OSDN Git Service

uclinux-h8/linux.git
4 years agoMerge tag 'asoc-v5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Takashi Iwai [Thu, 7 Nov 2019 13:12:30 +0000 (14:12 +0100)]
Merge tag 'asoc-v5.5' of https://git./linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v5.5

Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.

 - Lots more cleanups from Morimoto-san.  Now that everything is a
   component this is mostly about refactorings to clarify and simplify
   the core, a combination of things that are no longer required due to
   refactorings and spotting similarities.
 - Many fixes to the Sound Open Firmware code.
 - Wake on voice support for Chromebooks.
 - SPI support for RT5677.
 - New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
   with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.

4 years agoASoC: SOF: topology: Fix bytes control size checks
Dragos Tarcatu [Wed, 6 Nov 2019 14:58:16 +0000 (08:58 -0600)]
ASoC: SOF: topology: Fix bytes control size checks

When using the example SOF amp widget topology, KASAN dumps this
when the AMP bytes kcontrol gets loaded:

[ 9.579548] BUG: KASAN: slab-out-of-bounds in
sof_control_load+0x8cc/0xac0 [snd_sof]
[ 9.588194] Write of size 40 at addr ffff8882314559dc by task
systemd-udevd/2411

Fix that by rejecting the topology if the bytes data size > max_size

Fixes: 311ce4fe7637d ("ASoC: SOF: Add support for loading topologies")
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoALSA: timer: Limit max amount of slave instances
Takashi Iwai [Wed, 6 Nov 2019 15:42:57 +0000 (16:42 +0100)]
ALSA: timer: Limit max amount of slave instances

The fuzzer tries to open the timer instances as much as possible, and
this may cause a system hiccup easily.  We've already introduced the
cap for the max number of available instances for the h/w timers, and
we should put such a limit also to the slave timers, too.

This patch introduces the limit to the multiple opened slave timers.
The upper limit is hard-coded to 1000 for now, which should suffice
for any practical usages up to now.

Link: https://lore.kernel.org/r/20191106154257.5853-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoMerge branch 'for-5.4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Mark Brown [Wed, 6 Nov 2019 16:29:34 +0000 (16:29 +0000)]
Merge branch 'for-5.4' of https://git./linux/kernel/git/broonie/sound into asoc-5.5

4 years agoASoC: soc-core: fixup dead-lock at snd_soc_unregister_component()
Kuninori Morimoto [Wed, 6 Nov 2019 07:05:05 +0000 (16:05 +0900)]
ASoC: soc-core: fixup dead-lock at snd_soc_unregister_component()

snd_soc_unregister_component() is calling snd_soc_lookup_component()
under mutex_lock(). But, snd_soc_lookup_component() itself is using
mutex_lock(), thus it will be dead-lock.
This patch adds _nolocked version of it, and avoid dead-lock issue.

Fixes: ac6a4dd3e9f0("ASoC: soc-core: use snd_soc_lookup_component() at snd_soc_unregister_component()")
Reported-by: "kernelci.org bot" <bot@kernelci.org>"
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bltph4da.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: fix RIP warning on card removal
Pierre-Louis Bossart [Wed, 6 Nov 2019 14:58:01 +0000 (08:58 -0600)]
ASoC: soc-core: fix RIP warning on card removal

SOF module load/unload tests show nasty recurring warnings:

WARNING: CPU: 5 PID: 1339 at sound/core/control.c:466
snd_ctl_remove+0xf0/0x100 [snd]
RIP: 0010:snd_ctl_remove+0xf0/0x100 [snd]

This regression was introduced by the removal of the call to
soc_remove_link_components() before soc_card_free() is invoked.

Go back to the initial order but only call
soc_remove_link_components() once.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Fixes: 5a4c9f054ceea ("ASoC: soc-core: snd_soc_unbind_card() cleanup")
GitHub issue: https://github.com/thesofproject/linux/issues/1424
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191106145801.9316-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: SOF: topology: Fix bytes control size checks
Dragos Tarcatu [Wed, 6 Nov 2019 14:58:16 +0000 (08:58 -0600)]
ASoC: SOF: topology: Fix bytes control size checks

When using the example SOF amp widget topology, KASAN dumps this
when the AMP bytes kcontrol gets loaded:

[ 9.579548] BUG: KASAN: slab-out-of-bounds in
sof_control_load+0x8cc/0xac0 [snd_sof]
[ 9.588194] Write of size 40 at addr ffff8882314559dc by task
systemd-udevd/2411

Fix that by rejecting the topology if the bytes data size > max_size

Fixes: 311ce4fe7637d ("ASoC: SOF: Add support for loading topologies")
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoALSA: docs: Remove snd_dma_pci_data() usage in documentation
Takashi Iwai [Tue, 5 Nov 2019 15:18:56 +0000 (16:18 +0100)]
ALSA: docs: Remove snd_dma_pci_data() usage in documentation

The macro will be removed soon later, so update the documentation to
reflect that as well.

Link: https://lore.kernel.org/r/20191105151856.10785-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: pci: Avoid non-standard macro usage
Takashi Iwai [Tue, 5 Nov 2019 15:18:55 +0000 (16:18 +0100)]
ALSA: pci: Avoid non-standard macro usage

Pass the device pointer from the PCI pointer directly, instead of a
non-standard macro.  The macro didn't give any better readability.

Link: https://lore.kernel.org/r/20191105151856.10785-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: rme: Avoid non-standard macro usage
Takashi Iwai [Tue, 5 Nov 2019 15:18:54 +0000 (16:18 +0100)]
ALSA: rme: Avoid non-standard macro usage

Pass the device pointer from the PCI pointer directly, instead of a
non-standard macro.  The macro didn't give any better readability.

Along with it, drop the unnecessary assignment before the
snd_dma_alloc_pages() call and simplify by returning the error code
directly.

Link: https://lore.kernel.org/r/20191105151856.10785-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: es1968: Avoid non-standard macro usage
Takashi Iwai [Tue, 5 Nov 2019 15:18:53 +0000 (16:18 +0100)]
ALSA: es1968: Avoid non-standard macro usage

Pass the device pointer from the PCI pointer directly, instead of a
non-standard macro.  The macro didn't give any better readability.

Along with it, the unneeded assignment before snd_dma_alloc_pages*()
call is dropped.

Link: https://lore.kernel.org/r/20191105151856.10785-22-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: echoaudio: Avoid non-standard macro usage
Takashi Iwai [Tue, 5 Nov 2019 15:18:52 +0000 (16:18 +0100)]
ALSA: echoaudio: Avoid non-standard macro usage

Pass the device pointer from the PCI pointer directly, instead of a
non-standard macro.  The macro didn't give any better readability.

Also slightly refactor the code (drop the return value check from the
preallocation) as it never returns an error.

Link: https://lore.kernel.org/r/20191105151856.10785-21-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: aoa: Avoid non-standard macro usage
Takashi Iwai [Tue, 5 Nov 2019 15:18:51 +0000 (16:18 +0100)]
ALSA: aoa: Avoid non-standard macro usage

Pass the device pointer from the PCI pointer directly, instead of a
non-standard macro.  The macro didn't give any better readability.

Link: https://lore.kernel.org/r/20191105151856.10785-20-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: pci: Drop superfluous snd_pcm_sgbuf_ops_page
Takashi Iwai [Tue, 5 Nov 2019 15:18:50 +0000 (16:18 +0100)]
ALSA: pci: Drop superfluous snd_pcm_sgbuf_ops_page

snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM
page ops since the recent change in the PCM core (*).  Leaving it NULL
should work as long as the preallocation has been done properly.

This patch drops the redundant lines.

(*) 7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
                  default mmap handler

Link: https://lore.kernel.org/r/20191105151856.10785-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: mips: Convert to the common vmalloc memalloc
Takashi Iwai [Tue, 5 Nov 2019 15:18:49 +0000 (16:18 +0100)]
ALSA: mips: Convert to the common vmalloc memalloc

The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling.  This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
                  support
    7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
                  default mmap handler

Link: https://lore.kernel.org/r/20191105151856.10785-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: pdaudiocf: Convert to the common vmalloc memalloc
Takashi Iwai [Tue, 5 Nov 2019 15:18:48 +0000 (16:18 +0100)]
ALSA: pdaudiocf: Convert to the common vmalloc memalloc

The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling.  This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
                  support
    7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
                  default mmap handler

Since the driver requires the DMA32 allocation, it passes the
specially encoded device to snd_pcm_lib_preallocate_pages().

Link: https://lore.kernel.org/r/20191105151856.10785-17-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: vx: Convert to the common vmalloc memalloc
Takashi Iwai [Tue, 5 Nov 2019 15:18:47 +0000 (16:18 +0100)]
ALSA: vx: Convert to the common vmalloc memalloc

The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling.  This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
                  support
    7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
                  default mmap handler

Since the driver requires the DMA32 allocation, it passes the
specially encoded device to snd_pcm_lib_preallocate_pages().

Link: https://lore.kernel.org/r/20191105151856.10785-16-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: ua101: Convert to the common vmalloc memalloc
Takashi Iwai [Tue, 5 Nov 2019 15:18:46 +0000 (16:18 +0100)]
ALSA: ua101: Convert to the common vmalloc memalloc

The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling.  This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
                  support
    7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
                  default mmap handler

Link: https://lore.kernel.org/r/20191105151856.10785-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: hiface: Convert to the common vmalloc memalloc
Takashi Iwai [Tue, 5 Nov 2019 15:18:45 +0000 (16:18 +0100)]
ALSA: hiface: Convert to the common vmalloc memalloc

The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling.  This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
                  support
    7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
                  default mmap handler

Link: https://lore.kernel.org/r/20191105151856.10785-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: caiaq: Convert to the common vmalloc memalloc
Takashi Iwai [Tue, 5 Nov 2019 15:18:44 +0000 (16:18 +0100)]
ALSA: caiaq: Convert to the common vmalloc memalloc

The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling.  This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
                  support
    7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
                  default mmap handler

Link: https://lore.kernel.org/r/20191105151856.10785-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: 6fire: Convert to the common vmalloc memalloc
Takashi Iwai [Tue, 5 Nov 2019 15:18:43 +0000 (16:18 +0100)]
ALSA: 6fire: Convert to the common vmalloc memalloc

The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling.  This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
                  support
    7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
                  default mmap handler

Link: https://lore.kernel.org/r/20191105151856.10785-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: firewire: Convert to the common vmalloc memalloc
Takashi Iwai [Tue, 5 Nov 2019 15:18:42 +0000 (16:18 +0100)]
ALSA: firewire: Convert to the common vmalloc memalloc

The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling.  This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
                  support
    7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
                  default mmap handler

Link: https://lore.kernel.org/r/20191105151856.10785-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: aloop: Convert to the common vmalloc memalloc
Takashi Iwai [Tue, 5 Nov 2019 15:18:41 +0000 (16:18 +0100)]
ALSA: aloop: Convert to the common vmalloc memalloc

The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling.  This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
                  support
    7e8edae39fd1: ALSA: pcm: Handle special page
                  mapping in the default mmap handler

Link: https://lore.kernel.org/r/20191105151856.10785-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: usb-audio: Convert to the common vmalloc memalloc
Takashi Iwai [Tue, 5 Nov 2019 15:18:40 +0000 (16:18 +0100)]
ALSA: usb-audio: Convert to the common vmalloc memalloc

The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling.  This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
                  support
    7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
                  default mmap handler

Also, since the SG-buffer-specific PCM ops becomes identical with the
normal PCM ops, unify them again to the single ops, too.

Link: https://lore.kernel.org/r/20191105151856.10785-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: 6fire: Drop the dead code
Takashi Iwai [Tue, 5 Nov 2019 15:18:39 +0000 (16:18 +0100)]
ALSA: 6fire: Drop the dead code

A few error handling code was forgotten where it never reaches.
Drop it.

Link: https://lore.kernel.org/r/20191105151856.10785-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: usb: Remove superfluous snd_dma_continuous_data()
Takashi Iwai [Tue, 5 Nov 2019 15:18:38 +0000 (16:18 +0100)]
ALSA: usb: Remove superfluous snd_dma_continuous_data()

The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINUOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.

Link: https://lore.kernel.org/r/20191105151856.10785-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: sparc: Remove superfluous snd_dma_continuous_data()
Takashi Iwai [Tue, 5 Nov 2019 15:18:37 +0000 (16:18 +0100)]
ALSA: sparc: Remove superfluous snd_dma_continuous_data()

The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINUOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.

Link: https://lore.kernel.org/r/20191105151856.10785-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: sh: Remove superfluous snd_dma_continuous_data()
Takashi Iwai [Tue, 5 Nov 2019 15:18:36 +0000 (16:18 +0100)]
ALSA: sh: Remove superfluous snd_dma_continuous_data()

The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINUOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.

Link: https://lore.kernel.org/r/20191105151856.10785-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: rme32: Remove superfluous snd_dma_continuous_data()
Takashi Iwai [Tue, 5 Nov 2019 15:18:35 +0000 (16:18 +0100)]
ALSA: rme32: Remove superfluous snd_dma_continuous_data()

The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINUOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.

Link: https://lore.kernel.org/r/20191105151856.10785-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: mips: Remove superfluous snd_dma_continuous_data()
Takashi Iwai [Tue, 5 Nov 2019 15:18:34 +0000 (16:18 +0100)]
ALSA: mips: Remove superfluous snd_dma_continuous_data()

The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINUOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.

Link: https://lore.kernel.org/r/20191105151856.10785-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: drivers: Remove superfluous snd_dma_continuous_data()
Takashi Iwai [Tue, 5 Nov 2019 15:18:33 +0000 (16:18 +0100)]
ALSA: drivers: Remove superfluous snd_dma_continuous_data()

The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINUOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.

Link: https://lore.kernel.org/r/20191105151856.10785-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: pcm: Create proc files only for non-empty preallocations
Takashi Iwai [Tue, 5 Nov 2019 19:10:07 +0000 (20:10 +0100)]
ALSA: pcm: Create proc files only for non-empty preallocations

It makes little sense to create prealloc proc files for streams that
have the zero max size, which is a typical case for vmalloc buffers.
Skip the proc file creations to save resources in such a case.

Link: https://lore.kernel.org/r/20191105191007.18150-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: pcm: Warn if doubly preallocated
Takashi Iwai [Tue, 5 Nov 2019 19:10:06 +0000 (20:10 +0100)]
ALSA: pcm: Warn if doubly preallocated

Warn if snd_pcm_lib_preallocate_pages*() is applied to the stream that
has already the preallocated buffers and skip the allocation.  It's a
clearly a driver bug.

Link: https://lore.kernel.org/r/20191105191007.18150-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: docs: Update documentation about SG- and vmalloc-buffers
Takashi Iwai [Tue, 5 Nov 2019 08:01:38 +0000 (09:01 +0100)]
ALSA: docs: Update documentation about SG- and vmalloc-buffers

The recent changes simplified the required setup for SG- and vmalloc-
buffers.  Update the documentation accordingly.

Link: https://lore.kernel.org/r/20191105080138.1260-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: pcm: Handle special page mapping in the default mmap handler
Takashi Iwai [Tue, 5 Nov 2019 08:01:37 +0000 (09:01 +0100)]
ALSA: pcm: Handle special page mapping in the default mmap handler

When a driver needs to deal with a special buffer like a SG or a
vmalloc buffer, it has to set up the PCM page ops explicitly for the
corresponding helper function.  This is rather error-prone and many
people forgot or incorrectly used it.

For simplifying the call patterns and avoiding such a potential bug,
this patch enhances the PCM default mmap handler to check the
(pre-)allocated buffer type and handles the page gracefully depending
on the buffer type.  If the PCM page ops is given, the ops is still
used in a higher priority.  The new code path is only for the default
(NULL page ops) case.

Link: https://lore.kernel.org/r/20191105080138.1260-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: memalloc: Add vmalloc buffer allocation support
Takashi Iwai [Tue, 5 Nov 2019 08:01:36 +0000 (09:01 +0100)]
ALSA: memalloc: Add vmalloc buffer allocation support

This patch adds the vmalloc buffer support to ALSA memalloc core.  A
new type, SNDRV_DMA_TYPE_VMALLOC was added.

The vmalloc buffer has been already supported in the PCM via a few own
helper functions, but the user sometimes get confused and misuse
them.  With this patch, the whole buffer management is integrated into
the memalloc core, so they can be used in a sole common way.

Link: https://lore.kernel.org/r/20191105080138.1260-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINUOUS type
Takashi Iwai [Tue, 5 Nov 2019 08:01:35 +0000 (09:01 +0100)]
ALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINUOUS type

Currently we pass the artificial device pointer to the allocation
helper in the case of SNDRV_DMA_TYPE_CONTINUOUS for passing the GFP
flags.  But all common cases are the allocations with GFP_KERNEL, and
it's messy to put this in each place.

In this patch, the memalloc core helper is changed to accept the NULL
device pointer and it treats as the default mode, GFP_KERNEL, so that
all callers can omit the complex argument but just leave NULL.

Link: https://lore.kernel.org/r/20191105080138.1260-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoASoC: soc.h: dobj is used only when SND_SOC_TOPOLOGY
Kuninori Morimoto [Tue, 5 Nov 2019 06:47:26 +0000 (15:47 +0900)]
ASoC: soc.h: dobj is used only when SND_SOC_TOPOLOGY

snd_soc_dobj is used only when SND_SOC_TOPOLOGY was selected.
Let's enable it under SND_SOC_TOPOLOGY.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8xq251d.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: remove topology specific operation
Kuninori Morimoto [Tue, 5 Nov 2019 06:47:22 +0000 (15:47 +0900)]
ASoC: soc-core: remove topology specific operation

soc-core has some API which is used from topology, but it is doing
topology specific operation at soc-core.
soc-core should care about core things, and topology should care
about topology things, otherwise, it is very confusable.

For example topology type is not related to soc-core,
it is topology side issue.

This patch removes meaningless check from soc-core.

This patch keeps extra initialization/destruction at
snd_soc_add_dai_link() / snd_soc_remove_dai_link()
which were for topology.
From this patch, non-topology card can use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pni6251h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: call snd_soc_register_dai() from snd_soc_register_dais()
Kuninori Morimoto [Tue, 5 Nov 2019 06:47:18 +0000 (15:47 +0900)]
ASoC: soc-core: call snd_soc_register_dai() from snd_soc_register_dais()

ALSA SoC has 2 functions.
snd_soc_register_dai()  is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()

In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.

This patch calls snd_soc_register_dai() from snd_soc_register_dais()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r22m251l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: don't call snd_soc_dapm_new_dai_widgets() at snd_soc_register_dai()
Kuninori Morimoto [Tue, 5 Nov 2019 06:47:14 +0000 (15:47 +0900)]
ASoC: soc-core: don't call snd_soc_dapm_new_dai_widgets() at snd_soc_register_dai()

ALSA SoC has 2 functions.
snd_soc_register_dai()  is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()

In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.

snd_soc_register_dai() is now used from topology.
But to reduce duplicated code, it should be used from _dais(), too.

Because of topology side specific reason,
it is calling snd_soc_dapm_new_dai_widgets(),
but it is not needed _dais() side.

This patch factorizes snd_soc_register_dai() to
topology / _dais() common part, and topology specific part.
And do topology specific part at soc-topology.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sgn2251p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: have legacy_dai_naming at snd_soc_register_dai()
Kuninori Morimoto [Tue, 5 Nov 2019 06:47:09 +0000 (15:47 +0900)]
ASoC: soc-core: have legacy_dai_naming at snd_soc_register_dai()

ALSA SoC has 2 functions.
snd_soc_register_dai()  is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()

In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.

snd_soc_register_dai() is now used from topology.
But to reduce duplicated code, it should be used from _dais(), too.
To prepare it, this patch adds missing parameter legacy_dai_naming
to snd_soc_register_dai().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tv7i251u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: add snd_soc_unregister_dai()
Kuninori Morimoto [Tue, 5 Nov 2019 06:47:04 +0000 (15:47 +0900)]
ASoC: soc-core: add snd_soc_unregister_dai()

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and is difficult to debug.

This patch adds missing soc_del_dai() and snd_soc_unregister_dai().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9ry251z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: move snd_soc_unregister_dais()
Kuninori Morimoto [Tue, 5 Nov 2019 06:47:00 +0000 (15:47 +0900)]
ASoC: soc-core: move snd_soc_unregister_dais()

This patch moves snd_soc_unregister_dais() next to
snd_soc_register_dais().
This is prepare for snd_soc_register_dais() cleanup

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87woce2524.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: move snd_soc_register_dai()
Kuninori Morimoto [Tue, 5 Nov 2019 06:46:55 +0000 (15:46 +0900)]
ASoC: soc-core: move snd_soc_register_dai()

This patch moves snd_soc_register_dai() next to
snd_soc_register_dais().
This is prepare for snd_soc_register_dais() cleanup.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87y2wu2528.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: use snd_soc_lookup_component() at snd_soc_unregister_component()
Kuninori Morimoto [Tue, 5 Nov 2019 06:46:51 +0000 (15:46 +0900)]
ASoC: soc-core: use snd_soc_lookup_component() at snd_soc_unregister_component()

snd_soc_unregister_component() is now finding component manually,
but we already have snd_soc_lookup_component() to find component;
Let's use existing function.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87zhha252c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: remove snd_soc_component_add/del()
Kuninori Morimoto [Tue, 5 Nov 2019 06:46:45 +0000 (15:46 +0900)]
ASoC: soc-core: remove snd_soc_component_add/del()

soc-core has
snd_soc_add_component(), snd_soc_component_add(),
snd_soc_del_component(), snd_soc_component_del().

These are very confusing naming.
snd_soc_component_xxx() are called from snd_soc_xxx_component(),
and these are very small.
Let's merge these into snd_soc_xxx_component(), and
remove snd_soc_component_xxx().

Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rum3jmy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: add snd_soc_del_component_unlocked()
Kuninori Morimoto [Tue, 5 Nov 2019 06:46:39 +0000 (15:46 +0900)]
ASoC: soc-core: add snd_soc_del_component_unlocked()

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and is difficult to debug.

Now ALSA SoC has snd_soc_add_component(), but there is no paired
snd_soc_del_component(). Thus, snd_soc_unregister_component() is
calling cleanup function randomly. it is difficult to read.
This patch adds missing snd_soc_del_component_unlocked() and
balance up code.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/8736f23jn4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: tidyup snd_soc_lookup_component()
Kuninori Morimoto [Tue, 5 Nov 2019 06:46:35 +0000 (15:46 +0900)]
ASoC: soc-core: tidyup snd_soc_lookup_component()

snd_soc_lookup_component() is using mix of continue and break
in the same loop. It is odd.
This patch cleanup it.

Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874kzi3jn8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: move snd_soc_lookup_component()
Kuninori Morimoto [Tue, 5 Nov 2019 06:46:30 +0000 (15:46 +0900)]
ASoC: soc-core: move snd_soc_lookup_component()

This patch moves snd_soc_lookup_component() to upper side.
This is prepare for snd_soc_unregister_component()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/875zjy3jnd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: add soc_unbind_dai_link()
Kuninori Morimoto [Tue, 5 Nov 2019 06:46:25 +0000 (15:46 +0900)]
ASoC: soc-core: add soc_unbind_dai_link()

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.

ALSA SoC has soc_bind_dai_link(), but its paired soc_unbind_dai_link()
is not implemented.
More confusable is that soc_remove_pcm_runtimes() which should be
soc_unbind_dai_link() is implemented without synchronised
to soc_bind_dai_link().

This patch cleanup this unbalance.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/877e4e3jni.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: call soc_bind_dai_link() under snd_soc_add_dai_link()
Kuninori Morimoto [Tue, 5 Nov 2019 06:46:20 +0000 (15:46 +0900)]
ASoC: soc-core: call soc_bind_dai_link() under snd_soc_add_dai_link()

If we focus to soc_bind_dai_link() at snd_soc_instantiate_card(),
we will notice very complex operation.

static int snd_soc_instantiate_card(...)
{
...
/*
 * (1) Bind dai_link via card pre-linked dai_link
 *
 * Bind dai_link via card pre-linked.
 * 1 dai_link will be 1 rtd, and connected to card.
 * for_each_card_prelinks() is for card pre-linked dai_link.
 *
 * Image
 *
 * card
 * - rtd(A)
 * - rtd(A)
 */
for_each_card_prelinks(card, i, dai_link) {
ret = soc_bind_dai_link(card, dai_link);
...
}
...
/*
 * (2) Connect card pre-linked dai_link to card list
 *
 * Connect all card pre-linked dai_link to *card list*.
 * Here, (A) means from card pre-linked.
 *
 * Image
 *
 * card card list
 *  - rtd(A)  - dai_link(A)
 *  - rtd(A)  - dai_link(A)
 *  - ...  - ...
 */
for_each_card_prelinks(card, i, dai_link) {
ret = snd_soc_add_dai_link(card, dai_link);
...
}
...
/*
 * (3) Probe binded component
 *
 * Each rtd has many components.
 * Here probes each rtd connected components.
 * rtd(A) in Image is the probe target.
 *
 * During this component probe, topology may add new dai_link to
 * *card list* by using snd_soc_add_dai_link() which is
 * used at (2).
 * Here, (B) means from topology
 *
 * Image
 *
 * card card list
 *  - rtd(A)  - dai_link(A)
 *  - rtd(A)  - dai_link(A)
 *  - ...  - ...
 *  - dai_link(B)
 *  - dai_link(B)
 */
ret = soc_probe_link_components(card);
...

/*
 * (4) Bind dai_link again
 *
 * Bind dai_link again for topology.
 * Note, (1) used for_each_card_prelinks(),
 * here is using  for_each_card_links()
 *
 * This means from card list.
 * As Image indicating, it has dai_link(A) (from card pre-link)
 * and dai_link(B) (from topology).
 * main target here is dai_link(B).
 * soc_bind_dai_link() ignores already used
 * dai_link (= dai_link(A))
 *
 * Image
 *
 * card card list
 *  - rtd(A)  - dai_link(A)
 *  - rtd(A)  - dai_link(A)
 *  - ...  - ...
 *  - rtd(B)  - dai_link(B)
 *  - rtd(B)  - dai_link(B)
 */
for_each_card_links(card, dai_link) {
ret = soc_bind_dai_link(card, dai_link);
...
}
...
}

As you see above, it is doing very complex method.
The problem is binding dai_link via "card pre-linked" (= (1)) and
"topology added dai_link" (= (3)) are separated.
The code can be simple if we can bind dai_link when dai_link
is connected to *card list*.
This patch do it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878sou3jnn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: remove duplicated soc_is_dai_link_bound()
Kuninori Morimoto [Tue, 5 Nov 2019 06:46:15 +0000 (15:46 +0900)]
ASoC: soc-core: remove duplicated soc_is_dai_link_bound()

soc_is_dai_link_bound() check will be called both
*before* soc_bind_dai_link() (A), and
*under*  soc_bind_dai_link() (B).
These are very verbose code. Let's remove one of them.

* static int soc_bind_dai_link(...)
{
...
(B) if (soc_is_dai_link_bound(...)) {
...
return 0;
}
...
}

static int snd_soc_instantiate_card(...)
{
...
for_each_card_links(...) {
(A) if (soc_is_dai_link_bound(...))
continue;

* ret = soc_bind_dai_link(...);
if (ret)
goto probe_end;
}
...
}

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a79a3jns.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: typo fix at soc_dai_link_sanity_check()
Kuninori Morimoto [Tue, 5 Nov 2019 06:46:00 +0000 (15:46 +0900)]
ASoC: soc-core: typo fix at soc_dai_link_sanity_check()

Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87bltq3jo7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: tidyup soc_init_dai_link()
Kuninori Morimoto [Tue, 5 Nov 2019 06:45:50 +0000 (15:45 +0900)]
ASoC: soc-core: tidyup soc_init_dai_link()

soc_init_dai_link() is needed to be called before soc_bind_dai_link().

int snd_soc_instantiate_card()
{
for_each_card_prelinks(...) {
(1) ret = soc_init_dai_link(...);
...
}
...
for_each_card_prelinks(...) {
(2) ret = soc_bind_dai_link(...);
...
}
...
for_each_card_links(...) {
...
(A) ret = soc_init_dai_link(...);
...
(B) ret = soc_bind_dai_link(...);
}
...

(1) is for (2), and (A) is for (B)
(1) and (2) are for card prelink   dai_link.
(A) and (B) are for topology added dai_link.

soc_init_dai_link() is sanity check for dai_link, not initializing today.
Therefore, it is confusable naming. We can rename it as sanity_check.

And this check is for soc_bind_dai_link().
It can be more simple code if we can call it from soc_bind_dai_link().

This patch renames it to soc_dai_link_sanity_check(), and
call it from soc_bind_dai_link().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87d0e63joh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: move soc_init_dai_link()
Kuninori Morimoto [Tue, 5 Nov 2019 06:45:41 +0000 (15:45 +0900)]
ASoC: soc-core: move soc_init_dai_link()

This patch moves soc_init_dai_link() next to soc_bind_dai_link().
This is prepare for soc_bind_dai_link() cleanup.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87eeym3joq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: adau7118: Fix example warning
Maxime Ripard [Tue, 5 Nov 2019 10:56:15 +0000 (11:56 +0100)]
ASoC: adau7118: Fix example warning

The ADAU7118 has an example where the codec has an i2c address of 14, and
the unit address set to 14 as well.

However, while the address is expressed in decimal, the unit-address is
supposed to be in hexadecimal, which ends up with two different addresses
that trigger a DTC warning. Fix this by setting the address to 0x14.

Cc: Nuno Sá <nuno.sa@analog.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 969d49b2cdc8 ("dt-bindings: asoc: Add ADAU7118 documentation")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191105105615.21391-1-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: SOF: topology: set trigger order for FE DAI link
Ranjani Sridharan [Mon, 4 Nov 2019 22:48:12 +0000 (14:48 -0800)]
ASoC: SOF: topology: set trigger order for FE DAI link

Set trigger order for FE DAI links to SND_SOC_DPCM_TRIGGER_POST
to trigger the BE DAI's before the FE DAI's. This prevents the
xruns seen on playback pipelines using the link DMA.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191104224812.3393-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: pcm: update FE/BE trigger order based on the command
Ranjani Sridharan [Mon, 4 Nov 2019 22:48:11 +0000 (14:48 -0800)]
ASoC: pcm: update FE/BE trigger order based on the command

Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST
determine the order in which FE DAI and BE DAI are triggered.
In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is
triggered before the BE DAI and in the case of
SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before
the FE DAI. And this order remains the same irrespective of the
trigger command.

In the case of the SOF driver, during playback, the FW
expects the BE DAI to be triggered before the FE DAI during
the START trigger. The BE DAI trigger handles the starting of
Link DMA and so it must be started before the FE DAI is started
to prevent xruns during pause/release. This can be addressed
by setting the trigger order for the FE dai link to
SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger,
the FW expects the FE DAI to be triggered before the BE DAI.
Retaining the same order during the START and STOP commands,
results in FW error as the DAI component in the FW is still
active.

The issue can be fixed by mirroring the trigger order of
FE and BE DAI's during the START and STOP trigger. So, with the
trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be
trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME
and the BE DAI will be triggered first during the
STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order
set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered
first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands
and the FE DAI will be triggered first during the
SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191104224812.3393-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: max98373: replace gpio_request with devm_gpio_request
Yong Zhi [Mon, 4 Nov 2019 22:09:59 +0000 (16:09 -0600)]
ASoC: max98373: replace gpio_request with devm_gpio_request

Use devm_gpio_request() to automatic unroll when fails and avoid
resource leaks at error paths.

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/1572905399-22402-1-git-send-email-yong.zhi@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: stm32: sai: add restriction on mmap support
Olivier Moysan [Mon, 4 Nov 2019 13:36:54 +0000 (14:36 +0100)]
ASoC: stm32: sai: add restriction on mmap support

Do not support mmap in S/PDIF mode. In S/PDIF mode
the buffer has to be copied, to allow the channel status
bits insertion.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191104133654.28750-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoALSA: hda: Disable regmap internal locking
Takashi Iwai [Tue, 5 Nov 2019 08:18:06 +0000 (09:18 +0100)]
ALSA: hda: Disable regmap internal locking

Since we apply the own mutex (bus->cmd_mutex) in HDA core side, the
internal locking in regmap is superfluous.  This patch adds the flag
to indicate that.

Also, an infamous side-effect by this change is that it disables the
regmap debugfs, too, and this is seen rather good; the regmap debugfs
isn't quite useful for HD-audio as it provides the very sparse
registers and its debugfs access tends to lead to the way too high
resource usages or sometimes hang up.  So it'd be rather safe to
disable it altogether.

Link: https://lore.kernel.org/r/2029139028.10333037.1572874551626.JavaMail.zimbra@redhat.com
Link: https://lore.kernel.org/r/20191105081806.4896-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoASoC: Intel: boards: sof_rt5682: use dependency on SOF_HDA_LINK
Pierre-Louis Bossart [Fri, 1 Nov 2019 17:30:45 +0000 (12:30 -0500)]
ASoC: Intel: boards: sof_rt5682: use dependency on SOF_HDA_LINK

The wrong dependency is used and the build can be broken

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: Intel: boards: Geminilake is only supported by SOF
Pierre-Louis Bossart [Fri, 1 Nov 2019 17:30:44 +0000 (12:30 -0500)]
ASoC: Intel: boards: Geminilake is only supported by SOF

Geminilake machine drivers are only tested and recommended with SOF.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: Intel: boards: fix configs for bxt-da7219-max98057a
Pierre-Louis Bossart [Fri, 1 Nov 2019 17:30:43 +0000 (12:30 -0500)]
ASoC: Intel: boards: fix configs for bxt-da7219-max98057a

The same driver is reused for 3 different configurations, but the
driver will only be build if ApolloLake is selected.

Fix and make sure each device can work without dependencies on others
(useful for minimal configurations).

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: Intel: boards: remove select SND_HDA_DSP_LOADER
Pierre-Louis Bossart [Fri, 1 Nov 2019 17:30:42 +0000 (12:30 -0500)]
ASoC: Intel: boards: remove select SND_HDA_DSP_LOADER

This option is only required with the Skylake platform driver, there
is no reason to have this option in machine drivers. This is
e.g. useless for SOF-based solutions.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: Intel: Skylake: mark HDAudio codec support as deprecated.
Pierre-Louis Bossart [Fri, 1 Nov 2019 17:30:41 +0000 (12:30 -0500)]
ASoC: Intel: Skylake: mark HDAudio codec support as deprecated.

This option famously broke audio on Linus' laptop and the problem have
not been fixed.

Mark as DEPRECATED to avoid any ambiguity with distros.

Use SOF if you need HDaudio support w/ the DSP enabled, e.g. for DMIC
capture.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: SOF: Intel: use def_tristate, avoid using select
Pierre-Louis Bossart [Fri, 1 Nov 2019 17:30:40 +0000 (12:30 -0500)]
ASoC: SOF: Intel: use def_tristate, avoid using select

So far we used select to use the relevant built-in/module options, but
this led to blurring layers between core and Intel Kconfigs.

Use def_tristate works just as well and removes Intel stuff from the code.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency
Pierre-Louis Bossart [Fri, 1 Nov 2019 17:30:39 +0000 (12:30 -0500)]
ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency

updated solution to the problem reported with randconfig:

CONFIG_SND_SOC_SOF_IMX depends on CONFIG_SND_SOC_SOF, but is in
turn referenced by the sof-of-dev driver. This creates a reverse
dependency that manifests in a link error when CONFIG_SND_SOC_SOF_OF
is built-in but CONFIG_SND_SOC_SOF_IMX=m:

sound/soc/sof/sof-of-dev.o:(.data+0x118): undefined reference to `sof_imx8_ops'

use def_trisate to propagate the right settings without select.

Fixes: f4df4e4042b0 ("ASoC: SOF: imx8: Fix COMPILE_TEST error")
Fixes: 202acc565a1f ("ASoC: SOF: imx: Add i.MX8 HW support")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: SOF: Kconfig: add EXPERT dependency for developer options, clarify help
Pierre-Louis Bossart [Fri, 1 Nov 2019 17:30:38 +0000 (12:30 -0500)]
ASoC: SOF: Kconfig: add EXPERT dependency for developer options, clarify help

Some distros select all possible options, despite existing warnings to
be careful. This leads to e.g. user reports that the HDaudio codec and
DMIC are not handled by SOF.

Add an explicit menu item to unlock developer options, and make them
dependent on CONFIG_EXPERT. Hopefully with this double-lock these
options will only be selected by developers.

GitHub issue: https://github.com/thesofproject/sof/issues/1885
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: Intel: add mutual exclusion between SOF and legacy Baytrail driver
Pierre-Louis Bossart [Fri, 1 Nov 2019 17:30:37 +0000 (12:30 -0500)]
ASoC: Intel: add mutual exclusion between SOF and legacy Baytrail driver

This legacy driver is already deprecated, let's make sure there is no
conflict with SOF.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: SOF: Intel: Broadwell: clarify mutual exclusion with legacy driver
Pierre-Louis Bossart [Fri, 1 Nov 2019 17:30:36 +0000 (12:30 -0500)]
ASoC: SOF: Intel: Broadwell: clarify mutual exclusion with legacy driver

Some distros select all options blindly, which leads to confusion and
bug reports. SOF does not fully support Broadwell due to firmware
dependencies, the machine drivers can only support one option, and
UCM/topology files are still being propagated to downstream distros,
so make SOF on Broadwell an opt-in option that first require distros
to opt-out of existing defaults.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204237
Fixes: f35bf70f61d3 ('ASoC: Intel: Make sure BDW based machine drivers build for SOF')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: SOF: Intel: Baytrail: clarify mutual exclusion with Atom/SST driver
Pierre-Louis Bossart [Fri, 1 Nov 2019 17:30:35 +0000 (12:30 -0500)]
ASoC: SOF: Intel: Baytrail: clarify mutual exclusion with Atom/SST driver

Some distros select all options blindly, which leads to confusion and
bug reports. Since SOF does not support Baytrail-CR for now, and
UCM/topology files are still being propagated to downstream distros,
make SOF on Baytrail an opt-in option that first require distros to
opt-out of existing defaults.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: SOF: Intel: hda: Simplify the hda_dsp_wait_d0i3c_done() function
Ranjani Sridharan [Fri, 1 Nov 2019 17:09:16 +0000 (12:09 -0500)]
ASoC: SOF: Intel: hda: Simplify the hda_dsp_wait_d0i3c_done() function

Remove the retry argument for the hda_dsp_wait_d0i3c_done()
function and use the HDA_DSP_REG_POLL_RETRY_COUNT macro
directly.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101170916.26517-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: Intel: boards: Add CML m/c using RT1011 and RT5682
Naveen Manohar [Fri, 1 Nov 2019 17:18:47 +0000 (12:18 -0500)]
ASoC: Intel: boards: Add CML m/c using RT1011 and RT5682

Machine driver to enable
RT5682 on SSP0, DMIC, HDMI and
RT1011 AMP on SSP1 with
2 CH / 24 bit TDM Playback over 4 individual codecs and
4 CH / 24 bit Capture to provide feedback.

Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101171847.26767-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: Intel: Add acpi match for rt1011 based m/c driver
Naveen Manohar [Fri, 1 Nov 2019 17:18:46 +0000 (12:18 -0500)]
ASoC: Intel: Add acpi match for rt1011 based m/c driver

Add match for CML m/c with RT1011 and RT5682

Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101171847.26767-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: ux500: Remove redundant variable "status"
zhong jiang [Thu, 31 Oct 2019 13:34:15 +0000 (21:34 +0800)]
ASoC: ux500: Remove redundant variable "status"

local variable "status" is not used. hence it is safe to remove and
just return 0.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Link: https://lore.kernel.org/r/1572528855-25990-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: hdac_hda: fix race in device removal
Kai Vehmanen [Fri, 1 Nov 2019 17:06:35 +0000 (12:06 -0500)]
ASoC: hdac_hda: fix race in device removal

When ASoC card instance is removed containing a HDA codec,
hdac_hda_codec_remove() may run in parallel with codec resume.
This will cause problems if the HDA link is freed with
snd_hdac_ext_bus_link_put() while the codec is still in
middle of its resume process.

To fix this, change the order such that pm_runtime_disable()
is called before the link is freed. This will ensure any
pending runtime PM action is completed before proceeding
to free the link.

This issue can be easily hit with e.g. SOF driver by loading and
unloading the drivers.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101170635.26389-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoALSA: pcm: Fix missing check of the new non-cached buffer type
Takashi Iwai [Mon, 4 Nov 2019 10:11:15 +0000 (11:11 +0100)]
ALSA: pcm: Fix missing check of the new non-cached buffer type

The check for the mmap support via hw_support_mmap() function misses
the case where the device is with SNDRV_DMA_TYPE_DEV_UC, which should
have been treated equally as SNDRV_DMA_TYPE_DEV.  Let's fix it.

Note that this bug doesn't hit any practical problem, because
SNDRV_DMA_TYPE_DEV_UC is used only for x86-specific drivers
(snd-hda-intel and snd-intel8x0) for the specific platforms that need
the non-cached buffers.  And, on such platforms, hw_support_mmap()
already returns true in anyway.  That's the reason I didn't put
Cc-to-stable mark here.  This is only for any theoretical future
extension.

Fixes: 425da159707b ("ALSA: pcm: use dma_can_mmap() to check if a device supports dma_mmap_*")
Fixes: 42e748a0b325 ("ALSA: memalloc: Add non-cached buffer type")
Link: https://lore.kernel.org/r/20191104101115.27311-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: bebob: link the order of establishing connections and Syt-match clock mode
Takashi Sakamoto [Fri, 1 Nov 2019 13:13:23 +0000 (22:13 +0900)]
ALSA: bebob: link the order of establishing connections and Syt-match clock mode

Originally BeBeB ASICs and firmware supports clock mode to synchronizing
to syt field of received isoc packet. This mode is known as 'SYT Match'
slightly described in IEC 61883-6 (but no detail mechanisms). In this
mode, drivers can control sampling clock in device. Driver for Windows
and macOS uses this feature to perform synchronization for devices
on the same bus.

In this mode, a plug of Music subunit for synchronization is connected
to a plug of isoc unit for incoming packet streaming, then the order to
establish connections is INPUT_PLUG first, OUTPUT_PLUG second.

This commit implements the above.

Actually each device works with its own clock for sampling, therefore
the original design is hardly implemented to vendor's products.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191101131323.17300-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: bebob: expand delay of start for IR context just for version 3 firmware
Takashi Sakamoto [Fri, 1 Nov 2019 13:13:22 +0000 (22:13 +0900)]
ALSA: bebob: expand delay of start for IR context just for version 3 firmware

As long as I investigated, there's some cases about the delay for device
between establishing OUTPUT_PLUG and transmitting first isoc packet. For
devices which support BeBoB protocol version 1 can transmit the packet
within several hundred milliseconds, while for devices which support
BeBoB protocol version 3 can transmit the packet within 2 seconds.

Devices with protocol version 1:
 * Edirol FA-66
 * Yamaha GO46
 * Terratec Phase x24 FW
 * M-Audio FireWire AudioPhile
 * M-Audio FireWire Solo
 * M-Audio FireWire 1814
 * M-Audio FireWire 410
 * Focusrite Saffire Pro 26 I/O

Devices with protocol version 3:
 * M-Audio Profire Lightbridge
 * Behringer FCA610
 * Phonic Firefly 202

At present ALSA bebob driver postpones starting IR context during
1.5 sec for all of supported devices. The delay is too long for
devices with protocol version 1, while it's not enough for devices with
protocol version 3.

This commit improves the delay for these protocols.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191101131323.17300-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: bebob: expand sleep just after breaking connections for protocol version 1
Takashi Sakamoto [Fri, 1 Nov 2019 13:13:21 +0000 (22:13 +0900)]
ALSA: bebob: expand sleep just after breaking connections for protocol version 1

As long as I investigated, some devices with BeBoB protocol version 1
can be freezed during several hundreds milliseconds after breaking
connections. When accessing during the freezed time, any transaction
is corrupted. In the worst case, the device is going to reboot.

I can see this issue in:
 * Roland FA-66
 * M-Audio FireWire Solo

This commit expands sleep just after breaking connections to avoid
the freezed time as much as possible. I note that the freeze/reboot
behaviour is similar to below models:
 * Focusrite Saffire Pro 10 I/O
 * Focusrite Saffire Pro 26 I/O

The above models certainly reboot after breaking connections.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191101131323.17300-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoASoC: rt1011: some minor changes to improve readability
Shuming Fan [Thu, 31 Oct 2019 11:54:46 +0000 (19:54 +0800)]
ASoC: rt1011: some minor changes to improve readability

There is no other code use the RT1011_INIT_REG_LEN definition,
except rt1011_reg_init().
Hence, we remove it and fix the typo.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115446.21108-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: rt1011: add the range check for temperature_calib from device property
Shuming Fan [Thu, 31 Oct 2019 11:54:36 +0000 (19:54 +0800)]
ASoC: rt1011: add the range check for temperature_calib from device property

The driver will check the range for temperature_calib.
It should be from 1 to 255.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115436.21055-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: rt1011: remove unnecessary tabs using spaces instead
Shuming Fan [Thu, 31 Oct 2019 11:54:25 +0000 (19:54 +0800)]
ASoC: rt1011: remove unnecessary tabs using spaces instead

There are unnecessary tabs inside some statements.
It uses sapces instead.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115425.21003-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: rt1011: improve the rt1011_set_dai_fmt() function
Shuming Fan [Thu, 31 Oct 2019 11:54:14 +0000 (19:54 +0800)]
ASoC: rt1011: improve the rt1011_set_dai_fmt() function

If there is a wrong format setting,
the driver will goto the end of the function directly.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115414.20951-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: rt1011: remove redundant code in kcontrol
Shuming Fan [Thu, 31 Oct 2019 11:54:01 +0000 (19:54 +0800)]
ASoC: rt1011: remove redundant code in kcontrol

The !component->card->instantiated statement should remove in kcontrol.
It is no need to check the card->instantiated in kcontrol.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115401.20898-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: dt-bindings: rt5682: add button delay device property
Shuming Fan [Wed, 30 Oct 2019 08:55:56 +0000 (16:55 +0800)]
ASoC: dt-bindings: rt5682: add button delay device property

The btndet-delay device property could control the HW debounce time.
It is easy to adjust the sensitivity of push button.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191030085556.14351-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: rt5682: improve the sensitivity of push button
Shuming Fan [Wed, 30 Oct 2019 08:55:33 +0000 (16:55 +0800)]
ASoC: rt5682: improve the sensitivity of push button

The sensitivity could improve by decreasing the HW debounce time
and reduce the delay time of workequeue.
This patch added a device property for HW debounce time control.
We could change this value to tune the sensitivity of push button.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191030085533.14299-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: soc-core: remove unneeded snd_soc_tplg_component_remove()
Kuninori Morimoto [Wed, 30 Oct 2019 01:26:10 +0000 (10:26 +0900)]
ASoC: soc-core: remove unneeded snd_soc_tplg_component_remove()

snd_soc_tplg_component_remove() is pair of snd_soc_tplg_component_load(),
and it is topology related cleanup function.

The driver which called _load() needs to call _remove() by its responsibility.
Today, skl-pcm and topology are the user, and these are calling both
_load() and _remove().

soc-core doesn't need to call it.
This patch remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736fbdnwt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoASoC: rt5677-spi: fixup compile warning
Kuninori Morimoto [Wed, 30 Oct 2019 06:14:58 +0000 (15:14 +0900)]
ASoC: rt5677-spi: fixup compile warning

This patch fixup this warning

LINUX/sound/soc/codecs/rt5677-spi.c: In function ‘rt5677_spi_pcm_close’:
LINUX/sound/soc/codecs/rt5677-spi.c:114:30: warning: unused variable ‘rtd’ [-Wunused-variable]
  struct snd_soc_pcm_runtime *rtd = substream->private_data;
                              ^~~

Fixes: a0e0d135427c ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a79idajh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 years agoALSA: firewire-motu: Correct a typo in the clock proc string
Takashi Iwai [Wed, 30 Oct 2019 10:09:21 +0000 (11:09 +0100)]
ALSA: firewire-motu: Correct a typo in the clock proc string

Just fix a typo of "S/PDIF" in the clock name string.

Fixes: 4638ec6ede08 ("ALSA: firewire-motu: add proc node to show current statuc of clock and packet formats")
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030100921.3826-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: firewire-motu: add support for MOTU UltraLite
Takashi Sakamoto [Wed, 30 Oct 2019 08:06:44 +0000 (17:06 +0900)]
ALSA: firewire-motu: add support for MOTU UltraLite

UltraLite was shipped in 2005 by MOTU, and already discontinued. This
model consists of below ICs:

- Texus Instruments TSB41AB2 for physical layer of IEEE 1394 bus
- Xilinx Spartan XC35S200 for link layer of IEEE 1394 bus, protocol layer
  and signal processing

This commit adds support for this model. Like the other MOTU models,
ALSA firewire MOTU driver fails to drive the device for stable sampling
clock and generate noisy sound.

$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  04107574  bus_info_length 4, crc_length 16, crc 30068
404  31333934  bus_name "1394"
408  20001000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c  0001f200  company_id 0001f2     |
410  0007b82d  device_id 000007b82d  | EUI-64 0001f2000007b82d

               root directory
               -----------------------------------------------------------------
414  0004c65c  directory_length 4, crc 50780
418  030001f2  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  8d000006  --> eui-64 leaf at 438
424  d1000001  --> unit directory at 428

               unit directory at 428
               -----------------------------------------------------------------
428  0003d80a  directory_length 3, crc 55306
42c  120001f2  specifier id
430  1300000d  version
434  17100800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  00024566  leaf_length 2, crc 17766
43c  0001f200  company_id 0001f2     |
440  0007b82d  device_id 000007b82d  | EUI-64 0001f2000007b82d

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: firewire-motu: code refactoring to handle model specific switch for protocol v2
Takashi Sakamoto [Wed, 30 Oct 2019 08:06:43 +0000 (17:06 +0900)]
ALSA: firewire-motu: code refactoring to handle model specific switch for protocol v2

In MOTU FireWire series, devices which support protocol version 2 have
several types of hardware design to process audio data frames for isoc
packet. Roughly devices are categorized into three groups:
 - 828mkII
 - Traveler/896HD
 - UltraLite/8pre FireWire

Some bit flags in register addressed by 0x'ffff'f000'0b14
includes device-specific effects.

This commit cleanups implementation of protocol v2 in this point.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: firewire-motu: minor code refactoring for protocol version 2
Takashi Sakamoto [Wed, 30 Oct 2019 08:06:42 +0000 (17:06 +0900)]
ALSA: firewire-motu: minor code refactoring for protocol version 2

This commit adds some helper functions to parse register value for
source of sampling clock and nominal sampling transmission frequency.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: firewire-motu: detect SPH source of sampling clock
Takashi Sakamoto [Wed, 30 Oct 2019 08:06:41 +0000 (17:06 +0900)]
ALSA: firewire-motu: detect SPH source of sampling clock

In MOTU FireWire series, devices have a mode to generate sampling clock
from a sequence of source packet header (SPH) included in each data block
of received packet. This mode is used for several purposes such as mode
for SMPTE time code, sync to the other sound cards and so on.

This commit adds support for the SPH mode.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: firewire-motu: print for unknown source of sampling clock
Takashi Sakamoto [Wed, 30 Oct 2019 08:06:40 +0000 (17:06 +0900)]
ALSA: firewire-motu: print for unknown source of sampling clock

When unknown source is detected for sampling clock, corresponding label
was not added for node on procfs.

This commit adds it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: firewire-motu: fix wrong spelling for macro
Takashi Sakamoto [Wed, 30 Oct 2019 08:06:39 +0000 (17:06 +0900)]
ALSA: firewire-motu: fix wrong spelling for macro

Just replace 'SEPARETED' with 'SEPARATED' for macro.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoALSA: usb-audio: sound: usb: usb true/false for bool return type
Saurav Girepunje [Tue, 29 Oct 2019 17:52:00 +0000 (23:22 +0530)]
ALSA: usb-audio: sound: usb: usb true/false for bool return type

Use true/false for bool type return in uac_clock_source_is_valid().

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/20191029175200.GA7320@saurav
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoASoC: Intel: bxt_rt298: common hdmi codec support
Kai Vehmanen [Tue, 29 Oct 2019 13:40:17 +0000 (15:40 +0200)]
ASoC: Intel: bxt_rt298: common hdmi codec support

Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>