OSDN Git Service
Junio C Hamano [Wed, 27 Jun 2007 05:23:29 +0000 (22:23 -0700)]
Merge branch 'master' of git://repo.or.cz/git/fastimport
* 'master' of git://repo.or.cz/git/fastimport:
Teach bash how to complete +refspec on git-push
Adam Roben [Tue, 26 Jun 2007 22:48:30 +0000 (15:48 -0700)]
git-send-email: Add --threaded option
The --threaded option controls whether the In-Reply-To header will be set on
any emails sent. The current behavior is to always set this header, so this
option is most useful in its negated form, --no-threaded. This behavior can
also be controlled through the 'sendemail.threaded' config setting.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Sun, 24 Jun 2007 19:13:11 +0000 (21:13 +0200)]
Don't ignore a pack-refs write failure
Without this, if the size of refs_file at that point is ever an exact
multiple of BUFSIZ, then an EIO or ENOSPC error on the final write would
not be diagnosed.
It's not worth worrying about EPIPE here.
Although theoretically possible that someone kill this process
with a manual SIGPIPE, it's not at all likely.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Sun, 24 Jun 2007 19:20:41 +0000 (21:20 +0200)]
detect close failure on just-written file handles
I audited git for potential undetected write failures.
In the cases fixed below, the diagnostics I add mimic the diagnostics
used in surrounding code, even when that means not reporting
the precise strerror(errno) cause of the error.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Frank Lichtenheld [Mon, 25 Jun 2007 14:03:55 +0000 (16:03 +0200)]
config: Add --null/-z option for null-delimted output
Use \n as delimiter between key and value and \0 as
delimiter after each key/value pair. This should be
easily parsable output.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 27 Jun 2007 01:33:24 +0000 (18:33 -0700)]
Merge branch 'maint'
* maint:
config: Change output of --get-regexp for valueless keys
config: Complete documentation of --get-regexp
cleanup merge-base test script
Fix zero-object version-2 packs
Ignore submodule commits when fetching over dumb protocols
Frank Lichtenheld [Mon, 25 Jun 2007 14:03:54 +0000 (16:03 +0200)]
config: Change output of --get-regexp for valueless keys
Print no space after the name of a key without value.
Otherwise keys without values are printed exactly the
same as keys with empty values.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Frank Lichtenheld [Mon, 25 Jun 2007 14:03:53 +0000 (16:03 +0200)]
config: Complete documentation of --get-regexp
The asciidoc documentation of the --get-regexp option was
incomplete. Add some missing pieces:
- List the option in SYNOPSIS
- Mention that key names are printed
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simon Hausmann [Mon, 25 Jun 2007 11:04:26 +0000 (13:04 +0200)]
git-new-workdir: Fix shell warning about operator == used with test.
Use = instead of == with test to test for equality.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sam Vilain [Tue, 26 Jun 2007 23:44:22 +0000 (11:44 +1200)]
cleanup merge-base test script
Add a picture, and keep the setup and the tests together.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quy Tonthat [Tue, 26 Jun 2007 15:39:07 +0000 (01:39 +1000)]
git.spec: RPM failed, looking for wrong files.
RPM build broke with "File not found" error on git-gui.1 and git-citool.1
They actually are git-gui.1.gz and git-citool.1.gz
Signed-off-by: Quy Tonthat <qtonthat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Tue, 26 Jun 2007 21:34:02 +0000 (14:34 -0700)]
Fix zero-object version-2 packs
A pack-file can get created without any objects in it (to transfer "no
data" - which can happen if you use a reference git repo, for example,
or just otherwise just end up transferring only branch head information
and already have all the objects themselves).
And while we probably should never create an index for such a pack, if we
do (and we do), the index file size sanity checking was incorrect.
This fixes it.
Reported-and-tested-by: Jocke Tjernlund <tjernlund@tjernlund.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sven Verdoolaege [Tue, 26 Jun 2007 21:19:41 +0000 (23:19 +0200)]
Ignore submodule commits when fetching over dumb protocols
Without this patch, the code would look for the submodule
commits in the superproject and (needlessly) fail when it
couldn't find them.
Signed-off-by: Sven Verdoolaege <skimo@liacs.nl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 26 Jun 2007 22:41:06 +0000 (15:41 -0700)]
Merge branch 'master' of git://git./gitk/gitk into pm/gitk
* 'master' of git://git.kernel.org/pub/scm/gitk/gitk: (21 commits)
gitk: Add a progress bar to show progress while resetting
gitk: Improve handling of whitespace and special chars in filenames
gitk: Fix bug causing nearby tags/heads to sometimes not be displayed
gitk: Limit how often we change the canvas scrolling region
gitk: Add a "reset branch to here" row context-menu operation
gitk: Get rid of the childlist variable
gitk: Speed up the reading of references
gitk: Show local uncommitted changes as a fake commit
gitk: New algorithm for drawing the graph lines
gitk: Store ids in rowrangelist and idrowranges rather than row numbers
gitk: Disable the head context menu entries for the checked-out branch
gitk: Cope with commit messages with carriage-returns and initial blank lines
gitk: Implement a simple scheduler for the compute-intensive stuff
gitk: Improve the behaviour of the initial selection
gitk: Add some more comments to the optimize_rows procedure
gitk: Don't try to list large numbers of tags or heads in the details pane
gitk: New infrastructure for working out branches & previous/next tags
[PATCH] gitk: Allow specifying tabstop as other than default 8 characters.
[PATCH] gitk: Update fontsize in patch / tree list
[PATCH] gitk: Make selection highlight color configurable
...
Conflicts:
gitk
Paul Mackerras [Tue, 26 Jun 2007 01:09:49 +0000 (11:09 +1000)]
gitk: Add a progress bar to show progress while resetting
Since git reset now gets chatty while resetting, we were getting errors
reported when a reset was done using the "reset branch to here" menu
item. With this we now read the progress messages from git reset and
update a progress bar. Because git reset outputs the progress messages
to standard error, and Tcl treats messages to standard error as error
messages, we have to invoke git reset via a shell and redirect standard
error into standard output.
This also fixes a bug in computing descendent heads when head ids
are changed via a reset.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Shawn O. Pearce [Sun, 24 Jun 2007 23:42:16 +0000 (19:42 -0400)]
Teach bash how to complete +refspec on git-push
Using `git push origin +foo` to forcefully overwrite the remote
branch named foo is a common idiom, especially since + is shorter
than the long option --force and can be specified on a per-branch
basis.
We now complete `git push origin +foo` just like we do the standard
`git push origin foo`. The leading + on a branch refspec does not
alter the completion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano [Wed, 20 Jun 2007 20:47:34 +0000 (13:47 -0700)]
git-send-email: Do not make @-less message ID
When the original $from address fails to yield a valid-looking
e-mail address, we created a bogus looking message ID, formatted
like this:
Message-Id: <
11823357623688-git-send-email->
This commit fixes it by moving call to make_message_id() to
where it matters, namely, before the $message_id is needed to be
placed in the generated e-mail header; this has an important
side effect of making it clear that $from is already available.
Also throw in Sys::Hostname::hostname() just for fun, although I
suspect that the code would never trigger due to the modified
call sequence that makes sure $from is always available. This
is based on a suggestion by Michael Hendricks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gerrit Pape [Tue, 19 Jun 2007 16:47:41 +0000 (16:47 +0000)]
git-svn: trailing slash in prefix is mandatory with --branches/-b
Make clear in the documentation that when using --branches/-b and
--prefix with 'init', the prefix must include a trailing slash.
This matches the actual behavior of git-svn, e.g.:
$ git svn init -Ttrunk -treleases -bbranches --prefix xxx \
http://svn.sacredchao.net/svn/quodlibet/
--prefix='xxx' must have a trailing slash '/'
$
This was noticed by R. Vanicat and reported through
http://bugs.debian.org/429443
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Julian Phillips [Tue, 19 Jun 2007 11:44:43 +0000 (12:44 +0100)]
new-workdir: handle rev-parse --git-dir not always giving full path
rev-parse --git-dir outputs a full path - except for the single case
of when the path would be $(pwd)/.git, in which case it outputs simply
.git. Check for this special case and handle it.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthias Lederhofer [Mon, 18 Jun 2007 21:30:36 +0000 (23:30 +0200)]
make dist: include configure script in tarball
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 24 Jun 2007 09:08:31 +0000 (02:08 -0700)]
Merge branch 'lt/follow'
* lt/follow:
Fix up "git log --follow" a bit..
Finally implement "git log --follow"
Sven Verdoolaege [Fri, 22 Jun 2007 15:49:08 +0000 (17:49 +0200)]
t9500: skip gitweb tests if perl version is too old
gitweb calls Encode::decode_utf8 with two arguments,
but old versions of perl only allow this function to be called
with one argument. Even older versions of perl do not even
have an Encode module.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 24 Jun 2007 06:54:41 +0000 (23:54 -0700)]
Merge branch 'master' of git://repo.or.cz/git/fastimport
* 'master' of git://repo.or.cz/git/fastimport: (260 commits)
Avoid src:dst syntax as default bash completion for git push
Make it possible to specify the HEAD for the internal findUpstreamBranchPoint function.
Added git-p4 branches command that shows the mapping of perforce depot paths to imported git branches.
Warn about conflicting p4 branch mappings and use the first one found.
Fix the branch mapping detection to be independent from the order of the "p4 branches" output.
git-p4 fails when cloning a p4 depo.
Fix initial multi-branch import.
Only use double quotes on Windows
Fix git-p4 rebase to detect the correct upstream branch instead of unconditionally
Moved the code from git-p4 submit to figure out the upstream branch point
git-p4 submit: Fix missing quotes around p4 commands to make them work with spaces in filenames
Mention remotes/p4/master also in the documentation.
Provide some information for single branch imports where the commits go
git-p4: check for existence of repo dir before trying to create
Write out the options tag in the log message of imports only if we actually have
Fix support for explicit disabling of syncing with the origin
Fix depot-paths encoding for multi-path imports (don't split up //depot/path/foo)
Fix project name guessing
Fix updating/creating remotes/p4/* heads from origin/p4/*
Fixed the check to make sure to exclude the HEAD symbolic refs when updating
...
Paul Mackerras [Sat, 23 Jun 2007 10:28:15 +0000 (20:28 +1000)]
gitk: Improve handling of whitespace and special chars in filenames
The main thing here is better parsing of the diff --git lines in the
output of git diff-tree -p. We now cope with filenames in quotes with
special chars escaped. If the filenames contain spaces they aren't
quoted, however, which can create difficulties in parsing. We get
around the difficulties by detecting the case when the filename hasn't
changed (chop the part after "diff --git " in two and see if the halves
match apart from a/ in one and b/ in the other), and if it hasn't
changed, we just use one half. If the filename has changed we wait
for the "rename from" and "rename to" lines, which give the old and
new filenames unambiguously.
This also improves the parsing of the output of git diff-tree.
Instead of using lindex to extract the filename, we take the part from
the first tab on, and if it starts with a quote, we use [lindex $str 0]
to remove the quotes and convert the escapes.
This also gets rid of some unused tagging of the diff text, uses
[string compare] instead of [regexp] in some places, and fixes the
regexp for detecting the @@ hunk-separator lines (the regexp wasn't
accepting a single number, as in "-0,0 +1" for example).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Mon, 18 Jun 2007 12:39:21 +0000 (22:39 +1000)]
gitk: Fix bug causing nearby tags/heads to sometimes not be displayed
When we compute descendent heads and descendent/ancestor tags, we
cache the results. We need to be careful to invalidate the cache
when we add stuff to the graph. Also make sure that when we cache
descendent heads for a node we only cache the heads that are actually
descendents of that node.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Tue, 31 Oct 2006 04:00:53 +0000 (15:00 +1100)]
gitk: Limit how often we change the canvas scrolling region
For some unknown reason, changing the scrolling region on the canvases
provokes multiple milliseconds worth of computation in the X server,
and this can end up slowing gitk down significantly. This works around
the problem by limiting the rate at which we update the scrolling region
after the first 100 rows to at most 2 per second.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Thu, 19 Oct 2006 00:09:06 +0000 (10:09 +1000)]
gitk: Add a "reset branch to here" row context-menu operation
This adds an entry to the menu that comes up when the user does a
right-click on a row. The new entry allows the user to reset the
currently checked-out head to the commit for the row that they did
the right-click on. The user has to select what type of reset to
do, and confirm the reset, via a dialog box that pops up.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sun, 17 Jun 2007 23:48:23 +0000 (09:48 +1000)]
gitk: Get rid of the childlist variable
The information in childlist is a duplicate of what's in the children
array, and it wasn't being accessed often enough to be really worth
keeping the list around as well.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Mon, 11 Sep 2006 00:36:53 +0000 (10:36 +1000)]
gitk: Speed up the reading of references
We were doing two execs for each tag - one to map the tag ID to a
commit ID and one to read the contents of the tag for later display.
This speeds up the process by not reading the contents of the tag
(instead it is read later if needed), and by using the -d flag to
git show-ref, which gives us refs/tags/foo^{} lines which give us
the commit ID. Also this uses string operations instead of regexps.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Thu, 7 Sep 2006 00:21:39 +0000 (10:21 +1000)]
gitk: Show local uncommitted changes as a fake commit
If there are local changes in the repository, i.e., git-diff-index HEAD
produces some output, then this optionally displays an extra row in
the graph as a child of the HEAD commit (but with a red circle to
indicate that it's not a real commit). There is a checkbox in the
preferences window to control whether gitk does this or not.
Clicking on the extra row shows the diffs between the working directory
and the HEAD (using git diff-index -p). The right-click menu on the
extra row allows the user to generate a patch containing the local diffs,
or to display the diffs between the working directory and any commit.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sun, 15 Oct 2006 08:03:46 +0000 (18:03 +1000)]
gitk: New algorithm for drawing the graph lines
This only draws as much of the graph lines as is visible. This can
happen by adding coordinates on to an existing graph line or by
creating a new line. This means that we only need to have laid out
and optimized as much of the graph as is actually visible in order to
draw it, including the lines (previously we didn't draw a graph
line until we had laid out and optimized to the end of a segment of
the line, i.e. down to a down-arrow or to the row where the line's
commit is displayed). This also lets us get rid of the linesegends
list, and gives us an easy workaround for the X server bug that
causes long lines to be misdrawn. This also gets rid of the use
of rowoffsets in drawlineseg et al.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sat, 14 Oct 2006 09:21:02 +0000 (19:21 +1000)]
gitk: Store ids in rowrangelist and idrowranges rather than row numbers
This removes the need for insertrow to go through rowrangelist and
idrowranges and adjust a lot of entries. The first entry for a given
id is now the row number of the first child, not that row number + 1,
and rowranges compensates for that so its callers didn't have to
change. This adds a ranges argument to drawlineseg so that we can
avoid calling rowranges a second time inside drawlineseg (all its
callers already called rowranges).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sun, 17 Jun 2007 07:08:35 +0000 (17:08 +1000)]
gitk: Disable the head context menu entries for the checked-out branch
Neither the "check out this branch" nor the "remove this branch"
menu item can be used on the currently-checked out branch, so disable
them.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Wed, 27 Sep 2006 00:56:02 +0000 (10:56 +1000)]
gitk: Cope with commit messages with carriage-returns and initial blank lines
In some repositories imported from other systems we can get carriage
return characters in the commit message, which leads to a multi-line
headline being displayed in the summary window, which looks bad.
Also some commit messages start with one or more blank lines, which
leads to an empty headline. This fixes these problems.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sun, 17 Jun 2007 04:45:00 +0000 (14:45 +1000)]
gitk: Implement a simple scheduler for the compute-intensive stuff
This allows us to do compute-intensive processing, such as laying out
the graph, relatively efficiently while also having the GUI be
reasonably responsive. The problem previously was that file events
were serviced before X events, so reading from another process which
supplies data quickly (hi git rev-list :) could mean that X events
didn't get processed for a long time.
With this, gitk finishes laying out the graph slightly sooner and
still responds to the GUI while doing so.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sat, 16 Jun 2007 11:51:08 +0000 (21:51 +1000)]
gitk: Improve the behaviour of the initial selection
It used to be that if you clicked on a line while gitk was still drawing
stuff, it would immediately re-select the first line of the display.
This fixes that.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Thu, 14 Sep 2006 23:45:23 +0000 (09:45 +1000)]
gitk: Add some more comments to the optimize_rows procedure
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sat, 16 Jun 2007 11:21:57 +0000 (21:21 +1000)]
gitk: Don't try to list large numbers of tags or heads in the details pane
With some large repositories, a commit can end up on thousands of
branches, which results in an extremely long "Branches:" line in the
details window, and that results in the window being extremely slow
to scroll.
This fixes it by just showing "many (N)" after "Branches:", "Follows:"
or "Precedes:", where N is the number of heads or tags. The limit
is currently set at 20 but could be made configurable (and the "many"
could be a link to pop up a window listing them all in case anyone
really wants to know).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sat, 16 Jun 2007 10:29:25 +0000 (20:29 +1000)]
gitk: New infrastructure for working out branches & previous/next tags
Instead of working out descendent heads and descendent & ancestor
branches in a two-pass algorithm, this reads and stores a simplified
version of the graph topology, and works out descendent/ancestor
tags and descendent heads on demand (with a bit of caching).
The advantages of this are, first, that we now don't have to use
--topo-order on the git rev-list process. Secondly, we don't have
to re-read the whole graph when tags or heads change or even when
the graph changes. Since we can cope with parents coming before
children, we can update the graph by running a git rev-list with
arguments that just give us the new commits, and merge the new
commits into the simplified graph.
The graph is simplified in the sense that commits with exactly one
parent and one child (which is >90% of them in most cases) are grouped
together into arcs joining nodes or 'branch/merge points', which are
the commits that don't have exactly 1 parent and 1 child. This reduces
the size of the graph substantially and decreases the time to traverse
it correspondingly.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Linus Torvalds [Thu, 21 Jun 2007 17:22:59 +0000 (10:22 -0700)]
Fix up "git log --follow" a bit..
This fixes "git log --follow" to hopefully not leak memory any more, and
also cleans it up a bit to look more like some of the other functions that
use "diff_queued_diff" (by *not* using it directly as a global in the
code, but by instead just taking a pointer to the diff queue and using
that).
As to "diff_queued_diff", I think it would be better off not as a global
at all, but as being just an entry in the "struct diff_options" structure,
but that's a separate issue, and there may be some subtle reason for why
it's currently a global.
Anyway, no real changes. Instead of having a magical first entry in the
diff-queue, we now end up just keeping the diff-queue clean, and keeping
our "preferred" file pairing in an internal "choice" variable. That makes
it easy to switch the choice around when we find a better one.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Tue, 19 Jun 2007 21:22:46 +0000 (14:22 -0700)]
Finally implement "git log --follow"
Ok, I've really held off doing this too damn long, because I'm lazy, and I
was always hoping that somebody else would do it.
But no, people keep asking for it, but nobody actually did anything, so I
decided I might as well bite the bullet, and instead of telling people
they could add a "--follow" flag to "git log" to do what they want to do,
I decided that it looks like I just have to do it for them..
The code wasn't actually that complicated, in that the diffstat for this
patch literally says "70 insertions(+), 1 deletions(-)", but I will have
to admit that in order to get to this fairly simple patch, you did have to
know and understand the internal git diff generation machinery pretty
well, and had to really be able to follow how commit generation interacts
with generating patches and generating the log.
So I suspect that while I was right that it wasn't that hard, I might have
been expecting too much of random people - this patch does seem to be
firmly in the core "Linus or Junio" territory.
To make a long story short: I'm sorry for it taking so long until I just
did it.
I'm not going to guarantee that this works for everybody, but you really
can just look at the patch, and after the appropriate appreciative noises
("Ooh, aah") over how clever I am, you can then just notice that the code
itself isn't really that complicated.
All the real new code is in the new "try_to_follow_renames()" function. It
really isn't rocket science: we notice that the pathname we were looking
at went away, so we start a full tree diff and try to see if we can
instead make that pathname be a rename or a copy from some other previous
pathname. And if we can, we just continue, except we show *that*
particular diff, and ever after we use the _previous_ pathname.
One thing to look out for: the "rename detection" is considered to be a
singular event in the _linear_ "git log" output! That's what people want
to do, but I just wanted to point out that this patch is *not* carrying
around a "commit,pathname" kind of pair and it's *not* going to be able to
notice the file coming from multiple *different* files in earlier history.
IOW, if you use "git log --follow", then you get the stupid CVS/SVN kind
of "files have single identities" kind of semantics, and git log will just
pick the identity based on the normal move/copy heuristics _as_if_ the
history could be linearized.
Put another way: I think the model is broken, but given the broken model,
I think this patch does just about as well as you can do. If you have
merges with the same "file" having different filenames over the two
branches, git will just end up picking _one_ of the pathnames at the point
where the newer one goes away. It never looks at multiple pathnames in
parallel.
And if you understood all that, you probably didn't need it explained, and
if you didn't understand the above blathering, it doesn't really mtter to
you. What matters to you is that you can now do
git log -p --follow builtin-rev-list.c
and it will find the point where the old "rev-list.c" got renamed to
"builtin-rev-list.c" and show it as such.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 23 Jun 2007 06:33:08 +0000 (23:33 -0700)]
Merge branch 'jc/oneline'
* jc/oneline:
pp_header(): work around possible memory corruption
Junio C Hamano [Sat, 23 Jun 2007 06:32:19 +0000 (23:32 -0700)]
Merge branch 'ei/oneline+add-empty'
* ei/oneline+add-empty:
Fix ALLOC_GROW calls with obsolete semantics
Fix ALLOC_GROW off-by-one
builtin-add: simplify (and increase accuracy of) exclude handling
dir_struct: add collect_ignored option
Extend --pretty=oneline to cover the first paragraph,
Lift 16kB limit of log message output
Johannes Schindelin [Thu, 21 Jun 2007 17:05:30 +0000 (18:05 +0100)]
filter-branch: add example to move everything into a subdirectory
This is based on Jeff King's example in
20070621130137.GB4487@coredump.intra.peff.net
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 23 Jun 2007 06:20:40 +0000 (23:20 -0700)]
Merge branch 'js/filter'
* js/filter:
filter-branch: subdirectory filter needs --full-history
filter-branch: Simplify parent computation.
Teach filter-branch about subdirectory filtering
filter-branch: also don't fail in map() if a commit cannot be mapped
filter-branch: Use rev-list arguments to specify revision ranges.
filter-branch: fix behaviour of '-k'
filter-branch: use $(($i+1)) instead of $((i+1))
chmod +x git-filter-branch.sh
filter-branch: prevent filters from reading from stdin
t7003: make test repeatable
Add git-filter-branch
Junio C Hamano [Sat, 23 Jun 2007 06:19:43 +0000 (23:19 -0700)]
Two trivial -Wcast-qual fixes
Luiz Fernando N. Capitulino noticed the one in tree-walk.h where
we cast away constness while computing the legnth of a tree
entry.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Thu, 21 Jun 2007 11:52:11 +0000 (12:52 +0100)]
diffcore-rename: favour identical basenames
When there are several candidates for a rename source, and one of them
has an identical basename to the rename target, take that one.
Noticed by Govind Salinas, posted by Shawn O. Pearce, partial patch
by Linus Torvalds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Thu, 21 Jun 2007 04:51:00 +0000 (00:51 -0400)]
Document git-gui, git-citool as mainporcelain manual pages
Jakub Narebski pointed out that the git-gui blame viewer is not a
widely known feature, but is incredibly useful. Part of the issue
is advertising. Up until now we haven't even referenced git-gui from
within the core Git manual pages, mostly because I just wasn't sure
how I wanted to supply git-gui documentation to end-users, or how
that documentation should integrate with the core Git documentation.
Based upon Jakub's comment that many users may not even know that
the gui is available in a stock Git distribution I'm offering up
two basic manual pages: git-citool and git-gui. These should offer
enough of a starting point for users to identify that the gui exists,
and how to start it. Future releases of git-gui may contain their
own documentation system available from within a running git-gui.
But not today.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dave O'Neill [Thu, 21 Jun 2007 21:48:56 +0000 (17:48 -0400)]
Generate tags with correct timestamp (git-svnimport)
Now uses git-tag instead of manually constructing the tag. This gives us a
correct timestamp, removes some crufty code, and makes it work the same as
git-cvsimport.
The generated tags are now lightweight tags instead of tag objects, which may
or may not be the behaviour we want.
Also, remove two unused variables from git-cvsimport.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Fri, 22 Jun 2007 23:08:36 +0000 (19:08 -0400)]
Import branch 'git-p4' of git://repo.or.cz/fast-export
Simon has asked that the git.git project include the git-p4 project
as at least a contrib/fast-import within git.git. I think it makes
a lot of sense, as git-p4 nicely complements the only other in-tree
fast-import user: import-tars.perl.
git-p4 is offered under the MIT license by its authors.
Shawn O. Pearce [Fri, 22 Jun 2007 22:44:04 +0000 (18:44 -0400)]
Avoid src:dst syntax as default bash completion for git push
Raimund Bauer just discovered that the default bash completion for
a local branch name in a git-push line is not the best choice when
the branch does not exist on the remote system.
In the past we have always completed the local name 'test' as
"test:test", indicating that the destination name is the same as
the local name. But this fails when "test" does not yet exist on
the remote system, as there is no "test" branch for it to match
the name against.
Fortunately git-push does the right thing when given just the
local branch, as it assumes you want to use the same name in the
destination repository. So we now offer "test" as the completion
in a git-push line, and let git-push assume that is also the remote
branch name.
We also still support the remote branch completion after the :,
but only if the user manually adds the colon before trying to get
a completion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Simon Hausmann [Thu, 21 Jun 2007 22:01:57 +0000 (00:01 +0200)]
Make it possible to specify the HEAD for the internal findUpstreamBranchPoint function.
This isn't used right now in git-p4 but I use it in an external script that loads git-p4 as module.
Signed-off-by: Simon Hausmann <shausman@trolltech.com>
Nanako Shiraishi [Sat, 16 Jun 2007 22:26:08 +0000 (15:26 -0700)]
Cloning from a repo without "current branch"
If the remote repository does not have a "current branch", git-clone
was confused and did not set up the resulting new repository
correctly. It did not reset HEAD from the default 'master', and did
not write the SHA1 to the master branch.
Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ismail Dönmez [Tue, 8 May 2007 10:49:31 +0000 (13:49 +0300)]
Change default man page path to /usr/share/man
According to FHS,
http://www.pathname.com/fhs/pub/fhs-2.3.html#USRSHAREMANMANUALPAGES
default man page path is $prefix/share/man.
Signed-off-by: Ismail Donmez <ismail@pardus.org.tr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 18 Jun 2007 08:43:34 +0000 (01:43 -0700)]
INSTALL: explain how to build documentation
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Riesen [Sat, 16 Jun 2007 23:52:50 +0000 (01:52 +0200)]
cvsserver: Actually implement --export-all
Frank Lichtenheld, Fri, Jun 15, 2007 03:01:53 +0200:
> +test_expect_failure 'req_Root failure (export-all w/o whitelist)' \
> + 'cat request-anonymous | git-cvsserver --export-all pserver >log 2>&1
> + || false'
This does not work, at least for bash in current Ubuntu:
GNU bash, version 3.2.13(1)-release
You have to put "||" on the previous line:
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simon Hausmann [Wed, 20 Jun 2007 21:10:28 +0000 (23:10 +0200)]
Added git-p4 branches command that shows the mapping of perforce depot paths to imported git branches.
Signed-off-by: Simon Hausmann <simon@lst.de>
Simon Hausmann [Sun, 17 Jun 2007 13:10:24 +0000 (15:10 +0200)]
Warn about conflicting p4 branch mappings and use the first one found.
Signed-off-by: Simon Hausmann <simon@lst.de>
Simon Hausmann [Sun, 17 Jun 2007 09:25:34 +0000 (11:25 +0200)]
Fix the branch mapping detection to be independent from the order of the "p4 branches" output.
Collect "unknown" source branches separately and register them at the end.
Also added a minor speed up to splitFilesIntoBranches by breaking out of the loop through all branches when it's safe.
Signed-off-by: Simon Hausmann <simon@lst.de>
Jeff King [Sat, 16 Jun 2007 22:43:40 +0000 (18:43 -0400)]
Fix ALLOC_GROW calls with obsolete semantics
ALLOC_GROW now expects the 'nr' argument to be "how much you
want" and not "how much you have". This fixes all cases
where we weren't previously adding anything to the 'nr'.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 17 Jun 2007 00:58:28 +0000 (17:58 -0700)]
Merge branch 'jk/add-empty' into ei/oneline+add-empty
* jk/add-empty:
builtin-add: simplify (and increase accuracy of) exclude handling
dir_struct: add collect_ignored option
Johannes Schindelin [Fri, 15 Jun 2007 12:19:07 +0000 (13:19 +0100)]
pp_header(): work around possible memory corruption
add_user_info() possibly adds way more than just the commit header line.
In fact, it sometimes needs so much more space that there is a buffer
overrun, leading to an ugly crash. For example, the date is printed in its
own line, and usually takes up more space than the equivalent Unix epoch.
So, for good measure, add 80 characters (a full line) to the allocated
space, in addition to the header line length.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 16 Jun 2007 22:37:39 +0000 (18:37 -0400)]
Fix ALLOC_GROW off-by-one
The ALLOC_GROW macro will never let us fill the array completely,
instead allocating an extra chunk if that would be the case. This is
because the 'nr' argument was originally treated as "how much we do have
now" instead of "how much do we want". The latter makes much more
sense because you can grow by more than one item.
This off-by-one never resulted in an error because it meant we were
overly conservative about when to allocate. Any callers which passed
"how much we have now" need to be updated, or they will fail to allocate
enough.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sat, 16 Jun 2007 19:03:38 +0000 (21:03 +0200)]
Document git log --full-diff
Based on description of commit
477f2b41310c4b1040a9e7f72720b9c39d82caf9
"git log --full-diff" adding this option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sat, 16 Jun 2007 19:03:39 +0000 (21:03 +0200)]
Document git log --abbrev-commit, as a kind of pretty option
Documentation taken from paraphrased description of "--abbrev[=<n>]"
diff option, and from description of commit
5c51c985 introducing
this option.
Note that to change number of digits one must use "--abbrev=<n>",
which affects [also] diff output.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sat, 16 Jun 2007 19:03:37 +0000 (21:03 +0200)]
Use tabs for indenting definition list for options in git-log.txt
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sat, 16 Jun 2007 19:03:42 +0000 (21:03 +0200)]
Document git rev-list --timestamp
Note that git log does not understand this option yet:
$ git log --timestamp
fatal: unrecognized argument: --timestamp
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sat, 16 Jun 2007 19:03:46 +0000 (21:03 +0200)]
Document git reflog --stale-fix
Document --stale-fix, used in "git reflog expire --stale-fix --all"
to remove invalid reflog entries, to fix situation after running
non reflog-aware git-prune from an older git in the presence of
reflogs (see RelNotes-1.5.0.txt).
Based on description of commit
1389d9ddaa68a4cbf5018d88f971b9bbb7aaa3c9
"reflog expire --fix-stale"
which introduced this option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sat, 16 Jun 2007 19:03:44 +0000 (21:03 +0200)]
Document git rev-parse --is-inside-git-dir
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sat, 16 Jun 2007 19:03:45 +0000 (21:03 +0200)]
Document git read-tree --trivial
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sat, 16 Jun 2007 19:03:43 +0000 (21:03 +0200)]
Document git rev-list --full-history
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Benjamin Sergeant [Fri, 8 Jun 2007 18:13:55 +0000 (11:13 -0700)]
git-p4 fails when cloning a p4 depo.
A perforce command with all the files in the repo is generated to get
all the file content.
Here is a patch to break it into multiple successive perforce command
who uses 4K of parameter max, and collect the output for later.
It works, but not for big depos, because the whole perforce depo
content is stored in memory in P4Sync.run(), and it looks like mine is
bigger than 2 Gigs, so I had to kill the process.
[Simon: I added the bit about using SC_ARG_MAX, as suggested by Han-Wen]
Signed-off-by: Benjamin Sergeant <bsergean@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
Alex Riesen [Tue, 12 Jun 2007 20:52:10 +0000 (22:52 +0200)]
Do not use h_errno after connect(2): the function does not set it
Randal L. Schwartz noticed compilation problems on SunOS, which made
me look at the code again. The thing is, h_errno is not used by
connect(2), it is only for functions from netdb.h, like gethostbyname.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 16 Jun 2007 16:10:18 +0000 (09:10 -0700)]
Documentation: update "stale" links for 1.5.2.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simon Hausmann [Sat, 16 Jun 2007 11:09:21 +0000 (13:09 +0200)]
Fix initial multi-branch import.
The list of existing p4 branches in git wasn't initialized.
Signed-off-by: Simon Hausmann <shausman@trolltech.com>
Junio C Hamano [Sat, 16 Jun 2007 08:22:45 +0000 (01:22 -0700)]
Merge branch 'jc/remote'
* jc/remote:
git-push: Update description of refspecs and add examples
remote.c: "git-push frotz" should update what matches at the source.
remote.c: fix "git push" weak match disambiguation
remote.c: minor clean-up of match_explicit()
remote.c: refactor creation of new dst ref
remote.c: refactor match_explicit_refs()
Junio C Hamano [Sat, 16 Jun 2007 08:22:43 +0000 (01:22 -0700)]
Merge branch 'gp/branch'
* gp/branch:
git-branch: cleanup config file when deleting branches
Junio C Hamano [Sat, 16 Jun 2007 08:22:38 +0000 (01:22 -0700)]
Merge branch 'fl/cvsserver'
* fl/cvsserver:
cvsserver: Actually implement --export-all
cvsserver: Let --base-path and pserver get along just fine
cvsserver: Add some useful commandline options
Junio C Hamano [Sat, 16 Jun 2007 08:22:35 +0000 (01:22 -0700)]
Merge branch 'lh/submodule'
* lh/submodule:
gitmodules(5): remove leading period from synopsis
Add gitmodules(5)
git-submodule: give submodules proper names
Rename sections from "module" to "submodule" in .gitmodules
git-submodule: remember to checkout after clone
t7400: barf if git-submodule removes or replaces a file
Junio C Hamano [Sat, 16 Jun 2007 08:22:10 +0000 (01:22 -0700)]
Merge branch 'maint' to sync with GIT 1.5.2.2
Sam Vilain [Fri, 15 Jun 2007 03:43:59 +0000 (15:43 +1200)]
git-svn: avoid string eval for defining functions
You don't need to use string eval to define new functions; assigning a
code reference to the target symbol table is enough.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Daniel Barkalow [Fri, 15 Jun 2007 14:22:37 +0000 (10:22 -0400)]
Fix pushing to a pattern with no dst
Refspecs with no colons are left with no dst value, because they are
interepreted differently for fetch and push. For push, they mean to
reuse the src side. Fix this for patterns.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 16 Jun 2007 06:58:18 +0000 (23:58 -0700)]
GIT 1.5.2.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 15 Jun 2007 05:20:16 +0000 (22:20 -0700)]
Documentation: adjust to AsciiDoc 8
It turns out that the attribute definition we have had for a
long time to hide "^" character from AsciiDoc 7 was not honored
by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is
a similar breakage with the "compatible" mode with + characters.
The double colon at the end of definition list term needs
to be attached to the term, without a whitespace. After this
minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with
compatibility mode seems to produce reasonably good results.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 16 Jun 2007 06:48:35 +0000 (23:48 -0700)]
Avoid diff cost on "git log -z"
Johannes and Marco discovered that "git log -z" spent cycles in diff even
though there is no need to actually compute diffs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 16 Jun 2007 06:35:32 +0000 (23:35 -0700)]
git-branch --track: fix tracking branch computation.
The original code did not take hierarchical branch names into account at all.
[jc: cherry-picked
11f68d9 from 'master']
Tested-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 16 Jun 2007 06:33:06 +0000 (23:33 -0700)]
$EMAIL is a last resort fallback, as it's system-wide.
$EMAIL is a system-wide setup that is used for many many many
applications. If the git user chose a specific user.email setup,
then _this_ should be honoured rather than $EMAIL.
[jc: cherry-picked
ec563e8 from 'master']
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Tue, 5 Jun 2007 02:36:49 +0000 (03:36 +0100)]
merge-recursive: refuse to merge binary files
[jc: cherry-picked
9f30855 from 'master']
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Tue, 5 Jun 2007 02:36:11 +0000 (03:36 +0100)]
Move buffer_is_binary() to xdiff-interface.h
We already have two instances where we want to determine if a buffer
contains binary data as opposed to text.
[jc: cherry-picked
6bfce93e from 'master']
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Riesen [Wed, 13 Jun 2007 18:54:32 +0000 (20:54 +0200)]
Add a local implementation of hstrerror for the system which do not have it
The function converts the value of h_errno (last error of name
resolver library, see netdb.h).
One of systems which supposedly do not have the function is SunOS.
POSIX does not mandate its presence.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lars Hjemli [Wed, 13 Jun 2007 22:01:10 +0000 (00:01 +0200)]
gitmodules(5): remove leading period from synopsis
Asciidoc treats a line starting with a period followed by a title as a
blocktitle element. My introduction of gitmodules(5) unfortunatly broke
the documentation build process due to this processing, since it made
asciidoc generate an illegal (empty) synopsis element. Removing the leading
period fixes the problem and also makes gitmodules(5) use the same synopsis
notation as gitattributes(5).
Noticed-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Wed, 13 Jun 2007 23:12:20 +0000 (01:12 +0200)]
Generated spec file to be ignored is named git.spec and not git-core.spec
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Frank Lichtenheld [Fri, 15 Jun 2007 01:01:53 +0000 (03:01 +0200)]
cvsserver: Actually implement --export-all
Embarrassing bug number two in my options patch.
Also enforce that --export-all is only ever used together with an
explicit whitelist. Otherwise people might export every git repository
on the whole system without realising.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Frank Lichtenheld [Fri, 15 Jun 2007 01:01:52 +0000 (03:01 +0200)]
cvsserver: Let --base-path and pserver get along just fine
Embarassing bug number one in my options patch.
Since the code for --base-path support rewrote
the cvsroot value after comparing it with a possible
existing value (i.e. from pserver authentication)
the check always failed.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 13 Jun 2007 09:37:05 +0000 (02:37 -0700)]
git-svn: reduce stat() calls for a backwards compatibility check
Also, this fixes a bug where in an odd case a remote named
"config" could get renamed to ".metadata".
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 13 Jun 2007 09:37:04 +0000 (02:37 -0700)]
git-svn: test for creating new directories over svn://
As reported by Matthieu Moy, this is causing svnserve to
terminate connections, because it segfaults.
This test is disabled by default and can be enabled by setting
SVNSERVE_PORT to an unbound (for 127.0.0.1) TCP port in the
environment (in addition to SVN_TESTS=1). I'm not comfortable
with having a test start a daemon by default and take up a port
that could potentially stay running if the test failed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 13 Jun 2007 09:37:03 +0000 (02:37 -0700)]
git-svn: cleanup: factor out longest_common_path() function
I hadn't looked at this code in a while and had to read this
again to figure out what it did. To avoid having to do this
again in the future, I just gave gave the hunk a descriptive
name.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aneesh Kumar K.V [Wed, 13 Jun 2007 08:46:16 +0000 (14:16 +0530)]
gitview: run blame with -C -C
pass -C -C option to git-blame so that blame browsing
works when the data is copied over from other files.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aneesh Kumar K.V [Wed, 13 Jun 2007 08:46:15 +0000 (14:16 +0530)]
gitview: Fix the blame interface.
The async reading from the pipe was skipping some of the
input lines. Fix the same by making sure that we add the
partial content of the previous read to the newly read
data.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 13 Jun 2007 08:42:05 +0000 (01:42 -0700)]
More static
There still are quite a few symbols that ought to be static.
Signed-off-by: Junio C Hamano <gitster@pobox.com>