OSDN Git Service
Peter Lieven [Wed, 18 Jun 2014 16:40:11 +0000 (18:40 +0200)]
block/iscsi: fix init value for iTask->retries
during rebasing the changed init value for the
retry counter was missed. This resulted in no retries
being performed at all.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Lieven [Wed, 4 Jun 2014 12:33:26 +0000 (14:33 +0200)]
block/iscsi: bump libiscsi requirement to 1.9.0
This patch lifts the minimum supported libiscsi version from 1.4.0 to
1.9.0 since the BUSY patch required that change.
On one this allows us to remove all #ifdefs from the code which
makes the code easier to maintain and read. On the other hand
I would not recommend libiscsi prior to 1.8.0 for production use
because the following important libiscsi fixes for deadlocks and
protocol errors are missing prior to 1.8.0:
dbe9a1e SOCKET queue cmd PDUs directly in waitpdu queue
30df192 DATA-OUT set pdu->cmdsn appropriately
548bd22 ISCSI fix broken send logic in iscsi_scsi_async_command
14bee10 RECONNECT do not increase CmdSN for immediate PDUs
1f4a66a PDU queue out PDUs in order of itt.
562dd46 PDU avoid incrementing itt to 0xffffffff
cd09c0f PDU use serial32 arithmetic for cmdsn, maxcmdsn and expcmdsn.
89e918e SOCKET validate data_size in in_pdu header
91267f5 Limit immediate and unsolicited data to FirstBurstLength
Note that libiscsi 1.9.0 was released on Feb 24th, 2013, about
one month after 1.8.0.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 14:40:31 +0000 (16:40 +0200)]
virtio-scsi: add support for the any_layout feature
Store the request and response headers by value, and let
virtio_scsi_parse_req check that there is only one of datain
and dataout.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 18:16:20 +0000 (20:16 +0200)]
virtio-scsi: introduce virtio_scsi_complete_cmd_req
This is also related to sense handling, and will be used
by anylayout.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 14:58:19 +0000 (16:58 +0200)]
virtio-scsi: prepare sense data handling for any_layout
Retrieve sense and copy it to guest memory, to prepare for when we will use
qemu_iovec_from_buf.
Swap response and request, since we'll use the tail of VirtIOSCSIReq
for the CDB.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 14:39:24 +0000 (16:39 +0200)]
virtio-scsi: add extra argument and return type to qemu_sgl_concat
Will be used for anylayout support.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 14:53:39 +0000 (16:53 +0200)]
virtio-scsi: add target swap for VirtIOSCSICtrlTMFReq fields
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 14:21:18 +0000 (16:21 +0200)]
virtio-scsi: start preparing for any_layout
- Introduce virtio_scsi_init_req and virtio_scsi_free_req
- rename qemu_sgl_init_external to qemu_sgl_concat
- move virtio_scsi_parse_req from virtio_scsi_pop_req to callers
and add header length checks to virtio_scsi_parse_req.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 14:21:28 +0000 (16:21 +0200)]
util: add return value to qemu_iovec_concat_iov
This will be necessary later to recognize the case where a
request has both dataout and datain.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Jun 2014 15:26:13 +0000 (17:26 +0200)]
megasas: use PCI DMA API
MegaSAS emulation is not IOMMU-friendly. Fix this by switching to
pci_dma_* functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexey Kardashevskiy [Thu, 12 Jun 2014 05:41:37 +0000 (15:41 +1000)]
scsi: Print command name in debug
This makes scsi_command_name() public.
This makes use of scsi_command_name() in debug output for scsi-disk and
spapr-vscsi host bus adapter. Before this, SCSI used to print hex numbers
instead of human-friendly strings.
This adds GET_EVENT_STATUS_NOTIFICATION and READ_DISC_INFORMATION to
the list of SCSI commands supported by scsi_command_name().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ulrich Obergfell [Sun, 8 Jun 2014 17:22:33 +0000 (19:22 +0200)]
scsi-disk: fix bug in scsi_block_new_request() introduced by commit
137745c
This patch fixes a bug in scsi_block_new_request() that was introduced
by commit
137745c5c60f083ec982fe9e861e8c16ebca1ba8. If the host cache
is used - i.e. if BDRV_O_NOCACHE is _not_ set - the 'break' statement
needs to be executed to 'fall back' to SG_IO.
Cc: qemu-stable@nongnu.org
Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paul Janzen [Thu, 5 Jun 2014 05:33:40 +0000 (22:33 -0700)]
scsi-disk.c: Fix compilation with -DDEBUG_SCSI
In scsi-disk.c, if you #define DEBUG_SCSI=1, you get:
hw/scsi/scsi-disk.c: In function 'scsi_disk_emulate_command':
hw/scsi/scsi-disk.c:2018: error: 'SCSIRequest' has no member named 'buf'
Change the debugging statement to match the actual value tested.
Signed-off-by: Paul Janzen <pcj@pauljanzen.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Lieven [Wed, 4 Jun 2014 13:47:39 +0000 (15:47 +0200)]
block/iscsi: use 16 byte CDBs only when necessary
this patch changes the driver to uses 16 Byte CDBs for
READ/WRITE only if the target requires 64bit lba addressing.
On one hand this saves 6 bytes in each PDU on the other
hand it seems that 10 Byte CDBs seems to be much better
supported and tested as a recent issue I had with a
major storage supplier lined out.
For WRITESAME the logic is a bit more tricky as WRITESAME10
with UNMAP was added really late. Thus a fallback to WRITESAME16
is possible if it supports UNMAP and WRITESAME10 not.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Lieven [Tue, 10 Jun 2014 07:52:16 +0000 (09:52 +0200)]
block/iscsi: fix potential segfault on early callback
it might happen in the future that a function directly invokes its callback.
In this case we end up in a segfault because the iTask is gone when the BH
is scheduled.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Lieven [Fri, 30 May 2014 21:36:47 +0000 (23:36 +0200)]
block/iscsi: handle BUSY condition
this patch adds handling of BUSY status reponse from an iSCSI target.
Currently, we fail with -EIO in case of SCSI_STATUS_BUSY while the
obvious reaction would be to retry the operation after some time.
The retry time is randomly choosen from a range with exponential
growth increasing with each retry.
This patch includes most of the changes by a an upcoming patch
from Stefan Hajnoczi:
iscsi: implement .bdrv_detach/attach_aio_context()
because I also need the reference to the aio_context for
the retry timer to work. I included the changes to maintain
better mergeability.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Mon, 16 Jun 2014 17:26:21 +0000 (18:26 +0100)]
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-06-16
This pull request brings a lot of fun things. Among others we have
- e500: u-boot firmware support
- sPAPR: magic page enablement
- sPAPR: add "compat" CPU option to support older guests
- sPAPR: refactorings in preparation for VFIO
- POWER8 live migration
- mac99: expose bus frequency
- little endian core dump, gdb and disas support
- new ppc64le-linux-user target
- DFP emulation
- bug fixes
# gpg: Signature made Mon 16 Jun 2014 12:28:32 BST using RSA key ID
03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (156 commits)
spapr_pci: Advertise MSI quota
PPC: KVM: Make pv hcall endian agnostic
powerpc: use float64 for frsqrte
spapr: Add kvm-type property
spapr: Create SPAPRMachine struct
linux-user: Tell guest about big host page sizes
spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
spapr_hcall: Split h_set_mode()
target-ppc: Enable DABRX SPR and limit it to <=POWER7
target-ppc: Enable PPR and VRSAVE SPRs migration
target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs
KVM: target-ppc: Enable TM state migration
target-ppc: Add POWER8's TM SPRs
target-ppc: Add POWER8's MMCR2/MMCRS SPRs
target-ppc: Enable FSCR facility check for TAR
target-ppc: Add POWER8's FSCR SPR
target-ppc: Add POWER8's TIR SPR
target-ppc: Refactor class init for POWER7/8
target-ppc: Switch POWER7/8 classes to use correct PMU SPRs
target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Mon, 16 Jun 2014 14:43:25 +0000 (16:43 +0200)]
rules.mak: remove $(sort) from extract-libs
Duplicate removal was added to extract-libs in order to avoid including
the same library multiple times into the linking command line; this could
potentially happen when using "foo.mo-libs" (which adds the library to
all components, causing it to appear N times if the module is composed
of N objects). However, sorting and removing duplicates causes problems
with static linking, and also with space-separated linker options as
found in some Mac OS X packaging systems. Furthermore, the "optimization"
is really a non-problem since we do not expect .mo modules to be composed
of many files.
Reported-by: Sean Bruno <sbruno@ignoranthack.me>
Tested-by: Sean Bruno <sbruno@ignoranthack.me>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1402929805-16836-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 16 Jun 2014 11:27:47 +0000 (12:27 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Mon 16 Jun 2014 12:22:22 BST using RSA key ID
81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (39 commits)
QemuOpts: cleanup tmp 'allocated' member from QemuOptsList
cleanup QEMUOptionParameter
vpc.c: replace QEMUOptionParameter with QemuOpts
vmdk.c: replace QEMUOptionParameter with QemuOpts
vhdx.c: replace QEMUOptionParameter with QemuOpts
vdi.c: replace QEMUOptionParameter with QemuOpts
ssh.c: replace QEMUOptionParameter with QemuOpts
sheepdog.c: replace QEMUOptionParameter with QemuOpts
rbd.c: replace QEMUOptionParameter with QemuOpts
raw_bsd.c: replace QEMUOptionParameter with QemuOpts
raw-win32.c: replace QEMUOptionParameter with QemuOpts
raw-posix.c: replace QEMUOptionParameter with QemuOpts
qed.c: replace QEMUOptionParameter with QemuOpts
qcow2.c: replace QEMUOptionParameter with QemuOpts
QemuOpts: export qemu_opt_find
qcow.c: replace QEMUOptionParameter with QemuOpts
nfs.c: replace QEMUOptionParameter with QemuOpts
iscsi.c: replace QEMUOptionParameter with QemuOpts
gluster.c: replace QEMUOptionParameter with QemuOpts
cow.c: replace QEMUOptionParameter with QemuOpts
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Badari Pulavarty [Wed, 11 Jun 2014 08:49:33 +0000 (18:49 +1000)]
spapr_pci: Advertise MSI quota
Hotplug of multiple disks fails due to MSI vector quota check.
Number of MSI vectors default to 8 allowing only 4 devices.
This happens on RHEL6.5 guest. RHEL7 and SLES11 guests fallback
to INTX.
One way to workaround the issue is to increase total MSIs,
so that MSI quota check allows us to hotplug multiple disks.
This sets the quota to the maximum number of interupts XICS has
which is 1024 now (XICS_IRQS). This moves XICS_IRQS from spapr.c
to xics.h for wider visibility.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
[aik: put XICS_IRQS=1024 instead of 64i, fixed endianness and size]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Wed, 11 Jun 2014 10:19:03 +0000 (12:19 +0200)]
PPC: KVM: Make pv hcall endian agnostic
There were a few revisions of the Linux kernel that incorrectly swapped
the hcall instructions when they saw ePAPR compliant hypercalls.
We already have fixups for those in place when running with PR KVM, but
HV KVM and systems that don't implement hypercalls at all are still broken
because they fall back to the QEMU implementation of fallback hypercalls.
So let's make the fallback hypercall instruction path endian agnostic. This
only really works well for 64bit guests, but I don't think there are any 32bit
systems left that don't implement real pv hcall support, so we'll never get
into this code path.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tristan Gingold [Tue, 3 Jun 2014 09:14:20 +0000 (11:14 +0200)]
powerpc: use float64 for frsqrte
Remove the code that reduce the result to float32 as the frsqrte
instruction is defined to return a double-precision estimate of
the reciprocal square root.
Although reducing the fractional part is harmless (as the estimation
must have at least 12 bits of precision according to the old PEM),
reducing the exponent range is not correct.
Signed-off-by: Tristan Gingold <gingold@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Eduardo Habkost [Fri, 30 May 2014 21:24:32 +0000 (18:24 -0300)]
spapr: Add kvm-type property
The kvm-type machine option was left out when MachineState was
introduced, preventing the kvm-type option from being used. Add the
missing property to the sPAPR machine class, so it can be used.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Eduardo Habkost [Fri, 30 May 2014 21:24:31 +0000 (18:24 -0300)]
spapr: Create SPAPRMachine struct
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Thu, 5 Jun 2014 09:39:43 +0000 (11:39 +0200)]
linux-user: Tell guest about big host page sizes
We tell the guest its page size via AUX vectors. The guest process then uses
this page size as information on which boundaries it can mmap() things.
However, if the host has a bigger page size granularity than the guest, it can
not fulfill these mmap() requests - which falls apart when MAP_FIXED is passed
to mmap.
So in that case, let the guest know that we're running on a bigger page size
granularity than the target would require.
This fixes running qemu-ppc (TARGET_PAGE_SIZE=4k) on a 64k page size ppc64 host
for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:51:05 +0000 (22:51 +1000)]
spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
This adds handling of the RESOURCE_ADDR_TRANS_MODE resource from
the H_SET_MODE, for POWER8 (PowerISA 2.07) only.
This defines AIL flags for LPCR special register.
This changes @excp_prefix according to the mode, takes effect in TCG.
This turns support of a new capability PPC2_ISA207S flag for TCG.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:51:04 +0000 (22:51 +1000)]
spapr_hcall: Split h_set_mode()
This moves H_SET_MODE_RESOURCE_LE handler to a separate function
as there are other "resources" coming and this is going to become ugly.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:51:03 +0000 (22:51 +1000)]
target-ppc: Enable DABRX SPR and limit it to <=POWER7
This adds DABRX SPR.
As DABR(X) are present in POWER CPUs till POWER7 only and POWER8 does not
have them (as it implements more powerful facility instead), this limits
DABR/DABRX registration by POWER7 (inclusive).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:51:02 +0000 (22:51 +1000)]
target-ppc: Enable PPR and VRSAVE SPRs migration
This hooks SPR with their "KVM set_one_reg" counterparts which enables
their migration.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:51:01 +0000 (22:51 +1000)]
target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs
POWER8 supports Event-Based Branch Facility (EBB). It is controlled via
set of SPRs access to which should generate an "Facility Unavailable"
interrupt if the facilities are not enabled in FSCR for problem state.
This adds EBB SPRs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:51:00 +0000 (22:51 +1000)]
KVM: target-ppc: Enable TM state migration
This adds migration support for registers saved before Transactional
Memory (TM) transaction started.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:59 +0000 (22:50 +1000)]
target-ppc: Add POWER8's TM SPRs
This adds TM (Transactional Memory) SPRs.
This adds generic spr_read_prev_upper32()/spr_write_prev_upper32() to
handle upper half SPRs such as TEXASRU which is upper half of TEXASR.
Since this is not the only register like that and their numbers go
consequently, it makes sense to generalize the helpers.
This adds a gen_msr_facility_check() helper which purpose is to generate
the Facility Unavailable exception if the facility is disabled.
It is a copy of gen_fscr_facility_check() but it checks for enabled
facility in MSR rather than FSCR/HFSCR. It still sets the interrupt cause
in FSCR/HFSCR (whichever is passed to the helper).
This adds spr_read_tm/spr_write_tm/spr_read_tm_upper32/spr_write_tm_upper32
which are used for TM SPRs.
This adds TM-relates MSR bits definitions. This enables TM in POWER8 CPU class'
msr_mask.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:58 +0000 (22:50 +1000)]
target-ppc: Add POWER8's MMCR2/MMCRS SPRs
This adds POWER8 specific PMU MMCR2/MMCRS SPRs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:57 +0000 (22:50 +1000)]
target-ppc: Enable FSCR facility check for TAR
This makes user-privileged read/write fail if TAR facility is not enabled
in FSCR.
Since this is the very first check for enabled in FSCR facility,
this also adds gen_fscr_facility_check() for using in spr_write_tar()/
spr_read_tar().
This enables TAR in FSCR for user mode unconditionally.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:56 +0000 (22:50 +1000)]
target-ppc: Add POWER8's FSCR SPR
This adds an FSCR (Facility Status and Control Register) SPR. This defines
names for FSCR bits.
This defines new exception type - POWERPC_EXCP_FU - "facility unavailable" (FU).
This registers an interrupt vector for it at 0xF60 as PowerISA defines.
This adds a TCG helper_fscr_facility_check() helper to raise an exception
if the facility is not enabled. It updates the interrupt cause field
in FSCR. This adds a TCG translation block generation code. The helper
may be used for HFSCR too as it has the same format.
The helper raising FU exceptions is not used by this patch but will be
in the next ones.
This adds gen_update_current_nip() to update NIP in DisasContext.
This helper is not used now and will be called before checking for
a condition for throwing an FU exception.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:55 +0000 (22:50 +1000)]
target-ppc: Add POWER8's TIR SPR
This adds TIR (Thread Identification Register) SPR first defined for server
CPUs in PowerISA 2.07.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:54 +0000 (22:50 +1000)]
target-ppc: Refactor class init for POWER7/8
This extends init_proc_book3s_64 to support POWER7 and POWER8.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:53 +0000 (22:50 +1000)]
target-ppc: Switch POWER7/8 classes to use correct PMU SPRs
This replaces gen_spr_7xx() call (which registers 32bit SPRs) with
gen_spr_book3s_pmu() call.
This removes SPR_7XX_PMC5/6 as they are for 32bit and gen_spr_book3s_pmu()
already registers correct PMC5/6 SPRs.
This removes explicit MMCRA registration as gen_spr_book3s_pmu() does it
anyway.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:52 +0000 (22:50 +1000)]
target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8
This makes use of generic gen_spr_power5p_lpar() which registers LPCR SPR.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:51 +0000 (22:50 +1000)]
target-ppc: Make use of gen_spr_book3s_altivec() for POWER7/8
This replaces VRSAVE registration and vscr_init() call with
gen_spr_book3s_altivec() which is generic and does the same thing if
insns_flags has PPC_ALTIVEC bit set (which POWER7/8 have set).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:50 +0000 (22:50 +1000)]
target-ppc: Move POWER7/8 CFAR/DSCR/CTRL/PPR/PCR SPR registration to helpers
This moves SCFAR/DSCR/CTRL/PPR/PCR PRs to helpers. Later these helpers
will be called from generalized init_proc_book3s_64().
This switches init_proc_POWER7() to use generalized gen_spr_book3s_common()
which registers CRTL SPR under slightly different names. No change in
behaviour or non-debug output is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:49 +0000 (22:50 +1000)]
target-ppc: Move POWER8 TCE Address control (TAR) to a helper
This moves TAR SPR to a helper. Later this helper will be
called from generalized init_proc_book3s_64().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:48 +0000 (22:50 +1000)]
target-ppc: Move POWER7/8 PIR/PURR/SPURR SPR registration to helpers
This moves PIR/PURR/SPURR SPRs to helpers. Later these helpers will be
called from generalized init_proc_book3s_64().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:47 +0000 (22:50 +1000)]
target-ppc: Enable PMU SPRs migration
This enabled PMU SPRs migration by hooking hypv privileged versions with
"KVM one reg" IDs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:46 +0000 (22:50 +1000)]
target-ppc: Remove check_pow_970FX
After merging 970s into one class, check_pow_970() is used for all of them.
Since POWER5+ is no different in the matter of supported power modes,
let's use the same check_pow() callback for POWER5+ too,
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:45 +0000 (22:50 +1000)]
target-ppc: Introduce and reuse generalized init_proc_book3s_64()
At the moment every POWER CPU family has its own init_proc_POWERX function.
E500 already has common init function so we try to do the same thing.
This introduces BOOK3S_CPU_TYPE enum with 2 values - 970 and POWER5+.
This introduces generalized init_proc_book3s_64() which accepts a CPU type
as a parameter.
This uses new init function for 970 and POWER5+ CPU classes.
970 and POWER5+ use the same CPU class initialization except 3 things:
1. logical partitioning is controlled by LPCR (POWER5+) and HID4 (970)
SPRs;
2. 970 does not have EAR (External Access Register) SPR and PowerISA 2.03
defines one so keep it only for POWER5+;
3. POWER5+ does not have ALTIVEC so insns_flags does not have PPC_ALTIVEC
flag set and gen_spr_book3s_altivec() won't init ALTIVEC for POWER5+.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:44 +0000 (22:50 +1000)]
target-ppc: Add HID4 SPR for PPC970
Previously LPCR was registered for the 970 class which was wrong as
it does not have LPCR. Instead, HID4 is used which this patch registers.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:43 +0000 (22:50 +1000)]
target-ppc: Add PMC7/8 to 970 class
Compared to PowerISA-compliant CPUs, 970 family has most of them plus
PMC7/8 which are only present on 970 but not on POWER5 and later CPUs.
Since we are changing SPRs for Book3s/970 families, let's add them too.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:42 +0000 (22:50 +1000)]
target-ppc: Add PMC5/6, SDAR and MMCRA to 970 family
MMCR0, MMCR1, MMCRA, PMC1..6, SIAR, SDAR are defined for 970 and PowerISA
CPUs. Since we are building common infrastructure for SPRs intialization
to share it between 970 and POWER5+/7/..., let's add missing SPRs to
the 970 family. Later rework of CPU class initialization will use those
for all PowerISA CPUs.
This adds new SPRs and enables writing to Uxxxx SPRs from supermode.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:41 +0000 (22:50 +1000)]
target-ppc: Add "POWER" prefix to MMCRA PMU registers
Since we started adding "POWER" prefix to 64bit PMU SPRs, let's finish
the transition and fix MMCRA and define a supermode version of it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:40 +0000 (22:50 +1000)]
target-ppc: Copy and split gen_spr_7xx() for 970
This stops using 7xx common SPRs init function and adds separate set
of helpers for 970.
This does not copy ICTC SPR as neither 970 manual nor PowerISA mention it.
This defines 970/book3s PMU SPRs constants as they differs from the ones
used for 7XX.
This creates 2 helpers for PMU SPRs, one for supermode privileged SPRs and
one for user privileged SPRs as "sup" versions can be shared across
the family while "user" versions will behave different starting POWER8
(which will be addressed later).
This allows writing to Uxxxx SPRs from supermode. spr_write_ureg() is
implemented for this as a copy of already existing spr_read_ureg().
This allows writing to supervisor's SIAR - it used to be disabled
when gen_spr_7xx() was used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:39 +0000 (22:50 +1000)]
target-ppc: Make UCTRL a mirror of CTRL
This changes UCTRL SPR to read from its supermode copy.
This enables reading from UCTRL in user mode.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:38 +0000 (22:50 +1000)]
target-ppc: Refactor PPC970
This splits one init_proc_970() into a set of small helpers. Later
init_proc_970() will be generalized and will call different set of helpers
depending on the current CPU class.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:37 +0000 (22:50 +1000)]
target-ppc: Merge 970FX and 970MP into a single 970 class
The differences between classes were:
1. SLB size, was 32 for 970 and 64 for others, should be 64 for all;
2. check_pow() callback, HID0 format is the same so should be the same
0x01C00000 which means "deep nap", "doze" and "nap" bits set;
3. LPCR - 970 does not have it but 970MP had one (by mistake).
This fixes wrong differences and makes one 970 class.
This fixes wrong registration of LPCR which is not present on 970.
This defines HID0 bits and uses them in check_pow_970().
This does not copy MSR_SHV (Hypervisor State, HV) bit from 970FX to
970 class as we do not emulate hypervisor in QEMU anyway.
This does not remove check_pow_970FX now as it is still used by POWER5+
class, this will be addressed later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Wed, 4 Jun 2014 12:50:36 +0000 (22:50 +1000)]
target-ppc: Rename 7XX/60x/74XX/e600 PMU SPRs
As defined in Linux kernel, PMC*, SIAR, MMCR0/1 have different numbers
for 32 and 64 bit POWERPC. We are going to support 64bit versions too so
let's rename 32bit ones to avoid confusion.
This is a mechanical patch so it does not fix obvious mistake with these
registers in POWER7 yet, this will be fixed later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tom Musta [Wed, 4 Jun 2014 17:26:02 +0000 (12:26 -0500)]
target-ppc: Fix Temporary Variable Leak in bctar
Fix a temporary variable leak detected in the bctar instruction:
Opcode 13 10 11 (
4d910460) leaked temporaries
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Wed, 4 Jun 2014 20:58:50 +0000 (22:58 +0200)]
PPC: e500: Merge 32 and 64 bit SPE emulation
Today we have a lot of conditional code in the SPE emulation depending on
whether we have 64bit GPRs or not.
Unfortunately the assumption that we can just recycle the 64bit GPR
implementation is wrong. Normal SPE implementations maintain the upper 32 bits
on all non-SPE instructions which then only modify the low 32 bits. However
all instructions we model that adhere to the normal SF based switching don't
care whether they operate on 32 or 64 bit registers and just always use the full
64 bits.
So let's remove that dubious SPE optimization and revert everything to the same
code path the 32bit target code was taking. That way we get rid of differences
between the two implementations, but will get a slight performance hit when
emulating SPE instructions.
This fixes SPE emulation with qemu-system-ppc64 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Thu, 24 Apr 2014 12:57:04 +0000 (14:57 +0200)]
PPC: spapr: Expose /hypervisor node in device tree
PR KVM supports an ePAPR compliant hypercall interface in parallel to the
normal sPAPR one. Expose the ePAPR /hypervisor node and properties to the
guest so it can use it.
This enables magic page sharing on PR KVM with -M pseries.
However we had a few nasty bugs in the magic page implementation on vcpus
newer than 970 (p7, p8) that KVM now has workarounds for. It indicates that
it does have these workarounds through the PPC_FIXUP_HCALL capability.
To not expose broken guest kernels to issues on host kernels that don't
have the fixups in place, we don't expose working hypercall instructions
when the fixups are not available so that the guest can never active the
magic page.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Wed, 4 Jun 2014 10:14:08 +0000 (12:14 +0200)]
KVM: PPC: Expose fixup hcall capability
New kvm versions expose a PPC_FIXUP_HCALL capability. Make it visible to
machine code so we can take decisions based on it.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Wed, 4 Jun 2014 10:02:00 +0000 (12:02 +0200)]
linux-headers: update linux headers to kvm/next
This updates the kvm headers to commit
820b3fcd in kvm/next.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Wed, 4 Jun 2014 10:03:03 +0000 (12:03 +0200)]
linux-headers: include psci.h
The kvm headers now have a dependency on psci.h, sync it into our linux
header copy as well.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Wed, 4 Jun 2014 00:01:10 +0000 (02:01 +0200)]
PPC: SPE: Fix high-bits bitmask
The SPE emulation code wants to access the highest 32bits of a 64bit register
and uses the andi TCG instruction for that. Unfortunately it masked with the
wrong mask. Fix the mask to actually cover the upper 32 bits.
This fixes simple multiplication tests with SPE guests for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Tue, 3 Jun 2014 22:27:31 +0000 (00:27 +0200)]
PPC: e500: Fix TLB lookup for 32bit CPUs
When we run 32bit guest CPUs (or 32bit guest code on 64bit CPUs) on
qemu-system-ppc64 the TLB lookup will use the full effective address
as pointer.
However, only the first 32bits are valid when MSR.CM = 0. Check for
that condition.
This makes QEMU boot an e500v2 guest with more than 1G of RAM for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Peter Maydell [Thu, 29 May 2014 11:05:34 +0000 (12:05 +0100)]
hw/pci-host/ppce500: Fix typo in vmstate definition
Fix a typo in the ppce500_pci vmstate definition which meant that
we were migrating the struct pci_inbound using the vmstate for
pci_outbound. Fortunately the two structures have exactly the same
format at the moment (four uint32_ts) so this was harmless, and
we can correcting the typo without a migration compatibility
break because the vmstate name doesn't go out on the wire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tom Musta [Thu, 29 May 2014 14:12:24 +0000 (09:12 -0500)]
target-ppc: Store Quadword Conditional Drops Size Bit
The size and register information are encoded into the reserve_info field
of CPU state in the store conditional translation code. Specifically, the
size is shifted left by 5 bits (see target-ppc/translate.c gen_conditional_store).
The user-mode store conditional code erroneously extracts the size by ANDing
with a 4 bit mask; this breaks if size >= 16.
Eliminate the mask to make the extraction of size mirror its encoding.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tom Musta [Thu, 29 May 2014 14:12:23 +0000 (09:12 -0500)]
target-ppc: Confirm That .bss Pages Are Valid
The existing code does a check to ensure that a .bss region is properly
mmap'd. When additional mmap is required, the (guest) pages are also
validated. However, this code has a bug: when host page size is larger
than target page size, it is possible for the .bss pages to already be
(host) mapped but the guest .bss pages may not be valid.
The check to mmap additional space is separated from the flagging of the
target (guest) pages, thus ensuring that both aspects are done properly.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tom Musta [Thu, 29 May 2014 14:12:22 +0000 (09:12 -0500)]
target-ppc: Support VSX in PPC User Mode
Some modern tool chains use VSX instructions. Therefore attempt to enable the VSX MSR
bit by default, just like similar bits (FP, VEC, SPE, etc.).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Doug Kwan [Thu, 29 May 2014 14:12:21 +0000 (09:12 -0500)]
target-ppc: Add a new user mode target for little-endian PPC64.
Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Doug Kwan [Thu, 29 May 2014 14:12:20 +0000 (09:12 -0500)]
target-ppc: Allow little-endian user mode.
This allows running PPC64 little-endian in user mode if target is configured
that way. In PPC64 LE user mode we set MSR.LE during initialization.
Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Doug Kwan [Thu, 29 May 2014 14:12:19 +0000 (09:12 -0500)]
target-ppc: Support little-endian PPC64 in user mode.
Look at ELF header to determine ABI version on PPC64. This is required
for executing the first instruction correctly. Also print correct machine
name in uname() system call.
Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alex Zuepke [Wed, 28 May 2014 17:25:36 +0000 (19:25 +0200)]
PPC: e500: Fix MMUCSR0 emulation
A "mtspr SPRMMUCSR0, reg" always flushed TLB0,
because it passed the SPR number 0x3f4 to the flush routine.
But we want to flush either TLB0 or TBL1 depending on the GPR value.
Signed-off-by: Alex Zuepke <alexander.zuepke@hs-rm.de>
[agraf: change subject line, fix TCGv size mismatch]
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Tue, 27 May 2014 05:36:37 +0000 (15:36 +1000)]
spapr_iommu: Introduce bus_offset in sPAPRTCETable
This adds @bus_offset into sPAPRTCETable to tell where TCE table starts
from. It is set to 0 for emulated devices. Dynamic DMA windows will use
other offset.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Tue, 27 May 2014 05:36:36 +0000 (15:36 +1000)]
spapr_iommu: Introduce page_shift in sPAPRTCETable
At the moment only 4K pages are supported by sPAPRTCETable. Since sPAPR
spec allows other page sizes and we are going to implement them, we need
page size to be configrable.
This adds @page_shift into sPAPRTCETable and replaces SPAPR_TCE_PAGE_SHIFT
with it where it is possible.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Tue, 27 May 2014 05:36:35 +0000 (15:36 +1000)]
spapr_iommu: Get rid of window_size in sPAPRTCETable
This removes window_size as it is basically a copy of nb_table
shifted by SPAPR_TCE_PAGE_SHIFT. As new dynamic DMA windows are
going to support windows as big as the entire RAM and this number
will be bigger that 32 capacity, we will have to do something
about @window_size anyway and removal seems to be the right way to go.
This removes dma_window_start/dma_window_size from sPAPRPHBState as
they are no longer used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Tue, 27 May 2014 05:36:34 +0000 (15:36 +1000)]
spapr_iommu: Convert old qdev_init_nofail() to object_property_set_bool
qdev_init_nofail() was replaced by object_property_set_bool("realized")
all over the QEMU so do we.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Tue, 27 May 2014 05:36:33 +0000 (15:36 +1000)]
spapr_pci: Allow multiple TCE tables per PHB
At the moment sPAPRPHBState contains a @tcet pointer to the only
TCE table. However sPAPR spec allows having more than one DMA window.
Since the TCE object is already a child of SPAPR PHB object, there is
no need to keep an additional pointer to it in sPAPRPHBState so remove it.
This changes the way sPAPRPHBState::reset performs reset of sPAPRTCETable
objects.
This changes the default DMA window properties calculation.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Tue, 27 May 2014 05:36:32 +0000 (15:36 +1000)]
spapr_pci: spapr_iommu: Make DMA window a subregion
Currently the default DMA window is represented by a single MemoryRegion.
However there can be more than just one window so we need
a "root" memory region to be separated from the actual DMA window(s).
This introduces a "root" IOMMU memory region and adds a subregion for
the default DMA 32bit window. Following patches will add other
subregion(s).
This initializes a default DMA window subregion size to the guest RAM
size as this window can be switched into "bypass" mode which implements
direct DMA mapping.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Tue, 27 May 2014 05:36:31 +0000 (15:36 +1000)]
spapr_pci: Introduce a finish_realize() callback
The spapr-pci PHB initializes IOMMU for emulated devices only.
The upcoming VFIO support will do it different. However both emulated
and VFIO PHB types share most of the initialization code.
For the type specific things a new finish_realize() callback is
introduced.
This introduces sPAPRPHBClass derived from PCIHostBridgeClass and
adds the callback pointer.
This implements finish_realize() for emulated devices.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: Fix compilation]
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Tue, 27 May 2014 05:36:30 +0000 (15:36 +1000)]
spapr_iommu: Enable multiple TCE requests
Currently only single TCE entry per request is supported (H_PUT_TCE).
However PAPR+ specification allows multiple entry requests such as
H_PUT_TCE_INDIRECT and H_STUFF_TCE. Having less transitions to the host
kernel via ioctls, support of these calls can accelerate IOMMU operations.
This implements H_STUFF_TCE and H_PUT_TCE_INDIRECT.
This advertises "multi-tce" capability to the guest if the host kernel
supports it (KVM_CAP_SPAPR_MULTITCE) or guest is running in TCG mode.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Tue, 27 May 2014 05:36:29 +0000 (15:36 +1000)]
spapr: Enable dynamic change of the supported hypercalls list
At the moment the "ibm,hypertas-functions" list is fixed. However some
calls should be listed there if they are supported by QEMU or the host
kernel.
This enables hyperrtas_prop to grow on stack by adding
a SPAPR_HYPERRTAS_ADD macro. "qemu,hypertas-functions" is converted as well.
The first user of this is going to be a "multi-tce" property.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 26 May 2014 23:59:06 +0000 (01:59 +0200)]
macio: Fix timer endianness
The timer registers on our KeyLargo macio emulation are read as byte reversed
from the big endian guest, so we better expose them endian reversed as well.
This fixes initial hickups of booting Mac OS X with -M mac99 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Alexander Graf [Mon, 26 May 2014 08:27:58 +0000 (10:27 +0200)]
macio ide: Do remainder access asynchronously
The macio IDE controller has some pretty nasty magic in its implementation to
allow for unaligned sector accesses. We used to handle these accesses
synchronously inside the IO callback handler.
However, the block infrastructure changed below our feet and now it's impossible
to call a synchronous block read/write from the aio callback handler of a
previous block access.
Work around that limitation by making the unaligned handling bits also go
through our asynchronous handler.
This fixes booting Mac OS X for me.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tom Musta [Wed, 14 May 2014 17:14:42 +0000 (12:14 -0500)]
target-ppc: Fix popcntb Opcode Bug
The popcntb instruction is erroneously encoded with opcode extension (opc1,opc2) = (0x03,0x03).
Bits 21-30 of popcntb are 122 =
0b00011-
0b11010 and therefore this should be encoded
as (opc1,opc2) = (0x1A, 0x03).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Mon, 12 May 2014 08:46:32 +0000 (18:46 +1000)]
spapr_iommu: Replace @instance_id with LIOBN for migration
SPAPR IOMMU is a bus-less device and therefore its only ID in
migration stream is an instance id which is not reliable ID
as it depends on the command line parameters order. Since
libvirt may change the order, we need something better than that.
This removes VMSD descriptor from the class definitiion and
registers it with @liobn as an intance ID to let the destination
side find the right device to receive migration data.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Fri, 23 May 2014 02:26:58 +0000 (12:26 +1000)]
KVM: PPC: Enable compatibility mode
The host kernel implements a KVM_REG_PPC_ARCH_COMPAT register which
this uses to enable a compatibility mode if any chosen.
This sets the KVM_REG_PPC_ARCH_COMPAT register in KVM. ppc_set_compat()
signals the caller if the mode cannot be enabled by the host kernel.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix TCG compat setting]
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Fri, 23 May 2014 02:26:57 +0000 (12:26 +1000)]
spapr: Implement processor compatibility in ibm, client-architecture-support
Modern Linux kernels support last POWERPC CPUs so when a kernel boots,
in most cases it can find a matching cpu_spec in the kernel's cpu_specs
list. However if the kernel is quite old, it may be missing a definition
of the actual CPU. To provide an ability for old kernels to work on modern
hardware, a Processor Compatibility Mode has been introduced
by the PowerISA specification.
>From the hardware prospective, it is supported by the Processor
Compatibility Register (PCR) which is defined in PowerISA. The register
enables one of the compatibility modes (2.05/2.06/2.07).
Since PCR is a hypervisor privileged register and cannot be
directly accessed from the guest, the mode selection is done via
ibm,client-architecture-support (CAS) RTAS call using which the guest
specifies what "raw" and "architected" CPU versions it supports.
QEMU works out the best match, changes a "cpu-version" property of
every CPU and notifies the guest about the change by setting these
properties in the buffer passed as a response on a custom H_CAS hypercall.
This implements ibm,client-architecture-support parameters parsing
(now only for PVRs) and cooks the device tree diff with new values for
"cpu-version", "ibm,ppc-interrupt-server#s" and
"ibm,ppc-interrupt-server#s" properties.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Fri, 23 May 2014 02:26:56 +0000 (12:26 +1000)]
spapr: Limit threads per core according to current compatibility mode
This puts a limit to the number of threads per core based on the current
compatibility mode. Although PowerISA specs do not specify the maximum
threads per core number, the linux guest still expects that
PowerISA2.05-compatible CPU supports only 2 threads per core as this
is what POWER6 (2.05 compliant CPU) implements, the same is for
POWER7 (2.06, 4 threads) and POWER8 (2.07, 8 threads).
This calls spapr_fixup_cpu_smt_dt() with the maximum allowed number of
threads which affects ibm,ppc-interrupt-server#s and
ibm,ppc-interrupt-gserver#s properties.
The number of CPU nodesremains unchanged.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Fri, 23 May 2014 02:26:55 +0000 (12:26 +1000)]
spapr: Rework spapr_fixup_cpu_dt()
In PPC code we usually use the "cs" name for a CPUState* variables
and "cpu" for PowerPCCPU. So let's change spapr_fixup_cpu_dt() to
use same rules as spapr_create_fdt_skel() does.
This adds missing nodes creation if they do not already exist in
the current device tree, this is going to be used from
the client-architecture-support handler.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Fri, 23 May 2014 02:26:54 +0000 (12:26 +1000)]
spapr: Add ibm, client-architecture-support call
The PAPR+ specification defines a ibm,client-architecture-support (CAS)
RTAS call which purpose is to provide a negotiation mechanism for
the guest and the hypervisor to work out the best compatibility parameters.
During the negotiation process, the guest provides an array of various
options and capabilities which it supports, the hypervisor adjusts
the device tree and (optionally) reboots the guest.
At the moment the Linux guest calls CAS method at early boot so SLOF
gets called. SLOF allocates a memory buffer for the device tree changes
and calls a custom KVMPPC_H_CAS hypercall. QEMU parses the options,
composes a diff for the device tree, copies it to the buffer provided
by SLOF and returns to SLOF. SLOF updates the device tree and returns
control to the guest kernel. Only then the Linux guest parses the device
tree so it is possible to avoid unnecessary reboot in most cases.
The device tree diff is a header with an update format version
(defined as 1 in this patch) followed by a device tree with the properties
which require update.
If QEMU detects that it has to reboot the guest, it silently does so
as the guest expects reboot to happen because this is usual pHyp firmware
behavior.
This defines custom KVMPPC_H_CAS hypercall. The current SLOF already
has support for it.
This implements stub which returns very basic tree (root node,
no properties) to the guest.
As the return buffer does not contain any change, no change in behavior is
expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Fri, 23 May 2014 02:26:53 +0000 (12:26 +1000)]
target-ppc: Define Processor Compatibility Masks
This introduces PCR mask for supported compatibility modes.
This will be used later by the ibm,client-architecture-support call.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Fri, 23 May 2014 02:26:52 +0000 (12:26 +1000)]
target-ppc: Implement "compat" CPU option
This adds basic support for the "compat" CPU option. By specifying
the compat property, the user can manually switch guest CPU mode from
"raw" to "architected".
This defines feature disable bits which are not used yet as, for example,
PowerISA 2.07 says if 2.06 mode is selected, the TM bit does not matter -
transactional memory (TM) will be disabled because 2.06 does not define
it at all. The same is true for VSX and 2.05 mode. So just setting a mode
must be ok.
This does not change the existing behavior as the actual compatibility
mode support is coming in next patches.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Fri, 23 May 2014 02:26:51 +0000 (12:26 +1000)]
spapr: Move SMT-related properties out of skeleton fdt
The upcoming support of the "ibm,client-architecture-support"
reconfiguration call will be able to change dynamically the number
of threads per core (SMT mode). From the device tree prospective
this does not change the number of CPU nodes (as it is one node per
a CPU core) but affects content and size of the ibm,ppc-interrupt-server#s
and ibm,ppc-interrupt-gserver#s properties.
This moves ibm,ppc-interrupt-server#s and ibm,ppc-interrupt-gserver#s
out of the device tree skeleton.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexey Kardashevskiy [Fri, 23 May 2014 02:26:50 +0000 (12:26 +1000)]
target-ppc: Add "compat" CPU option
PowerISA defines a compatibility mode for server POWERPC CPUs which
is supported by the PCR special register which is hypervisor privileged.
To support this mode for guests, SPAPR defines a set of virtual PVRs,
one per PowerISA spec version. When a hypervisor needs a guest to work in
a compatibility mode, it puts a virtual PVR value into @cpu-version
property of a CPU node.
This introduces a "compat" CPU option which defines maximal compatibility
mode enabled. The supported modes are power6/power7/power8.
This does not change the existing behaviour, new property will be used
by next patches.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Thu, 22 May 2014 15:12:23 +0000 (17:12 +0200)]
PPC: openpic_kvm: Implement reset
When we trigger a system reset, the in-kernel openpic controller should also
get reset. This happens through a write to the GCR.RESET register which is
the same mechanism a guest would use to manually reset the device.
Signed-off-by: Alexander Graf <agraf@suse.de>
Paul Janzen [Thu, 22 May 2014 06:09:45 +0000 (23:09 -0700)]
openpic: Reset IRQ source private members
The openpic emulation code maintains an allowable-CPU's bitmap
("destmask") for each IRQ source which is calculated from the IDR
register value whenever the guest OS writes to it. However, if the
guest OS relies on the system to set the IDR register to a default
value at reset, and does not write IDR, then destmask does not get
updated, and interrupts do not get propagated to the guest.
Additionally, if an IRQ source is marked as critical, the source's
internal "output" and "nomask" fields are not correctly reset when the
PIC is reset.
Fix both these issues by calling write_IRQreg_idr from within
openpic_reset, instead of simply setting the IDR register to the
specified idr_reset value.
Signed-off-by: Paul Janzen <pcj@pauljanzen.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Paul Janzen [Thu, 22 May 2014 04:46:52 +0000 (21:46 -0700)]
openpic: Move definition of openpic_reset
This patch moves the definition of openpic_reset after the various
register read/write functions. No functional change. It is in
preparation for using the register read/write functions in
openpic_reset.
Signed-off-by: Paul Janzen <pcj@pauljanzen.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Bharata B Rao [Mon, 19 May 2014 17:59:22 +0000 (19:59 +0200)]
target-ppc: Set the correct endianness in ELF dump header
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Greg Kurz [Mon, 19 May 2014 17:59:05 +0000 (19:59 +0200)]
target-ppc: Introduce callback for interrupt endianness
POWER7, POWER7+ and POWER8 families use the ILE bit of the LPCR
special purpose register to decide the endianness to use when
entering interrupt handlers. When running a Linux guest, this
provides a hint on the endianness used by the kernel. And when
it comes to dumping a guest, the information is needed to write
ELF headers using the kernel endianness.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
[agraf: change subject line]
Signed-off-by: Alexander Graf <agraf@suse.de>
Bharata B Rao [Mon, 19 May 2014 17:58:35 +0000 (19:58 +0200)]
target-ppc: Support dump for little endian ppc64
Fix ppc64 arch specific dump code to support all combinations of little/big
endian hosts/guests. FWIW the current code is broken for altivec registers
when guest and host have a different endianness: these 128-bit registers
are written to guest memory as a two 64-bit entities and we should also swap
them.
Unit testing was done with the following program provided by Tom Musta:
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
int main(int argc, char** argv)
{
__uint128_t v = ((__uint128_t)0x0001020304050607ull << 64) |
0x08090a0b0c0d0e0full;
register void * vptr asm ("r11");
vptr = &v;
for(;;)
asm volatile ("lvx 30,0,11" );
}
When sending SIGABRT to this program and examining the core file, we get:
- ppc64 : 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
- ppc64le: 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
We expect to find the very same layout in the QEMU dump since they are
real core files. This is what we get:
- ppc64 host, ppc64 guest : 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
- ppc64 host, ppc64le guest : 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
- x86_64 host, ppc64 guest : 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
- x86_64 host, ppc64le guest: 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
We introduce a NoteFuncArg type to avoid adding extra arguments to all note
functions.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[ rebased on top of current master branch,
introduced NoteFuncArg,
use new cpu_to_dump{16,32,64} endian helpers,
fix altivec support,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Bharata B Rao [Mon, 19 May 2014 17:57:44 +0000 (19:57 +0200)]
dump: Make DumpState and endian conversion routines available for arch-specific dump code
Make DumpState and endian conversion routines available for arch-specific dump
code by moving into dump.h. DumpState will be needed by arch-specific dump
code to access target endian information from DumpState->ArchDumpInfo. Also
break the dependency of dump.h from stubs/dump.c by creating a separate
dump-arch.h.
This patch doesn't change any functionality.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[ rebased on top of current master branch,
renamed endian helpers to cpu_to_dump{16,32,64},
pass a DumpState * argument to endian helpers,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
[agraf: fix to apply]
Signed-off-by: Alexander Graf <agraf@suse.de>