OSDN Git Service
Richard Henderson [Thu, 22 May 2014 17:59:12 +0000 (10:59 -0700)]
tcg/optimize: Move updating of gen_opc_buf into tcg_opt_gen_mov*
No functional change, just reduce a bit of redundancy.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 15 May 2014 19:49:56 +0000 (12:49 -0700)]
tcg-sparc: Make debug_frame const
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 15 May 2014 19:49:42 +0000 (12:49 -0700)]
tcg-s390: Make debug_frame const
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 15 May 2014 19:49:30 +0000 (12:49 -0700)]
tcg-arm: Make debug_frame const
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 15 May 2014 19:49:13 +0000 (12:49 -0700)]
tcg-aarch64: Make debug_frame const
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 15 May 2014 19:48:43 +0000 (12:48 -0700)]
tcg-i386: Make debug_frame const
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 15 May 2014 19:48:01 +0000 (12:48 -0700)]
tcg: Allow the debug_frame data structure to be constant
Adjust the FDE to point to the code_buffer after we've copied it
to the image, rather than requiring that the backend set it prior.
This allows the backend to use read-only storage for its data.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 8 Apr 2014 15:53:28 +0000 (08:53 -0700)]
tcg: Move size effects out of dh_arg
Tidying the initialization of the args arrays at the same time.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 8 Apr 2014 15:39:43 +0000 (08:39 -0700)]
tcg: Remove sizemask and flags arguments to tcg_gen_callN
Take them from the TCGHelperInfo struct instead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 7 Apr 2014 22:10:05 +0000 (15:10 -0700)]
tcg: Save flags and computed sizemask in TCGHelperInfo
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 8 Apr 2014 07:17:53 +0000 (00:17 -0700)]
tcg: Register the helper info struct rather than the name
This will let us find all the info from the hash table.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 8 Apr 2014 07:01:09 +0000 (00:01 -0700)]
tcg: Move side effects out of dh_sizemask
Moving them into dh_arg instead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 8 Apr 2014 06:44:10 +0000 (23:44 -0700)]
tcg: Inline tcg_gen_helperN
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 8 Apr 2014 06:36:08 +0000 (23:36 -0700)]
tcg: Use helper-gen.h in tcg-op.h
No need to open-code the setup of the builtin helpers.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 8 Apr 2014 06:08:47 +0000 (23:08 -0700)]
tcg: Push tcg-runtime routines into exec/helper-*
Rather than special casing them, use the standard mechanisms
for tcg helper generation.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 8 Apr 2014 05:31:41 +0000 (22:31 -0700)]
tcg: Invert the inclusion of helper.h
Rather than include helper.h with N values of GEN_HELPER, include a
secondary file that sets up the macros to include helper.h. This
minimizes the files that must be rebuilt when changing the macros
for file N.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 24 Apr 2014 05:18:30 +0000 (22:18 -0700)]
tcg: Optimize brcond2 and setcond2 ne/eq
If either the high or low pair can be resolved, we can
simplify to either a constant or to a 32-bit comparison.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Peter Maydell [Wed, 28 May 2014 14:22:40 +0000 (15:22 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Wed 28 May 2014 13:31:15 BST using RSA key ID
81AB73C8
# gpg: Can't check signature: public key not found
* remotes/stefanha/tags/block-pull-request: (33 commits)
block/sheepdog: Don't use qerror_report()
block/sheepdog: Fix silent sd_open(), sd_create() failures
block/sheepdog: Propagate errors to open and create methods
block/sheepdog: Propagate errors through find_vdi_name()
block/sheepdog: Propagate errors through do_sd_create()
block/sheepdog: Propagate errors through sd_prealloc()
block/sheepdog: Propagate errors through get_sheep_fd()
block/sheepdog: Propagate errors through connect_to_sdog()
block/vvfat: Propagate errors through init_directories()
block/vvfat: Propagate errors through enable_write_target()
block/ssh: Propagate errors to open and create methods
block/ssh: Propagate errors through connect_to_ssh()
block/ssh: Propagate errors through authenticate()
block/ssh: Propagate errors through check_host_key()
block/ssh: Drop superfluous libssh2_session_last_errno() calls
block/rbd: Propagate errors to open and create methods
qemu-nbd: Don't use qerror_report()
blockdev: Don't use qerror_report() in do_drive_del()
blockdev: Don't use qerror_report_err() in drive_init()
docs: Define refcount_bits value
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 28 May 2014 14:00:33 +0000 (15:00 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20140527' into staging
target-arm:
* Preliminary restructuring for EL2/EL3 support
* improve CPACR handling
* fix pxa2xx_lcd palette formats
* update highbank/midway maintainer
# gpg: Signature made Tue 27 May 2014 17:26:27 BST using RSA key ID
14360CDE
# gpg: Can't check signature: public key not found
* remotes/pmaydell/tags/pull-target-arm-
20140527: (26 commits)
target-arm: A64: Register VBAR_EL3
target-arm: A64: Register VBAR_EL2
target-arm: Make vbar_write writeback to any CPREG
target-arm: A64: Generalize update_spsel for the various ELs
target-arm: A64: Generalize ERET to various ELs
target-arm: A64: Trap ERET from EL0 at translation time
target-arm: A64: Forbid ERET to higher or unimplemented ELs
target-arm: Register EL3 versions of ELR and SPSR
target-arm: Register EL2 versions of ELR and SPSR
target-arm: Add a feature flag for EL3
target-arm: Add a feature flag for EL2
target-arm: A64: Introduce aarch64_banked_spsr_index()
target-arm: Add SPSR entries for EL2/HYP and EL3/MON
target-arm: A64: Add ELR entries for EL2 and 3
target-arm: A64: Add SP entries for EL2 and 3
target-arm: c12_vbar -> vbar_el[]
target-arm: Make esr_el1 an array
target-arm: Make elr_el1 an array
target-arm: Use a 1:1 mapping between EL and MMU index
target-arm: A32: Use get_mem_index for load/stores
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 28 May 2014 13:47:35 +0000 (14:47 +0100)]
Merge remote-tracking branch 'remotes/xtensa/tags/
20140526-xtensa' into staging
Xtensa fixes queue 2014-05-26:
- fix cross-page jumps/calls at the end of TB;
- add tests for TBs and instructions crossing page boundary.
# gpg: Signature made Mon 26 May 2014 09:37:39 BST using RSA key ID
F83FA044
# gpg: Can't check signature: public key not found
* remotes/xtensa/tags/
20140526-xtensa:
target-xtensa: add tests for cross-page TB
target-xtensa: completely clean TLB between MMU tests
target-xtensa: fix cross-page jumps/calls at the end of TB
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 28 May 2014 12:52:03 +0000 (13:52 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-7' into staging
usb: usb3 streams support for usb-host and usb-redir
usb: xhci and mtp bugfixes.
# gpg: Signature made Mon 26 May 2014 09:44:09 BST using RSA key ID
D3E87138
# gpg: Can't check signature: public key not found
* remotes/kraxel/tags/pull-usb-7:
usb-host-libusb: Set stream id when submitting bulk-stream transfers
usb-host-libusb: Add alloc / free streams ops
usb-host-libusb: Fill in endpoint max_streams when available
usb-redir: Add support for bulk streams
usb-mtp: handle usb_mtp_get_object failure
usb-mtp: handle lseek failure
usb-mtp: use bool to track MTPObject init status
xhci: add xhci_get_flag
xhci: add endpoint cap on express bus only
xhci: child detach fix
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Markus Armbruster [Fri, 16 May 2014 09:00:26 +0000 (11:00 +0200)]
block/sheepdog: Don't use qerror_report()
qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP. It should not be used elsewhere.
Replace by error_report().
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:25 +0000 (11:00 +0200)]
block/sheepdog: Fix silent sd_open(), sd_create() failures
Open and create methods must set an error when they fail.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:24 +0000 (11:00 +0200)]
block/sheepdog: Propagate errors to open and create methods
Completes the conversion to Error started in commit
015a103^..
d5124c0,
except for a few bugs fixed in the next commit.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:23 +0000 (11:00 +0200)]
block/sheepdog: Propagate errors through find_vdi_name()
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:22 +0000 (11:00 +0200)]
block/sheepdog: Propagate errors through do_sd_create()
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:21 +0000 (11:00 +0200)]
block/sheepdog: Propagate errors through sd_prealloc()
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:20 +0000 (11:00 +0200)]
block/sheepdog: Propagate errors through get_sheep_fd()
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:19 +0000 (11:00 +0200)]
block/sheepdog: Propagate errors through connect_to_sdog()
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:18 +0000 (11:00 +0200)]
block/vvfat: Propagate errors through init_directories()
Completes the conversion of the open method to Error started in commit
015a103.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:17 +0000 (11:00 +0200)]
block/vvfat: Propagate errors through enable_write_target()
Continues the conversion of the open method to Error started in commit
015a103.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:16 +0000 (11:00 +0200)]
block/ssh: Propagate errors to open and create methods
Completes the conversion to Error started in commit
015a103^..
d5124c0.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:15 +0000 (11:00 +0200)]
block/ssh: Propagate errors through connect_to_ssh()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:14 +0000 (11:00 +0200)]
block/ssh: Propagate errors through authenticate()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:13 +0000 (11:00 +0200)]
block/ssh: Propagate errors through check_host_key()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:12 +0000 (11:00 +0200)]
block/ssh: Drop superfluous libssh2_session_last_errno() calls
libssh2_session_last_error() already returns the error code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:11 +0000 (11:00 +0200)]
block/rbd: Propagate errors to open and create methods
Completes the conversion to Error started in commit
015a103^..
d5124c0.
Cc: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:10 +0000 (11:00 +0200)]
qemu-nbd: Don't use qerror_report()
qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP. It should not be used elsewhere.
Replace by error_report().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:09 +0000 (11:00 +0200)]
blockdev: Don't use qerror_report() in do_drive_del()
qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP. It should not be used elsewhere.
do_drive_del() is an HMP command that won't be converted to QMP (we'll
create a new QMP command instead). It uses both qerror_report() and
error_report(). Convert the former to the latter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Markus Armbruster [Fri, 16 May 2014 09:00:08 +0000 (11:00 +0200)]
blockdev: Don't use qerror_report_err() in drive_init()
qerror_report_err() is a transitional interface to help with
converting existing HMP commands to QMP. It should not be used
elsewhere.
drive_init() is not meant to be used by QMP commands. It uses both
qerror_report_err() and error_report(). Convert the former to the
latter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Maria Kustova [Fri, 23 May 2014 13:41:29 +0000 (17:41 +0400)]
docs: Define refcount_bits value
The 'refcount_bits' term used in the description of refcount block entry is
not defined in the specification. The definition is added in the
'refcount_order' section where refcount_bits was used as 'width in bits'.
Signed-off-by: Maria Kustova <maria.k@catit.be>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Fri, 23 May 2014 13:29:48 +0000 (21:29 +0800)]
block: Drop redundant bdrv_refresh_limits
The above bdrv_set_backing_hd already does this.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Fri, 23 May 2014 13:29:47 +0000 (21:29 +0800)]
block: Add backing_blocker in BlockDriverState
This makes use of op_blocker and blocks all the operations except for
commit target, on each BlockDriverState->backing_hd.
The asserts for op_blocker in bdrv_swap are removed because with this
change, the target of block commit has at least the backing blocker of
its child, so the assertion is not true. Callers should do their check.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Fri, 23 May 2014 13:29:46 +0000 (21:29 +0800)]
block: Use bdrv_set_backing_hd everywhere
We need to handle the coming backing_blocker properly, so don't open
code the assignment, instead, call bdrv_set_backing_hd to change
backing_hd.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Fri, 23 May 2014 13:29:45 +0000 (21:29 +0800)]
block: Add bdrv_set_backing_hd()
This is the common but non-trivial steps to assign or change the
backing_hd of BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Fri, 23 May 2014 13:29:44 +0000 (21:29 +0800)]
block: Move op_blocker check from block_job_create to its caller
It makes no sense to check for "any" blocker on bs, we are here only
because of the mechanical conversion from in_use to op_blockers. Remove
it now, and let the callers check specific operation types. Backup and
mirror already have it, add checker to stream and commit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Fri, 23 May 2014 13:29:43 +0000 (21:29 +0800)]
block: Replace in_use with operation blocker
This drops BlockDriverState.in_use with op_blockers:
- Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).
- Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).
- Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).
The specific types are used, e.g. in place of starting block backup,
bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).
There is one exception in block_job_create, where
bdrv_op_blocker_is_empty() is used, because we don't know the operation
type here. This doesn't matter because in a few commits away we will drop
the check and move it to callers that _do_ know the type.
- Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).
Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
this moment. So although the checks are specific to op types, this
changes can still be seen as identical logic with previously with
in_use. The difference is error message are improved because of blocker
error info.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Fri, 23 May 2014 13:29:42 +0000 (21:29 +0800)]
block: Introduce op_blockers to BlockDriverState
BlockDriverState.op_blockers is an array of lists with BLOCK_OP_TYPE_MAX
elements. Each list is a list of blockers of an operation type
(BlockOpType), that marks this BDS as currently blocked for a certain
type of operation with reason errors stored in the list. The rule of
usage is:
* BDS user who wants to take an operation should check if there's any
blocker of the type with bdrv_op_is_blocked().
* BDS user who wants to block certain types of operation, should call
bdrv_op_block (or bdrv_op_block_all to block all types of operations,
which is similar to the existing bdrv_set_in_use()).
* A blocker is only referenced by op_blockers, so the lifecycle is
managed by caller, and shouldn't be lost until unblock, so typically
a caller does these:
- Allocate a blocker with error_setg or similar, call bdrv_op_block()
to block some operations.
- Hold the blocker, do his job.
- Unblock operations that it blocked, with the same reason pointer
passed to bdrv_op_unblock().
- Release the blocker with error_free().
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Fri, 23 May 2014 13:29:41 +0000 (21:29 +0800)]
block: Add BlockOpType enum
This adds the enum of all the operations that can be taken on a block
device.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Max Reitz [Tue, 20 May 2014 20:43:19 +0000 (22:43 +0200)]
iotests: Use _img_info in test 089
Currently, test 089 uses $QEMU_IMG info manually in order to obtain the
according output. However, the iotests should generally use _img_info as
this filters out more irrelevant information such as the host image size
or format specific information. Therefore, test 089 should use _img_info
as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Wed, 21 May 2014 02:42:13 +0000 (10:42 +0800)]
aio: Fix use-after-free in cancellation path
The current flow of canceling a thread from THREAD_ACTIVE state is:
1) Caller wants to cancel a request, so it calls thread_pool_cancel.
2) thread_pool_cancel waits on the conditional variable
elem->check_cancel.
3) The worker thread changes state to THREAD_DONE once the task is
done, and notifies elem->check_cancel to allow thread_pool_cancel
to continue execution, and signals the notifier (pool->notifier) to
allow callback function to be called later. But because of the
global mutex, the notifier won't get processed until step 4) and 5)
are done.
4) thread_pool_cancel continues, leaving the notifier signaled, it
just returns to caller.
5) Caller thinks the request is already canceled successfully, so it
releases any related data, such as freeing elem->common.opaque.
6) In the next main loop iteration, the notifier handler,
event_notifier_ready, is called. It finds the canceled thread in
THREAD_DONE state, so calls elem->common.cb, with an (likely)
dangling opaque pointer. This is a use-after-free.
Fix it by calling event_notifier_ready before leaving
thread_pool_cancel.
Test case update: This change will let cancel complete earlier than
test-thread-pool.c expects, so update the code to check this case: if
it's already done, done_cb sets .aiocb to NULL, skip calling
bdrv_aio_cancel on them.
Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Mon, 19 May 2014 15:56:01 +0000 (17:56 +0200)]
qcow2: Fix memory leak in COW error path
This triggers if bs->drv becomes NULL in a concurrent request. This is
currently only the case when corruption prevention kicks in (i.e. at
most once per image, and after that it produces I/O errors).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Leandro Dorileo [Mon, 19 May 2014 21:53:55 +0000 (18:53 -0300)]
QemuOpt: add unit tests
Cover basic aspects and API usage for QemuOpt. The current implementation
covers the API's planned to be changed by Chunyan Liu in his QEMUOptionParameter
replacement/cleanup job.
Other APIs should be covered in future improvements.
[Squashing in a small fix "QemuOpt: use qemu_find_opts_err() to avoid
output on stderr in tests".
qemu_find_opts() calls error_report() instead of propagating the Error
object. It is undesirable to clutter test case output with error
messages from a passing test.
Use qemu_find_opts_err() to avoid the output on stderr.
--Stefan]
Signed-off-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Tue, 20 May 2014 01:10:32 +0000 (09:10 +0800)]
qemu-iotests: Handle cache mode option in 091
We should allow testing this on tmpfs. Any cache setting in iotests
should try to obey $CACHEMODE.
The cache mode is still "none" by default but overridable
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Wed, 28 May 2014 11:36:25 +0000 (12:36 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-console-1' into staging
console: multiwindow support for text terminal QemuConsoles
console: small fixes
# gpg: Signature made Mon 26 May 2014 09:17:27 BST using RSA key ID
D3E87138
# gpg: Can't check signature: public key not found
* remotes/kraxel/tags/pull-console-1:
console: add kbd_put_keysym_console
console: rework text terminal cursor logic
console: update text terminal surface unconditionally
console: nicer initial screen
console: Abort on property access errors
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 28 May 2014 10:18:58 +0000 (11:18 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-gtk-7' into staging
gtk: ui overhaul, multiwindow support.
# gpg: Signature made Mon 26 May 2014 08:54:55 BST using RSA key ID
D3E87138
# gpg: Can't check signature: public key not found
* remotes/kraxel/tags/pull-gtk-7: (24 commits)
gtk: workaround gtk2 vte resize issue
gtk: window sizing overhaul
gtk: zap unused global_state
gtk: Add handling for the xfree86 keycodes
gtk: enable untabify for gfx
gtk: detached window pointer grabs
gtk: update all windows on mouse mode changes
gtk: fix grab checks
gtk: update gd_update_caption
gtk: skip keyboard grab when hover autograb is active
gtk: keep track of grab owner
gtk: add gd_grab trace event
gtk: add tab to trace events
gtk: allow moving tabs to windows and back.
gtk: simplify resize
gtk: use device type as label
gtk: support multiple gfx displays
gtk: move vga state into VirtualGfxConsole
gtk: VirtualConsole restruction
gtk: remove page numbering assumtions from the code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 28 May 2014 09:33:05 +0000 (10:33 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-9' into staging
input: add event routing and multiseat support.
input: misc bugfixes and minor improvements.
# gpg: Signature made Mon 26 May 2014 07:44:29 BST using RSA key ID
D3E87138
# gpg: Can't check signature: public key not found
* remotes/kraxel/tags/pull-input-9:
docs: add multiseat.txt
usb: add input routing support for tablet and keyboard
sdl: pass key event source to input layer
input: bind devices and input routing
input: switch hid mouse and tablet to the new input layer api.
input: switch hid keyboard to new input layer api.
input: keymap: add meta keys
input: add name to input_event_key_number
input: add qemu_input_key_number_to_qcode
input (curses): mask keycodes to remove modifier bits
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 27 May 2014 21:45:03 +0000 (22:45 +0100)]
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-05-26' into staging
trivial patches for 2014-05-26
# gpg: Signature made Mon 26 May 2014 08:17:08 BST using RSA key ID
A4C3D7DB
# gpg: Can't check signature: public key not found
* remotes/mjt/tags/trivial-patches-2014-05-26: (23 commits)
libcacard: remove useless initializers
net: cadence_gem: Fix top comment
bsd-user: replace fprintf(stderr, ...) with error_report()
audio: replace fprintf(stderr, ...) with error_report() in audio
libcacard: fix wrong array expansion logic
libcacard/vcard_emul_nss: Drop a redundant conditional
libcacard: Convert two leftover realloc() to GLib
libcacard/vreader: Tighten assertion to clarify intent
libcacard/vreader: Drop broken recovery from failed assertion
libcacard: Plug memory leaks around vreader_get_reader_list()
libcacard/vscclient: Bury some dead code
vl: fix 'name' option to work with -readconfig
configure: Put tempfiles in a subdir of the build directory
dma-helpers: avoid calling dma_bdrv_unmap() twice
arch_init: replace fprintf(stderr, ...) with error_report()
pci: move dereferencing of root only after verifying valid root pointer
jazz_led: Add missing break in switch case
bswap.h: Rename ldl_p, stl_p, etc to ldl_he_p, stl_he_p, etc
configure: Automatically select GTK+ 3.0 if GTK+ 2.0 is unavailable
nbd: Miscellaneous typo fixes.
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 27 May 2014 21:11:25 +0000 (22:11 +0100)]
Merge remote-tracking branch 'remotes/mwalle/tags/lm32-semihosting/
20140524' into staging
* remotes/mwalle/tags/lm32-semihosting/
20140524:
lm32: remove lm32_sys
test: lm32: use semihosting for testing
target-lm32: add semihosting support
test: lm32: make test cases independent
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 27 May 2014 17:31:02 +0000 (18:31 +0100)]
Merge remote-tracking branch 'remotes/rth/tcg-mips' into staging
* remotes/rth/tcg-mips: (24 commits)
tcg-mips: Enable direct chaining of TBs
tcg-mips: Simplify movcond
tcg-mips: Simplify brcond2
tcg-mips: Improve setcond eq/ne vs zeros
tcg-mips: Simplify setcond2
tcg-mips: Simplify brcond
tcg-mips: Simplify setcond
tcg-mips: Commonize opcode implementations
tcg-mips: Improve add2/sub2
tcg-mips: Hoist args loads
tcg-mips: Fix subtract immediate range
tcg-mips: Name the opcode enumeration
tcg-mips: Use EXT for AND on mips32r2
tcg-mips: Use T9 for TCG_TMP1
tcg-mips: Introduce TCG_TMP0, TCG_TMP1
tcg-mips: Rearrange register allocation
tcg-mips: Convert to new_ldst
tcg-mips: Convert to new qemu_l/st helpers
tcg-mips: Move softmmu slow path out of line
tcg-mips: Split large ldst offsets
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:55 +0000 (17:09 +0100)]
target-arm: A64: Register VBAR_EL3
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-24-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:54 +0000 (17:09 +0100)]
target-arm: A64: Register VBAR_EL2
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-23-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:54 +0000 (17:09 +0100)]
target-arm: Make vbar_write writeback to any CPREG
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-22-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:54 +0000 (17:09 +0100)]
target-arm: A64: Generalize update_spsel for the various ELs
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-21-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:54 +0000 (17:09 +0100)]
target-arm: A64: Generalize ERET to various ELs
Adds support for ERET to and from AArch64 EL2 and 3.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-20-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:54 +0000 (17:09 +0100)]
target-arm: A64: Trap ERET from EL0 at translation time
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-19-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:53 +0000 (17:09 +0100)]
target-arm: A64: Forbid ERET to higher or unimplemented ELs
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-18-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:53 +0000 (17:09 +0100)]
target-arm: Register EL3 versions of ELR and SPSR
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-17-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:53 +0000 (17:09 +0100)]
target-arm: Register EL2 versions of ELR and SPSR
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-16-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:53 +0000 (17:09 +0100)]
target-arm: Add a feature flag for EL3
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-15-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:52 +0000 (17:09 +0100)]
target-arm: Add a feature flag for EL2
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-14-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:52 +0000 (17:09 +0100)]
target-arm: A64: Introduce aarch64_banked_spsr_index()
Add aarch64_banked_spsr_index(), used to map an Exception Level
to an index in the banked_spsr array.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-13-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:52 +0000 (17:09 +0100)]
target-arm: Add SPSR entries for EL2/HYP and EL3/MON
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-12-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:52 +0000 (17:09 +0100)]
target-arm: A64: Add ELR entries for EL2 and 3
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-11-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:52 +0000 (17:09 +0100)]
target-arm: A64: Add SP entries for EL2 and 3
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-10-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:51 +0000 (17:09 +0100)]
target-arm: c12_vbar -> vbar_el[]
No functional change.
Preparation for adding EL2 and 3 versions of this reg.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-9-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:51 +0000 (17:09 +0100)]
target-arm: Make esr_el1 an array
No functional change.
Prepares for future addtion of EL2 and 3 versions of this reg.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-8-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:51 +0000 (17:09 +0100)]
target-arm: Make elr_el1 an array
No functional change.
Prepares for future additions of the EL2 and 3 versions of this reg.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-7-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:51 +0000 (17:09 +0100)]
target-arm: Use a 1:1 mapping between EL and MMU index
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id:
1400980132-25949-6-git-send-email-edgar.iglesias@gmail.com
Message-id:
1400805738-11889-7-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Tue, 27 May 2014 16:09:50 +0000 (17:09 +0100)]
target-arm: A32: Use get_mem_index for load/stores
Avoid using IS_USER directly as the MMU-idx to simplify future
changes to the MMU layout.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1400980132-25949-5-git-send-email-edgar.iglesias@gmail.com
Message-id:
1400805738-11889-6-git-send-email-edgar.iglesias@gmail.com
[PMM: parts relating to LDRT/STRT moved into earlier patches]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 27 May 2014 16:09:50 +0000 (17:09 +0100)]
target-arm/translate.c: Use get_mem_index() for SRS memory accesses
The SRS instruction was using a hardcoded 0 for the memory
accesses. This happens to be OK since the SRS instruction is
UNPREDICTABLE in User and System modes, but is awkward if we
want to rearrange the MMU index uses. Switch to using
get_mem_index() like all the other accesses.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1400980132-25949-4-git-send-email-edgar.iglesias@gmail.com
Peter Maydell [Tue, 27 May 2014 16:09:50 +0000 (17:09 +0100)]
target-arm/translate.c: Clean up mmu index handling for ldrt/strt
Clean up the mmu index handling for ldrt/strt insns: instead
of a flag 'user' indicating whether to treat the store as user
mode or not, use 'memidx' to indicate the correct memory index to use.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1400980132-25949-3-git-send-email-edgar.iglesias@gmail.com
Edgar E. Iglesias [Tue, 27 May 2014 16:09:50 +0000 (17:09 +0100)]
target-arm: Move get_mem_index to translate.h
So that it can be shared with the AArch32 code.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1400980132-25949-2-git-send-email-edgar.iglesias@gmail.com
Message-id:
1400805738-11889-5-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fabian Aggeler [Tue, 27 May 2014 16:09:49 +0000 (17:09 +0100)]
target-arm: implement CPACR register logic for ARMv7
In ARMv7 the CPACR register allows to control access rights to
coprocessor 0-13 interfaces. Bits corresponding to unimplemented
coprocessors should be RAZ/WI. Bits ASEDIS, D32DIS, TRCDIS are
UNK/SBZP if VFP is not implemented and RAO/WI in some cases.
Treating TRCDIS as RAZ/WI since we neither implement a trace
macrocell nor a CP14 interface to the trace macrocell registers.
Since CPACR bits for VFP/Neon access are honoured with the CPACR_FPEN
bit in the TB flags, flushing the TLB is not necessary anymore.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Message-id:
1400532968-30668-1-git-send-email-aggelerf@ethz.ch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 27 May 2014 16:09:49 +0000 (17:09 +0100)]
hw/display/pxa2xx_lcd: Fix 16bpp+alpha and 18bpp+alpha palette formats
The pxa2xx palette entry "16bpp plus transparency" format is
xxxxxxxTRRRRR000GGGGGG00BBBBB000, and "18bpp plus transparency" is
xxxxxxxTRRRRRR00GGGGGG00BBBBBB00.
Correct errors in the code for reading these and converting
them to the internal format. In particular, the buggy code
was attempting to mask out bit 24 of a uint16_t, which
Coverity spotted as an error.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1400233901-31785-1-git-send-email-peter.maydell@linaro.org
Rob Herring [Tue, 27 May 2014 16:09:49 +0000 (17:09 +0100)]
MAINTAINERS: update Calxeda Highbank maintainer and status
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Message-id:
1400116198-3155-1-git-send-email-robherring2@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 27 May 2014 13:44:03 +0000 (14:44 +0100)]
Merge remote-tracking branch 'remotes/rth/fix-tci' into staging
* remotes/rth/fix-tci:
tci: Fix tcg_out_call
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Christoffer Dall [Tue, 27 May 2014 12:37:43 +0000 (14:37 +0200)]
target-arm: Fix segfault on startup when KVM enabled
Commit
50a2c6e55fa introduced a bug where QEMU would segfault on startup
when using KVM on ARM hosts, because kvm_arm_reset_cpu() accesses
cpu->cpreg_reset_values, which is not allocated before
kvm_arch_init_vcpu(). Fix this by not calling cpu_reset() until after
qemu_init_vcpu().
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id:
1401194263-13010-1-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Max Filippov [Tue, 20 May 2014 18:24:56 +0000 (22:24 +0400)]
target-xtensa: add tests for cross-page TB
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Tue, 20 May 2014 20:50:12 +0000 (00:50 +0400)]
target-xtensa: completely clean TLB between MMU tests
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Tue, 20 May 2014 10:48:45 +0000 (14:48 +0400)]
target-xtensa: fix cross-page jumps/calls at the end of TB
Use tb->pc instead of dc->pc to check for cross-page jumps.
When TB translation stops at the page boundary dc->pc points to the next
page allowing chaining to TBs in it, which is wrong.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Gerd Hoffmann [Tue, 20 May 2014 07:17:01 +0000 (09:17 +0200)]
docs: add multiseat.txt
Howto on setting up multiseat for guests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Mon, 19 May 2014 13:26:51 +0000 (15:26 +0200)]
usb: add input routing support for tablet and keyboard
Add display property to the keyboard.
Add display and head properties to the tablet.
If properties are set bind device to the display specified to
setup input routing.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 20 May 2014 06:11:25 +0000 (08:11 +0200)]
sdl: pass key event source to input layer
So the input layer knows where the input is coming from
and input routing works correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Mon, 19 May 2014 13:18:37 +0000 (15:18 +0200)]
input: bind devices and input routing
Add function to bind input devices to display devices. Implementing
input routing on top of this: Events coming from the display device in
question are routed to the input device bound to it (if there is one).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Mon, 19 May 2014 13:02:21 +0000 (15:02 +0200)]
input: switch hid mouse and tablet to the new input layer api.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 11 Mar 2014 12:52:27 +0000 (13:52 +0100)]
input: switch hid keyboard to new input layer api.
Minimal patch to get the switchover done. We continue processing ps/2
scancodes for now as they are part of the live migration stream. Fixing
that, then mapping directly from QKeyValue to HID keycodes is left as
excercise for another day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 21 May 2014 11:54:32 +0000 (13:54 +0200)]
input: keymap: add meta keys
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 21 May 2014 11:49:59 +0000 (13:49 +0200)]
input: add name to input_event_key_number
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 21 May 2014 11:28:32 +0000 (13:28 +0200)]
input: add qemu_input_key_number_to_qcode
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>