OSDN Git Service
Tian Tao [Tue, 22 Sep 2020 12:44:30 +0000 (20:44 +0800)]
drm/hisilicon: Features to support reading resolutions from EDID
Use drm_get_edid to get the resolution, if that fails, set it to
a fixed resolution. Rewrite the desrtoy callback function to release
resources.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1600778670-60370-3-git-send-email-tiantao6@hisilicon.com
Tian Tao [Tue, 22 Sep 2020 12:44:29 +0000 (20:44 +0800)]
drm/hisilicon: Support i2c driver algorithms for bit-shift adapters
Adding driver implementation to support i2c driver algorithms for
bit-shift adapters, so hibmc will using the interface provided by
drm to read edid.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1600778670-60370-2-git-send-email-tiantao6@hisilicon.com
Antonio Borneo [Tue, 22 Sep 2020 07:42:53 +0000 (09:42 +0200)]
drm/panel: otm8009a: allow using non-continuous dsi clock
The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.
Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.
Changes in v2:
- Added my signed-off
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074253.28810-1-yannick.fertre@st.com
Antonio Borneo [Tue, 22 Sep 2020 07:42:42 +0000 (09:42 +0200)]
drm/panel: otm8009a: remove hack to force commands in HS
The panel is able to receive commands in LP. The current hack to
force backlight commands in HS was due to workaround an incorrect
settings on DSI controller that prevents sending LP commands while
video out was active.
Remove the hack that forces HS commands.
Changes in v2:
- Added my signed-off
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074242.28719-1-yannick.fertre@st.com
Xiaofei Tan [Thu, 17 Sep 2020 09:19:20 +0000 (17:19 +0800)]
fbdev: mx3fb: remove unused variable 'irq'
Remove the variable 'irq' that is set but never used.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1600334360-4214-1-git-send-email-tanxiaofei@huawei.com
Yannick Fertre [Fri, 18 Sep 2020 11:47:36 +0000 (13:47 +0200)]
drm/panel: rm68200: allow using non-continuous dsi clock
The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.
Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918114736.11322-1-yannick.fertre@st.com
Dave Airlie [Thu, 24 Sep 2020 05:18:04 +0000 (15:18 +1000)]
drm/radeon/ttm: handle ttm moves properly
The core move code currently handles use_tt moves, for radeon
this was being handled also in the driver, but not using the same
paths.
If moving between TT/SYSTEM (all the use_tt paths on radeon) use
the core move function.
Eventually the core will be flipped over to calling the driver.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-5-airlied@gmail.com
Dave Airlie [Thu, 24 Sep 2020 05:18:03 +0000 (15:18 +1000)]
drm/amdgpu/ttm: handle tt moves properly.
The core move code currently handles use_tt moves, for amdgpu
this was being handled also in the driver, but not using the same
paths.
If moving between TT/SYSTEM (all the use_tt paths on amdgpu) use
the core move function.
Eventually the core will be flipped over to calling the driver.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-4-airlied@gmail.com
Dave Airlie [Thu, 24 Sep 2020 05:18:02 +0000 (15:18 +1000)]
drm/ttm: handle the SYSTEM->TT path in same place as others.
This just consolidates the code making the flow easier to understand
and also helps when moving move to the driver side.
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-3-airlied@gmail.com
Qinglang Miao [Mon, 21 Sep 2020 13:10:18 +0000 (21:10 +0800)]
drm/panel: simplify the return expression of td028ttec1_prepare
Simplify the return expression.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921131018.91513-1-miaoqinglang@huawei.com
Christian König [Mon, 21 Sep 2020 14:06:36 +0000 (16:06 +0200)]
drm/ttm: remove TTM_PL_FLAG_NO_EVICT
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391604/?series=81973&rev=1
Christian König [Mon, 21 Sep 2020 13:59:50 +0000 (15:59 +0200)]
drm/ttm: remove ttm_bo_create
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391616/?series=81973&rev=1
Christian König [Mon, 21 Sep 2020 13:55:39 +0000 (15:55 +0200)]
drm/amdgpu: switch over to the new pin interface
Stop using TTM_PL_FLAG_NO_EVICT.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391617/?series=81973&rev=1
Christian König [Mon, 21 Sep 2020 11:18:02 +0000 (13:18 +0200)]
drm/radeon: switch over to the new pin interface
Stop using TTM_PL_FLAG_NO_EVICT.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391610/?series=81973&rev=1
Christian König [Mon, 21 Sep 2020 13:24:53 +0000 (15:24 +0200)]
drm/qxl: switch over to the new pin interface
Stop using TTM_PL_FLAG_NO_EVICT.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391607/?series=81973&rev=1
Christian König [Mon, 21 Sep 2020 12:43:59 +0000 (14:43 +0200)]
drm/vram-helper: switch over to the new pin interface
Stop using TTM_PL_FLAG_NO_EVICT.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391603/?series=81973&rev=1
Christian König [Mon, 21 Sep 2020 13:37:12 +0000 (15:37 +0200)]
drm/nouveau: switch over to the new pin interface
Stop using TTM_PL_FLAG_NO_EVICT.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391606/?series=81973&rev=1
Christian König [Mon, 21 Sep 2020 12:37:25 +0000 (14:37 +0200)]
drm/vmwgfx: switch over to the new pin interface v2
Stop using TTM_PL_FLAG_NO_EVICT.
v2: fix unconditional pinning
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391601/?series=81973&rev=1
Christian König [Mon, 21 Sep 2020 12:14:32 +0000 (14:14 +0200)]
drm/vmwgfx: stop using ttm_bo_create v2
Implement in the driver instead since it is the only user of that function.
v2: fix usage of ttm_bo_init_reserved
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391614/?series=81973&rev=1
Christian König [Mon, 21 Sep 2020 10:56:48 +0000 (12:56 +0200)]
drm/vmwgfx: remove unused placement combination
Just some dead code cleanup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391599/?series=81973&rev=1
Christian König [Mon, 21 Sep 2020 11:05:54 +0000 (13:05 +0200)]
drm/ttm: add ttm_bo_pin()/ttm_bo_unpin() v2
As an alternative to the placement flag add a
pin count to the ttm buffer object.
v2: add dma_resv_assert_help() calls
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391596/?series=81973&rev=1
Thomas Zimmermann [Tue, 22 Sep 2020 14:46:55 +0000 (16:46 +0200)]
drm/ast: Reload gamma LUT after changing primary plane's color format
The gamma LUT has to be reloaded after changing the primary plane's
color format. This used to be done implicitly by the CRTC atomic_enable()
helper after updating the primary plane. With the recent reordering of
the steps, the primary plane's setup was moved last and invalidated
the gamma LUT. Fix this by setting the LUT from within atomic_flush().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes:
2f0ddd89fe32 ("drm/ast: Enable CRTC before planes")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200922144655.23624-1-tzimmermann@suse.de
Christian König [Thu, 17 Sep 2020 11:27:35 +0000 (13:27 +0200)]
drm/ttm: remove persistent_swap_storage
Not used any more. Cleanup the code as well while at it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/391079/?series=81804&rev=1
Reviewed-by: Dave Airlie <airlied@redhat.com>
Christian König [Thu, 17 Sep 2020 11:16:53 +0000 (13:16 +0200)]
drm/nouveau: stop using persistent_swap_storage
According to Ben this is most likely just a leftover.
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/391078/?series=81804&rev=1
Reviewed-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Fri, 18 Sep 2020 11:40:17 +0000 (14:40 +0300)]
drm/dp: add a number of DP 2.0 DPCD definitions
Prepare for future with DP 2.0 DPCD definitions, with a couple of
related drive-by cleanups. No functional changes.
v2: Send the version that actually builds.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918114017.30198-2-jani.nikula@intel.com
Jani Nikula [Fri, 18 Sep 2020 11:40:16 +0000 (14:40 +0300)]
drm/dp: add subheadings to DPCD address definitions
Add the subheadings from the DP spec. No functional changes.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918114017.30198-1-jani.nikula@intel.com
Dave Airlie [Wed, 23 Sep 2020 03:04:49 +0000 (13:04 +1000)]
drm/ttm: add bo wait that takes a ctx wrapper.
I'm thinking of pushing the wait into the drivers.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-6-airlied@gmail.com
Dave Airlie [Wed, 23 Sep 2020 03:04:48 +0000 (13:04 +1000)]
drm/nouveau/ttm: plumb ctx through move functions.
This just uses the ctx instead of passing bools and recreating it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-5-airlied@gmail.com
Dave Airlie [Wed, 23 Sep 2020 03:04:47 +0000 (13:04 +1000)]
drm/radeon: cleanup ttm operation ctx usage.
Just pass it around move, and remove unused pieces
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-4-airlied@gmail.com
Dave Airlie [Wed, 23 Sep 2020 03:04:46 +0000 (13:04 +1000)]
drm/qxl: kill unused bo wait wrapper
This wasn't used anywheere
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-3-airlied@gmail.com
Dave Airlie [Wed, 23 Sep 2020 03:04:45 +0000 (13:04 +1000)]
drm/radeon: kill radeon_bo_wait
this is unused
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-2-airlied@gmail.com
Daniel Vetter [Thu, 17 Sep 2020 16:47:22 +0000 (18:47 +0200)]
drm/doc: Document that modifiers are always required for fb
Even for legacy userspace, since otherwise GETFB2 is broken and if you
switch between modifier-less and modifier-aware compositors, smooth
transitions break.
Also it's just best practice to make sure modifiers are invariant for
a given drm_fb, and that a modifier-aware kms drivers only has one
place to store them, ignoring any old implicit bo flags or whatever
else might float around.
Motivated by some irc discussion with Bas about amdgpu modifier
support.
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Fixes:
455e00f1412f ("drm: Add getfb2 ioctl")
Cc: Daniel Stone <daniels@collabora.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Marek Olšák <maraeo@gmail.com>
Cc: "Wentland, Harry" <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917164721.2038541-1-daniel.vetter@ffwll.ch
Christian König [Fri, 18 Sep 2020 14:34:49 +0000 (16:34 +0200)]
drm/ttm: stop dangerous caching attribute change
When we swapout/in a BO we try to change the caching
attributes of the pages before/after doing the copy.
On x86 this is done by calling set_pages_uc(),
set_memory_wc() or set_pages_wb() for not highmem pages
to update the linear mapping of the page.
On all other platforms we do exactly nothing.
Now on x86 this is unnecessary because copy_highpage() will
either create a temporary mapping of the page which is wb
anyway and destroyed immediately again or use the linear
mapping with the correct caching attributes.
So stop this nonsense and just keep the caching as it is and
return an error when a driver tries to change the caching of
an already populated TT object.
This is much more defensive since changing caching
attributes is platform and driver specific and usually
doesn't work after the page was initially allocated.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/391293/
Christian König [Fri, 18 Sep 2020 14:20:20 +0000 (16:20 +0200)]
drm/ttm: remove nonsense AGP handling
map_page_into_agp() and unmap_page_from_agp() are only defined on x86.
On all other platforms they are defined as noops. So this code doesn't has any effect at all.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/391292/
Koba Ko [Tue, 22 Sep 2020 06:53:13 +0000 (14:53 +0800)]
drm/dp_mst: Retrieve extended DPCD caps for topology manager
As per DP-1.3, First check DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT.
If DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is 1,read the DP_DP13_DPCD_REV to
get the faster capability.
If DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is 0,read DP_DPCD_REV.
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added aux name to drm_dbg_kms() call]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922065313.4794-1-koba.ko@canonical.com
Qinglang Miao [Mon, 21 Sep 2020 13:11:10 +0000 (21:11 +0800)]
vga_switcheroo: simplify the return expression of vga_switcheroo_runtime_resume
Simplify the return expression.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921131110.93365-1-miaoqinglang@huawei.com
Colin Ian King [Sun, 20 Sep 2020 14:14:07 +0000 (15:14 +0100)]
drm/gma500: clean up indentation issues
There are a couple of statements that are indented too deeply,
remove the extraneous tabs and also an empty line.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200920141407.32672-1-colin.king@canonical.com
Thomas Zimmermann [Mon, 21 Sep 2020 14:25:36 +0000 (16:25 +0200)]
drm/vram-helper: Fix use of top-down placement
Commit
7053e0eab473 ("drm/vram-helper: stop using TTM placement flags")
cleared the BO placement flags if top-down placement had been selected.
Hence, BOs that were supposed to go into VRAM are now placed in a default
location in system memory.
Trying to scanout the incorrectly pinned BO results in displayed garbage
and an error message.
[ 146.108127] ------------[ cut here ]------------
[ 146.1V08180] WARNING: CPU: 0 PID: 152 at drivers/gpu/drm/drm_gem_vram_helper.c:284 drm_gem_vram_offset+0x59/0x60 [drm_vram_helper]
...
[ 146.108591] ast_cursor_page_flip+0x3e/0x150 [ast]
[ 146.108622] ast_cursor_plane_helper_atomic_update+0x8a/0xc0 [ast]
[ 146.108654] drm_atomic_helper_commit_planes+0x197/0x4c0
[ 146.108699] drm_atomic_helper_commit_tail_rpm+0x59/0xa0
[ 146.108718] commit_tail+0x103/0x1c0
...
[ 146.109302] ---[ end trace
d901a1ba1d949036 ]---
Fix the bug by keeping the placement flags. The top-down placement flag
is stored in a separate variable.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes:
7053e0eab473 ("drm/vram-helper: stop using TTM placement flags")
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200921142536.4392-1-tzimmermann@suse.de
Jason Yan [Wed, 16 Sep 2020 13:23:01 +0000 (21:23 +0800)]
drm/panel: samsung: make vint_table static const
This eliminates the following sparse warning:
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c:217:15: warning: symbol
'vint_table' was not declared. Should it be static?
While at it, make the table const as it is never modified.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916132301.2914017-1-yanaijie@huawei.com
Wang ShaoBo [Fri, 11 Sep 2020 01:44:14 +0000 (09:44 +0800)]
drm/imx/dcss: fix unused but set variable warnings
Fix unused but set variable warning building with `make W=1`:
drivers/gpu/drm/imx/dcss/dcss-plane.c:270:6: warning:
variable ‘pixel_format’ set but not used [-Wunused-but-set-variable]
u32 pixel_format;
^~~~~~~~~~~~
Fixes:
9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911014414.4663-1-bobo.shaobowang@huawei.com
Maxime Ripard [Thu, 17 Sep 2020 12:16:23 +0000 (14:16 +0200)]
drm/vc4: hvs: Pull the state of all the CRTCs prior to PV muxing
The vc4 display engine has a first controller called the HVS that will
perform the composition of the planes. That HVS has 3 FIFOs and can
therefore compose planes for up to three outputs. The timings part is
generated through a component called the Pixel Valve, and the BCM2711 has 6
of them.
Thus, the HVS has some bits to control which FIFO gets output to which
Pixel Valve. The current code supports that muxing by looking at all the
CRTCs in a new DRM atomic state in atomic_check, and given the set of
constraints that we have, assigns FIFOs to CRTCs or reject the mode
entirely. The actual muxing will occur during atomic_commit.
However, that doesn't work if only a fraction of the CRTCs' state is
updated in that state, since it will ignore the CRTCs that are kept running
unmodified, and will thus unassign its associated FIFO, and later disable
it.
In order to make the code work as expected, let's pull the CRTC state of
all the enabled CRTC in our atomic_check so that we can operate on all the
running CRTCs, no matter whether they are affected by the new state or not.
Fixes:
87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917121623.42023-1-maxime@cerno.tech
Tian Tao [Fri, 18 Sep 2020 09:52:58 +0000 (17:52 +0800)]
drm/ttm: update kernel-doc line comments
Update kernel-doc line comments to fix warnings reported by make W=1.
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'glob' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'from_wq' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'extra' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'ctx' not described in 'ttm_shrink'
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391317/
Signed-off-by: Christian König <christian.koenig@amd.com>
Neil Armstrong [Wed, 16 Sep 2020 15:01:47 +0000 (17:01 +0200)]
drm/panfrost: add Amlogic GPU integration quirks
This adds the required GPU quirks, including the quirk in the PWR
registers at the GPU reset time and the IOMMU quirk for shareability
issues observed on G52 in Amlogic G12B SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-4-narmstrong@baylibre.com
Neil Armstrong [Wed, 16 Sep 2020 15:01:46 +0000 (17:01 +0200)]
drm/panfrost: add amlogic reset quirk callback
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM,
G12A/SM1 & G12B SoCs needs a quirk in the PWR registers at the GPU reset
time.
Since the Amlogic's integration of the GPU cores with the SoC is not
publicly documented we do not know what does these values, but they
permit having a fully functional GPU running with Panfrost.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[Steven: Fix typo in commit log]
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-3-narmstrong@baylibre.com
Neil Armstrong [Wed, 16 Sep 2020 15:01:45 +0000 (17:01 +0200)]
drm/panfrost: add support for vendor quirk
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM,
G12A/SM1 & G12B SoCs needs a quirk in the PWR registers after each reset.
This adds a callback in the device compatible struct of permit this.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[Steven: Fix typo in commit log]
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-2-narmstrong@baylibre.com
Daniel Vetter [Fri, 18 Sep 2020 13:25:05 +0000 (15:25 +0200)]
drm/dev: Remove drm_dev_init
We can now also delete drm_dev_init, now that vkms, vgem and i915
selftests are resolved.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-5-daniel.vetter@ffwll.ch
Luben Tuikov [Fri, 18 Sep 2020 13:25:04 +0000 (15:25 +0200)]
drm/amdgpu: Convert to using devm_drm_dev_alloc() (v2)
Convert to using devm_drm_dev_alloc(),
as drm_dev_init() is going away.
v2: Remove drm_dev_put() since
a) devres doesn't do refcounting, see
Documentation/driver-api/driver-model/devres.rst,
Section 4, paragraph 1; and since
b) devres acts as garbage collector when
the DRM device's parent's devres "action" callback
is called to free the container device (amdgpu_device),
which embeds the DRM dev.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-4-daniel.vetter@ffwll.ch
Daniel Vetter [Sat, 19 Sep 2020 13:40:32 +0000 (15:40 +0200)]
drm/i915/selftests: align more to real device lifetimes
To avoid having to create all the device and driver scaffolding we
just manually create and destroy a devres_group.
v2: Rebased
v3: use devres_open/release_group so we can use devm without real
hacks in the driver core or having to create an entire fake bus for
testing drivers. Might want to extract this into helpers eventually,
maybe as a mock_drm_dev_alloc or test_drm_dev_alloc.
v4:
- Fix IS_ERR handling (Matt)
- Delete surplus put_device() in mock_device_release (intel-gfx-ci)
v5:
- do not switch to device_add - it breaks runtime pm in the tests and
with the devres_group_add/release no longer needed for automatic
cleanup (CI). Update commit message to match.
- print correct error in pr_err (Matt)
v6: Remove now unused err variable (CI).
v7: More warning fixes ...
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v3)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> (v4)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200919134032.2488403-1-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 18 Sep 2020 13:25:02 +0000 (15:25 +0200)]
drm/i915/selftest: Create mock_destroy_device
Just some prep work before we rework the lifetime handling, which
requires replacing all the drm_dev_put in selftests by something else.
v2: Don't go with a static inline, upsets the header tests and
separation.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-2-daniel.vetter@ffwll.ch
Jing Xiangfeng [Fri, 18 Sep 2020 01:05:21 +0000 (09:05 +0800)]
fbcon: Remove the superfluous break
Remove the superfluous break, as there is a 'return' before it.
Fixes:
bad07ff74c32 ("fbcon: smart blitter usage for scrolling")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918010521.69950-1-jingxiangfeng@huawei.com
Vaibhav Gupta [Thu, 17 Sep 2020 11:53:14 +0000 (17:23 +0530)]
fbdev: aty: remove CONFIG_PM container
The changes made in below mentioned commit removed CONFIG_PM containers
from drivers/video/fbdev/aty/atyfb_base.c but not from
drivers/video/fbdev/aty/atyfb.h for respective callbacks.
This resulted in error for implicit declaration for those callbacks.
Fixes:
348b2956d5e6 ("fbdev: aty: use generic power management")
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917115313.725622-1-vaibhavgupta40@gmail.com
Dave Airlie [Thu, 17 Sep 2020 06:13:03 +0000 (16:13 +1000)]
drm/ttm: drop evicted from ttm_bo.
This was unused.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917064132.148521-3-airlied@gmail.com
Dave Airlie [Thu, 17 Sep 2020 06:36:14 +0000 (16:36 +1000)]
drm/ttm: drop special pipeline accel cleanup function.
The two accel cleanup paths were mostly the same once refactored.
Just pass a bool to say if the evictions are to be pipelined.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917064132.148521-2-airlied@gmail.com
Dave Airlie [Thu, 17 Sep 2020 04:13:06 +0000 (14:13 +1000)]
drm/ttm: make common function for wait/free node path.
The pipeline and accel cleansups has similiar paths here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-8-airlied@gmail.com
Dave Airlie [Thu, 17 Sep 2020 04:08:29 +0000 (14:08 +1000)]
drm/ttm: move ghost object creation to a common function
Both accel cleanup and pipeline move had the same code, make
a single function for it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-7-airlied@gmail.com
Dave Airlie [Thu, 17 Sep 2020 04:03:46 +0000 (14:03 +1000)]
drm/ttm: add a simple assign mem to bo wrapper
This pattern is called in a few places, just clean it up.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-6-airlied@gmail.com
Dave Airlie [Thu, 17 Sep 2020 03:48:59 +0000 (13:48 +1000)]
drm/ttm/drivers: call the bind function directly.
Now the bind functions have all the protection explicitly the
drivers can just call them directly, and the api can be unexported
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-5-airlied@gmail.com
Dave Airlie [Thu, 17 Sep 2020 03:24:50 +0000 (13:24 +1000)]
drm/ttm: move unbind into the tt destroy.
This moves unbind into the driver side on destroy paths.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-4-airlied@gmail.com
Dave Airlie [Thu, 17 Sep 2020 03:20:48 +0000 (13:20 +1000)]
drm/ttm: flip tt destroy ordering.
Call the driver first and have it call the common code cleanup.
This is useful later to fix unbind.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-3-airlied@gmail.com
Dave Airlie [Thu, 17 Sep 2020 02:54:24 +0000 (12:54 +1000)]
drm/ttm: protect against reentrant bind in the drivers
This moves the generic tracking into the drivers and protects
against reentrancy in the drivers. It fixes up radeon and agp
to be able to query the bound status as that is required.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-2-airlied@gmail.com
Christian König [Wed, 16 Sep 2020 13:31:28 +0000 (15:31 +0200)]
drm/ttm: remove superflous extern attribute from funcs
Extern is the default attribute for functions anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/390972/
Daniel Vetter [Tue, 28 Jul 2020 13:58:39 +0000 (15:58 +0200)]
dma-resv: lockdep-prime address_space->i_mmap_rwsem for dma-resv
GPU drivers need this in their shrinkers, to be able to throw out
mmap'ed buffers. Note that we also need dma_resv_lock in shrinkers,
but that loop is resolved by trylocking in shrinkers.
So full hierarchy is now (ignore some of the other branches we already
have primed):
mmap_read_lock -> dma_resv -> shrinkers -> i_mmap_lock_write
I hope that's not inconsistent with anything mm or fs does, adding
relevant people.
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Dave Chinner <david@fromorbit.com>
Cc: Qian Cai <cai@lca.pw>
Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: Thomas Hellström (Intel) <thomas_os@shipmail.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: linux-mm@kvack.org
Cc: linux-rdma@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728135839.1035515-1-daniel.vetter@ffwll.ch
Wang Qing [Thu, 17 Sep 2020 02:04:32 +0000 (10:04 +0800)]
drm: fix spelling error in comments
Change the comment typo: "manger" -> "manager".
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1600308275-32094-1-git-send-email-wangqing@vivo.com
Lukas Bulwahn [Sat, 12 Sep 2020 18:33:34 +0000 (20:33 +0200)]
MAINTAINERS: make linux-aspeed list remarks consistent
Commit
f15a3ea80391 ("MAINTAINERS: Add ASPEED BMC GFX DRM driver entry")
does not mention that linux-aspeed@lists.ozlabs.org is moderated for
non-subscribers, but the other three entries for
linux-aspeed@lists.ozlabs.org do.
By 'majority vote' among entries, let us assume it was just missed here and
adjust it to be consistent with others.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912183334.22683-1-lukas.bulwahn@gmail.com
Christian König [Tue, 15 Sep 2020 14:29:26 +0000 (16:29 +0200)]
drm/ttm: some cleanups
Unexport ttm_check_under_lowerlimit.
Make ttm_bo_acc_size static and unexport it.
Remove ttm_get_kernel_zone_memory_size.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390515/
Maxime Ripard [Wed, 16 Sep 2020 08:56:29 +0000 (10:56 +0200)]
Merge branch 'virtio-shm' of git://git./linux/kernel/git/mszeredi/fuse into drm-misc-next
Topic pull request for core virtio changes that will be required by the DRM
driver.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
From: Gurchetan Singh <gurchetansingh@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/CAAfnVBn2BzXWFY3hhjDxd5q0P2_JWn-HdkVxgS94x9keAUZiow@mail.gmail.com
Thomas Zimmermann [Mon, 14 Sep 2020 07:22:36 +0000 (09:22 +0200)]
drm/ast: Enable CRTC before planes
An active cursor plane requires a valid display mode. Change the
commit_tail callback, so that it sets up the CRTC's mode before
updating planes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-5-tzimmermann@suse.de
Thomas Zimmermann [Mon, 14 Sep 2020 07:22:35 +0000 (09:22 +0200)]
drm/ast: Program display mode in CRTC's atomic_enable()
This change simplifies ast's modesetting code. The display mode
is now programmed from within the CRTC's atomic_enable(), which
only runs if we actually want to program the mode.
Corresponding code in atomic_flush() is being removed. Also removed
is atomic_begin(), which serves no purpose at all.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-4-tzimmermann@suse.de
Thomas Zimmermann [Mon, 14 Sep 2020 07:22:34 +0000 (09:22 +0200)]
drm/ast: Disable planes while switching display modes
The ast HW cursor requires the primary plane and CRTC to display at
a valid mode and format. This is not the case while switching
display modes, which can lead to the screen turing permanently dark.
As a workaround, the ast driver now disables active planes while the
mode or format switch takes place. It also synchronizes with the vertical
refresh to give CRTC and planes some time to catch up on each other.
The active planes planes (primary or cursor) will be re-enabled by
each plane's atomic_update() function.
v3:
* move the logic into the CRTC's atomic_disable function
v2:
* move the logic into the commit-tail function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-3-tzimmermann@suse.de
Thomas Zimmermann [Mon, 14 Sep 2020 07:22:33 +0000 (09:22 +0200)]
drm/ast: Set format registers in primary plane's update
The atomic modesetting code tried to distinguish format changes from
full modesetting operations. But the implementation was buggy and the
format registers were often updated even for simple pageflips.
Fix this problem by handling format changes in the primary plane's
update function.
v3:
* program format in primary plane's update function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-2-tzimmermann@suse.de
Thomas Zimmermann [Tue, 15 Sep 2020 07:17:08 +0000 (09:17 +0200)]
MAINTAINERS: Add Thomas as reviewer for ast, mgag200 and udl
I'm adding myself as reviewer for ast, mgag200 and udl. I've already
been keeping these drivers in shape for a while.
While at it I'm also setting the list and tree for ast and mgag200,
and update each driver's status to Supported. Working on these drivers
is part of my job.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915071708.4743-1-tzimmermann@suse.de
Stefan Agner [Tue, 8 Sep 2020 14:16:54 +0000 (16:16 +0200)]
drm: mxsfb: check framebuffer pitch
The lcdif IP does not support a framebuffer pitch (stride) other than
framebuffer width. Check for equality and reject the framebuffer
otherwise.
This prevents a distorted picture when using 640x800 and running the
Mesa graphics stack. Mesa tries to use a cache aligned stride, which
leads at that particular resolution to width != stride. Currently
Mesa has no fallback behavior, but rejecting this configuration allows
userspace to handle the issue correctly.
Fixes:
45d59d704080 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908141654.266836-1-stefan@agner.ch
Tian Tao [Fri, 11 Sep 2020 08:09:37 +0000 (16:09 +0800)]
drm/vc4: Handing the return value of drm_universal_plane_init
Handing the return value of drm_universal_plane_init to fix the following
W=1 kernel build warning(s):
vc4_plane.c: In function ‘vc4_plane_init’:
vc4_plane.c:1340:6: warning: variable ‘ret’ set but not
used [-Wunused-but-set-variable]
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1599811777-34093-1-git-send-email-tiantao6@hisilicon.com
Dave Airlie [Tue, 15 Sep 2020 01:47:19 +0000 (11:47 +1000)]
drm/ttm: move populated state into page flags
Just use the top bit of page flags to store the populated state.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-8-airlied@gmail.com
Dave Airlie [Tue, 15 Sep 2020 01:42:30 +0000 (11:42 +1000)]
drm/ttm: split bound/populated flags.
Move bound up into the bo object, and keep populated with the tt
object.
The ghost object handling needs to follow the flags at the bo
level now instead of it being part of the ttm tt object.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-7-airlied@gmail.com
Dave Airlie [Tue, 15 Sep 2020 01:34:51 +0000 (11:34 +1000)]
drm/ttm: move ttm binding/unbinding out of ttm_tt paths.
Move these up to the bo level, moving ttm_tt to just being
backing store. Next step is to move the bound flag out.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-6-airlied@gmail.com
Dave Airlie [Tue, 15 Sep 2020 01:16:53 +0000 (11:16 +1000)]
drm/ttm: split populate out from binding.
Drivers have to call populate themselves now before binding.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-5-airlied@gmail.com
Dave Airlie [Tue, 15 Sep 2020 01:04:08 +0000 (11:04 +1000)]
drm/ttm: tt destroy move null check to outer function.
This just makes things easier later.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-4-airlied@gmail.com
Dave Airlie [Tue, 15 Sep 2020 01:02:12 +0000 (11:02 +1000)]
drm/ttm: wrap tt destroy. (v2)
All places this was called was using bo->ttm either direct
or indirectly.
v2: move to ttm_bo
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-3-airlied@gmail.com
Dave Airlie [Tue, 15 Sep 2020 00:21:15 +0000 (10:21 +1000)]
drm/ttm/tt: add wrappers to set tt state.
This adds 2 getters and 4 setters, however unbound and populated
are currently the same thing, this will change, it also drops
a BUG_ON that seems not that useful.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-2-airlied@gmail.com
Christian König [Fri, 11 Sep 2020 14:01:21 +0000 (16:01 +0200)]
drm/ttm: remove available_caching
Instead of letting TTM make an educated guess based on
some mask all drivers should just specify what caching
they want for their CPU mappings.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390207/
Christian König [Fri, 11 Sep 2020 13:36:30 +0000 (15:36 +0200)]
drm/nouveau: explicitly specify caching to use
Instead of letting TTM masking the caching bits
specify directly what the driver needs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390206
Christian König [Fri, 11 Sep 2020 13:06:53 +0000 (15:06 +0200)]
drm/ttm: remove default caching
As far as I can tell this was never used either and we just
always fallback to the order cached > wc > uncached anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390142/
Enric Balletbo i Serra [Thu, 27 Aug 2020 08:59:11 +0000 (10:59 +0200)]
drm/bridge: ps8640: Rework power state handling
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl)
-> drm_helper_probe_single_connector_modes
-> drm_bridge_connector_get_modes
-> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before
get_edid(), the driver will not be able to get the EDID properly and
display will not work until a second get_edid() call is issued and if
pre_enable() is called before. The side effect of this, for example, is
that you see anything when `Frecon` starts, neither the splash screen,
until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before
reading the EDID. This means the following:
1. If get_edid() is called before having the device powered we need to
power on the device. In such case, the driver will power off again the
device.
2. If get_edid() is called after having the device powered, all should
just work. We added a powered flag in order to avoid recurrent calls
to ps8640_bridge_poweron() and unneeded delays.
3. This seems to be specific for this device, but we need to make sure
the panel is powered on before do a power on cycle on this device.
Otherwise the device fails to retrieve the EDID.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827085911.944899-2-enric.balletbo@collabora.com
Gerd Hoffmann [Tue, 8 Sep 2020 07:07:23 +0000 (09:07 +0200)]
drm/virtio: add virtio_gpu_cmd_unref_resource error handling
Usually we wait for the host to complete the unref request, then cleanup
the guest-side state of the object in the completion callback. When
submitting the unref command failed the completion callback will not be
called though, so cleanup right away.
Fixes a WARN on stale mm entries on driver shutdown.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-4-kraxel@redhat.com
Gerd Hoffmann [Tue, 8 Sep 2020 07:07:22 +0000 (09:07 +0200)]
drm/virtio: return virtio_gpu_queue errors
In case queuing virtio commands fails (can happen when
the device got unplugged) pass up the error.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-3-kraxel@redhat.com
Gerd Hoffmann [Tue, 8 Sep 2020 07:07:21 +0000 (09:07 +0200)]
drm/virtio: use drmm_mode_config_init
Use managed init call to simplify cleanup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-2-kraxel@redhat.com
Paul Cercueil [Sat, 12 Sep 2020 19:56:39 +0000 (21:56 +0200)]
gpu/drm: ingenic: Add option to mmap GEM buffers cached
Ingenic SoCs are most notably used in cheap chinese handheld gaming
consoles. There, the games and applications generally render in software
directly into GEM buffers.
Traditionally, GEM buffers are mapped write-combine. Writes to the
buffer are accelerated, and reads are slow. Application doing lots of
alpha-blending paint inside shadow buffers, which is then memcpy'd into
the final GEM buffer.
On recent Ingenic SoCs however, it is much faster to have a fully cached
GEM buffer, in which applications paint directly, and whose data is
invalidated before scanout, than having a write-combine GEM buffer, even
when alpha blending is not used.
Add an optional 'cached_gem_buffers' parameter to the ingenic-drm driver
to allow GEM buffers to be mapped fully-cached, in order to speed up
software rendering.
v2: Use standard noncoherent DMA APIs
v3: Use damage clips instead of invalidating full frames
v4: Avoid dma_pgprot() which is not exported. Using vm_get_page_prot()
is enough in this case.
v5:
- Avoid calling drm_gem_cma_prime_mmap(). It has the side effect that an
extra object reference is obtained, which causes our dumb buffers to
never be freed. It should have been drm_gem_cma_mmap_obj(). However,
our custom mmap function only differs with one flag, so we can cleanly
handle both modes in ingenic_drm_gem_mmap().
- Call drm_gem_vm_close() if drm_mmap_attrs() failed, just like in
drm_gem_cma_mmap_obj().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912195639.176001-1-paul@crapouillou.net
Ville Syrjälä [Mon, 7 Sep 2020 12:00:26 +0000 (15:00 +0300)]
drm/i915: Drop the drm_atomic_helper_calc_timestamping_constants() call
We update the timestamping constants per-crtc explicitly in
intel_crtc_update_active_timings(). Furtermore the helper will
use uapi.adjusted_mode whereas we want hw.adjusted_mode. Thus
let's drop the helper call an rely on what we already have in
intel_crtc_update_active_timings(). We can now also drop the
hw.adjusted_mode -> uapi.adjusted_mode copy hack that was added
to keep the helper from deriving the timestamping constants from
the wrong thing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 7 Sep 2020 12:00:25 +0000 (15:00 +0300)]
drm/atomic-helper: Remove the timestamping constant update from drm_atomic_helper_update_legacy_modeset_state()
The timestamping constants have nothing to do with any legacy state
so should not be updated from
drm_atomic_helper_update_legacy_modeset_state().
Let's make everyone call drm_atomic_helper_calc_timestamping_constants()
directly instead of relying on
drm_atomic_helper_update_legacy_modeset_state() to call it.
@@
expression S;
@@
- drm_atomic_helper_calc_timestamping_constants(S);
@@
expression D, S;
@@
drm_atomic_helper_update_legacy_modeset_state(D, S);
+ drm_atomic_helper_calc_timestamping_constants(S);
v2: Update drm_crtc_vblank_helper_get_vblank_timestamp{,_internal}() docs (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 7 Sep 2020 12:00:24 +0000 (15:00 +0300)]
drm/atomic-helper: Extract drm_atomic_helper_calc_timestamping_constants()
Put the vblank timestamping constants update loop into its own
function. It has no business living inside
drm_atomic_helper_update_legacy_modeset_state() so we'll be wanting
to move it out entirely. As a first step we'll still call it
from drm_atomic_helper_update_legacy_modeset_state().
v2: Drop comment about 'legacy state' in the new function
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maxime Ripard [Mon, 14 Sep 2020 16:11:40 +0000 (18:11 +0200)]
Merge drm/drm-next into drm-misc-next
Paul Cercueil needs some patches in -rc5 to apply new patches for ingenic
properly.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Daniel Vetter [Mon, 14 Sep 2020 15:19:11 +0000 (17:19 +0200)]
Merge v5.9-rc5 into drm-next
Paul needs
1a21e5b930e8 ("drm/ingenic: Fix leak of device_node
pointer") and
3b5b005ef7d9 ("drm/ingenic: Fix driver not probing when
IPU port is missing") from -fixes to be able to merge further ingenic
patches into -next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jia Yang [Tue, 14 Jul 2020 08:32:36 +0000 (10:32 +0200)]
drm: fix double free for gbo in drm_gem_vram_init and drm_gem_vram_create
I got a use-after-free report when doing some fuzz test:
If ttm_bo_init() fails, the "gbo" and "gbo->bo.base" will be
freed by ttm_buffer_object_destroy() in ttm_bo_init(). But
then drm_gem_vram_create() and drm_gem_vram_init() will free
"gbo" and "gbo->bo.base" again.
BUG: KMSAN: use-after-free in drm_vma_offset_remove+0xb3/0x150
CPU: 0 PID: 24282 Comm: syz-executor.1 Tainted: G B W 5.7.0-rc4-msan #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack
dump_stack+0x1c9/0x220
kmsan_report+0xf7/0x1e0
__msan_warning+0x58/0xa0
drm_vma_offset_remove+0xb3/0x150
drm_gem_free_mmap_offset
drm_gem_object_release+0x159/0x180
drm_gem_vram_init
drm_gem_vram_create+0x7c5/0x990
drm_gem_vram_fill_create_dumb
drm_gem_vram_driver_dumb_create+0x238/0x590
drm_mode_create_dumb
drm_mode_create_dumb_ioctl+0x41d/0x450
drm_ioctl_kernel+0x5a4/0x710
drm_ioctl+0xc6f/0x1240
vfs_ioctl
ksys_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x2e9/0x410
__x64_sys_ioctl+0x4a/0x70
do_syscall_64+0xb8/0x160
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x4689b9
Code: fd e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f368fa4dc98 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
000000000076bf00 RCX:
00000000004689b9
RDX:
0000000020000240 RSI:
00000000c02064b2 RDI:
0000000000000003
RBP:
0000000000000004 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
00000000004d17e0 R14:
00007f368fa4e6d4 R15:
000000000076bf0c
Uninit was created at:
kmsan_save_stack_with_flags
kmsan_internal_poison_shadow+0x66/0xd0
kmsan_slab_free+0x6e/0xb0
slab_free_freelist_hook
slab_free
kfree+0x571/0x30a0
drm_gem_vram_destroy
ttm_buffer_object_destroy+0xc8/0x130
ttm_bo_release
kref_put
ttm_bo_put+0x117d/0x23e0
ttm_bo_init_reserved+0x11c0/0x11d0
ttm_bo_init+0x289/0x3f0
drm_gem_vram_init
drm_gem_vram_create+0x775/0x990
drm_gem_vram_fill_create_dumb
drm_gem_vram_driver_dumb_create+0x238/0x590
drm_mode_create_dumb
drm_mode_create_dumb_ioctl+0x41d/0x450
drm_ioctl_kernel+0x5a4/0x710
drm_ioctl+0xc6f/0x1240
vfs_ioctl
ksys_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x2e9/0x410
__x64_sys_ioctl+0x4a/0x70
do_syscall_64+0xb8/0x160
entry_SYSCALL_64_after_hwframe+0x44/0xa9
If ttm_bo_init() fails, the "gbo" will be freed by
ttm_buffer_object_destroy() in ttm_bo_init(). But then
drm_gem_vram_create() and drm_gem_vram_init() will free
"gbo" again.
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Jia Yang <jiayang5@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714083238.28479-2-tzimmermann@suse.de
Thomas Zimmermann [Fri, 11 Sep 2020 07:59:22 +0000 (09:59 +0200)]
drm/vboxvideo: Use drm_gem_vram_vmap() interfaces
VRAM helpers support ref counting for pin and vmap operations, no need
to avoid these operations by employing the internal kmap interface. Just
use drm_gem_vram_vmap() and let it handle the details.
Also unexport the kmap interfaces from VRAM helpers. Vboxvideo was the
last user of these internal functions.
v2:
* fixed a comma in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911075922.19317-1-tzimmermann@suse.de
Linus Torvalds [Sun, 13 Sep 2020 23:06:00 +0000 (16:06 -0700)]
Linux 5.9-rc5
Linus Torvalds [Sun, 13 Sep 2020 21:54:40 +0000 (14:54 -0700)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes I've been accruing over the last few weeks, none
of them have been severe enough to warrant flushing the queue but it's
been long enough now that it's a good idea to send them in.
A handful of them are fixups for QSPI DT/bindings/compatibles, some
smaller fixes for system DMA clock control and TMU interrupts on i.MX,
a handful of fixes for OMAP, including a fix for DSI (display) on
omap5"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
arm64: dts: ns2: Fixed QSPI compatible string
ARM: dts: BCM5301X: Fixed QSPI compatible string
ARM: dts: NSP: Fixed QSPI compatible string
ARM: dts: bcm: HR2: Fixed QSPI compatible string
dt-bindings: spi: Fix spi-bcm-qspi compatible ordering
ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
arm64: dts: imx8mp: correct sdma1 clk setting
arm64: dts: imx8mq: Fix TMU interrupt property
ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy
ARM: dts: vfxxx: Add syscon compatible with OCOTP
ARM: dts: imx6q-logicpd: Fix broken PWM
arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build
ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name
ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells
ARM: dts: imx7ulp: Correct gpio ranges
ARM: dts: ls1021a: fix QuadSPI-memory reg range
arm64: defconfig: Enable ptn5150 extcon driver
arm64: defconfig: Enable USB gadget with configfs
ARM: configs: Update Integrator defconfig
ARM: dts: omap5: Fix DSI base address and clocks
...
Linus Torvalds [Sun, 13 Sep 2020 16:23:54 +0000 (09:23 -0700)]
Merge tag 'usb-5.9-rc5' of git://git./linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 5.9-rc5.
Nothing huge, just a number of bugfixes and new device ids for
problems reported:
- new USB serial driver ids
- bug fixes for syzbot reported problems
- typec driver fixes
- thunderbolt driver fixes
- revert of reported broken commit
All of these have been in linux-next with no reported issues"
* tag 'usb-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes
usb: typec: intel_pmc_mux: Do not configure Altmode HPD High
usb: core: fix slab-out-of-bounds Read in read_descriptors
Revert "usb: dwc3: meson-g12a: fix shared reset control use"
usb: typec: ucsi: acpi: Check the _DEP dependencies
usb: typec: intel_pmc_mux: Un-register the USB role switch
usb: Fix out of sync data toggle if a configured device is reconfigured
USB: serial: option: support dynamic Quectel USB compositions
USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules
thunderbolt: Use maximum USB3 link rate when reclaiming if link is not up
thunderbolt: Disable ports that are not implemented
USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
Linus Torvalds [Sun, 13 Sep 2020 16:15:20 +0000 (09:15 -0700)]
Merge tag 'staging-5.9-rc5' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are a number of staging and IIO driver fixes for 5.9-rc5.
The majority of these are IIO driver fixes, to resolve a timestamp
issue that was recently found to affect a bunch of IIO drivers.
The other fixes in here are:
- small IIO driver fixes
- greybus driver fix
- counter driver fix (came in through the IIO fixes tree)
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
iio: adc: mcp3422: fix locking on error path
iio: adc: mcp3422: fix locking scope
iio: adc: meson-saradc: Use the parent device to look up the calib data
iio:adc:max1118 Fix alignment of timestamp and data leak issues
iio:adc:ina2xx Fix timestamp alignment issue.
iio:adc:ti-adc084s021 Fix alignment and data leak issues.
iio:adc:ti-
adc081c Fix alignment and data leak issues
iio:magnetometer:ak8975 Fix alignment and data leak issues.
iio:light:ltr501 Fix timestamp alignment issue.
iio:light:max44000 Fix timestamp alignment and prevent data leak.
iio:chemical:ccs811: Fix timestamp alignment and prevent data leak.
iio:proximity:mb1232: Fix timestamp alignment and prevent data leak.
iio:accel:mma7455: Fix timestamp alignment and prevent data leak.
iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.
iio:accel:mma8452: Fix timestamp alignment and prevent data leak.
iio: accel: kxsd9: Fix alignment of local buffer.
iio: adc: rockchip_saradc: select IIO_TRIGGERED_BUFFER
iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set
counter: microchip-tcb-capture: check the correct variable
iio: cros_ec: Set Gyroscope default frequency to 25Hz
...
Linus Torvalds [Sun, 13 Sep 2020 16:02:59 +0000 (09:02 -0700)]
Merge tag 'driver-core-5.9-rc5' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 5.9-rc5
Included in here are:
- firmware loader memory leak fix
- firmware loader testing fixes for non-EFI systems
- device link locking fixes found by lockdep
- kobject_del() bugfix that has been affecting some callers
- debugfs minor fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
test_firmware: Test platform fw loading on non-EFI systems
PM: <linux/device.h>: fix @em_pd kernel-doc warning
kobject: Drop unneeded conditional in __kobject_del()
driver core: Fix device_pm_lock() locking for device links
MAINTAINERS: Add the security document to SECURITY CONTACT
driver code: print symbolic error code
debugfs: Fix module state check condition
kobject: Restore old behaviour of kobject_del(NULL)
firmware_loader: fix memory leak for paged buffer