OSDN Git Service
David S. Miller [Thu, 10 May 2012 18:00:46 +0000 (11:00 -0700)]
sparc64: Do not clobber %g2 in xcall_fetch_glob_regs().
%g2 is meant to hold the CPUID number throughout this routine, since
at the very beginning, and at the very end, we use %g2 to calculate
indexes into per-cpu arrays.
However we erroneously clobber it in order to hold the %cwp register
value mid-stream.
Fix this code to use %g3 for the %cwp read and related calulcations
instead.
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 10 May 2012 17:05:19 +0000 (10:05 -0700)]
Merge tag 'nfs-for-3.4-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull a NFS client bugfix from Trond Myklebust:
"Fix for the NFSv4 security negotiation: ensure that the security
negotiation tries all registered security flavours"
* tag 'nfs-for-3.4-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
auth_gss: the list of pseudoflavors not being parsed correctly
Linus Torvalds [Thu, 10 May 2012 16:26:58 +0000 (09:26 -0700)]
Merge tag 'sound-3.4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly more than expected as rc7, but all are reasonablly small
fixes. A few additions of HD-audio fixup entries, a couple of other
regression fixes including a revert, and a few other trivial
oneliners."
* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: sh: fix migor.c compilation
ALSA: HDA: Lessen CPU usage when waiting for chip to respond
Revert "ALSA: hda - Set codec to D3 forcibly even if not used"
ALSA: hda/realtek - Call alc_auto_parse_customize_define() always after fixup
ALSA: hdsp - Provide ioctl_compat
ALSA: hda/realtek - Add missing CD-input pin for MSI-7350 mobo
ALSA: hda/realtek - Add a fixup for Acer Aspire 5739G
ALSA: echoaudio: Remove incorrect part of assertion
Jan Kiszka [Thu, 10 May 2012 13:04:36 +0000 (10:04 -0300)]
compat: Fix RT signal mask corruption via sigprocmask
compat_sys_sigprocmask reads a smaller signal mask from userspace than
sigprogmask accepts for setting. So the high word of blocked.sig[0]
will be cleared, releasing any potentially blocked RT signal.
This was discovered via userspace code that relies on get/setcontext.
glibc's i386 versions of those functions use sigprogmask instead of
rt_sigprogmask to save/restore signal mask and caused RT signal
unblocking this way.
As suggested by Linus, this replaces the sys_sigprocmask based compat
version with one that open-codes the required logic, including the merge
of the existing blocked set with the new one provided on SIG_SETMASK.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 9 May 2012 18:27:00 +0000 (11:27 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM: SoC fixes from Olof Johansson:
"Things have slowed down a lot for us, but we have five more fixes for
omap and kirkwood below. Three are for boards setup issues, two are
SoC-level fixes."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP: igep0020: fix smsc911x dummy regulator id
ARM: orion5x: Fix GPIO enable bits for MPP9
ARM: kirkwood: add missing kexec.h include
ARM: OMAP: Revert "ARM: OMAP: ctrl: Fix CONTROL_DSIPHY register fields"
ARM: OMAP1: Amstrad Delta: Fix wrong IRQ base in FIQ handler
Linus Torvalds [Wed, 9 May 2012 18:25:45 +0000 (11:25 -0700)]
Merge tag 'regmap-3.4' of git://git./linux/kernel/git/broonie/regmap
Pull last minute regman bug fix from Mark Brown:
"This is a last minute bug fix that was only just noticed since the
code path that's being exercised here is one that is fairly rarely
used. The changelog for the change itself is extremely clear and the
code itself is obvious to inspection so should be pretty safe."
* tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix possible memory corruption in regmap_bulk_read()
Linus Torvalds [Wed, 9 May 2012 18:14:13 +0000 (11:14 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Avi Kivity:
"Two asynchronous page fault fixes (one guest, one host), a powerpc
page refcount fix, and an ia64 build fix."
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: ia64: fix build due to typo
KVM: PPC: Book3S HV: Fix refcounting of hugepages
KVM: Do not take reference to mm during async #PF
KVM: ensure async PF event wakes up vcpu from halt
Linus Torvalds [Wed, 9 May 2012 18:07:29 +0000 (11:07 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
Pull powerpc fixes from Benjamin Herrenschmidt:
"Here are a couple of last minute fixes for 3.4 for regressions
introduced by my rewrite of the lazy irq masking code."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/irq: Make alignment & program interrupt behave the same
powerpc/irq: Fix bug with new lazy IRQ handling code
Olof Johansson [Wed, 9 May 2012 16:03:34 +0000 (09:03 -0700)]
Merge tag 'omap-fixes-for-v3.4-rc6-take-2' of git://git./linux/kernel/git/tmlind/linux-omap into fixes
Fix two board spefific regressions and one regression caused by bad documentation
By Archit Taneja (1) and others
via Tony Lindgren
* tag 'omap-fixes-for-v3.4-rc6-take-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: igep0020: fix smsc911x dummy regulator id
ARM: OMAP: Revert "ARM: OMAP: ctrl: Fix CONTROL_DSIPHY register fields"
ARM: OMAP1: Amstrad Delta: Fix wrong IRQ base in FIQ handler
Enrico Butera [Wed, 9 May 2012 09:27:59 +0000 (11:27 +0200)]
ARM: OMAP: igep0020: fix smsc911x dummy regulator id
id 0 is already used and causes errors at boot:
WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0x9c/0xac()
sysfs: cannot create duplicate filename '/devices/platform/reg-fixed-voltage.0'
Fix it by using the next available one (id=1).
This was caused by
5b3689f4 (ARM: OMAP2+: smsc911x: Add fixed
board regulators) that did not account for some regulators
already being used.
Signed-off-by: Enrico Butera <ebutera@users.berlios.de>
[tony@atomide.com: updated comments for regression causing commit]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Laxman Dewangan [Wed, 9 May 2012 12:13:12 +0000 (17:43 +0530)]
regmap: fix possible memory corruption in regmap_bulk_read()
The function regmap_bulk_read() calls the regmap_read() for
each register if set of register has volatile and cache is
enabled. In this case, last few register read makes the memory
corruption if the register size is not the size of unsigned int.
The regam_read() takes argument as unsigned int for returning
value and it update the value as
*val = map->format.parse_val(map->work_buf);
This causes complete 4 bytes (size of unsigned int) to get written.
Now if client pass the memory pointer for value which is equal to the
required size of register count in regmap_bulk_read() then last few
register read actually update the memory beyond passed pointer size.
Avoid this by using local variable for read and then do memcpy()
for actual byte copy to passed pointer based on register size.
I allocated one pointer ptr and take first 16 bytes dump of that
pointer then call regmap_bulk_read() with pointer which is just
on top of this allocated pointer and register count of 128. Here
register size is 1 byte.
The memory trace of last 5 register read are as follows:
[ 5.438589] regmap_bulk_read after regamp_read() for register 122
[ 5.447421] 0xef993c20 0xef993c00 0x00000000 0x00000001
[ 5.467535] regmap_bulk_read after regamp_read() for register 123
[ 5.476374] 0xef993c20 0xef993c00 0x00000000 0x00000001
[ 5.496425] regmap_bulk_read after regamp_read() for register 124
[ 5.505260] 0xef993c20 0xef993c00 0x00000000 0x00000001
[ 5.525372] regmap_bulk_read after regamp_read() for register 125
[ 5.534205] 0xef993c00 0xef993c00 0x00000000 0x00000001
[ 5.554258] regmap_bulk_read after regamp_read() for register 126
[ 5.563100] 0xef990000 0xef993c00 0x00000000 0x00000001
[ 5.554258] regmap_bulk_read after regamp_read() for register 127
[ 5.587108] 0xef000000 0xef993c00 0x00000000 0x00000001
Here it is observed that the memory content at first word started changing
on last 3 regmap_read() and so corruption happened.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Takashi Iwai [Wed, 9 May 2012 12:03:29 +0000 (14:03 +0200)]
Merge tag 'asoc-3.4' of git://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Build fix for SH in 3.4
An API update which wasn't sufficiently thorough in updating the tree...
Guennadi Liakhovetski [Wed, 9 May 2012 10:57:05 +0000 (12:57 +0200)]
ASoC: sh: fix migor.c compilation
Fix a recent compilation breakage, caused by a change in SH clock API.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Avi Kivity [Wed, 18 Apr 2012 16:23:50 +0000 (19:23 +0300)]
KVM: ia64: fix build due to typo
s/kcm/kvm/.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
David Henningsson [Fri, 4 May 2012 09:05:55 +0000 (11:05 +0200)]
ALSA: HDA: Lessen CPU usage when waiting for chip to respond
When an IRQ for some reason gets lost, we wait up to a second using
udelay, which is CPU intensive. This patch improves the situation by
waiting about 30 ms in the CPU intensive mode, then stepping down to
using msleep(2) instead. In essence, we trade some granularity in
exchange for less CPU consumption when the waiting time is a bit longer.
As a result, PulseAudio should no longer be killed by the kernel
for taking up to much RT-prio CPU time. At least not for *this* reason.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Tested-by: Arun Raghavan <arun.raghavan@collabora.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Olof Johansson [Wed, 9 May 2012 06:55:17 +0000 (23:55 -0700)]
Merge branch 'kirkwood_fixes_for_v3.4' of git://git.infradead.org/users/jcooper/linux-kirkwood into fixes
By Ben Hutchings (1) and Ian Campbell (1)
via Jason Cooper: "ARM: kirkwood: fixes for v3.4"
* 'kirkwood_fixes_for_v3.4' of git://git.infradead.org/users/jcooper/linux-kirkwood:
ARM: orion5x: Fix GPIO enable bits for MPP9
ARM: kirkwood: add missing kexec.h include
Benjamin Herrenschmidt [Tue, 8 May 2012 03:38:50 +0000 (13:38 +1000)]
powerpc/irq: Make alignment & program interrupt behave the same
Alignment was the last user of the ENABLE_INTS macro, which we can
now remove. All non-syscall exceptions now disable interrupts on
entry, they get re-enabled conditionally from C code. Don't
unconditionally re-enable in program check either, check the
original context.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 8 May 2012 03:31:59 +0000 (13:31 +1000)]
powerpc/irq: Fix bug with new lazy IRQ handling code
We had a case where we could turn on hard interrupts while
leaving the PACA_IRQ_HARD_DIS bit set in the PACA. This can
in turn cause a BUG_ON() to hit in __check_irq_replay() due
to interrupt state getting out of sync.
The assembly code was also way too convoluted. Instead, we
now leave it to the C code to do the right thing which ends
up being smaller and more readable.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Ben Hutchings [Sun, 8 Apr 2012 04:18:53 +0000 (05:18 +0100)]
ARM: orion5x: Fix GPIO enable bits for MPP9
Commit
554cdaefd1cf7bb54b209c4e68c7cec87ce442a9 ('ARM: orion5x: Refactor
mpp code to use common orion platform mpp.') seems to have accidentally
inverted the GPIO valid bits for MPP9 (only). For the mv2120 platform
which uses MPP9 as a GPIO LED device, this results in the error:
[ 12.711476] leds-gpio: probe of leds-gpio failed with error -22
Reported-by: Henry von Tresckow <hvontres@gmail.com>
References: http://bugs.debian.org/667446
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org [v3.0+]
Tested-by: Hans Henry von Tresckow <hvontres@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Linus Torvalds [Tue, 8 May 2012 18:49:30 +0000 (11:49 -0700)]
Merge tag 'regulator-3.4' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"One small fix for an edge condition in the max8997 driver and a fix
for a surprise in the devres API which caused devm_regulator_put() to
not actually put the regulator - a nicer version of this based on an
improvement of the devres API is queued for 3.5."
* tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Actually free the regulator in devm_regulator_put()
regulator: Fix the logic to ensure new voltage setting in valid range
Ian Campbell [Sun, 29 Apr 2012 13:40:42 +0000 (14:40 +0100)]
ARM: kirkwood: add missing kexec.h include
Fixes the following build error when CONFIG_KEXEC is enabled:
CC arch/arm/mach-kirkwood/board-dt.o
arch/arm/mach-kirkwood/board-dt.c: In function 'kirkwood_dt_init':
arch/arm/mach-kirkwood/board-dt.c:52:2: error: 'kexec_reinit' undeclared (first use in this function)
arch/arm/mach-kirkwood/board-dt.c:52:2: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
[v4, rebase onto recent Linus for repost]
[v3, speak actual English in the commit message, thanks Sergei Shtylyov]
[v2, using linux/kexec.h not asm/kexec.h]
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Linus Torvalds [Tue, 8 May 2012 18:20:47 +0000 (11:20 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Two fixes from Intel, one a regression, one because I merged an early
version of a fix.
Also the nouveau revert of the i2c code that was tested on the list."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/i2c: resume use of i2c-algo-bit, rather than custom stack
drm/i915: Do no set Stencil Cache eviction LRA w/a on gen7+
drm/i915: disable sdvo hotplug on i945g/gm
Linus Torvalds [Tue, 8 May 2012 18:07:29 +0000 (11:07 -0700)]
Merge tag 'stable/for-linus-3.4-rc6-tag' of git://git./linux/kernel/git/konrad/xen
Pull xen fixes from Konrad Rzeszutek Wilk:
- fix to Kconfig to make it fit within 80 line characters,
- two bootup fixes (AMD 8-core and with PCI BIOS),
- cleanup code in a Xen PV fb driver,
- and a crash fix when trying to see non-existent PTE's
* tag 'stable/for-linus-3.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/Kconfig: fix Kconfig layout
xen/pci: don't use PCI BIOS service for configuration space accesses
xen/pte: Fix crashes when trying to see non-existent PGD/PMD/PUD/PTEs
xen/apic: Return the APIC ID (and version) for CPU 0.
drivers/video/xen-fbfront.c: add missing cleanup code
Linus Torvalds [Tue, 8 May 2012 18:06:07 +0000 (11:06 -0700)]
Merge branch 'for-3.4-fixes' of git://git./linux/kernel/git/tj/percpu
Pull two percpu fixes from Tejun Heo:
"One adds missing KERN_CONT on split printk()s and the other makes
the percpu allocator avoid using PMD_SIZE as atom_size on x86_32.
Using PMD_SIZE led to vmalloc area exhaustion on certain
configurations (x86_32 android) and the only cost of using PAGE_SIZE
instead is static percpu area not being aligned to large page
mapping."
* 'for-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu, x86: don't use PMD_SIZE as embedded atom_size on 32bit
percpu: use KERN_CONT in pcpu_dump_alloc_info()
Linus Torvalds [Tue, 8 May 2012 18:05:05 +0000 (11:05 -0700)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
"This is mainly audit fixes, found by folks who happened to enable this
feature and then found it broke their user applications."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7414/1: SMP: prevent use of the console when using idmap_pgd
ARM: 7412/1: audit: use only AUDIT_ARCH_ARM regardless of endianness
ARM: 7411/1: audit: fix treatment of saved ip register during syscall tracing
ARM: 7410/1: Add extra clobber registers for assembly in kernel_execve
Tejun Heo [Fri, 27 Apr 2012 17:54:35 +0000 (10:54 -0700)]
percpu, x86: don't use PMD_SIZE as embedded atom_size on 32bit
With the embed percpu first chunk allocator, x86 uses either PAGE_SIZE
or PMD_SIZE for atom_size. PMD_SIZE is used when CPU supports PSE so
that percpu areas are aligned to PMD mappings and possibly allow using
PMD mappings in vmalloc areas in the future. Using larger atom_size
doesn't waste actual memory; however, it does require larger vmalloc
space allocation later on for !first chunks.
With reasonably sized vmalloc area, PMD_SIZE shouldn't be a problem
but x86_32 at this point is anything but reasonable in terms of
address space and using larger atom_size reportedly leads to frequent
percpu allocation failures on certain setups.
As there is no reason to not use PMD_SIZE on x86_64 as vmalloc space
is aplenty and most x86_64 configurations support PSE, fix the issue
by always using PMD_SIZE on x86_64 and PAGE_SIZE on x86_32.
v2: drop cpu_has_pse test and make x86_64 always use PMD_SIZE and
x86_32 PAGE_SIZE as suggested by hpa.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Yanmin Zhang <yanmin.zhang@intel.com>
Reported-by: ShuoX Liu <shuox.liu@intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <
4F97BA98.
6010001@intel.com>
Cc: stable@vger.kernel.org
David Gibson [Tue, 8 May 2012 10:24:08 +0000 (20:24 +1000)]
KVM: PPC: Book3S HV: Fix refcounting of hugepages
The H_REGISTER_VPA hcall implementation in HV Power KVM needs to pin some
guest memory pages into host memory so that they can be safely accessed
from usermode. It does this used get_user_pages_fast(). When the VPA is
unregistered, or the VCPUs are cleaned up, these pages are released using
put_page().
However, the get_user_pages() is invoked on the specific memory are of the
VPA which could lie within hugepages. In case the pinned page is huge,
we explicitly find the head page of the compound page before calling
put_page() on it.
At least with the latest kernel, this is not correct. put_page() already
handles finding the correct head page of a compound, and also deals with
various counts on the individual tail page which are important for
transparent huge pages. We don't support transparent hugepages on Power,
but even so, bypassing this count maintenance can lead (when the VM ends)
to a hugepage being released back to the pool with a non-zero mapcount on
one of the tail pages. This can then lead to a bad_page() when the page
is released from the hugepage pool.
This removes the explicit compound_head() call to correct this bug.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Takashi Iwai [Tue, 8 May 2012 14:30:59 +0000 (16:30 +0200)]
Revert "ALSA: hda - Set codec to D3 forcibly even if not used"
This reverts commit
785f857d1cb0856b612b46a0545b74aa2596e44a.
The commit causes a problem with the wrong D3 state after suspend
because the call of hda_set_power_state() involves with the power-up
sequence, which changes the power_count, and this confuses the resume
sequence that checks the power_count as well.
Originally, this go-to-D3 sequence should be a simple task without the
power-up sequence. But, it'd need some proper sanity checks in the
case of power-saved state, so it's not too easy to write now in the
3.4-rc cycle.
In short, the safest option now is to revert this affecting commit.
Of course, we need to clean up and robustify the power-saving code
better for 3.5 kernel.
Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 7 May 2012 16:09:48 +0000 (18:09 +0200)]
ALSA: hda/realtek - Call alc_auto_parse_customize_define() always after fixup
The call for alc_auto_parse_customize_define() must be done after the
fixup pre-probe initialization. Otherwise SKU_IGNORE fixup won't work
properly (e.g. HP RP5800 with ALC662 codec).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Andre Schramm [Mon, 7 May 2012 16:52:51 +0000 (18:52 +0200)]
ALSA: hdsp - Provide ioctl_compat
snd_hdsp uses its own ioctls to acquire config- and status information.
Expose the corresponding ioctl handler via ioctl_compat, so that 32bit applications can use it on 64bit kernels.
Signed-off-by: Andre Schramm <andre.schramm@iosono-sound.com>
Reviewed-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Andrew Morton [Fri, 4 May 2012 21:04:12 +0000 (14:04 -0700)]
xen/Kconfig: fix Kconfig layout
Fit it into 80 columns so that it is readable in menuconfig.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
David Vrabel [Fri, 4 May 2012 13:29:46 +0000 (14:29 +0100)]
xen/pci: don't use PCI BIOS service for configuration space accesses
The accessing PCI configuration space with the PCI BIOS32 service does
not work in PV guests.
On systems without MMCONFIG or where the BIOS hasn't marked the
MMCONFIG region as reserved in the e820 map, the BIOS service is
probed (even though direct access is preferred) and this hangs.
CC: stable@kernel.org
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[v1: Fixed compile error when CONFIG_PCI is not set]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Thu, 3 May 2012 20:14:14 +0000 (16:14 -0400)]
xen/pte: Fix crashes when trying to see non-existent PGD/PMD/PUD/PTEs
If I try to do "cat /sys/kernel/debug/kernel_page_tables"
I end up with:
BUG: unable to handle kernel paging request at
ffffc7fffffff000
IP: [<
ffffffff8106aa51>] ptdump_show+0x221/0x480
PGD 0
Oops: 0000 [#1] SMP
CPU 0
.. snip..
RAX:
0000000000000000 RBX:
ffffc00000000fff RCX:
0000000000000000
RDX:
0000800000000000 RSI:
0000000000000000 RDI:
ffffc7fffffff000
which is due to the fact we are trying to access a PFN that is not
accessible to us. The reason (at least in this case) was that
PGD[256] is set to __HYPERVISOR_VIRT_START which was setup (by the
hypervisor) to point to a read-only linear map of the MFN->PFN array.
During our parsing we would get the MFN (a valid one), try to look
it up in the MFN->PFN tree and find it invalid and return ~0 as PFN.
Then pte_mfn_to_pfn would happilly feed that in, attach the flags
and return it back to the caller. 'ptdump_show' bitshifts it and
gets and invalid value that it tries to dereference.
Instead of doing all of that, we detect the ~0 case and just
return !_PAGE_PRESENT.
This bug has been in existence .. at least until 2.6.37 (yikes!)
CC: stable@kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Wed, 2 May 2012 19:04:51 +0000 (15:04 -0400)]
xen/apic: Return the APIC ID (and version) for CPU 0.
On x86_64 on AMD machines where the first APIC_ID is not zero, we get:
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
BIOS bug: APIC version is 0 for CPU 1/0x10, fixing up to 0x10
BIOS bug: APIC version mismatch, boot CPU: 0, CPU 1: version 10
which means that when the ACPI processor driver loads and
tries to parse the _Pxx states it fails to do as, as it
ends up calling acpi_get_cpuid which does this:
for_each_possible_cpu(i) {
if (cpu_physical_id(i) == apic_id)
return i;
}
And the bootup CPU, has not been found so it fails and returns -1
for the first CPU - which then subsequently in the loop that
"acpi_processor_get_info" does results in returning an error, which
means that "acpi_processor_add" failing and per_cpu(processor)
is never set (and is NULL).
That means that when xen-acpi-processor tries to load (much much
later on) and parse the P-states it gets -ENODEV from
acpi_processor_register_performance() (which tries to read
the per_cpu(processor)) and fails to parse the data.
Reported-by-and-Tested-by: Stefan Bader <stefan.bader@canonical.com>
Suggested-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
[v2: Bit-shift APIC ID by 24 bits]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Mark Brown [Mon, 7 May 2012 10:34:52 +0000 (11:34 +0100)]
regulator: Actually free the regulator in devm_regulator_put()
It turns out that (quite surprisingly) devres_destroy() only undoes the
devres mapping, it doesn't destroy the underlying resource, meaning that
anything using devm_regulator_put() would leak. While we wait for the new
devres_release() which does what we want to get merged open code it in
devm_regulator_put().
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Julia Lawall [Sun, 22 Apr 2012 09:57:40 +0000 (11:57 +0200)]
drivers/video/xen-fbfront.c: add missing cleanup code
The operations in the subsequent error-handling code appear to be also
useful here.
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
[v1: Collapse some of the error handling functions]
[v2: Fix compile warning]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Ben Skeggs [Fri, 4 May 2012 04:38:49 +0000 (14:38 +1000)]
drm/nouveau/i2c: resume use of i2c-algo-bit, rather than custom stack
Previous issues with i2c-algo-bit have now been resolved.
This is a revert of
f553b79c03f0dbd52f6f03abe8233a2bef8cbd0d mostly,
due to fixes in the i2c core repairing the original issue, this code
isn't required and was causing regressions.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reported-by: Nick Bowler <nbowler@elliptictech.com>
Tested-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 7 May 2012 10:00:31 +0000 (11:00 +0100)]
Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Daniel wrote:
2 little patches:
- One regression fix to disable sdvo hotplug on broken hw.
- One patch to upconvert the snb hang workaround from patch v1 to patch
v2.
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: Do no set Stencil Cache eviction LRA w/a on gen7+
drm/i915: disable sdvo hotplug on i945g/gm
Takashi Iwai [Mon, 7 May 2012 09:13:14 +0000 (11:13 +0200)]
ALSA: hda/realtek - Add missing CD-input pin for MSI-7350 mobo
Reported-by: Philipp Matthias Hahn <pmhahn@pmhahn.de>
Cc: <stable@kernel.org> [v3.3+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Daniel Vetter [Sun, 6 May 2012 14:50:24 +0000 (16:50 +0200)]
drm/i915: Do no set Stencil Cache eviction LRA w/a on gen7+
I've flagged this while reviewing the first version and Ken Graunke
fixed it up in v2, but unfortunately Dave Airlie picked up the wrong
version.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: stable@kernel.org
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 4 May 2012 09:29:56 +0000 (11:29 +0200)]
drm/i915: disable sdvo hotplug on i945g/gm
Chris Wilson dug out a hw erratum saying that there's noise on the
interrupt line on i945G chips. We also have a bug report from a i945GM
chip with an sdvo hotplug interrupt storm (and no apparent cause).
Play it safe and disable sdvo hotplug on all i945 variants.
Note that this is a regression that has been introduced in 3.1,
when we've enabled sdvo hotplug support with
commit
cc68c81aed7d892deaf12d720d5455208e94cd0a
Author: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Date: Wed Sep 21 17:13:30 2011 +0100
drm/i915: Enable SDVO hotplug interrupts for HDMI and DVI
Cc: stable@kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38442
Reported-and-tested-by: Dominik Köppl <dominik@devwork.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Takashi Iwai [Mon, 7 May 2012 08:07:33 +0000 (10:07 +0200)]
ALSA: hda/realtek - Add a fixup for Acer Aspire 5739G
Acer Aspire 5739G requires the same fix-up for 4930G to support the
surround / bass speakers.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43180
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Larry Finger [Mon, 7 May 2012 00:40:03 +0000 (19:40 -0500)]
IA32 emulation: Fix build problem for modular ia32 a.out support
Commit
ce7e5d2d19bc ("x86: fix broken TASK_SIZE for ia32_aout") breaks
kernel builds when "CONFIG_IA32_AOUT=m" with
ERROR: "set_personality_ia32" [arch/x86/ia32/ia32_aout.ko] undefined!
make[1]: *** [__modpost] Error 1
The entry point needs to be exported.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Al Viro <viro@zeniv.linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 6 May 2012 22:07:32 +0000 (15:07 -0700)]
Linux 3.4-rc6
Linus Torvalds [Sun, 6 May 2012 19:19:38 +0000 (12:19 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes form Peter Anvin
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND
arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver
x86, relocs: Remove an unused variable
asm-generic: Use __BITS_PER_LONG in statfs.h
x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it
Linus Torvalds [Sun, 6 May 2012 17:20:07 +0000 (10:20 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"The big ones here are a memory leak we introduced in rc1, and a
scheduling while atomic if the transid on disk doesn't match the
transid we expected. This happens for corrupt blocks, or out of date
disks.
It also fixes up the ioctl definition for our ioctl to resolve logical
inode numbers. The __u32 was a merging error and doesn't match what
we ship in the progs."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: avoid sleeping in verify_parent_transid while atomic
Btrfs: fix crash in scrub repair code when device is missing
btrfs: Fix mismatching struct members in ioctl.h
Btrfs: fix page leak when allocing extent buffers
Btrfs: Add properly locking around add_root_to_dirty_list
Al Viro [Sun, 6 May 2012 16:20:00 +0000 (17:20 +0100)]
x86: fix broken TASK_SIZE for ia32_aout
Setting TIF_IA32 in load_aout_binary() used to be enough; these days
TASK_SIZE is controlled by TIF_ADDR32 and that one doesn't get set
there. Switch to use of set_personality_ia32()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gleb Natapov [Wed, 2 May 2012 12:04:02 +0000 (15:04 +0300)]
KVM: Do not take reference to mm during async #PF
It turned to be totally unneeded. The reason the code was introduced is
so that KVM can prefault swapped in page, but prefault can fail even
if mm is pinned since page table can change anyway. KVM handles this
situation correctly though and does not inject spurious page faults.
Fixes:
"INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected" warning while
running LTP inside a KVM guest using the recent -next kernel.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Gleb Natapov [Thu, 3 May 2012 08:36:39 +0000 (11:36 +0300)]
KVM: ensure async PF event wakes up vcpu from halt
If vcpu executes hlt instruction while async PF is waiting to be delivered
vcpu can block and deliver async PF only after another even wakes it
up. This happens because kvm_check_async_pf_completion() will remove
completion event from vcpu->async_pf.done before entering kvm_vcpu_block()
and this will make kvm_arch_vcpu_runnable() return false. The solution
is to make vcpu runnable when processing completion.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Chris Mason [Sun, 6 May 2012 11:23:47 +0000 (07:23 -0400)]
Btrfs: avoid sleeping in verify_parent_transid while atomic
verify_parent_transid needs to lock the extent range to make
sure no IO is underway, and so it can safely clear the
uptodate bits if our checks fail.
But, a few callers are using it with spinlocks held. Most
of the time, the generation numbers are going to match, and
we don't want to switch to a blocking lock just for the error
case. This adds an atomic flag to verify_parent_transid,
and changes it to return EAGAIN if it needs to block to
properly verifiy things.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Mark Hills [Mon, 30 Apr 2012 18:39:22 +0000 (19:39 +0100)]
ALSA: echoaudio: Remove incorrect part of assertion
This assertion seems to imply that chip->dsp_code_to_load is a pointer.
It's actually an integer handle on the actual firmware, and 0 has no
special meaning.
The assertion prevents initialisation of a Darla20 card, but would also
affect other models. It seems it was introduced in commit
dd7b254d.
ALSA sound/pci/echoaudio/echoaudio.c:2061 Echoaudio driver starting...
ALSA sound/pci/echoaudio/echoaudio.c:1969 chip=
ebe4e000
ALSA sound/pci/echoaudio/echoaudio.c:2007 pci=
ed568000 irq=19 subdev=0010 Init hardware...
ALSA sound/pci/echoaudio/darla20_dsp.c:36 init_hw() - Darla20
------------[ cut here ]------------
WARNING: at sound/pci/echoaudio/echoaudio_dsp.c:478 init_hw+0x1d1/0x86c [snd_darla20]()
Hardware name: Dell DM051
BUG? (!chip->dsp_code_to_load || !chip->comm_page)
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Colin Cross [Sat, 5 May 2012 19:58:13 +0000 (20:58 +0100)]
ARM: 7414/1: SMP: prevent use of the console when using idmap_pgd
Commit
4e8ee7de227e3ab9a72040b448ad728c5428a042 (ARM: SMP: use
idmap_pgd for mapping MMU enable during secondary booting)
switched secondary boot to use idmap_pgd, which is initialized
during early_initcall, instead of a page table initialized during
__cpu_up. This causes idmap_pgd to contain the static mappings
but be missing all dynamic mappings.
If a console is registered that creates a dynamic mapping, the
printk in secondary_start_kernel will trigger a data abort on
the missing mapping before the exception handlers have been
initialized, leading to a hang. Initial boot is not affected
because no consoles have been registered, and resume is usually
not affected because the offending console is suspended.
Onlining a cpu with hotplug triggers the problem.
A workaround is to the printk in secondary_start_kernel until
after the page tables have been switched back to init_mm.
Cc: <stable@vger.kernel.org>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Sat, 5 May 2012 23:34:38 +0000 (16:34 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha
Pull alpha fixes from Matt Turner:
"My alpha tree is back up (after taking quite some time to get my GPG
key signed). It contains just some simple fixes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: silence 'const' warning in sys_marvel.c
alpha: include module.h to fix modpost on Tsunami
alpha: properly define get/set_rtc_time on Marvel/SMP
alpha: VGA_HOSE depends on VGA_CONSOLE
Jiri Slaby [Sat, 5 May 2012 20:49:10 +0000 (22:49 +0200)]
TTY: pdc_cons, fix regression in close
The test in pdc_console_tty_close '!tty->count' was always wrong
because tty->count is decremented after tty->ops->close is called and
thus can never be zero. Hence the 'then' branch was never executed and
the timer never deleted.
This did not matter until commit
5dd5bc40f3b6 ("TTY: pdc_cons, use
tty_port"). There we needed to set TTY in tty_port to NULL, but this
never happened due to the bug above.
So change the test to really trigger at the last close by changing the
condition to 'tty->count == 1'.
Well, the driver should not touch tty->count at all. It should use
tty_port->count and count open count there itself.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-and-tested-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 5 May 2012 17:07:06 +0000 (10:07 -0700)]
Merge tag 'sound-3.4' of git://git./linux/kernel/git/tiwai/sound
Pull sound sound fixes from Takashi Iwai:
"As good as nothing exciting here; just a few trivial fixes for various
ASoC stuff."
* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: omap-pcm: Free dma buffers in case of error.
ASoC: s3c2412-i2s: Fix dai registration
ASoC: wm8350: Don't use locally allocated codec struct
ASoC: tlv312aic23: unbreak resume
ASoC: bf5xx-ssm2602: Set DAI format
ASoC: core: check of_property_count_strings failure
ASoC: dt: sgtl5000.txt: Add description for 'reg' field
ASoC: wm_hubs: Make sure we don't disable differential line outputs
Linus Torvalds [Sat, 5 May 2012 17:06:06 +0000 (10:06 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux
Pull an ACPI patch from Len Brown:
"It fixes a D3 issue new in 3.4-rc1."
By Lin Ming via Len Brown:
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
ACPI: Fix D3hot v D3cold confusion
Sasha Levin [Sat, 5 May 2012 15:06:35 +0000 (17:06 +0200)]
init: don't try mounting device as nfs root unless type fully matches
Currently, we'll try mounting any device who's major device number is
UNNAMED_MAJOR as NFS root. This would happen for non-NFS devices as
well (such as 9p devices) but it wouldn't cause any issues since
mounting the device as NFS would fail quickly and the code proceeded to
doing the proper mount:
[ 101.522716] VFS: Unable to mount root fs via NFS, trying floppy.
[ 101.534499] VFS: Mounted root (9p filesystem) on device 0:18.
Commit
6829a048102a ("NFS: Retry mounting NFSROOT") introduced retries
when mounting NFS root, which means that now we don't immediately fail
and instead it takes an additional 90+ seconds until we stop retrying,
which has revealed the issue this patch fixes.
This meant that it would take an additional 90 seconds to boot when
we're not using a device type which gets detected in order before NFS.
This patch modifies the NFS type check to require device type to be
'Root_NFS' instead of requiring the device to have an UNNAMED_MAJOR
major. This makes boot process cleaner since we now won't go through
the NFS mounting code at all when the device isn't an NFS root
("/dev/nfs").
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Will Deacon [Fri, 4 May 2012 16:53:52 +0000 (17:53 +0100)]
ARM: 7412/1: audit: use only AUDIT_ARCH_ARM regardless of endianness
The machine endianness has no direct correspondence to the syscall ABI,
so use only AUDIT_ARCH_ARM when identifying the ABI to the audit tools
in userspace.
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Will Deacon [Fri, 4 May 2012 16:52:02 +0000 (17:52 +0100)]
ARM: 7411/1: audit: fix treatment of saved ip register during syscall tracing
The ARM audit code incorrectly uses the saved application ip register
value to infer syscall entry or exit. Additionally, the saved value will
be clobbered if the current task is not being traced, which can lead to
libc corruption if ip is live (apparently glibc uses it for the TLS
pointer).
This patch fixes the syscall tracing code so that the why parameter is
used to infer the syscall direction and the saved ip is only updated if
we know that we will be signalling a ptrace trap.
Reported-and-Tested-by: Jon Masters <jcm@jonmasters.org>
Cc: stable@vger.kernel.org
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tim Bird [Wed, 2 May 2012 21:55:39 +0000 (22:55 +0100)]
ARM: 7410/1: Add extra clobber registers for assembly in kernel_execve
The inline assembly in kernel_execve() uses r8 and r9. Since this
code sequence does not return, it usually doesn't matter if the
register clobber list is accurate. However, I saw a case where a
particular version of gcc used r8 as an intermediate for the value
eventually passed to r9. Because r8 is used in the inline
assembly, and not mentioned in the clobber list, r9 was set
to an incorrect value.
This resulted in a kernel panic on execution of the first user-space
program in the system. r9 is used in ret_to_user as the thread_info
pointer, and if it's wrong, bad things happen.
Cc: <stable@vger.kernel.org>
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Takashi Iwai [Sat, 5 May 2012 09:27:26 +0000 (11:27 +0200)]
Merge branch 'fix/asoc' into for-linus
Takashi Iwai [Sat, 5 May 2012 09:26:50 +0000 (11:26 +0200)]
Merge branch 'for-3.4' of git://git./linux/kernel/git/lrg/asoc into fix/asoc
Takashi Iwai [Sat, 5 May 2012 09:25:17 +0000 (11:25 +0200)]
Merge tag 'asoc-3.4' of git://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for 3.4
Nothing terribly exciting here, a bunch of small and simple fixes
scattered around the place.
Lin Ming [Mon, 23 Apr 2012 01:03:49 +0000 (09:03 +0800)]
ACPI: Fix D3hot v D3cold confusion
Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot
in some places, but D3cold in other places.
After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD;
and all references to D3hot use ACPI_STATE_D3_HOT.
ACPI's _PR3 method is used to enter both D3hot and D3cold states.
What distinguishes D3hot from D3cold is the presence _PR3
(Power Resources for D3hot) If these resources are all ON,
then the state is D3hot. If _PR3 is not present,
or all _PR0 resources for the devices are OFF,
then the state is D3cold.
This patch applies after Linux-3.4-rc1.
A future syntax cleanup may remove ACPI_STATE_D3
to emphasize that it always means ACPI_STATE_D3_COLD.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Aaron Lu <aaron.lu@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Greg Kroah-Hartman [Fri, 4 May 2012 19:09:39 +0000 (12:09 -0700)]
hfsplus: Fix potential buffer overflows
Commit
ec81aecb2966 ("hfs: fix a potential buffer overflow") fixed a few
potential buffer overflows in the hfs filesystem. But as Timo Warns
pointed out, these changes also need to be made on the hfsplus
filesystem as well.
Reported-by: Timo Warns <warns@pre-sense.de>
Acked-by: WANG Cong <amwang@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Sage Weil <sage@newdream.net>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: stable <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 4 May 2012 22:35:09 +0000 (15:35 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner.
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtc: Fix possible null pointer dereference in rtc-mpc5121.c
Linus Torvalds [Fri, 4 May 2012 22:34:21 +0000 (15:34 -0700)]
Merge git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French.
* git://git.samba.org/sfrench/cifs-2.6:
fs/cifs: fix parsing of dfs referrals
cifs: make sure we ignore the credentials= and cred= options
[CIFS] Update cifs version to 1.78
cifs - check S_AUTOMOUNT in revalidate
cifs: add missing initialization of server->req_lock
cifs: don't cap ra_pages at the same level as default_backing_dev_info
CIFS: Fix indentation in cifs_show_options
Dave Jones [Fri, 4 May 2012 16:04:17 +0000 (12:04 -0400)]
CPU frequency drivers MAINTAINERS update
Remove myself as cpufreq maintainer.
x86 driver changes can go through the regular x86/ACPI trees.
ARM driver changes through the ARM trees.
cpufreq core changes are rare these days, and can just go to lkml/direct.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 4 May 2012 22:13:54 +0000 (15:13 -0700)]
seqlock: add 'raw_seqcount_begin()' function
The normal read_seqcount_begin() function will wait for any current
writers to exit their critical region by looping until the sequence
count is even.
That "wait for sequence count to stabilize" is the right thing to do if
the read-locker will just retry the whole operation on contention: no
point in doing a potentially expensive reader sequence if we know at the
beginning that we'll just end up re-doing it all.
HOWEVER. Some users don't actually retry the operation, but instead
will abort and do the operation with proper locking. So the sequence
count case may be the optimistic quick case, but in the presense of
writers you may want to do full locking in order to guarantee forward
progress. The prime example of this would be the RCU name lookup.
And in that case, you may well be better off without the "retry early",
and are in a rush to instead get to the failure handling. Thus this
"raw" interface that just returns the sequence number without testing it
- it just forces the low bit to zero so that read_seqcount_retry() will
always fail such a "active concurrent writer" scenario.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 4 May 2012 21:46:02 +0000 (14:46 -0700)]
Fix __read_seqcount_begin() to use ACCESS_ONCE for sequence value read
We really need to use a ACCESS_ONCE() on the sequence value read in
__read_seqcount_begin(), because otherwise the compiler might end up
reloading the value in between the test and the return of it. As a
result, it might end up returning an odd value (which means that a write
is in progress).
If the reader is then fast enough that that odd value is still the
current one when the read_seqcount_retry() is done, we might end up with
a "successful" read sequence, even despite the concurrent write being
active.
In practice this probably never really happens - there just isn't
anything else going on around the read of the sequence count, and the
common case is that we end up having a read barrier immediately
afterwards.
So the code sequence in which gcc might decide to reaload from memory is
small, and there's no reason to believe it would ever actually do the
reload. But if the compiler ever were to decide to do so, it would be
incredibly annoying to debug. Let's just make sure.
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yong Wang [Fri, 4 May 2012 21:02:44 +0000 (14:02 -0700)]
intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND
So that the power button still wakes up the platform.
Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
Link: http://lkml.kernel.org/r/20120504210244.F2EA5A018B@akpm.mtv.corp.google.com
Tested-by: Kangkai Yin <kangkai.yin@intel.com>
Tested-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Bjarke Istrup Pedersen [Fri, 4 May 2012 21:01:45 +0000 (14:01 -0700)]
arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver
It seems that there was an error with the active_low = 1 for the
LED, since it should be set to 0 (meaning that active is high,
since 0 is false, hence the confusion.
The wiki article about it confuses it, since it contradicts itself,
regarding what turns on the LED.
I have tested 3.4-rc2 on my net5501 with this patch, and it makes the LED
behave correctly, where "none" turns it off, and "default-on" turns it on,
when echoed onto the trigger "file" in /sys/class/leds.
Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org>
Link: http://lkml.kernel.org/r/20120504210146.62186A018B@akpm.mtv.corp.google.com
Cc: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Archit Taneja [Thu, 19 Apr 2012 12:09:16 +0000 (17:39 +0530)]
ARM: OMAP: Revert "ARM: OMAP: ctrl: Fix CONTROL_DSIPHY register fields"
This reverts commit
46f8c3c7e95c0d30d95911e7975ddc4f93b3e237.
The commit above swapped the DSI1_PPID and DSI2_PPID register fields in
CONTROL_DSIPHY to be in sync with the newer public OMAP TRMs(after version V).
With this commit, contention errors were reported on DSI lanes some OMAP4 SDPs.
After probing the DSI lanes on OMAP4 SDP, it was seen that setting bits in the
DSI2_PPID field was pulling up voltage on DSI1 lanes, and DSI1_PPID field was
pulling up voltage on DSI2 lanes.
This proves that the current version of OMAP4 TRM is incorrect, swap the
position of register fields according to the older TRM versions as they were
correct.
Cc: stable@vger.kernel.org # v3.2+
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Stefan Behrens [Fri, 4 May 2012 19:16:07 +0000 (15:16 -0400)]
Btrfs: fix crash in scrub repair code when device is missing
Fix that when scrub tries to repair an I/O or checksum error and one of
the devices containing the mirror is missing, it crashes in bio_add_page
because the bdev is a NULL pointer for missing devices.
Reported-by: Marco L. Crociani <marco.crociani@gmail.com>
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Alexander Block [Fri, 4 May 2012 19:16:06 +0000 (15:16 -0400)]
btrfs: Fix mismatching struct members in ioctl.h
Fix the size members of btrfs_ioctl_ino_path_args and
btrfs_ioctl_logical_ino_args. The user space btrfs-progs utilities used
__u64 and the kernel headers used __u32 before.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik [Fri, 4 May 2012 19:16:06 +0000 (15:16 -0400)]
Btrfs: fix page leak when allocing extent buffers
If we happen to alloc a extent buffer and then alloc a page and notice that
page is already attached to an extent buffer, we will only unlock it and
free our existing eb. Any pages currently attached to that eb will be
properly freed, but we don't do the page_cache_release() on the page where
we noticed the other extent buffer which can cause us to leak pages and I
hope cause the weird issues we've been seeing in this area. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 3 May 2012 16:08:48 +0000 (12:08 -0400)]
Btrfs: Add properly locking around add_root_to_dirty_list
add_root_to_dirty_list happens once at the very beginning of the
transaction, but it is still racey.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Janusz Krzysztofik [Mon, 30 Apr 2012 17:26:09 +0000 (19:26 +0200)]
ARM: OMAP1: Amstrad Delta: Fix wrong IRQ base in FIQ handler
Commit
384ebe1c2849160d040df3e68634ec506f13d9ff, "gpio/omap: Add DT
support to GPIO driver", introduced dynamic IRQ numbering of OMAP GPIO
interrupts, breaking all IH_GPIO_BASE based IRQ number calculations.
This issue was corrected in the OMAP GPIO driver and the related header
file with commit
25db711df3258d125dc1209800317e5c0ef3c870, "gpio/omap:
Fix IRQ handling for SPARSE_IRQ".
However, the Amstrad Delta FIQ handler, which replaces the gpio-omap
driver in serving GPIO interrupts on this board, still uses that
outdated method. Fix it.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Linus Torvalds [Fri, 4 May 2012 14:57:13 +0000 (07:57 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Some minor fixes from Intel and a radeon fix.
I have the nouveau fix for the i2c regression queued for next week,
its mostly a revert and seems to work on the system it was originally
introduced for thanks to some i2c core changes."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: clarify and extend wb setup on APUs and NI+ asics
drm/i915: enable dip before writing data on gen4
fixing dmi match for hp t5745 and hp st5747 thin client
drm/i915: Only enable IPS polling for gen5
drm/i915: Do not read non-existent DPLL registers on PCH hardware
Linus Torvalds [Fri, 4 May 2012 14:56:22 +0000 (07:56 -0700)]
Merge tag 'md-3.4-fixes' of git://neil.brown.name/md
Pull one small fix for md/bitmaps from NeilBrown:
"This fixes a regression that was introduced in the merge window."
* tag 'md-3.4-fixes' of git://neil.brown.name/md:
md/bitmap: fix calculation of 'chunks' - missing shift.
Linus Torvalds [Fri, 4 May 2012 14:50:50 +0000 (07:50 -0700)]
Merge branch 'fix-unmapped-word-at-a-time'
Jana Saout confirmed that this fixes the page faults he saw.
His problem was triggered by ocfs2 and autofs symlink lookups, where the
symlink allocation was at the end of a page. But the deeper reason
seems to be the use of Xen-PV, which is what then causes him to have all
these unmapped pages, which is what then makes it a problem when the
unaligned word-at-a-time code fetches data past the end of a page.
* fix-unmapped-word-at-a-time:
vfs: make word-at-a-time accesses handle a non-existing page
Oleg Matcovschi [Wed, 25 Apr 2012 02:02:02 +0000 (19:02 -0700)]
ASoC: omap-pcm: Free dma buffers in case of error.
Signed-off-by: Oleg Matcovschi <oleg.matcovschi@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
Alex Deucher [Thu, 3 May 2012 21:06:28 +0000 (17:06 -0400)]
drm/radeon: clarify and extend wb setup on APUs and NI+ asics
Use family rather than DCE check for clarity, also always use
wb on APUs, there will never be AGP variants.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
NeilBrown [Fri, 4 May 2012 07:03:18 +0000 (17:03 +1000)]
md/bitmap: fix calculation of 'chunks' - missing shift.
commit
61a0d80c "md/bitmap: discard CHUNK_BLOCK_SHIFT macro"
replaced CHUNK_BLOCK_RATIO() by the same text that was
replacing CHUNK_BLOCK_SHIFT() - which is clearly wrong.
The result is that 'chunks' is often too small by 1,
which can sometimes result in a crash (not sure how).
So use the correct replacement, and get rid of CHUNK_BLOCK_RATIO
which is no longe used.
Reported-by: Karl Newman <siliconfiend@gmail.com>
Tested-by: Karl Newman <siliconfiend@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Stefan Metzmacher [Thu, 3 May 2012 22:19:28 +0000 (00:19 +0200)]
fs/cifs: fix parsing of dfs referrals
The problem was that the first referral was parsed more than once
and so the caller tried the same referrals multiple times.
The problem was introduced partly by commit
066ce6899484d9026acd6ba3a8dbbedb33d7ae1b,
where 'ref += le16_to_cpu(ref->Size);' got lost,
but that was also wrong...
Cc: <stable@vger.kernel.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Tested-by: Björn Jacke <bj@sernet.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Linus Torvalds [Fri, 4 May 2012 00:21:05 +0000 (17:21 -0700)]
Merge tag 'mfd-for-linus-3.4-rc6' of git://git./linux/kernel/git/sameo/mfd-2.6
Pull second set of MFD fixes from Samuel Ortiz:
"This time we only have a one liner fixing an omap-usb build error."
* tag 'mfd-for-linus-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
mfd: Fix build breakage in omap-usb-host.c
Linus Torvalds [Fri, 4 May 2012 00:19:48 +0000 (17:19 -0700)]
Merge branch 'efi-vars' from Matthew Garrett
* efi-vars:
efivars: Improve variable validation
Matthew Garrett [Thu, 3 May 2012 20:50:46 +0000 (16:50 -0400)]
efivars: Improve variable validation
Ben Hutchings pointed out that the validation in efivars was inadequate -
most obviously, an entry with size 0 would server as a DoS against the
kernel. Improve this based on his suggestions.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 4 May 2012 00:16:52 +0000 (17:16 -0700)]
Merge tag 'tag/upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
Pull libata fixes from Jeff Garzik:
1) Fix regression that could cause a misdiagnosis, which in turn could
lead to an erroneous 3.0 Gbps -> 1.5 downshift, particularly when hotplug
and suspend/resume is involved.
2) Fix a regression that led to ata%d controller ids being numbered one
larger than in <= 3.4-rc3 (oh, the horror!). Controller ids should now be
as expected.
3) add some DT, PCI id's
4) ata/pata_arasan_cf: minor cpp fixing/cleaning
* tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
ata: ahci_platform: Add synopsys ahci controller in DT's compatible list
ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
libata: init ata_print_id to 0
ahci: Detect Marvell 88SE9172 SATA controller
libata: skip old error history when counting probe trials
Linus Torvalds [Fri, 4 May 2012 00:15:47 +0000 (17:15 -0700)]
Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux
Pull i2c embedded fixes from Wolfram Sang:
"Here are some typical i2c driver bugfixes for 3.4. Missed clock
handling, improper timeout fixes, hardware wrokarounds... All
patches have been in linux-next for a few days, too."
* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
i2c: mxs: disable QUEUE when sending is done
i2c: mxs: handle spurious interrupt
i2c-eg20t: Modify MODULE_AUTHOR's email address
i2c-eg20t: change timeout value 50msec to 1000msec
i2c: tegra: Add delay before resetting the controller after NACK
i2c: pnx: Disable clk in suspend
Linus Torvalds [Fri, 4 May 2012 00:14:55 +0000 (17:14 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just some regression fixes from Ben along with a variable that gcc
failed to spot is uninitialised."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
nouveau: initialise has_optimus variable.
drm/nv10/gpio: fix thinko in mask for gpio lines 2-9
nvc0/fb: shut up PMFB interrupt after the first occurrence
drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvac
drm/nouveau/bios: fix regression on some nv4x board
Linus Torvalds [Fri, 4 May 2012 00:10:39 +0000 (17:10 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Transfer padding was wrong for full-speed USB in ASIX driver, fix
from Ingo van Lil.
2) Propagate the negative packet offset fix into the PowerPC BPF JIT.
From Jan Seiffert.
3) dl2k driver's private ioctls were letting unprivileged tasks make
MII writes and other ugly bits like that. Fix from Jeff Mahoney.
4) Fix TX VLAN and RX packet drops in ucc_geth, from Joakim Tjernlund.
5) OOPS and network namespace fixes in IPVS from Hans Schillstrom and
Julian Anastasov.
6) Fix races and sleeping in locked context bugs in drop_monitor, from
Neil Horman.
7) Fix link status indication in smsc95xx driver, from Paolo Pisati.
8) Fix bridge netfilter OOPS, from Peter Huang.
9) L2TP sendmsg can return on error conditions with the socket lock
held, oops. Fix from Sasha Levin.
10) udp_diag should return meaningful values for socket memory usage,
from Shan Wei.
11) Eric Dumazet is so awesome he gets his own section:
Socket memory cgroup code (I never should have applied those
patches, grumble...) made erroneous changes to
sk_sockets_allocated_read_positive(). It was changed to
use percpu_counter_sum_positive (which requires BH disabling)
instead of percpu_counter_read_positive (which does not).
Revert back to avoid crashes and lockdep warnings.
Adjust the default tcp_adv_win_scale and tcp_rmem[2] values
to fix throughput regressions. This is necessary as a result
of our more precise skb->truesize tracking.
Fix SKB leak in netem packet scheduler.
12) New device IDs for various bluetooth devices, from Manoj Iyer,
AceLan Kao, and Steven Harms.
13) Fix command completion race in ipw2200, from Stanislav Yakovlev.
14) Fix rtlwifi oops on unload, from Larry Finger.
15) Fix hard_mtu when adjusting hard_header_len in smsc95xx driver.
From Stephane Fillod.
16) ehea driver registers it's IRQ before all the necessary state is
setup, resulting in crashes. Fix from Thadeu Lima de Souza
Cascardo.
17) Fix PHY connection failures in davinci_emac driver, from Anatolij
Gustschin.
18) Missing break; in switch statement in bluetooth's
hci_cmd_complete_evt(). Fix from Szymon Janc.
19) Fix queue programming in iwlwifi, from Johannes Berg.
20) Interrupt throttling defaults not being actually programmed into the
hardware, fix from Jeff Kirsher and Ying Cai.
21) TLAN driver SKB encoding in descriptor busted on 64-bit, fix from
Benjamin Poirier.
22) Fix blind status block RX producer pointer deref in TG3 driver, from
Matt Carlson.
23) Promisc and multicast are busted on ehea, fixes from Thadeu Lima de
Souza Cascardo.
24) Fix crashes in 6lowpan, from Alexander Smirnov.
25) tcp_complete_cwr() needs to be careful to not rewind the CWND to
ssthresh if ssthresh has the "infinite" value. Fix from Yuchung
Cheng.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
sungem: Fix WakeOnLan
tcp: change tcp_adv_win_scale and tcp_rmem[2]
net: l2tp: unlock socket lock before returning from l2tp_ip_sendmsg
drop_monitor: prevent init path from scheduling on the wrong cpu
usbnet: fix failure handling in usbnet_probe
usbnet: fix leak of transfer buffer of dev->interrupt
ucc_geth: Add 16 bytes to max TX frame for VLANs
net: ucc_geth, increase no. of HW RX descriptors
netem: fix possible skb leak
sky2: fix receive length error in mixed non-VLAN/VLAN traffic
sky2: propogate rx hash when packet is copied
net: fix two typos in skbuff.h
cxgb3: Don't call cxgb_vlan_mode until q locks are initialized
ixgbe: fix calling skb_put on nonlinear skb assertion bug
ixgbe: Fix a memory leak in IEEE DCB
igbvf: fix the bug when initializing the igbvf
smsc75xx: enable mac to detect speed/duplex from phy
smsc75xx: declare smsc75xx's MII as GMII capable
smsc75xx: fix phy interrupt acknowledge
smsc75xx: fix phy init reset loop
...
Linus Torvalds [Fri, 4 May 2012 00:08:58 +0000 (17:08 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix OOPS seen in coretemp driver if the CPU core ID is too large"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (coretemp) Increase CPU core limit
hwmon: (coretemp) fix oops on cpu unplug
Linus Torvalds [Thu, 3 May 2012 17:16:43 +0000 (10:16 -0700)]
vfs: make word-at-a-time accesses handle a non-existing page
It turns out that there are more cases than CONFIG_DEBUG_PAGEALLOC that
can have holes in the kernel address space: it seems to happen easily
with Xen, and it looks like the AMD gart64 code will also punch holes
dynamically.
Actually hitting that case is still very unlikely, so just do the
access, and take an exception and fix it up for the very unlikely case
of it being a page-crosser with no next page.
And hey, this abstraction might even help other architectures that have
other issues with unaligned word accesses than the possible missing next
page. IOW, this could do the byte order magic too.
Peter Anvin fixed a thinko in the shifting for the exception case.
Reported-and-tested-by: Jana Saout <jana@saout.de>
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Layton [Wed, 2 May 2012 18:02:40 +0000 (14:02 -0400)]
cifs: make sure we ignore the credentials= and cred= options
Older mount.cifs programs passed this on to the kernel after parsing
the file. Make sure the kernel ignores that option.
Should fix:
https://bugzilla.kernel.org/show_bug.cgi?id=43195
Cc: Sachin Prabhu <sprabhu@redhat.com>
Reported-by: Ronald <ronald645@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Steve French [Wed, 2 May 2012 16:58:19 +0000 (11:58 -0500)]
[CIFS] Update cifs version to 1.78
Signed-off-by: Steve French <sfrench@us.ibm.com>
Ian Kent [Wed, 2 May 2012 11:19:09 +0000 (07:19 -0400)]
cifs - check S_AUTOMOUNT in revalidate
When revalidating a dentry, if the inode wasn't known to be a dfs
entry when the dentry was instantiated, such as when created via
->readdir(), the DCACHE_NEED_AUTOMOUNT flag needs to be set on the
dentry in ->d_revalidate().
The false return from cifs_d_revalidate(), due to the inode now
being marked with the S_AUTOMOUNT flag, might not invalidate the
dentry if there is a concurrent unlazy path walk. This is because
the dentry reference count will be at least 2 in this case causing
d_invalidate() to return EBUSY. So the asumption that the dentry
will be discarded then correctly instantiated via ->lookup() might
not hold.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Cc: Steve French <smfrench@gmail.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <sfrench@us.ibm.com>
Viresh Kumar [Sat, 21 Apr 2012 12:10:12 +0000 (17:40 +0530)]
ata: ahci_platform: Add synopsys ahci controller in DT's compatible list
SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares
ahci_platform driver with other controller versions.
This patch updates DT compatible list for ahci_platform. It also updates and
renames binding documentation to more generic name.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Viresh Kumar [Sat, 21 Apr 2012 12:10:09 +0000 (17:40 +0530)]
ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
#ifdef, #endif is not required in definition/usage of arasan_cf_pm_ops. So, move
this definition and its usage outside of them.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tero Roponen [Sun, 22 Apr 2012 08:38:00 +0000 (11:38 +0300)]
libata: init ata_print_id to 0
When comparing the dmesg between 3.4-rc3 and 3.4-rc4 I found the
following differences:
-ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47
-ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47
-ata3: DUMMY
+ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47
+ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47
ata4: DUMMY
ata5: DUMMY
-ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47
+ata6: DUMMY
+ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47
The change of numbering comes from commit
85d6725b7c0d7e3f ("libata:
make ata_print_id atomic") that changed lines like
ap->print_id = ata_print_id++;
to
ap->print_id = atomic_inc_return(&ata_print_id);
As the latter behaves like ++ata_print_id, we must initialize
it to zero to start the numbering from one.
Signed-off-by: Tero Roponen <tero.roponen@gmail.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>