OSDN Git Service
Mark Lord [Fri, 19 May 2006 20:36:36 +0000 (16:36 -0400)]
[PATCH] sata_mv: remove local copy of queue indexes
The driver currently keeps local copies of the hardware request/response queue indexes.
But it expends significant effort ensuring consistency between the two views,
and still gets it wrong after an error or reset occurs.
This patch removes the local copies, in favour of just accessing the hardware
whenever we need them. Eventually this may need to be tweaked again for NCQ,
but for now this works and solves problems some users were seeing.
Signed-off-by: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Mark Lord [Fri, 19 May 2006 20:33:03 +0000 (16:33 -0400)]
[PATCH] sata_mv: spurious interrupt workaround
The 60xx chips, and possibly others, incorrectly assert DEV_IRQ interrupts
on a regular basis. The cause of this is under investigation (by me and
in theory by Marvell also), but regardless we do need to deal with these events.
This patch tidies up some interrupt handler code, and ensures that we ignore
DEV_IRQ interrupts when the drive still has ATA_BUSY asserted.
Signed-off-by: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Mark Lord [Fri, 19 May 2006 20:29:21 +0000 (16:29 -0400)]
[PATCH] sata_mv: chip initialization fixes
The interface control register of the 60xx (and later) Marvell chip
requires certain bits to always be set when writing to it. These bits
incorrectly read-back as zeros, so the pattern must be ORed in
with each write of the register. Also, bit 12 should NOT be set
(note that Marvell's own driver also had bit-12 wrong here).
While we're at it, we also now do pci_set_master() in the init code.
Signed-off-by: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Mark Lord [Fri, 19 May 2006 20:24:56 +0000 (16:24 -0400)]
[PATCH] sata_mv: deal with interrupt coalescing interrupts
In some systems, it is possible that the BIOS may have enabled interrupt coalescing
for the Marvell controllers which support it. This patch adds code to detect/ack
interrupts from the chip's coalescing (combing) logic.
Signed-off-by: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Mark Lord [Fri, 19 May 2006 20:21:03 +0000 (16:21 -0400)]
[PATCH] sata_mv: prevent unnecessary double-resets
The mv_err_intr() function is invoked from the driver's interrupt handler,
as well as from the timeout function. This patch prevents it from triggering
a one-after-the-other double reset of the controller when invoked
from the timeout function.
This also adds a check for a timeout race condition that has been observed
to occur with this driver in earlier kernels. This should not be needed,
in theory, but in practice it has caught bugs. Maybe nuke it at a later date.
Signed-off-by: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Linus Torvalds [Sat, 20 May 2006 01:52:59 +0000 (18:52 -0700)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IB/mthca: Fix posting lists of 256 receive requests for Tavor
IB/uverbs: Don't leak ref to mm on error path
IB/srp: Complete correct SCSI commands on device reset
IB/srp: Get rid of extra scsi_host_put()s if reconnection fails
IB/srp: Don't wait for disconnection if sending DREQ fails
IB/mthca: Make fw_cmd_doorbell default to 0
Linus Torvalds [Fri, 19 May 2006 23:48:54 +0000 (16:48 -0700)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[SCTP]: Allow linger to abort 1-N style sockets.
[SCTP]: Validate the parameter length in HB-ACK chunk.
[SCTP]: Respect the real chunk length when walking parameters.
[SCTP]: A better solution to fix the race between sctp_peeloff() and
[SCTP]: Set sk_err so that poll wakes up after a non-blocking connect failure.
Linus Torvalds [Fri, 19 May 2006 23:42:25 +0000 (16:42 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc
* master.kernel.org:/home/rmk/linux-2.6-mmc:
[ARM] 3531/1: i.MX/MX1 SD/MMC ensure, that clock are stopped before new command and cleanups
Linus Torvalds [Fri, 19 May 2006 23:42:11 +0000 (16:42 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 3533/1: Implement the __raw_(read|write)_can_lock functions on ARM
[ARM] 3530/1: PXA Mainstone: prevent double enable_irq() in pcmcia
[ARM] 3529/1: s3c24xx: fix restoring control register with undefined instruction
Linus Torvalds [Fri, 19 May 2006 23:41:59 +0000 (16:41 -0700)]
Merge /linux/kernel/git/wim/linux-2.6-watchdog
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] s3c2410_wdt.c stop watchdog after boot
[WATCHDOG] i8xx_tco.c - remove support for ICH6 + ICH7
[WATCHDOG] Documentation/watchdog/watchdog-api.txt - fix watchdog daemon
[WATCHDOG] sc1200wdt.c printk fix
Vladislav Yasevich [Fri, 19 May 2006 21:32:06 +0000 (14:32 -0700)]
[SCTP]: Allow linger to abort 1-N style sockets.
Enable SO_LINGER functionality for 1-N style sockets. The socket API
draft will be clarfied to allow for this functionality. The linger
settings will apply to all associations on a given socket.
Signed-off-by: Vladislav Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Vladislav Yasevich [Fri, 19 May 2006 21:25:53 +0000 (14:25 -0700)]
[SCTP]: Validate the parameter length in HB-ACK chunk.
If SCTP receives a badly formatted HB-ACK chunk, it is possible
that we may access invalid memory and potentially have a buffer
overflow. We should really make sure that the chunk format is
what we expect, before attempting to touch the data.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Catalin Marinas [Fri, 19 May 2006 20:55:35 +0000 (21:55 +0100)]
[ARM] 3533/1: Implement the __raw_(read|write)_can_lock functions on ARM
Patch from Catalin Marinas
Recent patches introduced the write_can_lock() call in the kernel/ptrace.c
file. Implement the __raw_* variants on ARM (SMP) as well.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pavel Pisa [Fri, 19 May 2006 20:48:03 +0000 (21:48 +0100)]
[ARM] 3531/1: i.MX/MX1 SD/MMC ensure, that clock are stopped before new command and cleanups
Patch from Pavel Pisa
There has been problems that for some paths that clock are not stopped
during new command programming and initiation. Result is issuing
of incorrect command to the card. Some other problems are cleaned too.
Noisy report of known ERRATUM #4 has been suppressed.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Vladislav Yasevich [Fri, 19 May 2006 18:52:20 +0000 (11:52 -0700)]
[SCTP]: Respect the real chunk length when walking parameters.
When performing bound checks during the parameter processing, we
want to use the real chunk and paramter lengths for bounds instead
of the rounded ones. This prevents us from potentially walking of
the end if the chunk length was miscalculated. We still use rounded
lengths when advancing the pointer. This was found during a
conformance test that changed the chunk length without modifying
parameters.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Vladislav Yasevich [Fri, 19 May 2006 18:01:18 +0000 (11:01 -0700)]
[SCTP]: A better solution to fix the race between sctp_peeloff() and
sctp_rcv().
The goal is to hold the ref on the association/endpoint throughout the
state-machine process. We accomplish like this:
/* ref on the assoc/ep is taken during lookup */
if owned_by_user(sk)
sctp_add_backlog(skb, sk);
else
inqueue_push(skb, sk);
/* drop the ref on the assoc/ep */
However, in sctp_add_backlog() we take the ref on assoc/ep and hold it
while the skb is on the backlog queue. This allows us to get rid of the
sock_hold/sock_put in the lookup routines.
Now sctp_backlog_rcv() needs to account for potential association move.
In the unlikely event that association moved, we need to retest if the
new socket is locked by user. If we don't this, we may have two packets
racing up the stack toward the same socket and we can't deal with it.
If the new socket is still locked, we'll just add the skb to its backlog
continuing to hold the ref on the association. This get's rid of the
need to move packets from one backlog to another and it also safe in
case new packets arrive on the same backlog queue.
The last step, is to lock the new socket when we are moving the
association to it. This is needed in case any new packets arrive on
the association when it moved. We want these to go to the backlog since
we would like to avoid the race between this new packet and a packet
that may be sitting on the backlog queue of the old socket toward the
same association.
Signed-off-by: Vladislav Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Sridhar Samudrala [Fri, 19 May 2006 17:58:12 +0000 (10:58 -0700)]
[SCTP]: Set sk_err so that poll wakes up after a non-blocking connect failure.
Also fix some other cases where sk_err is not set for 1-1 style sockets.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Patrick McHardy [Fri, 19 May 2006 09:17:18 +0000 (02:17 -0700)]
[NETFILTER]: nfnetlink_log: fix byteorder confusion
flags is a u16, so use htons instead of htonl. Also avoid double
conversion.
Noticed by Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Solar Designer [Fri, 19 May 2006 09:16:52 +0000 (02:16 -0700)]
[NETFILTER]: Fix do_add_counters race, possible oops or info leak (CVE-2006-0039)
Solar Designer found a race condition in do_add_counters(). The beginning
of paddc is supposed to be the same as tmp which was sanity-checked
above, but it might not be the same in reality. In case the integer
overflow and/or the race condition are triggered, paddc->num_counters
might not match the allocation size for paddc. If the check below
(t->private->number != paddc->num_counters) nevertheless passes (perhaps
this requires the race condition to be triggered), IPT_ENTRY_ITERATE()
would read kernel memory beyond the allocation size, potentially causing
an oops or leaking sensitive data (e.g., passwords from host system or
from another VPS) via counter increments. This requires CAP_NET_ADMIN.
Signed-off-by: Solar Designer <solar@openwall.com>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Fri, 19 May 2006 09:16:29 +0000 (02:16 -0700)]
[NETFILTER]: GRE conntrack: fix htons/htonl confusion
GRE keys are 16 bit.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Philip Craig [Fri, 19 May 2006 09:15:47 +0000 (02:15 -0700)]
[NETFILTER]: fix format specifier for netfilter log targets
The prefix argument for nf_log_packet is a format specifier,
so don't pass the user defined string directly to it.
Signed-off-by: Philip Craig <philipc@snapgear.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Fri, 19 May 2006 09:15:13 +0000 (02:15 -0700)]
[NETFILTER]: Fix memory leak in ipt_recent
The Coverity checker spotted that we may leak 'hold' in
net/ipv4/netfilter/ipt_recent.c::checkentry() when the following
is true:
if (!curr_table->status_proc) {
...
if(!curr_table) {
...
return 0; <-- here we leak.
Simply moving an existing vfree(hold); up a bit avoids the possible leak.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael S. Tsirkin [Thu, 18 May 2006 15:32:54 +0000 (18:32 +0300)]
IB/mthca: Fix posting lists of 256 receive requests for Tavor
If we post a list of length 256 exactly, nreq in doorbell gets set to
256 which is wrong: it should be encoded by 0. This is because we
only zero it out on the next WR, which may not be there. The solution
is to ring the doorbell after posting a WQE, not before posting the
next one.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Thu, 18 May 2006 05:20:50 +0000 (22:20 -0700)]
IB/uverbs: Don't leak ref to mm on error path
In ib_umem_release_on_close(), if the kmalloc() fails, then a
reference to current->mm will be leaked. Fix this by adding a mmput()
instead of just returning on kmalloc() failure.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Stefan Richter [Mon, 15 May 2006 20:09:46 +0000 (22:09 +0200)]
[PATCH] ohci1394, sbp2: fix "scsi_add_device failed" with PL-3507 based devices
Re-enable posted writes for status FIFO.
Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x
and older, this also fixes an interoperability regression since 2.6.16:
http://bugzilla.kernel.org/show_bug.cgi?id=6356
(sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.)
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Vanei Heidemann <linux@javanei.com.br>
Tested-by: Martin Putzlocher <mputzi@gmx.de> (chip type unconfirmed)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Stefan Richter [Mon, 15 May 2006 20:08:09 +0000 (22:08 +0200)]
[PATCH] sbp2: add ability to override hardwired blacklist
In case the blacklist with workarounds for device bugs yields a false
positive, the module load parameter can now also be used as an override
instead of an addition to the blacklist.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Stefan Richter [Mon, 15 May 2006 20:06:37 +0000 (22:06 +0200)]
[PATCH] sbp2: add read_capacity workaround for iPod
Apple decided to copy some USB stupidity over to FireWire.
The sector number returned by iPods from read_capacity is one too many.
This may cause I/O errors, especially if the kernel is configured for EFI
partition support. We use the same workaround as usb-storage but have to
check for different model IDs.
http://marc.theaimsgroup.com/?t=
114233262300001
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187409
Acknowledgements:
Diagnosis and therapy by Mathieu Chouquet-Stringer <ml2news@free.fr>,
additional data about affected and unaffected Apple hardware from
Vladimir Kotal, Sander De Graaf, Bryan Olmstead and Hugh Dixon.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Stefan Richter [Mon, 15 May 2006 20:04:59 +0000 (22:04 +0200)]
[PATCH] sbp2: consolidate workarounds
Grand unification of the three types of workarounds we have so far.
The "skip mode page 8" workaround is now limited to devices which
pretend to be of TYPE_DISK instead of TYPE_RBC. This workaround is no
longer enabled for Initio bridges.
Patch update in anticipation of more workarounds:
- Add module parameter "workarounds".
- Deprecate parameter "force_inquiry_hack".
- Compose the blacklist of a compound type for better readability and
extensibility.
- Remove a now unused #define.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Wed, 17 May 2006 23:30:31 +0000 (16:30 -0700)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[TCP]: reno sacked_out count fix
[IPV6]: Endian fix in net/ipv6/netfilter/ip6t_eui64.c:match().
[TR]: Remove an unused export.
[IPX]: Correct return type of ipx_map_frame_type().
[IPX]: Correct argument type of ipxrtr_delete().
[PKT_SCHED]: Potential jiffy wrap bug in dev_watchdog().
Linus Torvalds [Wed, 17 May 2006 23:13:25 +0000 (16:13 -0700)]
Merge git://git./linux/kernel/git/shemminger/netdev-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/netdev-2.6:
sky2: prevent dual port receiver problems
x86_64: Check for bad dma address in b44 1GB DMA workaround
The ixp2000 driver for the enp2611 was developed on a board with
Linus Torvalds [Wed, 17 May 2006 23:11:41 +0000 (16:11 -0700)]
Merge branch 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2
* 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2:
configfs: Make sure configfs_init() is called before consumers.
configfs: configfs_mkdir() failed to cleanup linkage.
configfs: Fix a reference leak in configfs_mkdir().
ocfs2: fix gfp mask in some file system paths
ocfs2: Don't populate uptodate cache in ocfs2_force_read_journal()
ocfs2: take meta data lock in ocfs2_file_aio_read()
ocfs2: take data locks around extend
Joel Becker [Wed, 3 May 2006 18:38:53 +0000 (11:38 -0700)]
configfs: Make sure configfs_init() is called before consumers.
configfs_init() needs to be called first to register configfs before anyconsumers try to access it. Move up configfs in fs/Makefile to make
sure it is initialized early.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Joel Becker [Wed, 12 Apr 2006 04:37:20 +0000 (21:37 -0700)]
configfs: configfs_mkdir() failed to cleanup linkage.
If configfs_mkdir() errored in certain ways after the parent<->child
linkage was already created, it would not undo the linkage. Also,
comment the reference counting for clarity.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Joel Becker [Tue, 28 Mar 2006 02:46:09 +0000 (18:46 -0800)]
configfs: Fix a reference leak in configfs_mkdir().
configfs_mkdir() failed to release the working parent reference in most
exit paths. Also changed the exit path for readability.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Sunil Mushran [Wed, 12 Apr 2006 21:37:00 +0000 (14:37 -0700)]
ocfs2: fix gfp mask in some file system paths
We were using GFP_KERNEL in a handful of places which really wanted
GFP_NOFS. Fix this.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Mark Fasheh [Wed, 12 Apr 2006 21:24:05 +0000 (14:24 -0700)]
ocfs2: Don't populate uptodate cache in ocfs2_force_read_journal()
This greatly reduces the amount of memory useded during recovery.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Mark Fasheh [Sat, 6 May 2006 02:04:35 +0000 (19:04 -0700)]
ocfs2: take meta data lock in ocfs2_file_aio_read()
Temporarily take the meta data lock in ocfs2_file_aio_read() to allow us to
update our inode fields.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Mark Fasheh [Sat, 6 May 2006 02:04:03 +0000 (19:04 -0700)]
ocfs2: take data locks around extend
We need to take a data lock around extends to protect the pages that
ocfs2_zero_extend is going to be pulling into the page cache. Otherwise an
extend on one node might populate the page cache with data pages that have
no lock coverage.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Linus Torvalds [Wed, 17 May 2006 21:28:57 +0000 (14:28 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] one-line cleanup on set_irq_affinity_info
[IA64] fix broken irq affinity
[IA64] sn2 defconfig
Thomas Gleixner [Wed, 17 May 2006 19:14:29 +0000 (20:14 +0100)]
[ARM] 3530/1: PXA Mainstone: prevent double enable_irq() in pcmcia
Patch from Thomas Gleixner
The mainstone board pcmcia interrupt have been enabled via setup_irq()
and the following socket check calls enable_irq again. Set the NOAUTOEN flag so the interrupt is not automatically enabled in setup_irq()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ishai Rabinovitz [Wed, 17 May 2006 16:20:48 +0000 (09:20 -0700)]
IB/srp: Complete correct SCSI commands on device reset
When flushing out queued commands after a successful device reset,
make sure that SRP completes the right commands, instead of calling
scsi_done on the command passed into the device reset handler over and
over.
Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Wed, 17 May 2006 16:16:03 +0000 (09:16 -0700)]
IB/srp: Get rid of extra scsi_host_put()s if reconnection fails
If a reconnection attempt fails, then SRP does two scsi_host_put()s.
This is a historical relic from an earlier version of the driver that
took a reference on the scsi_host before trying to reconnect, so get
rid of the extra scsi_host_put().
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Wed, 17 May 2006 16:13:21 +0000 (09:13 -0700)]
IB/srp: Don't wait for disconnection if sending DREQ fails
Sending a DREQ may fail, for example because the remote target has
already broken the connection. If so, then SRP should not wait for
the disconnection to complete, because it never will.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Dimitry Andric [Wed, 17 May 2006 15:31:11 +0000 (16:31 +0100)]
[ARM] 3529/1: s3c24xx: fix restoring control register with undefined instruction
Patch from Dimitry Andric
In arch/arm/mach-s3c2410/sleep.S, the coprocessor registers are saved at
suspend time, and restored at resume time. However, an undefined
instruction is used when attempting to restore a non-existent "auxiliary
control register". This leads to a crash on S3C2412, which has an ARM926
core instead of an ARM920.
At suspend time, the following fragment runs:
mrc p15, 0, r7, c2, c0, 0 @ translation table base address
mrc p15, 0, r8, c2, c0, 0 @ auxiliary control register
mrc p15, 0, r9, c1, c0, 0 @ control register
and at resume time, the following fragment runs:
mcr p15, 0, r7, c2, c0, 0 @ translation table base
mcr p15, 0, r8, c1, c1, 0 @ auxilliary control
...
mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc
There are several problems with these fragments:
1. The ARM920 and ARM926 cores don't have any "auxiliary control
register", at least not according to the ARM920 and ARM926 TRM's.
2. The 2nd line of suspend erroneously saves the c2 register again.
3. This saved c2 value is restored using an undefined instruction. For
some reason this does not crash on ARM920, but does crash on ARM926.
The following patch fixes all these problems.
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Yes, this looks sensible
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Roland Dreier [Wed, 17 May 2006 14:48:07 +0000 (07:48 -0700)]
IB/mthca: Make fw_cmd_doorbell default to 0
Setting fw_cmd_doorbell allows FW command to be queued using posted
writes instead of requiring polling on a "go" bit, so it should be a
performance boost. However, the option causes problems with at least
some device/firmware combinations, so set the default to 0 until we
understand what's going on better.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Chen, Kenneth W [Tue, 16 May 2006 23:34:57 +0000 (16:34 -0700)]
[IA64] one-line cleanup on set_irq_affinity_info
Calls to set_irq_info in set_irq_affinity_info() is redundant because
irq_affinity mask was set just one line immediately above it. Remove
that duplicate call.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Chen, Kenneth W [Tue, 16 May 2006 23:29:00 +0000 (16:29 -0700)]
[IA64] fix broken irq affinity
When CONFIG_PCI_MSI is set, move_irq() is an empty function, causing
grief when sys admin tries to bind interrupt to CPU.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Jes Sorensen [Mon, 15 May 2006 09:07:54 +0000 (05:07 -0400)]
[IA64] sn2 defconfig
Set node shift to 10 on SN2 and disable mutex debugging.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Angelo P. Castellani [Wed, 17 May 2006 04:42:11 +0000 (21:42 -0700)]
[TCP]: reno sacked_out count fix
From: "Angelo P. Castellani" <angelo.castellani+lkml@gmail.com>
Using NewReno, if a sk_buff is timed out and is accounted as lost_out,
it should also be removed from the sacked_out.
This is necessary because recovery using NewReno fast retransmit could
take up to a lot RTTs and the sk_buff RTO can expire without actually
being really lost.
left_out = sacked_out + lost_out
in_flight = packets_out - left_out + retrans_out
Using NewReno without this patch, on very large network losses,
left_out becames bigger than packets_out + retrans_out (!!).
For this reason unsigned integer in_flight overflows to 2^32 - something.
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Tue, 16 May 2006 22:24:41 +0000 (15:24 -0700)]
[IPV6]: Endian fix in net/ipv6/netfilter/ip6t_eui64.c:match().
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Bunk [Tue, 16 May 2006 22:23:40 +0000 (15:23 -0700)]
[TR]: Remove an unused export.
This patch removes the unused EXPORT_SYMBOL(tr_source_route).
(Note, the usage in net/llc/llc_output.c can't be modular.)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 16 May 2006 22:18:26 +0000 (15:18 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/spi-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/spi-2.6:
[PATCH] SPI: spi_bitbang: clocking fixes
[PATCH] spi: Update to PXA2xx SPI Driver
[PATCH] SPI: busnum == 0 needs to work
[PATCH] SPI: devices can require LSB-first encodings
[PATCH] SPI: Renamed bitbang_transfer_setup to spi_bitbang_setup_transfer and export it
[PATCH] SPI: Add David as the SPI subsystem maintainer
[PATCH] SPI: spi bounce buffer has a minimum length
[PATCH] SPI: spi whitespace fixes
[PATCH] SPI: add PXA2xx SSP SPI Driver
[PATCH] SPI: per-transfer overrides for wordsize and clocking
Alexey Dobriyan [Tue, 16 May 2006 22:17:49 +0000 (15:17 -0700)]
[IPX]: Correct return type of ipx_map_frame_type().
Casting BE16 to int and back may or may not work. Correct, to be sure.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 16 May 2006 22:16:14 +0000 (15:16 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] arch/arm/kernel/dma-isa.c: named initializers
[ARM] 3527/1: MPCore Boot Lockup Fix
[ARM] arch/arm/kernel/process.c: Fix warning
[ARM] 3526/1: ioremap should use vunmap instead of vfree on ARM
[ARM] 3524/1: ARM EABI: more 64-bit aligned stack fixes
[ARM] 3517/1: move definition of PROC_INFO_SZ from procinfo.h to asm-offsets.h
Linus Torvalds [Tue, 16 May 2006 22:15:59 +0000 (15:15 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-serial
* master.kernel.org:/home/rmk/linux-2.6-serial:
[ARM] 3523/1: Serial core pm_state
Alexey Dobriyan [Tue, 16 May 2006 22:07:28 +0000 (15:07 -0700)]
[IPX]: Correct argument type of ipxrtr_delete().
A single caller passes __u32. Inside function "net" is compared with
__u32 (__be32 really, just wasn't annotated).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Tue, 16 May 2006 22:02:12 +0000 (15:02 -0700)]
[PKT_SCHED]: Potential jiffy wrap bug in dev_watchdog().
There is a potential jiffy wraparound bug in the transmit watchdog
that is easily avoided by using time_after().
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Brownell [Fri, 7 Apr 2006 05:25:56 +0000 (22:25 -0700)]
[PATCH] SPI: spi_bitbang: clocking fixes
This fixes two problems triggered by the MMC stack updating clocks:
- SPI masters driver should accept a max clock speed of zero; that's one
convention for marking idle devices. (Presumably that helps controllers
that don't autogate clocks to "off" when not in use.)
- There are more than 1000 nanoseconds per millisecond; setting the clock
down to 125 KHz now works properly.
Showing once again that Zero (http://en.wikipedia.org/wiki/Zero) is still
an inexhaustible number of bugs.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stephen Street [Tue, 28 Mar 2006 22:05:23 +0000 (14:05 -0800)]
[PATCH] spi: Update to PXA2xx SPI Driver
Fix two outstanding issues with the pxa2xx_spi driver:
1) Bad cast in the function u32_writer. Thanks to Henrik Bechmann
2) Adds support for per transfer changes to speed and bits per word
Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Mon, 3 Apr 2006 22:49:04 +0000 (15:49 -0700)]
[PATCH] SPI: busnum == 0 needs to work
We need to be able to have a "SPI bus 0" matching chip numbering; but
that number was wrongly used to flag dynamic allocation of a bus number.
This patch resolves that issue; now negative numbers trigger dynamic alloc.
It also updates the how-to-write-a-controller-driver overview to mention
this stuff.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Mon, 3 Apr 2006 22:46:22 +0000 (15:46 -0700)]
[PATCH] SPI: devices can require LSB-first encodings
Add spi_device hook for LSB-first word encoding, and update all the
(in-tree) controller drivers to reject such devices. Eventually,
some controller drivers will be updated to support lsb-first encodings
on the wire; no current drivers need this.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kumar Gala [Sun, 2 Apr 2006 21:06:35 +0000 (16:06 -0500)]
[PATCH] SPI: Renamed bitbang_transfer_setup to spi_bitbang_setup_transfer and export it
Renamed bitbang_transfer_setup to follow convention of other exported symbols
from spi-bitbang. Exported spi_bitbang_setup_transfer to allow users of
spi-bitbang to use the function in their own setup_transfer.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kumar Gala [Sun, 2 Apr 2006 21:05:54 +0000 (16:05 -0500)]
[PATCH] SPI: Add David as the SPI subsystem maintainer
Add David as the SPI subsystem maintainer
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sun, 2 Apr 2006 18:37:40 +0000 (10:37 -0800)]
[PATCH] SPI: spi bounce buffer has a minimum length
Make sure that spi_write_then_read() can always handle at least 32 bytes
of transfer (total, both directions), minimizing one portability issue.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sun, 2 Apr 2006 18:33:37 +0000 (10:33 -0800)]
[PATCH] SPI: spi whitespace fixes
This removes superfluous whitespace in the <linux/spi/spi.h> header.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stephen Street [Wed, 8 Mar 2006 07:53:24 +0000 (23:53 -0800)]
[PATCH] SPI: add PXA2xx SSP SPI Driver
This driver turns a PXA2xx synchronous serial port (SSP) into a SPI master
controller (see Documentation/spi/spi_summary). The driver has the following
features:
- Support for any PXA2xx SSP
- SSP PIO and SSP DMA data transfers.
- External and Internal (SSPFRM) chip selects.
- Per slave device (chip) configuration.
- Full suspend, freeze, resume support.
Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Imre Deak [Fri, 17 Feb 2006 18:02:18 +0000 (10:02 -0800)]
[PATCH] SPI: per-transfer overrides for wordsize and clocking
Some protocols (like one for some bitmap displays) require different clock
speed or word size settings for each transfer in an SPI message. This adds
those parameters to struct spi_transfer. They are to be used when they are
nonzero; otherwise the defaults from spi_device are to be used.
The patch also adds a setup_transfer callback to spi_bitbang, uses it for
messages that use those overrides, and implements it so that the pure
bitbanging code can help resolve any questions about how it should work.
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adrian Bunk [Tue, 16 May 2006 21:09:46 +0000 (22:09 +0100)]
[ARM] arch/arm/kernel/dma-isa.c: named initializers
This patch converts struct dma_resources to named initializers.
Besides fixing a compile error in -mm, it didn't sound like a bad idea.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Alexander Schulz <alex@shark-linux.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Harry Fearnhamm [Tue, 16 May 2006 15:50:21 +0000 (16:50 +0100)]
[ARM] 3527/1: MPCore Boot Lockup Fix
Patch from Harry Fearnhamm
This patch fixes the occasional lockup seen in early boot stage
on RealView MPCore system.
Signed-off-by: Harry Fearnhamm <Harry.Fearnhamm@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Tue, 16 May 2006 15:46:10 +0000 (08:46 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[PATCH] Fix pSeries identification in prom_init.c
[PATCH] powerpc: fix kernel version display on pseries boxes
Roland Dreier [Mon, 15 May 2006 18:41:00 +0000 (11:41 -0700)]
[PATCH] slab: Fix kmem_cache_destroy() on NUMA
With CONFIG_NUMA set, kmem_cache_destroy() may fail and say "Can't
free all objects." The problem is caused by sequences such as the
following (suppose we are on a NUMA machine with two nodes, 0 and 1):
* Allocate an object from cache on node 0.
* Free the object on node 1. The object is put into node 1's alien
array_cache for node 0.
* Call kmem_cache_destroy(), which ultimately ends up in __cache_shrink().
* __cache_shrink() does drain_cpu_caches(), which loops through all nodes.
For each node it drains the shared array_cache and then handles the
alien array_cache for the other node.
However this means that node 0's shared array_cache will be drained,
and then node 1 will move the contents of its alien[0] array_cache
into that same shared array_cache. node 0's shared array_cache is
never looked at again, so the objects left there will appear to be in
use when __cache_shrink() calls __node_shrink() for node 0. So
__node_shrink() will return 1 and kmem_cache_destroy() will fail.
This patch fixes this by having drain_cpu_caches() do
drain_alien_cache() on every node before it does drain_array() on the
nodes' shared array_caches.
The problem was originally reported by Or Gerlitz <ogerlitz@voltaire.com>.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Mon, 15 May 2006 16:19:47 +0000 (18:19 +0200)]
[PATCH] x86_64: Don't schedule on exception stack on preemptive kernels
Extends an earlier patch from John Blackwood to more exception handlers
that also run on the exception stacks.
Expand the use of preempt_conditional_{sti,cli} to all cases where
interrupts are to be re-enabled during exception handling while running
on an IST stack.
Based on original patch from Jan Beulich.
Cc: John Blackwood <john.blackwood@ccur.com>
Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Mon, 15 May 2006 16:19:44 +0000 (18:19 +0200)]
[PATCH] x86_64: Fix memory hotadd heuristics
This fixes some boot failures on Dell and Unisys systems with memory
hotadd added.
- Set hotadd_percent to 0 by default. This means anybody using hotadd
memory needs to specify the value on the command line. That's
because there are lots of Intel boxes which have a bogus hotplug area
in their SRAT and they would waste a lot of memory before.
- Fix calculation of how much memory to use when the hotplug area
exceeds hotadd_percent
- Fix fallback when the
- Fix fallback if memory hotadd is not compiled in.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Mon, 15 May 2006 16:19:41 +0000 (18:19 +0200)]
[PATCH] i386/x86_64: Force pci=noacpi on HP XW9300
This is needed to see all devices.
The system has multiple PCI segments and we don't handle that properly
yet in PCI and ACPI. Short term before this is fixed blacklist it to
pci=noacpi.
Acked-by: len.brown@intel.com
Cc: gregkh@suse.de
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Mon, 15 May 2006 16:19:38 +0000 (18:19 +0200)]
[PATCH] x86_64: Don't warn for overflow in nommu case when dma_mask is < 32bit
This triggers for b44's 1GB DMA workaround which tries to map
first and then bounces.
The 32bit heuristic is reasonable because the IOMMU doesn't attempt
to handle < 32bit masks anyways.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Mon, 15 May 2006 16:19:35 +0000 (18:19 +0200)]
[PATCH] x86_64: Check for bad dma address in b44 1GB DMA workaround
Needed for interaction with the nommu code in x86-64 which
will return bad_dma_address if the address exceeds dma_mask.
Cc: netdev@vger.kernel.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Benjamin Herrenschmidt [Mon, 15 May 2006 05:46:03 +0000 (15:46 +1000)]
[PATCH] Fix pSeries identification in prom_init.c
The OF trampoline code prom_init.c still needs to identify IBM pSeries
(PAPR) machines in order to run some platform specific code on them like
instanciating the TCE tables. The code doing that detection was changed
recently in 2.6.17 early stages but was done slightly incorrectly. It
should be testing for an exact match of "chrp" and it currently tests
for anything that begins with "chrp". That means it will incorrectly
match with platforms using Maple-like device-trees and have open
firmware. This fixes it by using strcmp instead of strncmp to match what
the actual platform detection code does.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Wed, 10 May 2006 03:05:54 +0000 (13:05 +1000)]
[PATCH] powerpc: fix kernel version display on pseries boxes
We are displaying the wrong thing on the operator panel (2x40
character LCD). This got broken in commit
cebb21b5, when UTS_RELEASE
got changed to system_utsname.version.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Russell King [Tue, 16 May 2006 10:33:15 +0000 (11:33 +0100)]
[ARM] arch/arm/kernel/process.c: Fix warning
arch/arm/kernel/process.c:314: warning: assignment makes integer from pointer without a cast
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Tue, 16 May 2006 10:30:26 +0000 (11:30 +0100)]
[ARM] 3526/1: ioremap should use vunmap instead of vfree on ARM
Patch from Catalin Marinas
This patch modifies the __ioremap_pfn and __iounmap functions in
arch/arm/mm/ioremap.c to use vunmap instead of vfree.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Nicolas Pitre [Tue, 16 May 2006 10:29:46 +0000 (11:29 +0100)]
[ARM] 3524/1: ARM EABI: more 64-bit aligned stack fixes
Patch from Nicolas Pitre
Assembly code that calls C code must ensure the C code sees a 64-bit
aligned stack pointer.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Uwe Zeisberger [Wed, 10 May 2006 17:11:05 +0000 (18:11 +0100)]
[ARM] 3517/1: move definition of PROC_INFO_SZ from procinfo.h to asm-offsets.h
Patch from Uwe Zeisberger
The symbol is only used in arch/arm/kernel/head-common.S. This in turn
is included from arch/arm/kernel/head.S and arch/arm/kernel/head-nommu.S
which include asm-offsets.h .
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Andrew Victor [Tue, 16 May 2006 10:28:49 +0000 (11:28 +0100)]
[ARM] 3523/1: Serial core pm_state
Patch from Andrew Victor
The serial_core already manages the power state of the UARTs, and
therefore it shouldn't suspend a UART which was previously suspended.
This patch modifies serial_core only call the UART-specific
power-management function if the PM state is actually changing.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Wed, 19 Apr 2006 22:02:56 +0000 (23:02 +0100)]
[WATCHDOG] s3c2410_wdt.c stop watchdog after boot
If the s3c2410 watchdog timer is not enabled by
the driver at startup, ensure that it is stopped
in-case the boot process has enabled it.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Wim Van Sebroeck [Sun, 16 Apr 2006 10:52:35 +0000 (12:52 +0200)]
[WATCHDOG] i8xx_tco.c - remove support for ICH6 + ICH7
Temporary remove support for ICH6 + ICH7. In these newer TCO's
the watchdog timer has changed: the TCO_TMR register is not at
the TCOBASE+0x1 offset, but changed it's place to TCOBASE+0x12
and became 10 bit long [0:9]. (Kernel BUG 6031).
ICH6 + ICH7 support will be added in a new driver. Code is
under test.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Randy Dunlap [Wed, 5 Apr 2006 03:17:26 +0000 (20:17 -0700)]
[WATCHDOG] Documentation/watchdog/watchdog-api.txt - fix watchdog daemon
Fix the simple watchdog daemon program in Doc/watchdog/watchdog-api.txt
to build cleanly.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Dave Jones [Mon, 3 Apr 2006 23:04:48 +0000 (16:04 -0700)]
[WATCHDOG] sc1200wdt.c printk fix
Fix printk output.
sc1200wdt: build
20020303<3>sc1200wdt: io parameter must be specified
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Stephen Hemminger [Thu, 11 May 2006 22:07:28 +0000 (15:07 -0700)]
sky2: prevent dual port receiver problems
When both ports are receiving simultaneously, the receive logic gets confused
and may pass up a packet before it is full. This causes hangs, and IP will see
lots of garbage packets. There is even the potential for data corruption if
a later arriving packet DMA's into freed memory.
It looks like a hardware bug because status arrives for a packet but no
data is there. Until this bug is worked out, block the user from bringing
up both ports at once.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Andi Kleen [Mon, 15 May 2006 16:19:35 +0000 (18:19 +0200)]
x86_64: Check for bad dma address in b44 1GB DMA workaround
Needed for interaction with the nommu code in x86-64 which
will return bad_dma_address if the address exceeds dma_mask.
Cc: netdev@vger.kernel.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Lennert Buytenhek [Mon, 15 May 2006 19:25:29 +0000 (12:25 -0700)]
The ixp2000 driver for the enp2611 was developed on a board with
three gigabit ports, but some enp2611 models only have two ports
(and only one onboard PM3386.) The current driver assumes there
are always three ports and so it doesn't work on the two-port
version of the board at all.
This patch adds a bit of logic to the enp2611 driver to limit the
number of ports to 2 if the second PM3386 isn't detected.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Andrew Morton [Mon, 15 May 2006 16:44:43 +0000 (09:44 -0700)]
[PATCH] dl2k needs dma-mapping.h
On alpha:
drivers/net/dl2k.c: In function `rio_free_tx':
drivers/net/dl2k.c:768: error: `DMA_48BIT_MASK' undeclared (first use in this function)
drivers/net/dl2k.c:768: error: (Each undeclared identifier is reported only once
drivers/net/dl2k.c:768: error: for each function it appears in.)
drivers/net/dl2k.c: In function `receive_packet':
drivers/net/dl2k.c:896: error: `DMA_48BIT_MASK' undeclared (first use in this function)
drivers/net/dl2k.c: In function `rio_close':
drivers/net/dl2k.c:1803: error: `DMA_48BIT_MASK' undeclared (first use in this function)
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Mon, 15 May 2006 16:44:42 +0000 (09:44 -0700)]
[PATCH] jffs2 warning fixes
fs/jffs2/nodelist.c: In function `check_node_data':
fs/jffs2/nodelist.c:441: warning: unsigned int format, different type arg (arg 4)
fs/jffs2/nodelist.c:464: warning: int format, different type arg (arg 5)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Peter Osterlund [Mon, 15 May 2006 16:44:40 +0000 (09:44 -0700)]
[PATCH] devices.txt: remove pktcdvd entry
Changing the driver to use dynamic device numbers was one of the many
changes that were made in order to have the driver accepted into the
mainline kernel. Therefore I would say that the entry in devices.txt is
obsolete. This patch removes it.
Signed-off-by: Peter Osterlund <petero2@telia.com>
Cc: Torben Mathiasen <device@lanana.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Thomas Kleffel [Mon, 15 May 2006 16:44:37 +0000 (09:44 -0700)]
[PATCH] ide_cs: Add IBM microdrive to known IDs
Add the IBM microdrive to the known PCMCIA IDs for ide_cs.
Signed-off-by: Thomas Kleffel <tk@maintech.de>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Aneesh Kumar [Mon, 15 May 2006 16:44:36 +0000 (09:44 -0700)]
[PATCH] Fix typos in Documentation/memory-barriers.txt
Fix some typos in Documentation/memory-barriers.txt
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alexey Dobriyan [Mon, 15 May 2006 16:44:35 +0000 (09:44 -0700)]
[PATCH] gigaset: endian fix
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Hansjoerg Lipp <hjlipp@web.de>
Cc: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pavel Machek [Mon, 15 May 2006 16:44:34 +0000 (09:44 -0700)]
[PATCH] fix hotplug kconfig help
HOTPLUG_CPU entry says "Say Y..." then "Say N.". Slightly ugly, so I fixed
it up, and added remark about suspend on SMP as a bonus.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Carl-Daniel Hailfinger [Mon, 15 May 2006 16:44:33 +0000 (09:44 -0700)]
[PATCH] smbus unhiding kills thermal management
Do not enable the SMBus device on Asus boards if suspend is used. We do
not reenable the device on resume, leading to all sorts of undesirable
effects, the worst being a total fan failure after resume on Samsung P35
laptop.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Mon, 15 May 2006 16:44:30 +0000 (09:44 -0700)]
[PATCH] revert "vfs: propagate mnt_flags into do_loopback/vfsmount"
Revert commit
f6422f17d3a480f21917a3895e2a46b968f56a08, due to
Valdis.Kletnieks@vt.edu wrote:
>
> There seems to have been a bug introduced in this changeset:
>
> Am running 2.6.17-rc3-mm1. When this changeset is applied, 'mount --bind'
> misbehaves:
>
> > # mkdir /foo
> > # mount -t tmpfs -o rw,nosuid,nodev,noexec,noatime,nodiratime none /foo
> > # mkdir /foo/bar
> > # mount --bind /foo/bar /foo
> > # tail -2 /proc/mounts
> > none /foo tmpfs rw,nosuid,nodev,noexec,noatime,nodiratime 0 0
> > none /foo tmpfs rw 0 0
>
> Reverting this changeset causes both mounts to have the same options.
>
> (Thanks to Stephen Smalley for tracking down the changeset...)
>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <Valdis.Kletnieks@vt.edu>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andy Whitcroft [Mon, 15 May 2006 16:44:29 +0000 (09:44 -0700)]
[PATCH] root mount failure: emit filesystems attempted
When we fail to mount from a valid root device list out the filesystems we
have tried to mount it with. This gives the user vital diagnostics as to
what is missing from their kernel.
For example in the fragment below the kernel does not have CRAMFS compiled
into the kernel and yet appears to recognise it at the RAMDISK detect
stage. Later the mount fails as we don't have the filesystem.
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 1604KiB [1 disk] into ram disk... done.
XFS: bad magic number
XFS: SB validate failed
No filesystem could mount root, tried: reiserfs ext3 ext2 msdos vfat
iso9660 jfs xfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1)
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>