OSDN Git Service
Hank Janssen [Fri, 22 Jan 2010 19:17:50 +0000 (19:17 +0000)]
Staging: hv: Remove xen legacy code and check for Hyper-V
Removed legacy XEN layer from hypervisor setup, and made sure only
Hyper-V is Is a valid hypervisor to run on.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 8 Jan 2010 18:25:01 +0000 (10:25 -0800)]
Staging: hv: remove unneeded OnClose callback
This callback only calls one function, so just call the function
instead, no need for indirection at all.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 8 Jan 2010 18:24:42 +0000 (10:24 -0800)]
Staging: hv: remove unneeded OnOpen callback
This callback only calls one function, so just call the function
instead, no need for indirection at all.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 8 Jan 2010 18:24:26 +0000 (10:24 -0800)]
Staging: hv: remove unneeded OnHostReset callback
This callback only calls one function, so just call the function
instead, no need for indirection at all.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 8 Jan 2010 18:21:58 +0000 (10:21 -0800)]
Staging: hv: storvsc_drv: move unused functions
Now that the callback pointer was removed, we can remove
the code itself, as it is never used.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 8 Jan 2010 18:20:27 +0000 (10:20 -0800)]
Staging: hv: remove unneeded OnHostRescan callback
This callback was never called, so delete the thing.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Lüssing [Sat, 2 Jan 2010 10:30:52 +0000 (11:30 +0100)]
Staging: batman-adv: Dont deactivate aggregation on wrong input
A non-integer changes the aggregation mode. Therefore this patch changes
the behaviour to explicitly check strict_strtoul()'s return code.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Wunderlich [Sat, 2 Jan 2010 10:30:51 +0000 (11:30 +0100)]
Staging: batman-adv: Remove compat.h
Since we are now part of mainline, we don't need compat.h to allow
building of the module with old versions of the kernel.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Lunn [Sat, 2 Jan 2010 10:30:50 +0000 (11:30 +0100)]
Staging: batman-adv: Use printk(%pM) for MAC addresses
printk() since kernel version 2.6.29 has supported printing MAC
addresses directly, as an extension to the %p processing. This patch
makes use of this for printk() and bat_dbg(). This will remove the
overhead of using addr_to_string() which is normally never actually
output.
Fixed a typo found by Gus Wirth.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Lunn [Sat, 2 Jan 2010 10:30:49 +0000 (11:30 +0100)]
Staging: batman-adv: Allow the MAC address to be set
Some embedded devices have very limited sources of entropy for the
random number generator. It has been observed that the random MAC
address on the interface bat0 is not always random. When testing with
a collection of identical hardware, sometimes the bat0 device the same
MAC address on multiple devices, causing mayhem. This patch allows the
MAC address to be set by the user.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Wunderlich [Sat, 2 Jan 2010 10:30:48 +0000 (11:30 +0100)]
Staging: batman-adv: receive packets directly using skbs
This patch removes the (ugly and racy) packet receiving thread and the
kernel socket usage. Instead, packets are received directly by registering
the ethernet type and handling skbs instead of self-allocated buffers.
Some consequences and comments:
* we don't copy the payload data when forwarding/sending/receiving data
anymore. This should boost performance.
* packets from/to different interfaces can be (theoretically) processed
simultaneously. Only the big originator hash lock might be in the way.
* no more polling or sleeping/wakeup/scheduling issues when receiving
packets
* this might introduce new race conditions.
* aggregation and vis code still use packet buffers and are not (yet)
converted.
* all spinlocks were converted to irqsave/restore versions to solve
some lifelock issues when preempted. This might be overkill, some
of these locks might be reverted later.
* skb copies are only done if neccesary to avoid overhead
performance differences:
* we made some "benchmarks" with intel laptops.
* bandwidth on Gigabit Ethernet increased from ~500 MBit/s to ~920 MBit/s
* ping latency decresed from ~2ms to ~0.2 ms
I did some tests on my 9 node qemu environment and could confirm that
usual sending/receiving, forwarding, vis, batctl ping etc works.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Wunderlich [Sat, 2 Jan 2010 10:30:47 +0000 (11:30 +0100)]
Staging: batman-adv: check all kmalloc()s
there are some kmallocs left which are not checked whether they succeeds or
not, which might lead to corrupted data structures if the system memory is
full. This patch should clean up the remaining unchecked kmalloc()s.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Sat, 2 Jan 2010 10:30:46 +0000 (11:30 +0100)]
Staging: batman-adv: splitting /proc vis file into vis_server and vis_data
The /proc vis file was used to enable/disable the vis server and to output
the vis data at the same time. This behaviour was confusing and lacked a
proper method to display the current vis server status.
This patch seperates the 2 functionalities:
* use vis_server to enable/disable the vis server and to retrieve its status
* use vis_data to retrieve the vis raw data (if the server is enabled)
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Luessing [Sat, 2 Jan 2010 10:30:45 +0000 (11:30 +0100)]
Staging: batman-adv: remove obsoleted vis_format /proc file
batman-adv used to export the vis data using different formats that were
switchable via /proc/net/batman-adv/vis_format. The various formats moved
to user space and rendered this configuration switch useless.
Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Lunn [Sat, 2 Jan 2010 10:30:44 +0000 (11:30 +0100)]
Staging: batman-adv: moving vis output formats out of the kernel
The batman-adv kernel module is able to output visualization data using the
dot draw or JSON format. This patch transforms the output into a generic
format (called vis raw). User space tool may convert the raw data to support
a variety of formats without the need of modifying the kernel module.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Sat, 2 Jan 2010 10:30:43 +0000 (11:30 +0100)]
Staging: batman-adv: fix minor orig table layout bug
The originator table contained a TAB instead of a space which broke
the layout as well as the batctl parser.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Lüssing [Sat, 2 Jan 2010 10:30:42 +0000 (11:30 +0100)]
Staging: batman-adv: Fixes rounding issues in vis.c
This patches fixes two rounding issues in vis.c for sending and
purging vis packets. Before, the timers and timeouts always got
rounded down to seconds, though we want a precision in
milliseconds.
This also fixes a kernel panic that occures when lowering the
timer for sending vis packets (vis_interval) to less than 1000ms
in main.c manually.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Eckelmann [Sat, 2 Jan 2010 10:30:41 +0000 (11:30 +0100)]
Staging: batman-adv: Use forw_bcast_list_lock always with disabled interrupts
forw_bcast_list_lock is spin_locked in both process and softirq context.
SoftIRQ calls the spinlock with disabled IRQ and normal process context
with enabled IRQs.
When process context is inside an spin_locked area protected by
forw_bcast_list_lock and gets interrupted by an IRQ, it could happen
that something tries to lock forw_bcast_list_lock again in SoftIRQ
context. It cannot proceed further since the lock is already taken
somewhere else, but no reschedule will happen inside the SoftIRQ
context. This leads to an complete kernel hang without any chance of
resurrection.
All functions called in process context must disable IRQs when they try
to get get that lock to to prevent any reschedule due to IRQs.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Wunderlich [Sat, 2 Jan 2010 10:30:40 +0000 (11:30 +0100)]
Staging: batman-adv: consistent spelling of "neighbors"
we have written "neighbors", "neighbours" and bad spelled versions of this
word, this patch should make it consistent.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Wunderlich [Sat, 2 Jan 2010 10:30:39 +0000 (11:30 +0100)]
Staging: batman-adv: initialize static hash iterators
instead of dynamically registering hash iterators, calling functions are
changed to register the iterator objects statically. The two advantages are:
* no memory leaks when aborting from hash_iterate()
* no calls to kmalloc/kfree, therefore a little faster/safer
Tested with 9 QEMU instances, no obvious regression found.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Lunn [Sat, 2 Jan 2010 10:30:38 +0000 (11:30 +0100)]
Staging: batman-adv: Replace KERN_DEBUG with bat_dbg
Ameya Palande requested we replace printk(KERN_DEBUG "") by pr_debug()
I decided it was better to use our debug macro.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Wunderlich [Sat, 2 Jan 2010 10:30:37 +0000 (11:30 +0100)]
Staging: batman-adv: update README for latest kernel
state in the README that we also (compile) support 2.6.32
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Eckelmann [Sat, 2 Jan 2010 10:30:36 +0000 (11:30 +0100)]
Staging: batman-adv: Remove NULL pointer check
It is safe to call kfree(NULL) which makes this extra check unneeded. It
was found using checkpatch.pl from linux-2.6
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roel Kluin [Sat, 26 Dec 2009 19:00:47 +0000 (20:00 +0100)]
Staging: rt2860: test off by one in RtmpAsicSendCommandToMcu()
`i' reaches 101 after the loop, so if it was 100 then it succeeded in
the last iteration. This is probably unlikely to cause problems.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roel Kluin [Wed, 23 Dec 2009 01:36:43 +0000 (02:36 +0100)]
Staging: rtl8192u: ieee80211: add missing parentheses
not(!) has a higher precedence than bit and(&).
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jarod Wilson [Mon, 4 Jan 2010 23:02:27 +0000 (18:02 -0500)]
staging: add Broadcom Crystal HD driver
This patch supersedes the earlier ones sent by Manu Abraham to add
the Broadcom Crystal HD driver to the staging tree, per discussion
with him about it. I've been working with Broadcom's Naren Sankar
on this driver for a number of months, and had already talked Naren
about submitting this on Broadcom's behalf, didn't expect anyone
else to jump on submitting it as quickly as Manu did. ;)
This version is a one-shot deal, incorporating the original driver,
Manu's coding style clean-ups, udev device creation support from
Edgar 'gimli' Hucek, and a number of other small tweaks from myself
and Scott Davilla, the other individual who has been working closely
on this code with Naren and I.
I've tested this iteration of the code lightly on a mini pci-e board
in a ThinkPad T61p running x86_64 Fedora 12, with the expected results,
and will test further on other systems with other variants of the card
(I have three varieties of this device currently in hand). Scott has
also tested on assorted primarily i686 varieties of Ubuntu, and Naren
has tested with both Fedora and Ubuntu, iirc.
Note: only the 70012 is currently supported by this driver, 70015
support will follow later. Also note that Blu-Ray support isn't
enabled (at the firmware level), due to misc fun related to the
BD encryption scheme, DRM, etc. :\
I *do* have a git tree containing the driver, lib, gst plugin and
firmware that I'm working from at the moment[*], as there are inter-
dependencies between the driver and lib, and the driver can be used
with kernels going a ways back (I've only tested back to 2.6.18 as
it exists in Red Hat Enterprise Linux 5). I'm exporting from there,
into a linux-next tree, then generating patches from there. The goal
is to feed everything upstream as quickly as possible, but there are
users who want this code for earlier kernels too...
The firmware will be submitted for inclusion in dwmw2's linux-firmware
tree once there is a suitable redistribution-no-modification type of
license on it (I believe Naren is working with Broadcom legal to get
that in place).
Changelog from initial Broadcom release to here:
commit
d20475d444610c5683d09e63f707f5bb22359062
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 13:55:16 2010 -0500
include: lib doesn't build w/o the removed stdint include
So add it back...
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit
c181070a330530b792d2b80e3ec6ab12a5a57394
Author: Scott Davilla <davilla@4pi.com>
Date: Mon Jan 4 13:38:37 2010 -0500
include: don't define VOID if its already defined
Signed-off-by: Scott Davilla <davilla@4pi.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit
33d8a2b691e81212e398f53770578d79650bf0bc
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 13:12:10 2010 -0500
driver: create crystalhd device using udev
Based on:
http://sourceforge.net/apps/trac/archvdr/browser/trunk/archvdr/crystalhd/use_udev.patch
Signed-off-by: Edgar ( gimli ) Hucek <ebsi4711 at gmail dot com>
Formatting tweaks, error-handling path fixups and any bugs added by Jarod.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit
c44c64dea5537814796fcbe2d9db0209383c78b9
Author: Manu Abraham <abraham.manu@gmail.com>
Date: Mon Jan 4 10:32:47 2010 -0500
crystalhd: coding style cleanups
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit
cffa6da7467ff697a656d1dfff54bb0513a053dc
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 10:17:27 2010 -0500
crystalhd: run dos2unix over everything, this is linux source...
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit
7fa38a282db7af5a5746055f7c6cef8a9b8ee138
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 10:02:33 2010 -0500
crystalhd: initial import of released Broadcom code
Straight import of:
http://www.broadcom.com/docs/support/crystalhd/crystalhd_linux_20091229.zip
Unfortunately, we're unable to publicly publish all the history that got
us from the initial internal code to what was released here, but such is
life, we can just be happy we've got this open-sourced now. :)
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Naren Sankar <nsankar@broadcom.com>
Signed-off-by: Scott Davilla <davilla@4pi.com>
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 23 Dec 2009 00:38:10 +0000 (16:38 -0800)]
Staging: altpciechdma: remove driver
No one seems to be able to maintain this, or merge it into mainline, so
remove it.
Acked-by: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 23 Dec 2009 00:35:21 +0000 (16:35 -0800)]
Staging: p9auth: remove driver from tree
No one seems to be maintaining this anymore, and it is not on any
track to be merged to mainline.
Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 23 Dec 2009 00:29:26 +0000 (16:29 -0800)]
staging: remove the b3dfg driver
It has no users, and no developers to maintain it to get
it merged into mainline.
So sad.
Cc: Daniel Drake <ddrake@brontes3d.com>
Cc: Justin Bronder <jsbronder@brontes3d.com>
Cc: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 22 Dec 2009 23:19:21 +0000 (15:19 -0800)]
Staging: dt3155: coding style cleanups for the .h files
This cleans up some of the coding style issues in the .h files.
More remains to be done.
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 22 Dec 2009 23:18:28 +0000 (15:18 -0800)]
Staging: dt3155: coding style cleanups for allocator code
This fixes up the worst of the coding style errors for the
allocator code.
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Horman [Mon, 21 Dec 2009 04:09:53 +0000 (15:09 +1100)]
Staging: wlan-ng: initialise mibitem
$ gcc --version
gcc (Debian 4.4.2-5) 4.4.2
Copyright (C) 2009 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ make
...
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_dorequest’:
drivers/staging/wlan-ng/p80211wext.c:139: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:139: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwretry’:
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwretry’:
drivers/staging/wlan-ng/p80211wext.c:1057: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1057: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwtxpow’:
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwtxpow’:
drivers/staging/wlan-ng/p80211wext.c:1123: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1123: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwfrag’:
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwfrag’:
drivers/staging/wlan-ng/p80211wext.c:933: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:933: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwrts’:
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwrts’:
drivers/staging/wlan-ng/p80211wext.c:866: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:866: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwrate’:
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwfreq’:
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwfreq’:
drivers/staging/wlan-ng/p80211wext.c:320: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwmode’:
drivers/staging/wlan-ng/p80211wext.c:401: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:401: warning: ‘mibitem.status’ may be used uninitialized in this function
...
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Horman [Mon, 21 Dec 2009 04:08:15 +0000 (15:08 +1100)]
Staging: prism2-usb: Build should select WIRELESS_EXT
The prevailing idiom is to select WIRELESS_EXT not depend on it.
Depending leaves this driver in a situation where it can only
be built if another driver that selects WIRELESS_EXT has been enabled.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Horman [Mon, 21 Dec 2009 04:07:50 +0000 (15:07 +1100)]
Staging: rtl8192su: Use z format qualifier for output of sizeof()
$ gcc --version
gcc (Debian 4.4.2-5) 4.4.2
Copyright (C) 2009 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ make
...
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_ADDBAReq’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:342: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_ADDBARsp’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:443: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_DELBA’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:573: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
...
Also some style fixes for these lines:
+ Fix excessively long lines
+ Remove leading space before struct
+ Remove unnecessary parentheses
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Horman [Mon, 21 Dec 2009 04:07:10 +0000 (15:07 +1100)]
Staging: rtl8192su: Build should select WIRELESS_EXT
The prevailing idiom is to select WIRELESS_EXT not depend on it.
Depending leaves this driver in a situation where it can only
be built if another driver that selects WIRELESS_EXT has been enabled.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Justin Madru [Fri, 18 Dec 2009 23:52:53 +0000 (15:52 -0800)]
Staging: s5k3e2fx.c: simplify complexity by factoring
the code was looping, setting s_move[i] to the following calculations
if (actual_step>= 0)
s_move[i] = ((((i + 1) * gain + 0x200) - (i * gain + 0x200)) / 0x400);
else
s_move[i] = ((((i + 1) * gain - 0x200) - (i * gain - 0x200)) / 0x400);
but, this code reduces to the expression
s_move[i] = gain>> 10;
The reason for the complexity was to generate a step function with
integer division and rounding to land on specific values. But these calculations
can be simplified to the following code:
gain = ((actual_step<< 10) / 5)>> 10;
for (i = 0; i<= 4; i++)
s_move[i] = gain;
Signed-off-by: Justin Madru<jdm64@gawab.com>
Reviewed-by: Ray Lee<ray-lk@madrabbit.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Fri, 18 Dec 2009 21:08:22 +0000 (23:08 +0200)]
Staging: w35und: Remove unused typedefs MLME_DEAUTHREQ_PARA and MLME_DISASSOCREQ_PARA
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Fri, 18 Dec 2009 21:08:21 +0000 (23:08 +0200)]
Staging: w35und: Remove unused typedef RXLAYER1
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Fri, 18 Dec 2009 21:08:20 +0000 (23:08 +0200)]
Staging: w35und: Remove unused typedef TXRETRY_REC
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Fri, 18 Dec 2009 21:08:19 +0000 (23:08 +0200)]
Staging: w35und: Remove unused typedef CHAN_LIST
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Fri, 18 Dec 2009 21:08:18 +0000 (23:08 +0200)]
Staging: w35und: Convert typedef ChanInfo to struct chan_info
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Fri, 18 Dec 2009 21:08:17 +0000 (23:08 +0200)]
Staging: w35und: Remove unused typedef _EVENTLOG
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Fri, 18 Dec 2009 21:08:16 +0000 (23:08 +0200)]
Staging: w35und: Convert typedef RadioOff to struct radio_off
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Fri, 18 Dec 2009 21:08:15 +0000 (23:08 +0200)]
Staging: w35und: Convert typedef LOCAL_PARA to struct wb_local_para
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adam Buchbinder [Fri, 18 Dec 2009 20:43:52 +0000 (15:43 -0500)]
staging: Fix misspelling of "invocation" in comment.
A comment misspells "invocation"; this fixes it. No code changes.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adam Buchbinder [Fri, 18 Dec 2009 20:43:51 +0000 (15:43 -0500)]
staging: Fix misspelling of "should" and "shouldn't" in comments.
Some comments misspell "should" or "shouldn't"; this fixes them. No code changes.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adam Buchbinder [Fri, 18 Dec 2009 20:43:50 +0000 (15:43 -0500)]
staging: Fix misspelling of "successful" and variants.
Some comments and one message misspell "successful" or variants of
the word; this fixes them. No change in functionality.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bernie Thompson [Tue, 24 Nov 2009 23:52:21 +0000 (15:52 -0800)]
Staging: udlfb: add dynamic modeset support
Add dynamic modeset support
udlfb uses EDID to find the monitor’s preferred mode
udlfb no longer has fixed mode tables – it’s able to set any mode
dynamically, from the standard VESA timing characteristics of the monitor.
Draws from probe and setmode code of both displaylink-mod 0.3 branch of
Roberto De Ioris, and Jaya Kumar's displaylinkfb.
Lays foundation for defio support and making backbuffer optional.
With additional changes to minimize diffs and clean for checkpatch.pl style.
Does not yet include new ioctls or refcount/mutex code from displaylink-mod.
Tested to work with existing xf-video-displaylink X server unmodified.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 18 Dec 2009 19:04:54 +0000 (11:04 -0800)]
Staging: dt3155: add it to the build
Now it will build with the rest of the kernel
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 18 Dec 2009 19:06:11 +0000 (11:06 -0800)]
Staging: dt3155: add TODO file
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 18 Dec 2009 19:05:25 +0000 (11:05 -0800)]
Staging: dt3155: add needed #include
This is needed so the code properly builds
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Scott Smedley [Fri, 18 Dec 2009 18:54:26 +0000 (10:54 -0800)]
Staging: add dt3155 driver
This is a driver for the DT3155 Digitizer
Signed-off-by: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Radu Voicilas [Tue, 8 Dec 2009 02:20:09 +0000 (18:20 -0800)]
Staging: rtl8192e: Small code fixes for r819xE_firmware.c
Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Radu Voicilas [Tue, 8 Dec 2009 02:20:08 +0000 (18:20 -0800)]
Staging: rtl8192e: Code style fixes for r819xE_phy.h
Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Radu Voicilas [Tue, 8 Dec 2009 02:20:07 +0000 (18:20 -0800)]
Staging: rtl8192e: Code style fix for r819xE_phyreg.h
Changed all the comments to conform to the standard, aligned register values.
Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Radu Voicilas [Sat, 5 Dec 2009 04:43:16 +0000 (20:43 -0800)]
Staging: rtl8192e: fix more coding style issues.
Fixes to the way code looks.
Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
david woo [Tue, 22 Dec 2009 17:40:36 +0000 (09:40 -0800)]
Staging: rtl9192e: fix power usage issues
This patch should allow the driver to consume a lot less power.
Signed-off-by: david woo <xinhua_wu@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Radu Voicilas [Sat, 5 Dec 2009 04:42:53 +0000 (20:42 -0800)]
Staging: rtl8192e: fix some codingstyle issues
dot11d.h needed a good refactoring - I've dropped some of the //
comments or transformed them to match the kernel documentation.
r8180_93cx6.h - fixed a little bit the copyright section.
Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Huang Weiyi [Sun, 13 Dec 2009 14:06:25 +0000 (22:06 +0800)]
Staging: ramzswap: remove unused #include <linux/version.h>
Remove unused #include <linux/version.h>('s) in
drivers/staging/ramzswap/ramzswap_drv.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Huang Weiyi [Sun, 13 Dec 2009 13:14:10 +0000 (21:14 +0800)]
Staging: wlags49_h2: remove duplicated #include
Remove duplicated #include('s) in
drivers/staging/wlags49_h2/wl_pci.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ameya Palande [Mon, 14 Dec 2009 11:57:59 +0000 (13:57 +0200)]
Staging: iio: checkinclude.pl fix
Remove <linux/device.h> which is included twice
Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Lunn [Sat, 12 Dec 2009 22:39:46 +0000 (23:39 +0100)]
Staging: batman-adv: Fix the naming of the debug option.
So that the configuration hierarchy is correct, set the debug option
to have the same base as the main BATMAN option.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Lunn [Sat, 12 Dec 2009 22:39:45 +0000 (23:39 +0100)]
Staging: batman-adv: Split originator handling parts out of routing.c
Bug found and fixed in origional version by Linus Luessing.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Lunn [Sat, 12 Dec 2009 22:39:44 +0000 (23:39 +0100)]
Staging: batman-adv: Always receive when discarding.
It does not matter if the interface is to be activated or not, we must
read the packet in order that it be discarded.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Lunn [Sat, 12 Dec 2009 22:39:43 +0000 (23:39 +0100)]
Staging: batman-adv: stop persistent warnings if a device is deactivated.
Without this change we spam the kernel log on every packet received on
any other interface when an interface has been added, but is not yet
active, ie UP.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Lunn [Sat, 12 Dec 2009 22:39:42 +0000 (23:39 +0100)]
Staging: batman-adv: Refactor routing.c
Break up a lot of the big functions up into many smaller ones. This
helps with readability and there is now a lot less code squashed
against the right hand margin.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <simon.wunderlich@s2003.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Lunn [Sat, 12 Dec 2009 22:39:41 +0000 (23:39 +0100)]
Staging: batman-adv: replace internal logging mechanism.
batman-adv used its own logging infrastructure. Replace this with
standard kernel logging, printk(), with compile time and runtime
options to enable/disable different debug levels.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Peter Huewe [Tue, 15 Dec 2009 04:04:22 +0000 (05:04 +0100)]
Staging: asus_oled: Add defines for asus vendor_id and device_id to be consistent with hid-ids.h
This almost trivial patch replaces the hardcoded values for the vendor and
device ids with defines, as they are used in drivers/hid/hid-ids.h
For me this seems to be more consistent, however as drivers/hid/hid-ids.h
is not within the default include directory I had to redefine the defines here
(maybe move the hid-ids.h to include/linux ?)
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ameya Palande [Fri, 11 Dec 2009 17:10:12 +0000 (19:10 +0200)]
Staging: mimio: checkpatch.pl line > 80 chars fixes
Rearrange code and cleanup the information to get rid of checkpatch.pl
line > 80 chars complaints.
Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ameya Palande [Fri, 11 Dec 2009 17:10:11 +0000 (19:10 +0200)]
Staging: mimio: Remove dead code
Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ameya Palande [Fri, 11 Dec 2009 17:10:10 +0000 (19:10 +0200)]
Staging: mimio: Fix checkpatch.pl spacing errors
Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Joe Perches [Sun, 6 Dec 2009 19:34:52 +0000 (11:34 -0800)]
Staging: rtl8187x: Use %pM for mac address output
Uncompiled. Doesn't currently build anyway.
Converted MAC_FMT to %pM
Converted some %02x%02x%02x%02x%02x%02x to %pm
Converted MAC_ARG to direct use
Removed MAC_FMT and MAC_ARG macros
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kirjanov@gmail.com [Fri, 18 Dec 2009 08:02:09 +0000 (11:02 +0300)]
staging: slicoss Use pci_set_consistent_dma_mask.
Use pci_set_consistent_dma_mask() in the case of 64-bit consistent allocations.
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kirjanov@gmail.com [Fri, 18 Dec 2009 08:00:19 +0000 (11:00 +0300)]
staging: slicoss Use compare_ether_addr.
Use compare_ether_addr.
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kirjanov@gmail.com [Fri, 18 Dec 2009 07:59:04 +0000 (10:59 +0300)]
staging: slicoss Use PCI_DEVICE_TABLE.
Use PCI_DEVICE_TABLE: defines array as const and puts
it into the __devinitconst section.
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kirjanov@gmail.com [Fri, 18 Dec 2009 07:57:45 +0000 (10:57 +0300)]
staging: slicoss Use dev->stats rather than adapter->stats.
Use dev->stats rather than adapter->stats.
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kirjanov@gmail.com [Fri, 18 Dec 2009 07:56:21 +0000 (10:56 +0300)]
staging: slicoss No need to check pointer in debugfs_remove()
No need to check pointer expicitly since it has been done in debugfs_remove()
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kirjanov@gmail.com [Fri, 18 Dec 2009 07:54:27 +0000 (10:54 +0300)]
staging: slicoss No need type casting when using netdev_priv
No need type casting when using netdev_priv.
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kirjanov@gmail.com [Fri, 18 Dec 2009 07:52:45 +0000 (10:52 +0300)]
staging: slicoss Check for valid hw address
Check for valid hw address.
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kirjanov@gmail.com [Fri, 18 Dec 2009 07:51:07 +0000 (10:51 +0300)]
staging: slicoss Convert to netdev_tx_t
Convert to netdev_tx_t.
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Martyn Welch [Tue, 15 Dec 2009 08:43:15 +0000 (08:43 +0000)]
Staging: vme: Allow drivers to co-exist
Unable to build both drivers at the same time due to classing variables that should be declared static but aren't.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Martyn Welch [Tue, 15 Dec 2009 08:43:09 +0000 (08:43 +0000)]
Staging: vme: Remove old structures for implemented features
Functionality for master RMW and location monitors has been implemented.
Remove the commented out structures from the original codebase.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Martyn Welch [Tue, 15 Dec 2009 08:43:02 +0000 (08:43 +0000)]
Staging: vme: Fix checkpatch errors on VME core.
Running checkpatch on the core VME code highlights many errors. Fix them.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Martyn Welch [Tue, 15 Dec 2009 08:42:56 +0000 (08:42 +0000)]
Staging: vme: Allow override of geographical address on
ca91c142
Geographical addressing only works if the VME backplane supports it. There
are a large number of old backplanes which do not support geographical
addressing. These boards will generally report a slot ID of zero - which is
an invalid ID in the slot numbering scheme.
Allow the geographical address to be over-ridden on the
ca91c142 so that a
slot ID can be provided manually in these circumstances.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Martyn Welch [Tue, 15 Dec 2009 08:42:49 +0000 (08:42 +0000)]
Staging: vme: Allow override of geographical address on tsi148
Geographical addressing only works if the VME backplane supports it. There
are a large number of old backplanes which do not support geographical
addressing. These boards will generally report a slot ID of zero - which is
an invalid ID in the slot numbering scheme.
Allow the geographical address to be over-ridden on the tsi148 so that a
slot ID can be provided manually in these circumstances.
Signed-off-by: Markus Kraemer <mkraemer@e18.physik.tu-muenchen.de>
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Martyn Welch [Tue, 15 Dec 2009 08:42:43 +0000 (08:42 +0000)]
Staging: vme: Correct vme_user error message typo
Correction of erroneous error message in vme_user.c.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roel Kluin [Thu, 10 Dec 2009 15:39:44 +0000 (16:39 +0100)]
Staging: otus: Fix branch in zfProtRspSim()
This semicolon is misplaced.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Thiago Farina [Sun, 22 Nov 2009 22:00:00 +0000 (17:00 -0500)]
Staging: otus: fix some sparse warnings
*apdbg.c: use NULL pointer instead of 0 interger. Also make two functions private.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Huang Weiyi [Sun, 13 Dec 2009 13:13:54 +0000 (21:13 +0800)]
Staging: dream: remove duplicated #include
Remove duplicated #include('s) in
drivers/staging/dream/smd/smd_rpcrouter.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavel Machek [Sat, 21 Nov 2009 08:16:47 +0000 (09:16 +0100)]
Staging: dream: fix memory leak in camera error path
cppcheck found that ctrl_pmsm is leaked if the open operation fails.
Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavel Machek [Sat, 21 Nov 2009 08:16:12 +0000 (09:16 +0100)]
Staging: dream: add missing include files
Add missing files/includes neccessary for Dream compilation. Mark
flash support as broken -- it is not present on released Dream, anyway.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bruce Beare [Fri, 20 Nov 2009 23:46:11 +0000 (15:46 -0800)]
Staging: comedi: pcmad: [PATCH 3/3] cleanup printk() warnings
cleanup printk() warnings for including the facility level.
cleanup add a printk("\n") to terminate the print for the non-error case.
Signed-off-by: Bruce Beare <bbeare1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bruce Beare [Fri, 20 Nov 2009 23:46:10 +0000 (15:46 -0800)]
Staging: comedi: pcmad: Cleanup: Remove unneeded braces
Signed-off-by: Bruce Beare <bbeare1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bruce Beare [Fri, 20 Nov 2009 23:46:09 +0000 (15:46 -0800)]
Staging: comedi: pcmad: Cleanup: code indent warning messages
use tabs instead of leading spaces
Signed-off-by: Bruce Beare <bbeare1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Wed, 24 Feb 2010 18:52:17 +0000 (10:52 -0800)]
Linux 2.6.33
Linus Torvalds [Wed, 24 Feb 2010 18:51:21 +0000 (10:51 -0800)]
Merge branch 'urgent' of git://git./linux/kernel/git/kyle/parisc-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
parisc: Set PCI CLS early in boot.
Linus Torvalds [Wed, 24 Feb 2010 18:51:04 +0000 (10:51 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Fix broken sn2 build
Carlos O'Donell [Mon, 22 Feb 2010 23:25:59 +0000 (23:25 +0000)]
parisc: Set PCI CLS early in boot.
Set the PCI CLS early in the boot process to prevent
device failures. In pcibios_set_master use the new
pci_cache_line_size instead of a hard-coded value.
Signed-off-by: Carlos O'Donell <carlos@codesourcery.com>
Reviewed-by: Grant Grundler <grundler@google.com>
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Linus Torvalds [Wed, 24 Feb 2010 15:43:02 +0000 (07:43 -0800)]
Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix out_le32() macro
microblaze: Fix cache loop function for cache range
Linus Torvalds [Wed, 24 Feb 2010 15:42:42 +0000 (07:42 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
Revert "block: improve queue_should_plug() by looking at IO depths"