OSDN Git Service
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:33 +0000 (15:01 -0700)]
staging: comedi: cb_pcidas64: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address of PCI bar 3.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:32 +0000 (15:01 -0700)]
staging: comedi: ni_670x: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:31 +0000 (15:01 -0700)]
staging: comedi: ni_6527: iounmap resource when detached
PCI bar 1 is ioremap'ed during the (*auto_attach). This resource
needs to be iounmap'ed when the driver is (*detach)ed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:30 +0000 (15:01 -0700)]
staging: comedi: ni_6527: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:29 +0000 (15:01 -0700)]
staging: comedi: dt3000: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:28 +0000 (15:01 -0700)]
staging: comedi: daqboard2000: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:27 +0000 (15:01 -0700)]
staging: comedi: addi_apci_3xxx: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:26 +0000 (15:01 -0700)]
staging: comedi: icp_multi: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:25 +0000 (15:01 -0700)]
staging: comedi: mf6x4: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:24 +0000 (15:01 -0700)]
staging: comedi: me_daq: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:23 +0000 (15:01 -0700)]
staging: comedi: gsc_hpdi: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:22 +0000 (15:01 -0700)]
staging: comedi: ni_65xx: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Since this was the only member in the private data, remove the struct
and its allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:21 +0000 (15:01 -0700)]
staging: comedi: 8255_pci: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Since this was the only member in the private data, remove the struct
and its allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 29 Jul 2014 22:01:20 +0000 (15:01 -0700)]
staging: comedi: add an 'mmio' member to comedi_device
All the comedi drivers that use memory mapped io currently have a
void __iomem * member in their private data for the driver. For
some of the drivers this is actually the only member in that data.
For convienence, add a new member to the comedi_device for this
void __iomem *.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:26 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: tidy up stuct pci230_private
Align the member comments a bit better in the declaration of `struct
pci230_private`. Also remove the heading comment as it is just a
boilerplate comedi comment.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:25 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: no need to initialize named members to zero
The members of the elements of `pci230_boards[]` that are not explicitly
named in their initializers will be initialized to 0 automatically, so
there is no need to initialize them to 0 explicitly.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:24 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: add whitespace to pci230_boards[]
Add a bit of whitespace to the initializer of `pci230_boards[]` for
aesthetic reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:23 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: no need for '&function'
Remove the "address-of" operator when the operand is a function.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:22 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: remove some indentation in pci230_ai_check_chanlist()
A few lines in `pci230_ai_check_chanlist()` are indented one level too
much, so remove the excess indentation.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:20 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: omit '!= 0' from logical expressions
Since anything non-zero is logically "true", don't bother doing
"not-equal" comparisons with zero.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:19 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: don't begin line with binary operator
If an expression involving a binary operator needs to be split across
two lines, put the split after the operator.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:18 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: add whitespace to register values
Several macros are defined for bit-field values within hardware
registers. They are defined as left-shifted values. Add some
whitespace around the left-shift operator.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:17 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: remove PCI230_TEST_BIT()
The `PCI230_TEST_BIT()` macro is never used. Remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:16 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: remove PCI230_ADC_CONV
The macro `PCI230_ADC_CONV` is never used. Just remove it. (At one
time, the value was written to the `PCI230_ADCSWTRIG` register to
trigger a conversion, but any value would do, and the driver no longer
uses that register to trigger conversions anyway.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:15 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: remove unused settling time constants
The macro constants `PCI230_DAC_SETTLE`, `PCI230_ADC_SETTLE` and
`PCI230_MUX_SETTLE` are never used. Just remove them.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:14 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: usleep_range is preferred over udelay
Fix checkpatch issue: "CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt". I picked 100 us as a reasonable
upper bound, but it's not that critical.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:13 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: alignment should match open parenthesis
Fix checkpatch issue: "CHECK: Alignment should match open parenthesis".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:12 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: blank lines aren't necessary before a close brace '}'
Fix checkpatch issues: "CHECK: Blank lines aren't necessary before a
close brace '}'".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:11 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: logical continuations should be on the previous line
Fix checkpatch issues "CHECK: Logical continuations should be on the
previous line".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:10 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: fix checkpatch line over 80 characters
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:09 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: reformat a load of comments
Reformat a load of comments to fit in with the preferred coding style,
including the copyright and driver description comments at the top of
the file.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:27:04 +0000 (10:27 -0700)]
staging: comedi: ni_tiocmd: introduce ni_tio_acknowledge()
The external callers of ni_tio_acknowledge_and_confirm() only call
this function to ack any pending errors or interrupts before starting
a new async command. Only the internal code in ni_tiocmd uses the
data that is optionally returned by this function.
Remove the export from ni_tio_acknowledge_and_confirm() and introduce
a new exported function that handles passing the NULL params.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:27:03 +0000 (10:27 -0700)]
staging: comedi: ni_tiocmd: tidy up ni_tio_input_cmd()
The cmd->start_src is validated in the (*do_cmdtest) before this
function is called. All valid trigger sources are handled so the
default BUG() case can never occure.
For aesthetics, refactor the switch into if/else tests and remove
the BUG().
For aesthetics, rename the local variable 'retval' to simply 'ret'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:27:02 +0000 (10:27 -0700)]
staging: comedi: ni_tiocmd: tidy up ni_tio_input_inttrig()
Remove the BUG_ON(counter == NULL). If this can never happen and it
if did the driver should have died long before this function is called.
For aesthetics, rename the local variable 'retval' to simply 'ret'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:27:01 +0000 (10:27 -0700)]
staging: comedi: ni_tiocmd: tidy up ni_tio_configure_dma()
The 'enable' and 'read_not_write' parameters are true/false flags. For
aesthetics, change their types to bool.
Rename the local variable 'input_select_bits' to simply 'bits' and reuse
it when enabling the dma on the m series and 660x counter variants.
Add a local variable for the 'mask' that is passed to ni_tio_set_bits()
to help clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:27:00 +0000 (10:27 -0700)]
staging: comedi: ni_tio: tidy up G{02, 12}_Interrupt_Enable_Bits
Convert these enums into defines and rename the CamelCase symbols.
For aesthetics, move the new defines so they are associated with
the register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:59 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gi_Status_Bits
Convert this enum into defines and rename the CamelCase symbols.
For aesthetics, move the new defines so they are associated with
the register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:58 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gxx_Interrupt_Acknowledge_Bits
Convert this enum and the others related to it into defines and
rename the CamelCase symbols.
For aesthetics, move the new defines so they are associated with
the register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:57 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gi_DMA_Status_Reg_Bits
Convert this enum into defines and rename the CamelCase symbols.
For aesthetics, move the new defines so they are associated with
the register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:56 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gi_DMA_Config_Reg_Bits
Convert this enum into defines and rename the CamelCase symbols.
For aesthetics, move the new defines so they are associated with
the register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:55 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gxx_Joint_Status2_Bits
Convert this enum into defines and rename the CamelCase symbols.
For aesthetics, move the new defines so they are associated with
the register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:54 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gi_Reset_Bit
Convert this inline CamelCase function into a define.
For aesthetics, move the new define so it is associated with the
register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:53 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gxx_Status_Bits
Convert this enum into defines and rename the CamelCase symbols.
For aesthetics, move the new defines so they are associated with
the register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:52 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gi_Second_Gate_Bits
Convert this enum into defines and rename the CamelCase symbols.
For aesthetics, move the new defines so they are associated with
the register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:51 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gi_Mode_Bits
Convert this enum into defines and rename the CamelCase symbols.
For aesthetics, move the new defines so they are associated with
the register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:50 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gi_Input_Select_Bits
Convert this enum into defines and rename the CamelCase symbols.
For aesthetics, move the new defines so they are associated with
the register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:49 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gi_Auto_Increment_Reg_Bits
Convert this enum into defines and rename the CamelCase symbols.
For aesthetics, move the new defines so they are associated with
the register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:48 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gi_Command_Reg_Bits
Convert this enum into defines and rename all the CamelCase symbols.
For aesthetics, move the new defines so they are associated with the
register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:47 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up Gi_Counting_Mode_Reg_Bits
Convert this enum into defines and rename all the CamelCase symbols.
For aesthetics, move the new defines so they are associated with the
register define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 28 Jul 2014 17:26:46 +0000 (10:26 -0700)]
staging: comedi: ni_tio: tidy up ni_tio_read_sw_save_reg()
Remove the need for some of the local variables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:35 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236, amplc_pci236: get rid of bustype
The `bustype` member of `struct pc236_board` variables is initialized,
but never used. Remove it along with the enumerated constants
associated with it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:34 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: split into ISA, PCI and common module
The "amplc_pc236" driver currently handles both ISA and PCI devices and
uses a small amount of conditional compilation depending which are
enabled.
Move most of the functionality into a new module, "amplc_pc236_common",
and split off support for PCI devices into a new module, "amplc_pci236".
Retain support for ISA devices in the existing module, "amplc_pc236".
Since the `detach` handler (`pc236_detach()`) in the existing module
"amplc_pc236" now only needs to handle ISA devices and only calls
`comedi_legacy_detach()`, just use `comedi_legacy_detach()` directly as
the `detach` handler in `struct comedi_driver amplc_pc236_driver`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:33 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: add callback to check and clear interrupt
Add an optional callback function pointer to the board data to be called
when checking if an interrupt has occurred and to clear it if it has.
Since the callback returns `bool`, change a few other `int` values to
`bool` to match.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:32 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: combine interrupt enable/disable functions
`pc236_intr_enable()` and `pc236_intr_disable()` are very similar.
Combine them into a single function `pc236_intr_update()` with a
parameter to indicate whether interrupts are being enabled or disabled.
Change type type of the `enable_irq` member of the private data to
`bool` to match the parameter.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:31 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: add callback to enable/disable interrupt
Add an optional callback function pointer to the board data to be called
when interrupts are logically enabled or disabled to update the hardware
registers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:30 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: don't disable h/w interrupt on detach()
If an asynchronous command was running when the device is being
detached, the comedi core would have called the subdevice `cancel`
handler (`pc236_intr_cancel()`) before calling the `detach` handler
(`pc236_detach()`). Since the cancel handler disables hardware
interrupts (at least for the PCI236 board) by calling
`pc236_disable_intr()`, there is no need for the detach handler to do so
as well. Remove the call to `pc236_disable_intr()` from
`pc236_detach()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:29 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: move static board data
Move the static board data in `pc236_isa_boards[]` and `pc236_pci_board`
closer to where they are used.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 17:07:09 +0000 (18:07 +0100)]
staging: comedi: amplc_dio200_pci: no need to test board pointer in dio200_pci_detach()
`dio200_pci_detach()` doesn't need to check if the pointer to constant
board data (`thisboard`) and the pointer to private per-device data
(`devpriv`) are valid before calling `amplc_dio200_common_detach()`. It
has no further need to check `thisboard` so remove the variable
altogether. Move the test of `devpriv` to the first point it is needs
to be valid.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 17:07:08 +0000 (18:07 +0100)]
staging: comedi: amplc_dio200_common: remove some tests from amplc_dio200_common_detach()
`amplc_dio200_common_detach()` doesn't do much apart from freeing the
IRQ handler that was requested by `amplc_dio200_common_attach()` if
`dev->irq` is non-zero. There is no need to check if the pointer to
the constant board data or the pointer to private per-device data
exist, so remove those tests.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 17:07:07 +0000 (18:07 +0100)]
staging: comedi: amplc_dio200_common: prevent extra free_irq()
`dio200_detach()` in "amplc_dio200.c" calls
`amplc_dio200_common_detach()` in "amplc_dio200_common.c", followed by
`comedi_legacy_detach()` in "../drivers.c". Both of those functions
call `free_irq()` if `dev->irq` is non-zero. The second call produces a
warning message because the handler has already been freed. Prevent
that by setting `dev->irq = 0` in `amplc_dio200_common_detach()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Max Vozeler [Mon, 28 Jul 2014 11:28:10 +0000 (13:28 +0200)]
staging: usbip: remove redundant return statements
Remove redundant return statements at the end of void functions. This
addresses the checkpatch.pl warnings:
WARNING: void function return statements are not generally useful
Signed-off-by: Max Vozeler <max@hinterhof.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rahul Garg [Mon, 28 Jul 2014 01:32:32 +0000 (07:02 +0530)]
staging: vt6655: coding style: Fixed commenting style
fix coding style: use C89 comments, not C99
Signed-off-by: Rahul Garg <rahul.lnmiit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Clement [Fri, 25 Jul 2014 12:47:23 +0000 (14:47 +0200)]
staging: vt6655: fix direct dereferencing of user pointer
Sparse reported that the data from tagSCmdRequest is given by
userspace, so it should be tagged as such.
Later, we were memcomparing and dereferencing it without first copying
it, fix that as well.
Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabian Frederick [Wed, 23 Jul 2014 19:04:38 +0000 (21:04 +0200)]
staging: ion: vm_insert_pfn and zap_page_range rely on CONFIG_MMU
Fix following sh-allmodconfig errors reported on kisskb
"
drivers/built-in.o: In function `ion_vm_fault':
ion.c:(.text+0x1f2d8f8): undefined reference to `vm_insert_pfn'
drivers/built-in.o: In function `ion_buffer_sync_for_device':
ion.c:(.text+0x1f316bc): undefined reference to `zap_page_range'
make: *** [vmlinux] Error 1
"
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kristina Martšenko [Sun, 27 Jul 2014 19:59:50 +0000 (22:59 +0300)]
staging: sep: remove driver
Looks like no one's working on the driver anymore, so remove it for now.
If someone wants to work on moving it out of staging, this commit can be
reverted.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Mark A. Allyn <mark.a.allyn@intel.com>
Cc: Jayant Mangalampalli <jayant.mangalampalli@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Thery [Sun, 27 Jul 2014 18:32:06 +0000 (20:32 +0200)]
staging: ft1000: remove procfs entries
This patch started as a fix to some checkpatch complaints in ft1000
procfs code but Greg suggested to remove the procfs entries altogether:
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2014-July/055594.html
Signed-off-by: Nicolas Thery <nthery@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Fite [Sun, 27 Jul 2014 18:31:08 +0000 (20:31 +0200)]
staging: lustre: lov: Fix sparse warning using plain integer as NULL pointer
This patch fixes the warning generated by sparse: "Using plain integer as NULL pointer" by replacing the offending 0s with NULL.
drivers/staging/lustre/lustre/lov/lov_obd.c:902:48: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:946:54: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:2819:46: warning: Using plain integer as NULL pointer
Signed-off-by: Marc Fite <marc@fite.cat>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sylvain Calador [Sun, 27 Jul 2014 17:35:48 +0000 (19:35 +0200)]
staging: rtl8821ae: fixed a space coding style issue
Fixed a coding style issue.
Signed-off-by: Sylvain Calador <sylvain.calador@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rickard Strandqvist [Sat, 26 Jul 2014 14:43:20 +0000 (16:43 +0200)]
staging: usbip: stub_main.c: Cleaning up missing null-terminate in conjunction with strncpy
Replacing strncpy with strlcpy to avoid strings that lacks null terminate.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rickard Strandqvist [Sat, 26 Jul 2014 14:41:46 +0000 (16:41 +0200)]
staging: unisys: include: uisutils.h: Cleaning up missing null-terminate in conjunction with strncpy
Replacing strncpy with strlcpy to avoid strings that lacks null terminate.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Seunghun Lee [Fri, 25 Jul 2014 16:49:01 +0000 (01:49 +0900)]
staging: dgnc: remove commented code
This patch removes commented code in dgnc driver.
CC: Lidza Louina <lidza.louina@gmail.com>
CC: Mark Hounschell <markh@compro.net>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:53:12 +0000 (19:53 +0300)]
Staging: vt6655: removed redundant comments from power.h
Removed redundant comments from power.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:50:25 +0000 (19:50 +0300)]
Staging: vt6655: removed redundant comments from michael.h
Removed redundant comments from michael.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:48:48 +0000 (19:48 +0300)]
Staging: vt6655: removed redundant comments from mib.h
Removed redundant comments from mib.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:33:04 +0000 (19:33 +0300)]
Staging: vt6655: removed redundant comments from iowpa.h
Removed redundant comments from iowpa.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:31:26 +0000 (19:31 +0300)]
Staging: vt6655: removed redundant comments from ioctl.h
Removed redundant comments from ioctl.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:29:28 +0000 (19:29 +0300)]
Staging: vt6655: removed redundant comments from iocmd.h
Removed redundant comments from iocmd.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:26:14 +0000 (19:26 +0300)]
Staging: vt6655: removed redundant comments from IEEE11h.h
Removed redundant comments from IEEE11h.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:22:35 +0000 (19:22 +0300)]
Staging: vt6655: removed redundant comments from hostap.h
Removed redundant comments from hostap.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:20:50 +0000 (19:20 +0300)]
Staging: vt6655: removed redundant comments from dpc.h
Removed redundant comments from dpc.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:10:36 +0000 (19:10 +0300)]
Staging: vt6655: removed redundant comments from device_cfg.h
Removed redundant comments from device_cfg.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 16:05:31 +0000 (19:05 +0300)]
Staging: vt6655: removed redundant comments from desc.h
Removed redundant comments from desc.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
C99 style comments will be fixed in further patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 15:39:36 +0000 (18:39 +0300)]
Staging: vt6655: removed redundant comments from channel.h
Removed redundant comments from channel.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 15:43:22 +0000 (18:43 +0300)]
Staging: vt6655: removed redundant comments from country.h
Removed redundant comments from country.h header file
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 15:47:53 +0000 (18:47 +0300)]
Staging: vt6655: removed redundant comments from datarate.h
Removed redundant comments from datarate.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Bezukh [Fri, 25 Jul 2014 15:34:23 +0000 (18:34 +0300)]
Staging: vt6655: remove redundant comments from card.h
Removed redundant comments from card.h header file.
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Fri, 25 Jul 2014 14:35:37 +0000 (20:05 +0530)]
staging: bcm: DDRInit.c: fixed coding style: lines over 80 char
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:58 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: set board_name before common attach
For PCI boards, the `auto_attach` handler, `pc236_auto_attach()`,
initializes `dev->board_ptr` to point to a `struct pc236_board`, but
leaves `dev->board_name` unchanged. The Comedi core will have
initialized `dev->board_name` to the `driver_name` string member of
`amplc_pc236_driver`. For consistency with ISA boards manually
configured by the `COMEDI_DEVCONFIG` ioctl via the legacy `attach`
handler, `pc236_attach()`, set `dev->board_name` to the `name` member of
the `struct pc236_board` pointed to by `dev->board_ptr`.
Both `pc236_attach()` and `pc236_auto_attach()` call
`pc236_common_attach()`, which also sets `dev->board_name` to the `name`
member of the `struct pc236_board`. Since this assignment no longer
changes anything, remove it.
A nice side-effect of this change is that the same owner name string is
used for requesting I/O regions (before the call the
`pc236_common_attach()`) as is used for requesting the IRQ handler
(during the call to `pc236_common_attach()`). It was already the same
for (manually configured) ISA boards, but is now the same for
(automatically configured) PCI boards.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:57 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: remove PCI device ID macros
The `PCI_DEVICE_ID_AMPLICON_PCI236` macro is only used once, in the
module device table, so remove it and expand the macro in the table.
`The `PCI_DEVICE_ID_INVALID` macro is no longer used, so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:56 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: Simplify PCI board look-up
Since only a single PCI board is supported by the driver, there is no
need to call `pc236_find_pci_board()` to find the a board entry with
matching PCI device ID in `pc236_pci_boards[]`. Just point to the entry
directly and remove the look-up function. In fact, there is no reason
for `pc236_pci_boards[]` to be an array, so change it to a non-array
variable and rename it to `pc236_pci_board`. Also, the `devid` member
of `struct pc236_board` is no longer needed as it was only used by the
look-up function, so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:55 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: don't check bus type in attach
Since the legacy attach routine `pc236_attach()` is only called for
board names matching an entry in our array of ISA boards
`pc236_isa_boards[]`, and it is reasonable to expect all elements of
`pc236_isa_boards[]` to have their `bustype` member initialized
correctly to `isa_bustype`, don't bother checking the bus type in
`pc236_attach()`. Add `if (!DO_ISA) return -EINVAL` to optimize out the
remainder of the function if `CONFIG_COMEDI_AMPLC_PC236_ISA` is not
defined.
Similarly, don't bother checking the bus type in
`pc236_find_pci_board()` as it is reasonable to expect all elements of
`pc236_pci_boards[]` to have their `bustype` member initialized
correctly to `pci_bustype`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:54 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: split pc236_boards[] into ISA & PCI
Split `pc236_boards[]` into `pc236_isa_boards[]` for ISA cards and
`pc236_pci_boards[]` for PCI cards (there is only one of each). Only
initialize the board name look-up members of `struct comedi_driver
amplc_pc236_driver` if the ISA part of the driver is enabled in the
kernel config (`CONFIG_COMEDI_AMPLC_PC236_ISA`) using the array of ISA
boards (`pc236_isa_boards[]`). The driver doesn't allow manual
configuration of PCI devices, so there is no point having the comedi
core match the names of the PCI boards before it calls our driver's
legacy attach routine (`pc236_attach()`).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:53 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: remove 'model' member
The `model` member of `struct pc236_board` is no longer used since the
code to remove manual configuration of PCI devices was removed. Get rid
of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:52 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: absorb pc236_pci_common_attach()
Absorb `pc236_pci_common_attach()` into `pc236_auto_attach()` since
that's the only place it is called from.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:51 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: no need to set hw_dev
The call to `comedi_set_hw_dev()` from `pc236_pci_common_attach()` is
now unnecessary since `pc236_pci_common_attach()` is now only called
from this driver's `auto_attach` hook `pc236_auto_attach()` and the
comedi core now calls `comedi_set_hw_dev()` before calling that. Remove
the unnecessary call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:50 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: no need to manipulate PCI ref count
Now that this driver no longer supports "manual" attachment of PCI
devices in its `attach` hook (`pc236_attach()`), it no longer has code
that searches for a suitable PCI device and increments its reference
count. Since the driver no longer has any reason for incrementing and
decrementing the PCI device's reference count, the calls to
`pci_dev_get()` and `pci_dev_put()` can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:49 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: remove manual configuration of PCI boards
Remove the code that allows PCI boards to be manually attached by the
`COMEDI_DEVCONFIG` ioctl (or the "comedi_config" application).
Supported PCI boards (PCI236) will be attached automatically at probe
time via `comedi_pci_auto_config()` and the `auto_attach` hook in the
`struct comedi_driver`.
The "wildcard" entry in `pc236_boards[]` was only used when manually
attaching a PCI board using a driver name instead of a board name, so is
no longer needed. Remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:48 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: remove some boilerplate comments
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 09:04:47 +0000 (10:04 +0100)]
staging: comedi: amplc_pc236: reformat header comments
Use preferred style for copyright and driver description comments.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 25 Jul 2014 02:55:08 +0000 (22:55 -0400)]
staging: unisys: remove partition information from proc
Debugging information for the guest's channels was being exposed in proc.
Remove the code that creates these entries, which are no longer needed.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>