git.osdn.net Git - tomoyo/tomoyo-test1.git/log

genetlink: fix kdoc warnings

Address a bunch of kdoc warnings:

include/net/genetlink.h:81: warning: Function parameter or member 'module' not described in 'genl_family'
include/net/genetlink.h:243: warning: expecting prototype for struct genl_info. Prototype was for struct genl_dumpit_info instead
include/net/genetlink.h:419: warning: Function parameter or member 'net' not described in 'genlmsg_unicast'
include/net/genetlink.h:438: warning: expecting prototype for gennlmsg_data(). Prototype was for genlmsg_data() instead
include/net/genetlink.h:244: warning: Function parameter or member 'op' not described in 'genl_dumpit_info'

Link: https://lore.kernel.org/r/20221018231310.1040482-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'qdisc-ingress-success'

Paul Blakey says:

====================
net: Fix return value of qdisc ingress handling on success

Fix patch + self-test with the currently broken scenario.

v4->v3:
  Removed new line in self test and rebase (Paolo).

v2->v3:
  Added DROP return to TC_ACT_SHOT case (Cong).

v1->v2:
  Changed blamed commit
  Added self-test
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: add selftest for chaining of tc ingress handling to egress

This test runs a simple ingress tc setup between two veth pairs,
then adds a egress->ingress rule to test the chaining of tc ingress
pipeline to tc egress piepline.

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Fix return value of qdisc ingress handling on success

Currently qdisc ingress handling (sch_handle_ingress()) doesn't
set a return value and it is left to the old return value of
the caller (__netif_receive_skb_core()) which is RX drop, so if
the packet is consumed, caller will stop and return this value
as if the packet was dropped.

This causes a problem in the kernel tcp stack when having a
egress tc rule forwarding to a ingress tc rule.
The tcp stack sending packets on the device having the egress rule
will see the packets as not successfully transmitted (although they
actually were), will not advance it's internal state of sent data,
and packets returning on such tcp stream will be dropped by the tcp
stack with reason ack-of-unsent-data. See reproduction in [0] below.

Fix that by setting the return value to RX success if
the packet was handled successfully.

[0] Reproduction steps:
$ ip link add veth1 type veth peer name peer1
$ ip link add veth2 type veth peer name peer2
$ ifconfig peer1 5.5.5.6/24 up
$ ip netns add ns0
$ ip link set dev peer2 netns ns0
$ ip netns exec ns0 ifconfig peer2 5.5.5.5/24 up
$ ifconfig veth2 0 up
$ ifconfig veth1 0 up

#ingress forwarding veth1 <-> veth2
$ tc qdisc add dev veth2 ingress
$ tc qdisc add dev veth1 ingress
$ tc filter add dev veth2 ingress prio 1 proto all flower \
   action mirred egress redirect dev veth1
$ tc filter add dev veth1 ingress prio 1 proto all flower \
   action mirred egress redirect dev veth2

#steal packet from peer1 egress to veth2 ingress, bypassing the veth pipe
$ tc qdisc add dev peer1 clsact
$ tc filter add dev peer1 egress prio 20 proto ip flower \
   action mirred ingress redirect dev veth1

#run iperf and see connection not running
$ iperf3 -s&
$ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1

#delete egress rule, and run again, now should work
$ tc filter del dev peer1 egress
$ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1

Fixes: f697c3e8b35c ("[NET]: Avoid unnecessary cloning for ingress filtering")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'qdisc-null-deref'

Zhengchao Shao says:

====================
net: fix null pointer access issue in qdisc

These three patches fix the same type of problem. Set the default qdisc,
and then construct an init failure scenario when the dev qdisc is
configured on mqprio to trigger the reset process. NULL pointer access
may occur during the reset process.

---
v2: for fq_codel, revert the patch
---
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: sfb: fix null pointer access issue when sfb_init() fails

When the default qdisc is sfb, if the qdisc of dev_queue fails to be
inited during mqprio_init(), sfb_reset() is invoked to clear resources.
In this case, the q->qdisc is NULL, and it will cause gpf issue.

The process is as follows:
qdisc_create_dflt()
sfb_init()
tcf_block_get() --->failed, q->qdisc is NULL
...
qdisc_put()
...
sfb_reset()
qdisc_reset(q->qdisc) --->q->qdisc is NULL
ops = qdisc->ops

The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
RIP: 0010:qdisc_reset+0x2b/0x6f0
Call Trace:
<TASK>
sfb_reset+0x37/0xd0
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f2164122d04
</TASK>

Fixes: e13e02a3c68d ("net_sched: SFB flow scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()"

This reverts commit 494f5063b86cd6e972cb41a27e083c9a3664319d.

When the default qdisc is fq_codel, if the qdisc of dev_queue fails to be
inited during mqprio_init(), fq_codel_reset() is invoked to clear
resources. In this case, the flow is NULL, and it will cause gpf issue.

The process is as follows:
qdisc_create_dflt()
fq_codel_init()
...
q->flows_cnt = 1024;
...
q->flows = kvcalloc(...) --->failed, q->flows is NULL
...
qdisc_put()
...
fq_codel_reset()
...
flow = q->flows + i --->q->flows is NULL

The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fq_codel_reset+0x14d/0x350
Call Trace:
<TASK>
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fd272b22d04
</TASK>

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: cake: fix null pointer access issue when cake_init() fails

When the default qdisc is cake, if the qdisc of dev_queue fails to be
inited during mqprio_init(), cake_reset() is invoked to clear
resources. In this case, the tins is NULL, and it will cause gpf issue.

The process is as follows:
qdisc_create_dflt()
cake_init()
q->tins = kvcalloc(...) --->failed, q->tins is NULL
...
qdisc_put()
...
cake_reset()
...
cake_dequeue_one()
b = &q->tins[...] --->q->tins is NULL

The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:cake_dequeue_one+0xc9/0x3c0
Call Trace:
<TASK>
cake_reset+0xb1/0x140
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f89e5122d04
</TASK>

Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethernet: marvell: octeontx2 Fix resource not freed after malloc

fix rxsc and txsc not getting freed before going out of scope

Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Manank Patel <pmanank200502@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: catch NULL pointer issue on reconfig

It's possible that the driver will dereference a qcq that doesn't exist
when calling ionic_reconfigure_queues(), which causes a page fault BUG.

If a reduction in the number of queues is followed by a different
reconfig such as changing the ring size, the driver can hit a NULL
pointer when trying to clean up non-existent queues.

Fix this by checking to make sure both the qcqs array and qcq entry
exists bofore trying to use and free the entry.

Fixes: 101b40a0171f ("ionic: change queue count with no reset")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20221017233123.15869-1-snelson@pensando.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hsr: avoid possible NULL deref in skb_clone()

syzbot got a crash [1] in skb_clone(), caused by a bug
in hsr_get_untagged_frame().

When/if create_stripped_skb_hsr() returns NULL, we must
not attempt to call skb_clone().

While we are at it, replace a WARN_ONCE() by netdev_warn_once().

[1]
general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 1 PID: 754 Comm: syz-executor.0 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
RIP: 0010:skb_clone+0x108/0x3c0 net/core/skbuff.c:1641
Code: 93 02 00 00 49 83 7c 24 28 00 0f 85 e9 00 00 00 e8 5d 4a 29 fa 4c 8d 75 7e 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 4c 89 f2 83 e2 07 38 d0 7f 08 84 c0 0f 85 9e 01 00 00
RSP: 0018:ffffc90003ccf4e0 EFLAGS: 00010207

RAX: dffffc0000000000 RBX: ffffc90003ccf5f8 RCX: ffffc9000c24b000
RDX: 000000000000000f RSI: ffffffff8751cb13 RDI: 0000000000000000
RBP: 0000000000000000 R08: 00000000000000f0 R09: 0000000000000140
R10: fffffbfff181d972 R11: 0000000000000000 R12: ffff888161fc3640
R13: 0000000000000a20 R14: 000000000000007e R15: ffffffff8dc5f620
FS: 00007feb621e4700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007feb621e3ff8 CR3: 00000001643a9000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
hsr_get_untagged_frame+0x4e/0x610 net/hsr/hsr_forward.c:164
hsr_forward_do net/hsr/hsr_forward.c:461 [inline]
hsr_forward_skb+0xcca/0x1d50 net/hsr/hsr_forward.c:623
hsr_handle_frame+0x588/0x7c0 net/hsr/hsr_slave.c:69
__netif_receive_skb_core+0x9fe/0x38f0 net/core/dev.c:5379
__netif_receive_skb_one_core+0xae/0x180 net/core/dev.c:5483
__netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5599
netif_receive_skb_internal net/core/dev.c:5685 [inline]
netif_receive_skb+0x12f/0x8d0 net/core/dev.c:5744
tun_rx_batched+0x4ab/0x7a0 drivers/net/tun.c:1544
tun_get_user+0x2686/0x3a00 drivers/net/tun.c:1995
tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2025
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:584
ksys_write+0x127/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: f266a683a480 ("net/hsr: Better frame dispatch")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221017165928.2150130-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_en: fix memory leak in bnxt_nvm_test()

Free the kzalloc'ed buffer before returning in the success path.

Fixes: 5b6ff128fdf6 ("bnxt_en: implement callbacks for devlink selftests")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1666020742-25834-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed

If the initialization fails in calling addrconf_init_net(), devconf_all is
the pointer that has been released. Then ip6mr_sk_done() is called to
release the net, accessing devconf->mc_forwarding directly causes invalid
pointer access.

The process is as follows:
setup_net()
ops_init()
addrconf_init_net()
all = kmemdup(...) ---> alloc "all"
...
net->ipv6.devconf_all = all;
__addrconf_sysctl_register() ---> failed
...
kfree(all); ---> ipv6.devconf_all invalid
...
ops_exit_list()
...
ip6mr_sk_done()
devconf = net->ipv6.devconf_all;
//devconf is invalid pointer
if (!devconf || !atomic_read(&devconf->mc_forwarding))

The following is the Call Trace information:
BUG: KASAN: use-after-free in ip6mr_sk_done+0x112/0x3a0
Read of size 4 at addr ffff888075508e88 by task ip/14554
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
print_report+0x155/0x454
kasan_report+0xba/0x1f0
kasan_check_range+0x35/0x1b0
ip6mr_sk_done+0x112/0x3a0
rawv6_close+0x48/0x70
inet_release+0x109/0x230
inet6_release+0x4c/0x70
sock_release+0x87/0x1b0
igmp6_net_exit+0x6b/0x170
ops_exit_list+0xb0/0x170
setup_net+0x7ac/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f7963322547

</TASK>
Allocated by task 14554:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0xa1/0xb0
__kmalloc_node_track_caller+0x4a/0xb0
kmemdup+0x28/0x60
addrconf_init_net+0x1be/0x840
ops_init+0xa5/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 14554:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x155/0x1b0
slab_free_freelist_hook+0x11b/0x220
__kmem_cache_free+0xa4/0x360
addrconf_init_net+0x623/0x840
ops_init+0xa5/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: 7d9b1b578d67 ("ip6mr: fix use-after-free in ip6mr_sk_done()")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221017080331.16878-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

udp: Update reuse->has_conns under reuseport_lock.

When we call connect() for a UDP socket in a reuseport group, we have
to update sk->sk_reuseport_cb->has_conns to 1.  Otherwise, the kernel
could select a unconnected socket wrongly for packets sent to the
connected socket.

However, the current way to set has_conns is illegal and possible to
trigger that problem.  reuseport_has_conns() changes has_conns under
rcu_read_lock(), which upgrades the RCU reader to the updater.  Then,
it must do the update under the updater's lock, reuseport_lock, but
it doesn't for now.

For this reason, there is a race below where we fail to set has_conns
resulting in the wrong socket selection.  To avoid the race, let's split
the reader and updater with proper locking.

cpu1                               cpu2
+----+                             +----+

__ip[46]_datagram_connect()        reuseport_grow()
.                                  .
|- reuseport_has_conns(sk, true)   |- more_reuse = __reuseport_alloc(more_socks_size)
|  .                               |
|  |- rcu_read_lock()
|  |- reuse = rcu_dereference(sk->sk_reuseport_cb)
|  |
|  |                               |  /* reuse->has_conns == 0 here */
|  |                               |- more_reuse->has_conns = reuse->has_conns
|  |- reuse->has_conns = 1         |  /* more_reuse->has_conns SHOULD BE 1 HERE */
|  |                               |
|  |                               |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb,
|  |                               |                     more_reuse)
|  `- rcu_read_unlock()            `- kfree_rcu(reuse, rcu)
|
|- sk->sk_state = TCP_ESTABLISHED

Note the likely(reuse) in reuseport_has_conns_set() is always true,
but we put the test there for ease of review.  [0]

For the record, usually, sk_reuseport_cb is changed under lock_sock().
The only exception is reuseport_grow() & TCP reqsk migration case.

  1) shutdown() TCP listener, which is moved into the latter part of
     reuse->socks[] to migrate reqsk.

  2) New listen() overflows reuse->socks[] and call reuseport_grow().

  3) reuse->max_socks overflows u16 with the new listener.

  4) reuseport_grow() pops the old shutdown()ed listener from the array
     and update its sk->sk_reuseport_cb as NULL without lock_sock().

shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(),
but, reuseport_has_conns_set() is called only for UDP under lock_sock(),
so likely(reuse) never be false in reuseport_has_conns_set().

[0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/

Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ethernet: mediatek: ppe: Remove the unused function mtk_foe_entry_usable()

The function mtk_foe_entry_usable() is defined in the mtk_ppe.c file, but
not called elsewhere, so delete this unused function.

drivers/net/ethernet/mediatek/mtk_ppe.c:400:20: warning: unused function 'mtk_foe_entry_usable'.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2409
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mtk_eth_wed-leak-fixes'

Yang Yingliang says:

====================
net: ethernet: mtk_eth_wed: fixe some leaks

I found some leaks in mtk_eth_soc.c/mtk_wed.c.

patch#1 - I found mtk_wed_exit() is never called, I think mtk_wed_exit() need
           be called in error path or module remove function to free the memory
           allocated in mtk_wed_add_hw().

patch#2 - The device is not put in error path in mtk_wed_add_hw().

patch#3 - The device_node pointer returned by of_parse_phandle() with refcount
           incremented, it should be decreased when it done.

This patchset was just compiled tested because I don't have any HW on
which to do the actual tests.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_wed: add missing of_node_put()

The device_node pointer returned by of_parse_phandle() with refcount
incremented, when finish using it, the refcount need be decreased.

Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_wed: add missing put_device() in mtk_wed_add_hw()

After calling get_device() in mtk_wed_add_hw(), in error path, put_device()
needs be called.

Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: fix possible memory leak in mtk_probe()

If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called
in error path or removing module to free the memory allocated in
mtk_wed_add_hw().

Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skmsg: pass gfp argument to alloc_sk_msg()

syzbot found that alloc_sk_msg() could be called from a
non sleepable context. sk_psock_verdict_recv() uses
rcu_read_lock() protection.

We need the callers to pass a gfp_t argument to avoid issues.

syzbot report was:

BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 3613, name: syz-executor414
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
INFO: lockdep is turned off.
CPU: 0 PID: 3613 Comm: syz-executor414 Not tainted 6.0.0-syzkaller-09589-g55be6084c8e0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106
__might_resched+0x538/0x6a0 kernel/sched/core.c:9877
might_alloc include/linux/sched/mm.h:274 [inline]
slab_pre_alloc_hook mm/slab.h:700 [inline]
slab_alloc_node mm/slub.c:3162 [inline]
slab_alloc mm/slub.c:3256 [inline]
kmem_cache_alloc_trace+0x59/0x310 mm/slub.c:3287
kmalloc include/linux/slab.h:600 [inline]
kzalloc include/linux/slab.h:733 [inline]
alloc_sk_msg net/core/skmsg.c:507 [inline]
sk_psock_skb_ingress_self+0x5c/0x330 net/core/skmsg.c:600
sk_psock_verdict_apply+0x395/0x440 net/core/skmsg.c:1014
sk_psock_verdict_recv+0x34d/0x560 net/core/skmsg.c:1201
tcp_read_skb+0x4a1/0x790 net/ipv4/tcp.c:1770
tcp_rcv_established+0x129d/0x1a10 net/ipv4/tcp_input.c:5971
tcp_v4_do_rcv+0x479/0xac0 net/ipv4/tcp_ipv4.c:1681
sk_backlog_rcv include/net/sock.h:1109 [inline]
__release_sock+0x1d8/0x4c0 net/core/sock.c:2906
release_sock+0x5d/0x1c0 net/core/sock.c:3462
tcp_sendmsg+0x36/0x40 net/ipv4/tcp.c:1483
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
__sys_sendto+0x46d/0x5f0 net/socket.c:2117
__do_sys_sendto net/socket.c:2129 [inline]
__se_sys_sendto net/socket.c:2125 [inline]
__x64_sys_sendto+0xda/0xf0 net/socket.c:2125
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 43312915b5ba ("skmsg: Get rid of unncessary memset()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'phylink_set_mac_pm'

Shenwei Wang says:

====================
net: phylink: add phylink_set_mac_pm() helper

Per Russell's suggestion, the implementation is changed from the helper
function to add an extra property in phylink_config structure because this
change can easily cover SFP usecase too.

Changes in v6:
- update the fix tag hash and format

Changes in v5:
- Add fix tag in the commit message

Changes in v4:
- Clean up the codes in phylink.c
- Continue the version number
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Enable mac_managed_pm phylink config

Enable the mac_managed_pm configuration in the phylink_config
structure to avoid the kernel warning during system resume.

Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phylink: add mac_managed_pm in phylink_config structure

The recent commit

'commit 744d23c71af3 ("net: phy: Warn about incorrect
mdio_bus_phy_resume() state")'

requires the MAC driver explicitly tell the phy driver who is
managing the PM, otherwise you will see warning during resume
stage.

Add a boolean property in the phylink_config structure so that
the MAC driver can use it to tell the PHY driver if it wants to
manage the PM.

Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}"

This reverts commit 854701ba4c39afae2362ba19a580c461cb183e4f.

We have more violations around, which leads to:

WARNING: CPU: 2 PID: 1 at include/linux/cpumask.h:110 __netif_set_xps_queue+0x14e/0x770

Let's back this out and retry with a larger clean up in -next.

Fixes: 854701ba4c39 ("net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}")
Link: https://lore.kernel.org/all/20221014030459.3272206-2-guoren@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: uninitialized variable in dsa_slave_netdevice_event()

Return zero if both dsa_slave_dev_check() and netdev_uses_dsa() are false.

Fixes: acc43b7bf52a ("net: dsa: allow masters to join a LAG")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sunhme: Uninitialized variable in happy_meal_init()

The "burst" string is only initialized for CONFIG_SPARC. It should be
set to "64" because that's what is used by PCI.

Fixes: 24cddbc3ef11 ("sunhme: Combine continued messages")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: Fix an error code in smc_lgr_create()

If smc_wr_alloc_lgr_mem() fails then return an error code. Don't return
success.

Fixes: 8799e310fb3f ("net/smc: add v2 support to the work request layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: dp83867: Extend RX strap quirk for SGMII mode

When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4
register should be set. The former is already handled in
dp83867_config_init; add the latter in SGMII specific initialization.

Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hv_netvsc: Fix a warning triggered by memcpy in rndis_filter

memcpy: detected field-spanning write (size 168) of single field "(void *)&request->response_msg + (sizeof(struct rndis_message) - sizeof(union rndis_message_container)) + sizeof(*req_id)" at drivers/net/hyperv/rndis_filter.c:338 (size 40)
RSP: 0018:ffffc90000144de0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881766b4000 RCX: 0000000000000000
RDX: 0000000000000102 RSI: 0000000000009ffb RDI: 00000000ffffffff
RBP: ffffc90000144e38 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffc90000144c48 R11: ffffffff82f56ac8 R12: ffff8881766b403c
R13: 00000000000000a8 R14: ffff888100b75000 R15: ffff888179301d00
FS: 0000000000000000(0000) GS:ffff8884d6280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f8b024c418 CR3: 0000000176548001 CR4: 00000000003706e0
Call Trace:
<IRQ>
? _raw_spin_unlock_irqrestore+0x27/0x50
netvsc_poll+0x556/0x940 [hv_netvsc]
__napi_poll+0x2e/0x170
net_rx_action+0x299/0x2f0
__do_softirq+0xed/0x2ef
__irq_exit_rcu+0x9f/0x110
irq_exit_rcu+0xe/0x20
sysvec_hyperv_callback+0xb0/0xd0
</IRQ>
<TASK>
asm_sysvec_hyperv_callback+0x1b/0x20
RIP: 0010:native_safe_halt+0xb/0x10

Fixes: A warning triggered when the response message len exceeds
the size of rndis_message. Inside the rndis_request structure
these fields are however followed by a RNDIS_EXT_LEN padding
so it is safe to use unsafe_memcpy.

Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Cezar Bulinaru <cbulinaru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/atm: fix proc_mpc_write incorrect return value

Then the input contains '\0' or '\n', proc_mpc_write has read them,
so the return value needs +1.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xiaobo Liu <cppcoffee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Change VF mac via PF as first preference if available.

Changing a VF's mac address through the VF (rather than via the PF)
fails with EPERM because the latter part of efx_ef10_set_mac_address
attempts to change the vport mac address list as the VF.
Even with this fixed it still fails with EBUSY because the vadaptor
is still assigned on the VF - the vadaptor reassignment must be within
a section where the VF has torn down its state.

A major reason this has broken is because we have two functions that
ostensibly do the same thing - have a PF and VF cooperate to change a
VF mac address. Rather than do this, if we are changing the mac of a VF
that has a link to the PF in the same VM then simply call
sriov_set_vf_mac instead, which is a proven working function that does
that.

If there is no PF available, or that fails non-fatally, then attempt to
change the VF's mac address as we would a PF, without updating the PF's
data.

Test case:
Create a VF:
  echo 1 > /sys/class/net/<if>/device/sriov_numvfs
Set the mac address of the VF directly:
  ip link set <vf> addr 00:11:22:33:44:55
Set the MAC address of the VF via the PF:
  ip link set <pf> vf 0 mac 00:11:22:33:44:66
Without this patch the last command will fail with ENOENT.

Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Reported-by: Íñigo Huguet <ihuguet@redhat.com>
Fixes: 910c8789a777 ("set the MAC address using MC_CMD_VADAPTOR_SET_MAC")
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: nfc: s3fwrn5: Drop Krzysztof Opasiak

Emails to Krzysztof Opasiak bounce ("Recipient address rejected: User
unknown") so drop his email from maintainers of s3fwrn5 NFC bindings and
driver.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: git://github -> https://github.com for petkan

Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.

Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macvlan: change schedule system_wq to system_unbound_wq

For FT2000+/64 devices,
when four virtual machines share the same physical network interface,
DROP will occur due to the single core CPU performance problem.

ip_check_defrag and macvlan_process_broadcast is on the same CPU.
When the MACVLAN PORT increases, the CPU usage reaches more than 90%.
bc_queue > bc_queue_len_used (default 1000), causing DROP.

Signed-off-by: zhangxiangqian <zhangxiangqian@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

tls: strp: make sure the TCP skbs do not have overlapping data

TLS tries to get away with using the TCP input queue directly.
This does not work if there is duplicated data (multiple skbs
holding bytes for the same seq number range due to retransmits).
Check for this condition and fall back to copy mode, it should
be rare.

Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

i40e: Fix DMA mappings leak

During reallocation of RX buffers, new DMA mappings are created for
those buffers.

steps for reproduction:
while :
do
for ((i=0; i<=8160; i=i+32))
do
ethtool -G enp130s0f0 rx $i tx $i
sleep 0.5
ethtool -g enp130s0f0
done
done

This resulted in crash:
i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536
Driver BUG
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50
Call Trace:
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
Missing register, driver bug
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140
Call Trace:
xdp_rxq_info_unreg+0x1e/0x50
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b

This was caused because of new buffers with different RX ring count should
substitute older ones, but those buffers were freed in
i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi,
thus kfree on rx_bi caused leak of already mapped DMA.

Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally
reallocate back to rx_bi when BPF program unloads.

If BPF program is loaded/unloaded and XSK pools are created, reallocate
RX queues accordingly in XSP_SETUP_XSK_POOL handler.

Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings")
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: qca8k: fix ethtool autocast mib for big-endian systems

The switch sends autocast mib in little-endian. This is problematic for
big-endian system as the values needs to be converted.

Fix this by converting each mib value to cpu byte order.

Fixes: 5c957c7ca78c ("net: dsa: qca8k: add support for mib autocast in Ethernet packet")
Tested-by: Pawel Dembicki <paweldembicki@gmail.com>
Tested-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: qca8k: fix inband mgmt for big-endian systems

The header and the data of the skb for the inband mgmt requires
to be in little-endian. This is problematic for big-endian system
as the mgmt header is written in the cpu byte order.

Fix this by converting each value for the mgmt header and data to
little-endian, and convert to cpu byte order the mgmt header and
data sent by the switch.

Fixes: 5950c7c0a68c ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet")
Tested-by: Pawel Dembicki <paweldembicki@gmail.com>
Tested-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix an information leak in tipc_topsrv_kern_subscr

Use a 8-byte write to initialize sub.usr_handle in
tipc_topsrv_kern_subscr(), otherwise four bytes remain uninitialized
when issuing setsockopt(..., SOL_TIPC, ...).
This resulted in an infoleak reported by KMSAN when the packet was
received:

  =====================================================
  BUG: KMSAN: kernel-infoleak in copyout+0xbc/0x100 lib/iov_iter.c:169
   instrument_copy_to_user ./include/linux/instrumented.h:121
   copyout+0xbc/0x100 lib/iov_iter.c:169
   _copy_to_iter+0x5c0/0x20a0 lib/iov_iter.c:527
   copy_to_iter ./include/linux/uio.h:176
   simple_copy_to_iter+0x64/0xa0 net/core/datagram.c:513
   __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419
   skb_copy_datagram_iter+0x58/0x200 net/core/datagram.c:527
   skb_copy_datagram_msg ./include/linux/skbuff.h:3903
   packet_recvmsg+0x521/0x1e70 net/packet/af_packet.c:3469
   ____sys_recvmsg+0x2c4/0x810 net/socket.c:?
   ___sys_recvmsg+0x217/0x840 net/socket.c:2743
   __sys_recvmsg net/socket.c:2773
   __do_sys_recvmsg net/socket.c:2783
   __se_sys_recvmsg net/socket.c:2780
   __x64_sys_recvmsg+0x364/0x540 net/socket.c:2780
   do_syscall_x64 arch/x86/entry/common.c:50
   do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120

  ...

  Uninit was stored to memory at:
   tipc_sub_subscribe+0x42d/0xb50 net/tipc/subscr.c:156
   tipc_conn_rcv_sub+0x246/0x620 net/tipc/topsrv.c:375
   tipc_topsrv_kern_subscr+0x2e8/0x400 net/tipc/topsrv.c:579
   tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190
   tipc_sk_join+0x2a8/0x770 net/tipc/socket.c:3084
   tipc_setsockopt+0xae5/0xe40 net/tipc/socket.c:3201
   __sys_setsockopt+0x87f/0xdc0 net/socket.c:2252
   __do_sys_setsockopt net/socket.c:2263
   __se_sys_setsockopt net/socket.c:2260
   __x64_sys_setsockopt+0xe0/0x160 net/socket.c:2260
   do_syscall_x64 arch/x86/entry/common.c:50
   do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120

  Local variable sub created at:
   tipc_topsrv_kern_subscr+0x57/0x400 net/tipc/topsrv.c:562
   tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190

  Bytes 84-87 of 88 are uninitialized
  Memory access of size 88 starts at ffff88801ed57cd0
  Data copied to user address 0000000020000400
  ...
  =====================================================

Signed-off-by: Alexander Potapenko <glider@google.com>
Fixes: 026321c6d056a5 ("tipc: rename tipc_server to tipc_topsrv")
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: Fix recognition of trial period

The trial period exists until jiffies is after addr_trial_end. But as
jiffies will eventually overflow, just using time_after will eventually
give incorrect results. As the node address is set once the trial period
ends, this can be used to know that we are not in the trial period.

Fixes: e415577f57f4 ("tipc: correct discovery message handling during address trial period")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'net-6.1-rc1' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, and wifi.

Current release - regressions:

   - Revert "net/sched: taprio: make qdisc_leaf() see the
     per-netdev-queue pfifo child qdiscs", it may cause crashes when the
     qdisc is reconfigured

   - inet: ping: fix splat due to packet allocation refactoring in inet

   - tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF
     due to races when per-netns hash table is used

  Current release - new code bugs:

   - eth: adin1110: check in netdev_event that netdev belongs to driver

   - fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co.

  Previous releases - regressions:

   - ipv4: handle attempt to delete multipath route when fib_info
     contains an nh reference, avoid oob access

   - wifi: fix handful of bugs in the new Multi-BSSID code

   - wifi: mt76: fix rate reporting / throughput regression on mt7915
     and newer, fix checksum offload

   - wifi: iwlwifi: mvm: fix double list_add at
     iwl_mvm_mac_wake_tx_queue (other cases)

   - wifi: mac80211: do not drop packets smaller than the LLC-SNAP
     header on fast-rx

  Previous releases - always broken:

   - ieee802154: don't warn zero-sized raw_sendmsg()

   - ipv6: ping: fix wrong checksum for large frames

   - mctp: prevent double key removal and unref

   - tcp/udp: fix memory leaks and races around IPV6_ADDRFORM

   - hv_netvsc: fix race between VF offering and VF association message

  Misc:

   - remove -Warray-bounds silencing in the drivers, compilers fixed"

* tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
  sunhme: fix an IS_ERR() vs NULL check in probe
  net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
  kcm: avoid potential race in kcm_tx_work
  tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
  net: phy: micrel: Fixes FIELD_GET assertion
  openvswitch: add nf_ct_is_confirmed check before assigning the helper
  tcp: Fix data races around icsk->icsk_af_ops.
  ipv6: Fix data races around sk->sk_prot.
  tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
  udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
  tcp/udp: Fix memory leak in ipv6_renew_options().
  mctp: prevent double key removal and unref
  selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1
  netfilter: rpfilter/fib: Populate flowic_l3mdev field
  selftests: netfilter: Test reverse path filtering
  net/mlx5: Make ASO poll CQ usable in atomic context
  tcp: cdg: allow tcp_cdg_release() to be called multiple times
  inet: ping: fix recent breakage
  ipv6: ping: fix wrong checksum for large frames
  net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports
  ...

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:

- Fix a regression in virtio pci on power

- Add a reviewer for ifcvf

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/ifcvf: add reviewer
virtio_pci: use irq to detect interrupt support

Merge tag 'trace-v6.1-1' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

- Found that the synthetic events were using strlen/strscpy() on values
   that could have come from userspace, and that is bad.

   Consolidate the string logic of kprobe and eprobe and extend it to
   the synthetic events to safely process string addresses.

- Clean up content of text dump in ftrace_bug() where the output does
   not make char reads into signed and sign extending the byte output.

- Fix some kernel docs in the ring buffer code.

* tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix reading strings from synthetic events
  tracing: Add "(fault)" name injection to kernel probes
  tracing: Move duplicate code of trace_kprobe/eprobe.c into header
  ring-buffer: Fix kernel-doc
  ftrace: Fix char print issue in print_ip_ins()

Merge tag 'linux-watchdog-6.1-rc1' of git://linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

- new driver for Exar/MaxLinear XR28V38x

- support for exynosautov9 SoC

- support for Renesas R-Car V5H (R8A779G0) and RZ/V2M (r9a09g011) SoC

- support for imx93

- several other fixes and improvements

* tag 'linux-watchdog-6.1-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
  watchdog: twl4030_wdt: add missing mod_devicetable.h include
  dt-bindings: watchdog: migrate mt7621 text bindings to YAML
  watchdog: sp5100_tco: Add "action" module parameter
  watchdog: imx93: add watchdog timer on imx93
  watchdog: imx7ulp_wdt: init wdog when it was active
  watchdog: imx7ulp_wdt: Handle wdog reconfigure failure
  watchdog: imx7ulp_wdt: Fix RCS timeout issue
  watchdog: imx7ulp_wdt: Check CMD32EN in wdog init
  watchdog: imx7ulp: Add explict memory barrier for unlock sequence
  watchdog: imx7ulp: Move suspend/resume to noirq phase
  watchdog: rti-wdt:using the pm_runtime_resume_and_get to simplify the code
  dt-bindings: watchdog: rockchip: add rockchip,rk3128-wdt
  watchdog: s3c2410_wdt: support exynosautov9 watchdog
  dt-bindings: watchdog: add exynosautov9 compatible
  watchdog: npcm: Enable clock if provided
  watchdog: meson: keep running if already active
  watchdog: dt-bindings: atmel,at91sam9-wdt: convert to json-schema
  watchdog: armada_37xx_wdt: Fix .set_timeout callback
  watchdog: sa1100: make variable sa1100dog_driver static
  watchdog: w83977f_wdt: Fix comment typo
  ...

Merge tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
"A quiet round this time: several assorted filesystem fixes, the most
  noteworthy one being some additional wakeups in cap handling code, and
  a messenger cleanup"

* tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client:
  ceph: remove Sage's git tree from documentation
  ceph: fix incorrectly showing the .snap size for stat
  ceph: fail the open_by_handle_at() if the dentry is being unlinked
  ceph: increment i_version when doing a setattr with caps
  ceph: Use kcalloc for allocating multiple elements
  ceph: no need to wait for transition RDCACHE|RD -> RD
  ceph: fail the request if the peer MDS doesn't support getvxattr op
  ceph: wake up the waiters if any new caps comes
  libceph: drop last_piece flag from ceph_msg_data_cursor

Merge tag 'nfs-for-6.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client updates from Anna Schumaker:
"New Features:
   - Add NFSv4.2 xattr tracepoints
   - Replace xprtiod WQ in rpcrdma
   - Flexfiles cancels I/O on layout recall or revoke

  Bugfixes and Cleanups:
   - Directly use ida_alloc() / ida_free()
   - Don't open-code max_t()
   - Prefer using strscpy over strlcpy
   - Remove unused forward declarations
   - Always return layout states on flexfiles layout return
   - Have LISTXATTR treat NFS4ERR_NOXATTR as an empty reply instead of
     error
   - Allow more xprtrdma memory allocations to fail without triggering a
     reclaim
   - Various other xprtrdma clean ups
   - Fix rpc_killall_tasks() races"

* tag 'nfs-for-6.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (27 commits)
  NFSv4/flexfiles: Cancel I/O if the layout is recalled or revoked
  SUNRPC: Add API to force the client to disconnect
  SUNRPC: Add a helper to allow pNFS drivers to selectively cancel RPC calls
  SUNRPC: Fix races with rpc_killall_tasks()
  xprtrdma: Fix uninitialized variable
  xprtrdma: Prevent memory allocations from driving a reclaim
  xprtrdma: Memory allocation should be allowed to fail during connect
  xprtrdma: MR-related memory allocation should be allowed to fail
  xprtrdma: Clean up synopsis of rpcrdma_regbuf_alloc()
  xprtrdma: Clean up synopsis of rpcrdma_req_create()
  svcrdma: Clean up RPCRDMA_DEF_GFP
  SUNRPC: Replace the use of the xprtiod WQ in rpcrdma
  NFSv4.2: Add a tracepoint for listxattr
  NFSv4.2: Add tracepoints for getxattr, setxattr, and removexattr
  NFSv4.2: Move TRACE_DEFINE_ENUM(NFS4_CONTENT_*) under CONFIG_NFS_V4_2
  NFSv4.2: Add special handling for LISTXATTR receiving NFS4ERR_NOXATTR
  nfs: remove nfs_wait_atomic_killable() and nfs_write_prepare() declaration
  NFSv4: remove nfs4_renewd_prepare_shutdown() declaration
  fs/nfs/pnfs_nfs.c: fix spelling typo and syntax error in comment
  NFSv4/pNFS: Always return layout stats on layout return for flexfiles
  ...

Merge tag 'for-linus-6.1-ofs1' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs update from Mike Marshall:
"Change iterate to iterate_shared"

* tag 'for-linus-6.1-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
Orangefs: change iterate to iterate_shared

sunhme: fix an IS_ERR() vs NULL check in probe

The devm_request_region() function does not return error pointers, it
returns NULL on error.

Fixes: 914d9b2711dd ("sunhme: switch to devres")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Link: https://lore.kernel.org/r/Y0bWzJL8JknX8MUf@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: marvell: prestera: fix a couple NULL vs IS_ERR() checks

The __prestera_nexthop_group_create() function returns NULL on error
and the prestera_nexthop_group_get() returns error pointers. Fix these
two checks.

Fixes: 0a23ae237171 ("net: marvell: prestera: Add router nexthops ABI")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Y0bWq+7DoKK465z8@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

kcm: avoid potential race in kcm_tx_work

syzbot found that kcm_tx_work() could crash [1] in:

/* Primarily for SOCK_SEQPACKET sockets */
if (likely(sk->sk_socket) &&
test_bit(SOCK_NOSPACE, &sk->sk_socket->flags)) {
<<*>> clear_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
sk->sk_write_space(sk);
}

I think the reason is that another thread might concurrently
run in kcm_release() and call sock_orphan(sk) while sk is not
locked. kcm_tx_work() find sk->sk_socket being NULL.

[1]
BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:86 [inline]
BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
BUG: KASAN: null-ptr-deref in kcm_tx_work+0xff/0x160 net/kcm/kcmsock.c:742
Write of size 8 at addr 0000000000000008 by task kworker/u4:3/53

CPU: 0 PID: 53 Comm: kworker/u4:3 Not tainted 5.19.0-rc3-next-20220621-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: kkcmd kcm_tx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
kasan_report+0xbe/0x1f0 mm/kasan/report.c:495
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
instrument_atomic_write include/linux/instrumented.h:86 [inline]
clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
kcm_tx_work+0xff/0x160 net/kcm/kcmsock.c:742
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Link: https://lore.kernel.org/r/20221012133412.519394-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: Clean up kernel listener's reqsk in inet_twsk_purge()

Eric Dumazet reported a use-after-free related to the per-netns ehash
series. [0]

When we create a TCP socket from userspace, the socket always holds a
refcnt of the netns.  This guarantees that a reqsk timer is always fired
before netns dismantle.  Each reqsk has a refcnt of its listener, so the
listener is not freed before the reqsk, and the net is not freed before
the listener as well.

OTOH, when in-kernel users create a TCP socket, it might not hold a refcnt
of its netns.  Thus, a reqsk timer can be fired after the netns dismantle
and access freed per-netns ehash.

To avoid the use-after-free, we need to clean up TCP_NEW_SYN_RECV sockets
in inet_twsk_purge() if the netns uses a per-netns ehash.

[0]: https://lore.kernel.org/netdev/CANn89iLXMup0dRD_Ov79Xt8N9FM0XdhCHEN05sf3eLwxKweM6w@mail.gmail.com/

BUG: KASAN: use-after-free in tcp_or_dccp_get_hashinfo
include/net/inet_hashtables.h:181 [inline]
BUG: KASAN: use-after-free in reqsk_queue_unlink+0x320/0x350
net/ipv4/inet_connection_sock.c:913
Read of size 8 at addr ffff88807545bd80 by task syz-executor.2/8301

CPU: 1 PID: 8301 Comm: syz-executor.2 Not tainted
6.0.0-syzkaller-02757-gaf7d23f9d96a #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 09/22/2022
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
tcp_or_dccp_get_hashinfo include/net/inet_hashtables.h:181 [inline]
reqsk_queue_unlink+0x320/0x350 net/ipv4/inet_connection_sock.c:913
inet_csk_reqsk_queue_drop net/ipv4/inet_connection_sock.c:927 [inline]
inet_csk_reqsk_queue_drop_and_put net/ipv4/inet_connection_sock.c:939 [inline]
reqsk_timer_handler+0x724/0x1160 net/ipv4/inet_connection_sock.c:1053
call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790
__run_timers kernel/time/timer.c:1768 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803
__do_softirq+0x1d0/0x9c8 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x123/0x180 kernel/softirq.c:650
irq_exit_rcu+0x5/0x20 kernel/softirq.c:662
sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1107
</IRQ>

Fixes: d1e5e6408b30 ("tcp: Introduce optional per-netns ehash.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221012145036.74960-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vdpa/ifcvf: add reviewer

Zhu Lingshan has been writing and reviewing ifcvf patches for
a while now, add as reviewer.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>

virtio_pci: use irq to detect interrupt support

commit 71491c54eafa ("virtio_pci: don't try to use intxif pin is zero")
breaks virtio_pci on powerpc, when running as a qemu guest.

vp_find_vqs() bails out because pci_dev->pin == 0.

But pci_dev->irq is populated correctly, so vp_find_vqs_intx() would
succeed if we called it - which is what the code used to do.

This seems to happen because pci_dev->pin is not populated in
pci_assign_irq(). A PCI core bug? Maybe.

However Linus said:
I really think that that is basically the only time you should use
that 'pci_dev->pin' thing: it basically exists not for "does this
device have an IRQ", but for "what is the routing of this irq on this
device".

and
The correct way to check for "no irq" doesn't use NO_IRQ at all, it just does
if (dev->irq) ...

so let's just check irq and be done with it.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: 71491c54eafa ("virtio_pci: don't try to use intxif pin is zero")
Cc: "Angus Chen" <angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221012220312.308522-1-mst@redhat.com>

Merge tag 'wireless-2022-10-13' of git://git./linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
More wireless fixes for 6.1

This has only the fixes for the scan parsing issues.

* tag 'wireless-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: cfg80211: update hidden BSSes to avoid WARN_ON
  wifi: mac80211: fix crash in beacon protection for P2P-device
  wifi: mac80211_hwsim: avoid mac80211 warning on bad rate
  wifi: cfg80211: avoid nontransmitted BSS list corruption
  wifi: cfg80211: fix BSS refcounting bugs
  wifi: cfg80211: ensure length byte is present before access
  wifi: mac80211: fix MBSSID parsing use-after-free
  wifi: cfg80211/mac80211: reject bad MBSSID elements
  wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans()
====================

Link: https://lore.kernel.org/r/20221013100522.46346-1-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'cve-fixes-2022-10-13'

Pull in the fixes for various scan parsing bugs found by
Sönke Huster by fuzzing.

net: phy: micrel: Fixes FIELD_GET assertion

FIELD_GET() must only be used with a mask that is a compile-time
constant. Mark the functions as __always_inline to avoid the problem.

Fixes: 21b688dabecb6a ("net: phy: micrel: Cable Diag feature for lan8814 phy")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Link: https://lore.kernel.org/r/20221011095437.12580-1-Divya.Koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

openvswitch: add nf_ct_is_confirmed check before assigning the helper

A WARN_ON call trace would be triggered when 'ct(commit, alg=helper)'
applies on a confirmed connection:

  WARNING: CPU: 0 PID: 1251 at net/netfilter/nf_conntrack_extend.c:98
  RIP: 0010:nf_ct_ext_add+0x12d/0x150 [nf_conntrack]
  Call Trace:
   <TASK>
   nf_ct_helper_ext_add+0x12/0x60 [nf_conntrack]
   __nf_ct_try_assign_helper+0xc4/0x160 [nf_conntrack]
   __ovs_ct_lookup+0x72e/0x780 [openvswitch]
   ovs_ct_execute+0x1d8/0x920 [openvswitch]
   do_execute_actions+0x4e6/0xb60 [openvswitch]
   ovs_execute_actions+0x60/0x140 [openvswitch]
   ovs_packet_cmd_execute+0x2ad/0x310 [openvswitch]
   genl_family_rcv_msg_doit.isra.15+0x113/0x150
   genl_rcv_msg+0xef/0x1f0

which can be reproduced with these OVS flows:

  table=0, in_port=veth1,tcp,tcp_dst=2121,ct_state=-trk
  actions=ct(commit, table=1)
  table=1, in_port=veth1,tcp,tcp_dst=2121,ct_state=+trk+new
  actions=ct(commit, alg=ftp),normal

The issue was introduced by commit 248d45f1e193 ("openvswitch: Allow
attaching helper in later commit") where it somehow removed the check
of nf_ct_is_confirmed before asigning the helper. This patch is to fix
it by bringing it back.

Fixes: 248d45f1e193 ("openvswitch: Allow attaching helper in later commit")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Tested-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/c5c9092a22a2194650222bffaf786902613deb16.1665085502.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tcp-udp-fix-memory-leaks-and-data-races-around-ipv6_addrform'

Kuniyuki Iwashima says:

====================
tcp/udp: Fix memory leaks and data races around IPV6_ADDRFORM.

This series fixes some memory leaks and data races caused in the
same scenario where one thread converts an IPv6 socket into IPv4
with IPV6_ADDRFORM and another accesses the socket concurrently.

  v4: https://lore.kernel.org/netdev/20221004171802.40968-1-kuniyu@amazon.com/
  v3 (Resend): https://lore.kernel.org/netdev/20221003154425.49458-1-kuniyu@amazon.com/
  v3: https://lore.kernel.org/netdev/20220929012542.55424-1-kuniyu@amazon.com/
  v2: https://lore.kernel.org/netdev/20220928002741.64237-1-kuniyu@amazon.com/
  v1: https://lore.kernel.org/netdev/20220927161209.32939-1-kuniyu@amazon.com/
====================

Link: https://lore.kernel.org/r/20221006185349.74777-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: Fix data races around icsk->icsk_af_ops.

setsockopt(IPV6_ADDRFORM) and tcp_v6_connect() change icsk->icsk_af_ops
under lock_sock(), but tcp_(get|set)sockopt() read it locklessly. To
avoid load/store tearing, we need to add READ_ONCE() and WRITE_ONCE()
for the reads and writes.

Thanks to Eric Dumazet for providing the syzbot report:

BUG: KCSAN: data-race in tcp_setsockopt / tcp_v6_connect

write to 0xffff88813c624518 of 8 bytes by task 23936 on cpu 0:
tcp_v6_connect+0x5b3/0xce0 net/ipv6/tcp_ipv6.c:240
__inet_stream_connect+0x159/0x6d0 net/ipv4/af_inet.c:660
inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:724
__sys_connect_file net/socket.c:1976 [inline]
__sys_connect+0x197/0x1b0 net/socket.c:1993
__do_sys_connect net/socket.c:2003 [inline]
__se_sys_connect net/socket.c:2000 [inline]
__x64_sys_connect+0x3d/0x50 net/socket.c:2000
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff88813c624518 of 8 bytes by task 23937 on cpu 1:
tcp_setsockopt+0x147/0x1c80 net/ipv4/tcp.c:3789
sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3585
__sys_setsockopt+0x212/0x2b0 net/socket.c:2252
__do_sys_setsockopt net/socket.c:2263 [inline]
__se_sys_setsockopt net/socket.c:2260 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2260
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0xffffffff8539af68 -> 0xffffffff8539aff8

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23937 Comm: syz-executor.5 Not tainted
6.0.0-rc4-syzkaller-00331-g4ed9c1e971b1-dirty #0

Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 08/26/2022

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: Fix data races around sk->sk_prot.

Commit 086d49058cd8 ("ipv6: annotate some data-races around sk->sk_prot")
fixed some data-races around sk->sk_prot but it was not enough.

Some functions in inet6_(stream|dgram)_ops still access sk->sk_prot
without lock_sock() or rtnl_lock(), so they need READ_ONCE() to avoid
load tearing.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().

Originally, inet6_sk(sk)->XXX were changed under lock_sock(), so we were
able to clean them up by calling inet6_destroy_sock() during the IPv6 ->
IPv4 conversion by IPV6_ADDRFORM.  However, commit 03485f2adcde ("udpv6:
Add lockless sendmsg() support") added a lockless memory allocation path,
which could cause a memory leak:

setsockopt(IPV6_ADDRFORM)                 sendmsg()
+-----------------------+                 +-------+
- do_ipv6_setsockopt(sk, ...)             - udpv6_sendmsg(sk, ...)
  - sockopt_lock_sock(sk)                   ^._ called via udpv6_prot
    - lock_sock(sk)                             before WRITE_ONCE()
  - WRITE_ONCE(sk->sk_prot, &tcp_prot)
  - inet6_destroy_sock()                    - if (!corkreq)
  - sockopt_release_sock(sk)                  - ip6_make_skb(sk, ...)
    - release_sock(sk)                          ^._ lockless fast path for
                                                    the non-corking case

                                                - __ip6_append_data(sk, ...)
                                                  - ipv6_local_rxpmtu(sk, ...)
                                                    - xchg(&np->rxpmtu, skb)
                                                      ^._ rxpmtu is never freed.

                                                - goto out_no_dst;

                                            - lock_sock(sk)

For now, rxpmtu is only the case, but not to miss the future change
and a similar bug fixed in commit e27326009a3d ("net: ping6: Fix
memleak in ipv6_renew_options()."), let's set a new function to IPv6
sk->sk_destruct() and call inet6_cleanup_sock() there.  Since the
conversion does not change sk->sk_destruct(), we can guarantee that
we can clean up IPv6 resources finally.

We can now remove all inet6_destroy_sock() calls from IPv6 protocol
specific ->destroy() functions, but such changes are invasive to
backport.  So they can be posted as a follow-up later for net-next.

Fixes: 03485f2adcde ("udpv6: Add lockless sendmsg() support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).

Commit 4b340ae20d0e ("IPv6: Complete IPV6_DONTFRAG support") forgot
to add a change to free inet6_sk(sk)->rxpmtu while converting an IPv6
socket into IPv4 with IPV6_ADDRFORM. After conversion, sk_prot is
changed to udp_prot and ->destroy() never cleans it up, resulting in
a memory leak.

This is due to the discrepancy between inet6_destroy_sock() and
IPV6_ADDRFORM, so let's call inet6_destroy_sock() from IPV6_ADDRFORM
to remove the difference.

However, this is not enough for now because rxpmtu can be changed
without lock_sock() after commit 03485f2adcde ("udpv6: Add lockless
sendmsg() support"). We will fix this case in the following patch.

Note we will rename inet6_destroy_sock() to inet6_cleanup_sock() and
remove unnecessary inet6_destroy_sock() calls in sk_prot->destroy()
in the future.

Fixes: 4b340ae20d0e ("IPv6: Complete IPV6_DONTFRAG support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp/udp: Fix memory leak in ipv6_renew_options().

syzbot reported a memory leak [0] related to IPV6_ADDRFORM.

The scenario is that while one thread is converting an IPv6 socket into
IPv4 with IPV6_ADDRFORM, another thread calls do_ipv6_setsockopt() and
allocates memory to inet6_sk(sk)->XXX after conversion.

Then, the converted sk with (tcp|udp)_prot never frees the IPv6 resources,
which inet6_destroy_sock() should have cleaned up.

setsockopt(IPV6_ADDRFORM)                 setsockopt(IPV6_DSTOPTS)
+-----------------------+                 +----------------------+
- do_ipv6_setsockopt(sk, ...)
  - sockopt_lock_sock(sk)                 - do_ipv6_setsockopt(sk, ...)
    - lock_sock(sk)                         ^._ called via tcpv6_prot
  - WRITE_ONCE(sk->sk_prot, &tcp_prot)          before WRITE_ONCE()
  - xchg(&np->opt, NULL)
  - txopt_put(opt)
  - sockopt_release_sock(sk)
    - release_sock(sk)                      - sockopt_lock_sock(sk)
                                              - lock_sock(sk)
                                            - ipv6_set_opt_hdr(sk, ...)
                                              - ipv6_update_options(sk, opt)
                                                - xchg(&inet6_sk(sk)->opt, opt)
                                                  ^._ opt is never freed.

                                            - sockopt_release_sock(sk)
                                              - release_sock(sk)

Since IPV6_DSTOPTS allocates options under lock_sock(), we can avoid this
memory leak by testing whether sk_family is changed by IPV6_ADDRFORM after
acquiring the lock.

This issue exists from the initial commit between IPV6_ADDRFORM and
IPV6_PKTOPTIONS.

[0]:
BUG: memory leak
unreferenced object 0xffff888009ab9f80 (size 96):
  comm "syz-executor583", pid 328, jiffies 4294916198 (age 13.034s)
  hex dump (first 32 bytes):
    01 00 00 00 48 00 00 00 08 00 00 00 00 00 00 00  ....H...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000002ee98ae1>] kmalloc include/linux/slab.h:605 [inline]
    [<000000002ee98ae1>] sock_kmalloc+0xb3/0x100 net/core/sock.c:2566
    [<0000000065d7b698>] ipv6_renew_options+0x21e/0x10b0 net/ipv6/exthdrs.c:1318
    [<00000000a8c756d7>] ipv6_set_opt_hdr net/ipv6/ipv6_sockglue.c:354 [inline]
    [<00000000a8c756d7>] do_ipv6_setsockopt.constprop.0+0x28b7/0x4350 net/ipv6/ipv6_sockglue.c:668
    [<000000002854d204>] ipv6_setsockopt+0xdf/0x190 net/ipv6/ipv6_sockglue.c:1021
    [<00000000e69fdcf8>] tcp_setsockopt+0x13b/0x2620 net/ipv4/tcp.c:3789
    [<0000000090da4b9b>] __sys_setsockopt+0x239/0x620 net/socket.c:2252
    [<00000000b10d192f>] __do_sys_setsockopt net/socket.c:2263 [inline]
    [<00000000b10d192f>] __se_sys_setsockopt net/socket.c:2260 [inline]
    [<00000000b10d192f>] __x64_sys_setsockopt+0xbe/0x160 net/socket.c:2260
    [<000000000a80d7aa>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<000000000a80d7aa>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
    [<000000004562b5c6>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-kselftest-kunit-6.1-rc1-2' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull more KUnit updates from Shuah Khan:
"Features and fixes:

   - simplify resource use

   - make kunit_malloc() and kunit_free() allocations and frees
     consistent. kunit_free() frees only the memory allocated by
     kunit_malloc()

   - stop downloading risc-v opensbi binaries using wget

   - other fixes and improvements to tool and KUnit framework"

* tag 'linux-kselftest-kunit-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Documentation: kunit: Update description of --alltests option
  kunit: declare kunit_assert structs as const
  kunit: rename base KUNIT_ASSERTION macro to _KUNIT_FAILED
  kunit: remove format func from struct kunit_assert, get it to 0 bytes
  kunit: tool: Don't download risc-v opensbi firmware with wget
  kunit: make kunit_kfree(NULL) a no-op to match kfree()
  kunit: make kunit_kfree() not segfault on invalid inputs
  kunit: make kunit_kfree() only work on pointers from kunit_malloc() and friends
  kunit: drop test pointer in string_stream_fragment
  kunit: string-stream: Simplify resource use

Merge tag 'linux-kselftest-next-6.1-rc1-2' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull more Kselftest updates from Shuah Khan:
"This consists of fixes and improvements to memory-hotplug test and a
  minor spelling fix to ftrace test"

* tag 'linux-kselftest-next-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  docs: notifier-error-inject: Correct test's name
  selftests/memory-hotplug: Adjust log info for maintainability
  selftests/memory-hotplug: Restore memory before exit
  selftests/memory-hotplug: Add checking after online or offline
  selftests/ftrace: func_event_triggers: fix typo in user message

Merge tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

- Prune private items from vfio_pci_core.h to a new internal header,
   fix missed function rename, and refactor vfio-pci interrupt defines
   (Jason Gunthorpe)

- Create consistent naming and handling of ioctls with a function per
   ioctl for vfio-pci and vfio group handling, use proper type args
   where available (Jason Gunthorpe)

- Implement a set of low power device feature ioctls allowing userspace
   to make use of power states such as D3cold where supported (Abhishek
   Sahu)

- Remove device counter on vfio groups, which had restricted the page
   pinning interface to singleton groups to account for limitations in
   the type1 IOMMU backend. Document usage as limited to emulated IOMMU
   devices, ie. traditional mdev devices where this restriction is
   consistent (Jason Gunthorpe)

- Correct function prefix in hisi_acc driver incurred during previous
   refactoring (Shameer Kolothum)

- Correct typo and remove redundant warning triggers in vfio-fsl driver
   (Christophe JAILLET)

- Introduce device level DMA dirty tracking uAPI and implementation in
   the mlx5 variant driver (Yishai Hadas & Joao Martins)

- Move much of the vfio_device life cycle management into vfio core,
   simplifying and avoiding duplication across drivers. This also
   facilitates adding a struct device to vfio_device which begins the
   introduction of device rather than group level user support and fills
   a gap allowing userspace identify devices as vfio capable without
   implicit knowledge of the driver (Kevin Tian & Yi Liu)

- Split vfio container handling to a separate file, creating a more
   well defined API between the core and container code, masking IOMMU
   backend implementation from the core, allowing for an easier future
   transition to an iommufd based implementation of the same (Jason
   Gunthorpe)

- Attempt to resolve race accessing the iommu_group for a device
   between vfio releasing DMA ownership and removal of the device from
   the IOMMU driver. Follow-up with support to allow vfio_group to exist
   with NULL iommu_group pointer to support existing userspace use cases
   of holding the group file open (Jason Gunthorpe)

- Fix error code and hi/lo register manipulation issues in the hisi_acc
   variant driver, along with various code cleanups (Longfang Liu)

- Fix a prior regression in GVT-g group teardown, resulting in
   unreleased resources (Jason Gunthorpe)

- A significant cleanup and simplification of the mdev interface,
   consolidating much of the open coded per driver sysfs interface
   support into the mdev core (Christoph Hellwig)

- Simplification of tracking and locking around vfio_groups that fall
   out from previous refactoring (Jason Gunthorpe)

- Replace trivial open coded f_ops tests with new helper (Alex
   Williamson)

* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
  vfio: More vfio_file_is_group() use cases
  vfio: Make the group FD disassociate from the iommu_group
  vfio: Hold a reference to the iommu_group in kvm for SPAPR
  vfio: Add vfio_file_is_group()
  vfio: Change vfio_group->group_rwsem to a mutex
  vfio: Remove the vfio_group->users and users_comp
  vfio/mdev: add mdev available instance checking to the core
  vfio/mdev: consolidate all the description sysfs into the core code
  vfio/mdev: consolidate all the available_instance sysfs into the core code
  vfio/mdev: consolidate all the name sysfs into the core code
  vfio/mdev: consolidate all the device_api sysfs into the core code
  vfio/mdev: remove mtype_get_parent_dev
  vfio/mdev: remove mdev_parent_dev
  vfio/mdev: unexport mdev_bus_type
  vfio/mdev: remove mdev_from_dev
  vfio/mdev: simplify mdev_type handling
  vfio/mdev: embedd struct mdev_parent in the parent data structure
  vfio/mdev: make mdev.h standalone includable
  drm/i915/gvt: simplify vgpu configuration management
  drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
  ...

Merge tag 'for-linus-6.1-rc1-tag' of git://git./linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

- Some minor typo fixes

- A fix of the Xen pcifront driver for supporting the device model to
   run in a Linux stub domain

- A cleanup of the pcifront driver

- A series to enable grant-based virtio with Xen on x86

- A cleanup of Xen PV guests to distinguish between safe and faulting
   MSR accesses

- Two fixes of the Xen gntdev driver

- Two fixes of the new xen grant DMA driver

* tag 'for-linus-6.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Kconfig: Fix spelling mistake "Maxmium" -> "Maximum"
  xen/pv: support selecting safe/unsafe msr accesses
  xen/pv: refactor msr access functions to support safe and unsafe accesses
  xen/pv: fix vendor checks for pmu emulation
  xen/pv: add fault recovery control to pmu msr accesses
  xen/virtio: enable grant based virtio on x86
  xen/virtio: use dom0 as default backend for CONFIG_XEN_VIRTIO_FORCE_GRANT
  xen/virtio: restructure xen grant dma setup
  xen/pcifront: move xenstore config scanning into sub-function
  xen/gntdev: Accommodate VMA splitting
  xen/gntdev: Prevent leaking grants
  xen/virtio: Fix potential deadlock when accessing xen_grant_dma_devices
  xen/virtio: Fix n_pages calculation in xen_grant_dma_map(unmap)_page()
  xen/xenbus: Fix spelling mistake "hardward" -> "hardware"
  xen-pcifront: Handle missed Connected state

Merge tag 'mm-hotfixes-stable-2022-10-11' of git://git./linux/kernel/git/akpm/mm

Pull misc hotfixes from Andrew Morton:
"Five hotfixes - three for nilfs2, two for MM. For are cc:stable, one
  is not"

* tag 'mm-hotfixes-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix leak of nilfs_root in case of writer thread creation failure
  nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()
  nilfs2: fix use-after-free bug of struct nilfs_root
  mm/damon/core: initialize damon_target->list in damon_new_target()
  mm/hugetlb: fix races when looking up a CONT-PTE/PMD size hugetlb page

Merge tag 'mm-nonmm-stable-2022-10-11' of git://git./linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

- hfs and hfsplus kmap API modernization (Fabio Francesco)

- make crash-kexec work properly when invoked from an NMI-time panic
   (Valentin Schneider)

- ntfs bugfixes (Hawkins Jiawei)

- improve IPC msg scalability by replacing atomic_t's with percpu
   counters (Jiebin Sun)

- nilfs2 cleanups (Minghao Chi)

- lots of other single patches all over the tree!

* tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
  include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype
  proc: test how it holds up with mapping'less process
  mailmap: update Frank Rowand email address
  ia64: mca: use strscpy() is more robust and safer
  init/Kconfig: fix unmet direct dependencies
  ia64: update config files
  nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
  fork: remove duplicate included header files
  init/main.c: remove unnecessary (void*) conversions
  proc: mark more files as permanent
  nilfs2: remove the unneeded result variable
  nilfs2: delete unnecessary checks before brelse()
  checkpatch: warn for non-standard fixes tag style
  usr/gen_init_cpio.c: remove unnecessary -1 values from int file
  ipc/msg: mitigate the lock contention with percpu counter
  percpu: add percpu_counter_add_local and percpu_counter_sub_local
  fs/ocfs2: fix repeated words in comments
  relay: use kvcalloc to alloc page array in relay_alloc_page_array
  proc: make config PROC_CHILDREN depend on PROC_FS
  fs: uninline inode_maybe_inc_iversion()
  ...

tracing: Fix reading strings from synthetic events

The follow commands caused a crash:

  # cd /sys/kernel/tracing
  # echo 's:open char file[]' > dynamic_events
  # echo 'hist:keys=common_pid:file=filename:onchange($file).trace(open,$file)' > events/syscalls/sys_enter_openat/trigger'
  # echo 1 > events/synthetic/open/enable

BOOM!

The problem is that the synthetic event field "char file[]" will read
the value given to it as a string without any memory checks to make sure
the address is valid. The above example will pass in the user space
address and the sythetic event code will happily call strlen() on it
and then strscpy() where either one will cause an oops when accessing
user space addresses.

Use the helper functions from trace_kprobe and trace_eprobe that can
read strings safely (and actually succeed when the address is from user
space and the memory is mapped in).

Now the above can show:

     packagekitd-1721    [000] ...2.   104.597170: open: file=/usr/lib/rpm/fileattrs/cmake.attr
    in:imjournal-978     [006] ...2.   104.599642: open: file=/var/lib/rsyslog/imjournal.state.tmp
     packagekitd-1721    [000] ...2.   104.626308: open: file=/usr/lib/rpm/fileattrs/debuginfo.attr

Link: https://lkml.kernel.org/r/20221012104534.826549315@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Add "(fault)" name injection to kernel probes

Have the specific functions for kernel probes that read strings to inject
the "(fault)" name directly. trace_probes.c does this too (for uprobes)
but as the code to read strings are going to be used by synthetic events
(and perhaps other utilities), it simplifies the code by making sure those
other uses do not need to implement the "(fault)" name injection as well.

Link: https://lkml.kernel.org/r/20221012104534.644803645@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Move duplicate code of trace_kprobe/eprobe.c into header

The functions:

  fetch_store_strlen_user()
  fetch_store_strlen()
  fetch_store_string_user()
  fetch_store_string()

are identical in both trace_kprobe.c and trace_eprobe.c. Move them into
a new header file trace_probe_kernel.h to share it. This code will later
be used by the synthetic events as well.

Marked for stable as a fix for a crash in synthetic events requires it.

Link: https://lkml.kernel.org/r/20221012104534.467668078@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'loongarch-6.1' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

- Use EXPLICIT_RELOCS (ABIv2.0)

- Use generic BUG() handler

- Refactor TLB/Cache operations

- Add qspinlock support

- Add perf events support

- Add kexec/kdump support

- Add BPF JIT support

- Add ACPI-based laptop driver

- Update the default config file

* tag 'loongarch-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
  LoongArch: Update Loongson-3 default config file
  LoongArch: Add ACPI-based generic laptop driver
  LoongArch: Add BPF JIT support
  LoongArch: Add some instruction opcodes and formats
  LoongArch: Move {signed,unsigned}_imm_check() to inst.h
  LoongArch: Add kdump support
  LoongArch: Add kexec support
  LoongArch: Use generic BUG() handler
  LoongArch: Add SysRq-x (TLB Dump) support
  LoongArch: Add perf events support
  LoongArch: Add qspinlock support
  LoongArch: Use TLB for ioremap()
  LoongArch: Support access filter to /dev/mem interface
  LoongArch: Refactor cache probe and flush methods
  LoongArch: mm: Refactor TLB exception handlers
  LoongArch: Support R_LARCH_GOT_PC_{LO12,HI20} in modules
  LoongArch: Support PC-relative relocations in modules
  LoongArch: Define ELF relocation types added in ABIv2.0
  LoongArch: Adjust symbol addressing for AS_HAS_EXPLICIT_RELOCS
  LoongArch: Add Kconfig option AS_HAS_EXPLICIT_RELOCS
  ...

Merge tag 'irq-core-2022-10-12' of git://git./linux/kernel/git/tip/tip

Pull interrupt updates from Thomas Gleixner:
"Core code:

   - Provide a generic wrapper which can be utilized in drivers to
     handle the problem of force threaded demultiplex interrupts on RT
     enabled kernels. This avoids conditionals and horrible quirks in
     drivers all over the place

   - Fix up affected pinctrl and GPIO drivers to make them cleanly RT
     safe

  Interrupt drivers:

   - A new driver for the FSL MU platform specific MSI implementation

   - Make irqchip_init() available for pure ACPI based systems

   - Provide a functional DT binding for the Realtek RTL interrupt chip

   - The usual DT updates and small code improvements all over the
     place"

* tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  irqchip: IMX_MU_MSI should depend on ARCH_MXC
  irqchip/imx-mu-msi: Fix wrong register offset for 8ulp
  irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
  dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
  irqchip: Add IMX MU MSI controller driver
  dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
  irqchip/gic-v3: Fix typo in comment
  dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
  dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
  irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END
  platform-msi: Export symbol platform_msi_create_irq_domain()
  irqchip/realtek-rtl: use parent interrupts
  dt-bindings: interrupt-controller: realtek,rtl-intc: require parents
  irqchip/realtek-rtl: use irq_domain_add_linear()
  irqchip: Make irqchip_init() usable on pure ACPI systems
  bcma: gpio: Use generic_handle_irq_safe()
  gpio: mlxbf2: Use generic_handle_irq_safe()
  platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe()
  ssb: gpio: Use generic_handle_irq_safe()
  pinctrl: amd: Use generic_handle_irq_safe()
  ...

ring-buffer: Fix kernel-doc

kernel/trace/ring_buffer.c:895: warning: expecting prototype for ring_buffer_nr_pages_dirty(). Prototype was for ring_buffer_nr_dirty_pages() instead.
kernel/trace/ring_buffer.c:5313: warning: expecting prototype for ring_buffer_reset_cpu(). Prototype was for ring_buffer_reset_online_cpus() instead.
kernel/trace/ring_buffer.c:5382: warning: expecting prototype for rind_buffer_empty(). Prototype was for ring_buffer_empty() instead.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2340
Link: https://lkml.kernel.org/r/20221009020642.12506-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

mctp: prevent double key removal and unref

Currently, we have a bug where a simultaneous DROPTAG ioctl and socket
close may race, as we attempt to remove a key from lists twice, and
perform an unref for each removal operation. This may result in a uaf
when we attempt the second unref.

This change fixes the race by making __mctp_key_remove tolerant to being
called on a key that has already been removed from the socket/net lists,
and only performs the unref when we do the actual remove. We also need
to hold the list lock on the ioctl cleanup path.

This fix is based on a bug report and comprehensive analysis from
butt3rflyh4ck <butterflyhuangxx@gmail.com>, found via syzkaller.

Cc: stable@vger.kernel.org
Fixes: 63ed1aab3d40 ("mctp: Add SIOCMCTP{ALLOC,DROP}TAG ioctls for tag control")
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/netfilter/nf

Florian Westphal says:

====================
netfilter fixes for net

This series from Phil Sutter for the *net* tree fixes a problem with a change
from the 6.1 development phase: the change to nft_fib should have used
the more recent flowic_l3mdev field. Pointed out by Guillaume Nault.
This also makes the older iptables module follow the same pattern.

Also add selftest case and avoid test failure in nft_fib.sh when the
host environment has set rp_filter=1.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1

If net.ipv4.conf.all.rp_filter is set, it overrides the per-interface
setting and thus defeats the fix from bbe4c0896d250 ("selftests:
netfilter: disable rp_filter on router"). Unset it as well to cover that
case.

Fixes: bbe4c0896d250 ("selftests: netfilter: disable rp_filter on router")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: rpfilter/fib: Populate flowic_l3mdev field

Use the introduced field for correct operation with VRF devices instead
of conditionally overwriting flowic_oif. This is a partial revert of
commit b575b24b8eee3 ("netfilter: Fix rpfilter dropping vrf packets by
mistake"), implementing a simpler solution.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

selftests: netfilter: Test reverse path filtering

Test reverse path (filter) matches in iptables, ip6tables and nftables.
Both with a regular interface and a VRF.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

ftrace: Fix char print issue in print_ip_ins()

When ftrace bug happened, following log shows every hex data in
problematic ip address:
actual: ffffffe8:6b:ffffffd9:01:21

But so many 'f's seem a little confusing, and that is because format
'%x' being used to print signed chars in array 'ins'. As suggested
by Joe, change to use format "%*phC" to print array 'ins'.

After this patch, the log is like:
actual: e8:6b:d9:01:21

Link: https://lkml.kernel.org/r/20221011120352.1878494-1-zhengyejian1@huawei.com
Fixes: 6c14133d2d3f ("ftrace: Do not blindly read the ip address in ftrace_bug()")
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

LoongArch: Update Loongson-3 default config file

1, Enable ZBOOT, KEXEC and BPF_JIT;
2, Add more patition types;
3, Add some USB Type-C options;
4, Add some common network options;
5, Add some Bluetooth device drivers;
6, Remove obsolete config options (for some detailed information, see
Link).

Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/
Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Add ACPI-based generic laptop driver

This add ACPI-based generic laptop driver for Loongson-3. Some of the
codes are derived from drivers/platform/x86/thinkpad_acpi.c.

Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Add BPF JIT support

BPF programs are normally handled by a BPF interpreter, add BPF JIT
support for LoongArch to allow the kernel to generate native code when
a program is loaded into the kernel. This will significantly speed-up
processing of BPF programs.

Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Add some instruction opcodes and formats

According to the "Table of Instruction Encoding" in LoongArch Reference
Manual [1], add some instruction opcodes and formats which are used in
the BPF JIT for LoongArch.

[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#table-of-instruction-encoding

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Move {signed,unsigned}_imm_check() to inst.h

{signed,unsigned}_imm_check() will also be used in the bpf jit, so move
them from module.c to inst.h, this is preparation for later patches.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Add kdump support

This patch adds support for kdump. In kdump case the normal kernel will
reserve a region for the crash kernel and jump there on panic.

Arch-specific functions are added to allow for implementing a crash dump
file interface, /proc/vmcore, which can be viewed as a ELF file.

A user-space tool, such as kexec-tools, is responsible for allocating a
separate region for the core's ELF header within the crash kdump kernel
memory and filling it in when executing kexec_load().

Then, its location will be advertised to the crash dump kernel via a
command line argument "elfcorehdr=", and the crash dump kernel will
preserve this region for later use with arch_reserve_vmcore() at boot
time.

At the same time, the crash kdump kernel is also limited within the
"crashkernel" area via a command line argument "mem=", so as not to
destroy the original kernel dump data.

In the crash dump kernel environment, /proc/vmcore is used to access the
primary kernel's memory with copy_oldmem_page().

I tested kdump on LoongArch machines (Loongson-3A5000) and it works as
expected (suggested crashkernel parameter is "crashkernel=512M@2560M"),
you may test it by triggering a crash through /proc/sysrq-trigger:

$ sudo kexec -p /boot/vmlinux-kdump --reuse-cmdline --append="nr_cpus=1"
# echo c > /proc/sysrq-trigger

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Add kexec support

Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to
the LoongArch architecture, so as to add support for the kexec re-boot
mechanism (CONFIG_KEXEC) on LoongArch platforms.

Kexec supports loading vmlinux.elf in ELF format and vmlinux.efi in PE
format.

I tested kexec on LoongArch machines (Loongson-3A5000) and it works as
expected:

$ sudo kexec -l /boot/vmlinux.efi --reuse-cmdline
$ sudo kexec -e

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Use generic BUG() handler

Inspired by commit 9fb7410f955("arm64/BUG: Use BRK instruction for
generic BUG traps"), do similar for LoongArch to use generic BUG()
handler.

This patch uses the BREAK software breakpoint instruction to generate
a trap instead, similarly to most other arches, with the generic BUG
code generating the dmesg boilerplate.

This allows bug metadata to be moved to a separate table and reduces
the amount of inline code at BUG() and WARN() sites. This also avoids
clobbering any registers before they can be dumped.

To mitigate the size of the bug table further, this patch makes use of
the existing infrastructure for encoding addresses within the bug table
as 32-bit relative pointers instead of absolute pointers.

(Note: this limits the max kernel size to 2GB.)

Before patch:
[ 3018.338013] lkdtm: Performing direct entry BUG
[ 3018.342445] Kernel bug detected[#5]:
[ 3018.345992] CPU: 2 PID: 865 Comm: cat Tainted: G D 6.0.0-rc6+ #35

After patch:
[  125.585985] lkdtm: Performing direct entry BUG
[  125.590433] ------------[ cut here ]------------
[  125.595020] kernel BUG at drivers/misc/lkdtm/bugs.c:78!
[  125.600211] Oops - BUG[#1]:
[  125.602980] CPU: 3 PID: 410 Comm: cat Not tainted 6.0.0-rc6+ #36

Out-of-line file/line data information obtained compared to before.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Add SysRq-x (TLB Dump) support

Add SysRq-x (TLB Dump) support for LoongArch, which is useful for
debugging.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Add perf events support

The perf events infrastructure of LoongArch is very similar to old MIPS-
based Loongson, so most of the codes are derived from MIPS.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Add qspinlock support

On NUMA system, the performance of qspinlock is better than generic
spinlock. Below is the UnixBench test results on a 8 nodes (4 cores
per node, 32 cores in total) machine.

A. With generic spinlock:

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0  449574022.5  38523.9
Double-Precision Whetstone                       55.0      85190.4  15489.2
Execl Throughput                                 43.0      14696.2   3417.7
File Copy 1024 bufsize 2000 maxblocks          3960.0     143157.8    361.5
File Copy 256 bufsize 500 maxblocks            1655.0      37631.8    227.4
File Copy 4096 bufsize 8000 maxblocks          5800.0     444814.2    766.9
Pipe Throughput                               12440.0    5047490.7   4057.5
Pipe-based Context Switching                   4000.0    2021545.7   5053.9
Process Creation                                126.0      23829.8   1891.3
Shell Scripts (1 concurrent)                     42.4      33756.7   7961.5
Shell Scripts (8 concurrent)                      6.0       4062.9   6771.5
System Call Overhead                          15000.0    2479748.6   1653.2
                                                                   ========
System Benchmarks Index Score                                        2955.6

B. With qspinlock:

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0  449467876.9  38514.8
Double-Precision Whetstone                       55.0      85174.6  15486.3
Execl Throughput                                 43.0      14769.1   3434.7
File Copy 1024 bufsize 2000 maxblocks          3960.0     146150.5    369.1
File Copy 256 bufsize 500 maxblocks            1655.0      37496.8    226.6
File Copy 4096 bufsize 8000 maxblocks          5800.0     447527.0    771.6
Pipe Throughput                               12440.0    5175989.2   4160.8
Pipe-based Context Switching                   4000.0    2207747.8   5519.4
Process Creation                                126.0      25125.5   1994.1
Shell Scripts (1 concurrent)                     42.4      33461.2   7891.8
Shell Scripts (8 concurrent)                      6.0       4024.7   6707.8
System Call Overhead                          15000.0    2917278.6   1944.9
                                                                   ========
System Benchmarks Index Score                                        3040.1

Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Use TLB for ioremap()

We can support more cache attributes (e.g., CC, SUC and WUC) and page
protection when we use TLB for ioremap(). The implementation is based
on GENERIC_IOREMAP.

The existing simple ioremap() implementation has better performance so
we keep it and introduce ARCH_IOREMAP to control the selection.

We move pagetable_init() earlier to make early ioremap() works, and we
modify the PCI ecam mapping because the TLB-based version of ioremap()
will actually take the size into account.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Support access filter to /dev/mem interface

Accidental access to /dev/mem is obviously disastrous, but specific
access can be used by people debugging the kernel. So select GENERIC_
LIB_DEVMEM_IS_ALLOWED, as well as define ARCH_HAS_VALID_PHYS_ADDR_RANGE
and related helpers, to support access filter to /dev/mem interface.

Signed-off-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Refactor cache probe and flush methods

Current cache probe and flush methods have some drawbacks:
1, Assume there are 3 cache levels and only 3 levels;
2, Assume L1 = I + D, L2 = V, L3 = S, V is exclusive, S is inclusive.

However, the fact is I + D, I + D + V, I + D + S and I + D + V + S are
all valid. So, refactor the cache probe and flush methods to adapt more
types of cache hierarchy.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: mm: Refactor TLB exception handlers

This patch simplifies TLB load, store and modify exception handlers:

1. Reduce instructions, such as alu/csr and memory access;
2. Execute tlb search instruction only in the fast path;
3. Return directly from the fast path for both normal and huge pages;
4. Re-tab the assembly for better vertical alignment.

And fixes the concurrent modification issue of fast path for huge pages.

This issue will occur in the following steps:

   CPU-1 (In TLB exception)         CPU-2 (In THP splitting)
1: Load PMD entry (HUGE=1)
2: Goto huge path
3:                                  Store PMD entry (HUGE=0)
4: Reload PMD entry (HUGE=0)
5: Fill TLB entry (PA is incorrect)

This patch also slightly improves the TLB processing performance:

* Normal pages: 2.15%, Huge pages: 1.70%.

  #include <stdio.h>
  #include <stdlib.h>
  #include <unistd.h>
  #include <sys/mman.h>

  int main(int argc, char *argv[])
  {
        size_t page_size;
        size_t mem_size;
        size_t off;
        void *base;
        int flags;
        int i;

        if (argc < 2) {
                fprintf(stderr, "%s MEM_SIZE [HUGE]\n", argv[0]);
                return -1;
        }

        page_size = sysconf(_SC_PAGESIZE);
        flags = MAP_PRIVATE | MAP_ANONYMOUS;
        mem_size = strtoul(argv[1], NULL, 10);
        if (argc > 2)
                flags |= MAP_HUGETLB;

        for (i = 0; i < 10; i++) {
                base = mmap(NULL, mem_size, PROT_READ, flags, -1, 0);
                if (base == MAP_FAILED) {
                        fprintf(stderr, "Map memory failed!\n");
                        return -1;
                }

                for (off = 0; off < mem_size; off += page_size)
                        *(volatile int *)(base + off);

                munmap(base, mem_size);
        }

        return 0;
  }

Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Support R_LARCH_GOT_PC_{LO12,HI20} in modules

GCC >= 13 and GNU assembler >= 2.40 use these relocations to address
external symbols, so we need to add them.

Let the module loader emit GOT entries for data symbols so we would be
able to handle GOT relocations. The GOT entry is just the data's symbol
address.

In module.lds, emit a stub .got section for a section header entry. The
actual content of the section entry will be filled at runtime by module_
frob_arch_sections().

Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Support PC-relative relocations in modules

Binutils >= 2.40 uses R_LARCH_B26 instead of R_LARCH_SOP_PUSH_PLT_PCREL,
and R_LARCH_PCALA* instead of R_LARCH_SOP_PUSH_PCREL.

Handle R_LARCH_B26 and R_LARCH_PCALA* in the module loader. For R_LARCH_
B26, also create a PLT entry as needed.

Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Define ELF relocation types added in ABIv2.0

These relocation types are used by GNU binutils >= 2.40 and GCC >= 13.
Add their definitions so we will be able to use them in later patches.

Link: https://github.com/loongson/LoongArch-Documentation/pull/57
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Adjust symbol addressing for AS_HAS_EXPLICIT_RELOCS

If explicit relocation hints are used by the toolchain, -Wa,-mla-*
options will be useless for the C code. So only use them for the
!CONFIG_AS_HAS_EXPLICIT_RELOCS case.

Replace "la" with "la.pcrel" in head.S to keep the semantic consistent
with new and old toolchains for the low level startup code.

For per-CPU variables, the "address" of the symbol is actually an offset
from $r21. The value is near the loading address of main kernel image,
but far from the loading address of modules. So we use model("extreme")
attibute to tell the compiler that a PC-relative addressing with 32-bit
offset is not sufficient for local per-CPU variables.

The behavior with different assemblers and compilers are summarized in
the following table:

AS has            CC has
explicit relocs   explicit relocs * Behavior
==============================================================
No                No                Use la.* macros.
                                    No change from Linux 6.0.
--------------------------------------------------------------
No                Yes               Disable explicit relocs.
                                    No change from Linux 6.0.
--------------------------------------------------------------
Yes               No                Not supported.
--------------------------------------------------------------
Yes               Yes               Enable explicit relocs.
                                    No -Wa,-mla* options used.
==============================================================
*: We assume CC must have model attribute if it has explicit relocs.
   Both features are added in GCC 13 development cycle, so any GCC
   release >= 13 should be OK. Using early GCC 13 development snapshots
   may produce modules with unsupported relocations.

Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=f09482a
Link: https://gcc.gnu.org/r13-1834
Link: https://gcc.gnu.org/r13-2199
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>