OSDN Git Service
Larry Finger [Thu, 28 Oct 2010 15:43:26 +0000 (10:43 -0500)]
b43: Fix warning at drivers/mmc/core/core.c:237 in mmc_wait_for_cmd
On module removal, the sdio version of b43 generates the following warning:
[ 851.560519] ------------[ cut here ]------------
[ 851.560531] WARNING: at drivers/mmc/core/core.c:237 mmc_wait_for_cmd+0x88/0x90()
[ 851.560534] Hardware name: 20552PG
[ 851.560536] Modules linked in: b43(-) ssb mmc_block binfmt_misc rfcomm sco bnep ppdev l2cap ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp kvm_intel kvm arc4 iwlagn snd_hda_codec_conexant snd_hda_intel snd_hda_codec iwlcore snd_hwdep snd_pcm thinkpad_acpi mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq r852 joydev snd_timer sm_common pcmcia nand snd_seq_device cfg80211 sdhci_pci btusb psmouse tpm_tis yenta_socket nand_ids lp snd pcmcia_rsrc nand_ecc bluetooth sdhci tpm pcmcia_core parport mtd snd_page_alloc serio_raw tpm_bios soundcore nvram led_class sha256_generic aes_i586 aes_generic dm_crypt i915 drm_kms_helper drm ahci intel_agp i2c_algo_bit intel_gtt e1000e libahci video agpgart output
[ 851.560620] Pid: 2504, comm: rmmod Not tainted 2.6.36-titan0+ #1
[ 851.560622] Call Trace:
[ 851.560631] [<
c014a102>] warn_slowpath_common+0x72/0xa0
[ 851.560636] [<
c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
[ 851.560641] [<
c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
[ 851.560645] [<
c014a152>] warn_slowpath_null+0x22/0x30
[ 851.560649] [<
c04d94c8>] mmc_wait_for_cmd+0x88/0x90
[ 851.560655] [<
c0401585>] ? device_release+0x25/0x80
[ 851.560660] [<
c04df210>] mmc_io_rw_direct_host+0xa0/0x150
[ 851.560665] [<
c04df370>] mmc_io_rw_direct+0x30/0x40
[ 851.560669] [<
c04e06e7>] sdio_disable_func+0x37/0xa0
[ 851.560683] [<
f8dfcb80>] b43_sdio_remove+0x30/0x50 [b43]
[ 851.560687] [<
c04df8cc>] sdio_bus_remove+0x1c/0x60
[ 851.560692] [<
c016d39f>] ? blocking_notifier_call_chain+0x1f/0x30
[ 851.560697] [<
c0404991>] __device_release_driver+0x51/0xb0
[ 851.560701] [<
c0404a7f>] driver_detach+0x8f/0xa0
[ 851.560705] [<
c0403c83>] bus_remove_driver+0x63/0xa0
[ 851.560709] [<
c0405039>] driver_unregister+0x49/0x80
[ 851.560713] [<
c0405039>] ? driver_unregister+0x49/0x80
[ 851.560718] [<
c04dfad7>] sdio_unregister_driver+0x17/0x20
[ 851.560727] [<
f8dfcb42>] b43_sdio_exit+0x12/0x20 [b43]
[ 851.560734] [<
f8dfe76f>] b43_exit+0x17/0x3c [b43]
[ 851.560740] [<
c017fb8d>] sys_delete_module+0x13d/0x200
[ 851.560747] [<
c01fd7d2>] ? do_munmap+0x212/0x300
[ 851.560752] [<
c010311f>] sysenter_do_call+0x12/0x28
[ 851.560757] ---[ end trace
31e14488072d2f7d ]---
[ 851.560759] ------------[ cut here ]------------
The warning is caused by b43 not claiming the device before calling
sdio_disable_func().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Arnd Hannemann <arnd@arndnet.de>
Tested-by: Arnd Hannemann <arnd@arndnet.de>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jesper Juhl [Fri, 29 Oct 2010 14:10:26 +0000 (16:10 +0200)]
mac80211: fix failure to check kmalloc return value in key_key_read
I noticed two small issues in mac80211/debugfs_key.c::key_key_read while
reading through the code. Patch below.
The key_key_read() function returns ssize_t and the value that's actually
returned is the return value of simple_read_from_buffer() which also
returns ssize_t, so let's hold the return value in a ssize_t local
variable rather than a int one.
Also, memory is allocated dynamically with kmalloc() which can fail, but
the return value of kmalloc() is not checked, so we may end up operating
on a null pointer further on. So check for a NULL return and bail out with
-ENOMEM in that case.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Paul Fox [Fri, 29 Oct 2010 13:57:28 +0000 (14:57 +0100)]
libertas: Fix sd8686 firmware reload
For the SD8686, we cannot rely on the scratch register to read the firmware
load status, because the same register is used for storing RX packet length.
Broaden the check to account for this.
The module can now be unloaded/reloaded successfully.
Based on the implementation from libertas_tf.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Steve deRosier <steve@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohammed Shafi Shajakhan [Thu, 28 Oct 2010 14:21:47 +0000 (19:51 +0530)]
ath9k: Fix incorrect access of rate flags in RC
The index variable to access the rate flags should be obtained from the
inner loop counter which corresponds to the rate table structure.This
fixes the invalid rate selection i.e when the supported basic rate is
invalid on a particular band and also the following warning message.
Thanks to Raj for finding this out.
Call Trace:
[<
ffffffff8104ee4a>] warn_slowpath_common+0x7a/0xb0
[<
ffffffff8104ee95>] warn_slowpath_null+0x15/0x20
[<
ffffffffa0583c45>] ath_get_rate+0x595/0x5b0 [ath9k]
[<
ffffffff811a0636>] ? cpumask_next_and+0x36/0x50
[<
ffffffffa0405186>] rate_control_get_rate+0x86/0x160 [mac80211]
[<
ffffffffa040dfac>] invoke_tx_handlers+0x81c/0x12d0 [mac80211]
[<
ffffffffa040eae9>] ieee80211_tx+0x89/0x2b0 [mac80211]
[<
ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0
[<
ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]
[<
ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]
[<
ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]
[<
ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
[mac80211]
[<
ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0
[<
ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]
[<
ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]
[<
ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]
[<
ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
[mac80211]
[<
ffffffffa03f8896>] ieee80211_scan_work+0x146/0x600 [mac80211]
[<
ffffffff8133a375>] ? schedule+0x2f5/0x8e0
[<
ffffffffa03f8750>] ? ieee80211_scan_work+0x0/0x600 [mac80211]
[<
ffffffff81064fcf>] process_one_work+0x10f/0x380
[<
ffffffff81066bc2>] worker_thread+0x162/0x340
[<
ffffffff81066a60>] ? worker_thread+0x0/0x340
Cc: stable@kernel.org
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jones Desougi [Wed, 27 Oct 2010 17:38:34 +0000 (19:38 +0200)]
ath5k: Fix double free on hw attach error path
If ath5k_hw_attach fails it will free sc->ah (local variable ah) before
returning. However, when it reports failure the caller (ath5k_pci_probe)
will also free sc->ah. Let the caller handle the deallocation, it does
so on further errors as well.
Signed-off-by: Jones Desougi <jones.desougi@27m.se>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jouni Malinen [Wed, 27 Oct 2010 10:40:33 +0000 (13:40 +0300)]
mac80211: Fix scan_ies_len to include DS Params
Commit
651b52254fc061f02d965524e71de4333a009a5a added DS Parameter Set
information into Probe Request frames that are transmitted on 2.4 GHz
band, but it failed to increment local->scan_ies_len to cover this new
information. This variable needs to be updated to match the maximum IE
data length so that the extra buffer need gets reduced from the driver
limit.
Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Wed, 27 Oct 2010 06:32:54 +0000 (12:02 +0530)]
ath9k_htc: Set proper firmware offset for Netgear WNDA3200
Netgear WNDA3200 device uses ar7010 firmware but it is failed to set
correct firmware offset on firmware download which causes device initialization
failure.
Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Wed, 27 Oct 2010 00:15:05 +0000 (02:15 +0200)]
ath9k: fix tx aggregation flush on AR9003
Completing aggregate frames can lead to new buffers being pushed into
the tid queues due to software retransmission.
When the tx queues are being drained, all pending aggregates must be
completed before the tid queues get drained, otherwise buffers might be
leaked.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Wed, 20 Oct 2010 23:07:06 +0000 (16:07 -0700)]
ath9k: lock reset and PCU start/stopping
Apart from locking the start and stop PCU we need
to ensure we also content starting and stopping the PCU
between hardware resets.
This is part of a series that will help resolve the bug:
https://bugzilla.kernel.org/show_bug.cgi?id=14624
For more details about this issue refer to:
http://marc.info/?l=linux-wireless&m=
128629803703756&w=2
Cc: stable@kernel.org
Cc: Ben Greear <greearb@candelatech.com>
Cc: Kyungwan Nam <kyungwan.nam@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Wed, 20 Oct 2010 23:07:05 +0000 (16:07 -0700)]
ath9k: rename rxflushlock to pcu_lock
The real way to lock RX is to contend on the PCU
and reset, this will be fixed in the next patch but for
now just do the renames so that the next patch which changes
the locking order is crystal clear.
This is part of a series that will help resolve the bug:
https://bugzilla.kernel.org/show_bug.cgi?id=14624
For more details about this issue refer to:
http://marc.info/?l=linux-wireless&m=
128629803703756&w=2
Cc: stable@kernel.org
Cc: Ben Greear <greearb@candelatech.com>
Cc: Kyungwan Nam <kyungwan.nam@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Wed, 20 Oct 2010 23:07:04 +0000 (16:07 -0700)]
ath9k: add locking for starting the PCU on RX
There was some locking for starting some parts of
RX but not for starting the PCU. Include this otherwise
we can content against stopping the PCU.
This can potentially lead to races against different
buffers on the PCU which can lead to to the DMA RX
engine writing to buffers which are already freed.
This is part of a series that will help resolve the bug:
https://bugzilla.kernel.org/show_bug.cgi?id=14624
For more details about this issue refer to:
http://marc.info/?l=linux-wireless&m=
128629803703756&w=2
Cc: stable@kernel.org
Cc: Ben Greear <greearb@candelatech.com>
Cc: Kyungwan Nam <kyungwan.nam@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Wed, 20 Oct 2010 23:07:03 +0000 (16:07 -0700)]
ath9k: add locking for stopping RX
ath9k locks for starting RX but not for stopping RX. We could
potentially run into a situation where tried to stop RX
but immediately started RX. This allows for races on the
the RX engine deciding what buffer we last left off on
and could potentially cause ath9k to DMA into already
free'd memory or in the worst case at a later time to
already given memory to other drivers.
Fix this by locking stopping RX.
This is part of a series that will help resolve the bug:
https://bugzilla.kernel.org/show_bug.cgi?id=14624
For more details about this issue refer to:
http://marc.info/?l=linux-wireless&m=
128629803703756&w=2
Cc: stable@kernel.org
Cc: Ben Greear <greearb@candelatech.com>
Cc: Kyungwan Nam <kyungwan.nam@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Don Fry [Sat, 23 Oct 2010 16:02:50 +0000 (09:02 -0700)]
iwlwifi: quiet a noisy printk
Timing issues in microcode for some devices can cause a compressed BA to
be sent to the driver prior to returning any a-MPDU notification.
Traces show RTS-CTS is exchanged and then the timer fires which causes an
empty BA to be sent which acknowledges nothing. This results in a noisy
printk. Only print the message if the bitmap is non-zero.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Sat, 23 Oct 2010 15:45:38 +0000 (17:45 +0200)]
ath9k: resume aggregation immediately after a hardware reset
Since aggregation is usually triggered by tx completion, a hardware
reset (because of beacon stuck, tx hang or baseband hang) can
significantly delay the transmission of the next AMPDU (until the next
tx completion event).
Fix this by rescheduling aggregation after such a reset.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Sat, 23 Oct 2010 13:02:02 +0000 (15:02 +0200)]
carl9170: fix scheduling while atomic
This patch fixes the following mishap:
BUG: scheduling while atomic: wpa_supplicant/4164/0x00000002
Modules linked in: carl9170 mac80211 [...]
Pid: 4164, comm: wpa_supplicant Not tainted 2.6.36-wl+ #119
Call Trace:
[<
c13779a9>] ? schedule+0x349/0x4c0
[<
c13780d6>] ? schedule_timeout+0x106/0x1e0
[<
c1037f50>] ? process_timeout+0x0/0x10
[<
c1377e8d>] ? wait_for_common+0x9d/0x140
[<
c1029110>] ? default_wake_function+0x0/0x10
[<
f80c6080>] ? carl9170_exec_cmd+0xf0/0x250 [carl9170]
[<
f80c695e>] ? carl9170_set_mac_reg+0x5e/0x70 [carl9170]
[<
f80c3f76>] ? carl9170_op_add_interface+0x176/0x310 [carl9170]
[...]
rcu_read_unlock() call was erroneously placed after the
sync. function carl9170_mod_virtual_mac.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Sat, 23 Oct 2010 05:29:57 +0000 (10:59 +0530)]
mac80211: Fix ibss station got expired immediately
Station addition in ieee80211_ibss_rx_queued_mgmt is not updating
sta->last_rx which is causing station expiry in ieee80211_ibss_work
path. So sta addition and deletion happens repeatedly.
CC: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Fri, 22 Oct 2010 15:43:45 +0000 (17:43 +0200)]
b43: N-PHY: fix infinite-loop-typo
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Grazvydas Ignotas [Thu, 21 Oct 2010 23:23:08 +0000 (02:23 +0300)]
wl1251: fix module names
The wl1251 move accidently renamed wl1251_sdio and wl1251_spi
modules to just sdio and spi. Restore proper module names.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Thu, 21 Oct 2010 00:47:24 +0000 (02:47 +0200)]
ath9k: fix handling of rate control probe frames
The ath9k aggregation code was already checking the rate control probe flag
to prevent starting an aggregate frame with a sampling rate. What was missing
was closing an aggregate before adding a probing frame to it.
Without that, rate control cannot have precise control over probing, which
delays using faster rates when the channel conditions improve.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Wed, 20 Oct 2010 13:59:28 +0000 (15:59 +0200)]
ath9k: fix crash in ath_update_survey_stats
If ah->curchan is uninitialized, the channel index is bogus, which leads
to invalid memory access when the cycle counters are updated.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Senthil Balasubramanian [Tue, 19 Oct 2010 14:31:41 +0000 (20:01 +0530)]
ath9k_hw: Fix divide by zero cases in paprd.
We are not handling all divide by zero cases in paprd.
Add additional checks for divide by zero cases in papard.
This patch has fixes intended for kernel 2.6.36.
Cc: stable@kernel.org
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 19 Oct 2010 05:47:54 +0000 (22:47 -0700)]
ath9k_hw: Fix TX carrier leakage for IEEE compliance on AR9003 2.2
This updates the initvals for the AR9003 2.2 chipsets. The initvals
are the initial register values we use for our registers upon hardware
reset. This synchs up the initvals to match what our latest recommendation
from our systems engineering team.
The description of changes in this update:
Improves ability to support very strong Rx conditions.
Enhances DFS support for AP-mode.
Improves performance of Tx carrier leak calibration.
Adds support for Japan channel 14 Tx filtering requirements.
Improves Tx power accuracy.
Impact:
Update required to address degraded throughput at very short range.
Update required for AP-mode DFS certification.
Update required to comply to IEEE Tx carrier leak specification.
May not meet expected +/- 2 dB Tx power accuracy without update.
The most important fix here would be the TX carrier leakage required
to comply with IEEE 802.11 specifications. The group of changes have
been tested all together in one release.
References:
Osprey 2.2 header file ver #33
Checksums:
$ ./initvals -f ar9003-2p2
0x000000004a488fc7 ar9300_2p2_radio_postamble
0x0000000046cb1300 ar9300Modes_lowest_ob_db_tx_gain_table_2p2
0x00000000e912711f ar9300Modes_fast_clock_2p2
0x0000000037ac0ee8 ar9300_2p2_radio_core
0x00000000047a7700 ar9300Common_rx_gain_table_merlin_2p2
0x0000000003f783bb ar9300_2p2_mac_postamble
0x00000000301fc841 ar9300_2p2_soc_postamble
0x000000005ec8075f ar9200_merlin_2p2_radio_core
0x0000000083372ffa ar9300_2p2_baseband_postamble
0x00000000c4f59974 ar9300_2p2_baseband_core
0x00000000e20d2e72 ar9300Modes_high_power_tx_gain_table_2p2
0x000000007fd55c70 ar9300Modes_high_ob_db_tx_gain_table_2p2
0x0000000029495000 ar9300Common_rx_gain_table_2p2
0x0000000042cb1300 ar9300Modes_low_ob_db_tx_gain_table_2p2
0x00000000c4739cd6 ar9300_2p2_mac_core
0x000000003521a300 ar9300Common_wo_xlna_rx_gain_table_2p2
0x00000000a15ccf1b ar9300_2p2_soc_preamble
0x0000000029734396 ar9300PciePhy_pll_on_clkreq_disable_L1_2p2
0x000000002d834396 ar9300PciePhy_clkreq_enable_L1_2p2
0x0000000029834396 ar9300PciePhy_clkreq_disable_L1_2p2
$ ./initvals -f ar9003-2p2 | sha1sum
0ceddb5cf66737610fb51f04cf3e9ff71870c7b4 -
Cc: stable@kernel.org
Cc: Yixiang Li <yixiang.li@atheros.com>
Cc: Don Breslin <don.breslin@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 19 Oct 2010 00:44:51 +0000 (17:44 -0700)]
cfg80211: fix regression on processing country IEs
The patch
4f366c5:
wireless: only use alpha2 regulatory information from country IE
removed some complex intersection we were always doing between the AP's
country IE info and what we got from CRDA. When CRDA sent us back a
regulatory domain we would do some sanity checks on that regulatory
domain response we just got. Part of these sanity checks included
checking that we already had performed an intersection for the
request of NL80211_REGDOM_SET_BY_COUNTRY_IE type.
This mean that cfg80211 was only processing country IEs for cases
where we already had an intersection, but since we removed enforcing
this this is no longer required, we should just apply the country
IE country hint with the data received from CRDA.
This patch has fixes intended for kernels >= 2.6.36.
Cc: stable@kernel.org
Reported-by: Easwar Krishnan <easwar.krishnan@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Sat, 16 Oct 2010 18:47:50 +0000 (20:47 +0200)]
carl9170: fix memory leak issue in async cmd macro wrappers
This patch continues where the previous commit:
"carl9170: fix async command buffer leak"
left off.
Similar to carl9170_reboot/carl9170_powersave, the
carl9170_async_regwrite* macros would leak the
temporary command buffer, if __carl9170_exec_cmd
fails to upload the command to the device.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Sat, 16 Oct 2010 16:49:15 +0000 (18:49 +0200)]
mac80211: don't sanitize invalid rates
I found this bug while poking around with a pure-gn AP.
Commit:
cfg80211/mac80211: Use more generic bitrate mask for rate control
Added some sanity checks to ensure that each tx rate index
is included in the configured mask and it would change any
rate indexes if it wasn't.
But, the current implementation doesn't take into account
that the invalid rate index "-1" has a special meaning
(= no further attempts) and it should not be "changed".
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Fri, 15 Oct 2010 23:38:46 +0000 (01:38 +0200)]
carl9170: fix async command buffer leak
If __carl9170_exec_cmd fails to upload an asynchronous
command to the device, the functions: carl9170_reboot
and carl9170_powersave will leak the temporary command
assembly buffer.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ben Greear [Fri, 15 Oct 2010 22:51:32 +0000 (15:51 -0700)]
ath5k: Properly initialize ath_common->cc_lock.
Otherwise, lockdep splats, at the least:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
Pid: 0, comm: swapper Not tainted 2.6.36-rc8-wl+ #32
Call Trace:
[<
c075d940>] ? printk+0xf/0x17
[<
c045507a>] register_lock_class+0x5a/0x29e
[<
c0456af5>] __lock_acquire+0xa2/0xb8c
[<
c0455be2>] ? mark_lock+0x1e/0x1de
[<
c041a540>] ? acpi_get_override_irq+0x85/0x8c
[<
c0455536>] ? trace_hardirqs_off+0xb/0xd
[<
c0457639>] lock_acquire+0x5a/0x78
[<
f8126835>] ? ath5k_ani_calibration+0x24/0x52b [ath5k]
[<
c075f6ed>] _raw_spin_lock_bh+0x20/0x2f
[<
f8126835>] ? ath5k_ani_calibration+0x24/0x52b [ath5k]
[<
f8126835>] ath5k_ani_calibration+0x24/0x52b [ath5k]
[<
c0438f99>] ? tasklet_action+0x3b/0xc6
[<
f8123c2b>] ath5k_tasklet_ani+0x18/0x22 [ath5k]
[<
c0438fd1>] tasklet_action+0x73/0xc6
[<
c043945f>] __do_softirq+0x86/0x111
[<
c0439520>] do_softirq+0x36/0x5a
[<
c0439659>] irq_exit+0x35/0x69
[<
c0403fb9>] do_IRQ+0x86/0x9a
[<
c04034ee>] common_interrupt+0x2e/0x40
[<
c045007b>] ? do_adjtimex+0x223/0x55e
[<
c0408245>] ? mwait_idle+0x5c/0x6c
[<
c040227f>] cpu_idle+0x4e/0x6b
[<
c074b6e9>] rest_init+0x8d/0x92
[<
c09758ea>] start_kernel+0x320/0x325
[<
c09750d0>] i386_start_kernel+0xd0/0xd7
Signed-off-by: Ben Greear <greearb@candelatech.com>
Acked-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ben Greear [Fri, 15 Oct 2010 22:04:09 +0000 (15:04 -0700)]
ath9k: Properly initialize ath_common->cc_lock.
Otherwise, lockdep splats, at the least:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
Pid: 2240, comm: ip Not tainted 2.6.36-rc8-wl+ #32
Call Trace:
[<
c075d940>] ? printk+0xf/0x17
[<
c045507a>] register_lock_class+0x5a/0x29e
[<
c0455be2>] ? mark_lock+0x1e/0x1de
[<
c0456af5>] __lock_acquire+0xa2/0xb8c
[<
c0455be2>] ? mark_lock+0x1e/0x1de
[<
c0457639>] lock_acquire+0x5a/0x78
[<
f8c5115b>] ? ath9k_config+0x274/0x3d8 [ath9k]
[<
c075f602>] _raw_spin_lock_irqsave+0x2f/0x3f
[<
f8c5115b>] ? ath9k_config+0x274/0x3d8 [ath9k]
[<
f8c5115b>] ath9k_config+0x274/0x3d8 [ath9k]
[<
f8c0ba2e>] ieee80211_hw_config+0x11b/0x125 [mac80211]
[<
f8c17edf>] ieee80211_do_open+0x3c5/0x466 [mac80211]
[<
f8c171d6>] ? ieee80211_check_concurrent_iface+0x21/0x13a [mac80211]
[<
f8c17fdb>] ieee80211_open+0x5b/0x5e [mac80211]
[<
c06ce76b>] __dev_open+0x80/0xae
[<
c06cc99b>] __dev_change_flags+0xa0/0x115
[<
c06ce6bf>] dev_change_flags+0x13/0x3f
[<
c06d7e78>] do_setlink+0x23a/0x51b
[<
c0455037>] ? register_lock_class+0x17/0x29e
[<
c06d847c>] rtnl_newlink+0x269/0x431
[<
c06d8291>] ? rtnl_newlink+0x7e/0x431
[<
c0455be2>] ? mark_lock+0x1e/0x1de
[<
c0455de9>] ? mark_held_locks+0x47/0x5f
[<
c075ebcf>] ? __mutex_lock_common+0x2bb/0x2d6
[<
c0456045>] ? trace_hardirqs_on_caller+0x104/0x125
[<
c075ebe0>] ? __mutex_lock_common+0x2cc/0x2d6
[<
c06d8213>] ? rtnl_newlink+0x0/0x431
[<
c06d79e2>] rtnetlink_rcv_msg+0x182/0x198
[<
c06d7860>] ? rtnetlink_rcv_msg+0x0/0x198
[<
c06e503c>] netlink_rcv_skb+0x30/0x77
[<
c06d7859>] rtnetlink_rcv+0x1b/0x22
[<
c06e4e77>] netlink_unicast+0xbe/0x119
[<
c06e5a15>] netlink_sendmsg+0x234/0x24c
[<
c06bf93a>] __sock_sendmsg+0x51/0x5a
[<
c06bfba4>] sock_sendmsg+0x93/0xa7
[<
c04968cf>] ? might_fault+0x47/0x81
[<
c0496904>] ? might_fault+0x7c/0x81
[<
c06c7904>] ? copy_from_user+0x8/0xa
[<
c06c7c2d>] ? verify_iovec+0x3e/0x6d
[<
c06bfd8c>] sys_sendmsg+0x149/0x193
[<
c0455037>] ? register_lock_class+0x17/0x29e
[<
c0455be2>] ? mark_lock+0x1e/0x1de
[<
c0498d7a>] ? __do_fault+0x1fc/0x3a5
[<
c048690a>] ? unlock_page+0x40/0x43
[<
c0498ef7>] ? __do_fault+0x379/0x3a5
[<
c04576dd>] ? lock_release_non_nested+0x86/0x1d8
[<
c04968cf>] ? might_fault+0x47/0x81
[<
c04968cf>] ? might_fault+0x47/0x81
[<
c06c148b>] sys_socketcall+0x15e/0x1a5
[<
c0402f1c>] sysenter_do_call+0x12/0x38
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tejun Heo [Fri, 15 Oct 2010 15:35:28 +0000 (17:35 +0200)]
mac80211: cancel restart_work explicitly instead of depending on flush_scheduled_work()
iee80211_hw->restart_work is the only work which uses the system
workqueue. Instead of calling flush_scheduled_work() during
iee80211_exit(), cancel the work during unregistration.
This is to prepare for the deprecation and removal of
flush_scheduled_work().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Linus Torvalds [Sun, 24 Oct 2010 20:41:39 +0000 (13:41 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
Update broken web addresses in arch directory.
Update broken web addresses in the kernel.
Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
Revert "Fix typo: configuation => configuration" partially
ida: document IDA_BITMAP_LONGS calculation
ext2: fix a typo on comment in ext2/inode.c
drivers/scsi: Remove unnecessary casts of private_data
drivers/s390: Remove unnecessary casts of private_data
net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
drivers/infiniband: Remove unnecessary casts of private_data
drivers/gpu/drm: Remove unnecessary casts of private_data
kernel/pm_qos_params.c: Remove unnecessary casts of private_data
fs/ecryptfs: Remove unnecessary casts of private_data
fs/seq_file.c: Remove unnecessary casts of private_data
arm: uengine.c: remove C99 comments
arm: scoop.c: remove C99 comments
Fix typo configue => configure in comments
Fix typo: configuation => configuration
Fix typo interrest[ing|ed] => interest[ing|ed]
Fix various typos of valid in comments
...
Fix up trivial conflicts in:
drivers/char/ipmi/ipmi_si_intf.c
drivers/usb/gadget/rndis.c
net/irda/irnet/irnet_ppp.c
Linus Torvalds [Sun, 24 Oct 2010 20:06:57 +0000 (13:06 -0700)]
Merge branch 'devel' of git://git./linux/kernel/git/mchehab/edac
* 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/edac: (25 commits)
i7300_edac: Properly initialize per-csrow memory size
V4L/DVB: i7300_edac: better initialize page counts
MAINTAINERS: Add maintainer for i7300-edac driver
i7300-edac: CodingStyle cleanup
i7300_edac: Improve comments
i7300_edac: Cleanup: reorganize the file contents
i7300_edac: Properly detect channel on CE errors
i7300_edac: enrich FBD error info for corrected errors
i7300_edac: enrich FBD error info for fatal errors
i7300_edac: pre-allocate a buffer used to prepare err messages
i7300_edac: Fix MTR x4/x8 detection logic
i7300_edac: Make the debug messages coherent with the others
i7300_edac: Cleanup: remove get_error_info logic
i7300_edac: Add a code to cleanup error registers
i7300_edac: Add support for reporting FBD errors
i7300_edac: Properly detect the type of error correction
i7300_edac: Detect if the device is on single mode
i7300_edac: Adds detection for enhanced scrub mode on x8
i7300_edac: Clear the error bit after reading
i7300_edac: Add error detection code for global errors
...
Linus Torvalds [Sun, 24 Oct 2010 19:47:55 +0000 (12:47 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/penberg/slab-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: (27 commits)
SLUB: Fix memory hotplug with !NUMA
slub: Move functions to reduce #ifdefs
slub: Enable sysfs support for !CONFIG_SLUB_DEBUG
SLUB: Optimize slab_free() debug check
slub: Move NUMA-related functions under CONFIG_NUMA
slub: Add lock release annotation
slub: Fix signedness warnings
slub: extract common code to remove objects from partial list without locking
SLUB: Pass active and inactive redzone flags instead of boolean to debug functions
slub: reduce differences between SMP and NUMA
Revert "Slub: UP bandaid"
percpu: clear memory allocated with the km allocator
percpu: use percpu allocator on UP too
percpu: reduce PCPU_MIN_UNIT_SIZE to 32k
vmalloc: pcpu_get/free_vm_areas() aren't needed on UP
SLUB: Fix merged slab cache names
Slub: UP bandaid
slub: fix SLUB_RESILIENCY_TEST for dynamic kmalloc caches
slub: Fix up missing kmalloc_cache -> kmem_cache_node case for memoryhotplug
slub: Add dummy functions for the !SLUB_DEBUG case
...
Linus Torvalds [Sun, 24 Oct 2010 19:47:25 +0000 (12:47 -0700)]
Merge branch 'kvm-updates/2.6.37' of git://git./virt/kvm/kvm
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (321 commits)
KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages
KVM: Fix signature of kvm_iommu_map_pages stub
KVM: MCE: Send SRAR SIGBUS directly
KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED
KVM: fix typo in copyright notice
KVM: Disable interrupts around get_kernel_ns()
KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address
KVM: MMU: move access code parsing to FNAME(walk_addr) function
KVM: MMU: audit: check whether have unsync sps after root sync
KVM: MMU: audit: introduce audit_printk to cleanup audit code
KVM: MMU: audit: unregister audit tracepoints before module unloaded
KVM: MMU: audit: fix vcpu's spte walking
KVM: MMU: set access bit for direct mapping
KVM: MMU: cleanup for error mask set while walk guest page table
KVM: MMU: update 'root_hpa' out of loop in PAE shadow path
KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn()
KVM: x86: Fix constant type in kvm_get_time_scale
KVM: VMX: Add AX to list of registers clobbered by guest switch
KVM guest: Move a printk that's using the clock before it's ready
KVM: x86: TSC catchup mode
...
Linus Torvalds [Sun, 24 Oct 2010 19:46:24 +0000 (12:46 -0700)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c-viapro: Don't log nacks
i2c/pca954x: Remove __devinit and __devexit from probe and remove functions
MAINTAINERS: Add maintainer for PCA9541 I2C bus master selector driver
i2c/mux: Driver for PCA9541 I2C Master Selector
i2c: Optimize function i2c_detect()
i2c: Discard warning message on device instantiation from user-space
i2c-amd8111: Add proper error handling
i2c: Change to new flag variable
i2c: Remove unneeded inclusions of <linux/i2c-id.h>
i2c: Let i2c_parent_is_i2c_adapter return the parent adapter
i2c: Simplify i2c_parent_is_i2c_adapter
i2c-pca-platform: Change device name of request_irq
i2c: Fix Kconfig dependencies
Linus Torvalds [Sun, 24 Oct 2010 19:44:59 +0000 (12:44 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (47 commits)
HID: fix mismerge in hid-lg
HID: hidraw: fix window in hidraw_release
HID: hid-sony: override usbhid_output_raw_report for Sixaxis
HID: add absolute axis resolution calculation
HID: force feedback support for Logitech RumblePad gamepad
HID: support STmicroelectronics and Sitronix with hid-stantuml driver
HID: magicmouse: Adjust major / minor axes to scale
HID: Fix for problems with eGalax/DWAV multi-touch-screen
HID: waltop: add support for Waltop Slim Tablet 12.1 inch
HID: add NOGET quirk for AXIS 295 Video Surveillance Joystick
HID: usbhid: remove unused hiddev_driver
HID: magicmouse: Use hid-input parsing rather than bypassing it
HID: trivial formatting fix
HID: Add support for Logitech Speed Force Wireless gaming wheel
HID: don't Send Feature Reports on Interrupt Endpoint
HID: 3m: Adjust major / minor axes to scale
HID: 3m: Correct touchscreen emulation
HID: 3m: Convert to MT slots
HID: 3m: Output proper orientation range
HID: 3m: Adjust to sequential MT HID protocol
...
Linus Torvalds [Sun, 24 Oct 2010 19:44:34 +0000 (12:44 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: Makefile - replace the use of <module>-objs with <module>-y
crypto: hifn_795x - use cancel_delayed_work_sync()
crypto: talitos - sparse check endian fixes
crypto: talitos - fix checkpatch warning
crypto: talitos - fix warning: 'alg' may be used uninitialized in this function
crypto: cryptd - Adding the AEAD interface type support to cryptd
crypto: n2_crypto - Niagara2 driver needs to depend upon CRYPTO_DES
crypto: Kconfig - update broken web addresses
crypto: omap-sham - Adjust DMA parameters
crypto: fips - FIPS requires algorithm self-tests
crypto: omap-aes - OMAP2/3 AES hw accelerator driver
crypto: updates to enable omap aes
padata: add missing __percpu markup in include/linux/padata.h
MAINTAINERS: Add maintainer entries for padata/pcrypt
Pekka Enberg [Sun, 24 Oct 2010 16:57:05 +0000 (19:57 +0300)]
Merge branch 'master' into for-linus
Conflicts:
include/linux/percpu.h
mm/percpu.c
Jean Delvare [Sun, 24 Oct 2010 16:16:59 +0000 (18:16 +0200)]
i2c-viapro: Don't log nacks
Transactions not acked can happen every now and then, in particular
during device detection, and various transaction types can be used for
this purpose. So stop logging this event, except when debugging is
enabled. This is what other similar drivers (e.g. i2c-i801 or
i2c-piix4) do.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Guenter Roeck [Sun, 24 Oct 2010 16:16:59 +0000 (18:16 +0200)]
i2c/pca954x: Remove __devinit and __devexit from probe and remove functions
The underlying I2C adapter may or may not be present when this driver
gets initialized, and may disappear later, so there is no safe time at
which the probe and remove functions can be discarded.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Guenter Roeck [Sun, 24 Oct 2010 16:16:59 +0000 (18:16 +0200)]
MAINTAINERS: Add maintainer for PCA9541 I2C bus master selector driver
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Guenter Roeck [Sun, 24 Oct 2010 16:16:58 +0000 (18:16 +0200)]
i2c/mux: Driver for PCA9541 I2C Master Selector
This patch adds support for PCA9541, an I2C Bus Master Selector.
The driver is modeled as single channel I2C Multiplexer to be able to utilize
the I2C multiplexer framework.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Sun, 24 Oct 2010 16:16:58 +0000 (18:16 +0200)]
i2c: Optimize function i2c_detect()
Check the class flags before allocating the temporary i2c_client
structure, to avoid allocating it when we don't need it.
Also optimize the inner loop a bit.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Jean Delvare [Sun, 24 Oct 2010 16:16:58 +0000 (18:16 +0200)]
i2c: Discard warning message on device instantiation from user-space
The "new_device" sysfs interface has been there for quite some time
now, nobody complained about it so it must be good enough. Time to
remove the warning and call it stable.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
Julia Lawall [Sun, 24 Oct 2010 16:16:58 +0000 (18:16 +0200)]
i2c-amd8111: Add proper error handling
The functions the functions amd_ec_wait_write and amd_ec_wait_read have an
unsigned return type, but return a negative constant to indicate an error
condition.
A sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@exists@
identifier f;
constant C;
@@
unsigned f(...)
{ <+...
* return -C;
...+> }
// </smpl>
Fixing amd_ec_wait_write and amd_ec_wait_read leads to the need to adjust
the return type of the functions amd_ec_write and amd_ec_read, which are
the only functions that call amd_ec_wait_write and amd_ec_wait_read.
amd_ec_write and amd_ec_read, in turn, are only called from within the
function amd8111_access, which already returns a signed typed value. Each
of the calls to amd_ec_write and amd_ec_read are updated using the
following semantic patch:
// <smpl>
@@
@@
+ status = amd_ec_write
- amd_ec_write
(...);
+ if (status) return status;
@@
@@
+ status = amd_ec_read
- amd_ec_read
(...);
+ if (status) return status;
// </smpl>
The patch also adds the declaration of the status variable.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
matt mooney [Sun, 24 Oct 2010 16:16:58 +0000 (18:16 +0200)]
i2c: Change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Sun, 24 Oct 2010 16:16:58 +0000 (18:16 +0200)]
i2c: Remove unneeded inclusions of <linux/i2c-id.h>
These drivers don't use anything which is defined in <linux/i2c-id.h>.
This header file was never meant to be included directly anyway, and
will be deleted soon.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Dave Airlie <airlied@linux.ie>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Jean Delvare [Sun, 24 Oct 2010 16:16:57 +0000 (18:16 +0200)]
i2c: Let i2c_parent_is_i2c_adapter return the parent adapter
This makes the calling site's code clearer IMHO.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
Jean Delvare [Sun, 24 Oct 2010 16:16:57 +0000 (18:16 +0200)]
i2c: Simplify i2c_parent_is_i2c_adapter
Only i2c devices can have their type set to i2c_adapter_type, so
testing the bus type is redundant.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Michael Lawnick <ml.lawnick@gmx.de>
Nobuhiro Iwamatsu [Sun, 24 Oct 2010 16:16:57 +0000 (18:16 +0200)]
i2c-pca-platform: Change device name of request_irq
i2c->adap.name shouldn't be used in request_irq.
Instead the driver name "i2c-pca-platform" should be used.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Sun, 24 Oct 2010 16:16:57 +0000 (18:16 +0200)]
i2c: Fix Kconfig dependencies
drivers/i2c/algos/Kconfig makes all the algorithms dependent on
!I2C_HELPER_AUTO, which triggers a Kconfig warning about broken
dependencies when some driver selects one of the algorithms. Ideally
we would make only the prompts dependent on !I2C_HELPER_AUTO, however
Kconfig doesn't currently support that. So we have to redefine the
symbols separately for the I2C_HELPER_AUTO=y case.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Michal Marek <mmarek@suse.cz>
Jan Kiszka [Mon, 18 Oct 2010 13:38:40 +0000 (15:38 +0200)]
KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages
We also have to call kvm_iommu_map_pages for CONFIG_AMD_IOMMU. So drop
the dependency on Intel IOMMU, kvm_iommu_map_pages will be a nop anyway
if CONFIG_IOMMU_API is not defined.
KVM-Stable-Tag.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Thu, 14 Oct 2010 11:59:04 +0000 (13:59 +0200)]
KVM: Fix signature of kvm_iommu_map_pages stub
Breaks otherwise if CONFIG_IOMMU_API is not set.
KVM-Stable-Tag.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Huang Ying [Fri, 8 Oct 2010 08:24:15 +0000 (16:24 +0800)]
KVM: MCE: Send SRAR SIGBUS directly
Originally, SRAR SIGBUS is sent to QEMU-KVM via touching the poisoned
page. But commit
96054569190bdec375fe824e48ca1f4e3b53dd36 prevents the
signal from being sent. So now the signal is sent via
force_sig_info_fault directly.
[marcelo: use send_sig_info instead]
Reported-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Huang Ying [Fri, 8 Oct 2010 08:24:14 +0000 (16:24 +0800)]
KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED
Now we have MCG_SER_P (and corresponding SRAO/SRAR MCE) support in
kernel and QEMU-KVM, the MCG_SER_P should be added into
KVM_MCE_CAP_SUPPORTED to make all these code really works.
Reported-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Nicolas Kaiser [Wed, 6 Oct 2010 12:23:22 +0000 (14:23 +0200)]
KVM: fix typo in copyright notice
Fix typo in copyright notice.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avi Kivity [Mon, 4 Oct 2010 10:55:49 +0000 (12:55 +0200)]
KVM: Disable interrupts around get_kernel_ns()
get_kernel_ns() wants preemption disabled. It doesn't make a lot of sense
during the get/set ioctls (no way to make them non-racy) but the callee wants
it.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Sun, 3 Oct 2010 16:51:39 +0000 (18:51 +0200)]
KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address
Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong [Tue, 28 Sep 2010 09:03:14 +0000 (17:03 +0800)]
KVM: MMU: move access code parsing to FNAME(walk_addr) function
Move access code parsing from caller site to FNAME(walk_addr) function
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong [Mon, 27 Sep 2010 10:09:29 +0000 (18:09 +0800)]
KVM: MMU: audit: check whether have unsync sps after root sync
After root synced, all unsync sps are synced, this patch add a check to make
sure it's no unsync sps in VCPU's page table
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong [Mon, 27 Sep 2010 10:07:59 +0000 (18:07 +0800)]
KVM: MMU: audit: introduce audit_printk to cleanup audit code
Introduce audit_printk, and record audit point instead audit name
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong [Mon, 27 Sep 2010 10:07:07 +0000 (18:07 +0800)]
KVM: MMU: audit: unregister audit tracepoints before module unloaded
fix:
Call Trace:
[<
ffffffffa01e46ba>] ? kvm_mmu_pte_write+0x229/0x911 [kvm]
[<
ffffffffa01c6ba9>] ? gfn_to_memslot+0x39/0xa0 [kvm]
[<
ffffffffa01c6c26>] ? mark_page_dirty+0x16/0x2e [kvm]
[<
ffffffffa01c6d6f>] ? kvm_write_guest_page+0x67/0x7f [kvm]
[<
ffffffff81066fbd>] ? local_clock+0x2a/0x3b
[<
ffffffffa01d52ce>] emulator_write_phys+0x46/0x54 [kvm]
......
Code: Bad RIP value.
RIP [<
ffffffffa0172056>] 0xffffffffa0172056
RSP <
ffff880134f69a70>
CR2:
ffffffffa0172056
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong [Mon, 27 Sep 2010 10:06:16 +0000 (18:06 +0800)]
KVM: MMU: audit: fix vcpu's spte walking
After nested nested paging, it may using long mode to shadow 32/PAE paging
guest, so this patch fix it
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong [Mon, 27 Sep 2010 10:05:00 +0000 (18:05 +0800)]
KVM: MMU: set access bit for direct mapping
Set access bit while setup up direct page table if it's nonpaing or npt enabled,
it's good for CPU's speculate access
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong [Mon, 27 Sep 2010 10:03:27 +0000 (18:03 +0800)]
KVM: MMU: cleanup for error mask set while walk guest page table
Small cleanup for set page fault error code
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong [Mon, 27 Sep 2010 10:02:12 +0000 (18:02 +0800)]
KVM: MMU: update 'root_hpa' out of loop in PAE shadow path
The value of 'vcpu->arch.mmu.pae_root' is not modified, so we can update
'root_hpa' out of the loop.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Sheng Yang [Tue, 28 Sep 2010 08:33:32 +0000 (16:33 +0800)]
KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn()
Eliminate:
arch/x86/kvm/emulate.c:801: warning: ‘sv’ may be used uninitialized in this
function
on gcc 4.1.2
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Sun, 26 Sep 2010 11:00:53 +0000 (13:00 +0200)]
KVM: x86: Fix constant type in kvm_get_time_scale
Older gcc versions complain about the improper type (for x86-32), 4.5
seems to fix this silently. However, we should better use the right type
initially.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Jan Kiszka [Tue, 28 Sep 2010 14:37:42 +0000 (16:37 +0200)]
KVM: VMX: Add AX to list of registers clobbered by guest switch
By chance this caused no harm so far. We overwrite AX during switch
to/from guest context, so we must declare this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Arjan Koers [Mon, 2 Aug 2010 21:35:28 +0000 (23:35 +0200)]
KVM guest: Move a printk that's using the clock before it's ready
Fix a hang during SMP kernel boot on KVM that showed up
after commit
489fb490dbf8dab0249ad82b56688ae3842a79e8
(2.6.35) and
59aab522154a2f17b25335b63c1cf68a51fb6ae0
(2.6.34.1). The problem only occurs when
CONFIG_PRINTK_TIME is set.
KVM-Stable-Tag.
Signed-off-by: Arjan Koers <0h61vkll2ly8@xutrox.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Zachary Amsden [Sun, 19 Sep 2010 00:38:15 +0000 (14:38 -1000)]
KVM: x86: TSC catchup mode
Negate the effects of AN TYM spell while kvm thread is preempted by tracking
conversion factor to the highest TSC rate and catching the TSC up when it has
fallen behind the kernel view of time. Note that once triggered, we don't
turn off catchup mode.
A slightly more clever version of this is possible, which only does catchup
when TSC rate drops, and which specifically targets only CPUs with broken
TSC, but since these all are considered unstable_tsc(), this patch covers
all necessary cases.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Zachary Amsden [Sun, 19 Sep 2010 00:38:14 +0000 (14:38 -1000)]
KVM: x86: Rename timer function
This just changes some names to better reflect the usage they
will be given. Separated out to keep confusion to a minimum.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Zachary Amsden [Sun, 19 Sep 2010 00:38:13 +0000 (14:38 -1000)]
KVM: x86: Make math work for other scales
The math in kvm_get_time_scale relies on the fact that
NSEC_PER_SEC < 2^32. To use the same function to compute
arbitrary time scales, we must extend the first reduction
step to shrink the base rate to a 32-bit value, and
possibly reduce the scaled rate into a 32-bit as well.
Note we must take care to avoid an arithmetic overflow
when scaling up the tps32 value (this could not happen
with the fixed scaled value of NSEC_PER_SEC, but can
happen with scaled rates above 2^31.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avi Kivity [Tue, 21 Sep 2010 17:59:44 +0000 (19:59 +0200)]
KVM: cpu_relax() during spin waiting for reboot
It doesn't really matter, but if we spin, we should spin in a more relaxed
manner. This way, if something goes wrong at least it won't contribute to
global warming.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avi Kivity [Sun, 19 Sep 2010 12:34:08 +0000 (14:34 +0200)]
KVM: VMX: Respect interrupt window in big real mode
If an interrupt is pending, we need to stop emulation so we
can inject it.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Mohammed Gamal [Sun, 19 Sep 2010 12:34:07 +0000 (14:34 +0200)]
KVM: VMX: Emulated real mode interrupt injection
Replace the inject-as-software-interrupt hack we currently have with
emulated injection.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Mohammed Gamal [Sun, 19 Sep 2010 12:34:06 +0000 (14:34 +0200)]
KVM: Add kvm_inject_realmode_interrupt() wrapper
This adds a wrapper function kvm_inject_realmode_interrupt() around the
emulator function emulate_int_real() to allow real mode interrupt injection.
[avi: initialize operand and address sizes before emulating interrupts]
[avi: initialize rip for real mode interrupt injection]
[avi: clear interrupt pending flag after emulating interrupt injection]
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Mohammed Gamal [Sun, 19 Sep 2010 12:34:05 +0000 (14:34 +0200)]
KVM: x86 emulator: Expose emulate_int_real()
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Hillf Danton [Sat, 18 Sep 2010 00:41:02 +0000 (08:41 +0800)]
KVM: MMU: fix counting of rmap entries in rmap_add()
It seems that rmap entries are under counted.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiao Guangrong [Mon, 20 Sep 2010 14:17:48 +0000 (22:17 +0800)]
KVM: document 'kvm.mmu_audit' parameter
Document this parameter into Documentation/kernel-parameters.txt
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiao Guangrong [Mon, 20 Sep 2010 14:16:45 +0000 (22:16 +0800)]
KVM: fix the description of kvm-amd.nested in documentation
The default state of 'kvm-amd.nested' is enabled now, so fix the documentation
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Gleb Natapov [Mon, 20 Sep 2010 08:15:32 +0000 (10:15 +0200)]
KVM: SVM: do not generate "external interrupt exit" if other exit is pending
Nested SVM checks for external interrupt after injecting nested exception.
In case there is external interrupt pending the code generates "external
interrupt exit" and overwrites previous exit info. If previously injected
exception already generated exit it will be lost.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avi Kivity [Sun, 19 Sep 2010 16:44:07 +0000 (18:44 +0200)]
KVM: Convert PIC lock from raw spinlock to ordinary spinlock
The PIC code used to be called from preempt_disable() context, which
wasn't very good for PREEMPT_RT. That is no longer the case, so move
back from raw_spinlock_t to spinlock_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Zachary Amsden [Sun, 19 Sep 2010 00:38:12 +0000 (14:38 -1000)]
KVM: x86: Fix kvmclock bug
If preempted after kvmclock values are updated, but before hardware
virtualization is entered, the last tsc time as read by the guest is
never set. It underflows the next time kvmclock is updated if there
has not yet been a successful entry / exit into hardware virt.
Fix this by simply setting last_tsc to the newly read tsc value so
that any computed nsec advance of kvmclock is nulled.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Joerg Roedel [Tue, 14 Sep 2010 15:46:12 +0000 (17:46 +0200)]
KVM: MMU: Don't track nested fault info in error-code
This patch moves the detection whether a page-fault was
nested or not out of the error code and moves it into a
separate variable in the fault struct.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Thu, 22 Jul 2010 10:09:54 +0000 (13:09 +0300)]
KVM: VMX: Move fixup_rmode_irq() to avoid forward declaration
No code changes.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Tue, 20 Jul 2010 12:06:17 +0000 (15:06 +0300)]
KVM: Non-atomic interrupt injection
Change the interrupt injection code to work from preemptible, interrupts
enabled context. This works by adding a ->cancel_injection() operation
that undoes an injection in case we were not able to actually enter the guest
(this condition could never happen with atomic injection).
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Tue, 20 Jul 2010 11:43:23 +0000 (14:43 +0300)]
KVM: VMX: Parameterize vmx_complete_interrupts() for both exit and entry
Currently vmx_complete_interrupts() can decode event information from vmx
exit fields into the generic kvm event queues. Make it able to decode
the information from the entry fields as well by parametrizing it.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Thu, 22 Jul 2010 09:54:21 +0000 (12:54 +0300)]
KVM: VMX: Move real-mode interrupt injection fixup to vmx_complete_interrupts()
This allows reuse of vmx_complete_interrupts() for cancelling injections.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Tue, 20 Jul 2010 11:31:20 +0000 (14:31 +0300)]
KVM: VMX: Split up vmx_complete_interrupts()
vmx_complete_interrupts() does too much, split it up:
- vmx_vcpu_run() gets the "cache important vmcs fields" part
- a new vmx_complete_atomic_exit() gets the parts that must be done atomically
- a new vmx_recover_nmi_blocking() does what its name says
- vmx_complete_interrupts() retains the event injection recovery code
This helps in reducing the work done in atomic context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Tue, 27 Jul 2010 09:30:24 +0000 (12:30 +0300)]
KVM: Check for pending events before attempting injection
Instead of blindly attempting to inject an event before each guest entry,
check for a possible event first in vcpu->requests. Sites that can trigger
event injection are modified to set KVM_REQ_EVENT:
- interrupt, nmi window opening
- ppr updates
- i8259 output changes
- local apic irr changes
- rflags updates
- gif flag set
- event set on exit
This improves non-injecting entry performance, and sets the stage for
non-atomic injection.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Mon, 13 Sep 2010 14:45:28 +0000 (16:45 +0200)]
KVM: MMU: Fix regression with ept memory types merged into non-ept page tables
Commit "KVM: MMU: Make tdp_enabled a mmu-context parameter" made real-mode
set ->direct_map, and changed the code that merges in the memory type depend
on direct_map instead of tdp_enabled. However, in this case what really
matters is tdp, not direct_map, since tdp changes the pte format regardless
of whether the mapping is direct or not.
As a result, real-mode shadow mappings got corrupted with ept memory types.
The result was a huge slowdown, likely due to the cache being disabled.
Change it back as the simplest fix for the regression (real fix is to move
all that to vmx code, and not use tdp_enabled as a synonym for ept).
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Sun, 12 Sep 2010 14:39:11 +0000 (16:39 +0200)]
KVM: Document that KVM_GET_SUPPORTED_CPUID may return emulated values
Signed-off-by: Avi Kivity <avi@redhat.com>
Joerg Roedel [Fri, 10 Sep 2010 15:31:06 +0000 (17:31 +0200)]
KVM: X86: Report SVM bit to userspace only when supported
This patch fixes a bug in KVM where it _always_ reports the
support of the SVM feature to userspace. But KVM only
supports SVM on AMD hardware and only when it is enabled in
the kernel module. This patch fixes the wrong reporting.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Joerg Roedel [Fri, 10 Sep 2010 15:31:05 +0000 (17:31 +0200)]
KVM: SVM: Report Nested Paging support to userspace
This patch implements the reporting of the nested paging
feature support to userspace.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Joerg Roedel [Fri, 10 Sep 2010 15:31:04 +0000 (17:31 +0200)]
KVM: SVM: Expect two more candiates for exit_int_info
This patch adds INTR and NMI intercepts to the list of
expected intercepts with an exit_int_info set. While this
can't happen on bare metal it is architectural legal and may
happen with KVMs SVM emulation.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Joerg Roedel [Fri, 10 Sep 2010 15:31:03 +0000 (17:31 +0200)]
KVM: SVM: Initialize Nested Nested MMU context on VMRUN
This patch adds code to initialize the Nested Nested Paging
MMU context when the L1 guest executes a VMRUN instruction
and has nested paging enabled in its VMCB.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Joerg Roedel [Fri, 10 Sep 2010 15:31:02 +0000 (17:31 +0200)]
KVM: SVM: Implement MMU helper functions for Nested Nested Paging
This patch adds the helper functions which will be used in
the mmu context for handling nested nested page faults.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Joerg Roedel [Fri, 10 Sep 2010 15:31:01 +0000 (17:31 +0200)]
KVM: MMU: Track NX state in struct kvm_mmu
With Nested Paging emulation the NX state between the two
MMU contexts may differ. To make sure that always the right
fault error code is recorded this patch moves the NX state
into struct kvm_mmu so that the code can distinguish between
L1 and L2 NX state.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Joerg Roedel [Fri, 10 Sep 2010 15:31:00 +0000 (17:31 +0200)]
KVM: MMU: Allow long mode shadows for legacy page tables
Currently the KVM softmmu implementation can not shadow a 32
bit legacy or PAE page table with a long mode page table.
This is a required feature for nested paging emulation
because the nested page table must alway be in host format.
So this patch implements the missing pieces to allow long
mode page tables for page table types.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Joerg Roedel [Fri, 10 Sep 2010 15:30:59 +0000 (17:30 +0200)]
KVM: MMU: Refactor mmu_alloc_roots function
This patch factors out the direct-mapping paths of the
mmu_alloc_roots function into a seperate function. This
makes it a lot easier to avoid all the unnecessary checks
done in the shadow path which may break when running direct.
In fact, this patch already fixes a problem when running PAE
guests on a PAE shadow page table.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>