xe40
[ 14.791644] __vfs_write+0x36/0x180
[ 14.792096] ? handle_mm_fault+0xc1/0x210
[ 14.792601] vfs_write+0xad/0x1e0
[ 14.793018] SyS_write+0x52/0xc0
[ 14.793422] do_syscall_64+0x75/0x180
[ 14.793888] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 14.794527] RIP: 0033:0x7f545ad76099
[ 14.794975] RSP: 002b:
00007ffd78787468 EFLAGS:
00000287 ORIG_RAX:
0000000000000001
[ 14.795958] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f545ad76099
[ 14.797075] RDX:
0000000000000078 RSI:
0000000020009000 RDI:
0000000000000003
[ 14.798140] RBP:
00007ffd78787470 R08:
00007ffd78787480 R09:
00007ffd78787480
[ 14.799207] R10:
00007ffd78787480 R11:
0000000000000287 R12:
00005599ada98760
[ 14.800277] R13:
00007ffd78787560 R14:
0000000000000000 R15:
0000000000000000
[ 14.801341] Code: 4c 8b 1c 24 48 8b 83 70 02 00 00 48 c7 83 cc 02 00
00 00 00 00 00 48 c7 83 24 03 00 00 00 00 00 00 c7 83 2c 03 00 00 00 00
00 00 <c7> 00 00 00 00 00 48 8b 83 70 02 00 00 c7 40 04 00 00 00 00 4c
[ 14.804012] RIP: mlx5_ib_modify_qp+0xf60/0x13f0 RSP:
ffffbf48001c7bd8
[ 14.804838] CR2:
0000000000000000
[ 14.805288] ---[ end trace
3f1da0df5c8b7c37 ]---
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Zhu Yanjun [Mon, 12 Mar 2018 03:30:28 +0000 (23:30 -0400)]
IB: remove duplicate header files
In hfi.h, the header file opa_addr.h is included twice.
In vt.h, the header file mmap.h is included twice.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Yixian Liu [Fri, 9 Mar 2018 10:36:32 +0000 (18:36 +0800)]
RDMA/hns: Support cq record doorbell for kernel space
This patch updates to support cq record doorbell for
the kernel space.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Yixian Liu [Fri, 9 Mar 2018 10:36:31 +0000 (18:36 +0800)]
RDMA/hns: Support rq record doorbell for kernel space
This patch updates to support rq record doorbell for
the kernel space.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Yixian Liu [Fri, 9 Mar 2018 10:36:30 +0000 (18:36 +0800)]
RDMA/hns: Support cq record doorbell for the user space
This patch updates to support cq record doorbell for
the user space.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Yixian Liu [Fri, 9 Mar 2018 10:36:29 +0000 (18:36 +0800)]
RDMA/hns: Support rq record doorbell for the user space
This patch adds interfaces and definitions to support the rq record
doorbell for the user space.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>