OSDN Git Service
Mark Brown [Mon, 12 Mar 2018 16:14:07 +0000 (09:14 -0700)]
Merge remote-tracking branches 'asoc/fix/amd', 'asoc/fix/hdmi-codec', 'asoc/fix/rt5651', 'asoc/fix/samsung', 'asoc/fix/sgtl5000', 'asoc/fix/sunxi' and 'asoc/fix/wm-adsp' into asoc-linus
Linus Torvalds [Mon, 12 Mar 2018 00:25:09 +0000 (17:25 -0700)]
Linux 4.16-rc5
Linus Torvalds [Sun, 11 Mar 2018 21:59:23 +0000 (14:59 -0700)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86/pti updates from Thomas Gleixner:
"Yet another pile of melted spectrum related updates:
- Drop native vsyscall support finally as it causes more trouble than
benefit.
- Make microcode loading more robust. There were a few issues
especially related to late loading which are now surfacing because
late loading of the IB* microcodes addressing spectre issues has
become more widely used.
- Simplify and robustify the syscall handling in the entry code
- Prevent kprobes on the entry trampoline code which lead to kernel
crashes when the probe hits before CR3 is updated
- Don't check microcode versions when running on hypervisors as they
are considered as lying anyway.
- Fix the 32bit objtool build and a coment typo"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix kernel crash when probing .entry_trampoline code
x86/pti: Fix a comment typo
x86/microcode: Synchronize late microcode loading
x86/microcode: Request microcode on the BSP
x86/microcode/intel: Look into the patch cache first
x86/microcode: Do not upload microcode if CPUs are offline
x86/microcode/intel: Writeback and invalidate caches before updating microcode
x86/microcode/intel: Check microcode revision before updating sibling threads
x86/microcode: Get rid of struct apply_microcode_ctx
x86/spectre_v2: Don't check microcode versions when running under hypervisors
x86/vsyscall/64: Drop "native" vsyscalls
x86/entry/64/compat: Save one instruction in entry_INT80_compat()
x86/entry: Do not special-case clone(2) in compat entry
x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls
x86/syscalls: Use proper syscall definition for sys_ioperm()
x86/entry: Remove stale syscall prototype
x86/syscalls/32: Simplify $entry == $compat entries
objtool: Fix 32-bit build
Linus Torvalds [Sun, 11 Mar 2018 21:55:15 +0000 (14:55 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Just a single fix which adds a missing Kconfig dependency to avoid
unmet dependency warnings"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency
Linus Torvalds [Sun, 11 Mar 2018 21:52:41 +0000 (14:52 -0700)]
Merge branch 'ras-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RAS fixes from Thomas Gleixner:
"Two small fixes for RAS/MCE:
- Serialize sysfs changes to avoid concurrent modificaiton of
underlying data
- Add microcode revision to Machine Check records. This should have
been there forever, but now with the broken microcode versions in
the wild it has become important"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE: Serialize sysfs changes
x86/MCE: Save microcode revision in machine check records
Linus Torvalds [Sun, 11 Mar 2018 21:49:49 +0000 (14:49 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"Another set of perf updates:
- Fix a Skylake Uncore event format declaration
- Prevent perf pipe mode from crahsing which was caused by a missing
buffer allocation
- Make the perf top popup message which tells the user that it uses
fallback mode on older kernels a debug message.
- Make perf context rescheduling work correcctly
- Robustify the jump error drawing in perf browser mode so it does
not try to create references to NULL initialized offset entries
- Make trigger_on() robust so it does not enable the trigger before
everything is set up correctly to handle it
- Make perf auxtrace respect the --no-itrace option so it does not
try to queue AUX data for decoding.
- Prevent having different number of field separators in CVS output
lines when a counter is not supported.
- Make the perf kallsyms man page usage behave like it does for all
other perf commands.
- Synchronize the kernel headers"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix ctx_event_type in ctx_resched()
perf tools: Fix trigger class trigger_on()
perf auxtrace: Prevent decoding when --no-itrace
perf stat: Fix CVS output format for non-supported counters
tools headers: Sync x86's cpufeatures.h
tools headers: Sync copy of kvm UAPI headers
perf record: Fix crash in pipe mode
perf annotate browser: Be more robust when drawing jump arrows
perf top: Fix annoying fallback message on older kernels
perf kallsyms: Fix the usage on the man page
perf/x86/intel/uncore: Fix Skylake UPI event format
Linus Torvalds [Sun, 11 Mar 2018 21:46:54 +0000 (14:46 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"rt_mutex_futex_unlock() grew a new irq-off call site, but the function
assumes that its always called from irq enabled context.
Use (un)lock_irqsafe() to handle the new call site correctly"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites
Linus Torvalds [Sun, 11 Mar 2018 20:07:14 +0000 (13:07 -0700)]
Merge tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Two small fixes are for this cycle:
- fix max_chunk_size for rcar-dmac for R-Car Gen3
- fix clock resource of mv_xor_v2"
* tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3
Linus Torvalds [Sun, 11 Mar 2018 20:05:15 +0000 (13:05 -0700)]
Merge tag 'gpio-v4.16-3' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"This is a single GPIO fix for the v4.16 series affecting the Renesas
driver, and fixes wakeup from external stuff"
* tag 'gpio-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: rcar: Use wakeup_path i.s.o. explicit clock handling
Gregory CLEMENT [Wed, 7 Mar 2018 15:40:10 +0000 (16:40 +0100)]
dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
On the CP110 components which are present on the Armada 7K/8K SoC we need
to explicitly enable the clock for the registers. However it is not
needed for the AP8xx component, that's why this clock is optional.
With this patch both clock have now a name, but in order to be backward
compatible, the name of the first clock is not used. It allows to still
use this clock with a device tree using the old binding.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Linus Torvalds [Sat, 10 Mar 2018 18:21:07 +0000 (10:21 -0800)]
Merge tag 'kbuild-fixes-v4.16-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- make fixdep parse kconfig.h to fix missing rebuild
- replace hyphens with underscores in builtin DTB label names
- fix typos
* tag 'kbuild-fixes-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Handle builtin dtb file names containing hyphens
scripts/bloat-o-meter: fix typos in help
fixdep: do not ignore kconfig.h
fixdep: remove some false CONFIG_ matches
fixdep: remove stale references to uml-config.h
Linus Torvalds [Sat, 10 Mar 2018 18:17:59 +0000 (10:17 -0800)]
Merge tag 'linux-watchdog-4.16-fixes-2' of git://linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- f71808e_wdt: Fix magic close handling
- sbsa: 32-bit read fix for WCV
- hpwdt: Remove legacy NMI sourcing
* tag 'linux-watchdog-4.16-fixes-2' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: hpwdt: Remove legacy NMI sourcing.
watchdog: sbsa: use 32-bit read for WCV
watchdog: f71808e_wdt: Fix magic close handling
Linus Torvalds [Sat, 10 Mar 2018 16:48:01 +0000 (08:48 -0800)]
Merge tag 'for-linus-
20180309' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- a xen-blkfront fix from Bhavesh with a multiqueue fix when
detaching/re-attaching
- a few important NVMe fixes, including a revert for a sysfs fix that
caused some user space confusion
- two bcache fixes by way of Michael Lyle
- a loop regression fix, fixing an issue with lost writes on DAX.
* tag 'for-linus-
20180309' of git://git.kernel.dk/linux-block:
loop: Fix lost writes caused by missing flag
nvme_fc: rework sqsize handling
nvme-fabrics: Ignore nr_io_queues option for discovery controllers
xen-blkfront: move negotiate_mq to cover all cases of new VBDs
Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers"
bcache: don't attach backing with duplicate UUID
bcache: fix crashes in duplicate cache device register
nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectors
nvme-pci: Fix EEH failure on ppc
Linus Torvalds [Sat, 10 Mar 2018 16:45:44 +0000 (08:45 -0800)]
Merge tag 'for-4.16/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix an uninitialized variable false warning in dm bufio
- Fix DM's passthrough ioctl support to be race free against an
underlying device being removed.
- Fix corner-case of DM raid resync reporting if/when the raid becomes
degraded during resync; otherwise automated raid repair will fail.
- A few DM multipath fixes to make non-SCSI optimizations, that were
introduced during the 4.16 merge, useful for all non-SCSI devices,
rather than narrowly define this non-SCSI mode in terms of "nvme".
This allows the removal of "queue_mode nvme" that really didn't need
to be introduced. Instead DM core will internalize whether
nvme-specific IO submission optimizations are doable and DM multipath
will only do SCSI-specific device handler operations if SCSI is in
use.
* tag 'for-4.16/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm table: allow upgrade from bio-based to specialized bio-based variant
dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks
dm table: fix "nvme" test
dm raid: fix incorrect sync_ratio when degraded
dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl
dm bufio: avoid false-positive Wmaybe-uninitialized warning
Linus Torvalds [Sat, 10 Mar 2018 16:38:01 +0000 (08:38 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
- Various driver bug fixes in mlx5, mlx4, bnxt_re and qedr, ranging
from bugs under load to bad error case handling
- There in one largish patch fixing the locking in bnxt_re to avoid a
machine hard lock situation
- A few core bugs on error paths
- A patch to reduce stack usage in the new CQ API
- One mlx5 regression introduced in this merge window
- There were new syzkaller scripts written for the RDMA subsystem and
we are fixing issues found by the bot
- One of the commits (
aa0de36a40f4 “RDMA/mlx5: Fix integer overflow
while resizing CQ”) is missing part of the commit log message and one
of the SOB lines. The original patch was from Leon Romanovsky, and a
cut-n-paste separator in the commit message confused patchworks which
then put the end of message separator in the wrong place in the
downloaded patch, and I didn’t notice in time. The patch made it into
the official branch, and the only way to fix it in-place was to
rebase. Given the pain that a rebase causes, and the fact that the
patch has relevant tags for stable and syzkaller, a revert of the
munged patch and a reapplication of the original patch with the log
message intact was done.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits)
RDMA/mlx5: Fix integer overflow while resizing CQ
Revert "RDMA/mlx5: Fix integer overflow while resizing CQ"
RDMA/ucma: Check that user doesn't overflow QP state
RDMA/mlx5: Fix integer overflow while resizing CQ
RDMA/ucma: Limit possible option size
IB/core: Fix possible crash to access NULL netdev
RDMA/bnxt_re: Avoid Hard lockup during error CQE processing
RDMA/core: Reduce poll batch for direct cq polling
IB/mlx5: Fix an error code in __mlx5_ib_modify_qp()
IB/mlx5: When not in dual port RoCE mode, use provided port as native
IB/mlx4: Include GID type when deleting GIDs from HW table under RoCE
IB/mlx4: Fix corruption of RoCEv2 IPv4 GIDs
RDMA/qedr: Fix iWARP write and send with immediate
RDMA/qedr: Fix kernel panic when running fio over NFSoRDMA
RDMA/qedr: Fix iWARP connect with port mapper
RDMA/qedr: Fix ipv6 destination address resolution
IB/core : Add null pointer check in addr_resolve
RDMA/bnxt_re: Fix the ib_reg failure cleanup
RDMA/bnxt_re: Fix incorrect DB offset calculation
RDMA/bnxt_re: Unconditionly fence non wire memory operations
...
Linus Torvalds [Sat, 10 Mar 2018 16:35:29 +0000 (08:35 -0800)]
Merge tag 'platform-drivers-x86-v4.16-6' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Correct a module loading race condition between the DELL_SMBIOS
backend modules and the first user by converting them to bool features
of the DELL_SMBIOS driver. Fixup the resulting Kconfig dependency
issue with DCDBAS"
* tag 'platform-drivers-x86-v4.16-6' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: dell-smbios: Resolve dependency error on DCDBAS
platform/x86: Allow for SMBIOS backend defaults
platform/x86: dell-smbios: Link all dell-smbios-* modules together
platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-base
platform/x86: dell-smbios: Correct some style warnings
Linus Torvalds [Sat, 10 Mar 2018 00:59:19 +0000 (16:59 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"PPC:
- Fix guest time accounting in the host
- Fix large-page backing for radix guests on POWER9
- Fix HPT guests on POWER9 backed by 2M or 1G pages
- Compile fixes for some configs and gcc versions
s390:
- Fix random memory corruption when running as guest2 (e.g. KVM in
LPAR) and starting guest3 (e.g. nested KVM) with many CPUs
- Export forgotten io interrupt delivery statistics counter"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: fix memory overwrites when not using SCA entries
KVM: PPC: Book3S HV: Fix guest time accounting with VIRT_CPU_ACCOUNTING_GEN
KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing
KVM: PPC: Book3S HV: Fix handling of large pages in radix page fault handler
KVM: s390: provide io interrupt kvm_stat
KVM: PPC: Book3S: Fix compile error that occurs with some gcc versions
KVM: PPC: Fix compile error that occurs when CONFIG_ALTIVEC=n
Linus Torvalds [Sat, 10 Mar 2018 00:54:18 +0000 (16:54 -0800)]
Merge tag 'for-linus-4.16a-rc5-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Just one fix for the correct error handling after a failed
device_register()"
* tag 'for-linus-4.16a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: xenbus: use put_device() instead of kfree()
Linus Torvalds [Sat, 10 Mar 2018 00:49:30 +0000 (16:49 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- The SMCCC firmware interface for the spectre variant 2 mitigation has
been updated to allow the discovery of whether the CPU needs the
workaround. This pull request relaxes the kernel check on the return
value from firmware.
- Fix the commit allowing changing from global to non-global page table
entries which inadvertently disallowed other safe attribute changes.
- Fix sleeping in atomic during the arm_perf_teardown_cpu() code.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery
arm_pmu: Use disable_irq_nosync when disabling SPI in CPU teardown hook
arm64: mm: fix thinko in non-global page table attribute check
Linus Torvalds [Sat, 10 Mar 2018 00:45:57 +0000 (16:45 -0800)]
Merge tag 'docs-4.16-fix' of git://git.lwn.net/linux
Pull Documentation build fix from Jonathan Corbet:
"The Sphinx 1.7 release broke the build process for reasons that are
mostly our fault.
This is a single fix cherry-picked from docs-next that restores docs
buildability for all supported Sphinx versions"
* tag 'docs-4.16-fix' of git://git.lwn.net/linux:
Documentation/sphinx: Fix Directive import error
Linus Torvalds [Sat, 10 Mar 2018 00:42:25 +0000 (16:42 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib/test_kmod.c: fix limit check on number of test devices created
selftests/vm/run_vmtests: adjust hugetlb size according to nr_cpus
mm/page_alloc: fix memmap_init_zone pageblock alignment
mm/memblock.c: hardcode the end_pfn being -1
mm/gup.c: teach get_user_pages_unlocked to handle FOLL_NOWAIT
lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()
bug: use %pB in BUG and stack protector failure
hugetlb: fix surplus pages accounting
Luis R. Rodriguez [Fri, 9 Mar 2018 23:51:20 +0000 (15:51 -0800)]
lib/test_kmod.c: fix limit check on number of test devices created
As reported by Dan the parentheses is in the wrong place, and since
unlikely() call returns either 0 or 1 it's never less than zero. The
second issue is that signed integer overflows like "INT_MAX + 1" are
undefined behavior.
Since num_test_devs represents the number of devices, we want to stop
prior to hitting the max, and not rely on the wrap arround at all. So
just cap at num_test_devs + 1, prior to assigning a new device.
Link: http://lkml.kernel.org/r/20180224030046.24238-1-mcgrof@kernel.org
Fixes:
d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zhijian [Fri, 9 Mar 2018 23:51:16 +0000 (15:51 -0800)]
selftests/vm/run_vmtests: adjust hugetlb size according to nr_cpus
Fix userfaultfd_hugetlb on hosts which have more than 64 cpus.
---------------------------
running userfaultfd_hugetlb
---------------------------
invalid MiB
Usage: <MiB> <bounces>
[FAIL]
Via userfaultfd.c we can know, hugetlb_size needs to meet hugetlb_size
>= nr_cpus * hugepage_size. hugepage_size is often 2M, so when host
cpus > 64, it requires more than 128M.
[zhijianx.li@intel.com: update changelog/comments and variable name]
Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
Link: http://lkml.kernel.org/r/20180303125027.81638-1-zhijianx.li@intel.com
Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Vacek [Fri, 9 Mar 2018 23:51:13 +0000 (15:51 -0800)]
mm/page_alloc: fix memmap_init_zone pageblock alignment
Commit
b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns
where possible") introduced a bug where move_freepages() triggers a
VM_BUG_ON() on uninitialized page structure due to pageblock alignment.
To fix this, simply align the skipped pfns in memmap_init_zone() the
same way as in move_freepages_block().
Seen in one of the RHEL reports:
crash> log | grep -e BUG -e RIP -e Call.Trace -e move_freepages_block -e rmqueue -e freelist -A1
kernel BUG at mm/page_alloc.c:1389!
invalid opcode: 0000 [#1] SMP
--
RIP: 0010:[<
ffffffff8118833e>] [<
ffffffff8118833e>] move_freepages+0x15e/0x160
RSP: 0018:
ffff88054d727688 EFLAGS:
00010087
--
Call Trace:
[<
ffffffff811883b3>] move_freepages_block+0x73/0x80
[<
ffffffff81189e63>] __rmqueue+0x263/0x460
[<
ffffffff8118c781>] get_page_from_freelist+0x7e1/0x9e0
[<
ffffffff8118caf6>] __alloc_pages_nodemask+0x176/0x420
--
RIP [<
ffffffff8118833e>] move_freepages+0x15e/0x160
RSP <
ffff88054d727688>
crash> page_init_bug -v | grep RAM
<struct resource 0xffff88067fffd2f8> 1000 - 9bfff System RAM (620.00 KiB)
<struct resource 0xffff88067fffd3a0> 100000 -
430bffff System RAM ( 1.05 GiB = 1071.75 MiB =
1097472.00 KiB)
<struct resource 0xffff88067fffd410>
4b0c8000 -
4bf9cfff System RAM ( 14.83 MiB = 15188.00 KiB)
<struct resource 0xffff88067fffd480>
4bfac000 -
646b1fff System RAM (391.02 MiB = 400408.00 KiB)
<struct resource 0xffff88067fffd560>
7b788000 -
7b7fffff System RAM (480.00 KiB)
<struct resource 0xffff88067fffd640>
100000000 -
67fffffff System RAM ( 22.00 GiB)
crash> page_init_bug | head -6
<struct resource 0xffff88067fffd560>
7b788000 -
7b7fffff System RAM (480.00 KiB)
<struct page 0xffffea0001ede200>
1fffff00000000 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096
1048575
<struct page 0xffffea0001ede200> 505736 505344 <struct page 0xffffea0001ed8000> 505855 <struct page 0xffffea0001edffc0>
<struct page 0xffffea0001ed8000> 0 0 <struct pglist_data 0xffff88047ffd9000> 0 <struct zone 0xffff88047ffd9000> DMA 1 4095
<struct page 0xffffea0001edffc0>
1fffff00000400 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096
1048575
BUG, zones differ!
Note that this range follows two not populated sections
68000000-
77ffffff in this zone.
7b788000-
7b7fffff is the first one
after a gap. This makes memmap_init_zone() skip all the pfns up to the
beginning of this range. But this range is not pageblock (2M) aligned.
In fact no range has to be.
crash> kmem -p
77fff000 78000000 7b5ff000 7b600000 7b787000 7b788000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
ffffea0001e00000 78000000 0 0 0 0
ffffea0001ed7fc0 7b5ff000 0 0 0 0
ffffea0001ed8000 7b600000 0 0 0 0 <<<<
ffffea0001ede1c0 7b787000 0 0 0 0
ffffea0001ede200 7b788000 0 0 1
1fffff00000000
Top part of page flags should contain nodeid and zonenr, which is not
the case for page
ffffea0001ed8000 here (<<<<).
crash> log | grep -o
fffea0001ed[^\ ]* | sort -u
fffea0001ed8000
fffea0001eded20
fffea0001edffc0
crash> bt -r | grep -o
fffea0001ed[^\ ]* | sort -u
fffea0001ed8000
fffea0001eded00
fffea0001eded20
fffea0001edffc0
Initialization of the whole beginning of the section is skipped up to
the start of the range due to the commit
b92df1de5d28. Now any code
calling move_freepages_block() (like reusing the page from a freelist as
in this example) with a page from the beginning of the range will get
the page rounded down to start_page
ffffea0001ed8000 and passed to
move_freepages() which crashes on assertion getting wrong zonenr.
> VM_BUG_ON(page_zone(start_page) != page_zone(end_page));
Note, page_zone() derives the zone from page flags here.
From similar machine before commit
b92df1de5d28:
crash> kmem -p
77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
fffff73941e00000 78000000 0 0 1
1fffff00000000
fffff73941ed7fc0 7b5ff000 0 0 1
1fffff00000000
fffff73941ed8000 7b600000 0 0 1
1fffff00000000
fffff73941edff80 7b7fe000 0 0 1
1fffff00000000
fffff73941edffc0 7b7ff000 ffff8e67e04d3ae0 ad84 1
1fffff00020068 uptodate,lru,active,mappedtodisk
All the pages since the beginning of the section are initialized.
move_freepages()' not gonna blow up.
The same machine with this fix applied:
crash> kmem -p
77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
ffffea0001e00000 78000000 0 0 0 0
ffffea0001e00000 7b5ff000 0 0 0 0
ffffea0001ed8000 7b600000 0 0 1
1fffff00000000
ffffea0001edff80 7b7fe000 0 0 1
1fffff00000000
ffffea0001edffc0 7b7ff000 ffff88017fb13720 8 2
1fffff00020068 uptodate,lru,active,mappedtodisk
At least the bare minimum of pages is initialized preventing the crash
as well.
Customers started to report this as soon as 7.4 (where
b92df1de5d28 was
merged in RHEL) was released. I remember reports from
September/October-ish times. It's not easily reproduced and happens on
a handful of machines only. I guess that's why. But that does not make
it less serious, I think.
Though there actually is a report here:
https://bugzilla.kernel.org/show_bug.cgi?id=196443
And there are reports for Fedora from July:
https://bugzilla.redhat.com/show_bug.cgi?id=
1473242
and CentOS:
https://bugs.centos.org/view.php?id=13964
and we internally track several dozens reports for RHEL bug
https://bugzilla.redhat.com/show_bug.cgi?id=
1525121
Link: http://lkml.kernel.org/r/0485727b2e82da7efbce5f6ba42524b429d0391a.1520011945.git.neelx@redhat.com
Fixes:
b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible")
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Vacek [Fri, 9 Mar 2018 23:51:09 +0000 (15:51 -0800)]
mm/memblock.c: hardcode the end_pfn being -1
This is just a cleanup. It aids handling the special end case in the
next commit.
[akpm@linux-foundation.org: make it work against current -linus, not against -mm]
[akpm@linux-foundation.org: make it work against current -linus, not against -mm some more]
Link: http://lkml.kernel.org/r/1ca478d4269125a99bcfb1ca04d7b88ac1aee924.1520011944.git.neelx@redhat.com
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Arcangeli [Fri, 9 Mar 2018 23:51:06 +0000 (15:51 -0800)]
mm/gup.c: teach get_user_pages_unlocked to handle FOLL_NOWAIT
KVM is hanging during postcopy live migration with userfaultfd because
get_user_pages_unlocked is not capable to handle FOLL_NOWAIT.
Earlier FOLL_NOWAIT was only ever passed to get_user_pages.
Specifically faultin_page (the callee of get_user_pages_unlocked caller)
doesn't know that if FAULT_FLAG_RETRY_NOWAIT was set in the page fault
flags, when VM_FAULT_RETRY is returned, the mmap_sem wasn't actually
released (even if nonblocking is not NULL). So it sets *nonblocking to
zero and the caller won't release the mmap_sem thinking it was already
released, but it wasn't because of FOLL_NOWAIT.
Link: http://lkml.kernel.org/r/20180302174343.5421-2-aarcange@redhat.com
Fixes:
ce53053ce378c ("kvm: switch get_user_page_nowait() to get_user_pages_unlocked()")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Fri, 9 Mar 2018 23:51:02 +0000 (15:51 -0800)]
lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()
Commit
b8347c219649 ("x86/debug: Handle warnings before the notifier
chain, to fix KGDB crash") changed the ordering of fixups, and did not
take into account the case of x86 processing non-WARN() and non-BUG()
exceptions. This would lead to output of a false BUG line with no other
information.
In the case of a refcount exception, it would be immediately followed by
the refcount WARN(), producing very strange double-"cut here":
lkdtm: attempting bad refcount_inc() overflow
------------[ cut here ]------------
Kernel BUG at
0000000065f29de5 [verbose debug info unavailable]
------------[ cut here ]------------
refcount_t overflow at lkdtm_REFCOUNT_INC_OVERFLOW+0x6b/0x90 in cat[3065], uid/euid: 0/0
WARNING: CPU: 0 PID: 3065 at kernel/panic.c:657 refcount_error_report+0x9a/0xa4
...
In the prior ordering, exceptions were searched first:
do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str,
...
if (fixup_exception(regs, trapnr))
return 0;
- if (fixup_bug(regs, trapnr))
- return 0;
-
As a result, fixup_bugs()'s is_valid_bugaddr() didn't take into account
needing to search the exception list first, since that had already
happened.
So, instead of searching the exception list twice (once in
is_valid_bugaddr() and then again in fixup_exception()), just add a
simple sanity check to report_bug() that will immediately bail out if a
BUG() (or WARN()) entry is not found.
Link: http://lkml.kernel.org/r/20180301225934.GA34350@beast
Fixes:
b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash")
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Fri, 9 Mar 2018 23:50:59 +0000 (15:50 -0800)]
bug: use %pB in BUG and stack protector failure
The BUG and stack protector reports were still using a raw %p. This
changes it to %pB for more meaningful output.
Link: http://lkml.kernel.org/r/20180301225704.GA34198@beast
Fixes:
ad67b74d2469 ("printk: hash addresses printed with %p")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Richard Weinberger <richard.weinberger@gmail.com>,
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 9 Mar 2018 23:50:55 +0000 (15:50 -0800)]
hugetlb: fix surplus pages accounting
Dan Rue has noticed that libhugetlbfs test suite fails counter test:
# mount_point="/mnt/hugetlb/"
# echo 200 > /proc/sys/vm/nr_hugepages
# mkdir -p "${mount_point}"
# mount -t hugetlbfs hugetlbfs "${mount_point}"
# export LD_LIBRARY_PATH=/root/libhugetlbfs/libhugetlbfs-2.20/obj64
# /root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters
Starting testcase "/root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters", pid 3319
Base pool size: 0
Clean...
FAIL Line 326: Bad HugePages_Total: expected 0, actual 1
The bug was bisected to
0c397daea1d4 ("mm, hugetlb: further simplify
hugetlb allocation API").
The reason is that alloc_surplus_huge_page() misaccounts per node
surplus pages. We should increase surplus_huge_pages_node rather than
nr_huge_pages_node which is already handled by alloc_fresh_huge_page.
Link: http://lkml.kernel.org/r/20180221191439.GM2231@dhcp22.suse.cz
Fixes:
0c397daea1d4 ("mm, hugetlb: further simplify hugetlb allocation API")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Dan Rue <dan.rue@linaro.org>
Tested-by: Dan Rue <dan.rue@linaro.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Leon Romanovsky [Wed, 7 Mar 2018 13:29:09 +0000 (15:29 +0200)]
RDMA/mlx5: Fix integer overflow while resizing CQ
The user can provide very large cqe_size which will cause to integer
overflow as it can be seen in the following UBSAN warning:
=======================================================================
UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/cq.c:1192:53
signed integer overflow:
64870 * 65536 cannot be represented in type 'int'
CPU: 0 PID: 267 Comm: syzkaller605279 Not tainted 4.15.0+ #90 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0xde/0x164
? dma_virt_map_sg+0x22c/0x22c
ubsan_epilogue+0xe/0x81
handle_overflow+0x1f3/0x251
? __ubsan_handle_negate_overflow+0x19b/0x19b
? lock_acquire+0x440/0x440
mlx5_ib_resize_cq+0x17e7/0x1e40
? cyc2ns_read_end+0x10/0x10
? native_read_msr_safe+0x6c/0x9b
? cyc2ns_read_end+0x10/0x10
? mlx5_ib_modify_cq+0x220/0x220
? sched_clock_cpu+0x18/0x200
? lookup_get_idr_uobject+0x200/0x200
? rdma_lookup_get_uobject+0x145/0x2f0
ib_uverbs_resize_cq+0x207/0x3e0
? ib_uverbs_ex_create_cq+0x250/0x250
ib_uverbs_write+0x7f9/0xef0
? cyc2ns_read_end+0x10/0x10
? print_irqtrace_events+0x280/0x280
? ib_uverbs_ex_create_cq+0x250/0x250
? uverbs_devnode+0x110/0x110
? sched_clock_cpu+0x18/0x200
? do_raw_spin_trylock+0x100/0x100
? __lru_cache_add+0x16e/0x290
__vfs_write+0x10d/0x700
? uverbs_devnode+0x110/0x110
? kernel_read+0x170/0x170
? sched_clock_cpu+0x18/0x200
? security_file_permission+0x93/0x260
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
? SyS_read+0x1a0/0x1a0
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL_64_fastpath+0x1e/0x8b
RIP: 0033:0x433549
RSP: 002b:
00007ffe63bd1ea8 EFLAGS:
00000217
=======================================================================
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 3.13
Fixes:
bde51583f49b ("IB/mlx5: Add support for resize CQ")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Fri, 9 Mar 2018 23:07:46 +0000 (18:07 -0500)]
Revert "RDMA/mlx5: Fix integer overflow while resizing CQ"
The original commit of this patch has a munged log message that is
missing several of the tags the original author intended to be on the
patch. This was due to patchworks misinterpreting a cut-n-paste
separator line as an end of message line and munging the mbox that was
used to import the patch:
https://patchwork.kernel.org/patch/
10264089/
The original patch will be reapplied with a fixed commit message so the
proper tags are applied.
This reverts commit
aa0de36a40f446f5a21a7c1e677b98206e242edb.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Linus Torvalds [Fri, 9 Mar 2018 21:31:08 +0000 (13:31 -0800)]
Merge tag 'pci-v4.16-fixes-3' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix sparc build issue when OF_IRQ not enabled (Guenter Roeck)
- fix enumeration of devices below switches on DesignWare-based
controllers (Koen Vandeputte)
* tag 'pci-v4.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: dwc: Fix enumeration end when reaching root subordinate
PCI: Move of_irq_parse_and_map_pci() declaration under OF_IRQ
Linus Torvalds [Fri, 9 Mar 2018 21:25:21 +0000 (13:25 -0800)]
Merge tag 'fbdev-v4.16-rc5' of git://github.com/bzolnier/linux
Pull fbdev fix from Bartlomiej Zolnierkiewicz:
"Just a single fix to close a kernel data leak in FBIOGETCMAP_SPARC
ioctl"
* tag 'fbdev-v4.16-rc5' of git://github.com/bzolnier/linux:
fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper().
Linus Torvalds [Fri, 9 Mar 2018 21:18:02 +0000 (13:18 -0800)]
Merge tag 'drm-fixes-for-v4.16-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"There are a small set of sun4i and i915 fixes, and many more amdgpu
fixes:
sun4i:
- divide by zero fix
- clock and LVDS fixes
i915:
- fix for perf
- race fix
amdgpu:
- a bit more than we are normally comfortable with at this point,
however it does fix a lot of display issues with the new DC code
which result in black screens in various configurations along with
some run of the mill gpu configuration fixes.
I'm happy enough that the fixes are limited to the DC code and
should fix a bunch of issues on the new raven ridge APUs that we
are seeing shipped now"
* tag 'drm-fixes-for-v4.16-rc5' of git://people.freedesktop.org/~airlied/linux: (42 commits)
drm/amd/display: validate plane format on primary plane
drm/amdgpu:Always save uvd vcpu_bo in VM Mode
drm/amdgpu:Correct max uvd handles
drm/amd/display: early return if not in vga mode in disable_vga
drm/amd/display: Fix takover from VGA mode
drm/amd/display: Fix memleaks when atomic check fails.
drm/amd/display: Return success when enabling interrupt
drm/amd/display: Use crtc enable/disable_vblank hooks
drm/amd/display: update infoframe after dig fe is turned on
drm/amd/display: fix boot-up on vega10
drm/amd/display: fix cursor related Pstate hang
drm/amd/display: Set irq state only on existing crtcs
drm/amd/display: Fixed non-native modes not lighting up
drm/amd/display: Call update_stream_signal directly from amdgpu_dm
drm/amd/display: Make create_stream_for_sink more consistent
drm/amd/display: Don't block dual-link DVI modes
drm/amd/display: Don't allow dual-link DVI on all ASICs.
drm/amd/display: Pass signal directly to enable_tmds_output
drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink
drm/amd/display: Move MAX_TMDS_CLOCK define to header
...
Linus Torvalds [Fri, 9 Mar 2018 18:01:59 +0000 (10:01 -0800)]
Merge tag 'sound-4.16-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Two type of fixes:
- The usual stuff, a handful HD-audio quirks for various machines
- Further hardening against ALSA sequencer ioctl/write races that are
triggered by fuzzer"
* tag 'sound-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: add dock and led support for HP ProBook 640 G2
ALSA: hda: add dock and led support for HP EliteBook 820 G3
ALSA: hda/realtek - Make dock sound work on ThinkPad L570
ALSA: seq: Remove superfluous snd_seq_queue_client_leave_cells() call
ALSA: seq: More protection for concurrent write and ioctl races
ALSA: seq: Don't allow resizing pool in use
ALSA: hda/realtek - Fix dock line-out volume on Dell Precision 7520
ALSA: hda/realtek: Limit mic boost on T480
ALSA: hda/realtek - Add headset mode support for Dell laptop
ALSA: hda/realtek - Add support headset mode for DELL WYSE
ALSA: hda - Fix a wrong FIXUP for alc289 on Dell machines
Marc Zyngier [Fri, 9 Mar 2018 15:40:50 +0000 (15:40 +0000)]
arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery
A recent update to the ARM SMCCC ARCH_WORKAROUND_1 specification
allows firmware to return a non zero, positive value to describe
that although the mitigation is implemented at the higher exception
level, the CPU on which the call is made is not affected.
Let's relax the check on the return value from ARCH_WORKAROUND_1
so that we only error out if the returned value is negative.
Fixes:
b092201e0020 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Matthew Wilcox [Fri, 2 Mar 2018 18:40:14 +0000 (10:40 -0800)]
Documentation/sphinx: Fix Directive import error
Sphinx 1.7 removed sphinx.util.compat.Directive so people
who have upgraded cannot build the documentation. Switch to
docutils.parsers.rst.Directive which has been available since
docutils 0.5 released in 2009.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=
1083694
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Linus Torvalds [Fri, 9 Mar 2018 17:46:14 +0000 (09:46 -0800)]
Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"This fixes a corner case for NFS exporting (introduced in this cycle)
as well as fixing miscellaneous bugs"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: update Kconfig texts
ovl: redirect_dir=nofollow should not follow redirect for opaque lower
ovl: fix ptr_ret.cocci warnings
ovl: check ERR_PTR() return value from ovl_lookup_real()
ovl: check lower ancestry on encode of lower dir file handle
ovl: hash non-dir by lower inode for fsnotify
Linus Torvalds [Fri, 9 Mar 2018 17:37:29 +0000 (09:37 -0800)]
Merge tag 'xfs-4.16-fixes-3' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix some iomap locking problems
- Don't allocate cow blocks when we're zeroing file data
* tag 'xfs-4.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't block on the ilock for RWF_NOWAIT
xfs: don't start out with the exclusive ilock for direct I/O
xfs: don't allocate COW blocks for zeroing holes or unwritten extents
Darren Hart (VMware) [Wed, 7 Mar 2018 02:01:04 +0000 (18:01 -0800)]
platform/x86: dell-smbios: Resolve dependency error on DCDBAS
When the DELL_SMBIOS_SMM backend is enabled, the DELL_SMBIOS symbol
depends on DELL_DCDBAS, and we must avoid the situation where
DELL_SMBIOS=y and DCDBAS=m.
Adding the conditional dependency to DELL_SMBIOS such as:
depends !DELL_SMBIOS_SMM || (DCDBAS || DCDBAS=n)
results in the Kconfig tooling complaining about a circular dependency,
although it appears to work in practice.
Avoid the errors by simplifying the dependency and forcing DELL_SMBIOS
to be <= DCDBAS if DCDBAS is enabled (thanks to Greg KH for the
suggestion).
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Darren Hart (VMware) [Sat, 3 Mar 2018 01:40:32 +0000 (17:40 -0800)]
platform/x86: Allow for SMBIOS backend defaults
Avoid accidental configurations by setting default y for DELL_SMBIOS
backends. Avoid this impacting the default build size, by making them
dependent on DELL_SMBIOS, so they only appear when DELL_SMBIOS is
manually selected, or by DELL_LAPTOP or DELL_WMI.
While DELL_SMBIOS does have a prompt, it does not have any dependencies.
Keeping DELL_SMBIOS visible, despite being "select"ed by DELL_LAPTOP and
DELL_WMI, is a deliberate choice to provide context for the WMI and SMM
backends, which would otherwise appear to float without context within
the menu.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Mario Limonciello [Tue, 27 Feb 2018 18:23:04 +0000 (12:23 -0600)]
platform/x86: dell-smbios: Link all dell-smbios-* modules together
Some race conditions were raised due to dell-smbios and its backends
not being ready by the time that a consumer would call one of the
exported methods.
To avoid this problem, guarantee that all initialization has been
done by linking them all together and running init for them all.
As part of this change the Kconfig needs to be adjusted so that
CONFIG_DELL_SMBIOS_SMM and CONFIG_DELL_SMBIOS_WMI are boolean
rather than modules.
CONFIG_DELL_SMBIOS is a visually selectable option again and both
CONFIG_DELL_SMBIOS_WMI and CONFIG_DELL_SMBIOS_SMM are optional.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: Update prompt and help text for DELL_SMBIOS_* backends]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Mario Limonciello [Tue, 27 Feb 2018 18:23:03 +0000 (12:23 -0600)]
platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-base
This is being done to faciliate a later change to link all the dell-smbios
drivers together.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Mario Limonciello [Tue, 27 Feb 2018 18:23:02 +0000 (12:23 -0600)]
platform/x86: dell-smbios: Correct some style warnings
WARNING: function definition argument 'struct calling_interface_buffer *'
should also have an identifier name
+ int (*call_fn)(struct calling_interface_buffer *);
WARNING: Block comments use * on subsequent lines
+ /* 4 bytes of table header, plus 7 bytes of Dell header,
plus at least
+ 6 bytes of entry */
WARNING: Block comments use a trailing */ on a separate line
+ 6 bytes of entry */
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Linus Torvalds [Fri, 9 Mar 2018 17:33:48 +0000 (09:33 -0800)]
Merge tag 'powerpc-4.16-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One notable fix to properly advertise our support for a new firmware
feature, caused by two series conflicting semantically but not
textually.
There's a new ioctl for the new ocxl driver, which is not a fix, but
needed to complete the userspace API and good to have before the
driver is in a released kernel.
Finally three minor selftest fixes, and a fix for intermittent build
failures for some obscure platforms, caused by a missing make
dependency.
Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck"
* tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix vector5 in ibm architecture vector table
ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL
ocxl: Add get_metadata IOCTL to share OCXL information to userspace
selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable
selftests/powerpc: Fix missing clean of pmu/lib.o
powerpc/boot: Fix random libfdt related build errors
selftests/powerpc: Skip tm-trap if transactional memory is not enabled
Vijendar Mukunda [Fri, 9 Mar 2018 15:43:02 +0000 (21:13 +0530)]
ASoC: amd: 16bit resolution support for i2s sp instance
Moved 16bit resolution condition check for stoney platform
to acp_hw_params.Depending upon substream required register
value need to be programmed rather than enabling 16bit resolution
support all time in acp init.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Ross Zwisler [Fri, 9 Mar 2018 15:36:36 +0000 (08:36 -0700)]
loop: Fix lost writes caused by missing flag
The following commit:
commit
aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC")
replaced __do_lo_send_write(), which used ITER_KVEC iterators, with
lo_write_bvec() which uses ITER_BVEC iterators. In this change, though,
the WRITE flag was lost:
- iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len);
+ iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len);
This flag is necessary for the DAX case because we make decisions based on
whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and
in dax_iomap_rw().
We end up going through this path in configurations where we combine a PMEM
device with 4k sectors, a loopback device and DAX. The consequence of this
missed flag is that what we intend as a write actually turns into a read in
the DAX code, so no data is ever written.
The very simplest test case is to create a loopback device and try and
write a small string to it, then hexdump a few bytes of the device to see
if the write took. Without this patch you read back all zeros, with this
you read back the string you wrote.
For XFS this causes us to fail or panic during the following xfstests:
xfs/074 xfs/078 xfs/216 xfs/217 xfs/250
For ext4 we have a similar issue where writes never happen, but we don't
currently have any xfstests that use loopback and show this issue.
Fix this by restoring the WRITE flag argument to iov_iter_bvec(). This
causes the xfstests to all pass.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Fixes: commit
aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Masahiro Yamada [Tue, 6 Mar 2018 11:20:33 +0000 (20:20 +0900)]
clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency
The ATMEL_ST config selects MFD_SYSCON, but does not depend on HAS_IOMEM.
Compile testing on architecture without HAS_IOMEM causes "unmet direct
dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig".
Add the proper dependency to the ATMEL_ST config.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/1520335233-11277-1-git-send-email-yamada.masahiro@socionext.com
Boqun Feng [Fri, 9 Mar 2018 06:56:28 +0000 (14:56 +0800)]
rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites
When running rcutorture with TREE03 config, CONFIG_PROVE_LOCKING=y, and
kernel cmdline argument "rcutorture.gp_exp=1", lockdep reports a
HARDIRQ-safe->HARDIRQ-unsafe deadlock:
================================
WARNING: inconsistent lock state
4.16.0-rc4+ #1 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
takes:
__schedule+0xbe/0xaf0
{IN-HARDIRQ-W} state was registered at:
_raw_spin_lock+0x2a/0x40
scheduler_tick+0x47/0xf0
...
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rq->lock);
<Interrupt>
lock(&rq->lock);
*** DEADLOCK ***
1 lock held by rcu_torture_rea/724:
rcu_torture_read_lock+0x0/0x70
stack backtrace:
CPU: 2 PID: 724 Comm: rcu_torture_rea Not tainted 4.16.0-rc4+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
lock_acquire+0x90/0x200
? __schedule+0xbe/0xaf0
_raw_spin_lock+0x2a/0x40
? __schedule+0xbe/0xaf0
__schedule+0xbe/0xaf0
preempt_schedule_irq+0x2f/0x60
retint_kernel+0x1b/0x2d
RIP: 0010:rcu_read_unlock_special+0x0/0x680
? rcu_torture_read_unlock+0x60/0x60
__rcu_read_unlock+0x64/0x70
rcu_torture_read_unlock+0x17/0x60
rcu_torture_reader+0x275/0x450
? rcutorture_booster_init+0x110/0x110
? rcu_torture_stall+0x230/0x230
? kthread+0x10e/0x130
kthread+0x10e/0x130
? kthread_create_worker_on_cpu+0x70/0x70
? call_usermodehelper_exec_async+0x11a/0x150
ret_from_fork+0x3a/0x50
This happens with the following even sequence:
preempt_schedule_irq();
local_irq_enable();
__schedule():
local_irq_disable(); // irq off
...
rcu_note_context_switch():
rcu_note_preempt_context_switch():
rcu_read_unlock_special():
local_irq_save(flags);
...
raw_spin_unlock_irqrestore(...,flags); // irq remains off
rt_mutex_futex_unlock():
raw_spin_lock_irq();
...
raw_spin_unlock_irq(); // accidentally set irq on
<return to __schedule()>
rq_lock():
raw_spin_lock(); // acquiring rq->lock with irq on
which means rq->lock becomes a HARDIRQ-unsafe lock, which can cause
deadlocks in scheduler code.
This problem was introduced by commit
02a7c234e540 ("rcu: Suppress
lockdep false-positive ->boost_mtx complaints"). That brought the user
of rt_mutex_futex_unlock() with irq off.
To fix this, replace the *lock_irq() in rt_mutex_futex_unlock() with
*lock_irq{save,restore}() to make it safe to call rt_mutex_futex_unlock()
with irq off.
Fixes:
02a7c234e540 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints")
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20180309065630.8283-1-boqun.feng@gmail.com
Francis Deslauriers [Fri, 9 Mar 2018 03:18:12 +0000 (22:18 -0500)]
x86/kprobes: Fix kernel crash when probing .entry_trampoline code
Disable the kprobe probing of the entry trampoline:
.entry_trampoline is a code area that is used to ensure page table
isolation between userspace and kernelspace.
At the beginning of the execution of the trampoline, we load the
kernel's CR3 register. This has the effect of enabling the translation
of the kernel virtual addresses to physical addresses. Before this
happens most kernel addresses can not be translated because the running
process' CR3 is still used.
If a kprobe is placed on the trampoline code before that change of the
CR3 register happens the kernel crashes because int3 handling pages are
not accessible.
To fix this, add the .entry_trampoline section to the kprobe blacklist
to prohibit the probing of code before all the kernel pages are
accessible.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: mathieu.desnoyers@efficios.com
Cc: mhiramat@kernel.org
Link: http://lkml.kernel.org/r/1520565492-4637-2-git-send-email-francis.deslauriers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Song Liu [Tue, 6 Mar 2018 05:55:04 +0000 (21:55 -0800)]
perf/core: Fix ctx_event_type in ctx_resched()
In ctx_resched(), EVENT_FLEXIBLE should be sched_out when EVENT_PINNED is
added. However, ctx_resched() calculates ctx_event_type before checking
this condition. As a result, pinned events will NOT get higher priority
than flexible events.
The following shows this issue on an Intel CPU (where ref-cycles can
only use one hardware counter).
1. First start:
perf stat -C 0 -e ref-cycles -I 1000
2. Then, in the second console, run:
perf stat -C 0 -e ref-cycles:D -I 1000
The second perf uses pinned events, which is expected to have higher
priority. However, because it failed in ctx_resched(). It is never
run.
This patch fixes this by calculating ctx_event_type after re-evaluating
event_type.
Reported-by: Ephraim Park <ephiepark@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <jolsa@redhat.com>
Cc: <kernel-team@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes:
487f05e18aa4 ("perf/core: Optimize event rescheduling on active contexts")
Link: http://lkml.kernel.org/r/20180306055504.3283731-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jens Axboe [Fri, 9 Mar 2018 02:12:59 +0000 (19:12 -0700)]
Merge branch 'nvme-4.16-rc5' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes for this series from Keith:
"A few late fixes for 4.16:
* Reverting sysfs slave device links for native nvme multipathing.
The hidden disk attributes broke common user tools.
* A fix for a PPC pci error handling regression.
* Update pci interrupt count to consider the actual IRQ spread, fixing
potentially poor initial queue affinity.
* Off-by-one errors in nvme-fc queue sizes
* A fabrics discovery fix to be more tolerant with user tools."
* 'nvme-4.16-rc5' of git://git.infradead.org/nvme:
nvme_fc: rework sqsize handling
nvme-fabrics: Ignore nr_io_queues option for discovery controllers
Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers"
nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectors
nvme-pci: Fix EEH failure on ppc
Dave Airlie [Thu, 8 Mar 2018 23:23:02 +0000 (09:23 +1000)]
Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 4.16. A bit bigger than I would have liked, but most of that
is DC fixes which Harry helped me pull together from the past few weeks.
Highlights:
- Fix DL DVI with DC
- Various RV fixes for DC
- Overlay fixes for DC
- Fix HDMI2 handling on boards without HBR tables in the vbios
- Fix crash with pass-through on SI on amdgpu
- Fix RB harvesting on KV
- Fix hibernation failures on UVD with certain cards
* 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: (35 commits)
drm/amd/display: validate plane format on primary plane
drm/amdgpu:Always save uvd vcpu_bo in VM Mode
drm/amdgpu:Correct max uvd handles
drm/amd/display: early return if not in vga mode in disable_vga
drm/amd/display: Fix takover from VGA mode
drm/amd/display: Fix memleaks when atomic check fails.
drm/amd/display: Return success when enabling interrupt
drm/amd/display: Use crtc enable/disable_vblank hooks
drm/amd/display: update infoframe after dig fe is turned on
drm/amd/display: fix boot-up on vega10
drm/amd/display: fix cursor related Pstate hang
drm/amd/display: Set irq state only on existing crtcs
drm/amd/display: Fixed non-native modes not lighting up
drm/amd/display: Call update_stream_signal directly from amdgpu_dm
drm/amd/display: Make create_stream_for_sink more consistent
drm/amd/display: Don't block dual-link DVI modes
drm/amd/display: Don't allow dual-link DVI on all ASICs.
drm/amd/display: Pass signal directly to enable_tmds_output
drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink
drm/amd/display: Move MAX_TMDS_CLOCK define to header
...
Dave Airlie [Thu, 8 Mar 2018 23:22:44 +0000 (09:22 +1000)]
Merge tag 'drm-misc-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
sun4i fixes on clk, division by zero and LVDS.
* tag 'drm-misc-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/sun4i: crtc: Call drm_crtc_vblank_on / drm_crtc_vblank_off
drm/sun4i: rgb: Fix potential division by zero
drm/sun4i: tcon: Reduce the scope of the LVDS error a bit
drm/sun4i: Release exclusive clock lock when disabling TCON
drm/sun4i: Fix dclk_set_phase
Dave Airlie [Thu, 8 Mar 2018 23:22:19 +0000 (09:22 +1000)]
Merge tag 'drm-intel-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- 2 fixes: 1 for perf and 1 execlist submission race.
* tag 'drm-intel-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Suspend submission tasklets around wedging
drm/i915/perf: fix perf stream opening lock
Linus Torvalds [Thu, 8 Mar 2018 18:03:12 +0000 (10:03 -0800)]
Merge tag 'mips_fixes_4.16_4' of git://git./linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A miscellaneous pile of MIPS fixes for 4.16:
- move put_compat_sigset() to evade hardened usercopy warnings (4.16)
- select ARCH_HAVE_PC_{SERIO,PARPORT} for Loongson64 platforms (4.16)
- fix kzalloc() failure handling in ath25 (3.19) and Octeon (4.0)
- fix disabling of IPIs during BMIPS suspend (3.19)"
* tag 'mips_fixes_4.16_4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: BMIPS: Do not mask IPIs during suspend
MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_SERIO
MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_PARPORT
signals: Move put_compat_sigset to compat.h to silence hardened usercopy
MIPS: OCTEON: irq: Check for null return on kzalloc allocation
MIPS: ath25: Check for kzalloc allocation failure
Linus Torvalds [Thu, 8 Mar 2018 18:00:47 +0000 (10:00 -0800)]
Merge tag 'chrome-platform-4.16-rc4-fixes' of git://git./linux/kernel/git/bleung/chrome-platform
Pull chrome platform fix from Benson Leung:
"Revert a problematic patch that constified something imporperly"
* tag 'chrome-platform-4.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
Revert "platform/chrome: chromeos_laptop: make chromeos_laptop const"
James Smart [Wed, 7 Mar 2018 23:59:36 +0000 (15:59 -0800)]
nvme_fc: rework sqsize handling
Corrected four outstanding issues in the transport around sqsize.
1: Create Connection LS is sending the 1's-based sqsize, should be
sending the 0's-based value.
2: allocation of hw queue is using the 0's-base size. It should be
using the 1's-based value.
3: normalization of ctrl.sqsize by MQES is using MQES+1 (1's-based
value). It should be MQES (0's-based value).
4: Missing clause to ensure queue_count not larger than ctrl->sqsize.
Corrected by:
Clean up routines that pass queue size around. The queue size value is
the actual count (1's-based) value and determined from ctrl->sqsize + 1.
Routines that send 0's-based value adapt from queue size.
Sset ctrl->sqsize properly for MQES.
Added clause to nsure queue_count not larger than ctrl->sqsize + 1.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Dennis Wassenberg [Thu, 8 Mar 2018 14:49:24 +0000 (15:49 +0100)]
ALSA: hda: add dock and led support for HP ProBook 640 G2
This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP ProBook 640 G2
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dennis Wassenberg [Thu, 8 Mar 2018 14:49:03 +0000 (15:49 +0100)]
ALSA: hda: add dock and led support for HP EliteBook 820 G3
This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP EliteBook 820 G3
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jens Axboe [Thu, 8 Mar 2018 16:24:52 +0000 (09:24 -0700)]
Merge branch 'stable/for-jens-4.15' of git://git./linux/kernel/git/konrad/xen into for-linus
Pull a xen_blkfront fix from Konrad:
"It has one simple fix for the multi-queue support not showing up after
a block device was detached/re-attached."
* 'stable/for-jens-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen-blkfront: move negotiate_mq to cover all cases of new VBDs
Roland Dreier [Mon, 5 Mar 2018 19:59:53 +0000 (11:59 -0800)]
nvme-fabrics: Ignore nr_io_queues option for discovery controllers
This removes a dependency on the order options are passed when creating
a fabrics controller. With the old code, if "nr_io_queues" appears before
an "nqn" option specifying the discovery controller, then nr_io_queues
is overridden with zero. If "nr_io_queues" appears after specifying the
discovery controller, then the nr_io_queues option is used to set the
number of queues, and the driver attempts to establish IO connections
to the discovery controller (which doesn't work).
It seems better to ignore (and warn about) the "nr_io_queues" option
if userspace has already asked to connect to the discovery controller.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
James Hogan [Thu, 8 Mar 2018 11:02:46 +0000 (11:02 +0000)]
kbuild: Handle builtin dtb file names containing hyphens
cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree
FDT (that is, the .dtb file) as binary data in the kernel image. This
assembly source contains labels before and after the binary data. The
label names incorporate the file name of the corresponding .dtb file.
Hyphens are not legal characters in labels, so .dtb files built into the
kernel with hyphens in the file name result in errors like the
following:
bcm3368-netgear-cvg834g.dtb.S: Assembler messages:
bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'
bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'
bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'
bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'
Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file
name to underscores when constructing the labels.
As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC
contain hyphens in their names, but the issue only currently manifests
on Broadcom MIPS platforms, as that is the only place where such files
are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y,
or on BMIPS kernels when the dtbs target is used (in the latter case it
admittedly shouldn't really build all the dtb.o files, but thats a
separate issue).
Fixes:
695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Matteo Croce [Wed, 14 Feb 2018 17:47:18 +0000 (18:47 +0100)]
scripts/bloat-o-meter: fix typos in help
The bloat-o-meter script has two typos in the help, fix both.
Fixes:
192efb7a1f9b ("bloat-o-meter: provide 3 different arguments for data, function and All")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Seunghun Han [Tue, 6 Mar 2018 14:21:43 +0000 (15:21 +0100)]
x86/MCE: Serialize sysfs changes
The check_interval file in
/sys/devices/system/machinecheck/machinecheck<cpu number>
directory is a global timer value for MCE polling. If it is changed by one
CPU, mce_restart() broadcasts the event to other CPUs to delete and restart
the MCE polling timer and __mcheck_cpu_init_timer() reinitializes the
mce_timer variable.
If more than one CPU writes a specific value to the check_interval file
concurrently, mce_timer is not protected from such concurrent accesses and
all kinds of explosions happen. Since only root can write to those sysfs
variables, the issue is not a big deal security-wise.
However, concurrent writes to these configuration variables is void of
reason so the proper thing to do is to serialize the access with a mutex.
Boris:
- Make store_int_with_restart() use device_store_ulong() to filter out
negative intervals
- Limit min interval to 1 second
- Correct locking
- Massage commit message
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180302202706.9434-1-kkamagui@gmail.com
Tony Luck [Tue, 6 Mar 2018 14:21:41 +0000 (15:21 +0100)]
x86/MCE: Save microcode revision in machine check records
Updating microcode used to be relatively rare. Now that it has become
more common we should save the microcode version in a machine check
record to make sure that those people looking at the error have this
important information bundled with the rest of the logged information.
[ Borislav: Simplify a bit. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180301233449.24311-1-tony.luck@intel.com
Arvind Yadav [Tue, 6 Mar 2018 10:10:37 +0000 (15:40 +0530)]
xen: xenbus: use put_device() instead of kfree()
Never directly free @dev after calling device_register(), even
if it returned an error! Always use put_device() to give up the
reference initialized.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Dennis Wassenberg [Thu, 8 Mar 2018 12:17:54 +0000 (13:17 +0100)]
ALSA: hda/realtek - Make dock sound work on ThinkPad L570
One version of Lenovo Thinkpad T570 did not use ALC298
(like other Kaby Lake devices). Instead it uses ALC292.
In order to make the Lenovo dock working with that codec
the dock quirk for ALC292 will be used.
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Seunghun Han [Wed, 7 Mar 2018 04:32:15 +0000 (13:32 +0900)]
x86/pti: Fix a comment typo
s/visinble/visible/
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1520397135-132809-1-git-send-email-kkamagui@gmail.com
Takashi Iwai [Thu, 8 Mar 2018 11:01:25 +0000 (12:01 +0100)]
ALSA: seq: Remove superfluous snd_seq_queue_client_leave_cells() call
With the previous two fixes for the write / ioctl races:
ALSA: seq: Don't allow resizing pool in use
ALSA: seq: More protection for concurrent write and ioctl races
the cells aren't any longer in queues at the point calling
snd_seq_pool_done() in snd_seq_ioctl_set_client_pool(). Hence the
function call snd_seq_queue_client_leave_cells() can be dropped safely
from there.
Suggested-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 5 Mar 2018 21:06:09 +0000 (22:06 +0100)]
ALSA: seq: More protection for concurrent write and ioctl races
This patch is an attempt for further hardening against races between
the concurrent write and ioctls. The previous fix
d15d662e89fc
("ALSA: seq: Fix racy pool initializations") covered the race of the
pool initialization at writer and the pool resize ioctl by the
client->ioctl_mutex (CVE-2018-
1000004). However, basically this mutex
should be applied more widely to the whole write operation for
avoiding the unexpected pool operations by another thread.
The only change outside snd_seq_write() is the additional mutex
argument to helper functions, so that we can unlock / relock the given
mutex temporarily during schedule() call for blocking write.
Fixes:
d15d662e89fc ("ALSA: seq: Fix racy pool initializations")
Reported-by: 范龙飞 <long7573@126.com>
Reported-by: Nicolai Stange <nstange@suse.de>
Reviewed-and-tested-by: Nicolai Stange <nstange@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ashok Raj [Wed, 28 Feb 2018 10:28:46 +0000 (11:28 +0100)]
x86/microcode: Synchronize late microcode loading
Original idea by Ashok, completely rewritten by Borislav.
Before you read any further: the early loading method is still the
preferred one and you should always do that. The following patch is
improving the late loading mechanism for long running jobs and cloud use
cases.
Gather all cores and serialize the microcode update on them by doing it
one-by-one to make the late update process as reliable as possible and
avoid potential issues caused by the microcode update.
[ Borislav: Rewrite completely. ]
Co-developed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: https://lkml.kernel.org/r/20180228102846.13447-8-bp@alien8.de
Borislav Petkov [Wed, 28 Feb 2018 10:28:45 +0000 (11:28 +0100)]
x86/microcode: Request microcode on the BSP
... so that any newer version can land in the cache and can later be
fished out by the application functions. Do that before grabbing the
hotplug lock.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: https://lkml.kernel.org/r/20180228102846.13447-7-bp@alien8.de
Borislav Petkov [Wed, 28 Feb 2018 10:28:44 +0000 (11:28 +0100)]
x86/microcode/intel: Look into the patch cache first
The cache might contain a newer patch - look in there first.
A follow-on change will make sure newest patches are loaded into the
cache of microcode patches.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: https://lkml.kernel.org/r/20180228102846.13447-6-bp@alien8.de
Ashok Raj [Wed, 28 Feb 2018 10:28:43 +0000 (11:28 +0100)]
x86/microcode: Do not upload microcode if CPUs are offline
Avoid loading microcode if any of the CPUs are offline, and issue a
warning. Having different microcode revisions on the system at any time
is outright dangerous.
[ Borislav: Massage changelog. ]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: http://lkml.kernel.org/r/1519352533-15992-4-git-send-email-ashok.raj@intel.com
Link: https://lkml.kernel.org/r/20180228102846.13447-5-bp@alien8.de
Ashok Raj [Wed, 28 Feb 2018 10:28:42 +0000 (11:28 +0100)]
x86/microcode/intel: Writeback and invalidate caches before updating microcode
Updating microcode is less error prone when caches have been flushed and
depending on what exactly the microcode is updating. For example, some
of the issues around certain Broadwell parts can be addressed by doing a
full cache flush.
[ Borislav: Massage it and use native_wbinvd() in both cases. ]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: http://lkml.kernel.org/r/1519352533-15992-3-git-send-email-ashok.raj@intel.com
Link: https://lkml.kernel.org/r/20180228102846.13447-4-bp@alien8.de
Ashok Raj [Wed, 28 Feb 2018 10:28:41 +0000 (11:28 +0100)]
x86/microcode/intel: Check microcode revision before updating sibling threads
After updating microcode on one of the threads of a core, the other
thread sibling automatically gets the update since the microcode
resources on a hyperthreaded core are shared between the two threads.
Check the microcode revision on the CPU before performing a microcode
update and thus save us the WRMSR 0x79 because it is a particularly
expensive operation.
[ Borislav: Massage changelog and coding style. ]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: http://lkml.kernel.org/r/1519352533-15992-2-git-send-email-ashok.raj@intel.com
Link: https://lkml.kernel.org/r/20180228102846.13447-3-bp@alien8.de
Borislav Petkov [Wed, 28 Feb 2018 10:28:40 +0000 (11:28 +0100)]
x86/microcode: Get rid of struct apply_microcode_ctx
It is a useless remnant from earlier times. Use the ucode_state enum
directly.
No functional change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: https://lkml.kernel.org/r/20180228102846.13447-2-bp@alien8.de
Konrad Rzeszutek Wilk [Mon, 26 Feb 2018 14:35:01 +0000 (09:35 -0500)]
x86/spectre_v2: Don't check microcode versions when running under hypervisors
As:
1) It's known that hypervisors lie about the environment anyhow (host
mismatch)
2) Even if the hypervisor (Xen, KVM, VMWare, etc) provided a valid
"correct" value, it all gets to be very murky when migration happens
(do you provide the "new" microcode of the machine?).
And in reality the cloud vendors are the ones that should make sure that
the microcode that is running is correct and we should just sing lalalala
and trust them.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: kvm <kvm@vger.kernel.org>
Cc: Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180226213019.GE9497@char.us.oracle.com
Takashi Iwai [Mon, 5 Mar 2018 21:00:55 +0000 (22:00 +0100)]
ALSA: seq: Don't allow resizing pool in use
This is a fix for a (sort of) fallout in the recent commit
d15d662e89fc ("ALSA: seq: Fix racy pool initializations") for
CVE-2018-
1000004.
As the pool resize deletes the existing cells, it may lead to a race
when another thread is writing concurrently, eventually resulting a
UAF.
A simple workaround is not to allow the pool resizing when the pool is
in use. It's an invalid behavior in anyway.
Fixes:
d15d662e89fc ("ALSA: seq: Fix racy pool initializations")
Reported-by: 范龙飞 <long7573@126.com>
Reported-by: Nicolai Stange <nstange@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Andy Lutomirski [Wed, 7 Mar 2018 19:12:27 +0000 (11:12 -0800)]
x86/vsyscall/64: Drop "native" vsyscalls
Since Linux v3.2, vsyscalls have been deprecated and slow. From v3.2
on, Linux had three vsyscall modes: "native", "emulate", and "none".
"emulate" is the default. All known user programs work correctly in
emulate mode, but vsyscalls turn into page faults and are emulated.
This is very slow. In "native" mode, the vsyscall page is easily
usable as an exploit gadget, but vsyscalls are a bit faster -- they
turn into normal syscalls. (This is in contrast to vDSO functions,
which can be much faster than syscalls.) In "none" mode, there are
no vsyscalls.
For all practical purposes, "native" was really just a chicken bit
in case something went wrong with the emulation. It's been over six
years, and nothing has gone wrong. Delete it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/519fee5268faea09ae550776ce969fa6e88668b0.1520449896.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dmitry Torokhov [Tue, 6 Mar 2018 18:59:15 +0000 (10:59 -0800)]
Revert "platform/chrome: chromeos_laptop: make chromeos_laptop const"
This reverts commit
a376cd91606365609d8fbd57247618bd51da1fc6 because
chromeos_laptop instances should not be marked as "const" (at this
time), since i2c_peripheral is being modified (we change "state" and
"tries") when we instantiate devices.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Linus Torvalds [Thu, 8 Mar 2018 01:49:33 +0000 (17:49 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio bugfix from Michael Tsirkin:
"A bugfix for error handling in virtio"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_ring: fix num_free handling in error case
Linus Torvalds [Thu, 8 Mar 2018 01:37:32 +0000 (17:37 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- we are reverting patch that was switched touchpad on Lenovo T460P
over to native RMI because on these boxes BIOS messes up with SMBus
controller state. We might re-enable it later once SMBus issue is
resolved
- disabling interrupts in matrix_keypad driver was racy
- mms114 now has SPDX header and matching MODULE_LICENSE
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI"
Input: matrix_keypad - fix race when disabling interrupts
Input: mms114 - add SPDX identifier
Input: mms114 - fix license module information
Arkadiusz Hiler [Wed, 7 Mar 2018 23:40:28 +0000 (15:40 -0800)]
Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI"
This reverts commit
48282969826b3d3c76e908182f69724d86d995fe which
caused the following issues:
1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working
after suspend-resume cycle. Due to strange state of the device another
suspend is impossible.
The following dmesg errors can be observed:
thinkpad_acpi: EC reports that Thermal Table has changed
rmi4_smbus 7-002c: failed to get SMBus version number!
rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask.
rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16.
rmi4_f01 rmi4-00.fn01: Resume failed with code -16.
rmi4_physical rmi4-00: Failed to suspend functions: -16
rmi4_smbus 7-002c: Failed to resume device: -16
PM: resume devices took 0.640 seconds
rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16).
rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts!
rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!
psmouse: probe of serio3 failed with error -1
2. On another T460p with BIOS version 2.15 two finger scrolling gesture
on the touchpad stops working after suspend-resume cycle (about 75%
reproducibility, when it still works, the scrolling gesture becomes
laggy). Nothing suspicious appears in the dmesg.
Analysis form Richard Schütz:
"RMI is unreliable on the ThinkPad T460p because the device is affected
by the firmware behavior addressed in
a7ae81952cda ("i2c: i801: Allow
ACPI SystemIO OpRegion to conflict with PCI BAR")."
The affected devices often show:
i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers
i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited
Reported-by: Richard Schütz <rschuetz@uni-koblenz.de>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Tested-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Shirish S [Wed, 7 Mar 2018 07:06:11 +0000 (12:36 +0530)]
drm/amd/display: validate plane format on primary plane
In dce110, the plane configuration is such that plane 0
or the primary plane should be rendered with only RGB data.
This patch adds the validation to ensure that no video data
is rendered on plane 0.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Tue, 6 Mar 2018 19:52:35 +0000 (14:52 -0500)]
drm/amdgpu:Always save uvd vcpu_bo in VM Mode
When UVD is in VM mode, there is not uvd handle exchanged,
uvd.handles are always 0. So vcpu_bo always need save,
Otherwise amdgpu driver will fail during suspend/resume.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
James Zhu [Tue, 6 Mar 2018 19:43:50 +0000 (14:43 -0500)]
drm/amdgpu:Correct max uvd handles
Max uvd handles should use adev->uvd.max_handles instead of
AMDGPU_MAX_UVD_HANDLES here.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Eric Yang [Wed, 28 Feb 2018 19:45:36 +0000 (14:45 -0500)]
drm/amd/display: early return if not in vga mode in disable_vga
The work around for hw bug causes S3 resume failure. Don't execute
disable vga logic if not in vga mode.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Tue, 27 Feb 2018 17:12:46 +0000 (12:12 -0500)]
drm/amd/display: Fix takover from VGA mode
HW Engineer's Notes:
During switch from vga->extended, if we set the VGA_TEST_ENABLE and then
hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly.
Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset
VGA_TEST_ENABLE, to leave it in the same state as before.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 20 Feb 2018 20:46:09 +0000 (15:46 -0500)]
drm/amd/display: Fix memleaks when atomic check fails.
While checking plane states for updates during atomic check, we create
dc_plane_states in preparation. These dc states should be freed if
something errors.
Although the input transfer function is also freed by
dc_plane_state_release(), we should free it (on error) under the same
scope as where it is created.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 13 Feb 2018 16:03:01 +0000 (11:03 -0500)]
drm/amd/display: Return success when enabling interrupt
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 13 Feb 2018 15:54:26 +0000 (10:54 -0500)]
drm/amd/display: Use crtc enable/disable_vblank hooks
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Wed, 21 Feb 2018 21:37:16 +0000 (16:37 -0500)]
drm/amd/display: update infoframe after dig fe is turned on
Before dig fe is enabled, infoframe can't be programmed. So in
suspend resume case our infoframe programmming was not going through.
This change changes the sequence so that infoframe is programmed
after.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 23 Jan 2018 16:12:27 +0000 (11:12 -0500)]
drm/amd/display: fix boot-up on vega10
Fixing null-deref on Vega10 due to regression after
'fix cursor related Pstate hang' change.
Added null checks in setting cursor position.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Fri, 19 Jan 2018 00:07:54 +0000 (19:07 -0500)]
drm/amd/display: fix cursor related Pstate hang
Move cursor programming to inside the OTG_MASTER_UPDATE_LOCK
If graphics plane go from 1 pipe to hsplit, the cursor updates
after mpc programming and unlock. Which means there is a window
of time where cursor is enabled on the wrong pipe if it's on
the right side of the screen (i.e. case where cursor need to
move from pipe 0 to pipe 3 post split). This will cause pstate hang.
Solution is to program the cursor while still locked.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikita Lipski [Thu, 18 Jan 2018 19:53:57 +0000 (14:53 -0500)]
drm/amd/display: Set irq state only on existing crtcs
Because AMDGPU_CRTC_IRQ_VLINE1 = 6, it expected 6 more crtcs to be
programed with disabled irq state in amdgpu_irq_disable_all. That caused errors and accessed
the wrong memory location.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jerry (Fangzhi) Zuo [Wed, 17 Jan 2018 18:24:28 +0000 (13:24 -0500)]
drm/amd/display: Fixed non-native modes not lighting up
There is no need to call drm_mode_set_crtcinfo() again once
crtc timing is decided. Otherwise non-native/unsupported timing
might get overwritten.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 18 Dec 2017 17:01:30 +0000 (12:01 -0500)]
drm/amd/display: Call update_stream_signal directly from amdgpu_dm
There's no good place in DC to cover all place where stream signal should
be updated. update_stream_signal depends on timing which comes from DM.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 18 Dec 2017 18:48:12 +0000 (13:48 -0500)]
drm/amd/display: Make create_stream_for_sink more consistent
We've got a helper function to call dc_create_stream_for_sink and one
other place that calls it directly. Make sure we call the helper
functions always since we need to update a bunch of things in stream and
don't want to miss that.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>