OSDN Git Service
Arnd Bergmann [Mon, 27 Jul 2020 12:24:50 +0000 (14:24 +0200)]
Merge tag 'drivers_soc_for_5.9' of git://git./linux/kernel/git/ssantosh/linux-keystone into arm/drivers
SOC: TI Keystone driver update for v5.9
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
* tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify
soc: ti: k3: fix semicolon.cocci warnings
soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring'
dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair
soc: ti: k3-ringacc: separate soc specific initialization
soc: ti: k3-ringacc: add request pair of rings api.
soc: ti: k3-ringacc: add ring's flags to dump
soc: ti: k3-ringacc: Move state tracking variables under a struct
dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema
Link: https://lore.kernel.org/r/1595711814-7015-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Wei Yongjun [Fri, 24 Jul 2020 21:47:10 +0000 (14:47 -0700)]
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
The sparse tool complains as follows:
drivers/soc/ti/knav_qmss_acc.c:453:23: warning:
symbol 'knav_acc_range_ops' was not declared. Should it be static?
'knav_acc_range_ops' is not used outside of knav_qmss_acc.c,
so marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Alexander A. Klimov [Fri, 24 Jul 2020 21:43:48 +0000 (14:43 -0700)]
firmware: ti_sci: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Randy Dunlap [Fri, 24 Jul 2020 21:42:03 +0000 (14:42 -0700)]
soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify
Drop the repeated word "an" in a comment.
Insert "and" between "source" and "destination" as is done a few
lines earlier.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
kernel test robot [Fri, 24 Jul 2020 21:39:47 +0000 (14:39 -0700)]
soc: ti: k3: fix semicolon.cocci warnings
drivers/soc/ti/k3-ringacc.c:616:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes:
3277e8aa2504 ("soc: ti: k3: add navss ringacc driver")
CC: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Grygorii Strashko [Fri, 24 Jul 2020 21:39:40 +0000 (14:39 -0700)]
soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring'
Fix build warning in k3_ringacc_ring_cfg():
smatch warnings:
drivers/soc/ti/k3-ringacc.c:562 k3_ringacc_ring_cfg() warn: variable dereferenced before check 'ring' (see line 559)
557 int k3_ringacc_ring_cfg(struct k3_ring *ring, struct k3_ring_cfg *cfg)
558 {
@559 struct k3_ringacc *ringacc = ring->parent;
^^^^^^^^^^^^
Dereference.
560 int ret = 0;
561
@562 if (!ring || !cfg)
^^^^
Check too late. Delete it?
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Peter Ujfalusi [Fri, 24 Jul 2020 21:20:24 +0000 (14:20 -0700)]
dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair
We only request ring pairs via K3 DMA driver, switch to use the new
k3_ringacc_request_rings_pair() to simplify the code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Grygorii Strashko [Fri, 24 Jul 2020 21:19:43 +0000 (14:19 -0700)]
soc: ti: k3-ringacc: separate soc specific initialization
Separate SoC specific initialization and and OF mach data in preparation of
adding support for more K3 SoCs
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Grygorii Strashko [Fri, 24 Jul 2020 21:19:12 +0000 (14:19 -0700)]
soc: ti: k3-ringacc: add request pair of rings api.
Add new API k3_ringacc_request_rings_pair() to request pair of rings at
once, as in the most cases Rings are used with DMA channels, which need to
request pair of rings - one to feed DMA with descriptors (TX/RX FDQ) and
one to receive completions (RX/TX CQ). This will allow to simplify Ringacc
API users.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Grygorii Strashko [Fri, 24 Jul 2020 21:18:34 +0000 (14:18 -0700)]
soc: ti: k3-ringacc: add ring's flags to dump
Add struct k3_ring *ring->flags to the ring dump.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Peter Ujfalusi [Fri, 24 Jul 2020 21:17:55 +0000 (14:17 -0700)]
soc: ti: k3-ringacc: Move state tracking variables under a struct
Move the free, occ, windex and rindex under a struct. We can use memset to
zero them and it will allow a cleaner way to extend driver functionality in
the future,
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Grygorii Strashko [Fri, 24 Jul 2020 21:16:59 +0000 (14:16 -0700)]
dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema
Convert the K3 NavigatorSS Ring Accelerator bindings documentation to
json-schema.
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Arnd Bergmann [Fri, 24 Jul 2020 18:51:00 +0000 (20:51 +0200)]
Merge tag 'memory-controller-drv-5.9' of git://git./linux/kernel/git/krzk/linux into arm/drivers
Memory controller drivers for v5.9
The drivers/memory directory with memory controller drivers, over the
last days grew in numbers but lacked any coordinated care. The generic
part (device tree helpers) were pulled in through various trees,
depending on driver needs.
The patchset is a first try to improve code quality of memory controller
drivers. Mostly these are non-intrusive fixes for GCC, checkpatch or
sparse warnings. This also fixes missing SPDX tags or improves generic
code quality (whitespace, const correctness).
Last commit appoints also Krzysztof Kozlowski as a maintainer.
* tag 'memory-controller-drv-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (22 commits)
MAINTAINERS: Add Krzysztof Kozlowski as maintainer of memory controllers
memory: samsung: exynos-srom: Describe the Kconfig entry
memory: Describe the MEMORY Kconfig entry
memory: da8xx-ddrctl: Remove unused 'node' variable
memory: fsl_ifc: Fix whitespace issues
memory: pl172: Add GPLv2 SPDX license header
memory: omap-gpmc: Fix whitespace issue
memory: omap-gpmc: Include <linux/sizes.h> for SZ_16M
memory: mtk-smi: Add argument to function pointer definition
memory: brcmstb_dpfe: Remove unneeded braces
memory: brcmstb_dpfe: Constify the contents of string
memory: ti-emif-pm: Fix cast to iomem pointer
memory: ti-aemif: Rename SS to SSTROBE to avoid name conflicts
memory: emif: Silence platform_get_irq() error in driver
memory: emif: Fix whitespace coding style violations
memory: emif: Put constant in comparison on the right side
memory: emif-asm-offsets: Add GPLv2 SPDX license header
memory: of: Remove unneeded extern from function declarations
memory: of: Correct indentation
memory: of: Remove __func__ in device related messages
...
Link: https://lore.kernel.org/r/20200724160314.8543-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Thu, 23 Jul 2020 16:01:23 +0000 (18:01 +0200)]
MAINTAINERS: Add Krzysztof Kozlowski as maintainer of memory controllers
The generic parts of memory controllers (of_memory.[ch]) lacked any
care. The memory controller drivers were not abandoned (usually
picked up by architecture maintainers) but in such case I can take care
about them as well.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:38 +0000 (09:40 +0200)]
memory: samsung: exynos-srom: Describe the Kconfig entry
Write short description about the Exynos SROM controller driver.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:37 +0000 (09:40 +0200)]
memory: Describe the MEMORY Kconfig entry
Write short description about the entire memory controllers section.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:36 +0000 (09:40 +0200)]
memory: da8xx-ddrctl: Remove unused 'node' variable
The variable 'node' is not used. Remove it to silence compile warning:
drivers/memory/da8xx-ddrctl.c: In function 'da8xx_ddrctl_probe':
drivers/memory/da8xx-ddrctl.c:105:22: warning: variable 'node' set but not used [-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:35 +0000 (09:40 +0200)]
memory: fsl_ifc: Fix whitespace issues
Fix minor whitespace and comment issues. Do not break message strings.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:32 +0000 (09:40 +0200)]
memory: pl172: Add GPLv2 SPDX license header
Add GPLv2 license header and remove GPL boiler plate text.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:31 +0000 (09:40 +0200)]
memory: omap-gpmc: Fix whitespace issue
Fix minor whitespace and comment issues. No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:12 +0000 (09:40 +0200)]
memory: omap-gpmc: Include <linux/sizes.h> for SZ_16M
The driver uses SZ_16M which is defined in include/linux/sizes.h. On
ARM it was pulled by other headers but its inclusion is necessary for
compile testing on other architectures.
This fixes build error when compile testing on i386 architecture:
drivers/memory/omap-gpmc.c: In function ‘gpmc_cs_remap’:
drivers/memory/omap-gpmc.c:961:12: error: ‘SZ_16M’ undeclared (first use in this function)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:28 +0000 (09:40 +0200)]
memory: mtk-smi: Add argument to function pointer definition
Fix checkpatch warning:
WARNING: function definition argument 'struct device *' should also have an identifier name
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:27 +0000 (09:40 +0200)]
memory: brcmstb_dpfe: Remove unneeded braces
Single statement blocks don't need braces. Fixes checkpatch warning:
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:26 +0000 (09:40 +0200)]
memory: brcmstb_dpfe: Constify the contents of string
The string itself can be made const for safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:24 +0000 (09:40 +0200)]
memory: ti-emif-pm: Fix cast to iomem pointer
Cast pointer to iomem memory properly to fix sparse warning:
drivers/memory/ti-emif-pm.c:251:38: warning: incorrect type in argument 1 (different address spaces)
drivers/memory/ti-emif-pm.c:251:38: expected void const volatile [noderef] __iomem *addr
drivers/memory/ti-emif-pm.c:251:38: got void *
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:13 +0000 (09:40 +0200)]
memory: ti-aemif: Rename SS to SSTROBE to avoid name conflicts
SS conflicts with compile test build on i386:
drivers/memory/ti-aemif.c:40:0: warning: "SS" redefined
In file included from arch/x86/include/uapi/asm/ptrace.h:6:0,
from arch/x86/include/asm/ptrace.h:7,
from arch/x86/include/asm/math_emu.h:5,
from arch/x86/include/asm/processor.h:13,
from include/linux/mutex.h:19,
from include/linux/notifier.h:14,
from include/linux/clk.h:14,
from drivers/memory/ti-aemif.c:12:
arch/x86/include/uapi/asm/ptrace-abi.h:23:0: note: this is the location of the previous definition
#define SS 16
Use more descriptive name (SSTROBE) to avoid the conflict.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:23 +0000 (09:40 +0200)]
memory: emif: Silence platform_get_irq() error in driver
The platform_get_irq() already prints error message so there is no need
to do it again in the driver.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:22 +0000 (09:40 +0200)]
memory: emif: Fix whitespace coding style violations
Make the code and printed messages slightly more readable. Fixes
checkpatch warnings:
WARNING: quoted string split across lines
ERROR: space prohibited before that ',' (ctx:WxW)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:21 +0000 (09:40 +0200)]
memory: emif: Put constant in comparison on the right side
Fixes checkpatch warning:
WARNING: Comparisons should place the constant on the right side of the test
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:20 +0000 (09:40 +0200)]
memory: emif-asm-offsets: Add GPLv2 SPDX license header
Add GPLv2 license header and remove GPL boiler plate text.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:19 +0000 (09:40 +0200)]
memory: of: Remove unneeded extern from function declarations
Function declarations in headers do not need to come with extern
keyword. Remove them to make the declaration slightly shorter.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:18 +0000 (09:40 +0200)]
memory: of: Correct indentation
Correct indentation to match open parenthesis.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:17 +0000 (09:40 +0200)]
memory: of: Remove __func__ in device related messages
Messages printed by generic of_memory code will still be using device
context so their location/meaning will be known. Printing __func__ is
not needed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 24 Jul 2020 07:40:16 +0000 (09:40 +0200)]
memory: of: Remove unused headers
The of_memory.c does not use platform_device nor linked list.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Arnd Bergmann [Fri, 24 Jul 2020 14:11:54 +0000 (16:11 +0200)]
Merge tag 'mvebu-drivers-5.9-1' of git://git./linux/kernel/git/gclement/mvebu into arm/drivers
mvebu drivers for 5.9 (part 1)
For firmware on the Turris MOX (Armada 3720 based board), add support
ECDSA signatures via debugfs.
* tag 'mvebu-drivers-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
firmware: turris-mox-rwtm: add debugfs documentation
firmware: turris-mox-rwtm: support ECDSA signatures via debugfs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Mon, 20 Jul 2020 11:03:01 +0000 (13:03 +0200)]
memory: samsung: exynos5422-dmc: Do not ignore return code of regmap_read()
Check for regmap_read() return code before using the read value in
following write in exynos5_switch_timing_regs(). Pass reading error
code to the callers.
This does not introduce proper error handling for such failed reads (and
obviously regmap_write() error is still ignored) because the driver
ignored this in all places. Therefor it only fixes reported issue while
matching current driver coding style:
drivers/memory/samsung/exynos5422-dmc.c: In function 'exynos5_switch_timing_regs':
>> drivers/memory/samsung/exynos5422-dmc.c:216:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Arnd Bergmann [Wed, 22 Jul 2020 20:36:18 +0000 (22:36 +0200)]
Merge tag 'qcom-drivers-for-5.9' of git://git./linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.9
For RPMh this fixes an issue where ktime was used during suspend, allows
the driver to be used on ARM targets and some minor cleanups.
It adds support for the latest format version in the socinfo driver and
adds identifiers for SM8250 and SDM630.
SMD-RPM gains compatibles for MSM8994 and MSM8936 and the Qualcomm SCM
gains compatibles MSM8994 and IPQ8074.
The GENI core code gains interconnect path voting and performance level
support, with subsequent patches integrating this with the SPI, I2C,
UART and QSPI drivers.
Following this the KGDB support for the GENI serial driver is improved,
the performance related to chip-select is improved for SPI and QSPI.
* tag 'qcom-drivers-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits)
soc: qcom: geni: Fix NULL pointer dereference
tty: serial: qcom-geni-serial: Drop the icc bw votes in suspend for console
serial: qcom_geni_serial: Always use 4 bytes per TX FIFO word
serial: qcom_geni_serial: Make kgdb work even if UART isn't console
spi: spi-geni-qcom: Get rid of most overhead in prepare_message()
spi: spi-geni-qcom: Set the clock properly at runtime resume
spi: spi-geni-qcom: Avoid clock setting if not needed
spi: spi-qcom-qspi: Set an autosuspend delay of 250 ms
spi: spi-qcom-qspi: Avoid clock setting if not needed
spi: spi-qcom-qspi: Use OPP API to set clk/perf state
firmware: qcom_scm: Add msm8994 compatible
firmware: qcom_scm: Fix legacy convention SCM accessors
<linux/of.h>: add stub for of_get_next_parent() to fix qcom build error
dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
spi: spi-geni-qcom: Use OPP API to set clk/perf state
tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
spi: spi-qcom-qspi: Add interconnect support
spi: spi-geni-qcom: Add interconnect support
spi: spi-geni-qcom: Combine the clock setting code
tty: serial: qcom_geni_serial: Add interconnect support
...
Link: https://lore.kernel.org/r/20200721044812.3429652-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Wed, 22 Jul 2020 20:35:21 +0000 (22:35 +0200)]
Merge tag 'imx-drivers-5.9' of git://git./linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 5.9:
- Update SCU irq code to call pm_system_wakeup() in general MU IRQ
handler, so that system can be waked up when MU IRQ arrives.
- Move i.MX SCU soc driver into imx firmware folder to get it
initialized from i.MX SCU firmware driver.
- Clean up soc-imx-scu driver a bit by using devm_kasprintf().
- Correct postfix setting for cm40 power domain in scu-pd driver.
- Add resource management support for IMX_SCU firmware driver.
- Add more cm4 resources to i.MX SCU power domain driver.
- Select ARM_GIC_V3 from SOC_IMX8M for being able to use GICv3 driver
in AARCH32 mode Linux on AARCH64 hardware.
* tag 'imx-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: select ARM_GIC_V3 for i.MX8M
firmware: imx: Move i.MX SCU soc driver into imx firmware folder
firmware: imx: scu-pd: add more cm4 resources
firmware: imx: add resource management api
firmware: imx: scu-pd: fix cm40 power domain
soc: imx: scu: use devm_kasprintf
firmware: imx: make sure MU irq can wake up system from suspend mode
Link: https://lore.kernel.org/r/20200720085536.24138-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Wed, 22 Jul 2020 20:34:13 +0000 (22:34 +0200)]
Merge tag 'reset-for-v5.9' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.9
This tag moves the reset-simple header out of drivers/reset for use by
drivers outside of drivers/reset, adds a .reset() callback to
reset-simple, converts i.MX reset bindings to json-schema, fixes a
compile warning in the reset-intel-gw driver, and replaces some HTTP
links with HTTPS ones in comments.
* tag 'reset-for-v5.9' of git://git.pengutronix.de/pza/linux:
reset: Replace HTTP links with HTTPS ones
reset: intel: fix a compile warning about REG_OFFSET redefined
dt-bindings: reset: Convert i.MX7 reset to json-schema
dt-bindings: reset: Convert i.MX reset to json-schema
reset: simple: Add reset callback
reset: Move reset-simple header out of drivers/reset
Link: https://lore.kernel.org/r/b718f052e38abbaac599d80645376b75e54aa5bd.camel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Marek Szyprowski [Tue, 21 Jul 2020 18:09:00 +0000 (20:09 +0200)]
soc: samsung: exynos-regulator-coupler: Add simple voltage coupler for Exynos5800
Add a simple custom voltage regulator coupler for Exynos5800 SoCs, which
require coupling between "vdd_arm" and "vdd_int" regulators. This coupler
ensures that the voltage values don't go below the bootloader-selected
operation point during the boot process until the clients set their
constraints. It is achieved by assuming minimal voltage value equal to
the current value if no constraints are set. This also ensures proper
voltage balancing if any of the client driver is missing.
The balancing code comes from the regulator/core.c with the additional
logic for handling regulators without client constraints applied added.
Link: https://lore.kernel.org/r/20200721180900.13844-5-krzk@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Akash Asthana [Fri, 17 Jul 2020 14:32:22 +0000 (20:02 +0530)]
soc: qcom: geni: Fix NULL pointer dereference
pdev struct doesn't exits for the devices whose status are disabled
from DT node, in such cases NULL is returned from 'of_find_device_by_node'
Later when we try to get drvdata from pdev struct NULL pointer dereference
is triggered.
Add a NULL check for return values to fix the issue.
We were hitting this issue when one of QUP is disabled.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes:
048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash")
Reported-by: Sai Prakash Ranjan <saipraka@codeaurora.org>
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Link: https://lore.kernel.org/r/1594996342-26964-1-git-send-email-akashast@codeaurora.org
[bjorn: s/wrapper_pdev/pdev/]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Alexander A. Klimov [Sat, 18 Jul 2020 12:18:15 +0000 (14:18 +0200)]
reset: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Dejin Zheng [Fri, 26 Jun 2020 13:00:41 +0000 (21:00 +0800)]
reset: intel: fix a compile warning about REG_OFFSET redefined
kernel test robot reports a compile warning about REG_OFFSET redefined
in the reset-intel-gw.c after merging commit
e44ab4e14d6f4 ("regmap:
Simplify implementation of the regmap_read_poll_timeout() macro"). the
warning is like that:
drivers/reset/reset-intel-gw.c:18:0: warning: "REG_OFFSET" redefined
#define REG_OFFSET GENMASK(31, 16)
In file included from ./arch/arm/mach-ixp4xx/include/mach/hardware.h:30:0,
from ./arch/arm/mach-ixp4xx/include/mach/io.h:15,
from ./arch/arm/include/asm/io.h:198,
from ./include/linux/io.h:13,
from ./include/linux/iopoll.h:14,
from ./include/linux/regmap.h:20,
from drivers/reset/reset-intel-gw.c:12:
./arch/arm/mach-ixp4xx/include/mach/platform.h:25:0: note: this is the location of the previous definition
#define REG_OFFSET 3
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
c9aef213e38cde ("reset: intel: Add system reset controller driver")
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Marek Behún [Mon, 1 Jun 2020 21:00:50 +0000 (23:00 +0200)]
firmware: turris-mox-rwtm: add debugfs documentation
Add debugfs ABI documentation for the ECDSA signatures.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Marek Behún [Mon, 1 Jun 2020 21:00:49 +0000 (23:00 +0200)]
firmware: turris-mox-rwtm: support ECDSA signatures via debugfs
The firmware on Turris MOX secure processor offers signing messages
with ECDSA private key stored in protected OTP memory.
The optimal solution would be to register an akcipher provider via
kernel's crypto API, but crypto API does not yet support accessing
akcipher API from userspace (and probably won't for some time, see
https://www.spinics.net/lists/linux-crypto/msg38388.html).
At first I tried to put this via standard sysfs API, but the way I
designed it is not compatible with sysfs's standard "one file per
attribute".
This patch therefore adds support for accessing this signature
generation mechanism via debugfs. Since CZ.NIC's Turris MOX is the only
user of this module, the potential future change to akcipher API should
not cause problems, since we can just change our userspace software then.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Arnd Bergmann [Fri, 17 Jul 2020 19:17:19 +0000 (21:17 +0200)]
Merge tag 'tegra-for-5.9-soc' of git://git./linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.9-rc1
This adds missing SoC IDs for Tegra186 and Tegra194 and fixes a typo in
a warning message.
* tag 'tegra-for-5.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Fix typo in APB MISC warning
soc/tegra: fuse: Add Tegra186 and Tegra194 SoC IDs
Link: https://lore.kernel.org/r/20200717161300.1661002-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 17 Jul 2020 19:15:18 +0000 (21:15 +0200)]
Merge tag 'tegra-for-5.9-memory' of git://git./linux/kernel/git/tegra/linux into arm/drivers
memory: tegra: Changes for v5.9-rc1
This contains the Tegra210 EMC frequency scaling support that didn't
make it into v5.8. In addition there are a couple of cleanups and minor
fixes.
* tag 'tegra-for-5.9-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add Tegra132 compatible string match
memory: tegra: Fix KCONFIG variables for Tegra186 and Tegra194
memory: tegra: Delete some dead code
memory: tegra: Avoid unused function warnings
memory: tegra: Drop <linux/clk-provider.h>
memory: tegra: Fix an error handling path in tegra186_emc_probe()
memory: tegra30-emc: Poll EMC-CaR handshake instead of waiting for interrupt
memory: tegra20-emc: Poll EMC-CaR handshake instead of waiting for interrupt
memory: tegra: Support derated timings on Tegra210
memory: tegra: Add EMC scaling sequence code for Tegra210
memory: tegra: Add EMC scaling support code for Tegra210
memory: tegra: Make debugfs permissions human-readable
Link: https://lore.kernel.org/r/20200717161300.1661002-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 17 Jul 2020 19:13:41 +0000 (21:13 +0200)]
Merge tag 'tegra-for-5.9-firmware' of git://git./linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.9-rc1
This has a few cleanups and the addition of a new mechanism to query
debug information from the BPMP.
* tag 'tegra-for-5.9-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Update BPMP ABI
firmware: tegra: Add support for in-band debug
firmware: tegra: Prepare for supporting in-band debugfs
firmware: tegra: Use consistent return variable name
firmware: tegra: Add return code checks and increase debugfs size
Link: https://lore.kernel.org/r/20200717161300.1661002-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sudeep Holla [Fri, 17 Jul 2020 14:04:05 +0000 (15:04 +0100)]
firmware: arm_scmi: Use NULL instead of integer 0 for rate pointer
Kbuild test robot reports the following sparse warning:
drivers/firmware/arm_scmi/clock.c:142:21:
sparse: Using plain integer as NULL pointer
Use NULL pointer instead of integer 0 for rate pointer and fix the
warning.
Link: https://lore.kernel.org/r/20200717140405.17905-1-sudeep.holla@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 17 Jul 2020 14:06:25 +0000 (16:06 +0200)]
Merge tag 'renesas-drivers-for-v5.9-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.9
- Add core support for the new RZ/G2H (R8A774E1) SoC, including System
Controller (SYSC) and Reset (RST) support.
* tag 'renesas-drivers-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rcar-rst: Add support for RZ/G2H
soc: renesas: Identify RZ/G2H
soc: renesas: Add Renesas R8A774E1 config option
soc: renesas: rcar-sysc: Add r8a774e1 support
clk: renesas: Add r8a774e1 CPG Core Clock Definitions
dt-bindings: power: Add r8a774e1 SYSC power domain definitions
Link: https://lore.kernel.org/r/20200717112427.26032-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Thierry Reding [Fri, 17 Jul 2020 13:41:42 +0000 (15:41 +0200)]
soc/tegra: fuse: Fix typo in APB MISC warning
The hardware block is called APB MISC, not ABP MISC, so fix the warning
to use the correct name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sandipan Patra [Fri, 26 Jun 2020 08:44:01 +0000 (10:44 +0200)]
soc/tegra: fuse: Add Tegra186 and Tegra194 SoC IDs
SoC IDs for these generations had never been defined. Do so now.
Signed-off-by: Sandipan Patra <spatra@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Arnd Bergmann [Thu, 16 Jul 2020 20:12:49 +0000 (22:12 +0200)]
Merge tag 'v5.8-next-soc' of git://git./linux/kernel/git/matthias.bgg/linux into arm/drivers
add new functions to cmdq helper functions
- assign value to register
- export finalize function and don't call explicitely from flush async
- set specific event
* tag 'v5.8-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: cmdq: add set event function
soc: mediatek: cmdq: export finalize function
soc: mediatek: cmdq: add assign function
Link: https://lore.kernel.org/r/01399fb4-b2d0-e41b-dfd9-f2deba0ef651@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Thierry Reding [Fri, 12 Jun 2020 08:59:00 +0000 (10:59 +0200)]
memory: tegra: Add Tegra132 compatible string match
Ensure that the driver will bind against the Tegra132 instantiation of
the external memory controller. While the two are roughly the same from
a capability perspective, they do require some incompatible changes to
the programming sequences and therefore need separate compatible
strings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Jon Hunter [Sun, 12 Jul 2020 10:01:18 +0000 (11:01 +0100)]
firmware: tegra: Update BPMP ABI
Update the BPMP ABI to align with the the latest version.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Jon Hunter [Sun, 12 Jul 2020 10:01:17 +0000 (11:01 +0100)]
firmware: tegra: Add support for in-band debug
Add support for retrieving BPMP debug information via in-band messaging
as opposed to using shared-memory which older BPMP firmware used. Note
that it is possible to detect at runtime whether the BPMP firmware being
used supports the in-band messaging for retrieving the debug
informaation. Therefore, if the BPMP firmware supports the in-band
messaging for debug use this and otherwise fall-back to using shared
memory.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Jon Hunter [Sun, 12 Jul 2020 10:01:16 +0000 (11:01 +0100)]
firmware: tegra: Prepare for supporting in-band debugfs
Currently, BPMP debug information is accessible via the Linux debugfs
file-system using a shared-memory scheme. More recent BPMP firmware now
supports accessing the debug information by in-band messaging which does
not require shared-memory. To prepare for adding in-band debugfs support
for the BPMP, move the shared-memory specific initialisation from the
tegra_bpmp_init_debugfs() into a sub-function.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Jon Hunter [Sun, 12 Jul 2020 10:01:15 +0000 (11:01 +0100)]
firmware: tegra: Use consistent return variable name
Most functions in the BPMP driver use 'err' as the return variable
name but there are a few places that use 'ret'. Let's use 'err' to
be consistent.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Timo Alho [Sun, 12 Jul 2020 10:01:14 +0000 (11:01 +0100)]
firmware: tegra: Add return code checks and increase debugfs size
Add checking of the BPMP-FW return code values for MRQ_DEBUGFS calls.
Also, development versions of the firmware may have debugfs with a
directory structure larger than 256 KiB. Hence increase the size of the
memory buffer to accommodate those firmware revisions.
And finally, ensure that no access outside of allocated memory buffer
happens in case BPMP-FW returns an invalid response size (nbytes) from
mrq_debugfs_dumpdir() call.
Signed-off-by: Timo Alho <talho@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Jon Hunter [Sun, 12 Jul 2020 10:33:47 +0000 (11:33 +0100)]
memory: tegra: Fix KCONFIG variables for Tegra186 and Tegra194
Commit
a127e690b051 ("memory: tegra: Add support for the Tegra194 memory
controller") and commit
4e04b88633ae ("memory: tegra: Only include
support for enabled SoCs") incorrectly added the KCONFIG variables
CONFIG_ARCH_TEGRA186_SOC and CONFIG_ARCH_TEGRA194_SOC to the Tegra EMC
driver. These KCONFIG variables do not exist and prevent the EMC driver
from being probed on Tegra186 and Tegra194. These KCONFIG variable
names are simply missing one underscore and so fix this by adding the
necessary underscore to the variable names.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Arnd Bergmann [Tue, 14 Jul 2020 12:48:44 +0000 (14:48 +0200)]
Merge tag 'scmi-updates-5.9' of git://git./linux/kernel/git/sudeep.holla/linux into arm/drivers
ARM SCMI/SCPI updates for v5.9
The main addition for this time is the support for platform notifications.
SCMI protocol specification allows the platform to signal events to the
interested agents via notification messages. We are adding support for
the dispatch and delivery of such notifications to the interested users
inside the kernel.
Other than that, there are minor changes like checking and using the
fast_switch capability quering the firmware instead of doing it
unconditionally(using polling mode transfer), cosmetic trace update,
use of HAVE_ARM_SMCCC_DISCOVERY instead of ARM_PSCI_FW and a fix in
scmi clock registration logic for all the clocks with discrete rates.
* tag 'scmi-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Remove fixed size fields from reports/scmi_event_header
firmware: arm_scmi: Remove unneeded __packed attribute
firmware: arm_scmi: Remove zero-length array in SCMI notifications
firmware: arm_scmi: Provide a missing function param description
clk: scmi: Fix min and max rate when registering clocks with discrete rates
firmware: arm_scmi: Keep the discrete clock rates sorted
firmware: arm_scmi: Add base notifications support
firmware: arm_scmi: Add reset notifications support
firmware: arm_scmi: Add sensor notifications support
firmware: arm_scmi: Add perf notifications support
firmware: arm_scmi: Add power notifications support
firmware: arm_scmi: Enable notification core
firmware: arm_scmi: Add notification dispatch and delivery
firmware: arm_scmi: Add notification callbacks-registration
firmware: arm_scmi: Add notification protocol-registration
firmware: arm_scmi: Fix SCMI genpd domain probing
firmware: arm_scmi: Use HAVE_ARM_SMCCC_DISCOVERY instead of ARM_PSCI_FW
cpufreq: arm_scmi: Set fast_switch_possible conditionally
firmware: arm_scmi: Add fast_switch_possible() interface
firmware: arm_scmi: Use signed integer to report transfer status
Link: https://lore.kernel.org/r/20200713161410.12324-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rajendra Nayak [Tue, 14 Jul 2020 05:31:49 +0000 (11:01 +0530)]
tty: serial: qcom-geni-serial: Drop the icc bw votes in suspend for console
When using the geni-serial as console, its important to be
able to hit the lowest possible power state in suspend,
even with no_console_suspend.
The only thing that prevents it today on platforms like the sc7180
is the interconnect BW votes, which we certainly don't need when
the system is in suspend. So in the suspend handler mark them as
ACTIVE_ONLY (0x3) and on resume switch them back to the ALWAYS tag (0x7)
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1594704709-26072-1-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Douglas Anderson [Fri, 26 Jun 2020 20:00:33 +0000 (13:00 -0700)]
serial: qcom_geni_serial: Always use 4 bytes per TX FIFO word
The geni serial driver had a rule that we'd only use 1 byte per FIFO
word for the TX FIFO if we were being used for the serial console.
This is ugly and a bit of a pain. It's not too hard to fix, so fix
it.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200626125844.2.Iabd56347670b9e4e916422773aba5b27943d19ee@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Douglas Anderson [Fri, 26 Jun 2020 20:00:32 +0000 (13:00 -0700)]
serial: qcom_geni_serial: Make kgdb work even if UART isn't console
The geni serial driver had the rather sketchy hack in it where it
would adjust the number of bytes per RX FIFO word from 4 down to 1 if
it detected that CONFIG_CONSOLE_POLL was enabled (for kgdb) and this
was a console port (defined by the kernel directing output to this
port via the "console=" command line argument).
The problem with that sketchy hack is that it's possible to run kgdb
over a serial port even if it isn't used for console.
Let's avoid the hack by simply handling the 4-bytes-per-FIFO word case
for kdb. We'll have to have a (very small) cache but that should be
fine.
A nice side effect of this patch is that an agetty (or similar)
running on this port is less likely to drop characters. We'll
have roughly 4 times the RX FIFO depth than we used to now.
NOTE: the character cache here isn't shared between the polling API
and the non-polling API. That means that, technically, the polling
API could eat a few extra bytes. This doesn't seem to pose a huge
problem in reality because we'll only get several characters per FIFO
word if those characters are all received at nearly the same time and
we don't really expect non-kgdb characters to be sent to the same port
as kgdb at the exact same time we're exiting kgdb.
ALSO NOTE: we still have the sketchy hack for setting the number of
bytes per TX FIFO word in place, but that one is less bad. kgdb
doesn't have any problem with this because it always just sends 1 byte
at a time and waits for it to finish. The TX FIFO hack is only really
needed for console output. In any case, a future patch will remove
that hack, too.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200626125844.1.I8546ecb6c5beb054f70c5302d1a7293484212cd1@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Douglas Anderson [Thu, 2 Jul 2020 00:45:09 +0000 (17:45 -0700)]
spi: spi-geni-qcom: Get rid of most overhead in prepare_message()
There's a bunch of overhead in spi-geni-qcom's prepare_message. Get
rid of it. Before this change spi_geni_prepare_message() took around
14.5 us. After this change, spi_geni_prepare_message() takes about
1.75 us (as measured by ftrace).
What's here:
* We're always in FIFO mode, so no need to call it for every transfer.
This avoids a whole ton of readl/writel calls.
* We don't need to write a whole pile of config registers if the mode
isn't changing. Cache the last mode and only do the work if needed.
* For several registers we were trying to do read/modify/write, but
there was no reason. The registers only have one thing in them, so
just write them.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200701174506.3.I2b3d7aeb1ea622335482cce60c58d2f8381e61dd@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Douglas Anderson [Thu, 9 Jul 2020 14:40:49 +0000 (07:40 -0700)]
spi: spi-geni-qcom: Set the clock properly at runtime resume
In the patch ("spi: spi-geni-qcom: Avoid clock setting if not needed")
we avoid a whole pile of clock code. As part of that, we should have
restored the clock at runtime resume. Do that.
It turns out that, at least with today's configurations, this doesn't
actually matter. That's because none of the current device trees have
an OPP table for geni SPI yet. That makes dev_pm_opp_set_rate(dev, 0)
a no-op. This is why it wasn't noticed in the testing of the original
patch. It's still a good idea to fix, though.
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200709074037.v2.1.I0b701fc23eca911a5bde4ae4fa7f97543d7f960e@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Douglas Anderson [Thu, 2 Jul 2020 00:45:07 +0000 (17:45 -0700)]
spi: spi-geni-qcom: Avoid clock setting if not needed
Every SPI transfer could have a different clock rate. The
spi-geni-qcom controller code to deal with this was never very well
optimized and has always had a lot of code plus some calls into the
clk framework which, at the very least, would grab a mutex. However,
until recently, the overhead wasn't _too_ much. That changed with
commit
0e3b8a81f5df ("spi: spi-geni-qcom: Add interconnect support")
we're now calling geni_icc_set_bw(), which leads to a bunch of math
plus:
geni_icc_set_bw()
icc_set_bw()
apply_constraints()
qcom_icc_set()
qcom_icc_bcm_voter_commit()
rpmh_invalidate()
rpmh_write_batch()
...and those rpmh commands can be a bit beefy if you call them too
often.
We already know what speed we were running at before, so if we see
that nothing has changed let's avoid the whole pile of code.
On my hardware, this made spi_geni_prepare_message() drop down from
~145 us down to ~14 us.
NOTE: Potentially it might also make sense to add some code into the
interconnect framework to avoid executing so much code when bandwidth
isn't changing, but even if we did that we still want to short circuit
here to save the extra math / clock calls.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Akash Asthana<akashast@codeaurora.org>
Fixes:
0e3b8a81f5df ("spi: spi-geni-qcom: Add interconnect support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200701174506.1.Icfdcee14649fc0a6c38e87477b28523d4e60bab3@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Douglas Anderson [Thu, 9 Jul 2020 14:51:45 +0000 (07:51 -0700)]
spi: spi-qcom-qspi: Set an autosuspend delay of 250 ms
In commit
cff80645d6d3 ("spi: spi-qcom-qspi: Add interconnect support")
the spi_geni_runtime_suspend() and spi_geni_runtime_resume()
became a bit slower. Measuring on my hardware I see numbers in the
hundreds of microseconds now.
Let's use autosuspend to help avoid some of the overhead. Now if
we're doing a bunch of transfers we won't need to be constantly
chruning.
The number 250 ms for the autosuspend delay was picked a bit
arbitrarily, so if someone has measurements showing a better value we
could easily change this.
Fixes:
cff80645d6d3 ("spi: spi-qcom-qspi: Add interconnect support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Link: https://lore.kernel.org/r/20200709075113.v2.2.I3c56d655737c89bd9b766567a04b0854db1a4152@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Douglas Anderson [Thu, 9 Jul 2020 14:51:44 +0000 (07:51 -0700)]
spi: spi-qcom-qspi: Avoid clock setting if not needed
As per recent changes to the spi-qcom-qspi, now when we set the clock
we'll call into the interconnect framework and also call the OPP API.
Those are expensive operations. Let's avoid calling them if possible.
This has a big impact on getting transfer rates back up to where they
were (or maybe slightly better) before those patches landed.
Fixes:
cff80645d6d3 ("spi: spi-qcom-qspi: Add interconnect support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Link: https://lore.kernel.org/r/20200709075113.v2.1.Ia7cb4f41ce93d37d0a764b47c8a453ce9e9c70ef@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Rajendra Nayak [Fri, 3 Jul 2020 09:41:31 +0000 (15:11 +0530)]
spi: spi-qcom-qspi: Use OPP API to set clk/perf state
QSPI needs to vote on a performance state of a power domain depending on
the clock rate. Add support for it by specifying the perf state/clock rate
as an OPP table in device tree.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Alok Chauhan <alokc@codeaurora.org>
Cc: Akash Asthana <akashast@codeaurora.org>
Cc: linux-spi@vger.kernel.org
Link: https://lore.kernel.org/r/1593769293-6354-2-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Wed, 24 Jun 2020 15:00:59 +0000 (17:00 +0200)]
firmware: qcom_scm: Add msm8994 compatible
This change adds a compatible for msm8994,
which requires no additional clocks for
scm to probe correctly.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200624150107.76234-2-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Jonathan McDowell [Sat, 4 Jul 2020 17:23:34 +0000 (18:23 +0100)]
firmware: qcom_scm: Fix legacy convention SCM accessors
The move to a combined driver for the QCOM SCM hardware changed the
io_writel and io_readl helpers to use non-atomic calls, despite the
commit message saying that atomic was a better option. This breaks these
helpers on hardware that uses the old legacy convention (access fails
with a -95 return code). Switch back to using the atomic calls.
Observed as a failure routing GPIO interrupts to the Apps processor on
an IPQ8064; fix is confirmed as correctly allowing the interrupts to be
routed and observed.
Reviewed-by: Elliot Berman <eberman@codeaurora.org>
Fixes:
57d3b816718c ("firmware: qcom_scm: Remove thin wrappers")
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Link: https://lore.kernel.org/r/20200704172334.GA759@earth.li
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Arnd Bergmann [Mon, 13 Jul 2020 13:11:42 +0000 (15:11 +0200)]
Merge tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Enable multi-stage OP-TEE bus enumeration
Probes drivers on the OP-TEE bus in two steps. First for drivers which
do not depend on tee-supplicant. After tee-supplicant has been started
probe the devices which do depend on tee-supplicant.
Also introduces driver which uses an OP-TEE based fTPM Trusted
Application depends on tee-supplicant NV RAM implementation based on
RPMB secure storage.
* tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tpm_ftpm_tee: register driver on TEE bus
optee: enable support for multi-stage bus enumeration
optee: use uuid for sysfs driver entry
Link: https://lore.kernel.org/r/20200710085230.GA1312913@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Peng Fan [Fri, 10 Jul 2020 01:43:53 +0000 (09:43 +0800)]
soc: imx: select ARM_GIC_V3 for i.MX8M
Select ARM_GIC_V3, then it is able to use gic v3 driver in aarch32
mode linux on aarch64 hardware. For aarch64 mode, it not hurts
to select ARM_GIC_V3.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cristian Marussi [Fri, 10 Jul 2020 13:39:19 +0000 (14:39 +0100)]
firmware: arm_scmi: Remove fixed size fields from reports/scmi_event_header
Event reports are used to convey information describing events to the
registered user-callbacks: they are necessarily derived from the underlying
raw SCMI events' messages but they are not meant to expose or directly
mirror any of those messages data layout, which belong to the protocol
layer.
Using fixed size types for report fields, mirroring messages structure,
is at odd with this: get rid of them using more generic, equivalent,
typing.
Substitute scmi_event_header fixed size fields with generic types too and
shuffle around fields definitions to minimize implicit padding while
adapting involved functions.
Link: https://lore.kernel.org/r/20200710133919.39792-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Fri, 10 Jul 2020 13:39:18 +0000 (14:39 +0100)]
firmware: arm_scmi: Remove unneeded __packed attribute
Remove __packed attribute from struct scmi_event_header.
Link: https://lore.kernel.org/r/20200710133919.39792-2-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cristian Marussi [Fri, 10 Jul 2020 13:39:17 +0000 (14:39 +0100)]
firmware: arm_scmi: Remove zero-length array in SCMI notifications
Substitute zero-length array defined in scmi_base_error_report with
a flexible length array definition.
Link: https://lore.kernel.org/r/20200710133919.39792-1-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Thu, 9 Jul 2020 15:31:55 +0000 (16:31 +0100)]
firmware: arm_scmi: Provide a missing function param description
gcc as well as clang now produce warnings for missing kerneldoc function
parameter.
Fix the following W=1 kernel build warning:
drivers/firmware/arm_scmi/smc.c:32:
warning: Function parameter or member 'shmem_lock' not described in 'scmi_smc'
Link: https://lore.kernel.org/r/20200709153155.22573-1-sudeep.holla@arm.com
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Thu, 9 Jul 2020 08:17:05 +0000 (09:17 +0100)]
clk: scmi: Fix min and max rate when registering clocks with discrete rates
Currently we are not initializing the scmi clock with discrete rates
correctly. We fetch the min_rate and max_rate value only for clocks with
ranges and ignore the ones with discrete rates. This will lead to wrong
initialization of rate range when clock supports discrete rate.
Fix this by using the first and the last rate in the sorted list of the
discrete clock rates while registering the clock.
Link: https://lore.kernel.org/r/20200709081705.46084-2-sudeep.holla@arm.com
Fixes:
6d6a1d82eaef7 ("clk: add support for clocks provided by SCMI")
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reported-and-tested-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Marian-Cristian Rotariu [Tue, 7 Jul 2020 16:18:07 +0000 (17:18 +0100)]
soc: renesas: rcar-rst: Add support for RZ/G2H
Add support for RZ/G2H (R8A774E1) to the R-Car RST driver.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Marian-Cristian Rotariu [Tue, 7 Jul 2020 16:18:01 +0000 (17:18 +0100)]
soc: renesas: Identify RZ/G2H
This patch adds support for identifying the RZ/G2H (r8a774e1) SoC.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Marian-Cristian Rotariu [Tue, 7 Jul 2020 16:18:02 +0000 (17:18 +0100)]
soc: renesas: Add Renesas R8A774E1 config option
Add configuration option for the RZ/G2H (R8A774E1) SoC.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Marian-Cristian Rotariu [Tue, 7 Jul 2020 16:18:05 +0000 (17:18 +0100)]
soc: renesas: rcar-sysc: Add r8a774e1 support
Add support for RZ/G2H (R8A774E1) SoC power areas to the R-Car SYSC
driver.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Geert Uytterhoeven [Mon, 13 Jul 2020 08:33:35 +0000 (10:33 +0200)]
Merge tag 'renesas-r8a774e1-dt-binding-defs-tag' into renesas-drivers-for-v5.9
Renesas RZ/G2H DT Binding Definitions
Clock and Power Domain definitions for the Renesas RZ/G2H (R8A774E1)
SoC, shared by driver and DT source files.
Marian-Cristian Rotariu [Tue, 7 Jul 2020 16:18:09 +0000 (17:18 +0100)]
clk: renesas: Add r8a774e1 CPG Core Clock Definitions
Add all RZ/G2H Clock Pulse Generator Core Clock Outputs, as listed in
Table 11.2 ("List of Clocks [RZ/G2H]") of the RZ/G2H Hardware User's
Manual.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Marian-Cristian Rotariu [Tue, 7 Jul 2020 16:18:04 +0000 (17:18 +0100)]
dt-bindings: power: Add r8a774e1 SYSC power domain definitions
This patch adds power domain indices for the RZ/G2H (r8a774e1) SoC.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Anson Huang [Thu, 25 Jun 2020 21:14:07 +0000 (05:14 +0800)]
firmware: imx: Move i.MX SCU soc driver into imx firmware folder
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into imx firmware folder
and initialized by i.MX SCU firmware driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Randy Dunlap [Mon, 29 Jun 2020 16:43:52 +0000 (09:43 -0700)]
<linux/of.h>: add stub for of_get_next_parent() to fix qcom build error
Fix a (COMPILE_TEST) build error when CONFIG_OF is not set/enabled
by adding a stub for of_get_next_parent().
../drivers/soc/qcom/qcom-geni-se.c:819:11: error: implicit declaration of function 'of_get_next_parent'; did you mean 'of_get_parent'? [-Werror=implicit-function-declaration]
../drivers/soc/qcom/qcom-geni-se.c:819:9: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
Fixes:
048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash")
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/ce0d7561-ff93-d267-b57a-6505014c728c@infradead.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Sudeep Holla [Thu, 9 Jul 2020 08:17:04 +0000 (09:17 +0100)]
firmware: arm_scmi: Keep the discrete clock rates sorted
Instead of relying on the firmware to keep the clock rates sorted, let
us sort the list. This is not essential for clock layer but it helps
to find the min and max rates easily from the list.
Link: https://lore.kernel.org/r/20200709081705.46084-1-sudeep.holla@arm.com
Fixes:
5f6c6430e904 ("firmware: arm_scmi: add initial support for clock protocol")
Reported-and-tested-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Maxim Uvarov [Thu, 18 Jun 2020 13:52:51 +0000 (16:52 +0300)]
tpm_ftpm_tee: register driver on TEE bus
OP-TEE based fTPM Trusted Application depends on tee-supplicant to
provide NV RAM implementation based on RPMB secure storage. So this
dependency can be resolved via TEE bus where we only invoke fTPM
driver probe once fTPM device is registered on the bus which is only
true after the tee-supplicant is up and running. Additionally, TEE bus
provides auto device enumeration.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Suggested-by: Sumit Garg <sumit.garg@linaro.org>
Suggested-by: Arnd Bergmann <arnd@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Maxim Uvarov [Thu, 18 Jun 2020 13:52:50 +0000 (16:52 +0300)]
optee: enable support for multi-stage bus enumeration
Some drivers (like ftpm) can operate only after tee-supplicant
runs because of tee-supplicant provides things like storage
services (rpmb, shm). This patch splits probe of non tee-supplicant
dependable drivers to the early stage, and after tee-supplicant run
probe other drivers.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Suggested-by: Sumit Garg <sumit.garg@linaro.org>
Suggested-by: Arnd Bergmann <arnd@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Maxim Uvarov [Thu, 18 Jun 2020 13:52:49 +0000 (16:52 +0300)]
optee: use uuid for sysfs driver entry
With the evolving use-cases for TEE bus, now it's required to support
multi-stage enumeration process. But using a simple index doesn't
suffice this requirement and instead leads to duplicate sysfs entries.
So instead switch to use more informative device UUID for sysfs entry
like:
/sys/bus/tee/devices/optee-ta-<uuid>
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Arnd Bergmann [Mon, 6 Jul 2020 19:05:20 +0000 (21:05 +0200)]
Merge tag 'soc-attr-updates-5.9' of git://git./linux/kernel/git/sudeep.holla/linux into arm/drivers
SoC attributes update for v5.9
1. Addition of ARM SMCCC ARCH_SOC_ID support
2. Usage of the custom soc attribute groups already supported in the
infrastucture instead of device_create_file which eliminates the need
for any cleanup when soc is unregistered
3. Minor clean up switching to use standard DEVICE_ATTR_RO() instead of
direct __ATTR
* tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: smccc: Add ARCH_SOC_ID support
ARM: OMAP2: Use custom soc attribute group instead of device_create_file
ARM: OMAP2: Switch to use DEVICE_ATTR_RO()
soc: ux500: Use custom soc attribute group instead of device_create_file
soc: ux500: Switch to use DEVICE_ATTR_RO()
soc: integrator: Use custom soc attribute group instead of device_create_file
soc: integrator: Switch to use DEVICE_ATTR_RO()
soc: realview: Use custom soc attribute group instead of device_create_file
soc: realview: Switch to use DEVICE_ATTR_RO()
Link: https://lore.kernel.org/r/20200706165312.40697-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sudeep Holla [Thu, 25 Jun 2020 09:59:39 +0000 (10:59 +0100)]
firmware: smccc: Add ARCH_SOC_ID support
SMCCC v1.2 adds a new optional function SMCCC_ARCH_SOC_ID to obtain a
SiP defined SoC identification value. Add support for the same.
Also using the SoC bus infrastructure, let us expose the platform
specific SoC atrributes under sysfs.
There are various ways in which it can be represented in shortened form
for efficiency and ease of parsing for userspace. The chosen form is
described in the ABI document.
Link: https://lore.kernel.org/r/20200625095939.50861-1-sudeep.holla@arm.com
Cc: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Sat, 23 May 2020 17:08:59 +0000 (18:08 +0100)]
ARM: OMAP2: Use custom soc attribute group instead of device_create_file
Commit
c31e73121f4c ("base: soc: Handle custom soc information sysfs
entries") introduced custom soc attribute group in soc_device_attribute
structure but there are no users treewide. While trying to understand
the motivation and tried to use it, it was found lot of existing custom
attributes can moved to use it instead of device_create_file.
Though most of these never remove/cleanup the custom attribute as they
never call soc_device_unregister, using these custom attribute group
eliminate the need for any cleanup as the driver infrastructure will
take care of that.
Let us remove device_create_file and start using the custom attribute
group in soc_device_attribute.
Link: https://lore.kernel.org/r/20200523170859.50003-9-sudeep.holla@arm.com
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Sat, 23 May 2020 17:08:58 +0000 (18:08 +0100)]
ARM: OMAP2: Switch to use DEVICE_ATTR_RO()
Move device attributes to DEVICE_ATTR_RO() as that would make things
a lot more "obvious" what is happening over the existing __ATTR usage.
Link: https://lore.kernel.org/r/20200523170859.50003-8-sudeep.holla@arm.com
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Sat, 23 May 2020 17:08:57 +0000 (18:08 +0100)]
soc: ux500: Use custom soc attribute group instead of device_create_file
Commit
c31e73121f4c ("base: soc: Handle custom soc information sysfs
entries") introduced custom soc attribute group in soc_device_attribute
structure but there are no users treewide. While trying to understand
the motivation and tried to use it, it was found lot of existing custom
attributes can moved to use it instead of device_create_file.
Though most of these never remove/cleanup the custom attribute as they
never call soc_device_unregister, using these custom attribute group
eliminate the need for any cleanup as the driver infrastructure will
take care of that.
Let us remove device_create_file and start using the custom attribute
group in soc_device_attribute.
Link: https://lore.kernel.org/r/20200523170859.50003-7-sudeep.holla@arm.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Sat, 23 May 2020 17:08:56 +0000 (18:08 +0100)]
soc: ux500: Switch to use DEVICE_ATTR_RO()
Move device attributes to DEVICE_ATTR_RO() as that would make things
a lot more "obvious" what is happening over the existing __ATTR usage.
Link: https://lore.kernel.org/r/20200523170859.50003-6-sudeep.holla@arm.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Sat, 23 May 2020 17:08:55 +0000 (18:08 +0100)]
soc: integrator: Use custom soc attribute group instead of device_create_file
Commit
c31e73121f4c ("base: soc: Handle custom soc information sysfs
entries") introduced custom soc attribute group in soc_device_attribute
structure but there are no users treewide. While trying to understand
the motivation and tried to use it, it was found lot of existing custom
attributes can moved to use it instead of device_create_file.
Though most of these never remove/cleanup the custom attribute as they
never call soc_device_unregister, using these custom attribute group
eliminate the need for any cleanup as the driver infrastructure will
take care of that.
Let us remove device_create_file and start using the custom attribute
group in soc_device_attribute.
Link: https://lore.kernel.org/r/20200523170859.50003-5-sudeep.holla@arm.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Sudeep Holla [Sat, 23 May 2020 17:08:54 +0000 (18:08 +0100)]
soc: integrator: Switch to use DEVICE_ATTR_RO()
Move device attributes to DEVICE_ATTR_RO() as that would make things
a lot more "obvious" what is happening over the existing __ATTR usage.
Link: https://lore.kernel.org/r/20200523170859.50003-4-sudeep.holla@arm.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>