git.osdn.net Git - uclinux-h8/linux.git/log

Merge branch 'mlx4_en-fixes'

Tariq Toukan says:

====================
mlx4_en fixes

This patchset by Moshe contains fixes to the mlx4 Eth driver,
addressing issues in restart flow.

Patch 1 protects the restart task from being rescheduled while active.
  Please queue for -stable >= v2.6.
Patch 2 reconstructs SQs stuck in error state, and adds prints for improved
  debuggability.
  Please queue for -stable >= v3.12.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx4_en: Handle TX error CQE

In case error CQE was found while polling TX CQ, the QP is in error
state and all posted WQEs will generate error CQEs without any data
transmitted. Fix it by reopening the channels, via same method used for
TX timeout handling.

In addition add some more info on error CQE and WQE for debug.

Fixes: bd2f631d7c60 ("net/mlx4_en: Notify user when TX ring in error state")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx4_en: Avoid scheduling restart task if it is already running

Add restarting state flag to avoid scheduling another restart task while
such task is already running. Change task name from watchdog_task to
restart_task to better fit the task role.

Fixes: 1e338db56e5a ("mlx4_en: Fix a race at restart task")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix cwnd-limited bug for TSO deferral where we send nothing

When cwnd is not a multiple of the TSO skb size of N*MSS, we can get
into persistent scenarios where we have the following sequence:

(1) ACK for full-sized skb of N*MSS arrives
  -> tcp_write_xmit() transmit full-sized skb with N*MSS
  -> move pacing release time forward
  -> exit tcp_write_xmit() because pacing time is in the future

(2) TSQ callback or TCP internal pacing timer fires
  -> try to transmit next skb, but TSO deferral finds remainder of
     available cwnd is not big enough to trigger an immediate send
     now, so we defer sending until the next ACK.

(3) repeat...

So we can get into a case where we never mark ourselves as
cwnd-limited for many seconds at a time, even with
bulk/infinite-backlog senders, because:

o In case (1) above, every time in tcp_write_xmit() we have enough
cwnd to send a full-sized skb, we are not fully using the cwnd
(because cwnd is not a multiple of the TSO skb size). So every time we
send data, we are not cwnd limited, and so in the cwnd-limited
tracking code in tcp_cwnd_validate() we mark ourselves as not
cwnd-limited.

o In case (2) above, every time in tcp_write_xmit() that we try to
transmit the "remainder" of the cwnd but defer, we set the local
variable is_cwnd_limited to true, but we do not send any packets, so
sent_pkts is zero, so we don't call the cwnd-limited logic to update
tp->is_cwnd_limited.

Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler")
Reported-by: Ingemar Johansson <ingemar.s.johansson@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201209035759.1225145-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: flow_offload: Fix memory leak for indirect flow block

The offending commit introduces a cleanup callback that is invoked
when the driver module is removed to clean up the tunnel device
flow block. But it returns on the first iteration of the for loop.
The remaining indirect flow blocks will never be freed.

Fixes: 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure")
CC: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>

tcp: Retain ECT bits for tos reflection

For DCTCP, we have to retain the ECT bits set by the congestion control
algorithm on the socket when reflecting syn TOS in syn-ack, in order to
make ECN work properly.

Fixes: ac8f1710c12b ("tcp: reflect tos value received in SYN to the socket")
Reported-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethtool: fix stack overflow in ethnl_parse_bitset()

Syzbot reported a stack overflow in bitmap_from_arr32() called from
ethnl_parse_bitset() when bitset from netlink message is longer than
target bitmap length. While ethnl_compact_sanity_checks() makes sure that
trailing part is all zeros (i.e. the request does not try to touch bits
kernel does not recognize), we also need to cap change_bits to nbits so
that we don't try to write past the prepared bitmaps.

Fixes: 88db6d1e4f62 ("ethtool: add ethnl_parse_bitset() helper")
Reported-by: syzbot+9d39fa49d4df294aab93@syzkaller.appspotmail.com
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/3487ee3a98e14cd526f55b6caaa959d2dcbcad9f.1607465316.git.mkubecek@suse.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

e1000e: fix S0ix flow to allow S0i3.2 subset entry

Changed a configuration in the flows to align with
architecture requirements to achieve S0i3.2 substate.

This helps both i219V and i219LM configurations.

Also fixed a typo in the previous commit 632fbd5eb5b0
("e1000e: fix S0ix flows for cable connected case").

Fixes: 632fbd5eb5b0 ("e1000e: fix S0ix flows for cable connected case").
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20201208185632.151052-1-mario.limonciello@dell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "geneve: pull IP header before ECN decapsulation"

This reverts commit 4179b00c04d1 ("geneve: pull IP header before ECN decapsulation").

Eric says: "network header should have been pulled already before
hitting geneve_rx()". Let's revert the syzbot fix since it's causing
more harm than good, and revisit.

Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 4179b00c04d1 ("geneve: pull IP header before ECN decapsulation")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210569
Link: https://lore.kernel.org/netdev/CANn89iJVWfb=2i7oU1=D55rOyQnBbbikf+Mc6XHMkY7YX-yGEw@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

can: isotp: isotp_setsockopt(): block setsockopt on bound sockets

The isotp socket can be widely configured in its behaviour regarding addressing
types, fill-ups, receive pattern tests and link layer length. Usually all
these settings need to be fixed before bind() and can not be changed
afterwards.

This patch adds a check to enforce the common usage pattern.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Thomas Wagner <thwa1@web.de>
Link: https://lore.kernel.org/r/20201203140604.25488-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20201204133508.742120-3-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: select sane initial rcvq_space.space for big MSS

Before commit a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
small tcp_rmem[1] values were overridden by tcp_fixup_rcvbuf() to accommodate various MSS.

This is no longer the case, and Hazem Mohamed Abuelfotoh reported
that DRS would not work for MTU 9000 endpoints receiving regular (1500 bytes) frames.

Root cause is that tcp_init_buffer_space() uses tp->rcv_wnd for upper limit
of rcvq_space.space computation, while it can select later a smaller
value for tp->rcv_ssthresh and tp->window_clamp.

ss -temoi on receiver would show :

skmem:(r0,rb131072,t0,tb46080,f0,w0,o0,bl0,d0) rcv_space:62496 rcv_ssthresh:56596

This means that TCP can not increase its window in tcp_grow_window(),
and that DRS can never kick.

Fix this by making sure that rcvq_space.space is not bigger than number of bytes
that can be held in TCP receive queue.

People unable/unwilling to change their kernel can work around this issue by
selecting a bigger tcp_rmem[1] value as in :

echo "4096 196608 6291456" >/proc/sys/net/ipv4/tcp_rmem

Based on an initial report and patch from Hazem Mohamed Abuelfotoh
https://lore.kernel.org/netdev/20201204180622.14285-1-abuehaze@amazon.com/

Fixes: a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Fixes: 041a14d26715 ("tcp: start receiver buffer autotuning sooner")
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ll_temac: Fix potential NULL dereference in temac_probe()

platform_get_resource() may fail and in this case a NULL dereference
will occur.

Fix it to use devm_platform_ioremap_resource() instead of calling
platform_get_resource() and devm_ioremap().

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n);
+ if (!res)
+ return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);

Fixes: 8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: tipc: prevent possible null deref of link

`tipc_node_apply_property` does a null check on a `tipc_link_entry`
pointer but also accesses the same pointer out of the null check block.

This triggers a warning on Coverity Static Analyzer because we're
implying that `e->link` can BE null.

Move "Update MTU for node link entry" line into if block to make sure
that we're not in a state that `e->link` is null.

Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'stmmac-fixes'

Joakim Zhang says:

====================
patches for stmmac

A patch set for stmmac, fix some driver issues.

ChangeLogs:
V1->V2:
* add Fixes tag.
* add patch 5/5 into this patch set.

V2->V3:
* rebase to latest net tree where fixes go.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: overwrite the dma_cap.addr64 according to HW design

The current IP register MAC_HW_Feature1[ADDR64] only defines
32/40/64 bit width, but some SOCs support others like i.MX8MP
support 34 bits but it maps to 40 bits width in MAC_HW_Feature1[ADDR64].
So overwrite dma_cap.addr64 according to HW real design.

Fixes: 94abdad6974a ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: delete the eee_ctrl_timer after napi disabled

There have chance to re-enable the eee_ctrl_timer and fire the timer
in napi callback after delete the timer in .stmmac_release(), which
introduces to access eee registers in the timer function after clocks
are disabled then causes system hang. Found this issue when do
suspend/resume and reboot stress test.

It is safe to delete the timer after napi disabled and disable lpi mode.

Fixes: d765955d2ae0b ("stmmac: add the Energy Efficient Ethernet support")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: free tx skb buffer in stmmac_resume()

When do suspend/resume test, there have WARN_ON() log dump from
stmmac_xmit() funciton, the code logic:
entry = tx_q->cur_tx;
first_entry = entry;
WARN_ON(tx_q->tx_skbuff[first_entry]);

In normal case, tx_q->tx_skbuff[txq->cur_tx] should be NULL because
the skb should be handled and freed in stmmac_tx_clean().

But stmmac_resume() reset queue parameters like below, skb buffers
may not be freed.
tx_q->cur_tx = 0;
tx_q->dirty_tx = 0;

So free tx skb buffer in stmmac_resume() to avoid warning and
memory leak.

log:
[   46.139824] ------------[ cut here ]------------
[   46.144453] WARNING: CPU: 0 PID: 0 at drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3235 stmmac_xmit+0x7a0/0x9d0
[   46.154969] Modules linked in: crct10dif_ce vvcam(O) flexcan can_dev
[   46.161328] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O      5.4.24-2.1.0+g2ad925d15481 #1
[   46.170369] Hardware name: NXP i.MX8MPlus EVK board (DT)
[   46.175677] pstate: 80000005 (Nzcv daif -PAN -UAO)
[   46.180465] pc : stmmac_xmit+0x7a0/0x9d0
[   46.184387] lr : dev_hard_start_xmit+0x94/0x158
[   46.188913] sp : ffff800010003cc0
[   46.192224] x29: ffff800010003cc0 x28: ffff000177e2a100
[   46.197533] x27: ffff000176ef0840 x26: ffff000176ef0090
[   46.202842] x25: 0000000000000000 x24: 0000000000000000
[   46.208151] x23: 0000000000000003 x22: ffff8000119ddd30
[   46.213460] x21: ffff00017636f000 x20: ffff000176ef0cc0
[   46.218769] x19: 0000000000000003 x18: 0000000000000000
[   46.224078] x17: 0000000000000000 x16: 0000000000000000
[   46.229386] x15: 0000000000000079 x14: 0000000000000000
[   46.234695] x13: 0000000000000003 x12: 0000000000000003
[   46.240003] x11: 0000000000000010 x10: 0000000000000010
[   46.245312] x9 : ffff00017002b140 x8 : 0000000000000000
[   46.250621] x7 : ffff00017636f000 x6 : 0000000000000010
[   46.255930] x5 : 0000000000000001 x4 : ffff000176ef0000
[   46.261238] x3 : 0000000000000003 x2 : 00000000ffffffff
[   46.266547] x1 : ffff000177e2a000 x0 : 0000000000000000
[   46.271856] Call trace:
[   46.274302]  stmmac_xmit+0x7a0/0x9d0
[   46.277874]  dev_hard_start_xmit+0x94/0x158
[   46.282056]  sch_direct_xmit+0x11c/0x338
[   46.285976]  __qdisc_run+0x118/0x5f0
[   46.289549]  net_tx_action+0x110/0x198
[   46.293297]  __do_softirq+0x120/0x23c
[   46.296958]  irq_exit+0xb8/0xd8
[   46.300098]  __handle_domain_irq+0x64/0xb8
[   46.304191]  gic_handle_irq+0x5c/0x148
[   46.307936]  el1_irq+0xb8/0x180
[   46.311076]  cpuidle_enter_state+0x84/0x360
[   46.315256]  cpuidle_enter+0x34/0x48
[   46.318829]  call_cpuidle+0x18/0x38
[   46.322314]  do_idle+0x1e0/0x280
[   46.325539]  cpu_startup_entry+0x24/0x40
[   46.329460]  rest_init+0xd4/0xe0
[   46.332687]  arch_call_rest_init+0xc/0x14
[   46.336695]  start_kernel+0x420/0x44c
[   46.340353] ---[ end trace bc1ee695123cbacd ]---

Fixes: 47dd7a540b8a0 ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: start phylink instance before stmmac_hw_setup()

Start phylink instance and resume back the PHY to supply
RX clock to MAC before MAC layer initialization by calling
.stmmac_hw_setup(), since DMA reset depends on the RX clock,
otherwise DMA reset cost maximum timeout value then finally
timeout.

Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: increase the timeout for dma reset

Current timeout value is not enough for gmac5 dma reset
on imx8mp platform, increase the timeout range.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: fix feature flag setting at init time

Don't try to adjust XFRM support flags if the bond device isn't yet
registered. Bad things can currently happen when netdev_change_features()
is called without having wanted_features fully filled in yet. This code
runs both on post-module-load mode changes, as well as at module init
time, and when run at module init time, it is before register_netdevice()
has been called and filled in wanted_features. The empty wanted_features
led to features also getting emptied out, which was definitely not the
intended behavior, so prevent that from happening.

Originally, I'd hoped to stop adjusting wanted_features at all in the
bonding driver, as it's documented as being something only the network
core should touch, but we actually do need to do this to properly update
both the features and wanted_features fields when changing the bond type,
or we get to a situation where ethtool sees:

esp-hw-offload: off [requested on]

I do think we should be using netdev_update_features instead of
netdev_change_features here though, so we only send notifiers when the
features actually changed.

Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load")
Reported-by: Ivan Vecera <ivecera@redhat.com>
Suggested-by: Ivan Vecera <ivecera@redhat.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2020-12-07

1) Sysbot reported fixes for the new 64/32 bit compat layer.
   From Dmitry Safonov.

2) Fix a memory leak in xfrm_user_policy that was introduced
   by adding the 64/32 bit compat layer. From Yu Kuai.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
  net: xfrm: fix memory leak in xfrm_user_policy()
  xfrm/compat: Don't allocate memory with __GFP_ZERO
  xfrm/compat: memset(0) 64-bit padding at right place
  xfrm/compat: Translate by copying XFRMA_UNSPEC attribute
====================

Link: https://lore.kernel.org/r/20201207093937.2874932-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux

The m250_sel mux clock uses bit 4 in the PRG_ETH0 register. Fix this by
shifting the PRG_ETH0_CLK_M250_SEL_MASK accordingly as the "mask" in
struct clk_mux expects the mask relative to the "shift" field in the
same struct.

While here, get rid of the PRG_ETH0_CLK_M250_SEL_SHIFT macro and use
__ffs() to determine it from the existing PRG_ETH0_CLK_M250_SEL_MASK
macro.

Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201205213207.519341-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dpaa2-mac: Add a missing of_node_put after of_device_is_available

Add an 'of_node_put()' call when a tested device node is not available.

Fixes: 94ae899b2096 ("dpaa2-mac: add PCS support through the Lynx module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201206151339.44306-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: print new line in mptcp_seq_show() if mptcp isn't in use

When do cat /proc/net/netstat, the output isn't append with a new line, it looks like this:
[root@localhost ~]# cat /proc/net/netstat
...
MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0[root@localhost ~]#

This is because in mptcp_seq_show(), if mptcp isn't in use, net->mib.mptcp_statistics is NULL,
so it just puts all 0 after "MPTcpExt:", and return, forgot the '\n'.

After this patch:

[root@localhost ~]# cat /proc/net/netstat
...
MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0
[root@localhost ~]#

Fixes: fc518953bc9c8d7d ("mptcp: add and use MIB counter infrastructure")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/142e2fd9-58d9-bb13-fb75-951cccc2331e@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bridge: Fix a deadlock when enabling multicast snooping

When enabling multicast snooping, bridge module deadlocks on multicast_lock
if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2
network.

The deadlock was caused by the following sequence: While holding the lock,
br_multicast_open calls br_multicast_join_snoopers, which eventually causes
IP stack to (attempt to) send out a Listener Report (in igmp6_join_group).
Since the destination Ethernet address is a multicast address, br_dev_xmit
feeds the packet back to the bridge via br_multicast_rcv, which in turn
calls br_multicast_add_group, which then deadlocks on multicast_lock.

The fix is to move the call br_multicast_join_snoopers outside of the
critical section. This works since br_multicast_join_snoopers only deals
with IP and does not modify any multicast data structures of the bridge,
so there's no need to hold the lock.

Steps to reproduce:
1. sysctl net.ipv6.conf.all.force_mld_version=1
2. have another querier
3. ip link set dev bridge type bridge mcast_snooping 0 && \
   ip link set dev bridge type bridge mcast_snooping 1 < deadlock >

A typical call trace looks like the following:

[  936.251495]  _raw_spin_lock+0x5c/0x68
[  936.255221]  br_multicast_add_group+0x40/0x170 [bridge]
[  936.260491]  br_multicast_rcv+0x7ac/0xe30 [bridge]
[  936.265322]  br_dev_xmit+0x140/0x368 [bridge]
[  936.269689]  dev_hard_start_xmit+0x94/0x158
[  936.273876]  __dev_queue_xmit+0x5ac/0x7f8
[  936.277890]  dev_queue_xmit+0x10/0x18
[  936.281563]  neigh_resolve_output+0xec/0x198
[  936.285845]  ip6_finish_output2+0x240/0x710
[  936.290039]  __ip6_finish_output+0x130/0x170
[  936.294318]  ip6_output+0x6c/0x1c8
[  936.297731]  NF_HOOK.constprop.0+0xd8/0xe8
[  936.301834]  igmp6_send+0x358/0x558
[  936.305326]  igmp6_join_group.part.0+0x30/0xf0
[  936.309774]  igmp6_group_added+0xfc/0x110
[  936.313787]  __ipv6_dev_mc_inc+0x1a4/0x290
[  936.317885]  ipv6_dev_mc_inc+0x10/0x18
[  936.321677]  br_multicast_open+0xbc/0x110 [bridge]
[  936.326506]  br_multicast_toggle+0xec/0x140 [bridge]

Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address")
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

enetc: Fix reporting of h/w packet counters

Noticed some inconsistencies in packet statistics reporting.
This patch adds the missing Tx packet counter registers to
ethtool reporting and fixes the information strings for a
few of them.

Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201204171505.21389-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

udp: fix the proto value passed to ip_protocol_deliver_rcu for the segments

Guillaume noticed that: for segments udp_queue_rcv_one_skb() returns the
proto, and it should pass "ret" unmodified to ip_protocol_deliver_rcu().
Otherwize, with a negtive value passed, it will underflow inet_protos.

This can be reproduced with IPIP FOU:

# ip fou add port 5555 ipproto 4
# ethtool -K eth1 rx-gro-list on

Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection")
Reported-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: remove a misused pragma packed

hclge_dbg_reg_info[] is defined as an array of packed structure
accidentally. However, this array contains pointers, which are
no longer aligned naturally, and cannot be relocated on PPC64.
Hence, when compile-testing this driver on PPC64 with
CONFIG_RELOCATABLE=y (e.g. PowerPC allyesconfig), there will be
some warnings.

Since each field in structure hclge_qos_pri_map_cmd and
hclge_dbg_bitmap_cmd is type u8, the pragma packed is unnecessary
for these two structures as well, so remove the pragma packed in
hclge_debugfs.h to fix this issue, and this increases
hclge_dbg_reg_info[] by 4 bytes per entry.

Fixes: a582b78dfc33 ("net: hns3: code optimization for debugfs related to "dump reg"")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mscc: ocelot: fix dropping of unknown IPv4 multicast on Seville

The current assumption is that the felix DSA driver has flooding knobs
per traffic class, while ocelot switchdev has a single flooding knob.
This was correct for felix VSC9959 and ocelot VSC7514, but with the
introduction of seville VSC9953, we see a switch driven by felix.c which
has a single flooding knob.

So it is clear that we must do what should have been done from the
beginning, which is not to overwrite the configuration done by ocelot.c
in felix, but instead to teach the common ocelot library about the
differences in our switches, and set up the flooding PGIDs centrally.

The effect that the bogus iteration through FELIX_NUM_TC has upon
seville is quite dramatic. ANA_FLOODING is located at 0x00b548, and
ANA_FLOODING_IPMC is located at 0x00b54c. So the bogus iteration will
actually overwrite ANA_FLOODING_IPMC when attempting to write
ANA_FLOODING[1]. There is no ANA_FLOODING[1] in sevile, just ANA_FLOODING.

And when ANA_FLOODING_IPMC is overwritten with a bogus value, the effect
is that ANA_FLOODING_IPMC gets the value of 0x0003CF7D:
MC6_DATA = 61,
MC6_CTRL = 61,
MC4_DATA = 60,
MC4_CTRL = 0.
Because MC4_CTRL is zero, this means that IPv4 multicast control packets
are not flooded, but dropped. An invalid configuration, and this is how
the issue was actually spotted.

Reported-by: Eldar Gasanov <eldargasanov2@gmail.com>
Reported-by: Maxim Kochetkov <fido_max@inbox.ru>
Tested-by: Eldar Gasanov <eldargasanov2@gmail.com>
Fixes: 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch")
Fixes: 3c7b51bd39b2 ("net: dsa: felix: allow flooding for all traffic classes")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201204175416.1445937-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: marvell: prestera: Fix error return code in prestera_port_create()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1607071782-34006-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vrf: packets with lladdr src needs dst at input with orig_iif when needs strict

Depending on the order of the routes to fe80::/64 are installed on the
VRF table, the NS for the source link-local address of the originator
might be sent to the wrong interface.

This patch ensures that packets with link-local addr source is doing a
lookup with the orig_iif when the destination addr indicates that it
is strict.

Add the reproducer as a use case in self test script fcnal-test.sh.

Fixes: b4869aa2f881 ("net: vrf: ipv6 support for local traffic to local addresses")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201204030604.18828-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

can: softing: softing_netdev_open(): fix error handling

If softing_netdev_open() fails, we should call close_candev() to avoid
reference leak.

Fixes: 03fd3cf5a179d ("can: add driver for Softing card")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Link: https://lore.kernel.org/r/20201202151632.1343786-1-zhangqilong3@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20201204133508.742120-2-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ch_ktls: fix build warning for ipv4-only config

When CONFIG_IPV6 is disabled, clang complains that a variable
is uninitialized for non-IPv4 data:

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1046:6: error: variable 'cntrl1' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
        if (tx_info->ip_family == AF_INET) {
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1059:2: note: uninitialized use occurs here
        cntrl1 |= T6_TXPKT_ETHHDR_LEN_V(maclen - ETH_HLEN) |
        ^~~~~~

Replace the preprocessor conditional with the corresponding C version,
and make the ipv4 case unconditional in this configuration to improve
readability and avoid the warning.

Fixes: 86716b51d14f ("ch_ktls: Update cheksum information")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201203222641.964234-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mac80211: mesh: fix mesh_pathtbl_init() error path

If tbl_mpp can not be allocated, we call mesh_table_free(tbl_path)
while tbl_path rhashtable has not yet been initialized, which causes
panics.

Simply factorize the rhashtable_init() call into mesh_table_alloc()

WARNING: CPU: 1 PID: 8474 at kernel/workqueue.c:3040 __flush_work kernel/workqueue.c:3040 [inline]
WARNING: CPU: 1 PID: 8474 at kernel/workqueue.c:3040 __cancel_work_timer+0x514/0x540 kernel/workqueue.c:3136
Modules linked in:
CPU: 1 PID: 8474 Comm: syz-executor663 Not tainted 5.10.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__flush_work kernel/workqueue.c:3040 [inline]
RIP: 0010:__cancel_work_timer+0x514/0x540 kernel/workqueue.c:3136
Code: 5d c3 e8 bf ae 29 00 0f 0b e9 f0 fd ff ff e8 b3 ae 29 00 0f 0b 43 80 3c 3e 00 0f 85 31 ff ff ff e9 34 ff ff ff e8 9c ae 29 00 <0f> 0b e9 dc fe ff ff 89 e9 80 e1 07 80 c1 03 38 c1 0f 8c 7d fd ff
RSP: 0018:ffffc9000165f5a0 EFLAGS: 00010293
RAX: ffffffff814b7064 RBX: 0000000000000001 RCX: ffff888021c80000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888024039ca0 R08: dffffc0000000000 R09: fffffbfff1dd3e64
R10: fffffbfff1dd3e64 R11: 0000000000000000 R12: 1ffff920002cbebd
R13: ffff888024039c88 R14: 1ffff11004807391 R15: dffffc0000000000
FS: 0000000001347880(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000140 CR3: 000000002cc0a000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
rhashtable_free_and_destroy+0x25/0x9c0 lib/rhashtable.c:1137
mesh_table_free net/mac80211/mesh_pathtbl.c:69 [inline]
mesh_pathtbl_init+0x287/0x2e0 net/mac80211/mesh_pathtbl.c:785
ieee80211_mesh_init_sdata+0x2ee/0x530 net/mac80211/mesh.c:1591
ieee80211_setup_sdata+0x733/0xc40 net/mac80211/iface.c:1569
ieee80211_if_add+0xd5c/0x1cd0 net/mac80211/iface.c:1987
ieee80211_add_iface+0x59/0x130 net/mac80211/cfg.c:125
rdev_add_virtual_intf net/wireless/rdev-ops.h:45 [inline]
nl80211_new_interface+0x563/0xb40 net/wireless/nl80211.c:3855
genl_family_rcv_msg_doit net/netlink/genetlink.c:739 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
genl_rcv_msg+0xe4e/0x1280 net/netlink/genetlink.c:800
netlink_rcv_skb+0x190/0x3a0 net/netlink/af_netlink.c:2494
genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x780/0x930 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x9a8/0xd40 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0x519/0x800 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x2b1/0x360 net/socket.c:2440
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 60854fd94573 ("mac80211: mesh: convert path table to rhashtable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://lore.kernel.org/r/20201204162428.2583119-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

openvswitch: fix error return code in validate_and_copy_dec_ttl()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Changing 'return start' to 'return action_start' can fix this bug.

Fixes: 69929d4c49e1 ("net: openvswitch: fix TTL decrement action netlink message format")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20201204114314.1596-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: bridge: vlan: fix error return code in __vlan_add()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: f8ed289fab84 ("bridge: vlan: use br_vlan_(get|put)_master to deal with refcounts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/1607071737-33875-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv4: fix error return code in rtm_to_fib_config()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: d15662682db2 ("ipv4: Allow ipv6 gateway with ipv4 routes")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/1607071695-33740-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ethernet: select CONFIG_CRC32 as needed

A number of ethernet drivers require crc32 functionality to be
avaialable in the kernel, causing a link error otherwise:

arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast':
et131x.c:(.text+0x5918): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit':
macb_main.c:(.text+0x4b88): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode':
ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list':
fec_main.c:(.text+0x6120): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address':
fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow
arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read':
nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire':
nfp_resource.c:(.text+0x144): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list':
lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do':
rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del':
rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb':
arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index':
dr_ste.c:(.text+0x354): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast':
lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le'

Add the missing 'select CRC32' entries in Kconfig for each of them.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: pass the correct size when freeing DMA memory

When the coherent memory is freed in gsi_trans_pool_exit_dma(), we
are mistakenly passing the size of a single element in the pool
rather than the actual allocated size. Fix this bug.

Fixes: 9dd441e4ed575 ("soc: qcom: ipa: GSI transactions")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201203215106.17450-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: fq_pie: initialize timer earlier in fq_pie_init()

with the following tdc testcase:

83be: (qdisc, fq_pie) Create FQ-PIE with invalid number of flows

as fq_pie_init() fails, fq_pie_destroy() is called to clean up. Since the
timer is not yet initialized, it's possible to observe a splat like this:

  INFO: trying to register non-static key.
  the code is fine but needs lockdep annotation.
  turning off the locking correctness validator.
  CPU: 0 PID: 975 Comm: tc Not tainted 5.10.0-rc4+ #298
  Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
  Call Trace:
   dump_stack+0x99/0xcb
   register_lock_class+0x12dd/0x1750
   __lock_acquire+0xfe/0x3970
   lock_acquire+0x1c8/0x7f0
   del_timer_sync+0x49/0xd0
   fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
   qdisc_create+0x916/0x1160
   tc_modify_qdisc+0x3c4/0x1630
   rtnetlink_rcv_msg+0x346/0x8e0
   netlink_unicast+0x439/0x630
   netlink_sendmsg+0x719/0xbf0
   sock_sendmsg+0xe2/0x110
   ____sys_sendmsg+0x5ba/0x890
   ___sys_sendmsg+0xe9/0x160
   __sys_sendmsg+0xd3/0x170
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [...]
  ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0
  WARNING: CPU: 0 PID: 975 at lib/debugobjects.c:508 debug_print_object+0x162/0x210
  [...]
  Call Trace:
   debug_object_assert_init+0x268/0x380
   try_to_del_timer_sync+0x6a/0x100
   del_timer_sync+0x9e/0xd0
   fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
   qdisc_create+0x916/0x1160
   tc_modify_qdisc+0x3c4/0x1630
   rtnetlink_rcv_msg+0x346/0x8e0
   netlink_rcv_skb+0x120/0x380
   netlink_unicast+0x439/0x630
   netlink_sendmsg+0x719/0xbf0
   sock_sendmsg+0xe2/0x110
   ____sys_sendmsg+0x5ba/0x890
   ___sys_sendmsg+0xe9/0x160
   __sys_sendmsg+0xd3/0x170
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

fix it moving timer_setup() before any failure, like it was done on 'red'
with former commit 608b4adab178 ("net_sched: initialize timer earlier in
red_init()").

Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/2e78e01c504c633ebdff18d041833cf2e079a3a4.1607020450.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mac80211-for-net-2020-12-04' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Three small fixes:
* initialize some data to avoid using stack garbage
* fix 6 GHz channel selection in mac80211
* correctly restart monitor mode interfaces in mac80211

* tag 'mac80211-for-net-2020-12-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
  mac80211: set SDATA_STATE_RUNNING for monitor interfaces
  cfg80211: initialize rekey_data
  mac80211: fix return value of ieee80211_chandef_he_6ghz_oper
====================

Link: https://lore.kernel.org/r/20201204122017.118099-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mac80211: set SDATA_STATE_RUNNING for monitor interfaces

During restarrt, mac80211 is supposed to reconfigure the driver.
When there's a monitor interface, the interface is added and the
channel context for it was created, but not assigned to it as it
was not considered running during the restart.

Fix this by setting SDATA_STATE_RUNNING while adding monitor
interfaces.

Signed-off-by: Borwankar, Antara <antara.borwankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.e1df99693a4c.I494579f28018c2d0b9d4083a664cf872c28405ae@changeid
[reword commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: initialize rekey_data

In case we have old supplicant, the akm field is uninitialized.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.930f0ab7ebee.Ic546e384efab3f4a89f318eafddc3eb7d556aecb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix return value of ieee80211_chandef_he_6ghz_oper

ieee80211_chandef_he_6ghz_oper() needs to return true if it
determined a value 6 GHz chandef, fix that.

Fixes: 1d00ce807efa ("mac80211: support S1G association")
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/1606121152-3452-1-git-send-email-wgong@codeaurora.org
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge tag 'net-5.10-rc7' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc7, including fixes from bpf, netfilter,
  wireless drivers, wireless mesh and can.

  Current release - regressions:

   - mt76: usb: fix crash on device removal

  Current release - always broken:

   - xsk: Fix umem cleanup from wrong context in socket destruct

  Previous release - regressions:

   - net: ip6_gre: set dev->hard_header_len when using header_ops

   - ipv4: Fix TOS mask in inet_rtm_getroute()

   - net, xsk: Avoid taking multiple skbuff references

  Previous release - always broken:

   - net/x25: prevent a couple of overflows

   - netfilter: ipset: prevent uninit-value in hash_ip6_add

   - geneve: pull IP header before ECN decapsulation

   - mpls: ensure LSE is pullable in TC and openvswitch paths

   - vxlan: respect needed_headroom of lower device

   - batman-adv: Consider fragmentation for needed packet headroom

   - can: drivers: don't count arbitration loss as an error

   - netfilter: bridge: reset skb->pkt_type after POST_ROUTING traversal

   - inet_ecn: Fix endianness of checksum update when setting ECT(1)

   - ibmvnic: fix various corner cases around reset handling

   - net/mlx5: fix rejecting unsupported Connect-X6DX SW steering

   - net/mlx5: Enforce HW TX csum offload with kTLS"

* tag 'net-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering
  net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS
  net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled
  net/mlx5: Fix wrong address reclaim when command interface is down
  net/sched: act_mpls: ensure LSE is pullable before reading it
  net: openvswitch: ensure LSE is pullable before reading it
  net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl
  net: mvpp2: Fix error return code in mvpp2_open()
  chelsio/chtls: fix a double free in chtls_setkey()
  rtw88: debug: Fix uninitialized memory in debugfs code
  vxlan: fix error return code in __vxlan_dev_create()
  net: pasemi: fix error return code in pasemi_mac_open()
  cxgb3: fix error return code in t3_sge_alloc_qset()
  net/x25: prevent a couple of overflows
  dpaa_eth: copy timestamp fields to new skb in A-050385 workaround
  net: ip6_gre: set dev->hard_header_len when using header_ops
  mt76: usb: fix crash on device removal
  iwlwifi: pcie: add some missing entries for AX210
  iwlwifi: pcie: invert values of NO_160 device config entries
  iwlwifi: pcie: add one missing entry for AX210
  ...

Merge tag 's390-5.10-6' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:
"One commit is fixing lockdep irq state tracing which broke with -rc6.

  The other one fixes logical vs physical CPU address mixup in our PCI
  code.

  Summary:

   - fix lockdep irq state tracing

   - fix logical vs physical CPU address confusion in PCI code"

* tag 's390-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix irq state tracing
  s390/pci: fix CPU address in MSI for directed IRQ

Merge tag '9p-for-5.10-rc7' of git://github.com/martinetd/linux

Pull 9p fixes from Dominique Martinet:
"Restore splice functionality for 9p"

* tag '9p-for-5.10-rc7' of git://github.com/martinetd/linux:
fs: 9p: add generic splice_write file operation
fs: 9p: add generic splice_read file operations

Merge branch 'mlx5-fixes-2020-12-01'

Saeed Mahameed says:

====================
mlx5 fixes 2020-12-01

This series introduces some fixes to mlx5 driver.
====================

Link: https://lore.kernel.org/r/20201203043946.235385-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering

STEs format for Connect-X5 and Connect-X6DX different. Currently, on
Connext-X6DX the SW steering would break at some point when building STEs
w/o giving a proper error message. Fix this by checking the STE format of
the current device when initializing domain: add mlx5_ifc definitions for
Connect-X6DX SW steering, read FW capability to get the current format
version, and check this version when domain is being created.

Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS

Checksum calculation cannot be done in SW for TX kTLS HW offloaded
packets.
Offload it to the device, disregard the declared state of the TX
csum offload feature.

Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled

Fix build when CONFIG_IPV6 is not enabled by making a function
be built conditionally.

Fixes these build errors and warnings:

../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c: In function 'accel_fs_tcp_set_ipv6_flow':
../include/net/sock.h:380:34: error: 'struct sock_common' has no member named 'skc_v6_daddr'; did you mean 'skc_daddr'?
  380 | #define sk_v6_daddr  __sk_common.skc_v6_daddr
      |                                  ^~~~~~~~~~~~
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:55:14: note: in expansion of macro 'sk_v6_daddr'
   55 |         &sk->sk_v6_daddr, 16);
      |              ^~~~~~~~~~~
At top level:
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:47:13: warning: 'accel_fs_tcp_set_ipv6_flow' defined but not used [-Wunused-function]
   47 | static void accel_fs_tcp_set_ipv6_flow(struct mlx5_flow_spec *spec, struct sock *sk)

Fixes: 5229a96e59ec ("net/mlx5e: Accel, Expose flow steering API for rules add/del")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Fix wrong address reclaim when command interface is down

When command interface is down, driver to reclaim all 4K page chucks that
were hold by the Firmeware. Fix a bug for 64K page size systems, where
driver repeatedly released only the first chunk of the page.

Define helper function to fill 4K chunks for a given Firmware pages.
Iterate over all unreleased Firmware pages and call the hepler per each.

Fixes: 5adff6a08862 ("net/mlx5: Fix incorrect page count when in internal error")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: act_mpls: ensure LSE is pullable before reading it

when 'act_mpls' is used to mangle the LSE, the current value is read from
the packet dereferencing 4 bytes at mpls_hdr(): ensure that the label is
contained in the skb "linear" area.

Found by code inspection.

v2:
- use MPLS_HLEN instead of sizeof(new_lse), thanks to Jakub Kicinski

Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/3243506cba43d14858f3bd21ee0994160e44d64a.1606987058.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: openvswitch: ensure LSE is pullable before reading it

when openvswitch is configured to mangle the LSE, the current value is
read from the packet dereferencing 4 bytes at mpls_hdr(): ensure that
the label is contained in the skb "linear" area.

Found by code inspection.

Fixes: d27cf5c59a12 ("net: core: add MPLS update core helper and use in OvS")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/aa099f245d93218b84b5c056b67b6058ccf81a66.1606987185.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl

skb_mpls_dec_ttl() reads the LSE without ensuring that it is contained in
the skb "linear" area. Fix this calling pskb_may_pull() before reading the
current ttl.

Found by code inspection.

Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/53659f28be8bc336c113b5254dc637cc76bbae91.1606987074.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-drivers-2020-12-03' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.10

Second, and most likely final, set of fixes for v5.10. Small fixes and
PCI id addtions.

iwlwifi
* PCI id additions
mt76
* fix a kernel crash during device removal
rtw88
* fix uninitialized memory in debugfs code

* tag 'wireless-drivers-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers:
  rtw88: debug: Fix uninitialized memory in debugfs code
  mt76: usb: fix crash on device removal
  iwlwifi: pcie: add some missing entries for AX210
  iwlwifi: pcie: invert values of NO_160 device config entries
  iwlwifi: pcie: add one missing entry for AX210
  iwlwifi: update MAINTAINERS entry
====================

Link: https://lore.kernel.org/r/20201203183408.EE88AC43461@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mvpp2: Fix error return code in mvpp2_open()

Fix to return negative error code -ENOENT from invalid configuration
error handling case instead of 0, as done elsewhere in this function.

Fixes: 4bb043262878 ("net: mvpp2: phylink support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201203141806.37966-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

chelsio/chtls: fix a double free in chtls_setkey()

The "skb" is freed by the transmit code in cxgb4_ofld_send() and we
shouldn't use it again. But in the current code, if we hit an error
later on in the function then the clean up code will call kfree_skb(skb)
and so it causes a double free.

Set the "skb" to NULL and that makes the kfree_skb() a no-op.

Fixes: d25f2f71f653 ("crypto: chtls - Program the TLS session Key")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X8ilb6PtBRLWiSHp@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

uapi: fix statx attribute value overlap for DAX & MOUNT_ROOT

STATX_ATTR_MOUNT_ROOT and STATX_ATTR_DAX got merged with the same value,
so one of them needs fixing. Move STATX_ATTR_DAX.

While we're in here, clarify the value-matching scheme for some of the
attributes, and explain why the value for DAX does not match.

Fixes: 80340fe3605c ("statx: add mount_root")
Fixes: 712b2698e4c0 ("fs/stat: Define DAX statx attribute")
Link: https://lore.kernel.org/linux-fsdevel/7027520f-7c79-087e-1d00-743bdefa1a1e@redhat.com/
Link: https://lore.kernel.org/lkml/20201202214629.1563760-1-ira.weiny@intel.com/
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: <stable@vger.kernel.org> # 5.8
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pwm: sl28cpld: fix getting driver data in pwm callbacks

Currently .get_state() and .apply() use dev_get_drvdata() on the struct
device related to the pwm chip. This only works after .probe() called
platform_set_drvdata() which in this driver happens only after
pwmchip_add() and so comes possibly too late.

Instead of setting the driver data earlier use the traditional
container_of approach as this way the driver data is conceptually and
computational nearer.

Fixes: 9db33d221efc ("pwm: Add support for sl28cpld PWM controller")
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/syscall: fix syscall registers retrieval on 32-bit platforms

Lilith >_> and Claudio Bozzato of Cisco Talos security team reported
that collect_syscall() improperly casts the syscall registers to 64-bit
values leaking the uninitialized last 24 bytes on 32-bit platforms, that
are visible in /proc/self/syscall.

The cause is that info->data.args are u64 while syscall_get_arguments()
uses longs, as hinted by the bogus pointer cast in the function.

Let's just proceed like the other call places, by retrieving the
registers into an array of longs before assigning them to the caller's
array. This was successfully tested on x86_64, i386 and ppc32.

Reference: CVE-2020-28588, TALOS-2020-1211
Fixes: 631b7abacd02 ("ptrace: Remove maxargs from task_current_syscall()")
Cc: Greg KH <greg@kroah.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (ppc32)
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtw88: debug: Fix uninitialized memory in debugfs code

This code does not ensure that the whole buffer is initialized and none
of the callers check for errors so potentially none of the buffer is
initialized. Add a memset to eliminate this bug.

Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/X8ilOfVz3pf0T5ec@mwanda

vxlan: fix error return code in __vxlan_dev_create()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1606903122-2098-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: pasemi: fix error return code in pasemi_mac_open()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 72b05b9940f0 ("pasemi_mac: RX/TX ring management cleanup")
Fixes: 8d636d8bc5ff ("pasemi_mac: jumbo frame support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1606903035-1838-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

cxgb3: fix error return code in t3_sge_alloc_qset()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: b1fb1f280d09 ("cxgb3 - Fix dma mapping error path")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Raju Rangoju <rajur@chelsio.com>
Link: https://lore.kernel.org/r/1606902965-1646-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/x25: prevent a couple of overflows

The .x25_addr[] address comes from the user and is not necessarily
NUL terminated.  This leads to a couple problems.  The first problem is
that the strlen() in x25_bind() can read beyond the end of the buffer.

The second problem is more subtle and could result in memory corruption.
The call tree is:
  x25_connect()
  --> x25_write_internal()
      --> x25_addr_aton()

The .x25_addr[] buffers are copied to the "addresses" buffer from
x25_write_internal() so it will lead to stack corruption.

Verify that the strings are NUL terminated and return -EINVAL if they
are not.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: a9288525d2ae ("X25: Dont let x25_bind use addresses containing characters")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/X8ZeAKm8FnFpN//B@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'gfs2-v5.10-rc5-fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes"

* tag 'gfs2-v5.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix deadlock between gfs2_{create_inode,inode_lookup} and delete_work_func
  gfs2: Upgrade shared glocks for atime updates
  gfs2: Don't freeze the file system during unmount
  gfs2: check for empty rgrp tree in gfs2_ri_update
  gfs2: set lockdep subclass for iopen glocks
  gfs2: Fix deadlock dumping resource group glocks

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"I'm sad to say that we've got an unusually large arm64 fixes pull for
  rc7 which addresses numerous significant instrumentation issues with
  our entry code.

  Without these patches, lockdep is hopelessly unreliable in some
  configurations [1,2] and syzkaller is therefore not a lot of use
  because it's so noisy.

  Although much of this has always been broken, it appears to have been
  exposed more readily by other changes such as 044d0d6de9f5 ("lockdep:
  Only trace IRQ edges") and general lockdep improvements around IRQ
  tracing and NMIs.

  Fixing this properly required moving much of the instrumentation hooks
  from our entry assembly into C, which Mark has been working on for the
  last few weeks. We're not quite ready to move to the recently added
  generic functions yet, but the code here has been deliberately written
  to mimic that closely so we can look at cleaning things up once we
  have a bit more breathing room.

  Having said all that, the second version of these patches was posted
  last week and I pushed it into our CI (kernelci and cki) along with a
  commit which forced on PROVE_LOCKING, NOHZ_FULL and
  CONTEXT_TRACKING_FORCE. The result? We found a real bug in the
  md/raid10 code [3].

  Oh, and there's also a really silly typo patch that's unrelated.

  Summary:

   - Fix numerous issues with instrumentation and exception entry

   - Fix hideous typo in unused register field definition"

[1] https://lore.kernel.org/r/CACT4Y+aAzoJ48Mh1wNYD17pJqyEcDnrxGfApir=-j171TnQXhw@mail.gmail.com
[2] https://lore.kernel.org/r/20201119193819.GA2601289@elver.google.com
[3] https://lore.kernel.org/r/94c76d5e-466a-bc5f-e6c2-a11b65c39f83@redhat.com

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mte: Fix typo in macro definition
  arm64: entry: fix EL1 debug transitions
  arm64: entry: fix NMI {user, kernel}->kernel transitions
  arm64: entry: fix non-NMI kernel<->kernel transitions
  arm64: ptrace: prepare for EL1 irq/rcu tracking
  arm64: entry: fix non-NMI user<->kernel transitions
  arm64: entry: move el1 irq/nmi logic to C
  arm64: entry: prepare ret_to_user for function call
  arm64: entry: move enter_from_user_mode to entry-common.c
  arm64: entry: mark entry code as noinstr
  arm64: mark idle code as noinstr
  arm64: syscall: exit userspace before unmasking exceptions

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull vdpa fixes from Michael Tsirkin:
"A couple of fixes that surfaced at the last minute"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost_vdpa: return -EFAULT if copy_to_user() fails
vdpa: mlx5: fix vdpa/vhost dependencies

Merge tag 'sound-5.10-rc7' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Here are the pending sound fixes for 5.10: all small device-specific
  fixes, and nothing particular stands out, so far"

* tag 'sound-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Add mute LED quirk to yet another HP x360 model
  ALSA: hda/realtek: Fix bass speaker DAC assignment on Asus Zephyrus G14
  ALSA: hda/generic: Add option to enforce preferred_dacs pairs
  ALSA: usb-audio: US16x08: fix value count for level meters
  ALSA: hda/realtek - Add new codec supported for ALC897
  ASoC: rt5682: change SAR voltage threshold
  ASoC: wm_adsp: fix error return code in wm_adsp_load()
  ALSA: hda/realtek: Enable headset of ASUS UX482EG & B9400CEA with ALC294
  ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state
  ALSA: hda/realtek - Fixed Dell AIO wrong sound tone
  ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks

Merge tag 'trace-v5.10-rc6-bootconfig' of git://git./linux/kernel/git/rostedt/linux-trace

Pull bootconfig fixes from Steven Rostedt:
"Have bootconfig size and checksum be little endian

  In case the bootconfig is created on one kind of endian machine, and
  then read on the other kind of endian kernel, the size and checksum
  will be incorrect. Instead, have both the size and checksum always be
  little endian and have the tool and the kernel convert it from little
  endian to or from the host endian"

* tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  docs: bootconfig: Add the endianness of fields
  tools/bootconfig: Store size and checksum in footer as le32
  bootconfig: Load size and checksum in the footer as le32

dpaa_eth: copy timestamp fields to new skb in A-050385 workaround

The timestamp fields should be copied to new skb too in
A-050385 workaround for later TX timestamping handling.

Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Link: https://lore.kernel.org/r/20201201075258.1875-1-yangbo.lu@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ip6_gre: set dev->hard_header_len when using header_ops

syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:

  skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:109!
  Call Trace:
  skb_push+0x10/0x10
  ip6gre_header+0x47/0x1b0
  neigh_connected_output+0xae/0xf0

ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.

Fixes: eb95f52fc72d ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mt76: usb: fix crash on device removal

Currently 'while (q->queued > 0)' loop was removed from mt76u_stop_tx()
code. This causes crash on device removal as we try to cleanup empty
queue:

[   96.495571] kernel BUG at include/linux/skbuff.h:2297!
[   96.498983] invalid opcode: 0000 [#1] SMP PTI
[   96.501162] CPU: 3 PID: 27 Comm: kworker/3:0 Not tainted 5.10.0-rc5+ #11
[   96.502754] Hardware name: LENOVO 20DGS08H00/20DGS08H00, BIOS J5ET48WW (1.19 ) 08/27/2015
[   96.504378] Workqueue: usb_hub_wq hub_event
[   96.505983] RIP: 0010:skb_pull+0x2d/0x30
[   96.507576] Code: 00 00 8b 47 70 39 c6 77 1e 29 f0 89 47 70 3b 47 74 72 17 48 8b 87 c8 00 00 00 89 f6 48 01 f0 48 89 87 c8 00 00 00 c3 31 c0 c3 <0f> 0b 90 0f 1f 44 00 00 53 48 89 fb 48 8b bf c8 00 00 00 8b 43 70
[   96.509296] RSP: 0018:ffffb11b801639b8 EFLAGS: 00010287
[   96.511038] RAX: 000000001c6939ed RBX: ffffb11b801639f8 RCX: 0000000000000000
[   96.512964] RDX: ffffb11b801639f8 RSI: 0000000000000018 RDI: ffff90c64e4fb800
[   96.514710] RBP: ffff90c654551ee0 R08: ffff90c652bce7a8 R09: ffffb11b80163728
[   96.516450] R10: 0000000000000001 R11: 0000000000000001 R12: ffff90c64e4fb800
[   96.519749] R13: 0000000000000010 R14: 0000000000000020 R15: ffff90c64e352ce8
[   96.523455] FS:  0000000000000000(0000) GS:ffff90c96eec0000(0000) knlGS:0000000000000000
[   96.527171] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   96.530900] CR2: 0000242556f18288 CR3: 0000000146a10002 CR4: 00000000003706e0
[   96.534678] Call Trace:
[   96.538418]  mt76x02u_tx_complete_skb+0x1f/0x50 [mt76x02_usb]
[   96.542231]  mt76_queue_tx_complete+0x23/0x50 [mt76]
[   96.546028]  mt76u_stop_tx.cold+0x71/0xa2 [mt76_usb]
[   96.549797]  mt76x0u_stop+0x2f/0x90 [mt76x0u]
[   96.553638]  drv_stop+0x33/0xd0 [mac80211]
[   96.557449]  ieee80211_do_stop+0x558/0x860 [mac80211]
[   96.561262]  ? dev_deactivate_many+0x298/0x2d0
[   96.565101]  ieee80211_stop+0x16/0x20 [mac80211]

Fix that by adding while loop again. We need loop, not just single
check, to clean all pending entries.

Additionally move mt76_worker_disable/enable after !mt76_has_tx_pending()
as we want to tx_worker to run to process tx queues, while we wait for
exactly that.

I was a bit worried about accessing q->queued without lock, but
mt76_worker_disable() -> kthread_park() should assure this value will
be seen updated on other cpus.

Fixes: fe5b5ab52e9d ("mt76: unify queue tx cleanup code")
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126125520.72912-1-stf_xl@wp.pl

iwlwifi: pcie: add some missing entries for AX210

Some subsytem device IDs were missing from the list, so some AX210
devices were not recognized. Add them.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.a06ba7540449.I7390305d088a49c1043c9b489154fe057989c18f@changeid
Link: https://lore.kernel.org/r/20201121003411.9450-1-ikegami.t@gmail.com

iwlwifi: pcie: invert values of NO_160 device config entries

The NO_160 flag specifies if the device doesn't have 160 MHz support,
but we errorneously assumed the opposite. If the flag was set, we
were considering that 160 MHz was supported, but it's actually the
opposite. Fix it by inverting the bits, i.e. NO_160 is 0x1 and 160
is 0x0.

Fixes: d6f2134a3831 ("iwlwifi: add mac/rf types and 160MHz to the device tables")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.375bec857ccb.I83884286b688965293e9810381808039bd7eedae@changeid

iwlwifi: pcie: add one missing entry for AX210

The 0x0024 subsytem device ID was missing from the list, so some AX210
devices were not recognized. Add it.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.308eab4db42c.I3763196cd3f7bb36f3dcabf02ec4e7c4fe859c0f@changeid

iwlwifi: update MAINTAINERS entry

Reflect the fact that the linuxwifi@intel.com address will disappear,
and that neither Emmanuel nor myself are really much involved with
the maintenance these days.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201129151117.a25afe6d2c7f.I8f13a5689dd353825fb2b9bd5b6f0fbce92cb12b@changeid

s390: fix irq state tracing

With commit 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs
tracing") common code calls arch_cpu_idle() with a lockdep state that
tells irqs are on.

This doesn't work very well for s390: psw_idle() will enable interrupts
to wait for an interrupt. As soon as an interrupt occurs the interrupt
handler will verify if the old context was psw_idle(). If that is the
case the interrupt enablement bits in the old program status word will
be cleared.

A subsequent test in both the external as well as the io interrupt
handler checks if in the old context interrupts were enabled. Due to
the above patching of the old program status word it is assumed the
old context had interrupts disabled, and therefore a call to
TRACE_IRQS_OFF (aka trace_hardirqs_off_caller) is skipped. Which in
turn makes lockdep incorrectly "think" that interrupts are enabled
within the interrupt handler.

Fix this by unconditionally calling TRACE_IRQS_OFF when entering
interrupt handlers. Also call unconditionally TRACE_IRQS_ON when
leaving interrupts handlers.

This leaves the special psw_idle() case, which now returns with
interrupts disabled, but has an "irqs on" lockdep state. So callers of
psw_idle() must adjust the state on their own, if required. This is
currently only __udelay_disabled().

Fixes: 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/pci: fix CPU address in MSI for directed IRQ

The directed MSIs are delivered to CPUs whose address is
written to the MSI message address. The current code assumes
that a CPU logical number (as it is seen by the kernel)
is also the CPU address.

The above assumption is not correct, as the CPU address
is rather the value returned by STAP instruction. That
value does not necessarily match the kernel logical CPU
number.

Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

vhost_vdpa: return -EFAULT if copy_to_user() fails

The copy_to_user() function returns the number of bytes remaining to be
copied but this should return -EFAULT to the user.

Fixes: 1b48dc03e575 ("vhost: vdpa: report iova range")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X8c32z5EtDsMyyIL@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

vdpa: mlx5: fix vdpa/vhost dependencies

drivers/vdpa/mlx5/ uses vhost_iotlb*() interfaces, so select
VHOST_IOTLB to make them be built.

However, if VHOST_IOTLB is the only VHOST symbol that is
set/enabled, the object file still won't be built because
drivers/Makefile won't descend into drivers/vhost/ to build it,
so make drivers/Makefile build the needed binary whenever
VHOST_IOTLB is set, like it does for VHOST_RING.

Fixes these build errors:
ERROR: modpost: "vhost_iotlb_itree_next" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined!
ERROR: modpost: "vhost_iotlb_itree_first" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined!

Fixes: 29064bfdabd5 ("vdpa/mlx5: Add support library for mlx5 VDPA implementation")
Fixes: aff90770e54c ("vdpa/mlx5: Fix dependency on MLX5_CORE")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eli Cohen <eli@mellanox.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20201128213905.27409-1-rdunlap@infradead.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

geneve: pull IP header before ECN decapsulation

IP_ECN_decapsulate() and IP6_ECN_decapsulate() assume
IP header is already pulled.

geneve does not ensure this yet.

Fixing this generically in IP_ECN_decapsulate() and
IP6_ECN_decapsulate() is not possible, since callers
pass a pointer that might be freed by pskb_may_pull()

syzbot reported :

BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline]
BUG: KMSAN: uninit-value in INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260
CPU: 1 PID: 8941 Comm: syz-executor.0 Not tainted 5.10.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197
__INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline]
INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260
geneve_rx+0x2103/0x2980 include/net/inet_ecn.h:306
geneve_udp_encap_recv+0x105c/0x1340 drivers/net/geneve.c:377
udp_queue_rcv_one_skb+0x193a/0x1af0 net/ipv4/udp.c:2093
udp_queue_rcv_skb+0x282/0x1050 net/ipv4/udp.c:2167
udp_unicast_rcv_skb net/ipv4/udp.c:2325 [inline]
__udp4_lib_rcv+0x399d/0x5880 net/ipv4/udp.c:2394
udp_rcv+0x5c/0x70 net/ipv4/udp.c:2564
ip_protocol_deliver_rcu+0x572/0xc50 net/ipv4/ip_input.c:204
ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ip_local_deliver+0x583/0x8d0 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:449 [inline]
ip_rcv_finish net/ipv4/ip_input.c:428 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ip_rcv+0x5c3/0x840 net/ipv4/ip_input.c:539
__netif_receive_skb_one_core net/core/dev.c:5315 [inline]
__netif_receive_skb+0x1ec/0x640 net/core/dev.c:5429
process_backlog+0x523/0xc10 net/core/dev.c:6319
napi_poll+0x420/0x1010 net/core/dev.c:6763
net_rx_action+0x35c/0xd40 net/core/dev.c:6833
__do_softirq+0x1a9/0x6fa kernel/softirq.c:298
asm_call_irq_on_stack+0xf/0x20
</IRQ>
__run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline]
run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline]
do_softirq_own_stack+0x6e/0x90 arch/x86/kernel/irq_64.c:77
do_softirq kernel/softirq.c:343 [inline]
__local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:195
local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
rcu_read_unlock_bh include/linux/rcupdate.h:730 [inline]
__dev_queue_xmit+0x3a9b/0x4520 net/core/dev.c:4167
dev_queue_xmit+0x4b/0x60 net/core/dev.c:4173
packet_snd net/packet/af_packet.c:2992 [inline]
packet_sendmsg+0x86f9/0x99d0 net/packet/af_packet.c:3017
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
__sys_sendto+0x9dc/0xc80 net/socket.c:1992
__do_sys_sendto net/socket.c:2004 [inline]
__se_sys_sendto+0x107/0x130 net/socket.c:2000
__x64_sys_sendto+0x6e/0x90 net/socket.c:2000
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20201201090507.4137906-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

inet_ecn: Fix endianness of checksum update when setting ECT(1)

When adding support for propagating ECT(1) marking in IP headers it seems I
suffered from endianness-confusion in the checksum update calculation: In
fact the ECN field is in the *lower* bits of the first 16-bit word of the
IP header when calculating in network byte order. This means that the
addition performed to update the checksum field was wrong; let's fix that.

Fixes: b723748750ec ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040")
Reported-by: Jonathan Morton <chromatix99@gmail.com>
Tested-by: Pete Heist <pete@heistp.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20201130183705.17540-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag '5.10-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Two smb3 fixes for stable"

* tag '5.10-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix potential use-after-free in cifs_echo_request()
cifs: allow syscalls to be restarted in __smb_send_rqst()

Merge tag 'trace-v5.10-rc6' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:

- Use correct timestamp variable for ring buffer write stamp update

- Fix up before stamp and write stamp when crossing ring buffer sub
   buffers

- Keep a zero delta in ring buffer in slow path if cmpxchg fails

- Fix trace_printk static buffer for archs that care

- Fix ftrace record accounting for ftrace ops with trampolines

- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency

- Remove WARN_ON in hwlat tracer that triggers on something that is OK

- Make "my_tramp" trampoline in ftrace direct sample code global

- Fixes in the bootconfig tool for better alignment management

* tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Always check to put back before stamp when crossing pages
  ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
  ftrace: Fix updating FTRACE_FL_TRAMP
  tracing: Fix alignment of static buffer
  tracing: Remove WARN_ON in start_thread()
  samples/ftrace: Mark my_tramp[12]? global
  ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next()
  ring-buffer: Update write stamp with the correct ts
  docs: bootconfig: Update file format on initrd image
  tools/bootconfig: Align the bootconfig applied initrd image size to 4
  tools/bootconfig: Fix to check the write failure correctly
  tools/bootconfig: Fix errno reference after printf()

tipc: fix incompatible mtu of transmission

In commit 682cd3cf946b6
("tipc: confgiure and apply UDP bearer MTU on running links"), we
introduced a function to change UDP bearer MTU and applied this new value
across existing per-link. However, we did not apply this new MTU value at
node level. This lead to packet dropped at link level if its size is
greater than new MTU value.

To fix this issue, we also apply this new MTU value for node level.

Fixes: 682cd3cf946b6 ("tipc: confgiure and apply UDP bearer MTU on running links")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20201130025544.3602-1-hoang.h.le@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

fs: 9p: add generic splice_write file operation

The default splice operations got removed recently, add it back to 9p
with iter_file_splice_write like many other filesystems do.

Link: http://lkml.kernel.org/r/1606837496-21717-1-git-send-email-asmadeus@codewreck.org
Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull vhost fixes from Michael Tsirkin:
"A couple of minor fixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost-vdpa: fix page pinning leakage in error path (rework)
  vringh: fix vringh_iov_push_*() documentation
  vhost scsi: fix lun reset completion handling

net: broadcom CNIC: requires MMU

The CNIC kconfig symbol selects UIO and UIO depends on MMU.
Since 'select' does not follow dependency chains, add the same MMU
dependency to CNIC.

Quietens this kconfig warning:

WARNING: unmet direct dependencies detected for UIO
  Depends on [n]: MMU [=n]
  Selected by [m]:
  - CNIC [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n)

Fixes: adfc5217e9db ("broadcom: Move the Broadcom drivers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Rasesh Mody <rmody@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20201129070843.3859-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'ibmvnic-Bug-fixes-for-queue-descriptor-processing'

Thomas Falcon says:

====================
ibmvnic: Bug fixes for queue descriptor processing

This series resolves a few issues in the ibmvnic driver's
RX buffer and TX completion processing. The first patch
includes memory barriers to synchronize queue descriptor
reads. The second patch fixes a memory leak that could
occur if the device returns a TX completion with an error
code in the descriptor, in which case the respective socket
buffer and other relevant data structures may not be freed
or updated properly.

v3: Correct length of Fixes tags, requested by Jakub Kicinski

v2: Provide more detailed comments explaining specifically what
reads are being ordered, suggested by Michael Ellerman
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Fix TX completion error handling

TX completions received with an error return code are not
being processed properly. When an error code is seen, do not
proceed to the next completion before cleaning up the existing
entry's data structures.

Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Ensure that SCRQ entry reads are correctly ordered

Ensure that received Subordinate Command-Response Queue (SCRQ)
entries are properly read in order by the driver. These queues
are used in the ibmvnic device to process RX buffer and TX completion
descriptors. dma_rmb barriers have been added after checking for a
pending descriptor to ensure the correct descriptor entry is checked
and after reading the SCRQ descriptor to ensure the entire
descriptor is read before processing.

Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fs: 9p: add generic splice_read file operations

The v9fs file operations were missing the splice_read operations, which
breaks sendfile() of files on such a filesystem. I discovered this while
trying to load an eBPF program using iproute2 inside a 'virtme' environment
which uses 9pfs for the virtual file system. iproute2 relies on sendfile()
with an AF_ALG socket to hash files, which was erroring out in the virtual
environment.

Since generic_file_splice_read() seems to just implement splice_read in
terms of the read_iter operation, I simply added the generic implementation
to the file operations, which fixed the error I was seeing. A quick grep
indicates that this is what most other file systems do as well.

Link: http://lkml.kernel.org/r/20201201135409.55510-1-toke@redhat.com
Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>

docs: bootconfig: Add the endianness of fields

Add a description about the endianness of the size and the checksum
fields. Those must be stored as le32 instead of u32. This will allow
us to apply bootconfig to the cross build initrd without caring
the endianness.

Link: https://lkml.kernel.org/r/160583936246.547349.10964204130590955409.stgit@devnote2
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tools/bootconfig: Store size and checksum in footer as le32

Store the size and the checksum fields in the footer as le32
instead of u32. This will allow us to apply bootconfig to the
cross build initrd without caring the endianness.

Link: https://lkml.kernel.org/r/160583935332.547349.5897811300636587426.stgit@devnote2
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

bootconfig: Load size and checksum in the footer as le32

Load the size and the checksum fields in the footer as le32
instead of u32. This will allow us to apply bootconfig to the
cross build initrd without caring the endianness.

Link: https://lkml.kernel.org/r/160583934457.547349.10504070298990791074.stgit@devnote2
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

ring-buffer: Always check to put back before stamp when crossing pages

The current ring buffer logic checks to see if the updating of the event
buffer was interrupted, and if it is, it will try to fix up the before stamp
with the write stamp to make them equal again. This logic is flawed, because
if it is not interrupted, the two are guaranteed to be different, as the
current event just updated the before stamp before allocation. This
guarantees that the next event (this one or another interrupting one) will
think it interrupted the time updates of a previous event and inject an
absolute time stamp to compensate.

The correct logic is to always update the timestamps when traversing to a
new sub buffer.

Cc: stable@vger.kernel.org
Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Merge tag 'linux-can-fixes-for-5.10-20201130' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2020-11-30

The first patch is by me an target the tcan4x5x bindings for the m_can driver.
It fixes the error path in the tcan4x5x_can_probe() function.

The next two patches are by Jeroen Hofstee and makes the lost of arbitration
error counters of sja1000 and the sun4i drivers consistent with the other
drivers.

Zhang Qilong contributes two patch that clean up the error path in the c_can
and kvaser_pciefd drivers.

* tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling
  can: c_can: c_can_power_up(): fix error handling
  can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an error
  can: sja1000: sja1000_err(): don't count arbitration lose as an error
  can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous clk_disable_unprepare()
====================

Link: https://lore.kernel.org/r/20201130125307.218258-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency

DYNAMIC_FTRACE_WITH_DIRECT_CALLS should depend on
DYNAMIC_FTRACE_WITH_REGS since we need ftrace_regs_caller().

Link: https://lkml.kernel.org/r/fc4b257ea8689a36f086d2389a9ed989496ca63a.1606412433.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: 763e34e74bb7d5c ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>