OSDN Git Service
Joel Stanley [Wed, 2 Sep 2020 00:00:11 +0000 (09:30 +0930)]
powerpc: Warn about use of smt_snooze_delay
It's not done anything for a long time. Save the percpu variable, and
emit a warning to remind users to not expect it to do anything.
This uses pr_warn_once instead of pr_warn_ratelimit as testing
'ppc64_cpu --smt=off' on a 24 core / 4 SMT system showed the warning
to be noisy, as the online/offline loop is slow.
Fixes:
3fa8cad82b94 ("powerpc/pseries/cpuidle: smt-snooze-delay cleanup.")
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902000012.3440389-1-joel@jms.id.au
Joel Stanley [Thu, 1 Aug 2019 05:16:30 +0000 (14:46 +0930)]
powerpc/powernv: Print helpful message when cores guarded
Often the firmware will guard out cores after a crash. This often
undesirable, and is not immediately noticeable.
This adds an informative message when a CPU device tree nodes are
marked bad in the device tree.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[mpe: Use an eye-catcher that's less likely to get us in trouble]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190801051630.5804-1-joel@jms.id.au
Leonardo Bras [Wed, 5 Aug 2020 03:04:55 +0000 (00:04 -0300)]
powerpc/pseries/iommu: Allow bigger 64bit window by removing default DMA window
On LoPAR "DMA Window Manipulation Calls", it's recommended to remove the
default DMA window for the device, before attempting to configure a DDW,
in order to make the maximum resources available for the next DDW to be
created.
This is a requirement for using DDW on devices in which hypervisor
allows only one DMA window.
If setting up a new DDW fails anywhere after the removal of this
default DMA window, it's needed to restore the default DMA window.
For this, an implementation of ibm,reset-pe-dma-windows rtas call is
needed:
Platforms supporting the DDW option starting with LoPAR level 2.7 implement
ibm,ddw-extensions. The first extension available (index 2) carries the
token for ibm,reset-pe-dma-windows rtas call, which is used to restore
the default DMA window for a device, if it has been deleted.
It does so by resetting the TCE table allocation for the PE to it's
boot time value, available in "ibm,dma-window" device tree node.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Tested-by: David Dai <zdai@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200805030455.123024-5-leobras.c@gmail.com
Leonardo Bras [Wed, 5 Aug 2020 03:04:54 +0000 (00:04 -0300)]
powerpc/pseries/iommu: Move window-removing part of remove_ddw into remove_dma_window
Move the window-removing part of remove_ddw into a new function
(remove_dma_window), so it can be used to remove other DMA windows.
It's useful for removing DMA windows that don't create DIRECT64_PROPNAME
property, like the default DMA window from the device, which uses
"ibm,dma-window".
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Tested-by: David Dai <zdai@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200805030455.123024-4-leobras.c@gmail.com
Leonardo Bras [Wed, 5 Aug 2020 03:04:53 +0000 (00:04 -0300)]
powerpc/pseries/iommu: Update call to ibm, query-pe-dma-windows
>From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can make the number of
outputs from "ibm,query-pe-dma-windows" go from 5 to 6.
This change of output size is meant to expand the address size of
largest_available_block PE TCE from 32-bit to 64-bit, which ends up
shifting page_size and migration_capable.
This ends up requiring the update of
ddw_query_response->largest_available_block from u32 to u64, and manually
assigning the values from the buffer into this struct, according to
output size.
Also, a routine was created for helping reading the ddw extensions as
suggested by LoPAR: First reading the size of the extension array from
index 0, checking if the property exists, and then returning it's value.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Tested-by: David Dai <zdai@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200805030455.123024-3-leobras.c@gmail.com
Leonardo Bras [Wed, 5 Aug 2020 03:04:52 +0000 (00:04 -0300)]
powerpc/pseries/iommu: Create defines for operations in ibm, ddw-applicable
Create defines to help handling ibm,ddw-applicable values, avoiding
confusion about the index of given operations.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Tested-by: David Dai <zdai@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200805030455.123024-2-leobras.c@gmail.com
Jordan Niethe [Thu, 27 Aug 2020 04:05:56 +0000 (14:05 +1000)]
powerpc: Update documentation of ISA versions for Power10
Update the CPU to ISA Version Mapping document to include Power10 and
ISA v3.1.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Make sure ISA reference is unique]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200827040556.1783-1-jniethe5@gmail.com
Russell Currey [Fri, 28 Aug 2020 02:05:42 +0000 (12:05 +1000)]
powerpc/tools: Remove 90 line limit in checkpatch script
As of commit
bdc48fa11e46, scripts/checkpatch.pl now has a default line
length warning of 100 characters. The powerpc wrapper script was using
a length of 90 instead of 80 in order to make checkpatch less
restrictive, but now it's making it more restrictive instead.
I think it makes sense to just use the default value now.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200828020542.393022-1-ruscur@russell.cc
Jordan Niethe [Mon, 24 Aug 2020 13:12:31 +0000 (23:12 +1000)]
selftests/powerpc: Fix prefixes in alignment_handler signal handler
The signal handler in the alignment handler self test has the ability
to jump over the instruction that triggered the signal. It does this
by incrementing the PT_NIP in the user context by 4. If it were a
prefixed instruction this will mean that the suffix is then executed
which is incorrect. Instead check if the major opcode indicates a
prefixed instruction (e.g. it is 1) and if so increment PT_NIP by 8.
If ISA v3.1 is not available treat it as a word instruction even if
the major opcode is 1.
Fixes:
620a6473df36 ("selftests/powerpc: Add prefixed loads/stores to alignment_handler test")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix 32-bit build, rename haveprefixes to prefixes_enabled]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200824131231.14008-1-jniethe5@gmail.com
Jordan Niethe [Tue, 25 Aug 2020 03:51:47 +0000 (13:51 +1000)]
powerpc/boot: Update Makefile comment for 64bit wrapper
As of commit
147c05168fc8 ("powerpc/boot: Add support for 64bit little
endian wrapper") the comment in the Makefile is misleading. The wrapper
packaging 64bit kernel may built as a 32 or 64 bit elf. Update the
comment to reflect this.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200825035147.3239-1-jniethe5@gmail.com
Michael Ellerman [Wed, 19 Aug 2020 01:57:04 +0000 (11:57 +1000)]
powerpc/64: Remove unused generic_secondary_thread_init()
The last caller was removed in 2014 in commit
fb5a515704d7 ("powerpc:
Remove platforms/wsp and associated pieces").
As Jordan noticed even though there are no callers, the code above in
fsl_secondary_thread_init() falls through into
generic_secondary_thread_init(). So we can remove the _GLOBAL but not
the body of the function.
However because fsl_secondary_thread_init() is inside #ifdef
CONFIG_PPC_BOOK3E, we can never reach the body of
generic_secondary_thread_init() unless CONFIG_PPC_BOOK3E is enabled,
so we can wrap the whole thing in a single #ifdef.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015704.1976364-1-mpe@ellerman.id.au
Michael Ellerman [Wed, 19 Aug 2020 01:57:27 +0000 (11:57 +1000)]
selftests/powerpc: Properly handle failure in switch_endian_test
On older CPUs the switch_endian() syscall doesn't work. Currently that
causes the switch_endian_test to just crash. Instead detect the
failure and properly exit with a failure message.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-9-mpe@ellerman.id.au
Michael Ellerman [Wed, 19 Aug 2020 01:57:26 +0000 (11:57 +1000)]
selftests/powerpc: Don't touch VMX/VSX on older CPUs
If we're running on a CPU without VMX/VSX then don't touch them. This
is fragile, the compiler could spill a VMX/VSX register and break the
test anyway. But in practice it seems to work, ie. the test runs to
completion on a system without VSX with this change.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-8-mpe@ellerman.id.au
Michael Ellerman [Wed, 19 Aug 2020 01:57:25 +0000 (11:57 +1000)]
selftests/powerpc: Skip L3 bank test on older CPUs
This is a test of specific piece of logic in isa207-common.c, which is
only used on Power8 or later. So skip it on older CPUs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-7-mpe@ellerman.id.au
Michael Ellerman [Wed, 19 Aug 2020 01:57:24 +0000 (11:57 +1000)]
selftests/powerpc: Skip security tests on older CPUs
Both these tests use PMU events that only work on newer CPUs, so skip
them on older CPUs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-6-mpe@ellerman.id.au
Michael Ellerman [Wed, 19 Aug 2020 01:57:23 +0000 (11:57 +1000)]
selftests/powerpc: Don't run DSCR tests on old systems
The DSCR tests fail on systems that don't have DSCR, so check for the
DSCR in hwcap and skip if it's not present.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-5-mpe@ellerman.id.au
Michael Ellerman [Wed, 19 Aug 2020 01:57:22 +0000 (11:57 +1000)]
selftests/powerpc: Include asm/cputable.h from utils.h
utils.h provides have_hwcap() and have_hwcap2() which check for a
feature bit. Those bits are defined in asm/cputable.h, so include it
in utils.h so users of utils.h don't have to do it manually.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-4-mpe@ellerman.id.au
Michael Ellerman [Wed, 19 Aug 2020 01:57:21 +0000 (11:57 +1000)]
selftests/powerpc: Move set_dscr() into rfi_flush.c
This version of set_dscr() was added for the RFI flush test, and is
fairly specific to it. It also clashes with the version of set_dscr()
in dscr/dscr.h. So move it into the RFI flush test where it's used.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-3-mpe@ellerman.id.au
Michael Ellerman [Wed, 19 Aug 2020 01:57:20 +0000 (11:57 +1000)]
selftests/powerpc: Give the bad_accesses test longer to run
On older systems this test takes longer to run (duh), give it five
minutes which is long enough on a G5 970FX @ 1.6GHz.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-2-mpe@ellerman.id.au
Michael Ellerman [Wed, 19 Aug 2020 01:57:19 +0000 (11:57 +1000)]
selftests/powerpc: Make using_hash_mmu() work on Cell & PowerMac
These platforms don't show the MMU in /proc/cpuinfo, but they always
use hash, so teach using_hash_mmu() that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-1-mpe@ellerman.id.au
Michael Ellerman [Thu, 13 Aug 2020 01:34:45 +0000 (11:34 +1000)]
selftests/powerpc: Run tm-tmspr test for longer
This test creates some threads, which write to TM SPRs, and then makes
sure the registers maintain the correct values across context switches
and contention with other threads.
But currently the test finishes almost instantaneously, which reduces
the chance of it hitting an interesting condition.
So increase the number of loops, so it runs a bit longer, though still
less than 2s on a Power8.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200813013445.686464-3-mpe@ellerman.id.au
Michael Ellerman [Thu, 13 Aug 2020 01:34:44 +0000 (11:34 +1000)]
selftests/powerpc: Don't use setaffinity in tm-tmspr
This test tries to set affinity to CPUs that don't exist, especially
if the set of online CPUs doesn't start at 0.
But there's no real reason for it to use setaffinity in the first
place, it's just trying to create lots of threads to cause contention.
So drop the setaffinity entirely.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200813013445.686464-2-mpe@ellerman.id.au
Michael Ellerman [Thu, 13 Aug 2020 01:34:43 +0000 (11:34 +1000)]
selftests/powerpc: Fix TM tests when CPU 0 is offline
Several of the TM tests fail spuriously if CPU 0 is offline, because
they blindly try to affinitise to CPU 0.
Fix them by picking any online CPU and using that instead.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200813013445.686464-1-mpe@ellerman.id.au
Oliver O'Halloran [Tue, 18 Aug 2020 04:45:57 +0000 (14:45 +1000)]
powerpc/pseries/eeh: Fix dumb linebreaks
These annoy me every time I see them. Why are they here? They're not even
needed for 80cols compliance.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200818044557.135497-1-oohall@gmail.com
Christophe Leroy [Mon, 17 Aug 2020 05:46:39 +0000 (05:46 +0000)]
powerpc/process: Remove unnecessary #ifdef CONFIG_FUNCTION_GRAPH_TRACER
ftrace_graph_ret_addr() is always defined and returns 'ip' when
CONFIG_FUNCTION GRAPH_TRACER is not set.
So the #ifdef is not needed, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9d11143d4e27ba8274369a926968756917584868.1597643153.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 12 Aug 2020 12:25:17 +0000 (12:25 +0000)]
powerpc/uaccess: Add pre-update addressing to __get_user_asm() and __put_user_asm()
Enable pre-update addressing mode in __get_user_asm() and __put_user_asm()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/13041c7df39e89ddf574ea0cdc6dedfdd9734140.1597235091.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 12 Aug 2020 12:25:16 +0000 (12:25 +0000)]
powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()
At the time being, __put_user()/__get_user() and friends only use
D-form addressing, with 0 offset. Ex:
lwz reg1, 0(reg2)
Give the compiler the opportunity to use other adressing modes
whenever possible, to get more optimised code.
Hereunder is a small exemple:
struct test {
u32 item1;
u16 item2;
u8 item3;
u64 item4;
};
int set_test_user(struct test __user *from, struct test __user *to)
{
int err;
u32 item1;
u16 item2;
u8 item3;
u64 item4;
err = __get_user(item1, &from->item1);
err |= __get_user(item2, &from->item2);
err |= __get_user(item3, &from->item3);
err |= __get_user(item4, &from->item4);
err |= __put_user(item1, &to->item1);
err |= __put_user(item2, &to->item2);
err |= __put_user(item3, &to->item3);
err |= __put_user(item4, &to->item4);
return err;
}
Before the patch:
00000df0 <set_test_user>:
df0: 94 21 ff f0 stwu r1,-16(r1)
df4: 39 40 00 00 li r10,0
df8: 93 c1 00 08 stw r30,8(r1)
dfc: 93 e1 00 0c stw r31,12(r1)
e00: 7d 49 53 78 mr r9,r10
e04: 80 a3 00 00 lwz r5,0(r3)
e08: 38 e3 00 04 addi r7,r3,4
e0c: 7d 46 53 78 mr r6,r10
e10: a0 e7 00 00 lhz r7,0(r7)
e14: 7d 29 33 78 or r9,r9,r6
e18: 39 03 00 06 addi r8,r3,6
e1c: 7d 46 53 78 mr r6,r10
e20: 89 08 00 00 lbz r8,0(r8)
e24: 7d 29 33 78 or r9,r9,r6
e28: 38 63 00 08 addi r3,r3,8
e2c: 7d 46 53 78 mr r6,r10
e30: 83 c3 00 00 lwz r30,0(r3)
e34: 83 e3 00 04 lwz r31,4(r3)
e38: 7d 29 33 78 or r9,r9,r6
e3c: 7d 43 53 78 mr r3,r10
e40: 90 a4 00 00 stw r5,0(r4)
e44: 7d 29 1b 78 or r9,r9,r3
e48: 38 c4 00 04 addi r6,r4,4
e4c: 7d 43 53 78 mr r3,r10
e50: b0 e6 00 00 sth r7,0(r6)
e54: 7d 29 1b 78 or r9,r9,r3
e58: 38 e4 00 06 addi r7,r4,6
e5c: 7d 43 53 78 mr r3,r10
e60: 99 07 00 00 stb r8,0(r7)
e64: 7d 23 1b 78 or r3,r9,r3
e68: 38 84 00 08 addi r4,r4,8
e6c: 93 c4 00 00 stw r30,0(r4)
e70: 93 e4 00 04 stw r31,4(r4)
e74: 7c 63 53 78 or r3,r3,r10
e78: 83 c1 00 08 lwz r30,8(r1)
e7c: 83 e1 00 0c lwz r31,12(r1)
e80: 38 21 00 10 addi r1,r1,16
e84: 4e 80 00 20 blr
After the patch:
00000dbc <set_test_user>:
dbc: 39 40 00 00 li r10,0
dc0: 7d 49 53 78 mr r9,r10
dc4: 80 03 00 00 lwz r0,0(r3)
dc8: 7d 48 53 78 mr r8,r10
dcc: a1 63 00 04 lhz r11,4(r3)
dd0: 7d 29 43 78 or r9,r9,r8
dd4: 7d 48 53 78 mr r8,r10
dd8: 88 a3 00 06 lbz r5,6(r3)
ddc: 7d 29 43 78 or r9,r9,r8
de0: 7d 48 53 78 mr r8,r10
de4: 80 c3 00 08 lwz r6,8(r3)
de8: 80 e3 00 0c lwz r7,12(r3)
dec: 7d 29 43 78 or r9,r9,r8
df0: 7d 43 53 78 mr r3,r10
df4: 90 04 00 00 stw r0,0(r4)
df8: 7d 29 1b 78 or r9,r9,r3
dfc: 7d 43 53 78 mr r3,r10
e00: b1 64 00 04 sth r11,4(r4)
e04: 7d 29 1b 78 or r9,r9,r3
e08: 7d 43 53 78 mr r3,r10
e0c: 98 a4 00 06 stb r5,6(r4)
e10: 7d 23 1b 78 or r3,r9,r3
e14: 90 c4 00 08 stw r6,8(r4)
e18: 90 e4 00 0c stw r7,12(r4)
e1c: 7c 63 53 78 or r3,r3,r10
e20: 4e 80 00 20 blr
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c27bc4e598daf3bbb225de7a1f5c52121cf1e279.1597235091.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 14 Aug 2020 05:49:29 +0000 (05:49 +0000)]
powerpc: Remove flush_instruction_cache() on 8xx
flush_instruction_cache() is never used on 8xx, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/245cabd8f291facac8c8c5fd370e361a69e02860.1597384145.git.christophe.leroy@csgroup.eu
Stephen Rothwell [Wed, 12 Aug 2020 08:10:36 +0000 (18:10 +1000)]
powerpc: unrel_branch_check.sh: enable the use of llvm-objdump v9, 10 or 11
Currently, using llvm-objtool, this script just silently succeeds without
actually do the intended checking. So this updates it to work properly.
Firstly, llvm-objdump does not add target symbol names to the end
of branches in its asm output, so we have to drop the branch to
__start_initialization_multiplatform using its address.
Secondly, v9 and 10 specify branch targets as .+<offset>, so we convert
those to actual addresses.
Thirdly, v10 and 11 error out on a vmlinux if given the -R option
complaining that it is "not a dynamic object". The -R does not make
any difference to the asm output, so remove it.
Lastly, v11 produces asm that is very similar to Gnu objtool (at least
as far as branches are concerned), so no further changes are necessary
to make it work.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200812081036.7969-3-sfr@canb.auug.org.au
Stephen Rothwell [Wed, 12 Aug 2020 08:10:35 +0000 (18:10 +1000)]
powerpc: unrel_branch_check.sh: use nm to find symbol value
This is considerably faster then parsing the objdump asm output. It will
also make the enabling of llvm-objdump a little easier.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200812081036.7969-2-sfr@canb.auug.org.au
Stephen Rothwell [Tue, 11 Aug 2020 14:04:34 +0000 (00:04 +1000)]
powerpc: unrel_branch_check.sh: exit silently for early errors
If we can't find the address of __end_interrupts, then we still exit
successfully as that is the current behaviour.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-8-sfr@canb.auug.org.au
Stephen Rothwell [Tue, 11 Aug 2020 14:04:33 +0000 (00:04 +1000)]
powerpc: unrel_branch_check.sh: fix up the file header
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-7-sfr@canb.auug.org.au
Stephen Rothwell [Tue, 11 Aug 2020 14:04:32 +0000 (00:04 +1000)]
powerpc: unrel_branch_check.sh: simplify and tidy up the final loop
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-6-sfr@canb.auug.org.au
Stephen Rothwell [Tue, 11 Aug 2020 14:04:31 +0000 (00:04 +1000)]
powerpc: unrel_branch_check.sh: convert grep | sed | awk to just sed
Also start using sed -E and make all the separate expressions into a
single one with comments. Pull the stripping of condition registers
back into the sed command.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-5-sfr@canb.auug.org.au
Stephen Rothwell [Tue, 11 Aug 2020 14:04:30 +0000 (00:04 +1000)]
powerpc: unrel_branch_check.sh: simplify objdump's asm output
We don't use the raw hex instruction dump, so elide it and adjust the
following expressions.
Also use \s instead of [[:space:]] everywhere.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-4-sfr@canb.auug.org.au
Stephen Rothwell [Tue, 11 Aug 2020 14:04:29 +0000 (00:04 +1000)]
powerpc: unrel_branch_check.sh: simplify and combine some executions
Also some minor style changes.
There should still be no change in behaviour.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-3-sfr@canb.auug.org.au
Stephen Rothwell [Tue, 11 Aug 2020 14:04:28 +0000 (00:04 +1000)]
powerpc: unrel_branch_check.sh: fix shellcheck complaints
No functional change
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-2-sfr@canb.auug.org.au
Scott Cheloha [Tue, 11 Aug 2020 01:51:15 +0000 (20:51 -0500)]
pseries/drmem: don't cache node id in drmem_lmb struct
At memory hot-remove time we can retrieve an LMB's nid from its
corresponding memory_block. There is no need to store the nid
in multiple locations.
Note that lmb_to_memblock() uses find_memory_block() to get the
corresponding memory_block. As find_memory_block() runs in sub-linear
time this approach is negligibly slower than what we do at present.
In exchange for this lookup at hot-remove time we no longer need to
call memory_add_physaddr_to_nid() during drmem_init() for each LMB.
On powerpc, memory_add_physaddr_to_nid() is a linear search, so this
spares us an O(n^2) initialization during boot.
On systems with many LMBs that initialization overhead is palpable and
disruptive. For example, on a box with 249854 LMBs we're seeing
drmem_init() take upwards of 30 seconds to complete:
[ 53.721639] drmem: initializing drmem v2
[ 80.604346] watchdog: BUG: soft lockup - CPU#65 stuck for 23s! [swapper/0:1]
[ 80.604377] Modules linked in:
[ 80.604389] CPU: 65 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc2+ #4
[ 80.604397] NIP:
c0000000000a4980 LR:
c0000000000a4940 CTR:
0000000000000000
[ 80.604407] REGS:
c0002dbff8493830 TRAP: 0901 Not tainted (5.6.0-rc2+)
[ 80.604412] MSR:
8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR:
44000248 XER:
0000000d
[ 80.604431] CFAR:
c0000000000a4a38 IRQMASK: 0
[ 80.604431] GPR00:
c0000000000a4940 c0002dbff8493ac0 c000000001904400 c0003cfffffede30
[ 80.604431] GPR04:
0000000000000000 c000000000f4095a 000000000000002f 0000000010000000
[ 80.604431] GPR08:
c0000bf7ecdb7fb8 c0000bf7ecc2d3c8 0000000000000008 c00c0002fdfb2001
[ 80.604431] GPR12:
0000000000000000 c00000001e8ec200
[ 80.604477] NIP [
c0000000000a4980] hot_add_scn_to_nid+0xa0/0x3e0
[ 80.604486] LR [
c0000000000a4940] hot_add_scn_to_nid+0x60/0x3e0
[ 80.604492] Call Trace:
[ 80.604498] [
c0002dbff8493ac0] [
c0000000000a4940] hot_add_scn_to_nid+0x60/0x3e0 (unreliable)
[ 80.604509] [
c0002dbff8493b20] [
c000000000087c10] memory_add_physaddr_to_nid+0x20/0x60
[ 80.604521] [
c0002dbff8493b40] [
c0000000010d4880] drmem_init+0x25c/0x2f0
[ 80.604530] [
c0002dbff8493c10] [
c000000000010154] do_one_initcall+0x64/0x2c0
[ 80.604540] [
c0002dbff8493ce0] [
c0000000010c4aa0] kernel_init_freeable+0x2d8/0x3a0
[ 80.604550] [
c0002dbff8493db0] [
c000000000010824] kernel_init+0x2c/0x148
[ 80.604560] [
c0002dbff8493e20] [
c00000000000b648] ret_from_kernel_thread+0x5c/0x74
[ 80.604567] Instruction dump:
[ 80.604574]
392918e8 e9490000 e90a000a e92a0000 80ea000c 1d080018 3908ffe8 7d094214
[ 80.604586]
7fa94040 419d00dc e9490010 714a0088 <
2faa0008>
409e00ac e9490000 7fbe5040
[ 89.047390] drmem: 249854 LMB(s)
With a patched kernel on the same machine we're no longer seeing the
soft lockup. drmem_init() now completes in negligible time, even when
the LMB count is large.
Fixes:
b2d3b5ee66f2 ("powerpc/pseries: Track LMB nid instead of using device tree")
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811015115.63677-1-cheloha@linux.ibm.com
Christophe Leroy [Fri, 14 Aug 2020 05:56:27 +0000 (05:56 +0000)]
powerpc: Rewrite FSL_BOOKE flush_cache_instruction() in C
Nothing prevents flush_cache_instruction() from being writen in C.
Do it to improve readability and maintainability.
This function is only use by low level callers, it is not
intended to be used by module. Don't export it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f989eff8296800c427622c0985384148404e4f0b.1597384512.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 14 Aug 2020 05:56:26 +0000 (05:56 +0000)]
powerpc: Rewrite 4xx flush_cache_instruction() in C
Nothing prevents flush_cache_instruction() from being writen in C.
Do it to improve readability and maintainability.
This function is very small and isn't called from assembly,
make it static inline in asm/cacheflush.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/93d93fc69b4b3ad3ceba2fc0756333c0c0245bb7.1597384512.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 14 Aug 2020 05:56:25 +0000 (05:56 +0000)]
powerpc: Move flush_instruction_cache() prototype in asm/cacheflush.h
flush_instruction_cache() belongs to the cache flushing function
family.
Move its prototype in asm/cacheflush.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/993445b5227e8ca2f0e38bcc9ea3dfea6e865920.1597384512.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 14 Aug 2020 05:56:24 +0000 (05:56 +0000)]
powerpc: Remove flush_instruction_cache for book3s/32
The only callers of flush_instruction_cache() are:
arch/powerpc/kernel/swsusp_booke.S: bl flush_instruction_cache
arch/powerpc/mm/nohash/40x.c: flush_instruction_cache();
arch/powerpc/mm/nohash/44x.c: flush_instruction_cache();
arch/powerpc/mm/nohash/fsl_booke.c: flush_instruction_cache();
arch/powerpc/platforms/44x/machine_check.c: flush_instruction_cache();
arch/powerpc/platforms/44x/machine_check.c: flush_instruction_cache();
This function is not used by book3s/32, drop it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/50098f49877cea0f46730a9df82dcabf84160e4b.1597384512.git.christophe.leroy@csgroup.eu
Nathan Lynch [Thu, 13 Aug 2020 15:11:31 +0000 (10:11 -0500)]
powerpc/pseries: explicitly reschedule during drmem_lmb list traversal
The drmem lmb list can have hundreds of thousands of entries, and
unfortunately lookups take the form of linear searches. As long as
this is the case, traversals have the potential to monopolize the CPU
and provoke lockup reports, workqueue stalls, and the like unless
they explicitly yield.
Rather than placing cond_resched() calls within various
for_each_drmem_lmb() loop blocks in the code, put it in the iteration
expression of the loop macro itself so users can't omit it.
Introduce a drmem_lmb_next() iteration helper function which calls
cond_resched() at a regular interval during array traversal. Each
iteration of the loop in DLPAR code paths can involve around ten RTAS
calls which can each take up to 250us, so this ensures the check is
performed at worst every few milliseconds.
Fixes:
6c6ea53725b3 ("powerpc/mm: Separate ibm, dynamic-memory data from DT format")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200813151131.2070161-1-nathanl@linux.ibm.com
Christophe Leroy [Fri, 14 Aug 2020 06:54:49 +0000 (06:54 +0000)]
powerpc: Drop _nmask_and_or_msr()
_nmask_and_or_msr() is only used at two places to set MSR_IP.
The SYNC is unnecessary as the users are not PowerPC 601.
Can be easily writen in C.
Do it, and drop _nmask_and_or_msr()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c2d2b8dfb8dd677026b26dffc8d31070c38a6b89.1597388079.git.christophe.leroy@csgroup.eu
Stephen Kitt [Fri, 7 Aug 2020 15:27:13 +0000 (17:27 +0200)]
powerpc: Use simple i2c probe function
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe
function ("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200807152713.381588-1-steve@sk2.org
Scott Cheloha [Mon, 27 Jul 2020 18:46:05 +0000 (13:46 -0500)]
powerpc/pseries: new lparcfg key/value pair: partition_affinity_score
The H_GetPerformanceCounterInfo (GPCI) PHYP hypercall has a subcall,
Affinity_Domain_Info_By_Partition, which returns, among other things,
a "partition affinity score" for a given LPAR. This score, a value on
[0-100], represents the processor-memory affinity for the LPAR in
question. A score of 0 indicates the worst possible affinity while a
score of 100 indicates perfect affinity. The score can be used to
reason about performance.
This patch adds the score for the local LPAR to the lparcfg procfile
under a new 'partition_affinity_score' key.
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727184605.2945095-2-cheloha@linux.ibm.com
Scott Cheloha [Mon, 27 Jul 2020 18:46:04 +0000 (13:46 -0500)]
powerpc/perf: consolidate GPCI hcall structs into asm/hvcall.h
The H_GetPerformanceCounterInfo (GPCI) hypercall input/output structs are
useful to modules outside of perf/, so move them into asm/hvcall.h to live
alongside the other powerpc hypercall structs.
Leave the perf-specific GPCI stuff in perf/hv-gpci.h.
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727184605.2945095-1-cheloha@linux.ibm.com
Christophe Leroy [Thu, 6 Aug 2020 12:20:35 +0000 (12:20 +0000)]
powerpc: drop hard_reset_now() and poweroff_now() declaration
Those function have never existed. Drop their declaration.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/edcdd72a36495d25213c0256c8022367458e0d19.1596716418.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 6 Aug 2020 12:20:34 +0000 (12:20 +0000)]
powerpc/fpu: Drop cvt_fd() and cvt_df()
Those two functions have been unused since commit identified below.
Drop them.
Fixes:
31bfdb036f12 ("powerpc: Use instruction emulation infrastructure to handle alignment faults")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5641ada199b8dd2af16ad00a66084cf974f2704.1596716418.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 6 Aug 2020 12:19:46 +0000 (12:19 +0000)]
powerpc/irq: Drop forward declaration of struct irqaction
Since the commit identified below, the forward declaration of
struct irqaction is useless. Drop it.
Fixes:
b709c0832824 ("ppc64: move stack switching up in interrupt processing")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e0bcdabac45fcd26c02d7df273bd4a5827c6033d.1596716375.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 6 Aug 2020 12:19:06 +0000 (12:19 +0000)]
powerpc/hwirq: Remove stale forward irq_chip declaration
Since commit identified below, the forward declaration of
struct irq_chip is useless (was struct hw_interrupt_type at that time)
Remove it, together with the associated comment.
Fixes:
c0ad90a32fb6 ("[PATCH] genirq: add ->retrigger() irq op to consolidate hw_irq_resend()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fbe58d27cf128d5fe581e4510ded8701858f268e.1596716328.git.christophe.leroy@csgroup.eu
Colin Ian King [Thu, 6 Aug 2020 10:29:01 +0000 (11:29 +0100)]
macintosh: windfarm: remove detatch debug containing spelling mistakes
There are spelling mistakes in two debug messages. As recommended
by Wolfram Sang, these can be removed as there is plenty of debug
in the driver core.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200806102901.44988-1-colin.king@canonical.com
Christophe Leroy [Thu, 6 Aug 2020 06:01:42 +0000 (06:01 +0000)]
powerpc/32s: Fix assembler warning about r0
The assembler says:
arch/powerpc/kernel/head_32.S:1095: Warning: invalid register expression
It's objecting to the use of r0 as the RA argument. That's because
when RA = 0 the literal value 0 is used, rather than the content of
r0, making the use of r0 in the source potentially confusing.
Fix it to use a literal 0, the generated code is identical.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2b69ac8e1cddff6f808fc7415907179eab4aae9e.1596693679.git.christophe.leroy@csgroup.eu
Oliver O'Halloran [Tue, 4 Aug 2020 00:54:10 +0000 (10:54 +1000)]
powerpc/nx: Don't pack struct coprocessor_request_block
Building with W=1 results in the following warning:
In file included from arch/powerpc/platforms/powernv/vas-fault.c:16:
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
159 | } __packed;
| ^
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
cc1: all warnings being treated as errors
This happens because coprocessor_request_block includes several
sub-structures with an alignment specified using the __aligned(XX)
attribute. The problem comes from coprocessor_request_block having the
__packed attribute. Packing the structure causes the preferred alignment of
the nested structures to be ignored and we get the warnings as a result.
This isn't a problem in practice since the struct is defined with explicit
padding in the form of reserved fields, but we'd like to get rid of the
spurious warnings. The simplest solution is to remove the packed attribute
and use a BUILD_BUG_ON() to ensure the struct is the correct (expected by
HW) size compile time.
Also add a __aligned(128) to the request block structure since Book4 for P8
suggests the HW requires it to be aligned to a 128 byte boundary. There's a
similar requirement for P9 since the COPY and PASTE instructions used to
invoke VAS/NX accelerators operates on a cache line boundary.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-7-oohall@gmail.com
Oliver O'Halloran [Tue, 4 Aug 2020 00:54:08 +0000 (10:54 +1000)]
powerpc/powernv: Fix spurious kerneldoc warnings in opal-prd.c
Comments opening with /** are parsed by kerneldoc and this causes the
following warning to be printed:
arch/powerpc/platforms/powernv/opal-prd.c:31: warning: cannot understand
function prototype: 'struct opal_prd_msg_queue_item '
opal_prd_mesg_queue_item is an internal data structure so there's no real
need for it to be documented at all. Fix up the comment to squash the
warning.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-5-oohall@gmail.com
Oliver O'Halloran [Tue, 4 Aug 2020 00:54:07 +0000 (10:54 +1000)]
powerpc/powernv: Staticify functions without prototypes
There's a few scattered in the powernv platform.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-4-oohall@gmail.com
Oliver O'Halloran [Tue, 4 Aug 2020 00:54:06 +0000 (10:54 +1000)]
powerpc/powernv: Include asm/powernv.h from the local powernv.h
The asm/powernv.h header provides prototypes for functions which need to be
called by non-powernv platform code. Also include it in the powernv.h
that's local to the platform directory to squash some warnings about
non-static functions missing prototypes.
Also include powernv.h since from opal-memcons.c since it has the
prototypes for the memcons wrangling functions which are used for the opal
and ultravisor msglog.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-3-oohall@gmail.com
Oliver O'Halloran [Tue, 4 Aug 2020 00:54:05 +0000 (10:54 +1000)]
powerpc/powernv/smp: Fix spurious DBG() warning
When building with W=1 we get the following warning:
arch/powerpc/platforms/powernv/smp.c: In function ‘pnv_smp_cpu_kill_self’:
arch/powerpc/platforms/powernv/smp.c:276:16: error: suggest braces around
empty body in an ‘if’ statement [-Werror=empty-body]
276 | cpu, srr1);
| ^
cc1: all warnings being treated as errors
The full context is this block:
if (srr1 && !generic_check_cpu_restart(cpu))
DBG("CPU%d Unexpected exit while offline srr1=%lx!\n",
cpu, srr1);
When building with DEBUG undefined DBG() expands to nothing and GCC emits
the warning due to the lack of braces around an empty statement.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-2-oohall@gmail.com
Colin Ian King [Tue, 4 Aug 2020 17:43:16 +0000 (18:43 +0100)]
powerpc/oprofile: fix spelling mistake "contex" -> "context"
There is a spelling mistake in a pr_debug message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804174316.402425-1-colin.king@canonical.com
Aneesh Kumar K.V [Fri, 31 Jul 2020 11:35:00 +0000 (17:05 +0530)]
powerpc/vmemmap: Don't warn if we don't find a mapping vmemmap list entry
Now that we are handling vmemmap list allocation failure correctly, don't
WARN in section deactivate when we don't find a mapping vmemmap list entry.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731113500.248306-2-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Fri, 31 Jul 2020 11:34:59 +0000 (17:04 +0530)]
powerpc/vmemmap: Fix memory leak with vmemmap list allocation failures.
If we fail to allocate vmemmap list, we don't keep track of allocated
vmemmap block buf. Hence on section deactivate we skip vmemmap block
buf free. This results in memory leak.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731113500.248306-1-aneesh.kumar@linux.ibm.com
zhengbin [Tue, 19 Nov 2019 06:14:34 +0000 (14:14 +0800)]
powerpc/powernv: Remove set but not used variable 'parent'
Fix gcc '-Wunused-but-set-variable' warning:
arch/powerpc/platforms/powernv/pci-ioda.c: In function pnv_ioda_configure_pe:
arch/powerpc/platforms/powernv/pci-ioda.c:867:18: warning: variable parent set but not used [-Wunused-but-set-variable]
It is not used since commit
b131a8425c34 ("powerpc/powernv:
Set PELTV for compound PEs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574144074-142032-6-git-send-email-zhengbin13@huawei.com
zhengbin [Tue, 19 Nov 2019 06:14:31 +0000 (14:14 +0800)]
powerpc/perf: Remove set but not used variable 'target'
Fix gcc '-Wunused-but-set-variable' warning:
arch/powerpc/perf/imc-pmu.c: In function trace_imc_event_init:
arch/powerpc/perf/imc-pmu.c:1292:22: warning: variable target set but not used [-Wunused-but-set-variable]
It is introduced by commit
012ae244845f ("powerpc/perf:
Trace imc PMU functions"), but never used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574144074-142032-3-git-send-email-zhengbin13@huawei.com
zhengbin [Tue, 19 Nov 2019 06:14:30 +0000 (14:14 +0800)]
powerpc/fadump: Remove set but not used variable 'elf'
Fix gcc '-Wunused-but-set-variable' warning:
arch/powerpc/kernel/fadump.c: In function fadump_update_elfcore_header:
arch/powerpc/kernel/fadump.c:790:17: warning: variable elf set but not used [-Wunused-but-set-variable]
It is introduced by commit
ebaeb5ae2437 ("fadump:
Convert firmware-assisted cpu state dump data into elf notes."),
but never used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574144074-142032-2-git-send-email-zhengbin13@huawei.com
Biwen Li [Wed, 27 May 2020 03:42:28 +0000 (11:42 +0800)]
powerc/dtc/t1024rdb: remove interrupts property
Since the interrupt pin for RTC DS1339 is not connected
to the CPU on T1024RDB, remove the interrupt property
from the device tree.
This also fix the following warning for hwclock.util-linux:
$ hwclock.util-linux
hwclock.util-linux: select() to /dev/rtc0
to wait for clock tick timed out
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527034228.23793-2-biwen.li@oss.nxp.com
Biwen Li [Wed, 27 May 2020 03:42:27 +0000 (11:42 +0800)]
powerpc/dts/t4240rdb: remove interrupts property
Since the interrupt pin for RTC DS1374 is not connected
to the CPU on T4240RDB, remove the interrupt property
from the device tree.
This also fix the following warning for hwclock.util-linux:
$ hwclock.util-linux
hwclock.util-linux: select() to /dev/rtc0
to wait for clock tick timed out
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527034228.23793-1-biwen.li@oss.nxp.com
Frederic Barrat [Tue, 7 Apr 2020 11:56:01 +0000 (13:56 +0200)]
cxl: Rework error message for incompatible slots
Improve the error message shown if a capi adapter is plugged on a
capi-incompatible slot directly under the PHB (no intermediate switch).
Fixes:
5632874311db ("cxl: Add support for POWER9 DD2")
Cc: stable@vger.kernel.org # 4.14+
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200407115601.25453-1-fbarrat@linux.ibm.com
Frederic Barrat [Fri, 3 Apr 2020 15:38:38 +0000 (17:38 +0200)]
ocxl: Remove custom service to allocate interrupts
We now allocate interrupts through xive directly.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-5-fbarrat@linux.ibm.com
Frederic Barrat [Fri, 3 Apr 2020 15:38:37 +0000 (17:38 +0200)]
ocxl: Don't return trigger page when allocating an interrupt
Existing users of ocxl_link_irq_alloc() have been converted to obtain
the trigger page of an interrupt through xive directly, we therefore
have no need to return the trigger page when allocating an interrupt.
It also allows ocxl to use the xive native interface to allocate
interrupts, instead of its custom service.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-4-fbarrat@linux.ibm.com
Frederic Barrat [Fri, 3 Apr 2020 15:38:36 +0000 (17:38 +0200)]
ocxl: Access interrupt trigger page from xive directly
We can access the trigger page through standard APIs so let's use it
and avoid saving it when allocating the interrupt. It will also allow
to simplify allocation in a later patch.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-3-fbarrat@linux.ibm.com
Frederic Barrat [Fri, 3 Apr 2020 15:38:35 +0000 (17:38 +0200)]
scsi: cxlflash: Access interrupt trigger page from xive directly
xive is already mapping the trigger page in kernel space and it can be
accessed through standard APIs, so let's reuse it and simplify the code.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Matthew R. Ochs <mrochs@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-2-fbarrat@linux.ibm.com
Nicholas Mc Guire [Wed, 4 Jul 2018 08:03:27 +0000 (10:03 +0200)]
powerpc/icp-hv: Fix missing of_node_put() in success path
Both of_find_compatible_node() and of_find_node_by_type() will return
a refcounted node on success - thus for the success path the node must
be explicitly released with a of_node_put().
Fixes:
0b05ac6e2480 ("powerpc/xics: Rewrite XICS driver")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1530691407-3991-1-git-send-email-hofrat@osadl.org
Nicholas Mc Guire [Mon, 2 Jul 2018 09:08:16 +0000 (11:08 +0200)]
powerpc/pseries: Fix missing of_node_put() in rng_init()
The call to of_find_compatible_node() returns a node pointer with
refcount incremented thus it must be explicitly decremented here
before returning.
Fixes:
a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1530522496-14816-1-git-send-email-hofrat@osadl.org
Linus Torvalds [Sun, 23 Aug 2020 21:08:43 +0000 (14:08 -0700)]
Linux 5.9-rc2
Linus Torvalds [Sun, 23 Aug 2020 18:37:23 +0000 (11:37 -0700)]
Merge tag 'powerpc-5.9-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Add perf support for emitting extended registers for power10.
- A fix for CPU hotplug on pseries, where on large/loaded systems we
may not wait long enough for the CPU to be offlined, leading to
crashes.
- Addition of a raw cputable entry for Power10, which is not required
to boot, but is required to make our PMU setup work correctly in
guests.
- Three fixes for the recent changes on 32-bit Book3S to move modules
into their own segment for strict RWX.
- A fix for a recent change in our powernv PCI code that could lead to
crashes.
- A change to our perf interrupt accounting to avoid soft lockups when
using some events, found by syzkaller.
- A change in the way we handle power loss events from the hypervisor
on pseries. We no longer immediately shut down if we're told we're
running on a UPS.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.
* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
powerpc/pseries: Do not initiate shutdown when system is running on UPS
powerpc/perf: Fix soft lockups due to missed interrupt accounting
powerpc/powernv/pci: Fix possible crash when releasing DMA resources
powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
powerpc/fixmap: Fix the size of the early debug area
powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
powerpc/kernel: Cleanup machine check function declarations
powerpc: Add POWER10 raw mode cputable entry
powerpc/perf: Add extended regs support for power10 platform
powerpc/perf: Add support for outputting extended regs in perf intr_regs
powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
Linus Torvalds [Sun, 23 Aug 2020 18:21:16 +0000 (11:21 -0700)]
Merge tag 'x86-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for x86 which removes the RDPID usage from the paranoid
entry path and unconditionally uses LSL to retrieve the CPU number.
RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid
expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values
and restores them either when leaving the run loop, on preemption or
when going out to user space. MSR_TSX_AUX is part of that lazy MSR
set, so after writing the guest value and before the lazy restore any
exception using the paranoid entry will read the guest value and use
it as CPU number to retrieve the GSBASE value for the current CPU when
FSGSBASE is enabled. As RDPID is only used in that particular entry
path, there is no reason to burden VMENTER/EXIT with two extra MSR
writes. Remove the RDPID optimization, which is not even backed by
numbers from the paranoid entry path instead"
* tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
Linus Torvalds [Sun, 23 Aug 2020 18:15:14 +0000 (11:15 -0700)]
Merge tag 'perf-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single update for perf on x86 which has support for the broken down
bandwith counters"
* tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
Linus Torvalds [Sun, 23 Aug 2020 18:08:32 +0000 (11:08 -0700)]
Merge tag 'efi-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
- Enforce NX on RO data in mixed EFI mode
- Destroy workqueue in an error handling path to prevent UAF
- Stop argument parser at '--' which is the delimiter for init
- Treat a NULL command line pointer as empty instead of dereferncing it
unconditionally.
- Handle an unterminated command line correctly
- Cleanup the 32bit code leftovers and remove obsolete documentation
* tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: efi: remove description of efi=old_map
efi/x86: Move 32-bit code into efi_32.c
efi/libstub: Handle unterminated cmdline
efi/libstub: Handle NULL cmdline
efi/libstub: Stop parsing arguments at "--"
efi: add missed destroy_workqueue when efisubsys_init fails
efi/x86: Mark kernel rodata non-executable for mixed mode
Linus Torvalds [Sun, 23 Aug 2020 18:05:47 +0000 (11:05 -0700)]
Merge tag 'core-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip
Pull entry fix from Thomas Gleixner:
"A single bug fix for the common entry code.
The transcription of the x86 version messed up the reload of the
syscall number from pt_regs after ptrace and seccomp which breaks
syscall number rewriting"
* tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
core/entry: Respect syscall number rewrites
Linus Torvalds [Sun, 23 Aug 2020 17:57:19 +0000 (10:57 -0700)]
Merge tag 'edac_urgent_for_v5.9_rc2' of git://git./linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"A single fix correcting a reversed error severity determination check
which lead to a recoverable error getting marked as fatal, by Tony
Luck"
* tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
Linus Torvalds [Sun, 23 Aug 2020 17:52:33 +0000 (10:52 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
"Nothing earth shattering here, lots of small fixes (f.e. missing RCU
protection, bad ref counting, missing memset(), etc.) all over the
place:
1) Use get_file_rcu() in task_file iterator, from Yonghong Song.
2) There are two ways to set remote source MAC addresses in macvlan
driver, but only one of which validates things properly. Fix this.
From Alvin Šipraga.
3) Missing of_node_put() in gianfar probing, from Sumera
Priyadarsini.
4) Preserve device wanted feature bits across multiple netlink
ethtool requests, from Maxim Mikityanskiy.
5) Fix rcu_sched stall in task and task_file bpf iterators, from
Yonghong Song.
6) Avoid reset after device destroy in ena driver, from Shay
Agroskin.
7) Missing memset() in netlink policy export reallocation path, from
Johannes Berg.
8) Fix info leak in __smc_diag_dump(), from Peilin Ye.
9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
Tomlinson.
10) Fix number of data stream negotiation in SCTP, from David Laight.
11) Fix double free in connection tracker action module, from Alaa
Hleihel.
12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: nexthop: don't allow empty NHA_GROUP
bpf: Fix two typos in uapi/linux/bpf.h
net: dsa: b53: check for timeout
tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
net: sctp: Fix negotiation of the number of data streams.
dt-bindings: net: renesas, ether: Improve schema validation
gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
hv_netvsc: Remove "unlikely" from netvsc_select_queue
bpf: selftests: global_funcs: Check err_str before strstr
bpf: xdp: Fix XDP mode when no mode flags specified
selftests/bpf: Remove test_align leftovers
tools/resolve_btfids: Fix sections with wrong alignment
net/smc: Prevent kernel-infoleak in __smc_diag_dump()
sfc: fix build warnings on 32-bit
net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
libbpf: Fix map index used in error message
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
net: atlantic: Use readx_poll_timeout() for large timeout
...
Linus Torvalds [Sun, 23 Aug 2020 00:11:38 +0000 (17:11 -0700)]
Merge branch 'work.epoll' of git://git./linux/kernel/git/viro/vfs
Pull epoll fixes from Al Viro:
"Fix reference counting and clean up exit paths"
* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_epoll_ctl(): clean the failure exits up a bit
epoll: Keep a reference on files added to the check list
Al Viro [Sat, 22 Aug 2020 22:25:52 +0000 (18:25 -0400)]
do_epoll_ctl(): clean the failure exits up a bit
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Marc Zyngier [Wed, 19 Aug 2020 16:12:17 +0000 (17:12 +0100)]
epoll: Keep a reference on files added to the check list
When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.
However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nikolay Aleksandrov [Sat, 22 Aug 2020 12:06:36 +0000 (15:06 +0300)]
net: nexthop: don't allow empty NHA_GROUP
Currently the nexthop code will use an empty NHA_GROUP attribute, but it
requires at least 1 entry in order to function properly. Otherwise we
end up derefencing null or random pointers all over the place due to not
having any nh_grp_entry members allocated, nexthop code relies on having at
least the first member present. Empty NHA_GROUP doesn't make any sense so
just disallow it.
Also add a WARN_ON for any future users of nexthop_create_group().
BUG: kernel NULL pointer dereference, address:
0000000000000080
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 558 Comm: ip Not tainted 5.9.0-rc1+ #93
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:fib_check_nexthop+0x4a/0xaa
Code: 0f 84 83 00 00 00 48 c7 02 80 03 f7 81 c3 40 80 fe fe 75 12 b8 ea ff ff ff 48 85 d2 74 6b 48 c7 02 40 03 f7 81 c3 48 8b 40 10 <48> 8b 80 80 00 00 00 eb 36 80 78 1a 00 74 12 b8 ea ff ff ff 48 85
RSP: 0018:
ffff88807983ba00 EFLAGS:
00010213
RAX:
0000000000000000 RBX:
ffff88807983bc00 RCX:
0000000000000000
RDX:
ffff88807983bc00 RSI:
0000000000000000 RDI:
ffff88807bdd0a80
RBP:
ffff88807983baf8 R08:
0000000000000dc0 R09:
000000000000040a
R10:
0000000000000000 R11:
ffff88807bdd0ae8 R12:
0000000000000000
R13:
0000000000000000 R14:
ffff88807bea3100 R15:
0000000000000001
FS:
00007f10db393700(0000) GS:
ffff88807dc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000080 CR3:
000000007bd0f004 CR4:
00000000003706f0
Call Trace:
fib_create_info+0x64d/0xaf7
fib_table_insert+0xf6/0x581
? __vma_adjust+0x3b6/0x4d4
inet_rtm_newroute+0x56/0x70
rtnetlink_rcv_msg+0x1e3/0x20d
? rtnl_calcit.isra.0+0xb8/0xb8
netlink_rcv_skb+0x5b/0xac
netlink_unicast+0xfa/0x17b
netlink_sendmsg+0x334/0x353
sock_sendmsg_nosec+0xf/0x3f
____sys_sendmsg+0x1a0/0x1fc
? copy_msghdr_from_user+0x4c/0x61
___sys_sendmsg+0x63/0x84
? handle_mm_fault+0xa39/0x11b5
? sockfd_lookup_light+0x72/0x9a
__sys_sendmsg+0x50/0x6e
do_syscall_64+0x54/0xbe
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f10dacc0bb7
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 8b 05 9a 4b 2b 00 85 c0 75 2e 48 63 ff 48 63 d2 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 b1 f2 2a 00 f7 d8 64 89 02 48
RSP: 002b:
00007ffcbe628bf8 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007ffcbe628f80 RCX:
00007f10dacc0bb7
RDX:
0000000000000000 RSI:
00007ffcbe628c60 RDI:
0000000000000003
RBP:
000000005f41099c R08:
0000000000000001 R09:
0000000000000008
R10:
00000000000005e9 R11:
0000000000000246 R12:
0000000000000000
R13:
0000000000000000 R14:
00007ffcbe628d70 R15:
0000563a86c6e440
Modules linked in:
CR2:
0000000000000080
CC: David Ahern <dsahern@gmail.com>
Fixes:
430a049190de ("nexthop: Add support for nexthop groups")
Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 22 Aug 2020 17:22:44 +0000 (10:22 -0700)]
Merge tag 'kbuild-fixes-v5.9' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- move -Wsign-compare warning from W=2 to W=3
- fix the keyword _restrict to __restrict in genksyms
- fix more bugs in qconf
* tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: replace deprecated QString::sprintf() with QTextStream
kconfig: qconf: remove redundant help in the info view
kconfig: qconf: remove qInfo() to get back Qt4 support
kconfig: qconf: remove unused colNr
kconfig: qconf: fix the popup menu in the ConfigInfoView window
kconfig: qconf: fix signal connection to invalid slots
genksyms: keywords: Use __restrict not _restrict
kbuild: remove redundant patterns in filter/filter-out
extract-cert: add static to local data
Makefile.extrawarn: Move sign-compare from W=2 to W=3
Linus Torvalds [Sat, 22 Aug 2020 17:17:36 +0000 (10:17 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Allow booting of late secondary CPUs affected by erratum
1418040
(currently they are parked if none of the early CPUs are affected by
this erratum).
- Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.
- Print a warning that untrusted guests without a CPU erratum
workaround (Cortex-A57 832075) may deadlock the affected system.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ARM64: vdso32: Install vdso32 from vdso_install
KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
arm64: Allow booting of late CPUs affected by erratum
1418040
arm64: Move handling of erratum
1418040 into C code
Linus Torvalds [Sat, 22 Aug 2020 17:12:49 +0000 (10:12 -0700)]
Merge tag 's390-5.9-3' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- a couple of fixes for storage key handling relevant for debugging
- add cond_resched into potentially slow subchannels scanning loop
- fixes for PF/VF linking and to ignore stale PCI configuration request
events
* tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: fix PF/VF linking on hot plug
s390/pci: re-introduce zpci_remove_device()
s390/pci: fix zpci_bus_link_virtfn()
s390/ptrace: fix storage key handling
s390/runtime_instrumentation: fix storage key handling
s390/pci: ignore stale configuration request event
s390/cio: add cond_resched() in the slow_eval_known_fn() loop
Linus Torvalds [Sat, 22 Aug 2020 17:03:05 +0000 (10:03 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- PAE and PKU bugfixes for x86
- selftests fix for new binutils
- MMU notifier fix for arm64
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
KVM: x86: fix access code passed to gva_to_gpa
selftests: kvm: Use a shorter encoding to clear RAX
Linus Torvalds [Sat, 22 Aug 2020 16:56:42 +0000 (09:56 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk
of the changes are in qla2xxx and ufs and all are mostly small and
definitely don't impact the core"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"
Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"
scsi: qla2xxx: Fix null pointer access during disconnect from subsystem
scsi: qla2xxx: Check if FW supports MQ before enabling
scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba
scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime
scsi: qla2xxx: Reduce noisy debug message
scsi: qla2xxx: Fix login timeout
scsi: qla2xxx: Indicate correct supported speeds for Mezz card
scsi: qla2xxx: Flush I/O on zone disable
scsi: qla2xxx: Flush all sessions on zone disable
scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
scsi: scsi_debug: Fix scp is NULL errors
scsi: zfcp: Fix use-after-free in request timeout handlers
scsi: ufs: No need to send Abort Task if the task in DB was cleared
scsi: ufs: Clean up completed request without interrupt notification
scsi: ufs: Improve interrupt handling for shared interrupts
scsi: ufs: Fix interrupt error message for shared interrupts
scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL
scsi: ufs-mediatek: Fix incorrect time to wait link status
...
Linus Torvalds [Sat, 22 Aug 2020 16:31:11 +0000 (09:31 -0700)]
Merge tag 'devicetree-fixes-for-5.9-2' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another set of DT fixes:
- restore range parsing error check
- workaround PCI range parsing with missing 'device_type' now
required
- correct description of 'phy-connection-type'
- fix erroneous matching on 'snps,dw-pcie' by 'intel,lgm-pcie' schema
- a couple of grammar and whitespace fixes
- update Shawn Guo's email"
* tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: vendor-prefixes: Remove trailing whitespace
dt-bindings: net: correct description of phy-connection-type
dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
of: address: Work around missing device_type property in pcie nodes
dt: writing-schema: Miscellaneous grammar fixes
dt-bindings: Use Shawn Guo's preferred e-mail for i.MX bindings
of/address: check for invalid range.cpu_addr
Geert Uytterhoeven [Wed, 19 Aug 2020 09:20:58 +0000 (11:20 +0200)]
dt-bindings: vendor-prefixes: Remove trailing whitespace
Fixes:
f516fb704d02fff2 ("dt-bindings: Whitespace clean-ups in schema files")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819092058.1526-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Will Deacon [Tue, 11 Aug 2020 10:27:25 +0000 (11:27 +0100)]
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
When an MMU notifier call results in unmapping a range that spans multiple
PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary,
since this avoids running into RCU stalls during VM teardown. Unfortunately,
if the VM is destroyed as a result of OOM, then blocking is not permitted
and the call to the scheduler triggers the following BUG():
| BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394
| in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper
| INFO: lockdep is turned off.
| CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1
| Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
| Call trace:
| dump_backtrace+0x0/0x284
| show_stack+0x1c/0x28
| dump_stack+0xf0/0x1a4
| ___might_sleep+0x2bc/0x2cc
| unmap_stage2_range+0x160/0x1ac
| kvm_unmap_hva_range+0x1a0/0x1c8
| kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8
| __mmu_notifier_invalidate_range_start+0x218/0x31c
| mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0
| __oom_reap_task_mm+0x128/0x268
| oom_reap_task+0xac/0x298
| oom_reaper+0x178/0x17c
| kthread+0x1e4/0x1fc
| ret_from_fork+0x10/0x30
Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we
only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier
flags.
Cc: <stable@vger.kernel.org>
Fixes:
8b3405e345b5 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <
20200811102725.7121-3-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Will Deacon [Tue, 11 Aug 2020 10:27:24 +0000 (11:27 +0100)]
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <
20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Madalin Bucur [Thu, 20 Aug 2020 10:02:04 +0000 (13:02 +0300)]
dt-bindings: net: correct description of phy-connection-type
The phy-connection-type parameter is described in ePAPR 1.1:
Specifies interface type between the Ethernet device and a physical
layer (PHY) device. The value of this property is specific to the
implementation.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://lore.kernel.org/r/1597917724-11127-1-git-send-email-madalin.bucur@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Fri, 21 Aug 2020 21:59:16 +0000 (14:59 -0700)]
Merge tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Make sure the head link cancelation includes async work
- Get rid of kiocb_wait_page_queue_init(), makes no sense to have it as
a separate function since you moved it into io_uring itself
- io_import_iovec cleanups (Pavel, me)
- Use system_unbound_wq for ring exit work, to avoid spawning tons of
these if we have tons of rings exiting at the same time
- Fix req->flags overflow flag manipulation (Pavel)
* tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block:
io_uring: kill extra iovec=NULL in import_iovec()
io_uring: comment on kfree(iovec) checks
io_uring: fix racy req->flags modification
io_uring: use system_unbound_wq for ring exit work
io_uring: cleanup io_import_iovec() of pre-mapped request
io_uring: get rid of kiocb_wait_page_queue_init()
io_uring: find and cancel head link async work on files exit
Rob Herring [Wed, 19 Aug 2020 17:58:16 +0000 (11:58 -0600)]
dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
The intel,lgm-pcie binding is matching on all snps,dw-pcie instances
which is wrong. Add a custom 'select' entry to fix this.
Fixes:
e54ea45a4955 ("dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller")
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Dilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Fri, 21 Aug 2020 21:44:48 +0000 (14:44 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"11 patches.
Subsystems affected by this: misc, mm/hugetlb, mm/vmalloc, mm/misc,
romfs, relay, uprobes, squashfs, mm/cma, mm/pagealloc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, page_alloc: fix core hung in free_pcppages_bulk()
mm: include CMA pages in lowmem_reserve at boot
squashfs: avoid bio_alloc() failure with 1Mbyte blocks
uprobes: __replace_page() avoid BUG in munlock_vma_page()
kernel/relay.c: fix memleak on destroy relay channel
romfs: fix uninitialized memory leak in romfs_dev_read()
mm/rodata_test.c: fix missing function declaration
mm/vunmap: add cond_resched() in vunmap_pmd_range
khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
hugetlb_cgroup: convert comma to semicolon
mailmap: add Andi Kleen
David S. Miller [Fri, 21 Aug 2020 19:54:50 +0000 (12:54 -0700)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2020-08-21
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 78 insertions(+), 24 deletions(-).
The main changes are:
1) three fixes in BPF task iterator logic, from Yonghong.
2) fix for compressed dwarf sections in vmlinux, from Jiri.
3) fix xdp attach regression, from Andrii.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 21 Aug 2020 19:32:42 +0000 (12:32 -0700)]
Merge tag 'riscv-for-linus-5.9-rc2' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- The CLINT driver has been split in two: one to handle the M-mode
CLINT (memory mapped and used on NOMMU systems) and one to handle the
S-mode CLINT (via SBI).
- The addition of SiFive's drivers to rv32_defconfig
* tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SiFive drivers to rv32_defconfig
dt-bindings: timer: Add CLINT bindings
RISC-V: Remove CLINT related code from timer and arch
clocksource/drivers: Add CLINT timer driver
RISC-V: Add mechanism to provide custom IPI operations