OSDN Git Service
Subbaraya Sundeep [Tue, 17 Aug 2021 04:44:43 +0000 (10:14 +0530)]
octeontx2-af: Modify install flow error codes
When installing a flow using npc_install_flow
mailbox there are number of reasons to reject
the request like caller is not permitted,
invalid channel specified in request, flow
not supported in extraction profile and so on.
Hence define new error codes for npc flows and use
them instead of generic error codes.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 17 Aug 2021 08:51:19 +0000 (09:51 +0100)]
Merge tag 'mlx5-updates-2021-08-16' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-08-16
The following patchset provides two separate mlx5 updates
1) Ethtool RSS context and MQPRIO channel mode support:
1.1) enable mlx5e netdev driver to allow creating Transport Interface RX
(TIRs) objects on the fly to be used for ethtool RSS contexts and
TX MQPRIO channel mode
1.2) Introduce mlx5e_rss object to manage such TIRs.
1.3) Ethtool support for RSS context
1.4) Support MQPRIO channel mode
2) Bridge offloads Lag support:
to allow adding bond net devices to mlx5 bridge
2.1) Address bridge port by (vport_num, esw_owner_vhca_id) pair
since vport_num is only unique per eswitch and in lag mode we
need to manage ports from both eswitches.
2.2) Allow connectivity between representors of different eswitch
instances that are attached to same bridge
2.3) Bridge LAG, Require representors to be in shared FDB mode and
introduce local and peer ports representors,
match on paired eswitch metadata in peer FDB entries,
And finally support addition/deletion and aging of peer flows.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Luke Hsiao [Mon, 16 Aug 2021 20:51:06 +0000 (20:51 +0000)]
tcp: enable data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
Since the original TFO server code was implemented in commit
168a8f58059a22feb9e9a2dcc1b8053dbbbc12ef ("tcp: TCP Fast Open Server -
main code path") the TFO server code has supported the sysctl bit flag
TFO_SERVER_COOKIE_NOT_REQD. Currently, when the TFO_SERVER_ENABLE and
TFO_SERVER_COOKIE_NOT_REQD sysctl bit flags are set, a server connection
will accept a SYN with N bytes of data (N > 0) that has no TFO cookie,
create a new fast open connection, process the incoming data in the SYN,
and make the connection ready for accepting. After accepting, the
connection is ready for read()/recvmsg() to read the N bytes of data in
the SYN, ready for write()/sendmsg() calls and data transmissions to
transmit data.
This commit changes an edge case in this feature by changing this
behavior to apply to (N >= 0) bytes of data in the SYN rather than only
(N > 0) bytes of data in the SYN. Now, a server will accept a data-less
SYN without a TFO cookie if TFO_SERVER_COOKIE_NOT_REQD is set.
Caveat! While this enables a new kind of TFO (data-less empty-cookie
SYN), some firewall rules setup may not work if they assume such packets
are not legit TFOs and will filter them.
Signed-off-by: Luke Hsiao <lukehsiao@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210816205105.2533289-1-luke.w.hsiao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 17 Aug 2021 00:18:49 +0000 (17:18 -0700)]
Merge branch 'ptp-ocp-minor-updates-and-fixes'
Jonathan Lemon says:
====================
ptp: ocp: minor updates and fixes.
Fix errors spotted by automated tools.
Add myself to the MAINTAINERS for the ptp_ocp driver.
====================
Link: https://lore.kernel.org/r/20210816221337.390645-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonathan Lemon [Mon, 16 Aug 2021 22:13:37 +0000 (15:13 -0700)]
MAINTAINERS: Update for ptp_ocp driver.
Add maintainer info for the OpenCompute PTP driver.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonathan Lemon [Mon, 16 Aug 2021 22:13:36 +0000 (15:13 -0700)]
ptp: ocp: Have Kconfig select NET_DEVLINK
NET doesn't imply NET_DEVLINK. Select this separately, so that
random config combinations don't complain.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
773bda964921 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonathan Lemon [Mon, 16 Aug 2021 22:13:35 +0000 (15:13 -0700)]
ptp: ocp: Fix error path for pci_ocp_device_init()
If ptp_ocp_device_init() fails, pci_disable_device() is skipped.
Fix the error handling so this case is covered. Update ptp_ocp_remove()
so the normal exit path is identical.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
773bda964921 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonathan Lemon [Mon, 16 Aug 2021 22:13:34 +0000 (15:13 -0700)]
ptp: ocp: Fix uninitialized variable warning spotted by clang.
If attempting to flash the firmware with a blob of size 0,
the entire write loop is skipped and the uninitialized err
is returned. Fix by setting to 0 first.
Fixes:
773bda964921 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vlad Buslov [Sat, 17 Jul 2021 15:05:44 +0000 (18:05 +0300)]
net/mlx5: Bridge, support LAG
Allow adding bond net devices to mlx5 bridge with following changes:
- Modify bridge representor code to obtain uplink represetor that belongs
to eswitch that is registered for notification. Require representor to be
in shared FDB mode. If representor is the lag master, then consider its
port as local, otherwise treat it as peer.
- Use devcom to match on paired eswitch metadata in peer FDB entries. This
is necessary for shared FDB LAG to function since packets are always
received on active eswitch instance as opposed to parent eswitch of port.
- Support for deleting peer flows when receiving
SWITCHDEV_FDB_DEL_TO_BRIDGE notification was implemented in one of previous
patches in series. Now also implement support for handling
SWITCHDEV_FDB_ADD_TO_BRIDGE which can be generated on peer by bridge update
workqueue task in LAG configuration. Refresh the flow 'lastuse' timestamp
to current jiffies when receiving such notification on eswitch that manages
the local FDB entry. This allows peer entries to prevent ageing of the FDB.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Fri, 25 Jun 2021 12:21:48 +0000 (15:21 +0300)]
net/mlx5: Bridge, allow merged eswitch connectivity
Allow connectivity between representors of different eswitch instances that
are attached to same bridge when merged_eswitch capability is enabled. Add
ports of peer eswitch to bridge instance and mark them with
MLX5_ESW_BRIDGE_PORT_FLAG_PEER. Mark FDBs offloaded on peer ports with
MLX5_ESW_BRIDGE_FLAG_PEER flag. Such FDBs can only be aged out on their
local eswitch instance, which then sends SWITCHDEV_FDB_DEL_TO_BRIDGE event.
Listen to the event on mlx5 bridge implementation and delete peer FDBs in
event handler.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Fri, 23 Jul 2021 08:15:13 +0000 (11:15 +0300)]
net/mlx5: Bridge, extract FDB delete notification to function
SWITCHDEV_FDB_DEL_TO_BRIDGE notification is generated in multiple places in
bridge code. Following patch in series changes the condition for the
notification. Extract the notification into dedicated helper function
mlx5_esw_bridge_fdb_del_notify() to only modify it in single place in the
future changes.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Thu, 17 Jun 2021 15:07:29 +0000 (18:07 +0300)]
net/mlx5: Bridge, identify port by vport_num+esw_owner_vhca_id pair
Following patches in series allow traffic between vports of different
eswitch instances, which requires addressing bridge port by
vport_num+esw_owner_vhca_id pair since vport_num is only unique
per-eswitch. As a preparation, extend struct mlx5_esw_bridge_port with
'esw_owner_vhca_id' field and use it as part of key for
mlx5_esw_bridge->vports xarray.
With this change we can't rely on switchdev_handle_port_obj_add() helper to
get mlx5 representor from stacked device because we need specifically
representor from parent eswitch that registered the callback to obtain
correct esw_owner_vhca_id. The helper doesn't allow passing additional
parameters to predicate function and doesn't provide access to the notifier
block to obtain eswitch through br_offloads. Implement custom helpers to
obtain mlx5 representor and use them in
mlx5_esw_bridge_port_obj_{add|del|attr_set}() implementations.
Remove direct pointer to parent bridge from struct mlx5_vport as it is no
longer needed.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Sun, 18 Jul 2021 15:55:45 +0000 (18:55 +0300)]
net/mlx5: Bridge, obtain core device from eswitch instead of priv
Following patches in series will pass bond device to bridge, which means
the code can't assume the device is mlx5 representor. Moreover, the core
device can be easily obtained from eswitch instance, so there is no reason
for more complex code that obtains struct mlx5_priv from net_device in
order to use its mdev. Refactor the code to use esw->dev instead of
priv->mdev.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Thu, 17 Jun 2021 12:32:56 +0000 (15:32 +0300)]
net/mlx5: Bridge, release bridge in same function where it is taken
Refactor mlx5_esw_bridge_vport_link() to release the bridge instance if
mlx5_esw_bridge_vport_init() returned an error instead of relying on it to
release the bridge. This improves the design because object instance is
taken and released in same layer and simplifies following patches that add
more logic to mlx5_esw_bridge_vport_link().
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Wed, 11 Aug 2021 12:06:21 +0000 (15:06 +0300)]
net/mlx5e: Support MQPRIO channel mode
Add support for MQPRIO channel mode, in which a partition to TCs
is defined over the channels. We allow partitions with contiguous
queue indices, with no holes within. We do not allow modification
to the num of channels while this MQPRIO mode is active.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Wed, 11 Aug 2021 12:02:12 +0000 (15:02 +0300)]
net/mlx5e: Handle errors of netdev_set_num_tc()
Add handling for failures in netdev_set_num_tc().
Let mlx5e_netdev_set_tcs return an int.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Tue, 6 Jul 2021 11:11:57 +0000 (14:11 +0300)]
net/mlx5e: Maintain MQPRIO mode parameter
This is in preparation for supporting MQPRIO CHANNEL mode in
downstream patch, in addition to DCB mode that's supported today.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Tue, 6 Jul 2021 10:44:19 +0000 (13:44 +0300)]
net/mlx5e: Abstract MQPRIO params
Abstract the MQPRIO params into a struct.
Use a getter for DCB mode num_tcs.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Mon, 16 Aug 2021 13:31:57 +0000 (16:31 +0300)]
net/mlx5e: Support flow classification into RSS contexts
Extend the existing flow classification support, to steer
flows not only directly to a receive ring, but also into
the new RSS contexts.
Create needed TIR objects on demand, and hold reference
on the RSS context.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Mon, 16 Aug 2021 13:30:04 +0000 (16:30 +0300)]
net/mlx5e: Support multiple RSS contexts
Add support to multiple RSS contexts. Resources of the non-default
RSS contexts are allocated and created on demand. Each RSS context
can be controlled and configured separately, via the implemented
ethtool ops. Here we limit the num of total contexts to 16.
We do not enforce any kind of new limitation over the indirection table
content. More specifically, two separate contexts can be configured to
fully or partially point to the same set of receive rings.
The default RSS context (index 0) is created with its full set of TIRs.
All other contexts are created with an empty set, then TIRs are added
upon first usage when steering rules are added.
We use a reference counting mechanism to make sure an RSS context is
not removed before the rules pointing to it.
Block ethtool set_channels operations when multiple RSS contexts exist,
as currently the kernel doesn't protect against inconsistent channels
configs that break non-default RSS contexts.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Sun, 15 Aug 2021 11:38:08 +0000 (14:38 +0300)]
net/mlx5e: Dynamically allocate TIRs in RSS contexts
Move from static to dynamic memory allocations for TIR.
This is in preparation to supporting on-demand TIR operations in
downstream patches, where every RSS context will be init with an
empty set of TIRs.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Mon, 16 Aug 2021 12:50:24 +0000 (15:50 +0300)]
net/mlx5e: Convert RSS to a dedicated object
Code related to RSS is now encapsulated into a dedicated object and put
into new files en/rss.{c,h}. All usages are converted.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Sun, 15 Aug 2021 11:21:46 +0000 (14:21 +0300)]
net/mlx5e: Introduce abstraction of RSS context
Bring all fields that define and maintain RSS behavior together
into a new structure.
Align all usages with this new structure. Keep it hidden within
rx_res.c.
This helps supporting multiple RSS contexts in downstream patch.
Use dynamic allocations for the RSS context.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Wed, 21 Jul 2021 12:23:57 +0000 (15:23 +0300)]
net/mlx5e: Introduce TIR create/destroy API in rx_res
Take TIR control operations in rx_res into functions.
This is in preparation to supporting on-demand TIR operations in
downstream patches.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Thu, 12 Aug 2021 12:19:00 +0000 (15:19 +0300)]
net/mlx5e: Do not try enable RSS when resetting indir table
All calls to mlx5e_rx_res_rss_set_indir_uniform() occur while the RSS
state is inactive, i.e. the RQT is pointing to the drop RQ, not to the
channels' RQs.
It means that the "apply" part of the function is not called.
Remove this part from the function, and document the change. It will be
useful for next patches in the series, allows code simplifications when
multiple RSS contexts are introduced.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jakub Kicinski [Mon, 16 Aug 2021 22:12:15 +0000 (15:12 -0700)]
Merge branch 'net-hns3-add-support-ethtool-extended-link-state'
Guangbin Huang says:
====================
net: hns3: add support ethtool extended link state
This series adds support for ethtool extended link state in the HNS3
ethernet driver to add one additional information for user to know
why a link is not up.
====================
Link: https://lore.kernel.org/r/1629080129-46507-1-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guangbin Huang [Mon, 16 Aug 2021 02:15:29 +0000 (10:15 +0800)]
net: hns3: add support ethtool extended link state
In order to know the reason of link up failure, add supporting ethtool
extended link state. Driver reads the link status code from firmware if
in link down state and converts it to ethtool extended link state.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guangbin Huang [Mon, 16 Aug 2021 02:15:28 +0000 (10:15 +0800)]
net: hns3: add header file hns3_ethtoo.h
Add a new file hns3_ethtool.h, and move struct type definitions from
hns3_ethtool.c to hns3_ethtool.h.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guangbin Huang [Mon, 16 Aug 2021 02:15:27 +0000 (10:15 +0800)]
ethtool: add two link extended substates of bad signal integrity
ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST means the input
external clock signal for SerDes is too weak or lost.
ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS means the received signal for
SerDes is too weak because analog loss of signal.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guangbin Huang [Mon, 16 Aug 2021 02:15:26 +0000 (10:15 +0800)]
docs: ethtool: Add two link extended substates of bad signal integrity
Add documentation for two bad signal integrity substates:
ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST
ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antoine Tenart [Mon, 16 Aug 2021 10:08:28 +0000 (12:08 +0200)]
bonding: improve nl error msg when device can't be enslaved because of IFF_MASTER
Use a more user friendly netlink error message when a device can't be
enslaved because it has IFF_MASTER, by not referring directly to a
kernel internal flag.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Aug 2021 12:58:00 +0000 (13:58 +0100)]
Merge branch 'bridge-mcast-fixes'
Nikolay Aleksandrov says:
====================
net: bridge: mcast: fixes for mcast querier state
These three fix querier state dumping. The first patch can be considered
a minor behaviour improvement, it avoids dumping querier state when mcast
snooping is disabled. The second patch was a report of sizeof(0) used
for nested netlink attribute size which should be just 0, and the third
patch accounts for IPv6 querier state size when allocating skb for
notifications.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Mon, 16 Aug 2021 10:11:34 +0000 (13:11 +0300)]
net: bridge: mcast: account for ipv6 size when dumping querier state
We need to account for the IPv6 attributes when dumping querier state.
Fixes:
5e924fe6ccfd ("net: bridge: mcast: dump ipv6 querier state")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Mon, 16 Aug 2021 10:11:33 +0000 (13:11 +0300)]
net: bridge: mcast: drop sizeof for nest attribute's zero size
This was a dumb error I made instead of writing nla_total_size(0)
for a nest attribute, I wrote nla_total_size(sizeof(0)).
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
606433fe3e11 ("net: bridge: mcast: dump ipv4 querier state")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Mon, 16 Aug 2021 10:11:32 +0000 (13:11 +0300)]
net: bridge: mcast: don't dump querier state if snooping is disabled
A minor improvement to avoid dumping mcast ctx querier state if snooping
is disabled for that context (either bridge or vlan).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Aug 2021 10:36:04 +0000 (11:36 +0100)]
Merge branch 'stmmac-per-queue-stats'
Vijayakannan Ayyathurai says:
====================
net: stmmac: Add ethtool per-queue statistic
Adding generic ethtool per-queue statistic framework to display the
statistics for each rx/tx queue. In future, users can avail it to add
more per-queue specific counters. Number of rx/tx queues displayed is
depending on the available rx/tx queues in that particular MAC config
and this number is limited up to the MTL_MAX_{RX|TX}_QUEUES defined
in the driver.
Ethtool per-queue statistic display will look like below, when users
start adding more counters.
Example - 1:
q0_tx_statA:
q0_tx_statB:
q0_tx_statC:
|
q0_tx_statX:
.
.
.
qMAX_tx_statA:
qMAX_tx_statB:
qMAX_tx_statC:
|
qMAX_tx_statX:
q0_rx_statA:
q0_rx_statB:
q0_rx_statC:
|
q0_rx_statX:
.
.
.
qMAX_rx_statA:
qMAX_rx_statB:
qMAX_rx_statC:
|
qMAX_rx_statX:
Example - 2: Ping test using the tx queue 3.
$ tc qdisc add dev enp0s30f4 root mqprio num_tc 2 map 1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 queues 3@0 1@3 hw 0
Statistic before ping:
---------------------
$ ethtool -S enp0s30f4
[ snip ]
q3_tx_pkt_n: 7916
q3_tx_irq_n: 316
[ snip ]
$ cat /proc/interrupts
[ snip ]
143: 0 0 0 316 0 0
0 0 IR-PCI-MSI 499719-edge enp0s30f4:tx-3
[ snip ]
$ ping -I enp0s30f4 192.168.1.10 -i 0.01 -c 100 > /dev/null
Statistic after ping:
---------------------
$ ethtool -S enp0s30f4
[ snip ]
q3_tx_pkt_n: 8016
q3_tx_irq_n: 320
[ snip ]
$ cat /proc/interrupts
[ snip ]
143: 0 0 0 320 0 0
0 0 IR-PCI-MSI 499719-edge enp0s30f4:tx-3
[ snip ]
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vijayakannan Ayyathurai [Mon, 16 Aug 2021 06:16:00 +0000 (14:16 +0800)]
net: stmmac: add ethtool per-queue irq statistic support
Adding ethtool per-queue statistics support to show number of interrupts
generated at DMA tx and DMA rx. All the counters are incremented at
dwmac4_dma_interrupt function.
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vijayakannan Ayyathurai [Mon, 16 Aug 2021 06:15:59 +0000 (14:15 +0800)]
net: stmmac: add ethtool per-queue statistic framework
Adding generic ethtool per-queue statistic framework to display the
statistics for each rx/tx queue. In future, users can avail it to add
more per-queue specific counters. Number of rx/tx queues displayed is
depending on the available rx/tx queues in that particular MAC config
and this number is limited up to the MTL_MAX_{RX|TX}_QUEUES defined
in the driver.
Ethtool per-queue statistic display will look like below, when users
start adding more counters.
Example:
q0_tx_statA:
q0_tx_statB:
q0_tx_statC:
|
q0_tx_statX:
.
.
.
qMAX_tx_statA:
qMAX_tx_statB:
qMAX_tx_statC:
|
qMAX_tx_statX:
q0_rx_statA:
q0_rx_statB:
q0_rx_statC:
|
q0_rx_statX:
.
.
.
qMAX_rx_statA:
qMAX_rx_statB:
qMAX_rx_statC:
|
qMAX_rx_statX:
In addition, this patch has the support on displaying the number of
packets received and transmitted per queue.
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Voon Weifeng [Mon, 16 Aug 2021 06:15:58 +0000 (14:15 +0800)]
net: stmmac: fix INTR TBU status affecting irq count statistic
DMA channel status "Transmit buffer unavailable(TBU)" bit is not
considered as a successful dma tx. Hence, it should not affect
all the irq count statistic.
Fixes:
1103d3a5531c ("net: stmmac: dwmac4: Also use TBU interrupt to clean TX path")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 15 Aug 2021 12:00:35 +0000 (15:00 +0300)]
net: dsa: sja1105: reorganize probe, remove, setup and teardown ordering
The sja1105 driver's initialization and teardown sequence is a chaotic
mess that has gathered a lot of cruft over time. It works because there
is no strict dependency between the functions, but it could be improved.
The basic principle that teardown should be the exact reverse of setup
is obviously not held. We have initialization steps (sja1105_tas_setup,
sja1105_flower_setup) in the probe method that are torn down in the DSA
.teardown method instead of driver unbind time.
We also have code after the dsa_register_switch() call, which implicitly
means after the .setup() method has finished, which is pretty unusual.
Also, sja1105_teardown() has calls set up in a different order than the
error path of sja1105_setup(): see the reversed ordering between
sja1105_ptp_clock_unregister and sja1105_mdiobus_unregister.
Also, sja1105_static_config_load() is called towards the end of
sja1105_setup(), but sja1105_static_config_free() is also towards the
end of the error path and teardown path. The static_config_load() call
should be earlier.
Also, making and breaking the connections between struct sja1105_port
and struct dsa_port could be refactored into dedicated functions, makes
the code easier to follow.
We move some code from the DSA .setup() method into the probe method,
like the device tree parsing, and we move some code from the probe
method into the DSA .setup() method to be symmetric with its placement
in the DSA .teardown() method, which is nice because the unbind function
has a single call to dsa_unregister_switch(). Example of the latter type
of code movement are the connections between ports mentioned above, they
are now in the .setup() method.
Finally, due to fact that the kthread_init_worker() call is no longer
in sja1105_probe() - located towards the bottom of the file - but in
sja1105_setup() - located much higher - there is an inverse ordering
with the worker function declaration, sja1105_port_deferred_xmit. To
avoid that, the entire sja1105_setup() and sja1105_teardown() functions
are moved towards the bottom of the file.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 15 Aug 2021 08:26:18 +0000 (10:26 +0200)]
r8169: rename rtl_csi_access_enable to rtl_set_aspm_entry_latency
Rename the function to reflect what it's doing. Also add a description
of the register values as kindly provided by Realtek.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Aug 2021 10:19:34 +0000 (11:19 +0100)]
Merge branch 'ocelot-phylink'
Vladimir Oltean says:
====================
Convert ocelot to phylink
The ocelot switchdev and felix dsa drivers are interesting because they
target the same class of hardware switches but used in different modes.
Colin has an interesting use case where he wants to use a hardware
switch supported by the ocelot switchdev driver with the felix dsa
driver.
So far, the existing hardware revisions were similar between the ocelot
and felix drivers, but not completely identical. With identical hardware,
it is absurd that the felix driver uses phylink while the ocelot driver
uses phylib - this should not be one of the differences between the
switchdev and dsa driver, and we could eliminate it.
Colin will need the common phylink support in ocelot and felix when
adding a phylink_pcs driver for the PCS1G block inside VSC7514, which
will make the felix driver work with either the NXP or the Microchip PCS.
As usual, Alex, Horatiu, sorry for bugging you, but it would be
appreciated if you could give this a quick run on actual VSC7514
hardware (which I don't have) to make sure I'm not introducing any
breakage.
====================
Fixes:
0f06a6787e05 ("samples: Add an IPv6 "-6" option to the pktgen scripts")
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 15 Aug 2021 01:47:48 +0000 (04:47 +0300)]
net: mscc: ocelot: convert to phylink
The felix DSA driver, which is a wrapper over the same hardware class as
ocelot, is integrated with phylink, but ocelot is using the plain PHY
library. It makes sense to bring together the two implementations, which
is what this patch achieves.
This is a large patch and hard to break up, but it does the following:
The existing ocelot_adjust_link writes some registers, and
felix_phylink_mac_link_up writes some registers, some of them are
common, but both functions write to some registers to which the other
doesn't.
The main reasons for this are:
- Felix switches so far have used an NXP PCS so they had no need to
write the PCS1G registers that ocelot_adjust_link writes
- Felix switches have the MAC fixed at 1G, so some of the MAC speed
changes actually break the link and must be avoided.
The naming conventions for the functions introduced in this patch are:
- vsc7514_phylink_{mac_config,validate} are specific to the Ocelot
instantiations and placed in ocelot_net.c which is built only for the
ocelot switchdev driver.
- ocelot_phylink_mac_link_{up,down} are shared between the ocelot
switchdev driver and the felix DSA driver (they are put in the common
lib).
One by one, the registers written by ocelot_adjust_link are:
DEV_MAC_MODE_CFG - felix_phylink_mac_link_up had no need to write this
register since its out-of-reset value was fine and
did not need changing. The write is moved to the
common ocelot_phylink_mac_link_up and on felix it is
guarded by a quirk bit that makes the written value
identical with the out-of-reset one
DEV_PORT_MISC - runtime invariant, was moved to vsc7514_phylink_mac_config
PCS1G_MODE_CFG - same as above
PCS1G_SD_CFG - same as above
PCS1G_CFG - same as above
PCS1G_ANEG_CFG - same as above
PCS1G_LB_CFG - same as above
DEV_MAC_ENA_CFG - both ocelot_adjust_link and ocelot_port_disable
touched this. felix_phylink_mac_link_{up,down} also
do. We go with what felix does and put it in
ocelot_phylink_mac_link_up.
DEV_CLOCK_CFG - ocelot_adjust_link and felix_phylink_mac_link_up both
write this, but to different values. Move to the common
ocelot_phylink_mac_link_up and make sure via the quirk
that the old values are preserved for both.
ANA_PFC_PFC_CFG - ocelot_adjust_link wrote this, felix_phylink_mac_link_up
did not. Runtime invariant, speed does not matter since
PFC is disabled via the RX_PFC_ENA bits which are cleared.
Move to vsc7514_phylink_mac_config.
QSYS_SWITCH_PORT_MODE_PORT_ENA - both ocelot_adjust_link and
felix_phylink_mac_link_{up,down} wrote
this. Ocelot also wrote this register
from ocelot_port_disable. Keep what
felix did, move in ocelot_phylink_mac_link_{up,down}
and delete ocelot_port_disable.
ANA_POL_FLOWC - same as above
SYS_MAC_FC_CFG - same as above, except slight behavior change. Whereas
ocelot always enabled RX and TX flow control, felix
listened to phylink (for the most part, at least - see
the 2500base-X comment).
The registers which only felix_phylink_mac_link_up wrote are:
SYS_PAUSE_CFG_PAUSE_ENA - this is why I am not sure that flow control
worked on ocelot. Not it should, since the
code is shared with felix where it does.
ANA_PORT_PORT_CFG - this is a Frame Analyzer block register, phylink
should be the one touching them, deleted.
Other changes:
- The old phylib registration code was in mscc_ocelot_init_ports. It is
hard to work with 2 levels of indentation already in, and with hard to
follow teardown logic. The new phylink registration code was moved
inside ocelot_probe_port(), right between alloc_etherdev() and
register_netdev(). It could not be done before (=> outside of)
ocelot_probe_port() because ocelot_probe_port() allocates the struct
ocelot_port which we then use to assign ocelot_port->phy_mode to. It
is more preferable to me to have all PHY handling logic inside the
same function.
- On the same topic: struct ocelot_port_private :: serdes is only used
in ocelot_port_open to set the SERDES protocol to Ethernet. This is
logically a runtime invariant and can be done just once, when the port
registers with phylink. We therefore don't even need to keep the
serdes reference inside struct ocelot_port_private, or to use the devm
variant of of_phy_get().
- Phylink needs a valid phy-mode for phylink_create() to succeed, and
the existing device tree bindings in arch/mips/boot/dts/mscc/ocelot_pcb120.dts
don't define one for the internal PHY ports. So we patch
PHY_INTERFACE_MODE_NA into PHY_INTERFACE_MODE_INTERNAL.
- There was a strategically placed:
switch (priv->phy_mode) {
case PHY_INTERFACE_MODE_NA:
continue;
which made the code skip the serdes initialization for the internal
PHY ports. Frankly that is not all that obvious, so now we explicitly
initialize the serdes under an "if" condition and not rely on code
jumps, so everything is clearer.
- There was a write of OCELOT_SPEED_1000 to DEV_CLOCK_CFG for QSGMII
ports. Since that is in fact the default value for the register field
DEV_CLOCK_CFG_LINK_SPEED, I can only guess the intention was to clear
the adjacent fields, MAC_TX_RST and MAC_RX_RST, aka take the port out
of reset, which does match the comment. I don't even want to know why
this code is placed there, but if there is indeed an issue that all
ports that share a QSGMII lane must all be up, then this logic is
already buggy, since mscc_ocelot_init_ports iterates using
for_each_available_child_of_node, so nobody prevents the user from
putting a 'status = "disabled";' for some QSGMII ports which would
break the driver's assumption.
In any case, in the eventuality that I'm right, we would have yet
another issue if ocelot_phylink_mac_link_down would reset those ports
and that would be forbidden, so since the ocelot_adjust_link logic did
not do that (maybe for a reason), add another quirk to preserve the
old logic.
The ocelot driver teardown goes through all ports in one fell swoop.
When initialization of one port fails, the ocelot->ports[port] pointer
for that is reset to NULL, and teardown is done only for non-NULL ports,
so there is no reason to do partial teardowns, let the central
mscc_ocelot_release_ports() do its job.
Tested bind, unbind, rebind, link up, link down, speed change on mock-up
hardware (modified the driver to probe on Felix VSC9959). Also
regression tested the felix DSA driver. Could not test the Ocelot
specific bits (PCS1G, SERDES, device tree bindings).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 15 Aug 2021 01:47:47 +0000 (04:47 +0300)]
net: dsa: felix: stop calling ocelot_port_{enable,disable}
ocelot_port_enable touches ANA_PORT_PORT_CFG, which has the following
fields:
- LOCKED_PORTMOVE_CPU, LEARNDROP, LEARNCPU, LEARNAUTO, RECV_ENA, all of
which are written with their hardware default values, also runtime
invariants. So it makes no sense to write these during every .ndo_open.
- PORTID_VAL: this field has an out-of-reset value of zero for all ports
and must be initialized by software. Additionally, the
ocelot_setup_logical_port_ids() code path sets up different logical
port IDs for the ports in a hardware LAG, and we absolutely don't want
.ndo_open to interfere there and reset those values.
So in fact the write from ocelot_port_enable can better be moved to
ocelot_init_port, and the .ndo_open hook deleted.
ocelot_port_disable touches DEV_MAC_ENA_CFG and QSYS_SWITCH_PORT_MODE_PORT_ENA,
in an attempt to undo what ocelot_adjust_link did. But since .ndo_stop
does not get called each time the link falls (i.e. this isn't a
substitute for .phylink_mac_link_down), felix already does better at
this by writing those registers already in felix_phylink_mac_link_down.
So keep ocelot_port_disable (for now, until ocelot is converted to
phylink too), and just delete the felix call to it, which is not
necessary.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changbin Du [Sat, 14 Aug 2021 01:03:34 +0000 (09:03 +0800)]
s390/net: replace in_irq() with in_hardirq()
Replace the obsolete and ambiguos macro in_irq() with new
macro in_hardirq().
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 13 Aug 2021 23:04:22 +0000 (02:04 +0300)]
net: dsa: tag_8021q: fix notifiers broadcast when they shouldn't, and vice versa
During the development of the blamed patch, the "bool broadcast"
argument of dsa_port_tag_8021q_vlan_{add,del} was originally called
"bool local", and the meaning was the exact opposite.
Due to a rookie mistake where the patch was modified at the last minute
without retesting, the instances of dsa_port_tag_8021q_vlan_{add,del}
are called with the wrong values. During setup and teardown, cross-chip
notifiers should not be broadcast to all DSA trees, while during
bridging, they should.
Fixes:
724395f4dc95 ("net: dsa: tag_8021q: don't broadcast during setup/teardown")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 13 Aug 2021 20:30:26 +0000 (13:30 -0700)]
ptp: ocp: don't allow on S390
Fix kconfig warning on arch/s390/:
WARNING: unmet direct dependencies detected for SERIAL_8250
Depends on [n]: TTY [=y] && HAS_IOMEM [=y] && !S390 [=y]
Selected by [m]:
- PTP_1588_CLOCK_OCP [=m] && PTP_1588_CLOCK [=m] && HAS_IOMEM [=y] && PCI [=y] && SPI [=y] && I2C [=m] && MTD [=m]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rao Shoaib [Fri, 13 Aug 2021 18:19:34 +0000 (11:19 -0700)]
af_unix: check socket state when queuing OOB
edumazet@google.com pointed out that queue_oob
does not check socket state after acquiring
the lock. He also pointed to an incorrect usage
of kfree_skb and an unnecessary setting of skb
length. This patch addresses those issue.
Signed-off-by: Rao Shoaib <Rao.Shoaib@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Song Yoong Siang [Fri, 13 Aug 2021 08:45:08 +0000 (16:45 +0800)]
net: phy: marvell: Add WAKE_PHY support to WOL event
Add Wake-on-PHY feature support by enabling the Link Up Event.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wong Vee Khee [Fri, 13 Aug 2021 02:11:29 +0000 (10:11 +0800)]
net: pcs: xpcs: Add Pause Mode support for SGMII and 2500BaseX
SGMII/2500BaseX supports Pause frame as defined in the IEEE802.3x
Flow Control standardization.
Add this as a supported feature under the xpcs_sgmii_features struct.
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Aug 2021 10:02:09 +0000 (11:02 +0100)]
Merge branch 'pktgen-samples'
samples: pktgen: enhance the usability of pktgen samples
This patchset improves the usability of pktgen samples by adding an option for
propagating the environment variable of normal user to sudo. And also adds the
missing IPv6 option to pktgen scripts.
Currently, all pktgen samples are able to use the environment variable instead
of optional parameters. However, it doesn't work appropriately when running
samples as normal user.
This is results of running sample as root and user:
// running as root
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -v -n 1
Running... ctrl^C to stop
// running as normal user
$ DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -v -n 1
[...]
ERROR: Please specify output device
The reason why passing the environment varaible doesn't work properly when
running samples as normal user is that the environment variable of normal user
doesn't propagate to sudo (root_check_run_with_sudo)). So the first commit
solves this issue by using "-E" (--preserve-env) option of "sudo", which passes
normal user's existing environment variables.
Also, "sample04" and "sample05" are not working properly when running with IPv6
option parameter("-6"). Because the commit
0f06a6787e05 ("samples: Add an IPv6
"-6" option to the pktgen scripts") has omitted the addition of this option at
these samples. So the second commit adds missing IPv6 option to pktgen scripts.
====================
Fixes:
0f06a6787e05 ("samples: Add an IPv6 "-6" option to the pktgen scripts")
Signed-off-by: David S. Miller <davem@davemloft.net>
Juhee Kang [Thu, 12 Aug 2021 15:08:13 +0000 (00:08 +0900)]
samples: pktgen: add missing IPv6 option to pktgen scripts
Currently, "sample04" and "sample05" are not working properly when
running with an IPv6 option("-6"). The commit
0f06a6787e05 ("samples:
Add an IPv6 "-6" option to the pktgen scripts") has omitted the addition
of this option at "sample04" and "sample05".
In order to support IPv6 option, this commit adds logic related to IPv6
option.
Fixes:
0f06a6787e05 ("samples: Add an IPv6 "-6" option to the pktgen scripts")
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Juhee Kang [Thu, 12 Aug 2021 15:08:12 +0000 (00:08 +0900)]
samples: pktgen: pass the environment variable of normal user to sudo
All pktgen samples can use the environment variable instead of option
parameters(eg. $DEV is able to use instead of '-i' option).
This is results of running sample as root and user:
// running as root
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -v -n 1
Running... ctrl^C to stop
// running as normal user
$ DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -v -n 1
[...]
ERROR: Please specify output device
This results show the sample doesn't work properly when the sample runs
as normal user. Because the sample is restarted by the function
(root_check_run_with_sudo) to run with sudo. In this process, the
environment variable of normal user doesn't propagate to sudo.
It can be solved by using "-E"(--preserve-env) option of "sudo", which
preserve normal user's existing environment variables. So this commit
adds "-E" option in the function (root_check_run_with_sudo).
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Aug 2021 09:30:27 +0000 (10:30 +0100)]
Merge branch 'ipq-mdio'
Luo Jie says:
====================
net: mdio: Add IPQ MDIO reset related function
This patch series add the MDIO reset features, which includes
configuring MDIO clock source frequency and indicating CMN_PLL that
ethernet LDO has been ready, this ethernet LDO is dedicated in the
IPQ5018 platform.
Specify more chipset IPQ40xx, IPQ807x, IPQ60xx and IPQ50xx supported by
this MDIO driver.
Changes in v3:
* simplify the function ipq_mdio_reset.
Changes in v2:
* Addressed review comments (Andrew Lunn).
* Remove the IS_ERR().
* make binding patch part of series.
* document the property 'reg' and 'clock'.
Changes in v1:
* make MDIO_IPQ4019 unchanged for backwards compatibility.
* remove the PHY reset functions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Luo Jie [Thu, 12 Aug 2021 10:06:42 +0000 (18:06 +0800)]
dt-bindings: net: Add the properties for ipq4019 MDIO
The new added properties resource "reg" is for configuring
ethernet LDO in the IPQ5018 chipset, the property "clocks"
is for configuring the MDIO clock source frequency.
Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luo Jie [Thu, 12 Aug 2021 10:06:41 +0000 (18:06 +0800)]
MDIO: Kconfig: Specify more IPQ chipset supported
The IPQ MDIO driver currently supports the chipset IPQ40xx, IPQ807x,
IPQ60xx and IPQ50xx.
Add the compatible 'qcom,ipq5018-mdio' because of ethernet LDO dedicated
to the IPQ5018 platform.
Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luo Jie [Thu, 12 Aug 2021 10:06:40 +0000 (18:06 +0800)]
net: mdio: Add the reset function for IPQ MDIO driver
1. configure the MDIO clock source frequency.
2. the LDO resource is needed to configure the ethernet LDO available
for CMN_PLL.
Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Fri, 13 Aug 2021 12:08:03 +0000 (20:08 +0800)]
MAINTAINERS: Remove the ipx network layer info
commit <
47595e32869f> ("<MAINTAINERS: Mark some staging directories>")
indicated the ipx network layer as obsolete in Jan 2018,
updated in the MAINTAINERS file.
now, after being exposed for 3 years to refactoring, so to
remove the ipx network layer info from MAINTAINERS.
additionally, there is no module that depends on ipx.h
except a broken staging driver(r8188eu)
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Fri, 13 Aug 2021 12:08:02 +0000 (20:08 +0800)]
net: Remove net/ipx.h and uapi/linux/ipx.h header files
commit <
47595e32869f> ("<MAINTAINERS: Mark some staging directories>")
indicated the ipx network layer as obsolete in Jan 2018,
updated in the MAINTAINERS file
now, after being exposed for 3 years to refactoring, so to
delete uapi/linux/ipx.h and net/ipx.h header files for good.
additionally, there is no module that depends on ipx.h except
a broken staging driver(r8188eu)
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 14 Aug 2021 13:13:39 +0000 (14:13 +0100)]
Merge branch 'iupa-last-things-before-pm-conversion'
Alex Elder says:
====================
net: ipa: last things before PM conversion
This series contains a few remaining changes needed before fully
switching over to using runtime power management rather than the
previous "IPA clock" mechanism.
The first patch moves the calls to enable and disable the IPA
interrupt as a system wakeup interrupt into "ipa_clock.c" with the
rest of the power-related code.
The second adds a flag to make it possible to distinguish runtime
suspend from system suspend.
The third and fourth patches arrange for the ->start_xmit path to
resume hardware if necessary, to ensure it is powered. If power is
not active, the TX queue is stopped, and arrangements are made for
the queue to be restarted once hardware power is active again.
The fifth patch keeps the TX queue active during suspend. This
isn't necessary for system suspend but it's important for runtime
suspend.
And the last patch makes it so we don't hold the hardware active
while the modem network device is open.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 12 Aug 2021 19:50:35 +0000 (14:50 -0500)]
net: ipa: don't hold clock reference while netdev open
Currently a clock reference is taken whenever the ->ndo_open
callback for the modem netdev is called. That reference is dropped
when the device is closed, in ipa_stop().
We no longer need this, because ipa_start_xmit() now handles the
situation where the hardware power state is not active.
Drop the clock reference in ipa_open() when we're done, and take a
new reference in ipa_stop() before we begin closing the interface.
Finally (and unrelated, but trivial), change the return type of
ipa_start_xmit() to be netdev_tx_t instead of int.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 12 Aug 2021 19:50:34 +0000 (14:50 -0500)]
net: ipa: don't stop TX on suspend
Currently we stop the modem netdev transmit queue when suspending
the hardware. For system suspend this ensured we'd never attempt
to transmit while attempting to suspend the modem endpoints.
For runtime suspend, the IPA hardware might get suspended while the
system is operating. In that case we want an attempt to transmit a
packet to cause the hardware to resume if necessary. But if we
disable the queue this cannot happen.
So stop disabling the queue on suspend. In case we end up disabling
it in ipa_start_xmit() (see the previous commit), we still arrange
to start the TX queue on resume.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 12 Aug 2021 19:50:33 +0000 (14:50 -0500)]
net: ipa: ensure hardware has power in ipa_start_xmit()
We need to ensure the hardware is powered when we transmit a packet.
But if it's not, we can't block to wait for it. So asynchronously
request power in ipa_start_xmit(), and only proceed if the return
value indicates the power state is active.
If the hardware is not active, a runtime resume request will have
been initiated. In that case, stop the network stack from further
transmit attempts until the resume completes. Return NETDEV_TX_BUSY,
to retry sending the packet once the queue is restarted.
If the power request returns an error (other than -EINPROGRESS,
which just means a resume requested elsewhere isn't complete), just
drop the packet.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 12 Aug 2021 19:50:32 +0000 (14:50 -0500)]
net: ipa: re-enable transmit in PM WQ context
Create a new work structure in the modem private data, and use it to
re-enable the modem network device transmit queue when resuming.
This is needed by the next patch, which stops the TX queue if IPA
power isn't active when a transmit request arrives. Packets will
start arriving the instant the TX queue is enabled, but resuming
isn't complete until ipa_modem_resume() returns. This way we're
sure to be resumed before transmits are allowed again.
Cancel it before calling ipa_stop() in ipa_modem_stop() to ensure
the transmit queue restart completes before it gets stopped there.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 12 Aug 2021 19:50:31 +0000 (14:50 -0500)]
net: ipa: distinguish system from runtime suspend
Add a new flag that is set when the hardware is suspended due to a
system suspend operation, distingishing it from runtime suspend.
Use it in the SUSPEND IPA interrupt handler to determine whether to
trigger a system resume because of the event. Define new suspend
and resume power management callback functions to set and clear the
new flag, respectively.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 12 Aug 2021 19:50:30 +0000 (14:50 -0500)]
net: ipa: enable wakeup in ipa_power_setup()
Move the call to enable the IPA interrupt as a wakeup interrupt into
ipa_power_setup(), disable it in ipa_power_teardown().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 14 Aug 2021 13:02:43 +0000 (14:02 +0100)]
Merge branch 'bridgge-mcast'
Nikolay Aleksandrov says:
====================
net: bridge: mcast: dump querier state
This set adds the ability to dump the current multicast querier state.
This is extremely useful when debugging multicast issues, we've had
many cases of unexpected queriers causing strange behaviour and mcast
test failures. The first patch changes the querier struct to record
a port device's ifindex instead of a pointer to the port itself so we
can later retrieve it, I chose this way because it's much simpler
and doesn't require us to do querier port ref counting, it is best
effort anyway. Then patch 02 makes the querier address/port updates
consistent via a combination of multicast_lock and seqcount, so readers
can only use seqcount to get a consistent snapshot of address and port.
Patch 03 is a minor cleanup in preparation for the dump support, it
consolidates IPv4 and IPv6 querier selection paths as they share most of
the logic (except address comparisons of course). Finally the last three
patches add the new querier state dumping support, for the bridge's
global multicast context we embed the BRIDGE_QUERIER_xxx attributes
into IFLA_BR_MCAST_QUERIER_STATE and for the per-vlan global mcast
contexts we embed them into BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE.
The structure is:
[IFLA_BR_MCAST_QUERIER_STATE / BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE]
`[BRIDGE_QUERIER_IP_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IP_PORT] - bridge port ifindex where the querier was
seen (set only if external querier)
`[BRIDGE_QUERIER_IP_OTHER_TIMER] - other querier timeout
`[BRIDGE_QUERIER_IPV6_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IPV6_PORT] - bridge port ifindex where the querier
was seen (set only if external querier)
`[BRIDGE_QUERIER_IPV6_OTHER_TIMER] - other querier timeout
Later we can also add IGMP version of seen queriers and last seen values
from the queries.
====================
Nikolay Aleksandrov [Fri, 13 Aug 2021 15:00:02 +0000 (18:00 +0300)]
net: bridge: vlan: dump mcast ctx querier state
Use the new mcast querier state dump infrastructure and export vlans'
mcast context querier state embedded in attribute
BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 13 Aug 2021 15:00:01 +0000 (18:00 +0300)]
net: bridge: mcast: dump ipv6 querier state
Add support for dumping global IPv6 querier state, we dump the state
only if our own querier is enabled or there has been another external
querier which has won the election. For the bridge global state we use
a new attribute IFLA_BR_MCAST_QUERIER_STATE and embed the state inside.
The structure is:
[IFLA_BR_MCAST_QUERIER_STATE]
`[BRIDGE_QUERIER_IPV6_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IPV6_PORT] - bridge port ifindex where the querier
was seen (set only if external querier)
`[BRIDGE_QUERIER_IPV6_OTHER_TIMER] - other querier timeout
IPv4 and IPv6 attributes are embedded at the same level of
IFLA_BR_MCAST_QUERIER_STATE. If we didn't dump anything we cancel the nest
and return.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 13 Aug 2021 15:00:00 +0000 (18:00 +0300)]
net: bridge: mcast: dump ipv4 querier state
Add support for dumping global IPv4 querier state, we dump the state
only if our own querier is enabled or there has been another external
querier which has won the election. For the bridge global state we use
a new attribute IFLA_BR_MCAST_QUERIER_STATE and embed the state inside.
The structure is:
[IFLA_BR_MCAST_QUERIER_STATE]
`[BRIDGE_QUERIER_IP_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IP_PORT] - bridge port ifindex where the querier was
seen (set only if external querier)
`[BRIDGE_QUERIER_IP_OTHER_TIMER] - other querier timeout
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 13 Aug 2021 14:59:59 +0000 (17:59 +0300)]
net: bridge: mcast: consolidate querier selection for ipv4 and ipv6
We can consolidate both functions as they share almost the same logic.
This is easier to maintain and we have a single querier update function.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 13 Aug 2021 14:59:58 +0000 (17:59 +0300)]
net: bridge: mcast: make sure querier port/address updates are consistent
Use a sequence counter to make sure port/address updates can be read
consistently without requiring the bridge multicast_lock. We need to
zero out the port and address when the other querier has expired and
we're about to select ourselves as querier. br_multicast_read_querier
will be used later when dumping querier state. Updates are done only
with the multicast spinlock and softirqs disabled, while reads are done
from process context and from softirqs (due to notifications).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 13 Aug 2021 14:59:57 +0000 (17:59 +0300)]
net: bridge: mcast: record querier port device ifindex instead of pointer
Currently when a querier port is detected its net_bridge_port pointer is
recorded, but it's used only for comparisons so it's fine to have stale
pointer, in order to dereference and use the port pointer a proper
accounting of its usage must be implemented adding unnecessary
complexity. To solve the problem we can just store the netdevice ifindex
instead of the port pointer and retrieve the bridge port. It is a best
effort and the device needs to be validated that is still part of that
bridge before use, but that is small price to pay for avoiding querier
reference counting for each port/vlan.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 14 Aug 2021 12:59:10 +0000 (13:59 +0100)]
Merge branch 'devlink-cleanup-for-delay-event'
Leon Romanovsky says:
====================
Devlink cleanup for delay event series
Jakub's request to make sure that devlink events are delayed and not
printed till they fully accessible [1] requires us to implement delayed
event notification system in the devlink.
In order to do it, I moved some of my patches (xarray e.t.c) from the future
series to be before "Move devlink_register to be near devlink_reload_enable" [2].
That allows us to rely on DEVLINK_REGISTERED xarray mark to decide if to print
event or not.
Other patches are simple cleanup which is needed anyway.
[1] https://lore.kernel.org/lkml/
20210811071817.
4af5ab34@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com
[2] https://lore.kernel.org/lkml/cover.
1628599239.git.leonro@nvidia.com
Next in the queue:
* Delay event series
* Move devlink_register to be near devlink_reload_enable"
* Extension of devlink_ops to be set dynamically
* devlink_reload_* delete
* Devlink locks rework to user xarray and reference counting
* ????
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Sat, 14 Aug 2021 09:57:31 +0000 (12:57 +0300)]
net: hns3: remove always exist devlink pointer check
The devlink pointer always exists after hclge_devlink_init() succeed.
Remove that check together with NULL setting after release and ensure
that devlink_register is last command prior to call to devlink_reload_enable().
Fixes:
b741269b2759 ("net: hns3: add support for registering devlink for PF")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Sat, 14 Aug 2021 09:57:30 +0000 (12:57 +0300)]
devlink: Clear whole devlink_flash_notify struct
The { 0 } doesn't clear all fields in the struct, but tells to the
compiler to set all fields to zero and doesn't touch any sub-fields
if they exists.
The {} is an empty initialiser that instructs to fully initialize whole
struct including sub-fields, which is error-prone for future
devlink_flash_notify extensions.
Fixes:
6700acc5f1fe ("devlink: collect flash notify params into a struct")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Sat, 14 Aug 2021 09:57:29 +0000 (12:57 +0300)]
devlink: Use xarray to store devlink instances
We can use xarray instead of linearly organized linked lists for the
devlink instances. This will let us revise the locking scheme in favour
of internal xarray locking that protects database.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Sat, 14 Aug 2021 09:57:28 +0000 (12:57 +0300)]
devlink: Count struct devlink consumers
The struct devlink itself is protected by internal lock and doesn't
need global lock during operation. That global lock is used to protect
addition/removal new devlink instances from the global list in use by
all devlink consumers in the system.
The future conversion of linked list to be xarray will allow us to
actually delete that lock, but first we need to count all struct devlink
users.
The reference counting provides us a way to ensure that no new user
space commands success to grab devlink instance which is going to be
destroyed makes it is safe to access it without lock.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Sat, 14 Aug 2021 09:57:27 +0000 (12:57 +0300)]
devlink: Remove check of always valid devlink pointer
Devlink objects are accessible only after they were registered and
have valid devlink_*->devlink pointers.
Remove that check and simplify respective fill functions as an outcome
of such change.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Sat, 14 Aug 2021 09:57:26 +0000 (12:57 +0300)]
devlink: Simplify devlink_pernet_pre_exit call
The devlink_pernet_pre_exit() will be called if net namespace exits.
That routine is relevant for devlink instances that were assigned to
that namespaces first. This assignment is possible only with the following
command: "devlink reload DEV netns ...", which already checks reload support.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 14 Aug 2021 10:37:25 +0000 (11:37 +0100)]
Merge branch 'mptcp-improve-backup-subflows'
Mat Martineau says:
====================
mptcp: Improve use of backup subflows
Multipath TCP combines multiple TCP subflows in to one stream, and the
MPTCP-level socket must decide which subflow to use when sending (or
resending) chunks of data. The choice of the "best" subflow to transmit
on can vary depending on the priority (normal or backup) for each
subflow and how well the subflow is performing.
In order to improve MPTCP performance when some subflows are failing,
this patch set changes how backup subflows are utilized and introduces
tracking of "stale" subflows that are still connected but not making
progress.
Patch 1 adjusts MPTCP-level retransmit timeouts to use data from all
subflows.
Patch 2 makes MPTCP-level retransmissions less aggressive to avoid
resending data that's still queued at the TCP level.
Patch 3 changes the way pending data is handled when subflows are
closed. Unacked MPTCP-level data still in the subflow tx queue is
immediately moved to another subflow for transmission instead of waiting
for MPTCP-level timeouts to trigger retransmission.
Patch 4 has some sysctl code cleanup.
Patches 5 and 6 add tracking of "stale" subflows, so only underlying TCP
subflow connections that appear to be making progress are considered
when selecting a subflow to (re)transmit data. How fast a subflow goes
stale is configurable with a per-namespace sysctl. Related MIBS are
added too.
Patch 7 makes sure the backup flag is always correctly recorded when the
MP_JOIN SYN/ACK is received for an added subflow.
Patch 8 adds more test cases for backup subflows and stale subflows.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 13 Aug 2021 22:15:48 +0000 (15:15 -0700)]
selftests: mptcp: add testcase for active-back
Add more test-case for link failures scenario,
including recovery from link failure using only
backup subflows and bi-directional transfer.
Additionally explicitly check for stale count
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 13 Aug 2021 22:15:47 +0000 (15:15 -0700)]
mptcp: backup flag from incoming MPJ ack option
the parsed incoming backup flag is not propagated
to the subflow itself, the client may end-up using it
to send data.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/191
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 13 Aug 2021 22:15:46 +0000 (15:15 -0700)]
mptcp: add mibs for stale subflows processing
This allows monitoring exceptional events like
active backup scenarios.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 13 Aug 2021 22:15:45 +0000 (15:15 -0700)]
mptcp: faster active backup recovery
The msk can use backup subflows to transmit in-sequence data
only if there are no other active subflow. On active backup
scenario, the MPTCP connection can do forward progress only
due to MPTCP retransmissions - rtx can pick backup subflows.
This patch introduces a new flag flow MPTCP subflows: if the
underlying TCP connection made no progresses for long time,
and there are other less problematic subflows available, the
given subflow become stale.
Stale subflows are not considered active: if all non backup
subflows become stale, the MPTCP scheduler can pick backup
subflows for plain transmissions.
Stale subflows can return in active state, as soon as any reply
from the peer is observed.
Active backup scenarios can now leverage the available b/w
with no restrinction.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 13 Aug 2021 22:15:44 +0000 (15:15 -0700)]
mptcp: cleanup sysctl data and helpers
Reorder the data in mptcp_pernet to avoid wasting space
with no reasons and constify the access helpers.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 13 Aug 2021 22:15:43 +0000 (15:15 -0700)]
mptcp: handle pending data on closed subflow
The PM can close active subflow, e.g. due to ingress RM_ADDR
option. Such subflow could carry data still unacked at the
MPTCP-level, both in the write and the rtx_queue, which has
never reached the other peer.
Currently the mptcp-level retransmission will deliver such data,
but at a very low rate (at most 1 DSM for each MPTCP rtx interval).
We can speed-up the recovery a lot, moving all the unacked in the
tcp write_queue, so that it will be pushed again via other
subflows, at the speed allowed by them.
Also make available the new helper for later patches.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 13 Aug 2021 22:15:42 +0000 (15:15 -0700)]
mptcp: less aggressive retransmission strategy
The current mptcp re-inject strategy is very aggressive,
we have mptcp-level retransmissions even on single subflow
connection, if the link in-use is lossy.
Let's be a little more conservative: we do retransmit
only if at least a subflow has write and rtx queue empty.
Additionally use the backup subflows only if the active
subflows are stale - no progresses in at least an rtx period
and ignore stale subflows for rtx timeout update
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 13 Aug 2021 22:15:41 +0000 (15:15 -0700)]
mptcp: more accurate timeout
As reported by Maxim, we have a lot of MPTCP-level
retransmissions when multilple links with different latencies
are in use.
This patch refactor the mptcp-level timeout accounting so that
the maximum of all the active subflow timeout is used. To avoid
traversing the subflow list multiple times, the update is
performed inside the packet scheduler.
Additionally clean-up a bit timeout handling.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 12 Aug 2021 18:33:58 +0000 (20:33 +0200)]
ethernet: fix PTP_1588_CLOCK dependencies
The 'imply' keyword does not do what most people think it does, it only
politely asks Kconfig to turn on another symbol, but does not prevent
it from being disabled manually or built as a loadable module when the
user is built-in. In the ICE driver, the latter now causes a link failure:
aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl':
ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config'
ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config'
aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config'
ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config'
aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset':
ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release'
ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release'
aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild':
This is a recurring problem in many drivers, and we have discussed
it several times befores, without reaching a consensus. I'm providing
a link to the previous email thread for reference, which discusses
some related problems.
To solve the dependency issue better than the 'imply' keyword, introduce a
separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver
can depend on if it is able to use PTP support when available, but works
fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are
then prevented from being built-in, the same way as with a 'depends on
PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick,
but that can be rather confusing when you first see it.
Since this should cover the dependencies correctly, the IS_REACHABLE()
hack in the header is no longer needed now, and can be turned back
into a normal IS_ENABLED() check. Any driver that gets the dependency
wrong will now cause a link time failure rather than being unable to use
PTP support when that is in a loadable module.
However, the two recently added ptp_get_vclocks_index() and
ptp_convert_timestamp() interfaces are only called from builtin code with
ethtool and socket timestamps, so keep the current behavior by stubbing
those out completely when PTP is in a loadable module. This should be
addressed properly in a follow-up.
As Richard suggested, we may want to actually turn PTP support into a
'bool' option later on, preventing it from being a loadable module
altogether, which would be one way to solve the problem with the ethtool
interface.
Fixes:
06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices")
Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/
Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/
Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/
Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/
Acked-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Bornyakov [Thu, 12 Aug 2021 13:42:56 +0000 (16:42 +0300)]
net: phy: marvell: add SFP support for
88E1510
Add support for SFP cages connected to the Marvell
88E1512 transceiver.
88E1512 supports for SGMII/1000Base-X/100Base-FX media type with RGMII
on system interface. Configure PHY to appropriate mode depending on the
type of SFP inserted. On SFP removal configure PHY to the RGMII-copper
mode so RJ-45 port can still work.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Link: https://lore.kernel.org/r/20210812134256.2436-1-i.bornyakov@metrotek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 13 Aug 2021 23:30:37 +0000 (16:30 -0700)]
Merge branch 'kconfig-symbol-clean-up-on-net'
Lukas Bulwahn says:
====================
Kconfig symbol clean-up on net
The script ./scripts/checkkconfigsymbols.py warns on invalid references to
Kconfig symbols (often, minor typos, name confusions or outdated references).
This patch series addresses all issues reported by
./scripts/checkkconfigsymbols.py in ./net/ and ./drivers/net/ for Kconfig
and Makefile files. Issues in the Kconfig and Makefile files indicate some
shortcomings in the overall build definitions, and often are true actionable
issues to address.
These issues can be identified and filtered by:
./scripts/checkkconfigsymbols.py \
| grep -E "(drivers/)?net/.*(Kconfig|Makefile)" -B 1 -A 1
After applying this patch series on linux-next (next-
20210811), the command
above yields no further issues to address.
====================
Link: https://lore.kernel.org/r/20210812083806.28434-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Bulwahn [Thu, 12 Aug 2021 08:38:06 +0000 (10:38 +0200)]
net: dpaa_eth: remove dead select in menuconfig FSL_DPAA_ETH
The menuconfig FSL_DPAA_ETH selects config FSL_FMAN_MAC, but the config
FSL_FMAN_MAC never existed in the kernel tree.
Hence, ./scripts/checkkconfigsymbols.py warns:
FSL_FMAN_MAC
Referencing files: drivers/net/ethernet/freescale/dpaa/Kconfig
Remove this dead select in menuconfig FSL_DPAA_ETH.
Fixes:
9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Bulwahn [Thu, 12 Aug 2021 08:38:05 +0000 (10:38 +0200)]
net: 802: remove dead leftover after ipx driver removal
Commit
7a2e838d28cf ("staging: ipx: delete it from the tree") removes the
ipx driver and the config IPX. Since then, there is some dead leftover in
./net/802/, that was once used by the IPX driver, but has no other user.
Remove this dead leftover.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Bulwahn [Thu, 12 Aug 2021 08:38:04 +0000 (10:38 +0200)]
net: Kconfig: remove obsolete reference to config MICROBLAZE_64K_PAGES
Commit
05cdf457477d ("microblaze: Remove noMMU code") removes config
MICROBLAZE_64K_PAGES in arch/microblaze/Kconfig. However, there is still
a reference to MICROBLAZE_64K_PAGES in the config VMXNET3 in
./drivers/net/Kconfig.
Remove this obsolete reference to config MICROBLAZE_64K_PAGES.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hari Prasath [Thu, 12 Aug 2021 07:44:22 +0000 (13:14 +0530)]
dt-bindings: net: macb: add documentation for sama5d29 ethernet interface
Add documentation for SAMA5D29 ethernet interface.
Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com>
Link: https://lore.kernel.org/r/20210812074422.13487-2-Hari.PrasathGE@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hari Prasath [Thu, 12 Aug 2021 07:44:21 +0000 (13:14 +0530)]
net: macb: Add PTP support for SAMA5D29
Add PTP capability to the macb config object for sama5d29.
Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com>
Link: https://lore.kernel.org/r/20210812074422.13487-1-Hari.PrasathGE@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joakim Zhang [Thu, 12 Aug 2021 07:09:48 +0000 (15:09 +0800)]
net: fec: add WoL support for i.MX8MQ
By default FEC driver treat irq[0] (i.e. int0 described in dt-binding) as
wakeup interrupt, but this situation changed on i.MX8M serials, SoC
integration guys mix wakeup interrupt signal into int2 interrupt line.
This patch introduces FEC_QUIRK_WAKEUP_FROM_INT2 to indicate int2 as wakeup
interrupt for i.MX8MQ.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20210812070948.25797-1-qiangqing.zhang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geert Uytterhoeven [Wed, 11 Aug 2021 15:49:00 +0000 (17:49 +0200)]
ravb: Remove checks for unsupported internal delay modes
The EtherAVB instances on the R-Car E3/D3 and RZ/G2E SoCs do not support
TX clock internal delay modes, and the EtherAVB driver prints a warning
if an unsupported "rgmii-*id" PHY mode is specified, to catch buggy
DTBs.
Commit
a6f51f2efa742df0 ("ravb: Add support for explicit internal
clock delay configuration") deprecated deriving the internal delay mode
from the PHY mode, in favor of explicit configuration using the now
mandatory "rx-internal-delay-ps" and "tx-internal-delay-ps" properties,
thus delegating the warning to the legacy fallback code.
Since explicit configuration of a (valid) internal clock delay
configuration is enforced by validating device tree source files against
DT binding files, and all upstream DTS files have been converted as of
commit
a5200e63af57d05e ("arm64: dts: renesas: rzg2: Convert EtherAVB to
explicit delay handling"), the checks in the legacy fallback code can be
removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/2037542ac56e99413b9807e24049711553cc88a9.1628696778.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Skripkin [Wed, 11 Aug 2021 17:13:21 +0000 (20:13 +0300)]
net: hso: drop unused function argument
_hso_serial_set_termios() doesn't use it's second argument, so it can be
dropped.
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210811171321.18317-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>