OSDN Git Service
Dan Willemsen [Tue, 6 Dec 2016 00:38:14 +0000 (16:38 -0800)]
Remove aidl, proto, objc from soong_problems
We support these in Soong now, so stop marking them in soong_to_convert.
Test: Compare soong_to_convert.txt
Change-Id: I89befdfd8c4eaa04ab626d8be090765a1b879d8b
Treehugger Robot [Fri, 2 Dec 2016 22:48:21 +0000 (22:48 +0000)]
Merge "Add support for creating ext4 images with mke2fs"
Treehugger Robot [Fri, 2 Dec 2016 22:25:42 +0000 (22:25 +0000)]
Merge "Sort SELinux package inclusion."
Colin Cross [Fri, 2 Dec 2016 21:47:57 +0000 (21:47 +0000)]
Merge "Fix warning with AAPT2 and LOCAL_STATIC_ANDROID_LIBRARIES"
dcashman [Fri, 2 Dec 2016 17:32:15 +0000 (09:32 -0800)]
Sort SELinux package inclusion.
This section will be modified as part of splitting these packages into platform
and non-platform components. Sort them all to avoid conflicts.
Bug:
31363362
Test: Builds
Change-Id: I91fb4d4d7c0a6971a19047ef2eb2981770a122ff
Tao Bao [Fri, 2 Dec 2016 15:09:13 +0000 (15:09 +0000)]
Merge "Build recovery-two-step.img for two-step OTAs."
Tao Bao [Wed, 30 Nov 2016 20:11:57 +0000 (12:11 -0800)]
Build recovery-two-step.img for two-step OTAs.
In two-step OTAs, we write recovery image to /boot as the first step so
that we can reboot from there and install a new recovery image to
/recovery. However, bootloader will show "Your device is corrupt"
message when booting /boot with the recovery image. Because the recovery
image encodes the path of "/recovery" as part of the signature metadata,
which fails the verified boot.
This CL generates a special "recovery-two-step.img" in addition to the
regular recovery.img. This image encodes "/boot" when being signed,
which will be flashed to /boot at stage 1/3 in a two-step OTA.
Here are the desired changes:
- 'IMAGES/recovery-two-step.img' exists in target_files.zip for non-A/B
targets (e.g. bullhead). The image should not exist for targets that
don't have a recovery partition (e.g. A/B devices like sailfish).
- <device>-img.zip should not contain 'recovery-two-step.img'.
- Nothing should change when building non-two-step OTAs. For two-step
OTAs, 'recovery-two-step.img' should be included in the OTA package;
'updater-script' should flash this image to /boot at stage 1/3.
- When building a two-step OTA with an input TF.zip that doesn't have
IMAGES/recovery-two-step.img, it should use the existing
IMAGES/recovery.img instead.
Bug:
32986477
Test: Tested the steps above on bullhead and sailfish.
Change-Id: I34e6c599bcf2011d4cd5c926999418b3975d6d0f
Pirama Arumuga Nainar [Thu, 1 Dec 2016 17:58:46 +0000 (17:58 +0000)]
Merge "Do not *directly* package libbcc.so"
Tao Bao [Thu, 1 Dec 2016 17:02:06 +0000 (17:02 +0000)]
Merge "releasetools: Remove dead parameter in GetBootableImage()."
Paul Duffin [Thu, 1 Dec 2016 10:34:07 +0000 (10:34 +0000)]
Merge "Replace core-junit with legacy-test"
Tao Bao [Thu, 1 Dec 2016 08:08:05 +0000 (00:08 -0800)]
releasetools: Remove dead parameter in GetBootableImage().
The 'system_img_path' parameter was introduced in commit
d995f4b04df46d9e9ac1be8d58ca961e94b783d1, but became obsolete since
commit
2ce63edab715ae4ff34e1a2ef240b05216f6ca5d.
Test: m dist
Change-Id: Iffd496d929db5cc3dfc955a48bfc1b1317bd012f
Treehugger Robot [Thu, 1 Dec 2016 02:38:29 +0000 (02:38 +0000)]
Merge changes from topic 'simplify_app_process_asan_modules'
* changes:
Revert "Build: Add sanitized app_process"
Revert "Build: Add asanwrapper in SANITIZE_LITE"
Andreas Gampe [Wed, 30 Nov 2016 23:38:43 +0000 (15:38 -0800)]
Revert "Build: Add sanitized app_process"
This reverts commit
a35d92e4312b2247b0a27e17a6f08f82dae49fdf.
The app_process__asan module is merged into app_process.
Bug:
33224213
Test: m
Change-Id: I5e3e836c67b5bd17cf967f1b2429e39c4e18557b
Andreas Gampe [Wed, 30 Nov 2016 23:38:31 +0000 (15:38 -0800)]
Revert "Build: Add asanwrapper in SANITIZE_LITE"
This reverts commit
eee31511f70398ada44c7f8811234311ce8c7a7f.
Rewriting of app_process adds an automatic dependency.
Bug:
33224213
Test: m
Change-Id: Idd9509d116692954224f4d2ffd6c81b69e9a85a3
Pirama Arumuga Nainar [Wed, 30 Nov 2016 23:40:43 +0000 (15:40 -0800)]
Do not *directly* package libbcc.so
Bug: http://b/
28866258
Remove libbcc.so from the list of directly packaged modules. 64-bit
libbcc.so gets included as a dependency for the bcc executable (which is
a required package). 32-bit libbcc.so is no longer necessary on 64-bit
devices.
This change also removes 32-bit libLLVM.so from a 64-bit system image
(leading to a 13M reduction in Angler's system image on AOSP) and a
considerable reduction in build time.
Test: - Build all topics in this CL
- RsTest (including the 32-bit ABI) and CTS tests pass on x86 and
x86_64 emulators and Angler.
Change-Id: I10f07e322a615f37d6967b7c938635f544ddceff
Treehugger Robot [Wed, 30 Nov 2016 21:00:55 +0000 (21:00 +0000)]
Merge changes from topic 'app_process_sanitized_binaries'
* changes:
Build: Add asanwrapper in SANITIZE_LITE
Build: Add sanitized app_process
Andreas Gampe [Wed, 30 Nov 2016 18:20:20 +0000 (10:20 -0800)]
Build: Add asanwrapper in SANITIZE_LITE
Add asanwrapper helper binary to PRODUCT_PACKAGES when building with
SANITIZE_LITE=true.
Bug:
33224213
Test: m SANITIZE_TARGET=address SANITIZE_LITE=true && ls $OUT/system/bin/asanwrapper
Change-Id: Ic4d8973b9e9ddfd9ef8663735bf5f70d8f9f70e1
Paul Duffin [Tue, 29 Nov 2016 12:15:13 +0000 (12:15 +0000)]
Replace core-junit with legacy-test
m -j32 checkbuild cts droid
adb reboot bootloader
fastboot flashall -w
cts-tradefed run cts -m CtsLibcoreTestCases
Bug:
30188076
Test: As above
Change-Id: I2d49cb3c451cb265d026f9a700a61b3fc0d2ed82
Andreas Gampe [Wed, 30 Nov 2016 03:22:01 +0000 (19:22 -0800)]
Build: Add sanitized app_process
Add sanitized app_process module to PRODUCT_PACKAGES when building
with SANITIZE_LITE=true
Bug:
33224213
Test: m SANITIZE_TARGET=address SANITIZE_LITE=true && ls $OUT/system/bin/asan
Change-Id: Ic67976f1b897b638d569ec6f42d5a8d59f8a9285
Treehugger Robot [Wed, 30 Nov 2016 00:39:33 +0000 (00:39 +0000)]
Merge "Revert "Build: Bring back SDK dependencies""
Treehugger Robot [Tue, 29 Nov 2016 20:36:04 +0000 (20:36 +0000)]
Merge changes from topic 'basic_vndk'
* changes:
Prohibit host modules from using LOCAL_COPY_HEADERS
Add basic VNDK support in Make
Remove GLOBAL_LD_DIRS
Colin Cross [Tue, 29 Nov 2016 19:12:56 +0000 (11:12 -0800)]
Fix warning with AAPT2 and LOCAL_STATIC_ANDROID_LIBRARIES
Building with LOCAL_STATIC_ANDROID_LIBARIES and LOCAL_USE_APPT2
causes a warning:
build/core/package_internal.mk:143: Empty argument supplied to find-subdir-assets
Only call find-subdir-assets if my_res_dir is not empty.
Also improve the warning message to make it easier to find the module
that caused it.
Test: m -j
Change-Id: I9a71162c7e2ed82f64d6844baca256968ac77317
Dan Willemsen [Wed, 23 Nov 2016 00:17:38 +0000 (16:17 -0800)]
Prohibit host modules from using LOCAL_COPY_HEADERS
There are no users left, so remove all of this.
Test: lunch aosp_arm-eng; m -j native
Test: build/tools/kati_all_products.sh on aosp and internal master
Change-Id: I32f5c8b470a43dd203d7e20c192167630e4e6888
Dan Willemsen [Fri, 18 Nov 2016 22:05:39 +0000 (14:05 -0800)]
Add basic VNDK support in Make
Add BOARD_VNDK_VERSION and LOCAL_USE_VNDK to specify the version of the
VNDK that will be used globally, and whether to use the VNDK on a module
basis.
If the board is using the VNDK:
* LOCAL_COPY_HEADERS may only be used by modules defining LOCAL_USE_VNDK
* LOCAL_USE_VNDK modules will compile against the NDK headers and stub
libraries, but continue to use the platform libc++.
* LOCAL_USE_VNDK modules will not have the global includes like
system/core/include, but it will use device-specific kernel headers.
This change does not attempt to enforce any linking constraints, that
will come in a later patch.
Test: out/build-aosp_arm.ninja is identical before/after
Change-Id: Icce65d4974f085093d500b5b2516983788fe2905
Dan Willemsen [Tue, 22 Nov 2016 23:13:56 +0000 (15:13 -0800)]
Remove GLOBAL_LD_DIRS
The last user of this was the NDK, which has been using full paths in
binary.mk. So remove it.
Test: lunch aosp_arm-eng; m -j native
Change-Id: Ida2523a2d19131ee3ef005edb3e5bcf830710b11
Tao Bao [Mon, 28 Nov 2016 18:04:04 +0000 (18:04 +0000)]
Merge "Makefile: Pack verity_verifier into otatools.zip."
Tao Bao [Sat, 19 Nov 2016 01:04:24 +0000 (17:04 -0800)]
Makefile: Pack verity_verifier into otatools.zip.
verity_verifier is needed when verifying verity metadata.
Bug:
32173582
Test: `m otatools-package`
Change-Id: I63fdeb75cdca10ea38c1df978d64701acdd4c1db
Ian Rogers [Tue, 22 Nov 2016 18:43:50 +0000 (18:43 +0000)]
Merge "Update warn.py for new Error Prone diagnostics"
Nick Glorioso [Tue, 15 Nov 2016 23:57:57 +0000 (15:57 -0800)]
Update warn.py for new Error Prone diagnostics
Test: Local build, tee'd to file, ran warn.py and checked output HTML
Change-Id: Iee3386e88c73e4b8e0a1fcc60105ee5fb86e3cb0
Adrien Schildknecht [Sat, 19 Nov 2016 01:06:29 +0000 (17:06 -0800)]
Add support for creating ext4 images with mke2fs
We are investigating replacing make_ext4fs with the upstream tool mke2fs.
To mitigate the trouble that may arise if the new tool behave differently
compared to the old one, there will be a transition period.
Devices that want to use the new way of creating ext4 images can set the
variable "TARGET_USES_MKE2FS" to true in their BoardConfig.mk
By default, the build system will choose the old tool 'make_ext4fs'.
Test: m otapackage with TARGET_USES_MKE2FS={,false,true}
Change-Id: I282bcb9efe335a86c53986283090ca947d65c7f8
Treehugger Robot [Fri, 18 Nov 2016 19:04:39 +0000 (19:04 +0000)]
Merge "Support `LOCAL_SDK_VERSION := current` for NDK."
Andreas Gampe [Fri, 18 Nov 2016 03:42:51 +0000 (19:42 -0800)]
Revert "Build: Bring back SDK dependencies"
This reverts commit
ff00c5d78faeacfaae1abc69d69d7cd8c0e9d3ff.
Test: m
Andreas Gampe [Fri, 18 Nov 2016 02:53:28 +0000 (02:53 +0000)]
Merge "Build: Bring back SDK dependencies"
Andreas Gampe [Fri, 18 Nov 2016 02:21:36 +0000 (18:21 -0800)]
Build: Bring back SDK dependencies
Temporarily re-add SDK dependencies to runtime_libart.mk.
Test: m sdk_repo
Change-Id: I5c2054d7be6ea1c5e6eadbcb3453cabfc64728d6
Treehugger Robot [Fri, 18 Nov 2016 01:25:53 +0000 (01:25 +0000)]
Merge "Build: Refactor and clean up runtime_libart"
Treehugger Robot [Fri, 18 Nov 2016 00:29:52 +0000 (00:29 +0000)]
Merge "fs_config: move sort to be consistent with other sort"
Treehugger Robot [Thu, 17 Nov 2016 23:30:50 +0000 (23:30 +0000)]
Merge "fs_config: correct README"
Treehugger Robot [Thu, 17 Nov 2016 23:17:08 +0000 (23:17 +0000)]
Merge "Build: Add agent library to default packages"
Andreas Gampe [Thu, 17 Nov 2016 21:54:49 +0000 (13:54 -0800)]
Build: Refactor and clean up runtime_libart
Split out dependencies and removes some transitives. In preparation
for moving the modules.
Test: m
Test: Device boots
Change-Id: I7cdccd178eef9a625607a74ba8496651591e4cb4
William Roberts [Sat, 9 Apr 2016 05:06:19 +0000 (22:06 -0700)]
fs_config: move sort to be consistent with other sort
Test: Checked diff and hash of before and after output files, same.
Test: Tested build for basic boot and functionality.
Change-Id: If7806427e3a2a9ddb7a2c9aa14e1e4f9bf696acf
Signed-off-by: William Roberts <william.c.roberts@intel.com>
William Roberts [Sat, 9 Apr 2016 17:24:25 +0000 (10:24 -0700)]
fs_config: correct README
Testing on earlier versions of Python indicated an error in the
README. Python's ConfigParser prior to version 3.2 allows for
sections within the same file to override later sections.
Correct the README.
Test: Checked diff and hash of output file from before and after.
Change-Id: Ifd3f78414b4803e4b74decb1fdf6816d4902c4a2
Signed-off-by: William Roberts <william.c.roberts@intel.com>
Andreas Gampe [Thu, 27 Oct 2016 20:23:29 +0000 (13:23 -0700)]
Build: Add agent library to default packages
Add libopenjdkjvmti to ART dependencies.
Bug:
31455788
Test: m && ls $OUT/system/lib/libopenjdkjvmti.so
Change-Id: Iccf35f04548d74df87ec05f2cb555c1db9d137c6
Chih-hung Hsieh [Tue, 15 Nov 2016 22:19:36 +0000 (22:19 +0000)]
Merge "Separate parallel_classify_warnings out of parse_input_file."
Treehugger Robot [Tue, 15 Nov 2016 19:21:12 +0000 (19:21 +0000)]
Merge "Add webview_zygote target to core_minimal.mk PRODUCT_PACKAGES."
Dan Willemsen [Sun, 13 Nov 2016 19:53:38 +0000 (19:53 +0000)]
Merge "Use new -ninja flag to aidl-cpp"
Dan Willemsen [Sun, 13 Nov 2016 17:42:19 +0000 (09:42 -0800)]
Use new -ninja flag to aidl-cpp
This make aidl-cpp write out a dep file that ninja parses correctly.
Test: Manually inspect ninja depfile
Change-Id: I4890a91eb29a6388e17b1ffac23a3dc0ffe6c212
Dan Willemsen [Fri, 11 Nov 2016 21:38:53 +0000 (21:38 +0000)]
Merge "Remove transform-d-to-p"
Robert Sesek [Fri, 11 Nov 2016 17:38:13 +0000 (12:38 -0500)]
Add webview_zygote target to core_minimal.mk PRODUCT_PACKAGES.
Test: lunch aosp_angler-eng && m checkbuild
Bug:
21643067
Change-Id: I1e0b81055fb74d7238f245e11bf2409c776f2efd
Dan Willemsen [Fri, 11 Nov 2016 02:19:36 +0000 (18:19 -0800)]
Remove transform-d-to-p
Ninja doesn't need the phony make targets, in fact, the parser doesn't
handle them correctly and ends up duplicating the dependencies. This
shrinks a `m native` deps file from 54M -> 35M on AOSP.
Test: Compare out/build-aosp_angler.ninja before/after
Test: wrote a tool to dump the .ninja_deps, added dedup feature, files
identical after dedup.
Change-Id: Iec7a9a0739e8678c1f4db79c68e423a39b9aad4b
Dan Willemsen [Fri, 11 Nov 2016 05:35:04 +0000 (05:35 +0000)]
Merge "Fix vendor/google/build/ninja_config.mk"
Dan Willemsen [Fri, 11 Nov 2016 03:41:27 +0000 (19:41 -0800)]
Fix vendor/google/build/ninja_config.mk
This needs to be included between PARSE_TIME_MAKE_GOALS and KATI_GOALS
Test: m -j <target-from-internal>
Change-Id: I7284f05336b921d40f04ff5811a47bd0d17a066f
Dan Willemsen [Thu, 10 Nov 2016 22:41:24 +0000 (22:41 +0000)]
Merge changes I1bc291aa,Ib3ec8aa8
* changes:
Split (ninja|soong).mk into config and rule portions
Move some configuration from main.mk to config.mk
Chih-Hung Hsieh [Thu, 10 Nov 2016 02:19:05 +0000 (18:19 -0800)]
Separate parallel_classify_warnings out of parse_input_file.
* Allow other callers of this module to:
* pass any input stream to parse_input_file,
* pass any warning_lines to parallel_classify_warnings,
* call dump_csv or dump_html to get output.
* No output change.
* Capture and ignore signal.SIGTERM at the end,
to avoid bad warning/error messages from the exit clean-up process.
Test: run warn.py build.log.
Change-Id: I1414797a536c0ee622e2a34c226578621be1ddab
Dan Willemsen [Thu, 10 Nov 2016 01:22:15 +0000 (17:22 -0800)]
Split (ninja|soong).mk into config and rule portions
So that an external tool can read the configuration using
dump-many-vars, and write out the soong.variables file while only
loading config.mk.
Also remove dumpvar-% from PARSE_TIME_MAKE_GOALS, since it's only used
with CALLED_FROM_SETUP / config.mk. This provides an easy way to test
this change as well.
Test: get_build_var NINJA
Test: get_build_var ANDROID_GOALS
Test: get_build_var NINJA_GOALS
Test: get_build_var KATI_GOALS
Test: MAKECMDGOALS="droid sdk dumpvar-ANDROID_GOALS" get_build_var ANDROID_GOALS
Test: MAKECMDGOALS="droid sdk dumpvar-NINJA_GOALS" get_build_var NINJA_GOALS
Test: MAKECMDGOALS="droid sdk dumpvar-KATI_GOALS" get_build_var KATI_GOALS
Test: MAKECMDGOALS="out/build-a.ninja dumpvar-ANDROID_GOALS" get_build_var ANDROID_GOALS
Test: get_build_var SOONG_MAKEVARS_MK
Test: get_build_var SOONG_VARIABLES
Test: CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core make -f build/core/config.mk out/soong/soong.variables showcommands
Test: Compare soong.variables from above, and before/after with `m`
Test: Compare out before/after with `m doesnotexist`
Test: `m dist doesnotexist`
Change-Id: I1bc291aa165297c930fe600067edad6ce4979210
Dan Willemsen [Thu, 10 Nov 2016 00:35:34 +0000 (16:35 -0800)]
Move some configuration from main.mk to config.mk
When dumping make configuration (dump-many-var, dump-var-*), we only
load config.mk, not main.mk. One of the first things that main.mk does
is to include config.mk, so these moves are safe.
Turning off the implicit rules and other make configuration / sanity
checks should happen in all cases, so move them to config.mk
Move dont_bother_rules to config.mk so that it can be used by the ninja
configuration (which is moving in a later change). Move dont_bother into
the kati section, since it's not used elsewhere.
Test: m clean
Test: get_build_var dont_bother_goals
Change-Id: Ib3ec8aa8eebcaf743d2cdcc31f89827c4e8470a1
Clay Murphy [Wed, 9 Nov 2016 21:18:37 +0000 (21:18 +0000)]
Merge "Creates a css nowrap class for non-breaking elements in source.android.com Test: build2stage 36"
Billy Lamberta [Mon, 24 Oct 2016 21:38:19 +0000 (14:38 -0700)]
Creates a css nowrap class for non-breaking elements
in source.android.com
Test: build2stage 36
Change-Id: I467cc66d5e205b00ed188180140b1ae972e2ebad
Dan Albert [Tue, 8 Nov 2016 23:10:09 +0000 (15:10 -0800)]
Support `LOCAL_SDK_VERSION := current` for NDK.
Test: Added a module using this and checked the link command line.
Bug: None
Change-Id: I3a55e4638340d8835c09ebc6a1440bece962d36e
Tao Bao [Tue, 8 Nov 2016 23:31:50 +0000 (23:31 +0000)]
Merge "releasetools: Use java_path in sign_target_files_apks.py."
Tao Bao [Tue, 8 Nov 2016 20:08:53 +0000 (12:08 -0800)]
releasetools: Use java_path in sign_target_files_apks.py.
Prior to this CL, it was calling the hard-coded "java" although it was
accepting a "--java_path" option.
Also switch OPTIONS.java_args from string to list. Otherwise it won't
work when providing multiple args.
Bug:
32737832
Test: Specify "--java_path=" and "--java_args" when invoking
sign_target_files_apks.py with "-v". Check the commands being
called.
Change-Id: Id7ef98e778646d532027434de7fba9b7a104dbd0
Tao Bao [Sat, 5 Nov 2016 00:09:35 +0000 (00:09 +0000)]
Merge "releasetools: compare size between compressed and patch while build otapackage"
Tao Bao [Fri, 4 Nov 2016 21:26:12 +0000 (21:26 +0000)]
Merge "releasetools: Make BBOTA incremental generation repeatable."
Colin Cross [Fri, 4 Nov 2016 18:09:36 +0000 (18:09 +0000)]
Merge "findleaves.py: prevent recursion into symlink loops"
Colin Cross [Thu, 3 Nov 2016 20:51:10 +0000 (13:51 -0700)]
findleaves.py: prevent recursion into symlink loops
Keep a set of all visited inodes, and prevent recursing into a symlink
to an already visited inode.
Test: m -j
Test: compare `build/tools/findleaves.py --prune=.repo --prune=.git --mindepth=2 --dir=. Android.mk` before and after
Change-Id: Ied14c40d3066ef9f8e8a2b1535f56f7bbbbd0ab6
Treehugger Robot [Thu, 3 Nov 2016 07:12:53 +0000 (07:12 +0000)]
Merge "Export variable for device sanitize arch to Soong"
Dan Willemsen [Thu, 3 Nov 2016 02:39:18 +0000 (02:39 +0000)]
Merge "Update combined build.ninja to depend on Soong's build.ninja"
Dan Willemsen [Wed, 2 Nov 2016 23:24:52 +0000 (16:24 -0700)]
Update combined build.ninja to depend on Soong's build.ninja
For Soong's build.ninja regeneration to work
Bug:
32574042
Test: m -j, add globbed file, m -j
Change-Id: Ie267ea33e8de88275e99330b2d0f147d1e58fa7b
Colin Cross [Wed, 2 Nov 2016 22:05:21 +0000 (15:05 -0700)]
Export variable for device sanitize arch to Soong
Also renames the variable from SANITIZE_ARCH to SANITIZE_TARGET_ARCH,
and makes it only apply to the device.
Bug:
29498013
Test: No change to build.ninja files with m -j SANITIZE_TARGET=address
Change-Id: Ib5f6ab448f5d96d2426c983308136670f9a55b7b
Dan Willemsen [Tue, 1 Nov 2016 17:07:53 +0000 (17:07 +0000)]
Merge "Remove configuration exported from Soong"
Treehugger Robot [Tue, 1 Nov 2016 01:18:59 +0000 (01:18 +0000)]
Merge "Pass global tidy configuration to Soong"
Dan Willemsen [Mon, 31 Oct 2016 23:39:36 +0000 (23:39 +0000)]
Merge "Improve dotdot workaround when src begins with '/'"
Dan Willemsen [Mon, 26 Sep 2016 23:38:55 +0000 (16:38 -0700)]
Remove configuration exported from Soong
Bug:
32244182
Test: build-aosp_angler.ninja is identical before/after (with same env)
Change-Id: Iec2784d1ec5301afe4e2de491dee806551ae3764
Dan Willemsen [Mon, 31 Oct 2016 22:07:37 +0000 (15:07 -0700)]
Pass global tidy configuration to Soong
Bug:
32244182
Test: WITH_TIDY=true mmma -j build/kati
Test: WITH_TIDY=true WITH_TIDY_CHECKS=-*,performance* mmma -j build/kati
Change-Id: Idca86bd114f353449bf80f73d255d7095a99682a
Colin Cross [Sun, 30 Oct 2016 22:05:16 +0000 (22:05 +0000)]
Merge "Revert "Revert "Check prebuilt sources during checkbuild"""
Dan Willemsen [Fri, 28 Oct 2016 23:30:48 +0000 (16:30 -0700)]
Improve dotdot workaround when src begins with '/'
There are some source files in our tree that use some text processing to
find source files, and end up with source file names that look like:
/../../dir/file.c
This isn't fixed by our dotdot workarounds because the filename doesn't
start with '../', so strip the initial '/' from any source files, since
they are all relative to $(LOCAL_PATH) anyways.
Bug:
32514380
Test: Build internal source with this problem
Test: Compare build-aosp_angler.ninja before/after
Change-Id: If869419c3d3ba35d55f6e19d9332515695e47d24
Chih-hung Hsieh [Fri, 28 Oct 2016 20:34:48 +0000 (20:34 +0000)]
Merge "Do not use multiprocessing.Pool when --processes=1."
Treehugger Robot [Fri, 28 Oct 2016 20:04:49 +0000 (20:04 +0000)]
Merge "Move perfprofd installation to PRODUCT_PACKAGES_DEBUG"
Chih-Hung Hsieh [Fri, 28 Oct 2016 17:53:34 +0000 (10:53 -0700)]
Do not use multiprocessing.Pool when --processes=1.
Purpose of this change is not to save some execution time,
but to avoid forking another process. In other applications
that use a wrapper to call this python script, it is difficult
to get overwritten file I/O functions work in a subprocess.
So the wrapper will call warn.py with --processes=1.
Test: run "warn.py --processes=1 build.log"
Change-Id: I5998d5c70d81a456c86eb4002f444a4a60135477
Colin Cross [Thu, 27 Oct 2016 22:35:36 +0000 (15:35 -0700)]
Move perfprofd installation to PRODUCT_PACKAGES_DEBUG
LOCAL_MODULE_TAGS is deprecated, use PRODUCT_PACKAGES_DEBUG instead.
Test: none
Change-Id: I670147f4fe38b02ccafe01b96d8078502404113c
Colin Cross [Thu, 27 Oct 2016 22:10:55 +0000 (22:10 +0000)]
Revert "Revert "Check prebuilt sources during checkbuild""
This reverts commit
409ea88c4797a56b918ad02ebef0d2b1e7c57748.
Bug:
32332829
Change-Id: Ifc8a511762cb44b455cc821f5ac712c294c321c6
Colin Cross [Wed, 26 Oct 2016 23:26:42 +0000 (23:26 +0000)]
Merge "Revert "Check prebuilt sources during checkbuild""
Colin Cross [Wed, 26 Oct 2016 23:25:57 +0000 (23:25 +0000)]
Revert "Check prebuilt sources during checkbuild"
This reverts commit
ec8fae6f2e11a772fa97fe6baf895222f7ffdf5d.
Revert this until a few oddball branches can be fixed.
Bug:
32332829
Change-Id: Ic95fa50e36cb32a4d29bf765b1f3d8384140fb0b
Colin Cross [Wed, 26 Oct 2016 19:35:31 +0000 (19:35 +0000)]
Merge "Check prebuilt sources during checkbuild"
Pirama Arumuga Nainar [Wed, 26 Oct 2016 17:35:50 +0000 (17:35 +0000)]
Merge "RenderScript-specific build updates for LLVM rebase"
Tao Bao [Mon, 24 Oct 2016 23:49:08 +0000 (16:49 -0700)]
releasetools: Make BBOTA incremental generation repeatable.
set() doesn't keep elements according to the order of insertion. So
Transfers managed with set() in intermediate steps may not appear in the
same order across runs. This leads to slightly different output packages
when generating the same incremental OTA.
This CL fixes the issue by replacing set() with OrderedDict() in
blockimgdiff.GenerateDigraph() and blockimgdiff.FindVertexSequence().
It also adds a testcase that ensures blockimgdiff.GenerateDigraph()
preserves the insertion order for Transfer.goes_after set.
Bug:
32220816
Test: ota_from_target_files.py gives identical package when running
multiple times.
Change-Id: I56d551e5ca926993ab46896e33c80e0ce42e506a
Pirama Arumuga Nainar [Tue, 26 Jul 2016 18:37:14 +0000 (11:37 -0700)]
RenderScript-specific build updates for LLVM rebase
Bug: http://b/
31320715
Use LLVM's RenderScript triples: upstream LLVM now has 32-bit and
64-bit RenderScript triples. Update RS_TRIPLE build variables to use
the new triples.
Switch prebuilt clang used for building RenderScript runtime library to
the latest prebuilts.
Test: Run RenderScript tests (slang, bcc host tests, RsTest, CTS)
Change-Id: I308f6a2183350cfc380228a1eed07ec118d93a46
Tao Bao [Mon, 24 Oct 2016 18:50:14 +0000 (18:50 +0000)]
Merge "releasetools: Support verity signer args."
Treehugger Robot [Sat, 22 Oct 2016 03:02:52 +0000 (03:02 +0000)]
Merge "Cleanup NATIVE_COVERAGE, PRIVATE_ARFLAGS"
Colin Cross [Fri, 21 Oct 2016 17:52:06 +0000 (10:52 -0700)]
Check prebuilt sources during checkbuild
Add prebuilt files as dependencies during checkbuild. This will flag
prebuilt modules that have files that don't exist as errors, and also
fix building soong modules with make native, etc.
Bug:
32332829
Test: m -j checkbuild
Test: m -j host
Change-Id: Ia4e22cb640978c181de039202baf02f4fb5a94d5
Dan Willemsen [Fri, 21 Oct 2016 22:04:12 +0000 (15:04 -0700)]
Cleanup NATIVE_COVERAGE, PRIVATE_ARFLAGS
Disable the NATIVE_COVERAGE code when not in use. Provide the proper
PRIVATE_ variables so that the $DISPLAY environment variable isn't
encoded into the ninja file.
Remove PRIVATE_ARFLAGS, which is never set.
Test: compare build-aosp_flounder.ninja
Test: NATIVE_COVERAGE=true build-aosp_flounder.ninja, inspect
Change-Id: I2a52de440fd991cdc5761ff8bd58a474892d2dfc
Treehugger Robot [Fri, 21 Oct 2016 23:00:35 +0000 (23:00 +0000)]
Merge "Don't pass -Wl,--no-undefined to host targets"
Chih-hung Hsieh [Fri, 21 Oct 2016 05:05:29 +0000 (05:05 +0000)]
Merge "Remove valgrind from the exception list."
Dan Willemsen [Fri, 21 Oct 2016 01:08:50 +0000 (01:08 +0000)]
Merge "Remove variables exported by Soong"
Treehugger Robot [Thu, 20 Oct 2016 23:37:40 +0000 (23:37 +0000)]
Merge "Support Android.bp in mgrep"
Colin Cross [Thu, 20 Oct 2016 19:38:21 +0000 (12:38 -0700)]
Don't pass -Wl,--no-undefined to host targets
Host builds were compiling without -Wl,--no-undefined because of an ASAN
issue. Pass -Wl,--no-undefined for host builds unless sanitzers are
enabled. Also fix LOCAL_ALLOW_UNDEFINED_SYMBOLS on darwin, where
disallowing undefined symbols is the default.
Test: m -j host
Test: m -j SANITIZE_HOST=address host
Bug:
32305815
Change-Id: I0344c321610c55eb8b2092b01e50e4a93a0e85df
Colin Cross [Thu, 20 Oct 2016 21:40:55 +0000 (21:40 +0000)]
Merge "Use default -std values exported from soong"
Wei Wang [Thu, 20 Oct 2016 21:26:45 +0000 (14:26 -0700)]
Support Android.bp in mgrep
This patch enabled Android.bp in mgrep result
Bug:
32313127
Test: mgrep
Change-Id: Ie3171a10ab54322bfc3844d1f629c783286ec212
Colin Cross [Mon, 17 Oct 2016 22:34:29 +0000 (15:34 -0700)]
Use default -std values exported from soong
Test: builds
Change-Id: Ic7b7d226131a2a0ea1f099f8a0fc895448384081
Treehugger Robot [Thu, 20 Oct 2016 17:37:43 +0000 (17:37 +0000)]
Merge "goldfish_setup: grant ifconfig priv_sock_ioctls"
Richard Haines [Thu, 20 Oct 2016 14:47:44 +0000 (15:47 +0100)]
goldfish_setup: grant ifconfig priv_sock_ioctls
The goldfish_setup shell script needs the ability to set the interface
address via ifconfig. This requires SIOCSIFADDR plus other ioctl
permissions, therefore allow the set of priv_sock_ioctls permissions.
Addresses the following denial that stops internet access via browser:
avc: denied { ioctl } for pid=712 comm="ifconfig" path="socket:[1825]"
dev="sockfs" ino=1825 ioctlcmd=8916 scontext=u:r:goldfish_setup:s0
tcontext=u:r:goldfish_setup:s0 tclass=udp_socket permissive=0
Test: With update can access internet via browser.
Change-Id: I77a52c0b72bb0ebe9451f45c346a399c1f61672d
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>