OSDN Git Service
Eino-Ville Talvala [Wed, 25 Sep 2013 19:29:27 +0000 (12:29 -0700)]
am
89cfe208: Merge "Camera3: Add PASSIVE_UNFOCUSED AF state and clean up INACTIVE" into klp-dev
* commit '
89cfe20899d41e1c96efc20e3f203d3f1dba71cd':
Camera3: Add PASSIVE_UNFOCUSED AF state and clean up INACTIVE
Eino-Ville Talvala [Wed, 25 Sep 2013 19:27:54 +0000 (19:27 +0000)]
Merge "Camera3: Add PASSIVE_UNFOCUSED AF state and clean up INACTIVE" into klp-dev
Zhijun He [Wed, 25 Sep 2013 02:29:53 +0000 (19:29 -0700)]
am
3bf3b45f: Camera2 Test: skip some tests for limited hardware level
* commit '
3bf3b45f2d5eb43b74e1a46ff03ed3e2142b1b38':
Camera2 Test: skip some tests for limited hardware level
Zhijun He [Thu, 19 Sep 2013 06:42:12 +0000 (23:42 -0700)]
Camera2 Test: skip some tests for limited hardware level
Bug:
10388724
Change-Id: Ifd13f72f1b7ff78cf50dc1c238f17c4b4e90d9b0
Eino-Ville Talvala [Sat, 21 Sep 2013 00:24:50 +0000 (17:24 -0700)]
Camera3: Add PASSIVE_UNFOCUSED AF state and clean up INACTIVE
Needed to support the real case of continuous focus giving up on a
scene for a while (say, a blank wall), during which we shouldn't claim
the lens is in motion.
Also add new states for INACTIVE to clarify it as the starting state
after mode transitions or enabling AF/AE/AWB.
Bug:
10860639
Bug:
10446772
Change-Id: Ie4c1ac73e5a9eb6d1894d83dbded49a2767a8ffd
Zhijun He [Fri, 20 Sep 2013 04:01:20 +0000 (21:01 -0700)]
am
60cbb526: Camera2 Test: Fix module and burst test issues
* commit '
60cbb52613d212236de49b4f22fe059585f8c1b2':
Camera2 Test: Fix module and burst test issues
Zhijun He [Wed, 18 Sep 2013 16:44:19 +0000 (09:44 -0700)]
Camera2 Test: Fix module and burst test issues
Bug:
10388724
Change-Id: Idc404cf8a7a96c00941aa8f1880734a236cb3737
Zhijun He [Wed, 18 Sep 2013 01:29:35 +0000 (18:29 -0700)]
am
b3ac07c0: Camera2 Tests: fix some sanity checks
* commit '
b3ac07c0028b0afe8f9b009e37af90ec9a697b44':
Camera2 Tests: fix some sanity checks
Zhijun He [Tue, 17 Sep 2013 23:51:06 +0000 (16:51 -0700)]
Camera2 Tests: fix some sanity checks
Remove the requirement of HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED and make and
fix some minor issues.
Bug:
10388724
Change-Id: I18f0ea60f87902d6c2bbaca53957a91953866c40
Rom Lemarchand [Fri, 13 Sep 2013 20:20:43 +0000 (13:20 -0700)]
am
cd996be7: Merge "Initial interface for MemoryTrackerHAL" into klp-dev
* commit '
cd996be7791b3f78e925532d5820da06d58cf635':
Initial interface for MemoryTrackerHAL
Zhijun He [Fri, 13 Sep 2013 20:20:09 +0000 (13:20 -0700)]
am
2a512b49: Merge "Camera2 Test: check the right result metadata" into klp-dev
* commit '
2a512b49e028b5714782ab69cba9662e01e25016':
Camera2 Test: check the right result metadata
Rom Lemarchand [Fri, 13 Sep 2013 18:23:56 +0000 (18:23 +0000)]
Merge "Initial interface for MemoryTrackerHAL" into klp-dev
Zhijun He [Fri, 13 Sep 2013 14:31:07 +0000 (14:31 +0000)]
Merge "Camera2 Test: check the right result metadata" into klp-dev
Alex Ray [Thu, 12 Sep 2013 16:12:47 +0000 (09:12 -0700)]
am
d9d105a0: consumer_ir: add array length to get carrier freq
* commit '
d9d105a0ce6bbaa8d1d1cf70a255612a5dd33701':
consumer_ir: add array length to get carrier freq
Zhijun He [Sun, 8 Sep 2013 17:56:24 +0000 (10:56 -0700)]
Camera2 Test: check the right result metadata
We need check the right result metadata by looking for the right request id.
Bug:
10710768
Change-Id: I1e946f82e569fa6afc5067552c3f850ffffbf698
Alex Ray [Wed, 11 Sep 2013 23:20:07 +0000 (16:20 -0700)]
consumer_ir: add array length to get carrier freq
Change-Id: Iefb424db6f16ffefa40da56c765c9b7a24bea397
Kenny Root [Wed, 11 Sep 2013 21:56:06 +0000 (14:56 -0700)]
am
1d640f05: Merge "Use canonical UniquePtr.h header"
* commit '
1d640f05dcedfcaae63eeb90f3d89b16e95d0208':
Use canonical UniquePtr.h header
Kenny Root [Wed, 11 Sep 2013 21:52:15 +0000 (21:52 +0000)]
Merge "Use canonical UniquePtr.h header"
Kenny Root [Wed, 11 Sep 2013 21:51:09 +0000 (14:51 -0700)]
Use canonical UniquePtr.h header
Change-Id: I0487bd53fc946e1a488d7109eebd402d1ecc5a0a
Alex Ray [Wed, 11 Sep 2013 20:49:29 +0000 (13:49 -0700)]
am
c900b423: Merge "consumerir: make transmit array constant" into klp-dev
* commit '
c900b4230c5f33abc1b7bc590c4ffe21ec8a59d0':
consumerir: make transmit array constant
Alex Ray [Wed, 11 Sep 2013 20:45:02 +0000 (20:45 +0000)]
Merge "consumerir: make transmit array constant" into klp-dev
Alex Ray [Wed, 11 Sep 2013 20:36:58 +0000 (13:36 -0700)]
consumerir: make transmit array constant
Change-Id: I0409970d7bd8efe69a69ec038eea4ee3ff9cbfe0
Glenn Kasten [Wed, 11 Sep 2013 19:33:30 +0000 (12:33 -0700)]
am
22b42bc5: Merge "Clarify return values of get_presentation_position" into klp-dev
* commit '
22b42bc528c1a38176572c128323e945ea4a7d0a':
Clarify return values of get_presentation_position
Glenn Kasten [Wed, 11 Sep 2013 19:31:26 +0000 (19:31 +0000)]
Merge "Clarify return values of get_presentation_position" into klp-dev
Alex Ray [Tue, 10 Sep 2013 19:54:16 +0000 (12:54 -0700)]
am
09875a2e: modules: add demo consumer IR HAL
* commit '
09875a2eabe6bc6582b40ab8f1cc9eac9c3901d5':
modules: add demo consumer IR HAL
Alex Ray [Tue, 10 Sep 2013 19:54:16 +0000 (12:54 -0700)]
am
fe46e6a9: libhardware: add Consumer IR HAL API
* commit '
fe46e6a90675fc637a1482e8dfeb27e374b7600d':
libhardware: add Consumer IR HAL API
Kenny Root [Tue, 10 Sep 2013 18:18:11 +0000 (11:18 -0700)]
am
6a09617e: Merge "keymaster: use new version fields in hw_module"
* commit '
6a09617eaa2e47e768b87c341459bf80e008a359':
keymaster: use new version fields in hw_module
Kenny Root [Tue, 10 Sep 2013 18:14:58 +0000 (18:14 +0000)]
Merge "keymaster: use new version fields in hw_module"
Kenny Root [Thu, 5 Sep 2013 05:17:56 +0000 (22:17 -0700)]
keymaster: use new version fields in hw_module
The original version of this HAL used a field in keymaster_module to
represent the module's version number, but a later revision of the HAL
interface added a distinguisher between HAL module and device versions.
This is needed to support upgrade code in keystore.
(cherry picked from commit
c124b23f94a0a88e872253720c0e27594a9a9938)
Bug:
10600582
Change-Id: Ia2b0cbeca5c507600228c39ec7a8402f819f8804
Glenn Kasten [Tue, 10 Sep 2013 16:23:07 +0000 (09:23 -0700)]
Clarify return values of get_presentation_position
Change-Id: I495d7abd7e366849308c66bcaee99554dcd244aa
Alex Ray [Thu, 5 Sep 2013 06:32:55 +0000 (23:32 -0700)]
modules: add demo consumer IR HAL
Change-Id: Iaae40c06af0dc008429d5dee4f45dc0b156957a1
Alex Ray [Thu, 5 Sep 2013 06:32:14 +0000 (23:32 -0700)]
libhardware: add Consumer IR HAL API
Change-Id: I68db7911784aa802b378a5e1dad62397da16b03b
Colin Cross [Fri, 6 Sep 2013 00:45:07 +0000 (17:45 -0700)]
Initial interface for MemoryTrackerHAL
Bug:
10294768
Change-Id: I65cb28c8f77f3dafe5b47b24479c647fa72fc65f
Zhijun He [Mon, 9 Sep 2013 18:31:28 +0000 (11:31 -0700)]
am
eb485256: Merge "Camera2 Tests: Fix stream id types" into klp-dev
* commit '
eb485256e99e97653773024951568aadcc60f6a4':
Camera2 Tests: Fix stream id types
Zhijun He [Mon, 9 Sep 2013 18:28:12 +0000 (18:28 +0000)]
Merge "Camera2 Tests: Fix stream id types" into klp-dev
Alex Ray [Mon, 9 Sep 2013 17:34:33 +0000 (10:34 -0700)]
am
51dbad3b: Merge "hardware: camera_common: add module vendor tag ops" into klp-dev
* commit '
51dbad3bfa313a4ba9219e3d9c4b3c1b2a15d52f':
hardware: camera_common: add module vendor tag ops
Alex Ray [Mon, 9 Sep 2013 17:29:13 +0000 (17:29 +0000)]
Merge "hardware: camera_common: add module vendor tag ops" into klp-dev
Alex Ray [Thu, 13 Jun 2013 19:40:52 +0000 (12:40 -0700)]
hardware: camera_common: add module vendor tag ops
This updates the camera module API to have vendor-specific tag support.
Vendor-specific metadata tags could be contained in static camera
characteristics, so we need a method of accessing vendor tag information
from the module level (and not just with a device open).
Bug:
10612133
Change-Id: I28e8c769f8112ff4f745f3f1b5472e8a718f1356
Zhijun He [Fri, 6 Sep 2013 22:35:09 +0000 (15:35 -0700)]
Camera2 Tests: Fix stream id types
Bug:
10604704
Change-Id: I5edddb1011d6744225c59f44bd6df8ae4234d336
Kenny Root [Thu, 5 Sep 2013 07:30:25 +0000 (00:30 -0700)]
am
c124b23f: keymaster: use new version fields in hw_module
* commit '
c124b23f94a0a88e872253720c0e27594a9a9938':
keymaster: use new version fields in hw_module
Kenny Root [Thu, 5 Sep 2013 05:17:56 +0000 (22:17 -0700)]
keymaster: use new version fields in hw_module
The original version of this HAL used a field in keymaster_module to
represent the module's version number, but a later revision of the HAL
interface added a distinguisher between HAL module and device versions.
This is needed to support upgrade code in keystore.
Bug:
10600582
Change-Id: Ied34cf382e2b7725e648faada00df2dee993e6c5
Kenny Root [Tue, 3 Sep 2013 17:32:05 +0000 (10:32 -0700)]
am
2541a0a8: Add support for DSA and ECDSA key types
* commit '
2541a0a8f7a2c86658d435efb49843a88b4d97e0':
Add support for DSA and ECDSA key types
Kenny Root [Mon, 19 Aug 2013 16:51:35 +0000 (09:51 -0700)]
Add support for DSA and ECDSA key types
(cherry picked from commit
6e1683f5d508a4c1ff761a9a3508619ac5ac6ed7)
Bug:
10600582
Change-Id: I8e5b66baa70b37031198260853bb5355df75e23d
Kenny Root [Tue, 3 Sep 2013 07:14:20 +0000 (00:14 -0700)]
am
bd5015e0: Merge "Add support for DSA and ECDSA key types"
* commit '
bd5015e0f3b79d8b8e7f9b1926bbf76985ac8c61':
Add support for DSA and ECDSA key types
Kenny Root [Tue, 3 Sep 2013 07:11:08 +0000 (07:11 +0000)]
Merge "Add support for DSA and ECDSA key types"
Kenny Root [Mon, 19 Aug 2013 16:51:35 +0000 (09:51 -0700)]
Add support for DSA and ECDSA key types
Change-Id: I4b7d11c0915c716a0f1be65f5933f33a36e0fb4b
Glenn Kasten [Fri, 30 Aug 2013 00:02:56 +0000 (00:02 +0000)]
Merge "get_presentation_position" into klp-dev
Glenn Kasten [Thu, 22 Aug 2013 23:27:22 +0000 (16:27 -0700)]
get_presentation_position
Change-Id: Iedc4df9018321d7273eaa862e913ad6d9a844618
jpadmana [Tue, 25 Jun 2013 09:18:49 +0000 (14:48 +0530)]
Addition of EFFECT_CMD_OFFLOAD for effects offload
Added EFFECT_CMD_OFFLOAD command to audio effect control
interface. It is used by the framework to indicate if
the playback thread the effect is attached to is offloaded
of not.
Added effect flag EFFECT_FLAG_OFFLOAD_SUPPORTED indicating if
the effect implementation supports offloading to a DSP.
Change-Id: I26553576657d3aa9cd0cdcd5785c813b02f48136
Signed-off-by: jpadmana <jayashree.r.padmanaban@intel.com>
Signed-off-by: Eric Laurent <elaurent@google.com>
Glenn Kasten [Thu, 22 Aug 2013 22:26:35 +0000 (22:26 +0000)]
Merge "Fix file permissions" into klp-dev
destradaa [Thu, 22 Aug 2013 19:37:11 +0000 (19:37 +0000)]
Merge "Fix typo in FlpHal" into klp-dev
Eric Laurent [Thu, 22 Aug 2013 16:55:13 +0000 (09:55 -0700)]
remote submix: fix test on sampling valid rates
Change-Id: I4e9e378940bb56202a6e6882f561b3293ad7225d
destradaa [Wed, 21 Aug 2013 19:41:19 +0000 (12:41 -0700)]
Fix typo in FlpHal
Change-Id: I0a0598c4755052e071d793fbacf0aa25dfca6e5c
Glenn Kasten [Tue, 20 Aug 2013 19:48:44 +0000 (12:48 -0700)]
Fix file permissions
Change-Id: Iffc2941d98ee16796cf3d44dec1cfa376d9362bb
Mathias Agopian [Mon, 19 Aug 2013 22:59:16 +0000 (22:59 +0000)]
Merge "Define a range for device specific sensors" into klp-dev
Mathias Agopian [Mon, 19 Aug 2013 21:34:47 +0000 (14:34 -0700)]
Define a range for device specific sensors
Bug:
9551417
Change-Id: I5412d9c063743a0e99e8839a0758337c72a8725e
Zhijun He [Mon, 19 Aug 2013 21:03:22 +0000 (21:03 +0000)]
Merge "Camera2 Tests: Add multiple stream tests" into klp-dev
Zhijun He [Wed, 14 Aug 2013 00:36:17 +0000 (17:36 -0700)]
Camera2 Tests: Add multiple stream tests
Add a test to test multiple stream configuration: one preview stream, one small
size YUV burst capture stream, and one large size YUV burst capture stream.
Also cleanup the code.
Bug
10325342
Change-Id: I676484cc0034055caa8f2a8788100ed34b4cefbb
Matthew Xie [Sun, 18 Aug 2013 19:46:01 +0000 (19:46 +0000)]
Merge "Add support for AbsoluteVolume" into klp-dev
Satya Calloji [Thu, 1 Aug 2013 10:11:11 +0000 (03:11 -0700)]
Add support for AbsoluteVolume
Add support for AbsoluteVolume in HAL
bug
9595622
Change-Id: Iaf08b81b61aa07ebaa83f4bd6cc9e82171947aa1
Conflicts:
include/hardware/bt_rc.h
Jesse Hall [Fri, 16 Aug 2013 18:13:36 +0000 (11:13 -0700)]
Add HWC_DISPLAY_VIRTUAL and adjust display count constants
Both surfaceflinger and HWC implementations have been defining these
themselves, making future changes more difficult. Better to define
them centrally, where they can be updated easily.
Change-Id: I793158b858c84b2470b05f9ea77cc5a0c7e247f1
John Du [Wed, 24 Jul 2013 00:15:34 +0000 (17:15 -0700)]
Add support for ff/rew
Change-Id: I95d17aa4f54d58596085f8d67e63e277b280a242
(cherry picked from commit
a068b57857a6f9f2db335dbb18f1be37e85937c6)
Andre Eisenbach [Wed, 7 Aug 2013 02:54:25 +0000 (19:54 -0700)]
LE: Add peripheral role support (3/4)
Initial stack support for the LE peripheral role.
Change-Id: Ie036432c90c405a331e2fceaf88bf97a46182176
Andre Eisenbach [Tue, 9 Jul 2013 07:02:48 +0000 (00:02 -0700)]
LE: Add instance ID to descriptors (3/4)
If a remote devices offers multiple descriptors with the same UUID, the
instance ID is used to differentiate between them.
Change-Id: Ia5ab989f222a5cf1b7cb66966ad4f91f2b660708
Zhijun He [Fri, 9 Aug 2013 02:43:24 +0000 (19:43 -0700)]
Camera2 tests: Fix a typo of a test check
Change-Id: Ib47eba8d01e93d0c3ce2b1e8bc2ff638529e32f9
Mathias Agopian [Wed, 7 Aug 2013 03:33:38 +0000 (20:33 -0700)]
minor changes to sensor HAL interface
Change-Id: Idc415fd0a92482f4f4cd051b458a28d97f251f35
Mathias Agopian [Tue, 6 Aug 2013 23:29:17 +0000 (23:29 +0000)]
Merge "improvements to the batch mode APIs"
Mathias Agopian [Tue, 6 Aug 2013 21:22:12 +0000 (14:22 -0700)]
Fix build, 2nd attempt
Change-Id: Iaa86a6888a5ccf784b13f4c3b2d8dc4813612155
Mathias Agopian [Tue, 6 Aug 2013 21:17:59 +0000 (14:17 -0700)]
Fix build.
Change-Id: Ibf73106f8be63cf433fafe9510c8477f74b7ac41
Mathias Agopian [Thu, 25 Jul 2013 04:07:40 +0000 (21:07 -0700)]
improvements to the batch mode APIs
- also added a flush() method to drain the FIFO before
the batch timeout has expired
Change-Id: I73cc450fae0a6acf73d8b5d73bcd7a225bfbfe35
Eino-Ville Talvala [Tue, 30 Jul 2013 21:58:31 +0000 (14:58 -0700)]
Camera: Add new 3.1 device version
- Add new definition to camera_common
- Update comment in camera3.h
Change-Id: I9d8c594cfdaff40c543e8f9017091b0c06bbf022
Eino-Ville Talvala [Tue, 30 Jul 2013 17:57:55 +0000 (17:57 +0000)]
Merge "Camera2 tests: Update paths to camera service"
Eino-Ville Talvala [Fri, 26 Jul 2013 00:09:14 +0000 (17:09 -0700)]
Camera2 tests: Update paths to camera service
Change-Id: Ic50ea977194073e3768c22a5f21eb15f430fa2f5
Alex Ray [Wed, 17 Jul 2013 21:23:04 +0000 (14:23 -0700)]
modules: camera: Separate locking for static characteristics
Static camera characteristics can be queried on any device at any time.
Separate the locking for it from the rest of the device to eliminate any
contention between operations on the device and static characteristic
initialization.
Change-Id: I8076378699f274e70c6318e537df4758972de9db
Mathias Agopian [Fri, 26 Jul 2013 23:23:33 +0000 (16:23 -0700)]
get rid of HAL pixelformats 5551 and 4444
Change-Id: I196ee30ed57707ed4cc46fb3a9c5c07c5bac6fff
Alex Ray [Fri, 26 Jul 2013 20:47:51 +0000 (20:47 +0000)]
Merge "camera3: Add flush"
Alex Ray [Fri, 26 Jul 2013 20:41:59 +0000 (20:41 +0000)]
Merge "camera3: Pass consumer information in configure_streams"
Zhihai Xu [Fri, 26 Jul 2013 18:28:49 +0000 (18:28 +0000)]
Merge "Add debug menu to enable btsnoop"
Eric Laurent [Thu, 25 Jul 2013 21:15:23 +0000 (21:15 +0000)]
Merge "Code changes for offload support in hardware libhardware"
Zhijun He [Fri, 19 Jul 2013 00:59:30 +0000 (17:59 -0700)]
modules: camera: Fix build break due to metadata change
Change-Id: I085796569ea77336d32907ee2287ff7533b0c122
Zhijun He [Fri, 19 Jul 2013 00:01:57 +0000 (17:01 -0700)]
Camera2Test: fix build break due to metadata change
Change-Id: I1b81f14fe0f093a7d29d0b0facdb1886d521d256
Richard Fitzgerald [Mon, 13 May 2013 15:58:54 +0000 (16:58 +0100)]
Code changes for offload support in hardware libhardware
Change-Id: Icfe9bf4b4768bbdcb11e6c77ac26163018f9c7c8
Jason Sams [Tue, 16 Jul 2013 19:52:36 +0000 (19:52 +0000)]
Merge "Add usage bit for RenderScript."
Jason Sams [Tue, 16 Jul 2013 19:51:13 +0000 (12:51 -0700)]
Add usage bit for RenderScript.
Change-Id: I3ac3dc8e20e94ee885228febdc8eeb66278054cb
Ying Wang [Tue, 16 Jul 2013 05:18:04 +0000 (22:18 -0700)]
always pass the BufferQueue explicitely to consumers
to fix tests build.
Change-Id: Ifec605926324683ac9b12b8ed3cbfb6ac02ec18c
Mathias Agopian [Tue, 16 Jul 2013 02:18:04 +0000 (02:18 +0000)]
Merge "always pass the BufferQueue explicitely to consumers"
Mathias Agopian [Sat, 13 Jul 2013 05:06:45 +0000 (22:06 -0700)]
always pass the BufferQueue explicitely to consumers
Change-Id: Ie13b251d6bfadd533fa045ec5d3299ee8ae752af
destradaa [Sat, 13 Jul 2013 00:59:03 +0000 (00:59 +0000)]
Merge "Update FLP HAL definition for thread semantics."
Eino-Ville Talvala [Sat, 13 Jul 2013 00:10:41 +0000 (00:10 +0000)]
Merge "Camera tests: Add variable burst test"
destradaa [Fri, 12 Jul 2013 23:18:12 +0000 (16:18 -0700)]
Update FLP HAL definition for thread semantics.
Change-Id: I3dd1f5c72f0fa62a131b7ce166f3df631bb44394
Eino-Ville Talvala [Tue, 2 Jul 2013 01:47:09 +0000 (18:47 -0700)]
Camera tests: Add variable burst test
By default, this test runs through a range of application-set
exposure, frame duration, and sensitivity values, and verifies
that the duration of capture, and in some cases the brightness,
match what's expected.
Optionally, it can use environment variables to specify the
burst parameters, and to enable dumping the captured YUV images
to flash for later debugging.
Change-Id: I647d360344ef3684e99c86c369e96ac82e62fc96
Etienne Le Grand [Fri, 12 Jul 2013 16:17:52 +0000 (16:17 +0000)]
Merge "Clarify some comments in the sensor HAL"
Mathias Agopian [Wed, 10 Jul 2013 23:10:47 +0000 (23:10 +0000)]
Merge "bump HWC version to 1.3, add support for float crop rectangle"
Mathias Agopian [Wed, 10 Jul 2013 02:55:41 +0000 (19:55 -0700)]
bump HWC version to 1.3, add support for float crop rectangle
Change-Id: I8601ecc9f39052000b872805be1637ee73b0d3e1
Etienne Le Grand [Wed, 10 Jul 2013 21:08:40 +0000 (14:08 -0700)]
Clarify some comments in the sensor HAL
Step count can reset when android restarts
When calling activate() without calling setDelay() before, use a default rate
Uncalibrated magnetometer should not be low pass filtered
The accelerometer can be used for the geomagnetic rotation vector
When batching call retuns an error, it shouldn't change the state. In particular, it shouldn't change the rate.
batch(timeout=0) must always return success
Wake upon fifo full will never be specified when timeout=0
setDelay is not called when in batch mode
Change-Id: I8a437eeedbdc54e5f1f3e644a92e9f781d7add0d
Alex Ray [Tue, 9 Jul 2013 19:19:49 +0000 (12:19 -0700)]
modules: camera: simplify metadata list traversal
keep traveling pointer local to the walking loop
Change-Id: I0038007d6e7a45e519b9b2162c674132477879cc
Alex Ray [Tue, 4 Jun 2013 19:38:07 +0000 (12:38 -0700)]
modules: camera: Shutter notify message support
The shutter callback timestamp should originate from the sensor itself,
since it knows exactly when the first line of the frame started
exposing. However, as a fallback (or in the CPU-painting case) query
CLOCK_BOOTTIME instead.
Change-Id: Id57c05525e9c575d009b9deb96a69557fccac16b
Alex Ray [Tue, 9 Jul 2013 19:18:35 +0000 (19:18 +0000)]
Merge "modules: camera: make Metadata a delete-able object"
Alex Ray [Tue, 9 Jul 2013 19:18:17 +0000 (19:18 +0000)]
Merge "modules: camera: only wait on valid acquire fence"
The Android Open Source Project [Mon, 8 Jul 2013 22:52:25 +0000 (15:52 -0700)]
am
cb7f5b94: (-s ours) Reconcile with jb-mr2-zeroday-release - do not merge
* commit '
cb7f5b94a3d683f297ddf839ca4aa897e0927139':