OSDN Git Service
Fabio Estevam [Wed, 8 Jul 2020 21:24:21 +0000 (18:24 -0300)]
dt-bindings: dp83867: Fix the type of device
DP83867 is an Ethernet PHY, not a charger, so fix the documentation
accordingly.
Fixes:
74ac28f16486 ("dt-bindings: dp83867: Convert DP83867 to yaml")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jarod Wilson [Wed, 8 Jul 2020 17:46:31 +0000 (13:46 -0400)]
bonding: deal with xfrm state in all modes and add more error-checking
It's possible that device removal happens when the bond is in non-AB mode,
and addition happens in AB mode, so bond_ipsec_del_sa() never gets called,
which leaves security associations in an odd state if bond_ipsec_add_sa()
then gets called after switching the bond into AB. Just call add and
delete universally for all modes to keep things consistent.
However, it's also possible that this code gets called when the system is
shutting down, and the xfrm subsystem has already been disconnected from
the bond device, so we need to do some error-checking and bail, lest we
hit a null ptr deref.
Fixes:
a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load")
CC: Huy Nguyen <huyn@mellanox.com>
CC: Saeed Mahameed <saeedm@mellanox.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Jul 2020 22:36:19 +0000 (15:36 -0700)]
Merge branch 'RTL8366RB-tagging-support'
Linus Walleij says:
====================
RTL8366RB tagging support
This patch set adds DSA tagging support to the RTL8366RB
DSA driver.
There is a minor performance improvement in the tag parser
compared to the previous patch set and the review tags
have been collected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Walleij [Wed, 8 Jul 2020 12:25:37 +0000 (14:25 +0200)]
net: dsa: rtl8366rb: Support the CPU DSA tag
This activates the support to use the CPU tag to properly
direct ingress traffic to the right port.
Bit 15 in register RTL8368RB_CPU_CTRL_REG can be set to
1 to disable the insertion of the CPU tag which is what
the code currently does. The bit 15 define calls this
setting RTL8368RB_CPU_INSTAG which is confusing since the
inverse meaning is implied: programmers may think that
setting this bit to 1 will *enable* inserting the tag
rather than disabling it, so rename this setting in
bit 15 to RTL8368RB_CPU_NO_TAG which is more to the
point.
After this e.g. ping works out-of-the-box with the
RTL8366RB.
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Walleij [Wed, 8 Jul 2020 12:25:36 +0000 (14:25 +0200)]
net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag
This implements the known parts of the Realtek 4 byte
tag protocol version 0xA, as found in the RTL8366RB
DSA switch.
It is designated as protocol version 0xA as a
different Realtek 4 byte tag format with protocol
version 0x9 is known to exist in the Realtek RTL8306
chips.
The tag and switch chip lacks public documentation, so
the tag format has been reverse-engineered from
packet dumps. As only ingress traffic has been available
for analysis an egress tag has not been possible to
develop (even using educated guesses about bit fields)
so this is as far as it gets. It is not known if the
switch even supports egress tagging.
Excessive attempts to figure out the egress tag format
was made. When nothing else worked, I just tried all bit
combinations with 0xannp where a is protocol and p is
port. I looped through all values several times trying
to get a response from ping, without any positive
result.
Using just these ingress tags however, the switch
functionality is vastly improved and the packets find
their way into the destination port without any
tricky VLAN configuration. On the D-Link DIR-685 the
LAN ports now come up and respond to ping without
any command line configuration so this is a real
improvement for users.
Egress packets need to be restricted to the proper
target ports using VLAN, which the RTL8366RB DSA
switch driver already sets up.
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Meir Lichtinger [Tue, 7 Jul 2020 03:42:33 +0000 (20:42 -0700)]
net/mlx5: Added support for 100Gbps per lane link modes
This patch exposes new link modes using 100Gbps per lane, including 100G,
200G and 400G modes.
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Meir Lichtinger [Tue, 7 Jul 2020 03:42:32 +0000 (20:42 -0700)]
ethtool: Add support for 100Gbps per lane link modes
Define 100G, 200G and 400G link modes using 100Gbps per lane
LR, ER and FR are defined as a single link mode because they are
using same technology and by design are fully interoperable.
EEPROM content indicates if the module is LR, ER, or FR, and the
user space ethtool decoder is planned to support decoding these
modes in the EEPROM.
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
CC: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Jul 2020 22:21:14 +0000 (15:21 -0700)]
Merge branch 'bnxt_en-Driver-update-for-net-next'
Michael Chan says:
====================
bnxt_en: Driver update for net-next.
This patchset implements ethtool -X to setup user-defined RSS indirection
table. The new infrastructure also allows the proper logical ring index
to be used to populate the RSS indirection when queried by ethtool -x.
Prior to these patches, we were incorrectly populating the output of
ethtool -x with internal ring IDs which would make no sense to the user.
The last 2 patches add some cleanups to the VLAN acceleration logic
and check the firmware capabilities before allowing VLAN acceleration
offloads.
v4: Move bnxt_get_rxfh_indir_size() fix to a new patch #2.
Modify patch #7 to revert RSS map to default only when necessary.
v3: Use ALIGN() in patch 5.
Add warning messages in patch 6.
v2: Some RSS indirection table changes requested by Jakub Kicinski.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edwin Peer [Wed, 8 Jul 2020 11:54:01 +0000 (07:54 -0400)]
bnxt_en: allow firmware to disable VLAN offloads
Bare-metal use cases require giving firmware and the embedded
application processor control over VLAN offloads. The driver should
not attempt to override or utilize this feature in such scenarios
since it will not work as expected.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edwin Peer [Wed, 8 Jul 2020 11:54:00 +0000 (07:54 -0400)]
bnxt_en: clean up VLAN feature bit handling
The hardware VLAN offload feature on our NIC does not have separate
knobs for handling customer and service tags on RX. Either offloading
of both must be enabled or both must be disabled. Introduce definitions
for the combined feature set in order to clean up the code and make
this constraint more clear. Technically these features can be separately
enabled on TX, however, since the default is to turn both on, the
combined TX feature set is also introduced for code consistency.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 8 Jul 2020 11:53:59 +0000 (07:53 -0400)]
bnxt_en: Implement ethtool -X to set indirection table.
With the new infrastructure in place, we can now support the setting of
the indirection table from ethtool.
When changing channels, in a rare case that firmware cannot reserve the
rings that were promised, we will still try to keep the RSS map and only
revert to default when absolutely necessary.
v4: Revert RSS map to default during ring change only when absolutely
necessary.
v3: Add warning messages when firmware cannot reserve the requested RX
rings, and when the RSS table entries have to change to default.
v2: When changing channels, if the RSS table size changes and RSS map
is non-default, return error.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 8 Jul 2020 11:53:58 +0000 (07:53 -0400)]
bnxt_en: Return correct RSS indirection table entries to ethtool -x.
Now that we have the logical indirection table, we can return these
proper logical indices directly to ethtool -x instead of the physical
IDs.
Reported-by: Jakub Kicinski <kicinski@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 8 Jul 2020 11:53:57 +0000 (07:53 -0400)]
bnxt_en: Fill HW RSS table from the RSS logical indirection table.
Now that we have the logical table, we can fill the HW RSS table
using the logical table's entries and converting them to the HW
specific format. Re-initialize the logical table to standard
distribution if the number of RX rings changes during ring reservation.
v4: Use bnxt_get_rxfh_indir_size() to get the RSS table size.
v2: Use ALIGN() to roundup the RSS table size.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 8 Jul 2020 11:53:56 +0000 (07:53 -0400)]
bnxt_en: Add helper function to return the number of RSS contexts.
On some chips, this varies based on the number of RX rings. Add this
helper function and refactor the existing code to use it.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 8 Jul 2020 11:53:55 +0000 (07:53 -0400)]
bnxt_en: Add logical RSS indirection table structure.
The driver currently does not keep track of the logical RSS indirection
table. The hardware RSS table is set up with standard default ring
distribution when initializing the chip. This makes it difficult to
support user sepcified indirection table entries. As a first step, add
the logical table in the main bnxt structure and allocate it according
to chip specific table size. Add a function that sets up default
RSS distribution based on the number of RX rings.
v4: Use bnxt_get_rxfh_indir_size() for the current RSS table size.
v2: Use kmalloc_array() since we init. all entries afterwards.
Use ALIGN() to roundup the RSS table size.
Use ethtool_rxfh_indir_default() to init. the default entries.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 8 Jul 2020 11:53:54 +0000 (07:53 -0400)]
bnxt_en: Fix up bnxt_get_rxfh_indir_size().
Fix up bnxt_get_rxfh_indir_size() to return the proper current RSS
table size for P5 chips. Change it to non-static so that bnxt.c
can use it to get the table size.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 8 Jul 2020 11:53:53 +0000 (07:53 -0400)]
bnxt_en: Set up the chip specific RSS table size.
Currently, we allocate one page for the hardware DMA RSS indirection
table. While the size is currently big enough for all chips, future
chip variations may support bigger sizes, so it is better to calculate
and store the chip specific size and allocate accordingly.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Jul 2020 19:42:40 +0000 (12:42 -0700)]
Merge git://git./linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Support for rejecting packets from the prerouting chain, from
Laura Garcia Liebana.
2) Remove useless assignment in pipapo, from Stefano Brivio.
3) On demand hook registration in IPVS, from Julian Anastasov.
4) Expire IPVS connection from process context to not overload
timers, also from Julian.
5) Fallback to conntrack TCP tracker to handle connection reuse
in IPVS, from Julian Anastasov.
6) Several patches to support for chain bindings.
7) Expose enum nft_chain_flags through UAPI.
8) Reject unsupported chain flags from the netlink control plane.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Jul 2020 19:39:05 +0000 (12:39 -0700)]
Merge branch 'net-phy-Uninline-PHY-ethtool-statistics'
Florian Fainelli says:
====================
net: phy: Uninline PHY ethtool statistics
Now that we have introduced ethtool_phy_ops we can uninline those
operations and move them back into phy.c where they belong. Since those
functions are used by DSA, we need to continue exporting those symbols.
It might be possible to remove ndo_get_ethtool_phy_stats in a subsequent
patch since we could have DSA register its own ethtool_phy_ops instance
instead of overloading the ethtool_ops.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 8 Jul 2020 16:46:25 +0000 (09:46 -0700)]
net: phy: Uninline PHY ethtool statistics operations
Now that we have moved the PHY ethtool statistics to be dynamically
registered, we no longer need to inline those for ethtool. This used to
be done to avoid cross symbol referencing and allow ethtool to be
decoupled from PHYLIB entirely.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 8 Jul 2020 16:46:24 +0000 (09:46 -0700)]
net: phy: Define PHY statistics ethtool_phy_ops
Extend ethtool_phy_ops to include the 3 function pointers necessary for
implementing PHY statistics. In a subsequent change we will uninline
those functions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander A. Klimov [Wed, 8 Jul 2020 10:35:19 +0000 (12:35 +0200)]
Replace HTTP links with HTTPS ones: ATMEL MACB ETHERNET DRIVER
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 8 Jul 2020 04:45:13 +0000 (21:45 -0700)]
net: dsa: loop: Print when registration is successful
We have a number of error conditions that can lead to the driver not
probing successfully, move the print when we are sure
dsa_register_switch() has suceeded. This avoids repeated prints in case
of probe deferral for instance.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Healy [Tue, 7 Jul 2020 20:32:05 +0000 (13:32 -0700)]
net: sfp: add error checking with sfp_irq_name
Add error checking with sfp_irq_name before use.
Signed-off-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Tue, 7 Jul 2020 17:21:38 +0000 (12:21 -0500)]
net/sched: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander A. Klimov [Mon, 6 Jul 2020 20:50:30 +0000 (22:50 +0200)]
Replace HTTP links with HTTPS ones: X.25 network layer
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander A. Klimov [Mon, 6 Jul 2020 20:50:18 +0000 (22:50 +0200)]
Replace HTTP links with HTTPS ones: GRETH 10/100/1G Ethernet MAC device driver
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 6 Jul 2020 12:12:40 +0000 (13:12 +0100)]
bnx2x: fix spelling mistake "occurd" -> "occurred"
There are spelling mistakes in various literal strings. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 7 Jul 2020 22:41:05 +0000 (15:41 -0700)]
Merge branch 'net-ethtool-Untangle-PHYLIB-dependency'
Florian Fainelli says:
====================
net: ethtool: Untangle PHYLIB dependency
This patch series untangles the ethtool netlink dependency with PHYLIB
which exists because the cable test feature calls directly into PHY
library functions. The approach taken here is to introduce
ethtool_phy_ops function pointers which can be dynamically registered
when PHYLIB loads.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 6 Jul 2020 04:27:58 +0000 (21:27 -0700)]
net: ethtool: Remove PHYLIB direct dependency
Now that we have introduced ethtool_phy_ops and the PHY library
dynamically registers its operations with that function pointer, we can
remove the direct PHYLIB dependency in favor of using dynamic
operations.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 6 Jul 2020 04:27:57 +0000 (21:27 -0700)]
net: phy: Register ethtool PHY operations
Utilize ethtool_set_ethtool_phy_ops to register a suitable set of PHY
ethtool operations in a dynamic fashion such that ethtool will no longer
directy reference PHY library symbols.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 6 Jul 2020 04:27:56 +0000 (21:27 -0700)]
net: ethtool: Introduce ethtool_phy_ops
In order to decouple ethtool from its PHY library dependency, define an
ethtool_phy_ops singleton which can be overriden by the PHY library when
it loads with an appropriate set of function pointers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Mon, 6 Jul 2020 02:55:44 +0000 (19:55 -0700)]
Documentation: networking: fix ethtool-netlink table formats
Fix table formatting to eliminate warnings.
Documentation/networking/ethtool-netlink.rst:509: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:522: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:543: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:555: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:591: WARNING: Malformed table.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bartosz Golaszewski [Sun, 5 Jul 2020 09:55:47 +0000 (11:55 +0200)]
net: phy: add a Kconfig option for mdio_devres
If phylib is built as a module and CONFIG_MDIO_DEVICE is 'y', the
mdio_device and mdio_bus code will be in the phylib module, not in the
kernel image. Meanwhile we build mdio_devres depending on the
CONFIG_MDIO_DEVICE symbol, so if it's 'y', it will go into the kernel
and we'll hit the following linker error:
ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_alloc_size':
>> drivers/net/phy/mdio_devres.c:38: undefined reference to `mdiobus_alloc_size'
ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_free':
>> drivers/net/phy/mdio_devres.c:16: undefined reference to `mdiobus_free'
ld: drivers/net/phy/mdio_devres.o: in function `__devm_mdiobus_register':
>> drivers/net/phy/mdio_devres.c:87: undefined reference to `__mdiobus_register'
ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_unregister':
>> drivers/net/phy/mdio_devres.c:53: undefined reference to `mdiobus_unregister'
ld: drivers/net/phy/mdio_devres.o: in function `devm_of_mdiobus_register':
>> drivers/net/phy/mdio_devres.c:120: undefined reference to `of_mdiobus_register'
Add a hidden Kconfig option for MDIO_DEVRES which will be currently
selected by CONFIG_PHYLIB as there are no non-phylib users of these
helpers.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 7 Jul 2020 22:20:49 +0000 (15:20 -0700)]
Merge branch 'smsc-use-generic-power-management'
Vaibhav Gupta says:
====================
smsc: use generic power management
Linux Kernel Mentee: Remove Legacy Power Management.
The purpose of this patch series is to remove legacy power management callbacks
from smsc ethernet drivers.
The callbacks performing suspend() and resume() operations are still calling
pci_save_state(), pci_set_power_state(), etc. and handling the power management
themselves, which is not recommended.
The conversion requires the removal of the those function calls and change the
callback definition accordingly and make use of dev_pm_ops structure.
All patches are compile-tested only.
V2: Kbuild in V1, warning: variable 'err' is used uninitialized whenever 'if'
conditio is false in funcution .resume() .
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vaibhav Gupta [Fri, 3 Jul 2020 03:01:38 +0000 (08:31 +0530)]
smsc9420: use generic power management
Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions.
With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vaibhav Gupta [Fri, 3 Jul 2020 03:01:37 +0000 (08:31 +0530)]
epic100: use generic power management
Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves.
With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Tue, 7 Jul 2020 13:19:13 +0000 (15:19 +0200)]
mvpp2: fix pointer check
priv->page_pool is an array, so comparing against it will always return true.
Do a meaningful check by checking priv->page_pool[0] instead.
While at it, clear the page_pool pointers on deallocation, or when an
allocation error happens during init.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes:
c2d6fe6163de ("mvpp2: XDP TX support")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Tue, 7 Jul 2020 12:40:48 +0000 (14:40 +0200)]
mptcp: use mptcp worker for path management
We can re-use the existing work queue to handle path management
instead of a dedicated work queue. Just move pm_worker to protocol.c,
call it from the mptcp worker and get rid of the msk lock (already held).
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Tue, 7 Jul 2020 10:55:43 +0000 (18:55 +0800)]
sun/cassini: mark cas_resume() as __maybe_unused
In certain configurations without power management support, gcc report
the following warning:
drivers/net/ethernet/sun/cassini.c:5206:12: warning:
'cas_resume' defined but not used [-Wunused-function]
5206 | static int cas_resume(struct device *dev_d)
| ^~~~~~~~~~
Mark cas_resume() as __maybe_unused to make it clear.
Fixes:
f193f4ebde3d ("sun/cassini: use generic power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vaibhav Gupta [Tue, 7 Jul 2020 07:41:22 +0000 (13:11 +0530)]
sun/niu: add __maybe_unused attribute to PM functions
The upgraded .suspend() and .resume() throw
"defined but not used [-Wunused-function]" warning for certain
configurations.
Mark them with "__maybe_unused" attribute.
Compile-tested only.
Fixes:
b0db0cc2f695 ("sun/niu: use generic power management")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 7 Jul 2020 19:47:11 +0000 (12:47 -0700)]
Merge branch 'phy-warn'
Andrew Lunn says:
====================
drivers/net/phy C=1 W=1 fixes
This fixes most of the Sparse and W=1 warnings in drivers/net/phy. The
Cavium code is still not fully clean, but it might actually be the
strange code is confusing Sparse.
v2
--
Added RB, TB, AB.
s/case/cause
Reverse Christmas tree
Module soft dependencies
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 7 Jul 2020 01:49:39 +0000 (03:49 +0200)]
net: phy: mdio-octeon: Cleanup module loading dependencies
To ensure that the octeon MDIO driver has been loaded, the Cavium
ethernet drivers reference a dummy symbol in the MDIO driver. This
forces it to be loaded first. And this symbol has not been cleanly
implemented, resulting in warnings when build W=1 C=1.
Since device tree is being used, and a phandle points to the PHY on
the MDIO bus, we can make use of deferred probing. If the PHY fails to
connect, it should be because the MDIO bus driver has not loaded
yet. Return -EPROBE_DEFER so it will be tried again later.
Additionally, add a MODULE_SOFTDEP() to give user space a hint as to
what order it should load the modules.
v2:
s/octoen/octeon/
Add MODULE_SOFTDEP()
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: Robert Richter <rrichter@marvell.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 7 Jul 2020 01:49:38 +0000 (03:49 +0200)]
net: phy: cavium: Improve __iomem mess
The MIPS low level register access functions seem to be missing
__iomem annotation. This causes lots of sparse warnings, when code
casts off the __iomem. Make the Cavium MDIO drivers cleaner by pushing
the casts lower down into the helpers, allow the drivers to work as
normal, with __iomem.
bus->register_base is now an void *, rather than a u64. So forming the
mii_bus->id string cannot use %llx any more. Use %px, so this kernel
address is still exposed to user space, as it was before.
v2: s/cases/causes/g
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: Robert Richter <rrichter@marvell.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 7 Jul 2020 01:49:37 +0000 (03:49 +0200)]
net: phy: dp83640: Fixup cast to restricted __be16 warning
ntohs() expects to be passed a __be16. Correct the type of the
variable holding the sequence ID.
Cc: Richard Cochran <richardcochran@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 7 Jul 2020 01:49:36 +0000 (03:49 +0200)]
net: phy: Make phy_10gbit_fec_features_array static
This array is not used outside of phy_device.c, so make it static.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 7 Jul 2020 01:49:35 +0000 (03:49 +0200)]
net: phy: Properly define genphy_c45_driver
Avoid the W=1 warning that symbol 'genphy_c45_driver' was not
declared. Should it be static?
Declare it on the phy header file.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 7 Jul 2020 01:49:34 +0000 (03:49 +0200)]
net: phy: Fixup parameters in kerneldoc
Correct the kerneldoc for a few structure and function calls,
as reported by C=1 W=1.
Cc: Alexandru Ardelean <alexaundru.ardelean@analog.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 7 Jul 2020 01:49:33 +0000 (03:49 +0200)]
net: phy: at803x: Avoid comparison is always false warning
By placing the GENMASK value into an unsigned int and then passing it
to PREF_FIELD, the type is reduces down from ULL. Given the reduced
size of the type, the range checks in PREP_FAIL() are always true, and
-Wtype-limits then gives a warning.
By skipping the intermediate variable, the warning can be avoided.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Healy [Tue, 7 Jul 2020 01:27:07 +0000 (18:27 -0700)]
net: sfp: Unique GPIO interrupt names
Dynamically generate a unique GPIO interrupt name, based on the
device name and the GPIO name. For example:
103: 0 sx1503q 12 Edge sff2-los
104: 0 sx1503q 13 Edge sff2-tx-fault
The sffX indicates the SFP the los and tx-fault are associated with.
v3:
- reverse Christmas tree new variable
- fix spaces vs tabs
v2:
- added net-next to PATCH part of subject line
- switched to devm_kasprintf()
Signed-off-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Mon, 6 Jul 2020 21:53:41 +0000 (14:53 -0700)]
ice: add documentation for device-caps region
The recent change by commit
8d7aab3515fa ("ice: implement snapshot for
device capabilities") to implement the device-caps region for the ice
driver forgot to document it.
Add documentation to the ice devlink documentation file describing the
new region and add some sample output to the shell commands provided as
an example.
Fixes:
8d7aab3515fa ("ice: implement snapshot for device capabilities")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 6 Jul 2020 21:29:39 +0000 (14:29 -0700)]
net: systemport: Add support for VLAN transmit acceleration
SYSTEMPORT is capable of performing VLAN transmit acceleration, support
that by configuring it appropriately, providing the VLAN ID and PCP/DEI
where necessary.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Mon, 6 Jul 2020 19:06:12 +0000 (21:06 +0200)]
mptcp: fix race in subflow_data_ready()
syzkaller was able to make the kernel reach subflow_data_ready() for a
server subflow that was closed before subflow_finish_connect() completed.
In these cases we can avoid using the path for regular/fallback MPTCP
data, and just wake the main socket, to avoid the following warning:
WARNING: CPU: 0 PID: 9370 at net/mptcp/subflow.c:885
subflow_data_ready+0x1e6/0x290 net/mptcp/subflow.c:885
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 9370 Comm: syz-executor.0 Not tainted 5.7.0 #106
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xb7/0xfe lib/dump_stack.c:118
panic+0x29e/0x692 kernel/panic.c:221
__warn.cold+0x2f/0x3d kernel/panic.c:582
report_bug+0x28b/0x2f0 lib/bug.c:195
fixup_bug arch/x86/kernel/traps.c:105 [inline]
fixup_bug arch/x86/kernel/traps.c:100 [inline]
do_error_trap+0x10f/0x180 arch/x86/kernel/traps.c:197
do_invalid_op+0x32/0x40 arch/x86/kernel/traps.c:216
invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:subflow_data_ready+0x1e6/0x290 net/mptcp/subflow.c:885
Code: 04 02 84 c0 74 06 0f 8e 91 00 00 00 41 0f b6 5e 48 31 ff 83 e3 18
89 de e8 37 ec 3d fe 84 db 0f 85 65 ff ff ff e8 fa ea 3d fe <0f> 0b e9
59 ff ff ff e8 ee ea 3d fe 48 89 ee 4c 89 ef e8 f3 77 ff
RSP: 0018:
ffff88811b2099b0 EFLAGS:
00010206
RAX:
ffff888111197000 RBX:
0000000000000000 RCX:
ffffffff82fbc609
RDX:
0000000000000100 RSI:
ffffffff82fbc616 RDI:
0000000000000001
RBP:
ffff8881111bc800 R08:
ffff888111197000 R09:
ffffed10222a82af
R10:
ffff888111541577 R11:
ffffed10222a82ae R12:
1ffff11023641336
R13:
ffff888111541000 R14:
ffff88810fd4ca00 R15:
ffff888111541570
tcp_child_process+0x754/0x920 net/ipv4/tcp_minisocks.c:841
tcp_v4_do_rcv+0x749/0x8b0 net/ipv4/tcp_ipv4.c:1642
tcp_v4_rcv+0x2666/0x2e60 net/ipv4/tcp_ipv4.c:1999
ip_protocol_deliver_rcu+0x29/0x1f0 net/ipv4/ip_input.c:204
ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
NF_HOOK include/linux/netfilter.h:421 [inline]
ip_local_deliver+0x2da/0x390 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:441 [inline]
ip_rcv_finish net/ipv4/ip_input.c:428 [inline]
ip_rcv_finish net/ipv4/ip_input.c:414 [inline]
NF_HOOK include/linux/netfilter.h:421 [inline]
ip_rcv+0xef/0x140 net/ipv4/ip_input.c:539
__netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5268
__netif_receive_skb+0x27/0x1c0 net/core/dev.c:5382
process_backlog+0x1e5/0x6d0 net/core/dev.c:6226
napi_poll net/core/dev.c:6671 [inline]
net_rx_action+0x3e3/0xd70 net/core/dev.c:6739
__do_softirq+0x18c/0x634 kernel/softirq.c:292
do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082
</IRQ>
do_softirq.part.0+0x26/0x30 kernel/softirq.c:337
do_softirq arch/x86/include/asm/preempt.h:26 [inline]
__local_bh_enable_ip+0x46/0x50 kernel/softirq.c:189
local_bh_enable include/linux/bottom_half.h:32 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:723 [inline]
ip_finish_output2+0x78a/0x19c0 net/ipv4/ip_output.c:229
__ip_finish_output+0x471/0x720 net/ipv4/ip_output.c:306
dst_output include/net/dst.h:435 [inline]
ip_local_out+0x181/0x1e0 net/ipv4/ip_output.c:125
__ip_queue_xmit+0x7a1/0x14e0 net/ipv4/ip_output.c:530
__tcp_transmit_skb+0x19dc/0x35e0 net/ipv4/tcp_output.c:1238
__tcp_send_ack.part.0+0x3c2/0x5b0 net/ipv4/tcp_output.c:3785
__tcp_send_ack net/ipv4/tcp_output.c:3791 [inline]
tcp_send_ack+0x7d/0xa0 net/ipv4/tcp_output.c:3791
tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6040 [inline]
tcp_rcv_state_process+0x36a4/0x49c2 net/ipv4/tcp_input.c:6209
tcp_v4_do_rcv+0x343/0x8b0 net/ipv4/tcp_ipv4.c:1651
sk_backlog_rcv include/net/sock.h:996 [inline]
__release_sock+0x1ad/0x310 net/core/sock.c:2548
release_sock+0x54/0x1a0 net/core/sock.c:3064
inet_wait_for_connect net/ipv4/af_inet.c:594 [inline]
__inet_stream_connect+0x57e/0xd50 net/ipv4/af_inet.c:686
inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:725
mptcp_stream_connect+0x171/0x5f0 net/mptcp/protocol.c:1920
__sys_connect_file net/socket.c:1854 [inline]
__sys_connect+0x267/0x2f0 net/socket.c:1871
__do_sys_connect net/socket.c:1882 [inline]
__se_sys_connect net/socket.c:1879 [inline]
__x64_sys_connect+0x6f/0xb0 net/socket.c:1879
do_syscall_64+0xb7/0x3d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fb577d06469
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48
RSP: 002b:
00007fb5783d5dd8 EFLAGS:
00000246 ORIG_RAX:
000000000000002a
RAX:
ffffffffffffffda RBX:
000000000068bfa0 RCX:
00007fb577d06469
RDX:
000000000000004d RSI:
0000000020000040 RDI:
0000000000000003
RBP:
00000000ffffffff R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
000000000041427c R14:
00007fb5783d65c0 R15:
0000000000000003
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/39
Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes:
e1ff9e82e2ea ("net: mptcp: improve fallback to TCP")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander A. Klimov [Mon, 6 Jul 2020 17:38:50 +0000 (19:38 +0200)]
Replace HTTP links with HTTPS ones: IPv*
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 6 Jul 2020 20:18:56 +0000 (13:18 -0700)]
Merge branch 'qed-warnings-cleanup'
Alexander Lobakin says:
====================
net: qed/qede: W=1 C=1 warnings cleanup
This set cleans qed/qede build log under W=1 C=1 with GCC 8 and
sparse 0.6.2. The only thing left is "context imbalance -- unexpected
unlock" in one of the source files, which will be issued later during
the refactoring cycles.
The biggest part is handling the endianness warnings. The current code
often just assumes that both host and device operate in LE, which is
obviously incorrect (despite the fact that it's true for x86 platforms),
and makes sparse {s,m}ad.
The rest of the series is mostly random non-functional fixes
here-and-there.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Mon, 6 Jul 2020 15:38:21 +0000 (18:38 +0300)]
net: qede: fix BE vs CPU comparison
Flow Dissector's keys are mostly Network / Big Endian. U{16,32}_MAX are
the same in either of byteorders, but let's make sparse happy with
wrapping them into noops.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Mon, 6 Jul 2020 15:38:20 +0000 (18:38 +0300)]
net: qede: fix kernel-doc for qede_ptp_adjfreq()
One of the function arguments was renamed some time ago, but this
wasn't reflected in its kernel-doc comment.
Also add the description for return values.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Mon, 6 Jul 2020 15:38:19 +0000 (18:38 +0300)]
net: qed: sanitize BE/LE data processing
Current code assumes that both host and device operates in Little Endian
in lots of places. While this is true for x86 platform, this doesn't mean
we should not care about this.
This commit addresses all parts of the code that were pointed out by sparse
checker. All operations with restricted (__be*/__le*) types are now
protected with explicit from/to CPU conversions, even if they're noops on
common setups.
I'm sure there are more such places, but this implies a deeper code
investigation, and is a subject for future works.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Mon, 6 Jul 2020 15:38:18 +0000 (18:38 +0300)]
net: qed: use ptr shortcuts to dedup field accessing in some parts
Use intermediate pointers instead of multiple dereferencing to
simplify and beautify parts of code that will be addressed in
the next commit.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Mon, 6 Jul 2020 15:38:17 +0000 (18:38 +0300)]
net: qed: improve indentation of some parts of code
To not mix functional and stylistic changes, correct indentation
of code that will be modified in the subsequent commits.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Mon, 6 Jul 2020 15:38:16 +0000 (18:38 +0300)]
net: qed: address kernel-doc warnings
Get rid of the kernel-doc warnings when building with W=1+ by
rewriting the problematic doc comments according to the
recommended format and style.
Note that this only fixes problems found in C source files,
headers aren't in scope for now.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Mon, 6 Jul 2020 15:38:15 +0000 (18:38 +0300)]
net: qed: correct qed_hw_err_notify() prototype
Change the prototype of qed_hw_err_notify() with the following:
* constify "fmt" argument according to printk() declarations;
* anontate it with __cold attribute to move the function out of
the line;
* annotate it with __printf() attribute;
This eliminates W=1+ warning:
drivers/net/ethernet/qlogic/qed/qed_hw.c: In function
‘qed_hw_err_notify’:
drivers/net/ethernet/qlogic/qed/qed_hw.c:851:3: warning: function
‘qed_hw_err_notify’ might be a candidate for ‘gnu_printf’ format
attribute [-Wsuggest-attribute=format]
len = vsnprintf(buf, QED_HW_ERR_MAX_STR_SIZE, fmt, vl);
^~~
as well as saves some code size:
add/remove: 0/0 grow/shrink: 2/4 up/down: 40/-125 (-85)
Function old new delta
qed_dmae_execute_command 1680 1711 +31
qed_spq_post 1104 1113 +9
qed_int_sp_dpc 3554 3545 -9
qed_mcp_cmd_and_union 1896 1876 -20
qed_hw_err_notify 395 352 -43
qed_mcp_handle_events 2630 2577 -53
Total: Before=368645, After=368560, chg -0.02%
__printf() will also be helpful with catching bad format strings
and arguments.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Mon, 6 Jul 2020 15:38:14 +0000 (18:38 +0300)]
net: qed: cleanup global structs declarations
Fix several sparse warnings by moving structs declarations into
the corresponding header files:
drivers/net/ethernet/qlogic/qed/qed_dcbx.c:2402:32: warning:
symbol 'qed_dcbnl_ops_pass' was not declared. Should it be static?
drivers/net/ethernet/qlogic/qed/qed_ll2.c:2754:26: warning: symbol
'qed_ll2_ops_pass' was not declared. Should it be static?
drivers/net/ethernet/qlogic/qed/qed_ptp.c:449:30: warning: symbol
'qed_ptp_ops_pass' was not declared. Should it be static?
drivers/net/ethernet/qlogic/qed/qed_sriov.c:5265:29: warning:
symbol 'qed_iov_ops_pass' was not declared. Should it be static?
(some of them were declared twice in different header files)
Also make qed_hw_err_type_descr[] const while at it.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Mon, 6 Jul 2020 15:38:13 +0000 (18:38 +0300)]
net: qed: move static iro_arr[] out of header file
Static variables (and functions, unless they're inline) should not
be declared in header files.
Move the static array iro_arr[] from "qed_hsi.h" to the sole place
where it's used, "qed_init_ops.c". This eliminates lots of warnings
(42 of them actually) against W=1+:
In file included from drivers/net/ethernet/qlogic/qed/qed.h:51:0,
from drivers/net/ethernet/qlogic/qed/qed_ooo.c:40:
drivers/net/ethernet/qlogic/qed/qed_hsi.h:4421:18: warning: 'iro_arr'
defined but not used [-Wunused-const-variable=]
static const u32 iro_arr[] = {
^~~~~~~
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Mon, 6 Jul 2020 15:18:08 +0000 (17:18 +0200)]
geneve: move all configuration under struct geneve_config
This patch adds a new structure geneve_config and moves the per-device
configuration attributes to it, like we already have in VXLAN with
struct vxlan_config. This ends up being pretty invasive since those
attributes are used everywhere.
This allows us to clean up the argument lists for geneve_configure (4
arguments instead of 8) and geneve_nl2info (5 instead of 9).
This also reduces the copy-paste of code setting those attributes
between geneve_configure and geneve_changelink to a single memcpy,
which would have avoided the bug fixed in commit
56c09de347e4 ("geneve: allow changing DF behavior after creation").
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Mon, 6 Jul 2020 14:55:54 +0000 (17:55 +0300)]
dpaa2-eth: fix draining of S/G cache
On link down, the draining of the S/G cache should be done on all
_possible_ CPUs not just the ones that are online in that moment.
Fix this by changing the iterator.
Fixes:
d70446ee1f40 ("dpaa2-eth: send a scatter-gather FD instead of realloc-ing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tang Bin [Mon, 6 Jul 2020 14:47:01 +0000 (22:47 +0800)]
net/amd: Remove needless assignment and the extra brank lines
The variable 'err = -ENODEV;' in au1000_probe() is
duplicate, so remove redundant one. And remove the
extra blank lines in the file au1000_eth.c
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Mon, 6 Jul 2020 12:44:08 +0000 (14:44 +0200)]
selftests: mptcp: capture pcap on both sides
When investigating performance issues that involve latency / loss /
reordering it is useful to have the pcap from the sender-side as it
allows to easier infer the state of the sender's congestion-control,
loss-recovery, etc.
Allow the selftests to capture a pcap on both sender and receiver so
that this information is not lost when reproducing.
This patch also improves the file names. Instead of:
ns4-
5ee79a56-X4O6gS-ns3-
5ee79a56-X4O6gS-MPTCP-MPTCP-10.0.3.1.pcap
We now have something like for the same test:
5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-connector.pcap
5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-listener.pcap
It was a connection from ns3 to ns4, better to start with ns3 then. The
port is also added, easier to find the trace we want.
Co-developed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 6 Jul 2020 19:24:15 +0000 (12:24 -0700)]
Merge branch 'ethernet-sun-use-generic-power-management'
Vaibhav Gupta says:
====================
ethernet: sun: use generic power management
Linux Kernel Mentee: Remove Legacy Power Management.
The purpose of this patch series is to remove legacy power management callbacks
from sun ethernet drivers.
The callbacks performing suspend() and resume() operations are still calling
pci_save_state(), pci_set_power_state(), etc. and handling the power management
themselves, which is not recommended.
The conversion requires the removal of the those function calls and change the
callback definition accordingly and make use of dev_pm_ops structure.
All patches are compile-tested only.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vaibhav Gupta [Mon, 6 Jul 2020 08:57:46 +0000 (14:27 +0530)]
sun/cassini: use generic power management
With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.
After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vaibhav Gupta [Mon, 6 Jul 2020 08:57:45 +0000 (14:27 +0530)]
sun/niu: use generic power management
With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.
After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.
The driver was calling pci_save/restore_state() which is no more needed.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vaibhav Gupta [Mon, 6 Jul 2020 08:57:44 +0000 (14:27 +0530)]
sun/sungem: use generic power management
With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states. And they use PCI
helper functions to do it.
After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.
In this driver:
gem_suspend() calls gem_do_stop() which in turn invokes
pci_disable_device(). As the PCI helper function is not called at the
end/start of the function body, breaking the function in two parts
may change its behavior.
The only other function invoking gem_do_stop() is gem_close(). Hence,
gem_close() and gem_suspend() can do the required end steps on their own.
The same case is with gem_resume(). Both gem_resume() and gem_open()
invoke gem_do_start(). Again, make the caller functions do the required
steps on their own.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 21:05:08 +0000 (23:05 +0200)]
net: dsa: vitesse-vsc73xx: Convert to plain comments to avoid kerneldoc warnings
The comments before struct vsc73xx_platform and struct vsc73xx_spi use
kerneldoc format, but then fail to document the members of these
structures. All the structure members are self evident, and the driver
has not other kerneldoc comments, so change these to plain comments to
avoid warnings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 20:55:55 +0000 (22:55 +0200)]
net: dsa: lan9303: fix variable 'res' set but not used
Since lan9303_adjust_link() is a void function, there is no option to
return an error. So just remove the variable and lets any errors be
discarded.
Cc: Egil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 20:42:27 +0000 (22:42 +0200)]
net: dsa: rtl8366: Pass GENMASK() signed bits
Oddly, GENMASK() requires signed bit numbers, so that it can compare
them for < 0. If passed an unsigned type, we get warnings about the
test never being true.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Jul 2020 22:45:38 +0000 (15:45 -0700)]
Merge branch 'net-dsa-b53-sf2-warn'
Andrew Lunn says:
====================
dsa: b53/sf2
Fixup most of the C=1 W=1 warnings in these drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 20:36:25 +0000 (22:36 +0200)]
net: dsa: bcm_sf2: Pass GENMASK() signed bits
Oddly, GENMASK() requires signed bit numbers, so that it can compare
them for < 0. If passed an unsigned type, we get warnings about the
test never being true. There is no danger of overflow here, udf is
always a u8, so there is plenty of space when expanding to an int.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 20:36:24 +0000 (22:36 +0200)]
net: dsa: bcm_sf2: Initialize __be16 with a __be16 value
A __be16 variable should be initialised with a __be16 value. So add a
htons(). In this case it is pointless, given the value being assigned
is 0xffff, but it stops sparse from warnings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 20:36:23 +0000 (22:36 +0200)]
net: dsa: b53: Fixup endianness warnings
leX_to_cpu() expects to be passed an __leX type.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Jul 2020 22:43:01 +0000 (15:43 -0700)]
Merge branch 'net--dsa-mv88e6xxx-warn'
Andrew Lunn says:
====================
net: dsa: mv88e6xxx: Fixup C=1 W=1 warnings
Make the mv88e6xxx driver build cleanly with C=1 W=1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 19:38:10 +0000 (21:38 +0200)]
net: dsa: mv88e6xxx: scratch: Fixup kerneldoc
Correct parameters and add the missing ones.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 19:38:09 +0000 (21:38 +0200)]
net: dsa: mv88e6xxx: Remove set but unused variable
We don't act on any errors reading registers while handling watchdog
interrupt. Since this is an interrupt handler, we cannot return such
errors. So just remove the variable.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 19:38:08 +0000 (21:38 +0200)]
net: dsa: mv88e6xxx: vlan_tci is __be16
The flow spec member vlan_tci is in network order. Hence comparisons
should be made again network order values.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 19:38:07 +0000 (21:38 +0200)]
net: dsa: mv88e6xxx: Fix sparse warnings from GENMASK
Oddly, GENMASK() requires signed bit numbers, so that it can compare
them for < 0. If passed an unsigned type, we get warnings about the
test never being true.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Jul 2020 22:31:58 +0000 (15:31 -0700)]
Merge branch 'net-dsa-warnings'
Andrew Lunn says:
====================
net: dsa: Fix C=1 W=1 warnings
Mostly not using __be16 when decoding packet contents.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 19:30:08 +0000 (21:30 +0200)]
net: dsa: tag_qca.c: Fix warning for __be16 vs u16
net/dsa/tag_qca.c:48:15: warning: incorrect type in assignment (different base types)
net/dsa/tag_qca.c:48:15: expected unsigned short [usertype]
net/dsa/tag_qca.c:48:15: got restricted __be16 [usertype]
net/dsa/tag_qca.c:68:13: warning: incorrect type in assignment (different base types)
net/dsa/tag_qca.c:68:13: expected restricted __be16 [usertype] hdr
net/dsa/tag_qca.c:68:13: got int
net/dsa/tag_qca.c:71:16: warning: restricted __be16 degrades to integer
net/dsa/tag_qca.c:81:17: warning: restricted __be16 degrades to integer
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 19:30:07 +0000 (21:30 +0200)]
net: dsa: tag_mtk: Fix warnings for __be16
net/dsa/tag_mtk.c:84:13: warning: incorrect type in assignment (different base types)
net/dsa/tag_mtk.c:84:13: expected restricted __be16 [usertype] hdr
net/dsa/tag_mtk.c:84:13: got int
net/dsa/tag_mtk.c:94:17: warning: restricted __be16 degrades to integer
The result of a ntohs() is not __be16, but u16.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 19:30:06 +0000 (21:30 +0200)]
net: dsa: tag_lan9303: Fix __be16 warnings
net/dsa/tag_lan9303.c:76:24: warning: incorrect type in assignment (different base types)
net/dsa/tag_lan9303.c:76:24: expected unsigned short [usertype]
net/dsa/tag_lan9303.c:76:24: got restricted __be16 [usertype]
net/dsa/tag_lan9303.c:80:24: warning: incorrect type in assignment (different base types)
net/dsa/tag_lan9303.c:80:24: expected unsigned short [usertype]
net/dsa/tag_lan9303.c:80:24: got restricted __be16 [usertype]
net/dsa/tag_lan9303.c:106:31: warning: restricted __be16 degrades to integer
net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16
net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16
net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16
net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16
Make use of __be16 where appropriate to fix these warnings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 19:30:05 +0000 (21:30 +0200)]
net: dsa: tag_ksz: Fix __be16 warnings
cpu_to_be16 returns a __be16 value. So what it is assigned to needs to
have the same type to avoid warnings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 5 Jul 2020 19:30:04 +0000 (21:30 +0200)]
net: dsa: Add __percpu property to prevent warnings
net/dsa/slave.c:505:13: warning: incorrect type in initializer (different address spaces)
net/dsa/slave.c:505:13: expected void const [noderef] <asn:3> *__vpp_verify
net/dsa/slave.c:505:13: got struct pcpu_sw_netstats *
Add the needed _percpu property to prevent this warning.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Jul 2020 22:25:59 +0000 (15:25 -0700)]
Merge branch 'Phylink-integration-improvements-for-Felix-DSA-driver'
Vladimir Oltean says:
====================
Phylink integration improvements for Felix DSA driver
This is an overhaul of the Felix switch driver's phylink operations.
Patches 1, 3, 4 and 5 are cleanup, patch 2 is adding a new feature and
and patch 6 is adaptation to the new format of an existing phylink API
(mac_link_up).
Changes since v2:
- Replaced "PHYLINK" with "phylink".
- Rewrote commit message of patch 5/6.
Changes since v1:
- Now using phy_clear_bits and phy_set_bits instead of plain writes to
MII_BMCR. This combines former patches 1/7 and 6/7 into a single new
patch 1/6.
- Updated commit message of patch 5/6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 5 Jul 2020 16:16:26 +0000 (19:16 +0300)]
net: dsa: felix: use resolved link config in mac_link_up()
Phylink now requires that parameters established through
auto-negotiation be written into the MAC at the time of the
mac_link_up() callback. In the case of felix, that means taking the port
out of reset, setting the correct timers for PAUSE frames, and
enabling/disabling TX flow control.
This patch also splits the inband and noinband configuration of the
vsc9959 PCS (currently found in a function called "init") into 2
different functions, which have a nomenclature closer to phylink:
"config", for inband setup, and "link_up", for noinband (forced) setup.
This is necessary as a preparation step for giving up control of the PCS
to phylink, which will be done in further patch series.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 5 Jul 2020 16:16:25 +0000 (19:16 +0300)]
net: dsa: felix: delete .phylink_mac_an_restart code
Phylink uses the .mac_an_restart method to offer the user an
implementation of the "ethtool -r" behavior, when the media-side auto
negotiation can be restarted by the local MAC PCS. This is the case for
fiber modes 1000Base-X and 2500Base-X (IEEE clause 37) that don't have
an Ethernet PHY connected locally, and the media is connected to the MAC
PCS directly.
On the other hand, the Cisco SGMII and USXGMII standards also have an
auto negotiation mechanism based on IEEE 802.3 clause 37 (their
respective specs require a MAC PCS and a PHY PCS to implement the same
state machine, which is described in IEEE 802.3 "Auto-Negotiation Figure
37-6"), so the ability to restart auto-negotiation is intrinsically
symmetrical (the MAC PCS can do it too).
However, it appears that not all SGMII/USXGMII PHYs have logic to
restart the MDI-side auto-negotiation process when they detect a
transition of the SGMII link from data mode to configuration mode.
Some do (VSC8234) and some don't (AR8033, MV88E1111). IEEE and/or Cisco
specification wordings to not help to prove whether propagating the "AN
restart" event from MII side ("mr_restart_an") to MDI side
("mr_restart_negotiation") is required behavior - neither of them
specifies any mandatory interaction between the clause 37 AN state
machine from Figure 37-6 and the clause 28 AN state machine from Figure
28-18.
Therefore, even if a certain behavior could be proven as being required,
real-life SGMII/USXGMII PHYs are inconsistent enough that a clause 37 AN
restart cannot be used by phylink to reliably trigger a media-side
renegotiation, when the user requests it via ethtool.
The only remaining use that the .mac_an_restart callback might possibly
have, given what we know now, is to implement some silicon quirks, but
so far that has proven to not be necessary.
So remove this code for now, since it never gets called and we don't
foresee any circumstance in which it might be, either.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 5 Jul 2020 16:16:24 +0000 (19:16 +0300)]
net: dsa: felix: set proper pause frame timers based on link speed
state->speed holds a value of 10, 100, 1000 or 2500, but
SYS_MAC_FC_CFG_FC_LINK_SPEED expects a value in the range 0, 1, 2 or 3.
So set the correct speed encoding into this register.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 5 Jul 2020 16:16:23 +0000 (19:16 +0300)]
net: dsa: felix: unconditionally configure MAC speed to 1000Mbps
In VSC9959, the PCS is the one who performs rate adaptation (symbol
duplication) to the speed negotiated by the PHY. The MAC is unaware of
that and must remain configured for gigabit. If it is configured at
OCELOT_SPEED_10 or OCELOT_SPEED_100, it'll start transmitting PAUSE
frames out of control and never recover, _even if_ we then reconfigure
it at OCELOT_SPEED_1000 afterwards.
This patch fixes a bug that luckily did not have any functional impact.
We were writing 10, 100, 1000 etc into this 2-bit field in
DEV_CLOCK_CFG, but the hardware expects values in the range 0, 1, 2, 3.
So all speed values were getting truncated to 0, which is
OCELOT_SPEED_2500, and which also appears to be fine.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 5 Jul 2020 16:16:22 +0000 (19:16 +0300)]
net: dsa: felix: support half-duplex link modes
Ping tested:
[ 11.808455] mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 11.816497] IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready
[root@LS1028ARDB ~] # ethtool -s swp0 advertise 0x4
[ 18.844591] mscc_felix 0000:00:00.5 swp0: Link is Down
[ 22.048337] mscc_felix 0000:00:00.5 swp0: Link is Up - 100Mbps/Half - flow control off
[root@LS1028ARDB ~] # ip addr add 192.168.1.1/24 dev swp0
[root@LS1028ARDB ~] # ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2): 56 data bytes
(...)
^C--- 192.168.1.2 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.383/0.611/1.051 ms
[root@LS1028ARDB ~] # ethtool -s swp0 advertise 0x10
[ 355.637747] mscc_felix 0000:00:00.5 swp0: Link is Down
[ 358.788034] mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Half - flow control off
[root@LS1028ARDB ~] # ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2): 56 data bytes
(...)
^C
--- 192.168.1.2 ping statistics ---
16 packets transmitted, 16 packets received, 0% packet loss
round-trip min/avg/max = 0.301/0.384/1.138 ms
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 5 Jul 2020 16:16:21 +0000 (19:16 +0300)]
net: dsa: felix: clarify the intention of writes to MII_BMCR
The driver appears to write to BMCR_SPEED and BMCR_DUPLEX, fields which
are read-only, since they are actually configured through the
vendor-specific IF_MODE (0x14) register.
But the reason we're writing back the read-only values of MII_BMCR is to
alter these writable fields:
BMCR_RESET
BMCR_LOOPBACK
BMCR_ANENABLE
BMCR_PDOWN
BMCR_ISOLATE
BMCR_ANRESTART
In particular, the only field which is really relevant to this driver is
BMCR_ANENABLE. Clarify that intention by spelling it out, using
phy_set_bits and phy_clear_bits.
The driver also made a few writes to BMCR_RESET and BMCR_ANRESTART which
are unnecessary and may temporarily disrupt the link to the PHY. Remove
them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Jul 2020 01:02:06 +0000 (18:02 -0700)]
Merge branch 'qlogic-use-generic-power-management'
Vaibhav Gupta says:
====================
qlogic: use generic power management
Linux Kernel Mentee: Remove Legacy Power Management.
The purpose of this patch series is to remove legacy power management callbacks
from qlogic ethernet drivers.
The callbacks performing suspend() and resume() operations are still calling
pci_save_state(), pci_set_power_state(), etc. and handling the power management
themselves, which is not recommended.
The conversion requires the removal of the those function calls and change the
callback definition accordingly and make use of dev_pm_ops structure.
All patches are compile-tested only.
V2: Fix unused variable warning in v1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vaibhav Gupta [Thu, 2 Jul 2020 17:01:43 +0000 (22:31 +0530)]
qlcninc: use generic power management
With legacy PM, drivers themselves were responsible for managing the
device's power states and taking care of register states. And they use PCI
helper functions to do it.
After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.
.suspend() calls __qlcnic_shutdown, which then calls qlcnic_82xx_shutdown;
.resume() calls __qlcnic_resume, which then calls qlcnic_82xx_resume;
Both ...82xx..() are define in
drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c and are used only in
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c.
Hence upgrade them and remove PCI function calls, like pci_save_state() and
pci_enable_wake(), inside them
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vaibhav Gupta [Thu, 2 Jul 2020 17:01:42 +0000 (22:31 +0530)]
netxen_nic: use generic power management
With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states. And they use PCI
helper functions to do it.
After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.
In this driver:
netxen_nic_resume() calls netxen_nic_attach_func() which then invokes PCI
helper functions like pci_enable_device(), pci_set_power_state() and
pci_restore_state(). Other function:
- netxen_io_slot_reset()
also calls netxen_nic_attach_func().
Also, netxen_io_slot_reset() returns specific value based on the return value
of netxen_nic_attach_func() as whole. Thus, cannot simply move some piece of
code from netxen_nic_attach_func() to it.
Hence, define a new function netxen_nic_attach_late_func() to do the tasks
which has to be done after PCI helper functions have done their job.
Now, netxen_nic_attach_func() invokes netxen_nic_attach_late_func(), thus
netxen_io_slot_reset() behaves normally.
And, netxen_nic_resume() calls netxen_nic_attach_late_func() to avoid PCI
helper functions calls.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>