OSDN Git Service
Sara Sharon [Mon, 8 Aug 2016 10:07:01 +0000 (13:07 +0300)]
iwlwifi: mvm: support BAR in reorder buffer
On default queue we will not receive frame release notification,
but the BAR itself.
Upon receiving the BAR driver should look at the NSSN and adjust
window accordingly.
Fixes:
b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Mon, 8 Aug 2016 08:51:24 +0000 (11:51 +0300)]
iwlwifi: mvm: fix DQA AP mode station assumption
There was recently a Full AP mode feature added where hostap adds
the station at auth stage, and not assoc.
However, when running with legacy hostapd, we get the auth response
before station was added, and tx_skb_non_sta fails to allocate
a queue, resulting in a complete failure of association.
Take care of this situation as well.
Add a warning when no valid queue is returned at all and make mvm
drop the packet instead of passing it on.
Refactor the function a bit while at it.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Haim Dreyfuss [Tue, 2 Aug 2016 12:28:23 +0000 (15:28 +0300)]
iwlwifi: check for valid ethernet address provided by OEM
In 9000 family products we added an option to let the OEM fuse the
mac address via registers. If these registers are zeroed we use the OTP
address instead. Make sure that the address provided by the OEM is valid
and, if not, fall back to the OTP address as well.
Fixes: commit
17c867bfe89b ("iwlwifi: add support for getting HW address from CSR")
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Aviya Erenfeld [Sun, 27 Mar 2016 11:53:49 +0000 (14:53 +0300)]
iwlwifi: mvm: add support for MU-MIMO air sniffer
enable MU-MIMO air sniffer if it's supported by the NIC
Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Thu, 4 Aug 2016 06:57:59 +0000 (08:57 +0200)]
iwlwifi: mvm: compare full command ID
When comparing command IDs, the group should be taken
into account so the same command/notification from a
different group doesn't trigger anything unexpected.
Fix this by comparing to the wide ID.
Fixes: commit
1738d60b31d7 ("iwlwifi: mvm: handle RX MPDUs separately")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Wed, 3 Aug 2016 11:08:00 +0000 (14:08 +0300)]
iwlwifi: mvm: cleanup skb queue functions use
Use skb_queue_empty() and not skb_peek_tail() to check for
empty list.
Avoid a redundant check as well - loop will take care of it.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Thu, 4 Aug 2016 07:56:53 +0000 (10:56 +0300)]
iwlwifi: pcie: fix typo in struct name for a000 devices
commit
3cd1980b0cdf ("iwlwifi: pcie: introduce new tfd and tb formats")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Liad Kaufman [Wed, 3 Aug 2016 15:41:27 +0000 (18:41 +0300)]
iwlwifi: mvm: remove variable shadowing
Variable "ac" defined twice. Fix that.
Fixes: commit
93f436e2c7fe ("iwlwifi: mvm: set sta_id in SCD_QUEUE_CONFIG cmd")
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Colin Ian King [Fri, 16 Sep 2016 09:37:31 +0000 (10:37 +0100)]
mwifiex: fix null pointer deference when adapter is null
If adapter is null the error exit path in mwifiex_shutdown_sw is
to down the semaphore sem and print some debug via mwifiex_dbg.
However, passing a NULL adapter to mwifiex_dbg causes a null
pointer deference when accessing adapter->dev. This fix checks
for a null adapter at the start of the function and to exit
without the need to up the semaphore and we also skip the debug
to avoid the null pointer dereference.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Bob Copeland [Wed, 14 Sep 2016 12:42:36 +0000 (08:42 -0400)]
mwifiex: fix error handling in mwifiex_create_custom_regdomain
smatch reports:
sta_cmdresp.c:1053 mwifiex_create_custom_regdomain() warn: possible memory leak of 'regd'
Indeed, mwifiex_create_custom_regdomain() returns NULL in the
case that channel is missing in the TLV without freeing regd.
Moreover, some other error paths in this function return ERR_PTR
values which are assigned without checking to the regd field in
the mwifiex_adapter struct. The latter is only null-checked where
used.
Fix by freeing regd in the error path, and only update
priv->adapter->regd if the returned pointer is valid.
Cc: Amitkumar Karwar <akarwar@marvell.com>
Cc: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Jes Sorensen [Tue, 13 Sep 2016 19:03:15 +0000 (15:03 -0400)]
rtl8xxxu: Implement 8192e specific power down sequence
This powers down the 8192e correctly, or at least to the point where
the firmware will load again, when reloading the driver module.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Kalle Valo [Sat, 17 Sep 2016 15:10:33 +0000 (18:10 +0300)]
Merge tag 'iwlwifi-next-for-kalle-2016-09-15-2' of git://git./linux/kernel/git/iwlwifi/iwlwifi-next
* work for new hardware support continues
* dynamic queue allocation stabilization
* improvements in the MSIx code
* multiqueue support work continues
* new firmware version support
* general cleanups and improvements
David S. Miller [Sat, 17 Sep 2016 14:13:16 +0000 (10:13 -0400)]
Merge branch 'ip_tunnel-collect_md'
Alexei Starovoitov says:
====================
ip_tunnel: add collect_md mode to IPv4/IPv6 tunnels
Similar to geneve, vxlan, gre tunnels implement 'collect metadata' mode
in ipip, ipip6, ip6ip6 tunnels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Thu, 15 Sep 2016 20:00:32 +0000 (13:00 -0700)]
samples/bpf: add comprehensive ipip, ipip6, ip6ip6 test
the test creates 3 namespaces with veth connected via bridge.
First two namespaces simulate two different hosts with the same
IPv4 and IPv6 addresses configured on the tunnel interface and they
communicate with outside world via standard tunnels.
Third namespace creates collect_md tunnel that is driven by BPF
program which selects different remote host (either first or
second namespace) based on tcp dest port number while tcp dst
ip is the same.
This scenario is rough approximation of load balancer use case.
The tests check both traditional tunnel configuration and collect_md mode.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Thu, 15 Sep 2016 20:00:31 +0000 (13:00 -0700)]
samples/bpf: extend test_tunnel_bpf.sh with IPIP test
extend existing tests for vxlan, geneve, gre to include IPIP tunnel.
It tests both traditional tunnel configuration and
dynamic via bpf helpers.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Thu, 15 Sep 2016 20:00:30 +0000 (13:00 -0700)]
ip6_tunnel: add collect_md mode to IPv6 tunnels
Similar to gre, vxlan, geneve tunnels allow IPIP6 and IP6IP6 tunnels
to operate in 'collect metadata' mode.
Unlike ipv4 code here it's possible to reuse ip6_tnl_xmit() function
for both collect_md and traditional tunnels.
bpf_skb_[gs]et_tunnel_key() helpers and ovs (in the future) are the users.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Thu, 15 Sep 2016 20:00:29 +0000 (13:00 -0700)]
ip_tunnel: add collect_md mode to IPIP tunnel
Similar to gre, vxlan, geneve tunnels allow IPIP tunnels to
operate in 'collect metadata' mode.
bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away.
ovs can use it as well in the future (once appropriate ovs-vport
abstractions and user apis are added).
Note that just like in other tunnels we cannot cache the dst,
since tunnel_info metadata can be different for every packet.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Thu, 15 Sep 2016 20:23:26 +0000 (22:23 +0200)]
l2tp: constify net_device_ops structures
Check for net_device_ops structures that are only stored in the netdev_ops
field of a net_device structure. This field is declared const, so
net_device_ops structures that have this property can be declared as const
also.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct net_device_ops i@p = { ... };
@ok@
identifier r.i;
struct net_device e;
position p;
@@
e.netdev_ops = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct net_device_ops e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct net_device_ops i = { ... };
// </smpl>
The result of size on this file before the change is:
text data bss dec hex filename
3401 931 44 4376 1118 net/l2tp/l2tp_eth.o
and after the change it is:
text data bss dec hex filename
3993 347 44 4384 1120 net/l2tp/l2tp_eth.o
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Thu, 15 Sep 2016 20:23:25 +0000 (22:23 +0200)]
dwc_eth_qos: constify net_device_ops structures
Check for net_device_ops structures that are only stored in the netdev_ops
field of a net_device structure. This field is declared const, so
net_device_ops structures that have this property can be declared as const
also.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct net_device_ops i@p = { ... };
@ok@
identifier r.i;
struct net_device e;
position p;
@@
e.netdev_ops = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct net_device_ops e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct net_device_ops i = { ... };
// </smpl>
The result of size on this file before the change is:
text data bss dec hex filename
21623 1316 40 22979 59c3
drivers/net/ethernet/synopsys/dwc_eth_qos.o
and after the change it is:
text data bss dec hex filename
22199 724 40 22963 59b3
drivers/net/ethernet/synopsys/dwc_eth_qos.o
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Thu, 15 Sep 2016 20:23:24 +0000 (22:23 +0200)]
hisilicon: constify net_device_ops structures
Check for net_device_ops structures that are only stored in the netdev_ops
field of a net_device structure. This field is declared const, so
net_device_ops structures that have this property can be declared as const
also.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct net_device_ops i@p = { ... };
@ok@
identifier r.i;
struct net_device e;
position p;
@@
e.netdev_ops = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct net_device_ops e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct net_device_ops i = { ... };
// </smpl>
The result of size on this file before the change is:
text data bss dec hex filename
7995 848 8 8851 2293
drivers/net/ethernet/hisilicon/hip04_eth.o
and after the change it is:
text data bss dec hex filename
8571 256 8 8835 2283
drivers/net/ethernet/hisilicon/hip04_eth.o
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alan Cox [Thu, 15 Sep 2016 17:51:25 +0000 (18:51 +0100)]
llc: switch type to bool as the timeout is only tested versus 0
(As asked by Dave in Februrary)
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 15 Sep 2016 17:18:45 +0000 (10:18 -0700)]
net: l3mdev: Remove netif_index_is_l3_master
No longer used after
e0d56fdd73422 ("net: l3mdev: remove redundant calls")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 15 Sep 2016 17:13:47 +0000 (10:13 -0700)]
net: vrf: Remove RT_FL_TOS
No longer used after
d66f6c0a8f3c0 ("net: ipv4: Remove l3mdev_get_saddr")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 15 Sep 2016 16:33:02 +0000 (09:33 -0700)]
tcp: prepare skbs for better sack shifting
With large BDP TCP flows and lossy networks, it is very important
to keep a low number of skbs in the write queue.
RACK and SACK processing can perform a linear scan of it.
We should avoid putting any payload in skb->head, so that SACK
shifting can be done if needed.
With this patch, we allow to pack ~0.5 MB per skb instead of
the 64KB initially cooked at tcp_sendmsg() time.
This gives a reduction of number of skbs in write queue by eight.
tcp_rack_detect_loss() likes this.
We still allow payload in skb->head for first skb put in the queue,
to not impact RPC workloads.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 17 Sep 2016 13:53:29 +0000 (09:53 -0400)]
Merge tag 'wireless-drivers-next-for-davem-2016-09-15' of git://git./linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.9
Major changes:
iwlwifi
* preparation for new a000 HW continues
* some DQA improvements
* add support for GMAC
* add support for 9460, 9270 and 9170 series
mwifiex
* support random MAC address for scanning
* add HT aggregation support for adhoc mode
* add custom regulatory domain support
* add manufacturing mode support via nl80211 testmode interface
bcma
* support BCM53573 series of wireless SoCs
bitfield.h
* add FIELD_PREP() and FIELD_GET() macros
mt7601u
* convert to use the new bitfield.h macros
brcmfmac
* add support for bcm4339 chip with modalias sdio:c00v02D0d4339
ath10k
* add nl80211 testmode support for 10.4 firmware
* hide kernel addresses from logs using %pK format specifier
* implement NAPI support
* enable peer stats by default
ath9k
* use ieee80211_tx_status_noskb where possible
wil6210
* extract firmware capabilities from the firmware file
ath6kl
* enable firmware crash dumps on the AR6004
ath-current is also merged to fix a conflict in ath10k.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 17 Sep 2016 13:51:48 +0000 (09:51 -0400)]
Merge branch 'mlx5e-order-0'
Tariq Toukan says:
====================
mlx5e Order-0 pages for Striding RQ
In this series, we refactor our Striding RQ receive-flow to always use
fragmented WQEs (Work Queue Elements) using order-0 pages, omitting the
flow that allocates and splits high-order pages which would fragment
and deplete high-order pages in the system.
The first patch gives a slight degradation, but opens the opportunity
to using a simple page-cache mechanism of a fair size.
The page-cache, implemented in patch 3, not only closes the performance
gap but even gives a gain.
In patch 2 we re-organize the code to better manage the calls for
alloc/de-alloc pages in the RX flow.
Series generated against net-next commit:
bed806cb266e "Merge branch 'mlxsw-ethtool'"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Thu, 15 Sep 2016 13:08:38 +0000 (16:08 +0300)]
net/mlx5e: Implement RX mapped page cache for page recycle
Instead of reallocating and mapping pages for RX data-path,
recycle already used pages in a per ring cache.
Performance tests:
The following results were measured on a freshly booted system,
giving optimal baseline performance, as high-order pages are yet to
be fragmented and depleted.
We ran pktgen single-stream benchmarks, with iptables-raw-drop:
Single stride, 64 bytes:
* 4,739,057 - baseline
* 4,749,550 - order0 no cache
* 4,786,899 - order0 with cache
1% gain
Larger packets, no page cross, 1024 bytes:
* 3,982,361 - baseline
* 3,845,682 - order0 no cache
* 4,127,852 - order0 with cache
3.7% gain
Larger packets, every 3rd packet crosses a page, 1500 bytes:
* 3,731,189 - baseline
* 3,579,414 - order0 no cache
* 3,931,708 - order0 with cache
5.4% gain
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Thu, 15 Sep 2016 13:08:37 +0000 (16:08 +0300)]
net/mlx5e: Introduce API for RX mapped pages
Manage the allocation and deallocation of mapped RX pages only
through dedicated API functions.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Thu, 15 Sep 2016 13:08:36 +0000 (16:08 +0300)]
net/mlx5e: Single flow order-0 pages for Striding RQ
To improve the memory consumption scheme, we omit the flow that
demands and splits high-order pages in Striding RQ, and stay
with a single Striding RQ flow that uses order-0 pages.
Moving to fragmented memory allows the use of larger MPWQEs,
which reduces the number of UMR posts and filler CQEs.
Moving to a single flow allows several optimizations that improve
performance, especially in production servers where we would
anyway fallback to order-0 allocations:
- inline functions that were called via function pointers.
- improve the UMR post process.
This patch alone is expected to give a slight performance reduction.
However, the new memory scheme gives the possibility to use a page-cache
of a fair size, that doesn't inflate the memory footprint, which will
dramatically fix the reduction and even give a performance gain.
Performance tests:
The following results were measured on a freshly booted system,
giving optimal baseline performance, as high-order pages are yet to
be fragmented and depleted.
We ran pktgen single-stream benchmarks, with iptables-raw-drop:
Single stride, 64 bytes:
* 4,739,057 - baseline
* 4,749,550 - this patch
no reduction
Larger packets, no page cross, 1024 bytes:
* 3,982,361 - baseline
* 3,845,682 - this patch
3.5% reduction
Larger packets, every 3rd packet crosses a page, 1500 bytes:
* 3,731,189 - baseline
* 3,579,414 - this patch
4% reduction
Fixes:
461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)")
Fixes:
bc77b240b3c5 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Sat, 17 Sep 2016 06:26:01 +0000 (07:26 +0100)]
rxrpc: Make IPv6 support conditional on CONFIG_IPV6
Add CONFIG_AF_RXRPC_IPV6 and make the IPv6 support code conditional on it.
This is then made conditional on CONFIG_IPV6.
Without this, the following can be seen:
net/built-in.o: In function `rxrpc_init_peer':
>> peer_object.c:(.text+0x18c3c8): undefined reference to `ip6_route_output_flags'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2016 08:31:56 +0000 (04:31 -0400)]
Merge branch 'QCA8K'
John Crispin says:
====================
net-next: dsa: add QCA8K support
This series is based on the AR8xxx series posted by Matthieu Olivari in may
2015. The following changes were made since then
* fixed the nitpicks from the previous review
* updated to latest API
* turned it into an mdio device
* added callbacks for fdb, bridge offloading, stp, eee, port status
* fixed several minor issues to the port setup and arp learning
* changed the namespacing as this driver to qca8k
The driver has so far only been tested on qca8337/N. It should work on other QCA
switches such as the qca8327 with minor changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Thu, 15 Sep 2016 14:26:41 +0000 (16:26 +0200)]
net-next: dsa: add new driver for qca8xxx family
This patch contains initial support for the QCA8337 switch. It
will detect a QCA8337 switch, if present and declared in the DT.
Each port will be represented through a standalone net_device interface,
as for other DSA switches. CPU can communicate with any of the ports by
setting an IP@ on ethN interface. Most of the extra callbacks of the DSA
subsystem are already supported, such as bridge offloading, stp, fdb.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Thu, 15 Sep 2016 14:26:40 +0000 (16:26 +0200)]
net-next: dsa: add Qualcomm tag RX/TX handler
Add support for the 2-bytes Qualcomm tag that gigabit switches such as
the QCA8337/N might insert when receiving packets, or that we need
to insert while targeting specific switch ports. The tag is inserted
directly behind the ethernet header.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Thu, 15 Sep 2016 14:26:39 +0000 (16:26 +0200)]
Documentation: devicetree: add qca8k binding
Add device-tree binding for ar8xxx switch families.
Cc: devicetree@vger.kernel.org
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Thu, 15 Sep 2016 02:26:10 +0000 (02:26 +0000)]
net: emac: remove .owner field for driver
Remove .owner field if calls are used which set it automatically.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Thu, 15 Sep 2016 02:25:52 +0000 (02:25 +0000)]
net: emac: remove unnecessary dev_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Thu, 15 Sep 2016 02:24:37 +0000 (02:24 +0000)]
net: dsa: b53: Remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Thu, 15 Sep 2016 02:24:13 +0000 (02:24 +0000)]
net: dsa: bcm_sf2: Fix non static symbol warning
Fixes the following sparse warning:
drivers/net/dsa/bcm_sf2.c:963:19: warning:
symbol 'bcm_sf2_io_ops' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 14 Sep 2016 05:55:05 +0000 (22:55 -0700)]
tcp: fix a stale ooo_last_skb after a replace
When skb replaces another one in ooo queue, I forgot to also
update tp->ooo_last_skb as well, if the replaced skb was the last one
in the queue.
To fix this, we simply can re-use the code that runs after an insertion,
trying to merge skbs at the right of current skb.
This not only fixes the bug, but also remove all small skbs that might
be a subset of the new one.
Example:
We receive segments 2001:3001, 4001:5001
Then we receive 2001:8001 : We should replace 2001:3001 with the big
skb, but also remove 4001:50001 from the queue to save space.
packetdrill test demonstrating the bug
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+0.100 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0.01 < . 1001:2001(1000) ack 1 win 1024
+0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001>
+0.01 < . 1001:3001(2000) ack 1 win 1024
+0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001 1001:3001>
Fixes:
9f5afeae5152 ("tcp: use an RB tree for ooo receive queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yuchung Cheng <ycheng@google.com>
Cc: Yaogong Wang <wygivan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2016 06:23:06 +0000 (02:23 -0400)]
Merge branch 'mediatek-reset-flow'
Sean Wang says:
====================
mediatek: add enhancement into the existing reset flow
Current driver only resets DMA used by descriptor rings which
can't guarantee it can recover all various kinds of fatal
errors, so the patch
1) tries to reset the underlying hardware resource from scratch on
Mediatek SoC required for ethernet running.
2) refactors code in order to the reusability of existing code.
3) considers handling for race condition between the reset flow and
callbacks registered into core driver called about hardware accessing.
4) introduces power domain usage to hardware setup which leads to have
cleanly and completely restore to the state as the initial.
Changes since v1:
- fix the build error with module built causing undefined symbol for
pinctrl_bind_pins, so using pinctrl_select_state instead accomplishes
the pin mux setup during the reset process.
====================
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:21 +0000 (23:13 +0800)]
net: ethernet: mediatek: avoid race condition during the reset process
add the protection of the race condition between
the reset process and hardware access happening
on the related callbacks.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:20 +0000 (23:13 +0800)]
net: ethernet: mediatek: add more resets for internal ethernet circuit block
struct mtk_eth has already contained struct regmap ethsys pointer
to the address range of the internal circuit reset, so we reuse it
to reset more internal blocks on ethernet hardware such as packet
processing engine (PPE) and frame engine (FE) instead of rstc which
deals with FE only.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:19 +0000 (23:13 +0800)]
net: ethernet: mediatek: add the whole ethernet reset into the reset process
1) original driver only resets DMA used by descriptor rings
which can't guarantee it can recover all various kinds of fatal
errors, so the patch tries to reset the underlying hardware
resource from scratch on Mediatek SoC required for ethernet
running, including power, pin mux control, clock and internal
circuits on the ethernet in order to restore into the initial
state which the rebooted machine gives.
2) add state variable inside structure mtk_eth to help distinguish
mtk_hw_init is called between the initialization during boot time
or re-initialization during the reset process.
3) add ge_mode variable inside structure mtk_mac for restoring
the interface mode of the current setup for the target MAC.
4) remove __init attribute from mtk_hw_init definition
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:18 +0000 (23:13 +0800)]
net: ethernet: mediatek: add controlling power domain the ethernet belongs to
introduce power domain control which the digital circuit of
the ethernet belongs to inside the flow of hardware initialization
and deinitialization which helps the entire ethernet hardware block
could restart cleanly and completely as being back to the initial
state when the whole machine reboot.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:17 +0000 (23:13 +0800)]
net: ethernet: mediatek: cleanup error path inside mtk_hw_init
This cleans up the error path inside mtk_hw_init call, causing it able
to exit appropriately when something fails and also includes refactoring
mtk_cleanup call to make the partial logic reusable on the error path.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:16 +0000 (23:13 +0800)]
net: ethernet: mediatek: add mtk_hw_deinit call as the opposite to mtk_hw_init call
grouping things related to the deinitialization of what
mtk_hw_init call does that help to be reused by the reset
process and the error path handling.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:15 +0000 (23:13 +0800)]
net: ethernet: mediatek: refactoring mtk_hw_init to be reused
the existing mtk_hw_init includes hardware and software
initialization inside so that it is slightly hard to reuse
them for the process of the reset recovery, so some splitting
is made here for keeping hardware initializing relevant thing
and the else such as IRQ registration and MDIO initialization
what are all about to the interface of core driver moved to the
other proper place because they have no needs to register IRQ and
re-initialize structure again during the reset process.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Wed, 3 Aug 2016 11:52:56 +0000 (13:52 +0200)]
iwlwifi: mvm: tighten BAID range check
As pointed out by smatch, checking the BAID for just >= INVALID
is a bad idea since only 32 (IWL_MAX_BAID) actually exist. Check
the range for that and print invalid ones in the warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Wed, 3 Aug 2016 11:38:59 +0000 (13:38 +0200)]
iwlwifi: mvm: remove pointless _bh from spinlock in timer
Inside the reorder timer expire function, there's no point in
disabling BHs since it is in BH context. Remove that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Wed, 3 Aug 2016 07:34:39 +0000 (09:34 +0200)]
iwlwifi: mvm: make RSS RX more robust
If the firmware ever decides to send any new/more notifications
to the RSS queues, the driver would currently try to interpret
those as REPLY_RX_MPDU_CMD and, if the notification was small,
access invalid memory.
Prevent that by checking for REPLY_RX_MPDU_CMD explicitly which
allows ignoring unexpected notifications.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sharon Dvir [Wed, 3 Aug 2016 07:55:45 +0000 (10:55 +0300)]
iwlwifi: unify iwl_get_ucode_image() implementations
Avoid multiple implementations.
Signed-off-by: Sharon Dvir <sharon.dvir@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Haim Dreyfuss [Tue, 26 Jul 2016 15:03:07 +0000 (18:03 +0300)]
iwlwifi: pcie: replace possible_cpus() with online_cpus() in MSIX mode
In MSIX mode the number of irq depends on the number of
possible cpus existing on the host.
This cause to bug in case there are offline cores.
Take into account only the online CPUs instead.
Also save it in temporary variable.
Fixes: commit
2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX")
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Tue, 26 Jul 2016 20:22:01 +0000 (23:22 +0300)]
iwlwifi: mvm: bump max API to 26
The driver now support version 26 of the firmware APIs.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Thu, 21 Jul 2016 12:39:29 +0000 (15:39 +0300)]
iwlwifi: pcie: change indentation of iwl_pcie_set_interrupt_capa()
Function is very indented. Go to msi section if needed to avoid
it and by that make the code more readable.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Wei Yongjun [Tue, 12 Jul 2016 11:40:57 +0000 (11:40 +0000)]
iwlwifi: mvm: use setup_timer instead of init_timer and data fields
Use setup_timer function instead of initializing timer with the function
and data fields
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Oren Givon [Thu, 7 Jul 2016 06:11:56 +0000 (09:11 +0300)]
iwlwifi: add the new 8275 series
Add a new config struct for the new 8275 series and add
the first PCI ID for it.
Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Oren Givon [Thu, 7 Jul 2016 07:40:27 +0000 (10:40 +0300)]
iwlwifi: add the new 9560 series
Add a new config struct for the new 9560 series and add
the 4 new PCI IDs for it.
Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Haim Dreyfuss [Sun, 13 Mar 2016 15:51:59 +0000 (17:51 +0200)]
iwlwifi: pcie: Set affinity mask for rx interrupt vectors per cpu
In order to utilize the host's CPUs in the most efficient way
we bind each rx interrupt vector to each CPU on the host.
Each rx interrupt is prioritized to execute only on the designated CPU
rather than any CPU.
Processor affinity takes advantage of the fact that some remnants of
a process that was run on a given processor may remain in that
processor's memory state for example, data in the CPU cache after
another process is run on that CPU. Scheduling that process to execute
on the same processor could result in an efficient use of process by
reducing performance-degrading situations such as cache misses
and parallel processing.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Liad Kaufman [Thu, 7 Jul 2016 10:25:59 +0000 (13:25 +0300)]
iwlwifi: mvm: free reserved queue on STA removal
When a STA is removed in DQA mode, if no traffic went through
its reserved queue, the txq continues to be marked as
reserved and no STA can use it.
Make sure that in such a case the reserved queue is marked
as free when the STA is removed.
Fixes: commit
24afba7690e4 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues")
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Liad Kaufman [Thu, 7 Jul 2016 08:00:26 +0000 (11:00 +0300)]
iwlwifi: mvm: fix pending frames tracking on tx resp
In iwl_mvm_rx_tx_cmd_single(), when checking if a given TID is
aggregated, the driver doesn't check whether or not the queue
itself can be aggregated. For example, a management queue might
be marked as aggregated if TID 0 is aggregated on a (different)
data queue.
Make sure that mgmt frames are sent with TID IWL_TID_NON_QOS,
and in this way make sure no mixups of this sort happen.
Fixes: commit
24afba7690e4 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues")
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Haim Dreyfuss [Sun, 20 Mar 2016 15:57:22 +0000 (17:57 +0200)]
iwlwifi: pcie: Configure shared interrupt vector in MSIX mode
In case the OS provides fewer interrupts than requested, different
causes will share the same interrupt vector as follow:
1.One interrupt less: non rx causes shared with FBQ.
2.Two interrupts less: non rx causes shared with FBQ and RSS.
3.More than two interrupts: we will use fewer RSS queues.
Also make the request depend on the number of online CPUs
instead of possible CPUs.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Sun, 17 Jul 2016 11:24:55 +0000 (14:24 +0300)]
iwlwifi: mvm: support new BA notification response
Support new format. TX response will not be sent anymore,
so all needed data is in the BA response.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Thu, 7 Jul 2016 15:17:45 +0000 (18:17 +0300)]
iwlwifi: pcie: merge iwl_queue and iwl_txq
The original intent was to have the general iwl_queue shared
between RX and TX queues, but it is not the actual status.
Since it is not shared with any struct but iwl_txq, it adds
unnecessary complexity. Merge those structs.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Mon, 4 Jul 2016 11:34:26 +0000 (14:34 +0300)]
iwlwifi: change byte count table for a000 devices
Since TFD was enlarged to 256 bytes, the fetch of the TFD
itself is very expensive.
To make DRAM to SRAM more efficient, bits 12-13 will indicate
the number of 64 byte chunks that should be transferred to
SRAM.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Sun, 26 Jun 2016 10:17:56 +0000 (13:17 +0300)]
iwlwifi: pcie: assign and access a000 TFD & TBs
Previous patch introduced the new formats. This patch
allocates the new structures and adjusts code accordingly.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Mon, 4 Jul 2016 12:40:11 +0000 (15:40 +0300)]
iwlwifi: introduce trans API to get byte count table
In future HW the byte count table address will be configured
by ucode per queue. Add API to expose the byte count table to
the opmode
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
David S. Miller [Fri, 16 Sep 2016 05:57:19 +0000 (01:57 -0400)]
Merge tag 'rxrpc-rewrite-
20160913-2' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Support IPv6
Here is a set of patches that add IPv6 support. They need to be applied on
top of the just-posted miscellaneous fix patches. They are:
(1) Make autobinding of an unconnected socket work when sendmsg() is
called to initiate a client call.
(2) Don't specify the protocol when creating the client socket, but rather
take the default instead.
(3) Use rxrpc_extract_addr_from_skb() in a couple of places that were
doing the same thing manually. This allows the IPv6 address
extraction to be done in fewer places.
(4) Add IPv6 support. With this, calls can be made to IPv6 servers from
userspace AF_RXRPC programs; AFS, however, can't use IPv6 yet as the
RPC calls need to be upgradeable.
====================
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2016 05:52:20 +0000 (01:52 -0400)]
Merge tag 'rxrpc-rewrite-
20160913-1' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Miscellaneous fixes
Here's a set of miscellaneous fix patches. There are a couple of points of
note:
(1) There is one non-fix patch that adjusts the call ref tracking
tracepoint to make kernel API-held refs on calls more obvious. This
is a prerequisite for the patch that fixes prealloc refcounting.
(2) The final patch alters how jumbo packets that partially exceed the
receive window are handled. Previously, space was being left in the
Rx buffer for them, but this significantly hurts performance as the Rx
window can't be increased to match the OpenAFS Tx window size.
Instead, the excess subpackets are discarded and an EXCEEDS_WINDOW ACK
is generated for the first. To avoid the problem of someone trying to
run the kernel out of space by feeding the kernel a series of
overlapping maximal jumbo packets, we stop allowing jumbo packets on a
call if we encounter more than three jumbo packets with duplicate or
excessive subpackets.
====================
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2016 00:49:30 +0000 (20:49 -0400)]
Merge branch 'libcxgb-next'
Varun Prakash says:
====================
iw_cxgb4,cxgbit: remove duplicate code
This patch series removes duplicate code from
iw_cxgb4 and cxgbit by adding common function
definitions in libcxgb.
Please review.
====================
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:06 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_mk_rx_data_ack()
Add cxgb_mk_rx_data_ack() to remove duplicate
code to form CPL_RX_DATA_ACK hardware command.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:05 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_mk_abort_rpl()
Add cxgb_mk_abort_rpl() to remove duplicate
code to form CPL_ABORT_RPL hardware command.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:04 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_mk_abort_req()
Add cxgb_mk_abort_req() to remove duplicate code
to form CPL_ABORT_REQ hardware command.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:03 +0000 (21:24 +0530)]
libcxgb, iw_cxgb4, cxgbit: add cxgb_mk_close_con_req()
Add cxgb_mk_close_con_req() to remove duplicate
code to form CPL_CLOSE_CON_REQ hardware command.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:02 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_mk_tid_release()
Add cxgb_mk_tid_release() to remove duplicate code
to form CPL_TID_RELEASE hardware command.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:01 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_compute_wscale()
Add cxgb_compute_wscale() in libcxgb_cm.h to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:00 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_best_mtu()
Add cxgb_best_mtu() in libcxgb_cm.h to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:53:59 +0000 (21:23 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_is_neg_adv()
Add cxgb_is_neg_adv() in libcxgb_cm.h to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:53:58 +0000 (21:23 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route6()
Add cxgb_find_route6() in libcxgb_cm.c to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:53:57 +0000 (21:23 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()
Add cxgb_find_route() in libcxgb_cm.c to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:53:56 +0000 (21:23 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_get_4tuple()
Add cxgb_get_4tuple() in libcxgb_cm.c to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lance Richardson [Tue, 13 Sep 2016 14:08:54 +0000 (10:08 -0400)]
openvswitch: avoid deferred execution of recirc actions
The ovs kernel data path currently defers the execution of all
recirc actions until stack utilization is at a minimum.
This is too limiting for some packet forwarding scenarios due to
the small size of the deferred action FIFO (10 entries). For
example, broadcast traffic sent out more than 10 ports with
recirculation results in packet drops when the deferred action
FIFO becomes full, as reported here:
http://openvswitch.org/pipermail/dev/2016-March/067672.html
Since the current recursion depth is available (it is already tracked
by the exec_actions_level pcpu variable), we can use it to determine
whether to execute recirculation actions immediately (safe when
recursion depth is low) or defer execution until more stack space is
available.
With this change, the deferred action fifo size becomes a non-issue
for currently failing scenarios because it is no longer used when
there are three or fewer recursions through ovs_execute_actions().
Suggested-by: Pravin Shelar <pshelar@ovn.org>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2016 00:27:30 +0000 (20:27 -0400)]
Merge branch 'cls_flower-port-masks'
Or Gerlitz says:
====================
net/sched: cls_flower: Add ports masks
This series adds the ability to specify tcp/udp ports masks
for TC/flower filter matches.
I also removed an unused fields from the flower keys struct
and clarified the format of the recently added vlan attibutes.
v1--> v2 changes:
* fixes typo in patch #2 title and change log (Sergei)
* added acks provided by Jiri on v1
FWIW, by mistake the cover letter of V1 (but not the patches)
carried V2 tag, hope this doesn't create too much confusion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 15 Sep 2016 12:28:24 +0000 (15:28 +0300)]
net/sched: cls_flower: Specify vlan attributes format in the UAPI header
Specify the format (size and endianess) for the vlan attributes.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 15 Sep 2016 12:28:23 +0000 (15:28 +0300)]
net/sched: cls_flower: Remove an unused field from the filter key structure
Commit
c3f8324188fa "net: Add full IPv6 addresses to flow_keys" added an
unused instance of struct flow_dissector_key_addrs into struct fl_flow_key,
remove it.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 15 Sep 2016 12:28:22 +0000 (15:28 +0300)]
net/sched: cls_flower: Support masking for matching on tcp/udp ports
Add the definitions for src/dst udp/tcp port masks and use
them when setting && dumping the relevant keys.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Regnery [Tue, 13 Sep 2016 10:06:57 +0000 (12:06 +0200)]
alx: fix error handling in __alx_open
In commit
9ee7b683ea63 we moved the enablement of msi interrupts earlier in
alx_init_intr. If there is an error in alx_alloc_rings, __alx_open returns
with an error but msi (or msi-x) interrupts stays enabled. Add a new error
label to disable msi (or msi-x) interrupts.
Fixes:
9ee7b683ea63 ("alx: refactor msi enablement and disablement")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Shenai [Tue, 13 Sep 2016 08:09:24 +0000 (13:39 +0530)]
cxgb4vf: don't offload Rx checksums for IPv6 fragments
The checksum provided by the device doesn't include the L3 headers,
as IPv6 expects
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Tue, 13 Sep 2016 00:13:09 +0000 (20:13 -0400)]
net_sched: Introduce skbmod action
This action is intended to be an upgrade from a usability perspective
from pedit (as well as operational debugability).
Compare this:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action pedit munge offset -14 u8 set 0x02 \
munge offset -13 u8 set 0x15 \
munge offset -12 u8 set 0x15 \
munge offset -11 u8 set 0x15 \
munge offset -10 u16 set 0x1515 \
pipe
to:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action skbmod dmac 02:15:15:15:15:15
Also try to do a MAC address swap with pedit or worse
try to debug a policy with destination mac, source mac and
etherype. Then make few rules out of those and you'll get my point.
In the future common use cases on pedit can be migrated to this action
(as an example different fields in ip v4/6, transports like tcp/udp/sctp
etc). For this first cut, this allows modifying basic ethernet header.
The most important ethernet use case at the moment is when redirecting or
mirroring packets to a remote machine. The dst mac address needs a re-write
so that it doesnt get dropped or confuse an interconnecting (learning) switch
or dropped by a target machine (which looks at the dst mac). And at times
when flipping back the packet a swap of the MAC addresses is needed.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 15 Sep 2016 23:29:53 +0000 (19:29 -0400)]
Merge branch 'bpf-next'
Daniel Borkmann says:
====================
Misc cls_bpf/act_bpf improvements
Two minor improvements to {cls,act}_bpf. For details please see
individual patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 12 Sep 2016 21:38:43 +0000 (23:38 +0200)]
bpf: use skb_at_tc_ingress helper in tcf_bpf
We have a small skb_at_tc_ingress() helper for testing for ingress, so
make use of it. cls_bpf already uses it and so should act_bpf.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 12 Sep 2016 21:38:42 +0000 (23:38 +0200)]
bpf: drop unnecessary test in cls_bpf_classify and tcf_bpf
The skb_mac_header_was_set() test in cls_bpf's and act_bpf's fast-path is
actually unnecessary and can be removed altogether. This was added by
commit
a166151cbe33 ("bpf: fix bpf helpers to use skb->mac_header relative
offsets"), which was later on improved by
3431205e0397 ("bpf: make programs
see skb->data == L2 for ingress and egress"). We're always guaranteed to
have valid mac header at the time we invoke cls_bpf_classify() or tcf_bpf().
Reason is that since
6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
we do skb_reset_mac_header() in __dev_queue_xmit() before we could call
into sch_handle_egress() or any subsequent enqueue. sch_handle_ingress()
always sees a valid mac header as well (things like skb_reset_mac_len()
would badly fail otherwise). Thus, drop the unnecessary test in classifier
and action case.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Mon, 12 Sep 2016 12:19:21 +0000 (15:19 +0300)]
net/sched: act_tunnel_key: Remove rcu_read_lock protection
Remove rcu_read_lock protection from tunnel_key_dump and use
rtnl_dereference, dump operation is protected by rtnl lock.
Also, remove rcu_read_lock from tunnel_key_release and use
rcu_dereference_protected.
Both operations are running exclusively and a writer couldn't modify
t->params while those functions are executed.
Fixes:
54d94fd89d90 ('net/sched: Introduce act_tunnel_key')
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 12 Sep 2016 12:04:57 +0000 (13:04 +0100)]
test_bpf: fix the dummy skb after dissector changes
Commit
d5709f7ab776 ("flow_dissector: For stripped vlan, get vlan
info from skb->vlan_tci") made flow dissector look at vlan_proto
when vlan is present. Since test_bpf sets skb->vlan_tci to ~0
(including VLAN_TAG_PRESENT) we have to populate skb->vlan_proto.
Fixes false negative on test #24:
test_bpf: #24 LD_PAYLOAD_OFF jited:0 175 ret 0 != 42 FAIL (1 times)
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 12 Sep 2016 12:01:50 +0000 (13:01 +0100)]
atm: iphase: fix newline escape and minor tweak to source formatting
The newline escape is incorrect and needs fixing. Also adjust source
formatting / indentation and add { } to trailing else.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sara Sharon [Tue, 5 Jul 2016 14:37:58 +0000 (17:37 +0300)]
iwlwifi: mvm: support new shared memory config API
In a000 devices we have 15 fifos, so in the shared memory
config the number of tx fifos in the array was changed
accordingly.
As it is in the middle of the struct, the parsing code needs
to be duplicated.
To minimize the duplication, do not save variables we never
actually use.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Wed, 13 Jul 2016 13:53:36 +0000 (16:53 +0300)]
iwlwifi: mvm: remove dump of locked registers
Firmware may lock those registers for access. This results
in 9000 devices with a bus stall and an endless loop of 0x5a5a5a.
Don't dump those registers.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Thu, 23 Jun 2016 13:31:40 +0000 (16:31 +0300)]
iwlwifi: pcie: introduce new tfd and tb formats
New hardware supports bigger TFDs and TBs.
Introduce the new formats and adjust defines and code
relying on old format.
Changing the actual TFD allocation is trickier and
deferred to the next patch.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
kbuild test robot [Sun, 10 Jul 2016 21:01:12 +0000 (05:01 +0800)]
iwlwifi: fix semicolon.cocci warnings
drivers/net/wireless/intel/iwlwifi/iwl-io.c:243:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
CC: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Liad Kaufman [Sun, 26 Jun 2016 11:45:12 +0000 (14:45 +0300)]
iwlwifi: mvm: don't free queue after delba in dqa
In DQA mode, a delBA might free the queue although it
shouldn't. Fix that.
Fixes:
cf941e174ee2 ("iwlwifi: mvm: support dqa-mode agg on non-shared queue")
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Thu, 30 Jun 2016 13:14:02 +0000 (16:14 +0300)]
iwlwifi: mvm: call a different txq_enable function
Since the SCD_QUEUE_CFG command was introduced the driver
calls iwl_trans_txq_enable_cfg() with a NULL for scd_cfg
parameter.
This makes the transport avoid writing to the SCD pointers,
since it can cause races with firmware, which is also accessing
the registers.
The transport only updates the write pointer in that case.
Fix a wrong call to iwl_trans_txq_enable() which caused a
scd_cfg parameter to be sent to transport, resulting with an
access to SCD registers.
Fixes:
58f2cc57dc6a ("iwlwifi: mvm: support dqa-mode scd queue redirection")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>