git.osdn.net Git - tomoyo/tomoyo-test1.git/log

Merge branch 'hns3-fixes'

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver

There are some bugfix for the HNS3 ethernet driver
====================

Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix wrong bw weight of disabled tc issue

In dwrr mode, the default bandwidth weight of disabled tc is set to 0.
If the bandwidth weight is 0, the mode will change to sp.
Therefore, disabled tc default bandwidth weight need changed to 1,
and 0 is returned when query the bandwidth weight of disabled tc.
In addition, driver need stop configure bandwidth weight if tc is disabled.

Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix wrong tc bandwidth weight data issue

Currently, the weight saved by the driver is used as the query result,
which may be different from the actual weight in the register.
Therefore, the register value read from the firmware is used
as the query result

Fixes: 0e32038dc856 ("net: hns3: refactor dump tc of debugfs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: add tm flush when setting tm

When the tm module is configured with traffic, traffic
may be abnormal. This patch fixes this problem.
Before the tm module is configured, traffic processing
should be stopped. After the tm module is configured,
traffic processing is enabled.

Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix the imp capability bit cannot exceed 32 bits issue

Current only the first 32 bits of the capability flag bit are considered.
When the matching capability flag bit is greater than 31 bits,
it will get an error bit.This patch use bitmap to solve this issue.
It can handle each capability bit whitout bit width limit.

Fixes: da77aef9cc58 ("net: hns3: create common cmdq resource allocate/free/query APIs")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: marvell10g: fix 88x3310 power up

Clear MV_V2_PORT_CTRL_PWRDOWN bit to set power up for 88x3310 PHY,
it sometimes does not take effect immediately. And a read of this
register causes the bit not to clear. This will cause mv3310_reset()
to time out, which will fail the config initialization. So add a delay
before the next access.

Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs: net: clarify the NAPI rules around XDP Tx

page pool and XDP should not be accessed from IRQ context
which may happen if drivers try to clean up XDP TX with
NAPI budget of 0.

Link: https://lore.kernel.org/r/20230720161323.2025379-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.5-rc3' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF, netfilter, bluetooth and CAN.

  Current release - regressions:

   - eth: r8169: multiple fixes for PCIe ASPM-related problems

   - vrf: fix RCU lockdep splat in output path

  Previous releases - regressions:

   - gso: fall back to SW segmenting with GSO_UDP_L4 dodgy bit set

   - dsa: mv88e6xxx: do a final check before timing out when polling

   - nf_tables: fix sleep in atomic in nft_chain_validate

  Previous releases - always broken:

   - sched: fix undoing tcf_bind_filter() in multiple classifiers

   - bpf, arm64: fix BTI type used for freplace attached functions

   - can: gs_usb: fix time stamp counter initialization

   - nft_set_pipapo: fix improper element removal (leading to UAF)

  Misc:

   - net: support STP on bridge in non-root netns, STP prevents packet
     loops so not supporting it results in freezing systems of
     unsuspecting users, and in turn very upset noises being made

   - fix kdoc warnings

   - annotate various bits of TCP state to prevent data races"

* tag 'net-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
  net: phy: prevent stale pointer dereference in phy_init()
  tcp: annotate data-races around fastopenq.max_qlen
  tcp: annotate data-races around icsk->icsk_user_timeout
  tcp: annotate data-races around tp->notsent_lowat
  tcp: annotate data-races around rskq_defer_accept
  tcp: annotate data-races around tp->linger2
  tcp: annotate data-races around icsk->icsk_syn_retries
  tcp: annotate data-races around tp->keepalive_probes
  tcp: annotate data-races around tp->keepalive_intvl
  tcp: annotate data-races around tp->keepalive_time
  tcp: annotate data-races around tp->tsoffset
  tcp: annotate data-races around tp->tcp_tx_delay
  Bluetooth: MGMT: Use correct address for memcpy()
  Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
  Bluetooth: SCO: fix sco_conn related locking and validity issues
  Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
  Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
  Bluetooth: coredump: fix building with coredump disabled
  Bluetooth: ISO: fix iso_conn related locking and validity issues
  Bluetooth: hci_event: call disconnect callback before deleting conn
  ...

Merge tag 'for-net-2023-07-20' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- Fix building with coredump disabled
- Fix use-after-free in hci_remove_adv_monitor
- Use RCU for hci_conn_params and iterate safely in hci_sync
- Fix locking issues on ISO and SCO
- Fix bluetooth on Intel Macbook 2014

* tag 'for-net-2023-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: MGMT: Use correct address for memcpy()
  Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
  Bluetooth: SCO: fix sco_conn related locking and validity issues
  Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
  Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
  Bluetooth: coredump: fix building with coredump disabled
  Bluetooth: ISO: fix iso_conn related locking and validity issues
  Bluetooth: hci_event: call disconnect callback before deleting conn
  Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync
====================

Link: https://lore.kernel.org/r/20230720190201.446469-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nf-23-07-20' of https://git./linux/kernel/git/netfilter/nf

Florian Westphal says:

====================
Netfilter fixes for net:

The following patchset contains Netfilter fixes for net:

1. Fix spurious -EEXIST error from userspace due to
   padding holes, this was broken since 4.9 days
   when 'ignore duplicate entries on insert' feature was
   added.

2. Fix a sched-while-atomic bug, present since 5.19.

3. Properly remove elements if they lack an "end range".
   nft userspace always sets an end range attribute, even
   when its the same as the start, but the abi doesn't
   have such a restriction. Always broken since it was
   added in 5.6, all three from myself.

4 + 5: Bound chain needs to be skipped in netns release
   and on rule flush paths, from Pablo Neira.

* tag 'nf-23-07-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: skip bound chain on rule flush
  netfilter: nf_tables: skip bound chain in netns release path
  netfilter: nft_set_pipapo: fix improper element removal
  netfilter: nf_tables: can't schedule in nft_chain_validate
  netfilter: nf_tables: fix spurious set element insertion failure
====================

Link: https://lore.kernel.org/r/20230720165143.30208-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: prevent stale pointer dereference in phy_init()

mdio_bus_init() and phy_driver_register() both have error paths, and if
those are ever hit, ethtool will have a stale pointer to the
phy_ethtool_phy_ops stub structure, which references memory from a
module that failed to load (phylib).

It is probably hard to force an error in this code path even manually,
but the error teardown path of phy_init() should be the same as
phy_exit(), which is now simply not the case.

Fixes: 55d8f053ce1b ("net: phy: Register ethtool PHY operations")
Link: https://lore.kernel.org/netdev/ZLaiJ4G6TaJYGJyU@shell.armlinux.org.uk/
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230720000231.1939689-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tcp-add-missing-annotations'

Eric Dumazet says:

====================
tcp: add missing annotations

This series was inspired by one syzbot (KCSAN) report.

do_tcp_getsockopt() does not lock the socket, we need to
annotate most of the reads there (and other places as well).

This is a first round, another series will come later.
====================

Link: https://lore.kernel.org/r/20230719212857.3943972-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around fastopenq.max_qlen

This field can be read locklessly.

Fixes: 1536e2857bd3 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around icsk->icsk_user_timeout

This field can be read locklessly from do_tcp_getsockopt()

Fixes: dca43c75e7e5 ("tcp: Add TCP_USER_TIMEOUT socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around tp->notsent_lowat

tp->notsent_lowat can be read locklessly from do_tcp_getsockopt()
and tcp_poll().

Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around rskq_defer_accept

do_tcp_getsockopt() reads rskq_defer_accept while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around tp->linger2

do_tcp_getsockopt() reads tp->linger2 while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around icsk->icsk_syn_retries

do_tcp_getsockopt() and reqsk_timer_handler() read
icsk->icsk_syn_retries while another cpu might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around tp->keepalive_probes

do_tcp_getsockopt() reads tp->keepalive_probes while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around tp->keepalive_intvl

do_tcp_getsockopt() reads tp->keepalive_intvl while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around tp->keepalive_time

do_tcp_getsockopt() reads tp->keepalive_time while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around tp->tsoffset

do_tcp_getsockopt() reads tp->tsoffset while another cpu
might change its value.

Fixes: 93be6ce0e91b ("tcp: set and get per-socket timestamp")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around tp->tcp_tx_delay

do_tcp_getsockopt() reads tp->tcp_tx_delay while another cpu
might change its value.

Fixes: a842fe1425cb ("tcp: add optional per socket transmit delay")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: MGMT: Use correct address for memcpy()

In function ‘fortify_memcpy_chk’,
    inlined from ‘get_conn_info_complete’ at net/bluetooth/mgmt.c:7281:2:
include/linux/fortify-string.h:592:25: error: call to
‘__read_overflow2_field’ declared with attribute warning: detected read
beyond size of field (2nd parameter); maybe use struct_group()?
[-Werror=attribute-warning]
  592 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

This is due to the wrong member is used for memcpy(). Use correct one.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014

Commit c13380a55522 ("Bluetooth: btusb: Do not require hardcoded
interface numbers") inadvertedly broke bluetooth on Intel Macbook 2014.
The intention was to keep behavior intact when BTUSB_IFNUM_2 is set and
otherwise allow any interface numbers. The problem is that the new logic
condition omits the case where bInterfaceNumber is 0.

Fix BTUSB_IFNUM_2 handling by allowing both interface number 0 and 2
when the flag is set.

Fixes: c13380a55522 ("Bluetooth: btusb: Do not require hardcoded interface numbers")
Reported-by: John Holland <johnbholland@icloud.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217651
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Tested-by: John Holland<johnbholland@icloud.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: SCO: fix sco_conn related locking and validity issues

Operations that check/update sk_state and access conn should hold
lock_sock, otherwise they can race.

The order of taking locks is hci_dev_lock > lock_sock > sco_conn_lock,
which is how it is in connect/disconnect_cfm -> sco_conn_del ->
sco_chan_del.

Fix locking in sco_connect to take lock_sock around updating sk_state
and conn.

sco_conn_del must not occur during sco_connect, as it frees the
sco_conn. Hold hdev->lock longer to prevent that.

sco_conn_add shall return sco_conn with valid hcon. Make it so also when
reusing an old SCO connection waiting for disconnect timeout (see
__sco_sock_close where conn->hcon is set to NULL).

This should not reintroduce the issue fixed in the earlier
commit 9a8ec9e8ebb5 ("Bluetooth: SCO: Fix possible circular locking
dependency on sco_connect_cfm"), the relevant fix of releasing lock_sock
in sco_sock_connect before acquiring hdev->lock is retained.

These changes mirror similar fixes earlier in ISO sockets.

Fixes: 9a8ec9e8ebb5 ("Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link

hci_connect_sco currently returns NULL when there is no link (i.e. when
hci_conn_link() returns NULL).

sco_connect() expects an ERR_PTR in case of any error (see line 266 in
sco.c). Thus, hcon set as NULL passes through to sco_conn_add(), which
tries to get hcon->hdev, resulting in dereferencing a NULL pointer as
reported by syzkaller.

The same issue exists for iso_connect_cis() calling hci_connect_cis().

Thus, make hci_connect_sco() and hci_connect_cis() return ERR_PTR
instead of NULL.

Reported-and-tested-by: syzbot+37acd5d80d00d609d233@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=37acd5d80d00d609d233
Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()

KASAN reports that there's a use-after-free in
hci_remove_adv_monitor(). Trawling through the disassembly, you can
see that the complaint is from the access in bt_dev_dbg() under the
HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because
msft_remove_monitor() can end up freeing the monitor
structure. Specifically:
  hci_remove_adv_monitor() ->
  msft_remove_monitor() ->
  msft_remove_monitor_sync() ->
  msft_le_cancel_monitor_advertisement_cb() ->
  hci_free_adv_monitor()

Let's fix the problem by just stashing the relevant data when it's
still valid.

Fixes: 7cf5c2978f23 ("Bluetooth: hci_sync: Refactor remove Adv Monitor")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: coredump: fix building with coredump disabled

The btmtk driver uses an IS_ENABLED() check to conditionally compile
the coredump support, but this fails to build because the hdev->dump
member is in an #ifdef:

drivers/bluetooth/btmtk.c: In function 'btmtk_process_coredump':
drivers/bluetooth/btmtk.c:386:30: error: 'struct hci_dev' has no member named 'dump'
386 | schedule_delayed_work(&hdev->dump.dump_timeout,
| ^~

The struct member doesn't really make a huge difference in the total size,
so just remove the #ifdef around it to avoid adding similar checks
around each user.

Fixes: 872f8c253cb9e ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Fixes: 9695ef876fd12 ("Bluetooth: Add support for hci devcoredump")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: ISO: fix iso_conn related locking and validity issues

sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations
that check/update sk_state and access conn should hold lock_sock,
otherwise they can race.

The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock,
which is how it is in connect/disconnect_cfm -> iso_conn_del ->
iso_chan_del.

Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock
around updating sk_state and conn.

iso_conn_del must not occur during iso_connect_cis/bis, as it frees the
iso_conn. Hold hdev->lock longer to prevent that.

This should not reintroduce the issue fixed in commit 241f51931c35
("Bluetooth: ISO: Avoid circular locking dependency"), since the we
acquire locks in order. We retain the fix in iso_sock_connect to release
lock_sock before iso_connect_* acquires hdev->lock.

Similarly for commit 6a5ad251b7cd ("Bluetooth: ISO: Fix possible
circular locking dependency"). We retain the fix in iso_conn_ready to
not acquire iso_conn_lock before lock_sock.

iso_conn_add shall return iso_conn with valid hcon. Make it so also when
reusing an old CIS connection waiting for disconnect timeout (see
__iso_sock_close where conn->hcon is set to NULL).

Trace with iso_conn_del after iso_chan_add in iso_connect_cis:
===============================================================
iso_sock_create:771: sock 00000000be9b69b7
iso_sock_init:693: sk 000000004dff667e
iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_connect:875: sk 000000004dff667e
iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da
iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e
__iso_chan_add:214: conn 00000000daf8625e
iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12
iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16
iso_sock_clear_timer:117: sock 000000004dff667e state 3
    <Note: sk_state is BT_BOUND (3), so iso_connect_cis is still
    running at this point>
iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16
hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535
hci_conn_unlink:1102: hci0: hcon 000000007b65d182
hci_chan_list_flush:2780: hcon 000000007b65d182
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1
__iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7
     <Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets
     BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it
     must be that iso_chan_del occurred between iso_chan_add and end of
     iso_connect_cis.>
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth
===============================================================

Trace with iso_conn_del before iso_chan_add in iso_connect_cis:
===============================================================
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504
hci_dev_put:1487: hci0 orig refcnt 21
hci_event_packet:7607: hci0: event 0x0e
hci_cmd_complete_evt:4231: hci0: opcode 0x2062
hci_cc_le_set_cig_params:3846: hci0: status 0x07
hci_sent_cmd_data:3107: hci0 opcode 0x2062
iso_connect_cfm:1703: hcon 0000000093bc551f bdaddr 28:3d:c2:4a:7e:da status 7
iso_conn_del:187: hcon 0000000093bc551f conn 00000000768ae504, err 12
hci_conn_del:1151: hci0 hcon 0000000093bc551f handle 65535
hci_conn_unlink:1102: hci0: hcon 0000000093bc551f
hci_chan_list_flush:2780: hcon 0000000093bc551f
__iso_chan_add:214: conn 00000000768ae504
    <Note: this conn was already freed in iso_conn_del above>
iso_sock_clear_timer:117: sock 0000000098323f95 state 3
general protection fault, probably for non-canonical address 0x30b29c630930aec8: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1920 Comm: bluetoothd Tainted: G            E      6.3.0-rc7+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:detach_if_pending+0x28/0xd0
Code: 90 90 0f 1f 44 00 00 48 8b 47 08 48 85 c0 0f 84 ad 00 00 00 55 89 d5 53 48 83 3f 00 48 89 fb 74 7d 66 90 48 8b 03 48 8b 53 08 <>
RSP: 0018:ffffb90841a67d08 EFLAGS: 00010007
RAX: 0000000000000000 RBX: ffff9141bd5061b8 RCX: 0000000000000000
RDX: 30b29c630930aec8 RSI: ffff9141fdd21e80 RDI: ffff9141bd5061b8
RBP: 0000000000000001 R08: 0000000000000000 R09: ffffb90841a67b88
R10: 0000000000000003 R11: ffffffff8613f558 R12: ffff9141fdd21e80
R13: 0000000000000000 R14: ffff9141b5976010 R15: ffff914185755338
FS:  00007f45768bd840(0000) GS:ffff9141fdd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000619000424074 CR3: 0000000009f5e005 CR4: 0000000000170ee0
Call Trace:
<TASK>
timer_delete+0x48/0x80
try_to_grab_pending+0xdf/0x170
__cancel_work+0x37/0xb0
iso_connect_cis+0x141/0x400 [bluetooth]
===============================================================

Trace with NULL conn->hcon in state BT_CONNECT:
===============================================================
__iso_sock_close:619: sk 00000000f7c71fc5 state 1 socket 00000000d90c5fe5
...
__iso_sock_close:619: sk 00000000f7c71fc5 state 8 socket 00000000d90c5fe5
iso_chan_del:153: sk 00000000f7c71fc5, conn 0000000022c03a7e, err 104
...
iso_sock_connect:862: sk 00000000129b56c3
iso_connect_cis:348: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a
hci_dev_hold:1495: hci0 orig refcnt 19
__iso_chan_add:214: conn 0000000022c03a7e
    <Note: reusing old conn>
iso_sock_clear_timer:117: sock 00000000129b56c3 state 3
...
iso_sock_ready:1485: sk 00000000129b56c3
...
iso_sock_sendmsg:1077: sock 00000000e5013966, sk 00000000129b56c3
BUG: kernel NULL pointer dereference, address: 00000000000006a8
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1403 Comm: wireplumber Tainted: G            E      6.3.0-rc7+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:iso_sock_sendmsg+0x63/0x2a0 [bluetooth]
===============================================================

Fixes: 241f51931c35 ("Bluetooth: ISO: Avoid circular locking dependency")
Fixes: 6a5ad251b7cd ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_event: call disconnect callback before deleting conn

In hci_cs_disconnect, we do hci_conn_del even if disconnection failed.

ISO, L2CAP and SCO connections refer to the hci_conn without
hci_conn_get, so disconn_cfm must be called so they can clean up their
conn, otherwise use-after-free occurs.

ISO:
==========================================================
iso_sock_connect:880: sk 00000000eabd6557
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon 000000001696f1fd conn 00000000b6251073
hci_dev_put:1487: hci0 orig refcnt 17
__iso_chan_add:214: conn 00000000b6251073
iso_sock_clear_timer:117: sock 00000000eabd6557 state 3
...
hci_rx_work:4085: hci0 Event packet
hci_event_packet:7601: hci0: event 0x0f
hci_cmd_status_evt:4346: hci0: opcode 0x0406
hci_cs_disconnect:2760: hci0: status 0x0c
hci_sent_cmd_data:3107: hci0 opcode 0x0406
hci_conn_del:1151: hci0 hcon 000000001696f1fd handle 2560
hci_conn_unlink:1102: hci0: hcon 000000001696f1fd
hci_conn_drop:1451: hcon 00000000d8521aaf orig refcnt 2
hci_chan_list_flush:2780: hcon 000000001696f1fd
hci_dev_put:1487: hci0 orig refcnt 21
hci_dev_put:1487: hci0 orig refcnt 20
hci_req_cmd_complete:3978: opcode 0x0406 status 0x0c
... <no iso_* activity on sk/conn> ...
iso_sock_sendmsg:1098: sock 00000000dea5e2e0, sk 00000000eabd6557
BUG: kernel NULL pointer dereference, address: 0000000000000668
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:iso_sock_sendmsg (net/bluetooth/iso.c:1112) bluetooth
==========================================================

L2CAP:
==================================================================
hci_cmd_status_evt:4359: hci0: opcode 0x0406
hci_cs_disconnect:2760: hci0: status 0x0c
hci_sent_cmd_data:3085: hci0 opcode 0x0406
hci_conn_del:1151: hci0 hcon ffff88800c999000 handle 3585
hci_conn_unlink:1102: hci0: hcon ffff88800c999000
hci_chan_list_flush:2780: hcon ffff88800c999000
hci_chan_del:2761: hci0 hcon ffff88800c999000 chan ffff888018ddd280
...
BUG: KASAN: slab-use-after-free in hci_send_acl+0x2d/0x540 [bluetooth]
Read of size 8 at addr ffff888018ddd298 by task bluetoothd/1175

CPU: 0 PID: 1175 Comm: bluetoothd Tainted: G E 6.4.0-rc4+ #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0xf8/0x180
? hci_send_acl+0x2d/0x540 [bluetooth]
kasan_report+0xa8/0xe0
? hci_send_acl+0x2d/0x540 [bluetooth]
hci_send_acl+0x2d/0x540 [bluetooth]
? __pfx___lock_acquire+0x10/0x10
l2cap_chan_send+0x1fd/0x1300 [bluetooth]
? l2cap_sock_sendmsg+0xf2/0x170 [bluetooth]
? __pfx_l2cap_chan_send+0x10/0x10 [bluetooth]
? lock_release+0x1d5/0x3c0
? mark_held_locks+0x1a/0x90
l2cap_sock_sendmsg+0x100/0x170 [bluetooth]
sock_write_iter+0x275/0x280
? __pfx_sock_write_iter+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
do_iter_readv_writev+0x176/0x220
? __pfx_do_iter_readv_writev+0x10/0x10
? find_held_lock+0x83/0xa0
? selinux_file_permission+0x13e/0x210
do_iter_write+0xda/0x340
vfs_writev+0x1b4/0x400
? __pfx_vfs_writev+0x10/0x10
? __seccomp_filter+0x112/0x750
? populate_seccomp_data+0x182/0x220
? __fget_light+0xdf/0x100
? do_writev+0x19d/0x210
do_writev+0x19d/0x210
? __pfx_do_writev+0x10/0x10
? mark_held_locks+0x1a/0x90
do_syscall_64+0x60/0x90
? lockdep_hardirqs_on_prepare+0x149/0x210
? do_syscall_64+0x6c/0x90
? lockdep_hardirqs_on_prepare+0x149/0x210
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7ff45cb23e64
Code: 15 d1 1f 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 9d a7 0d 00 00 74 13 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
RSP: 002b:00007fff21ae09b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007ff45cb23e64
RDX: 0000000000000001 RSI: 00007fff21ae0aa0 RDI: 0000000000000017
RBP: 00007fff21ae0aa0 R08: 000000000095a8a0 R09: 0000607000053f40
R10: 0000000000000001 R11: 0000000000000202 R12: 00007fff21ae0ac0
R13: 00000fffe435c150 R14: 00007fff21ae0a80 R15: 000060f000000040
</TASK>

Allocated by task 771:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
__kasan_kmalloc+0xaa/0xb0
hci_chan_create+0x67/0x1b0 [bluetooth]
l2cap_conn_add.part.0+0x17/0x590 [bluetooth]
l2cap_connect_cfm+0x266/0x6b0 [bluetooth]
hci_le_remote_feat_complete_evt+0x167/0x310 [bluetooth]
hci_event_packet+0x38d/0x800 [bluetooth]
hci_rx_work+0x287/0xb20 [bluetooth]
process_one_work+0x4f7/0x970
worker_thread+0x8f/0x620
kthread+0x17f/0x1c0
ret_from_fork+0x2c/0x50

Freed by task 771:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2e/0x50
____kasan_slab_free+0x169/0x1c0
slab_free_freelist_hook+0x9e/0x1c0
__kmem_cache_free+0xc0/0x310
hci_chan_list_flush+0x46/0x90 [bluetooth]
hci_conn_cleanup+0x7d/0x330 [bluetooth]
hci_cs_disconnect+0x35d/0x530 [bluetooth]
hci_cmd_status_evt+0xef/0x2b0 [bluetooth]
hci_event_packet+0x38d/0x800 [bluetooth]
hci_rx_work+0x287/0xb20 [bluetooth]
process_one_work+0x4f7/0x970
worker_thread+0x8f/0x620
kthread+0x17f/0x1c0
ret_from_fork+0x2c/0x50
==================================================================

Fixes: b8d290525e39 ("Bluetooth: clean up connection in hci_cs_disconnect")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync

hci_update_accept_list_sync iterates over hdev->pend_le_conns and
hdev->pend_le_reports, and waits for controller events in the loop body,
without holding hdev lock.

Meanwhile, these lists and the items may be modified e.g. by
le_scan_cleanup. This can invalidate the list cursor or any other item
in the list, resulting to invalid behavior (eg use-after-free).

Use RCU for the hci_conn_params action lists. Since the loop bodies in
hci_sync block and we cannot use RCU or hdev->lock for the whole loop,
copy list items first and then iterate on the copy. Only the flags field
is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we
read valid values.

Free params everywhere with hci_conn_params_free so the cleanup is
guaranteed to be done properly.

This fixes the following, which can be triggered e.g. by BlueZ new
mgmt-tester case "Add + Remove Device Nowait - Success", or by changing
hci_le_set_cig_params to always return false, and running iso-tester:

==================================================================
BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32

Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107)
print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
kasan_report (mm/kasan/report.c:538)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780)
? mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_unlock (kernel/locking/mutex.c:538)
? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:306)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
? __pfx_worker_thread (kernel/workqueue.c:2480)
kthread (kernel/kthread.c:376)
? __pfx_kthread (kernel/kthread.c:331)
ret_from_fork (arch/x86/entry/entry_64.S:314)
</TASK>

Allocated by task 31:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
__kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383)
hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277)
hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589)
hci_connect_cis (net/bluetooth/hci_conn.c:2266)
iso_connect_cis (net/bluetooth/iso.c:390)
iso_sock_connect (net/bluetooth/iso.c:899)
__sys_connect (net/socket.c:2003 net/socket.c:2020)
__x64_sys_connect (net/socket.c:2027)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

Freed by task 15:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
kasan_save_free_info (mm/kasan/generic.c:523)
__kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244)
__kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800)
hci_conn_params_del (net/bluetooth/hci_core.c:2323)
le_scan_cleanup (net/bluetooth/hci_conn.c:202)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
kthread (kernel/kthread.c:376)
ret_from_fork (arch/x86/entry/entry_64.S:314)
==================================================================

Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Merge tag 'iomap-6.5-fixes-1' of git://git./fs/xfs/xfs-linux

Pull iomap fix from Darrick Wong:
"Fix partial write regression.

  It turns out that fstests doesn't have any test coverage for short
  writes, but LTP does. Fortunately, this was caught right after -rc1
  was tagged.

  Summary:

   - Fix a bug wherein a failed write could clobber short write status"

* tag 'iomap-6.5-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: micro optimize the ki_pos assignment in iomap_file_buffered_write
  iomap: fix a regression for partial write errors

Merge tag 'xfs-6.5-fixes-1' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"Flexarray declaration conversions.

  This probably should've been done with the merge window open, but I
  was not aware that the UBSAN knob would be getting turned up for 6.5,
  and the fstests failures due to the kernel warnings are getting in the
  way of testing.

  Summary:

   - Convert all the array[1] declarations into the accepted flex
     array[] declarations so that UBSAN and friends will not get
     confused"

* tag 'xfs-6.5-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: convert flex-array declarations in xfs attr shortform objects
  xfs: convert flex-array declarations in xfs attr leaf blocks
  xfs: convert flex-array declarations in struct xfs_attrlist*

netfilter: nf_tables: skip bound chain on rule flush

Skip bound chain when flushing table rules, the rule that owns this
chain releases these objects.

Otherwise, the following warning is triggered:

  WARNING: CPU: 2 PID: 1217 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
  CPU: 2 PID: 1217 Comm: chain-flush Not tainted 6.1.39 #1
  RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: Kevin Rich <kevinrich1337@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

Merge tag 'for-6.5-rc2-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"Stable fixes:

   - fix race between balance and cancel/pause

   - various iput() fixes

   - fix use-after-free of new block group that became unused

   - fix warning when putting transaction with qgroups enabled after
     abort

   - fix crash in subpage mode when page could be released between map
     and map read

   - when scrubbing raid56 verify the P/Q stripes unconditionally

   - fix minor memory leak in zoned mode when a block group with an
     unexpected superblock is found

  Regression fixes:

   - fix ordered extent split error handling when submitting direct IO

   - user irq-safe locking when adding delayed iputs"

* tag 'for-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix warning when putting transaction with qgroups enabled after abort
  btrfs: fix ordered extent split error handling in btrfs_dio_submit_io
  btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand
  btrfs: raid56: always verify the P/Q contents for scrub
  btrfs: use irq safe locking when running and adding delayed iputs
  btrfs: fix iput() on error pointer after error during orphan cleanup
  btrfs: fix double iput() on inode after an error during orphan cleanup
  btrfs: zoned: fix memory leak after finding block group with super blocks
  btrfs: fix use-after-free of new block group that became unused
  btrfs: be a bit more careful when setting mirror_num_ret in btrfs_map_block
  btrfs: fix race between balance and cancel/pause

Merge tag 'regulator-fix-v6.5-rc1' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
"One fix for an issue with parsing partially specified DTs"

* tag 'regulator-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: da9063: fix null pointer deref with partial DT config

netfilter: nf_tables: skip bound chain in netns release path

Skip bound chain from netns release path, the rule that owns this chain
releases these objects.

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nft_set_pipapo: fix improper element removal

end key should be equal to start unless NFT_SET_EXT_KEY_END is present.

Its possible to add elements that only have a start key
("{ 1.0.0.0 . 2.0.0.0 }") without an internval end.

Insertion treats this via:

if (nft_set_ext_exists(ext, NFT_SET_EXT_KEY_END))
end = (const u8 *)nft_set_ext_key_end(ext)->data;
else
end = start;

but removal side always uses nft_set_ext_key_end().
This is wrong and leads to garbage remaining in the set after removal
next lookup/insert attempt will give:

BUG: KASAN: slab-use-after-free in pipapo_get+0x8eb/0xb90
Read of size 1 at addr ffff888100d50586 by task nft-pipapo_uaf_/1399
Call Trace:
kasan_report+0x105/0x140
pipapo_get+0x8eb/0xb90
nft_pipapo_insert+0x1dc/0x1710
nf_tables_newsetelem+0x31f5/0x4e00
..

Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: lonial con <kongln9170@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nf_tables: can't schedule in nft_chain_validate

Can be called via nft set element list iteration, which may acquire
rcu and/or bh read lock (depends on set type).

BUG: sleeping function called from invalid context at net/netfilter/nf_tables_api.c:3353
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1232, name: nft
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
2 locks held by nft/1232:
#0: ffff8881180e3ea8 (&nft_net->commit_mutex){+.+.}-{3:3}, at: nf_tables_valid_genid
#1: ffffffff83f5f540 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire
Call Trace:
nft_chain_validate
nft_lookup_validate_setelem
nft_pipapo_walk
nft_lookup_validate
nft_chain_validate
nft_immediate_validate
nft_chain_validate
nf_tables_validate
nf_tables_abort

No choice but to move it to nf_tables_validate().

Fixes: 81ea01066741 ("netfilter: nf_tables: add rescheduling points during loop detection walks")
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nf_tables: fix spurious set element insertion failure

On some platforms there is a padding hole in the nft_verdict
structure, between the verdict code and the chain pointer.

On element insertion, if the new element clashes with an existing one and
NLM_F_EXCL flag isn't set, we want to ignore the -EEXIST error as long as
the data associated with duplicated element is the same as the existing
one. The data equality check uses memcmp.

For normal data (NFT_DATA_VALUE) this works fine, but for NFT_DATA_VERDICT
padding area leads to spurious failure even if the verdict data is the
same.

This then makes the insertion fail with 'already exists' error, even
though the new "key : data" matches an existing entry and userspace
told the kernel that it doesn't want to receive an error indication.

Fixes: c016c7e45ddf ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion")
Signed-off-by: Florian Westphal <fw@strlen.de>

Merge branch 'net-support-stp-on-bridge-in-non-root-netns'

Kuniyuki Iwashima says:

====================
net: Support STP on bridge in non-root netns.

Currently, STP does not work in non-root netns as llc_rcv() drops
packets from non-root netns.

This series fixes it by making some protocol handlers netns-aware,
which are called from llc_rcv() as follows:

  llc_rcv()
  |
  |- sap->rcv_func : registered by llc_sap_open()
  |
  |  * functions : regsitered by register_8022_client()
  |    -> No in-kernel user call register_8022_client()
  |
  |  * snap_rcv()
  |    |
  |    `- proto->rcvfunc() : registered by register_snap_client()
  |
  |       * aarp_rcv()  : drop packets from non-root netns
  |       * atalk_rcv() : drop packets from non-root netns
  |
  |  * stp_pdu_rcv()
  |    |
  |    `- garp_protos[]->rcv() : registered by stp_proto_register()
  |
  |       * garp_pdu_rcv() : netns-aware
  |       * br_stp_rcv()   : netns-aware
  |
  |- llc_type_handlers[llc_pdu_type(skb) - 1]
  |
  |  * llc_sap_handler()  : NOT netns-aware (Patch 1)
  |  * llc_conn_handler() : NOT netns-aware (Patch 2)
  |
  `- llc_station_handler

     * llc_station_rcv() : netns-aware

Patch 1 & 2 convert not-netns-aware functions and Patch 3 remove the
netns restriction in llc_rcv().

Note this series does not namespacify AF_LLC so that these patches
can be backported to stable without conflicts (at least to 4.14.y).

Another series that adds netns support for AF_LLC will be targeted
to net-next later.
====================

Link: https://lore.kernel.org/r/20230718174152.57408-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Revert "bridge: Add extack warning when enabling STP in netns."

This reverts commit 56a16035bb6effb37177867cea94c13a8382f745.

Since the previous commit, STP works on bridge in netns.

  # unshare -n
  # ip link add br0 type bridge
  # ip link add veth0 type veth peer name veth1

  # ip link set veth0 master br0 up
  [   50.558135] br0: port 1(veth0) entered blocking state
  [   50.558366] br0: port 1(veth0) entered disabled state
  [   50.558798] veth0: entered allmulticast mode
  [   50.564401] veth0: entered promiscuous mode

  # ip link set veth1 master br0 up
  [   54.215487] br0: port 2(veth1) entered blocking state
  [   54.215657] br0: port 2(veth1) entered disabled state
  [   54.215848] veth1: entered allmulticast mode
  [   54.219577] veth1: entered promiscuous mode

  # ip link set br0 type bridge stp_state 1
  # ip link set br0 up
  [   61.960726] br0: port 2(veth1) entered blocking state
  [   61.961097] br0: port 2(veth1) entered listening state
  [   61.961495] br0: port 1(veth0) entered blocking state
  [   61.961653] br0: port 1(veth0) entered listening state
  [   63.998835] br0: port 2(veth1) entered blocking state
  [   77.437113] br0: port 1(veth0) entered learning state
  [   86.653501] br0: received packet on veth0 with own address as source address (addr:6e:0f:e7:6f:5f:5f, vlan:0)
  [   92.797095] br0: port 1(veth0) entered forwarding state
  [   92.797398] br0: topology change detected, propagating

Let's remove the warning.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

llc: Don't drop packet from non-root netns.

Now these upper layer protocol handlers can be called from llc_rcv()
as sap->rcv_func(), which is registered by llc_sap_open().

  * function which is passed to register_8022_client()
    -> no in-kernel user calls register_8022_client().

  * snap_rcv()
    `- proto->rcvfunc() : registered by register_snap_client()
       -> aarp_rcv() and atalk_rcv() drop packets from non-root netns

  * stp_pdu_rcv()
    `- garp_protos[]->rcv() : registered by stp_proto_register()
       -> garp_pdu_rcv() and br_stp_rcv() are netns-aware

So, we can safely remove the netns restriction in llc_rcv().

Fixes: e730c15519d0 ("[NET]: Make packet reception network namespace safe")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

llc: Check netns in llc_estab_match() and llc_listener_match().

We will remove this restriction in llc_rcv() in the following patch,
which means that the protocol handler must be aware of netns.

        if (!net_eq(dev_net(dev), &init_net))
                goto drop;

llc_rcv() fetches llc_type_handlers[llc_pdu_type(skb) - 1] and calls it
if not NULL.

If the PDU type is LLC_DEST_CONN, llc_conn_handler() is called to pass
skb to corresponding sockets.  Then, we must look up a proper socket in
the same netns with skb->dev.

llc_conn_handler() calls __llc_lookup() to look up a established or
litening socket by __llc_lookup_established() and llc_lookup_listener().

Both functions iterate on a list and call llc_estab_match() or
llc_listener_match() to check if the socket is the correct destination.
However, these functions do not check netns.

Also, bind() and connect() call llc_establish_connection(), which
finally calls __llc_lookup_established(), to check if there is a
conflicting socket.

Let's test netns in llc_estab_match() and llc_listener_match().

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

llc: Check netns in llc_dgram_match().

We will remove this restriction in llc_rcv() soon, which means that the
protocol handler must be aware of netns.

if (!net_eq(dev_net(dev), &init_net))
goto drop;

llc_rcv() fetches llc_type_handlers[llc_pdu_type(skb) - 1] and calls it
if not NULL.

If the PDU type is LLC_DEST_SAP, llc_sap_handler() is called to pass skb
to corresponding sockets.  Then, we must look up a proper socket in the
same netns with skb->dev.

If the destination is a multicast address, llc_sap_handler() calls
llc_sap_mcast().  It calculates a hash based on DSAP and skb->dev->ifindex,
iterates on a socket list, and calls llc_mcast_match() to check if the
socket is the correct destination.  Then, llc_mcast_match() checks if
skb->dev matches with llc_sk(sk)->dev.  So, we need not check netns here.

OTOH, if the destination is a unicast address, llc_sap_handler() calls
llc_lookup_dgram() to look up a socket, but it does not check the netns.

Therefore, we need to add netns check in llc_lookup_dgram().

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ethernet: mtk_eth_soc: always mtk_get_ib1_pkt_type

entries and bind debugfs files would display wrong data on NETSYS_V2 and
later because instead of using mtk_get_ib1_pkt_type the driver would use
MTK_FOE_IB1_PACKET_TYPE which corresponds to NETSYS_V1(.x) SoCs.
Use mtk_get_ib1_pkt_type so entries and bind records display correctly.

Fixes: 03a3180e5c09e ("net: ethernet: mtk_eth_soc: introduce flow offloading support for mt7986")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c0ae03d0182f4d27b874cbdf0059bc972c317f3c.1689727134.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'r8169-revert-two-changes-that-caused-regressions'

Heiner Kallweit says:

====================
r8169: revert two changes that caused regressions

This reverts two changes that caused regressions.
====================

Link: https://lore.kernel.org/r/ddadceae-19c9-81b8-47b5-a4ff85e2563a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "r8169: disable ASPM during NAPI poll"

This reverts commit e1ed3e4d91112027b90c7ee61479141b3f948e6a.

Turned out the change causes a performance regression.

Link: https://lore.kernel.org/netdev/20230713124914.GA12924@green245/T/
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/055c6bc2-74fa-8c67-9897-3f658abb5ae7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8169: revert 2ab19de62d67 ("r8169: remove ASPM restrictions now that ASPM is disabled during NAPI poll")

There have been reports that on a number of systems this change breaks
network connectivity. Therefore effectively revert it. Mainly affected
seem to be systems where BIOS denies ASPM access to OS.
Due to later changes we can't do a direct revert.

Fixes: 2ab19de62d67 ("r8169: remove ASPM restrictions now that ASPM is disabled during NAPI poll")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/e47bac0d-e802-65e1-b311-6acb26d5cf10@freenet.de/T/
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217596
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/57f13ec0-b216-d5d8-363d-5b05528ec5fb@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "tcp: avoid the lookup process failing to get sk in ehash table"

This reverts commit 3f4ca5fafc08881d7a57daa20449d171f2887043.

Commit 3f4ca5fafc08 ("tcp: avoid the lookup process failing to get sk in
ehash table") reversed the order in how a socket is inserted into ehash
to fix an issue that ehash-lookup could fail when reqsk/full sk/twsk are
swapped.  However, it introduced another lookup failure.

The full socket in ehash is allocated from a slab with SLAB_TYPESAFE_BY_RCU
and does not have SOCK_RCU_FREE, so the socket could be reused even while
it is being referenced on another CPU doing RCU lookup.

Let's say a socket is reused and inserted into the same hash bucket during
lookup.  After the blamed commit, a new socket is inserted at the end of
the list.  If that happens, we will skip sockets placed after the previous
position of the reused socket, resulting in ehash lookup failure.

As described in Documentation/RCU/rculist_nulls.rst, we should insert a
new socket at the head of the list to avoid such an issue.

This issue, the swap-lookup-failure, and another variant reported in [0]
can all be handled properly by adding a locked ehash lookup suggested by
Eric Dumazet [1].

However, this issue could occur for every packet, thus more likely than
the other two races, so let's revert the change for now.

Link: https://lore.kernel.org/netdev/20230606064306.9192-1-duanmuquan@baidu.com/
Link: https://lore.kernel.org/netdev/CANn89iK8snOz8TYOhhwfimC7ykYA78GA3Nyv8x06SZYa1nKdyA@mail.gmail.com/
Fixes: 3f4ca5fafc08 ("tcp: avoid the lookup process failing to get sk in ehash table")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717215918.15723-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2023-07-19

We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 3 files changed, 55 insertions(+), 10 deletions(-).

The main changes are:

1) Fix stack depth check in presence of async callbacks,
   from Kumar Kartikeya Dwivedi.

2) Fix BTI type used for freplace attached functions,
   from Alexander Duyck.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, arm64: Fix BTI type used for freplace attached functions
  selftests/bpf: Add more tests for check_max_stack_depth bug
  bpf: Repeat check_max_stack_depth for async callbacks
  bpf: Fix subprog idx logic in check_max_stack_depth
====================

Link: https://lore.kernel.org/r/20230719174502.74023-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'fuse-update-6.5' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse fixes from Miklos Szeredi:
"Small but important fixes and a trivial cleanup"

* tag 'fuse-update-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: ioctl: translate ENOSYS in outarg
  fuse: revalidate: don't invalidate if interrupted
  fuse: Apply flags2 only when userspace set the FUSE_INIT_EXT
  fuse: remove duplicate check for nodeid
  fuse: add feature flag for expire-only

ipv4: ip_gre: fix return value check in erspan_xmit()

goto free_skb if an unexpected result is returned by pskb_tirm()
in erspan_xmit().

Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: ip_gre: fix return value check in erspan_fb_xmit()

goto err_free_skb if an unexpected result is returned by pskb_tirm()
in erspan_fb_xmit().

Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers:net: fix return value check in ocelot_fdma_receive_skb

ocelot_fdma_receive_skb should return false if an unexpected
value is returned by pskb_trim.

Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers: net: fix return value check in emac_tso_csum()

in emac_tso_csum(), return an error code if an unexpected value
is returned by pskb_trim().

Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net:ipv6: check return value of pskb_trim()

goto tx_err if an unexpected result is returned by pskb_tirm()
in ip6erspan_tunnel_xmit().

Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv4: Use kfree_sensitive instead of kfree

key might contain private part of the key, so better use
kfree_sensitive to free it.

Fixes: 38320c70d282 ("[IPSEC]: Use crypto_aead and authenc in ESP")
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-07-17 (iavf)

This series contains updates to iavf driver only.

Ding Hui fixes use-after-free issue by calling netif_napi_del() for all
allocated q_vectors. He also resolves out-of-bounds issue by not
updating to new values when timeout is encountered.

Marcin and Ahmed change the way resets are handled so that the callback
operating under the RTNL lock will wait for the reset to finish, the
rtnl_lock sensitive functions in reset flow will schedule the netdev update
for later in order to remove circular dependency with the critical lock.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: fix reset task race with iavf_remove()
  iavf: fix a deadlock caused by rtnl and driver's lock circular dependencies
  Revert "iavf: Do not restart Tx queues after reset task failure"
  Revert "iavf: Detach device during reset task"
  iavf: Wait for reset in callbacks which trigger it
  iavf: use internal state to free traffic IRQs
  iavf: Fix out-of-bounds when setting channels on remove
  iavf: Fix use-after-free in free_netdev
====================

Link: https://lore.kernel.org/r/20230717175205.3217774-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tcp-annotate-data-races-in-tcp_rsk-req'

Eric Dumazet says:

====================
tcp: annotate data-races in tcp_rsk(req)

Small series addressing two syzbot reports around tcp_rsk(req)
====================

Link: https://lore.kernel.org/r/20230717144445.653164-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around tcp_rsk(req)->ts_recent

TCP request sockets are lockless, tcp_rsk(req)->ts_recent
can change while being read by another cpu as syzbot noticed.

This is harmless, but we should annotate the known races.

Note that tcp_check_req() changes req->ts_recent a bit early,
we might change this in the future.

BUG: KCSAN: data-race in tcp_check_req / tcp_check_req

write to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 1:
tcp_check_req+0x694/0xc70 net/ipv4/tcp_minisocks.c:762
tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071
ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:468 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5493 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
do_softirq+0x7e/0xb0 kernel/softirq.c:472
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:396
local_bh_enable+0x1f/0x20 include/linux/bottom_half.h:33
rcu_read_unlock_bh include/linux/rcupdate.h:843 [inline]
__dev_queue_xmit+0xabb/0x1d10 net/core/dev.c:4271
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_hh_output include/net/neighbour.h:528 [inline]
neigh_output include/net/neighbour.h:542 [inline]
ip_finish_output2+0x700/0x840 net/ipv4/ip_output.c:229
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:317
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:431
dst_output include/net/dst.h:458 [inline]
ip_local_out net/ipv4/ip_output.c:126 [inline]
__ip_queue_xmit+0xa4d/0xa70 net/ipv4/ip_output.c:533
ip_queue_xmit+0x38/0x40 net/ipv4/ip_output.c:547
__tcp_transmit_skb+0x1194/0x16e0 net/ipv4/tcp_output.c:1399
tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline]
tcp_write_xmit+0x13ff/0x2fd0 net/ipv4/tcp_output.c:2693
__tcp_push_pending_frames+0x6a/0x1a0 net/ipv4/tcp_output.c:2877
tcp_push_pending_frames include/net/tcp.h:1952 [inline]
__tcp_sock_set_cork net/ipv4/tcp.c:3336 [inline]
tcp_sock_set_cork+0xe8/0x100 net/ipv4/tcp.c:3343
rds_tcp_xmit_path_complete+0x3b/0x40 net/rds/tcp_send.c:52
rds_send_xmit+0xf8d/0x1420 net/rds/send.c:422
rds_send_worker+0x42/0x1d0 net/rds/threads.c:200
process_one_work+0x3e6/0x750 kernel/workqueue.c:2408
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2555
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

read to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 0:
tcp_check_req+0x32a/0xc70 net/ipv4/tcp_minisocks.c:622
tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071
ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:468 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5493 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
run_ksoftirqd+0x17/0x20 kernel/softirq.c:939
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

value changed: 0x1cd237f1 -> 0x1cd237f2

Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717144445.653164-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around tcp_rsk(req)->txhash

TCP request sockets are lockless, some of their fields
can change while being read by another cpu as syzbot noticed.

This is usually harmless, but we should annotate the known
races.

This patch takes care of tcp_rsk(req)->txhash,
a separate one is needed for tcp_rsk(req)->ts_recent.

BUG: KCSAN: data-race in tcp_make_synack / tcp_rtx_synack

write to 0xffff8881362304bc of 4 bytes by task 32083 on cpu 1:
tcp_rtx_synack+0x9d/0x2a0 net/ipv4/tcp_output.c:4213
inet_rtx_syn_ack+0x38/0x80 net/ipv4/inet_connection_sock.c:880
tcp_check_req+0x379/0xc70 net/ipv4/tcp_minisocks.c:665
tcp_v6_rcv+0x125b/0x1b20 net/ipv6/tcp_ipv6.c:1673
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
netif_receive_skb_internal net/core/dev.c:5652 [inline]
netif_receive_skb+0x4a/0x310 net/core/dev.c:5711
tun_rx_batched+0x3bf/0x400
tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997
tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x4ab/0x7d0 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff8881362304bc of 4 bytes by task 32078 on cpu 0:
tcp_make_synack+0x367/0xb40 net/ipv4/tcp_output.c:3663
tcp_v6_send_synack+0x72/0x420 net/ipv6/tcp_ipv6.c:544
tcp_conn_request+0x11a8/0x1560 net/ipv4/tcp_input.c:7059
tcp_v6_conn_request+0x13f/0x180 net/ipv6/tcp_ipv6.c:1175
tcp_rcv_state_process+0x156/0x1de0 net/ipv4/tcp_input.c:6494
tcp_v6_do_rcv+0x98a/0xb70 net/ipv6/tcp_ipv6.c:1509
tcp_v6_rcv+0x17b8/0x1b20 net/ipv6/tcp_ipv6.c:1735
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
netif_receive_skb_internal net/core/dev.c:5652 [inline]
netif_receive_skb+0x4a/0x310 net/core/dev.c:5711
tun_rx_batched+0x3bf/0x400
tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997
tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x4ab/0x7d0 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x91d25731 -> 0xe79325cd

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 32078 Comm: syz-executor.4 Not tainted 6.5.0-rc1-syzkaller-00033-geb26cbb1a754 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023

Fixes: 58d607d3e52f ("tcp: provide skb->hash to synack packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717144445.653164-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-pf: mcs: Generate hash key using ecb(aes)

Hardware generated encryption and ICV tags are found to
be wrong when tested with IEEE MACSEC test vectors.
This is because as per the HRM, the hash key (derived by
AES-ECB block encryption of an all 0s block with the SAK)
has to be programmed by the software in
MCSX_RS_MCS_CPM_TX_SLAVE_SA_PLCY_MEM_4X register.
Hence fix this by generating hash key in software and
configuring in hardware.

Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/1689574603-28093-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

igc: Prevent garbled TX queue with XDP ZEROCOPY

In normal operation, each populated queue item has
next_to_watch pointing to the last TX desc of the packet,
while each cleaned item has it set to 0. In particular,
next_to_use that points to the next (necessarily clean)
item to use has next_to_watch set to 0.

When the TX queue is used both by an application using
AF_XDP with ZEROCOPY as well as a second non-XDP application
generating high traffic, the queue pointers can get in
an invalid state where next_to_use points to an item
where next_to_watch is NOT set to 0.

However, the implementation assumes at several places
that this is never the case, so if it does hold,
bad things happen. In particular, within the loop inside
of igc_clean_tx_irq(), next_to_clean can overtake next_to_use.
Finally, this prevents any further transmission via
this queue and it never gets unblocked or signaled.
Secondly, if the queue is in this garbled state,
the inner loop of igc_clean_tx_ring() will never terminate,
completely hogging a CPU core.

The reason is that igc_xdp_xmit_zc() reads next_to_use
before acquiring the lock, and writing it back
(potentially unmodified) later. If it got modified
before locking, the outdated next_to_use is written
pointing to an item that was already used elsewhere
(and thus next_to_watch got written).

Fixes: 9acf59a752d4 ("igc: Enable TX via AF_XDP zero-copy")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230717175444.3217831-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-fixes-for-6.5-20230717' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2023-07-17

The 1st patch is by Ziyang Xuan and fixes a possible memory leak in
the receiver handling in the CAN RAW protocol.

YueHaibing contributes a use after free in bcm_proc_show() of the
Broad Cast Manager (BCM) CAN protocol.

The next 2 patches are by me and fix a possible null pointer
dereference in the RX path of the gs_usb driver with activated
hardware timestamps and the candlelight firmware.

The last patch is by Fedor Ross, Marek Vasut and me and targets the
mcp251xfd driver. The polling timeout of __mcp251xfd_chip_set_mode()
is increased to fix bus joining on busy CAN buses and very low bit
rate.

* tag 'linux-can-fixes-for-6.5-20230717' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout
  can: gs_usb: fix time stamp counter initialization
  can: gs_usb: gs_can_open(): improve error handling
  can: bcm: Fix UAF in bcm_proc_show()
  can: raw: fix receiver memory leak
====================

Link: https://lore.kernel.org/r/20230717180938.230816-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mailmap: Add entry for old intel email

Fix old email to avoid bouncing email from net/drivers and older
netdev work. Anyways my @intel email hasn't been active for years.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230717173306.38407-1-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mailmap: add entries for past lives

Update old emails for my current work email.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230717193242.43670-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'selftests-tc-increase-timeout-and-add-missing-kconfig'

Matthieu Baerts says:

====================
selftests: tc: increase timeout and add missing kconfig

When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:

not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds

I also noticed most of the tests were skipped because the "teardown
stage" did not complete successfully. It was due to missing kconfig.

These patches fix these two errors plus an extra one because this
selftest reads info from "/proc/net/nf_conntrack". Thank you Pedro for
having helped me fixing these issues [2].

Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/
====================

Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-0-1eb4fd3a96e7@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: tc: add ConnTrack procfs kconfig

When looking at the TC selftest reports, I noticed one test was failing
because /proc/net/nf_conntrack was not available.

  not ok 373 3992 - Add ct action triggering DNAT tuple conflict
   Could not match regex pattern. Verify command output:
  cat: /proc/net/nf_conntrack: No such file or directory

It is only available if NF_CONNTRACK_PROCFS kconfig is set. So the issue
can be fixed simply by adding it to the list of required kconfig.

Fixes: e46905641316 ("tc-testing: add test for ct DNAT tuple collision")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-3-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: tc: add 'ct' action kconfig dep

When looking for something else in LKFT reports [1], I noticed most of
the tests were skipped because the "teardown stage" did not complete
successfully.

Pedro found out this is due to the fact CONFIG_NF_FLOW_TABLE is required
but not listed in the 'config' file. Adding it to the list fixes the
issues on LKFT side. CONFIG_NET_ACT_CT is now set to 'm' in the final
kconfig.

Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/
Suggested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-2-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: tc: set timeout to 15 minutes

When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:

not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds

The timeout had been introduced 3 years ago, see the Fixes commit below.

This timeout is only in place when executing the selftests via the
kselftests runner scripts. I guess this is not what most TC devs are
using and nobody noticed the issue before.

The new timeout is set to 15 minutes as suggested by Pedro [2]. It looks
like it is plenty more time than what it takes in "normal" conditions.

Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/
Suggested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-1-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bpf, arm64: Fix BTI type used for freplace attached functions

When running an freplace attached bpf program on an arm64 system w were
seeing the following issue:
Unhandled 64-bit el1h sync exception on CPU47, ESR 0x0000000036000003 -- BTI

After a bit of work to track it down I determined that what appeared to be
happening is that the 'bti c' at the start of the program was somehow being
reached after a 'br' instruction. Further digging pointed me toward the
fact that the function was attached via freplace. This in turn led me to
build_plt which I believe is invoking the long jump which is triggering
this error.

To resolve it we can replace the 'bti c' with 'bti jc' and add a comment
explaining why this has to be modified as such.

Fixes: b2ad54e1533e ("bpf, arm64: Implement bpf_arch_text_poke() for arm64")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/168926677665.316237.9953845318337455525.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge branch 'two-more-fixes-for-check_max_stack_depth'

Kumar Kartikeya Dwivedi says:

====================
Two more fixes for check_max_stack_depth

I noticed two more bugs while reviewing the code, description and
examples available in the patches.

One leads to incorrect subprog index to be stored in the frame stack
maintained by the function (leading to incorrect tail_call_reachable
marks, among other things).

The other problem is missing exploration pass of other async callbacks
when they are not called from the main prog. Call chains rooted at them
can thus bypass the stack limits (32 call frames * max permitted stack
depth per function).

Changelog:
----------
v1 -> v2
v1: https://lore.kernel.org/bpf/20230713003118.1327943-1-memxor@gmail.com

* Fix commit message for patch 2 (Alexei)
====================

Link: https://lore.kernel.org/r/20230717161530.1238-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: Add more tests for check_max_stack_depth bug

Another test which now exercies the path of the verifier where it will
explore call chains rooted at the async callback. Without the prior
fixes, this program loads successfully, which is incorrect.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Repeat check_max_stack_depth for async callbacks

While the check_max_stack_depth function explores call chains emanating
from the main prog, which is typically enough to cover all possible call
chains, it doesn't explore those rooted at async callbacks unless the
async callback will have been directly called, since unlike non-async
callbacks it skips their instruction exploration as they don't
contribute to stack depth.

It could be the case that the async callback leads to a callchain which
exceeds the stack depth, but this is never reachable while only
exploring the entry point from main subprog. Hence, repeat the check for
the main subprog *and* all async callbacks marked by the symbolic
execution pass of the verifier, as execution of the program may begin at
any of them.

Consider functions with following stack depths:
main: 256
async: 256
foo: 256

main:
    rX = async
    bpf_timer_set_callback(...)

async:
    foo()

Here, async is not descended as it does not contribute to stack depth of
main (since it is referenced using bpf_pseudo_func and not
bpf_pseudo_call). However, when async is invoked asynchronously, it will
end up breaching the MAX_BPF_STACK limit by calling foo.

Hence, in addition to main, we also need to explore call chains
beginning at all async callback subprogs in a program.

Fixes: 7ddc80a476c2 ("bpf: Teach stack depth check about async callbacks.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Fix subprog idx logic in check_max_stack_depth

The assignment to idx in check_max_stack_depth happens once we see a
bpf_pseudo_call or bpf_pseudo_func. This is not an issue as the rest of
the code performs a few checks and then pushes the frame to the frame
stack, except the case of async callbacks. If the async callback case
causes the loop iteration to be skipped, the idx assignment will be
incorrect on the next iteration of the loop. The value stored in the
frame stack (as the subprogno of the current subprog) will be incorrect.

This leads to incorrect checks and incorrect tail_call_reachable
marking. Save the target subprog in a new variable and only assign to
idx once we are done with the is_async_cb check which may skip pushing
of frame to the frame stack and subsequent stack depth checks and tail
call markings.

Fixes: 7ddc80a476c2 ("bpf: Teach stack depth check about async callbacks.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge tag 'perf-tools-fixes-for-v6.5-1-2023-07-18' of git://git./linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Don't group events when computing metrics that require more than the
   maximum number of simultaneously enabled events on AMD systems.

- Fix multi CU handling in 'perf probe', add a 'perf test' entry to
   regress test it.

- Make the 'perf test task_exit' stop generating samples by using the
   'dummy' event, all it is testing is if a PERF_RECORD_EXIT is
   generated at the end of a perf session. This makes this perf test to
   stop sometimes failing on some systems due to a full ring buffer.

- Avoid SEGV if PMU lookup fails for legacy cache terms.

- Fix libsubcmd SEGV/use-after-free when commands aren't excluded.

- Fix OpenCSD (ARM64's CoreSight hardware tracing) library path
   resolution when specifying CSLIBS= in the make command line.

- Fix broken feature check for libtracefs due to external lib changes,
   use the provided pkgconfig file instead future proof it.

- Sync drm, fcntl, kvm, mount, prctl, socket, vhost, asound, arm64's
   cputype headers with the kernel sources, in some cases this made the
   tools become aware of new kernel APIs such as ioctls and the
   cachestat sysctl.

* tag 'perf-tools-fixes-for-v6.5-1-2023-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf test task_exit: No need for a cycles event to check if we get an PERF_RECORD_EXIT
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  tools include UAPI: Sync the sound/asound.h copy with the kernel sources
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  perf beauty: Update copy of linux/socket.h with the kernel sources
  perf parse-events: Avoid SEGV if PMU lookup fails for legacy cache terms
  libsubcmd: Avoid SEGV/use-after-free when commands aren't excluded
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  perf build: Fix broken feature check for libtracefs due to external lib changes
  tools include UAPI: Sync linux/mount.h copy with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers uapi: Sync linux/fcntl.h with the kernel sources
  perf vendor events amd: Fix large metrics
  perf build: Fix library not found error when using CSLIBS
  tools headers UAPI: Sync files changed by new cachestat syscall with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  perf probe: Read DWARF files from the correct CU
  perf probe: Add test for regression introduced by switch to die_get_decl_file()

Merge tag 'mm-hotfixes-stable-2023-07-18-12-28' of git://git./linux/kernel/git/akpm/mm

Pull hotfixes from Andrew Morton:
"Seven hotfixes, six of which are cc:stable and one of which addresses
  a post-6.5 issue"

* tag 'mm-hotfixes-stable-2023-07-18-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  maple_tree: fix node allocation testing on 32 bit
  maple_tree: fix 32 bit mas_next testing
  selftests/mm: mkdirty: fix incorrect position of #endif
  maple_tree: set the node limit when creating a new root node
  mm/mlock: fix vma iterator conversion of apply_vma_lock_flags()
  prctl: move PR_GET_AUXV out of PR_MCE_KILL
  selftests/mm: give scripts execute permission

Merge tag 'linux-kselftest-fixes-6.5-rc3' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
"Fixes to bugs that are interfering with arm64 and risc workflows. Also
  two fixes to timer and mincore tests that are causing test failures"

* tag 'linux-kselftest-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/arm64: fix build failure during the "emit_tests" step
  selftests/riscv: fix potential build failure during the "emit_tests" step
  tools: timers: fix freq average calculation
  selftests/mincore: fix skip condition for check_huge_pages test

Merge tag 'tpmdd-v6.5-rc3' of git://git./linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen.

Mostly interrupt storm fixes, with some other minor changes.

* tag 'tpmdd-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs
  tpm/tpm_tis: Disable interrupts for Lenovo L590 devices
  tpm: Do not remap from ACPI resources again for Pluton TPM
  tpm/tpm_tis: Disable interrupts for Framework Laptop Intel 13th gen
  tpm/tpm_tis: Disable interrupts for Framework Laptop Intel 12th gen
  security: keys: Modify mismatched function name
  tpm: return false from tpm_amd_is_rng_defective on non-x86 platforms
  keys: Fix linking a duplicate key to a keyring's assoc_array
  tpm: tis_i2c: Limit write bursts to I2C_SMBUS_BLOCK_MAX (32) bytes
  tpm: tis_i2c: Limit read bursts to I2C_SMBUS_BLOCK_MAX (32) bytes
  tpm_tis_spi: Release chip select when flow control fails
  tpm: tpm_tis: Disable interrupts *only* for AEON UPX-i11
  tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation

octeontx2-pf: Dont allocate BPIDs for LBK interfaces

Current driver enables backpressure for LBK interfaces.
But these interfaces do not support this feature.
Hence, this patch fixes the issue by skipping the
backpressure configuration for these interfaces.

Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20230716093741.28063-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

vrf: Fix lockdep splat in output path

Cited commit converted the neighbour code to use the standard RCU
variant instead of the RCU-bh variant, but the VRF code still uses
rcu_read_lock_bh() / rcu_read_unlock_bh() around the neighbour lookup
code in its IPv4 and IPv6 output paths, resulting in lockdep splats
[1][2]. Can be reproduced using [3].

Fix by switching to rcu_read_lock() / rcu_read_unlock().

[1]
=============================
WARNING: suspicious RCU usage
6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted
-----------------------------
include/net/neighbour.h:302 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ping/183:
#0: ffff888105ea1d80 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xc6c/0x33c0
#1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output+0x2e3/0x2030

stack backtrace:
CPU: 0 PID: 183 Comm: ping Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc1/0xf0
lockdep_rcu_suspicious+0x211/0x3b0
vrf_output+0x1380/0x2030
ip_push_pending_frames+0x125/0x2a0
raw_sendmsg+0x200d/0x33c0
inet_sendmsg+0xa2/0xe0
__sys_sendto+0x2aa/0x420
__x64_sys_sendto+0xe5/0x1c0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

[2]
=============================
WARNING: suspicious RCU usage
6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted
-----------------------------
include/net/neighbour.h:302 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ping6/182:
#0: ffff888114b63000 (sk_lock-AF_INET6){+.+.}-{0:0}, at: rawv6_sendmsg+0x1602/0x3e50
#1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output6+0xe9/0x1310

stack backtrace:
CPU: 0 PID: 182 Comm: ping6 Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc1/0xf0
lockdep_rcu_suspicious+0x211/0x3b0
vrf_output6+0xd32/0x1310
ip6_local_out+0xb4/0x1a0
ip6_send_skb+0xbc/0x340
ip6_push_pending_frames+0xe5/0x110
rawv6_sendmsg+0x2e6e/0x3e50
inet_sendmsg+0xa2/0xe0
__sys_sendto+0x2aa/0x420
__x64_sys_sendto+0xe5/0x1c0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

[3]
#!/bin/bash

ip link add name vrf-red up numtxqueues 2 type vrf table 10
ip link add name swp1 up master vrf-red type dummy
ip address add 192.0.2.1/24 dev swp1
ip address add 2001:db8:1::1/64 dev swp1
ip neigh add 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm dev swp1
ip neigh add 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm dev swp1
ip vrf exec vrf-red ping 192.0.2.2 -c 1 &> /dev/null
ip vrf exec vrf-red ping6 2001:db8:1::2 -c 1 &> /dev/null

Fixes: 09eed1192cec ("neighbour: switch to standard rcu, instead of rcu_bh")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/netdev/CA+G9fYtEr-=GbcXNDYo3XOkwR+uYgehVoDjsP0pFLUpZ_AZcyg@mail.gmail.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230715153605.4068066-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-07-14 (ice)

This series contains updates to ice driver only.

Petr Oros removes multiple calls made to unregister netdev and
devlink_port.

Michal fixes null pointer dereference that can occur during reload.
====================

Link: https://lore.kernel.org/r/20230714201041.1717834-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

btrfs: fix warning when putting transaction with qgroups enabled after abort

If we have a transaction abort with qgroups enabled we get a warning
triggered when doing the final put on the transaction, like this:

  [552.6789] ------------[ cut here ]------------
  [552.6815] WARNING: CPU: 4 PID: 81745 at fs/btrfs/transaction.c:144 btrfs_put_transaction+0x123/0x130 [btrfs]
  [552.6817] Modules linked in: btrfs blake2b_generic xor (...)
  [552.6819] CPU: 4 PID: 81745 Comm: btrfs-transacti Tainted: G        W          6.4.0-rc6-btrfs-next-134+ #1
  [552.6819] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
  [552.6819] RIP: 0010:btrfs_put_transaction+0x123/0x130 [btrfs]
  [552.6821] Code: bd a0 01 00 (...)
  [552.6821] RSP: 0018:ffffa168c0527e28 EFLAGS: 00010286
  [552.6821] RAX: ffff936042caed00 RBX: ffff93604a3eb448 RCX: 0000000000000000
  [552.6821] RDX: ffff93606421b028 RSI: ffffffff92ff0878 RDI: ffff93606421b010
  [552.6821] RBP: ffff93606421b000 R08: 0000000000000000 R09: ffffa168c0d07c20
  [552.6821] R10: 0000000000000000 R11: ffff93608dc52950 R12: ffffa168c0527e70
  [552.6821] R13: ffff93606421b000 R14: ffff93604a3eb420 R15: ffff93606421b028
  [552.6821] FS:  0000000000000000(0000) GS:ffff93675fb00000(0000) knlGS:0000000000000000
  [552.6821] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [552.6821] CR2: 0000558ad262b000 CR3: 000000014feda005 CR4: 0000000000370ee0
  [552.6822] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [552.6822] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [552.6822] Call Trace:
  [552.6822]  <TASK>
  [552.6822]  ? __warn+0x80/0x130
  [552.6822]  ? btrfs_put_transaction+0x123/0x130 [btrfs]
  [552.6824]  ? report_bug+0x1f4/0x200
  [552.6824]  ? handle_bug+0x42/0x70
  [552.6824]  ? exc_invalid_op+0x14/0x70
  [552.6824]  ? asm_exc_invalid_op+0x16/0x20
  [552.6824]  ? btrfs_put_transaction+0x123/0x130 [btrfs]
  [552.6826]  btrfs_cleanup_transaction+0xe7/0x5e0 [btrfs]
  [552.6828]  ? _raw_spin_unlock_irqrestore+0x23/0x40
  [552.6828]  ? try_to_wake_up+0x94/0x5e0
  [552.6828]  ? __pfx_process_timeout+0x10/0x10
  [552.6828]  transaction_kthread+0x103/0x1d0 [btrfs]
  [552.6830]  ? __pfx_transaction_kthread+0x10/0x10 [btrfs]
  [552.6832]  kthread+0xee/0x120
  [552.6832]  ? __pfx_kthread+0x10/0x10
  [552.6832]  ret_from_fork+0x29/0x50
  [552.6832]  </TASK>
  [552.6832] ---[ end trace 0000000000000000 ]---

This corresponds to this line of code:

  void btrfs_put_transaction(struct btrfs_transaction *transaction)
  {
      (...)
          WARN_ON(!RB_EMPTY_ROOT(
                          &transaction->delayed_refs.dirty_extent_root));
      (...)
  }

The warning happens because btrfs_qgroup_destroy_extent_records(), called
in the transaction abort path, we free all entries from the rbtree
"dirty_extent_root" with rbtree_postorder_for_each_entry_safe(), but we
don't actually empty the rbtree - it's still pointing to nodes that were
freed.

So set the rbtree's root node to NULL to avoid this warning (assign
RB_ROOT).

Fixes: 81f7eb00ff5b ("btrfs: destroy qgroup extent records on transaction abort")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix ordered extent split error handling in btrfs_dio_submit_io

When the call to btrfs_extract_ordered_extent in btrfs_dio_submit_io
fails to allocate memory for a new ordered_extent, it calls into the
btrfs_dio_end_io for error handling. btrfs_dio_end_io then assumes that
bbio->ordered is set because it is supposed to be at this point, except
for this error handling corner case. Try to not overload the
btrfs_dio_end_io with error handling of a bio in a non-canonical state,
and instead call btrfs_finish_ordered_extent and iomap_dio_bio_end_io
directly for this error case.

Reported-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Fixes: b41b6f6937dc ("btrfs: use btrfs_finish_ordered_extent to complete direct writes")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand

While trying to get the subpage blocksize tests running, I hit the
following panic on generic/476

  assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
  kernel BUG at fs/btrfs/subpage.c:229!
  Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
  CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12
  Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023
  pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
  pc : btrfs_subpage_assert+0xbc/0xf0
  lr : btrfs_subpage_assert+0xbc/0xf0
  Call trace:
   btrfs_subpage_assert+0xbc/0xf0
   btrfs_subpage_clear_checked+0x38/0xc0
   btrfs_page_clear_checked+0x48/0x98
   btrfs_truncate_block+0x5d0/0x6a8
   btrfs_cont_expand+0x5c/0x528
   btrfs_write_check.isra.0+0xf8/0x150
   btrfs_buffered_write+0xb4/0x760
   btrfs_do_write_iter+0x2f8/0x4b0
   btrfs_file_write_iter+0x1c/0x30
   do_iter_readv_writev+0xc8/0x158
   do_iter_write+0x9c/0x210
   vfs_iter_write+0x24/0x40
   iter_file_splice_write+0x224/0x390
   direct_splice_actor+0x38/0x68
   splice_direct_to_actor+0x12c/0x260
   do_splice_direct+0x90/0xe8
   generic_copy_file_range+0x50/0x90
   vfs_copy_file_range+0x29c/0x470
   __arm64_sys_copy_file_range+0xcc/0x498
   invoke_syscall.constprop.0+0x80/0xd8
   do_el0_svc+0x6c/0x168
   el0_svc+0x50/0x1b0
   el0t_64_sync_handler+0x114/0x120
   el0t_64_sync+0x194/0x198

This happens because during btrfs_cont_expand we'll get a page, set it
as mapped, and if it's not Uptodate we'll read it.  However between the
read and re-locking the page we could have called release_folio() on the
page, but left the page in the file mapping.  release_folio() can clear
the page private, and thus further down we blow up when we go to modify
the subpage bits.

Fix this by putting the set_page_extent_mapped() after the read.  This
is safe because read_folio() will call set_page_extent_mapped() before
it does the read, and then if we clear page private but leave it on the
mapping we're completely safe re-setting set_page_extent_mapped().  With
this patch I can now run generic/476 without panicing.

CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: raid56: always verify the P/Q contents for scrub

[REGRESSION]
Commit 75b470332965 ("btrfs: raid56: migrate recovery and scrub recovery
path to use error_bitmap") changed the behavior of scrub_rbio().

Initially if we have no error reading the raid bio, we will assign
@need_check to true, then finish_parity_scrub() would later verify the
content of P/Q stripes before writeback.

But after that commit we never verify the content of P/Q stripes and
just writeback them.

This can lead to unrepaired P/Q stripes during scrub, or already
corrupted P/Q copied to the dev-replace target.

[FIX]
The situation is more complex than the regression, in fact the initial
behavior is not 100% correct either.

If we have the following rare case, it can still lead to the same
problem using the old behavior:

0 16K 32K 48K 64K
Data 1: |IIIIIII| |
Data 2: | |
Parity: | |CCCCCCC| |

Where "I" means IO error, "C" means corruption.

In the above case, we're scrubbing the parity stripe, then read out all
the contents of Data 1, Data 2, Parity stripes.

But found IO error in Data 1, which leads to rebuild using Data 2 and
Parity and got the correct data.

In that case, we would not verify if the Parity is correct for range
[16K, 32K).

So here we have to always verify the content of Parity no matter if we
did recovery or not.

This patch would remove the @need_check parameter of
finish_parity_scrub() completely, and would always do the P/Q
verification before writeback.

Fixes: 75b470332965 ("btrfs: raid56: migrate recovery and scrub recovery path to use error_bitmap")
CC: stable@vger.kernel.org # 6.2+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use irq safe locking when running and adding delayed iputs

Running delayed iputs, which never happens in an irq context, needs to
lock the spinlock fs_info->delayed_iput_lock. When finishing bios for
data writes (irq context, bio.c) we call btrfs_put_ordered_extent() which
needs to add a delayed iput and for that it needs to acquire the spinlock
fs_info->delayed_iput_lock. Without disabling irqs when running delayed
iputs we can therefore deadlock on that spinlock. The same deadlock can
also happen when adding an inode to the delayed iputs list, since this
can be done outside an irq context as well.

Syzbot recently reported this, which results in the following trace:

  ================================
  WARNING: inconsistent lock state
  6.4.0-syzkaller-09904-ga507db1d8fdc #0 Not tainted
  --------------------------------
  inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
  btrfs-cleaner/16079 [HC0[0]:SC0[0]:HE1:SE1] takes:
  ffff888107804d20 (&fs_info->delayed_iput_lock){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline]
  ffff888107804d20 (&fs_info->delayed_iput_lock){+.?.}-{2:2}, at: btrfs_run_delayed_iputs+0x28/0xe0 fs/btrfs/inode.c:3523
  {IN-SOFTIRQ-W} state was registered at:
    lock_acquire kernel/locking/lockdep.c:5761 [inline]
    lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5726
    __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
    _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
    spin_lock include/linux/spinlock.h:350 [inline]
    btrfs_add_delayed_iput+0x128/0x390 fs/btrfs/inode.c:3490
    btrfs_put_ordered_extent fs/btrfs/ordered-data.c:559 [inline]
    btrfs_put_ordered_extent+0x2f6/0x610 fs/btrfs/ordered-data.c:547
    __btrfs_bio_end_io fs/btrfs/bio.c:118 [inline]
    __btrfs_bio_end_io+0x136/0x180 fs/btrfs/bio.c:112
    btrfs_orig_bbio_end_io+0x86/0x2b0 fs/btrfs/bio.c:163
    btrfs_simple_end_io+0x105/0x380 fs/btrfs/bio.c:378
    bio_endio+0x589/0x690 block/bio.c:1617
    req_bio_endio block/blk-mq.c:766 [inline]
    blk_update_request+0x5c5/0x1620 block/blk-mq.c:911
    blk_mq_end_request+0x59/0x680 block/blk-mq.c:1032
    lo_complete_rq+0x1c6/0x280 drivers/block/loop.c:370
    blk_complete_reqs+0xb3/0xf0 block/blk-mq.c:1110
    __do_softirq+0x1d4/0x905 kernel/softirq.c:553
    run_ksoftirqd kernel/softirq.c:921 [inline]
    run_ksoftirqd+0x31/0x60 kernel/softirq.c:913
    smpboot_thread_fn+0x659/0x9e0 kernel/smpboot.c:164
    kthread+0x344/0x440 kernel/kthread.c:389
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
  irq event stamp: 39
  hardirqs last  enabled at (39): [<ffffffff81d5ebc4>] __do_kmem_cache_free mm/slab.c:3558 [inline]
  hardirqs last  enabled at (39): [<ffffffff81d5ebc4>] kmem_cache_free mm/slab.c:3582 [inline]
  hardirqs last  enabled at (39): [<ffffffff81d5ebc4>] kmem_cache_free+0x244/0x370 mm/slab.c:3575
  hardirqs last disabled at (38): [<ffffffff81d5eb5e>] __do_kmem_cache_free mm/slab.c:3553 [inline]
  hardirqs last disabled at (38): [<ffffffff81d5eb5e>] kmem_cache_free mm/slab.c:3582 [inline]
  hardirqs last disabled at (38): [<ffffffff81d5eb5e>] kmem_cache_free+0x1de/0x370 mm/slab.c:3575
  softirqs last  enabled at (0): [<ffffffff814ac99f>] copy_process+0x227f/0x75c0 kernel/fork.c:2448
  softirqs last disabled at (0): [<0000000000000000>] 0x0

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(&fs_info->delayed_iput_lock);
    <Interrupt>
      lock(&fs_info->delayed_iput_lock);

   *** DEADLOCK ***

  1 lock held by btrfs-cleaner/16079:
   #0: ffff888107804860 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: cleaner_kthread+0x103/0x4b0 fs/btrfs/disk-io.c:1463

  stack backtrace:
  CPU: 3 PID: 16079 Comm: btrfs-cleaner Not tainted 6.4.0-syzkaller-09904-ga507db1d8fdc #0
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
  Call Trace:
   <TASK>
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
   print_usage_bug kernel/locking/lockdep.c:3978 [inline]
   valid_state kernel/locking/lockdep.c:4020 [inline]
   mark_lock_irq kernel/locking/lockdep.c:4223 [inline]
   mark_lock.part.0+0x1102/0x1960 kernel/locking/lockdep.c:4685
   mark_lock kernel/locking/lockdep.c:4649 [inline]
   mark_usage kernel/locking/lockdep.c:4598 [inline]
   __lock_acquire+0x8e4/0x5e20 kernel/locking/lockdep.c:5098
   lock_acquire kernel/locking/lockdep.c:5761 [inline]
   lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5726
   __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
   _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
   spin_lock include/linux/spinlock.h:350 [inline]
   btrfs_run_delayed_iputs+0x28/0xe0 fs/btrfs/inode.c:3523
   cleaner_kthread+0x2e5/0x4b0 fs/btrfs/disk-io.c:1478
   kthread+0x344/0x440 kernel/kthread.c:389
   ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
   </TASK>

So fix this by using spin_lock_irq() and spin_unlock_irq() when running
delayed iputs, and using spin_lock_irqsave() and spin_unlock_irqrestore()
when adding a delayed iput().

Reported-by: syzbot+da501a04be5ff533b102@syzkaller.appspotmail.com
Fixes: ec63b84d4611 ("btrfs: add an ordered_extent pointer to struct btrfs_bio")
Link: https://lore.kernel.org/linux-btrfs/000000000000d5c89a05ffbd39dd@google.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix iput() on error pointer after error during orphan cleanup

At btrfs_orphan_cleanup(), if we can't find an inode (btrfs_iget() returns
an -ENOENT error pointer), we proceed with 'ret' set to -ENOENT and the
inode pointer set to ERR_PTR(-ENOENT). Later when we proceed to the body
of the following if statement:

    if (ret == -ENOENT || inode->i_nlink) {
        (...)
        trans = btrfs_start_transaction(root, 1);
        if (IS_ERR(trans)) {
            ret = PTR_ERR(trans);
            iput(inode);
            goto out;
        }
        (...)
        ret = btrfs_del_orphan_item(trans, root,
                                    found_key.objectid);
        btrfs_end_transaction(trans);
        if (ret) {
            iput(inode);
            goto out;
        }
        continue;
    }

If we get an error from btrfs_start_transaction() or from the call to
btrfs_del_orphan_item() we end calling iput() against an inode pointer
that has a value of ERR_PTR(-ENOENT), resulting in a crash with the
following trace:

  [876.667] BUG: kernel NULL pointer dereference, address: 0000000000000096
  [876.667] #PF: supervisor read access in kernel mode
  [876.667] #PF: error_code(0x0000) - not-present page
  [876.667] PGD 0 P4D 0
  [876.668] Oops: 0000 [#1] PREEMPT SMP PTI
  [876.668] CPU: 0 PID: 2356187 Comm: mount Tainted: G        W          6.4.0-rc6-btrfs-next-134+ #1
  [876.668] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
  [876.668] RIP: 0010:iput+0xa/0x20
  [876.668] Code: ff ff ff 66 (...)
  [876.669] RSP: 0018:ffffafa9c0c9f9d0 EFLAGS: 00010282
  [876.669] RAX: ffffffffffffffe4 RBX: 000000000009453b RCX: 0000000000000000
  [876.669] RDX: 0000000000000001 RSI: ffffafa9c0c9f930 RDI: fffffffffffffffe
  [876.669] RBP: ffff95c612f3b800 R08: 0000000000000001 R09: ffffffffffffffe4
  [876.670] R10: 00018f2a71010000 R11: 000000000ead96e3 R12: ffff95cb7d6909a0
  [876.670] R13: fffffffffffffffe R14: ffff95c60f477000 R15: 00000000ffffffe4
  [876.670] FS:  00007f5fbe30a840(0000) GS:ffff95ccdfa00000(0000) knlGS:0000000000000000
  [876.670] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [876.671] CR2: 0000000000000096 CR3: 000000055e9f6004 CR4: 0000000000370ef0
  [876.671] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [876.671] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [876.672] Call Trace:
  [876.744]  <TASK>
  [876.744]  ? __die_body+0x1b/0x60
  [876.744]  ? page_fault_oops+0x15d/0x450
  [876.745]  ? __kmem_cache_alloc_node+0x47/0x410
  [876.745]  ? do_user_addr_fault+0x65/0x8a0
  [876.745]  ? exc_page_fault+0x74/0x170
  [876.746]  ? asm_exc_page_fault+0x22/0x30
  [876.746]  ? iput+0xa/0x20
  [876.746]  btrfs_orphan_cleanup+0x221/0x330 [btrfs]
  [876.746]  btrfs_lookup_dentry+0x58f/0x5f0 [btrfs]
  [876.747]  btrfs_lookup+0xe/0x30 [btrfs]
  [876.747]  __lookup_slow+0x82/0x130
  [876.785]  walk_component+0xe5/0x160
  [876.786]  path_lookupat.isra.0+0x6e/0x150
  [876.786]  filename_lookup+0xcf/0x1a0
  [876.786]  ? mod_objcg_state+0xd2/0x360
  [876.786]  ? obj_cgroup_charge+0xf5/0x110
  [876.787]  ? should_failslab+0xa/0x20
  [876.787]  ? kmem_cache_alloc+0x47/0x450
  [876.787]  vfs_path_lookup+0x51/0x90
  [876.788]  mount_subtree+0x8d/0x130
  [876.788]  btrfs_mount+0x149/0x410 [btrfs]
  [876.788]  ? __kmem_cache_alloc_node+0x47/0x410
  [876.788]  ? vfs_parse_fs_param+0xc0/0x110
  [876.789]  legacy_get_tree+0x24/0x50
  [876.834]  vfs_get_tree+0x22/0xd0
  [876.852]  path_mount+0x2d8/0x9c0
  [876.852]  do_mount+0x79/0x90
  [876.852]  __x64_sys_mount+0x8e/0xd0
  [876.853]  do_syscall_64+0x38/0x90
  [876.899]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
  [876.958] RIP: 0033:0x7f5fbe50b76a
  [876.959] Code: 48 8b 0d a9 (...)
  [876.959] RSP: 002b:00007fff01925798 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  [876.959] RAX: ffffffffffffffda RBX: 00007f5fbe694264 RCX: 00007f5fbe50b76a
  [876.960] RDX: 0000561bde6c8720 RSI: 0000561bde6bdec0 RDI: 0000561bde6c31a0
  [876.960] RBP: 0000561bde6bdc70 R08: 0000000000000000 R09: 0000000000000001
  [876.960] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  [876.960] R13: 0000561bde6c31a0 R14: 0000561bde6c8720 R15: 0000561bde6bdc70
  [876.960]  </TASK>

So fix this by setting 'inode' to NULL whenever we get an error from
btrfs_iget(), and to make the code simpler, stop testing for 'ret' being
-ENOENT to check if we have an inode - instead test for 'inode' being NULL
or not. Having a NULL 'inode' prevents any iput() call from crashing, as
iput() ignores NULL inode pointers. Also, stop testing for a NULL return
value from btrfs_iget() with PTR_ERR_OR_ZERO(), because btrfs_iget() never
returns NULL - in case an inode is not found, it returns ERR_PTR(-ENOENT),
and in case of memory allocation failure, it returns ERR_PTR(-ENOMEM).
We also don't need the extra iput() calls on the error branches for the
btrfs_start_transaction() and btrfs_del_orphan_item() calls, as we have
already called iput() before, so remove them.

Fixes: a13bb2c03848 ("btrfs: add missing iputs on orphan cleanup failure")
CC: stable@vger.kernel.org # 6.4
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix double iput() on inode after an error during orphan cleanup

At btrfs_orphan_cleanup(), if we were able to find the inode, we do an
iput() on the inode, then if btrfs_drop_verity_items() succeeds and then
either btrfs_start_transaction() or btrfs_del_orphan_item() fail, we do
another iput() in the respective error paths, resulting in an extra iput()
on the inode.

Fix this by setting inode to NULL after the first iput(), as iput()
ignores a NULL inode pointer argument.

Fixes: a13bb2c03848 ("btrfs: add missing iputs on orphan cleanup failure")
CC: stable@vger.kernel.org # 6.4
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: zoned: fix memory leak after finding block group with super blocks

At exclude_super_stripes(), if we happen to find a block group that has
super blocks mapped to it and we are on a zoned filesystem, we error out
as this is not supposed to happen, indicating either a bug or maybe some
memory corruption for example. However we are exiting the function without
freeing the memory allocated for the logical address of the super blocks.
Fix this by freeing the logical address.

Fixes: 12659251ca5d ("btrfs: implement log-structured superblock for ZONED mode")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

maple_tree: fix node allocation testing on 32 bit

Internal node counting was altered and the 64 bit test was updated,
however the 32bit test was missed.

Restore the 32bit test to a functional state.

Link: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230712173916.168805-2-Liam.Howlett@oracle.com
Fixes: 541e06b772c1 ("maple_tree: remove GFP_ZERO from kmem_cache_alloc() and kmem_cache_alloc_bulk()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: fix 32 bit mas_next testing

The test setup of mas_next is dependent on node entry size to create a 2
level tree, but the tests did not account for this in the expected value
when shifting beyond the scope of the tree.

Fix this by setting up the test to succeed depending on the node entries
which is dependent on the 32/64 bit setup.

Link: https://lkml.kernel.org/r/20230712173916.168805-1-Liam.Howlett@oracle.com
Fixes: 120b116208a0 ("maple_tree: reorganize testing to restore module testing")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: mkdirty: fix incorrect position of #endif

The #endif is the wrong side of a } causing a build failure when
__NR_userfaultfd is not defined. Fix this by moving the #end to enclose
the }

Link: https://lkml.kernel.org/r/20230712134648.456349-1-colin.i.king@gmail.com
Fixes: 9eac40fc0cc7 ("selftests/mm: mkdirty: test behavior of (pte|pmd)_mkdirty on VMAs without write permissions")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: set the node limit when creating a new root node

Set the node limit of the root node so that the last pivot of all nodes is
the node limit (if the node is not full).

This patch also fixes a bug in mas_rev_awalk(). Effectively, always
setting a maximum makes mas_logical_pivot() behave as mas_safe_pivot().
Without this fix, it is possible that very small tasks would fail to find
the correct gap. Although this has not been observed with real tasks, it
has been reported to happen in m68k nommu running the maple tree tests.

Link: https://lkml.kernel.org/r/20230711035444.526-1-zhangpeng.00@bytedance.com
Link: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230711035444.526-2-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mlock: fix vma iterator conversion of apply_vma_lock_flags()

apply_vma_lock_flags() calls mlock_fixup(), which could merge the VMA
after where the vma iterator is located.  Although this is not an issue,
the next iteration of the loop will check the start of the vma to be equal
to the locally saved 'tmp' variable and cause an incorrect failure
scenario.  Fix the error by setting tmp to the end of the vma iterator
value before restarting the loop.

There is also a potential of the error code being overwritten when the
loop terminates early.  Fix the return issue by directly returning when an
error is encountered since there is nothing to undo after the loop.

Link: https://lkml.kernel.org/r/20230711175020.4091336-1-Liam.Howlett@oracle.com
Fixes: 37598f5a9d8b ("mlock: convert mlock to vma iterator")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/linux-mm/50341ca1-d582-b33a-e3d0-acb08a65166f@arm.com/
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

prctl: move PR_GET_AUXV out of PR_MCE_KILL

Somehow PR_GET_AUXV got added into PR_MCE_KILL's switch when the patch was
applied [1].

Thus move it out of the switch, to the place the patch added it.

In the recently released v6.4 kernel some user could, in principle, be
already using this feature by mapping the right page and passing the
PR_GET_AUXV constant as a pointer:

    prctl(PR_MCE_KILL, PR_GET_AUXV, ...)

So this does change the behavior for users.  We could keep the bug since
the other subcases in PR_MCE_KILL (PR_MCE_KILL_CLEAR and PR_MCE_KILL_SET)
do not overlap.

However, v6.4 may be recent enough (2 weeks old) that moving the lines
(rather than just adding a new case) does not break anybody?  Moreover,
the documentation in man-pages was just committed today [2].

Link: https://lkml.kernel.org/r/20230708233344.361854-1-ojeda@kernel.org
Fixes: ddc65971bb67 ("prctl: add PR_GET_AUXV to copy auxv to userspace")
Link: https://lore.kernel.org/all/d81864a7f7f43bca6afa2a09fc2e850e4050ab42.1680611394.git.josh@joshtriplett.org/
Link: https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=8cf0c06bfd3c2b219b044d4151c96f0da50af9ad
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs

After activation of interrupts for TPM TIS drivers 0-day reports an
interrupt storm on an Inspur NF5180M6 server.

Fix this by detecting the storm and falling back to polling:
Count the number of unhandled interrupts within a 10 ms time interval. In
case that more than 1000 were unhandled deactivate interrupts entirely,
deregister the handler and use polling instead.

Also print a note to point to the tpm_tis_dmi_table.

Since the interrupt deregistration function devm_free_irq() waits for all
interrupt handlers to finish, only trigger a worker in the interrupt
handler and do the unregistration in the worker to avoid a deadlock.

Note: the storm detection logic equals the implementation in
note_interrupt() which uses timestamps and counters stored in struct
irq_desc. Since this structure is private to the generic interrupt core
the TPM TIS core uses its own timestamps and counters. Furthermore the TPM
interrupt handler always returns IRQ_HANDLED to prevent the generic
interrupt core from processing the interrupt storm.

Cc: stable@vger.kernel.org # v6.4+
Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test")
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305041325.ae8b0c43-yujie.liu@intel.com/
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

tpm/tpm_tis: Disable interrupts for Lenovo L590 devices

The Lenovo L590 suffers from an irq storm issue like the T490, T490s
and P360 Tiny, so add an entry for it to tpm_tis_dmi_table and force
polling.

Cc: stable@vger.kernel.org # v6.4+
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2214069#c0
Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test")
Signed-off-by: Florian Bezdeka <florian@bezdeka.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>