OSDN Git Service
Colin Ian King [Wed, 29 Nov 2017 14:11:49 +0000 (14:11 +0000)]
net: via: via-rhine: use %p to format void * address instead of %x
Don't use %x and casting to print out an address, instead use %p
and remove the casting. Cleans up smatch warnings:
drivers/net/ethernet/via/via-rhine.c:998 rhine_init_one_common()
warn: argument 4 to %lx specifier is cast from pointer
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Wed, 29 Nov 2017 10:01:09 +0000 (11:01 +0100)]
net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit
On 64-bit (e.g. powerpc64/allmodconfig):
drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done':
drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
^
cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer.
Note that several other fields in struct cdmac_bd are also too small to
hold physical addresses on 64-bit platforms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hyong-Youb Kim [Wed, 29 Nov 2017 05:03:50 +0000 (00:03 -0500)]
myri10ge: Update MAINTAINERS
Change the maintainer to Chris Lee who has access to Myricom hardware
and can test/review. Update the website URL.
Signed-off-by: Hyong-Youb Kim <hykim@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Mon, 27 Nov 2017 17:37:21 +0000 (18:37 +0100)]
net: sched: cbq: create block for q->link.block
q->link.block is not initialized, that leads to EINVAL when one tries to
add filter there. So initialize it properly.
This can be reproduced by:
$ tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 rate 1000Mbit bandwidth 1000Mbit
$ tc filter add dev eth0 parent 1: protocol ip prio 100 u32 match ip protocol 0 0x00 flowid 1:1
Reported-by: Jaroslav Aster <jaster@redhat.com>
Reported-by: Ivan Vecera <ivecera@redhat.com>
Fixes:
6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 27 Nov 2017 13:47:22 +0000 (13:47 +0000)]
atm: suni: remove extraneous space to fix indentation
Remove a leading space, fixes indentation
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 27 Nov 2017 13:39:32 +0000 (13:39 +0000)]
atm: lanai: use %p to format kernel addresses instead of %x
Don't use %x and casting to print out a kernel address, instead use %p
and remove the casting. Cleans up smatch warnings:
drivers/atm/lanai.c:1589 service_buffer_allocate() warn: argument 2 to
%08lX specifier is cast from pointer
drivers/atm/lanai.c:2221 lanai_dev_open() warn: argument 4 to %lx
specifier is cast from pointer
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jorgen Hansen [Mon, 27 Nov 2017 13:29:32 +0000 (05:29 -0800)]
VSOCK: Don't set sk_state to TCP_CLOSE before testing it
A recent commit (
3b4477d2dcf2) converted the sk_state to use
TCP constants. In that change, vmci_transport_handle_detach
was changed such that sk->sk_state was set to TCP_CLOSE before
we test whether it is TCP_SYN_SENT. This change moves the
sk_state change back to the original locations in that function.
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 27 Nov 2017 13:24:15 +0000 (13:24 +0000)]
atm: fore200e: use %pK to format kernel addresses instead of %x
Don't use %x and casting to print out a kernel address, instead use the
%pK and remove the casting. Cleans up smatch warning:
drivers/atm/fore200e.c:3093 fore200e_proc_read() warn: argument 3 to %08x
specifier is cast from pointer
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 27 Nov 2017 13:06:10 +0000 (13:06 +0000)]
ambassador: fix incorrect indentation of assignment statement
Remove one extraneous level of indentation on assignment statement.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 26 Nov 2017 13:19:05 +0000 (21:19 +0800)]
vxlan: use __be32 type for the param vni in __vxlan_fdb_delete
All callers of __vxlan_fdb_delete pass vni with __be32 type, and
this param should be declared as __be32 type.
Fixes:
3ad7a4b141eb ("vxlan: support fdb and learning in COLLECT_METADATA mode")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 26 Nov 2017 13:12:09 +0000 (21:12 +0800)]
bonding: use nla_get_u64 to extract the value for IFLA_BOND_AD_ACTOR_SYSTEM
bond_opt_initval expects a u64 type param, it's better to use
nla_get_u64 to extract the value here, to eliminate a sparse
endianness mismatch warning.
Fixes:
171a42c38c6e ("bonding: add netlink support for sys prio, actor sys mac, and port key")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 26 Nov 2017 12:56:07 +0000 (20:56 +0800)]
sctp: use right member as the param of list_for_each_entry
Commit
d04adf1b3551 ("sctp: reset owner sk for data chunks on out queues
when migrating a sock") made a mistake that using 'list' as the param of
list_for_each_entry to traverse the retransmit, sacked and abandoned
queues, while chunks are using 'transmitted_list' to link into these
queues.
It could cause NULL dereference panic if there are chunks in any of these
queues when peeling off one asoc.
So use the chunk member 'transmitted_list' instead in this patch.
Fixes:
d04adf1b3551 ("sctp: reset owner sk for data chunks on out queues when migrating a sock")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Tue, 28 Nov 2017 13:28:39 +0000 (14:28 +0100)]
sch_sfq: fix null pointer dereference at timer expiration
While converting sch_sfq to use timer_setup(), the commit
cdeabbb88134
("net: sched: Convert timers to use timer_setup()") forgot to
initialize the 'sch' field. As a result, the timer callback tries to
dereference a NULL pointer, and the kernel does oops.
Fix it initializing such field at qdisc creation time.
Fixes:
cdeabbb88134 ("net: sched: Convert timers to use timer_setup()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 27 Nov 2017 19:11:41 +0000 (11:11 -0800)]
cls_bpf: don't decrement net's refcount when offload fails
When cls_bpf offload was added it seemed like a good idea to
call cls_bpf_delete_prog() instead of extending the error
handling path, since the software state is fully initialized
at that point. This handling of errors without jumping to
the end of the function is error prone, as proven by later
commit missing that extra call to __cls_bpf_delete_prog().
__cls_bpf_delete_prog() is now expected to be invoked with
a reference on exts->net or the field zeroed out. The call
on the offload's error patch does not fullfil this requirement,
leading to each error stealing a reference on net namespace.
Create a function undoing what cls_bpf_set_parms() did and
use it from __cls_bpf_delete_prog() and the error path.
Fixes:
aae2c35ec892 ("cls_bpf: use tcf_exts_get_net() before call_rcu()")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 28 Nov 2017 16:03:30 +0000 (08:03 -0800)]
net/packet: fix a race in packet_bind() and packet_notifier()
syzbot reported crashes [1] and provided a C repro easing bug hunting.
When/if packet_do_bind() calls __unregister_prot_hook() and releases
po->bind_lock, another thread can run packet_notifier() and process an
NETDEV_UP event.
This calls register_prot_hook() and hooks again the socket right before
first thread is able to grab again po->bind_lock.
Fixes this issue by temporarily setting po->num to 0, as suggested by
David Miller.
[1]
dev_remove_pack:
ffff8801bf16fa80 not found
------------[ cut here ]------------
kernel BUG at net/core/dev.c:7945! ( BUG_ON(!list_empty(&dev->ptype_all)); )
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
device syz0 entered promiscuous mode
CPU: 0 PID: 3161 Comm: syzkaller404108 Not tainted 4.14.0+ #190
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task:
ffff8801cc57a500 task.stack:
ffff8801cc588000
RIP: 0010:netdev_run_todo+0x772/0xae0 net/core/dev.c:7945
RSP: 0018:
ffff8801cc58f598 EFLAGS:
00010293
RAX:
ffff8801cc57a500 RBX:
dffffc0000000000 RCX:
ffffffff841f75b2
RDX:
0000000000000000 RSI:
1ffff100398b1ede RDI:
ffff8801bf1f8810
device syz0 entered promiscuous mode
RBP:
ffff8801cc58f898 R08:
0000000000000001 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8801bf1f8cd8
R13:
ffff8801cc58f870 R14:
ffff8801bf1f8780 R15:
ffff8801cc58f7f0
FS:
0000000001716880(0000) GS:
ffff8801db400000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020b13000 CR3:
0000000005e25000 CR4:
00000000001406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:106
tun_detach drivers/net/tun.c:670 [inline]
tun_chr_close+0x49/0x60 drivers/net/tun.c:2845
__fput+0x333/0x7f0 fs/file_table.c:210
____fput+0x15/0x20 fs/file_table.c:244
task_work_run+0x199/0x270 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x9bb/0x1ae0 kernel/exit.c:865
do_group_exit+0x149/0x400 kernel/exit.c:968
SYSC_exit_group kernel/exit.c:979 [inline]
SyS_exit_group+0x1d/0x20 kernel/exit.c:977
entry_SYSCALL_64_fastpath+0x1f/0x96
RIP: 0033:0x44ad19
Fixes:
30f7ea1c2b5f ("packet: race condition in packet_bind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Francesco Ruggeri <fruggeri@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Maloney [Tue, 28 Nov 2017 15:44:29 +0000 (10:44 -0500)]
packet: fix crash in fanout_demux_rollover()
syzkaller found a race condition fanout_demux_rollover() while removing
a packet socket from a fanout group.
po->rollover is read and operated on during packet_rcv_fanout(), via
fanout_demux_rollover(), but the pointer is currently cleared before the
synchronization in packet_release(). It is safer to delay the cleanup
until after synchronize_net() has been called, ensuring all calls to
packet_rcv_fanout() for this socket have finished.
To further simplify synchronization around the rollover structure, set
po->rollover in fanout_add() only if there are no errors. This removes
the need for rcu in the struct and in the call to
packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...).
Crashing stack trace:
fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392
packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487
dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953
xmit_one net/core/dev.c:2975 [inline]
dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995
__dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476
dev_queue_xmit+0x17/0x20 net/core/dev.c:3509
neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379
neigh_output include/net/neighbour.h:482 [inline]
ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120
ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146
NF_HOOK_COND include/linux/netfilter.h:239 [inline]
ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163
dst_output include/net/dst.h:459 [inline]
NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250
mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660
mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072
mld_send_initial_cr net/ipv6/mcast.c:2056 [inline]
ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079
addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039
addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971
process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113
worker_thread+0x223/0x1990 kernel/workqueue.c:2247
kthread+0x35e/0x430 kernel/kthread.c:231
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432
Fixes:
0648ab70afe6 ("packet: rollover prepare: per-socket state")
Fixes:
509c7a1ecc860 ("packet: avoid panic in packet_getsockopt()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Mike Maloney <maloney@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 28 Nov 2017 16:00:14 +0000 (11:00 -0500)]
Merge branch 'sctp-fix-sparse-errors'
Xin Long says:
====================
sctp: fix some other sparse errors
After the last fixes for sparse errors, there are still three sparse
errors in sctp codes, two of them are type cast, and the other one
is using extern.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 26 Nov 2017 12:16:08 +0000 (20:16 +0800)]
sctp: remove extern from stream sched
Now each stream sched ops is defined in different .c file and
added into the global ops in another .c file, it uses extern
to make this work.
However extern is not good coding style to get them in and
even make C=2 reports errors for this.
This patch adds sctp_sched_ops_xxx_init for each stream sched
ops in their .c file, then get them into the global ops by
calling them when initializing sctp module.
Fixes:
637784ade221 ("sctp: introduce priority based stream scheduler")
Fixes:
ac1ed8b82cd6 ("sctp: introduce round robin stream scheduler")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 26 Nov 2017 12:16:07 +0000 (20:16 +0800)]
sctp: force the params with right types for sctp csum apis
Now sctp_csum_xxx doesn't really match the param types of these common
csum apis. As sctp_csum_xxx is defined in sctp/checksum.h, many sparse
errors occur when make C=2 not only with M=net/sctp but also with other
modules that include this header file.
This patch is to force them fit in csum apis with the right types.
Fixes:
e6d8b64b34aa ("net: sctp: fix and consolidate SCTP checksumming code")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 26 Nov 2017 12:16:06 +0000 (20:16 +0800)]
sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_fail
This patch is to force SCTP_ERROR_INV_STRM with right type to
fit in sctp_chunk_fail to avoid the sparse error.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasyl Gomonovych [Wed, 22 Nov 2017 15:29:57 +0000 (16:29 +0100)]
lmc: Use memdup_user() as a cleanup
Fix coccicheck warning which recommends to use memdup_user():
drivers/net/wan/lmc/lmc_main.c:497:27-34: WARNING opportunity for memdup_user
Generated by: scripts/coccinelle/memdup_user/memdup_user.cocci
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Tue, 21 Nov 2017 19:46:49 +0000 (20:46 +0100)]
bnxt_en: Fix an error handling path in 'bnxt_get_module_eeprom()'
Error code returned by 'bnxt_read_sfp_module_eeprom_info()' is handled a
few lines above when reading the A0 portion of the EEPROM.
The same should be done when reading the A2 portion of the EEPROM.
In order to correctly propagate an error, update 'rc' in this 2nd call as
well, otherwise 0 (success) is returned.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Tue, 28 Nov 2017 13:26:30 +0000 (14:26 +0100)]
net: phy: marvell10g: fix the PHY id mask
The Marvell 10G PHY driver supports different hardware revisions, which
have their bits 3..0 differing. To get the correct revision number these
bits should be ignored. This patch fixes this by using the already
defined MARVELL_PHY_ID_MASK (0xfffffff0) instead of the custom
0xffffffff mask.
Fixes:
20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support")
Suggested-by: Yan Markman <ymarkman@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 28 Nov 2017 15:09:52 +0000 (10:09 -0500)]
Merge branch 'mvpp2-fixes'
Antoine Tenart says:
====================
net: mvpp2: set of fixes
This series fixes various issues with the Marvell PPv2 driver. The
patches are sent together to avoid any possible conflict. The series is
based on today's net tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Tue, 28 Nov 2017 13:19:51 +0000 (14:19 +0100)]
net: mvpp2: check ethtool sets the Tx ring size is to a valid min value
This patch fixes the Tx ring size checks when using ethtool, by adding
an extra check in the PPv2 check_ringparam_valid helper. The Tx ring
size cannot be set to a value smaller than the minimum number of
descriptors needed for TSO.
Fixes:
1d17db08c056 ("net: mvpp2: limit TSO segments and use stop/wake thresholds")
Suggested-by: Yan Markman <ymarkman@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yan Markman [Tue, 28 Nov 2017 13:19:50 +0000 (14:19 +0100)]
net: mvpp2: do not disable GMAC padding
Short fragmented packets may never be sent by the hardware when padding
is disabled. This patch stop modifying the GMAC padding bits, to leave
them to their reset value (disabled).
Fixes:
3919357fb0bb ("net: mvpp2: initialize the GMAC when using a port")
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Tue, 28 Nov 2017 13:19:49 +0000 (14:19 +0100)]
net: mvpp2: cleanup probed ports in the probe error path
This patches fixes the probe error path by cleaning up probed ports, to
avoid leaving registered net devices when the driver failed to probe.
Fixes:
3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Tue, 28 Nov 2017 13:19:48 +0000 (14:19 +0100)]
net: mvpp2: fix the txq_init error path
When an allocation in the txq_init path fails, the allocated buffers
end-up being freed twice: in the txq_init error path, and in txq_deinit.
This lead to issues as txq_deinit would work on already freed memory
regions:
kernel BUG at mm/slub.c:3915!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
This patch fixes this by removing the txq_init own error path, as the
txq_deinit function is always called on errors. This was introduced by
TSO as way more buffers are allocated.
Fixes:
186cd4d4e414 ("net: mvpp2: software tso support")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 28 Nov 2017 14:55:48 +0000 (09:55 -0500)]
Merge branch 'mlxsw-GRE-offloading-fixes'
Jiri Pirko says:
====================
mlxsw: GRE offloading fixes
Petr says:
This patchset fixes a couple bugs in offloading GRE tunnels in mlxsw
driver.
Patch #1 fixes a problem that local routes pointing at a GRE tunnel
device are offloaded even if that netdevice is down.
Patch #2 detects that as a result of moving a GRE netdevice to a
different VRF, two tunnels now have a conflict of local addresses,
something that the mlxsw driver can't offload.
Patch #3 fixes a FIB abort caused by forming a route pointing at a
GRE tunnel that is eligible for offloading but already onloaded.
Patch #4 fixes a problem that next hops migrated to a new RIF kept the
old RIF reference, which went dangling shortly afterwards.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Tue, 28 Nov 2017 12:17:14 +0000 (13:17 +0100)]
mlxsw: spectrum_router: Update nexthop RIF on update
The function mlxsw_sp_nexthop_rif_update() walks the list of nexthops
associated with a RIF, and updates the corresponding entries in the
switch. It is used in particular when a tunnel underlay netdevice moves
to a different VRF, and all the nexthops are migrated over to a new RIF.
The problem is that each nexthop holds a reference to its RIF, and that
is not updated. So after the old RIF is gone, further activity on these
nexthops (such as downing the underlay netdevice) dereferences a
dangling pointer.
Fix the issue by updating rif of impacted nexthops before calling
mlxsw_sp_nexthop_rif_update().
Fixes:
0c5f1cd5ba8c ("mlxsw: spectrum_router: Generalize __mlxsw_sp_ipip_entry_update_tunnel()")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Tue, 28 Nov 2017 12:17:13 +0000 (13:17 +0100)]
mlxsw: spectrum_router: Handle encap to demoted tunnels
Some tunnels that are offloadable on their own can nonetheless be
demoted to slow path if their local address is in conflict with that of
another tunnel. When a route is formed for such a tunnel,
mlxsw_sp_nexthop_ipip_init() fails to find the corresponding IPIP entry,
and that triggers a FIB abort.
Resolve the problem by not assuming that a tunnel for which
mlxsw_sp_ipip_ops.can_offload() holds also automatically has an IPIP
entry.
Fixes:
af641713e97d ("mlxsw: spectrum_router: Onload conflicting tunnels")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Tue, 28 Nov 2017 12:17:12 +0000 (13:17 +0100)]
mlxsw: spectrum_router: Demote tunnels on VRF migration
The mlxsw driver currently doesn't offload GRE tunnels if they have the
same local address and use the same underlay VRF. When such a situation
arises, the tunnels in conflict are demoted to slow path.
However, the current code only verifies this condition on tunnel
creation and tunnel change, not when a tunnel is moved to a different
VRF. When the tunnel has no bound device, underlay and overlay are the
same. Thus moving a tunnel moves the underlay as well, and that can
cause local address conflict.
So modify mlxsw_sp_netdevice_ipip_ol_vrf_event() to check if there are
any conflicting tunnels, and demote them if yes.
Fixes:
af641713e97d ("mlxsw: spectrum_router: Onload conflicting tunnels")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Tue, 28 Nov 2017 12:17:11 +0000 (13:17 +0100)]
mlxsw: spectrum_router: Offload decap only for up tunnels
When a new local route is added, an IPIP entry is looked up to determine
whether the route should be offloaded as a tunnel decap or as a trap.
That decision should take into account whether the tunnel netdevice in
question is actually IFF_UP, and only install a decap offload if it is.
Fixes:
0063587d3587 ("mlxsw: spectrum: Support decap-only IP-in-IP tunnels")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 28 Nov 2017 14:52:04 +0000 (09:52 -0500)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2017-11-27
This series contains updates to e1000, e1000e and i40e.
Gustavo A. R. Silva fixes a sizeof() issue where we were taking the size of
the pointer (which is always the size of the pointer).
Sasha does a follow up fix to a previous fix for buffer overrun, to resolve
community feedback from David Laight and the use of magic numbers.
Amritha fixes the reporting of error codes for when adding a cloud filter
fails.
Ahmad Fatoum brushes the dust off the e1000 driver to fix a code comment
and debug message which was incorrect about what the code was really doing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ahmad Fatoum [Sat, 18 Nov 2017 20:53:58 +0000 (21:53 +0100)]
e1000: Fix off-by-one in debug message
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Amritha Nambiar [Fri, 17 Nov 2017 23:35:57 +0000 (15:35 -0800)]
i40e: Fix reporting incorrect error codes
Adding cloud filters could fail for a number of reasons,
unsupported filter fields for example, which fails during
validation of fields itself. This will not result in admin
command errors and converting the admin queue status to posix
error code using i40e_aq_rc_to_posix would result in incorrect
error values. If the failure was due to AQ error itself,
reporting that correctly is handled in the inner function.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Sasha Neftin [Mon, 6 Nov 2017 06:31:59 +0000 (08:31 +0200)]
e1000e: fix the use of magic numbers for buffer overrun issue
This is a follow on to commit
b10effb92e27 ("fix buffer overrun while the
I219 is processing DMA transactions") to address David Laights concerns
about the use of "magic" numbers. So define masks as well as add
additional code comments to give a better understanding of what needs to
be done to avoid a buffer overrun.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Alexander H Duyck <alexander.h.duyck@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Reviewed-by: Raanan Avargil <raanan.avargil@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Gustavo A R Silva [Wed, 18 Oct 2017 20:34:25 +0000 (15:34 -0500)]
i40e/virtchnl: fix application of sizeof to pointer
sizeof when applied to a pointer typed expression gives the size of
the pointer.
The proper fix in this particular case is to code sizeof(*vfres)
instead of sizeof(vfres).
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A R Silva <garsilva@embeddedor.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jon Maloy [Mon, 27 Nov 2017 19:13:39 +0000 (20:13 +0100)]
tipc: eliminate access after delete in group_filter_msg()
KASAN revealed another access after delete in group.c. This time
it found that we read the header of a received message after the
buffer has been released.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eduardo Otubo [Thu, 23 Nov 2017 14:18:35 +0000 (15:18 +0100)]
xen-netfront: remove warning when unloading module
v2:
* Replace busy wait with wait_event()/wake_up_all()
* Cannot garantee that at the time xennet_remove is called, the
xen_netback state will not be XenbusStateClosed, so added a
condition for that
* There's a small chance for the xen_netback state is
XenbusStateUnknown by the time the xen_netfront switches to Closed,
so added a condition for that.
When unloading module xen_netfront from guest, dmesg would output
warning messages like below:
[ 105.236836] xen:grant_table: WARNING: g.e. 0x903 still in use!
[ 105.236839] deferring g.e. 0x903 (pfn 0x35805)
This problem relies on netfront and netback being out of sync. By the time
netfront revokes the g.e.'s netback didn't have enough time to free all of
them, hence displaying the warnings on dmesg.
The trick here is to make netfront to wait until netback frees all the g.e.'s
and only then continue to cleanup for the module removal, and this is done by
manipulating both device states.
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 27 Nov 2017 16:09:42 +0000 (01:09 +0900)]
Merge tag 'mac80211-for-davem-2017-11-27' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Four fixes:
* CRYPTO_SHA256 is needed for regdb validation
* mac80211: mesh path metric was wrong in some frames
* mac80211: use QoS null-data packets on QoS connections
* mac80211: tear down RX aggregation sessions first to
drop fewer packets in HW restart scenarios
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 27 Nov 2017 15:38:45 +0000 (00:38 +0900)]
Merge branch 'sctp-stream-reconfig-fixes'
Xin Long says:
====================
sctp: a bunch of fixes for stream reconfig
This patchset is to make stream reset and asoc reset work more correctly
for stream reconfig.
Thank to Marcelo making them very clear.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sat, 25 Nov 2017 13:05:36 +0000 (21:05 +0800)]
sctp: set sender next_tsn for the old result with ctsn_ack_point plus 1
When doing asoc reset, if the sender of the response has already sent some
chunk and increased asoc->next_tsn before the duplicate request comes, the
response will use the old result with an incorrect sender next_tsn.
Better than asoc->next_tsn, asoc->ctsn_ack_point can't be changed after
the sender of the response has performed the asoc reset and before the
peer has confirmed it, and it's value is still asoc->next_tsn original
value minus 1.
This patch sets sender next_tsn for the old result with ctsn_ack_point
plus 1 when processing the duplicate request, to make sure the sender
next_tsn value peer gets will be always right.
Fixes:
692787cef651 ("sctp: implement receiver-side procedures for the SSN/TSN Reset Request Parameter")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sat, 25 Nov 2017 13:05:35 +0000 (21:05 +0800)]
sctp: avoid flushing unsent queue when doing asoc reset
Now when doing asoc reset, it cleans up sacked and abandoned queues
by calling sctp_outq_free where it also cleans up unsent, retransmit
and transmitted queues.
It's safe for the sender of response, as these 3 queues are empty at
that time. But when the receiver of response is doing the reset, the
users may already enqueue some chunks into unsent during the time
waiting the response, and these chunks should not be flushed.
To void the chunks in it would be removed, it moves the queue into a
temp list, then gets it back after sctp_outq_free is done.
The patch also fixes some incorrect comments in
sctp_process_strreset_tsnreq.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sat, 25 Nov 2017 13:05:34 +0000 (21:05 +0800)]
sctp: only allow the asoc reset when the asoc outq is empty
As it says in rfc6525#section5.1.4, before sending the request,
C2: The sender has either no outstanding TSNs or considers all
outstanding TSNs abandoned.
Prior to this patch, it tried to consider all outstanding TSNs abandoned
by dropping all chunks in all outqs with sctp_outq_free (even including
sacked, retransmit and transmitted queues) when doing this reset, which
is too aggressive.
To make it work gently, this patch will only allow the asoc reset when
the sender has no outstanding TSNs by checking if unsent, transmitted
and retransmit are all empty with sctp_outq_is_empty before sending
and processing the request.
Fixes:
692787cef651 ("sctp: implement receiver-side procedures for the SSN/TSN Reset Request Parameter")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sat, 25 Nov 2017 13:05:33 +0000 (21:05 +0800)]
sctp: only allow the out stream reset when the stream outq is empty
Now the out stream reset in sctp stream reconf could be done even if
the stream outq is not empty. It means that users can not be sure
since which msg the new ssn will be used.
To make this more synchronous, it shouldn't allow to do out stream
reset until these chunks in unsent outq all are sent out.
This patch checks the corresponding stream outqs when sending and
processing the request . If any of them has unsent chunks in outq,
it will return -EAGAIN instead or send SCTP_STRRESET_IN_PROGRESS
back to the sender.
Fixes:
7f9d68ac944e ("sctp: implement sender-side procedures for SSN Reset Request Parameter")
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sat, 25 Nov 2017 13:05:32 +0000 (21:05 +0800)]
sctp: use sizeof(__u16) for each stream number length instead of magic number
Now in stream reconf part there are still some places using magic
number 2 for each stream number length. To make it more readable,
this patch is to replace them with sizeof(__u16).
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sara Sharon [Sun, 29 Oct 2017 09:51:09 +0000 (11:51 +0200)]
mac80211: tear down RX aggregations first
When doing HW restart we tear down aggregations.
Since at this point we are not TX'ing any aggregation, while
the peer is still sending RX aggregation over the air, it will
make sense to tear down the RX aggregations first.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Chun-Yeow Yeoh [Tue, 14 Nov 2017 15:20:05 +0000 (23:20 +0800)]
mac80211: fix the update of path metric for RANN frame
The previous path metric update from RANN frame has not considered
the own link metric toward the transmitting mesh STA. Fix this.
Reported-by: Michael65535
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Tue, 21 Nov 2017 13:46:08 +0000 (14:46 +0100)]
mac80211: use QoS NDP for AP probing
When connected to a QoS/WMM AP, mac80211 should use a QoS NDP
for probing it, instead of a regular non-QoS one, fix this.
Change all the drivers to *not* allow QoS NDP for now, even
though it looks like most of them should be OK with that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
zhangliping [Sat, 25 Nov 2017 14:02:12 +0000 (22:02 +0800)]
openvswitch: fix the incorrect flow action alloc size
If we want to add a datapath flow, which has more than 500 vxlan outputs'
action, we will get the following error reports:
openvswitch: netlink: Flow action size 32832 bytes exceeds max
openvswitch: netlink: Flow action size 32832 bytes exceeds max
openvswitch: netlink: Actions may not be safe on all matching packets
... ...
It seems that we can simply enlarge the MAX_ACTIONS_BUFSIZE to fix it, but
this is not the root cause. For example, for a vxlan output action, we need
about 60 bytes for the nlattr, but after it is converted to the flow
action, it only occupies 24 bytes. This means that we can still support
more than 1000 vxlan output actions for a single datapath flow under the
the current 32k max limitation.
So even if the nla_len(attr) is larger than MAX_ACTIONS_BUFSIZE, we
shouldn't report EINVAL and keep it move on, as the judgement can be
done by the reserve_sfa_size.
Signed-off-by: zhangliping <zhangliping02@baidu.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Sat, 25 Nov 2017 19:14:40 +0000 (13:14 -0600)]
net: openvswitch: datapath: fix data type in queue_gso_packets
gso_type is being used in binary AND operations together with SKB_GSO_UDP.
The issue is that variable gso_type is of type unsigned short and
SKB_GSO_UDP expands to more than 16 bits:
SKB_GSO_UDP = 1 << 16
this makes any binary AND operation between gso_type and SKB_GSO_UDP to
be always zero, hence making some code unreachable and likely causing
undesired behavior.
Fix this by changing the data type of variable gso_type to unsigned int.
Addresses-Coverity-ID:
1462223
Fixes:
0c19f846d582 ("net: accept UFO datagrams from tuntap and packet")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Fri, 24 Nov 2017 20:08:40 +0000 (12:08 -0800)]
uapi: add SPDX identifier to vm_sockets_diag.h
New file seems to have missed the SPDX license scan and update.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 24 Nov 2017 16:36:06 +0000 (11:36 -0500)]
net: dsa: fix 'increment on 0' warning
Setting the refcount to 0 when allocating a tree to match the number of
switch devices it holds may cause an 'increment on 0; use-after-free',
if CONFIG_REFCOUNT_FULL is enabled.
To fix this, do not decrement the refcount of a newly allocated tree,
increment it when an already allocated tree is found, and decrement it
after the probing of a switch, as done with the previous behavior.
At the same time, make dsa_tree_get and dsa_tree_put accept a NULL
argument to simplify callers, and return the tree after incrementation,
as most kref users like of_node_get and of_node_put do.
Fixes:
8e5bf9759a06 ("net: dsa: simplify tree reference counting")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jorgen Hansen [Fri, 24 Nov 2017 14:25:28 +0000 (06:25 -0800)]
VSOCK: Don't call vsock_stream_has_data in atomic context
When using the host personality, VMCI will grab a mutex for any
queue pair access. In the detach callback for the vmci vsock
transport, we call vsock_stream_has_data while holding a spinlock,
and vsock_stream_has_data will access a queue pair.
To avoid this, we can simply omit calling vsock_stream_has_data
for host side queue pairs, since the QPs are empty per default
when the guest has detached.
This bug affects users of VMware Workstation using kernel version
4.4 and later.
Testing: Ran vsock tests between guest and host, and verified that
with this change, the host isn't calling vsock_stream_has_data
during detach. Ran mixedTest between guest and host using both
guest and host as server.
v2: Rebased on top of recent change to sk_state values
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Kapl [Fri, 24 Nov 2017 11:27:58 +0000 (12:27 +0100)]
net: sched: crash on blocks with goto chain action
tcf_block_put_ext has assumed that all filters (and thus their goto
actions) are destroyed in RCU callback and thus can not race with our
list iteration. However, that is not true during netns cleanup (see
tcf_exts_get_net comment).
Prevent the user after free by holding all chains (except 0, that one is
already held). foreach_safe is not enough in this case.
To reproduce, run the following in a netns and then delete the ns:
ip link add dtest type dummy
tc qdisc add dev dtest ingress
tc filter add dev dtest chain 1 parent ffff: handle 1 prio 1 flower action goto chain 2
Fixes:
822e86d997 ("net_sched: remove tcf_block_put_deferred()")
Signed-off-by: Roman Kapl <code@rkapl.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mika Westerberg [Fri, 24 Nov 2017 11:05:36 +0000 (14:05 +0300)]
net: thunderbolt: Stop using zero to mean no valid DMA mapping
Commit
86dabda426ac ("net: thunderbolt: Clear finished Tx frame bus
address in tbnet_tx_callback()") fixed a DMA-API violation where the
driver called dma_unmap_page() in tbnet_free_buffers() for a bus address
that might already be unmapped. The fix was to zero out the bus address
of a frame in tbnet_tx_callback().
However, as pointed out by David Miller, zero might well be valid
mapping (at least in theory) so it is not good idea to use it here.
It turns out that we don't need the whole map/unmap dance for Tx buffers
at all. Instead we can map the buffers when they are initially allocated
and unmap them when the interface is brought down. In between we just
DMA sync the buffers for the CPU or device as needed.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Thu, 23 Nov 2017 19:34:31 +0000 (22:34 +0300)]
net: thunderx: Fix TCP/UDP checksum offload for IPv6 pkts
Don't offload IP header checksum to NIC.
This fixes a previous patch which enabled checksum offloading
for both IPv4 and IPv6 packets. So L3 checksum offload was
getting enabled for IPv6 pkts. And HW is dropping these pkts
as it assumes the pkt is IPv4 when IP csum offload is set
in the SQ descriptor.
Fixes:
3a9024f52c2e ("net: thunderx: Enable TSO and checksum offloads for ipv6")
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 24 Nov 2017 08:35:25 +0000 (09:35 +0100)]
cfg80211: select CRYPTO_SHA256 if needed
When regulatory database certificates are built-in, they're
currently using the SHA256 digest algorithm, so add that to
the build in that case.
Also add a note that for custom certificates, one may need
to add the right algorithms.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Zhu Yanjun [Mon, 20 Nov 2017 03:21:08 +0000 (22:21 -0500)]
forcedeth: replace pci_unmap_page with dma_unmap_page
The function pci_unmap_page is obsolete. So it is replaced with
the function dma_unmap_page.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 24 Nov 2017 20:07:17 +0000 (05:07 +0900)]
Merge tag 'rxrpc-fixes-
20171124' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fixes and improvements
Here's a set of patches that fix and improve some stuff in the AF_RXRPC
protocol:
The patches are:
(1) Unlock mutex returned by rxrpc_accept_call().
(2) Don't set connection upgrade by default.
(3) Differentiate the call->user_mutex used by the kernel from that used
by userspace calling sendmsg() to avoid lockdep warnings.
(4) Delay terminal ACK transmission to a work queue so that it can be
replaced by the next call if there is one.
(5) Split the call parameters from the connection parameters so that more
call-specific parameters can be passed through.
(6) Fix the call timeouts to work the same as for other RxRPC/AFS
implementations.
(7) Don't transmit DELAY ACKs immediately, but instead delay them slightly
so that can be discarded or can represent more packets.
(8) Use RTT to calculate certain protocol timeouts.
(9) Add a timeout to detect lost ACK/DATA packets.
(10) Add a keepalive function so that we ping the peer if we haven't
transmitted for a short while, thereby keeping intervening firewall
routes open.
(11) Make service endpoints expire like they're supposed to so that the UDP
port can be reused.
(12) Fix connection expiry timers to make cleanup happen in a more timely
fashion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Fri, 24 Nov 2017 10:18:42 +0000 (10:18 +0000)]
rxrpc: Fix conn expiry timers
Fix the rxrpc connection expiry timers so that connections for closed
AF_RXRPC sockets get deleted in a more timely fashion, freeing up the
transport UDP port much more quickly.
(1) Replace the delayed work items with work items plus timers so that
timer_reduce() can be used to shorten them and so that the timer
doesn't requeue the work item if the net namespace is dead.
(2) Don't use queue_delayed_work() as that won't alter the timeout if the
timer is already running.
(3) Don't rearm the timers if the network namespace is dead.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 24 Nov 2017 10:18:42 +0000 (10:18 +0000)]
rxrpc: Fix service endpoint expiry
RxRPC service endpoints expire like they're supposed to by the following
means:
(1) Mark dead rxrpc_net structs (with ->live) rather than twiddling the
global service conn timeout, otherwise the first rxrpc_net struct to
die will cause connections on all others to expire immediately from
then on.
(2) Mark local service endpoints for which the socket has been closed
(->service_closed) so that the expiration timeout can be much
shortened for service and client connections going through that
endpoint.
(3) rxrpc_put_service_conn() needs to schedule the reaper when the usage
count reaches 1, not 0, as idle conns have a 1 count.
(4) The accumulator for the earliest time we might want to schedule for
should be initialised to jiffies + MAX_JIFFY_OFFSET, not ULONG_MAX as
the comparison functions use signed arithmetic.
(5) Simplify the expiration handling, adding the expiration value to the
idle timestamp each time rather than keeping track of the time in the
past before which the idle timestamp must go to be expired. This is
much easier to read.
(6) Ignore the timeouts if the net namespace is dead.
(7) Restart the service reaper work item rather the client reaper.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 24 Nov 2017 10:18:42 +0000 (10:18 +0000)]
rxrpc: Add keepalive for a call
We need to transmit a packet every so often to act as a keepalive for the
peer (which has a timeout from the last time it received a packet) and also
to prevent any intervening firewalls from closing the route.
Do this by resetting a timer every time we transmit a packet. If the timer
ever expires, we transmit a PING ACK packet and thereby also elicit a PING
RESPONSE ACK from the other side - which prevents our last-rx timeout from
expiring.
The timer is set to 1/6 of the last-rx timeout so that we can detect the
other side going away if it misses 6 replies in a row.
This is particularly necessary for servers where the processing of the
service function may take a significant amount of time.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 24 Nov 2017 10:18:42 +0000 (10:18 +0000)]
rxrpc: Add a timeout for detecting lost ACKs/lost DATA
Add an extra timeout that is set/updated when we send a DATA packet that
has the request-ack flag set. This allows us to detect if we don't get an
ACK in response to the latest flagged packet.
The ACK packet is adjudged to have been lost if it doesn't turn up within
2*RTT of the transmission.
If the timeout occurs, we schedule the sending of a PING ACK to find out
the state of the other side. If a new DATA packet is ready to go sooner,
we cancel the sending of the ping and set the request-ack flag on that
instead.
If we get back a PING-RESPONSE ACK that indicates a lower tx_top than what
we had at the time of the ping transmission, we adjudge all the DATA
packets sent between the response tx_top and the ping-time tx_top to have
been lost and retransmit immediately.
Rather than sending a PING ACK, we could just pick a DATA packet and
speculatively retransmit that with request-ack set. It should result in
either a REQUESTED ACK or a DUPLICATE ACK which we can then use in lieu the
a PING-RESPONSE ACK mentioned above.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 24 Nov 2017 10:18:41 +0000 (10:18 +0000)]
rxrpc: Express protocol timeouts in terms of RTT
Express protocol timeouts for data retransmission and deferred ack
generation in terms on RTT rather than specified timeouts once we have
sufficient RTT samples.
For the moment, this requires just one RTT sample to be able to use this
for ack deferral and two for data retransmission.
The data retransmission timeout is set at RTT*1.5 and the ACK deferral
timeout is set at RTT.
Note that the calculated timeout is limited to a minimum of 4ns to make
sure it doesn't happen too quickly.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 24 Nov 2017 10:18:41 +0000 (10:18 +0000)]
rxrpc: Don't transmit DELAY ACKs immediately on proposal
Don't transmit a DELAY ACK immediately on proposal when the Rx window is
rotated, but rather defer it to the work function. This means that we have
a chance to queue/consume more received packets before we actually send the
DELAY ACK, or even cancel it entirely, thereby reducing the number of
packets transmitted.
We do, however, want to continue sending other types of packet immediately,
particularly REQUESTED ACKs, as they may be used for RTT calculation by the
other side.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 24 Nov 2017 10:18:41 +0000 (10:18 +0000)]
rxrpc: Fix call timeouts
Fix the rxrpc call expiration timeouts and make them settable from
userspace. By analogy with other rx implementations, there should be three
timeouts:
(1) "Normal timeout"
This is set for all calls and is triggered if we haven't received any
packets from the peer in a while. It is measured from the last time
we received any packet on that call. This is not reset by any
connection packets (such as CHALLENGE/RESPONSE packets).
If a service operation takes a long time, the server should generate
PING ACKs at a duration that's substantially less than the normal
timeout so is to keep both sides alive. This is set at 1/6 of normal
timeout.
(2) "Idle timeout"
This is set only for a service call and is triggered if we stop
receiving the DATA packets that comprise the request data. It is
measured from the last time we received a DATA packet.
(3) "Hard timeout"
This can be set for a call and specified the maximum lifetime of that
call. It should not be specified by default. Some operations (such
as volume transfer) take a long time.
Allow userspace to set/change the timeouts on a call with sendmsg, using a
control message:
RXRPC_SET_CALL_TIMEOUTS
The data to the message is a number of 32-bit words, not all of which need
be given:
u32 hard_timeout; /* sec from first packet */
u32 idle_timeout; /* msec from packet Rx */
u32 normal_timeout; /* msec from data Rx */
This can be set in combination with any other sendmsg() that affects a
call.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 24 Nov 2017 10:18:41 +0000 (10:18 +0000)]
rxrpc: Split the call params from the operation params
When rxrpc_sendmsg() parses the control message buffer, it places the
parameters extracted into a structure, but lumps together call parameters
(such as user call ID) with operation parameters (such as whether to send
data, send an abort or accept a call).
Split the call parameters out into their own structure, a copy of which is
then embedded in the operation parameters struct.
The call parameters struct is then passed down into the places that need it
instead of passing the individual parameters. This allows for extra call
parameters to be added.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 24 Nov 2017 10:18:41 +0000 (10:18 +0000)]
rxrpc: Delay terminal ACK transmission on a client call
Delay terminal ACK transmission on a client call by deferring it to the
connection processor. This allows it to be skipped if we can send the next
call instead, the first DATA packet of which will implicitly ack this call.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 24 Nov 2017 10:18:40 +0000 (10:18 +0000)]
rxrpc: Provide a different lockdep key for call->user_mutex for kernel calls
Provide a different lockdep key for rxrpc_call::user_mutex when the call is
made on a kernel socket, such as by the AFS filesystem.
The problem is that lockdep registers a false positive between userspace
calling the sendmsg syscall on a user socket where call->user_mutex is held
whilst userspace memory is accessed whereas the AFS filesystem may perform
operations with mmap_sem held by the caller.
In such a case, the following warning is produced.
======================================================
WARNING: possible circular locking dependency detected
4.14.0-fscache+ #243 Tainted: G E
------------------------------------------------------
modpost/16701 is trying to acquire lock:
(&vnode->io_lock){+.+.}, at: [<
ffffffffa000fc40>] afs_begin_vnode_operation+0x33/0x77 [kafs]
but task is already holding lock:
(&mm->mmap_sem){++++}, at: [<
ffffffff8104376a>] __do_page_fault+0x1ef/0x486
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&mm->mmap_sem){++++}:
__might_fault+0x61/0x89
_copy_from_iter_full+0x40/0x1fa
rxrpc_send_data+0x8dc/0xff3
rxrpc_do_sendmsg+0x62f/0x6a1
rxrpc_sendmsg+0x166/0x1b7
sock_sendmsg+0x2d/0x39
___sys_sendmsg+0x1ad/0x22b
__sys_sendmsg+0x41/0x62
do_syscall_64+0x89/0x1be
return_from_SYSCALL_64+0x0/0x75
-> #2 (&call->user_mutex){+.+.}:
__mutex_lock+0x86/0x7d2
rxrpc_new_client_call+0x378/0x80e
rxrpc_kernel_begin_call+0xf3/0x154
afs_make_call+0x195/0x454 [kafs]
afs_vl_get_capabilities+0x193/0x198 [kafs]
afs_vl_lookup_vldb+0x5f/0x151 [kafs]
afs_create_volume+0x2e/0x2f4 [kafs]
afs_mount+0x56a/0x8d7 [kafs]
mount_fs+0x6a/0x109
vfs_kern_mount+0x67/0x135
do_mount+0x90b/0xb57
SyS_mount+0x72/0x98
do_syscall_64+0x89/0x1be
return_from_SYSCALL_64+0x0/0x75
-> #1 (k-sk_lock-AF_RXRPC){+.+.}:
lock_sock_nested+0x74/0x8a
rxrpc_kernel_begin_call+0x8a/0x154
afs_make_call+0x195/0x454 [kafs]
afs_fs_get_capabilities+0x17a/0x17f [kafs]
afs_probe_fileserver+0xf7/0x2f0 [kafs]
afs_select_fileserver+0x83f/0x903 [kafs]
afs_fetch_status+0x89/0x11d [kafs]
afs_iget+0x16f/0x4f8 [kafs]
afs_mount+0x6c6/0x8d7 [kafs]
mount_fs+0x6a/0x109
vfs_kern_mount+0x67/0x135
do_mount+0x90b/0xb57
SyS_mount+0x72/0x98
do_syscall_64+0x89/0x1be
return_from_SYSCALL_64+0x0/0x75
-> #0 (&vnode->io_lock){+.+.}:
lock_acquire+0x174/0x19f
__mutex_lock+0x86/0x7d2
afs_begin_vnode_operation+0x33/0x77 [kafs]
afs_fetch_data+0x80/0x12a [kafs]
afs_readpages+0x314/0x405 [kafs]
__do_page_cache_readahead+0x203/0x2ba
filemap_fault+0x179/0x54d
__do_fault+0x17/0x60
__handle_mm_fault+0x6d7/0x95c
handle_mm_fault+0x24e/0x2a3
__do_page_fault+0x301/0x486
do_page_fault+0x236/0x259
page_fault+0x22/0x30
__clear_user+0x3d/0x60
padzero+0x1c/0x2b
load_elf_binary+0x785/0xdc7
search_binary_handler+0x81/0x1ff
do_execveat_common.isra.14+0x600/0x888
do_execve+0x1f/0x21
SyS_execve+0x28/0x2f
do_syscall_64+0x89/0x1be
return_from_SYSCALL_64+0x0/0x75
other info that might help us debug this:
Chain exists of:
&vnode->io_lock --> &call->user_mutex --> &mm->mmap_sem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_sem);
lock(&call->user_mutex);
lock(&mm->mmap_sem);
lock(&vnode->io_lock);
*** DEADLOCK ***
1 lock held by modpost/16701:
#0: (&mm->mmap_sem){++++}, at: [<
ffffffff8104376a>] __do_page_fault+0x1ef/0x486
stack backtrace:
CPU: 0 PID: 16701 Comm: modpost Tainted: G E 4.14.0-fscache+ #243
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
dump_stack+0x67/0x8e
print_circular_bug+0x341/0x34f
check_prev_add+0x11f/0x5d4
? add_lock_to_list.isra.12+0x8b/0x8b
? add_lock_to_list.isra.12+0x8b/0x8b
? __lock_acquire+0xf77/0x10b4
__lock_acquire+0xf77/0x10b4
lock_acquire+0x174/0x19f
? afs_begin_vnode_operation+0x33/0x77 [kafs]
__mutex_lock+0x86/0x7d2
? afs_begin_vnode_operation+0x33/0x77 [kafs]
? afs_begin_vnode_operation+0x33/0x77 [kafs]
? afs_begin_vnode_operation+0x33/0x77 [kafs]
afs_begin_vnode_operation+0x33/0x77 [kafs]
afs_fetch_data+0x80/0x12a [kafs]
afs_readpages+0x314/0x405 [kafs]
__do_page_cache_readahead+0x203/0x2ba
? filemap_fault+0x179/0x54d
filemap_fault+0x179/0x54d
__do_fault+0x17/0x60
__handle_mm_fault+0x6d7/0x95c
handle_mm_fault+0x24e/0x2a3
__do_page_fault+0x301/0x486
do_page_fault+0x236/0x259
page_fault+0x22/0x30
RIP: 0010:__clear_user+0x3d/0x60
RSP: 0018:
ffff880071e93da0 EFLAGS:
00010202
RAX:
0000000000000000 RBX:
000000000000011c RCX:
000000000000011c
RDX:
0000000000000000 RSI:
0000000000000008 RDI:
000000000060f720
RBP:
000000000060f720 R08:
0000000000000001 R09:
0000000000000000
R10:
0000000000000001 R11:
ffff8800b5459b68 R12:
ffff8800ce150e00
R13:
000000000060f720 R14:
00000000006127a8 R15:
0000000000000000
padzero+0x1c/0x2b
load_elf_binary+0x785/0xdc7
search_binary_handler+0x81/0x1ff
do_execveat_common.isra.14+0x600/0x888
do_execve+0x1f/0x21
SyS_execve+0x28/0x2f
do_syscall_64+0x89/0x1be
entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7fdb6009ee07
RSP: 002b:
00007fff566d9728 EFLAGS:
00000246 ORIG_RAX:
000000000000003b
RAX:
ffffffffffffffda RBX:
000055ba57280900 RCX:
00007fdb6009ee07
RDX:
000055ba5727f270 RSI:
000055ba5727cac0 RDI:
000055ba57280900
RBP:
000055ba57280900 R08:
00007fff566d9700 R09:
0000000000000000
R10:
000055ba5727cac0 R11:
0000000000000246 R12:
0000000000000000
R13:
000055ba5727cac0 R14:
000055ba5727f270 R15:
0000000000000000
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 24 Nov 2017 10:18:40 +0000 (10:18 +0000)]
rxrpc: Don't set upgrade by default in sendmsg()
Don't set upgrade by default when creating a call from sendmsg(). This is
a holdover from when I was testing the code.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 24 Nov 2017 10:18:40 +0000 (10:18 +0000)]
rxrpc: The mutex lock returned by rxrpc_accept_call() needs releasing
The caller of rxrpc_accept_call() must release the lock on call->user_mutex
returned by that function.
Signed-off-by: David Howells <dhowells@redhat.com>
Linus Torvalds [Fri, 24 Nov 2017 07:18:46 +0000 (21:18 -1000)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix PCI IDs of 9000 series iwlwifi devices, from Luca Coelho.
2) bpf offload bug fixes from Jakub Kicinski.
3) Fix bpf verifier to NOP out code which is dead at run time because
due to branch pruning the verifier will not explore such
instructions. From Alexei Starovoitov.
4) Fix crash when deleting secondary chains in packet scheduler
classifier. From Roman Kapl.
5) Fix buffer management bugs in smc, from Ursula Braun.
6) Fix regression in anycast route handling, from David Ahern.
7) Fix link settings regression in r8169, from Tobias Jakobi.
8) Add back enough UFO support so that live migration still works, from
Willem de Bruijn.
9) Linearize enough packet data for the full extent to which the ipvlan
code will inspect the packet headers, from Gao Feng.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
ipvlan: Fix insufficient skb linear check for ipv6 icmp
ipvlan: Fix insufficient skb linear check for arp
geneve: only configure or fill UDP_ZERO_CSUM6_RX/TX info when CONFIG_IPV6
net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY
net: accept UFO datagrams from tuntap and packet
net: realtek: r8169: implement set_link_ksettings()
net: ipv6: Fixup device for anycast routes during copy
net/smc: Fix preinitialization of buf_desc in __smc_buf_create()
net/smc: use sk_rcvbuf as start for rmb creation
ipv6: Do not consider linkdown nexthops during multipath
net: sched: fix crash when deleting secondary chains
net: phy: cortina: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
bpf: fix branch pruning logic
bpf: change bpf_perf_event_output arg5 type to ARG_CONST_SIZE_OR_ZERO
bpf: change bpf_probe_read_str arg2 type to ARG_CONST_SIZE_OR_ZERO
bpf: remove explicit handling of 0 for arg2 in bpf_probe_read
bpf: introduce ARG_PTR_TO_MEM_OR_NULL
i40evf: Use smp_rmb rather than read_barrier_depends
fm10k: Use smp_rmb rather than read_barrier_depends
igb: Use smp_rmb rather than read_barrier_depends
...
Linus Torvalds [Fri, 24 Nov 2017 07:14:30 +0000 (21:14 -1000)]
Merge tag 'platform-drivers-x86-v4.15-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Fix two issues resulting from the dell-smbios refactoring and
introduction of the dell-smbios-wmi dispatcher.
The first ensures a proper error code is returned when kzalloc fails.
The second avoids an issue in older Dell BIOS implementations which
would fail if the more complex calls were made by limiting those
platforms to the simple calls such as those used by the existing
dell-laptop and dell-wmi drivers, preserving their functionality prior
to the addition of the dell-smbios-wmi dispatcher"
* tag 'platform-drivers-x86-v4.15-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: dell-laptop: fix error return code in dell_init()
platform/x86: dell-smbios-wmi: Disable userspace interface if missing hotfix
Linus Torvalds [Fri, 24 Nov 2017 07:12:58 +0000 (21:12 -1000)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two basic fixes: one for the sparse problem with the blacklist flags
and another for a hang forever in bnx2i"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Use 'blist_flags_t' for scsi_devinfo flags
scsi: bnx2fc: Fix hung task messages when a cleanup response is not received during abort
Linus Torvalds [Fri, 24 Nov 2017 07:09:41 +0000 (21:09 -1000)]
Merge tag 'sound-fix-4.15-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All commits found here are small fixes for regression or stable:
- PCM timestamp behavior fix that could be seen as a regression
- Remove spurious WARN_ON() from ALSA timer 32bit compat ioctl
- HD-audio HDMI/DP channel mapping fix for 32bit archs
- Fix the previous fix for HD-audio initialization code
- More hardening USB-audio against malicious USB descriptors
- HD-audio quirks/fixes (Realtek codec, AMD controller)
- Missing help text for the recent Intel SST kconfig change"
* tag 'sound-fix-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Add Raven PCI ID
ALSA: hda/realtek - Fix ALC700 family no sound issue
ALSA: hda - Fix yet remaining issue with vmaster 0dB initialization
ALSA: usb-audio: Add sanity checks in v2 clock parsers
ALSA: usb-audio: Fix potential zero-division at parsing FU
ALSA: usb-audio: Fix potential out-of-bound access at parsing SU
ALSA: usb-audio: Add sanity checks to FE parser
ALSA: timer: Remove kernel warning at compat ioctl error paths
ALSA: pcm: update tstamp only if audio_tstamp changed
ALSA: hda/realtek: Add headset mic support for Intel NUC Skull Canyon
ALSA: hda: Fix too short HDMI/DP chmap reporting
ALSA: usb-audio: uac1: Invalidate ctl on interrupt
ALSA: hda/realtek - Fix ALC275 no sound issue
ASoC: Intel: Add help text for SND_SOC_INTEL_SST_TOPLEVEL
Linus Torvalds [Fri, 24 Nov 2017 07:04:56 +0000 (21:04 -1000)]
Merge tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux
Pull more drm updates from Dave Airlie:
"Fixes/cleanups for rc1, non-desktop flags for VR
- remove the MSM dt-bindings file Rob managed to push in the previous
pull.
- add a property/edid quirk to denote HMD devices, I had these
hanging around for a few weeks and Keith had done some work on
them, they are fairly self contained and small, and only affect
people using HTC Vive VR headsets so far.
- amdgpu, tegra, tilcdc, fsl fixes
- some imx-drm cleanups I missed, these seemed pretty small, and no
reason to hold off.
I have one TTM regression fix (fixes bochs-vga in qemu) sitting
locally awaiting review I'll probably send that in a separate pull
request tomorrow"
* tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux: (33 commits)
dt-bindings: remove file that was added accidentally
drm/edid: quirk HTC vive headset as non-desktop. [v2]
drm/fb: add support for not enabling fbcon on non-desktop displays [v2]
drm: add connector info/property for non-desktop displays [v2]
drm/amdgpu: fix rmmod KCQ disable failed error
drm/amdgpu: fix kernel hang when starting VNC server
drm/amdgpu: don't skip attributes when powerplay is enabled
drm/amd/pp: fix typecast error in powerplay.
drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding support
drm/tegra: sor: Reimplement pad clock
Revert "drm/radeon: dont switch vt on suspend"
drm/amd/amdgpu: fix over-bound accessing in amdgpu_cs_wait_any_fence
drm/amd/powerplay: fix unfreeze level smc message for smu7
drm/amdgpu:fix memleak
drm/amdgpu:fix memleak in takedown
drm/amd/pp: fix dpm randomly failed on Vega10
drm/amdgpu: set f_mapping on exported DMA-bufs
drm/amdgpu: Properly allocate VM invalidate eng v2
drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()
drm/fsl-dcu: avoid disabling pixel clock twice on suspend
...
Linus Torvalds [Fri, 24 Nov 2017 07:01:32 +0000 (21:01 -1000)]
Merge tag 'docs-4.15-2' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A few late-arriving docs updates that have no real reason to wait.
There's a new "Co-Developed-by" tag described by Greg, and a build
enhancement from Willy to generate docs warnings during a kernel build
(but only when additional warnings have been requested in general)"
* tag 'docs-4.15-2' of git://git.lwn.net/linux:
Add optional check for bad kernel-doc comments
Documentation: fix profile= options in kernel-parameters.txt
documentation/svga.txt: update outdated file
kokr/memory-barriers.txt: Fix typo in paring example
kokr/memory-barriers/txt: Replace uses of "transitive"
Documentation/process: add Co-Developed-by: tag for patches with multiple authors
Linus Torvalds [Fri, 24 Nov 2017 06:51:27 +0000 (20:51 -1000)]
Merge branch 'next-keys' of git://git./linux/kernel/git/jmorris/linux-security
Pull keys update from James Morris:
"There's nothing too controversial here:
- Doc fix for keyctl_read().
- time_t -> time64_t replacement.
- Set the module licence on things to prevent tainting"
* 'next-keys' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
pkcs7: Set the module licence to prevent tainting
security: keys: Replace time_t with time64_t for struct key_preparsed_payload
security: keys: Replace time_t/timespec with time64_t
KEYS: fix in-kernel documentation for keyctl_read()
Linus Torvalds [Fri, 24 Nov 2017 06:48:26 +0000 (20:48 -1000)]
Merge tag 'apparmor-pr-2017-11-21' of git://git./linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"No features this time, just minor cleanups and bug fixes.
Cleanups:
- fix spelling mistake: "resoure" -> "resource"
- remove unused redundant variable stop
- Fix bool initialization/comparison
Bug Fixes:
- initialized returned struct aa_perms
- fix leak of null profile name if profile allocation fails
- ensure that undecidable profile attachments fail
- fix profile attachment for special unconfined profiles
- fix locking when creating a new complain profile.
- fix possible recursive lock warning in __aa_create_ns"
* tag 'apparmor-pr-2017-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix possible recursive lock warning in __aa_create_ns
apparmor: fix locking when creating a new complain profile.
apparmor: fix profile attachment for special unconfined profiles
apparmor: ensure that undecidable profile attachments fail
apparmor: fix leak of null profile name if profile allocation fails
apparmor: remove unused redundant variable stop
apparmor: Fix bool initialization/comparison
apparmor: initialized returned struct aa_perms
apparmor: fix spelling mistake: "resoure" -> "resource"
James Morris [Fri, 24 Nov 2017 00:54:11 +0000 (11:54 +1100)]
Merge tag 'keys-next-
20171123' of git://git./linux/kernel/git/dhowells/linux-fs into next-keys
Merge keys subsystem changes from David Howells, for v4.15.
David S. Miller [Thu, 23 Nov 2017 18:37:03 +0000 (03:37 +0900)]
Merge branch 'ipvlan-Fix-insufficient-skb-linear-check'
Gao Feng says:
====================
ipvlan: Fix insufficient skb linear check
The current ipvlan codes use pskb_may_pull to get the skb linear header in
func ipvlan_get_L3_hdr, but the size isn't enough for arp and ipv6 icmp.
So it may access the unexpected momory in ipvlan_addr_lookup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Thu, 23 Nov 2017 03:47:12 +0000 (11:47 +0800)]
ipvlan: Fix insufficient skb linear check for ipv6 icmp
In the function ipvlan_get_L3_hdr, current codes use pskb_may_pull to
make sure the skb header has enough linear room for ipv6 header. But it
would use the latter memory directly without linear check when it is icmp.
So it still may access the unepxected memory in ipvlan_addr_lookup.
Now invoke the pskb_may_pull again if it is ipv6 icmp.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Thu, 23 Nov 2017 03:47:11 +0000 (11:47 +0800)]
ipvlan: Fix insufficient skb linear check for arp
In the function ipvlan_get_L3_hdr, current codes use pskb_may_pull to
make sure the skb header has enough linear room for arp header. But it
would access the arp payload in func ipvlan_addr_lookup. So it still may
access the unepxected memory.
Now use arp_hdr_len(port->dev) instead of the arp header as the param.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Thu, 23 Nov 2017 03:27:24 +0000 (11:27 +0800)]
geneve: only configure or fill UDP_ZERO_CSUM6_RX/TX info when CONFIG_IPV6
Stefano pointed that configure or show UDP_ZERO_CSUM6_RX/TX info doesn't
make sense if we haven't enabled CONFIG_IPV6. Fix it by adding
if IS_ENABLED(CONFIG_IPV6) check.
Fixes:
abe492b4f50c ("geneve: UDP checksum configuration via netlink")
Fixes:
fd7eafd02121 ("geneve: fix fill_info when link down")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 23 Nov 2017 18:06:42 +0000 (03:06 +0900)]
Merge tag 'wireless-drivers-for-davem-2017-11-22' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.15
First set of fixes for 4.15. Most important here is the iwlwifi fix
for scan command firmware interface change.
ath10k
* fix CCMP-256, GCMP and GCMP-256 in raw mode, it was never working
wcn36xx
* fix device tree node search
iwlwifi
* fix a regression with firmware API change of scan cmd (introduced in
firmware version 34)
* add a bunch of PCI IDs and fix configuration structs for A000 devices
* fix the exported firmware name strings for 9000 and A000 devices
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 23 Nov 2017 17:53:38 +0000 (02:53 +0900)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2017-11-21
This series contains fixes for igb/vf, ixgbe/vf, i40e/vf and fm10k.
Jake fixes a regression issue with older firmware, where we were using
the NVM lock to synchronize NVM reads for all devices and firmware
versions, yet this caused issues with older firmware prior to version
1.5. Fixed this by only grabbing the lock for newer devices and firmware
version 1.5 or newer.
Zijie Pan fixes the calculation of the i40e VF MAC addresses, where it was
possible to increment to the next MAC entry without calling
i40e_add_mac_filter().
Amritha removes the upper limit of 64 queues on a channel VSI since the
upper bound is determined by the VSI's num_queue_pairs.
Filip fixes an issue during FLR resets, where should have been checking
for upcoming core reset and if so, just return with I40E_ERR_NOT_READY.
Alan fixes the notifying clients of l2 parameters by copying the
parameters to the client instance struct and re-organizes the priority
in which the client tasks fire so that if the flag for notifying l2
params is set, it will trigger before the client open task. Also fixed
the promiscuous settings after reset for all the VSI's.
Brian King from IBM fixes an issue seen on Power systems which would
result in skb list corruption and eventual kernel oops. Brian
provides the same fix for nearly all our drivers, to replace the
read_barrier_depends with smp_rmb() to ensure loads are ordered with
respect to the load of tx_buffer->next_to_watch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 22 Nov 2017 01:37:46 +0000 (17:37 -0800)]
net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY
The PHY on BCM7278 has an additional bit that needs to be cleared:
IDDQ_GLOBAL_PWR, without doing this, the PHY remains stuck in reset out
of suspend/resume cycles.
Fixes:
0fe9933804eb ("net: dsa: bcm_sf2: Add support for BCM7278 integrated switch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 23 Nov 2017 17:33:01 +0000 (02:33 +0900)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2017-11-23
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Several BPF offloading fixes, from Jakub. Among others:
- Limit offload to cls_bpf and XDP program types only.
- Move device validation into the driver and don't make
any assumptions about the device in the classifier due
to shared blocks semantics.
- Don't pass offloaded XDP program into the driver when
it should be run in native XDP instead. Offloaded ones
are not JITed for the host in such cases.
- Don't destroy device offload state when moved to
another namespace.
- Revert dumping offload info into user space for now,
since ifindex alone is not sufficient. This will be
redone properly for bpf-next tree.
2) Fix test_verifier to avoid using bpf_probe_write_user()
helper in test cases, since it's dumping a warning into
kernel log which may confuse users when only running tests.
Switch to use bpf_trace_printk() instead, from Yonghong.
3) Several fixes for correcting ARG_CONST_SIZE_OR_ZERO semantics
before it becomes uabi, from Gianluca. More specifically:
- Add a type ARG_PTR_TO_MEM_OR_NULL that is used only
by bpf_csum_diff(), where the argument is either a
valid pointer or NULL. The subsequent ARG_CONST_SIZE_OR_ZERO
then enforces a valid pointer in case of non-0 size
or a valid pointer or NULL in case of size 0. Given
that, the semantics for ARG_PTR_TO_MEM in combination
with ARG_CONST_SIZE_OR_ZERO are now such that in case
of size 0, the pointer must always be valid and cannot
be NULL. This fix in semantics allows for bpf_probe_read()
to drop the recently added size == 0 check in the helper
that would become part of uabi otherwise once released.
At the same time we can then fix bpf_probe_read_str() and
bpf_perf_event_output() to use ARG_CONST_SIZE_OR_ZERO
instead of ARG_CONST_SIZE in order to fix recently
reported issues by Arnaldo et al, where LLVM optimizes
two boundary checks into a single one for unknown
variables where the verifier looses track of the variable
bounds and thus rejects valid programs otherwise.
4) A fix for the verifier for the case when it detects
comparison of two constants where the branch is guaranteed
to not be taken at runtime. Verifier will rightfully prune
the exploration of such paths, but we still pass the program
to JITs, where they would complain about using reserved
fields, etc. Track such dead instructions and sanitize
them with mov r0,r0. Rejection is not possible since LLVM
may generate them for valid C code and doesn't do as much
data flow analysis as verifier. For bpf-next we might
implement removal of such dead code and adjust branches
instead. Fix from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Tue, 21 Nov 2017 15:22:25 +0000 (10:22 -0500)]
net: accept UFO datagrams from tuntap and packet
Tuntap and similar devices can inject GSO packets. Accept type
VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively.
Processes are expected to use feature negotiation such as TUNSETOFFLOAD
to detect supported offload types and refrain from injecting other
packets. This process breaks down with live migration: guest kernels
do not renegotiate flags, so destination hosts need to expose all
features that the source host does.
Partially revert the UFO removal from
182e0b6b5846~1..
d9d30adf5677.
This patch introduces nearly(*) no new code to simplify verification.
It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP
insertion and software UFO segmentation.
It does not reinstate protocol stack support, hardware offload
(NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception
of VIRTIO_NET_HDR_GSO_UDP packets in tuntap.
To support SKB_GSO_UDP reappearing in the stack, also reinstate
logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD
by squashing in commit
939912216fa8 ("net: skb_needs_check() removes
CHECKSUM_UNNECESSARY check for tx.") and reverting commit
8d63bee643f1
("net: avoid skb_warn_bad_offload false positives on UFO").
(*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id,
ipv6_proxy_select_ident is changed to return a __be32 and this is
assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted
at the end of the enum to minimize code churn.
Tested
Booted a v4.13 guest kernel with QEMU. On a host kernel before this
patch `ethtool -k eth0` shows UFO disabled. After the patch, it is
enabled, same as on a v4.13 host kernel.
A UFO packet sent from the guest appears on the tap device:
host:
nc -l -p -u 8000 &
tcpdump -n -i tap0
guest:
dd if=/dev/zero of=payload.txt bs=1 count=2000
nc -u 192.16.1.1 8000 < payload.txt
Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds,
packets arriving fragmented:
./with_tap_pair.sh ./tap_send_ufo tap0 tap1
(from https://github.com/wdebruij/kerneltools/tree/master/tests)
Changes
v1 -> v2
- simplified set_offload change (review comment)
- documented test procedure
Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com>
Fixes:
fb652fdfe837 ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Jakobi [Tue, 21 Nov 2017 15:15:57 +0000 (16:15 +0100)]
net: realtek: r8169: implement set_link_ksettings()
Commit
6fa1ba61520576cf1346c4ff09a056f2950cb3bf partially
implemented the new ethtool API, by replacing get_settings()
with get_link_ksettings(). This breaks ethtool, since the
userspace tool (according to the new API specs) never tries
the legacy set() call, when the new get() call succeeds.
All attempts to chance some setting from userspace result in:
> Cannot set new settings: Operation not supported
Implement the missing set() call.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 21 Nov 2017 15:08:57 +0000 (07:08 -0800)]
net: ipv6: Fixup device for anycast routes during copy
Florian reported a breakage with anycast routes due to commit
4832c30d5458 ("net: ipv6: put host and anycast routes on device with
address"). Prior to this commit anycast routes were added against the
loopback device causing repetitive route entries with no insight into
why they existed. e.g.:
$ ip -6 ro ls table local type anycast
anycast 2001:db8:1:: dev lo proto kernel metric 0 pref medium
anycast 2001:db8:2:: dev lo proto kernel metric 0 pref medium
anycast fe80:: dev lo proto kernel metric 0 pref medium
anycast fe80:: dev lo proto kernel metric 0 pref medium
The point of commit
4832c30d5458 is to add the routes using the device
with the address which is causing the route to be added. e.g.,:
$ ip -6 ro ls table local type anycast
anycast 2001:db8:1:: dev eth1 proto kernel metric 0 pref medium
anycast 2001:db8:2:: dev eth2 proto kernel metric 0 pref medium
anycast fe80:: dev eth2 proto kernel metric 0 pref medium
anycast fe80:: dev eth1 proto kernel metric 0 pref medium
For traffic to work as it did before, the dst device needs to be switched
to the loopback when the copy is created similar to local routes.
Fixes:
4832c30d5458 ("net: ipv6: put host and anycast routes on device with address")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 23 Nov 2017 16:33:34 +0000 (01:33 +0900)]
Merge branch 'smc-fixes-for-smc-buffer-handling'
Ursula Braun says:
====================
net/smc: fixes for smc buffer handling
here are 2 cleanup patches for smc buffer handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Tue, 21 Nov 2017 12:23:54 +0000 (13:23 +0100)]
net/smc: Fix preinitialization of buf_desc in __smc_buf_create()
With gcc-4.1.2:
net/smc/smc_core.c: In function ‘__smc_buf_create’:
net/smc/smc_core.c:567: warning: ‘bufsize’ may be used uninitialized in this function
Indeed, if the for-loop is never executed, bufsize is used
uninitialized. In addition, buf_desc is stored for later use, while it
is still a NULL pointer.
Before, error handling was done by checking if buf_desc is non-NULL.
The cleanup changed this to an error check, but forgot to update the
preinitialization of buf_desc to an error pointer.
Update the preinitializatin of buf_desc to fix this.
Fixes:
b33982c3a6838d13 ("net/smc: cleanup function __smc_buf_create()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Tue, 21 Nov 2017 12:23:53 +0000 (13:23 +0100)]
net/smc: use sk_rcvbuf as start for rmb creation
Commit
3e034725c0d8 ("net/smc: common functions for RMBs and send buffers")
merged handling of SMC receive and send buffers. It introduced sk_buf_size
as merged start value for size determination. But since sk_buf_size is not
used at all, sk_sndbuf is erroneously used as start for rmb creation.
This patch makes sure, sk_buf_size is really used as intended, and
sk_rcvbuf is used as start value for rmb creation.
Fixes:
3e034725c0d8 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 21 Nov 2017 07:50:12 +0000 (09:50 +0200)]
ipv6: Do not consider linkdown nexthops during multipath
When the 'ignore_routes_with_linkdown' sysctl is set, we should not
consider linkdown nexthops during route lookup.
While the code correctly verifies that the initially selected route
('match') has a carrier, it does not perform the same check in the
subsequent multipath selection, resulting in a potential packet loss.
In case the chosen route does not have a carrier and the sysctl is set,
choose the initially selected route.
Fixes:
35103d11173b ("net: ipv6 sysctl option to ignore routes when nexthop link is down")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Kapl [Mon, 20 Nov 2017 21:21:13 +0000 (22:21 +0100)]
net: sched: fix crash when deleting secondary chains
If you flush (delete) a filter chain other than chain 0 (such as when
deleting the device), the kernel may run into a use-after-free. The
chain refcount must not be decremented unless we are sure we are done
with the chain.
To reproduce the bug, run:
ip link add dtest type dummy
tc qdisc add dev dtest ingress
tc filter add dev dtest chain 1 parent ffff: flower
ip link del dtest
Introduced in: commit
f93e1cdcf42c ("net/sched: fix filter flushing"),
but unless you have KAsan or luck, you won't notice it until
commit
0dadc117ac8b ("cls_flower: use tcf_exts_get_net() before call_rcu()")
Fixes:
f93e1cdcf42c ("net/sched: fix filter flushing")
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Roman Kapl <code@rkapl.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Chan [Mon, 20 Nov 2017 20:57:42 +0000 (12:57 -0800)]
net: phy: cortina: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
This change resolves a new compile-time warning
when built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/net/phy/cortina.o
see include/linux/module.h for more information
This adds the license as "GPL", which matches the header of the file.
MODULE_DESCRIPTION and MODULE_AUTHOR are also added.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Thu, 23 Nov 2017 00:42:05 +0000 (16:42 -0800)]
bpf: fix branch pruning logic
when the verifier detects that register contains a runtime constant
and it's compared with another constant it will prune exploration
of the branch that is guaranteed not to be taken at runtime.
This is all correct, but malicious program may be constructed
in such a way that it always has a constant comparison and
the other branch is never taken under any conditions.
In this case such path through the program will not be explored
by the verifier. It won't be taken at run-time either, but since
all instructions are JITed the malicious program may cause JITs
to complain about using reserved fields, etc.
To fix the issue we have to track the instructions explored by
the verifier and sanitize instructions that are dead at run time
with NOPs. We cannot reject such dead code, since llvm generates
it for valid C code, since it doesn't do as much data flow
analysis as the verifier does.
Fixes:
17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>