git.osdn.net Git - uclinux-h8/linux.git/log

GTP: add support for flow based tunneling API

Following patch add support for flow based tunneling API
to send and recv GTP tunnel packet over tunnel metadata API.
This would allow this device integration with OVS or eBPF using
flow based tunneling APIs.

Signed-off-by: Pravin B Shelar <pbshelar@fb.com>
Link: https://lore.kernel.org/r/20210110070021.26822-1-pbshelar@fb.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_cubic: use memset and offsetof init

In bictcp_reset(), use memset and offsetof instead of = 0.

Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Link: https://lore.kernel.org/r/1610597696-128610-1-git-send-email-yejune.deng@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: tap: check vlan with eth_type_vlan() method

Replace some checks for ETH_P_8021Q and ETH_P_8021AD in
drivers/net/tap.c with eth_type_vlan.

Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Link: https://lore.kernel.org/r/20210115023238.4681-1-dong.menglong@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: netlink: use &w->w in nfc_genl_rcv_nl_event

Use the struct member w of the struct urelease_work directly instead of
casting it.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Link: https://lore.kernel.org/r/f0ed86d6d54ac0834bd2e161d172bf7bb5647cf7.1610683862.git.geliangtang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'configuring-congestion-watermarks-on-ocelot-switch-using-devlink-sb'

Vladimir Oltean says:

====================
Configuring congestion watermarks on ocelot switch using devlink-sb

In some applications, it is important to create resource reservations in
the Ethernet switches, to prevent background traffic, or deliberate
attacks, from inducing denial of service into the high-priority traffic.

These patches give the user some knobs to turn. The ocelot switches
support per-port and per-port-tc reservations, on ingress and on egress.
The resources that are monitored are packet buffers (in cells of 60
bytes each) and frame references.

The frames that exceed the reservations can optionally consume from
sharing watermarks which are not per-port but global across the switch.
There are 10 sharing watermarks, 8 of them are per traffic class and 2
are per drop priority.

I am configuring the hardware using the best of my knowledge, and mostly
through trial and error. Same goes for devlink-sb integration. Feedback
is welcome.
====================

Link: https://lore.kernel.org/r/20210115021120.3055988-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: configure watermarks using devlink-sb

Using devlink-sb, we can configure 12/16 (the important 75%) of the
switch's controlling watermarks for congestion drops, and we can monitor
50% of the watermark occupancies (we can monitor the reservation
watermarks, but not the sharing watermarks, which are exposed as pool
sizes).

The following definitions can be made:

SB_BUF=0 # The devlink-sb for frame buffers
SB_REF=1 # The devlink-sb for frame references
POOL_ING=0 # The pool for ingress traffic. Both devlink-sb instances
# have one of these.
POOL_EGR=1 # The pool for egress traffic. Both devlink-sb instances
# have one of these.

Editing the hardware watermarks is done in the following way:
BUF_xxxx_I is accessed when sb=$SB_BUF and pool=$POOL_ING
REF_xxxx_I is accessed when sb=$SB_REF and pool=$POOL_ING
BUF_xxxx_E is accessed when sb=$SB_BUF and pool=$POOL_EGR
REF_xxxx_E is accessed when sb=$SB_REF and pool=$POOL_EGR

Configuring the sharing watermarks for COL_SHR(dp=0) is done implicitly
by modifying the corresponding pool size. By default, the pool size has
maximum size, so this can be skipped.

devlink sb pool set pci/0000:00:00.5 sb $SB_BUF pool $POOL_ING \
size 129840 thtype static

Since by default there is no buffer reservation, the above command has
maxed out BUF_COL_SHR_I(dp=0).

Configuring the per-port reservation watermark (P_RSRV) is done in the
following way:

devlink sb port pool set pci/0000:00:00.5/0 sb $SB_BUF \
pool $POOL_ING th 1000

The above command sets BUF_P_RSRV_I(port 0) to 1000 bytes. After this
command, the sharing watermarks are internally reconfigured with 1000
bytes less, i.e. from 129840 bytes to 128840 bytes.

Configuring the per-port-tc reservation watermarks (Q_RSRV) is done in
the following way:

for tc in {0..7}; do
devlink sb tc bind set pci/0000:00:00.5/0 sb 0 tc $tc \
type ingress pool $POOL_ING \
th 3000
done

The above command sets BUF_Q_RSRV_I(port 0, tc 0..7) to 3000 bytes.
The sharing watermarks are again reconfigured with 24000 bytes less.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: initialize watermarks to sane defaults

This is meant to be a gentle introduction into the world of watermarks
on ocelot. The code is placed in ocelot_devlink.c because it will be
integrated with devlink, even if it isn't right now.

My first step was intended to be to replicate the default configuration
of the congestion watermarks programatically, since they are now going
to be tuned by the user.

But after studying and understanding through trial and error how they
work, I now believe that the configuration used out of reset does not do
justice to the word "reservation", since the sum of all reservations
exceeds the total amount of resources (otherwise said, all reservations
cannot be fulfilled at the same time, which means that, contrary to the
reference manual, they don't guarantee anything).

As an example, here's a dump of the reservation watermarks for frame
buffers, for port 0 (for brevity, the ports 1-6 were omitted, but they
have the same configuration):

BUF_Q_RSRV_I(port 0, prio 0) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 1) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 2) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 3) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 4) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 5) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 6) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 7) = max 3000 bytes

Otherwise said, every port-tc has an ingress reservation of 3000 bytes,
and there are 7 ports in VSC9959 Felix (6 user ports and 1 CPU port).
Concentrating only on the ingress reservations, there are, in total,
8 [traffic classes] x 7 [ports] x 3000 [bytes] = 168,000 bytes of memory
reserved on ingress.
But, surprise, Felix only has 128 KB of packet buffer in total...
A similar thing happens with Seville, which has a larger packet buffer,
but also more ports, and the default configuration is also overcommitted.

This patch disables the (apparently) bogus reservations and moves all
resources to the shared area. This way, real reservations can be set up
by the user, using devlink-sb.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: register devlink ports

Add devlink integration into the mscc_ocelot switchdev driver. All
physical ports (i.e. the unused ones as well) except the CPU port module
at ocelot->num_phys_ports are registered with devlink, and that requires
keeping the devlink_port structure outside struct ocelot_port_private,
since the latter has a 1:1 mapping with a struct net_device (which does
not exist for unused ports).

Since we use devlink_port_type_eth_set to link the devlink port to the
net_device, we can as well remove the .ndo_get_phys_port_name and
.ndo_get_port_parent_id implementations, since devlink takes care of
retrieving the port name and number automatically, once
.ndo_get_devlink_port is implemented.

Note that the felix DSA driver is already integrated with devlink by
default, since that is a thing that the DSA core takes care of. This is
the reason why these devlink stubs were put in ocelot_net.c and not in
the common library. It is also the reason why ocelot::devlink is a
pointer and not a full structure embedded inside struct ocelot: because
the mscc_ocelot driver allocates that by itself (as the container of
struct ocelot, in fact), but in the case of felix, it is DSA who
allocates the devlink, and felix just propagates the pointer towards
struct ocelot.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: delete unused ocelot_set_cpu_port prototype

This is a leftover of commit 69df578c5f4b ("net: mscc: ocelot: eliminate
confusion between CPU and NPI port") which renamed that function.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: export NUM_TC constant from felix to common switch lib

We should be moving anything that isn't DSA-specific or SoC-specific out
of the felix DSA driver, and into the common mscc_ocelot switch library.

The number of traffic classes is one of the aspects that is common
between all ocelot switches, so it belongs in the library.

This patch also makes seville use 8 TX queues, and therefore enables
prioritization via the QOS_CLASS field in the NPI injection header.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: felix: perform teardown in reverse order of setup

In general it is desirable that cleanup is the reverse process of setup.
In this case I am not seeing any particular issue, but with the
introduction of devlink-sb for felix, a non-obvious decision had to be
made as to where to put its cleanup method. When there's a convention in
place, that decision becomes obvious.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: felix: reindent struct dsa_switch_ops

The devlink function pointer names are super long, and they would break
the alignment. So reindent the existing ops now by adding one tab.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: add ops for devlink-sb

Switches that care about QoS might have hardware support for reserving
buffer pools for individual ports or traffic classes, and configuring
their sizes and thresholds. Through devlink-sb (shared buffers), this is
all configurable, as well as their occupancy being viewable.

Add the plumbing in DSA for these operations.

Individual drivers still need to call devlink_sb_register() with the
shared buffers they want to expose. A helper was not created in DSA for
this purpose (unlike, say, dsa_devlink_params_register), since in my
opinion it does not bring any benefit over plainly calling
devlink_sb_register() directly.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: add ops for decoding watermark threshold and occupancy

We'll need to read back the watermark thresholds and occupancy from
hardware (for devlink-sb integration), not only to write them as we did
so far in ocelot_port_set_maxlen. So introduce 2 new functions in struct
ocelot_ops, similar to wm_enc, and implement them for the 3 supported
mscc_ocelot switches.

Remove the INUSE and MAXUSE unpacking helpers for the QSYS_RES_STAT
register, because that doesn't scale with the number of switches that
mscc_ocelot supports now. They have different bit widths for the
watermarks, and we need function pointers to abstract that difference
away.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: auto-detect packet buffer size and number of frame references

Instead of reading these values from the reference manual and writing
them down into the driver, it appears that the hardware gives us the
option of detecting them dynamically.

The number of frame references corresponds to what the reference manual
notes, however it seems that the frame buffers are reported as slightly
less than the books would indicate. On VSC9959 (Felix), the books say it
should have 128KB of packet buffer, but the registers indicate only
129840 bytes (126.79 KB). Also, the unit of measurement for FREECNT from
the documentation of all these devices is incorrect (taken from an older
generation). This was confirmed by Younes Leroul from Microchip support.

Not having anything better to do with these values at the moment* (this
will change soon), let's just print them.

*The frame buffer size is, in fact, used to calculate the tail dropping
watermarks.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge https://git./linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2021-01-16

1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support,
   that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman.

2) Add support for using kernel module global variables (__ksym externs in BPF
   programs) retrieved via module's BTF, from Andrii Nakryiko.

3) Generalize BPF stackmap's buildid retrieval and add support to have buildid
   stored in mmap2 event for perf, from Jiri Olsa.

4) Various fixes for cross-building BPF sefltests out-of-tree which then will
   unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker.

5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann.

6) Clean up driver's XDP buffer init and split into two helpers to init per-
   descriptor and non-changing fields during processing, from Lorenzo Bianconi.

7) Minor misc improvements to libbpf & bpftool, from Ian Rogers.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
  perf: Add build id data in mmap2 event
  bpf: Add size arg to build_id_parse function
  bpf: Move stack_map_get_build_id into lib
  bpf: Document new atomic instructions
  bpf: Add tests for new BPF atomic operations
  bpf: Add bitwise atomic instructions
  bpf: Pull out a macro for interpreting atomic ALU operations
  bpf: Add instructions for atomic_[cmp]xchg
  bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
  bpf: Move BPF_STX reserved field check into BPF_STX verifier code
  bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
  bpf: x86: Factor out a lookup table for some ALU opcodes
  bpf: x86: Factor out emission of REX byte
  bpf: x86: Factor out emission of ModR/M for *(reg + off)
  tools/bpftool: Add -Wall when building BPF programs
  bpf, libbpf: Avoid unused function warning on bpf_tail_call_static
  selftests/bpf: Install btf_dump test cases
  selftests/bpf: Fix installation of urandom_read
  selftests/bpf: Move generated test files to $(TEST_GEN_FILES)
  selftests/bpf: Fix out-of-tree build
  ...
====================

Link: https://lore.kernel.org/r/20210116012922.17823-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ks8851: remove definition of DEBUG

Defining DEBUG should only be done in development.
So remove DEBUG.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20210115153128.131026-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

neighbor: remove definition of DEBUG

Defining DEBUG should only be done in development.
So remove DEBUG.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210114212917.48174-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

gianfar: remove definition of DEBUG

Defining DEBUG should only be done in development.
So remove DEBUG.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210113215603.1721958-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: set configure_vlan_while_not_filtering to true by default

As explained in commit 54a0ed0df496 ("net: dsa: provide an option for
drivers to always receive bridge VLANs"), DSA has historically been
skipping VLAN switchdev operations when the bridge wasn't in
vlan_filtering mode, but the reason why it was doing that has never been
clear. So the configure_vlan_while_not_filtering option is there merely
to preserve functionality for existing drivers. It isn't some behavior
that drivers should opt into. Ideally, when all drivers leave this flag
set, we can delete the dsa_port_skip_vlan_configuration() function.

New drivers always seem to omit setting this flag, for some reason. So
let's reverse the logic: the DSA core sets it by default to true before
the .setup() callback, and legacy drivers can turn it off. This way, new
drivers get the new behavior by default, unless they explicitly set the
flag to false, which is more obvious during review.

Remove the assignment from drivers which were setting it to true, and
add the assignment to false for the drivers that didn't previously have
it. This way, it should be easier to see how many we have left.

The following drivers: lan9303, mv88e6060 were skipped from setting this
flag to false, because they didn't have any VLAN offload ops in the
first place.

The Broadcom Starfighter 2 driver calls the common b53_switch_alloc and
therefore also inherits the configure_vlan_while_not_filtering=true
behavior.

Also, print a message through netlink extack every time a VLAN has been
skipped. This is mildly annoying on purpose, so that (a) it is at least
clear that VLANs are being skipped - the legacy behavior in itself is
confusing, and the extack should be much more difficult to miss, unlike
kernel logs - and (b) people have one more incentive to convert to the
new behavior.

No behavior change except for the added prints is intended at this time.

$ ip link add br0 type bridge vlan_filtering 0
$ ip link set sw0p2 master br0
[   60.315148] br0: port 1(sw0p2) entered blocking state
[   60.320350] br0: port 1(sw0p2) entered disabled state
[   60.327839] device sw0p2 entered promiscuous mode
[   60.334905] br0: port 1(sw0p2) entered blocking state
[   60.340142] br0: port 1(sw0p2) entered forwarding state
Warning: dsa_core: skipping configuration of VLAN. # This was the pvid
$ bridge vlan add dev sw0p2 vid 100
Warning: dsa_core: skipping configuration of VLAN.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210115231919.43834-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netxen_nic: switch from 'pci_' to 'dma_' API

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'netxen_get_minidump_template()' GFP_KERNEL can
be used because its only caller, ' netxen_setup_minidump(()' already uses
it and no lock is acquired in the between.

When memory is allocated in other function in 'netxen_nic_ctx.c' GFP_KERNEL
can be used because the call chain already uses GFP_KERNEL and no lock is
taken in the between.
The call chain is:
  netxen_nic_attach()
    --> netxen_alloc_sw_resources()          : already uses GFP_KERNEL
    --> netxen_alloc_hw_resources()
      --> nx_fw_cmd_create_rx_ctx()
      --> nx_fw_cmd_create_tx_ctx()

When memory is allocated in 'netxen_init_dummy_dma()' GFP_KERNEL can be
used because its only call chain already uses it and no lock is acquired in
the between.
The call chain is:
  --> netxen_start_firmware
    --> netxen_request_firmware()
      --> request_firmware()
        --> _request_firmware(()
          --> fw_get_filesystem_firmware()
            --> __getname()                  : already uses GFP_KERNEL
    --> netxen_init_dummy_dma()

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20210113202519.487672-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-dsa-mv88e6xxx-lag-fixes'

Tobias Waldekranz says:

====================
net: dsa: mv88e6xxx: LAG fixes

The kernel test robot kindly pointed out that Global 2 support in
mv88e6xxx is optional.

This also made me realize that we should verify that the hardware
actually supports LAG offloading before trying to configure it.
====================

Link: https://lore.kernel.org/r/20210115125259.22542-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mv88e6xxx: Only allow LAG offload on supported hardware

There are chips that do have Global 2 registers, and therefore trunk
mapping/mask tables are not available. Refuse the offload as early as
possible on those devices.

Fixes: 57e661aae6a8 ("net: dsa: mv88e6xxx: Link aggregation support")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mv88e6xxx: Provide dummy implementations for trunk setters

Support for Global 2 registers is build-time optional. In the case
where it was not enabled the build would fail as no "dummy"
implementation of these functions was available.

Fixes: 57e661aae6a8 ("net: dsa: mv88e6xxx: Link aggregation support")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'arrow-speedchips-xrs700x-dsa-driver'

George McCollister says:

====================
Arrow SpeedChips XRS700x DSA Driver

This series adds a DSA driver for the Arrow SpeedChips XRS 7000 series
of HSR/PRP gigabit switch chips.

The chips use Flexibilis IP.
More information can be found here:
https://www.flexibilis.com/products/speedchips-xrs7000/

The switches have up to three RGMII ports and one MII port and are
managed via mdio or i2c. They use a one byte trailing tag to identify
the switch port when in managed mode so I've added a tag driver which
implements this.

This series contains minimal DSA functionality which may be built upon
in future patches. The ultimate goal is to add HSR and PRP
(IEC 62439-3 Clause 5 & 4) offloading with integration into net/hsr.
====================

Link: https://lore.kernel.org/r/20210114195734.55313-1-george.mccollister@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: net: dsa: add bindings for xrs700x switches

Add documentation and an example for Arrow SpeedChips XRS7000 Series
single chip Ethernet switches.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: add Arrow SpeedChips XRS700x driver

Add a driver with initial support for the Arrow SpeedChips XRS7000
series of gigabit Ethernet switch chips which are typically used in
critical networking applications.

The switches have up to three RGMII ports and one RMII port.
Management to the switches can be performed over i2c or mdio.

Support for advanced features such as PTP and
HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and
may be added at a later date.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dsa: add support for Arrow XRS700x tag trailer

Add support for Arrow SpeedChips XRS700x single byte tag trailer. This
is modeled on tag_trailer.c which works in a similar way.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'add-further-dt-configuration-for-at803x-phys'

Russell King says:

====================
Add further DT configuration for AT803x PHYs

This patch series adds the ability to configure the SmartEEE feature
in AT803x PHYs. SmartEEE defaults to enabled on these PHYs, and has
a history of causing random sporadic link drops at Gigabit speeds.

There appears to be two solutions to this. There is the approach that
Freescale adopted early on, which is to disable the SmartEEE feature.
However, this loses the power saving provided by EEE. Another solution
was found by Jon Nettleton is to increase the Tw parameter for Gigabit
links.

This patch series adds support for both approaches, by adding a boolean:

qca,disable-smarteee

if one wishes to disable SmartEEE, and two properties to configure the
SmartEEE Tw parameters:

qca,smarteee-tw-us-100m
qca,smarteee-tw-us-1g

Sadly, the PHY quirk I merged a while back for AT8035 on iMX6 is broken
- rather than disabling SmartEEE mode, it enables it.

The addition of these properties will be sent to the appropriate
platform maintainers - although for SolidRun platforms, we only make use
of "qca,smarteee-tw-us-1g".
====================

Link: https://lore.kernel.org/r/20210114104455.GP1551@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: at803x: add support for configuring SmartEEE

SmartEEE for the atheros phy was deemed buggy by Freescale and commits
were added to disable it for their boards.

In initial testing, SolidRun found that the default settings were
causing disconnects but by increasing the Tw buffer time we could allow
enough time for all parts of the link to come out of a low power state
and function properly without causing a disconnect. This allows us to
have functional power savings of between 300 and 400mW, rather than
disabling the feature altogether.

This commit adds support for disabling SmartEEE and configuring the Tw
parameters for 1G and 100M speeds.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt: ar803x: document SmartEEE properties

The SmartEEE feature of Atheros AR803x PHYs can cause the link to
bounce. Add DT properties to allow SmartEEE to be disabled, and to
allow the Tw parameters for 100M and 1G links to be configured.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'perf: Add mmap2 build id support'

Jiri Olsa says:

====================

hi,
adding the support to have buildid stored in mmap2 event,
so we can bypass the final perf record hunt on build ids.

This patchset allows perf to record build ID in mmap2 event,
and adds perf tooling to store/download binaries to .debug
cache based on these build IDs.

Note that the build id retrieval code is stolen from bpf
code, where it's been used (together with file offsets)
to replace IPs in user space stack traces. It's now added
under lib directory.

v7 changes:
  - included only missing kernel patches, cc-ed bpf@vger and
    rebased on bpf-next/master [Alexei]

v6 changes:
  - last 4 patches rebased Arnaldo's perf/core

v5 changes:
  - rebased on latest perf/core
  - several patches already pulled in
  - fixed trace+probe_vfs_getname.sh output redirection
  - fixed changelogs [Arnaldo]
  - renamed BUILD_ID_SIZE to BUILD_ID_SIZE_MAX [Song]

v4 changes:
  - fixed typo in changelog [Namhyung]
  - removed force_download bool from struct dso_store_data,
    because it's not used  [Namhyung]

v3 changes:
  - added acks
  - removed forgotten debug code [Arnaldo]
  - fixed readlink termination [Ian]
  - fixed doc for --debuginfod=URLs [Ian]
  - adopted kernel's memchr_inv function and used
    it in build_id__is_defined function [Arnaldo]

On recording server:

  - on the recording server we can run record with --buildid-mmap
    option to store build ids in mmap2 events:

    # perf record --buildid-mmap
    ^C[ perf record: Woken up 2 times to write data ]
    [ perf record: Captured and wrote 0.836 MB perf.data ]

  - it stores nothing to ~/.debug cache:

    # find ~/.debug
    find: ‘/root/.debug’: No such file or directory

  - and still reports properly:

    # perf report --stdio
    ...
    99.82%  swapper          [kernel.kallsyms]  [k] native_safe_halt
     0.03%  swapper          [kernel.kallsyms]  [k] finish_task_switch
     0.02%  swapper          [kernel.kallsyms]  [k] __softirqentry_text_start
     0.01%  kcompactd0       [kernel.kallsyms]  [k] _raw_spin_unlock_irqrestore
     0.01%  ksoftirqd/6      [kernel.kallsyms]  [k] slab_free_freelist_hook
     0.01%  kworker/17:1H-x  [kernel.kallsyms]  [k] slab_free_freelist_hook

  - display used/hit build ids:

    # perf buildid-list | head -5
    5dcec522abf136fcfd3128f47e131f2365834dd7 /proc/kcore
    589e403a34f55486bcac848a45e00bcdeedd1ca8 /usr/lib64/libcrypto.so.1.1.1g
    94569566d4eac7e9c87ba029d43d4e2158f9527e /usr/lib64/libpthread-2.30.so
    559b9702bebe31c6d132c8dc5cc887673d65d5b5 /usr/lib64/libc-2.30.so
    40da7abe89f631f60538a17686a7d65c6a02ed31 /usr/lib64/ld-2.30.so

  - store build id binaries into build id cache:

    # perf buildid-cache -a perf.data
    OK   5dcec522abf136fcfd3128f47e131f2365834dd7 /proc/kcore
    OK   589e403a34f55486bcac848a45e00bcdeedd1ca8 /usr/lib64/libcrypto.so.1.1.1g
    OK   94569566d4eac7e9c87ba029d43d4e2158f9527e /usr/lib64/libpthread-2.30.so
    OK   559b9702bebe31c6d132c8dc5cc887673d65d5b5 /usr/lib64/libc-2.30.so
    OK   40da7abe89f631f60538a17686a7d65c6a02ed31 /usr/lib64/ld-2.30.so
    OK   a674f7a47c78e35a088104647b9640710277b489 /usr/sbin/sshd
    OK   e5cb4ca25f46485bdbc691c3a92e7e111dac3ef2 /usr/bin/bash
    OK   9bc8589108223c944b452f0819298a0c3cba6215 /usr/bin/find

    # find ~/.debug | head -5
    /root/.debug
    /root/.debug/proc
    /root/.debug/proc/kcore
    /root/.debug/proc/kcore/5dcec522abf136fcfd3128f47e131f2365834dd7
    /root/.debug/proc/kcore/5dcec522abf136fcfd3128f47e131f2365834dd7/kallsyms

  - run debuginfod daemon to provide binaries to another server (below)
    (the initialization could take some time)

    # debuginfod -F /

On another server:

  - copy perf.data from 'record' server and run:

    $ find ~/.debug/
    find: ‘/home/jolsa/.debug/’: No such file or directory

    $ perf buildid-list | head -5
    No kallsyms or vmlinux with build-id 5dcec522abf136fcfd3128f47e131f2365834dd7 was found
    5dcec522abf136fcfd3128f47e131f2365834dd7 [kernel.kallsyms]
    5784f813b727a50cfd3363234aef9fcbab685cc4 /lib/modules/5.10.0-rc2speed+/kernel/fs/xfs/xfs.ko
    589e403a34f55486bcac848a45e00bcdeedd1ca8 /usr/lib64/libcrypto.so.1.1.1g
    94569566d4eac7e9c87ba029d43d4e2158f9527e /usr/lib64/libpthread-2.30.so
    559b9702bebe31c6d132c8dc5cc887673d65d5b5 /usr/lib64/libc-2.30.so

  - report does not show anything (kernel build id does not match):

   $ perf report --stdio
   ...
    76.73%  swapper          [kernel.kallsyms]    [k] 0xffffffff81aa8ebe
     1.89%  find             [kernel.kallsyms]    [k] 0xffffffff810f2167
     0.93%  sshd             [kernel.kallsyms]    [k] 0xffffffff8153380c
     0.83%  swapper          [kernel.kallsyms]    [k] 0xffffffff81104b0b
     0.71%  kworker/u40:2-e  [kernel.kallsyms]    [k] 0xffffffff810f3850
     0.70%  kworker/u40:0-e  [kernel.kallsyms]    [k] 0xffffffff810f3850
     0.64%  find             [kernel.kallsyms]    [k] 0xffffffff81a9ba0a
     0.63%  find             [kernel.kallsyms]    [k] 0xffffffff81aa93b0

  - add build ids does not work, because existing binaries (on another server)
    have different build ids:

    $ perf buildid-cache -a perf.data
    No kallsyms or vmlinux with build-id 5dcec522abf136fcfd3128f47e131f2365834dd7 was found
    FAIL 5dcec522abf136fcfd3128f47e131f2365834dd7 [kernel.kallsyms]
    FAIL 5784f813b727a50cfd3363234aef9fcbab685cc4 /lib/modules/5.10.0-rc2speed+/kernel/fs/xfs/xfs.ko
    FAIL 589e403a34f55486bcac848a45e00bcdeedd1ca8 /usr/lib64/libcrypto.so.1.1.1g
    FAIL 94569566d4eac7e9c87ba029d43d4e2158f9527e /usr/lib64/libpthread-2.30.so
    FAIL 559b9702bebe31c6d132c8dc5cc887673d65d5b5 /usr/lib64/libc-2.30.so
    FAIL 40da7abe89f631f60538a17686a7d65c6a02ed31 /usr/lib64/ld-2.30.so
    FAIL a674f7a47c78e35a088104647b9640710277b489 /usr/sbin/sshd
    FAIL e5cb4ca25f46485bdbc691c3a92e7e111dac3ef2 /usr/bin/bash
    FAIL 9bc8589108223c944b452f0819298a0c3cba6215 /usr/bin/find

  - add build ids with debuginfod setup pointing to record server:

    $ perf buildid-cache -a perf.data --debuginfod http://192.168.122.174:8002
    No kallsyms or vmlinux with build-id 5dcec522abf136fcfd3128f47e131f2365834dd7 was found
    OK   5dcec522abf136fcfd3128f47e131f2365834dd7 [kernel.kallsyms]
    OK   5784f813b727a50cfd3363234aef9fcbab685cc4 /lib/modules/5.10.0-rc2speed+/kernel/fs/xfs/xfs.ko
    OK   589e403a34f55486bcac848a45e00bcdeedd1ca8 /usr/lib64/libcrypto.so.1.1.1g
    OK   94569566d4eac7e9c87ba029d43d4e2158f9527e /usr/lib64/libpthread-2.30.so
    OK   559b9702bebe31c6d132c8dc5cc887673d65d5b5 /usr/lib64/libc-2.30.so
    OK   40da7abe89f631f60538a17686a7d65c6a02ed31 /usr/lib64/ld-2.30.so
    OK   a674f7a47c78e35a088104647b9640710277b489 /usr/sbin/sshd
    OK   e5cb4ca25f46485bdbc691c3a92e7e111dac3ef2 /usr/bin/bash
    OK   9bc8589108223c944b452f0819298a0c3cba6215 /usr/bin/find

  - and report works:

    $ perf report --stdio
    ...
    76.73%  swapper          [kernel.kallsyms]    [k] native_safe_halt
     1.91%  find             [kernel.kallsyms]    [k] queue_work_on
     0.93%  sshd             [kernel.kallsyms]    [k] iowrite16
     0.83%  swapper          [kernel.kallsyms]    [k] finish_task_switch
     0.72%  kworker/u40:2-e  [kernel.kallsyms]    [k] process_one_work
     0.70%  kworker/u40:0-e  [kernel.kallsyms]    [k] process_one_work
     0.64%  find             [kernel.kallsyms]    [k] syscall_enter_from_user_mode
     0.63%  find             [kernel.kallsyms]    [k] _raw_spin_unlock_irqrestore

  - because we have the data in build id cache:

    $ find ~/.debug | head -10
    .../.debug
    .../.debug/home
    .../.debug/home/jolsa
    .../.debug/home/jolsa/.cache
    .../.debug/home/jolsa/.cache/debuginfod_client
    .../.debug/home/jolsa/.cache/debuginfod_client/5dcec522abf136fcfd3128f47e131f2365834dd7
    .../.debug/home/jolsa/.cache/debuginfod_client/5dcec522abf136fcfd3128f47e131f2365834dd7/executable
    .../.debug/home/jolsa/.cache/debuginfod_client/5dcec522abf136fcfd3128f47e131f2365834dd7/executable/5dcec522abf136fcfd3128f47e131f2365834dd7
    .../.debug/home/jolsa/.cache/debuginfod_client/5dcec522abf136fcfd3128f47e131f2365834dd7/executable/5dcec522abf136fcfd3128f47e131f2365834dd7/elf
    .../.debug/home/jolsa/.cache/debuginfod_client/5dcec522abf136fcfd3128f47e131f2365834dd7/executable/5dcec522abf136fcfd3128f47e131f2365834dd7/debug

Available also in:
  git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
  perf/build_id

thanks,
jirka
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

perf: Add build id data in mmap2 event

Adding support to carry build id data in mmap2 event.

The build id data replaces maj/min/ino/ino_generation
fields, which are also used to identify map's binary,
so it's ok to replace them with build id data:

  union {
          struct {
                  u32       maj;
                  u32       min;
                  u64       ino;
                  u64       ino_generation;
          };
          struct {
                  u8        build_id_size;
                  u8        __reserved_1;
                  u16       __reserved_2;
                  u8        build_id[20];
          };
  };

Replaced maj/min/ino/ino_generation fields give us size
of 24 bytes. We use 20 bytes for build id data, 1 byte
for size and rest is unused.

There's new misc bit for mmap2 to signal there's build
id data in it:

  #define PERF_RECORD_MISC_MMAP_BUILD_ID   (1 << 14)

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-4-jolsa@kernel.org

bpf: Add size arg to build_id_parse function

It's possible to have other build id types (other than default SHA1).
Currently there's also ld support for MD5 build id.

Adding size argument to build_id_parse function, that returns (if defined)
size of the parsed build id, so we can recognize the build id type.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-3-jolsa@kernel.org

bpf: Move stack_map_get_build_id into lib

Moving stack_map_get_build_id into lib with
declaration in linux/buildid.h header:

int build_id_parse(struct vm_area_struct *vma, unsigned char *build_id);

This function returns build id for given struct vm_area_struct.
There is no functional change to stack_map_get_build_id function.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-2-jolsa@kernel.org

Merge git://git./linux/kernel/git/netdev/net

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'Atomics for eBPF'

Brendan Jackman says:

====================

There's still one unresolved review comment from John[3] which I
will resolve with a followup patch.

Differences from v6->v7 [1]:

* Fixed riscv build error detected by 0-day robot.

Differences from v5->v6 [1]:

* Carried Björn Töpel's ack for RISC-V code, plus a couple more acks from
  Yonhgong.

* Doc fixups.

* Trivial cleanups.

Differences from v4->v5 [1]:

* Fixed bogus type casts in interpreter that led to warnings from
  the 0day robot.

* Dropped feature-detection for Clang per Andrii's suggestion in [4].
  The selftests will now fail to build unless you have llvm-project
  commit 286daafd6512. The ENABLE_ATOMICS_TEST macro is still needed
  to support the no_alu32 tests.

* Carried some Acks from John and Yonghong.

* Dropped confusing usage of __atomic_exchange from prog_test in
  favour of __sync_lock_test_and_set.

* [Really] got rid of all the forest of instruction macros
  (BPF_ATOMIC_FETCH_ADD and friends); now there's just BPF_ATOMIC_OP
  to define all the instructions as we use them in the verifier
  tests. This makes the atomic ops less special in that API, and I
  don't think the resulting usage is actually any harder to read.

Differences from v3->v4 [1]:

* Added one Ack from Yonghong. He acked some other patches but those
  have now changed non-trivally so I didn't add those acks.

* Fixups to commit messages.

* Fixed disassembly and comments: first arg to atomic_fetch_* is a
  pointer.

* Improved prog_test efficiency. BPF progs are now all loaded in a
  single call, then the skeleton is re-used for each subtest.

* Dropped use of tools/build/feature in favour of a one-liner in the
  Makefile.

* Dropped the commit that created an emit_neg helper in the x86
  JIT. It's not used any more (it wasn't used in v3 either).

* Combined all the different filter.h macros (used to be
  BPF_ATOMIC_ADD, BPF_ATOMIC_FETCH_ADD, BPF_ATOMIC_AND, etc) into
  just BPF_ATOMIC32 and BPF_ATOMIC64.

* Removed some references to BPF_STX_XADD from tools/, samples/ and
  lib/ that I missed before.

Differences from v2->v3 [1]:

* More minor fixes and naming/comment changes

* Dropped atomic subtract: compilers can implement this by preceding
  an atomic add with a NEG instruction (which is what the x86 JIT did
  under the hood anyway).

* Dropped the use of -mcpu=v4 in the Clang BPF command-line; there is
  no longer an architecture version bump. Instead a feature test is
  added to Kbuild - it builds a source file to check if Clang
  supports BPF atomics.

* Fixed the prog_test so it no longer breaks
  test_progs-no_alu32. This requires some ifdef acrobatics to avoid
  complicating the prog_tests model where the same userspace code
  exercises both the normal and no_alu32 BPF test objects, using the
  same skeleton header.

Differences from v1->v2 [1]:

* Fixed mistakes in the netronome driver

* Addd sub, add, or, xor operations

* The above led to some refactors to keep things readable. (Maybe I
  should have just waited until I'd implemented these before starting
  the review...)

* Replaced BPF_[CMP]SET | BPF_FETCH with just BPF_[CMP]XCHG, which
  include the BPF_FETCH flag

* Added a bit of documentation. Suggestions welcome for more places
  to dump this info...

The prog_test that's added depends on Clang/LLVM features added by
Yonghong in commit 286daafd6512 (was
https://reviews.llvm.org/D72184).

This only includes a JIT implementation for x86_64 - I don't plan to
implement JIT support myself for other architectures.

Operations
==========

This patchset adds atomic operations to the eBPF instruction set. The
use-case that motivated this work was a trivial and efficient way to
generate globally-unique cookies in BPF progs, but I think it's
obvious that these features are pretty widely applicable.  The
instructions that are added here can be summarised with this list of
kernel operations:

* atomic[64]_[fetch_]add
* atomic[64]_[fetch_]and
* atomic[64]_[fetch_]or
* atomic[64]_xchg
* atomic[64]_cmpxchg

The following are left out of scope for this effort:

* 16 and 8 bit operations
* Explicit memory barriers

Encoding
========

I originally planned to add new values for bpf_insn.opcode. This was
rather unpleasant: the opcode space has holes in it but no entire
instruction classes[2]. Yonghong Song had a better idea: use the
immediate field of the existing STX XADD instruction to encode the
operation. This works nicely, without breaking existing programs,
because the immediate field is currently reserved-must-be-zero, and
extra-nicely because BPF_ADD happens to be zero.

Note that this of course makes immediate-source atomic operations
impossible. It's hard to imagine a measurable speedup from such
instructions, and if it existed it would certainly not benefit x86,
which has no support for them.

The BPF_OP opcode fields are re-used in the immediate, and an
additional flag BPF_FETCH is used to mark instructions that should
fetch a pre-modification value from memory.

So, BPF_XADD is now called BPF_ATOMIC (the old name is kept to avoid
breaking userspace builds), and where we previously had .imm = 0, we
now have .imm = BPF_ADD (which is 0).

Operands
========

Reg-source eBPF instructions only have two operands, while these
atomic operations have up to four. To avoid needing to encode
additional operands, then:

- One of the input registers is re-used as an output register
  (e.g. atomic_fetch_add both reads from and writes to the source
  register).

- Where necessary (i.e. for cmpxchg) , R0 is "hard-coded" as one of
  the operands.

This approach also allows the new eBPF instructions to map directly
to single x86 instructions.

[1] Previous iterations:
    v1: https://lore.kernel.org/bpf/20201123173202.1335708-1-jackmanb@google.com/
    v2: https://lore.kernel.org/bpf/20201127175738.1085417-1-jackmanb@google.com/
    v3: https://lore.kernel.org/bpf/X8kN7NA7bJC7aLQI@google.com/
    v4: https://lore.kernel.org/bpf/20201207160734.2345502-1-jackmanb@google.com/
    v5: https://lore.kernel.org/bpf/20201215121816.1048557-1-jackmanb@google.com/
    v6: https://lore.kernel.org/bpf/20210112154235.2192781-1-jackmanb@google.com/

[2] Visualisation of eBPF opcode space:
    https://gist.github.com/bjackman/00fdad2d5dfff601c1918bc29b16e778

[3] Comment from John about propagating bounds in verifier:
    https://lore.kernel.org/bpf/5fcf0fbcc8aa8_9ab320853@john-XPS-13-9370.notmuch/

[4] Mail from Andrii about not supporting old Clang in selftests:
    https://lore.kernel.org/bpf/CAEf4BzYBddPaEzRUs=jaWSo5kbf=LZdb7geAUVj85GxLQztuAQ@mail.gmail.com/
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Document new atomic instructions

Document new atomic instructions.

Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-12-jackmanb@google.com

bpf: Add tests for new BPF atomic operations

The prog_test that's added depends on Clang/LLVM features added by
Yonghong in commit 286daafd6512 (was https://reviews.llvm.org/D72184).

Note the use of a define called ENABLE_ATOMICS_TESTS: this is used
to:

- Avoid breaking the build for people on old versions of Clang
- Avoid needing separate lists of test objects for no_alu32, where
atomics are not supported even if Clang has the feature.

The atomics_test.o BPF object is built unconditionally both for
test_progs and test_progs-no_alu32. For test_progs, if Clang supports
atomics, ENABLE_ATOMICS_TESTS is defined, so it includes the proper
test code. Otherwise, progs and global vars are defined anyway, as
stubs; this means that the skeleton user code still builds.

The atomics_test.o userspace object is built once and used for both
test_progs and test_progs-no_alu32. A variable called skip_tests is
defined in the BPF object's data section, which tells the userspace
object whether to skip the atomics test.

Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-11-jackmanb@google.com

bpf: Add bitwise atomic instructions

This adds instructions for

atomic[64]_[fetch_]and
atomic[64]_[fetch_]or
atomic[64]_[fetch_]xor

All these operations are isomorphic enough to implement with the same
verifier, interpreter, and x86 JIT code, hence being a single commit.

The main interesting thing here is that x86 doesn't directly support
the fetch_ version these operations, so we need to generate a CMPXCHG
loop in the JIT. This requires the use of two temporary registers,
IIUC it's safe to use BPF_REG_AX and x86's AUX_REG for this purpose.

Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-10-jackmanb@google.com

bpf: Pull out a macro for interpreting atomic ALU operations

Since the atomic operations that are added in subsequent commits are
all isomorphic with BPF_ADD, pull out a macro to avoid the
interpreter becoming dominated by lines of atomic-related code.

Note that this sacrificies interpreter performance (combining
STX_ATOMIC_W and STX_ATOMIC_DW into single switch case means that we
need an extra conditional branch to differentiate them) in favour of
compact and (relatively!) simple C code.

Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-9-jackmanb@google.com

bpf: Add instructions for atomic_[cmp]xchg

This adds two atomic opcodes, both of which include the BPF_FETCH
flag. XCHG without the BPF_FETCH flag would naturally encode
atomic_set. This is not supported because it would be of limited
value to userspace (it doesn't imply any barriers). CMPXCHG without
BPF_FETCH woulud be an atomic compare-and-write. We don't have such
an operation in the kernel so it isn't provided to BPF either.

There are two significant design decisions made for the CMPXCHG
instruction:

- To solve the issue that this operation fundamentally has 3
   operands, but we only have two register fields. Therefore the
   operand we compare against (the kernel's API calls it 'old') is
   hard-coded to be R0. x86 has similar design (and A64 doesn't
   have this problem).

   A potential alternative might be to encode the other operand's
   register number in the immediate field.

- The kernel's atomic_cmpxchg returns the old value, while the C11
   userspace APIs return a boolean indicating the comparison
   result. Which should BPF do? A64 returns the old value. x86 returns
   the old value in the hard-coded register (and also sets a
   flag). That means return-old-value is easier to JIT, so that's
   what we use.

Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-8-jackmanb@google.com

bpf: Add BPF_FETCH field / create atomic_fetch_add instruction

The BPF_FETCH field can be set in bpf_insn.imm, for BPF_ATOMIC
instructions, in order to have the previous value of the
atomically-modified memory location loaded into the src register
after an atomic op is carried out.

Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-7-jackmanb@google.com

bpf: Move BPF_STX reserved field check into BPF_STX verifier code

I can't find a reason why this code is in resolve_pseudo_ldimm64;
since I'll be modifying it in a subsequent commit, tidy it up.

Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-6-jackmanb@google.com

bpf: Rename BPF_XADD and prepare to encode other atomics in .imm

A subsequent patch will add additional atomic operations. These new
operations will use the same opcode field as the existing XADD, with
the immediate discriminating different operations.

In preparation, rename the instruction mode BPF_ATOMIC and start
calling the zero immediate BPF_ADD.

This is possible (doesn't break existing valid BPF progs) because the
immediate field is currently reserved MBZ and BPF_ADD is zero.

All uses are removed from the tree but the BPF_XADD definition is
kept around to avoid breaking builds for people including kernel
headers.

Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com

bpf: x86: Factor out a lookup table for some ALU opcodes

A later commit will need to lookup a subset of these opcodes. To
avoid duplicating code, pull out a table.

The shift opcodes won't be needed by that later commit, but they're
already duplicated, so fold them into the table anyway.

Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-4-jackmanb@google.com

bpf: x86: Factor out emission of REX byte

The JIT case for encoding atomic ops is about to get more
complicated. In order to make the review & resulting code easier,
let's factor out some shared helpers.

Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-3-jackmanb@google.com

bpf: x86: Factor out emission of ModR/M for *(reg + off)

The case for JITing atomics is about to get more complicated. Let's
factor out some common code to make the review and result more
readable.

NB the atomics code doesn't yet use the new helper - a subsequent
patch will add its use as a side-effect of other changes.

Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-2-jackmanb@google.com

Merge branch 'dissect-ptp-l2-packet-header'

Eran Ben Elisha says:

====================
Dissect PTP L2 packet header

This series adds support for dissecting PTP L2 packet
header (EtherType 0x88F7).

For packet header dissecting, skb->protocol is needed. Add protocol
parsing operation to vlan ops, to guarantee skb->protocol is set,
as EtherType 0x88F7 occasionally follows a vlan header.
====================

Link: https://lore.kernel.org/r/1610478433-7606-1-git-send-email-eranbe@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: flow_dissector: Parse PTP L2 packet header

Add support for parsing PTP L2 packet header. Such packet consists
of an L2 header (with ethertype of ETH_P_1588), PTP header, body
and an optional suffix.

Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: vlan: Add parse protocol header ops

Add parse protocol header ops for vlan device. Before this patch, vlan
tagged packet transmitted by af_packet had skb->protocol unset. Some
kernel methods (like __skb_flow_dissect()) rely on this missing information
for its packet processing.

Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ch_ipsec: Remove initialization of rxq related data

Removing initialization of nrxq and rxq_size in uld_info. As
ipsec uses nic queues only, there is no need to create uld
rx queues for ipsec.

Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Link: https://lore.kernel.org/r/20210113044302.25522-1-ayush.sawal@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-ipa-gsi-interrupt-updates'

Alex Elder says:

====================
net: ipa: GSI interrupt updates

This series implements some updates for the GSI interrupt code,
buliding on some bug fixes implemented last month.

The first two are simple changes made to improve readability and
consistency.  The third replaces all msleep() calls with comparable
usleep_range() calls.

The remainder make some more substantive changes to make the code
align with recommendations from Qualcomm.  The fourth implements a
much shorter timeout for completion GSI commands, and the fifth
implements a longer delay between retries of the STOP channel
command.  Finally, the last implements retries for stopping TX
channels (in addition to RX channels).
====================

Link: https://lore.kernel.org/r/20210113171532.19248-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: retry TX channel stop commands

For RX channels we issue a stop command more than once if necessary
to allow it to stop. It turns out that TX channels could also
require retries.

Retry channel stop commands if necessary regardless of the channel
direction. Rename the symbol defining the retry count so it's not
RX-specific.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: change stop channel retry delay

If a GSI stop channel command leaves the channel in STOP_IN_PROC
state, we retry the stop command after a 1-2 millisecond delay.

I have been told that a 3-5 millisecond delay is a better choice.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: change GSI command timeout

The GSI command timeout is currently 5 seconds, which is much higher
than it should be.

Express the timeout in milliseconds rather than seconds, and reduce
it to 50 milliseconds.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: use usleep_range()
65;6003;1c
The use of msleep() for small periods (less than 20 milliseconds) is
not recommended because the actual delay can be much different than
expected.

We use msleep(1) in several places in the IPA driver to insert short
delays. Replace them with usleep_range calls, which should reliably
delay a period in the range requested.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: introduce some interrupt helpers

Create a new function gsi_irq_ev_ctrl_enable() that encapsulates
enabling the event ring control GSI interrupt type, and enables a
single event ring to signal that interrupt. When an event ring
changes state as a result of an event ring command, it triggers this
interrupt.

Create an inverse function gsi_irq_ev_ctrl_disable() as well.
Because only one event ring at a time is enabled for this interrupt,
we can simply disable the interrupt for *all* channels.

Create a pair of helpers that serve the same purpose for channel
commands.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: a few simple renames

The return value of gsi_command() is true if successful or false if
we time out waiting for a completion interrupt.

Rename the variables in the three callers of gsi_command() to be
"timeout", to make it more obvious that's the only reason for
failure.

In addition, add a "gsi_" prefix to evt_ring_command() so its name
is consistent with the convention used for GSI channel and generic
commands.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-next-for-5.12-20210114' of git://git./linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2021-01-14

The first two patches update the MAINTAINERS file, Lukas Bulwahn's patch fixes
the files entry for the tcan4x5x driver, which was broken by me in net-next.
A patch by me adds the a missing header file to the CAN Networking Layer.

The next 5 patches are by me and split the the CAN driver related
infrastructure code into more files in a separate subdir. The next two patches
by me clean up the CAN length related code. This is followed by 6 patches by
Vincent Mailhol and me, they add helper code for for CAN frame length
calculation neede for BQL support.

A patch by Vincent Mailhol adds software TX timestamp support.

The last patch is by me, targets the tcan4x5x driver, and removes the unneeded
__packed attribute from the struct tcan4x5x_map_buf.

* tag 'linux-can-next-for-5.12-20210114' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
  can: tcan4x5x: remove __packed attribute from struct tcan4x5x_map_buf
  can: dev: can_put_echo_skb(): add software tx timestamps
  can: dev: can_rx_offload_get_echo_skb(): extend to return can frame length
  can: dev: can_get_echo_skb(): extend to return can frame length
  can: dev: can_put_echo_skb(): extend to handle frame_len
  can: dev: extend struct can_skb_priv to hold CAN frame length
  can: length: can_skb_get_frame_len(): introduce function to get data length of frame in data link layer
  can: length: canfd_sanitize_len(): add function to sanitize CAN-FD data length
  can: length: can_fd_len2dlc(): simplify length calculcation
  can: length: convert to kernel coding style
  can: dev: move netlink related code into seperate file
  can: dev: move skb related into seperate file
  can: dev: move length related code into seperate file
  can: dev: move bittiming related code into seperate file
  can: dev: move driver related infrastructure into separate subdir
  MAINTAINERS: CAN network layer: add missing header file can-ml.h
  MAINTAINERS: adjust entry to tcan4x5x file split
====================

Link: https://lore.kernel.org/r/20210114075617.1402597-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-dsa-link-aggregation-support'

Tobias Waldekranz says:

====================
net: dsa: Link aggregation support

Start of by adding an extra notification when adding a port to a bond,
this allows static LAGs to be offloaded using the bonding driver.

Then add the generic support required to offload link aggregates to
drivers built on top of the DSA subsystem.

Finally, implement offloading for the mv88e6xxx driver, i.e. Marvell's
LinkStreet family.

Supported LAG implementations:
- Bonding
- Team

Supported modes:
- Isolated. The LAG may be used as a regular interface outside of any
  bridge.
- Bridged. The LAG may be added to a bridge, in which case switching
  is offloaded between the LAG and any other switch ports. I.e. the
  LAG behaves just like a port from this perspective.

In bridged mode, the following is supported:
- STP filtering.
- VLAN filtering.
- Multicast filtering. The bridge correctly snoops IGMP and configures
  the proper groups if snooping is enabled. Static groups can also be
  configured. MLD seems to work, but has not been extensively tested.
- Unicast filtering. Automatic learning works. Static entries are
  _not_ supported. This will be added in a later series as it requires
  some more general refactoring in mv88e6xxx before I can test it.

v4 -> v5:
- Cleanup PVT configuration for LAGed ports in mv88e6xxx (Vladimir)
- Document dsa_lag_{map,unmap} (Vladimir)
====================

Link: https://lore.kernel.org/r/20210113084255.22675-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: tag_dsa: Support reception of packets from LAG devices

Packets ingressing on a LAG that egress on the CPU port, which are not
classified as management, will have a FORWARD tag that does not
contain the normal source device/port tuple. Instead the trunk bit
will be set, and the port field holds the LAG id.

Since the exact source port information is not available in the tag,
frames are injected directly on the LAG interface and thus do never
pass through any DSA port interface on ingress.

Management frames (TO_CPU) are not affected and will pass through the
DSA port interface as usual.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mv88e6xxx: Link aggregation support

Support offloading of LAGs to hardware. LAGs may be attached to a
bridge in which case VLANs, multicast groups, etc. are also offloaded
as usual.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: Link aggregation support

Monitor the following events and notify the driver when:

- A DSA port joins/leaves a LAG.
- A LAG, made up of DSA ports, joins/leaves a bridge.
- A DSA port in a LAG is enabled/disabled (enabled meaning
"distributing" in 802.3ad LACP terms).

When a LAG joins a bridge, the DSA subsystem will treat that as each
individual port joining the bridge. The driver may look at the port's
LAG device pointer to see if it is associated with any LAG, if that is
required. This is analogue to how switchdev events are replicated out
to all lower devices when reaching e.g. a LAG.

Drivers can optionally request that DSA maintain a linear mapping from
a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the
desired size.

In the event that the hardware is not capable of offloading a
particular LAG for any reason (the typical case being use of exotic
modes like broadcast), DSA will take a hands-off approach, allowing
the LAG to be formed as a pure software construct. This is reported
back through the extended ACK, but is otherwise transparent to the
user.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: Don't offload port attributes on standalone ports

In a situation where a standalone port is indirectly attached to a
bridge (e.g. via a LAG) which is not offloaded, do not offload any
port attributes either. The port should behave as a standard NIC.

Previously, on mv88e6xxx, this meant that in the following setup:

     br0
     /
  team0
   / \
swp0 swp1

If vlan filtering was enabled on br0, swp0's and swp1's QMode was set
to "secure". This caused all untagged packets to be dropped, as their
default VID (0) was not loaded into the VTU.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: bonding: Notify ports about their initial state

When creating a static bond (e.g. balance-xor), all ports will always
be enabled. This is set, and the corresponding notification is sent
out, before the port is linked to the bond upper.

In the offloaded case, this ordering is hard to deal with.

The lower will first see a notification that it can not associate with
any bond. Then the bond is joined. After that point no more
notifications are sent, so all ports remain disabled.

This change simply sends an extra notification once the port has been
linked to the upper to synchronize the initial state.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: pci: switch from 'pci_' to 'dma_' API

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'mlxsw_pci_queue_init()' and
'mlxsw_pci_fw_area_init()' GFP_KERNEL can be used because both functions
are already using this flag and no lock is acquired.

When memory is allocated in 'mlxsw_pci_mbox_alloc()' GFP_KERNEL can be used
because it is only called from the probe function and no lock is acquired
in the between.
The call chain is:
  --> mlxsw_pci_probe()
    --> mlxsw_pci_cmd_init()
      --> mlxsw_pci_mbox_alloc()

While at it, also replace the 'dma_set_mask/dma_set_coherent_mask' sequence
by a less verbose 'dma_set_mask_and_coherent() call.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20210114084757.490540-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: marvell: prestera: fix uninitialized vid in prestera_port_vlans_add

prestera_bridge_port_vlan_add should have been called with vlan->vid,
however this was masked by the presence of the local vid variable and I
did not notice the build warning.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: b7a9e0da2d1c ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Taras Chornyi <tchornyi@marvell.com>
Link: https://lore.kernel.org/r/20210114083556.2274440-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: openvswitch: add log message for error case

As requested by upstream OVS, added some error messages in the
validate_and_copy_dec_ttl function.

Includes a small cleanup, which removes an unnecessary parameter
from the dec_ttl_exception_handler() function.

Reported-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Link: https://lore.kernel.org/r/161054576573.26637.18396634650212670580.stgit@ebuild
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'selftests-updates-to-allow-single-instance-of-nettest-for-client-and-server'

David Ahern says:

====================
selftests: Updates to allow single instance of nettest for client and server

Update nettest to handle namespace change internally to allow a
single instance to run both client and server modes. Device validation
needs to be moved after the namespace change and a few run time
options need to be split to allow values for client and server.

v4
- really fix the memory leak with stdout/stderr buffers

v3
- send proper status in do_server for UDP sockets
- fix memory leak with stdout/stderr buffers
- new patch with separate option for address binding
- new patch to remove unnecessary newline

v2
- fix checkpath warnings
====================

Link: https://lore.kernel.org/r/20210114030949.54425-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Add separate option to nettest for address binding

Add separate option to nettest to specify local address
binding in client mode.

Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Remove exraneous newline in nettest

Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Add separate options for server device bindings

Add new options to nettest to specify device binding and expected
device binding for server mode, and update fcnal-test script. This
is needed to allow a single instance of nettest running both server
and client modes to use different device bindings.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Add new option for client-side passwords

Add new option to nettest to specify MD5 password to use for client
side. Update fcnal-test script. This is needed for a single instance
running both server and client modes to test password mismatches.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Consistently specify address for MD5 protection

nettest started with -r as the remote address for MD5 passwords.
The -m argument was added to use prefixes with a length when that
feature was added to the kernel. Since -r is used to specify
remote address for client mode, change nettest to only use -m
for MD5 passwords and update fcnal-test script.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Make address validation apply only to client mode

When a single instance of nettest is used for client and server
make sure address validation is only done for client mode.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Add missing newline in nettest error messages

A few logging lines are missing the newline, or need it moved up for
cleaner logging.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Use separate stdout and stderr buffers in nettest

When a single instance of nettest is doing both client and
server modes, stdout and stderr messages can get interlaced
and become unreadable. Allocate a new set of buffers for the
child process handling server mode.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Add support to nettest to run both client and server

Add option to nettest to run both client and server within a
single instance. Client forks a child process to run the server
code. A pipe is used for the server to tell the client it has
initialized and is ready or had an error. This avoid unnecessary
sleeps to handle such race when the commands are separately launched.

Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Add options to set network namespace to nettest

Add options to specify server and client network namespace to
use before running respective functions.

Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Move address validation in nettest

IPv6 addresses can have a device name to declare a scope (e.g.,
fe80::5054:ff:fe12:3456%eth0). The next patch adds support to
switch network namespace before running client or server code
(or both), so move the address validation to the server and
client functions.

IPv4 multicast groups do not have the device scope in the address
specification, so they can be validated inline with option parsing.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Move convert_addr up in nettest

convert_addr needs to be invoked in a different location. Move
the code up to avoid a forward declaration.

Code move only.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: Move device validation in nettest

Later patch adds support for switching network namespaces before
running client, server or both. Device validations need to be
done after the network namespace switch, so add a helper to do it
and invoke in server and client code versus inline with argument
parsing. Move related argument checks as well.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'add-100-base-x-mode'

Bjarni Jonasson says:

====================
Add 100 base-x mode

Adding support for 100 base-x in phylink.
The Sparx5 switch supports 100 base-x pcs (IEEE 802.3 Clause 24) 4b5b encoded.
These patches adds phylink support for that mode.

Tested in Sparx5, using sfp modules:
Axcen 100fx AXFE-1314-0521 (base-fx)
Axcen 100lx AXFE-1314-0551 (base-lx)
HP SFP 100FX J9054C (bx-10)
Excom SFP-SX-M1002 (base-lx)

v1 -> v2:
  Added description to Documentation/networking/phy.rst
  Moved PHY_INTERFACE_MODE_100BASEX to above 1000BASEX
  Patching against net-next
====================

Link: https://lore.kernel.org/r/20210113115626.17381-1-bjarni.jonasson@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sfp: add support for 100 base-x SFPs

Add support for 100Base-FX, 100Base-LX, 100Base-PX and 100Base-BX10 modules
This is needed for Sparx-5 switch.

Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: Add 100 base-x mode

Sparx-5 supports this mode and it is missing in the PHY core.

Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: ar803x: disable extended next page bit

This bit is enabled by default and advertises support for extended
next page support. XNP is only needed for 10GBase-T and MultiGig
support which is not supported. Additionally, Cisco MultiGig switches
will read this bit and attempt 10Gb negotiation even though Next Page
support is disabled. This will cause timeouts when the interface is
forced to 100Mbps and auto-negotiation will fail. The interfaces are
only 1000Base-T and supporting auto-negotiation for this only requires
the Next Page bit to be set.

Taken from:
https://github.com/SolidRun/linux-stable/commit/7406c5244b7ea6bc17a2afe8568277a8c4b126a9
and adapted to mainline kernels by rmk.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1kzSdb-000417-FJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-kselftest-fixes-5.11-rc4' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
"One single fix to skip BPF selftests by default.

  BPF selftests have a hard dependency on cutting edge versions of tools
  in the BPF ecosystem including LLVM.

  Skipping BPF allows by default will make it easier for users
  interested in running kselftest as a whole. Users can include BPF in
  Kselftest build by via SKIP_TARGETS variable"

* tag 'linux-kselftest-fixes-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: Skip BPF seftests by default

Merge tag 'net-5.11-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"We have a few fixes for long standing issues, in particular Eric's fix
  to not underestimate the skb sizes, and my fix for brokenness of
  register_netdevice() error path. They may uncover other bugs so we
  will keep an eye on them. Also included are Willem's fixes for
  kmap(_atomic).

  Looking at the "current release" fixes, it seems we are about one rc
  behind a normal cycle. We've previously seen an uptick of "people had
  run their test suites" / "humans actually tried to use new features"
  fixes between rc2 and rc3.

  Summary:

  Current release - regressions:

   - fix feature enforcement to allow NETIF_F_HW_TLS_TX if IP_CSUM &&
     IPV6_CSUM

   - dcb: accept RTM_GETDCB messages carrying set-like DCB commands if
     user is admin for backward-compatibility

   - selftests/tls: fix selftests build after adding ChaCha20-Poly1305

  Current release - always broken:

   - ppp: fix refcount underflow on channel unbridge

   - bnxt_en: clear DEFRAG flag in firmware message when retry flashing

   - smc: fix out of bound access in the new netlink interface

  Previous releases - regressions:

   - fix use-after-free with UDP GRO by frags

   - mptcp: better msk-level shutdown

   - rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM
     request

   - i40e: xsk: fix potential NULL pointer dereferencing

  Previous releases - always broken:

   - skb frag: kmap_atomic fixes

   - avoid 32 x truesize under-estimation for tiny skbs

   - fix issues around register_netdevice() failures

   - udp: prevent reuseport_select_sock from reading uninitialized socks

   - dsa: unbind all switches from tree when DSA master unbinds

   - dsa: clear devlink port type before unregistering slave netdevs

   - can: isotp: isotp_getname(): fix kernel information leak

   - mlxsw: core: Thermal control fixes

   - ipv6: validate GSO SKB against MTU before finish IPv6 processing

   - stmmac: use __napi_schedule() for PREEMPT_RT

   - net: mvpp2: remove Pause and Asym_Pause support

  Misc:

   - remove from MAINTAINERS folks who had been inactive for >5yrs"

* tag 'net-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
  mptcp: fix locking in mptcp_disconnect()
  net: Allow NETIF_F_HW_TLS_TX if IP_CSUM && IPV6_CSUM
  MAINTAINERS: dccp: move Gerrit Renker to CREDITS
  MAINTAINERS: ipvs: move Wensong Zhang to CREDITS
  MAINTAINERS: tls: move Aviad to CREDITS
  MAINTAINERS: ena: remove Zorik Machulsky from reviewers
  MAINTAINERS: vrf: move Shrijeet to CREDITS
  MAINTAINERS: net: move Alexey Kuznetsov to CREDITS
  MAINTAINERS: altx: move Jay Cliburn to CREDITS
  net: avoid 32 x truesize under-estimation for tiny skbs
  nt: usb: USB_RTL8153_ECM should not default to y
  net: stmmac: fix taprio configuration when base_time is in the past
  net: stmmac: fix taprio schedule configuration
  net: tip: fix a couple kernel-doc markups
  net: sit: unregister_netdevice on newlink's error path
  net: stmmac: Fixed mtu channged by cache aligned
  cxgb4/chtls: Fix tid stuck due to wrong update of qid
  i40e: fix potential NULL pointer dereferencing
  net: stmmac: use __napi_schedule() for PREEMPT_RT
  can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check
  ...

mptcp: fix locking in mptcp_disconnect()

tcp_disconnect() expects the caller acquires the sock lock,
but mptcp_disconnect() is not doing that. Add the missing
required lock.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 76e2a55d1625 ("mptcp: better msk-level shutdown.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/f818e82b58a556feeb71dcccc8bf1c87aafc6175.1610638176.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

- memory leak fix for Wacom driver (Ping Cheng)

- various trivial small fixes, cleanups and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-hidpp: Add product ID for MX Ergo in Bluetooth mode
  HID: Ignore battery for Elan touchscreen on ASUS UX550
  HID: logitech-dj: add the G602 receiver
  HID: wiimote: remove h from printk format specifier
  HID: uclogic: remove h from printk format specifier
  HID: sony: select CONFIG_CRC32
  HID: sfh: fix address space confusion
  HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device
  HID: wacom: Fix memory leakage caused by kfifo_alloc

net: Allow NETIF_F_HW_TLS_TX if IP_CSUM && IPV6_CSUM

Cited patch below blocked the TLS TX device offload unless HW_CSUM
is set. This broke devices that use IP_CSUM && IP6_CSUM.
Here we fix it.

Note that the single HW_TLS_TX feature flag indicates support for
both IPv4/6, hence it should still be disabled in case only one of
(IP_CSUM | IPV6_CSUM) is set.

Fixes: ae0b04b238e2 ("net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reported-by: Rohit Maheshwari <rohitm@chelsio.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Link: https://lore.kernel.org/r/20210114151215.7061-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'maintainers-remove-inactive-folks-from-networking'

To make maintainers' lives easier we're trying to nudge people
towards CCing all the relevant folks on patches, in an attempt
to improve review rate. We have a check in patchwork which validates
the CC list against get_maintainers.pl. It's a little awkward, however,
to force people to CC maintainers who we haven't seen on the mailing
list for years. This series removes from maintainers folks who didn't
provide any tag (incl. authoring a patch) in the last 5 years.
To ensure reasonable signal to noise ratio we only considered
MAINTAINERS entries which had more than 100 patches fall under
them in that time period.

All this is purely a process-greasing exercise, I hope nobody
sees this series as an affront. Most folks are moved to CREDITS,
a couple entries are simply removed.

The following inactive maintainers are kept, because they indicated
the intention to come back in the near future:

- Veaceslav Falico (bonding)
- Christian Benvenuti (Cisco drivers)
- Felix Fietkau (mtk-eth)
- Mirko Linder (skge/sky2)

Patches in this series contain report from a script which did
the analysis. Big thanks to Jonathan Corbet for help and writing
the script (although I feel like I used it differently than Jon
may have intended ;)). The output format is thus:

Subsystem $name
  Changes $reviewed / $total ($percent%)           // how many changes to the subsystem had at least one ack/review
  Last activity: $date_of_most_recent_patch
  $maintainer/reviewer1:
    Author $last_commit_authored_by_the_person $how_many_in_5yrs
    Committer $last_committed $how_many
    Tags $last_tag_like_review_signoff_etc $how_many
  $maintainer/reviewer2:
    Author $last_commit_authored_by_the_person $how_many_in_5yrs
    Committer $last_committed $how_many
    Tags $last_tag_like_review_signoff_etc $how_many
  Top reviewers: // Top 3 reviewers (who are not listed in MAINTAINERS)
    [$count_of_reviews_and_acks]: $email
  INACTIVE MAINTAINER $name   // maintainer / reviewer who has done nothing in last 5yrs

v2:
- keep Felix and Mirko

Link: https://lore.kernel.org/r/20210114014912.2519931-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: dccp: move Gerrit Renker to CREDITS

As far as I can tell we haven't heard from Gerrit for roughly
5 years now. DCCP patch would really benefit from some review.
Gerrit was the last maintainer so mark this entry as orphaned.

Subsystem DCCP PROTOCOL
  Changes 38 / 166 (22%)
  (No activity)
  Top reviewers:
    [6]: kstewart@linuxfoundation.org
    [6]: allison@lohutok.net
    [5]: edumazet@google.com
  INACTIVE MAINTAINER Gerrit Renker <gerrit@erg.abdn.ac.uk>

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: ipvs: move Wensong Zhang to CREDITS

Move Wensong Zhang to credits, we haven't heard from
him in years.

Subsystem IPVS
  Changes 83 / 226 (36%)
  Last activity: 2020-11-27
  Wensong Zhang <wensong@linux-vs.org>:
  Simon Horman <horms@verge.net.au>:
    Committer c24b75e0f923 2019-10-24 00:00:00 33
    Tags 7980d2eabde8 2020-10-12 00:00:00 76
  Julian Anastasov <ja@ssi.bg>:
    Author 7980d2eabde8 2020-10-12 00:00:00 26
    Tags 4bc3c8dc9f5f 2020-11-27 00:00:00 78
  Top reviewers:
    [6]: horms+renesas@verge.net.au
  INACTIVE MAINTAINER Wensong Zhang <wensong@linux-vs.org>

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: tls: move Aviad to CREDITS

Aviad wrote parts of the initial TLS implementation
but hasn't been contributing to TLS since.

Subsystem NETWORKING [TLS]
  Changes 123 / 308 (39%)
  Last activity: 2020-12-01
  Boris Pismenny <borisp@nvidia.com>:
    Tags 138559b9f99d 2020-11-17 00:00:00 1
  Aviad Yehezkel <aviadye@nvidia.com>:
  John Fastabend <john.fastabend@gmail.com>:
    Author e91de6afa81c 2020-06-01 00:00:00 22
    Tags e91de6afa81c 2020-06-01 00:00:00 29
  Daniel Borkmann <daniel@iogearbox.net>:
    Author c16ee04c9b30 2018-10-20 00:00:00 7
    Committer b8e202d1d1d0 2020-02-21 00:00:00 19
    Tags b8e202d1d1d0 2020-02-21 00:00:00 28
  Jakub Kicinski <kuba@kernel.org>:
    Author 5c39f26e67c9 2020-11-27 00:00:00 89
    Committer d31c08007523 2020-12-01 00:00:00 15
    Tags d31c08007523 2020-12-01 00:00:00 117
  Top reviewers:
    [50]: dirk.vandermerwe@netronome.com
    [26]: simon.horman@netronome.com
    [14]: john.hurley@netronome.com
  INACTIVE MAINTAINER Aviad Yehezkel <aviadye@nvidia.com>

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: ena: remove Zorik Machulsky from reviewers

While ENA has 3 reviewers and 2 maintainers, we mostly see review
tags and comments from the maintainers. While we very much appreciate
Zorik's invovment in the community let's trim the reviewer list
down to folks we've seen tags from.

Subsystem AMAZON ETHERNET DRIVERS
  Changes 13 / 269 (4%)
  Last activity: 2020-11-24
  Netanel Belgazal <netanel@amazon.com>:
    Author 24dee0c7478d 2019-12-10 00:00:00 43
    Tags 0e3a3f6dacf0 2020-07-21 00:00:00 47
  Arthur Kiyanovski <akiyano@amazon.com>:
    Author 0e3a3f6dacf0 2020-07-21 00:00:00 79
    Tags 09323b3bca95 2020-11-24 00:00:00 104
  Guy Tzalik <gtzalik@amazon.com>:
    Tags 713865da3c62 2020-09-10 00:00:00 3
  Saeed Bishara <saeedb@amazon.com>:
    Tags 470793a78ce3 2020-02-11 00:00:00 2
  Zorik Machulsky <zorik@amazon.com>:
  Top reviewers:
    [4]: sameehj@amazon.com
    [3]: snelson@pensando.io
    [3]: shayagr@amazon.com
  INACTIVE MAINTAINER Zorik Machulsky <zorik@amazon.com>

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: vrf: move Shrijeet to CREDITS

Shrijeet has moved on from VRF-related work.

Subsystem VRF
  Changes 30 / 120 (25%)
  Last activity: 2020-12-09
  David Ahern <dsahern@kernel.org>:
    Author 1b6687e31a2d 2020-07-23 00:00:00 1
    Tags 9125abe7b9cb 2020-12-09 00:00:00 4
  Shrijeet Mukherjee <shrijeet@gmail.com>:
  Top reviewers:
    [13]: dsahern@gmail.com
    [4]: dsa@cumulusnetworks.com
  INACTIVE MAINTAINER Shrijeet Mukherjee <shrijeet@gmail.com>

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: net: move Alexey Kuznetsov to CREDITS

Move Alexey to CREDITS.

I am probably not giving him enough justice with
the description line..

Subsystem NETWORKING [IPv4/IPv6]
  Changes 1535 / 5111 (30%)
  Last activity: 2020-12-10
  "David S. Miller" <davem@davemloft.net>:
    Author b7e4ba9a91df 2020-12-09 00:00:00 407
    Committer e0fecb289ad3 2020-12-10 00:00:00 3992
    Tags e0fecb289ad3 2020-12-10 00:00:00 3978
  Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>:
  Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>:
    Tags d5d8760b78d0 2016-06-16 00:00:00 8
  Top reviewers:
    [225]: edumazet@google.com
    [222]: dsahern@gmail.com
    [176]: ncardwell@google.com
  INACTIVE MAINTAINER Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: altx: move Jay Cliburn to CREDITS

Jay was not active in recent years and does not have plans
to return to work on ATLX drivers.

Subsystem ATLX ETHERNET DRIVERS
  Changes 20 / 116 (17%)
  Last activity: 2020-02-24
  Jay Cliburn <jcliburn@gmail.com>:
  Chris Snook <chris.snook@gmail.com>:
    Tags ea973742140b 2020-02-24 00:00:00 1
  Top reviewers:
    [4]: andrew@lunn.ch
    [2]: kuba@kernel.org
    [2]: o.rempel@pengutronix.de
  INACTIVE MAINTAINER Jay Cliburn <jcliburn@gmail.com>

Acked-by: Chris Snook <chris.snook@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>