OSDN Git Service
David S. Miller [Wed, 15 Nov 2017 05:26:46 +0000 (14:26 +0900)]
Merge branch 'sparc64-optimized-fls'
Vijay Kumar says:
====================
sparc64: Optimize fls and __fls
SPARC provides lzcnt instruction (with VIS3) which can be used to
optimize fls, __fls and fls64 functions. For the systems that supports
lzcnt instruction, we now do boot time patching to use sparc
optimized fls, __fls and fls64 functions.
v3->v4:
- Fixed a typo.
v2->v3:
- Using ENTRY(), ENDPROC() for assembler functions.
- Removed BITS_PER_LONG from __fls.
- Using generic fls64().
- Replaced lzcnt instruction with .word directive.
v1->v2:
- Fixed delay slot issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vijay Kumar [Wed, 11 Oct 2017 18:50:06 +0000 (12:50 -0600)]
sparc64: Use sparc optimized fls and __fls for T4 and above
For T4 and above, patch fls and __fls functions
at the boot time to use lzcnt instruction.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vijay Kumar [Wed, 11 Oct 2017 18:50:05 +0000 (12:50 -0600)]
sparc64: SPARC optimized __fls function
Defined SPARC optimized __fls using lzcnt opcode.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vijay Kumar [Wed, 11 Oct 2017 18:50:04 +0000 (12:50 -0600)]
sparc64: SPARC optimized fls function
Defined SPARC optimized fls using lzcnt opcode.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vijay Kumar [Wed, 11 Oct 2017 18:50:03 +0000 (12:50 -0600)]
sparc64: Define SPARC default __fls function
__fls will now require a boot time patching on T4 and above.
Redefining it under arch/sparc/lib.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vijay Kumar [Wed, 11 Oct 2017 18:50:02 +0000 (12:50 -0600)]
sparc64: Define SPARC default fls function
fls will now require a boot time patching on T4 and above.
Redefining it under arch/sparc/lib.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nagarathnam Muthusamy [Thu, 21 Sep 2017 15:05:31 +0000 (11:05 -0400)]
vDSO for sparc
Following patch is based on work done by Nick Alcock on 64-bit vDSO for sparc
in Oracle linux. I have extended it to include support for 32-bit vDSO for sparc
on 64-bit kernel.
vDSO for sparc is based on the X86 implementation. This patch
provides vDSO support for both 64-bit and 32-bit programs on 64-bit kernel.
vDSO will be disabled on 32-bit linux kernel on sparc.
*) vclock_gettime.c contains all the vdso functions. Since data page is mapped
before the vdso code page, the pointer to data page is got by subracting offset
from an address in the vdso code page. The return address stored in
%i7 is used for this purpose.
*) During compilation, both 32-bit and 64-bit vdso images are compiled and are
converted into raw bytes by vdso2c program to be ready for mapping into the
process. 32-bit images are compiled only if CONFIG_COMPAT is enabled. vdso2c
generates two files vdso-image-64.c and vdso-image-32.c which contains the
respective vDSO image in C structure.
*) During vdso initialization, required number of vdso pages are allocated and
raw bytes are copied into the pages.
*) During every exec, these pages are mapped into the process through
arch_setup_additional_pages and the location of mapping is passed on to the
process through aux vector AT_SYSINFO_EHDR which is used by glibc.
*) A new update_vsyscall routine for sparc is added to keep the data page in
vdso updated.
*) As vDSO cannot contain dynamically relocatable references, a new version of
cpu_relax is added for the use of vDSO.
This change also requires a putback to glibc to use vDSO. For testing,
programs planning to try vDSO can be compiled against the generated
vdso(64/32).so in the source.
Testing:
========
[root@localhost ~]# cat vdso_test.c
int main() {
struct timespec tv_start, tv_end;
struct timeval tv_tmp;
int i;
int count = 1 * 1000 * 10000;
long long diff;
clock_gettime(0, &tv_start);
for (i = 0; i < count; i++)
gettimeofday(&tv_tmp, NULL);
clock_gettime(0, &tv_end);
diff = (long long)(tv_end.tv_sec -
tv_start.tv_sec)*(1*1000*1000*1000);
diff += (tv_end.tv_nsec - tv_start.tv_nsec);
printf("Start sec: %d\n", tv_start.tv_sec);
printf("End sec : %d\n", tv_end.tv_sec);
printf("%d cycles in %lld ns = %f ns/cycle\n", count, diff,
(double)diff / (double)count);
return 0;
}
[root@localhost ~]# cc vdso_test.c -o t32_without_fix -m32 -lrt
[root@localhost ~]# ./t32_without_fix
Start sec:
1502396130
End sec :
1502396140
10000000 cycles in
9565148528 ns = 956.514853 ns/cycle
[root@localhost ~]# cc vdso_test.c -o t32_with_fix -m32 ./vdso32.so.dbg
[root@localhost ~]# ./t32_with_fix
Start sec:
1502396168
End sec :
1502396169
10000000 cycles in
798141262 ns = 79.814126 ns/cycle
[root@localhost ~]# cc vdso_test.c -o t64_without_fix -m64 -lrt
[root@localhost ~]# ./t64_without_fix
Start sec:
1502396208
End sec :
1502396218
10000000 cycles in
9846091800 ns = 984.609180 ns/cycle
[root@localhost ~]# cc vdso_test.c -o t64_with_fix -m64 ./vdso64.so.dbg
[root@localhost ~]# ./t64_with_fix
Start sec:
1502396257
End sec :
1502396257
10000000 cycles in
380984048 ns = 38.098405 ns/cycle
V1 to V2 Changes:
=================
Added hot patching code to switch the read stick instruction to read
tick instruction based on the hardware.
V2 to V3 Changes:
=================
Merged latest changes from sparc-next and moved the initialization
of clocksource_tick.archdata.vclock_mode to time_init_early. Disabled
queued spinlock and rwlock configuration when simulating 32-bit config
to compile 32-bit VDSO.
V3 to V4 Changes:
=================
Hardcoded the page size as 8192 in linker script for both 64-bit and
32-bit binaries. Removed unused variables in vdso2c.h. Added -mv8plus flag to
Makefile to prevent the generation of relocation entries for __lshrdi3 in 32-bit
vdso binary.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Nagarathnam Muthusamy <nagarathnam.muthusamy@oracle.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 28 Sep 2017 05:38:19 +0000 (22:38 -0700)]
sparc32: Add cmpxchg64().
This fixes the build with i40e driver enabled.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corentin Labbe [Mon, 18 Sep 2017 18:10:36 +0000 (20:10 +0200)]
sbus: char: Move D7S_MINOR to include/linux/miscdevice.h
This patch move the define for D7S_MINOR to include/linux/miscdevice.h.
It's better that all minor number are in the same place.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corentin Labbe [Mon, 18 Sep 2017 17:58:21 +0000 (19:58 +0200)]
sparc: time: Remove unneeded linux/miscdevice.h include
arch/sparc/kernel/time_64.c does not contain any miscdevice so the
inclusion of linux/miscdevice.h is unnecessary.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guenter Roeck [Sun, 10 Sep 2017 20:44:47 +0000 (13:44 -0700)]
sparc64: mmu_context: Add missing include files
Fix the following build errors.
In file included from arch/sparc/include/asm/mmu_context.h:4:0,
from include/linux/mmu_context.h:4,
from drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h:29,
from drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:23:
arch/sparc/include/asm/mmu_context_64.h:22:37: error:
unknown type name 'per_cpu_secondary_mm'
arch/sparc/include/asm/mmu_context_64.h: In function 'switch_mm':
arch/sparc/include/asm/mmu_context_64.h:79:2: error:
implicit declaration of function 'smp_processor_id'
Fixes:
70539bd79500 ("drm/amd: Update MEC HQD loading code for KFD")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 27 Sep 2017 19:22:12 +0000 (12:22 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs
Pull quota and isofs fixes from Jan Kara:
"Two quota fixes (fallout of the quota locking changes) and an isofs
build fix"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Fix quota corruption with generic/232 test
isofs: fix build regression
quota: add missing lock into __dquot_transfer()
Linus Torvalds [Wed, 27 Sep 2017 17:51:08 +0000 (10:51 -0700)]
Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of:
- fixes to several existing tests
- a test for regression introduced by
b9470c27607b ("inet: kill
smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results"
* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
selftests: timers: set-timer-lat: fix hang when std out/err are redirected
selftests/memfd: correct run_tests.sh permission
selftests/seccomp: Support glibc 2.26 siginfo_t.h
selftests: futex: Makefile: fix for loops in targets to run silently
selftests: Makefile: fix for loops in targets to run silently
selftests: mqueue: Use full path to run tests from Makefile
selftests: futex: copy sub-dir test scripts for make O=dir run
selftests: lib.mk: copy test scripts and test files for make O=dir run
selftests: sync: kselftest and kselftest-clean fail for make O=dir case
selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
selftests: lib.mk: fix test executable status check to use full path
selftests: Makefile: clear LDFLAGS for make O=dir use-case
selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
Makefile: kselftest and kselftest-clean fail for make O=dir case
selftests/net: msg_zerocopy enable build with older kernel headers
selftests: actually run the various net selftests
selftest: add a reuseaddr test
...
Linus Torvalds [Wed, 27 Sep 2017 15:33:26 +0000 (08:33 -0700)]
Merge branch 'x86-fpu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fpu fixes and cleanups from Ingo Molnar:
"This is _way_ more cleanups than fixes, but the bugs were subtle and
hard to hit, and the primary reason for them existing was the
unnecessary historical complexity of some of the x86/fpu interfaces.
The first bunch of commits clean up and simplify the xstate user copy
handling functions, in reaction to the collective head-scratching
about the xstate user-copy handling code that leads up to the fix for
this SkyLake xstate handling bug:
0852b374173b: x86/fpu: Add FPU state copying quirk to handle XRSTOR failure on Intel Skylake CPUs
The cleanups don't change any functionality, they just (hopefully)
make it all clearer, more consistent, more debuggable and more robust.
Note that most of the linecount increase comes from these commits,
where we better split the user/kernel copy logic by having more
variants, instead repeated fragile patterns of:
if (kbuf) {
memcpy(kbuf + pos, data, copy);
} else {
if (__copy_to_user(ubuf + pos, data, copy))
return -EFAULT;
}
The next bunch of commits simplify the FPU state-machine to get rid of
old lazy-FPU idiosyncrasies - a defensive simplification to make all
the code easier to review and fix. No change in functionality.
Then there's a couple of additional debugging tweaks: static checker
warning fix and move an FPU related warning to under WARN_ON_FPU(),
followed by another bunch of commits that represent a finegrained
split-up of the fixes from Eric Biggers to handle weird xstate bits
properly.
I did this finegrained split-up because some of these fixes also
impact the ABI for weird xstate handling, for which we'd like to have
good bisection results, should they cause any problems. (We also had
one regression with the more monolithic fixes, so splitting it all up
sounded prudent for robustness reasons as well.)
About the whole series: the commits up to
03eaec81ac09 have been in
-next for months - but I've recently rebased them to remove a state
machine clean-up commit that was objected to, and to make it more
bisectable - so technically it's a new, rebased tree.
Robustness history: this series had some regressions along the way,
and all reported regressions have been fixed. All but one of the
regressions manifested itself as easy to report warnings. The previous
version of this latest series was also in linux-next, with one
(warning-only) regression reported which is fixed in the latest
version.
Barring last minute brown paper bag bugs (and the commits are now
older by a day which I'd hope helps paperbag reduction), I'm
reasonably confident about its general robustness.
Famous last words ..."
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/fpu: Use using_compacted_format() instead of open coded X86_FEATURE_XSAVES
x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_user_to_xstate()
x86/fpu: Eliminate the 'xfeatures' local variable in copy_user_to_xstate()
x86/fpu: Copy the full header in copy_user_to_xstate()
x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_kernel_to_xstate()
x86/fpu: Eliminate the 'xfeatures' local variable in copy_kernel_to_xstate()
x86/fpu: Copy the full state_header in copy_kernel_to_xstate()
x86/fpu: Use validate_xstate_header() to validate the xstate_header in __fpu__restore_sig()
x86/fpu: Use validate_xstate_header() to validate the xstate_header in xstateregs_set()
x86/fpu: Introduce validate_xstate_header()
x86/fpu: Rename fpu__activate_fpstate_read/write() to fpu__prepare_[read|write]()
x86/fpu: Rename fpu__activate_curr() to fpu__initialize()
x86/fpu: Simplify and speed up fpu__copy()
x86/fpu: Fix stale comments about lazy FPU logic
x86/fpu: Rename fpu::fpstate_active to fpu::initialized
x86/fpu: Remove fpu__current_fpstate_write_begin/end()
x86/fpu: Fix fpu__activate_fpstate_read() and update comments
x86/fpu: Reinitialize FPU registers if restoring FPU state fails
x86/fpu: Don't let userspace set bogus xcomp_bv
x86/fpu: Turn WARN_ON() in context switch into WARN_ON_FPU()
...
Jan Kara [Tue, 26 Sep 2017 08:36:05 +0000 (10:36 +0200)]
quota: Fix quota corruption with generic/232 test
Eric has reported that since commit
d2faa415166b "quota: Do not acquire
dqio_sem for dquot overwrites in v2 format" test generic/232
occasionally fails due to quota information being incorrect. Indeed that
commit was too eager to remove dqio_sem completely from the path that
just overwrites quota structure with updated information. Although that
is innocent on its own, another process that inserts new quota structure
to the same block can perform read-modify-write cycle of that block thus
effectively discarding quota information update if they race in a wrong
way.
Fix the problem by acquiring dqio_sem for reading for overwrites of
quota structure. Note that it *is* possible to completely avoid taking
dqio_sem in the overwrite path however that will require modifying path
inserting / deleting quota structures to avoid RMW cycles of the full
block and for now it is not clear whether it is worth the hassle.
Fixes:
d2faa415166b2883428efa92f451774ef44373ac
Reported-and-tested-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Linus Torvalds [Tue, 26 Sep 2017 23:54:22 +0000 (16:54 -0700)]
Merge tag 'mmc-v4.14-rc1' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- sdhci-pci: Fix voltage switch for some Intel host controllers
- tmio: remove broken and noisy debug macro
* tag 'mmc-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci: Fix voltage switch for some Intel host controllers
mmc: tmio: remove broken and noisy debug macro
Andreas Gruenbacher [Mon, 25 Sep 2017 10:23:03 +0000 (12:23 +0200)]
vfs: Return -ENXIO for negative SEEK_HOLE / SEEK_DATA offsets
In generic_file_llseek_size, return -ENXIO for negative offsets as well
as offsets beyond EOF. This affects filesystems which don't implement
SEEK_HOLE / SEEK_DATA internally, possibly because they don't support
holes.
Fixes xfstest generic/448.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ingo Molnar [Tue, 26 Sep 2017 08:17:43 +0000 (10:17 +0200)]
Merge branch 'WIP.x86/fpu' into x86/fpu, because it's ready
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers [Sun, 24 Sep 2017 10:59:13 +0000 (12:59 +0200)]
x86/fpu: Use using_compacted_format() instead of open coded X86_FEATURE_XSAVES
This is the canonical method to use.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-11-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers [Sun, 24 Sep 2017 10:59:12 +0000 (12:59 +0200)]
x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_user_to_xstate()
Tighten the checks in copy_user_to_xstate().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-10-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers [Sun, 24 Sep 2017 10:59:11 +0000 (12:59 +0200)]
x86/fpu: Eliminate the 'xfeatures' local variable in copy_user_to_xstate()
We now have this field in hdr.xfeatures.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-9-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers [Sun, 24 Sep 2017 10:59:10 +0000 (12:59 +0200)]
x86/fpu: Copy the full header in copy_user_to_xstate()
This is in preparation to verify the full xstate header as supplied by user-space.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-8-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers [Sun, 24 Sep 2017 10:59:09 +0000 (12:59 +0200)]
x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_kernel_to_xstate()
Tighten the checks in copy_kernel_to_xstate().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-7-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers [Sun, 24 Sep 2017 10:59:08 +0000 (12:59 +0200)]
x86/fpu: Eliminate the 'xfeatures' local variable in copy_kernel_to_xstate()
We have this information in the xstate_header.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-6-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers [Sun, 24 Sep 2017 10:59:07 +0000 (12:59 +0200)]
x86/fpu: Copy the full state_header in copy_kernel_to_xstate()
This is in preparation to verify the full xstate header as supplied by user-space.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-5-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers [Sun, 24 Sep 2017 10:59:06 +0000 (12:59 +0200)]
x86/fpu: Use validate_xstate_header() to validate the xstate_header in __fpu__restore_sig()
Tighten the checks in __fpu__restore_sig() and update comments.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-4-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers [Sun, 24 Sep 2017 10:59:05 +0000 (12:59 +0200)]
x86/fpu: Use validate_xstate_header() to validate the xstate_header in xstateregs_set()
Tighten the checks in xstateregs_set().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-3-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers [Sun, 24 Sep 2017 10:59:04 +0000 (12:59 +0200)]
x86/fpu: Introduce validate_xstate_header()
Move validation of user-supplied xstate_header into a helper function,
in preparation of calling it from both the ptrace and sigreturn syscall
paths.
The new function also considers it to be an error if *any* reserved bits
are set, whereas before we were just clearing most of them silently.
This should reduce the chance of bugs that fail to correctly validate
user-supplied XSAVE areas. It also will expose any broken userspace
programs that set the other reserved bits; this is desirable because
such programs will lose compatibility with future CPUs and kernels if
those bits are ever used for anything. (There shouldn't be any such
programs, and in fact in the case where the compacted format is in use
we were already validating xfeatures. But you never know...)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-2-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 23 Sep 2017 11:37:45 +0000 (13:37 +0200)]
x86/fpu: Rename fpu__activate_fpstate_read/write() to fpu__prepare_[read|write]()
As per the new nomenclature we don't 'activate' the FPU state
anymore, we initialize it. So drop the _activate_fpstate name
from these functions, which were a bit of a mouthful anyway,
and name them:
fpu__prepare_read()
fpu__prepare_write()
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 23 Sep 2017 13:00:15 +0000 (15:00 +0200)]
x86/fpu: Rename fpu__activate_curr() to fpu__initialize()
Rename this function to better express that it's all about
initializing the FPU state of a task which goes hand in hand
with the fpu::initialized field.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-33-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 23 Sep 2017 13:00:14 +0000 (15:00 +0200)]
x86/fpu: Simplify and speed up fpu__copy()
fpu__copy() has a preempt_disable()/enable() pair, which it had to do to
be able to atomically unlazy the current task when doing an FNSAVE.
But we don't unlazy tasks anymore, we always do direct saves/restores of
FPU context.
So remove both the unnecessary critical section, and update the comments.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-32-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 23 Sep 2017 13:00:13 +0000 (15:00 +0200)]
x86/fpu: Fix stale comments about lazy FPU logic
We don't do any lazy restore anymore, what we have are two pieces of optimization:
- no-FPU tasks that don't save/restore the FPU context (kernel threads are such)
- cached FPU registers maintained via the fpu->last_cpu field. This means that
if an FPU task context switches to a non-FPU task then we can maintain the
FPU registers as an in-FPU copies (cache), and skip the restoration of them
once we switch back to the original FPU-using task.
Update all the comments that still referred to old 'lazy' and 'unlazy' concepts.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-31-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Tue, 26 Sep 2017 07:43:36 +0000 (09:43 +0200)]
x86/fpu: Rename fpu::fpstate_active to fpu::initialized
The x86 FPU code used to have a complex state machine where both the FPU
registers and the FPU state context could be 'active' (or inactive)
independently of each other - which enabled features like lazy FPU restore.
Much of this complexity is gone in the current code: now we basically can
have FPU-less tasks (kernel threads) that don't use (and save/restore) FPU
state at all, plus full FPU users that save/restore directly with no laziness
whatsoever.
But the fpu::fpstate_active still carries bits of the old complexity - meanwhile
this flag has become a simple flag that shows whether the FPU context saving
area in the thread struct is initialized and used, or not.
Rename it to fpu::initialized to express this simplicity in the name as well.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-30-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 23 Sep 2017 13:00:11 +0000 (15:00 +0200)]
x86/fpu: Remove fpu__current_fpstate_write_begin/end()
These functions are not used anymore, so remove them.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-29-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 23 Sep 2017 13:00:10 +0000 (15:00 +0200)]
x86/fpu: Fix fpu__activate_fpstate_read() and update comments
fpu__activate_fpstate_read() can be called for the current task
when coredumping - or for stopped tasks when ptrace-ing.
Implement this properly in the code and update the comments.
This also fixes an incorrect (but harmless) warning introduced by
one of the earlier patches.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-28-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Tue, 26 Sep 2017 01:24:14 +0000 (18:24 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull compat fix from Al Viro:
"I really wish gcc warned about conversions from pointer to function
into void *..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix a typo in put_compat_shm_info()
Al Viro [Tue, 26 Sep 2017 00:38:45 +0000 (20:38 -0400)]
fix a typo in put_compat_shm_info()
"uip" misspelled as "up"; unfortunately, the latter happens to be
a function and gcc is happy to convert it to void *...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Mon, 25 Sep 2017 22:46:04 +0000 (15:46 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two sets of NVMe pull requests from Christoph:
- Fixes for the Fibre Channel host/target to fix spec compliance
- Allow a zero keep alive timeout
- Make the debug printk for broken SGLs work better
- Fix queue zeroing during initialization
- Set of RDMA and FC fixes
- Target div-by-zero fix
- bsg double-free fix.
- ndb unknown ioctl fix from Josef.
- Buffered vs O_DIRECT page cache inconsistency fix. Has been floating
around for a long time, well reviewed. From Lukas.
- brd overflow fix from Mikulas.
- Fix for a loop regression in this merge window, where using a union
for two members of the loop_cmd turned out to be a really bad idea.
From Omar.
- Fix for an iostat regression fix in this series, using the wrong API
to get at the block queue. From Shaohua.
- Fix for a potential blktrace delection deadlock. From Waiman.
* 'for-linus' of git://git.kernel.dk/linux-block: (30 commits)
nvme-fcloop: fix port deletes and callbacks
nvmet-fc: sync header templates with comments
nvmet-fc: ensure target queue id within range.
nvmet-fc: on port remove call put outside lock
nvme-rdma: don't fully stop the controller in error recovery
nvme-rdma: give up reconnect if state change fails
nvme-core: Use nvme_wq to queue async events and fw activation
nvme: fix sqhd reference when admin queue connect fails
block: fix a crash caused by wrong API
fs: Fix page cache inconsistency when mixing buffered and AIO DIO
nvmet: implement valid sqhd values in completions
nvme-fabrics: Allow 0 as KATO value
nvme: allow timed-out ios to retry
nvme: stop aer posting if controller state not live
nvme-pci: Print invalid SGL only once
nvme-pci: initialize queue memory before interrupts
nvmet-fc: fix failing max io queue connections
nvme-fc: use transport-specific sgl format
nvme: add transport SGL definitions
nvme.h: remove FC transport-specific error values
...
Linus Torvalds [Mon, 25 Sep 2017 22:41:56 +0000 (15:41 -0700)]
Merge tag 'gfs2-for-linus-4.14-rc3' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Bob Peterson:
"GFS2: Fix an old regression in GFS2's debugfs interface
This fixes a regression introduced by commit
88ffbf3e037e ("GFS2: Use
resizable hash table for glocks"). The regression caused the glock dump
in debugfs to not report all the glocks, which makes debugging
extremely difficult"
* tag 'gfs2-for-linus-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix debugfs glocks dump
Linus Torvalds [Mon, 25 Sep 2017 22:37:19 +0000 (15:37 -0700)]
Merge tag 'microblaze-4.14-rc3' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze fixes from Michal Simek:
- Kbuild fix
- use vma_pages
- setup default little endians
* tag 'microblaze-4.14-rc3' of git://git.monstr.eu/linux-2.6-microblaze:
arch: change default endian for microblaze
microblaze: Cocci spatch "vma_pages"
microblaze: Add missing kvm_para.h to Kbuild
Linus Torvalds [Mon, 25 Sep 2017 22:22:31 +0000 (15:22 -0700)]
Merge tag 'trace-v4.14-rc1-2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Stack tracing and RCU has been having issues with each other and
lockdep has been pointing out constant problems.
The changes have been going into the stack tracer, but it has been
discovered that the problem isn't with the stack tracer itself, but it
is with calling save_stack_trace() from within the internals of RCU.
The stack tracer is the one that can trigger the issue the easiest,
but examining the problem further, it could also happen from a WARN()
in the wrong place, or even if an NMI happened in this area and it did
an rcu_read_lock().
The critical area is where RCU is not watching. Which can happen while
going to and from idle, or bringing up or taking down a CPU.
The final fix was to put the protection in kernel_text_address() as it
is the one that requires RCU to be watching while doing the stack
trace.
To make this work properly, Paul had to allow rcu_irq_enter() happen
after rcu_nmi_enter(). This should have been done anyway, since an NMI
can page fault (reading vmalloc area), and a page fault triggers
rcu_irq_enter().
One patch is just a consolidation of code so that the fix only needed
to be done in one location"
* tag 'trace-v4.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Remove RCU work arounds from stack tracer
extable: Enable RCU if it is not watching in kernel_text_address()
extable: Consolidate *kernel_text_address() functions
rcu: Allow for page faults in NMI handlers
James Smart [Tue, 19 Sep 2017 21:01:50 +0000 (14:01 -0700)]
nvme-fcloop: fix port deletes and callbacks
Now that there are potentially long delays between when a remoteport or
targetport delete calls is made and when the callback occurs (dev_loss_tmo
timeout), no longer block in the delete routines and move the final nport
puts to the callbacks.
Moved the fcloop_nport_get/put/free routines to avoid forward declarations.
Ensure port_info structs used in registrations are nulled in case fields
are not set (ex: devloss_tmo values).
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Wed, 20 Sep 2017 18:07:26 +0000 (11:07 -0700)]
nvmet-fc: sync header templates with comments
Comments were incorrect:
- defer_rcv was in host port template. moved to target port template
- Added Mandatory statements for target port template items
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Tue, 19 Sep 2017 23:33:56 +0000 (16:33 -0700)]
nvmet-fc: ensure target queue id within range.
When searching for queue id's ensure they are within the expected range.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Tue, 19 Sep 2017 22:13:11 +0000 (15:13 -0700)]
nvmet-fc: on port remove call put outside lock
Avoid calling the put routine, as it may traverse to free routines while
holding the target lock.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Thu, 21 Sep 2017 14:01:38 +0000 (17:01 +0300)]
nvme-rdma: don't fully stop the controller in error recovery
By calling nvme_stop_ctrl on a already failed controller will wait for the
scan work to complete (only by identify timeout expiration which is 60
seconds). This is unnecessary when we already know that the controller has
failed.
Reported-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Thu, 21 Sep 2017 14:01:37 +0000 (17:01 +0300)]
nvme-rdma: give up reconnect if state change fails
If we failed to transition to state LIVE after a successful reconnect,
then controller deletion already started. In this case there is no
point moving forward with reconnect.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Thu, 21 Sep 2017 14:01:36 +0000 (17:01 +0300)]
nvme-core: Use nvme_wq to queue async events and fw activation
async_event_work might race as it is executed from two different
workqueues at the moment.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Thu, 21 Sep 2017 15:13:49 +0000 (08:13 -0700)]
nvme: fix sqhd reference when admin queue connect fails
Fix bug in sqhd patch.
It wasn't the sq that was at risk. In the case where the admin queue
connect command fails, the sq->size field is not set. Therefore, this
becomes a divide by zero error.
Add a quick check to bypass under this failure condition.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Andreas Gruenbacher [Tue, 19 Sep 2017 12:15:35 +0000 (07:15 -0500)]
gfs2: Fix debugfs glocks dump
The switch to rhashtables (commit
88ffbf3e03) broke the debugfs glock
dump (/sys/kernel/debug/gfs2/<device>/glocks) for dumps bigger than a
single buffer: the right function for restarting an rhashtable iteration
from the beginning of the hash table is rhashtable_walk_enter;
rhashtable_walk_stop + rhashtable_walk_start will just resume from the
current position.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # v4.3+
Shuah Khan [Thu, 21 Sep 2017 19:05:18 +0000 (13:05 -0600)]
selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
When timer_create() fails on a bootime or realtime clock, setup_timer()
returns 0 as if timer has been set. Callers wait forever for the timer
to expire.
This hang is seen on a system that doesn't have support for:
CLOCK_REALTIME_ALARM ABSTIME missing CAP_WAKE_ALARM? : [UNSUPPORTED]
Test hangs waiting for a timer that hasn't been set to expire. Fix
setup_timer() to return 1, add handling in callers to detect the
unsupported case and return 0 without waiting to not fail the test.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Shuah Khan [Thu, 21 Sep 2017 19:46:01 +0000 (13:46 -0600)]
selftests: timers: set-timer-lat: fix hang when std out/err are redirected
do_timer_oneshot() uses select() as a timer with FD_SETSIZE and readfs
is cleared with FD_ZERO without FD_SET.
When stdout and stderr are redirected, the test hangs in select forever.
Fix the problem calling select() with readfds empty and nfds zero. This
is sufficient for using select() for timer.
With this fix "./set-timer-lat > /dev/null 2>&1" no longer hangs.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Li Zhijian [Thu, 21 Sep 2017 09:13:27 +0000 (17:13 +0800)]
selftests/memfd: correct run_tests.sh permission
to fix the following issue:
------------------
TAP version 13
selftests: run_tests.sh
========================================
selftests: Warning: file run_tests.sh is not executable, correct this.
not ok 1..1 selftests: run_tests.sh [FAIL]
------------------
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Kees Cook [Thu, 7 Sep 2017 23:32:46 +0000 (16:32 -0700)]
selftests/seccomp: Support glibc 2.26 siginfo_t.h
The 2.26 release of glibc changed how siginfo_t is defined, and the earlier
work-around to using the kernel definition are no longer needed. The old
way needs to stay around for a while, though.
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Shuah Khan [Tue, 19 Sep 2017 00:46:23 +0000 (18:46 -0600)]
selftests: futex: Makefile: fix for loops in targets to run silently
Fix for loops in targets to run silently to avoid cluttering the test
results.
Suppresses the following from targets:
for DIR in functional; do \
BUILD_TARGET=./tools/testing/selftests/futex/$DIR; \
mkdir $BUILD_TARGET -p; \
make OUTPUT=$BUILD_TARGET -C $DIR all;\
done
./tools/testing/selftests/futex/run.sh
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Shuah Khan [Mon, 18 Sep 2017 23:30:50 +0000 (17:30 -0600)]
selftests: Makefile: fix for loops in targets to run silently
Fix for loops in targets to run silently to avoid cluttering the test
results.
Suppresses the following from targets: e.g run from breakpoints
for TARGET in breakpoints; do \
BUILD_TARGET=$BUILD/$TARGET; \
mkdir $BUILD_TARGET -p; \
make OUTPUT=$BUILD_TARGET -C $TARGET;\
done;
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Shuah Khan [Tue, 12 Sep 2017 14:52:13 +0000 (08:52 -0600)]
selftests: mqueue: Use full path to run tests from Makefile
Use full path including $(OUTPUT) to run tests from Makefile for
normal case when objects reside in the source tree as well as when
objects are relocated with make O=dir. In both cases $(OUTPUT) will
be set correctly by lib.mk.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Shuah Khan [Tue, 12 Sep 2017 01:11:07 +0000 (19:11 -0600)]
selftests: futex: copy sub-dir test scripts for make O=dir run
For make O=dir run_tests to work, test scripts from sub-directories
need to be copied over to the object directory. Running tests from the
object directory is necessary to avoid making the source tree dirty.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Shaohua Li [Thu, 21 Sep 2017 19:17:16 +0000 (12:17 -0700)]
block: fix a crash caused by wrong API
part_stat_show takes a part device not a disk, so we should use
part_to_disk.
Fixes:
d62e26b3ffd2("block: pass in queue to inflight accounting")
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lukas Czerner [Thu, 21 Sep 2017 14:16:29 +0000 (08:16 -0600)]
fs: Fix page cache inconsistency when mixing buffered and AIO DIO
Currently when mixing buffered reads and asynchronous direct writes it
is possible to end up with the situation where we have stale data in the
page cache while the new data is already written to disk. This is
permanent until the affected pages are flushed away. Despite the fact
that mixing buffered and direct IO is ill-advised it does pose a thread
for a data integrity, is unexpected and should be fixed.
Fix this by deferring completion of asynchronous direct writes to a
process context in the case that there are mapped pages to be found in
the inode. Later before the completion in dio_complete() invalidate
the pages in question. This ensures that after the completion the pages
in the written area are either unmapped, or populated with up-to-date
data. Also do the same for the iomap case which uses
iomap_dio_complete() instead.
This has a side effect of deferring the completion to a process context
for every AIO DIO that happens on inode that has pages mapped. However
since the consensus is that this is ill-advised practice the performance
implication should not be a problem.
This was based on proposal from Jeff Moyer, thanks!
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Mon, 18 Sep 2017 16:08:29 +0000 (09:08 -0700)]
nvmet: implement valid sqhd values in completions
To support sqhd, for initiators that are following the spec and
paying attention to sqhd vs their sqtail values:
- add sqhd to struct nvmet_sq
- initialize sqhd to 0 in nvmet_sq_setup
- rather than propagate the 0's-based qsize value from the connect message
which requires a +1 in every sqhd update, and as nothing else references
it, convert to 1's-based value in nvmt_sq/cq_setup() calls.
- validate connect message sqsize being non-zero per spec.
- updated assign sqhd for every completion that goes back.
Also remove handling the NULL sq case in __nvmet_req_complete, as it can't
happen with the current code.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Guilherme G. Piccoli [Thu, 14 Sep 2017 16:59:28 +0000 (13:59 -0300)]
nvme-fabrics: Allow 0 as KATO value
Currently, driver code allows user to set 0 as KATO
(Keep Alive TimeOut), but this is not being respected.
This patch enforces the expected behavior.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Thu, 7 Sep 2017 20:18:04 +0000 (13:18 -0700)]
nvme: allow timed-out ios to retry
Currently the nvme_req_needs_retry() applies several checks to see if
a retry is allowed. On of those is whether the current time has exceeded
the start time of the io plus the timeout length. This check, if an io
times out, means there is never a retry allowed for the io. Which means
applications see the io failure.
Remove this check and allow the io to timeout, like it does on other
protocols, and retries to be made.
On the FC transport, a frame can be lost for an individual io, and there
may be no other errors that escalate for the connection/association.
The io will timeout, which causes the transport to escalate into creating
a new association, but the io that timed out, due to this retry logic, has
already failed back to the application and things are hosed.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Thu, 14 Sep 2017 18:03:09 +0000 (11:03 -0700)]
nvme: stop aer posting if controller state not live
If an nvme async_event command completes, in most cases, a new
async event is posted. However, if the controller enters a
resetting or reconnecting state, there is nothing to block the
scheduled work element from posting the async event again. Nor are
there calls from the transport to stop async events when an
association dies.
In the case of FC, where the association is torn down, the aer must
be aborted on the FC link and completes through the normal job
completion path. Thus the terminated async event ends up being
rescheduled even though the controller isn't in a valid state for
the aer, and the reposting gets the transport into a partially torn
down data structure.
It's possible to hit the scenario on rdma, although much less likely
due to an aer completing right as the association is terminated and
as the association teardown reclaims the blk requests via
nvme_cancel_request() so its immediate, not a link-related action
like on FC.
Fix by putting controller state checks in both the async event
completion routine where it schedules the async event and in the
async event work routine before it calls into the transport. It's
effectively a "stop_async_events()" behavior. The transport, when
it creates a new association with the subsystem will transition
the state back to live and is already restarting the async event
posting.
Signed-off-by: James Smart <james.smart@broadcom.com>
[hch: remove taking a lock over reading the controller state]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Fri, 15 Sep 2017 17:05:38 +0000 (13:05 -0400)]
nvme-pci: Print invalid SGL only once
The WARN_ONCE macro returns true if the condition is true, not if the
warn was raised, so we're printing the scatter list every time it's
invalid. This is excessive and makes debugging harder, so this patch
prints it just once.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 14 Sep 2017 17:54:39 +0000 (13:54 -0400)]
nvme-pci: initialize queue memory before interrupts
A spurious interrupt before the nvme driver has initialized the completion
queue may inadvertently cause the driver to believe it has a completion
to process. This may result in a NULL dereference since the nvmeq's tags
are not set at this point.
The patch initializes the host's CQ memory so that a spurious interrupt
isn't mistaken for a real completion.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Mon, 11 Sep 2017 23:16:53 +0000 (16:16 -0700)]
nvmet-fc: fix failing max io queue connections
fc transport is treating NVMET_NR_QUEUES as maximum queue count, e.g.
admin queue plus NVMET_NR_QUEUES-1 io queues. But NVMET_NR_QUEUES is
the number of io queues, so maximum queue count is really
NVMET_NR_QUEUES+1.
Fix the handling in the target fc transport
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Thu, 7 Sep 2017 20:20:24 +0000 (13:20 -0700)]
nvme-fc: use transport-specific sgl format
Sync with NVM Express spec change and FC-NVME 1.18.
FC transport sets SGL type to Transport SGL Data Block Descriptor and
subtype to transport-specific value 0x0A.
Removed the warn-on's on the PRP fields. They are unneeded. They were
to check for values from the upper layer that weren't set right, and
for the most part were fine. But, with Async events, which reuse the
same structure and 2nd time issued the SGL overlay converted them to
the Transport SGL values - the warn-on's were errantly firing.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Thu, 7 Sep 2017 20:20:23 +0000 (13:20 -0700)]
nvme: add transport SGL definitions
Add transport SGL defintions from NVMe TP 4008, required for
the final NVMe-FC standard.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Thu, 7 Sep 2017 23:27:25 +0000 (16:27 -0700)]
nvme.h: remove FC transport-specific error values
The NVM express group recinded the reserved range for the transport.
Remove the FC-centric values that had been defined.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Thu, 14 Sep 2017 18:30:15 +0000 (11:30 -0700)]
qla2xxx: remove use of FC-specific error codes
The qla2xxx driver uses the FC-specific error when it needed to return an
error to the FC-NVME transport. Convert to use a generic value instead.
Signed-off-by: James Smart <james.smart@broadcom.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Thu, 7 Sep 2017 23:27:29 +0000 (16:27 -0700)]
lpfc: remove use of FC-specific error codes
The lpfc driver uses the FC-specific error when it needed to return an
error to the FC-NVME transport. Convert to use a generic value instead.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Thu, 7 Sep 2017 23:27:28 +0000 (16:27 -0700)]
nvmet-fcloop: remove use of FC-specific error codes
The FC-NVME transport loopback test module used the FC-specific error
codes in cases where it emulated a transport abort case. Instead of
using the FC-specific values, now use a generic value (NVME_SC_INTERNAL).
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Thu, 7 Sep 2017 23:27:27 +0000 (16:27 -0700)]
nvmet-fc: remove use of FC-specific error codes
The FC-NVME target transport used the FC-specific error codes in
return codes when the transport or lldd failed. Instead of using the
FC-specific values, now use a generic value (NVME_SC_INTERNAL).
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Thu, 7 Sep 2017 23:27:26 +0000 (16:27 -0700)]
nvme-fc: remove use of FC-specific error codes
The FC-NVME transport used the FC-specific error codes in cases where
it had to fabricate an error to go back up stack. Instead of using the
FC-specific values, now use a generic value (NVME_SC_INTERNAL).
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Omar Sandoval [Wed, 20 Sep 2017 21:24:34 +0000 (14:24 -0700)]
loop: remove union of use_aio and ref in struct loop_cmd
When the request is completed, lo_complete_rq() checks cmd->use_aio.
However, if this is in fact an aio request, cmd->use_aio will have
already been reused as cmd->ref by lo_rw_aio*. Fix it by not using a
union. On x86_64, there's a hole after the union anyways, so this
doesn't make struct loop_cmd any bigger.
Fixes:
92d773324b7e ("block/loop: fix use after free")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Waiman Long [Wed, 20 Sep 2017 19:12:20 +0000 (13:12 -0600)]
blktrace: Fix potential deadlock between delete & sysfs ops
The lockdep code had reported the following unsafe locking scenario:
CPU0 CPU1
---- ----
lock(s_active#228);
lock(&bdev->bd_mutex/1);
lock(s_active#228);
lock(&bdev->bd_mutex);
*** DEADLOCK ***
The deadlock may happen when one task (CPU1) is trying to delete a
partition in a block device and another task (CPU0) is accessing
tracing sysfs file (e.g. /sys/block/dm-1/trace/act_mask) in that
partition.
The s_active isn't an actual lock. It is a reference count (kn->count)
on the sysfs (kernfs) file. Removal of a sysfs file, however, require
a wait until all the references are gone. The reference count is
treated like a rwsem using lockdep instrumentation code.
The fact that a thread is in the sysfs callback method or in the
ioctl call means there is a reference to the opended sysfs or device
file. That should prevent the underlying block structure from being
removed.
Instead of using bd_mutex in the block_device structure, a new
blk_trace_mutex is now added to the request_queue structure to protect
access to the blk_trace structure.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix typo in patch subject line, and prune a comment detailing how
the code used to work.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Josef Bacik [Sat, 6 May 2017 02:25:18 +0000 (22:25 -0400)]
nbd: ignore non-nbd ioctl's
In testing we noticed that nbd would spew if you ran a fio job against
the raw device itself. This is because fio calls a block device
specific ioctl, however the block layer will first pass this back to the
driver ioctl handler in case the driver wants to do something special.
Since the device was setup using netlink this caused us to spew every
time fio called this ioctl. Since we don't have special handling, just
error out for any non-nbd specific ioctl's that come in. This fixes the
spew.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Thu, 7 Sep 2017 11:54:35 +0000 (13:54 +0200)]
bsg-lib: don't free job in bsg_prepare_job
The job structure is allocated as part of the request, so we should not
free it in the error path of bsg_prepare_job.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mikulas Patocka [Wed, 13 Sep 2017 13:17:57 +0000 (09:17 -0400)]
brd: fix overflow in __brd_direct_access
The code in __brd_direct_access multiplies the pgoff variable by page size
and divides it by 512. It can cause overflow on 32-bit architectures. The
overflow happens if we create ramdisk larger than 4G and use it as a
sparse device.
This patch replaces multiplication and division with multiplication by the
number of sectors per page.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes:
1647b9b959c7 ("brd: add dax_operations support")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Babu Moger [Mon, 18 Sep 2017 16:53:29 +0000 (10:53 -0600)]
arch: change default endian for microblaze
Fix the default for microblaze. Michal Simek mentioned default for
microblaze should be CPU_LITTLE_ENDIAN.
Fixes : commit
206d3642d8ee ("arch/microblaze: add choice for endianness
and update Makefile")
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Thomas Meyer [Wed, 20 Sep 2017 22:29:36 +0000 (00:29 +0200)]
microblaze: Cocci spatch "vma_pages"
Use vma_pages function on vma object instead of explicit computation.
Found by coccinelle spatch "api/vma_pages.cocci"
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 19 Sep 2017 14:40:21 +0000 (16:40 +0200)]
microblaze: Add missing kvm_para.h to Kbuild
Running make allmodconfig;make is throwing compilation error:
CC kernel/watchdog.o
In file included from ./include/linux/kvm_para.h:4:0,
from kernel/watchdog.c:29:
./include/uapi/linux/kvm_para.h:32:26: fatal error: asm/kvm_para.h: No
such file or directory
#include <asm/kvm_para.h>
^
compilation terminated.
make[1]: *** [kernel/watchdog.o] Error 1
make: *** [kernel/watchdog.o] Error 2
Reported-by: Michal Hocko <mhocko@kernel.org>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Fixes:
83f0124ad81e87b ("microblaze: remove asm-generic wrapper headers")
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Tested-by: Michal Hocko <mhocko@suse.com>
Eric Biggers [Sat, 23 Sep 2017 13:00:09 +0000 (15:00 +0200)]
x86/fpu: Reinitialize FPU registers if restoring FPU state fails
Userspace can change the FPU state of a task using the ptrace() or
rt_sigreturn() system calls. Because reserved bits in the FPU state can
cause the XRSTOR instruction to fail, the kernel has to carefully
validate that no reserved bits or other invalid values are being set.
Unfortunately, there have been bugs in this validation code. For
example, we were not checking that the 'xcomp_bv' field in the
xstate_header was 0. As-is, such bugs are exploitable to read the FPU
registers of other processes on the system. To do so, an attacker can
create a task, assign to it an invalid FPU state, then spin in a loop
and monitor the values of the FPU registers. Because the task's FPU
registers are not being restored, sometimes the FPU registers will have
the values from another process.
This is likely to continue to be a problem in the future because the
validation done by the CPU instructions like XRSTOR is not immediately
visible to kernel developers. Nor will invalid FPU states ever be
encountered during ordinary use --- they will only be seen during
fuzzing or exploits. There can even be reserved bits outside the
xstate_header which are easy to forget about. For example, the MXCSR
register contains reserved bits, which were not validated by the
KVM_SET_XSAVE ioctl until commit
a575813bfe4b ("KVM: x86: Fix load
damaged SSEx MXCSR register").
Therefore, mitigate this class of vulnerability by restoring the FPU
registers from init_fpstate if restoring from the task's state fails.
We actually used to do this, but it was (perhaps unwisely) removed by
commit
9ccc27a5d297 ("x86/fpu: Remove error return values from
copy_kernel_to_*regs() functions"). This new patch is also a bit
different. First, it only clears the registers, not also the bad
in-memory state; this is simpler and makes it easier to make the
mitigation cover all callers of __copy_kernel_to_fpregs(). Second, it
does the register clearing in an exception handler so that no extra
instructions are added to context switches. In fact, we *remove*
instructions, since previously we were always zeroing the register
containing 'err' even if CONFIG_X86_DEBUG_FPU was disabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170922174156.16780-4-ebiggers3@gmail.com
Link: http://lkml.kernel.org/r/20170923130016.21448-27-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers [Sat, 23 Sep 2017 13:00:07 +0000 (15:00 +0200)]
x86/fpu: Don't let userspace set bogus xcomp_bv
On x86, userspace can use the ptrace() or rt_sigreturn() system calls to
set a task's extended state (xstate) or "FPU" registers. ptrace() can
set them for another task using the PTRACE_SETREGSET request with
NT_X86_XSTATE, while rt_sigreturn() can set them for the current task.
In either case, registers can be set to any value, but the kernel
assumes that the XSAVE area itself remains valid in the sense that the
CPU can restore it.
However, in the case where the kernel is using the uncompacted xstate
format (which it does whenever the XSAVES instruction is unavailable),
it was possible for userspace to set the xcomp_bv field in the
xstate_header to an arbitrary value. However, all bits in that field
are reserved in the uncompacted case, so when switching to a task with
nonzero xcomp_bv, the XRSTOR instruction failed with a #GP fault. This
caused the WARN_ON_FPU(err) in copy_kernel_to_xregs() to be hit. In
addition, since the error is otherwise ignored, the FPU registers from
the task previously executing on the CPU were leaked.
Fix the bug by checking that the user-supplied value of xcomp_bv is 0 in
the uncompacted case, and returning an error otherwise.
The reason for validating xcomp_bv rather than simply overwriting it
with 0 is that we want userspace to see an error if it (incorrectly)
provides an XSAVE area in compacted format rather than in uncompacted
format.
Note that as before, in case of error we clear the task's FPU state.
This is perhaps non-ideal, especially for PTRACE_SETREGSET; it might be
better to return an error before changing anything. But it seems the
"clear on error" behavior is fine for now, and it's a little tricky to
do otherwise because it would mean we couldn't simply copy the full
userspace state into kernel memory in one __copy_from_user().
This bug was found by syzkaller, which hit the above-mentioned
WARN_ON_FPU():
WARNING: CPU: 1 PID: 0 at ./arch/x86/include/asm/fpu/internal.h:373 __switch_to+0x5b5/0x5d0
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.13.0 #453
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task:
ffff9ba2bc8e42c0 task.stack:
ffffa78cc036c000
RIP: 0010:__switch_to+0x5b5/0x5d0
RSP: 0000:
ffffa78cc08bbb88 EFLAGS:
00010082
RAX:
00000000fffffffe RBX:
ffff9ba2b8bf2180 RCX:
00000000c0000100
RDX:
00000000ffffffff RSI:
000000005cb10700 RDI:
ffff9ba2b8bf36c0
RBP:
ffffa78cc08bbbd0 R08:
00000000929fdf46 R09:
0000000000000001
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff9ba2bc8e42c0
R13:
0000000000000000 R14:
ffff9ba2b8bf3680 R15:
ffff9ba2bf5d7b40
FS:
00007f7e5cb10700(0000) GS:
ffff9ba2bf400000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000004005cc CR3:
0000000079fd5000 CR4:
00000000001406e0
Call Trace:
Code: 84 00 00 00 00 00 e9 11 fd ff ff 0f ff 66 0f 1f 84 00 00 00 00 00 e9 e7 fa ff ff 0f ff 66 0f 1f 84 00 00 00 00 00 e9 c2 fa ff ff <0f> ff 66 0f 1f 84 00 00 00 00 00 e9 d4 fc ff ff 66 66 2e 0f 1f
Here is a C reproducer. The expected behavior is that the program spin
forever with no output. However, on a buggy kernel running on a
processor with the "xsave" feature but without the "xsaves" feature
(e.g. Sandy Bridge through Broadwell for Intel), within a second or two
the program reports that the xmm registers were corrupted, i.e. were not
restored correctly. With CONFIG_X86_DEBUG_FPU=y it also hits the above
kernel warning.
#define _GNU_SOURCE
#include <stdbool.h>
#include <inttypes.h>
#include <linux/elf.h>
#include <stdio.h>
#include <sys/ptrace.h>
#include <sys/uio.h>
#include <sys/wait.h>
#include <unistd.h>
int main(void)
{
int pid = fork();
uint64_t xstate[512];
struct iovec iov = { .iov_base = xstate, .iov_len = sizeof(xstate) };
if (pid == 0) {
bool tracee = true;
for (int i = 0; i < sysconf(_SC_NPROCESSORS_ONLN) && tracee; i++)
tracee = (fork() != 0);
uint32_t xmm0[4] = { [0 ... 3] = tracee ? 0x00000000 : 0xDEADBEEF };
asm volatile(" movdqu %0, %%xmm0\n"
" mov %0, %%rbx\n"
"1: movdqu %%xmm0, %0\n"
" mov %0, %%rax\n"
" cmp %%rax, %%rbx\n"
" je 1b\n"
: "+m" (xmm0) : : "rax", "rbx", "xmm0");
printf("BUG: xmm registers corrupted! tracee=%d, xmm0=%08X%08X%08X%08X\n",
tracee, xmm0[0], xmm0[1], xmm0[2], xmm0[3]);
} else {
usleep(100000);
ptrace(PTRACE_ATTACH, pid, 0, 0);
wait(NULL);
ptrace(PTRACE_GETREGSET, pid, NT_X86_XSTATE, &iov);
xstate[65] = -1;
ptrace(PTRACE_SETREGSET, pid, NT_X86_XSTATE, &iov);
ptrace(PTRACE_CONT, pid, 0, 0);
wait(NULL);
}
return 1;
}
Note: the program only tests for the bug using the ptrace() system call.
The bug can also be reproduced using the rt_sigreturn() system call, but
only when called from a 32-bit program, since for 64-bit programs the
kernel restores the FPU state from the signal frame by doing XRSTOR
directly from userspace memory (with proper error checking).
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org> [v3.17+]
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Fixes:
0b29643a5843 ("x86/xsaves: Change compacted format xsave area header")
Link: http://lkml.kernel.org/r/20170922174156.16780-2-ebiggers3@gmail.com
Link: http://lkml.kernel.org/r/20170923130016.21448-25-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sun, 24 Sep 2017 23:38:56 +0000 (16:38 -0700)]
Linux 4.14-rc2
Linus Torvalds [Sun, 24 Sep 2017 23:04:12 +0000 (16:04 -0700)]
Merge tag 'devicetree-fixes-for-4.14' of git://git./linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- fix build for !OF providing empty of_find_device_by_node
- fix Abracon vendor prefix
- sync dtx_diff include paths (again)
- a stm32h7 clock binding doc fix
* tag 'devicetree-fixes-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: clk: stm32h7: fix clock-cell size
scripts/dtc: dtx_diff - 2nd update of include dts paths to match build
dt-bindings: fix vendor prefix for Abracon
of: provide inline helper for of_find_device_by_node
Linus Torvalds [Sun, 24 Sep 2017 19:33:58 +0000 (12:33 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Another round of CR3/PCID related fixes (I think this addresses all
but one of the known problems with PCID support), an objtool fix plus
a Clang fix that (finally) solves all Clang quirks to build a bootable
x86 kernel as-is"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Fix inline asm call constraints for Clang
objtool: Handle another GCC stack pointer adjustment bug
x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs
x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier
x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code
x86/mm: Factor out CR3-building code
Linus Torvalds [Sun, 24 Sep 2017 19:28:55 +0000 (12:28 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"A clocksource driver section mismatch fix"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/integrator: Fix section mismatch warning
Linus Torvalds [Sun, 24 Sep 2017 18:57:07 +0000 (11:57 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Three irqchip driver fixes, and an affinity mask helper function bug
fix affecting x86"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "genirq: Restrict effective affinity to interrupts actually using it"
irqchip.mips-gic: Fix shared interrupt mask writes
irqchip/gic-v4: Fix building with ancient gcc
irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()
Linus Torvalds [Sun, 24 Sep 2017 18:53:13 +0000 (11:53 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull address-limit checking fixes from Ingo Molnar:
"This fixes a number of bugs in the address-limit (USER_DS) checks that
got introduced in the merge window, (mostly) affecting the ARM and
ARM64 platforms"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/syscalls: Move address limit check in loop
arm/syscalls: Optimize address limit check
Revert "arm/syscalls: Check address limit on user-mode return"
syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_check
Linus Torvalds [Sun, 24 Sep 2017 18:40:41 +0000 (11:40 -0700)]
Merge branch 'next-general' of git://git./linux/kernel/git/jmorris/linux-security
Pull misc security layer update from James Morris:
"This is the remaining 'general' change in the security tree for v4.14,
following the direct merging of SELinux (+ TOMOYO), AppArmor, and
seccomp.
That's everything now for the security tree except IMA, which will
follow shortly (I've been traveling for the past week with patchy
internet)"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: fix description of values returned by cap_inode_need_killpriv
Linus Torvalds [Sun, 24 Sep 2017 18:34:28 +0000 (11:34 -0700)]
Merge branch 'next-tpm' of git://git./linux/kernel/git/jmorris/linux-security
Pull TPM updates from James Morris:
"Here are the TPM updates from Jarkko for v4.14, which I've placed in
their own branch (next-tpm). I ended up cherry-picking them as other
changes had been made in Jarkko's branch after he sent me his original
pull request.
I plan on maintaining a separate branch for TPM (and other security
subsystems) from now on.
From Jarkko: 'Not much this time except a few fixes'"
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm: ibmvtpm: simplify crq initialization and document crq format
tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers
Documentation: tpm: add powered-while-suspended binding documentation
tpm: tpm_crb: constify acpi_device_id.
tpm: vtpm: constify vio_device_id
Andi Kleen [Sat, 23 Sep 2017 13:00:06 +0000 (15:00 +0200)]
x86/fpu: Turn WARN_ON() in context switch into WARN_ON_FPU()
copy_xregs_to_kernel checks if the alternatives have been already
patched.
This WARN_ON() is always executed in every context switch.
All the other checks in fpu internal.h are WARN_ON_FPU(), but
this one is plain WARN_ON(). I assume it was forgotten to switch it.
So switch it to WARN_ON_FPU() too to avoid some unnecessary code
in the context switch, and a potentially expensive cache line miss for the
global variable.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170329062605.4970-1-andi@firstfloor.org
Link: http://lkml.kernel.org/r/20170923130016.21448-24-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
kbuild test robot [Sat, 23 Sep 2017 13:00:05 +0000 (15:00 +0200)]
x86/fpu: Fix boolreturn.cocci warnings
arch/x86/kernel/fpu/xstate.c:931:9-10: WARNING: return of 0/1 in function 'xfeatures_mxcsr_quirk' with return type bool
Return statements in functions returning bool should use true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Link: http://lkml.kernel.org/r/20170306004553.GA25764@lkp-wsm-ep1
Link: http://lkml.kernel.org/r/20170923130016.21448-23-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rik van Riel [Sat, 23 Sep 2017 13:00:04 +0000 (15:00 +0200)]
x86/fpu: Add FPU state copying quirk to handle XRSTOR failure on Intel Skylake CPUs
On Skylake CPUs I noticed that XRSTOR is unable to deal with states
created by copyout_from_xsaves() if the xstate has only SSE/YMM state, and
no FP state. That is, xfeatures had XFEATURE_MASK_SSE set, but not
XFEATURE_MASK_FP.
The reason is that part of the SSE/YMM state lives in the MXCSR and
MXCSR_FLAGS fields of the FP state.
Ensure that whenever we copy SSE or YMM state around, the MXCSR and
MXCSR_FLAGS fields are also copied around.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170210085445.0f1cc708@annuminas.surriel.com
Link: http://lkml.kernel.org/r/20170923130016.21448-22-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 23 Sep 2017 13:00:03 +0000 (15:00 +0200)]
x86/fpu: Remove struct fpu::fpregs_active
The previous changes paved the way for the removal of the
fpu::fpregs_active state flag - we now only have the
fpu::fpstate_active and fpu::last_cpu fields left.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-21-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 23 Sep 2017 13:00:02 +0000 (15:00 +0200)]
x86/fpu: Decouple fpregs_activate()/fpregs_deactivate() from fpu->fpregs_active
The fpregs_activate()/fpregs_deactivate() are currently called in such a pattern:
if (!fpu->fpregs_active)
fpregs_activate(fpu);
...
if (fpu->fpregs_active)
fpregs_deactivate(fpu);
But note that it's actually safe to call them without checking the flag first.
This further decouples the fpu->fpregs_active flag from actual FPU logic.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-20-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 23 Sep 2017 13:00:01 +0000 (15:00 +0200)]
x86/fpu: Change fpu->fpregs_active users to fpu->fpstate_active
We want to simplify the FPU state machine by eliminating fpu->fpregs_active,
and we can do that because the two state flags (::fpregs_active and
::fpstate_active) are set essentially together.
The old lazy FPU switching code used to make a distinction - but there's
no lazy switching code anymore, we always switch in an 'eager' fashion.
Do this by first changing all substantial uses of fpu->fpregs_active
to fpu->fpstate_active and adding a few debug checks to double check
our assumption is correct.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-19-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 23 Sep 2017 13:00:00 +0000 (15:00 +0200)]
x86/fpu: Split the state handling in fpu__drop()
Prepare fpu__drop() to use fpu->fpregs_active.
There are two distinct usecases for fpu__drop() in this context:
exit_thread() when called for 'current' in exit(), and when called
for another task in fork().
This patch does not change behavior, it only adds a couple of
debug checks and structures the code to make the ->fpregs_active
change more obviously correct.
All the complications will be removed later on.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-18-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>