OSDN Git Service
Ran Sun [Mon, 24 Jul 2023 03:40:33 +0000 (11:40 +0800)]
drm/radeon: that open brace { should be on the previous line
ERROR: that open brace { should be on the previous line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ran Sun [Mon, 24 Jul 2023 03:36:59 +0000 (11:36 +0800)]
drm/radeon: that open brace { should be on the previous line
ERROR: that open brace { should be on the previous line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ran Sun [Mon, 24 Jul 2023 03:30:18 +0000 (11:30 +0800)]
drm/radeon: add missing spaces after ',' and else should follow close brace '}'
ERROR: else should follow close brace '}'
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Tue, 25 Jul 2023 05:30:08 +0000 (11:00 +0530)]
drm/amdgpu: Restore HQD persistent state register
On GFX v9.4.3, compute queue MQD is populated using the values in HQD
persistent state register. Hence don't clear the values on module
unload, instead restore it to the default reset value so that MQD is
initialized correctly during next module load. In particular, preload
flag needs to be set on compute queue MQD, otherwise it could cause
uninitialized values being used at device reset state resulting in EDC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ran Sun [Mon, 24 Jul 2023 03:00:04 +0000 (11:00 +0800)]
drm/radeon: add missing spaces before ';'
ERROR: space required after that ';' (ctx:BxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ran Sun [Mon, 24 Jul 2023 02:55:43 +0000 (10:55 +0800)]
drm/radeon/si_dpm: open brace '{' following struct go on the same line
ERROR: open brace '{' following struct go on the same line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenyou Yang [Wed, 31 May 2023 02:16:47 +0000 (10:16 +0800)]
drm/amd/pm: Vangogh: Add new gpu_metrics_v2_4 to acquire gpu_metrics
To acquire the voltage and current info from gpu_metrics interface,
but gpu_metrics_v2_3 doesn't contain them, and to be backward compatible,
add new gpu_metrics_v2_4 structure.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Wenyou Yang <WenYou.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YuanShang [Fri, 30 Jun 2023 08:40:28 +0000 (16:40 +0800)]
drm/amdgpu: load sdma ucode in the guest machine
[why]
User mode driver need to check the sdma ucode version to
see whether the sdma engine supports a new type of PM4 packet.
In SRIOV, sdma is loaded by the host. And, there is no way
to check the sdma ucode version of CHIP_NAVI12 and
CHIP_SIENNA_CICHLID of the host in the guest machine.
[how]
Load the sdma ucode for CHIP_NAVI12 and CHIP_SIENNA_CICHLID
in the guest machine.
Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-By: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Sun, 23 Jul 2023 06:49:26 +0000 (12:19 +0530)]
drm/amdgpu: Use seq_puts() instead of seq_printf()
For a constant format without additional arguments, use seq_puts()
instead of seq_printf(). Also, it fixes the following warning.
WARNING: Prefer seq_puts to seq_printf
And other style fixes:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Block comments should align the * on each line
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Sun, 23 Jul 2023 06:59:14 +0000 (12:29 +0530)]
drm/amdgpu: Update min() to min_t() in 'amdgpu_info_ioctl'
Fixes the following:
WARNING: min() should probably be min_t(size_t, size, sizeof(ip))
+ ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip)));
And other style fixes:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Sun, 23 Jul 2023 06:34:13 +0000 (12:04 +0530)]
drm/amdgpu: Remove else after return in 'is_fru_eeprom_supported'
Expressions under 'else' branch under case 'CHIP_SIENNA_CICHLID' in
function 'is_fru_eeprom_supported' are executed whenever the expression
in 'if' is False. Otherwise, return from case occurs. Therefore, there
is no need in 'else', and it has been removed.
Fixes the following:
WARNING: else is not generally useful after a break or return
+ return false;
+ } else {
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Sun, 23 Jul 2023 09:22:09 +0000 (14:52 +0530)]
drm/amd/display: Remove else after return in 'dm_vblank_get_counter' & 'amdgpu_dm_backlight_get_level'
Expressions under 'else' branch in function 'dm_vblank_get_counter' &
'amdgpu_dm_backlight_get_level' are executed whenever the expression in
'if' is False. Otherwise, return from function occurs. Therefore, there is
no need in 'else', and it has been removed.
Fixes the following:
WARNING: else is not generally useful after a break or return
+ return 0;
+ else {
WARNING: else is not generally useful after a break or return
+ return convert_brightness_to_user(&caps, avg);
+ } else {
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Sun, 23 Jul 2023 09:46:10 +0000 (15:16 +0530)]
drm/amdgpu: Add -ENOMEM error handling when there is no memory
Return -ENOMEM, when there is no sufficient dynamically allocated memory
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Fri, 21 Jul 2023 08:38:02 +0000 (16:38 +0800)]
drm/amdgpu: Check APU flag to disable RAS
Only disable RAS by default for aqua vanjaram on APU platform.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shiwu Zhang [Thu, 20 Jul 2023 07:25:15 +0000 (15:25 +0800)]
drm/amdgpu: fix the indexing issue during rlcg access ctrl init
In case that the GET_INST() is used for looping, only loops for the
times of actual num of xcc, otherwise GET_INST() will return the invalid
index, a.k.a -1
And also remove the redundant mask checking in case of GET_INST()
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pierre-Eric Pelloux-Prayer [Wed, 21 Jun 2023 08:42:07 +0000 (10:42 +0200)]
drm/amdgpu: add VISIBLE info in amdgpu_bo_print_info
This allows tools to distinguish between VRAM and visible VRAM.
Use the opportunity to fix locking before accessing bo.
v2: squash in unused variable fix
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Sierra [Wed, 19 Jul 2023 21:20:58 +0000 (16:20 -0500)]
drm/amdkfd: avoid svm dump when dynamic debug disabled
Set dynamic_svm_range_dump macro to avoid iterating over SVM lists
from svm_range_debug_dump when dynamic debug is disabled. Otherwise,
it could drop performance, specially with big number of SVM ranges.
Make sure both svm_range_set_attr and svm_range_debug_dump functions
are dynamically enabled to print svm_range_debug_dump debug traces.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Tested-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ran Sun [Fri, 21 Jul 2023 06:10:32 +0000 (06:10 +0000)]
drm/radeon: ERROR: "foo * bar" should be "foo *bar"
Fix two occurrences of the checkpatch.pl error:
ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ran Sun [Fri, 21 Jul 2023 03:32:06 +0000 (11:32 +0800)]
drm/amdgpu: open brace '{' following struct go on the same line
ERROR: open brace '{' following struct go on the same line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ran Sun [Fri, 21 Jul 2023 03:27:18 +0000 (11:27 +0800)]
drm/amd/pm: open brace '{' following struct go on the same line
ERROR: open brace '{' following struct go on the same line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ran Sun [Fri, 21 Jul 2023 01:31:10 +0000 (09:31 +0800)]
drm/amd: open brace '{' following struct go on the same line
Fix the checkpatch error as open brace '{' following struct should
go on the same line.
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Fri, 21 Jul 2023 14:55:49 +0000 (17:55 +0300)]
drm/amd/display: Unlock on error path in dm_handle_mst_sideband_msg_ready_event()
This error path needs to unlock the "aconnector->handle_mst_msg_ready"
mutex before returning.
Fixes:
bb4fa525f327 ("drm/amd/display: Add polling method to handle MST reply packet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 17 Jul 2023 05:36:42 +0000 (01:36 -0400)]
drm/amd/display: 3.2.244
This version brings along following fixes:
- Fix underflow issue on 175hz timing
- Add interface to modify DMUB panel power options
- Remove check for default eDP panel_mode
- Add new sequence for 4-lane HBR3 on vendor specific retimers
- Update DPG test pattern programming
- Correct unit conversion for vstartup
- Exit idle optimizations before attempt to access PHY
- Refactor recout calculation with a more generic formula
- Read down-spread percentage from lut to adjust dprefclk.
- Don't apply FIFO resync W/A if rdivider = 0
- Prevent invalid pipe connections
- Rearrange dmub_cmd defs order
- Add VESA SCR case for default aux backlight
- Guard DCN31 PHYD32CLK logic against chip family
- Correct grammar mistakes
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Ma [Thu, 6 Jul 2023 20:17:03 +0000 (16:17 -0400)]
drm/amd/display: Fix underflow issue on 175hz timing
[Why]
Screen underflows happen on 175hz timing for 3 plane overlay case.
[How]
Based on dst y prefetch value clamp to equ or oto for bandwidth
calculation.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paul Hsieh [Tue, 11 Jul 2023 08:07:52 +0000 (16:07 +0800)]
drm/amd/display: Add interface to modify DMUB panel power options
[Why]
This option can vary depending on the panel and may be required to be
called during sink detection phase before transmitter control.
[How]
Allow modify the bit depending on the eDP panel connected with a new
interface.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Mon, 17 Jul 2023 01:16:35 +0000 (21:16 -0400)]
drm/amd/display: Rearrange dmub_cmd defs order
- Rearranged defs order
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Fri, 14 Jul 2023 16:59:06 +0000 (12:59 -0400)]
drm/amd/display: Remove check for default eDP panel_mode
[Why]
DPCD read is skipped first time after driver initialization.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Fri, 21 Jul 2023 08:33:53 +0000 (14:03 +0530)]
drm/amdgpu: Fix style issues in amdgpu_gem.c
Fixes the following to align to linux coding style:
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Missing a blank line after declarations
ERROR: space prohibited before that close parenthesis ')'
WARNING: unnecessary whitespace before a quoted newline
WARNING: %LX is non-standard C, use %llX
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ovidiu Bunea [Fri, 14 Jul 2023 16:00:16 +0000 (12:00 -0400)]
drm/amd/display: Add new sequence for 4-lane HBR3 on vendor specific retimers
[Why]
In some vendor specific retimer setups for downstream 4-lane HBR3
configuration, the sink will show severe corruption (horizontal shifting)
and intermittent blanking.
[How]
Add new retimer programming sequence before clock recovery when 4 lanes
are active.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 13 Jul 2023 22:40:51 +0000 (18:40 -0400)]
drm/amd/display: Update DPG test pattern programming
[Why]
Last ODM slice could be slightly larger than other slice because it can be
including the residual.
[How]
Update DPG pattern programming sequence to use a different width for
last odm slice.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reza Amini [Fri, 14 Jul 2023 14:43:05 +0000 (10:43 -0400)]
drm/amd/display: Correct unit conversion for vstartup
[Why]
vstartup is calculated to be a large number. It works because
it is within vertical blank, but it reduces region of blank that
can be used for power gating.
[How]
Calculation needs to convert micro seconds to number of
vertical lines.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Chen [Wed, 12 Jul 2023 20:50:15 +0000 (16:50 -0400)]
drm/amd/display: Exit idle optimizations before attempt to access PHY
[Why & How]
DMUB may hang when powering down pixel clocks due to no dprefclk.
It is fixed by exiting idle optimization before the attempt to access PHY.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 6 Jul 2023 19:00:11 +0000 (15:00 -0400)]
drm/amd/display: Refactor recout calculation with a more generic formula
[Why]
Current recout calculation has a few assumptions and implementation
for MPO + ODM combine calculation is very specific. The equation has
too many cases without enough comments to document the detail.
[How]
The change remove the following assumptions:
1. When MPO is enabled, we only allow ODM Combine 2:1
2. ODM Combine always has even segment width.
3. Secondary MPO plane's pipe_ctx copies pre_odm_pipe from
its top pipe.
The change applies a generic formula with more details in comment to
document this solution so it is eaiser to learn and debug later.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Tsai [Thu, 13 Jul 2023 01:54:51 +0000 (09:54 +0800)]
drm/amd/display: Read down-spread percentage from lut to adjust dprefclk.
[Why]
Panels show corruption with high refresh rate timings when
ss is enabled.
[How]
Read down-spread percentage from lut to adjust dprefclk.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Wed, 12 Jul 2023 21:22:25 +0000 (17:22 -0400)]
drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0
[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).
Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ethan Bitnun [Wed, 12 Jul 2023 19:44:00 +0000 (15:44 -0400)]
drm/amd/display: Prevent invalid pipe connections
[Description]
- Prevent ODM pipe connections between pipes that are not part
of the same plane when adding a plane to context
- Re-attach child pipes of ODM slice about to be disconnected
to prevent any lost pipes with invalid tops/bottoms
- We cannot split if head_pipe is not in ODM. Preventing this
avoids creating an invalid context with an invalid pipe.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Bitnun <ethan.bitnun@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Tue, 18 Jul 2023 12:11:45 +0000 (17:41 +0530)]
drm/amdgpu: Update ring scheduler info as needed
Not all rings have scheduler associated. Only update scheduler data for
rings with scheduler. It could result in out of bound access as total
rings are more than those associated with particular IPs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sguttula [Fri, 14 Jul 2023 09:12:16 +0000 (14:42 +0530)]
drm/amdgpu: Enabling FW workaround through shared memory for VCN4_0_2
This patch will enable VCN FW workaround using
DRM KEY INJECT WORKAROUND method,
which is helping in fixing the secure playback.
Signed-off-by: sguttula <Suresh.Guttula@amd.com>
Reviewed-by: Leo Liu <leo.liiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Iswara Nagulendran [Mon, 10 Jul 2023 18:01:35 +0000 (14:01 -0400)]
drm/amd/display: Add VESA SCR case for default aux backlight
[How & Why]
When determining default aux backlight level, read from
DPCD address 0x734 for VESA SCR on OLED.
Reviewed-by: Felipe Clark <felipe.clark@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Thu, 20 Jul 2023 10:09:24 +0000 (15:39 +0530)]
drm/radeon: Prefer dev_* variant over printk
Changed from pr_err/info to dev_* variants so that
we get better debug info when there are multiple GPUs
in the system.
Fixes:
09edeb4c1680 ("drm/radeon: Prefer pr_err/_info over printk")
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Sat, 15 Jul 2023 05:42:20 +0000 (11:12 +0530)]
drm/radeon: Fix style issues in radeon _encoders.c & _gart.c
Conform to Linux kernel coding style.
Fixes the following & other checks in radeon_encoders.c & radeon_gart.c:
WARNING: Missing a blank line after declarations
WARNING: Block comments use * on subsequent lines
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for single statement blocks
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Tue, 18 Jul 2023 06:58:37 +0000 (12:28 +0530)]
drm/amd/amdgpu: Fix warnings in amdgpu/amdgpu_display.c
Fixes the below checkpatch.pl warnings:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
WARNING: suspect code indent for conditional statements (8, 12)
WARNING: braces {} are not necessary for single statement blocks
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Sat, 15 Jul 2023 05:14:16 +0000 (10:44 +0530)]
drm/radeon: Avoid externs & do not initialize globals to 0 in radeon_drv.c
Fixes the following:
- WARNING: externs should be avoided in .c files
- ERROR: do not initialise globals to 0
- WARNING: Missing a blank line after declarations
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Tue, 11 Jul 2023 17:22:36 +0000 (13:22 -0400)]
drm/amd/display: Guard DCN31 PHYD32CLK logic against chip family
[Why]
Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other
ASICs.
[How]
Add guard to check chip family is yellow carp before applying logic.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reza Amini [Mon, 10 Jul 2023 17:59:22 +0000 (13:59 -0400)]
drm/amd/display: Correct grammar mistakes
[Why]
There are grammer mistakes in comments
[How]
Correct grammar mistakes
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Fri, 21 Jul 2023 09:12:10 +0000 (14:42 +0530)]
drm/amdgpu: Return -ENOMEM when there is no memory in 'amdgpu_gfx_mqd_sw_init'
Return -ENOMEM, when there is no sufficient dynamically allocated memory
to create MQD backup for ring
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Fri, 21 Jul 2023 08:10:07 +0000 (13:40 +0530)]
drm/amdgpu: Fix do not add new typedefs in amdgpu_fw_attestation.c
Fixes the following to align to coding style:
WARNING: do not add new typedefs
+typedef struct FW_ATT_DB_HEADER
WARNING: do not add new typedefs
+typedef struct FW_ATT_RECORD
WARNING: Symbolic permissions 'S_IRUSR' are not preferred. Consider using octal permissions '0400'.
+ S_IRUSR,
ERROR: "(foo*)" should be "(foo *)"
WARNING: please, no space before tabs
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Fri, 21 Jul 2023 07:45:41 +0000 (13:15 +0530)]
drm/amdgpu: Prefer #if IS_ENABLED over #if defined in amdgpu_drv.c
Adhere to linux coding style
Fixes the following:
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Wed, 12 Jul 2023 20:58:55 +0000 (16:58 -0400)]
drm/amdkfd: enable cooperative groups for gfx11
MES can concurrently schedule queues on the device that require
exclusive device access if marked exclusively_scheduled without the
requirement of GWS. Similar to the F32 HWS, MES will manage
quality of service for these queues.
Use this for cooperative groups since cooperative groups are device
occupancy limited.
Since some GFX11 devices can only be debugged with partial CUs, do not
allow the debugging of cooperative groups on these devices as the CU
occupancy limit will change on attach.
In addition, zero initialize the MES add queue submission vector for MES
initialization tests as we do not want these to be cooperative
dispatches.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Horace Chen [Wed, 19 Jul 2023 07:55:04 +0000 (15:55 +0800)]
drm/amdgpu: set sw state to gfxoff after SR-IOV reset
[Why]
Current SR-IOV will not set GC to off state, while it is a real
GC hard reset. Whthout GFX off flag, driver may do gfxhub invalidation
before firmware load and gfxhub gart enable. This operation may cause
CP to become busy because GC is not in the right state for invalidation.
[How]
Add a function for SR-IOV to clean up some sw state before recover. Set
adev->gfx.is_poweron to false to prevent gfxhub invalidation before gfx
firmware autoload complete.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: HaiJun Chang <HaiJun.Chang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jane Jian [Thu, 20 Jul 2023 10:08:07 +0000 (18:08 +0800)]
drm/amd/smu: use AverageGfxclkFrequency* to replace previous GFX Curr Clock
Report current GFX clock also from average clock value as the original
CurrClock data is not valid/accurate any more as per FW team
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Li [Thu, 20 Jul 2023 01:05:14 +0000 (09:05 +0800)]
drm/amdgpu: Fix one kernel-doc comment
Use colon to separate parameter name from their specific meaning.
silence the warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c:793: warning: Function parameter or member 'adev' not described in 'amdgpu_vm_pte_update_noretry_flags'
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Thu, 13 Jul 2023 05:14:59 +0000 (00:14 -0500)]
drm/amd: Fix an error handling mistake in psp_sw_init()
If the second call to amdgpu_bo_create_kernel() fails, the memory
allocated from the first call should be cleared. If the third call
fails, the memory from the second call should be cleared.
Fixes:
b95b5391684b ("drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Tue, 18 Jul 2023 18:31:58 +0000 (14:31 -0400)]
drm/amdgpu: Fix infinite loop in gfxhub_v1_2_xcc_gart_enable (v2)
An instance of for_each_inst() was not changed to match its new
behaviour and is causing a loop.
v2: remove tmp_mask variable
Fixes:
b579ea632fca ("drm/amdgpu: Modify for_each_inst macro")
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Thu, 20 Jul 2023 05:50:43 +0000 (11:20 +0530)]
drm/amdgpu: Program xcp_ctl registers as needed
XCP_CTL register is expected to be programmed by firmware. Under certain
conditions FW may not have programmed it correctly. As a workaround,
program it when FW has not programmed the right values.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Wed, 12 Jul 2023 20:32:29 +0000 (16:32 -0400)]
drm/amdkfd: fix trap handling work around for debugging
Update the list of devices that require the cwsr trap handling
workaround for debugging use cases.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Ruili Ji <ruili.ji@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samuel Holland [Mon, 17 Jul 2023 22:29:23 +0000 (15:29 -0700)]
drm/amd/display: Allow building DC with clang on RISC-V
clang on RISC-V appears to be unaffected by the bug causing excessive
stack usage in calculate_bandwidth(). clang 16 with -fstack-usage
reports a 304 byte stack frame size with CONFIG_ARCH_RV32I, and 512
bytes with CONFIG_ARCH_RV64I.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Mon, 17 Jul 2023 20:57:44 +0000 (16:57 -0400)]
drm/amd/display: remove an unused file
[Why&How]
Internal subvp state is not referenced in driver code, so it can be removed.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Wed, 19 Jul 2023 11:01:48 +0000 (16:31 +0530)]
drm/radeon: Prefer pr_err/_info over printk
Fixes the following checkpatch.pl:
WARNING: printk() should include KERN_<LEVEL> facility level
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sguttula [Fri, 14 Jul 2023 08:47:52 +0000 (14:17 +0530)]
drm/amdgpu: allow secure submission on VCN4 ring
This patch will enable secure decode playback on VCN4_0_2
Signed-off-by: sguttula <Suresh.Guttula@amd.com>
Reviewed-by: Leo Liu <leo.liiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Jul 2023 18:02:58 +0000 (13:02 -0500)]
drm/amd: Avoid reading the VBIOS part number twice
The VBIOS part number is read both in amdgpu_atom_parse() as well
as in atom_get_vbios_pn() and stored twice in the `struct atom_context`
structure. Remove the first unnecessary read and move the `pr_info`
line from that read into the second.
v2: squash in unused variable removal
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Fri, 14 Jul 2023 11:38:16 +0000 (19:38 +0800)]
drm/amdgpu: use a macro to define no xcp partition case
~0 as no xcp partition is used in several places, so improve its
definition by a macro for code consistency.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Thu, 13 Jul 2023 07:55:58 +0000 (15:55 +0800)]
drm/amdgpu/vm: use the same xcp_id from root PD
Other PDs/PTs allocation should just use the same xcp_id as that
stored in root PD.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Thu, 13 Jul 2023 07:09:37 +0000 (15:09 +0800)]
drm/amdgpu: fix slab-out-of-bounds issue in amdgpu_vm_pt_create
Recent code set xcp_id stored from file private data when opening
device to amdgpu bo for accounting memory usage etc, but not all
VMs are attached to this fpriv structure like the vm cases in
amdgpu_mes_self_test, otherwise, KASAN will complain below out
of bound access. And more importantly, VM code should not touch
fpriv structure, so drop fpriv code handling from amdgpu_vm_pt.
[ 77.292314] BUG: KASAN: slab-out-of-bounds in amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.293845] Read of size 4 at addr
ffff888102c48a48 by task modprobe/1069
[ 77.294146] Call Trace:
[ 77.294178] <TASK>
[ 77.294208] dump_stack_lvl+0x49/0x63
[ 77.294260] print_report+0x16f/0x4a6
[ 77.294307] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.295979] ? kasan_complete_mode_report_info+0x3c/0x200
[ 77.296057] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.297556] kasan_report+0xb4/0x130
[ 77.297609] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.299202] __asan_load4+0x6f/0x90
[ 77.299272] amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.300796] ? amdgpu_init+0x6e/0x1000 [amdgpu]
[ 77.302222] ? amdgpu_vm_pt_clear+0x750/0x750 [amdgpu]
[ 77.303721] ? preempt_count_sub+0x18/0xc0
[ 77.303786] amdgpu_vm_init+0x39e/0x870 [amdgpu]
[ 77.305186] ? amdgpu_vm_wait_idle+0x90/0x90 [amdgpu]
[ 77.306683] ? kasan_set_track+0x25/0x30
[ 77.306737] ? kasan_save_alloc_info+0x1b/0x30
[ 77.306795] ? __kasan_kmalloc+0x87/0xa0
[ 77.306852] amdgpu_mes_self_test+0x169/0x620 [amdgpu]
v2: without specifying xcp partition for PD/PT bo, the xcp id is -1.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2686
Fixes:
3ebfd221c1a8 ("drm/amdkfd: Store xcp partition id to amdgpu bo")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Mon, 17 Jul 2023 01:55:07 +0000 (09:55 +0800)]
drm/amdgpu: Allocate root PD on correct partition
file_priv needs to be setup firstly, otherwise, root PD
will always be allocated on partition 0, even if opening
the device from other partitions.
Fixes:
3ebfd221c1a8 ("drm/amdkfd: Store xcp partition id to amdgpu bo")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Fri, 16 Jun 2023 15:01:59 +0000 (11:01 -0400)]
drm/amdgpu: Add RLCG interface driver implementation for gfx v9.4.3 (v3)
Add RLCG interface support for gfx v9.4.3 and multiple XCCs.
Do not enable it yet.
v2: Fix amdgpu_rlcg_reg_access_ctrl init, add support for multiple XCCs
in amdgpu_mm_wreg_mmio_rlc
v3: Use GET_INST() when indexing amdgpu_rlcg_reg_access_ctrl
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 10 Jul 2023 04:15:52 +0000 (00:15 -0400)]
drm/amd/display: Promote DAL to 3.2.243
This version brings along following fixes:
- Update 128b/132b downspread factor to 0.3%
- Add helpers to get DMUB FW boot options
- Initialize necessary uninitialized variables
- Add stream overhead in BW calculations for 128b/132b
- Add link encoding to timing BW calculation parameters
- Prevent vtotal from being set to 0
- Fix race condition when turning off an output alone
- Keep PHY active for DP displays on DCN31
- Fix ASIC check in aux timeout workaround
- ABM pause toggle
- Add missing triggers for full updates
- Disable MPC split by default on special asic
- Add additional refresh rate conditions for SubVP cases
- Fix DP2 link training failure with RCO
- Reenable all root clock gating options
- Cache backlight_millinits in link structure and setting brightness accordingly
- Refine to decide the verified link setting
- Update SW cursor fallback for subvp high refresh
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 4 Jul 2023 15:11:30 +0000 (11:11 -0400)]
drm/amd/display: Add missing triggers for full updates
[Description]
- Full update was missed for the following cases:
- Idle optimization is enabled
- Plane is not in current context
- Also don't clear surface updates at end of
commit_plane_for_stream_fast as they are cleared at
the beginning of each flip (only stream updates need
to be cleared in case there is no stream update in
the next flip)
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reza Amini [Mon, 26 Jun 2023 18:50:01 +0000 (14:50 -0400)]
drm/amd/display: ABM pause toggle
[why]
Allow ABM states to be transferred across display
adapters for smooth display transitions.
[how]
We call DMUB to pause and get ABM states. We
transfer data to other gpu, and deliver data and
ask ABM to un-pause.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Thu, 29 Jun 2023 19:04:09 +0000 (15:04 -0400)]
drm/amd/display: Fix ASIC check in aux timeout workaround
[Why]
Aux write was meant to be ASIC specific, and is
causing compliance failures on newer parts.
[How]
Make workaround specific to single ASIC.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 29 Jun 2023 14:35:59 +0000 (10:35 -0400)]
drm/amd/display: Keep PHY active for DP displays on DCN31
[Why & How]
Port of a change that went into DCN314 to keep the PHY enabled
when we have a connected and active DP display.
The PHY can hang if PHY refclk is disabled inadvertently.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Miess [Thu, 22 Jun 2023 12:11:48 +0000 (08:11 -0400)]
drm/amd/display: Prevent vtotal from being set to 0
[Why]
In dcn314 DML the destination pipe vtotal was being set
to the crtc adjustment vtotal_min value even in cases
where that value is 0.
[How]
Only set vtotal to the crtc adjustment vtotal_min value
in cases where the value is non-zero.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Sat, 17 Jun 2023 02:35:46 +0000 (22:35 -0400)]
drm/amd/display: Add link encoding to timing BW calculation parameters
[Why]
There certain cases where the timing BW is dependent on the type of link
encoding in use. Thus to calculate the correct BW required for a given
timing, the link encoding should be added as a parameter.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Tue, 11 Apr 2023 00:00:46 +0000 (20:00 -0400)]
drm/amd/display: Add stream overhead in BW calculations for 128b/132b
[Why]
Current BW calculations do not account for the additional padding added
for uncompressed pixel-to-symbol packing.
This results in X.Y being too low for 128b/132b SST streams in certain
scenarios. If X.Y is too low, end user can observe image corruption.
[How]
Add function to calculate stream overhead to timing BW calculation for
128b/132b SST cases.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Meera Patel [Tue, 27 Jun 2023 15:10:04 +0000 (11:10 -0400)]
drm/amd/display: Initialize necessary uninitialized variables
This commit initializes uninitialized variables.
For some compilers uninitialized variable warnings are treated as Error.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Meera Patel <meera.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cruise Hung [Wed, 21 Jun 2023 09:11:53 +0000 (17:11 +0800)]
drm/amd/display: Add helpers to get DMUB FW boot options
[Why & How]
To query the bits and print them out for debug purposes.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Cruise Hung <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 26 Jun 2023 01:40:57 +0000 (21:40 -0400)]
drm/amd/display: Promote DAL to 3.2.242
This version brings along following fixes:
- Setup stream encoder before link enable for TMDS
- Use is_dig_enable function instead of dcn10 hardcode
- Re-add aux intercept disable delay generically for 2+ LTTPRs
- Add polling method to handle MST reply packet
- Remove unused function
- Improve the include of header file
- Add missing static
- Hardcode vco_freq for dcn316
- Reduce stack size
- Skip enabling DMCUB when using emulation
- Check TG is non-null before checking if enabled
- Update scaler recout data for visual confirm
- Skip querying caps when DMCUB emulation is in use
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhikai Zhai [Fri, 30 Jun 2023 03:35:14 +0000 (11:35 +0800)]
drm/amd/display: Disable MPC split by default on special asic
[WHY]
All of pipes will be used when the MPC split enable on the dcn
which just has 2 pipes. Then MPO enter will trigger the minimal
transition which need programe dcn from 2 pipes MPC split to 2
pipes MPO. This action will cause lag if happen frequently.
[HOW]
Disable the MPC split for the platform which dcn resource is limited
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Wed, 14 Jun 2023 21:53:16 +0000 (17:53 -0400)]
drm/amd/display: Update 128b/132b downspread factor to 0.3%
[Why]
Updating downspread factor to 0.3% to add additional margin to account
for potential link rate deviations (up to 300ppm as per the DP spec).
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alan Liu [Tue, 27 Jun 2023 04:21:51 +0000 (12:21 +0800)]
drm/amd/display: Fix race condition when turning off an output alone
[Why]
When 2 threads are doing commit_tail parallelly, one thread could
commit new streams to dc state but another thread remove it from dc
right away.
[How]
If we don't have new dm state change from commit_check, then we should
not call dc_commit_streams() in commit_tail. A new function
amdgpu_dm_commit_streams() is introduced to refator dc_commit_stream()
adjacent code and fix this issue.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Thu, 29 Jun 2023 21:02:42 +0000 (17:02 -0400)]
drm/amd/display: add additional refresh rate conditions for SubVP cases
[Why]
Want to further constrain these refresh rate conditions for SubVP:
- SubVP + SubVP: either both <= 120Hz or both between 120-165Hz
- SubVP + DRR: SubVP <= 120Hz
- SubVP + VBlank: SubVP <= 120Hz
[How]
Add constraints in subvp_subvp_admissable(),
dcn32_subvp_drr_admissable() and dcn32_subvp_vblank_admissable()
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhikai Zhai [Fri, 30 Jun 2023 05:56:04 +0000 (13:56 +0800)]
drm/amd/display: refine to decide the verified link setting
[WHY]
We return false by default when link training fail at link loss.
It will cause we get a fail verified link caps directly.
[HOW]
Record the highest verified link caps. Use the recorded value as
the verified link caps if it is not successful in the last attempt
to avoid to use the lowest link setting.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Miess [Wed, 28 Jun 2023 16:39:04 +0000 (12:39 -0400)]
drm/amd/display: Fix DP2 link training failure with RCO
[Why]
When RCO is enabled for symclk32_le we get failures during
DP2 link traing compliance tests.
[How]
Break out symclk32_le RCO into a separate function that is
called for hpo when link is enabled/disabled.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Susanto [Tue, 27 Jun 2023 18:36:49 +0000 (14:36 -0400)]
drm/amd/display: Cache backlight_millinits in link structure and setting brightness accordingly
[Why]
Need to save the cached backlight level so that display lights up using
appropriate brightness level instead of the default brightness when
waking up from s0i3.
[How]
Adding a backlight level cache in link structure. Also instead on
calling set_default_brightness_aux, check if cached values exists.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Miess [Wed, 28 Jun 2023 16:42:51 +0000 (12:42 -0400)]
drm/amd/display: Reenable all root clock gating options
[Why & How]
Re-enable all RCO options now that all known issues with
RCO have been addressed
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 7 Jul 2023 16:26:04 +0000 (12:26 -0400)]
drm/amd/display: Update SW cursor fallback for subvp high refresh
[Description]
Since SubVP high refresh is now enabled, we must
fallback to SW cursor under if we're in a SubVP
high refresh config
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 22 Jun 2023 20:14:22 +0000 (16:14 -0400)]
drm/amd/display: Skip querying caps when DMCUB emulation is in use
[Why]
Workaround to avoid accessing DMCUB state too early if the emulator
is in use - we don't support any of the features the caps are querying
with emulation anyway.
[How]
Guard the query if emulation is in use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Ma [Tue, 28 Mar 2023 20:26:29 +0000 (16:26 -0400)]
drm/amd/display: Update scaler recout data for visual confirm
[Why]
Visual confirm color is not as expected for Autoa Color Management
feature test.
[How]
Calculate scaler recout data when visual confirm enabled to update
the visual confirm bar on the display.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Tue, 20 Jun 2023 21:00:28 +0000 (17:00 -0400)]
drm/amd/display: check TG is non-null before checking if enabled
[Why & How]
If there is no TG allocation we can dereference a NULL pointer when
checking if the TG is enabled.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Thu, 22 Jun 2023 18:55:03 +0000 (14:55 -0400)]
drm/amd/display: Skip enabling DMCUB when using emulation
[Why & How]
Shouldn't be touching path for HW DMCUB when emulating.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Wed, 21 Jun 2023 22:30:07 +0000 (16:30 -0600)]
drm/amd/display: Reduce stack size
Reduce stack size pointed by clang:
amdgpu_dm/amdgpu_dm.c:8655:13: error: stack frame size (1048) exceeds limit (1024) in 'amdgpu_dm_atomic_commit_tail' [-Werror,-Wframe-larger-than]
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alan Liu [Wed, 21 Jun 2023 21:53:35 +0000 (15:53 -0600)]
drm/amd/display: Hardcode vco_freq for dcn316
There is no need to calculate the VCO frequency. In our internal branch
we've hard-coded this for a while, so it's well-tested. This also allows
us to remove the now unused code for calculating the VCO frequency.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Thu, 15 Jun 2023 17:57:16 +0000 (11:57 -0600)]
drm/amd/display: Add missing static
After enable DRM_AMDGPU_WERROR, clang highlight multiple functions that
need to have `static`, and this commit address those issues and also
improve the indents.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Thu, 15 Jun 2023 16:53:39 +0000 (10:53 -0600)]
drm/amd/display: Remove unused function
The get_engine_type is never used in the code, for this reason, this
commit drops this function.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Thu, 15 Jun 2023 16:38:59 +0000 (10:38 -0600)]
drm/amd/display: Improve the include of header file
This commit improves the include of some header files to make them align
with other includes.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Wed, 9 Mar 2022 09:05:05 +0000 (17:05 +0800)]
drm/amd/display: Add polling method to handle MST reply packet
[Why]
Specific TBT4 dock doesn't send out short HPD to notify source
that IRQ event DOWN_REP_MSG_RDY is set. Which violates the spec
and cause source can't send out streams to mst sinks.
[How]
To cover this misbehavior, add an additional polling method to detect
DOWN_REP_MSG_RDY is set. HPD driven handling method is still kept.
Just hook up our handler to drm mgr->cbs->poll_hpd_irq().
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Mon, 12 Jun 2023 14:27:09 +0000 (10:27 -0400)]
drm/amd/display: Re-add aux intercept disable delay generically for 2+ LTTPRs
[WHY]
Issue not display generic, required for multiple 2+ LTTPR link configurations.
[HOW]
Revert monitor patch change and remove delay for single LTTPR case
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 15 Jun 2023 15:12:33 +0000 (11:12 -0400)]
drm/amd/display: Use is_dig_enable function instead of dcn10 hardcode
[Why]
This can differ depending on ASIC and we can end up skipping all
transmitter control if we're relying on the wrong bit as a shortcut
for whether link is on/off.
[How]
The ASIC table itself provides the correct DIG check, use that instead
of the dcn10 hardcode.
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
JinZe Xu [Tue, 20 Jun 2023 15:31:00 +0000 (08:31 -0700)]
drm/amd/display: Setup stream encoder before link enable for TMDS
[Why]
HDMI spec requires TMDS clock to be not more than 340MHz. Stream encoder ensure
this requirement but driver enable stream encoder later than PHY. So PHY will
output full speed TMDS clock first.
[How]
Enable stream encoder first in TMDS case.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: JinZe Xu <jinze.xu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shashank Sharma [Fri, 14 Jul 2023 13:05:44 +0000 (15:05 +0200)]
drm/amdgpu: create a new file for doorbell manager
This patch:
- creates a new file for doorbell management.
- moves doorbell code from amdgpu_device.c to this file.
V2:
- remove doc from function declaration (Christian)
- remove 'device' from function names to make it consistent (Alex)
- add SPDX license identifier (Luben)
V3:
- change license to MIT license(Christian)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>