OSDN Git Service
Xuan Zhuo [Sat, 18 Sep 2021 06:06:15 +0000 (14:06 +0800)]
virtio_net: use netdev_warn_once to output warn when without enough queues
This warning is output when virtnet does not have enough queues, but it
only needs to be printed once to inform the user of this situation. It
is not necessary to print it every time. If the user loads xdp
frequently, this log appears too much.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
wangzhitong [Sat, 18 Sep 2021 09:39:10 +0000 (17:39 +0800)]
NET: IPV4: fix error "do not initialise globals to 0"
this patch fixes below Errors reported by checkpatch
ERROR: do not initialise globals to 0
+int cipso_v4_rbm_optfmt = 0;
Signed-off-by: wangzhitong <wangzhitong@uniontech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yajun Deng [Sat, 18 Sep 2021 09:04:10 +0000 (17:04 +0800)]
net: net_namespace: Fix undefined member in key_remove_domain()
The key_domain member in struct net only exists if we define CONFIG_KEYS.
So we should add the define when we used key_domain.
Fixes:
9b242610514f ("keys: Network namespace domain tag")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 17 Sep 2021 13:41:17 +0000 (14:41 +0100)]
net: dpaa2-mac: add support for more ethtool 10G link modes
Phylink documentation says:
Note that the PHY may be able to transform from one connection
technology to another, so, eg, don't clear 1000BaseX just
because the MAC is unable to BaseX mode. This is more about
clearing unsupported speeds and duplex settings. The port modes
should not be cleared; phylink_set_port_modes() will help with this.
So add the missing 10G modes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Marek Behún <kabel@kernel.org>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 18 Sep 2021 13:20:01 +0000 (14:20 +0100)]
Merge branch 'mptcp-next'
Mat Martineau says:
====================
mptcp: Add SOL_MPTCP getsockopt support
Here's the first new MPTCP feature for the v5.16 cycle, and I'll defer
to Florian's helpful description of the series implementing some new
MPTCP socket options:
========
This adds the MPTCP_INFO, MPTCP_TCPINFO and MPTCP_SUBFLOW_ADDRS
mptcp getsockopt optnames.
MPTCP_INFO exposes the mptcp_info struct as an alternative to the
existing netlink diag interface.
MPTCP_TCPINFO exposes the tcp_info struct.
Unlike SOL_TCP/TCP_INFO, this returns one struct for each active
subflow.
MPTCP_SUBFLOW_ADDRS allows userspace to discover the ip addresses/ports
used by the local and remote endpoints, one for each active tcp subflow.
MPTCP_TCPINFO and MPTCP_SUBFLOW_ADDRS share the same meta-header that
needs to be pre-filled by userspace with the size of the data structures
it expects. This is done to allow extension of the involved structs
later on, without breaking backwards compatibility.
The meta-structure can also be used to discover the required space
to obtain all information, as kernel will fill in the number of
active subflows even if there is not enough room for the requested info
itself.
More information is available in the individual patches.
Last patch adds test cases for the three optnames.
========
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 17 Sep 2021 23:33:22 +0000 (16:33 -0700)]
selftests: mptcp: add mptcp getsockopt test cases
Add a test program that retrieves the three info types:
1. mptcp meta information
2. tcp info for subflow
3. subflow endpoint addresses
For all three rudimentary checks are added.
1. Meta information checks that the logical mptcp
sequence numbers advance as expected, based on the bytes read
(init seq + bytes_received/sent) and the connection state
(after close, we should exect 1 extra byte due to FIN).
2. TCP info checks the number of bytes sent/received vs.
sums of read/write syscall return values.
3. Subflow endpoint addresses are checked vs. getsockname/getpeername
result.
Tests for forward compatibility (0-initialisation of output-only
fields in mptcp_subflow_data structure) are added as well.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 17 Sep 2021 23:33:21 +0000 (16:33 -0700)]
mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support
This retrieves the address pairs of all subflows currently
active for a given mptcp connection.
It re-uses the same meta-header as for MPTCP_TCPINFO.
A new structure is provided to hold the subflow
address data:
struct mptcp_subflow_addrs {
union {
__kernel_sa_family_t sa_family;
struct sockaddr sa_local;
struct sockaddr_in sin_local;
struct sockaddr_in6 sin6_local;
struct sockaddr_storage ss_local;
};
union {
struct sockaddr sa_remote;
struct sockaddr_in sin_remote;
struct sockaddr_in6 sin6_remote;
struct sockaddr_storage ss_remote;
};
};
Usage of the new getsockopt is very similar to
MPTCP_TCPINFO one.
Userspace allocates a
'struct mptcp_subflow_data', followed by one or
more 'struct mptcp_subflow_addrs', then inits the
mptcp_subflow_data structure as follows:
struct mptcp_subflow_addrs *sf_addr;
struct mptcp_subflow_data *addr;
socklen_t olen = sizeof(*addr) + (8 * sizeof(*sf_addr));
addr = malloc(olen);
addr->size_subflow_data = sizeof(*addr);
addr->num_subflows = 0;
addr->size_kernel = 0;
addr->size_user = sizeof(struct mptcp_subflow_addrs);
sf_addr = (struct mptcp_subflow_addrs *)(addr + 1);
and then retrieves the endpoint addresses via:
ret = getsockopt(fd, SOL_MPTCP, MPTCP_SUBFLOW_ADDRS,
addr, &olen);
If the call succeeds, kernel will have added up to 8
endpoint addresses after the 'mptcp_subflow_data' header.
Userspace needs to re-check 'olen' value to detect how
many bytes have been filled in by the kernel.
Userspace can check addr->num_subflows to discover when
there were more subflows that available data space.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 17 Sep 2021 23:33:20 +0000 (16:33 -0700)]
mptcp: add MPTCP_TCPINFO getsockopt support
Allow users to retrieve TCP_INFO data of all subflows.
Users need to pre-initialize a meta header that has to be
prepended to the data buffer that will be filled with the tcp info data.
The meta header looks like this:
struct mptcp_subflow_data {
__u32 size_subflow_data;/* size of this structure in userspace */
__u32 num_subflows; /* must be 0, set by kernel */
__u32 size_kernel; /* must be 0, set by kernel */
__u32 size_user; /* size of one element in data[] */
} __attribute__((aligned(8)));
size_subflow_data has to be set to 'sizeof(struct mptcp_subflow_data)'.
This allows to extend mptcp_subflow_data structure later on without
breaking backwards compatibility.
If the structure is extended later on, kernel knows where the
userspace-provided meta header ends, even if userspace uses an older
(smaller) version of the structure.
num_subflows must be set to 0. If the getsockopt request succeeds (return
value is 0), it will be updated to contain the number of active subflows
for the given logical connection.
size_kernel must be set to 0. If the getsockopt request is successful,
it will contain the size of the 'struct tcp_info' as known by the kernel.
This is informational only.
size_user must be set to 'sizeof(struct tcp_info)'.
This allows the kernel to only fill in the space reserved/expected by
userspace.
Example:
struct my_tcp_info {
struct mptcp_subflow_data d;
struct tcp_info ti[2];
};
struct my_tcp_info ti;
socklen_t olen;
memset(&ti, 0, sizeof(ti));
ti.d.size_subflow_data = sizeof(struct mptcp_subflow_data);
ti.d.size_user = sizeof(struct tcp_info);
olen = sizeof(ti);
ret = getsockopt(fd, SOL_MPTCP, MPTCP_TCPINFO, &ti, &olen);
if (ret < 0)
die_perror("getsockopt MPTCP_TCPINFO");
mptcp_subflow_data.num_subflows is populated with the number of
subflows that exist on the kernel side for the logical mptcp connection.
This allows userspace to re-try with a larger tcp_info array if the number
of subflows was larger than the available space in the ti[] array.
olen has to be set to the number of bytes that userspace has allocated to
receive the kernel data. It will be updated to contain the real number
bytes that have been copied to by the kernel.
In the above example, if the number if subflows was 1, olen is equal to
'sizeof(struct mptcp_subflow_data) + sizeof(struct tcp_info).
For 2 or more subflows olen is equal to 'sizeof(struct my_tcp_info)'.
If there was more data that could not be copied due to lack of space
in the option buffer, userspace can detect this by checking
mptcp_subflow_data->num_subflows.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 17 Sep 2021 23:33:19 +0000 (16:33 -0700)]
mptcp: add MPTCP_INFO getsockopt
Its not compatible with multipath-tcp.org kernel one.
1. The out-of-tree implementation defines a different 'struct mptcp_info',
with embedded __user addresses for additional data such as
endpoint addresses.
2. Mat Martineau points out that embedded __user addresses doesn't work
with BPF_CGROUP_RUN_PROG_GETSOCKOPT() which assumes that copying in
optsize bytes from optval provides all data that got copied to userspace.
This provides mptcp_info data for the given mptcp socket.
Userspace sets optlen to the size of the structure it expects.
The kernel updates it to contain the number of bytes that it copied.
This allows to append more information to the structure later.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 17 Sep 2021 23:33:18 +0000 (16:33 -0700)]
mptcp: add new mptcp_fill_diag helper
Will be re-used from getsockopt path.
Since diag can be a module, we can't export the helper from diag, it
needs to be moved to core.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 18 Sep 2021 13:14:39 +0000 (14:14 +0100)]
Merge branch 'macb-MII-on-RGMII'
Claudiu Beznea says:
====================
net: macb: add support for MII on RGMII interface
This series adds support for MII mode on RGMII interface (patches 3/4,
4/4). Along with this the series also contains minor cleanups (patches 1/3,
2/3) on macb.h.
Changes in v2:
- added patch 4/4 to enable MII on RGMII support for SAMA7G5 MAC IPs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Fri, 17 Sep 2021 13:26:15 +0000 (16:26 +0300)]
net: macb: enable mii on rgmii for sama7g5
Both MAC IPs available on SAMA7G5 support MII on RGMII feature.
Enable these by adding proper capability to proper macb_config
objects.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Fri, 17 Sep 2021 13:26:14 +0000 (16:26 +0300)]
net: macb: add support for mii on rgmii
Cadence IP has option to enable MII support on RGMII interface. This
could be selected though bit 28 of network control register. This option
is not enabled on all the IP versions thus add a software capability to
be selected by the proper implementation of this IP.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Fri, 17 Sep 2021 13:26:13 +0000 (16:26 +0300)]
net: macb: align for OSSMODE offset
Align for OSSMODE offset.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Fri, 17 Sep 2021 13:26:12 +0000 (16:26 +0300)]
net: macb: add description for SRTSM
Add description for SRTSM bit.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 17 Sep 2021 21:55:38 +0000 (14:55 -0700)]
net: bcmgenet: Patch PHY interface for dedicated PHY driver
When we are using a dedicated PHY driver (not the Generic PHY driver)
chances are that it is going to configure RGMII delays and do that in a
way that is incompatible with our incorrect interpretation of the
phy_interface value.
Add a quirk in order to reverse the PHY_INTERFACE_MODE_RGMII to the
value of PHY_INTERFACE_MODE_RGMII_ID such that the MAC continues to be
configured the way it used to be, but the PHY driver can account for
adding delays. Conversely when PHY_INTERFACE_MODE_RGMII_TXID is
specified, return PHY_INTERFACE_MODE_RGMII_RXID to the PHY since we will
have enabled a TXC MAC delay (id_mode_dis=0, meaning there is a delay
inserted).
This is not considered a bug fix at this point since it only affects
Broadcom STB platforms shipping with a Device Tree blob that is not
updatable in the field (quite a few devices out there) and which was
generated using the scripted Device Tree environment shipped with those
platforms' SDK.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 16 Sep 2021 21:40:37 +0000 (23:40 +0200)]
sky2: Stop printing VPD info to debugfs
Sky2 is parsing the VPD and adds the parsed information to its debugfs
file. This isn't needed in kernel, userspace tools like lspci can be
used to display such information nicely. Therefore remove this from
the driver.
lspci -vv:
Capabilities: [50] Vital Product Data
Product Name: Marvell Yukon
88E8070 Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: Yukon
88E8070
[EC] Engineering changes: Rev. 1.0
[MN] Manufacture ID: Marvell
[SN] Serial number: AbCdEfG970FD4
[CP] Extended capability: 01 10 cc 03
[RV] Reserved: checksum good, 9 byte(s) reserved
Read/write fields:
[RW] Read-write area: 1 byte(s) free
End
Relevant part in debugfs file:
0000:01:00.0 Product Data
Marvell Yukon
88E8070 Gigabit Ethernet Controller
Part Number: Yukon
88E8070
Engineering Level: Rev. 1.0
Manufacturer: Marvell
Serial Number: AbCdEfG970FD4
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/bbaee8ab-9b2e-de04-ee7b-571e094cc5fe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 17 Sep 2021 19:40:20 +0000 (12:40 -0700)]
Merge https://git./linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-09-17
We've added 63 non-merge commits during the last 12 day(s) which contain
a total of 65 files changed, 2653 insertions(+), 751 deletions(-).
The main changes are:
1) Streamline internal BPF program sections handling and
bpf_program__set_attach_target() in libbpf, from Andrii.
2) Add support for new btf kind BTF_KIND_TAG, from Yonghong.
3) Introduce bpf_get_branch_snapshot() to capture LBR, from Song.
4) IMUL optimization for x86-64 JIT, from Jie.
5) xsk selftest improvements, from Magnus.
6) Introduce legacy kprobe events support in libbpf, from Rafael.
7) Access hw timestamp through BPF's __sk_buff, from Vadim.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits)
selftests/bpf: Fix a few compiler warnings
libbpf: Constify all high-level program attach APIs
libbpf: Schedule open_opts.attach_prog_fd deprecation since v0.7
selftests/bpf: Switch fexit_bpf2bpf selftest to set_attach_target() API
libbpf: Allow skipping attach_func_name in bpf_program__set_attach_target()
libbpf: Deprecated bpf_object_open_opts.relaxed_core_relocs
selftests/bpf: Stop using relaxed_core_relocs which has no effect
libbpf: Use pre-setup sec_def in libbpf_find_attach_btf_id()
bpf: Update bpf_get_smp_processor_id() documentation
libbpf: Add sphinx code documentation comments
selftests/bpf: Skip btf_tag test if btf_tag attribute not supported
docs/bpf: Add documentation for BTF_KIND_TAG
selftests/bpf: Add a test with a bpf program with btf_tag attributes
selftests/bpf: Test BTF_KIND_TAG for deduplication
selftests/bpf: Add BTF_KIND_TAG unit tests
selftests/bpf: Change NAME_NTH/IS_NAME_NTH for BTF_KIND_TAG format
selftests/bpf: Test libbpf API function btf__add_tag()
bpftool: Add support for BTF_KIND_TAG
libbpf: Add support for BTF_KIND_TAG
libbpf: Rename btf_{hash,equal}_int to btf_{hash,equal}_int_tag
...
====================
Link: https://lore.kernel.org/r/20210917173738.3397064-1-ast@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Fri, 17 Sep 2021 18:15:50 +0000 (11:15 -0700)]
net: phy: bcm7xxx: Add EPHY entry for 72165
72165 is a 16nm process SoC with a 10/100 integrated Ethernet PHY,
create a new macro and set of functions for this different process type.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210917181551.2836036-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Chancellor [Fri, 17 Sep 2021 04:52:05 +0000 (21:52 -0700)]
ptp: ocp: Avoid operator precedence warning in ptp_ocp_summary_show()
Clang warns twice:
drivers/ptp/ptp_ocp.c:2065:16: error: operator '?:' has lower precedence
than '&'; '&' will be evaluated first
[-Werror,-Wbitwise-conditional-parentheses]
on & map ? " ON" : "OFF", src);
~~~~~~~~ ^
drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '&'
expression to silence this warning
on & map ? " ON" : "OFF", src);
^
( )
drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '?:'
expression to evaluate it first
on & map ? " ON" : "OFF", src);
^
on and map are both booleans so this should be a logical AND, which
clears up the operator precedence issue.
Fixes:
a62a56d04e63 ("ptp: ocp: Enable 4th timestamper / PPS generator")
Link: https://github.com/ClangBuiltLinux/linux/issues/1457
Suggested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20210917045204.1385801-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yonghong Song [Fri, 17 Sep 2021 04:33:43 +0000 (21:33 -0700)]
selftests/bpf: Fix a few compiler warnings
With clang building selftests/bpf, I hit a few warnings like below:
.../bpf_iter.c:592:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable]
__u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0;
^
.../bpf_iter.c:688:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable]
__u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0;
^
.../tc_redirect.c:657:6: warning: variable 'target_fd' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ASSERT_OK_PTR(nstoken, "setns " NS_FWD))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../tc_redirect.c:743:6: note: uninitialized use occurs here
if (target_fd >= 0)
^~~~~~~~~
Removing unused variables and initializing the previously-uninitialized variable
to ensure these warnings are gone.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210917043343.3711917-1-yhs@fb.com
Alexei Starovoitov [Fri, 17 Sep 2021 16:04:13 +0000 (09:04 -0700)]
Merge branch 'Improve set_attach_target() and deprecate open_opts.attach_prog_fd'
Andrii Nakryiko says:
====================
This patch set deprecates bpf_object_open_opts.attach_prog_fd (in libbpf 0.7+)
by extending bpf_program__set_attach_target() to support some more flexible
scenarios. Existing fexit_bpf2bpf selftest is updated accordingly to not use
deprecated APIs.
While at it, also deprecate no-op relaxed_core_relocs option (they are always
"relaxed").
Last patch also const-ifies all high-level libbpf attach APIs, as there is no
reason for them to assume bpf_program/bpf_map modifications.
Patch #1 also removes one more unneeded use of find_sec_def(), relying on
prog->sec_def that's set during bpf_object__open() operation, simplifying
upcoming refactoring a little bit more.
All these changes are preparatory patches before SEC() handling refactoring
that will come next.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Thu, 16 Sep 2021 01:58:36 +0000 (18:58 -0700)]
libbpf: Constify all high-level program attach APIs
Attach APIs shouldn't need to modify bpf_program/bpf_map structs, so
change all struct bpf_program and struct bpf_map pointers to const
pointers. This is completely backwards compatible with no functional
change.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-8-andrii@kernel.org
Andrii Nakryiko [Thu, 16 Sep 2021 01:58:35 +0000 (18:58 -0700)]
libbpf: Schedule open_opts.attach_prog_fd deprecation since v0.7
bpf_object_open_opts.attach_prog_fd makes a pretty strong assumption
that bpf_object contains either only single freplace BPF program or all
of BPF programs in BPF object are freplaces intended to replace
different subprograms of the same target BPF program. This seems both
a bit confusing, too assuming, and limiting.
We've had bpf_program__set_attach_target() API which allows more
fine-grained control over this, on a per-program level. As such, mark
open_opts.attach_prog_fd as deprecated starting from v0.7, so that we
have one more universal way of setting freplace targets. With previous
change to allow NULL attach_func_name argument, and especially combined
with BPF skeleton, arguable bpf_program__set_attach_target() is a more
convenient and explicit API as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-7-andrii@kernel.org
Andrii Nakryiko [Thu, 16 Sep 2021 01:58:34 +0000 (18:58 -0700)]
selftests/bpf: Switch fexit_bpf2bpf selftest to set_attach_target() API
Switch fexit_bpf2bpf selftest to bpf_program__set_attach_target()
instead of using bpf_object_open_opts.attach_prog_fd, which is going to
be deprecated. These changes also demonstrate the new mode of
set_attach_target() in which it allows NULL when the target is BPF
program (attach_prog_fd != 0).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-6-andrii@kernel.org
Andrii Nakryiko [Thu, 16 Sep 2021 01:58:33 +0000 (18:58 -0700)]
libbpf: Allow skipping attach_func_name in bpf_program__set_attach_target()
Allow to use bpf_program__set_attach_target to only set target attach
program FD, while letting libbpf to use target attach function name from
SEC() definition. This might be useful for some scenarios where
bpf_object contains multiple related freplace BPF programs intended to
replace different sub-programs in target BPF program. In such case all
programs will have the same attach_prog_fd, but different
attach_func_name. It's convenient to specify such target function names
declaratively in SEC() definitions, but attach_prog_fd is a dynamic
runtime setting.
To simplify such scenario, allow bpf_program__set_attach_target() to
delay BTF ID resolution till the BPF program load time by providing NULL
attach_func_name. In that case the behavior will be similar to using
bpf_object_open_opts.attach_prog_fd (which is marked deprecated since
v0.7), but has the benefit of allowing more control by user in what is
attached to what. Such setup allows having BPF programs attached to
different target attach_prog_fd with target functions still declaratively
recorded in BPF source code in SEC() definitions.
Selftests changes in the next patch should make this more obvious.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-5-andrii@kernel.org
Andrii Nakryiko [Thu, 16 Sep 2021 01:58:32 +0000 (18:58 -0700)]
libbpf: Deprecated bpf_object_open_opts.relaxed_core_relocs
It's relevant and hasn't been doing anything for a long while now.
Deprecated it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-4-andrii@kernel.org
Andrii Nakryiko [Thu, 16 Sep 2021 01:58:31 +0000 (18:58 -0700)]
selftests/bpf: Stop using relaxed_core_relocs which has no effect
relaxed_core_relocs option hasn't had any effect for a while now, stop
specifying it. Next patch marks it as deprecated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-3-andrii@kernel.org
Andrii Nakryiko [Thu, 16 Sep 2021 01:58:30 +0000 (18:58 -0700)]
libbpf: Use pre-setup sec_def in libbpf_find_attach_btf_id()
Don't perform another search for sec_def inside
libbpf_find_attach_btf_id(), as each recognized bpf_program already has
prog->sec_def set.
Also remove unnecessary NULL check for prog->sec_name, as it can never
be NULL.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-2-andrii@kernel.org
Krzysztof Kozlowski [Thu, 16 Sep 2021 17:05:08 +0000 (19:05 +0200)]
net: microchip: encx24j600: drop unneeded MODULE_ALIAS
The MODULE_DEVICE_TABLE already creates proper alias for spi driver.
Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Thu, 16 Sep 2021 10:38:33 +0000 (13:38 +0300)]
devlink: Delete not-used devlink APIs
Devlink core exported generously the functions calls that were used
by netdevsim tests or not used at all.
Delete such APIs with one exception - devlink_alloc_ns(). That function
should be spared from deleting because it is a special form of devlink_alloc()
needed for the netdevsim.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Thu, 16 Sep 2021 07:37:36 +0000 (15:37 +0800)]
net: stmmac: dwmac-visconti: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 17 Sep 2021 12:03:33 +0000 (13:03 +0100)]
octeontx2-af: Remove redundant initialization of variable blkaddr
The variable blkaddr is being initialized with a value that is never
read, it is being updated later on in a for-loop. The assignment is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 17 Sep 2021 11:57:47 +0000 (12:57 +0100)]
octeontx2-af: Fix uninitialized variable val
In the case where the condition !is_rvu_otx2(rvu) is false variable
val is not initialized and can contain a garbage value. Fix this by
initializing val to zero and bit-wise or'ing in BIT_ULL(51) to val
for the true condition case of !is_rvu_otx2(rvu).
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes:
4b5a3ab17c6c ("octeontx2-af: Hardware configuration for inline IPsec")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Fri, 17 Sep 2021 14:16:54 +0000 (14:16 +0000)]
net: e1000e: solve insmod 'Unknown symbol mutex_lock' error
After I turn on the CONFIG_LOCK_STAT=y, insmod e1000e.ko will report:
[ 5.641579] e1000e: Unknown symbol mutex_lock (err -2)
[ 90.775705] e1000e: Unknown symbol mutex_lock (err -2)
[ 132.252339] e1000e: Unknown symbol mutex_lock (err -2)
This problem fixed after include <linux/mutex.h>.
Signed-off-by: Hao Chen <chenhaoa@uniontech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Thu, 16 Sep 2021 07:37:29 +0000 (15:37 +0800)]
net: netsec: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 16 Sep 2021 21:27:41 +0000 (14:27 -0700)]
net: phy: broadcom: Enable 10BaseT DAC early wake
Enable the DAC early wake when then link operates at 10BaseT allows
power savings in the hundreds of milli Watts by shutting down the
transmitter. A number of errata have been issued for various Gigabit
PHYs and the recommendation is to enable both the early and forced DAC
wake to be on the safe side. This needs to be done dynamically based
upon the link state, which is why a link_change_notify callback is
utilized.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210916212742.1653088-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 17 Sep 2021 02:09:54 +0000 (19:09 -0700)]
Merge branch 'net-dsa-b53-clean-up-cpu-imp-ports'
Rafał Miłecki says:
====================
net: dsa: b53: Clean up CPU/IMP ports
This has been tested on:
1. Luxul XBR-4500 with used CPU port 5
[ 8.361438] b53-srab-switch
18007000.ethernet-switch: found switch: BCM53012, rev 0
2. Netgear R8000 with used CPU port 8
[ 4.453858] b53-srab-switch
18007000.ethernet-switch: found switch: BCM53012, rev 5
====================
Link: https://lore.kernel.org/r/20210916120354.20338-1-zajec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafał Miłecki [Thu, 16 Sep 2021 12:03:54 +0000 (14:03 +0200)]
net: dsa: b53: Drop unused "cpu_port" field
It's set but never used anymore.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafał Miłecki [Thu, 16 Sep 2021 12:03:53 +0000 (14:03 +0200)]
net: dsa: b53: Improve flow control setup on BCM5301x
According to the Broadcom's reference driver flow control needs to be
enabled for any CPU switch port (5, 7 or 8 - depending on which one is
used). Current code makes it work only for the port 5. Use
dsa_is_cpu_port() which solved that problem.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafał Miłecki [Thu, 16 Sep 2021 12:03:52 +0000 (14:03 +0200)]
net: dsa: b53: Drop BCM5301x workaround for a wrong CPU/IMP port
On BCM5301x port 8 requires a fixed link when used.
Years ago when b53 was an OpenWrt downstream driver (with configuration
based on sometimes bugged NVRAM) there was a need for a fixup. In case
of forcing fixed link for (incorrectly specified) port 5 the code had to
actually setup port 8 link.
For upstream b53 driver with setup based on DT there is no need for that
workaround. In DT we have and require correct ports setup.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafał Miłecki [Thu, 16 Sep 2021 12:03:51 +0000 (14:03 +0200)]
net: dsa: b53: Include all ports in "enabled_ports"
Make "enabled_ports" bitfield contain all available switch ports
including a CPU port. This way there is no need for fixup during
initialization.
For BCM53010, BCM53018 and BCM53019 include also other available ports.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 16 Sep 2021 20:58:38 +0000 (13:58 -0700)]
Merge git://git./linux/kernel/git/netdev/net
No conflicts!
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 16 Sep 2021 20:05:42 +0000 (13:05 -0700)]
Merge tag 'net-5.15-rc2' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- vhost_net: fix OoB on sendmsg() failure
- mlx5: bridge, fix uninitialized variable usage
- bnxt_en: fix error recovery regression
Current release - new code bugs:
- bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset()
Previous releases - regressions:
- r6040: restore MDIO clock frequency after MAC reset
- tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
- dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Previous releases - always broken:
- ptp: dp83640: don't define PAGE0, avoid compiler warning
- igc: fix tunnel segmentation offloads
- phylink: update SFP selected interface on advertising changes
- stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume
- mlx5e: fix mutual exclusion between CQE compression and HW TS
Misc:
- bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode
- sfc: fallback for lack of xdp tx queues
- hns3: add option to turn off page pool feature"
* tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
mlxbf_gige: clear valid_polarity upon open
igc: fix tunnel offloading
net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
net: wan: wanxl: define CROSS_COMPILE_M68K
selftests: nci: replace unsigned int with int
net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Revert "net: phy: Uniform PHY driver access"
net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
ptp: dp83640: don't define PAGE0
bnx2x: Fix enabling network interfaces without VFs
Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers""
tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
net-caif: avoid user-triggerable WARN_ON(1)
bpf, selftests: Add test case for mixed cgroup v1/v2
bpf, selftests: Add cgroup v1 net_cls classid helpers
bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode
bpf: Add oversize check before call kvcalloc()
net: hns3: fix the timing issue of VF clearing interrupt sources
net: hns3: fix the exception when query imp info
net: hns3: disable mac in flr process
...
Guenter Roeck [Thu, 9 Sep 2021 03:57:43 +0000 (20:57 -0700)]
net: 6pack: Fix tx timeout and slot time
tx timeout and slot time are currently specified in units of HZ. On
Alpha, HZ is defined as 1024. When building alpha:allmodconfig, this
results in the following error message.
drivers/net/hamradio/6pack.c: In function 'sixpack_open':
drivers/net/hamradio/6pack.c:71:41: error:
unsigned conversion from 'int' to 'unsigned char'
changes value from '256' to '0'
In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:
https://www.linux-ax25.org/wiki/6PACK
Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.
Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:
mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);
and the SIXP_TXDELAY walue is sent as a byte over the wire.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Tue, 28 Apr 2020 21:31:24 +0000 (23:31 +0200)]
drm/rockchip: cdn-dp-core: Make cdn_dp_core_resume __maybe_unused
With the new static annotation, the compiler warns when the functions
are actually unused:
drivers/gpu/drm/rockchip/cdn-dp-core.c:1123:12: error: 'cdn_dp_resume' defined but not used [-Werror=unused-function]
1123 | static int cdn_dp_resume(struct device *dev)
| ^~~~~~~~~~~~~
Mark them __maybe_unused to suppress that warning as well.
[ Not so 'new' static annotations any more, and I removed the part of
the patch that added __maybe_unused to cdn_dp_suspend(), because it's
used by the shutdown/remove code.
So only the resume function ends up possibly unused if CONFIG_PM isn't
set - Linus ]
Fixes:
7c49abb4c2f8 ("drm/rockchip: cdn-dp-core: Make cdn_dp_core_suspend/resume static")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Thu, 9 Sep 2021 18:47:14 +0000 (11:47 -0700)]
cpufreq: vexpress: Drop unused variable
arm:allmodconfig fails to build with the following error.
drivers/cpufreq/vexpress-spc-cpufreq.c:454:13: error:
unused variable 'cur_cluster'
Remove the unused variable.
Fixes:
bb8c26d9387f ("cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag")
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Thu, 9 Sep 2021 05:00:33 +0000 (22:00 -0700)]
alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile
Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine. One exception is alpha. This
results in a number of compile errors such as
drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
drivers/net/wan/lmc/lmc_main.c:1782:50: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type
drivers/atm/ambassador.c: In function 'do_loader_command':
drivers/atm/ambassador.c:1747:58: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type
Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 16 Sep 2021 18:14:47 +0000 (11:14 -0700)]
3com 3c515: make it compile on 64-bit architectures
This driver isn't enabled most places because of the ISA config
dependency, but alpha still has it. And I think the 'Jensen' actually
did have an ISA slot.
However, it doesn't build cleanly, because the "Vortex bus master" code
just casts the skb->data pointer to 'int':
outl((int) (skb->data), ioaddr + Wn7_MasterAddr);
which is all kinds of broken. Even on a good old traditional PC/AT it
would be broken because the high bits will be random kernel address
bits, but presumably the hardware ignores those bits. I mean, it's ISA.
We're talking 16MB dma limits. The "good old days".
Make the build happy with this kind of craziness by using the proper
isa_virt_to_bus() handling that the full bus master code uses anyway
(the Vortex bus mastering is a limited special case).
Who knows, this might even work.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 16 Sep 2021 17:32:00 +0000 (10:32 -0700)]
Merge tag 'for-5.15/parisc-4' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"Fix a build warning when using the PAGE0 pointer"
* tag 'for-5.15/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Use absolute_pointer() to define PAGE0
Linus Torvalds [Thu, 16 Sep 2021 17:26:48 +0000 (10:26 -0700)]
Merge tag 'm68k-for-v5.15-tag2' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k fixes from Geert Uytterhoeven:
- Warning fixes to mitigate CONFIG_WERROR=y
* tag 'm68k-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: mvme: Remove overdue #warnings in RTC handling
m68k: Double cast io functions to unsigned long
Srujana Challa [Thu, 16 Sep 2021 09:41:14 +0000 (15:11 +0530)]
octeontx2-af: Hardware configuration for inline IPsec
On OcteonTX2/CN10K SoC, the admin function (AF) is the only one
with all priviliges to configure HW and alloc resources, PFs and
it's VFs have to request AF via mailbox for all their needs.
This patch adds new mailbox messages for CPT PFs and VFs to configure
HW resources for inline-IPsec.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tianjia Zhang [Thu, 16 Sep 2021 03:37:38 +0000 (11:37 +0800)]
net/tls: support SM4 GCM/CCM algorithm
The RFC8998 specification defines the use of the ShangMi algorithm
cipher suites in TLS 1.3, and also supports the GCM/CCM mode using
the SM4 algorithm.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 15 Sep 2021 21:58:23 +0000 (14:58 -0700)]
Revert "net: wwan: iosm: firmware flashing and coredump collection"
The devlink parameters are not the right mechanism to pass
extra parameters to device flashing. The params added are
also undocumented.
This reverts commit
13bb8429ca98 ("net: wwan: iosm: firmware
flashing and coredump collection").
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Thompson [Wed, 15 Sep 2021 18:08:48 +0000 (14:08 -0400)]
mlxbf_gige: clear valid_polarity upon open
The network interface managed by the mlxbf_gige driver can
get into a problem state where traffic does not flow.
In this state, the interface will be up and enabled, but
will stop processing received packets. This problem state
will happen if three specific conditions occur:
1) driver has received more than (N * RxRingSize) packets but
less than (N+1 * RxRingSize) packets, where N is an odd number
Note: the command "ethtool -g <interface>" will display the
current receive ring size, which currently defaults to 128
2) the driver's interface was disabled via "ifconfig oob_net0 down"
during the window described in #1.
3) the driver's interface is re-enabled via "ifconfig oob_net0 up"
This patch ensures that the driver's "valid_polarity" field is
cleared during the open() method so that it always matches the
receive polarity used by hardware. Without this fix, the driver
needs to be unloaded and reloaded to correct this problem state.
Fixes:
f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Wed, 15 Sep 2021 15:59:46 +0000 (21:29 +0530)]
octeontx2-pf: CN10K: Hide RPM stats over ethtool
CN10K MAC block (RPM) differs in number of stats compared to Octeontx2
MAC block (CGX). RPM supports stats for each class of PFC and error
packets etc. It would be difficult for user to read stats from ethtool
and map to their definition.
New debugfs file is already added to read RPM stats along with their
definition. This patch adds proper checks such that RPM stats will not
be part of ethtool.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 15 Sep 2021 17:19:07 +0000 (10:19 -0700)]
igc: fix tunnel offloading
Checking tunnel offloading, it turns out that offloading doesn't work
as expected. The following script allows to reproduce the issue.
Call it as `testscript DEVICE LOCALIP REMOTEIP NETMASK'
=== SNIP ===
if [ $# -ne 4 ]
then
echo "Usage $0 DEVICE LOCALIP REMOTEIP NETMASK"
exit 1
fi
DEVICE="$1"
LOCAL_ADDRESS="$2"
REMOTE_ADDRESS="$3"
NWMASK="$4"
echo "Driver: $(ethtool -i ${DEVICE} | awk '/^driver:/{print $2}') "
ethtool -k "${DEVICE}" | grep tx-udp
echo
echo "Set up NIC and tunnel..."
ip addr add "${LOCAL_ADDRESS}/${NWMASK}" dev "${DEVICE}"
ip link set "${DEVICE}" up
sleep 2
ip link add vxlan1 type vxlan id 42 \
remote "${REMOTE_ADDRESS}" \
local "${LOCAL_ADDRESS}" \
dstport 0 \
dev "${DEVICE}"
ip addr add fc00::1/64 dev vxlan1
ip link set vxlan1 up
sleep 2
rm -f vxlan.pcap
echo "Running tcpdump and iperf3..."
( nohup tcpdump -i any -w vxlan.pcap >/dev/null 2>&1 ) &
sleep 2
iperf3 -c fc00::2 >/dev/null
pkill tcpdump
echo
echo -n "Max. Paket Size: "
tcpdump -r vxlan.pcap -nnle 2>/dev/null \
| grep "${LOCAL_ADDRESS}.*> ${REMOTE_ADDRESS}.*OTV" \
| awk '{print $8}' | awk -F ':' '{print $1}' \
| sort -n | tail -1
echo
ip link del vxlan1
ip addr del ${LOCAL_ADDRESS}/${NWMASK} dev "${DEVICE}"
=== SNAP ===
The expected outcome is
Max. Paket Size: 64904
This is what you see on igb, the code igc has been taken from.
However, on igc the output is
Max. Paket Size: 1516
so the GSO aggregate packets are segmented by the kernel before calling
igc_xmit_frame. Inside the subsequent call to igc_tso, the check for
skb_is_gso(skb) fails and the function returns prematurely.
It turns out that this occurs because the feature flags aren't set
entirely correctly in igc_probe. In contrast to the original code
from igb_probe, igc_probe neglects to set the flags required to allow
tunnel offloading.
Setting the same flags as igb fixes the issue on igc.
Fixes:
34428dff3679 ("igc: Add GSO partial support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cohen [Wed, 15 Sep 2021 04:47:27 +0000 (07:47 +0300)]
net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
Remove the assert from the callback priv lookup function since it does
not require RTNL lock and is already protected by flow_indr_block_lock.
This will avoid warnings from being emitted to dmesg if the driver
registers its callback after an ingress qdisc was created for a
netdevice.
The warnings started after the following patch was merged:
commit
74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adam Borowski [Sun, 12 Sep 2021 21:23:21 +0000 (23:23 +0200)]
net: wan: wanxl: define CROSS_COMPILE_M68K
It was used but never set. The hardcoded value from before the dawn of
time was non-standard; the usual name for cross-tools is $TRIPLET-$TOOL
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiang wangx [Thu, 16 Sep 2021 12:24:42 +0000 (20:24 +0800)]
selftests: nci: replace unsigned int with int
Should not use comparison of unsigned expressions < 0.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:58:42 +0000 (22:58 +0800)]
net: thunderx: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:58:34 +0000 (22:58 +0800)]
net: hinic: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:58:27 +0000 (22:58 +0800)]
net: ethoc: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:58:19 +0000 (22:58 +0800)]
net: enetc: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:58:11 +0000 (22:58 +0800)]
net: chelsio: cxgb4vf: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:57:56 +0000 (22:57 +0800)]
net: atl1e: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:57:48 +0000 (22:57 +0800)]
net: atl1c: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:57:41 +0000 (22:57 +0800)]
net: arc_emac: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Helge Deller [Thu, 16 Sep 2021 06:35:42 +0000 (08:35 +0200)]
parisc: Use absolute_pointer() to define PAGE0
Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning:
arch/parisc/kernel/setup.c: In function 'start_parisc':
error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0
Signed-off-by: Helge Deller <deller@gmx.de>
Co-Developed-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 16 Sep 2021 00:18:56 +0000 (17:18 -0700)]
Merge tag 'hyperv-fixes-signed-
20210915' of git://git./linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix kernel crash caused by uio driver (Vitaly Kuznetsov)
- Remove on-stack cpumask from HV APIC code (Wei Liu)
* tag 'hyperv-fixes-signed-
20210915' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: remove on-stack cpumask from hv_send_ipi_mask_allbutself
asm-generic/hyperv: provide cpumask_to_vpset_noself
Drivers: hv: vmbus: Fix kernel crash upon unbinding a device from uio_hv_generic driver
Linus Torvalds [Thu, 16 Sep 2021 00:06:01 +0000 (17:06 -0700)]
Merge tag 'rtc-5.15-fixes' of git://git./linux/kernel/git/abelloni/linux
Pull RTC fix from Alexandre Belloni:
"Fix a locking issue in the cmos rtc driver"
* tag 'rtc-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: cmos: Disable irq around direct invocation of cmos_interrupt()
Vladimir Oltean [Tue, 14 Sep 2021 13:47:26 +0000 (16:47 +0300)]
net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Sometimes when unbinding the mv88e6xxx driver on Turris MOX, these error
messages appear:
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 1 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 0 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 100 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 1 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 0 from fdb: -2
(and similarly for other ports)
What happens is that DSA has a policy "even if there are bugs, let's at
least not leak memory" and dsa_port_teardown() clears the dp->fdbs and
dp->mdbs lists, which are supposed to be empty.
But deleting that cleanup code, the warnings go away.
=> the FDB and MDB lists (used for refcounting on shared ports, aka CPU
and DSA ports) will eventually be empty, but are not empty by the time
we tear down those ports. Aka we are deleting them too soon.
The addresses that DSA complains about are host-trapped addresses: the
local addresses of the ports, and the MAC address of the bridge device.
The problem is that offloading those entries happens from a deferred
work item scheduled by the SWITCHDEV_FDB_DEL_TO_DEVICE handler, and this
races with the teardown of the CPU and DSA ports where the refcounting
is kept.
In fact, not only it races, but fundamentally speaking, if we iterate
through the port list linearly, we might end up tearing down the shared
ports even before we delete a DSA user port which has a bridge upper.
So as it turns out, we need to first tear down the user ports (and the
unused ones, for no better place of doing that), then the shared ports
(the CPU and DSA ports). In between, we need to ensure that all work
items scheduled by our switchdev handlers (which only run for user
ports, hence the reason why we tear them down first) have finished.
Fixes:
161ca59d39e9 ("net: dsa: reference count the MDB entries at the cross-chip notifier level")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210914134726.2305133-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 14 Sep 2021 14:05:15 +0000 (17:05 +0300)]
Revert "net: phy: Uniform PHY driver access"
This reverts commit
3ac8eed62596387214869319379c1fcba264d8c6, which did
more than it said on the box, and not only it replaced to_phy_driver
with phydev->drv, but it also removed the "!drv" check, without actually
explaining why that is fine.
That patch in fact breaks suspend/resume on any system which has PHY
devices with no drivers bound.
The stack trace is:
Unable to handle kernel NULL pointer dereference at virtual address
00000000000000e8
pc : mdio_bus_phy_suspend+0xd8/0xec
lr : dpm_run_callback+0x38/0x90
Call trace:
mdio_bus_phy_suspend+0xd8/0xec
dpm_run_callback+0x38/0x90
__device_suspend+0x108/0x3cc
dpm_suspend+0x140/0x210
dpm_suspend_start+0x7c/0xa0
suspend_devices_and_enter+0x13c/0x540
pm_suspend+0x2a4/0x330
Examples why that assumption is not fine:
- There is an MDIO bus with a PHY device that doesn't have a specific
PHY driver loaded, because mdiobus_register() automatically creates a
PHY device for it but there is no specific PHY driver in the system.
Normally under those circumstances, the generic PHY driver will be
bound lazily to it (at phy_attach_direct time). But some Ethernet
drivers attach to their PHY at .ndo_open time. Until then it, the
to-be-driven-by-genphy PHY device will not have a driver. The blamed
patch amounts to saying "you need to open all net devices before the
system can suspend, to avoid the NULL pointer dereference".
- There is any raw MDIO device which has 'plausible' values in the PHY
ID registers 2 and 3, which is located on an MDIO bus whose driver
does not set bus->phy_mask = ~0 (which prevents auto-scanning of PHY
devices). An example could be a MAC's internal MDIO bus with PCS
devices on it, for serial links such as SGMII. PHY devices will get
created for those PCSes too, due to that MDIO bus auto-scanning, and
although those PHY devices are not used, they do not bother anybody
either. PCS devices are usually managed in Linux as raw MDIO devices.
Nonetheless, they do not have a PHY driver, nor does anybody attempt
to connect to them (because they are not a PHY), and therefore this
patch breaks that.
The goal itself of the patch is questionable, so I am going for a
straight revert. to_phy_driver does not seem to have a need to be
replaced by phydev->drv, in fact that might even trigger code paths
which were not given too deep of a thought.
For instance:
phy_probe populates phydev->drv at the beginning, but does not clean it
up on any error (including EPROBE_DEFER). So if the phydev driver
requests probe deferral, phydev->drv will remain populated despite there
being no driver bound.
If a system suspend starts in between the initial probe deferral request
and the subsequent probe retry, we will be calling the phydev->drv->suspend
method, but _before_ any phydev->drv->probe call has succeeded.
That is to say, if the phydev->drv is allocating any driver-private data
structure in ->probe, it pretty much expects that data structure to be
available in ->suspend. But it may not. That is a pretty insane
environment to present to PHY drivers.
In the code structure before the blamed patch, mdio_bus_phy_may_suspend
would just say "no, don't suspend" to any PHY device which does not have
a driver pointer _in_the_device_structure_ (not the phydev->drv). That
would essentially ensure that ->suspend will never get called for a
device that has not yet successfully completed probe. This is the code
structure the patch is returning to, via the revert.
Fixes:
3ac8eed62596 ("net: phy: Uniform PHY driver access")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210914140515.2311548-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 14 Sep 2021 13:43:31 +0000 (16:43 +0300)]
net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
DSA supports connecting to a phy-handle, and has a fallback to a non-OF
based method of connecting to an internal PHY on the switch's own MDIO
bus, if no phy-handle and no fixed-link nodes were present.
The -ENODEV error code from the first attempt (phylink_of_phy_connect)
is what triggers the second attempt (phylink_connect_phy).
However, when the first attempt returns a different error code than
-ENODEV, this results in an unbalance of calls to phylink_create and
phylink_destroy by the time we exit the function. The phylink instance
has leaked.
There are many other error codes that can be returned by
phylink_of_phy_connect. For example, phylink_validate returns -EINVAL.
So this is a practical issue too.
Fixes:
aab9c4067d23 ("net: dsa: Plug in PHYLINK support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210914134331.2303380-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 15 Sep 2021 20:56:37 +0000 (13:56 -0700)]
qnx4: avoid stringop-overread errors
The qnx4 directory entries are 64-byte blocks that have different
contents depending on the a status byte that is in the last byte of the
block.
In particular, a directory entry can be either a "link info" entry with
a 48-byte name and pointers to the real inode information, or an "inode
entry" with a smaller 16-byte name and the full inode information.
But the code was written to always just treat the directory name as if
it was part of that "inode entry", and just extend the name to the
longer case if the status byte said it was a link entry.
That work just fine and gives the right results, but now that gcc is
tracking data structure accesses much more, the code can trigger a
compiler error about using up to 48 bytes (the long name) in a structure
that only has that shorter name in it:
fs/qnx4/dir.c: In function ‘qnx4_readdir’:
fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread]
51 | size = strnlen(de->di_fname, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from fs/qnx4/qnx4.h:3,
from fs/qnx4/dir.c:16:
include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here
45 | char di_fname[QNX4_SHORT_NAME_MAX];
| ^~~~~~~~
which is because the source code doesn't really make this whole "one of
two different types" explicit.
Fix this by introducing a very explicit union of the two types, and
basically explaining to the compiler what is really going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 6 Sep 2021 23:06:04 +0000 (16:06 -0700)]
sparc: avoid stringop-overread errors
The sparc mdesc code does pointer games with 'struct mdesc_hdr', but
didn't describe to the compiler how that header is then followed by the
data that the header describes.
As a result, gcc is now unhappy since it does stricter pointer range
tracking, and doesn't understand about how these things work. This
results in various errors like:
arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’:
arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
647 | if (!strcmp(names + ep[ret].name_offset, name))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
which are easily avoided by just describing 'struct mdesc_hdr' better,
and making the node_block() helper function look into that unsized
data[] that follows the header.
This makes the sparc64 build happy again at least for my cross-compiler
version (gcc version 11.2.1).
Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matteo Croce [Tue, 14 Sep 2021 23:54:00 +0000 (01:54 +0200)]
bpf: Update bpf_get_smp_processor_id() documentation
BPF programs run with migration disabled regardless of preemption, as
they are protected by migrate_disable(). Update the uapi documentation
accordingly.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210914235400.59427-1-mcroce@linux.microsoft.com
Grant Seltzer [Wed, 15 Sep 2021 02:19:52 +0000 (22:19 -0400)]
libbpf: Add sphinx code documentation comments
This adds comments above five functions in btf.h which document
their uses. These comments are of a format that doxygen and sphinx
can pick up and render. These are rendered by libbpf.readthedocs.org
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210915021951.117186-1-grantseltzer@gmail.com
Linus Torvalds [Wed, 15 Sep 2021 19:11:48 +0000 (12:11 -0700)]
Merge branch 'absolute-pointer' (patches from Guenter)
Merge absolute_pointer macro series from Guenter Roeck:
"Kernel test builds currently fail for several architectures with error
messages such as the following.
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0
[-Werror=stringop-overread]
Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses if gcc's builtin functions are used for
those operations.
This series introduces absolute_pointer() to fix the problem.
absolute_pointer() disassociates a pointer from its originating symbol
type and context, and thus prevents gcc from making assumptions about
pointers passed to memory operations"
* emailed patches from Guenter Roeck <linux@roeck-us.net>:
alpha: Use absolute_pointer to define COMMAND_LINE
alpha: Move setup.h out of uapi
net: i825xx: Use absolute_pointer for memcpy from fixed memory location
compiler.h: Introduce absolute_pointer macro
Guenter Roeck [Wed, 15 Sep 2021 03:52:27 +0000 (20:52 -0700)]
alpha: Use absolute_pointer to define COMMAND_LINE
alpha:allmodconfig fails to build with the following error
when using gcc 11.x.
arch/alpha/kernel/setup.c: In function 'setup_arch':
arch/alpha/kernel/setup.c:493:13: error:
'strcmp' reading 1 or more bytes from a region of size 0
Avoid the problem by declaring COMMAND_LINE as absolute_pointer().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Wed, 15 Sep 2021 03:52:26 +0000 (20:52 -0700)]
alpha: Move setup.h out of uapi
Most of the contents of setup.h have no value for userspace
applications. The file was probably moved to uapi accidentally.
Keep the file in uapi to define the alpha-specific COMMAND_LINE_SIZE.
Move all other defines to arch/alpha/include/asm/setup.h.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Wed, 15 Sep 2021 03:52:25 +0000 (20:52 -0700)]
net: i825xx: Use absolute_pointer for memcpy from fixed memory location
gcc 11.x reports the following compiler warning/error.
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
Use absolute_pointer() to work around the problem.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Wed, 15 Sep 2021 03:52:24 +0000 (20:52 -0700)]
compiler.h: Introduce absolute_pointer macro
absolute_pointer() disassociates a pointer from its originating symbol
type and context. Use it to prevent compiler warnings/errors such as
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masami Hiramatsu [Wed, 15 Sep 2021 00:53:38 +0000 (09:53 +0900)]
tools/bootconfig: Define memblock_free_ptr() to fix build error
The lib/bootconfig.c file is shared with the 'bootconfig' tooling, and
as a result, the changes incommit
77e02cf57b6c ("memblock: introduce
saner 'memblock_free_ptr()' interface") need to also be reflected in the
tooling header file.
So define the new memblock_free_ptr() wrapper, and remove unused __pa()
and memblock_free().
Fixes:
77e02cf57b6c ("memblock: introduce saner 'memblock_free_ptr()' interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yonghong Song [Wed, 15 Sep 2021 06:10:36 +0000 (23:10 -0700)]
selftests/bpf: Skip btf_tag test if btf_tag attribute not supported
Commit
c240ba287890 ("selftests/bpf: Add a test with a bpf
program with btf_tag attributes") added btf_tag selftest
to test BTF_KIND_TAG generation from C source code, and to
test kernel validation of generated BTF types.
But if an old clang (clang 13 or earlier) is used, the
following compiler warning may be seen:
progs/tag.c:23:20: warning: unknown attribute 'btf_tag' ignored
and the test itself is marked OK. The compiler warning is bad
and the test itself shouldn't be marked OK.
This patch added the check for btf_tag attribute support.
If btf_tag is not supported by the clang, the attribute will
not be used in the code and the test will be marked as skipped.
For example, with clang 13:
./test_progs -t btf_tag
#21 btf_tag:SKIP
Summary: 1/0 PASSED, 1 SKIPPED, 0 FAILED
The selftests/README.rst is updated to clarify when the btf_tag
test may be skipped.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210915061036.2577971-1-yhs@fb.com
David S. Miller [Wed, 15 Sep 2021 15:17:16 +0000 (16:17 +0100)]
Merge branch 'mlxsw-Add-support-for-transceiver-modules-reset'
Ido Schimmel says:
====================
mlxsw: Add support for transceiver modules reset
This patchset prepares mlxsw for future transceiver modules related [1]
changes and adds reset support via the existing 'ETHTOOL_RESET'
interface.
Patches #1-#6 are relatively straightforward preparations.
Patch #7 tracks the number of logical ports that are mapped to the
transceiver module and the number of logical ports using it that are
administratively up. Needed for both reset support and power mode policy
support.
Patches #8-#9 add required fields in device registers.
Patch #10 implements support for ethtool_ops::reset in order to reset
transceiver modules.
[1] https://lore.kernel.org/netdev/
20210824130344.
1828076-1-idosch@idosch.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:14 +0000 (13:13 +0300)]
mlxsw: Add support for transceiver modules reset
Implement support for ethtool_ops::reset in order to reset transceiver
modules. The module backing the netdev is reset when the 'ETH_RESET_PHY'
flag is set. After a successful reset, the flag is cleared by the driver
and other flags are ignored. This is in accordance with the interface
documentation:
"The reset() operation must clear the flags for the components which
were actually reset. On successful return, the flags indicate the
components which were not reset, either because they do not exist in the
hardware or because they cannot be reset independently. The driver must
never reset any components that were not requested."
Reset is useful in order to allow a module to transition out of a fault
state. From section 6.3.2.12 in CMIS 5.0: "Except for a power cycle, the
only exit path from the ModuleFault state is to perform a module reset
by taking an action that causes the ResetS transition signal to become
TRUE (see Table 6-11)".
An error is returned when the netdev is administratively up:
# ip link set dev swp11 up
# ethtool --reset swp11 phy
ETHTOOL_RESET 0x40
Cannot issue ETHTOOL_RESET: Invalid argument
# ip link set dev swp11 down
# ethtool --reset swp11 phy
ETHTOOL_RESET 0x40
Components reset: 0x40
An error is returned when the module is shared by multiple ports (split
ports) and the "phy-shared" flag is not set:
# devlink port split swp11 count 4
# ethtool --reset swp11s0 phy
ETHTOOL_RESET 0x40
Cannot issue ETHTOOL_RESET: Invalid argument
# ethtool --reset swp11s0 phy-shared
ETHTOOL_RESET 0x400000
Components reset: 0x400000
# devlink port unsplit swp11s0
# ethtool --reset swp11 phy
ETHTOOL_RESET 0x40
Components reset: 0x40
An error is also returned when one of the ports using the module is
administratively up:
# devlink port split swp11 count 4
# ip link set dev swp11s1 up
# ethtool --reset swp11s0 phy-shared
ETHTOOL_RESET 0x400000
Cannot issue ETHTOOL_RESET: Invalid argument
# ip link set dev swp11s1 down
# ethtool --reset swp11s0 phy-shared
ETHTOOL_RESET 0x400000
Components reset: 0x400000
Reset is performed by writing to the "rst" bit of the PMAOS register,
which instructs the firmware to assert the reset signal connected to the
module for a fixed amount of time.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:13 +0000 (13:13 +0300)]
mlxsw: Make PMAOS pack function more generic
The PMAOS register has enable bits (e.g., PMAOS.ee) that allow changing
only a subset of the fields, which is exactly what subsequent patches
will need to do. Instead of passing multiple arguments to its pack
function, only pass the module index and let the rest be set by the
different callers.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:12 +0000 (13:13 +0300)]
mlxsw: reg: Add fields to PMAOS register
The Ports Module Administrative and Operational Status (PMAOS) register
configures and retrieves the per-module status. Extend it with fields
required to support various module settings such as reset and power
mode.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:11 +0000 (13:13 +0300)]
mlxsw: Track per-module port status
In the common port module core, track the number of logical ports that
are mapped to the port module and the number of logical ports using it
that are administratively up.
This will be used by later patches to potentially veto and control
certain operations on the module, such as reset and setting its power
mode.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:10 +0000 (13:13 +0300)]
mlxsw: spectrum: Do not return an error in mlxsw_sp_port_module_unmap()
The return value is never checked. Allows us to simplify a later patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:09 +0000 (13:13 +0300)]
mlxsw: spectrum: Do not return an error in ndo_stop()
The return value is not checked by the networking stack. Allows us to
simplify a later patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:08 +0000 (13:13 +0300)]
mlxsw: core_env: Convert 'module_info_lock' to a mutex
After the previous patch, the lock is always taken in process context so
it can be converted to a mutex. It is needed for future changes where we
will need to be able to sleep when holding the lock.
Convert the lock to a mutex.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:07 +0000 (13:13 +0300)]
mlxsw: core_env: Defer handling of module temperature warning events
Module temperature events are currently handled in softIRQ context,
requiring the 'module_info_lock' to be a spin lock. In future patchsets
we will need to be able to hold the lock while sleeping.
Therefore, defer handling of these events using a work queue so that the
next patch will be able to convert the lock to a mutex.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:06 +0000 (13:13 +0300)]
mlxsw: core: Remove mlxsw_core_is_initialized()
After the previous patch, the switch driver is always initialized last,
making this function redundant.
Remove it.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:05 +0000 (13:13 +0300)]
mlxsw: core: Initialize switch driver last
Commit
961cf99a074f ("mlxsw: core: Re-order initialization sequence")
changed the initialization sequence so that the switch driver (e.g.,
mlxsw_spectrum) is initialized before registration with the hwmon and
thermal subsystems.
This was done in order to avoid situations where hwmon/thermal code uses
features not supported by current firmware version, which is only
validated as part of switch driver initialization.
Later, commit
b79cb787ac70 ("mlxsw: Move fw flashing code into core.c")
moved firmware validation and flashing code from the switch driver to
mlxsw_core so that it is performed before driver initialization.
Therefore, change the initialization sequence back to its original form.
In addition to being more straightforward, it will allow us to simplify
parts of the code in subsequent patches and future patchsets.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Sep 2021 15:12:55 +0000 (16:12 +0100)]
Merge branch 'devlink-delete-publidh-api'
Leon Romanovsky says:
====================
devlink: Delete publish of single parameter API
This short series removes the single parameter publish/unpublish API
that does nothing expect mimics already existing
devlink_paramss_*publish calls.
In near future, we will be able to delete devlink_paramss_*publish too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Tue, 14 Sep 2021 12:58:29 +0000 (15:58 +0300)]
devlink: Delete not-used single parameter notification APIs
There is no need in specific devlink_param_*publish(), because same
output can be achieved by using devlink_params_*publish() in correct
places.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Tue, 14 Sep 2021 12:58:28 +0000 (15:58 +0300)]
net/mlx5: Publish and unpublish all devlink parameters at once
The devlink parameters were published in two steps despite being static
and known in advance.
First step was to use devlink_params_publish() which iterated over all
known up to that point parameters and sent notification messages.
In second step, the call was devlink_param_publish() that looped over
same parameters list and sent notification for new parameters.
In order to simplify the API, move devlink_params_publish() to be called
when all parameters were already added and save the need to iterate over
parameters list again.
As a side effect, this change fixes the error unwind flow in which
parameters were not marked as unpublished.
Fixes:
82e6c96f04e1 ("net/mlx5: Register to devlink ingress VLAN filter trap")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Sep 2021 14:46:02 +0000 (15:46 +0100)]
Merge branch 'qdisc-visibility'
Jakub Kicinski says:
====================
net: sched: update default qdisc visibility after Tx queue cnt changes
Matthew noticed that number of children reported by mq does not match
number of queues on reconfigured interfaces. For example if mq is
instantiated when there is 8 queues it will always show 8 children,
regardless of config being changed:
# ethtool -L eth0 combined 8
# tc qdisc replace dev eth0 root handle 100: mq
# tc qdisc show dev eth0
qdisc mq 100: root
qdisc pfifo_fast 0: parent 100:8 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:7 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:6 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:5 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:4 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:3 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:2 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:1 bands 3 priomap 1 2 ...
# ethtool -L eth0 combined 1
# tc qdisc show dev eth0
qdisc mq 100: root
qdisc pfifo_fast 0: parent 100:8 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:7 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:6 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:5 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:4 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:3 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:2 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:1 bands 3 priomap 1 2 ...
# ethtool -L eth0 combined 32
# tc qdisc show dev eth0
qdisc mq 100: root
qdisc pfifo_fast 0: parent 100:8 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:7 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:6 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:5 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:4 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:3 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:2 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:1 bands 3 priomap 1 2 ...
This patchset fixes this by hashing and unhasing the default
child qdiscs as number of queues gets adjusted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>