OSDN Git Service
Hans de Goede [Sun, 16 Jan 2022 21:52:01 +0000 (22:52 +0100)]
media: atomisp_gmin_platform: Set ELDO1 to 1.6V on devices with an AXP288 PMIC
Testing on multiple tablet models has shown that Android always uses
1.6V for ELDO1, adjust our code to match.
This also matches with how ELDO1 is used in the DSDTs on these devices,
where for Cherry Trail (ISP2401) based devices ELDO1 is used for an
ACPI power-resource which is named "P16P".
Note on Bay Trail (ISP2400) based devices the power-resource is called
"P15P", which suggests that 1.5V might be a better value there.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-7-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:52:00 +0000 (22:52 +0100)]
media: atomisp_gmin_platform: Add enable-count to gmin_[v1p8|v2p8]_ctrl()
On devices with 2 sensors the 2 sensors may get probed simultaneously
and the v1p8 and v2p8 regulators are ususally shared between the
2 sensors.
This means that the probe() function of sensor 1 may end up calling
gmin_v1p8_ctrl(..., false) turning the regulator off while sensor 2's
probe() function still needs it to be on, causing the probe() of
sensor 2 to sometimes fail.
Fix this by adding an enable-count for both regulators and only
disabling them again when that goes to 0.
Note all this really should be converted to use the standard kernel
regulator framework, I have doing this on my long term TODO list,
this fix is only meant as a temporary workaround for the issue.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-6-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:51:59 +0000 (22:51 +0100)]
media: atomisp_gmin_platform: Fix axp_regulator_set() writing to the wrong register
The second write done in axp_regulator_set() must go to the ctrl_reg which
turns the various regulators on/off. This replaces the second write
writing the sel_reg, which sets the voltage for the regulator, for a
second time with a wrong value.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-5-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:51:58 +0000 (22:51 +0100)]
media: atomisp: Use irci_stable_candrpv_0415_20150423_1753 fw for byt
There is no irci_stable_candrpv_0415_20150521_0458 build for the
isp2400/byt version of the atomisp2. There is however an
irci_stable_candrpv_0415_20150423_1753 version which according to:
https://github.com/intel/ProductionKernelQuilts/blob/master/uefi/cht-m1stable/patches/cam-041
Has the exact same fw ABI, so use that on the isp2400.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-4-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:51:57 +0000 (22:51 +0100)]
media: atomisp: Don't use ifdef ISP2400
IPS2400 is never defined, for ISP2401 builds ISP2401 gets defined and
for ISP2400 nothing gets defined, so any #ifdef ISP2400 checks should
be #ifndef ISP2401 checks instead.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-3-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:51:56 +0000 (22:51 +0100)]
media: atomisp: Don't use ifdef on IS_ISP2401
IS_ISP2401 is a function like macro which is always defined, so it must
not be used together with #ifdef. #ifdef checks should check for
"ISP2401", not "IS_ISP2401".
Link: https://lore.kernel.org/linux-media/20220116215204.307649-2-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sean Young [Sat, 15 Jan 2022 10:19:11 +0000 (11:19 +0100)]
media: lirc: report ir receiver overflow
If the driver reports that the hardware had an overflow, report this to
userspace. It would be nice to know when this happens, and not just get
a long space.
This change has been tested with lircd, ir-ctl, and ir-keytable.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sean Young [Sat, 15 Jan 2022 10:12:35 +0000 (11:12 +0100)]
media: rc-core: rename ir_raw_event_reset to ir_raw_event_overflow
The driver report a reset event when the hardware reports and overflow.
There is no reason to have a generic "reset" event.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sean Young [Thu, 13 Jan 2022 10:20:22 +0000 (11:20 +0100)]
media: lirc: remove unused lirc features
These features have never been implemented by any lirc driver, including
staging or out of tree drivers. The ioctls for these feaures were removed
in commit
d55f09abe24b ("[media] lirc.h: remove several unused ioctls").
So, we can safely remove them.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Tue, 25 Jan 2022 06:44:09 +0000 (07:44 +0100)]
media: aspeed: Correct values for detected timing
Correct timing's fp/sync/bp value based on the information below.
It should be noticed that the calculation formula should be changed
per sync polarity.
The sequence of signal: sync - backporch - video data - frontporch
The following registers start counting from sync's rising edge:
1. VR090: frame edge's left and right
2. VR094: frame edge's top and bottom
3. VR09C: counting from sync's rising edge to falling edge
[Vertical timing]
+--+ +-------------------+ +--+
| | | v i d e o | | |
+--+ +-----+ +-----+ +---+
vsync+--+
frame_top+--------+
frame_bottom+----------------------------+
+-------------------+
| v i d e o |
+--+ +-----+ +-----+ +---+
| | | |
+--+ +--+
vsync+-------------------------------+
frame_top+-----+
frame_bottom+-------------------------+
[Horizontal timing]
+--+ +-------------------+ +--+
| | | v i d e o | | |
+--+ +-----+ +-----+ +---+
hsync+--+
frame_left+--------+
frame_right+----------------------------+
+-------------------+
| v i d e o |
+--+ +-----+ +-----+ +---+
| | | |
+--+ +--+
hsync+-------------------------------+
frame_left+-----+
frame_right+-------------------------+
Ex. 1920x1200@60 whose vsync polarity is negative
VR098:
c4d3efff, VR09C:
04cc001f
v-total = 0x4D3 (VR098[27:16]) = 1235
v-sync = 0x4CC (VR09C[27:16]) = 1228
[hverkuil: drop unused variable mds]
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Tue, 25 Jan 2022 06:44:08 +0000 (07:44 +0100)]
media: aspeed: Use FIELD_GET to improve readability
Use the bitfield macro FIELD_GET, and GENMASK to do the shift and mask in
one go for reg values.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Tue, 25 Jan 2022 06:44:07 +0000 (07:44 +0100)]
media: aspeed: Correct value for h-total-pixels
Previous reg-field, 0x98[11:0], stands for the period of the detected
hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.
Fixes:
d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Wed, 12 Jan 2022 06:07:25 +0000 (07:07 +0100)]
media: aspeed: Fix no complete irq for non-64-aligned width
In ast2500, engine will stop occasionally for 1360x768.
This is a bug which has been addressed, but the workaround is specific
for 1680 only. Here we make it more complete.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Tue, 7 Dec 2021 01:41:47 +0000 (02:41 +0100)]
media: aspeed: add more debug log messages
The new messages are listed as below:
1. jpeg header and capture buffer information
2. information for each irq
3. current capture mode, sync or direct-fetch
4. time consumed for each frame
5. input timing changed information
[hverkuil: use %pad for dma_addr_t to avoid compiler warnings]
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Tue, 7 Dec 2021 01:41:46 +0000 (02:41 +0100)]
media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for log
The debug log level, 0~3, is controlled by module_param, debug.
The higher the value, the more the information.
0: off
1: info
2: debug
3: register operations
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Angus Ainslie [Thu, 20 Jan 2022 11:14:53 +0000 (12:14 +0100)]
media: i2c: dw9714: add optional regulator support
Allow the dw9714 to control a regulator and adjust suspend() and resume()
to support both runtime and system pm.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Bingbu Cao [Thu, 13 Jan 2022 00:18:48 +0000 (01:18 +0100)]
media: ov2740: identify module after subdev initialisation
The module identifying will try to get the sub device data which
will be ready after sub device initialisation, so if try to use the
subdev data to deference the client will cause NULL pointer
dereference, this patch move the module identification after
v4l2_i2c_subdev_init() to fix this issue, it also fixes duplicate
module idendification.
Fixes:
ada2c4f54d0a ("media: ov2740: support device probe in non-zero ACPI D state")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Philippe Cornu [Thu, 13 Jan 2022 17:19:21 +0000 (18:19 +0100)]
media: MAINTAINERS: update drm/stm drm/sti and cec/sti maintainers
Add Alain as sti maintainer for both drm/sti & cec/sti.
Add Raphaƫl as stm maintainer for drm/stm.
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Benjamin Gaignard [Thu, 13 Jan 2022 17:19:20 +0000 (18:19 +0100)]
media: MAINTAINERS: Update Benjamin Gaignard maintainer status
Update Benjamin Gaignard address and remove it from no more maintained
drivers.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Thu, 13 Jan 2022 20:51:50 +0000 (21:51 +0100)]
media: i2c: max9286: Implement media entity .link_validate() operation
The MAX9286 has sink pads, so it should implement .link_validate(). Do
so.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
kernel test robot [Wed, 19 Jan 2022 05:24:47 +0000 (06:24 +0100)]
media: ov5693: fix returnvar.cocci warnings
drivers/media/i2c/ov5693.c:953:5-8: Unneeded variable: "ret". Return "0" on line 985
Remove unneeded variable used to store return value.
Generated by: scripts/coccinelle/misc/returnvar.cocci
[Sakari Ailus: Improved subject]
CC: Daniel Scally <djrscally@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
kernel test robot [Wed, 19 Jan 2022 05:24:42 +0000 (06:24 +0100)]
media: ov5693: fix boolconv.cocci warnings
drivers/media/i2c/ov5693.c:989:46-51: WARNING: conversion to bool not needed here
drivers/media/i2c/ov5693.c:991:46-51: WARNING: conversion to bool not needed here
Remove unneeded conversion to bool
Semantic patch information:
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Generated by: scripts/coccinelle/misc/boolconv.cocci
[Sakari Ailus: Improved subject]
CC: Daniel Scally <djrscally@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jimmy Su [Wed, 12 Jan 2022 05:42:55 +0000 (06:42 +0100)]
media: i2c: Add ov08d10 camera sensor driver
Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor.
This camera sensor is using the i2c bus for control and the
csi-2 bus for data.
The following features are supported:
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- supported resolution:
- 3280x2460 at 30 FPS
- 3264x2448 at 30 FPS
- 1632x1224 at 30 FPS
- supported bayer order output:
- SGRBG10 as default
- SBGGR10 at flip mode
- SRGGB10 at mirror mode
- SGBRG10 at flip + mirror mode
Signed-off-by: Jimmy Su <jimmy.su@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Shawn Tu [Tue, 11 Jan 2022 15:08:27 +0000 (16:08 +0100)]
media: hi847: Add support for Hi-847 sensor
Add a V4L2 sub-device driver for Hynix Hi-847 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- vflip/hflip control support
- keep SGRBG10 Bayer order output
- support following resolutions:
+ 3264x2448 at 30FPS
+ 1632x1224 at 60FPS
[Sakari Ailus: Wrapped a few long lines.]
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sakari Ailus [Wed, 19 Jan 2022 08:44:59 +0000 (09:44 +0100)]
media: ov8865: Fix indentation in set_selection callback
Fixed wrong indentation in set_selection callback.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sakari Ailus [Mon, 10 Jan 2022 16:16:51 +0000 (17:16 +0100)]
media: ov5648: Don't pack controls struct
Don't pack the driver specific struct containing control pointers. This
lead to potential alignment issues when working with the pointers.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
e43ccb0a045f ("media: i2c: Add support for the OV5648 image sensor")
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sakari Ailus [Mon, 10 Jan 2022 14:53:12 +0000 (15:53 +0100)]
media: v4l: Avoid unaligned access warnings when printing 4cc modifiers
Pointers V4L2 pixelformat and dataformat fields in a few packed structs
are directly passed to printk family of functions. This could result in an
unaligned access albeit no such possibility appears to exist at the
moment i.e. this clang warning appears to be a false positive.
Address the warning by copying the pixelformat or dataformat value to a
local variable first.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
e927e1e0f0dd ("v4l: ioctl: Use %p4cc printk modifier to print FourCC codes")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Janusz Krzysztofik [Mon, 4 May 2020 17:10:12 +0000 (19:10 +0200)]
media: ov6650: Fix missing frame interval enumeration support
According to v4l2-compliance utility, a video device which supports
V4L2_CAP_TIMEPERFRAME via .vidioc_s_parm() operation should also
support .vidioc_enum_frameintervals(). If the former is implemented
via a call to v4l2_s_parm_cap() which in turn calls a subdevice
.s_frame_interval() pad operation, the video device may want to
implement the latter by passing frame interval enumeration requests to
the subdevice .enum_frame_intervals() video operation. If that
operation is not supported by the subdevice and failure is returned by
the video device, the compliance test issues a warning.
Implement the missing pad operation. Enumerate frame intervals
possible to be set via pixel clock adjustment, as implemented by
.s_frame_interval(), but not exceeding a reasonable maximum of 1
second.
[Sakari Ailus: Rebased on mbus config pad op patches]
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Janusz Krzysztofik [Sun, 3 May 2020 22:06:18 +0000 (00:06 +0200)]
media: ov6650: Fix crop rectangle affected by set format
According to subdevice interface specification found in V4L2 API
documentation, set format pad operations should not affect image
geometry set in preceding image processing steps. Unfortunately, that
requirement is not respected by the driver implementation of set format
as it was not the case when that code was still implementing a pair of
now obsolete .s_mbus_fmt() / .try_mbus_fmt() video operations before
they have been merged and reused as an implementation of .set_fmt() pad
operation by commit
717fd5b4907a ("[media] v4l2: replace try_mbus_fmt
by set_fmt").
Exclude non-compliant crop rectangle adjustments from set format try,
as well as a call to .set_selection() from set format active processing
path, so only frame scaling is applied as needed and crop rectangle is
no longer modified.
[Sakari Ailus: Rebase on subdev state patches]
Fixes:
717fd5b4907a ("[media] v4l2: replace try_mbus_fmt by set_fmt")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Janusz Krzysztofik [Sun, 3 May 2020 22:06:17 +0000 (00:06 +0200)]
media: ov6650: Add try support to selection API operations
Try requests are now only supported by format processing pad operations
implemented by the driver. The driver selection API operations
currently respond to them with -EINVAL. While that is correct, it
constraints video device drivers to not use subdevice cropping at all
while processing user requested active frame size, otherwise their set
try format results might differ from active. As a consequence, we
can't fix set format pad operation as not to touch crop rectangle since
that would affect users not being able to set arbitrary frame sizes.
Moreover, without a working set try selection support we are not able
to use pad config crop rectangle as a reference while processing set
try format requests.
Implement missing try selection support. Moreover, as it will be now
possible to maintain the pad config crop rectangle via selection API,
start using it instead of the active one as a reference while
processing set try format requests.
is_unscaled_ok() helper, now also called from set selection operation,
has been just moved up in the source file to avoid a prototype, with no
functional changes.
[Sakari Ailus: Rebase on subdev state patches]
Fixes:
717fd5b4907a ("[media] v4l2: replace try_mbus_fmt by set_fmt")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Janusz Krzysztofik [Sun, 3 May 2020 22:06:16 +0000 (00:06 +0200)]
media: ov6650: Fix set format try processing path
According to subdevice interface specification found in V4L2 API
documentation, set format pad operations should not affect image
geometry set in preceding image processing steps. Unfortunately, that
requirement is not respected by the driver implementation of set format
as it was not the case when that code was still implementing a pair of
now obsolete .s_mbus_fmt() / .try_mbus_fmt() video operations before
they have been merged and reused as an implementation of .set_fmt() pad
operation by commit
717fd5b4907a ("[media] v4l2: replace try_mbus_fmt
by set_fmt").
In case of set format active processing path the issue can be fixed
easily by excluding a call to set active selection from that path. That
will effectively limit frame size processing to optimal frame scaling
against active crop rectangle without touching it. Users can just call
set active selection themselves to obtain desired frame size. However,
set format try processing path needs more work.
First of all, the driver should be extended with set try selection
support. Lack of it constraints video device drivers to not use
subdevice cropping at all while processing user requested active frame
size, otherwise their set try format results might differ from active.
Next, set format try processing path should use pad config crop
rectangle as a reference, not the active one as it does now. That
issue can be resolved easily as soon as set try selection support is
added to the driver so pad config crop rectangle can be maintained by
users via selection API.
Last, set format try processing path should give the same results as
active in respect to active vs. pad config crop rectangle geometry.
Both rectangles should be either not touched by set format (that's what
we are going to achieve) or modified the same way, otherwise users
won't be able to obtain equal results from both paths while iterating
through set format and set selection operations in order to obtain
desired frame size.
We can't begin with modifying set format pad operation as not to touch
crop rectangle since that depends on availability of set try selection
for symmetry. Neither can we begin with adding set try selection since
that in turn depends on equal handling of active and pad config crop
rectangles by set format. We can either implement all required
modifications in a single patch, or begin with fixing current set
format try processing path to appropriately handle pad config crop
rectangle. This patch implements the latter approach as believed to
be more readable.
Move crop rectangle adjustments code from a helper (the former
implementation of .s_fmt(), now called from set format active
processing path) to the body of set format pad operation function
where it can be also used for processing try requests for symmetry with
active ones. As the helper no longer processes frame geometry, only
frame format and half scaling, simplify its API accordingly and update
its users.
Moreover, extract code that applies crop rectangle hardware limits
(now a part of .set_selection() operation which is called from set
format active processing path) to a new helper and call that helper
from set format try processing path as well for symmetry with active.
[Sakari Ailus: Rebase on subdev state patches]
Fixes:
717fd5b4907a ("[media] v4l2: replace try_mbus_fmt by set_fmt")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 3 Jan 2022 16:24:10 +0000 (17:24 +0100)]
media: v4l2-fwnode: Move bus config structure to v4l2_mediabus.h
To prepare for usage of the v4l2_fwnode_bus_* data structures to
describe bus configuration in the subdev .get_mbus_config() operation,
rename the structures with a v4l2_mbus_config_ prefix instead of
v4l2_fwnode_bus_, and move them to v4l2_mediabus.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 3 Jan 2022 16:24:09 +0000 (17:24 +0100)]
media: v4l2-subdev: Drop .set_mbus_config() operation
The .set_mbus_config() operation is deprecated, and nothing in the
kernel uses it. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 3 Jan 2022 16:24:08 +0000 (17:24 +0100)]
media: i2c: ov6650: Drop implementation of .set_mbus_config()
The subdev .set_mbus_config() operation is deprecated. No code in the
kernel calls it, so drop its implementation from the ov6650 driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 3 Jan 2022 16:24:07 +0000 (17:24 +0100)]
media: pxa_camera: Drop usage of .set_mbus_config()
The subdev .set_mbus_config() operation is deprecated and will be
dropped. Drop its usage from the pxa_camera driver, querying the sensor
bus configuration instead of setting it. Only the ov6650 driver supports
the operation, any platform that experiences issues with this change
should update the ov6650 configuration to match what pxa_camera
supports.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Robert Foss [Mon, 6 Dec 2021 15:18:11 +0000 (16:18 +0100)]
media: dt-bindings: media: camss: Remove clock-lane property
The clock-lanes property is not programmable by the hardware,
and as such it should not be exposed in the dt-binding.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:05:08 +0000 (08:05 +0100)]
media: memory: mtk-smi: Get rid of mtk_smi_larb_get/put
After adding device_link between the iommu consumer and smi-larb,
the pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. we can get rid of mtk_smi_larb_get/put.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:05:07 +0000 (08:05 +0100)]
media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the vcodec devices call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
CC: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:05:06 +0000 (08:05 +0100)]
media: drm/mediatek: Get rid of mtk_smi_larb_get/put
MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the drm device calls the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
CC: CK Hu <ck.hu@mediatek.com>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yongqiang Niu [Mon, 17 Jan 2022 07:05:05 +0000 (08:05 +0100)]
media: drm/mediatek: Add pm runtime support for ovl and rdma
Prepare for smi cleaning up "mediatek,larb".
Display use the dispsys device to call pm_rumtime_get_sync before.
This patch add pm_runtime_xx with ovl and rdma device whose nodes has
"iommus" property, then display could help pm_runtime_get for smi via
ovl or rdma device.
(Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync)
CC: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:05:04 +0000 (08:05 +0100)]
media: mtk-mdp: Get rid of mtk_smi_larb_get/put
MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the mdp device calls the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:05:03 +0000 (08:05 +0100)]
media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
MediaTek IOMMU has already added device_link between the consumer
and smi-larb device. If the jpg device calls the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
After removing the larb_get operations, then mtk_jpeg_clk_init is
also unnecessary. Remove it too.
CC: Xia Jiang <xia.jiang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Rick Chang <rick.chang@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:05:02 +0000 (08:05 +0100)]
media: iommu/mediatek: Add device_link between the consumer and the larb devices
MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
smi-larb, then connect with smi-common.
M4U
|
smi-common
|
-------------
| | ...
| |
larb1 larb2
| |
vdec venc
When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.
Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.
This patch adds device_link between the consumer and the larbs.
When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.
2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.
Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.
Meanwhile, Currently we don't have a device connect with 2 larbs at the
same time. Disallow this case, print the error log.
[1] https://lore.kernel.org/linux-mediatek/
1564213888.22908.4.camel@mhfsdcap03/
[2] https://lore.kernel.org/patchwork/patch/
1086569/
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Acked-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:05:01 +0000 (08:05 +0100)]
media: iommu/mediatek: Add probe_defer for smi-larb
Prepare for adding device_link.
The iommu consumer should use device_link to connect with the
smi-larb(supplier). then the smi-larb should run before the iommu
consumer. Here we delay the iommu driver until the smi driver is ready,
then all the iommu consumers always are after the smi driver.
When there is no this patch, if some consumer drivers run before
smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
device_link_add, then device_links_driver_bound will use WARN_ON
to complain that the link_status of supplier is not right.
device_is_bound may be more elegant here. but it is not allowed to
EXPORT from https://lore.kernel.org/patchwork/patch/
1334670/.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Acked-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:05:00 +0000 (08:05 +0100)]
media: iommu/mediatek: Return ENODEV if the device is NULL
The platform device is created at:
of_platform_default_populate_init: arch_initcall_sync
->of_platform_populate
->of_platform_device_create_pdata
When entering our probe, all the devices should be already created.
if it is null, means NODEV. Currently we don't get the fail case.
It's a minor fix, no need add fixes tags.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:04:59 +0000 (08:04 +0100)]
media: iommu/mediatek-v1: Free the existed fwspec if the master dev already has
When the iommu master device enters of_iommu_xlate, the ops may be
NULL(iommu dev is defered), then it will initialize the fwspec here:
[<
c0c9c5bc>] (dev_iommu_fwspec_set) from [<
c06bda80>]
(iommu_fwspec_init+0xbc/0xd4)
[<
c06bd9c4>] (iommu_fwspec_init) from [<
c06c0db4>]
(of_iommu_xlate+0x7c/0x12c)
[<
c06c0d38>] (of_iommu_xlate) from [<
c06c10e8>]
(of_iommu_configure+0x144/0x1e8)
BUT the mtk_iommu_v1.c only supports arm32, the probing flow still is a bit
weird. We always expect create the fwspec internally. otherwise it will
enter here and return fail.
static int mtk_iommu_create_mapping(struct device *dev,
struct of_phandle_args *args)
{
...
if (!fwspec) {
....
} else if (dev_iommu_fwspec_get(dev)->ops != &mtk_iommu_ops) {
>>>>>>>>>>Enter here. return fail.<<<<<<<<<<<<
return -EINVAL;
}
...
}
Thus, Free the existed fwspec if the master device already has fwspec.
This issue is reported at:
https://lore.kernel.org/linux-mediatek/trinity-
7d9ebdc9-4849-4d93-bfb5-
429dcb4ee449-
1626253158870@3c-app-gmx-bs01/
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:04:58 +0000 (08:04 +0100)]
media: dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need this property.
And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hsin-Yi Wang [Mon, 6 Dec 2021 13:04:24 +0000 (14:04 +0100)]
media: dt-bindings: mediatek: Add mediatek, mt8183-jpgenc compatible
Add mediatek,mt8183-jpgenc compatible to binding document.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hsin-Yi Wang [Mon, 6 Dec 2021 13:04:23 +0000 (14:04 +0100)]
media: dt-bindings: mediatek: convert mtk jpeg decoder/encoder to yaml
Convert mediatek jpeg decoder and encoder bindings to yaml.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Chen-Yu Tsai [Fri, 7 Jan 2022 09:34:55 +0000 (10:34 +0100)]
media: hantro: jpeg: Remove open-coded size in quantization table code
The quantization tables used in the Hantro JPEG encoder driver are
implicitly sized by the data they contain, but the loop that scales
the tables based on the compression quality hard codes the size to
64. No code exists to check whether the two actually match.
Commit
85bdcb7eaae7 ("media: hantro: Write the quantization tables in
proper order") introduced two new tables, with sizes hardcoded to 64,
but still no checking if all the sizes are the same.
Commit
41479adb5e52 ("media: hantro: Avoid global variable for jpeg
quantization tables") added the macro JPEG_QUANT_SIZE, but only the
newly added fields used this.
This has resulted in code scattered with magic numbers and array sizes
that happen to match up, without any sort of sanity checking to enforce
it.
Drop the hard-coded array sizes, replace the magic loop count with
a proper JPEG_QUANT_SIZE macro, and add BUILD_BUG_ON()s to check
that all the table sizes match up.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Chen-Yu Tsai [Fri, 7 Jan 2022 09:34:54 +0000 (10:34 +0100)]
media: hantro: output encoded JPEG content directly to capture buffers
Now that the JPEG header length is aligned with bus access boundaries,
the JPEG encoder can output to the capture buffers directly without
going through a bounce buffer.
Do just that, and get rid of all the bounce buffer related code.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Chen-Yu Tsai [Fri, 7 Jan 2022 09:34:53 +0000 (10:34 +0100)]
media: hantro: Implement V4L2_CID_JPEG_ACTIVE_MARKER control
The Hantro JPEG encoder driver adds various segments to the JPEG header.
While it would be quite complicated to make these segments selectable
to userspace, given that the driver has to fill in various fields in
these segments, and also take care of alignment, it would be nice if
the driver could signal to userspace what segments are included.
Implement the V4L2_CID_JPEG_ACTIVE_MARKER control, and make it read
only so that it always returns the set of segments that the driver adds.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Chen-Yu Tsai [Fri, 7 Jan 2022 09:34:52 +0000 (10:34 +0100)]
media: hantro: jpeg: Add COM segment to JPEG header to align image scan
The JPEG header size is not 64-bit aligned. This makes the driver
require a bounce buffer for the encoded JPEG image scan output.
Add a COM (comment) segment to the JPEG header so that the header size
is a multiple of 64 bits. This will then allow dropping the use of the
bounce buffer, and instead have the hardware write out to the capture
buffer directly.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Chen-Yu Tsai [Fri, 7 Jan 2022 09:34:51 +0000 (10:34 +0100)]
media: hantro: jpeg: Add JFIF APP0 segment to JPEG encoder output
While the V4L2_PIX_FMT_JPEG format doesn't specify any requirements for
the APP0 or APP1 segments, it would be nice if the output is JFIF
compliant. While some programs can read JPEG streams that aren't, some
guess work is involved.
Add the standard JFIF APP0 segment to the JPEG header, so that the JPEG
encoder output is JFIF compliant.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Chen-Yu Tsai [Fri, 7 Jan 2022 09:34:50 +0000 (10:34 +0100)]
media: hantro: Support cropping visible area for encoders
Encoders typically operate on macroblocks. Thus their output or coded
resolution is constrained to multiples of macroblocks. For frame sizes
not aligned to macroblocks, cropping is needed to limit the visible
area of the frame.
Add support for cropping on the output (source) side for encoders,
using the selection API.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Chen-Yu Tsai [Fri, 7 Jan 2022 09:34:49 +0000 (10:34 +0100)]
media: hantro: Fix overfill bottom register field name
The Hantro H1 hardware can crop off pixels from the right and bottom of
the source frame. These are controlled with the H1_REG_IN_IMG_CTRL_OVRFLB
and H1_REG_IN_IMG_CTRL_OVRFLR in the H1_REG_IN_IMG_CTRL register.
The ChromeOS kernel driver that this was based on incorrectly added the
_D4 suffix H1_REG_IN_IMG_CTRL_OVRFLB. This field crops the bottom of the
input frame, and the number is _not_ divided by 4. [1]
Correct the name to avoid confusion when crop support with the selection
API is added.
[1] https://chromium.googlesource.com/chromiumos/third_party/kernel/+/refs/ \
heads/chromeos-4.19/drivers/staging/media/hantro/hantro_h1_vp8_enc.c#377
Fixes:
775fec69008d ("media: add Rockchip VPU JPEG encoder driver")
Fixes:
a29add8c9bb2 ("media: rockchip/vpu: rename from rockchip to hantro")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Benjamin Mugnier [Thu, 6 Jan 2022 15:09:40 +0000 (16:09 +0100)]
media: MAINTAINERS: Change maintainers for mipid02 driver
Mickael left the company and is not willing to keep maintainership.
Add Sylvain and myself as maintainers of mipid02 driver.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Christophe JAILLET [Sat, 27 Nov 2021 14:46:39 +0000 (15:46 +0100)]
media: v4l2-dev: Use non-atomic bitmap API when applicable
No concurrent access is possible when a bitmap is local to a function.
So prefer the non-atomic '__[set|clear]_bit()' functions to save a few
cycles.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Martin Kepplinger [Mon, 22 Nov 2021 07:27:08 +0000 (08:27 +0100)]
media: dt-bindings: media: document imx8mq support for imx7-csi
Add the fsl,imx8mq-csi compatible string to the bindings for nxp,imx7-csi.
The i.MX8MQ SoC contains the same CSI bridge controller as the i.MX7.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Martin Kepplinger [Mon, 22 Nov 2021 07:27:07 +0000 (08:27 +0100)]
media: imx: imx7-media-csi: add support for imx8mq
Modeled after the NXP driver mx6s_capture.c that this driver is based on,
imx8mq needs different settings for the baseaddr_switch mechanism. Define
the needed bits and set that for imx8mq.
Without these settings, the system will "sometimes" hang completely when
starting to stream (the interrupt will never be called).
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jiasheng Jiang [Thu, 13 Jan 2022 06:59:28 +0000 (07:59 +0100)]
media: meson: vdec: potential dereference of null pointer
As the possible failure of the kzalloc(), the 'new_ts' could be NULL
pointer.
Therefore, it should be better to check it in order to avoid the
dereference of the NULL pointer.
Also, the caller esparser_queue() needs to deal with the return value of
the amvdec_add_ts().
Fixes:
876f123b8956 ("media: meson: vdec: bring up to compliance")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Mirela Rabulea [Wed, 12 Jan 2022 19:12:08 +0000 (20:12 +0100)]
media: imx-jpeg: Prevent decoding NV12M jpegs into single-planar buffers
If the application queues an NV12M jpeg as output buffer, but then
queues a single planar capture buffer, the kernel will crash with
"Unable to handle kernel NULL pointer dereference" in mxc_jpeg_addrs,
prevent this by finishing the job with error.
Signed-off-by: Mirela Rabulea <mirela.rabulea@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jean-Michel Hautbois [Wed, 12 Jan 2022 16:10:12 +0000 (17:10 +0100)]
media: doc: pixfmt-yuv: Fix V4L2-PIX-FMT-Y10P format
This packed grey-scale image format has a depth of 10 bits per pixel.
Every four consecutive pixels are packed into 5 bytes. Each of the first
4 bytes contain the 8 high order bits of the pixels, and the 5th byte
contains the 2 least significants bits of each pixel, in the same order.
The first two bytes are not corresponding to this description, fix it.
Fixes:
af4f45057695 ("media: doc: pixfmt-yuv: Move all luma-only YUV formats to common file")
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Daniel Lundberg Pedersen [Wed, 12 Jan 2022 12:28:09 +0000 (13:28 +0100)]
media: docs: v4l2grab.c.rst: change unintended assignment
Example should be comparing errno to EINTR instead of doing assignment.
Signed-off-by: Daniel Lundberg Pedersen <dlp@qtec.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Miaoqian Lin [Wed, 12 Jan 2022 11:05:54 +0000 (12:05 +0100)]
media: coda: Fix missing put_device() call in coda_get_vdoa_data
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes:
e7f3c5481035 ("[media] coda: use VDOA for un-tiling custom macroblock format")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Tue, 11 Jan 2022 00:23:14 +0000 (01:23 +0100)]
media: coda: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Tue, 11 Jan 2022 00:23:13 +0000 (01:23 +0100)]
media: mtk-vpu: Drop unnecessary call to platform_get_resource()
mtk_vpu_probe() calls platform_get_resource(pdev, IORESOURCE_IRQ, ..)
to check if IRQ resource exists and later calls
platform_get_irq(pdev, ..) to get the actual IRQ.
This patch drops an unnecessary call to platform_get_resource() and
checks the return value of platform_get_irq(pdev, ..) to make sure the
IRQ line is valid.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Tue, 11 Jan 2022 00:23:12 +0000 (01:23 +0100)]
media: s5p-g2d: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Åukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Tue, 11 Jan 2022 00:23:11 +0000 (01:23 +0100)]
media: exynos4-is: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Tue, 11 Jan 2022 00:23:09 +0000 (01:23 +0100)]
media: marvell-ccic: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Tue, 11 Jan 2022 00:23:08 +0000 (01:23 +0100)]
media: exynos-gsc: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Tue, 11 Jan 2022 00:23:06 +0000 (01:23 +0100)]
media: stm32-dma2d: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Tue, 11 Jan 2022 00:23:05 +0000 (01:23 +0100)]
media: s5p-mfc: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Tue, 11 Jan 2022 00:23:04 +0000 (01:23 +0100)]
media: bdisp: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Tue, 11 Jan 2022 00:23:03 +0000 (01:23 +0100)]
media: camss: Use platform_get_irq_byname() to get the interrupt
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Tue, 11 Jan 2022 00:23:02 +0000 (01:23 +0100)]
media: vsp1: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Fri, 17 Dec 2021 14:30:18 +0000 (15:30 +0100)]
media: i2c: max9286: Use "maxim,gpio-poc" property
The 'maxim,gpio-poc' property is used when the remote camera
power-over-coax is controlled by one of the MAX9286 gpio lines,
to instruct the driver about which line to use and what the line
polarity is.
Add to the max9286 driver support for parsing the newly introduced
property and use it if available in place of the usual supply, as it is
not possible to establish one as consumer of the max9286 gpio
controller.
If the new property is present, no gpio controller is registered and
'poc-supply' is ignored.
In order to maximize code re-use, break out the max9286 gpio handling
function so that they can be used by the gpio controller through the
gpio-consumer API, or directly by the driver code.
Wrap the power up and power down routines to their own function to
be able to use either the gpio line directly or the supply. This will
make it easier to control the remote camera power at run time.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Thu, 16 Dec 2021 16:34:34 +0000 (17:34 +0100)]
media: dt-bindings: media: max9286: Define 'maxim,gpio-poc'
Define a new vendor property in the maxim,max9286 binding schema.
The new property allows to declare that the remote camera
power-over-coax is controlled by one of the MAX9286 gpio lines.
As it is currently not possible to establish a regulator as consumer
of the MAX9286 gpio controller for this purpose, the property allows to
declare that the camera power is controlled by the MAX9286 directly.
The property accepts a gpio-index (0 or 1) and one line polarity
flag as defined by dt-bindings/gpio/gpio.h.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Thu, 16 Dec 2021 16:34:33 +0000 (17:34 +0100)]
media: dt-bindings: media: max9286: Re-indent example
The dt-bindings examples are usually indented with 4 spaces.
The maxim,max9286 schema has the example indented with only
2 spaces, re-indent it.
Cosmetic change only.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sean Young [Sat, 15 Jan 2022 10:08:14 +0000 (11:08 +0100)]
media: mtk-cir: simplify code
Re-write without unnecessary shifts.
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sean Young [Thu, 13 Jan 2022 20:53:51 +0000 (21:53 +0100)]
media: mtk-cir: remove superfluous ir_raw_event_reset()
This IR receiver has two limitations:
1) Any IR pulse or space longer than 12ms will be truncated to 12ms
2) Any pulses/spaces after the first 68 are lost
ir_raw_event_reset() won't help here. If the IR cannot be decoded, any
decoder should reset itself, and if it does not, this is a bug in the
decoder.
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sean Young [Fri, 14 Jan 2022 14:24:27 +0000 (15:24 +0100)]
media: mtk-cir: reduce message end to fix nec repeats
The ir receiver generates an interrupt with the IR data, once a space of
at least ok_count is has been seen. Currently this is about 110ms; when
holding down a button on a nec remote, no such space is seen until the
button is released. This means nothing happens until you release the
button.
The sample rate is fixed at 46us, so the maximum space that can be
encoded is about 12ms. So, the set ok_count above that at 23ms.
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sean Young [Thu, 13 Jan 2022 11:29:01 +0000 (12:29 +0100)]
media: lirc: simplify gap calculation
When a driver reports a timeout, no more IR activity will be reported
until the next pulse. A space is inserted between the timeout and the
next pulse, based on ktime.
The timeout reports already a duration, so this duration should not be
added to the gap. Otherwise there is no change to the functionality.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Peiwei Hu [Wed, 29 Dec 2021 01:15:18 +0000 (02:15 +0100)]
media: ir_toy: free before error exiting
Fix leak in error path.
Signed-off-by: Peiwei Hu <jlu.hpw@foxmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:55 +0000 (05:10 +0100)]
media: mtk-vcodec: Remove mtk_vcodec_release_enc_pm
There are only two lines in mtk_vcodec_release_enc_pm, using
pm_runtime_disable and put_device instead directly.
Move pm_runtime_enable outside mtk_vcodec_release_enc_pm to symmetry with
pm_runtime_disable, after that, rename mtk_vcodec_init_enc_pm to *_clk
since it only has clock operations now.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:54 +0000 (05:10 +0100)]
media: mtk-vcodec: Remove mtk_vcodec_release_dec_pm
There are only two lines in mtk_vcodec_release_dec_pm, using
pm_runtime_disable and put_device instead directly.
Move pm_runtime_enable outside mtk_vcodec_init_dec_pm to symmetry with
pm_runtime_disable, after that, rename mtk_vcodec_init_dec_pm to *_clk
since it only has clock operations now.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:53 +0000 (05:10 +0100)]
media: mtk-vcodec: Use codec type to separate different hardware
There is just one core thread, in order to separate different
hardware, using codec type to separeate it in scp driver.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:52 +0000 (05:10 +0100)]
media: mtk-vcodec: Add core dec and dec end ipi msg
Add core dec and dec end ipi msg:
AP_IPIMSG_DEC_CORE/AP_IPIMSG_DEC_CORE_END.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:51 +0000 (05:10 +0100)]
media: mtk-vcodec: Support 34bits dma address for vdec
Use the dma_set_mask_and_coherent helper to set vdec
DMA bit mask to support 34bits iova space(16GB) that
the mt8192 iommu HW support.
Whole the iova range separate to 0~4G/4G~8G/8G~12G/12G~16G,
regarding which iova range VDEC actually locate, it
depends on the dma-ranges property of vdec dtsi node.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:50 +0000 (05:10 +0100)]
media: mtk-vcodec: Add work queue for core hardware decode
Add work queue to process core hardware information.
First, get lat_buf from message queue, then call core
hardware of each codec(H264/VP9/AV1) to decode, finally
puts lat_buf back to the message.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Steve Cho <stevecho@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:49 +0000 (05:10 +0100)]
media: mtk-vcodec: Add new interface to lock different hardware
For add new hardware, not only need to lock lat hardware, also
need to lock core hardware in case of different instance start
to decoder at the same time.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:48 +0000 (05:10 +0100)]
media: mtk-vcodec: Generalize power and clock on/off interfaces
Generalizes power and clock on/off interfaces to support different
hardware.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:47 +0000 (05:10 +0100)]
media: mtk-vcodec: Add msg queue feature for lat and core architecture
For lat and core architecture, lat thread will send message to core
thread when lat decode done. Core hardware will use the message
from lat to decode, then free message to lat thread when decode done.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:46 +0000 (05:10 +0100)]
media: mtk-vcodec: Add irq interface for multi hardware
Adds irq interface for multi hardware.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:45 +0000 (05:10 +0100)]
media: mtk-vcodec: Use pure single core for MT8183
Separates different architecture for hardware: pure_sin_core
and lat_sin_core. MT8183 is pure single core. Uses .hw_arch to
distinguish.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:44 +0000 (05:10 +0100)]
media: mtk-vcodec: Add to support multi hardware decode
There are more than two hardwares for decoder: LAT0, LAT1 and CORE. In
order to manage these hardwares, register each hardware as independent
platform device for the larbs are different.
Each hardware module controls its own information which includes
interrupt/power/clocks/registers.
Calling of_platform_populate in parent device, and use subdev_bitmap to
record whether the hardwares are registered.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Steve Cho <stevecho@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:43 +0000 (05:10 +0100)]
media: mtk-vcodec: Support MT8192
Adds MT8192's compatible "mediatek,mt8192-vcodec-dec".
Adds MT8192's device private data mtk_lat_sig_core_pdata.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:42 +0000 (05:10 +0100)]
media: dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for mt8192
Adds decoder dt-bindings for mt8192.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:41 +0000 (05:10 +0100)]
media: dt-bindings: media: mtk-vcodec: Separate video encoder and decoder dt-bindings
Separate decoder and encoder document for the dts are big difference.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 13 Jan 2022 04:10:40 +0000 (05:10 +0100)]
media: mtk-vcodec: export decoder pm functions
When mtk vcodec decoder is build as a module, we need to export
mtk-vcodec-dec pm functions to make them visible by the other components.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>