OSDN Git Service
Tao Ma [Mon, 21 Feb 2011 23:56:45 +0000 (07:56 +0800)]
ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.c
This is the 2nd step to remove the debug info of DISK_ALLOC.
So this patch removes all mlog(0,...) from localalloc.c and adds
the corresponding tracepoints. Different mlogs have different
solutions.
1. Some are replaced with trace event directly.
2. Some are replaced while some new parameters are added.
3. Some are combined into one trace events.
4. Some redundant mlogs are removed.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Tao Ma [Tue, 22 Feb 2011 00:21:10 +0000 (08:21 +0800)]
ocfs2: Remove mlog(0) from fs/ocfs2/alloc.c
This is the first try of replacing debug mlog(0,...) to
trace events. Wengang has did some work in his original
patch
http://oss.oracle.com/pipermail/ocfs2-devel/2009-November/005513.html
But he didn't finished it.
So this patch removes all mlog(0,...) from alloc.c and adds
the corresponding trace events. Different mlogs have different
solutions.
1. Some are replaced with trace event directly.
2. Some are replaced and some new parameters are added since
I think we need to know the btree owner in that case.
3. Some are combined into one trace events.
4. Some redundant mlogs are removed.
What's more, it defines some event classes so that we can use
them later.
Cc: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Wengang Wang [Mon, 21 Feb 2011 03:13:14 +0000 (11:13 +0800)]
ocfs2: Add ocfs2_trace.h.
About one year ago, Wengang Wang tried some first steps
to add tracepoints to ocfs2. Hiss original patch is here:
http://oss.oracle.com/pipermail/ocfs2-devel/2009-November/005512.html
But as Steven Rostedt indicated in his article
http://lwn.net/Articles/383362/, we'd better have our trace
files resides in fs/ocfs2, so I rewrited the patch using the
method Steven mentioned in that article.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Tao Ma [Mon, 7 Mar 2011 08:43:21 +0000 (16:43 +0800)]
ocfs2: Remove EXIT from masklog.
mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Tao Ma [Mon, 21 Feb 2011 03:10:44 +0000 (11:10 +0800)]
ocfs2: Remove ENTRY from masklog.
ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Linus Torvalds [Tue, 15 Mar 2011 22:48:13 +0000 (15:48 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (57 commits)
tidy the trailing symlinks traversal up
Turn resolution of trailing symlinks iterative everywhere
simplify link_path_walk() tail
Make trailing symlink resolution in path_lookupat() iterative
update nd->inode in __do_follow_link() instead of after do_follow_link()
pull handling of one pathname component into a helper
fs: allow AT_EMPTY_PATH in linkat(), limit that to CAP_DAC_READ_SEARCH
Allow passing O_PATH descriptors via SCM_RIGHTS datagrams
readlinkat(), fchownat() and fstatat() with empty relative pathnames
Allow O_PATH for symlinks
New kind of open files - "location only".
ext4: Copy fs UUID to superblock
ext3: Copy fs UUID to superblock.
vfs: Export file system uuid via /proc/<pid>/mountinfo
unistd.h: Add new syscalls numbers to asm-generic
x86: Add new syscalls for x86_64
x86: Add new syscalls for x86_32
fs: Remove i_nlink check from file system link callback
fs: Don't allow to create hardlink for deleted file
vfs: Add open by file handle support
...
Trond Myklebust [Tue, 15 Mar 2011 17:36:43 +0000 (13:36 -0400)]
VFS: Fix the nfs sillyrename regression in kernel 2.6.38
The new vfs locking scheme introduced in 2.6.38 breaks NFS sillyrename
because the latter relies on being able to determine the parent
directory of the dentry in the ->iput() callback in order to send the
appropriate unlink rpc call.
Looking at the code that cares about races with dput(), there doesn't
seem to be anything that specifically uses d_parent as a test for
whether or not there is a race:
- __d_lookup_rcu(), __d_lookup() all test for d_hashed() after d_parent
- shrink_dcache_for_umount() is safe since nothing else can rearrange
the dentries in that super block.
- have_submount(), select_parent() and d_genocide() can test for a
deletion if we set the DCACHE_DISCONNECTED flag when the dentry
is removed from the parent's d_subdirs list.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org (2.6.38, needs commit c826cb7dfce8 "dcache.c:
create helper function for duplicated functionality" )
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 15 Mar 2011 22:29:21 +0000 (15:29 -0700)]
dcache.c: create helper function for duplicated functionality
This creates a helper function for he "try to ascend into the parent
directory" case, which was written out in triplicate before. With all
the locking and subtle sequence number stuff, we really don't want to
duplicate that kind of code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Tue, 15 Mar 2011 02:20:34 +0000 (22:20 -0400)]
tidy the trailing symlinks traversal up
* pull the handling of current->total_link_count into
__do_follow_link()
* put the common "do ->put_link() if needed and path_put() the link"
stuff into a helper (put_link(nd, link, cookie))
* rename __do_follow_link() to follow_link(), while we are at it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Tue, 15 Mar 2011 01:54:55 +0000 (21:54 -0400)]
Turn resolution of trailing symlinks iterative everywhere
The last remaining place (resolution of nested symlink) converted
to the loop of the same kind we have in path_lookupat() and
path_openat().
Note that we still *do* have a recursion in pathname resolution;
can't avoid it, really. However, it's strictly for nested symlinks
now - i.e. ones in the middle of a pathname.
link_path_walk() has lost the tail now - it always walks everything
except the last component.
do_follow_link() renamed to nested_symlink() and moved down.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Tue, 15 Mar 2011 01:28:04 +0000 (21:28 -0400)]
simplify link_path_walk() tail
Now that link_path_walk() is called without LOOKUP_PARENT
only from do_follow_link(), we can simplify the checks in
last component handling. First of all, checking if we'd
arrived to a directory is not needed - the caller will check
it anyway. And LOOKUP_FOLLOW is guaranteed to be there,
since we only get to that place with nd->depth > 0.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 14 Mar 2011 23:54:59 +0000 (19:54 -0400)]
Make trailing symlink resolution in path_lookupat() iterative
Now the only caller of link_path_walk() that does *not* pass
LOOKUP_PARENT is do_follow_link()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Tue, 15 Mar 2011 00:01:51 +0000 (20:01 -0400)]
update nd->inode in __do_follow_link() instead of after do_follow_link()
... and note that we only need to do it for LAST_BIND symlinks
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 13 Mar 2011 23:58:58 +0000 (19:58 -0400)]
pull handling of one pathname component into a helper
new helper: walk_component(). Handles everything except symlinks;
returns negative on error, 0 on success and 1 on symlinks we decided
to follow. Drops out of RCU mode on such symlinks.
link_path_walk() and do_last() switched to using that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:42 +0000 (18:43 +0530)]
fs: allow AT_EMPTY_PATH in linkat(), limit that to CAP_DAC_READ_SEARCH
We don't want to allow creation of private hardlinks by different application
using the fd passed to them via SCM_RIGHTS. So limit the null relative name
usage in linkat syscall to CAP_DAC_READ_SEARCH
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Linus Torvalds [Tue, 15 Mar 2011 17:59:09 +0000 (10:59 -0700)]
Merge branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm
* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
xen: suspend: remove xen_hvm_suspend
xen: suspend: pull pre/post suspend hooks out into suspend_info
xen: suspend: move arch specific pre/post suspend hooks into generic hooks
xen: suspend: refactor non-arch specific pre/post suspend hooks
xen: suspend: add "arch" to pre/post suspend hooks
xen: suspend: pass extra hypercall argument via suspend_info struct
xen: suspend: refactor cancellation flag into a structure
xen: suspend: use HYPERVISOR_suspend for PVHVM case instead of open coding
xen: switch to new schedop hypercall by default.
xen: use new schedop interface for suspend
xen: do not respond to unknown xenstore control requests
xen: fix compile issue if XEN is enabled but XEN_PVHVM is disabled
xen: PV on HVM: support PV spinlocks and IPIs
xen: make the ballon driver work for hvm domains
xen-blkfront: handle Xen major numbers other than XENVBD
xen: do not use xen_info on HVM, set pv_info name to "Xen HVM"
xen: no need to delay xen_setup_shutdown_event for hvm guests anymore
Linus Torvalds [Tue, 15 Mar 2011 17:49:16 +0000 (10:49 -0700)]
Merge branches 'stable/ia64', 'stable/blkfront-cleanup' and 'stable/cleanup' of git://git./linux/kernel/git/konrad/xen
* 'stable/ia64' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: ia64 build broken due to "xen: switch to new schedop hypercall by default."
* 'stable/blkfront-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: Union the blkif_request request specific fields
* 'stable/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: annotate functions which only call into __init at start of day
xen p2m: annotate variable which appears unused
xen: events: mark cpu_evtchn_mask_p as __refdata
Linus Torvalds [Tue, 15 Mar 2011 17:47:56 +0000 (10:47 -0700)]
Merge branch 'stable/irq.cleanup' of git://git./linux/kernel/git/konrad/xen
* 'stable/irq.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: events: remove dom0 specific xen_create_msi_irq
xen: events: use xen_bind_pirq_msi_to_irq from xen_create_msi_irq
xen: events: push set_irq_msi down into xen_create_msi_irq
xen: events: update pirq_to_irq in xen_create_msi_irq
xen: events: refactor xen_create_msi_irq slightly
xen: events: separate MSI PIRQ allocation from PIRQ binding to IRQ
xen: events: assume PHYSDEVOP_get_free_pirq exists
xen: pci: collapse apic_register_gsi_xen_hvm and xen_hvm_register_pirq
xen: events: return irq from xen_allocate_pirq_msi
xen: events: drop XEN_ALLOC_IRQ flag to xen_allocate_pirq_msi
xen: events: do not leak IRQ from xen_allocate_pirq_msi when no pirq available.
xen: pci: only define xen_initdom_setup_msi_irqs if CONFIG_XEN_DOM0
Linus Torvalds [Tue, 15 Mar 2011 17:47:16 +0000 (10:47 -0700)]
Merge branches 'stable/irq.rework' and 'stable/pcifront-fixes' of git://git./linux/kernel/git/konrad/xen
* 'stable/irq.rework' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/irq: Cleanup up the pirq_to_irq for DomU PV PCI passthrough guests as well.
xen: Use IRQF_FORCE_RESUME
xen/timer: Missing IRQF_NO_SUSPEND in timer code broke suspend.
xen: Fix compile error introduced by "switch to new irq_chip functions"
xen: Switch to new irq_chip functions
xen: Remove stale irq_chip.end
xen: events: do not free legacy IRQs
xen: events: allocate GSIs and dynamic IRQs from separate IRQ ranges.
xen: events: add xen_allocate_irq_{dynamic, gsi} and xen_free_irq
xen:events: move find_unbound_irq inside CONFIG_PCI_MSI
xen: handled remapped IRQs when enabling a pcifront PCI device.
genirq: Add IRQF_FORCE_RESUME
* 'stable/pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
pci/xen: When free-ing MSI-X/MSI irq->desc also use generic code.
pci/xen: Cleanup: convert int** to int[]
pci/xen: Use xen_allocate_pirq_msi instead of xen_allocate_pirq
xen-pcifront: Sanity check the MSI/MSI-X values
xen-pcifront: don't use flush_scheduled_work()
Linus Torvalds [Tue, 15 Mar 2011 17:32:15 +0000 (10:32 -0700)]
Merge branches 'stable/p2m-identity.v4.9.1' and 'stable/e820' of git://git./linux/kernel/git/konrad/xen
* 'stable/p2m-identity.v4.9.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/m2p: Check whether the MFN has IDENTITY_FRAME bit set..
xen/m2p: No need to catch exceptions when we know that there is no RAM
xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set.
xen/debugfs: Add 'p2m' file for printing out the P2M layout.
xen/setup: Set identity mapping for non-RAM E820 and E820 gaps.
xen/mmu: WARN_ON when racing to swap middle leaf.
xen/mmu: Set _PAGE_IOMAP if PFN is an identity PFN.
xen/mmu: Add the notion of identity (1-1) mapping.
xen: Mark all initial reserved pages for the balloon as INVALID_P2M_ENTRY.
* 'stable/e820' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/e820: Don't mark balloon memory as E820_UNUSABLE when running as guest and fix overflow.
xen/setup: Inhibit resource API from using System RAM E820 gaps as PCI mem gaps.
Al Viro [Sun, 13 Mar 2011 21:08:22 +0000 (17:08 -0400)]
Allow passing O_PATH descriptors via SCM_RIGHTS datagrams
Just need to make sure that AF_UNIX garbage collector won't
confuse O_PATHed socket on filesystem for real AF_UNIX opened
socket.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 13 Mar 2011 19:56:26 +0000 (15:56 -0400)]
readlinkat(), fchownat() and fstatat() with empty relative pathnames
For readlinkat() we simply allow empty pathname; it will fail unless
we have dfd equal to O_PATH-opened symlink, so we are outside of
POSIX scope here. For fchownat() and fstatat() we allow AT_EMPTY_PATH;
let the caller explicitly ask for such behaviour.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 13 Mar 2011 20:42:14 +0000 (16:42 -0400)]
Allow O_PATH for symlinks
At that point we can't do almost nothing with them. They can be opened
with O_PATH, we can manipulate such descriptors with dup(), etc. and
we can see them in /proc/*/{fd,fdinfo}/*.
We can't (and won't be able to) follow /proc/*/fd/* symlinks for those;
there's simply not enough information for pathname resolution to go on
from such point - to resolve a symlink we need to know which directory
does it live in.
We will be able to do useful things with them after the next commit, though -
readlinkat() and fchownat() will be possible to use with dfd being an
O_PATH-opened symlink and empty relative pathname. Combined with
open_by_handle() it'll give us a way to do realink-by-handle and
lchown-by-handle without messing with more redundant syscalls.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 13 Mar 2011 07:51:11 +0000 (03:51 -0400)]
New kind of open files - "location only".
New flag for open(2) - O_PATH. Semantics:
* pathname is resolved, but the file itself is _NOT_ opened
as far as filesystem is concerned.
* almost all operations on the resulting descriptors shall
fail with -EBADF. Exceptions are:
1) operations on descriptors themselves (i.e.
close(), dup(), dup2(), dup3(), fcntl(fd, F_DUPFD),
fcntl(fd, F_DUPFD_CLOEXEC, ...), fcntl(fd, F_GETFD),
fcntl(fd, F_SETFD, ...))
2) fcntl(fd, F_GETFL), for a common non-destructive way to
check if descriptor is open
3) "dfd" arguments of ...at(2) syscalls, i.e. the starting
points of pathname resolution
* closing such descriptor does *NOT* affect dnotify or
posix locks.
* permissions are checked as usual along the way to file;
no permission checks are applied to the file itself. Of course,
giving such thing to syscall will result in permission checks (at
the moment it means checking that starting point of ....at() is
a directory and caller has exec permissions on it).
fget() and fget_light() return NULL on such descriptors; use of
fget_raw() and fget_raw_light() is needed to get them. That protects
existing code from dealing with those things.
There are two things still missing (they come in the next commits):
one is handling of symlinks (right now we refuse to open them that
way; see the next commit for semantics related to those) and another
is descriptor passing via SCM_RIGHTS datagrams.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:40 +0000 (18:43 +0530)]
ext4: Copy fs UUID to superblock
File system UUID is made available to application
via /proc/<pid>/mountinfo
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:39 +0000 (18:43 +0530)]
ext3: Copy fs UUID to superblock.
File system UUID is made available to application
via /proc/<pid>/mountinfo
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:38 +0000 (18:43 +0530)]
vfs: Export file system uuid via /proc/<pid>/mountinfo
We add a per superblock uuid field. File systems should
update the uuid in the fill_super callback
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:38 +0000 (18:43 +0530)]
unistd.h: Add new syscalls numbers to asm-generic
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:37 +0000 (18:43 +0530)]
x86: Add new syscalls for x86_64
This patch add new syscalls to x86_64
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:35 +0000 (18:43 +0530)]
x86: Add new syscalls for x86_32
This patch adds new syscalls to x86_32
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:30 +0000 (18:43 +0530)]
fs: Remove i_nlink check from file system link callback
Now that VFS check for inode->i_nlink == 0 and returns proper
error, remove similar check from file system
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:27 +0000 (18:43 +0530)]
fs: Don't allow to create hardlink for deleted file
Add inode->i_nlink == 0 check in VFS. Some of the file systems
do this internally. A followup patch will remove those instance.
This is needed to ensure that with link by handle we don't allow
to create hardlink of an unlinked file. The check also prevent a race
between unlink and link
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:26 +0000 (18:43 +0530)]
vfs: Add open by file handle support
[AV: duplicate of open() guts removed; file_open_root() used instead]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:26 +0000 (18:43 +0530)]
vfs: Add name to file handle conversion support
The syscall also return mount id which can be used
to lookup file system specific information such as uuid
in /proc/<pid>/mountinfo
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Tue, 15 Mar 2011 01:20:32 +0000 (18:20 -0700)]
Linux 2.6.38
Al Viro [Mon, 14 Mar 2011 22:56:51 +0000 (18:56 -0400)]
New AT_... flag: AT_EMPTY_PATH
For name_to_handle_at(2) we'll want both ...at()-style syscall that
would be usable for non-directory descriptors (with empty relative
pathname). Introduce new flag (AT_EMPTY_PATH) to deal with that and
corresponding LOOKUP_EMPTY; teach user_path_at() and path_init() to
deal with the latter.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Mon, 14 Mar 2011 22:20:39 +0000 (15:20 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/dhowells/linux-2.6-mn10300
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300:
MN10300: atomic_read() should ensure it emits a load
MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist
MN10300: Proper use of macros get_user() in the case of incremented pointers
Linus Torvalds [Mon, 14 Mar 2011 22:20:12 +0000 (15:20 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits)
MIPS: Alchemy: Fix reset for MTX-1 and XXS1500
MIPS: MTX-1: Make au1000_eth probe all PHY addresses
MIPS: Jz4740: Add HAVE_CLK
MIPS: Move idle task creation to work queue
MIPS, Perf-events: Use unsigned delta for right shift in event update
MIPS, Perf-events: Work with the new callchain interface
MIPS, Perf-events: Fix event check in validate_event()
MIPS, Perf-events: Work with the new PMU interface
MIPS, Perf-events: Work with irq_work
MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y
MIPS: Loongson: Fix potentially wrong string handling
MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c
MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h
MIPS: Remove unused code from arch/mips/kernel/syscall.c
MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c
MIPS: MSP: Fix MSP71xx bpci interrupt handler return value
MIPS: Select R4K timer lib for all MSP platforms
MIPS: Loongson: Remove ad-hoc cmdline default
MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...).
MIPS: Add an unreachable return statement to satisfy buggy GCCs.
...
Linus Torvalds [Mon, 14 Mar 2011 22:19:09 +0000 (15:19 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: ce4100: Set pci ops via callback instead of module init
x86/mm: Fix pgd_lock deadlock
x86/mm: Handle mm_fault_error() in kernel space
x86: Don't check for BIOS corruption in first 64K when there's no need to
Linus Torvalds [Mon, 14 Mar 2011 22:17:07 +0000 (15:17 -0700)]
Revert "oom: oom_kill_process: fix the child_points logic"
This reverts the parent commit. I hate doing that, but it's generating
some discussion ("half of it is right"), and since I am planning on
doing the 2.6.38 release later today we can punt it to stable if
required. Let's not rock the boat right now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Mon, 14 Mar 2011 19:05:30 +0000 (20:05 +0100)]
oom: oom_kill_process: fix the child_points logic
oom_kill_process() starts with victim_points == 0. This means that
(most likely) any child has more points and can be killed erroneously.
Also, "children has a different mm" doesn't match the reality, we should
check child->mm != t->mm. This check is not exactly correct if t->mm ==
NULL but this doesn't really matter, oom_kill_task() will kill them
anyway.
Note: "Kill all processes sharing p->mm" in oom_kill_task() is wrong
too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Fainelli [Mon, 21 Feb 2011 13:28:02 +0000 (14:28 +0100)]
MIPS: Alchemy: Fix reset for MTX-1 and XXS1500
Since commit
32fd6901 (MIPS: Alchemy: get rid of common/reset.c)
Alchemy-based boards use their own reset function. For MTX-1 and XXS1500,
the reset function pokes at the BCSR.SYSTEM_RESET register, but this does
not work. According to Bruno Randolf, this was not tested when written.
Previously, the generic au1000_restart() routine called the board specific
reset function, which for MTX-1 and XXS1500 did not work, but finally made
a jump to the reset vector, which really triggers a system restart. Fix
reboot for both targets by jumping to the reset vector.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2093/
Acked-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Sun, 27 Feb 2011 18:53:53 +0000 (19:53 +0100)]
MIPS: MTX-1: Make au1000_eth probe all PHY addresses
When au1000_eth probes the MII bus for PHY address, if we do not set
au1000_eth platform data's phy_search_highest_address, the MII probing
logic will exit early and will assume a valid PHY is found at address 0.
For MTX-1, the PHY is at address 31, and without this patch, the link
detection/speed/duplex would not work correctly.
CC: stable@kernel.org
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2111/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maurus Cuelenaere [Mon, 28 Feb 2011 23:20:01 +0000 (00:20 +0100)]
MIPS: Jz4740: Add HAVE_CLK
Jz4740 supports the clock framework but doesn't have HAVE_CLK defined,
so define it!
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2112/
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maksim Rayskiy [Sat, 12 Feb 2011 18:21:32 +0000 (10:21 -0800)]
MIPS: Move idle task creation to work queue
To avoid forking usermode thread when creating an idle task, move fork_idle
to a work queue.
If kernel starts with maxcpus= option which does not bring all available
cpus online at boot time, idle tasks for offline cpus are not created. If
later offline cpus are hotplugged through sysfs, __cpu_up is called in
the context of the user task, and fork_idle copies its non-zero mm
pointer. This causes BUG() in per_cpu_trap_init.
This also avoids issues with resource limits of the CPU writing to sysfs,
containers, maybe others.
Signed-off-by: Maksim Rayskiy <mrayskiy@broadcom.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2070/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:21 +0000 (16:19 +0800)]
MIPS, Perf-events: Use unsigned delta for right shift in event update
Leverage the commit for ARM by Will Deacon:
-
446a5a8b1eb91a6990e5c8fe29f14e7a95b69132
ARM: 6205/1: perf: ensure counter delta is treated as unsigned
Hardware performance counters on ARM are 32-bits wide but atomic64_t
variables are used to represent counter data in the hw_perf_event structure.
The armpmu_event_update function right-shifts a signed 64-bit delta variable
and adds the result to the event count. This can lead to shifting in sign-bits
if the MSB of the 32-bit counter value is set. This results in perf output
such as:
Performance counter stats for 'sleep 20':
18446744073460670464 cycles <-- 0xFFFFFFFFF12A6000
7783773 instructions # 0.000 IPC
465 context-switches
161 page-faults
1172393 branches
20.
154242147 seconds time elapsed
This patch ensures that the delta value is treated as unsigned so that the
right shift sets the upper bits to zero.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Patchwork: http://patchwork.linux-mips.org/patch/2015/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:20 +0000 (16:19 +0800)]
MIPS, Perf-events: Work with the new callchain interface
This is the MIPS part of the following commits by Frederic Weisbecker:
-
f72c1a931e311bb7780fee19e41a89ac42cab50e
perf: Factorize callchain context handling
Store the kernel and user contexts from the generic layer instead
of archs, this gathers some repetitive code.
-
56962b4449af34070bb1994621ef4f0265eed4d8
perf: Generalize some arch callchain code
- Most archs use one callchain buffer per cpu, except x86 that needs
to deal with NMIs. Provide a default perf_callchain_buffer()
implementation that x86 overrides.
- Centralize all the kernel/user regs handling and invoke new arch
handlers from there: perf_callchain_user() / perf_callchain_kernel()
That avoid all the user_mode(), current->mm checks and so...
- Invert some parameters in perf_callchain_*() helpers: entry to the
left, regs to the right, following the traditional (dst, src).
-
70791ce9ba68a5921c9905ef05d23f62a90bc10c
perf: Generalize callchain_store()
callchain_store() is the same on every archs, inline it in
perf_event.h and rename it to perf_callchain_store() to avoid
any collision.
This removes repetitive code.
-
c1a65932fd7216fdc9a0db8bbffe1d47842f862c
perf: Drop unappropriate tests on arch callchains
Drop the TASK_RUNNING test on user tasks for callchains as
this check doesn't seem to make any sense.
Also remove the tests for !current that is not supposed to
happen and current->pid as this should be handled at the
generic level, with exclude_idle attribute.
Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: dengcheng.zhu@gmail.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Patchwork: http://patchwork.linux-mips.org/patch/2014/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:19 +0000 (16:19 +0800)]
MIPS, Perf-events: Fix event check in validate_event()
Ignore events that are in off/error state or belong to a different PMU.
This patch originates from the following commit for ARM by Will Deacon:
-
65b4711ff513767341aa1915c822de6ec0de65cb
ARM: 6352/1: perf: fix event validation
The validate_event function in the ARM perf events backend has the
following problems:
1.) Events that are disabled count towards the cost.
2.) Events associated with other PMUs [for example, software events or
breakpoints] do not count towards the cost, but do fail validation,
causing the group to fail.
This patch changes validate_event so that it ignores events in the
PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: dengcheng.zhu@gmail.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Cc: ddaney@caviumnetworks.com
Patchwork: http://patchwork.linux-mips.org/patch/2013/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:18 +0000 (16:19 +0800)]
MIPS, Perf-events: Work with the new PMU interface
This is the MIPS part of the following commits by Peter Zijlstra:
-
a4eaf7f14675cb512d69f0c928055e73d0c6d252
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
For MIPSXX, the stopped state is implemented in the way of 1.b as above.
-
33696fc0d141bbbcb12f75b69608ea83282e3117
perf: Per PMU disable
Changes perf_disable() into perf_pmu_disable().
-
24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7
perf: Reduce perf_disable() usage
Since the current perf_disable() usage is only an optimization,
remove it for now. This eases the removal of the __weak
hw_perf_enable() interface.
-
b0a873ebbf87bf38bf70b5e39a7cadc96099fa13
perf: Register PMU implementations
Simple registration interface for struct pmu, this provides the
infrastructure for removing all the weak functions.
-
51b0fe39549a04858001922919ab355dee9bdfcf
perf: Deconstify struct pmu
sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"`
Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: dengcheng.zhu@gmail.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Cc: ddaney@caviumnetworks.com
Patchwork: http://patchwork.linux-mips.org/patch/2012/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:17 +0000 (16:19 +0800)]
MIPS, Perf-events: Work with irq_work
This is the MIPS part of the following commit by Peter Zijlstra:
-
e360adbe29241a0194e10e20595360dd7b98a2b3
irq_work: Add generic hardirq context callbacks
Provide a mechanism that allows running code in IRQ context. It is
most useful for NMI code that needs to interact with the rest of the
system -- like wakeup a task to drain buffers.
Perf currently has such a mechanism, so extract that and provide it as
a generic feature, independent of perf so that others may also
benefit.
The IRQ context callback is generated through self-IPIs where
possible, or on architectures like powerpc the decrementer (the
built-in timer facility) is set to generate an interrupt immediately.
Architectures that don't have anything like this get to do with a
callback from the timer tick. These architectures can call
irq_work_run() at the tail of any IRQ handlers that might enqueue such
work (like the perf IRQ handler) to avoid undue latencies in
processing the work.
For MIPSXX, we need to call irq_work_run() at the tail of the perf IRQ
handler as described above.
Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com,
Patchwork: http://patchwork.linux-mips.org/patch/2011/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Mon, 7 Feb 2011 02:31:36 +0000 (11:31 +0900)]
MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2055/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Stefan Weil [Sun, 30 Jan 2011 20:41:44 +0000 (21:41 +0100)]
MIPS: Loongson: Fix potentially wrong string handling
This error was reported by cppcheck:
arch/mips/loongson/common/machtype.c:56: error: Dangerous usage of 'str' (strncpy doesn't always 0-terminate it)
If strncpy copied MACHTYPE_LEN bytes, the destination string str
was not terminated.
The patch adds one more byte to str and makes sure that this byte is
always 0.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2053/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Mon, 24 Jan 2011 22:51:37 +0000 (14:51 -0800)]
MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c
Under some combinations of CONFIG_*, lastpfn in page_is_ram is 'set
but not used'. Mark it as __maybe_unused to quiet the warning/error.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2033/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Mon, 24 Jan 2011 22:51:36 +0000 (14:51 -0800)]
MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h
GCC-4.6 can find more unused code than previous versions could.
In the case of arch/mips/math-emu/ieee754int.h, the COMPXSP and
COMPXDP macros are used in several places, but a couple of them leave
xs unused. The easiest thing to do is mark it as __maybe_unused to
quiet the warning.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2032/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Mon, 24 Jan 2011 22:51:35 +0000 (14:51 -0800)]
MIPS: Remove unused code from arch/mips/kernel/syscall.c
The variable arg3 in _sys_sysmips() is unused. Remove it.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2034/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Mon, 24 Jan 2011 22:51:34 +0000 (14:51 -0800)]
MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c
GCC-4.6 can find more unused code than previous versions could.
In the case of protected_restore_fp_context{,32}, the variable tmp is
really used. Its use is tricky in that we really care about the side
effects of the __put_user() calls. So we must mark tmp with
__maybe_unused to quiet the warning.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2035/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Anoop P A [Thu, 18 Nov 2010 10:32:50 +0000 (16:02 +0530)]
MIPS: MSP: Fix MSP71xx bpci interrupt handler return value
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: Ben Hutchings <ben@decadent.org.uk>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1804/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Anoop P A [Thu, 18 Nov 2010 08:12:28 +0000 (13:42 +0530)]
MIPS: Select R4K timer lib for all MSP platforms
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1803/
Tested-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Robert Millan [Sun, 7 Nov 2010 12:38:29 +0000 (13:38 +0100)]
MIPS: Loongson: Remove ad-hoc cmdline default
Loongson builds have an ad-hoc cmdline default of "console=ttyS0,115200
root=/dev/hda1". These settings come from a vendor; I remember builds
from Lemote branch requiring a "console=tty" override in order to get a
working console.
At least on Yeeloong, they're particularly useless: there's no external
serial port, and the IDE drive is now recognised as /dev/sda.
Signed-off-by: Robert Millan <rmh@gnu.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1759/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Stefan Oberhumer [Mon, 17 Jan 2011 08:19:53 +0000 (09:19 +0100)]
MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...).
The sysmips(MIPS_FIXADE, ...) case contains an obvious copy-and-paste
error in the handling of the TIF_LOGADE flag. Fix that
Patchwork: https://patchwork.linux-mips.org/patch/1997/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Wed, 19 Jan 2011 23:24:42 +0000 (15:24 -0800)]
MIPS: Add an unreachable return statement to satisfy buggy GCCs.
It was reported that GCC-4.3.3 (with CodeSourcery extensions) fails
without this.
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2010/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Wu Zhangjin [Fri, 21 Jan 2011 18:01:53 +0000 (02:01 +0800)]
MIPS, Tracing: Fix set_graph_function of function graph tracer
trace.func should be set to the recorded ip of the mcount calling site
in the __mcount_loc section to filter the function entries configured
through the tracing/set_graph_function interface, but before, this is
set to the self_ra(the return address of mcount), which has made
set_graph_function not work as expected.
This fixes it via calculating the right recorded ip in the __mcount_loc
section and assign it to trace.func.
Reported-by: Zhiping Zhong <xzhong86@163.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2017/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Wu Zhangjin [Wed, 19 Jan 2011 19:28:31 +0000 (03:28 +0800)]
MIPS, Tracing: Clean up ftrace_make_nop()
This moves the comments out of ftrace_make_nop() and cleans it. At the
same time, a macro MCOUNT_OFFSET_INSNS is defined for sharing with the
next patch.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2008/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Wu Zhangjin [Wed, 19 Jan 2011 19:28:30 +0000 (03:28 +0800)]
MIPS, Tracing: Clean up prepare_ftrace_return()
The old prepare_ftrace_return() for MIPS is confused and have introduced
some problem. This patch cleans up the names of the arguments, variables
and related functions.
For MIPS, the 2nd argument of prepare_ftrace_return() is not really the
'selfpc' described in ftrace-design.txt but instead it is the self
return address. This did break the compatibility of the generic
interface but really reduced one unneeded calculation for to get the
current function name, the parent return address and the self return
address are enough, no need to tranform the self return address to the
self address.
But set_graph_function of function graph tracer is an exception, it does
need the 2nd argument of prepare_ftrace_return() as 'selfpc', for it
will use 'selfpc' to match user's configuration of function graph
entries, but in reality, it doesn't need the 'selfpc' but the recorded
ip address of the mcount calling site in the __mcount_loc section. So,
the 2nd argument of prepare_ftrace_return() is not important, the real
requirement is the right recorded ip address should be calculated and
assign to trace.func, this will be fixed in the next patches.
Reported-by: Zhiping Zhong <xzhong86@163.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2007/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Wu Zhangjin [Wed, 19 Jan 2011 19:28:29 +0000 (03:28 +0800)]
MIPS, Tracing: Substitute in_kernel_space() for in_module()
The old in_module() may not work in some situations(e.g. when module &
kernel are in the same address space when CONFIG_MAPPED_KERNEL=y), The
in_kernel_space() is more generic and it is also easy to be implemented
via cloning the existing core_kernel_text(), so, replace the in_module()
with in_kernel_space().
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2005/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Wu Zhangjin [Wed, 19 Jan 2011 19:28:27 +0000 (03:28 +0800)]
MIPS, Tracing: Speed up function graph tracer
This simply moves the "ip-=4" statement down to the end of the do { ...
} while (...); loop, which reduces one unneeded subtration and the
subsequent memory loading and comparison.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2006/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Thomas Gleixner [Sun, 23 Jan 2011 15:17:00 +0000 (15:17 +0000)]
MIPS: Replace deprecated spinlock initialization
SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2025/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
Linus Torvalds [Mon, 14 Mar 2011 18:19:50 +0000 (11:19 -0700)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: NFSROOT should default to "proto=udp"
nfs4: remove duplicated #include
NFSv4: nfs4_state_mark_reclaim_nograce() should be static
NFSv4: Fix the setlk error handler
NFSv4.1: Fix the handling of the SEQUENCE status bits
NFSv4/4.1: Fix nfs4_schedule_state_recovery abuses
NFSv4.1 reclaim complete must wait for completion
NFSv4: remove duplicate clientid in struct nfs_client
NFSv4.1: Retry CREATE_SESSION on NFS4ERR_DELAY
sunrpc: Propagate errors from xs_bind() through xs_create_sock()
(try3-resend) Fix nfs_compat_user_ino64 so it doesn't cause problems if bit 31 or 63 are set in fileid
nfs: fix compilation warning
nfs: add kmalloc return value check in decode_and_add_ds
SUNRPC: Remove resource leak in svc_rdma_send_error()
nfs: close NFSv4 COMMIT vs. CLOSE race
SUNRPC: Close a race in __rpc_wait_for_completion_task()
Linus Torvalds [Mon, 14 Mar 2011 18:17:43 +0000 (11:17 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon: fix problem with changing active VRAM size. (v2)
Linus Torvalds [Mon, 14 Mar 2011 17:15:43 +0000 (10:15 -0700)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
watchdog: hpwdt: eliminate section mismatch warning
watchdog: w83697ug_wdt: Fix set bit 0 to activate GPIO2
watchdog: sch311x_wdt: fix printk condition
watchdog: sch311x_wdt: Fix LDN active check
watchdog: cpwd: Fix buffer-overflow
Timo Warns [Mon, 14 Mar 2011 13:59:33 +0000 (14:59 +0100)]
Fix corrupted OSF partition table parsing
The kernel automatically evaluates partition tables of storage devices.
The code for evaluating OSF partitions contains a bug that leaks data
from kernel heap memory to userspace for certain corrupted OSF
partitions.
In more detail:
for (i = 0 ; i < le16_to_cpu(label->d_npartitions); i++, partition++) {
iterates from 0 to d_npartitions - 1, where d_npartitions is read from
the partition table without validation and partition is a pointer to an
array of at most 8 d_partitions.
Add the proper and obvious validation.
Signed-off-by: Timo Warns <warns@pre-sense.de>
Cc: stable@kernel.org
[ Changed the patch trivially to not repeat the whole le16_to_cpu()
thing, and to use an explicit constant for the magic value '8' ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Mon, 14 Mar 2011 08:08:47 +0000 (01:08 -0700)]
thp+memcg-numa: fix BUG at include/linux/mm.h:370!
THP's collapse_huge_page() has an understandable but ugly difference
in when its huge page is allocated: inside if NUMA but outside if not.
It's hardly surprising that the memcg failure path forgot that, freeing
the page in the non-NUMA case, then hitting a VM_BUG_ON in get_page()
(or even worse, using the freed page).
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stefano Stabellini [Wed, 2 Feb 2011 18:32:59 +0000 (18:32 +0000)]
xen/m2p: Check whether the MFN has IDENTITY_FRAME bit set..
If there is no proper PFN value in the M2P for the MFN
(so we get 0xFFFFF.. or 0x55555, or 0x0), we should
consult the M2P override to see if there is an entry for this.
[Note: we also consult the M2P override if the MFN
is past our machine_to_phys size].
We consult the P2M with the PFN. In case the returned
MFN is one of the special values: 0xFFF.., 0x5555
(which signify that the MFN can be either "missing" or it
belongs to DOMID_IO) or the p2m(m2p(mfn)) != mfn, we check
the M2P override. If we fail the M2P override check, we reset
the PFN value to INVALID_P2M_ENTRY.
Next we try to find the MFN in the P2M using the MFN
value (not the PFN value) and if found, we know
that this MFN is an identity value and return it as so.
Otherwise we have exhausted all the posibilities and we
return the PFN, which at this stage can either be a real
PFN value found in the machine_to_phys.. array, or
INVALID_P2M_ENTRY value.
[v1: Added Review-by tag]
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Fri, 14 Jan 2011 22:55:44 +0000 (17:55 -0500)]
xen/m2p: No need to catch exceptions when we know that there is no RAM
.. beyound what we think is the end of memory. However there might
be more System RAM - but assigned to a guest. Hence jump to the
M2P override check and consult.
[v1: Added Review-by tag]
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Thu, 23 Dec 2010 21:25:29 +0000 (16:25 -0500)]
xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set.
Only enabled if XEN_DEBUG is enabled. We print a warning
when:
pfn_to_mfn(pfn) == pfn, but no VM_IO (_PAGE_IOMAP) flag set
(and pfn is an identity mapped pfn)
pfn_to_mfn(pfn) != pfn, and VM_IO flag is set.
(ditto, pfn is an identity mapped pfn)
[v2: Make it dependent on CONFIG_XEN_DEBUG instead of ..DEBUG_FS]
[v3: Fix compiler warning]
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Wed, 22 Dec 2010 13:57:30 +0000 (08:57 -0500)]
xen/debugfs: Add 'p2m' file for printing out the P2M layout.
We walk over the whole P2M tree and construct a simplified view of
which PFN regions belong to what level and what type they are.
Only enabled if CONFIG_XEN_DEBUG_FS is set.
[v2: UNKN->UNKNOWN, use uninitialized_var]
[v3: Rebased on top of mmu->p2m code split]
[v4: Fixed the else if]
Reviewed-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Tue, 1 Feb 2011 22:15:30 +0000 (17:15 -0500)]
xen/setup: Set identity mapping for non-RAM E820 and E820 gaps.
We walk the E820 region and start at 0 (for PV guests we start
at ISA_END_ADDRESS) and skip any E820 RAM regions. For all other
regions and as well the gaps we set them to be identity mappings.
The reasons we do not want to set the identity mapping from 0->
ISA_END_ADDRESS when running as PV is b/c that the kernel would
try to read DMI information and fail (no permissions to read that).
There is a lot of gnarly code to deal with that weird region so
we won't try to do a cleanup in this patch.
This code ends up calling 'set_phys_to_identity' with the start
and end PFN of the the E820 that are non-RAM or have gaps.
On 99% of machines that means one big region right underneath the
4GB mark. Usually starts at 0xc0000 (or 0x80000) and goes to
0x100000.
[v2: Fix for E820 crossing 1MB region and clamp the start]
[v3: Squshed in code that does this over ranges]
[v4: Moved the comment to the correct spot]
[v5: Use the "raw" E820 from the hypervisor]
[v6: Added Review-by tag]
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Wed, 19 Jan 2011 01:17:10 +0000 (20:17 -0500)]
xen/mmu: WARN_ON when racing to swap middle leaf.
The initial bootup code uses set_phys_to_machine quite a lot, and after
bootup it would be used by the balloon driver. The balloon driver does have
mutex lock so this should not be necessary - but just in case, add
a WARN_ON if we do hit this scenario. If we do fail this, it is OK
to continue as there is a backup mechanism (VM_IO) that can bypass
the P2M and still set the _PAGE_IOMAP flags.
[v2: Change from WARN to BUG_ON]
[v3: Rebased on top of xen->p2m code split]
[v4: Change from BUG_ON to WARN]
Reviewed-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Wed, 5 Jan 2011 20:46:31 +0000 (15:46 -0500)]
xen/mmu: Set _PAGE_IOMAP if PFN is an identity PFN.
If we find that the PFN is within the P2M as an identity
PFN make sure to tack on the _PAGE_IOMAP flag.
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Wed, 19 Jan 2011 01:15:21 +0000 (20:15 -0500)]
xen/mmu: Add the notion of identity (1-1) mapping.
Our P2M tree structure is a three-level. On the leaf nodes
we set the Machine Frame Number (MFN) of the PFN. What this means
is that when one does: pfn_to_mfn(pfn), which is used when creating
PTE entries, you get the real MFN of the hardware. When Xen sets
up a guest it initially populates a array which has descending
(or ascending) MFN values, as so:
idx: 0, 1, 2
[0x290F, 0x290E, 0x290D, ..]
so pfn_to_mfn(2)==0x290D. If you start, restart many guests that list
starts looking quite random.
We graft this structure on our P2M tree structure and stick in
those MFN in the leafs. But for all other leaf entries, or for the top
root, or middle one, for which there is a void entry, we assume it is
"missing". So
pfn_to_mfn(0xc0000)=INVALID_P2M_ENTRY.
We add the possibility of setting 1-1 mappings on certain regions, so
that:
pfn_to_mfn(0xc0000)=0xc0000
The benefit of this is, that we can assume for non-RAM regions (think
PCI BARs, or ACPI spaces), we can create mappings easily b/c we
get the PFN value to match the MFN.
For this to work efficiently we introduce one new page p2m_identity and
allocate (via reserved_brk) any other pages we need to cover the sides
(1GB or 4MB boundary violations). All entries in p2m_identity are set to
INVALID_P2M_ENTRY type (Xen toolstack only recognizes that and MFNs,
no other fancy value).
On lookup we spot that the entry points to p2m_identity and return the identity
value instead of dereferencing and returning INVALID_P2M_ENTRY. If the entry
points to an allocated page, we just proceed as before and return the PFN.
If the PFN has IDENTITY_FRAME_BIT set we unmask that in appropriate functions
(pfn_to_mfn).
The reason for having the IDENTITY_FRAME_BIT instead of just returning the
PFN is that we could find ourselves where pfn_to_mfn(pfn)==pfn for a
non-identity pfn. To protect ourselves against we elect to set (and get) the
IDENTITY_FRAME_BIT on all identity mapped PFNs.
This simplistic diagram is used to explain the more subtle piece of code.
There is also a digram of the P2M at the end that can help.
Imagine your E820 looking as so:
1GB 2GB
/-------------------+---------\/----\ /----------\ /---+-----\
| System RAM | Sys RAM ||ACPI| | reserved | | Sys RAM |
\-------------------+---------/\----/ \----------/ \---+-----/
^- 1029MB ^- 2001MB
[1029MB = 263424 (0x40500), 2001MB = 512256 (0x7D100), 2048MB = 524288 (0x80000)]
And dom0_mem=max:3GB,1GB is passed in to the guest, meaning memory past 1GB
is actually not present (would have to kick the balloon driver to put it in).
When we are told to set the PFNs for identity mapping (see patch: "xen/setup:
Set identity mapping for non-RAM E820 and E820 gaps.") we pass in the start
of the PFN and the end PFN (263424 and 512256 respectively). The first step is
to reserve_brk a top leaf page if the p2m[1] is missing. The top leaf page
covers 512^2 of page estate (1GB) and in case the start or end PFN is not
aligned on 512^2*PAGE_SIZE (1GB) we loop on aligned 1GB PFNs from start pfn to
end pfn. We reserve_brk top leaf pages if they are missing (means they point
to p2m_mid_missing).
With the E820 example above, 263424 is not 1GB aligned so we allocate a
reserve_brk page which will cover the PFNs estate from 0x40000 to 0x80000.
Each entry in the allocate page is "missing" (points to p2m_missing).
Next stage is to determine if we need to do a more granular boundary check
on the 4MB (or 2MB depending on architecture) off the start and end pfn's.
We check if the start pfn and end pfn violate that boundary check, and if
so reserve_brk a middle (p2m[x][y]) leaf page. This way we have a much finer
granularity of setting which PFNs are missing and which ones are identity.
In our example 263424 and 512256 both fail the check so we reserve_brk two
pages. Populate them with INVALID_P2M_ENTRY (so they both have "missing" values)
and assign them to p2m[1][2] and p2m[1][488] respectively.
At this point we would at minimum reserve_brk one page, but could be up to
three. Each call to set_phys_range_identity has at maximum a three page
cost. If we were to query the P2M at this stage, all those entries from
start PFN through end PFN (so 1029MB -> 2001MB) would return INVALID_P2M_ENTRY
("missing").
The next step is to walk from the start pfn to the end pfn setting
the IDENTITY_FRAME_BIT on each PFN. This is done in 'set_phys_range_identity'.
If we find that the middle leaf is pointing to p2m_missing we can swap it over
to p2m_identity - this way covering 4MB (or 2MB) PFN space. At this point we
do not need to worry about boundary aligment (so no need to reserve_brk a middle
page, figure out which PFNs are "missing" and which ones are identity), as that
has been done earlier. If we find that the middle leaf is not occupied by
p2m_identity or p2m_missing, we dereference that page (which covers
512 PFNs) and set the appropriate PFN with IDENTITY_FRAME_BIT. In our example
263424 and 512256 end up there, and we set from p2m[1][2][256->511] and
p2m[1][488][0->256] with IDENTITY_FRAME_BIT set.
All other regions that are void (or not filled) either point to p2m_missing
(considered missing) or have the default value of INVALID_P2M_ENTRY (also
considered missing). In our case, p2m[1][2][0->255] and p2m[1][488][257->511]
contain the INVALID_P2M_ENTRY value and are considered "missing."
This is what the p2m ends up looking (for the E820 above) with this
fabulous drawing:
p2m /--------------\
/-----\ | &mfn_list[0],| /-----------------\
| 0 |------>| &mfn_list[1],| /---------------\ | ~0, ~0, .. |
|-----| | ..., ~0, ~0 | | ~0, ~0, [x]---+----->| IDENTITY [@256] |
| 1 |---\ \--------------/ | [p2m_identity]+\ | IDENTITY [@257] |
|-----| \ | [p2m_identity]+\\ | .... |
| 2 |--\ \-------------------->| ... | \\ \----------------/
|-----| \ \---------------/ \\
| 3 |\ \ \\ p2m_identity
|-----| \ \-------------------->/---------------\ /-----------------\
| .. +->+ | [p2m_identity]+-->| ~0, ~0, ~0, ... |
\-----/ / | [p2m_identity]+-->| ..., ~0 |
/ /---------------\ | .... | \-----------------/
/ | IDENTITY[@0] | /-+-[x], ~0, ~0.. |
/ | IDENTITY[@256]|<----/ \---------------/
/ | ~0, ~0, .... |
| \---------------/
|
p2m_missing p2m_missing
/------------------\ /------------\
| [p2m_mid_missing]+---->| ~0, ~0, ~0 |
| [p2m_mid_missing]+---->| ..., ~0 |
\------------------/ \------------/
where ~0 is INVALID_P2M_ENTRY. IDENTITY is (PFN | IDENTITY_BIT)
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
[v5: Changed code to use ranges, added ASCII art]
[v6: Rebased on top of xen->p2m code split]
[v4: Squished patches in just this one]
[v7: Added RESERVE_BRK for potentially allocated pages]
[v8: Fixed alignment problem]
[v9: Changed 1<<3X to 1<<BITS_PER_LONG-X]
[v10: Copied git commit description in the p2m code + Add Review tag]
[v11: Title had '2-1' - should be '1-1' mapping]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
David Howells [Mon, 14 Mar 2011 14:49:44 +0000 (14:49 +0000)]
MN10300: atomic_read() should ensure it emits a load
atomic_read() needs to ensure that it emits a load (which it can do by using
ACCESS_ONCE()).
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Mon, 14 Mar 2011 14:45:29 +0000 (14:45 +0000)]
MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist
The invalidate-only versions of flush_icache_*range() are trying sending the
SMP_ICACHE_INV_FLUSH_RANGE IPI command in SMP kernels when they should be
sending SMP_ICACHE_INV_RANGE as the former does not exist.
Signed-off-by: David Howells <dhowells@redhat.com>
Tkhai Kirill [Mon, 14 Mar 2011 13:27:46 +0000 (13:27 +0000)]
MN10300: Proper use of macros get_user() in the case of incremented pointers
Using __get_user_check(x, ptr++, size) leads to double increment of pointer.
This macro uses the macro get_user directly, which itself is used in this way
(get_user(x, ptr++)) in some functions of the kernel. The patch fixes the
error.
Reported-by: Tkhai Kirill <tkhai@yandex.ru>
Signed-off-by: David Howells <dhowells@redhat.com>
Sebastian Andrzej Siewior [Mon, 14 Mar 2011 09:33:40 +0000 (10:33 +0100)]
x86: ce4100: Set pci ops via callback instead of module init
Setting the pci ops on subsys initcall unconditionally will break
multi platform kernels on anything except ce4100.
Use x86_init.pci.init ops to call this only on real ce4100 platforms.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: sodaville@linutronix.de
LKML-Reference: <
20110314093340.GA21026@www.tglx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Aneesh Kumar K.V [Sat, 29 Jan 2011 13:13:25 +0000 (18:43 +0530)]
exportfs: Return the minimum required handle size
The exportfs encode handle function should return the minimum required
handle size. This helps user to find out the handle size by passing 0
handle size in the first step and then redoing to the call again with
the returned handle size value.
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sat, 12 Mar 2011 15:41:39 +0000 (10:41 -0500)]
clean statfs-like syscalls up
New helpers: user_statfs() and fd_statfs(), taking userland pathname and
descriptor resp. and filling struct kstatfs. Syscalls of statfs family
(native, compat and foreign - osf and hpux on alpha and parisc resp.)
switched to those. Removes some boilerplate code, simplifies cleanup
on errors...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 11 Mar 2011 17:08:24 +0000 (12:08 -0500)]
open-style analog of vfs_path_lookup()
new function: file_open_root(dentry, mnt, name, flags) opens the file
vfs_path_lookup would arrive to.
Note that name can be empty; in that case the usual requirement that
dentry should be a directory is lifted.
open-coded equivalents switched to it, may_open() got down exactly
one caller and became static.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Thu, 10 Mar 2011 04:04:47 +0000 (23:04 -0500)]
reduce vfs_path_lookup() to do_path_lookup()
New lookup flag: LOOKUP_ROOT. nd->root is set (and held) by caller,
path_init() starts walking from that place and all pathname resolution
machinery never drops nd->root if that flag is set. That turns
vfs_path_lookup() into a special case of do_path_lookup() *and*
gets us down to 3 callers of link_path_walk(), making it finally
feasible to rip the handling of trailing symlink out of link_path_walk().
That will not only simply the living hell out of it, but make life
much simpler for unionfs merge. Trailing symlink handling will
become iterative, which is a good thing for stack footprint in
a lot of situations as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 11 Mar 2011 09:44:53 +0000 (04:44 -0500)]
untangle do_lookup()
That thing has devolved into rats nest of gotos; sane use of unlikely()
gets rid of that horror and gives much more readable structure:
* make a fast attempt to find a dentry; false negatives are OK.
In RCU mode if everything went fine, we are done, otherwise just drop
out of RCU. If we'd done (RCU) ->d_revalidate() and it had not refused
outright (i.e. didn't give us -ECHILD), remember its result.
* now we are not in RCU mode and hopefully have a dentry. If we
do not, lock parent, do full d_lookup() and if that has not found anything,
allocate and call ->lookup(). If we'd done that ->lookup(), remember that
dentry is good and we don't need to revalidate it.
* now we have a dentry. If it has ->d_revalidate() and we can't
skip it, call it.
* hopefully dentry is good; if not, either fail (in case of error)
or try to invalidate it. If d_invalidate() has succeeded, drop it and
retry everything as if original attempt had not found a dentry.
* now we can finish it up - deal with mountpoint crossing and
automount.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 9 Mar 2011 21:22:18 +0000 (16:22 -0500)]
path_openat: clean ELOOP handling a bit
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 9 Mar 2011 06:34:45 +0000 (01:34 -0500)]
do_last: kill a rudiment of old ->d_revalidate() workaround
There used to be time when ->d_revalidate() couldn't return an error.
So intents code had lookup_instantiate_filp() stash ERR_PTR(error)
in nd->intent.open.filp and had it checked after lookup_hash(), to
catch the otherwise silent failures. That had been introduced by
commit
4af4c52f34606bdaab6930a845550c6fb02078a4. These days
->d_revalidate() can and does propagate errors back to callers
explicitly, so this check isn't needed anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 9 Mar 2011 05:59:59 +0000 (00:59 -0500)]
fold __open_namei_create() and open_will_truncate() into do_last()
... and clean up a bit more
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 9 Mar 2011 05:36:45 +0000 (00:36 -0500)]
do_last: unify may_open() call and everyting after it
We have a bunch of diverging codepaths in do_last(); some of
them converge, but the case of having to create a new file
duplicates large part of common tail of the rest and exits
separately. Massage them so that they could be merged.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 9 Mar 2011 05:17:27 +0000 (00:17 -0500)]
move may_open() from __open_name_create() to do_last()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 9 Mar 2011 05:13:14 +0000 (00:13 -0500)]
expand finish_open() in its only caller
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Tue, 8 Mar 2011 19:17:44 +0000 (14:17 -0500)]
sanitize pathname component hash calculation
Lift it to lookup_one_len() and link_path_walk() resp. into the
same place where we calculated default hash function of the same
name.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Tue, 8 Mar 2011 04:49:20 +0000 (23:49 -0500)]
kill __lookup_one_len()
only one caller left
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 6 Mar 2011 03:58:25 +0000 (22:58 -0500)]
switch non-create side of open() to use of do_last()
Instead of path_lookupat() doing trailing symlink resolution,
use the same scheme as on the O_CREAT side. Walk with
LOOKUP_PARENT, then (in do_last()) look the final component
up, then either open it or return error or, if it's a symlink,
give the symlink back to path_openat() to be resolved there.
The really messy complication here is RCU. We don't want to drop
out of RCU mode before the final lookup, since we don't want to
bounce parent directory ->d_count without a good reason.
Result is _not_ pretty; later in the series we'll clean it up.
For now we are roughly back where we'd been before the revert
done by Nick's series - top-level logics of path_openat() is
cleaned up, do_last() does actual opening, symlink resolution is
done uniformly.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 6 Mar 2011 02:12:22 +0000 (21:12 -0500)]
get rid of nd->file
Don't stash the struct file * used as starting point of walk in nameidata;
pass file ** to path_init() instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 4 Mar 2011 19:44:37 +0000 (14:44 -0500)]
get rid of the last LOOKUP_RCU dependencies in link_path_walk()
New helper: terminate_walk(). An error has happened during pathname
resolution and we either drop nd->path or terminate RCU, depending
the mode we had been in. After that, nd is essentially empty.
Switch link_path_walk() to using that for cleanup.
Now the top-level logics in link_path_walk() is back to sanity. RCU
dependencies are in the lower-level functions.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>