OSDN Git Service
Kostya Shishkov [Tue, 16 Aug 2011 07:10:57 +0000 (09:10 +0200)]
rmdec: parse FPS in RealMedia properly
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Kostya Shishkov [Mon, 15 Aug 2011 10:03:40 +0000 (12:03 +0200)]
Use parsers for RealVideo 3/4 to determine correct PTS
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Kostya Shishkov [Thu, 11 Aug 2011 12:44:05 +0000 (14:44 +0200)]
rmdec: correct DTS calculation in RealMedia container.
First, container stores only DTS and not PTS as it was believed.
Second, multiple frames in a packet store timestamp instead of position
after the frame length.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Kostya Shishkov [Wed, 17 Aug 2011 08:36:33 +0000 (10:36 +0200)]
rv10/20: tell decoder to use edge emulation
This removes out-of-edge motion compensation artifacts (easily spotted green
blocks in avplay, gray blocks in transcoding), for example here:
http://samples.libav.org/samples/real/tv_watching_t1.rm
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Anton Khirnov [Tue, 16 Aug 2011 18:59:14 +0000 (20:59 +0200)]
Revert "avconv: use stream copy by default when possible."
This reverts commit
4f4f33844a7369e5579912cc02f3c5376b1e6872.
This commit has some ugly corner cases and needs to be discussed
further.
Anton Khirnov [Tue, 16 Aug 2011 04:58:52 +0000 (06:58 +0200)]
avconv: print stream copy information.
Anton Khirnov [Sat, 13 Aug 2011 06:37:13 +0000 (08:37 +0200)]
avconv: use stream copy by default when possible.
Anton Khirnov [Tue, 16 Aug 2011 04:52:50 +0000 (06:52 +0200)]
matroskaenc: vertical alignment.
Anton Khirnov [Thu, 11 Aug 2011 18:35:46 +0000 (20:35 +0200)]
matroskaenc: implement query_codec()
Anton Khirnov [Thu, 11 Aug 2011 18:34:45 +0000 (20:34 +0200)]
lavf: add avformat_query_codec().
It allows to check if a given codec can be written into a container.
Anton Khirnov [Thu, 11 Aug 2011 15:45:50 +0000 (17:45 +0200)]
lavc: add avcodec_get_type() for mapping codec_id -> type.
Luca Barbato [Wed, 8 Jun 2011 14:32:07 +0000 (14:32 +0000)]
flvenc: use int64_t to store offsets
Metadata currently is written only at the start of the file in normal
cases, when transcoding from a rtmp source metadata could be
written later and the offset recorded can exceed 32bit.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Anton Khirnov [Tue, 16 Aug 2011 09:32:57 +0000 (11:32 +0200)]
avconv: don't segfault on 0 input files.
Diogo Franco [Tue, 16 Aug 2011 09:43:23 +0000 (09:43 +0000)]
Do not write ID3v1 tags by default
ID3v1 are legacy tags with several limitations; furthermore
avconv/ffmpeg writes the tags in UTF-8 which probably has near-0
software support.
Add a -write_id3v1 option to be able to turn it on; disabled by default.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Alex Converse [Tue, 16 Aug 2011 01:14:12 +0000 (18:14 -0700)]
mpegts: log into an AVFormatContext rather than MpegTSContext.
MpegTSContext's AVClass member can be NULL.
Anton Khirnov [Thu, 11 Aug 2011 14:33:03 +0000 (16:33 +0200)]
movenc: change AV_LOG_INFO to AV_LOG_WARNING for some warnings
Anton Khirnov [Mon, 15 Aug 2011 16:26:56 +0000 (18:26 +0200)]
avconv: remove a write-only variable
Anton Khirnov [Sat, 13 Aug 2011 06:23:44 +0000 (08:23 +0200)]
avconv: remove pointless parameter from new_*_stream().
New streams are always added to the last output file.
Anton Khirnov [Sat, 13 Aug 2011 06:08:13 +0000 (08:08 +0200)]
avconv: cosmetics, move code
Move find_codec_or_die(), choose_codec(), new_output_stream() and
read_avserver_streams() below transcode() where they belong.
Anton Khirnov [Sat, 13 Aug 2011 05:56:38 +0000 (07:56 +0200)]
avconv: cosmetics -- move copy_chapters().
It's only used in opt_output_file(), so move it right above
opt_output_file().
Anton Khirnov [Sat, 13 Aug 2011 05:55:04 +0000 (07:55 +0200)]
avconv: cosmetics -- move parse_forced_key_frames().
parse_forced_key_frames() is only used in new_video_stream(), so move it
right above new_video_stream().
Anton Khirnov [Tue, 9 Aug 2011 11:56:36 +0000 (13:56 +0200)]
lavc: add audio flag to the 'b' option, deprecate 'ab'.
Its only reason for its existence was ffmpeg's inability to properly assign
AVOptions to streams. Now this is not a problem anymore, so 'ab' should
go.
Anton Khirnov [Tue, 9 Aug 2011 09:32:16 +0000 (11:32 +0200)]
avconv: rename sameq to same_quant
It's often mistakenly used as 'same quality', emphasize that it's not
true in the manual.
Anton Khirnov [Tue, 9 Aug 2011 09:05:04 +0000 (11:05 +0200)]
doc/avconv: add forgotten end of chapter.
Anton Khirnov [Fri, 29 Jul 2011 12:17:01 +0000 (14:17 +0200)]
Changelog: document avconv incompatibilities with ffmpeg.
Anton Khirnov [Mon, 8 Aug 2011 12:29:37 +0000 (14:29 +0200)]
avconv: replace -vcodec/-acodec/-scodec with a better system.
The new option doesn't depend on its placement wrt -new* options (which
don't exist anymore) and works in a similar way as per-stream AVOptions.
-[vas]codec remain as aliases to -codec:[vas]
Anton Khirnov [Fri, 12 Aug 2011 17:19:19 +0000 (19:19 +0200)]
avconv: remove presets.
Nothing except x264 uses them and native x264 presets should be used
with private options.
Dustin Brody [Fri, 12 Aug 2011 16:05:46 +0000 (12:05 -0400)]
svq3: propagate codec memory allocation failure in context init
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Dave Yeo [Sun, 14 Aug 2011 18:46:18 +0000 (11:46 -0700)]
Fix NASM include directive
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Alex Converse [Sun, 14 Aug 2011 03:02:37 +0000 (20:02 -0700)]
dsputil_mmx: Honor HAVE_AMD3DNOW
Anton Khirnov [Sun, 17 Jul 2011 05:45:33 +0000 (07:45 +0200)]
lavf,lavd: remove all usage of AVFormatParameters from demuxers.
AVFormatParameters are converted into corresponding private options in
av_open_input_file/stream() compat wrappers, so accessing them from
demuxers is redundant.
Anton Khirnov [Sun, 17 Jul 2011 06:08:57 +0000 (08:08 +0200)]
jack: add 'channels' private option.
Get rid of AVFormatParameters usage.
Reimar Döffinger [Sat, 13 Aug 2011 09:58:18 +0000 (11:58 +0200)]
VC-1: fix reading of custom PAR.
Custom PAR num/denum are in 1-256 range.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Kostya Shishkov [Sun, 14 Aug 2011 18:02:26 +0000 (20:02 +0200)]
Remove redundant and dubious video codec detection by its extradata
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Dustin Brody [Fri, 12 Aug 2011 05:30:20 +0000 (01:30 -0400)]
mpeg12: remove repeat-field code disabled since May 2002
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Michael Niedermayer [Sat, 9 Apr 2011 10:50:03 +0000 (10:50 +0000)]
patch checklist: suggest fate instead of regression tests
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Kostya [Sat, 13 Aug 2011 16:44:21 +0000 (16:44 +0000)]
Turn on resampling on sudden size change instead of bailing out during recode.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Kostya [Sat, 13 Aug 2011 16:44:04 +0000 (16:44 +0000)]
avtools: reinitialise filter chain when input video stream changes dimensions
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Nathan Caldwell [Fri, 29 Jul 2011 20:49:04 +0000 (14:49 -0600)]
aacenc: Fix number of coefficients used in a LFE channel.
The spec states:
* Only the lowest 12 spectral coefficients of any LFE may be non-zero
We were using the 12 lowest *bands*.
Nathan Caldwell [Sat, 23 Jul 2011 07:19:34 +0000 (01:19 -0600)]
aacenc: Fix a segfault with grouped psymodel.
10l: Forgot about TYPE_LFE being after TYPE_CPE. Which causes a
segfault when encoding 5.1
Luca Barbato [Wed, 10 Aug 2011 00:16:26 +0000 (02:16 +0200)]
swscale: add dithering to yuv2yuvX_altivec_real
It just does that part in scalar form, I doubt using a vector store
over 2 array would speed it up particularly.
The function should be written to not use a scratch buffer.
Kostya Shishkov [Fri, 12 Aug 2011 19:50:28 +0000 (21:50 +0200)]
rv34: free+allocate buffer instead of reallocating it to preserve alignment
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Ronald S. Bultje [Fri, 12 Aug 2011 19:32:31 +0000 (12:32 -0700)]
h264: add missing brackets.
This caused failure of a few fate tests.
Ronald S. Bultje [Tue, 2 Aug 2011 22:42:35 +0000 (15:42 -0700)]
swscale: use 15-bit intermediates for 9/10-bit scaling.
Ronald S. Bultje [Wed, 3 Aug 2011 16:48:08 +0000 (09:48 -0700)]
Move x86util.asm from libavcodec/ to libavutil/.
This allows using it in swscale also.
Ronald S. Bultje [Sun, 24 Jul 2011 01:36:35 +0000 (18:36 -0700)]
Move x86inc.asm to libavutil/.
This allows using it in libswscale/ also.
Dustin Brody [Sat, 6 Aug 2011 05:42:35 +0000 (01:42 -0400)]
APIchanges: note error_recognition in lavf
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Dustin Brody [Sat, 6 Aug 2011 04:42:34 +0000 (04:42 +0000)]
lavf: add support for error_recognition, use it in avidec, and bump minor API version
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Anton Khirnov [Fri, 29 Jul 2011 13:21:51 +0000 (15:21 +0200)]
avconv: change semantics of -map
New syntax contains an optional stream type, allowing to refer to n-th
stream of specific type.
Omitting stream number now maps all streams of the given type.
Anton Khirnov [Fri, 29 Jul 2011 06:36:13 +0000 (08:36 +0200)]
avconv: get rid of new* options.
They are confusing, irregular and redundant -- -map already contains all
the information. Stream maps can now be parsed in opt_output_file().
Add a more user-friendly default behavior in case no maps are present.
Breaks -programid for now, but it never worked properly anyway. A better
solution will be written soon.
Anton Khirnov [Thu, 28 Jul 2011 14:47:38 +0000 (16:47 +0200)]
cmdutils: allow precisely specifying a stream for AVOptions.
Pino Toscano [Fri, 12 Aug 2011 12:11:21 +0000 (14:11 +0200)]
configure: add missing CFLAGS to fix building on the HURD
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Reinhard Tartler [Tue, 9 Aug 2011 12:44:12 +0000 (14:44 +0200)]
libx264: Include hint for possible values for configuring libx264
The output of the x264 commandline tool contains the most uptodate
description of the possible values for the -preset, -tune and -profile
options.
Anton Khirnov [Fri, 29 Jul 2011 11:47:37 +0000 (13:47 +0200)]
cmdutils: allow ':'-separated modifiers in option names.
Anton Khirnov [Fri, 29 Jul 2011 11:07:27 +0000 (13:07 +0200)]
avconv: make -map_metadata work consistently with the other options
Before, it took an input and output file index, now it only takes an
input file and applies to the next output file.
Stream/chapter/program specification is now part of the option name and
the delimiter was changed from ',' to ':' to be consistent with the
similar feature for AVOptions.
Anton Khirnov [Thu, 28 Jul 2011 10:57:24 +0000 (12:57 +0200)]
avconv: remove deprecated options.
Anton Khirnov [Wed, 27 Jul 2011 19:39:12 +0000 (21:39 +0200)]
avconv: make -map_chapters accept only the input file index.
This is consistent with how all the other options work.
Anton Khirnov [Wed, 27 Jul 2011 18:56:59 +0000 (20:56 +0200)]
Make a copy of ffmpeg under a new name -- avconv.
It will be further developed with a few incompatible changes.
ffmpeg.c will stay as is for some time, so any scripts using it won't be
broken.
Anton Khirnov [Wed, 27 Jul 2011 19:04:26 +0000 (21:04 +0200)]
ffmpeg: add a warning stating that the program is deprecated.
Kostya Shishkov [Wed, 10 Aug 2011 09:26:39 +0000 (11:26 +0200)]
Add weighted motion compensation for RV40 B-frames
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Kostya Shishkov [Wed, 10 Aug 2011 09:26:24 +0000 (11:26 +0200)]
RV3/4: calculate B-frame motion weights once per frame
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Kostya Shishkov [Tue, 9 Aug 2011 09:00:09 +0000 (11:00 +0200)]
Move RV3/4-specific DSP functions into their own context
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Dustin Brody [Thu, 11 Aug 2011 15:16:09 +0000 (11:16 -0400)]
mjpeg: propagate decode errors from ff_mjpeg_decode_sos and ff_mjpeg_decode_dqt
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Dustin Brody [Thu, 11 Aug 2011 12:57:58 +0000 (08:57 -0400)]
h264: notice memory allocation failure
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Justin Ruggles [Tue, 9 Aug 2011 22:11:08 +0000 (18:11 -0400)]
ac3enc: add macros for option names to make them more understandable.
Justin Ruggles [Wed, 10 Aug 2011 14:21:10 +0000 (10:21 -0400)]
ac3enc: fix 'channel_coupling' option to actually allow 'auto'.
Use 'auto' as the default value.
Mans Rullgard [Wed, 10 Aug 2011 17:52:11 +0000 (18:52 +0100)]
cavs: fix some crashes with invalid bitstreams
This removes all valgrind-reported invalid writes with one
specific test file.
Fixes http://www.ocert.org/advisories/ocert-2011-002.html
Signed-off-by: Mans Rullgard <mans@mansr.com>
Justin Ruggles [Sun, 7 Aug 2011 21:12:49 +0000 (17:12 -0400)]
ac3enc: clip coupling coordinates during calculation
This is faster than using the clip_coefficients() function. Also,
clipping the coordinates before determining reuse is better since it
will compare coordinates that are closer to their final encoded values.
Justin Ruggles [Wed, 10 Aug 2011 18:07:35 +0000 (14:07 -0400)]
Remove incorrect info in documentation of AVCodecContext.bits_per_raw_sample.
bits_per_raw_sample is used in video as well, where sample_fmt is not used.
Baptiste Coudurier [Tue, 9 Aug 2011 06:41:50 +0000 (23:41 -0700)]
lavc: fix parentheses placement in avcodec_open2().
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Anton Khirnov [Wed, 10 Aug 2011 07:50:00 +0000 (09:50 +0200)]
lavc: make avcodec_init() static on next bump.
It's called from avcodec_register() anyway, so there's no reason for it
to be public.
Justin Ruggles [Sun, 7 Aug 2011 21:09:47 +0000 (17:09 -0400)]
ac3enc: remove unneeded #include
Justin Ruggles [Fri, 5 Aug 2011 21:34:53 +0000 (17:34 -0400)]
ac3enc: restructure coupling coordinate reuse calculation
Justin Ruggles [Fri, 5 Aug 2011 20:28:39 +0000 (16:28 -0400)]
ac3enc: allow new coupling coordinates to be sent independently for each
channel.
Justin Ruggles [Fri, 5 Aug 2011 20:00:18 +0000 (16:00 -0400)]
ac3enc: separate exponent bit counting from exponent grouping.
Move bit counting to the bit allocation function. Move exponent grouping to
after bit allocation. This will allow for adjustment of bandwidth parameters
during bit allocation without having to do exponent grouping multiple times.
Dustin Brody [Thu, 4 Aug 2011 21:47:16 +0000 (17:47 -0400)]
h264: propagate error return values for AV_LOG_ERROR-triggering events
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Alex Converse [Fri, 5 Aug 2011 19:40:51 +0000 (12:40 -0700)]
aac: Don't attempt to output configure an invalid channel configuration.
Anton Khirnov [Tue, 26 Jul 2011 19:56:56 +0000 (21:56 +0200)]
Rename ffserver to avserver.
Anton Khirnov [Tue, 26 Jul 2011 17:04:43 +0000 (19:04 +0200)]
Rename ffprobe to avprobe.
Anton Khirnov [Tue, 26 Jul 2011 15:51:34 +0000 (17:51 +0200)]
Rename ffplay to avplay.
Kostya Shishkov [Tue, 9 Aug 2011 09:19:55 +0000 (11:19 +0200)]
Pretty-print RV3/4 decoder source
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Kostya Shishkov [Thu, 4 Aug 2011 19:00:12 +0000 (21:00 +0200)]
Saner RV1/2 initialisation and RV2 header parsing.
Old version was based on lots of guesswork which had different hacks based on
32-bit version field instead of splitting it into major/minor/micro version.
RV2 picture header parser also had a few places where it deviated from binary
decoder.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Baptiste Coudurier [Sun, 30 Jan 2011 01:05:42 +0000 (17:05 -0800)]
libx264: do not set pic quality if no frame is output
Avoids uninitialized reads.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Baptiste Coudurier [Sat, 16 Apr 2011 23:50:50 +0000 (16:50 -0700)]
libx264: add preset, tune, profile and fastfirstpass private options
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Dustin Brody [Sat, 6 Aug 2011 00:38:46 +0000 (20:38 -0400)]
lavc: fix misspelling in comment
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Dustin Brody [Fri, 5 Aug 2011 02:32:09 +0000 (22:32 -0400)]
aac: propagate error return values for AV_LOG_ERROR-triggering events
Stefano Sabatini [Thu, 4 Aug 2011 15:53:44 +0000 (17:53 +0200)]
lsws: remove optimization debug logs in sws_init_context()
The logged information is possibly false, and it tends to be outdated
after each change since the logging code needs to be manually updated.
Simplify and prevent confusing wrong debug messages.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Stefano Sabatini [Wed, 3 Aug 2011 23:34:49 +0000 (01:34 +0200)]
lsws: use array for storing the supported in/out information
Also remove the unnecessary isSupportedIn/Out macros.
Make the code more compact/readable, and simplify the access to
lsws-specific pixel format information.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Luca Barbato [Wed, 3 Aug 2011 23:06:58 +0000 (01:06 +0200)]
applehttp: fix variant discard logic
The v->ctx is always not NULL now, check for streams presence to
mark the read_header state.
Fixes bug #25, possibly introduced by
603b8bc
Alex Converse [Thu, 4 Aug 2011 00:31:11 +0000 (17:31 -0700)]
h263dec: Fix asserts broken by the elimination of FF_COMMON_FRAME.
Diego Biurrun [Wed, 3 Aug 2011 21:28:26 +0000 (23:28 +0200)]
cosmetics: remove some stray comments from AVCodec declarations
Diego Biurrun [Wed, 3 Aug 2011 21:27:50 +0000 (23:27 +0200)]
cosmetics: fix indentation/alignment in AVCodec declarations
Måns Rullgård [Mon, 1 Aug 2011 17:21:04 +0000 (20:21 +0300)]
arm: Avoid using the movw instruction needlessly
This fixes building for ARM11 without Thumb2.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 1 Aug 2011 14:18:13 +0000 (17:18 +0300)]
Move an int64_t down in MpegEncContext
This allows using the same arm assembler offsets for both EABI
and the mach-o ABI.
Signed-off-by: Martin Storsjö <martin@martin.st>
Ronald S. Bultje [Tue, 2 Aug 2011 19:27:43 +0000 (12:27 -0700)]
Revert "swscale: use 15-bit intermediates for 9/10-bit scaling."
This reverts commit
ac0fb5934893be554a44d2a1eb7a3bc7bf39da4a. It
causes valgrind errors which I'll want to investigate before
resubmitting this.
Ronald S. Bultje [Tue, 2 Aug 2011 04:04:19 +0000 (21:04 -0700)]
swscale: use 15-bit intermediates for 9/10-bit scaling.
Vitor Sessak [Sat, 30 Jul 2011 16:39:25 +0000 (18:39 +0200)]
dct32: Add SSE2 ASM optimizations
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Kostya Shishkov [Tue, 2 Aug 2011 11:45:28 +0000 (13:45 +0200)]
Correct chroma vector calculation for RealVideo 3.
Old version divided it wrong, which resulted in chroma drift (visible on FATE
sample too as dirty trails left by clouds).
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Zohar Kelrich [Sun, 24 Jul 2011 14:28:33 +0000 (17:28 +0300)]
lavf: Add an option to discard corrupted frames
Signed-off-by: Zohar Kelrich <lumimies@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Zohar Kelrich [Sun, 24 Jul 2011 08:13:51 +0000 (11:13 +0300)]
mpegts: Mark wrongly-sized packets as corrupted
Signed-off-by: Zohar Kelrich <lumimies@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>