OSDN Git Service
Steffen Maier [Thu, 17 May 2018 17:14:45 +0000 (19:14 +0200)]
scsi: zfcp: fix misleading REC trigger trace where erp_action setup failed
commit
512857a795cbbda5980efa4cdb3c0b6602330408 upstream.
If a SCSI device is deleted during scsi_eh host reset, we cannot get a
reference to the SCSI device anymore since scsi_device_get returns !=0 by
design. Assuming the recovery of adapter and port(s) was successful,
zfcp_erp_strategy_followup_success() attempts to trigger a LUN reset for the
half-gone SCSI device. Unfortunately, it causes the following confusing
trace record which states that zfcp will do a LUN recovery as "ERP need" is
ZFCP_ERP_ACTION_REOPEN_LUN == 1 and equals "ERP want".
Old example trace record formatted with zfcpdbf from s390-tools:
Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded
LUN : 0x<FCP_LUN>
WWPN : 0x<WWPN>
D_ID : 0x<N_Port-ID>
Adapter status : 0x5400050b
Port status : 0x54000001
LUN status : 0x40000000 ZFCP_STATUS_COMMON_RUNNING
but not ZFCP_STATUS_COMMON_UNBLOCKED as it
was closed on close part of adapter reopen
ERP want : 0x01
ERP need : 0x01 misleading
However, zfcp_erp_setup_act() returns NULL as it cannot get the reference.
Hence, zfcp_erp_action_enqueue() takes an early goto out and _NO_ recovery
actually happens.
We always do want the recovery trigger trace record even if no erp_action
could be enqueued as in this case. For other cases where we did not enqueue
an erp_action, 'need' has always been zero to indicate this. In order to
indicate above goto out, introduce an eyecatcher "flag" to mark the "ERP
need" as 'not needed' but still keep the information which erp_action type,
that zfcp_erp_required_act() had decided upon, is needed. 0xc_ is chosen to
be visibly different from 0x0_ in "ERP want".
New example trace record formatted with zfcpdbf from s390-tools:
Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded
LUN : 0x<FCP_LUN>
WWPN : 0x<WWPN>
D_ID : 0x<N_Port-ID>
Adapter status : 0x5400050b
Port status : 0x54000001
LUN status : 0x40000000
ERP want : 0x01
ERP need : 0xc1 would need LUN ERP, but no action set up
^
Before v2.6.38 commit
ae0904f60fab ("[SCSI] zfcp: Redesign of the debug
tracing for recovery actions.") we could detect this case because the
"erp_action" field in the trace was NULL. The rework removed erp_action as
argument and field from the trace.
This patch here is for tracing. A fix to allow LUN recovery in the case at
hand is a topic for a separate patch.
See also commit
fdbd1c5e27da ("[SCSI] zfcp: Allow running unit/LUN shutdown
without acquiring reference") for a similar case and background info.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes:
ae0904f60fab ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steffen Maier [Thu, 17 May 2018 17:14:44 +0000 (19:14 +0200)]
scsi: zfcp: fix missing SCSI trace for retry of abort / scsi_eh TMF
commit
81979ae63e872ef650a7197f6ce6590059d37172 upstream.
We already have a SCSI trace for the end of abort and scsi_eh TMF. Due to
zfcp_erp_wait() and fc_block_scsi_eh() time can pass between the start of
our eh callback and an actual send/recv of an abort / TMF request. In order
to see the temporal sequence including any abort / TMF send retries, add a
trace before the above two blocking functions. This supports problem
determination with scsi_eh and parallel zfcp ERP.
No need to explicitly trace the beginning of our eh callback, since we
typically can send an abort / TMF and see its HBA response (in the worst
case, it's a pseudo response on dismiss all of adapter recovery, e.g. due to
an FSF request timeout [fsrth_1] of the abort / TMF). If we cannot send, we
now get a trace record for the first "abrt_wt" or "[lt]r_wait" which denotes
almost the beginning of the callback.
No need to explicitly trace the wakeup after the above two blocking
functions because the next retry loop causes another trace in any case and
that is sufficient.
Example trace records formatted with zfcpdbf from s390-tools:
Timestamp : ...
Area : SCSI
Subarea : 00
Level : 1
Exception : -
CPU ID : ..
Caller : 0x...
Record ID : 1
Tag : abrt_wt abort, before zfcp_erp_wait()
Request ID : 0x0000000000000000 none (invalid)
SCSI ID : 0x<scsi_id>
SCSI LUN : 0x<scsi_lun>
SCSI LUN high : 0x<scsi_lun_high>
SCSI result : 0x<scsi_result_of_cmd_to_be_aborted>
SCSI retries : 0x<retries_of_cmd_to_be_aborted>
SCSI allowed : 0x<allowed_retries_of_cmd_to_be_aborted>
SCSI scribble : 0x<req_id_of_cmd_to_be_aborted>
SCSI opcode : <CDB_of_cmd_to_be_aborted>
FCP rsp inf cod: 0x.. none (invalid)
FCP rsp IU : ... none (invalid)
Timestamp : ...
Area : SCSI
Subarea : 00
Level : 1
Exception : -
CPU ID : ..
Caller : 0x...
Record ID : 1
Tag : lr_wait LUN reset, before zfcp_erp_wait()
Request ID : 0x0000000000000000 none (invalid)
SCSI ID : 0x<scsi_id>
SCSI LUN : 0x<scsi_lun>
SCSI LUN high : 0x<scsi_lun_high>
SCSI result : 0x... unrelated
SCSI retries : 0x.. unrelated
SCSI allowed : 0x.. unrelated
SCSI scribble : 0x... unrelated
SCSI opcode : ... unrelated
FCP rsp inf cod: 0x.. none (invalid)
FCP rsp IU : ... none (invalid)
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes:
63caf367e1c9 ("[SCSI] zfcp: Improve reliability of SCSI eh handlers in zfcp")
Fixes:
af4de36d911a ("[SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steffen Maier [Thu, 17 May 2018 17:14:43 +0000 (19:14 +0200)]
scsi: zfcp: fix missing SCSI trace for result of eh_host_reset_handler
commit
df30781699f53e4fd4c494c6f7dd16e3d5c21d30 upstream.
For problem determination we need to see whether and why we were successful
or not. This allows deduction of scsi_eh escalation.
Example trace record formatted with zfcpdbf from s390-tools:
Timestamp : ...
Area : SCSI
Subarea : 00
Level : 1
Exception : -
CPU ID : ..
Caller : 0x...
Record ID : 1
Tag : schrh_r SCSI host reset handler result
Request ID : 0x0000000000000000 none (invalid)
SCSI ID : 0xffffffff none (invalid)
SCSI LUN : 0xffffffff none (invalid)
SCSI LUN high : 0xffffffff none (invalid)
SCSI result : 0x00002002 field re-used for midlayer value: SUCCESS
or in other cases: 0x2009 == FAST_IO_FAIL
SCSI retries : 0xff none (invalid)
SCSI allowed : 0xff none (invalid)
SCSI scribble : 0xffffffffffffffff none (invalid)
SCSI opcode :
ffffffff ffffffff ffffffff ffffffff none (invalid)
FCP rsp inf cod: 0xff none (invalid)
FCP rsp IU :
00000000 00000000 00000000 00000000 none (invalid)
00000000 00000000
v2.6.35 commit
a1dbfddd02d2 ("[SCSI] zfcp: Pass return code from
fc_block_scsi_eh to scsi eh") introduced the first return with something
other than the previously hardcoded single SUCCESS return path.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes:
a1dbfddd02d2 ("[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Himanshu Madhani [Mon, 4 Jun 2018 05:09:53 +0000 (22:09 -0700)]
scsi: qla2xxx: Fix setting lower transfer speed if GPSC fails
commit
413c2f33489b134e3cc65d9c3ff7861e8fdfe899 upstream.
This patch prevents driver from setting lower default speed of 1 GB/sec,
if the switch does not support Get Port Speed Capabilities (GPSC)
command. Setting this default speed results into much lower write
performance for large sequential WRITE. This patch modifies driver to
check for gpsc_supported flags and prevents driver from issuing
MBC_SET_PORT_PARAM (001Ah) to set default speed of 1 GB/sec. If driver
does not send this mailbox command, firmware assumes maximum supported
link speed and will operate at the max speed.
Cc: stable@vger.kernel.org
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reported-by: Eda Zhou <ezhou@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kelly [Mon, 26 Mar 2018 21:27:51 +0000 (14:27 -0700)]
iio:buffer: make length types match kfifo types
commit
c043ec1ca5baae63726aae32abbe003192bc6eec upstream.
Currently, we use int for buffer length and bytes_per_datum. However,
kfifo uses unsigned int for length and size_t for element size. We need
to make sure these matches or we will have bugs related to overflow (in
the range between INT_MAX and UINT_MAX for length, for example).
In addition, set_bytes_per_datum uses size_t while bytes_per_datum is an
int, which would cause bugs for large values of bytes_per_datum.
Change buffer length to use unsigned int and bytes_per_datum to use
size_t.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[bwh: Backported to 4.4:
- Drop change to iio_dma_buffer_set_length()
- Adjust filename, context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Sandoval [Tue, 22 May 2018 22:02:12 +0000 (15:02 -0700)]
Btrfs: fix clone vs chattr NODATASUM race
commit
b5c40d598f5408bd0ca22dfffa82f03cd9433f23 upstream.
In btrfs_clone_files(), we must check the NODATASUM flag while the
inodes are locked. Otherwise, it's possible that btrfs_ioctl_setflags()
will change the flags after we check and we can end up with a party
checksummed file.
The race window is only a few instructions in size, between the if and
the locks which is:
3834 if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode))
3835 return -EISDIR;
where the setflags must be run and toggle the NODATASUM flag (provided
the file size is 0). The clone will block on the inode lock, segflags
takes the inode lock, changes flags, releases log and clone continues.
Not impossible but still needs a lot of bad luck to hit unintentionally.
Fixes:
0e7b824c4ef9 ("Btrfs: don't make a file partly checksummed through file clone")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ adjusted for 4.4 ]
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Geert Uytterhoeven [Fri, 22 Jun 2018 14:33:57 +0000 (16:33 +0200)]
time: Make sure jiffies_to_msecs() preserves non-zero time periods
commit
abcbcb80cd09cd40f2089d912764e315459b71f7 upstream.
For the common cases where 1000 is a multiple of HZ, or HZ is a multiple of
1000, jiffies_to_msecs() never returns zero when passed a non-zero time
period.
However, if HZ > 1000 and not an integer multiple of 1000 (e.g. 1024 or
1200, as used on alpha and DECstation), jiffies_to_msecs() may return zero
for small non-zero time periods. This may break code that relies on
receiving back a non-zero value.
jiffies_to_usecs() does not need such a fix: one jiffy can only be less
than one µs if HZ >
1000000, and such large values of HZ are already
rejected at build time, twice:
- include/linux/jiffies.h does #error if HZ >= 12288,
- kernel/time/time.c has BUILD_BUG_ON(HZ > USEC_PER_SEC).
Broken since forever.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-alpha@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622143357.7495-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Tue, 12 Jun 2018 09:54:42 +0000 (17:54 +0800)]
MIPS: io: Add barrier after register read in inX()
commit
18f3e95b90b28318ef35910d21c39908de672331 upstream.
While a barrier is present in the outX() functions before the register
write, a similar barrier is missing in the inX() functions after the
register read. This could allow memory accesses following inX() to
observe stale data.
This patch is very similar to commit
a1cc7034e33d12dc1 ("MIPS: io: Add
barrier after register read in readX()"). Because war_io_reorder_wmb()
is both used by writeX() and outX(), if readX() need a barrier then so
does inX().
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Patchwork: https://patchwork.linux-mips.org/patch/19516/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Wed, 23 May 2018 22:14:39 +0000 (17:14 -0500)]
PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume
commit
13c65840feab8109194f9490c9870587173cb29d upstream.
After a suspend/resume cycle the Presence Detect or Data Link Layer Status
Changed bits might be set. If we don't clear them those events will not
fire anymore and nothing happens for instance when a device is now
hot-unplugged.
Fix this by clearing those bits in a newly introduced function
pcie_reenable_notification(). This should be fine because immediately
after, we check if the adapter is still present by reading directly from
the status register.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tokunori Ikegami [Sun, 3 Jun 2018 14:02:01 +0000 (23:02 +0900)]
MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum
commit
2a027b47dba6b77ab8c8e47b589ae9bbc5ac6175 upstream.
The erratum and workaround are described by BCM5300X-ES300-RDS.pdf as
below.
R10: PCIe Transactions Periodically Fail
Description: The BCM5300X PCIe does not maintain transaction ordering.
This may cause PCIe transaction failure.
Fix Comment: Add a dummy PCIe configuration read after a PCIe
configuration write to ensure PCIe configuration access
ordering. Set ES bit of CP0 configu7 register to enable
sync function so that the sync instruction is functional.
Resolution: hndpci.c: extpci_write_config()
hndmips.c: si_mips_init()
mipsinc.h CONF7_ES
This is fixed by the CFE MIPS bcmsi chipset driver also for BCM47XX.
Also the dummy PCIe configuration read is already implemented in the
Linux BCMA driver.
Enable ExternalSync in Config7 when CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
too so that the sync instruction is externalised.
Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19461/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joakim Tjernlund [Wed, 6 Jun 2018 10:13:30 +0000 (12:13 +0200)]
mtd: cfi_cmdset_0002: Avoid walking all chips when unlocking.
commit
f1ce87f6080b1dda7e7b1eda3da332add19d87b9 upstream.
cfi_ppb_unlock() walks all flash chips when unlocking sectors,
avoid walking chips unaffected by the unlock operation.
Fixes:
1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joakim Tjernlund [Wed, 6 Jun 2018 10:13:29 +0000 (12:13 +0200)]
mtd: cfi_cmdset_0002: Fix unlocking requests crossing a chip boudary
commit
0cd8116f172eed018907303dbff5c112690eeb91 upstream.
The "sector is in requested range" test used to determine whether
sectors should be re-locked or not is done on a variable that is reset
everytime we cross a chip boundary, which can lead to some blocks being
re-locked while the caller expect them to be unlocked.
Fix the check to make sure this cannot happen.
Fixes:
1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joakim Tjernlund [Wed, 6 Jun 2018 10:13:28 +0000 (12:13 +0200)]
mtd: cfi_cmdset_0002: fix SEGV unlocking multiple chips
commit
5fdfc3dbad099281bf027a353d5786c09408a8e5 upstream.
cfi_ppb_unlock() tries to relock all sectors that were locked before
unlocking the whole chip.
This locking used the chip start address + the FULL offset from the
first flash chip, thereby forming an illegal address. Fix that by using
the chip offset(adr).
Fixes:
1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joakim Tjernlund [Wed, 6 Jun 2018 10:13:27 +0000 (12:13 +0200)]
mtd: cfi_cmdset_0002: Use right chip in do_ppb_xxlock()
commit
f93aa8c4de307069c270b2d81741961162bead6c upstream.
do_ppb_xxlock() fails to add chip->start when querying for lock status
(and chip_ready test), which caused false status reports.
Fix that by adding adr += chip->start and adjust call sites
accordingly.
Fixes:
1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tokunori Ikegami [Wed, 30 May 2018 09:32:26 +0000 (18:32 +0900)]
mtd: cfi_cmdset_0002: Change write buffer to check correct value
commit
dfeae1073583dc35c33b32150e18b7048bbb37e6 upstream.
For the word write it is checked if the chip has the correct value.
But it is not checked for the write buffer as only checked if ready.
To make sure for the write buffer change to check the value.
It is enough as this patch is only checking the last written word.
Since it is described by data sheets to check the operation status.
Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Cc: linux-mtd@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Tue, 29 May 2018 11:56:14 +0000 (14:56 +0300)]
RDMA/mlx4: Discard unknown SQP work requests
commit
6b1ca7ece15e94251d1d0d919f813943e4a58059 upstream.
There is no need to crash the machine if unknown work request was
received in SQP MAD.
Cc: <stable@vger.kernel.org> # 3.6
Fixes:
37bfc7c1e83f ("IB/mlx4: SR-IOV multiplex and demultiplex MADs")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Marciniszyn [Sat, 19 May 2018 00:07:01 +0000 (17:07 -0700)]
IB/qib: Fix DMA api warning with debug kernel
commit
0252f73334f9ef68868e4684200bea3565a4fcee upstream.
The following error occurs in a debug build when running MPI PSM:
[ 307.415911] WARNING: CPU: 4 PID: 23867 at lib/dma-debug.c:1158
check_unmap+0x4ee/0xa20
[ 307.455661] ib_qib 0000:05:00.0: DMA-API: device driver failed to check map
error[device address=0x00000000df82b000] [size=4096 bytes] [mapped as page]
[ 307.517494] Modules linked in:
[ 307.531584] ib_isert iscsi_target_mod ib_srpt target_core_mod rpcrdma
sunrpc ib_srp scsi_transport_srp scsi_tgt ib_iser libiscsi ib_ipoib
scsi_transport_iscsi rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm
ib_qib intel_powerclamp coretemp rdmavt intel_rapl iosf_mbi kvm_intel kvm
irqbypass crc32_pclmul ghash_clmulni_intel ipmi_ssif ib_core aesni_intel sg
ipmi_si lrw gf128mul dca glue_helper ipmi_devintf iTCO_wdt gpio_ich hpwdt
iTCO_vendor_support ablk_helper hpilo acpi_power_meter cryptd ipmi_msghandler
ie31200_edac shpchp pcc_cpufreq lpc_ich pcspkr ip_tables xfs libcrc32c sd_mod
crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops ttm ahci crct10dif_pclmul crct10dif_common
drm crc32c_intel libahci tg3 libata serio_raw ptp i2c_core
[ 307.846113] pps_core dm_mirror dm_region_hash dm_log dm_mod
[ 307.866505] CPU: 4 PID: 23867 Comm: mpitests-IMB-MP Kdump: loaded Not
tainted 3.10.0-862.el7.x86_64.debug #1
[ 307.911178] Hardware name: HP ProLiant DL320e Gen8, BIOS J05 11/09/2013
[ 307.944206] Call Trace:
[ 307.956973] [<
ffffffffbd9e915b>] dump_stack+0x19/0x1b
[ 307.982201] [<
ffffffffbd2a2f58>] __warn+0xd8/0x100
[ 308.005999] [<
ffffffffbd2a2fdf>] warn_slowpath_fmt+0x5f/0x80
[ 308.034260] [<
ffffffffbd5f667e>] check_unmap+0x4ee/0xa20
[ 308.060801] [<
ffffffffbd41acaa>] ? page_add_file_rmap+0x2a/0x1d0
[ 308.090689] [<
ffffffffbd5f6c4d>] debug_dma_unmap_page+0x9d/0xb0
[ 308.120155] [<
ffffffffbd4082e0>] ? might_fault+0xa0/0xb0
[ 308.146656] [<
ffffffffc07761a5>] qib_tid_free.isra.14+0x215/0x2a0 [ib_qib]
[ 308.180739] [<
ffffffffc0776bf4>] qib_write+0x894/0x1280 [ib_qib]
[ 308.210733] [<
ffffffffbd540b00>] ? __inode_security_revalidate+0x70/0x80
[ 308.244837] [<
ffffffffbd53c2b7>] ? security_file_permission+0x27/0xb0
[ 308.266025] qib_ib0.8006: multicast join failed for
ff12:401b:8006:0000:0000:0000:ffff:ffff, status -22
[ 308.323421] [<
ffffffffbd46f5d3>] vfs_write+0xc3/0x1f0
[ 308.347077] [<
ffffffffbd492a5c>] ? fget_light+0xfc/0x510
[ 308.372533] [<
ffffffffbd47045a>] SyS_write+0x8a/0x100
[ 308.396456] [<
ffffffffbd9ff355>] system_call_fastpath+0x1c/0x21
The code calls a qib_map_page() which has never correctly tested for a
mapping error.
Fix by testing for pci_dma_mapping_error() in all cases and properly
handling the failure in the caller.
Additionally, streamline qib_map_page() arguments to satisfy just
the single caller.
Cc: <stable@vger.kernel.org>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Tested-by: Don Dutile <ddutile@redhat.com>
Reviewed-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan M Schaeckeler [Mon, 21 May 2018 23:26:14 +0000 (16:26 -0700)]
of: unittest: for strings, account for trailing \0 in property length field
commit
3b9cf7905fe3ab35ab437b5072c883e609d3498d upstream.
For strings, account for trailing \0 in property length field:
This is consistent with how dtc builds string properties.
Function __of_prop_dup() would misbehave on such properties as it duplicates
properties based on the property length field creating new string values
without trailing \0s.
Signed-off-by: Stefan M Schaeckeler <sschaeck@cisco.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Rivshin [Wed, 25 Apr 2018 20:15:01 +0000 (21:15 +0100)]
ARM: 8764/1: kgdb: fix NUMREGBYTES so that gdb_regs[] is the correct size
commit
76ed0b803a2ab793a1b27d1dfe0de7955282cd34 upstream.
NUMREGBYTES (which is used as the size for gdb_regs[]) is incorrectly
based on DBG_MAX_REG_NUM instead of GDB_MAX_REGS. DBG_MAX_REG_NUM
is the number of total registers, while GDB_MAX_REGS is the number
of 'unsigned longs' it takes to serialize those registers. Since
FP registers require 3 'unsigned longs' each, DBG_MAX_REG_NUM is
smaller than GDB_MAX_REGS.
This causes GDB 8.0 give the following error on connect:
"Truncated register 19 in remote 'g' packet"
This also causes the register serialization/deserialization logic
to overflow gdb_regs[], overwriting whatever follows.
Fixes:
834b2964b7ab ("kgdb,arm: fix register dump")
Cc: <stable@vger.kernel.org> # 2.6.37+
Signed-off-by: David Rivshin <drivshin@allworx.com>
Acked-by: Rabin Vincent <rabin@rab.in>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mahesh Salgaonkar [Fri, 27 Apr 2018 06:23:18 +0000 (11:53 +0530)]
powerpc/fadump: Unregister fadump on kexec down path.
commit
722cde76d68e8cc4f3de42e71c82fd40dea4f7b9 upstream.
Unregister fadump on kexec down path otherwise the fadump registration
in new kexec-ed kernel complains that fadump is already registered.
This makes new kernel to continue using fadump registered by previous
kernel which may lead to invalid vmcore generation. Hence this patch
fixes this issue by un-registering fadump in fadump_cleanup() which is
called during kexec path so that new kernel can register fadump with
new valid values.
Fixes:
b500afff11f6 ("fadump: Invalidate registration and release reserved memory for general use.")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gautham R. Shenoy [Thu, 31 May 2018 12:15:09 +0000 (17:45 +0530)]
cpuidle: powernv: Fix promotion from snooze if next state disabled
commit
0a4ec6aa035a52c422eceb2ed51ed88392a3d6c2 upstream.
The commit
78eaa10f027c ("cpuidle: powernv/pseries: Auto-promotion of
snooze to deeper idle state") introduced a timeout for the snooze idle
state so that it could be eventually be promoted to a deeper idle
state. The snooze timeout value is static and set to the target
residency of the next idle state, which would train the cpuidle
governor to pick the next idle state eventually.
The unfortunate side-effect of this is that if the next idle state(s)
is disabled, the CPU will forever remain in snooze, despite the fact
that the system is completely idle, and other deeper idle states are
available.
This patch fixes the issue by dynamically setting the snooze timeout
to the target residency of the next enabled state on the device.
Before Patch:
POWER8 : Only nap disabled.
$ cpupower monitor sleep 30
sleep took 30.01297 seconds and exited with status 0
|Idle_Stats
PKG |CORE|CPU | snoo | Nap | Fast
0| 8| 0| 96.41| 0.00| 0.00
0| 8| 1| 96.43| 0.00| 0.00
0| 8| 2| 96.47| 0.00| 0.00
0| 8| 3| 96.35| 0.00| 0.00
0| 8| 4| 96.37| 0.00| 0.00
0| 8| 5| 96.37| 0.00| 0.00
0| 8| 6| 96.47| 0.00| 0.00
0| 8| 7| 96.47| 0.00| 0.00
POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1,
stop2) disabled:
$ cpupower monitor sleep 30
sleep took 30.05033 seconds and exited with status 0
|Idle_Stats
PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop
0| 16| 0| 89.79| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00
0| 16| 1| 90.12| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00
0| 16| 2| 90.21| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00
0| 16| 3| 90.29| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00
After Patch:
POWER8 : Only nap disabled.
$ cpupower monitor sleep 30
sleep took 30.01200 seconds and exited with status 0
|Idle_Stats
PKG |CORE|CPU | snoo | Nap | Fast
0| 8| 0| 16.58| 0.00| 77.21
0| 8| 1| 18.42| 0.00| 75.38
0| 8| 2| 4.70| 0.00| 94.09
0| 8| 3| 17.06| 0.00| 81.73
0| 8| 4| 3.06| 0.00| 95.73
0| 8| 5| 7.00| 0.00| 96.80
0| 8| 6| 1.00| 0.00| 98.79
0| 8| 7| 5.62| 0.00| 94.17
POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1,
stop2) disabled:
$ cpupower monitor sleep 30
sleep took 30.02110 seconds and exited with status 0
|Idle_Stats
PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop
0| 0| 0| 0.69| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 9.39| 89.70
0| 0| 1| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.05| 93.21
0| 0| 2| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 89.93
0| 0| 3| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 93.26
Fixes:
78eaa10f027c ("cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Neuling [Thu, 17 May 2018 05:37:14 +0000 (15:37 +1000)]
powerpc/ptrace: Fix enforcement of DAWR constraints
commit
cd6ef7eebf171bfcba7dc2df719c2a4958775040 upstream.
Back when we first introduced the DAWR, in commit
4ae7ebe9522a
("powerpc: Change hardware breakpoint to allow longer ranges"), we
screwed up the constraint making it a 1024 byte boundary rather than a
512. This makes the check overly permissive. Fortunately GDB is the
only real user and it always did they right thing, so we never
noticed.
This fixes the constraint to 512 bytes.
Fixes:
4ae7ebe9522a ("powerpc: Change hardware breakpoint to allow longer ranges")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Neuling [Thu, 17 May 2018 05:37:15 +0000 (15:37 +1000)]
powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG
commit
4f7c06e26ec9cf7fe9f0c54dc90079b6a4f4b2c3 upstream.
In commit
e2a800beaca1 ("powerpc/hw_brk: Fix off by one error when
validating DAWR region end") we fixed setting the DAWR end point to
its max value via PPC_PTRACE_SETHWDEBUG. Unfortunately we broke
PTRACE_SET_DEBUGREG when setting a 512 byte aligned breakpoint.
PTRACE_SET_DEBUGREG currently sets the length of the breakpoint to
zero (memset() in hw_breakpoint_init()). This worked with
arch_validate_hwbkpt_settings() before the above patch was applied but
is now broken if the breakpoint is 512byte aligned.
This sets the length of the breakpoint to 8 bytes when using
PTRACE_SET_DEBUGREG.
Fixes:
e2a800beaca1 ("powerpc/hw_brk: Fix off by one error when validating DAWR region end")
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aneesh Kumar K.V [Wed, 30 May 2018 13:18:04 +0000 (18:48 +0530)]
powerpc/mm/hash: Add missing isync prior to kernel stack SLB switch
commit
91d06971881f71d945910de128658038513d1b24 upstream.
Currently we do not have an isync, or any other context synchronizing
instruction prior to the slbie/slbmte in _switch() that updates the
SLB entry for the kernel stack.
However that is not correct as outlined in the ISA.
From Power ISA Version 3.0B, Book III, Chapter 11, page 1133:
"Changing the contents of ... the contents of SLB entries ... can
have the side effect of altering the context in which data
addresses and instruction addresses are interpreted, and in which
instructions are executed and data accesses are performed.
...
These side effects need not occur in program order, and therefore
may require explicit synchronization by software.
...
The synchronizing instruction before the context-altering
instruction ensures that all instructions up to and including that
synchronizing instruction are fetched and executed in the context
that existed before the alteration."
And page 1136:
"For data accesses, the context synchronizing instruction before the
slbie, slbieg, slbia, slbmte, tlbie, or tlbiel instruction ensures
that all preceding instructions that access data storage have
completed to a point at which they have reported all exceptions
they will cause."
We're not aware of any bugs caused by this, but it should be fixed
regardless.
Add the missing isync when updating kernel stack SLB entry.
Cc: stable@vger.kernel.org
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Flesh out change log with more ISA text & explanation]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Thu, 31 May 2018 10:26:10 +0000 (12:26 +0200)]
fuse: fix control dir setup and teardown
commit
6becdb601bae2a043d7fb9762c4d48699528ea6e upstream.
syzbot is reporting NULL pointer dereference at fuse_ctl_remove_conn() [1].
Since fc->ctl_ndents is incremented by fuse_ctl_add_conn() when new_inode()
failed, fuse_ctl_remove_conn() reaches an inode-less dentry and tries to
clear d_inode(dentry)->i_private field.
Fix by only adding the dentry to the array after being fully set up.
When tearing down the control directory, do d_invalidate() on it to get rid
of any mounts that might have been added.
[1] https://syzkaller.appspot.com/bug?id=
f396d863067238959c91c0b7cfc10b163638cac6
Reported-by: syzbot <syzbot+32c236387d66c4516827@syzkaller.appspotmail.com>
Fixes:
bafa96541b25 ("[PATCH] fuse: add control filesystem")
Cc: <stable@vger.kernel.org> # v2.6.18
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Tue, 1 May 2018 04:12:14 +0000 (13:12 +0900)]
fuse: don't keep dead fuse_conn at fuse_fill_super().
commit
543b8f8662fe6d21f19958b666ab0051af9db21a upstream.
syzbot is reporting use-after-free at fuse_kill_sb_blk() [1].
Since sb->s_fs_info field is not cleared after fc was released by
fuse_conn_put() when initialization failed, fuse_kill_sb_blk() finds
already released fc and tries to hold the lock. Fix this by clearing
sb->s_fs_info field after calling fuse_conn_put().
[1] https://syzkaller.appspot.com/bug?id=
a07a680ed0a9290585ca424546860464dd9658db
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+ec3986119086fe4eec97@syzkaller.appspotmail.com>
Fixes:
3b463ae0c626 ("fuse: invalidation reverse calls")
Cc: John Muir <john@jmuir.com>
Cc: Csaba Henk <csaba@gluster.com>
Cc: Anand Avati <avati@redhat.com>
Cc: <stable@vger.kernel.org> # v2.6.31
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Thu, 8 Feb 2018 14:17:38 +0000 (15:17 +0100)]
fuse: atomic_o_trunc should truncate pagecache
commit
df0e91d488276086bc07da2e389986cae0048c37 upstream.
Fuse has an "atomic_o_trunc" mode, where userspace filesystem uses the
O_TRUNC flag in the OPEN request to truncate the file atomically with the
open.
In this mode there's no need to send a SETATTR request to userspace after
the open, so fuse_do_setattr() checks this mode and returns. But this
misses the important step of truncating the pagecache.
Add the missing parts of truncation to the ATTR_OPEN branch.
Reported-by: Chad Austin <chadaustin@fb.com>
Fixes:
6ff958edbf39 ("fuse: add atomic open+truncate support")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amit Pundir [Mon, 16 Apr 2018 06:40:24 +0000 (12:10 +0530)]
Bluetooth: hci_qca: Avoid missing rampatch failure with userspace fw loader
commit
7dc5fe0814c35ec4e7d2e8fa30abab72e0e6a172 upstream.
AOSP use userspace firmware loader to load firmwares, which will
return -EAGAIN in case qca/rampatch_00440302.bin is not found.
Since there is no rampatch for dragonboard820c QCA controller
revision, just make it work as is.
CC: Loic Poulain <loic.poulain@linaro.org>
CC: Nicolas Dechesne <nicolas.dechesne@linaro.org>
CC: Marcel Holtmann <marcel@holtmann.org>
CC: Johan Hedberg <johan.hedberg@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Corey Minyard [Tue, 22 May 2018 13:14:51 +0000 (08:14 -0500)]
ipmi:bt: Set the timeout before doing a capabilities check
commit
fe50a7d0393a552e4539da2d31261a59d6415950 upstream.
There was one place where the timeout value for an operation was
not being set, if a capabilities request was done from idle. Move
the timeout value setting to before where that change might be
requested.
IMHO the cause here is the invisible returns in the macros. Maybe
that's a job for later, though.
Reported-by: Nordmark Claes <Claes.Nordmark@tieto.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Wed, 30 May 2018 12:19:22 +0000 (08:19 -0400)]
branch-check: fix long->int truncation when profiling branches
commit
2026d35741f2c3ece73c11eb7e4a15d7c2df9ebe upstream.
The function __builtin_expect returns long type (see the gcc
documentation), and so do macros likely and unlikely. Unfortunatelly, when
CONFIG_PROFILE_ANNOTATED_BRANCHES is selected, the macros likely and
unlikely expand to __branch_check__ and __branch_check__ truncates the
long type to int. This unintended truncation may cause bugs in various
kernel code (we found a bug in dm-writecache because of it), so it's
better to fix __branch_check__ to return long.
Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1805300818140.24812@file01.intranet.prod.int.rdu2.redhat.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
1f0d69a9fc815 ("tracing: profile likely and unlikely annotations")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Schiffer [Sat, 24 Mar 2018 16:57:49 +0000 (17:57 +0100)]
mips: ftrace: fix static function graph tracing
commit
6fb8656646f996d1eef42e6d56203c4915cb9e08 upstream.
ftrace_graph_caller was never run after calling ftrace_trace_function,
breaking the function graph tracer. Fix this, bringing it in line with the
x86 implementation.
While we're at it, also streamline the control flow of _mcount a bit to
reduce the number of branches.
This issue was reported before:
https://www.linux-mips.org/archives/linux-mips/2014-11/msg00295.html
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Tested-by: Matt Redfearn <matt.redfearn@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/18929/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Fri, 1 Jun 2018 09:28:22 +0000 (11:28 +0200)]
lib/vsprintf: Remove atomic-unsafe support for %pCr
commit
666902e42fd8344b923c02dc5b0f37948ff4f225 upstream.
"%pCr" formats the current rate of a clock, and calls clk_get_rate().
The latter obtains a mutex, hence it must not be called from atomic
context.
Remove support for this rarely-used format, as vsprintf() (and e.g.
printk()) must be callable from any context.
Any remaining out-of-tree users will start seeing the clock's name
printed instead of its rate.
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes:
900cca2944254edd ("lib/vsprintf: add %pC{,n,r} format specifiers for clocks")
Link: http://lkml.kernel.org/r/1527845302-12159-5-git-send-email-geert+renesas@glider.be
To: Jia-Ju Bai <baijiaju1990@gmail.com>
To: Jonathan Corbet <corbet@lwn.net>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Zhang Rui <rui.zhang@intel.com>
To: Eduardo Valentin <edubezval@gmail.com>
To: Eric Anholt <eric@anholt.net>
To: Stefan Wahren <stefan.wahren@i2se.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Sverdlin [Sat, 28 Apr 2018 20:51:39 +0000 (22:51 +0200)]
ASoC: cirrus: i2s: Fix {TX|RX}LinCtrlData setup
commit
5d302ed3cc80564fb835bed5fdba1e1250ecc9e5 upstream.
According to "EP93xx User’s Guide", I2STXLinCtrlData and I2SRXLinCtrlData
registers actually have different format. The only currently used bit
(Left_Right_Justify) has different position. Fix this and simplify the
whole setup taking into account the fact that both registers have zero
default value.
The practical effect of the above is repaired SND_SOC_DAIFMT_RIGHT_J
support (currently unused).
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Sverdlin [Sat, 28 Apr 2018 20:51:38 +0000 (22:51 +0200)]
ASoC: cirrus: i2s: Fix LRCLK configuration
commit
2d534113be9a2aa532a1ae127a57e83558aed358 upstream.
The bit responsible for LRCLK polarity is i2s_tlrs (0), not i2s_trel (2)
(refer to "EP93xx User's Guide").
Previously card drivers which specified SND_SOC_DAIFMT_NB_IF actually got
SND_SOC_DAIFMT_NB_NF, an adaptation is necessary to retain the old
behavior.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Kandagatla [Mon, 4 Jun 2018 11:13:26 +0000 (12:13 +0100)]
ASoC: dapm: delete dapm_kcontrol_data paths list before freeing it
commit
ff2faf1289c1f81b5b26b9451dd1c2006aac8db8 upstream.
dapm_kcontrol_data is freed as part of dapm_kcontrol_free(), leaving the
paths pointer dangling in the list.
This leads to system crash when we try to unload and reload sound card.
I hit this bug during ADSP crash/reboot test case on Dragon board DB410c.
Without this patch, on SLAB Poisoning enabled build, kernel crashes with
"BUG kmalloc-128 (Tainted: G W ): Poison overwritten"
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ingo Flaschberger [Tue, 1 May 2018 14:10:33 +0000 (16:10 +0200)]
1wire: family module autoload fails because of upper/lower case mismatch.
commit
065c09563c872e52813a17218c52cd642be1dca6 upstream.
1wire family module autoload fails because of upper/lower
case mismatch.
Signed-off-by: Ingo Flaschberger <ingo.flaschberger@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxim Moseychuk [Thu, 4 Jan 2018 18:43:03 +0000 (21:43 +0300)]
usb: do not reset if a low-speed or full-speed device timed out
commit
6e01827ed93947895680fbdad68c072a0f4e2450 upstream.
Some low-speed and full-speed devices (for example, bluetooth)
do not have time to initialize. For them, ETIMEDOUT is a valid error.
We need to give them another try. Otherwise, they will
never be initialized correctly and in dmesg will be messages
"Bluetooth: hci0 command 0x1002 tx timeout" or similars.
Fixes:
264904ccc33c ("usb: retry reset if a device times out")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maxim Moseychuk <franchesko.salias.hudro.pedros@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Fri, 20 Apr 2018 14:14:56 +0000 (09:14 -0500)]
signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
commit
7de712ccc096b81d23cc0a941cd9b8cb3956605d upstream.
While working on changing this code to use force_sig_fault I
discovered that do_unaliged_user is sets si_signo to SIGBUS and passes
SIGSEGV to force_sig_info. Which is just b0rked.
The code is reporting a SIGBUS error so replace the SIGSEGV with SIGBUS.
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Cc: stable@vger.kernel.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Fixes:
5a0015d62668 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 3")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Wagner [Tue, 8 May 2018 08:55:09 +0000 (10:55 +0200)]
serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding version
commit
8afb1d2c12163f77777f84616a8e9444d0050ebe upstream.
Commit
40f70c03e33a ("serial: sh-sci: add locking to console write
function to avoid SMP lockup") copied the strategy to avoid locking
problems in conjuncture with the console from the UART8250
driver. Instead using directly spin_{try}lock_irqsave(),
local_irq_save() followed by spin_{try}lock() was used. While this is
correct on mainline, for -rt it is a problem. spin_{try}lock() will
check if it is running in a valid context. Since the local_irq_save()
has already been executed, the context has changed and
spin_{try}lock() will complain. The reason why spin_{try}lock()
complains is that on -rt the spin locks are turned into mutexes and
therefore can sleep. Sleeping with interrupts disabled is not valid.
BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995
in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0
CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted
4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12
Hardware name: Generic RZ/G1 (Flattened Device Tree)
Backtrace:
[<
c00140a0>] (dump_backtrace) from [<
c001424c>] (show_stack+0x18/0x1c)
r7:
c06b01f0 r6:
60010193 r5:
00000000 r4:
c06b01f0
[<
c0014234>] (show_stack) from [<
c01d3c94>] (dump_stack+0x78/0x94)
[<
c01d3c1c>] (dump_stack) from [<
c004c134>] (___might_sleep+0x134/0x194)
r7:
60010113 r6:
c06d3559 r5:
00000000 r4:
ffffe000
[<
c004c000>] (___might_sleep) from [<
c04ded60>] (rt_spin_lock+0x20/0x74)
r5:
c06f4d60 r4:
c06f4d60
[<
c04ded40>] (rt_spin_lock) from [<
c02577e4>] (serial_console_write+0x100/0x118)
r5:
c06f4d60 r4:
c06f4d60
[<
c02576e4>] (serial_console_write) from [<
c0061060>] (call_console_drivers.constprop.15+0x10c/0x124)
r10:
c06d2894 r9:
c04e18b0 r8:
00000028 r7:
00000000 r6:
c06d3559 r5:
c06d2798
r4:
c06b9914 r3:
c02576e4
[<
c0060f54>] (call_console_drivers.constprop.15) from [<
c0062984>] (console_unlock+0x32c/0x430)
r10:
c06d30d8 r9:
00000028 r8:
c06dd518 r7:
00000005 r6:
00000000 r5:
c06d2798
r4:
c06d2798 r3:
00000028
[<
c0062658>] (console_unlock) from [<
c0062e1c>] (vprintk_emit+0x394/0x4f0)
r10:
c06d2798 r9:
c06d30ee r8:
00000006 r7:
00000005 r6:
c06a78fc r5:
00000027
r4:
00000003
[<
c0062a88>] (vprintk_emit) from [<
c0062fa0>] (vprintk+0x28/0x30)
r10:
c060bd46 r9:
00001000 r8:
c06b9a90 r7:
c06b9a90 r6:
c06b994c r5:
c06b9a3c
r4:
c0062fa8
[<
c0062f78>] (vprintk) from [<
c0062fb8>] (vprintk_default+0x10/0x14)
[<
c0062fa8>] (vprintk_default) from [<
c009cd30>] (printk+0x78/0x84)
[<
c009ccbc>] (printk) from [<
c025afdc>] (credit_entropy_bits+0x17c/0x2cc)
r3:
00000001 r2:
decade60 r1:
c061a5ee r0:
c061a523
r4:
00000006
[<
c025ae60>] (credit_entropy_bits) from [<
c025bf74>] (add_interrupt_randomness+0x160/0x178)
r10:
466e7196 r9:
1f536000 r8:
fffeef74 r7:
00000000 r6:
c06b9a60 r5:
c06b9a3c
r4:
dfbcf680
[<
c025be14>] (add_interrupt_randomness) from [<
c006536c>] (irq_thread+0x1e8/0x248)
r10:
c006537c r9:
c06cdf21 r8:
c0064fcc r7:
df791c24 r6:
df791c00 r5:
ffffe000
r4:
df525180
[<
c0065184>] (irq_thread) from [<
c003fba4>] (kthread+0x108/0x11c)
r10:
00000000 r9:
00000000 r8:
c0065184 r7:
df791c00 r6:
00000000 r5:
df791d00
r4:
decac000
[<
c003fa9c>] (kthread) from [<
c00101b8>] (ret_from_fork+0x14/0x3c)
r8:
00000000 r7:
00000000 r6:
00000000 r5:
c003fa9c r4:
df791d00
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[dw: Backported to 4.4.]
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Schmitz [Mon, 14 May 2018 11:10:53 +0000 (23:10 +1200)]
m68k/mm: Adjust VM area to be unmapped by gap size for __iounmap()
commit
3f90f9ef2dda316d64e420d5d51ba369587ccc55 upstream.
If 020/030 support is enabled, get_io_area() leaves an IO_SIZE gap
between mappings which is added to the vm_struct representing the
mapping. __ioremap() uses the actual requested size (after alignment),
while __iounmap() is passed the size from the vm_struct.
On 020/030, early termination descriptors are used to set up mappings of
extent 'size', which are validated on unmapping. The unmapped gap of
size IO_SIZE defeats the sanity check of the pmd tables, causing
__iounmap() to loop forever on 030.
On 040/060, unmapping of page table entries does not check for a valid
mapping, so the umapping loop always completes there.
Adjust size to be unmapped by the gap that had been added in the
vm_struct prior.
This fixes the hang in atari_platform_init() reported a long time ago,
and a similar one reported by Finn recently (addressed by removing
ioremap() use from the SWIM driver.
Tested on my Falcon in 030 mode - untested but should work the same on
040/060 (the extra page tables cleared there would never have been set
up anyway).
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
[geert: Minor commit description improvements]
[geert: This was fixed in 2.4.23, but not in 2.5.x]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Thu, 7 Jun 2018 16:13:48 +0000 (09:13 -0700)]
x86/spectre_v1: Disable compiler optimizations over array_index_mask_nospec()
commit
eab6870fee877258122a042bfd99ee7908c40280 upstream.
Mark Rutland noticed that GCC optimization passes have the potential to elide
necessary invocations of the array_index_mask_nospec() instruction sequence,
so mark the asm() volatile.
Mark explains:
"The volatile will inhibit *some* cases where the compiler could lift the
array_index_nospec() call out of a branch, e.g. where there are multiple
invocations of array_index_nospec() with the same arguments:
if (idx < foo) {
idx1 = array_idx_nospec(idx, foo)
do_something(idx1);
}
< some other code >
if (idx < foo) {
idx2 = array_idx_nospec(idx, foo);
do_something_else(idx2);
}
... since the compiler can determine that the two invocations yield the same
result, and reuse the first result (likely the same register as idx was in
originally) for the second branch, effectively re-writing the above as:
if (idx < foo) {
idx = array_idx_nospec(idx, foo);
do_something(idx);
}
< some other code >
if (idx < foo) {
do_something_else(idx);
}
... if we don't take the first branch, then speculatively take the second, we
lose the nospec protection.
There's more info on volatile asm in the GCC docs:
https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile
"
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes:
babdde2698d4 ("x86: Implement array_index_mask_nospec")
Link: https://lkml.kernel.org/lkml/152838798950.14521.4893346294059739135.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thadeu Lima de Souza Cascardo [Fri, 8 Jun 2018 00:11:01 +0000 (17:11 -0700)]
fs/binfmt_misc.c: do not allow offset overflow
commit
5cc41e099504b77014358b58567c5ea6293dd220 upstream.
WHen registering a new binfmt_misc handler, it is possible to overflow
the offset to get a negative value, which might crash the system, or
possibly leak kernel data.
Here is a crash log when
2500000000 was used as an offset:
BUG: unable to handle kernel paging request at
ffff989cfd6edca0
IP: load_misc_binary+0x22b/0x470 [binfmt_misc]
PGD
1ef3e067 P4D
1ef3e067 PUD 0
Oops: 0000 [#1] SMP NOPTI
Modules linked in: binfmt_misc kvm_intel ppdev kvm irqbypass joydev input_leds serio_raw mac_hid parport_pc qemu_fw_cfg parpy
CPU: 0 PID: 2499 Comm: bash Not tainted 4.15.0-22-generic #24-Ubuntu
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
RIP: 0010:load_misc_binary+0x22b/0x470 [binfmt_misc]
Call Trace:
search_binary_handler+0x97/0x1d0
do_execveat_common.isra.34+0x667/0x810
SyS_execve+0x31/0x40
do_syscall_64+0x73/0x130
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Use kstrtoint instead of simple_strtoul. It will work as the code
already set the delimiter byte to '\0' and we only do it when the field
is not empty.
Tested with offsets -1,
2500000000, UINT_MAX and INT_MAX. Also tested
with examples documented at Documentation/admin-guide/binfmt-misc.rst
and other registrations from packages on Ubuntu.
Link: http://lkml.kernel.org/r/20180529135648.14254-1-cascardo@canonical.com
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Potyra [Wed, 2 May 2018 08:55:31 +0000 (10:55 +0200)]
w1: mxc_w1: Enable clock before calling clk_get_rate() on it
commit
955bc61328dc0a297fb3baccd84e9d3aee501ed8 upstream.
According to the API, you may only call clk_get_rate() after actually
enabling it.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes:
a5fd9139f74c ("w1: add 1-wire master driver for i.MX27 / i.MX31")
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Thu, 31 May 2018 11:21:07 +0000 (13:21 +0200)]
libata: Drop SanDisk SD7UB3Q*G1001 NOLPM quirk
commit
2cfce3a86b64b53f0a70e92a6a659c720c319b45 upstream.
Commit
184add2ca23c ("libata: Apply NOLPM quirk for SanDisk
SD7UB3Q*G1001 SSDs") disabled LPM for SanDisk SD7UB3Q*G1001 SSDs.
This has lead to several reports of users of that SSD where LPM
was working fine and who know have a significantly increased idle
power consumption on their laptops.
Likely there is another problem on the T450s from the original
reporter which gets exposed by the uncore reaching deeper sleep
states (higher PC-states) due to LPM being enabled. The problem as
reported, a hardfreeze about once a day, already did not sound like
it would be caused by LPM and the reports of the SSD working fine
confirm this. The original reporter is ok with dropping the quirk.
A X250 user has reported the same hard freeze problem and for him
the problem went away after unrelated updates, I suspect some GPU
driver stack changes fixed things.
TL;DR: The original reporters problem were triggered by LPM but not
an LPM issue, so drop the quirk for the SSD in question.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1583207
Cc: stable@vger.kernel.org
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Lorenzo Dalrio <lorenzo.dalrio@gmail.com>
Reported-by: Lorenzo Dalrio <lorenzo.dalrio@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Richard W.M. Jones" <rjones@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 29 May 2018 09:13:24 +0000 (12:13 +0300)]
libata: zpodd: small read overflow in eject_tray()
commit
18c9a99bce2a57dfd7e881658703b5d7469cc7b9 upstream.
We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be
ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes.
Fixes:
213342053db5 ("libata: handle power transition of ODD")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Wed, 6 Sep 2017 08:56:29 +0000 (09:56 +0100)]
libata: zpodd: make arrays cdb static, reduces object code size
commit
795ef788145ed2fa023efdf11e8d5d7bedc21462 upstream.
Don't populate the arrays cdb on the stack, instead make them static.
Makes the object code smaller by 230 bytes:
Before:
text data bss dec hex filename
3797 240 0 4037 fc5 drivers/ata/libata-zpodd.o
After:
text data bss dec hex filename
3407 400 0 3807 edf drivers/ata/libata-zpodd.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tao Wang [Sat, 26 May 2018 07:16:48 +0000 (15:16 +0800)]
cpufreq: Fix new policy initialization during limits updates via sysfs
commit
c7d1f119c48f64bebf0fa1e326af577c6152fe30 upstream.
If the policy limits are updated via cpufreq_update_policy() and
subsequently via sysfs, the limits stored in user_policy may be
set incorrectly.
For example, if both min and max are set via sysfs to the maximum
available frequency, user_policy.min and user_policy.max will also
be the maximum. If a policy notifier triggered by
cpufreq_update_policy() lowers both the min and the max at this
point, that change is not reflected by the user_policy limits, so
if the max is updated again via sysfs to the same lower value,
then user_policy.max will be lower than user_policy.min which
shouldn't happen. In particular, if one of the policy CPUs is
then taken offline and back online, cpufreq_set_policy() will
fail for it due to a failing limits check.
To prevent that from happening, initialize the min and max fields
of the new_policy object to the ones stored in user_policy that
were previously set via sysfs.
Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dennis Wassenberg [Tue, 12 Jun 2018 05:11:11 +0000 (07:11 +0200)]
ALSA: hda: add dock and led support for HP ProBook 640 G4
commit
7eef32c1ef895a3a96463f9cbd04203007cd5555 upstream.
This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP ProBook 640 G4
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dennis Wassenberg [Tue, 12 Jun 2018 05:10:59 +0000 (07:10 +0200)]
ALSA: hda: add dock and led support for HP EliteBook 830 G5
commit
2861751f67b91e1d24e68010ced96614fb3140f4 upstream.
This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP EliteBook 830 G5
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bo Chen [Thu, 31 May 2018 22:35:18 +0000 (15:35 -0700)]
ALSA: hda - Handle kzalloc() failure in snd_hda_attach_pcm_stream()
commit
a3aa60d511746bd6c0d0366d4eb90a7998bcde8b upstream.
When 'kzalloc()' fails in 'snd_hda_attach_pcm_stream()', a new pcm instance is
created without setting its operators via 'snd_pcm_set_ops()'. Following
operations on the new pcm instance can trigger kernel null pointer dereferences
and cause kernel oops.
This bug was found with my work on building a gray-box fault-injection tool for
linux-kernel-module binaries. A kernel null pointer dereference was confirmed
from line 'substream->ops->open()' in function 'snd_pcm_open_substream()' in
file 'sound/core/pcm_native.c'.
This patch fixes the bug by calling 'snd_device_free()' in the error handling
path of 'kzalloc()', which removes the new pcm instance from the snd card before
returns with an error code.
Signed-off-by: Bo Chen <chenbo@pdx.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qu Wenruo [Tue, 5 Jun 2018 04:36:56 +0000 (12:36 +0800)]
btrfs: scrub: Don't use inode pages for device replace
commit
ac0b4145d662a3b9e34085dea460fb06ede9b69b upstream.
[BUG]
Btrfs can create compressed extent without checksum (even though it
shouldn't), and if we then try to replace device containing such extent,
the result device will contain all the uncompressed data instead of the
compressed one.
Test case already submitted to fstests:
https://patchwork.kernel.org/patch/
10442353/
[CAUSE]
When handling compressed extent without checksum, device replace will
goe into copy_nocow_pages() function.
In that function, btrfs will get all inodes referring to this data
extents and then use find_or_create_page() to get pages direct from that
inode.
The problem here is, pages directly from inode are always uncompressed.
And for compressed data extent, they mismatch with on-disk data.
Thus this leads to corrupted compressed data extent written to replace
device.
[FIX]
In this attempt, we could just remove the "optimization" branch, and let
unified scrub_pages() to handle it.
Although scrub_pages() won't bother reusing page cache, it will be a
little slower, but it does the correct csum checking and won't cause
such data corruption caused by "optimization".
Note about the fix: this is the minimal fix that can be backported to
older stable trees without conflicts. The whole callchain from
copy_nocow_pages() can be deleted, and will be in followup patches.
Fixes:
ff023aac3119 ("Btrfs: add code to scrub to copy read data to another disk")
CC: stable@vger.kernel.org # 4.4+
Reported-by: James Harvey <jamespharvey20@gmail.com>
Reviewed-by: James Harvey <jamespharvey20@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ remove code removal, add note why ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Mon, 7 May 2018 10:10:31 +0000 (19:10 +0900)]
driver core: Don't ignore class_dir_create_and_add() failure.
commit
84d0c27d6233a9ba0578b20f5a09701eb66cee42 upstream.
syzbot is hitting WARN() at kernfs_add_one() [1].
This is because kernfs_create_link() is confused by previous device_add()
call which continued without setting dev->kobj.parent field when
get_device_parent() failed by memory allocation fault injection.
Fix this by propagating the error from class_dir_create_and_add() to
the calllers of get_device_parent().
[1] https://syzkaller.appspot.com/bug?id=
fae0fb607989ea744526d1c082a5b8de6529116f
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+df47f81c226b31d89fb1@syzkaller.appspotmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 25 May 2018 16:51:25 +0000 (12:51 -0400)]
ext4: fix fencepost error in check for inode count overflow during resize
commit
4f2f76f751433908364ccff82f437a57d0e6e9b7 upstream.
ext4_resize_fs() has an off-by-one bug when checking whether growing of
a filesystem will not overflow inode count. As a result it allows a
filesystem with 8192 inodes per group to grow to 64TB which overflows
inode count to 0 and makes filesystem unusable. Fix it.
Cc: stable@vger.kernel.org
Fixes:
3f8a6411fbada1fa482276591e037f3b1adcf55b
Reported-by: Jaco Kroon <jaco@uls.co.za>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Czerner [Sun, 13 May 2018 23:28:35 +0000 (19:28 -0400)]
ext4: update mtime in ext4_punch_hole even if no blocks are released
commit
eee597ac931305eff3d3fd1d61d6aae553bc0984 upstream.
Currently in ext4_punch_hole we're going to skip the mtime update if
there are no actual blocks to release. However we've actually modified
the file by zeroing the partial block so the mtime should be updated.
Moreover the sync and datasync handling is skipped as well, which is
also wrong. Fix it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Joe Habermann <joe.habermann@quantum.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank van der Linden [Tue, 12 Jun 2018 23:09:37 +0000 (23:09 +0000)]
tcp: verify the checksum of the first data segment in a new connection
[ Upstream commit
4fd44a98ffe0d048246efef67ed640fdf2098a62 ]
commit
079096f103fa ("tcp/dccp: install syn_recv requests into ehash
table") introduced an optimization for the handling of child sockets
created for a new TCP connection.
But this optimization passes any data associated with the last ACK of the
connection handshake up the stack without verifying its checksum, because it
calls tcp_child_process(), which in turn calls tcp_rcv_state_process()
directly. These lower-level processing functions do not do any checksum
verification.
Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to
fix this.
Fixes:
079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiangning Yu [Thu, 7 Jun 2018 05:39:59 +0000 (13:39 +0800)]
bonding: re-evaluate force_primary when the primary slave name changes
[ Upstream commit
eb55bbf865d9979098c6a7a17cbdb41237ece951 ]
There is a timing issue under active-standy mode, when bond_enslave() is
called, bond->params.primary might not be initialized yet.
Any time the primary slave string changes, bond->force_primary should be
set to true to make sure the primary becomes the active slave.
Signed-off-by: Xiangning Yu <yuxiangning@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Glöckner [Mon, 14 May 2018 14:40:05 +0000 (09:40 -0500)]
usb: musb: fix remote wakeup racing with suspend
[ Upstream commit
ebc3dd688cd988754a304147753b13e58de1b5a1 ]
It has been observed that writing 0xF2 to the power register while it
reads as 0xF4 results in the register having the value 0xF0, i.e. clearing
RESUME and setting SUSPENDM in one go does not work. It might also violate
the USB spec to transition directly from resume to suspend, especially
when not taking T_DRSMDN into account. But this is what happens when a
remote wakeup occurs between SetPortFeature USB_PORT_FEAT_SUSPEND on the
root hub and musb_bus_suspend being called.
This commit returns -EBUSY when musb_bus_suspend is called while remote
wakeup is signalled and thus avoids to reset the RESUME bit. Ignoring
this error when musb_port_suspend is called from musb_hub_control is ok.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liu Bo [Fri, 15 Jun 2018 02:39:23 +0000 (02:39 +0000)]
Btrfs: make raid6 rebuild retry more
[ Upstream commit
8810f7517a3bc4ca2d41d022446d3f5fd6b77c09 ]
There is a scenario that can end up with rebuild process failing to
return good content, i.e.
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,
- the 1st retry is to rebuild with all other stripes, it'll eventually
be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
that it will do raid6 style rebuild,
however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content, and users will think of this as data loss.
More seriouly, if the loss happens on some important internal btree
roots, it could refuse to mount.
This extends btrfs to do more retries and each retry fails only one
stripe. Since raid6 can tolerate 2 disk failures, if there is one
more failure besides the failure on which we're recovering, this can
always work.
The worst case is to retry as many times as the number of raid6 disks,
but given the fact that such a scenario is really rare in practice,
it's still acceptable.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 11 Dec 2017 01:55:02 +0000 (17:55 -0800)]
tcp: do not overshoot window_clamp in tcp_rcv_space_adjust()
commit
02db55718d53f9d426cee504c27fb768e9ed4ffe upstream.
While rcvbuf is properly clamped by tcp_rmem[2], rcvwin
is left to a potentially too big value.
It has no serious effect, since :
1) tcp_grow_window() has very strict checks.
2) window_clamp can be mangled by user space to any value anyway.
tcp_init_buffer_space() and companions use tcp_full_space(),
we use tcp_win_from_space() to avoid reloading sk->sk_rcvbuf
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sasha Levin [Fri, 15 Jun 2018 02:39:22 +0000 (02:39 +0000)]
Revert "Btrfs: fix scrub to repair raid6 corruption"
This reverts commit
95b286daf7ba784191023ad110122703eb2ebabc.
This commit used an incorrect log message.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Finn Thain [Wed, 30 May 2018 03:03:51 +0000 (13:03 +1000)]
net/sonic: Use dma_mapping_error()
[ Upstream commit
26de0b76d9ba3200f09c6cb9d9618bda338be5f7 ]
With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the
message, "DMA-API: device driver failed to check map error".
Add the missing dma_mapping_error() call.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Hill [Mon, 28 May 2018 00:10:41 +0000 (20:10 -0400)]
net: qmi_wwan: Add Netgear Aircard 779S
[ Upstream commit
2415f3bd059fe050eb98aedf93664d000ceb4e92 ]
Add support for Netgear Aircard 779S
Signed-off-by: Josh Hill <josh@joshuajhill.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Bornyakov [Fri, 25 May 2018 17:49:52 +0000 (20:49 +0300)]
atm: zatm: fix memcmp casting
[ Upstream commit
f9c6442a8f0b1dde9e755eb4ff6fa22bcce4eabc ]
memcmp() returns int, but eprom_try_esi() cast it to unsigned char. One
can lose significant bits and get 0 from non-0 value returned by the
memcmp().
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Anastasov [Sat, 19 May 2018 15:22:35 +0000 (18:22 +0300)]
ipvs: fix buffer overflow with sync daemon and service
[ Upstream commit
52f96757905bbf0edef47f3ee6c7c784e7f8ff8a ]
syzkaller reports for buffer overflow for interface name
when starting sync daemons [1]
What we do is that we copy user structure into larger stack
buffer but later we search NUL past the stack buffer.
The same happens for sched_name when adding/editing virtual server.
We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN
being used as size in include/uapi/linux/ip_vs.h, so they
include the space for NUL.
As using strlcpy is wrong for unsafe source, replace it with
strscpy and add checks to return EINVAL if source string is not
NUL-terminated. The incomplete strlcpy fix comes from 2.6.13.
For the netlink interface reduce the len parameter for
IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME,
so that we get proper EINVAL.
[1]
kernel BUG at lib/string.c:1052!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ #45
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051
RSP: 0018:
ffff8801c976f800 EFLAGS:
00010282
RAX:
0000000000000022 RBX:
0000000000000040 RCX:
0000000000000000
RDX:
0000000000000022 RSI:
ffffffff8160f6f1 RDI:
ffffed00392edef6
RBP:
ffff8801c976f800 R08:
ffff8801cf4c62c0 R09:
ffffed003b5e4fb0
R10:
ffffed003b5e4fb0 R11:
ffff8801daf27d87 R12:
ffff8801c976fa20
R13:
ffff8801c976fae4 R14:
ffff8801c976fae0 R15:
000000000000048b
FS:
00007fd99f75e700(0000) GS:
ffff8801daf00000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000200001c0 CR3:
00000001d6843000 CR4:
00000000001406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
strlen include/linux/string.h:270 [inline]
strlcpy include/linux/string.h:293 [inline]
do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388
nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115
ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253
udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487
ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917
tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057
sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046
__sys_setsockopt+0x1bd/0x390 net/socket.c:1903
__do_sys_setsockopt net/socket.c:1914 [inline]
__se_sys_setsockopt net/socket.c:1911 [inline]
__x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x447369
RSP: 002b:
00007fd99f75dda8 EFLAGS:
00000246 ORIG_RAX:
0000000000000036
RAX:
ffffffffffffffda RBX:
00000000006e39e4 RCX:
0000000000447369
RDX:
000000000000048b RSI:
0000000000000000 RDI:
0000000000000003
RBP:
0000000000000000 R08:
0000000000000018 R09:
0000000000000000
R10:
00000000200001c0 R11:
0000000000000246 R12:
00000000006e39e0
R13:
75a1ff93f0896195 R14:
6f745f3168746576 R15:
0000000000000001
Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb
de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90
90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56
RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP:
ffff8801c976f800
Reported-and-tested-by: syzbot+aac887f77319868646df@syzkaller.appspotmail.com
Fixes:
e4ff67513096 ("ipvs: add sync_maxlen parameter for the sync daemon")
Fixes:
4da62fc70d7c ("[IPVS]: Fix for overflows")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Fri, 27 Apr 2018 08:45:31 +0000 (10:45 +0200)]
netfilter: ebtables: handle string from userspace with care
[ Upstream commit
94c752f99954797da583a84c4907ff19e92550a4 ]
strlcpy() can't be safely used on a user-space provided string,
as it can try to read beyond the buffer's end, if the latter is
not NULL terminated.
Leveraging the above, syzbot has been able to trigger the following
splat:
BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300
[inline]
BUG: KASAN: stack-out-of-bounds in compat_mtw_from_user
net/bridge/netfilter/ebtables.c:1957 [inline]
BUG: KASAN: stack-out-of-bounds in ebt_size_mwt
net/bridge/netfilter/ebtables.c:2059 [inline]
BUG: KASAN: stack-out-of-bounds in size_entry_mwt
net/bridge/netfilter/ebtables.c:2155 [inline]
BUG: KASAN: stack-out-of-bounds in compat_copy_entries+0x96c/0x14a0
net/bridge/netfilter/ebtables.c:2194
Write of size 33 at addr
ffff8801b0abf888 by task syz-executor0/4504
CPU: 0 PID: 4504 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #40
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
strlcpy include/linux/string.h:300 [inline]
compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline]
ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline]
size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline]
compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194
compat_do_replace+0x483/0x900 net/bridge/netfilter/ebtables.c:2285
compat_do_ebt_set_ctl+0x2ac/0x324 net/bridge/netfilter/ebtables.c:2367
compat_nf_sockopt net/netfilter/nf_sockopt.c:144 [inline]
compat_nf_setsockopt+0x9b/0x140 net/netfilter/nf_sockopt.c:156
compat_ip_setsockopt+0xff/0x140 net/ipv4/ip_sockglue.c:1279
inet_csk_compat_setsockopt+0x97/0x120 net/ipv4/inet_connection_sock.c:1041
compat_tcp_setsockopt+0x49/0x80 net/ipv4/tcp.c:2901
compat_sock_common_setsockopt+0xb4/0x150 net/core/sock.c:3050
__compat_sys_setsockopt+0x1ab/0x7c0 net/compat.c:403
__do_compat_sys_setsockopt net/compat.c:416 [inline]
__se_compat_sys_setsockopt net/compat.c:413 [inline]
__ia32_compat_sys_setsockopt+0xbd/0x150 net/compat.c:413
do_syscall_32_irqs_on arch/x86/entry/common.c:323 [inline]
do_fast_syscall_32+0x345/0xf9b arch/x86/entry/common.c:394
entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7fb3cb9
RSP: 002b:
00000000fff0c26c EFLAGS:
00000282 ORIG_RAX:
000000000000016e
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000000000
RDX:
0000000000000080 RSI:
0000000020000300 RDI:
00000000000005f4
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000000
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
The buggy address belongs to the page:
page:
ffffea0006c2afc0 count:0 mapcount:0 mapping:
0000000000000000 index:0x0
flags: 0x2fffc0000000000()
raw:
02fffc0000000000 0000000000000000 0000000000000000 00000000ffffffff
raw:
0000000000000000 ffffea0006c20101 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected
Fix the issue replacing the unsafe function with strscpy() and
taking care of possible errors.
Fixes:
81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
Reported-and-tested-by: syzbot+4e42a04e0bc33cb6c087@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 12 May 2018 09:49:30 +0000 (02:49 -0700)]
xfrm6: avoid potential infinite loop in _decode_session6()
[ Upstream commit
d9f92772e8ec388d070752ee8f187ef8fa18621f ]
syzbot found a way to trigger an infinitie loop by overflowing
@offset variable that has been forced to use u16 for some very
obscure reason in the past.
We probably want to look at NEXTHDR_FRAGMENT handling which looks
wrong, in a separate patch.
In net-next, we shall try to use skb_header_pointer() instead of
pskb_may_pull().
watchdog: BUG: soft lockup - CPU#1 stuck for 134s! [syz-executor738:4553]
Modules linked in:
irq event stamp:
13885653
hardirqs last enabled at (
13885652): [<
ffffffff878009d5>] restore_regs_and_return_to_kernel+0x0/0x2b
hardirqs last disabled at (
13885653): [<
ffffffff87800905>] interrupt_entry+0xb5/0xf0 arch/x86/entry/entry_64.S:625
softirqs last enabled at (
13614028): [<
ffffffff84df0809>] tun_napi_alloc_frags drivers/net/tun.c:1478 [inline]
softirqs last enabled at (
13614028): [<
ffffffff84df0809>] tun_get_user+0x1dd9/0x4290 drivers/net/tun.c:1825
softirqs last disabled at (
13614032): [<
ffffffff84df1b6f>] tun_get_user+0x313f/0x4290 drivers/net/tun.c:1942
CPU: 1 PID: 4553 Comm: syz-executor738 Not tainted 4.17.0-rc3+ #40
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:check_kcov_mode kernel/kcov.c:67 [inline]
RIP: 0010:__sanitizer_cov_trace_pc+0x20/0x50 kernel/kcov.c:101
RSP: 0018:
ffff8801d8cfe250 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffff13
RAX:
ffff8801d88a8080 RBX:
ffff8801d7389e40 RCX:
0000000000000006
RDX:
0000000000000000 RSI:
ffffffff868da4ad RDI:
ffff8801c8a53277
RBP:
ffff8801d8cfe250 R08:
ffff8801d88a8080 R09:
ffff8801d8cfe3e8
R10:
ffffed003b19fc87 R11:
ffff8801d8cfe43f R12:
ffff8801c8a5327f
R13:
0000000000000000 R14:
ffff8801c8a4e5fe R15:
ffff8801d8cfe3e8
FS:
0000000000d88940(0000) GS:
ffff8801daf00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffff600400 CR3:
00000001acab3000 CR4:
00000000001406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
_decode_session6+0xc1d/0x14f0 net/ipv6/xfrm6_policy.c:150
__xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:2368
xfrm_decode_session_reverse include/net/xfrm.h:1213 [inline]
icmpv6_route_lookup+0x395/0x6e0 net/ipv6/icmp.c:372
icmp6_send+0x1982/0x2da0 net/ipv6/icmp.c:551
icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43
ip6_input_finish+0x14e1/0x1a30 net/ipv6/ip6_input.c:305
NF_HOOK include/linux/netfilter.h:288 [inline]
ip6_input+0xe1/0x5e0 net/ipv6/ip6_input.c:327
dst_input include/net/dst.h:450 [inline]
ip6_rcv_finish+0x29c/0xa10 net/ipv6/ip6_input.c:71
NF_HOOK include/linux/netfilter.h:288 [inline]
ipv6_rcv+0xeb8/0x2040 net/ipv6/ip6_input.c:208
__netif_receive_skb_core+0x2468/0x3650 net/core/dev.c:4646
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4711
netif_receive_skb_internal+0x126/0x7b0 net/core/dev.c:4785
napi_frags_finish net/core/dev.c:5226 [inline]
napi_gro_frags+0x631/0xc40 net/core/dev.c:5299
tun_get_user+0x3168/0x4290 drivers/net/tun.c:1951
tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1996
call_write_iter include/linux/fs.h:1784 [inline]
do_iter_readv_writev+0x859/0xa50 fs/read_write.c:680
do_iter_write+0x185/0x5f0 fs/read_write.c:959
vfs_writev+0x1c7/0x330 fs/read_write.c:1004
do_writev+0x112/0x2f0 fs/read_write.c:1039
__do_sys_writev fs/read_write.c:1112 [inline]
__se_sys_writev fs/read_write.c:1109 [inline]
__x64_sys_writev+0x75/0xb0 fs/read_write.c:1109
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: syzbot+0053c8...@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 16 Jun 2018 07:54:27 +0000 (09:54 +0200)]
Linux 4.4.138
Michael Ellerman [Thu, 3 May 2018 12:29:29 +0000 (22:29 +1000)]
crypto: vmx - Remove overly verbose printk from AES init routines
commit
1411b5218adbcf1d45ddb260db5553c52e8d917c upstream.
In the vmx AES init routines we do a printk(KERN_INFO ...) to report
the fallback implementation we're using.
However with a slow console this can significantly affect the speed of
crypto operations. Using 'cryptsetup benchmark' the removal of the
printk() leads to a ~5x speedup for aes-cbc decryption.
So remove them.
Fixes:
8676590a1593 ("crypto: vmx - Adding AES routines for VMX module")
Fixes:
8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module")
Fixes:
4f7f60d312b3 ("crypto: vmx - Adding CTR routines for VMX module")
Fixes:
cc333cd68dfa ("crypto: vmx - Adding GHASH routines for VMX module")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Wienke [Mon, 4 Jun 2018 20:37:26 +0000 (13:37 -0700)]
Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI ID
commit
e6e7e9cd8eed0e18217c899843bffbe8c7dae564 upstream.
Add ELAN0612 to the list of supported touchpads; this ID is used in Lenovo
v330 14IKB devices.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199253
Signed-off-by: Johannes Wienke <languitar@semipol.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ethan Lee [Thu, 31 May 2018 23:13:17 +0000 (16:13 -0700)]
Input: goodix - add new ACPI id for GPD Win 2 touch screen
commit
5ca4d1ae9bad0f59bd6f851c39b19f5366953666 upstream.
GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp
Tested on a unit from the first production run sent to Indiegogo backers
Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Wed, 6 Jun 2018 15:38:09 +0000 (17:38 +0200)]
kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access
commit
3c9fa24ca7c9c47605672916491f79e8ccacb9e6 upstream.
The functions that were used in the emulation of fxrstor, fxsave, sgdt and
sidt were originally meant for task switching, and as such they did not
check privilege levels. This is very bad when the same functions are used
in the emulation of unprivileged instructions. This is CVE-2018-10853.
The obvious fix is to add a new argument to ops->read_std and ops->write_std,
which decides whether the access is a "system" access or should use the
processor's CPL.
Fixes:
129a72a0d3c8 ("KVM: x86: Introduce segmented_write_std", 2017-01-12)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gil Kupfer [Fri, 1 Jun 2018 07:47:47 +0000 (00:47 -0700)]
vmw_balloon: fixing double free when batching mode is off
commit
b23220fe054e92f616b82450fae8cd3ab176cc60 upstream.
The balloon.page field is used for two different purposes if batching is
on or off. If batching is on, the field point to the page which is used
to communicate with with the hypervisor. If it is off, balloon.page
points to the page that is about to be (un)locked.
Unfortunately, this dual-purpose of the field introduced a bug: when the
balloon is popped (e.g., when the machine is reset or the balloon driver
is explicitly removed), the balloon driver frees, unconditionally, the
page that is held in balloon.page. As a result, if batching is
disabled, this leads to double freeing the last page that is sent to the
hypervisor.
The following error occurs during rmmod when kernel checkers are on, and
the balloon is not empty:
[ 42.307653] ------------[ cut here ]------------
[ 42.307657] Kernel BUG at
ffffffffba1e4b28 [verbose debug info unavailable]
[ 42.307720] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 42.312512] Modules linked in: vmw_vsock_vmci_transport vsock ppdev joydev vmw_balloon(-) input_leds serio_raw vmw_vmci parport_pc shpchp parport i2c_piix4 nfit mac_hid autofs4 vmwgfx drm_kms_helper hid_generic syscopyarea sysfillrect usbhid sysimgblt fb_sys_fops hid ttm mptspi scsi_transport_spi ahci mptscsih drm psmouse vmxnet3 libahci mptbase pata_acpi
[ 42.312766] CPU: 10 PID: 1527 Comm: rmmod Not tainted 4.12.0+ #5
[ 42.312803] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2016
[ 42.313042] task:
ffff9bf9680f8000 task.stack:
ffffbfefc1638000
[ 42.313290] RIP: 0010:__free_pages+0x38/0x40
[ 42.313510] RSP: 0018:
ffffbfefc163be98 EFLAGS:
00010246
[ 42.313731] RAX:
000000000000003e RBX:
ffffffffc02b9720 RCX:
0000000000000006
[ 42.313972] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff9bf97e08e0a0
[ 42.314201] RBP:
ffffbfefc163be98 R08:
0000000000000000 R09:
0000000000000000
[ 42.314435] R10:
0000000000000000 R11:
0000000000000000 R12:
ffffffffc02b97e4
[ 42.314505] R13:
ffffffffc02b9748 R14:
ffffffffc02b9728 R15:
0000000000000200
[ 42.314550] FS:
00007f3af5fec700(0000) GS:
ffff9bf97e080000(0000) knlGS:
0000000000000000
[ 42.314599] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 42.314635] CR2:
00007f44f6f4ab24 CR3:
00000003a7d12000 CR4:
00000000000006e0
[ 42.314864] Call Trace:
[ 42.315774] vmballoon_pop+0x102/0x130 [vmw_balloon]
[ 42.315816] vmballoon_exit+0x42/0xd64 [vmw_balloon]
[ 42.315853] SyS_delete_module+0x1e2/0x250
[ 42.315891] entry_SYSCALL_64_fastpath+0x23/0xc2
[ 42.315924] RIP: 0033:0x7f3af5b0e8e7
[ 42.315949] RSP: 002b:
00007fffe6ce0148 EFLAGS:
00000206 ORIG_RAX:
00000000000000b0
[ 42.315996] RAX:
ffffffffffffffda RBX:
000055be676401e0 RCX:
00007f3af5b0e8e7
[ 42.316951] RDX:
000000000000000a RSI:
0000000000000800 RDI:
000055be67640248
[ 42.317887] RBP:
0000000000000003 R08:
0000000000000000 R09:
1999999999999999
[ 42.318845] R10:
0000000000000883 R11:
0000000000000206 R12:
00007fffe6cdf130
[ 42.319755] R13:
0000000000000000 R14:
0000000000000000 R15:
000055be676401e0
[ 42.320606] Code: c0 74 1c f0 ff 4f 1c 74 02 5d c3 85 f6 74 07 e8 0f d8 ff ff 5d c3 31 f6 e8 c6 fb ff ff 5d c3 48 c7 c6 c8 0f c5 ba e8 58 be 02 00 <0f> 0b 66 0f 1f 44 00 00 66 66 66 66 90 48 85 ff 75 01 c3 55 48
[ 42.323462] RIP: __free_pages+0x38/0x40 RSP:
ffffbfefc163be98
[ 42.325735] ---[ end trace
872e008e33f81508 ]---
To solve the bug, we eliminate the dual purpose of balloon.page.
Fixes:
f220a80f0c2e ("VMware balloon: add batching to the vmw_balloon.")
Cc: stable@vger.kernel.org
Reported-by: Oleksandr Natalenko <onatalen@redhat.com>
Signed-off-by: Gil Kupfer <gilkup@gmail.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Thu, 10 May 2018 06:41:13 +0000 (08:41 +0200)]
serial: samsung: fix maxburst parameter for DMA transactions
commit
aa2f80e752c75e593b3820f42c416ed9458fa73e upstream.
The best granularity of residue that DMA engine can report is in the BURST
units, so the serial driver must use MAXBURST = 1 and DMA_SLAVE_BUSWIDTH_1_BYTE
if it relies on exact number of bytes transferred by DMA engine.
Fixes:
62c37eedb74c ("serial: samsung: add dma reqest/release functions")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Wed, 6 Jun 2018 15:37:49 +0000 (17:37 +0200)]
KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system
commit
ce14e868a54edeb2e30cb7a7b104a2fc4b9d76ca upstream.
Int the next patch the emulator's .read_std and .write_std callbacks will
grow another argument, which is not needed in kvm_read_guest_virt and
kvm_write_guest_virt_system's callers. Since we have to make separate
functions, let's give the currently existing names a nicer interface, too.
Fixes:
129a72a0d3c8 ("KVM: x86: Introduce segmented_write_std", 2017-01-12)
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Wed, 6 Jun 2018 14:43:02 +0000 (16:43 +0200)]
KVM: x86: introduce linear_{read,write}_system
commit
79367a65743975e5cac8d24d08eccc7fdae832b0 upstream.
Wrap the common invocation of ctxt->ops->read_std and ctxt->ops->write_std, so
as to have a smaller patch when the functions grow another argument.
Fixes:
129a72a0d3c8 ("KVM: x86: Introduce segmented_write_std", 2017-01-12)
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 27 Aug 2017 19:12:25 +0000 (12:12 -0700)]
Clarify (and fix) MAX_LFS_FILESIZE macros
commit
0cc3b0ec23ce4c69e1e890ed2b8d2fa932b14aad upstream.
We have a MAX_LFS_FILESIZE macro that is meant to be filled in by
filesystems (and other IO targets) that know they are 64-bit clean and
don't have any 32-bit limits in their IO path.
It turns out that our 32-bit value for that limit was bogus. On 32-bit,
the VM layer is limited by the page cache to only 32-bit index values,
but our logic for that was confusing and actually wrong. We used to
define that value to
(((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1)
which is actually odd in several ways: it limits the index to 31 bits,
and then it limits files so that they can't have data in that last byte
of a page that has the highest 31-bit index (ie page index 0x7fffffff).
Neither of those limitations make sense. The index is actually the full
32 bit unsigned value, and we can use that whole full page. So the
maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG".
However, we do wan tto avoid the maximum index, because we have code
that iterates over the page indexes, and we don't want that code to
overflow. So the maximum size of a file on a 32-bit host should
actually be one page less than the full 32-bit index.
So the actual limit is ULONG_MAX << PAGE_SHIFT. That means that we will
not actually be using the page of that last index (ULONG_MAX), but we
can grow a file up to that limit.
The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug
Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5
volume. It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one
byte less), but the actual true VM limit is one page less than 16TiB.
This was invisible until commit
c2a9737f45e2 ("vfs,mm: fix a dead loop
in truncate_inode_pages_range()"), which started applying that
MAX_LFS_FILESIZE limit to block devices too.
NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is
actually just the offset type itself (loff_t), which is signed. But for
clarity, on 64-bit, just use the maximum signed value, and don't make
people have to count the number of 'f' characters in the hex constant.
So just use LLONG_MAX for the 64-bit case. That was what the value had
been before too, just written out as a hex constant.
Fixes:
c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
Reported-and-tested-by: Doug Nazar <nazard@nazar.ca>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael Tinoco <rafael.tinoco@linaro.org>
[backported to 4.4.y due to requests of failed LTP tests - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Tue, 16 Jan 2018 07:29:50 +0000 (08:29 +0100)]
gpio: No NULL owner
commit
7d18f0a14aa6a0d6bad39111c1fb655f07f71d59 upstream.
Sometimes a GPIO is fetched with NULL as parent device, and
that is just fine. So under these circumstances, avoid using
dev_name() to provide a name for the GPIO line.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Wed, 5 Oct 2016 00:34:30 +0000 (20:34 -0400)]
x86/crypto, x86/fpu: Remove X86_FEATURE_EAGER_FPU #ifdef from the crc32c code
commit
02f39b2379fb81557ae864ec8f85421c0250c954 upstream.
The crypto code was checking both use_eager_fpu() and
defined(X86_FEATURE_EAGER_FPU). The latter was nonsensical, so
remove it. This will avoid breakage when we remove
X86_FEATURE_EAGER_FPU.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pbonzini@redhat.com
Link: http://lkml.kernel.org/r/1475627678-20788-2-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin Easton [Sat, 7 Apr 2018 15:40:33 +0000 (11:40 -0400)]
af_key: Always verify length of provided sadb_key
commit
4b66af2d6356a00e94bcdea3e7fea324e8b5c6f4 upstream.
Key extensions (struct sadb_key) include a user-specified number of key
bits. The kernel uses that number to determine how much key data to copy
out of the message in pfkey_msg2xfrm_state().
The length of the sadb_key message must be verified to be long enough,
even in the case of SADB_X_AALG_NULL. Furthermore, the sadb_key_len value
must be long enough to include both the key data and the struct sadb_key
itself.
Introduce a helper function verify_key_len(), and call it from
parse_exthdrs() where other exthdr types are similarly checked for
correctness.
Signed-off-by: Kevin Easton <kevin@guarana.org>
Reported-by: syzbot+5022a34ca5a3d49b84223653fab632dfb7b4cf37@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Sun, 24 Jan 2016 22:38:06 +0000 (14:38 -0800)]
x86/fpu: Fix math emulation in eager fpu mode
commit
4ecd16ec7059390b430af34bd8bc3ca2b5dcef9a upstream.
Systems without an FPU are generally old and therefore use lazy FPU
switching. Unsurprisingly, math emulation in eager FPU mode is a
bit buggy. Fix it.
There were two bugs involving kernel code trying to use the FPU
registers in eager mode even if they didn't exist and one BUG_ON()
that was incorrect.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/b4b8d112436bd6fab866e1b4011131507e8d7fbe.1453675014.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Sun, 24 Jan 2016 22:38:07 +0000 (14:38 -0800)]
x86/fpu: Fix FNSAVE usage in eagerfpu mode
commit
5ed73f40735c68d8a656b46d09b1885d3b8740ae upstream.
In eager fpu mode, having deactivated FPU without immediately
reloading some other context is illegal. Therefore, to recover from
FNSAVE, we can't just deactivate the state -- we need to reload it
if we're not actively context switching.
We had this wrong in fpu__save() and fpu__copy(). Fix both.
__kernel_fpu_begin() was fine -- add a comment.
This fixes a warning triggerable with nofxsr eagerfpu=on.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/60662444e13c76f06e23c15c5dcdba31b4ac3d67.1453675014.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Wed, 5 Oct 2016 00:34:31 +0000 (20:34 -0400)]
x86/fpu: Hard-disable lazy FPU mode
commit
ca6938a1cd8a1c5e861a99b67f84ac166fc2b9e7 upstream.
Since commit:
58122bf1d856 ("x86/fpu: Default eagerfpu=on on all CPUs")
... in Linux 4.6, eager FPU mode has been the default on all x86
systems, and no one has reported any regressions.
This patch removes the ability to enable lazy mode: use_eager_fpu()
becomes "return true" and all of the FPU mode selection machinery is
removed.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pbonzini@redhat.com
Link: http://lkml.kernel.org/r/1475627678-20788-3-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Fri, 11 Mar 2016 11:32:06 +0000 (12:32 +0100)]
x86/fpu: Fix eager-FPU handling on legacy FPU machines
commit
6e6867093de35141f0a76b66ac13f9f2e2c8e77a upstream.
i486 derived cores like Intel Quark support only the very old,
legacy x87 FPU (FSAVE/FRSTOR, CPUID bit FXSR is not set), and
our FPU code wasn't handling the saving and restoring there
properly in the 'eagerfpu' case.
So after we made eagerfpu the default for all CPU types:
58122bf1d856 x86/fpu: Default eagerfpu=on on all CPUs
these old FPU designs broke. First, Andy Shevchenko reported a splat:
WARNING: CPU: 0 PID: 823 at arch/x86/include/asm/fpu/internal.h:163 fpu__clear+0x8c/0x160
which was us trying to execute FXRSTOR on those machines even though
they don't support it.
After taking care of that, Bryan O'Donoghue reported that a simple FPU
test still failed because we weren't initializing the FPU state properly
on those machines.
Take care of all that.
Reported-and-tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20160311113206.GD4312@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yu-cheng Yu [Thu, 10 Mar 2016 00:28:54 +0000 (16:28 -0800)]
x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off")
commit
a65050c6f17e52442716138d48d0a47301a8344b upstream.
Leonid Shatz noticed that the SDM interpretation of the following
recent commit:
394db20ca240741 ("x86/fpu: Disable AVX when eagerfpu is off")
... is incorrect and that the original behavior of the FPU code was correct.
Because AVX is not stated in CR0 TS bit description, it was mistakenly
believed to be not supported for lazy context switch. This turns out
to be false:
Intel Software Developer's Manual Vol. 3A, Sec. 2.5 Control Registers:
'TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the x87 FPU/
MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch to be delayed until
an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4 instruction is actually executed
by the new task.'
Intel Software Developer's Manual Vol. 2A, Sec. 2.4 Instruction Exception
Specification:
'AVX instructions refer to exceptions by classes that include #NM
"Device Not Available" exception for lazy context switch.'
So revert the commit.
Reported-by: Leonid Shatz <leonid.shatz@ravellosystems.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457569734-3785-1-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Thu, 21 Jan 2016 23:24:31 +0000 (15:24 -0800)]
x86/fpu: Fix 'no387' regression
commit
f363938c70a04e6bc99023a5e0c44ef7879b903f upstream.
After fixing FPU option parsing, we now parse the 'no387' boot option
too early: no387 clears X86_FEATURE_FPU before it's even probed, so
the boot CPU promptly re-enables it.
I suspect it gets even more confused on SMP.
Fix the probing code to leave X86_FEATURE_FPU off if it's been
disabled by setup_clear_cpu_cap().
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Fixes:
4f81cbafcce2 ("x86/fpu: Fix early FPU command-line parsing")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Sun, 24 Jan 2016 22:38:10 +0000 (14:38 -0800)]
x86/fpu: Default eagerfpu=on on all CPUs
commit
58122bf1d856a4ea9581d62a07c557d997d46a19 upstream.
We have eager and lazy FPU modes, introduced in:
304bceda6a18 ("x86, fpu: use non-lazy fpu restore for processors supporting xsave")
The result is rather messy. There are two code paths in almost all
of the FPU code, and only one of them (the eager case) is tested
frequently, since most kernel developers have new enough hardware
that we use eagerfpu.
It seems that, on any remotely recent hardware, eagerfpu is a win:
glibc uses SSE2, so laziness is probably overoptimistic, and, in any
case, manipulating TS is far slower that saving and restoring the
full state. (Stores to CR0.TS are serializing and are poorly
optimized.)
To try to shake out any latent issues on old hardware, this changes
the default to eager on all CPUs. If no performance or functionality
problems show up, a subsequent patch could remove lazy mode entirely.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/ac290de61bf08d9cfc2664a4f5080257ffc1075a.1453675014.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
yu-cheng yu [Wed, 6 Jan 2016 22:24:54 +0000 (14:24 -0800)]
x86/fpu: Disable AVX when eagerfpu is off
commit
394db20ca240741a08d472173db13d6f6a6e5a28 upstream.
When "eagerfpu=off" is given as a command-line input, the kernel
should disable AVX support.
The Task Switched bit used for lazy context switching does not
support AVX. If AVX is enabled without eagerfpu context
switching, one task's AVX state could become corrupted or leak
to other tasks. This is a bug and has bad security implications.
This only affects systems that have AVX/AVX2/AVX512 and this
issue will be found only when one actually uses AVX/AVX2/AVX512
_AND_ does eagerfpu=off.
Reference: Intel Software Developer's Manual Vol. 3A
Sec. 2.5 Control Registers:
TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the
x87 FPU/ MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch
to be delayed until an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4
instruction is actually executed by the new task.
Sec. 13.4.1 Using the TS Flag to Control the Saving of the X87
FPU and SSE State
When the TS flag is set, the processor monitors the instruction
stream for x87 FPU, MMX, SSE instructions. When the processor
detects one of these instructions, it raises a
device-not-available exeception (#NM) prior to executing the
instruction.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-5-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
yu-cheng yu [Wed, 6 Jan 2016 22:24:53 +0000 (14:24 -0800)]
x86/fpu: Disable MPX when eagerfpu is off
commit
a5fe93a549c54838063d2952dd9643b0b18aa67f upstream.
This issue is a fallout from the command-line parsing move.
When "eagerfpu=off" is given as a command-line input, the kernel
should disable MPX support. The decision for turning off MPX was
made in fpu__init_system_ctx_switch(), which is after the
selection of the XSAVE format. This patch fixes it by getting
that decision done earlier in fpu__init_system_xstate().
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-4-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Mon, 7 Dec 2015 09:39:41 +0000 (10:39 +0100)]
x86/cpufeature: Remove unused and seldomly used cpu_has_xx macros
commit
362f924b64ba0f4be2ee0cb697690c33d40be721 upstream.
Those are stupid and code should use static_cpu_has_safe() or
boot_cpu_has() instead. Kill the least used and unused ones.
The remaining ones need more careful inspection before a conversion can
happen. On the TODO.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1449481182-27541-4-git-send-email-bp@alien8.de
Cc: David Sterba <dsterba@suse.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Juergen Gross [Tue, 17 Nov 2015 12:05:43 +0000 (13:05 +0100)]
x86: Remove unused function cpu_has_ht_siblings()
commit
ed29210cd6a67425026e78aa298fa434e11a74e3 upstream.
It is used nowhere.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: http://lkml.kernel.org/r/1447761943-770-1-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
yu-cheng yu [Wed, 6 Jan 2016 22:24:51 +0000 (14:24 -0800)]
x86/fpu: Fix early FPU command-line parsing
commit
4f81cbafcce2c603db7865e9d0e461f7947d77d4 upstream.
The function fpu__init_system() is executed before
parse_early_param(). This causes wrong FPU configuration. This
patch fixes this issue by parsing boot_command_line in the
beginning of fpu__init_system().
With all four patches in this series, each parameter disables
features as the following:
eagerfpu=off: eagerfpu, avx, avx2, avx512, mpx
no387: fpu
nofxsr: fxsr, fxsropt, xmm
noxsave: xsave, xsaveopt, xsaves, xsavec, avx, avx2, avx512,
mpx, xgetbv1 noxsaveopt: xsaveopt
noxsaves: xsaves
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-2-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 13 Jun 2018 14:15:29 +0000 (16:15 +0200)]
Linux 4.4.137
Eric Dumazet [Tue, 5 Jun 2018 13:06:19 +0000 (06:06 -0700)]
net: metrics: add proper netlink validation
[ Upstream commit
5b5e7a0de2bbf2a1afcd9f49e940010e9fb80d53 ]
Before using nla_get_u32(), better make sure the attribute
is of the proper size.
Code recently was changed, but bug has been there from beginning
of git.
BUG: KMSAN: uninit-value in rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746
CPU: 1 PID: 14139 Comm: syz-executor6 Not tainted 4.17.0-rc5+ #103
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:113
kmsan_report+0x149/0x260 mm/kmsan/kmsan.c:1084
__msan_warning_32+0x6e/0xc0 mm/kmsan/kmsan_instr.c:686
rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746
fib_dump_info+0xc42/0x2190 net/ipv4/fib_semantics.c:1361
rtmsg_fib+0x65f/0x8c0 net/ipv4/fib_semantics.c:419
fib_table_insert+0x2314/0x2b50 net/ipv4/fib_trie.c:1287
inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779
rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x455a09
RSP: 002b:
00007faae5fd8c68 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007faae5fd96d4 RCX:
0000000000455a09
RDX:
0000000000000000 RSI:
0000000020000000 RDI:
0000000000000013
RBP:
000000000072bea0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
00000000000005d0 R14:
00000000006fdc20 R15:
0000000000000000
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:294 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:529
fib_convert_metrics net/ipv4/fib_semantics.c:1056 [inline]
fib_create_info+0x2d46/0x9dc0 net/ipv4/fib_semantics.c:1150
fib_table_insert+0x3e4/0x2b50 net/ipv4/fib_trie.c:1146
inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779
rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315
kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2753 [inline]
__kmalloc_node_track_caller+0xb32/0x11b0 mm/slub.c:4395
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:988 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
a919525ad832 ("net: Move fib_convert_metrics to metrics file")
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Wed, 23 May 2018 00:04:49 +0000 (17:04 -0700)]
net: phy: broadcom: Fix bcm_write_exp()
[ Upstream commit
79fb218d97980d4fee9a64f4c8ff05289364ba25 ]
On newer PHYs, we need to select the expansion register to write with
setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior
to being migrated to generic code under bcm-phy-lib.c which
unfortunately used the older implementation from the BCM54xx days.
Fix this by creating an inline stub: bcm_write_exp_sel() which adds the
correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY
and BCM7xxx PHY drivers which require setting these bits.
broadcom.c is unchanged because some PHYs even use a different selector
method, so let them specify it directly (e.g: SerDes secondary selector).
Fixes:
a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 5 Jun 2018 16:25:19 +0000 (09:25 -0700)]
rtnetlink: validate attributes in do_setlink()
[ Upstream commit
644c7eebbfd59e72982d11ec6cc7d39af12450ae ]
It seems that rtnl_group_changelink() can call do_setlink
while a prior call to validate_linkmsg(dev = NULL, ...) could
not validate IFLA_ADDRESS / IFLA_BROADCAST
Make sure do_setlink() calls validate_linkmsg() instead
of letting its callers having this responsibility.
With help from Dmitry Vyukov, thanks a lot !
BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:199 [inline]
BUG: KMSAN: uninit-value in eth_prepare_mac_addr_change net/ethernet/eth.c:275 [inline]
BUG: KMSAN: uninit-value in eth_mac_addr+0x203/0x2b0 net/ethernet/eth.c:308
CPU: 1 PID: 8695 Comm: syz-executor3 Not tainted 4.17.0-rc5+ #103
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:113
kmsan_report+0x149/0x260 mm/kmsan/kmsan.c:1084
__msan_warning_32+0x6e/0xc0 mm/kmsan/kmsan_instr.c:686
is_valid_ether_addr include/linux/etherdevice.h:199 [inline]
eth_prepare_mac_addr_change net/ethernet/eth.c:275 [inline]
eth_mac_addr+0x203/0x2b0 net/ethernet/eth.c:308
dev_set_mac_address+0x261/0x530 net/core/dev.c:7157
do_setlink+0xbc3/0x5fc0 net/core/rtnetlink.c:2317
rtnl_group_changelink net/core/rtnetlink.c:2824 [inline]
rtnl_newlink+0x1fe9/0x37a0 net/core/rtnetlink.c:2976
rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x455a09
RSP: 002b:
00007fc07480ec68 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007fc07480f6d4 RCX:
0000000000455a09
RDX:
0000000000000000 RSI:
00000000200003c0 RDI:
0000000000000014
RBP:
000000000072bea0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
00000000000005d0 R14:
00000000006fdc20 R15:
0000000000000000
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:294 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685
kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527
__msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:478
do_setlink+0xb84/0x5fc0 net/core/rtnetlink.c:2315
rtnl_group_changelink net/core/rtnetlink.c:2824 [inline]
rtnl_newlink+0x1fe9/0x37a0 net/core/rtnetlink.c:2976
rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315
kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2753 [inline]
__kmalloc_node_track_caller+0xb32/0x11b0 mm/slub.c:4395
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:988 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg net/socket.c:639 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
__sys_sendmsg net/socket.c:2155 [inline]
__do_sys_sendmsg net/socket.c:2164 [inline]
__se_sys_sendmsg net/socket.c:2162 [inline]
__x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
e7ed828f10bd ("netlink: support setting devgroup parameters")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 4 Jun 2018 14:46:01 +0000 (17:46 +0300)]
team: use netdev_features_t instead of u32
[ Upstream commit
25ea66544bfd1d9df1b7e1502f8717e85fa1e6e6 ]
This code was introduced in 2011 around the same time that we made
netdev_features_t a u64 type. These days a u32 is not big enough to
hold all the potential features.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jack Morgenstein [Wed, 23 May 2018 07:41:59 +0000 (10:41 +0300)]
net/mlx4: Fix irq-unsafe spinlock usage
[ Upstream commit
d546b67cda015fb92bfee93d5dc0ceadb91deaee ]
spin_lock/unlock was used instead of spin_un/lock_irq
in a procedure used in process space, on a spinlock
which can be grabbed in an interrupt.
This caused the stack trace below to be displayed (on kernel
4.17.0-rc1 compiled with Lock Debugging enabled):
[ 154.661474] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[ 154.668909] 4.17.0-rc1-rdma_rc_mlx+ #3 Tainted: G I
[ 154.675856] -----------------------------------------------------
[ 154.682706] modprobe/10159 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 154.690254]
00000000f3b0e495 (&(&qp_table->lock)->rlock){+.+.}, at: mlx4_qp_remove+0x20/0x50 [mlx4_core]
[ 154.700927]
and this task is already holding:
[ 154.707461]
0000000094373b5d (&(&cq->lock)->rlock/1){....}, at: destroy_qp_common+0x111/0x560 [mlx4_ib]
[ 154.718028] which would create a new lock dependency:
[ 154.723705] (&(&cq->lock)->rlock/1){....} -> (&(&qp_table->lock)->rlock){+.+.}
[ 154.731922]
but this new dependency connects a SOFTIRQ-irq-safe lock:
[ 154.740798] (&(&cq->lock)->rlock){..-.}
[ 154.740800]
... which became SOFTIRQ-irq-safe at:
[ 154.752163] _raw_spin_lock_irqsave+0x3e/0x50
[ 154.757163] mlx4_ib_poll_cq+0x36/0x900 [mlx4_ib]
[ 154.762554] ipoib_tx_poll+0x4a/0xf0 [ib_ipoib]
...
to a SOFTIRQ-irq-unsafe lock:
[ 154.815603] (&(&qp_table->lock)->rlock){+.+.}
[ 154.815604]
... which became SOFTIRQ-irq-unsafe at:
[ 154.827718] ...
[ 154.827720] _raw_spin_lock+0x35/0x50
[ 154.833912] mlx4_qp_lookup+0x1e/0x50 [mlx4_core]
[ 154.839302] mlx4_flow_attach+0x3f/0x3d0 [mlx4_core]
Since mlx4_qp_lookup() is called only in process space, we can
simply replace the spin_un/lock calls with spin_un/lock_irq calls.
Fixes:
6dc06c08bef1 ("net/mlx4: Fix the check in attaching steering rules")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shahed Shaikh [Mon, 21 May 2018 19:31:47 +0000 (12:31 -0700)]
qed: Fix mask for physical address in ILT entry
[ Upstream commit
fdd13dd350dda1826579eb5c333d76b14513b812 ]
ILT entry requires 12 bit right shifted physical address.
Existing mask for ILT entry of physical address i.e.
ILT_ENTRY_PHY_ADDR_MASK is not sufficient to handle 64bit
address because upper 8 bits of 64 bit address were getting
masked which resulted in completer abort error on
PCIe bus due to invalid address.
Fix that mask to handle 64bit physical address.
Fixes:
fe56b9e6a8d9 ("qed: Add module with basic common support")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willem de Bruijn [Thu, 24 May 2018 22:10:30 +0000 (18:10 -0400)]
packet: fix reserve calculation
[ Upstream commit
9aad13b087ab0a588cd68259de618f100053360e ]
Commit
b84bbaf7a6c8 ("packet: in packet_snd start writing at link
layer allocation") ensures that packet_snd always starts writing
the link layer header in reserved headroom allocated for this
purpose.
This is needed because packets may be shorter than hard_header_len,
in which case the space up to hard_header_len may be zeroed. But
that necessary padding is not accounted for in skb->len.
The fix, however, is buggy. It calls skb_push, which grows skb->len
when moving skb->data back. But in this case packet length should not
change.
Instead, call skb_reserve, which moves both skb->data and skb->tail
back, without changing length.
Fixes:
b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation")
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Thu, 31 May 2018 09:18:29 +0000 (11:18 +0200)]
net: usb: cdc_mbim: add flag FLAG_SEND_ZLP
[ Upstream commit
9f7c728332e8966084242fcd951aa46583bc308c ]
Testing Telit LM940 with ICMP packets > 14552 bytes revealed that
the modem needs FLAG_SEND_ZLP to properly work, otherwise the cdc
mbim data interface won't be anymore responsive.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>