OSDN Git Service
Olof Johansson [Mon, 30 Jan 2017 05:19:26 +0000 (21:19 -0800)]
Merge tag 'samsung-dt-4.11-2' of git://git./linux/kernel/git/krzk/linux into next/dt
Samsung DeviceTree update for v4.11, second round:
1. Use bigger reserved memory region for Multi Format Codec on all Exynos
chipsets so it could decode FullHD easily.
* tag 'samsung-dt-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Fix indentation of EHCI and OHCI ports
ARM: dts: exynos: Increase MFC left reserved memory region size
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Jan 2017 05:07:40 +0000 (21:07 -0800)]
Merge tag 'imx-dt-4.11' of git://git./linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree updates for 4.11:
- New board support: vf610-zii-dev-rev-c, imx6ul-opos6uldev,
imx6ul-isiot, imx6qdl-savageboard, imx6q-mccmon6.
- A patch from Alexandre to correct the mangled license text which
has been copied & pasted all over the i.MX device tree files.
- Update cpu nodes of some i.MX SoCs to make them consistent and match
ePAPR spec.
- Add OCOTP device for i.MX6UL SoC.
- Add security violation interrupt for i.MX25 DryIce.
- Enable USB OTG, WIFI and Bluetooth support for i.MX6SX Udoo Neo
board.
- Enable S/PDIF and 2nd display pipeline support for CompuLab board..
- Add SPI and LTC3676 PMIC support for Gateworks Ventana boards.
- A few random device addition for various boards: TVE DAC regulators
for imx53-qsb, EEPROM for vf610-zii-dev, eMMC and NAND support for
i.MX6UL Engicam boards.
- Cleanups on obsoleted or unused properties.
* tag 'imx-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
ARM: dts: udoo_neo: Add Bluetooth support
ARM: dts: udoo_neo: Add Wifi support
ARM: dts: udoo_neo: Add UDOO Neo USB OTG1 and OTG2 support
ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL NAND initial support
ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC initial support
ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
ARM: dts: vf610-zii-dev: add EEPROM entry to Rev C
ARM: dts: add Armadeus Systems OPOS6UL and OPOS6ULDEV support
ARM: dts: imx6q-utilite-pro: enable 2nd display pipeline
ARM: dts: vf610-zii-dev: Add .dts file for rev. C
ARM: dts: vf610-zii-dev-rev-b: Remove leftover PWM pingroup
ARM: dts: imx6: Support Savageboard quad
ARM: dts: imx6: Support Savageboard dual
ARM: dts: imx6: Add Savageboard common file
ARM: dts: imx53-qsb: Provide the TVE DAC regulators
ARM: dts: imx6q: Add mccmon6 board support
Doc: devicetree: bindings: Add vendor prefix entry - lwn
ARM: dts: imx/vf: Correct license text
ARM: dts: imx25.dtsi: DryIce security violation interrupt
ARM: dts: imx: Add ocotp node for imx6ul
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Jan 2017 05:05:53 +0000 (21:05 -0800)]
Merge tag 'imx-fixes-nc-4.11' of git://git./linux/kernel/git/shawnguo/linux into next/dt
i.MX non-critical device tree fixes for 4.11:
- A couple of fixes on anatop regulator voltage and constraints
according to hardware datasheet.
- Correct FEC interrupt routing for i.MX6QP which has got the hardware
bug found on i.MX6Q fixed.
- Remove unit address from i.MX6 LDB device node to fix DTC warning.
- A fix on imx53-qsb board FEC pinmux config to remove the dependency
on firmware for setting up pins.
- A series from Sascha to fix LPSR pins for i.MX7 boards.
* tag 'imx-fixes-nc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx53-qsb-common: fix FEC pinmux config
ARM: imx6: remove unit address from LDB node
ARM: imx6qp: adapt DT to changed FEC interrupts
ARM: imx6: fix regulator constraints on anatop 1p1 and 2p5
ARM: imx6: fix min/max voltage of anatop 2p5 regulator
ARM: dts: imx7: Add "LPSR" to LPSR iomux pin names
ARM: dts: imx7d-cl-som: Fix OTG power pinctrl
ARM: dts: imx7d-sdb: Fix watchdog and pwm pinmux
ARM: dts: imx7s-warp: Fix watchdog pinmux
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Jan 2017 05:02:20 +0000 (21:02 -0800)]
Merge tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.11 (part 2)
Switch device tree files to the new DSA binding
* tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding
ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding
ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding
ARM: dts: kirkwood-dir665: Utilize new DSA binding
ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding
ARM: dts: armada-388-clearfog: Utilize new DSA binding
ARM: dts: armada-385-linksys: Utilize new DSA binding
ARM: dts: armada-370-rd: Utilize new DSA binding
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Jan 2017 05:01:23 +0000 (21:01 -0800)]
Merge branch 'sti-dt-for-v4.11-round2' of git://git./linux/kernel/git/pchotard/sti into next/dt
* 'sti-dt-for-v4.11-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STiH407-family: Add missing pwm irq
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Jan 2017 04:58:56 +0000 (20:58 -0800)]
Merge tag 'tegra-for-4.11-arm-dt' of git://git./linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Device tree changes for v4.11-rc1
This contains a set of patches that add hardware compatibility for newer
revisions of the Toradex Apalis TK1. Also included is a fix to the PAZ00
that stabilizes panel initialization on boot as well as a patch to add
card detection for the µSD card slot on TrimSlice.
To round things off there are a couple of fixes and changes to the Nyan
device tree files to fix the battery charger, add compatibility with new
revisions of Nyan Blaze and Nyan Big, as well as properly support the
TPM.
* tag 'tegra-for-4.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: nyan-blaze: Proper pinmux for TPM I2C
ARM: tegra: nyan-big: Proper pinmux for TPM I2C
ARM: tegra: nyan-blaze: Include compatible revisions for proper detection
ARM: tegra: nyan-big: Include compatible revisions for proper detection
ARM: tegra: nyan: Use external control for bq24735 charger
ARM: tegra: nyan: Use proper IRQ type definitions
ARM: dts: tegra: Fix missing card detection in Trimslice µSD card slot
ARM: tegra: paz00: Mark panel regulator as enabled on boot
ARM: tegra: apalis-tk1: Update compatibility comment
ARM: tegra: apalis-tk1: Fix SD card detect on v1.1 HW
ARM: tegra: apalis-tk1: Adjust pin muxing for v1.1 HW
ARM: tegra: apalis-tk1: Optional DisplayPort hot-plug detect
ARM: tegra: apalis-tk1: Pull-up temperature alert
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Jan 2017 04:56:06 +0000 (20:56 -0800)]
Merge tag 'at91-ab-4.11-dt2' of git://git./linux/kernel/git/abelloni/linux into next/dt
DT for 4.11 #2:
- Enable the DMA on sama5d2 and sama5d4 xplained to fix an issue seen by
kernelci
* tag 'at91-ab-4.11-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91: Enable DMA on sama5d2_xplained console
ARM: dts: at91: Enable DMA on sama5d4_xplained console
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Jan 2017 04:54:21 +0000 (20:54 -0800)]
Merge tag 'renesas-dt2-for-v4.11' of https://git./linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.11
Enhancements:
- Add power-domains to mmcif on r7s72100 SoC
- Add OSTM to rskrza1/r7s72100
- Link ARM GIC to clock and clock domain on r8a774[35] SoCs
Clean-up:
- Correct SATA device status on r8a7779/marzen
* tag 'renesas-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r7s72100: add power-domains to mmcif
ARM: dts: rskrza1: add ostm DT support
ARM: dts: r7s72100: add ostm to device tree
ARM: dts: r7s72100: add ostm clock to device tree
ARM: dts: r8a7745: Link ARM GIC to clock and clock domain
ARM: dts: r8a7743: Link ARM GIC to clock and clock domain
ARM: dts: r8a7779, marzen: Fix sata device status
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Jan 2017 01:19:58 +0000 (17:19 -0800)]
Merge tag 'v4.10-next-dts32' of https://github.com/mbgg/linux-mediatek into next/dt
Lots of updates for mt2701:
Rearrange the dt nodes and fix unit address for pincontroler
Add nodes for:
- clock controller subsystems
- scpsys controller
- iommu and smi
- spi
- nand
- auxadc
- thermal controller and zones
Email address updated for mt7623 devicetree files.
* tag 'v4.10-next-dts32' of https://github.com/mbgg/linux-mediatek:
arm: dts: mt2701: Add thermal device node.
arm: dts: mt2701: Add auxadc device node.
arm: dts: mt2701: Add nand device node
arm: dts: mt2701: Add spi device node
ARM: dts: mt2701: add iommu/smi dtsi node for mt2701
ARM: dts: mediatek: update my email address
arm: dts: mt2701: Add power domain controller device node
arm: dts: mt2701: Add subsystem clock controller device nodes
arm: dts: mt2701: Sort DT nodes by register address
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Jan 2017 01:16:52 +0000 (17:16 -0800)]
Merge tag 'omap-for-v4.11/dt-signed-v2' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Device tree changes for omaps for v4.11 merge window. These
changes add earlycon stdout-path propety for the SoCs so far
tested with it. The other changes are addition of BeagleBone
green and making WLAN work on BeagleBone black wireless and
green wireless. The rest of the changes are the usual enabling
features on various devices:
- Enable devices on am335x-sl50
- Changes to dra7-evm boards to enable enable irqs for dp83867
eth phys, add pinmux configuration for mmc, remov erratum
i869 pinmux configurations, disable NAND support because of
pin conflict, add pcf8575 used for lcd
- Remove NAND partition table for omap3-igep
- Configure USB Ethernet MAC from device tree for beagleboard
xm, pandaboard, omap5-uevm and igepv5
- Configure am335x-chilisom to wake from RTC-only state
- Update Nanobone for external FRAM chip
- Clean up n900 dts
- Update am335x-phycore and am335x-wega for various devices
- Changes for am57xx-beagle-x15 to implement rgmii2 errata
* tag 'omap-for-v4.11/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (35 commits)
ARM: dts: dra72/1-evm: add pcf8575 used for lcd
ARM: dts: dra7xx: Add stdout-path property
ARM: dts: am57xx: Add stdout-path property
ARM: dts: am43xx: Add stdout-path property
ARM: dts: am33xx: Add stdout-path property
ARM: dts: am335x-sl50: Enable the Ambient Light Sensor.
ARM: dts: am335x-sl50: Enable the MCP23017 GPIO Expander.
ARM: dts: am335x-sl50: Enable BQ32000 Real Time Clock.
ARM: dts: am335x-sl50: Enable SPI0 interface and Flash Memory.
ARM: dts: am335x-sl50: Enable UART1.
ARM: dts: am335x-sl50: Remove I2C1 node.
ARM: dts: omap3-igep: Remove NAND partition table
ARM: dts: am57xx-beagle-x15: implement errata "Ethernet RGMII2 Limited to 10/100 Mbps"
ARM: dts: am335x-phycore-som: Remove partition tables
ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys
ARM: dts: Configure BeagleBone peripheral USB VBUS irq
ARM: dts: omap5-igep0050: Allow bootloader to configure USB Ethernet MAC
ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC
ARM: dts: pandaboard: Allow bootloader to configure USB Ethernet MAC
ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Jan 2017 01:05:23 +0000 (17:05 -0800)]
Merge tag 'davinci-for-v4.11/dt' of git://git./linux/kernel/git/nsekhar/linux-davinci into next/dt
Device tree updates for DaVinci DA850
* GPIO keys on DA850 LCDK
* LCDC display on DA850 LCDK
* USB OHCI on DA850 LCDK
* VPIF (video input) on DA850 LCDK
* Add a DA8xx specific compatible for UARTs
* Introduce support for Lego Mindstorms EV3
* tag 'davinci-for-v4.11/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: Add LEGO MINDSTORMS EV3 dts
dt-bindings: add "microchip,24c128" compatible string
dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification
dt-bindings: Add vendor prefix for LEGO
ARM: dts: da850: Add ti,da830-uart compatible for serial ports
ARM: dts: davinci: da850-lcdk: enable VPIF
ARM: dts: davinci: da850-evm: enable VPIF
ARM: dts: davinci: da850: VPIF: add node and muxing
ARM: dts: da850-lcdk: Enable ohci for omapl138 lcdk
ARM: dts: da850: Add usb device node
ARM: dts: da850: specify the maximum pixel clock rate for tilcdc
ARM: dts: da850-lcdk: add the vga-bridge node
ARM: dts: da850: rename the display node label
ARM: dts: da850-lcdk: add gpio-keys
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 30 Jan 2017 00:09:01 +0000 (16:09 -0800)]
Merge tag 'qcom-dts-for-4.11' of git://git./linux/kernel/git/agross/linux into next/dt
Qualcomm Device Tree Changes for v4.11
* Add Coresight components for APQ8064
* Fixup PM8058 nodes
* Add APQ8060 gyro and accel support
* Enable SD600 HDMI support
* Add RIVA supprort for Sony Yuga and SD600
* Add PM8821 support
* Add MSM8974 ADSP, USB gadget, SMD, and SMP2P support
* Fix IPQ8064 clock frequencies
* tag 'qcom-dts-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: qcom: Add apq8064 CoreSight components
ARM: dts: Add gyro and accel to APQ8060 Dragonboard
ARM: dts: reference PM8058 as IRQ parent
ARM: dts: rename MSM8660/APQ8060 pmicintc to pm8058
ARM: dts: sd-600eval: enable 1.8v regulator on LS expansion
ARM: dts: sd-600eval: add hdmi support
ARM: dts: move hdmi pinctrl out of board file.
ARM: dts: qcom: sd600eval: Enable riva-pil
ARM: dts: qcom: sd600-eval: pm8921_s2 regulator properties
ARM: dts: qcom: apq8064-sony-yuga: Enable riva-pil
ARM: dts: qcom: apq8064: Add riva-pil node
ARM: dts: apq8064: add support to pm8821
arm: dts: qcom: Fix ipq board clock rates
ARM: dts: msm8974: Remove "unused" reserved region
ARM: dts: msm8974: Add ADSP PIL node
ARM: dts: msm8974: Add ADSP smp2p and smd nodes
ARM: dts: qcom: msm8974: Add USB gadget nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 29 Jan 2017 22:47:53 +0000 (14:47 -0800)]
Merge tag 'uniphier-dt-v4.11' of git://git./linux/kernel/git/masahiroy/linux-uniphier into next/dt
UniPhier ARM SoC DT updates for v4.11
- Add eMMC, SD pin-mux nodes
* tag 'uniphier-dt-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: add SD pin-mux node
ARM: dts: uniphier: add eMMC pin-mux node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 29 Jan 2017 22:45:17 +0000 (14:45 -0800)]
Merge tag 'keystone_dts_for_4.11' of git://git./linux/kernel/git/ssantosh/linux-keystone into next/dt
ARM: Keystone DTS update for 4.11
Brief:
- MSM RAM node support for the Keystone 2 SOCs.
- PSC node & reset controller node support for keystone 2 SOCs.
- da830 UART node support.
* tag 'keystone_dts_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-k2e: Add PSC reset controller node
ARM: dts: keystone-k2l: Add PSC reset controller node
ARM: dts: keystone-k2hk: Add PSC reset controller node
ARM: dts: keystone: Add PSC node
ARM: keystone: dts: fix netcp clocks and add names
ARM: dts: keystone-k2g: Reserve MSM RAM for boot monitor
ARM: dts: keystone-k2e: Reserve MSM RAM for boot monitor
ARM: dts: keystone-k2l: Reserve MSM RAM for boot monitor
ARM: dts: keystone-k2hk: Reserve MSM RAM for boot monitor
ARM: dts: keystone-k2g: Add MSM RAM node
ARM: dts: keystone-k2e: Add MSM RAM node
ARM: dts: keystone-k2l: Add MSM RAM node
ARM: dts: keystone-k2hk: Add MSM RAM node
ARM: dts: keystone: Add "ti,da830-uart" compatible string
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 29 Jan 2017 22:42:05 +0000 (14:42 -0800)]
Merge tag 'v4.11-rockchip-dts32-1' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Bit of cleanup for the cortex-a9 uarts to have that soc-specific
spare-compatible as all others have, conversion to gpio constants
and addition of rk3288 qos nodes that need to be saved before a
power-domain gets turned off.
* tag 'v4.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add soc-specific uart compatibles for rk3066/rk3188
ARM: dts: rockchip: use pin constants to describe gpios
ARM: dts: rockchip: add qos node for rk3288
Signed-off-by: Olof Johansson <olof@lixom.net>
Krzysztof Kozlowski [Sat, 7 Jan 2017 08:52:00 +0000 (10:52 +0200)]
ARM: dts: exynos: Fix indentation of EHCI and OHCI ports
Replace spaces with tabs in EHCI and OHCI ports indentation.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Patrick Bruenn [Wed, 25 Jan 2017 05:25:48 +0000 (06:25 +0100)]
ARM: dts: imx53-qsb-common: fix FEC pinmux config
The pinmux configuration in device tree was different from manual
muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c
All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the
bootloader already did the correct pinmuxing for us.
But recently u-boot is migrating to reuse device tree files from the
kernel tree, so it seems to be better to have the correct pinmuxing in
our files, too.
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Breno Lima [Mon, 23 Jan 2017 20:26:54 +0000 (18:26 -0200)]
ARM: dts: udoo_neo: Add Bluetooth support
Udoo Neo has a TI WL1831 Bluetooth chip connected to the UART3 port.
Add support for it.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Breno Lima [Mon, 23 Jan 2017 20:26:53 +0000 (18:26 -0200)]
ARM: dts: udoo_neo: Add Wifi support
Udoo Neo has a TI WL1831 Wifi chip connected to the USDHC3 port.
Add support for it.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Breno Lima [Mon, 23 Jan 2017 20:26:52 +0000 (18:26 -0200)]
ARM: dts: udoo_neo: Add UDOO Neo USB OTG1 and OTG2 support
Add support for micro USB (OTG1) and USB Host (OTG2) for UDOO Neo board.
Tested on a UDOO Neo Full board by mounting a mass storage device
on both ports.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Fri, 20 Jan 2017 16:44:01 +0000 (17:44 +0100)]
ARM: imx6: remove unit address from LDB node
The LDB has no reg property as it uses the IOMUX-GPR syscon to access
its registers. Remove the unit address from the DT node to make DT
compiler happy.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Fri, 20 Jan 2017 16:17:40 +0000 (17:17 +0100)]
ARM: imx6qp: adapt DT to changed FEC interrupts
On i.MX6QP the FEC interrupts are wired to the GPC, just like all other
device interrupts. This allows to FEC to wake the CPU from WFI, but for
this to work the kernel needs to know about the new IRQ routing.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Thu, 19 Jan 2017 14:21:34 +0000 (15:21 +0100)]
ARM: imx6: fix regulator constraints on anatop 1p1 and 2p5
Fix the min/max voltage constraints for the anatop 1p1 and 2p5
regulator to match the typical operating range mentioned in the
datasheet.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Thu, 19 Jan 2017 14:21:33 +0000 (15:21 +0100)]
ARM: imx6: fix min/max voltage of anatop 2p5 regulator
The regulation bound of this regulator are 2.1V to 2.875V, the
wrong DT values cause the driver to miscalculate the effective
voltage.
This isn't really an issue right now, as nobody actively changes
the regulator voltage, but better fix it now.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sascha Hauer [Thu, 19 Jan 2017 09:09:24 +0000 (10:09 +0100)]
ARM: dts: imx7: Add "LPSR" to LPSR iomux pin names
The i.MX7 has two iomux controllers. the iomuxc and the iomuxc_lpsr.
In a board dts we have to make sure that both controllers are supplied
with the correct pins. It's way too easy to do this wrong since only
a look into the reference manual can reveal which pins belong to which
controller. To make this clearer add "LPSR" to the pin names which
belong to the LPSR controller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sascha Hauer [Thu, 19 Jan 2017 09:09:23 +0000 (10:09 +0100)]
ARM: dts: imx7d-cl-som: Fix OTG power pinctrl
GPIO01_IO05 is controlled by the LPSR iomux controller, so attach
the corresponding pin to this controller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sascha Hauer [Thu, 19 Jan 2017 09:09:22 +0000 (10:09 +0100)]
ARM: dts: imx7d-sdb: Fix watchdog and pwm pinmux
The watchdog pin and the pwm output pin are controlled by the
iomuxc_lpsr, not the regular iomux, so move the pins there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sascha Hauer [Thu, 19 Jan 2017 09:09:21 +0000 (10:09 +0100)]
ARM: dts: imx7s-warp: Fix watchdog pinmux
The watchdog pin is controlled by the iomuxc_lpsr, not the regular
iomux, so move it there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Javier Martinez Canillas [Fri, 27 Jan 2017 20:10:46 +0000 (17:10 -0300)]
ARM: dts: exynos: Increase MFC left reserved memory region size
The sizes of the MFC reserved memory regions for CMA are 16 MiB for the
left bank and 8 MiB for the right bank. But this isn't enough to decode
high resolution videos so increase the size for the left bank to 36 MiB
which is enough for 1080p (1920x1080).
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Patrice Chotard [Fri, 27 Jan 2017 16:34:03 +0000 (17:34 +0100)]
ARM: dts: STiH407-family: Add missing pwm irq
Add the missing interrupt node to properly probe
the pwm device.
This fix following error log :
[ 0.208119] sti-pwm
9510000.pwm: Failed to obtain IRQ
[ 0.222352] pwm-regulator pwm-regulator: Failed to get PWM: -517
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-aff-by: Patrice CHOTARD <patrice.chotard@st.com>
Jerome Coste [Sun, 22 Jan 2017 15:47:53 +0000 (16:47 +0100)]
ARM: tegra: nyan-blaze: Proper pinmux for TPM I2C
This corrects the pinmux for accessing the TPM over the I2C line. Thus,
it allows correctly probing the module, that previously failed with I2C
errors.
Signed-off-by: Jerome Coste <jerome.coste@etu.utc.fr>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Paul Kocialkowski [Sun, 22 Jan 2017 15:47:52 +0000 (16:47 +0100)]
ARM: tegra: nyan-big: Proper pinmux for TPM I2C
This corrects the pinmux for accessing the TPM over the I2C line. Thus,
it allows correctly probing the module, that previously failed with I2C
errors.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Paul Kocialkowski [Sun, 22 Jan 2017 15:47:51 +0000 (16:47 +0100)]
ARM: tegra: nyan-blaze: Include compatible revisions for proper detection
Depthcharge (the payload used with cros devices) will attempt to detect
boards using their revision. This includes all the known revisions for
the nyan-blaze board so that the dtb can be selected preferably.
Defining compatibly revisions allows depthcharge to select the kernel
via the revision it detects instead of using the default kernel. This
allows having a FIT image with multiple kernels for multiple devices.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Paul Kocialkowski [Sun, 22 Jan 2017 15:47:50 +0000 (16:47 +0100)]
ARM: tegra: nyan-big: Include compatible revisions for proper detection
Depthcharge (the payload used with cros devices) will attempt to detect
boards using their revision. This includes all the known revisions for
the nyan-big board so that the dtb can be selected preferably.
Defining compatibly revisions allows depthcharge to select the kernel
via the revision it detects instead of using the default kernel. This
allows having a FIT image with multiple kernels for multiple devices.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Paul Kocialkowski [Sun, 22 Jan 2017 15:47:49 +0000 (16:47 +0100)]
ARM: tegra: nyan: Use external control for bq24735 charger
Nyan boards come with an embedded controller that controls when to
enable and disable the charge. Thus, it should not be left up to the
kernel to handle that.
Using the ti,external-control property allows specifying this use-case.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Paul Kocialkowski [Sun, 22 Jan 2017 15:47:48 +0000 (16:47 +0100)]
ARM: tegra: nyan: Use proper IRQ type definitions
This switches a few interrupt definitions that were using
GPIO_ACTIVE_HIGH as IRQ type, which is invalid.
This is mostly a cosmetic change, that doesn't affect any driver.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Chris Brandt [Mon, 23 Jan 2017 14:13:49 +0000 (09:13 -0500)]
ARM: dts: r7s72100: add power-domains to mmcif
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Rask Ingemann Lambertsen [Sun, 22 Jan 2017 21:17:48 +0000 (22:17 +0100)]
ARM: dts: tegra: Fix missing card detection in Trimslice µSD card slot
Card insertion and removal currently goes undetected. AFAIK there's no
way to generate interrupts on card changes in this slot, so use polling.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marc Dietrich [Fri, 9 Dec 2016 09:20:38 +0000 (10:20 +0100)]
ARM: tegra: paz00: Mark panel regulator as enabled on boot
Current U-Boot enables the display already. Marking the regulator as
enabled on boot fixes sporadic panel initialization failures.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Tested-by: Misha Komarovskiy <zombah@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Tue, 22 Nov 2016 00:14:07 +0000 (01:14 +0100)]
ARM: tegra: apalis-tk1: Update compatibility comment
Now with the new V1.1A HW card detect being implemented update resp.
compatibility information.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Tue, 22 Nov 2016 00:14:06 +0000 (01:14 +0100)]
ARM: tegra: apalis-tk1: Fix SD card detect on v1.1 HW
Add SD card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Tue, 22 Nov 2016 00:14:05 +0000 (01:14 +0100)]
ARM: tegra: apalis-tk1: Adjust pin muxing for v1.1 HW
Configure Apalis MMC1 D6 GPIO on SDMMC3_CLK_LB_IN as reserved function
without any pull-up/down.
Configure GPIO_PV2 as SD1_CD# according to latest V1.1 HW.
Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output driver enabled aka
not tristated and input driver enabled as well as it features some
magic properties even though the external loopback is disabled and the
internal loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 register's
SDMMC_SPARE1 bits being set to 0xfffd according to the TRM! This pin is
now a not-connect on V1.1 HW in order to avoid any interference.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Tue, 22 Nov 2016 00:14:04 +0000 (01:14 +0100)]
ARM: tegra: apalis-tk1: Optional DisplayPort hot-plug detect
Configure DP_HPD_PFF0 pin as optional DisplayPort hot-plug detect.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Marcel Ziswiler [Tue, 22 Nov 2016 00:14:03 +0000 (01:14 +0100)]
ARM: tegra: apalis-tk1: Pull-up temperature alert
Pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2#.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Chris Brandt [Mon, 23 Jan 2017 13:55:20 +0000 (08:55 -0500)]
ARM: dts: rskrza1: add ostm DT support
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Chris Brandt [Mon, 23 Jan 2017 13:55:19 +0000 (08:55 -0500)]
ARM: dts: r7s72100: add ostm to device tree
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Chris Brandt [Mon, 23 Jan 2017 13:55:18 +0000 (08:55 -0500)]
ARM: dts: r7s72100: add ostm clock to device tree
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Dawei Chien [Tue, 17 Jan 2017 09:24:09 +0000 (17:24 +0800)]
arm: dts: mt2701: Add thermal device node.
Add thermal controller device nodes for MT2701.
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Jagan Teki [Mon, 23 Jan 2017 09:43:10 +0000 (17:43 +0800)]
ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL NAND initial support
Engicam Is.IoT MX6UL has separate module for NAND, so add nand dts
file for imx6ul-isiot.dtsi.
dmesg:
-----
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAH4
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
gpmi-nand
1806000.gpmi-nand: enable the asynchronous EDO mode 5
gpmi-nand
1806000.gpmi-nand: driver registered.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Jagan Teki [Mon, 23 Jan 2017 09:38:34 +0000 (17:38 +0800)]
ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC initial support
Engicam Is.IoT MX6UL has separate module for eMMC, so add emmc dts
file for imx6ul-isiot.dtsi, usdhc2 node represent eMMC.
dmesg:
-----
mmc1: SDHCI controller on
2194000.usdhc [
2194000.usdhc] using ADMA
mmc1: new DDR MMC card at address 0001
mmcblk1: mmc1:0001 M62704 3.53 GiB
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tomi Valkeinen [Fri, 20 Jan 2017 19:52:20 +0000 (13:52 -0600)]
ARM: dts: dra72/1-evm: add pcf8575 used for lcd
DRA72 and DRA718 EVM boards has a pcf8575 gpio expander
which is used for the LCD/LEDs and USB vbus detection.
Add the node for the pcf8575.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Geert Uytterhoeven [Tue, 17 Jan 2017 12:49:18 +0000 (13:49 +0100)]
ARM: dts: r8a7745: Link ARM GIC to clock and clock domain
Link the ARM GIC to the INTC-SYS module clock, and add it to the SYSC
"always-on" PM Domain, so it can be power managed using that clock.
Note that currently the GIC-400 driver doesn't support module clocks nor
Runtime PM, so this must be handled as a critical clock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Tue, 17 Jan 2017 12:49:17 +0000 (13:49 +0100)]
ARM: dts: r8a7743: Link ARM GIC to clock and clock domain
Link the ARM GIC to the INTC-SYS module clock, and add it to the SYSC
"always-on" PM Domain, so it can be power managed using that clock.
Note that currently the GIC-400 driver doesn't support module clocks nor
Runtime PM, so this must be handled as a critical clock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Jagan Teki [Thu, 19 Jan 2017 23:09:33 +0000 (00:09 +0100)]
ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
Fixed code indent tabs in respective imx6qdl dtsi files and
also add space on imx6qdl-icore-rqs.dtsi on usdhc bus-width nodes.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vivien Didelot [Thu, 12 Jan 2017 23:06:20 +0000 (18:06 -0500)]
ARM: dts: vf610-zii-dev: add EEPROM entry to Rev C
The ZII Dev Rev C board has EEPROMs hanging the
88E6390 Ethernet switch
chips. Add an "eeprom-length" property to allow access from ethtool.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sébastien Szymanski [Tue, 10 Jan 2017 13:32:53 +0000 (14:32 +0100)]
ARM: dts: add Armadeus Systems OPOS6UL and OPOS6ULDEV support
OPOS6UL is an i.MX6UL based SoM.
OPOS6ULDev is a carrier board for the OPOS6UL SoM.
For more details see:
http://www.opossom.com/english/products-processor_boards-opos6ul.html
http://www.opossom.com/english/products-development_boards-opos6ul_dev.html
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Christopher Spinrath [Fri, 2 Dec 2016 14:37:22 +0000 (15:37 +0100)]
ARM: dts: imx6q-utilite-pro: enable 2nd display pipeline
Apart from the already enabled Designware HDMI port, the Utilite Pro
has a second display pipeline which has the following shape:
IPU1 DI0 --> Parallel display --> tfp410 rgb24 to DVI encoder
--> HDMI connector.
Enable support for it.
In addition, since this pipeline is hardwired to IPU1, sever the link
between IPU1 and the SoC-internal Designware HDMI encoder forcing the
latter to be connected to IPU2 instead of IPU1. Otherwise, it is not
possible to drive both displays at high resolution due to the bandwidth
limitations of a single IPU.
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexandre Belloni [Thu, 19 Jan 2017 22:05:39 +0000 (23:05 +0100)]
ARM: dts: at91: Enable DMA on sama5d2_xplained console
Enable DMA on uart1 to get a more reliable console.
Cc: stable <stable@vger.kernel.org> #v4.3+
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Masahiro Yamada [Sun, 22 Jan 2017 12:46:49 +0000 (21:46 +0900)]
ARM: dts: uniphier: add SD pin-mux node
The Pro4 SoC has 2 slots of SD controllers, so 2 pin-mux nodes
(SD and SD1) are needed. The other SoCs have only 1 SD slot.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 22 Jan 2017 12:46:49 +0000 (21:46 +0900)]
ARM: dts: uniphier: add eMMC pin-mux node
All UniPhier SoCs support an eMMC controller.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Lokesh Vutla [Wed, 18 Jan 2017 04:03:26 +0000 (09:33 +0530)]
ARM: dts: dra7xx: Add stdout-path property
Add stdout-path property in /chosen node so that earlycon can be
used by just adding earlycon in bootargs.
Tested-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lokesh Vutla [Wed, 18 Jan 2017 04:03:25 +0000 (09:33 +0530)]
ARM: dts: am57xx: Add stdout-path property
Add stdout-path property in /chosen node so that earlycon can be
used by just adding earlycon in bootargs.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lokesh Vutla [Wed, 18 Jan 2017 04:03:24 +0000 (09:33 +0530)]
ARM: dts: am43xx: Add stdout-path property
Add stdout-path property in /chosen node so that earlycon can be
used by just adding earlycon in bootargs.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lokesh Vutla [Wed, 18 Jan 2017 04:03:23 +0000 (09:33 +0530)]
ARM: dts: am33xx: Add stdout-path property
Add stdout-path property in /chosen node so that earlycon can be
used by just adding earlycon in bootargs.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enric Balletbo i Serra [Mon, 16 Jan 2017 16:57:36 +0000 (17:57 +0100)]
ARM: dts: am335x-sl50: Enable the Ambient Light Sensor.
Add support for the ISL29023 ALS connected via the I2C bus.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enric Balletbo i Serra [Mon, 16 Jan 2017 16:57:35 +0000 (17:57 +0100)]
ARM: dts: am335x-sl50: Enable the MCP23017 GPIO Expander.
Add support for the 16-Bit I/O Expander connected via the I2C bus.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enric Balletbo i Serra [Mon, 16 Jan 2017 16:57:34 +0000 (17:57 +0100)]
ARM: dts: am335x-sl50: Enable BQ32000 Real Time Clock.
Add support for the BQ32000 Real Time Clock connected to the I2C bus
and disable the AM335x Real Time Clock.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enric Balletbo i Serra [Mon, 16 Jan 2017 16:57:33 +0000 (17:57 +0100)]
ARM: dts: am335x-sl50: Enable SPI0 interface and Flash Memory.
Add support for the 32Mb Serial Flash Memory connected to SPI0
and using CS1.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enric Balletbo i Serra [Mon, 16 Jan 2017 16:57:32 +0000 (17:57 +0100)]
ARM: dts: am335x-sl50: Enable UART1.
The UART1 is connected to the infrared (IR) receiver module, so enable it
to be able to comunicate with it.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enric Balletbo i Serra [Mon, 16 Jan 2017 16:57:31 +0000 (17:57 +0100)]
ARM: dts: am335x-sl50: Remove I2C1 node.
I2C1 is not used so remove it in order to avoid conflicts.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
David Lechner [Fri, 13 Jan 2017 19:03:42 +0000 (13:03 -0600)]
ARM: dts: Add LEGO MINDSTORMS EV3 dts
This adds a device tree definition file for LEGO MINDSTORMS EV3.
What is working:
* Pin muxing
* Pinconf
* GPIOs
* MicroSD card reader
* UART on input port 1
* Buttons
* LEDs
* Poweroff/reset
* Flash memory
* EEPROM
* USB host port
* USB peripheral port
What is not working/to be added later:
* Speaker - have patch submitted to get pwm-beeper working - maybe someday
it will have a real sound driver that uses PRU
* A/DC chip - have driver submitted and accepted - waiting for ack on
device tree bindings
* Display - waiting for "simple DRM" to be mainlined
* Bluetooth - needs new driver for sequencing power/enable/clock
* Input and output ports - need some sort of new phy or extcon driver as
well as PRU UART and PRU I2C drivers
* Battery indication - needs new power supply driver
Note on flash partitions:
These partitions are based on the official EV3 firmware from LEGO. It is
expected that most users of the mainline kernel on EV3 will be booting from
an SD card while retaining the official firmware in the flash memory.
Furthermore, the official firmware uses an ancient U-Boot (2009) that has
no device tree support. So, it makes sense to have this partition table in
the EV3 device tree file. In the unlikely case that anyone does create
their own firmware image with different partitioning, they can use a modern
U-Boot in their own firmware image that modifies the device tree with the
custom partitions.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
David Lechner [Fri, 13 Jan 2017 19:03:41 +0000 (13:03 -0600)]
dt-bindings: add "microchip,24c128" compatible string
This adds "microchip,24c128" to the list of compatible strings for i2c
eeproms.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
David Lechner [Fri, 13 Jan 2017 19:03:40 +0000 (13:03 -0600)]
dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification
This adds the board level device tree specification for LEGO MINDSTORMS EV3
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
David Lechner [Fri, 13 Jan 2017 19:03:39 +0000 (13:03 -0600)]
dt-bindings: Add vendor prefix for LEGO
Add a vendor prefix for LEGO Systems A/S
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Olof Johansson [Fri, 20 Jan 2017 00:25:07 +0000 (16:25 -0800)]
Merge tag 'arm-soc/for-4.11/devicetree' of github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.11,
please pull the following changes:
- Rafal enables the UART by default on all BCM5301x, BCM4708, BCM4709 since
every device found out there has it enabled by default. He also fixes the
LED definitions for the Luxul XWR-3100 device, enables USB controllers and
their respective PHY devices, specifies the correct GPIO to power on USB
HUBs, adds the additional RAM bank for somes devices, and finally sets the
correct 5Ghz frequency limits on the Netgear R8000
- Jon does a number of Norsthar Plus SoC cleanups, fixes NAND partitions unit
addresses, adds QSPI support to a bunch of boards, adds Ethernet switch ports
to the BCM958625K reference board, enables 3rd Ethernet MAC instance to
relevant DTSes, enables Ethernet on the XMC board, and finally adds SD/MMC
support to the XMC board
- Boris adds the Video Encoder nodes to the Raspberry Pi DTS include files
ands enables it on the relevant boards
- Dan adds support for two new Luxul devices: XAP-1410 and XWR-1200, both
BCM47081 based SoCs
* tag 'arm-soc/for-4.11/devicetree' of http://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi boards
ARM: dts: bcm283x: Add VEC node in bcm283x.dtsi
ARM: dts: BCM5301X: Add DT for Luxul XWR-1200
ARM: dts: BCM5301X: Add DT for Luxul XAP-1410
ARM: dts: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000
ARM: dts: NSP: Add SD/MMC support
ARM: dts: NSP: Add Ethernet to NSP XMC
ARM: dts: NSP: Add and enable amac2
ARM: dts: NSP: Add BCM958625K switch ports
ARM: dts: NSP: Add QSPI support to missing boards
ARM: dts: NSP: Correct NAND partition unit address
ARM: dts: NSP: DT Clean-ups
ARM: dts: BCM53573: Specify USB ports of on-SoC controllers
ARM: dts: BCM5301X: Specify all RAM by including an extra block
ARM: dts: BCM5301X: Set GPIO enabling USB power on Netgear R7000
ARM: dts: BCM5301X: Specify USB controllers in DT
ARM: dts: BCM5301X: Fix LAN LED labels for Luxul XWR-3100
ARM: dts: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012
Signed-off-by: Olof Johansson <olof@lixom.net>
Marc Gonzalez [Thu, 19 Jan 2017 14:59:04 +0000 (15:59 +0100)]
ARM: dts: tango4: Import USB nodes
Tango4 provides 2 USB 2.0 controllers.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Marc Gonzalez [Thu, 19 Jan 2017 14:57:54 +0000 (15:57 +0100)]
ARM: dts: tango4: Import MMC nodes
Tango4 provides 2 SD/SDIO/eMMC controllers.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Marc Gonzalez [Thu, 19 Jan 2017 14:52:04 +0000 (15:52 +0100)]
ARM: dts: tango4: Add alias for eth0
http://elinux.org/Device_Tree_Usage#aliases_Node
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Florian Fainelli [Tue, 17 Jan 2017 18:22:24 +0000 (10:22 -0800)]
ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding
Utilize the new DSA binding, introduced with commit
8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Florian Fainelli [Tue, 17 Jan 2017 18:22:23 +0000 (10:22 -0800)]
ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding
Utilize the new DSA binding, introduced with commit
8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Florian Fainelli [Tue, 17 Jan 2017 18:22:22 +0000 (10:22 -0800)]
ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding
Utilize the new DSA binding, introduced with commit
8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Florian Fainelli [Tue, 17 Jan 2017 18:22:21 +0000 (10:22 -0800)]
ARM: dts: kirkwood-dir665: Utilize new DSA binding
Utilize the new DSA binding, introduced with commit
8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Florian Fainelli [Tue, 17 Jan 2017 18:22:20 +0000 (10:22 -0800)]
ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding
Utilize the new DSA binding, introduced with commit
8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Florian Fainelli [Tue, 17 Jan 2017 18:22:19 +0000 (10:22 -0800)]
ARM: dts: armada-388-clearfog: Utilize new DSA binding
Utilize the new DSA binding, introduced with commit
8c5ad1d6179d ("net:
dsa: Document new binding"). The legacy binding node is kept included, but is
marked disabled.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Florian Fainelli [Tue, 17 Jan 2017 18:22:18 +0000 (10:22 -0800)]
ARM: dts: armada-385-linksys: Utilize new DSA binding
Utilize the new DSA binding, introduced with commit
8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Florian Fainelli [Tue, 17 Jan 2017 18:22:17 +0000 (10:22 -0800)]
ARM: dts: armada-370-rd: Utilize new DSA binding
Utilize the new DSA binding, introduced with commit
8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Alexandre Belloni [Thu, 19 Jan 2017 00:46:58 +0000 (01:46 +0100)]
ARM: dts: at91: Enable DMA on sama5d4_xplained console
Enable DMA on usart3 to get a more reliable console. This is especially
useful for automation and kernelci were a kernel with PROVE_LOCKING enabled
is quite susceptible to character loss, resulting in tests failure.
Cc: stable <stable@vger.kernel.org> #v4.1+
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Suman Anna [Thu, 19 Jan 2017 17:44:11 +0000 (09:44 -0800)]
ARM: dts: keystone-k2e: Add PSC reset controller node
The Power Sleep Controller (PSC) module contains specific
memory-mapped registers that can be used to perform reset
management using specific bits for the DSPs available on the
SoC. The PSC is defined using a syscon node, and the reset
functionality is defined using a child syscon reset controller
node.
Add this syscon reset controller node as well as the reset
control data for the resets it supports for the 66AK2E SoCs.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Suman Anna [Thu, 19 Jan 2017 17:44:11 +0000 (09:44 -0800)]
ARM: dts: keystone-k2l: Add PSC reset controller node
The Power Sleep Controller (PSC) module contains specific
memory-mapped registers that can be used to perform reset
management using specific bits for the DSPs available on the
SoC. The PSC is defined using a syscon node, and the reset
functionality is defined using a child syscon reset controller
node.
Add this syscon reset controller node as well as the reset
control data for the resets it supports for the 66AK2L SoCs.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Suman Anna [Thu, 19 Jan 2017 17:44:11 +0000 (09:44 -0800)]
ARM: dts: keystone-k2hk: Add PSC reset controller node
The Power Sleep Controller (PSC) module contains specific
memory-mapped registers that can be used to perform reset
management using specific bits for the DSPs available on the
SoC. The PSC is defined using a syscon node, and the reset
functionality is defined using a child syscon reset controller
node.
Add this syscon reset controller node as well as the reset
control data for the resets it supports for the 66AK2H SoCs.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Suman Anna [Thu, 19 Jan 2017 17:44:11 +0000 (09:44 -0800)]
ARM: dts: keystone: Add PSC node
The Power Sleep Controller (PSC) module is responsible
for the power and clock management for each of the peripherals
present on the SoC. Represent this as a syscon node so that
multiple users can leverage it for various functionalities.
Signed-off-by: Suman Anna <s-anna@ti.com>
[afd@ti.com: add simple-mfd compatible]
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Murali Karicheri [Thu, 19 Jan 2017 17:31:48 +0000 (09:31 -0800)]
ARM: keystone: dts: fix netcp clocks and add names
Fix the pa clock to point to the clkpa which has clock rate of 1/3 of PA
PLL clock and add clock names.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Heiko Stuebner [Thu, 19 Jan 2017 16:04:44 +0000 (17:04 +0100)]
ARM: dts: rockchip: add soc-specific uart compatibles for rk3066/rk3188
The serial IPs in Rockchip socs are based on Designware uarts and thus
bind against the snps,dw-apb-uart compatible.
On all newer socs we also carry around per-soc compatibles that allow
us to have more specific drivers in the future - if needed.
The cortex-a9 socs rk3066 and rk3188 that were added first don't have
those yet, so add them for completenes sake.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Florian Fainelli [Wed, 18 Jan 2017 01:10:32 +0000 (17:10 -0800)]
Merge tag 'bcm2835-dt-next-2017-01-17' into devicetree/next
This pull request brings in the DT changes for VEC (TV-out) on
Raspberry Pi.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Boris Brezillon [Fri, 2 Dec 2016 13:48:13 +0000 (14:48 +0100)]
ARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi boards
Enable the VEC IP on all RaspberryPi boards.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Boris Brezillon [Fri, 2 Dec 2016 13:48:12 +0000 (14:48 +0100)]
ARM: dts: bcm283x: Add VEC node in bcm283x.dtsi
Add the VEC (Video EnCoder) node definition in bcm283x.dtsi.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Dan Haab [Sun, 15 Jan 2017 02:29:28 +0000 (19:29 -0700)]
ARM: dts: BCM5301X: Add DT for Luxul XWR-1200
Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
flash (for bootloader and NVRAM) and NAND flash (for firmware).
Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Dan Haab [Sun, 15 Jan 2017 02:29:27 +0000 (19:29 -0700)]
ARM: dts: BCM5301X: Add DT for Luxul XAP-1410
Luxul XAP-1410 in a dual-band access point device based on BCM47081 with
serial flash. It has 3 LEDs and just one (reset) button.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rafał Miłecki [Fri, 13 Jan 2017 23:58:57 +0000 (00:58 +0100)]
ARM: dts: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000
Netgear R8000 is a tri-band home router. It has three BCM43602 chipsets
two of them for 5 GHz band. Both seem the same and their firmwares
report the same set of channels. The problem is due to hardware / board
design there are extra limitations that should be respected.
First PHY should be used for U-NII-2 and U-NII-3. Third PHY should be
used for U-NII-1. Using them in a different way may result in wireless
not working or in noticeably reduced performance. Basic version of this
info was provided by Broadcom employee, then it has been verified by me
using original vendor firmware (which has limitations hardcoded in UI).
This patch uses recently introduced ieee80211-freq-limit property to
describe these limitations at DT level.
Referencing PCIe devices in DT required specifying all related bridges.
Below you can see (a bit complex) PCI tree from R8000 that explains all
entries that I needed to put in DT.
0000:00:00.0 14e4:8012 Bridge Device
└─ 0000:01:00.0 14e4:aa52 Network Controller
0001:00:00.0 14e4:8012 Bridge Device
└─ 0001:01:00.0 10b5:8603 Bridge Device
├─ 0001:02:01.0 10b5:8603 Bridge Device
│ └─ 0001:03:00.0 14e4:aa52 Network Controller
├─ 0001:02:02.0 10b5:8603 Bridge Device
│ └─ 0001:04:00.0 14e4:aa52 Network Controller
├─ 0001:02:03.0 000d:0000 0x000000
├─ 0001:02:04.0 000d:0000 0x000000
├─ 0001:02:05.0 000d:0000 0x000000
├─ 0001:02:06.0 000d:0000 0x000000
├─ (...)
├─ 0001:02:1d.0 000d:0000 0x000000
├─ 0001:02:1e.0 000d:0000 0x000000
└─ 0001:02:1f.0 000d:0000 0x000000
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Jon Mason [Tue, 13 Dec 2016 18:13:51 +0000 (13:13 -0500)]
ARM: dts: NSP: Add SD/MMC support
Add SD/MMC support to the Broadcom NSP SVK and XMC.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>