OSDN Git Service
Alex Smith [Wed, 21 Oct 2015 08:57:44 +0000 (09:57 +0100)]
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()
Add user-mode implementations of gettimeofday() and clock_gettime() to
the VDSO. This is currently usable with 2 clocksources: the CP0 count
register, which is accessible to user-mode via RDHWR on R2 and later
cores, or the MIPS Global Interrupt Controller (GIC) timer, which
provides a "user-mode visible" section containing a mirror of its
counter registers. This section must be mapped into user memory, which
is done below the VDSO data page.
When a supported clocksource is not in use, the VDSO functions will
return -ENOSYS, which causes libc to fall back on the standard syscall
path.
When support for neither of these clocksources is compiled into the
kernel at all, the VDSO still provides clock_gettime(), as the coarse
realtime/monotonic clocks can still be implemented. However,
gettimeofday() is not provided in this case as nothing can be done
without a suitable clocksource. This causes the symbol lookup to fail
in libc and it will then always use the standard syscall path.
This patch includes a workaround for a bug in QEMU which results in
RDHWR on the CP0 count register always returning a constant (incorrect)
value. A fix for this has been submitted, and the workaround can be
removed after the fix has been in stable releases for a reasonable
amount of time.
A simple performance test which calls gettimeofday() 1000 times in a
loop and calculates the average execution time gives the following
results on a Malta + I6400 (running at 20MHz):
- Syscall: ~31000 ns
- VDSO (GIC): ~15000 ns
- VDSO (CP0): ~9500 ns
[markos.chandras@imgtec.com:
- Minor code re-arrangements in order for mappings to be made
in the order they appear to the process' address space.
- Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef
- Use gic_get_usm_range so we can do the GIC mapping in the
arch/mips/kernel/vdso instead of the GIC irqchip driver]
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11338/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Alex Smith [Mon, 12 Oct 2015 09:40:43 +0000 (10:40 +0100)]
irqchip: irq-mips-gic: Provide function to map GIC user section
The GIC provides a "user-mode visible" section containing a mirror of
the counter registers which can be mapped into user memory. This will
be used by the VDSO time function implementations, so provide a
function to map it in.
When the GIC is not enabled in Kconfig a dummy inline version of this
function is provided, along with "#define gic_present 0", so that we
don't have to litter the VDSO code with ifdefs.
[markos.chandras@imgtec.com:
- Move mapping code to arch/mips/kernel/vdso.c and use a resource
type to get the GIC usermode information
- Avoid renaming function arguments and use __gic_base_addr to hold
the base GIC address prior to ioremap.]
[ralf@linux-mips.org: Fix up gic_get_usm_range() to compile and make inline
again.]
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/11281/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Alex Smith [Wed, 21 Oct 2015 08:54:38 +0000 (09:54 +0100)]
MIPS: Initial implementation of a VDSO
Add an initial implementation of a proper (i.e. an ELF shared library)
VDSO. With this commit it does not export any symbols, it only replaces
the current signal return trampoline page. A later commit will add user
implementations of gettimeofday()/clock_gettime().
To support both new toolchains and old ones which don't generate ABI
flags section, we define its content manually and then use a tool
(genvdso) to patch up the section to have the correct name and type.
genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the
kernel, and generates a C file containing a "struct mips_vdso_image"
containing both the VDSO data and these offsets. This C file is
compiled into the kernel.
On 64-bit kernels we require a different VDSO for each supported ABI,
so we may build up to 3 different VDSOs. The VDSO to use is selected by
the mips_abi structure.
A kernel/user shared data page is created and mapped below the VDSO
image. This is currently empty, but will be used by the user time
function implementations which are added later.
[markos.chandras@imgtec.com:
- Add more comments
- Move abi detection in genvdso.h since it's the get_symbol function
that needs it.
- Add an R6 specific way to calculate the base address of VDSO in order
to avoid the branch instruction which affects performance.
- Do not patch .gnu.attributes since it's not needed for dynamic linking.
- Simplify Makefile a little bit.
- checkpatch fixes
- Restrict VDSO support for binutils < 2.25 for pre-R6
- Include atomic64.h for O32 variant on MIPS64]
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11337/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:56 +0000 (17:51 +0200)]
MIPS: mpc30x_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts mpc30x_defconfig to use libata PATA
drivers.
PS This platform still uses "ide0=base[,ctl[,irq]]" hack in
its defconfig. The hack itself has been removed in 2008 and
this platform should be converted to using PATA platform host
driver (pata_platform) instead.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11141/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:55 +0000 (17:51 +0200)]
MIPS: maltaup_xpa_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts maltaup_xpa_defconfig to use libata PATA
drivers (tc86c001 IDE host driver has no corresponding libata
driver yet so it is not converted).
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11140/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:54 +0000 (17:51 +0200)]
MIPS: maltaup_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts maltaup_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11142/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:53 +0000 (17:51 +0200)]
MIPS: maltasmvp_eva_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts maltasmvp_eva_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11139/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:52 +0000 (17:51 +0200)]
MIPS: maltaaprp_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts maltaaprp_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: b.zolnierkie@samsung.com
Patchwork: https://patchwork.linux-mips.org/patch/11137/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:51 +0000 (17:51 +0200)]
MIPS: malta_qemu_32r6_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts malta_qemu_32r6_defconfig to use libata
PATA drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: b.zolnierkie@samsung.com
Patchwork: https://patchwork.linux-mips.org/patch/11138/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:50 +0000 (17:51 +0200)]
MIPS: malta_kvm_guest_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts malta_kvm_guest_defconfig to use libata
PATA drivers (tc86c001 IDE host driver has no corresponding
libata driver yet so it is not converted).
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Sanjay Lal <sanjayl@kymasys.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11136/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:49 +0000 (17:51 +0200)]
MIPS: malta_kvm_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts malta_kvm_defconfig to use libata PATA
drivers (tc86c001 IDE host driver has no corresponding libata
driver yet so it is not converted).
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Sanjay Lal <sanjayl@kymasys.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11135/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:48 +0000 (17:51 +0200)]
MIPS: malta_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts malta_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11134/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:47 +0000 (17:51 +0200)]
MIPS: lemote2f_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts lemote2f_defconfig to use libata PATA
drivers.
PS This platform uses CS5536 chipset which (due to historical
reasons) has basic support in AMD/nVidia PATA host driver and
full support in a newer CS5536 PATA one (pata_cs5536). Thus
most likely this platform should switch to using the latter
host driver.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11133/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:46 +0000 (17:51 +0200)]
MIPS: lasat_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts lasat_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Brian Murphy <brian@murphy.dk>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11132/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:45 +0000 (17:51 +0200)]
MIPS: fuloong2e_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts fuloong2e_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11131/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:44 +0000 (17:51 +0200)]
MIPS: e55_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts e55_defconfig to use libata PATA drivers.
PS This platform still uses "ide0=base[,ctl[,irq]]" hack in
its defconfig. The hack itself has been removed in 2008 and
this platform should be converted to using PATA platform host
driver (pata_platform) instead.
Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:43 +0000 (17:51 +0200)]
MIPS: capcella_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts capcella_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11129/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Bartlomiej Zolnierkiewicz [Mon, 14 Sep 2015 15:51:42 +0000 (17:51 +0200)]
MIPS: bigsur_defconfig: Convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts bigsur_defconfig to use libata PATA
drivers (tc86c001 IDE host driver has no corresponding libata
driver yet so it is not converted).
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11128/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 19:03:37 +0000 (12:03 -0700)]
MIPS: Extend hardware table walking support to MIPS64
Extend the existing support for Hardware Table Walking (HTW) to MIPS64
systems by supporting PMDs & setting the pointer size bit in PWSize,
then ceasing to blacklist HTW on MIPS64 systems.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11224/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:58:43 +0000 (11:58 -0700)]
MIPS: Malta: Register UP SMP ops if all else fails
If we fail to register any real SMP implementations, fall back to
registering the dummy UP implementation. Otherwise when we build an SMP
kernel & run it on a system where the SMP implementations fail to probe
(eg. QEMU) the kernel will perform a NULL dereference attempting to call
mp_ops->smp_setup() from plat_smp_setup().
Notably this fixes booting kernels with CPS SMP enabled on QEMU, which
doesn't currently implement the CM, CPC or GIC.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Rob Herring <robh@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11223/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:56:38 +0000 (11:56 -0700)]
MIPS: Malta: Setup RAM regions via DT
Move memory configuration to be performed via device tree for the Malta
board. This moves more Malta specific code to malta-dtshim.c, leaving
the rest of the mti-malta code a little more board-agnostic. This will
be useful to share more code between boards, with the device tree
providing the board specifics as intended.
Since we can't rely upon Malta boards running a bootloader capable of
handling devictrees & filling in the required information, a piece of
shim code (malta_dt_shim) is added to consume the (e)memsize variables
provided as part of the bootloader environment (or on the kernel command
line) then generate the DT memory node using the provided values.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: Kumar Gala <galak@codeaurora.org>
Cc: linux-kernel@vger.kernel.org
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Patchwork: https://patchwork.linux-mips.org/patch/11222/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:56:37 +0000 (11:56 -0700)]
MIPS: Malta: Remove fw_memblock_t abstraction
The fw_getmdesc function & fw_memblock_t abstraction is only used by
Malta, and so far as I can tell serves no purpose beyond making the code
less clear than it could be. Remove the useless level of abstraction.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11221/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:56:36 +0000 (11:56 -0700)]
MIPS: Malta: Split obj-y entries across lines
Split the obj-y entries to their own lines such that it's easier to see
what's going on when adding or removing entries.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11220/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:42:53 +0000 (11:42 -0700)]
MIPS: Allow RIXI for 32-bit kernels on MIPS64
Commit
a68d09a156b2 ("MIPS: Don't use RI/XI with 32-bit kernels on
64-bit CPUs") prevented use of RIXI on MIPS64 systems, stating that the
"TLB handlers cannot handle this case". What they actually couldn't
handle was cases where there were less fill bits in the Entry{Lo,Hi}
registers than bits used by software in PTEs. The handlers can now deal
with this case, so enable RIXI for MIPS32 kernels on MIPS64 systems.
Note that beyond the obvious benefits provided by having RIXI on such
systems, this is required for systems implementing MIPSr6 where RIXI
cannot be disabled.
This reverts commit
a68d09a156b2 ("MIPS: Don't use RI/XI with 32-bit
kernels on 64-bit CPUs").
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11219/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:42:52 +0000 (11:42 -0700)]
MIPS: tlbex: Avoid placing software PTE bits in Entry* PFN fields
Commit
748e787eb6de ("MIPS: Optimize TLB refill for RI/XI
configurations.") stopped explicitly clearing the bits used by software
in PTEs by making use of a rotate instruction that rotates them into the
fill bits of the Entry{Lo,Hi} register. This can only work if there are
actually enough fill bits in the register to cover the software
maintained bits, otherwise we end up writing those bits into the upper
bits of the PFN or PFNX field of the Entry{Lo,Hi} register.
Fix this by detecting the number of fill bits present in the
Entry{Lo,Hi} registers & explicitly clearing the software bits where
necessary.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11218/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:42:51 +0000 (11:42 -0700)]
MIPS: Tidy EntryLo bit definitions, add PFN
Tidy up the definition of the EntryLo RI & XI bits using BITS_PER_LONG
rather than #ifdef'ing on CONFIG_64BIT, and add a definition for the
offset to the PFN field for use by a later patch.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11217/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:42:50 +0000 (11:42 -0700)]
MIPS: tlbex: Share MIPS32 32 bit phys & MIPS64 64 bit phys code
The code in build_update_entries for 64 bit physical addresses on a
MIPS64 CPU and 32 bit physical addresses on a MIPS32 CPU is now
identical, with the exception of r4k bug workaround in the latter which
would simply not apply to the former. Remove the duplication and some
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11216/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:42:49 +0000 (11:42 -0700)]
MIPS: tlbex: Remove some RIXI redundancy
The cpu_has_rixi cases in build_update_entries are now identical to the
non-RIXI cases with the one exception of the r45k_bvahwbug case which is
hardcoded as never happening anyway & presumably was either missed from
the RIXI path or would never happen on a CPU with RIXI support. Remove
the redundant checks & duplication.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11215/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:42:48 +0000 (11:42 -0700)]
MIPS: tlbex: Stop open-coding build_convert_pte_to_entrylo
Make use of build_convert_pte_to_entrylo in the RIXI cases within
build_update_entries rather than open-coding it 4 times.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11214/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:24:20 +0000 (11:24 -0700)]
MIPS: Always use r4k_wait_irqoff for MIPSr6
Prior to release 6 of the MIPS architecture it has been implementation
dependent whether masked interrupts cause a wait instruction to return,
so the kernel has effectively had to maintain a whitelist of cores upon
which it is safe to use the r4k_wait_irqoff cpu_wait implementation.
With MIPSr6 this is no longer implementation dependent and
r4k_wait_irqoff can always be used.
Remove the existing I6400 case which will no longer ever be hit, and was
incorrect anyway since I6400 & r6 in general doesn't have the WII bit.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11210/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:12:18 +0000 (11:12 -0700)]
MIPS: CM, CPC: Ensure core-other GCRs reflect the correct core
Ensure the update to which core the core-other GCR regions reflect has
taken place before any core-other GCRs are accessed by placing a memory
barrier (sync instruction) between the write to the core-other registers
and any such GCR accesses.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11209/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:12:17 +0000 (11:12 -0700)]
MIPS: CM: make use of mips_cm_{lock,unlock}_other
Document that CPC core-other accesses must take place within the bounds
of the CM lock, and begin using the CM lock functions where we access
the GCRs of other cores. This is required because with CM3 the CPC began
using GCR_CL_OTHER instead of CPC_CL_OTHER.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11208/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:12:16 +0000 (11:12 -0700)]
MIPS: CM: Introduce core-other locking functions
Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the
existing CPC equivalents, in order to lock access from the current core
to another via the core-other GCR region. This hasn't been required in
the past but with CM3 the CPC starts using GCR_CL_OTHER rather than
CPC_CL_OTHER and this will be required for safety.
[ralf@linux-mips.org: Fix merge conflict.]
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11207/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:12:15 +0000 (11:12 -0700)]
MIPS: CM: Fix GCR_Cx_CONFIG PVPE mask
The PVPE (or PVP in >= CM3) field is 10 bits wide, but the mask
previously only covered the bottom 9 bits. Extend the mask to cover all
10 bits of the field.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11206/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:12:14 +0000 (11:12 -0700)]
MIPS: CPS: Warn if a core doesn't start
When debugging core bringup it is useful to see the state of the CPC
sequencer, so output that value if the core hasn't started within a
reasonable amount of time (1 second). This avoids simply appearing to
the user to hang if a secondary core fails to start.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: linux-kernel@vger.kernel.org
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11205/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:12:13 +0000 (11:12 -0700)]
MIPS: CPS: Skip Config1 presence check
The Config1 register is architecturally defined as required, and is thus
present in all systems which may make use of cps-vec.S. Skip the check
for its presence via the Config.M bit.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11204/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:12:12 +0000 (11:12 -0700)]
MIPS: CPS: Read CM GCR base from cop0
Rather than patching the start of mips_cps_core_entry to provide the
base address of the CM GCRs, simply read that base address from the cop0
CMGCRBase register, converting from the physical address to an uncached
virtual address.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: linux-kernel@vger.kernel.org
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11203/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:12:11 +0000 (11:12 -0700)]
MIPS: CPS: Early debug using an ns16550-compatible UART
Provide support for outputting early debug information, in the form of
various register values should an exception occur, during the early
bringup of secondary cores. This code requires an ns16550-compatible
UART accessible from the secondary core, and is written in assembly due
to the environment in which such early exceptions occur where way may
not have a stack, be coherent or even have initialised caches.
[ralf@linux-mips.org: Fix merge conflict.]
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11202/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Tue, 10 Nov 2015 17:06:37 +0000 (17:06 +0000)]
MIPS: Fix duplicate CP0_* definitions.
Remove the definition in locore.S and move a few of the other similar
definitions in asm/mipsregs.h too. CP0_INTCTL, CP0_SRSCTL, & CP0_SRSMAP
are unused so they're just dropped instead. CP0_DDATA_LO is left where
it is as I have patches to eliminate its use in locore.S and it
otherwise is unlikely to need to be used from assembly code.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11461/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:12:10 +0000 (11:12 -0700)]
MIPS: CPS: Set Status.KX on entry for MIPS64 kernels
If the kernel may make use of 64 bit addresses outside of the
compatibility address space then we need to set KX such that those
accesses can succeed. Do so for MIPS64 kernels.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11201/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 18:12:09 +0000 (11:12 -0700)]
MIPS: CPS: Set Status.BEV bit during early boot
Set the Status.BEV bit throughout the early startup of a secondary core
such that if an exception occurs the core branches to one of the
exception vector entries from cps-vec.S, rather than branching to
whatever is set in EBase.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11200/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:26:41 +0000 (10:26 -0700)]
MIPS: Always read full 64 bit CM error GCRs for CM3
CM3 has 64 bit GCR_ERROR_* registers, but the code in
mips_cm_error_report was previously only reading 32 bits of it in MIPS32
kernels. Fix by splitting the reads for CM2 & CM3, and making use of the
read64_ variants of the accessor function for CM3.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11189/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:26:40 +0000 (10:26 -0700)]
MIPS: Allow read64 GCR accessors to work on MIPS32 kernels
If we run a MIPS32 kernel on a system using CM3 we may still need to
access 64 bit GCRs, as will be done in later patches. Allow this by
having the read64_gcr_* accessor functions perform 2 x 32 bit reads on
those systems.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11188/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:26:39 +0000 (10:26 -0700)]
MIPS: Avoid buffer overrun in mips_cm_error_report
Commit
3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache
errors") added cases for decoding errors reported by CM3, but leaves the
buf variable which is printed as a string uninitialised for cause values
other than 1, 2 or 3. Fix by ensuring the buf variable is initialised to
an empty string in such cases.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11187/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:26:38 +0000 (10:26 -0700)]
MIPS: Don't read GCRs when a CM is not present
Commit
3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache
errors") leads to Malta boards unconditionally reading CM GCRs upon bus
errors, regardless of whether a CM is present. This is incorrect & will
lead to further exceptions. Fix by moving the GCR reads to after the
check for whether a CM is present.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11186/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:26:37 +0000 (10:26 -0700)]
MIPS: Clarify mips_cm_is64 documentation
The documentation for mips_cm_is64 implied that the width of the CM GCRs
would change depending upon the CPU, which is not true. Reword the
explanation to be clearer that the GCR width is purely dependent upon
the version of the CM.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11185/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:16:39 +0000 (10:16 -0700)]
MIPS: Allow 24Hz timer frequency
A boundary exists beyond which the timer frequency becomes high enough
that timer interrupts saturate the system and either cause it to slow to
a crawl or stop functioning entirely. Where that boundary lies depends
upon a number of factors such as the overhead of each interrupt and the
overall speed of the CPU, but correlates strongly with the clock
frequency at which the CPU runs. When running on emulators during
bringup or debug of a CPU that clock frequency is very low, which
results in the boundary at which the timer frequency becomes
unsustainable being very low. The current minimum of 48Hz pushes against
boundary in certain situations in current systems. Allow the kernel to
be configured for a 24Hz timer frequency in order to avoid problems on
such slow running systems.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11184/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:15:22 +0000 (10:15 -0700)]
MIPS: traps: tidy up ebase calculation
Rather than #ifdef on CONFIG_KVM_GUEST & redefine the guest kseg0 base
locally, make use of the CAC_BASE macro which has the correct value in
both cases.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11183/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thierry Reding [Mon, 5 Oct 2015 12:42:37 +0000 (14:42 +0200)]
MIPS: JZ4740: Remove unused linux/leds_pwm.h include
The board code never sets up a leds-pwm device, so including the header
is not necessary.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11262/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thierry Reding [Mon, 5 Oct 2015 11:31:17 +0000 (13:31 +0200)]
MIPS: JZ4740: Use PWM lookup table
Associate the PWM with the pwm-beeper device using a PWM lookup table.
This will eventually allow the legacy function calls to pwm_request() to
be removed from all consumer drivers.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11261/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 29 Sep 2015 10:19:48 +0000 (12:19 +0200)]
MIPS: Use ARCH_USE_BUILTIN_BSWAP.
ARCH_USE_BUILTIN_BSWAP will use __builtin_bswap16(), __builtin_bswap32()
and __builtin_bswap64() where available. This allows better instruction
scheduling. On pre-R2 processors it will result in 32 bit and 64 bit
swapping being performed in a call to a __bswapsi2() rsp. __bswapdi2()
functions, so we add these, too.
For a 4.2 kernel with GCC 4.9 this yields the following kernel sizes:
text data bss dec hex filename
3996071 155804 88992
4240867 40b5e3 vmlinux ip22 baseline
3985687 159900 88992
4234579 409d53 vmlinux ip22 + bswap patch
6913157 378552 251024
7542733 7317cd vmlinux ip27 baseline
6878581 378552 251024
7508157 7290bd vmlinux ip27 + bswap patch
5773777 268752 187424
6229953 5f0fc1 vmlinux malta baseline
5773401 268752 187424
6229577 5f0e49 vmlinux malta + bswap patch
Presumably the code size improvments yield better cache hit rate thus
better performance compensating for the extra function call but this
will still need to be benchmarked.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:10:56 +0000 (10:10 -0700)]
MIPS: Allow L2 prefetch to be configured via debugfs
When debugging or examining the performance of a system it can be useful
to examine the effect of L2 prefetching. Provide an optional debugfs
entry to allow a user to enable or disable L2 prefetching.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11182/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:10:55 +0000 (10:10 -0700)]
MIPS: Declare mips_debugfs_dir in a header
We have many extern declarations of mips_debugfs_dir through arch/mips/
in various C files. Unify them by declaring mips_debugfs_dir in a
header, including it in each affected C file & removing the duplicate
declarations.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: Joe Perches <joe@perches.com>
Cc: Jaedon Shin <jaedon.shin@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: James Cowgill <James.Cowgill@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11181/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:10:54 +0000 (10:10 -0700)]
MIPS: Enable L2 prefetching for CM >= 2.5
On systems with CM 2.5 & beyond there may be L2 prefetch units present
which are not enabled by default. Detect them, configuring & enabling
prefetching when available.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11180/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:10:53 +0000 (10:10 -0700)]
MIPS: Introduce API for enabling & disabling L2 prefetch
Introduce new functions in struct bcache_ops to enable & disable L2
cache prefetching, and to retrieve the current state of L2 prefetching.
This will be used in later patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11179/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 22 Sep 2015 17:07:41 +0000 (10:07 -0700)]
MIPS: Allow compact branch policy to be changed
When debugging it can be helpful to change the policy for compiler use
of MIPSr6 compact branches, in order to rule out or home in on their
involvement in bugs. Allow the GCC -mcompact-branches= flag to be set
via Kconfig under the "Kernel hacking" menu.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11178/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Andrzej Hajda [Mon, 21 Sep 2015 13:34:08 +0000 (15:34 +0200)]
MIPS: Remove invalid check
Unsigned values cannot be lesser than zero.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[ralf@linux-mips.org: Chris Dearman's original commit
9318c51acd9689505850152cc98277a6d6f2d752 ([MIPS] MIPS32/MIPS64 secondary
cache management) introduced these less than zero checks in 2.6.18.]
[1]: http://permalink.gmane.org/gmane.linux.kernel/
2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: linux-kernel@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Chris Dearman <chris.dearman@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11165/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Linus Torvalds [Sun, 25 Oct 2015 01:39:47 +0000 (10:39 +0900)]
Linux 4.3-rc7
Linus Torvalds [Fri, 23 Oct 2015 22:52:59 +0000 (07:52 +0900)]
Merge tag 'usb-4.3-rc7' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are three xhci driver fixes for reported issues for 4.3-rc7
All have been in linux-next for a while with no problems"
* tag 'usb-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Add spurious wakeup quirk for LynxPoint-LP controllers
xhci: handle no ping response error properly
xhci: don't finish a TD if we get a short transfer event mid TD
Linus Torvalds [Fri, 23 Oct 2015 22:52:09 +0000 (07:52 +0900)]
Merge tag 'tty-4.3-rc7' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are two fixes that resolve reported issues, one with the 8250
driver, and the other with the generic fbcon driver.
Both have been in linux-next for a while"
* tag 'tty-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fbcon: initialize blink interval before calling fb_set_par
Revert "serial: 8250_dma: don't bother DMA with small transfers"
Linus Torvalds [Fri, 23 Oct 2015 22:51:13 +0000 (07:51 +0900)]
Merge tag 'staging-4.3-rc7' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are four iio driver fixes for 4.3-rc7, fixing some reported
issues. All of these have been in linux-next for a while"
* tag 'staging-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: mxs-lradc: Fix temperature offset
iio: accel: sca3000: memory corruption in sca3000_read_first_n_hw_rb()
iio: st_accel: fix interrupt handling on LIS3LV02
iio: adc: twl4030: Fix ADC[3:6] readings
Linus Torvalds [Fri, 23 Oct 2015 22:28:05 +0000 (07:28 +0900)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma
Pull infiniband fixes from Doug Ledford:
"It's late in the game, I know, but these fixes seemed important enough
to warrant a late pull request. They all involve oopses or use after
frees or corruptions.
Six serious fixes:
- Hold the mutex around the find and corresponding update of our gid
- The ifa list is rcu protected, copy its contents under rcu to avoid
using a freed structure
- On error, netdev might be null, so check it before trying to
release it
- On init, if workqueue alloc fails, fail init
- The new demux patches exposed a bug in mlx5 and ipath drivers, we
need to use the payload P_Key to determine the P_Key the packet
arrived on because the hardware doesn't tell us the truth
- Due to a couple convoluted error flows, it is possible for the CM
to trigger a use_after_free and a double_free of rb nodes. Add two
checks to prevent that. This code has worked for 10+ years. It is
likely that some of the recent changes have caused this issue to
surface. The current patch will protect us from nasty events for
now while we track down why this is just now showing up"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/cm: Fix rb-tree duplicate free and use-after-free
IB/cma: Use inner P_Key to determine netdev
IB/ucma: check workqueue allocation before usage
IB/cma: Potential NULL dereference in cma_id_from_event
IB/core: Fix use after free of ifa
IB/core: Fix memory corruption in ib_cache_gid_set_default_gid
Linus Torvalds [Fri, 23 Oct 2015 22:23:52 +0000 (07:23 +0900)]
Merge tag 'dm-4.3-fixes-4' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Three stable fixes (two in btree code used by DM thinp and one to
properly store flags in DM cache metadata's superblock)"
* tag 'dm-4.3-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: the CLEAN_SHUTDOWN flag was not being set
dm btree: fix leak of bufio-backed block in btree_split_beneath error path
dm btree remove: fix a bug when rebalancing nodes after removal
Linus Torvalds [Fri, 23 Oct 2015 22:20:57 +0000 (07:20 +0900)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"A final set of fixes for 4.3.
It is (again) bigger than I would have liked, but it's all been
through the testing mill and has been carefully reviewed by multiple
parties. Each fix is either a regression fix for this cycle, or is
marked stable. You can scold me at KS. The pull request contains:
- Three simple fixes for NVMe, fixing regressions since 4.3. From
Arnd, Christoph, and Keith.
- A single xen-blkfront fix from Cathy, fixing a NULL dereference if
an error is returned through the staste change callback.
- Fixup for some bad/sloppy code in nbd that got introduced earlier
in this cycle. From Markus Pargmann.
- A blk-mq tagset use-after-free fix from Junichi.
- A backing device lifetime fix from Tejun, fixing a crash.
- And finally, a set of regression/stable fixes for cgroup writeback
from Tejun"
* 'for-linus' of git://git.kernel.dk/linux-block:
writeback: remove broken rbtree_postorder_for_each_entry_safe() usage in cgwb_bdi_destroy()
NVMe: Fix memory leak on retried commands
block: don't release bdi while request_queue has live references
nvme: use an integer value to Linux errno values
blk-mq: fix use-after-free in blk_mq_free_tag_set()
nvme: fix 32-bit build warning
writeback: fix incorrect calculation of available memory for memcg domains
writeback: memcg dirty_throttle_control should be initialized with wb->memcg_completions
writeback: bdi_writeback iteration must not skip dying ones
writeback: fix bdi_writeback iteration in wakeup_dirtytime_writeback()
writeback: laptop_mode_timer_fn() needs rcu_read_lock() around bdi_writeback iteration
nbd: Add locking for tasks
xen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing)
Linus Torvalds [Fri, 23 Oct 2015 22:19:33 +0000 (07:19 +0900)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"Two fixes.
One is a stopgap to prevent a stack blowout when users have a deep
chain of image clones. (We'll rewrite this code to be non-recursive
for the next window, but in the meantime this is a simple fix that
avoids a crash.)
The second fixes a refcount underflow"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: prevent kernel stack blow up on rbd map
rbd: don't leak parent_spec in rbd_dev_probe_parent()
Linus Torvalds [Fri, 23 Oct 2015 22:17:58 +0000 (07:17 +0900)]
Merge branch 'for-linus-4.3' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"I have two more small fixes this week:
Qu's fix avoids unneeded COW during fallocate, and Christian found a
memory leak in the error handling of an earlier fix"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix possible leak in btrfs_ioctl_balance()
btrfs: Avoid truncate tailing page if fallocate range doesn't exceed inode size
Joe Thornber [Thu, 22 Oct 2015 17:10:55 +0000 (18:10 +0100)]
dm cache: the CLEAN_SHUTDOWN flag was not being set
If the CLEAN_SHUTDOWN flag is not set when a cache is loaded then all cache
blocks are marked as dirty and a full writeback occurs.
__commit_transaction() is responsible for setting/clearing
CLEAN_SHUTDOWN (based the flags_mutator that is passed in).
Fix this issue, of the cache's on-disk flags being wrong, by making sure
__commit_transaction() does not reset the flags after the mutator has
altered the flags in preparation for them being serialized to disk.
before:
sb_flags = mutator(le32_to_cpu(disk_super->flags));
disk_super->flags = cpu_to_le32(sb_flags);
disk_super->flags = cpu_to_le32(cmd->flags);
after:
disk_super->flags = cpu_to_le32(cmd->flags);
sb_flags = mutator(le32_to_cpu(disk_super->flags));
disk_super->flags = cpu_to_le32(sb_flags);
Reported-by: Bogdan Vasiliev <bogdan.vasiliev@gmail.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Mike Snitzer [Thu, 22 Oct 2015 14:56:40 +0000 (10:56 -0400)]
dm btree: fix leak of bufio-backed block in btree_split_beneath error path
btree_split_beneath()'s error path had an outstanding FIXME that speaks
directly to the potential for _not_ cleaning up a previously allocated
bufio-backed block.
Fix this by releasing the previously allocated bufio block using
unlock_block().
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Cc: stable@vger.kernel.org
Joe Thornber [Wed, 21 Oct 2015 17:36:49 +0000 (18:36 +0100)]
dm btree remove: fix a bug when rebalancing nodes after removal
Commit
4c7e309340ff ("dm btree remove: fix bug in redistribute3") wasn't
a complete fix for redistribute3().
The redistribute3 function takes 3 btree nodes and shares out the entries
evenly between them. If the three nodes in total contained
(MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting
rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in
the center.
Fix this issue by being more careful about calculating the target number
of entries for the left and right nodes.
Unit tested in userspace using this program:
https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.c
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Ilya Dryomov [Sun, 11 Oct 2015 17:38:00 +0000 (19:38 +0200)]
rbd: prevent kernel stack blow up on rbd map
Mapping an image with a long parent chain (e.g. image foo, whose parent
is bar, whose parent is baz, etc) currently leads to a kernel stack
overflow, due to the following recursion in the reply path:
rbd_osd_req_callback()
rbd_obj_request_complete()
rbd_img_obj_callback()
rbd_img_parent_read_callback()
rbd_obj_request_complete()
...
Limit the parent chain to 16 images, which is ~5K worth of stack. When
the above recursion is eliminated, this limit can be lifted.
Fixes: http://tracker.ceph.com/issues/12538
Cc: stable@vger.kernel.org # 3.10+, needs backporting for < 4.2
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Ilya Dryomov [Sun, 11 Oct 2015 17:38:00 +0000 (19:38 +0200)]
rbd: don't leak parent_spec in rbd_dev_probe_parent()
Currently we leak parent_spec and trigger a "parent reference
underflow" warning if rbd_dev_create() in rbd_dev_probe_parent() fails.
The problem is we take the !parent out_err branch and that only drops
refcounts; parent_spec that would've been freed had we called
rbd_dev_unparent() remains and triggers rbd_warn() in
rbd_dev_parent_put() - at that point we have parent_spec != NULL and
parent_ref == 0, so counter ends up being -1 after the decrement.
Redo rbd_dev_probe_parent() to fix this.
Cc: stable@vger.kernel.org # 3.10+, needs backporting for < 4.2
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Linus Torvalds [Fri, 23 Oct 2015 13:34:32 +0000 (22:34 +0900)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: two KASAN fixes, two EFI boot fixes, two boot-delay
optimization fixes, and a fix for a IRQ handling hang observed on
virtual platforms"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm, kasan: Silence KASAN warnings in get_wchan()
compiler, atomics, kasan: Provide READ_ONCE_NOCHECK()
x86, kasan: Fix build failure on KASAN=y && KMEMCHECK=y kernels
x86/smpboot: Fix CPU #1 boot timeout
x86/smpboot: Fix cpu_init_udelay=10000 corner case boot parameter misbehavior
x86/ioapic: Disable interrupts when re-routing legacy IRQs
x86/setup: Extend low identity map to cover whole kernel range
x86/efi: Fix multiple GOP device support
Linus Torvalds [Fri, 23 Oct 2015 13:31:39 +0000 (22:31 +0900)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes all around the map: an instrumentation fix, a nohz
usability fix, a lockdep annotation fix and two task group scheduling
fixes"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Add missing lockdep_unpin() annotations
sched/deadline: Fix migration of SCHED_DEADLINE tasks
nohz: Revert "nohz: Set isolcpus when nohz_full is set"
sched/fair: Update task group's load_avg after task migration
sched/fair: Fix overly small weight for interactive group entities
sched, tracing: Stop/start critical timings around the idle=poll idle loop
Linus Torvalds [Fri, 23 Oct 2015 13:10:51 +0000 (22:10 +0900)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"9 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
ocfs2/dlm: unlock lockres spinlock before dlm_lockres_put
fault-inject: fix inverted interval/probability values in printk
lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y
mm: make sendfile(2) killable
thp: use is_zero_pfn() only after pte_present() check
mailmap: update Javier Martinez Canillas' email
MAINTAINERS: add Sergey as zsmalloc reviewer
mm: cma: fix incorrect type conversion for size during dma allocation
kmod: don't run async usermode helper as a child of kworker thread
Peter Zijlstra [Fri, 23 Oct 2015 09:50:08 +0000 (11:50 +0200)]
sched/core: Add missing lockdep_unpin() annotations
Luca and Wanpeng reported two missing annotations that led to
false lockdep complaints. Add the missing annotations.
Reported-by: Luca Abeni <luca.abeni@unitn.it>
Reported-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
cbce1a686700 ("sched,lockdep: Employ lock pinning")
Link: http://lkml.kernel.org/r/20151023095008.GY17308@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Fri, 23 Oct 2015 09:49:51 +0000 (18:49 +0900)]
Merge tag 'powerpc-4.3-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on
POWER8" from Paul
- Handle irq_happened flag correctly in off-line loop from Paul
- Validate rtas.entry before calling enter_rtas() from Vasant
* tag 'powerpc-4.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas: Validate rtas.entry before calling enter_rtas()
powerpc/powernv: Handle irq_happened flag correctly in off-line loop
powerpc: Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8"
Linus Torvalds [Fri, 23 Oct 2015 09:38:00 +0000 (18:38 +0900)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for incorrect device nodes in
various ways, on on imx, berlin, exynos, ux500, uniphier, omap and
meson.
Chen-Yu Tsai now co-maintains mach-sunxi (Allwinner).
Other bug fixes include
- a partial revert of a broken tegra gpio patch
- irq affinity for arm ccn
- suspend on one Armada 385 machine
- enable ZONE_DMA to avoid an OMAP crash for over 2GB RAM
- turning on a regulator on beagleboard-x15 for HDMI
- making the omap gpmc debug code visible
- setup of orion network switch
- a rare build regression for pxa"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init
thermal: exynos: Fix register read in TMU
ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
ARM: tegra: Comment out gpio-ranges properties
ARM: dts: uniphier: fix IRQ number for devices on PH1-LD6b ref board
drivers/perf: arm_pmu: avoid CPU device_node reference leak
bus: arm-ccn: Fix irq affinity setting on CPU migration
bus: arm-ccn: Handle correctly no-more-cpus case
ARM: mvebu: correct a385-db-ap compatible string
ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers
MAINTAINERS: Update Allwinner entry and add new maintainer
ARM: ux500: modify initial levelshifter status
ARM: pxa: fix pxa3xx DFI lockup hack
Documentation: ARM: List new omap MMC requirements
memory: omap-gpmc: dump "before" state before first modification
memory: omap-gpmc: Fix unselectable debug option for GPMC
ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on
ARM: dts: Fix audio card detection on Peach boards
ARM: EXYNOS: Fix double of_node_put() when parsing child power domains
ARM: orion: Fix DSA platform device after mvmdio conversion
...
Linus Torvalds [Fri, 23 Oct 2015 09:32:29 +0000 (18:32 +0900)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM bugfixes from Paolo Bonzini:
"Bug fixes for ARM, mostly 4.3 regressions related to virtual interrupt
controller changes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
arm/arm64: KVM: Fix disabled distributor operation
arm/arm64: KVM: Clear map->active on pend/active clear
arm/arm64: KVM: Fix arch timer behavior for disabled interrupts
KVM: arm: use GIC support unconditionally
KVM: arm/arm64: Fix memory leak if timer initialization fails
KVM: arm/arm64: Do not inject spurious interrupts
Linus Torvalds [Fri, 23 Oct 2015 09:24:33 +0000 (18:24 +0900)]
Merge tag 'trace-fixes-v4.3-rc6' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Running tests on other changes, the system locked up due to lots of
warnings. It was caused by the stack tracer triggering a warning
about using rcu_dereference() when RCU was not watching. This can
happen due to the fact that the stack tracer uses the function tracer
to check each function, and there are functions that may be called and
traced when RCU stopped watching. Namely when a function is called
just before going idle or to userspace and after RCU stopped watching
that current CPU.
The first patch makes sure that RCU is watching when the stack tracer
uses RCU. The second patch is to make sure that the stack tracer does
not get called by functions in NMI, as it's not NMI safe"
* tag 'trace-fixes-v4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not allow stack_tracer to record stack in NMI
tracing: Have stack tracer force RCU to be watching
Linus Torvalds [Fri, 23 Oct 2015 09:21:55 +0000 (18:21 +0900)]
Merge tag 'sound-4.3-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There is nothing to worry you much, only a few small & stable patches
are found for usual stuff, HD-audio (a Lenovo laptop quirk, a fix for
minor error handling) and ASoC (trivial fixes for RT298 and WM
codecs).
The only remaining major change is the fix for ASoC SX_TLV control
that was overseen during refactoring, but the fix itself is trivial
and safe"
* tag 'sound-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: wm8962: mark cache_dirty flag after software reset in pm_resume
ASoC: rt298: fix wrong setting of gpio2_en
ASoC: wm8904: Correct number of EQ registers
ALSA: hda - Fix deadlock at error in building PCM
ASoC: Add info callback for SX_TLV controls
ASoC: rt298: correct index default value
ALSA: hda - Fix inverted internal mic on Lenovo G50-80
ALSA: hdac: Explicitly add io.h
Linus Torvalds [Fri, 23 Oct 2015 09:15:20 +0000 (18:15 +0900)]
Merge tag 'media/v4.3-4' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some regression fixes and potential security issues:
- netup_unidvb: fix potential crash when spi is NULL
- rtl28xxu: fix control message flaws
- m88ds3103: fix a regression on Kernel 4.2
- c8sectpfe: fix some issues on this new driver
- v4l2-flash-led-class: fix a Kbuild dependency
- si2157 and si2158: check for array boundary when uploading firmware
files
- horus3a and lnbh25: fix some building troubles when some options
aren't selected
- ir-hix5hd2: drop the use of IRQF_NO_SUSPEND"
* tag 'media/v4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] m88ds3103: use own reg update_bits() implementation
[media] rtl28xxu: fix control message flaws
[media] v4l2-flash-led-class: Add missing VIDEO_V4L2 Kconfig dependency
[media] netup_unidvb: fix potential crash when spi is NULL
[media] si2168: Bounds check firmware
[media] si2157: Bounds check firmware
[media] ir-hix5hd2: drop the use of IRQF_NO_SUSPEND
[media] c8sectpfe: fix return of garbage
[media] c8sectpfe: fix ininitialized error return on firmware load failure
[media] lnbh25: Fix lnbh25_attach() function return type
[media] horus3a: Fix horus3a_attach() function parameters
Linus Torvalds [Fri, 23 Oct 2015 09:08:22 +0000 (18:08 +0900)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"I've been a bit slow gathering these:
- drm/mst: one mutex leak in a fail path
- radeon: two oops fixes, one dpm fix
- i915: one messy set of fixes, where we revert the original fix, and
pull back the proper set of fixes from -next on top.
- nouveau: one fix for an illegal buffer placement.
Doesn't look too bad, hopefully shouldn't be too much more"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/gem: return only valid domain when there's only one
drm: fix mutex leak in drm_dp_get_mst_branch_device
drm/amdgpu: add missing dpm check for KV dpm late init
drm/amdgpu/dpm: don't add pwm attributes if DPM is disabled
drm/radeon/dpm: don't add pwm attributes if DPM is disabled
drm/i915: Add primary plane to mask if it's visible
drm/i915: Move sprite/cursor plane disable to intel_sanitize_crtc()
drm/i915: Assign hwmode after encoder state readout
Revert "drm/i915: Add primary plane to mask if it's visible"
drm/i915: Deny wrapping an userptr into a framebuffer
drm/i915: Enable DPLL VGA mode before P1/P2 divider write
drm/i915: Restore lost DPLL register write on gen2-4
drm/i915: Flush pipecontrol post-sync writes
drm/i915: Fix kerneldoc for i915_gem_shrink_all
Joseph Qi [Thu, 22 Oct 2015 20:32:29 +0000 (13:32 -0700)]
ocfs2/dlm: unlock lockres spinlock before dlm_lockres_put
dlm_lockres_put will call dlm_lockres_release if it is the last
reference, and then it may call dlm_print_one_lock_resource and
take lockres spinlock.
So unlock lockres spinlock before dlm_lockres_put to avoid deadlock.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Westphal [Thu, 22 Oct 2015 20:32:27 +0000 (13:32 -0700)]
fault-inject: fix inverted interval/probability values in printk
interval displays the probability and vice versa.
Fixes:
6adc4a22f20bb ("fault-inject: add ratelimit option")
Acked-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Thu, 22 Oct 2015 20:32:24 +0000 (13:32 -0700)]
lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y
When the kernel compiled with KASAN=y, GCC adds redzones for each
variable on stack. This enlarges function's stack frame and causes:
'warning: the frame size of X bytes is larger than Y bytes'
The worst case I've seen for now is following:
../net/wireless/nl80211.c: In function `nl80211_send_wiphy':
../net/wireless/nl80211.c:1731:1: warning: the frame size of 5448 bytes is larger than 2048 bytes [-Wframe-larger-than=]
That kind of warning becomes useless with KASAN=y. It doesn't
necessarily indicate that there is some problem in the code, thus we
should turn it off.
(The KASAN=y stack size in increased from 16k to 32k for this reason)
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Abylay Ospan <aospan@netup.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Thu, 22 Oct 2015 20:32:21 +0000 (13:32 -0700)]
mm: make sendfile(2) killable
Currently a simple program below issues a sendfile(2) system call which
takes about 62 days to complete in my test KVM instance.
int fd;
off_t off = 0;
fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644);
ftruncate(fd, 2);
lseek(fd, 0, SEEK_END);
sendfile(fd, fd, &off, 0xfffffff);
Now you should not ask kernel to do a stupid stuff like copying 256MB in
2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin
should have a way to stop you.
We actually do have a check for fatal_signal_pending() in
generic_perform_write() which triggers in this path however because we
always succeed in writing something before the check is done, we return
value > 0 from generic_perform_write() and thus the information about
signal gets lost.
Fix the problem by doing the signal check before writing anything. That
way generic_perform_write() returns -EINTR, the error gets propagated up
and the sendfile loop terminates early.
Signed-off-by: Jan Kara <jack@suse.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Thu, 22 Oct 2015 20:32:19 +0000 (13:32 -0700)]
thp: use is_zero_pfn() only after pte_present() check
Use is_zero_pfn() on pteval only after pte_present() check on pteval
(It might be better idea to introduce is_zero_pte() which checks
pte_present() first).
Otherwise when working on a swap or migration entry and if pte_pfn's
result is equal to zero_pfn by chance, we lose user's data in
__collapse_huge_page_copy(). So if you're unlucky, the application
segfaults and finally you could see below message on exit:
BUG: Bad rss-counter state mm:
ffff88007f099300 idx:2 val:3
Fixes:
ca0984caa823 ("mm: incorporate zero pages into transparent huge pages")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [4.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Javier Martinez Canillas [Thu, 22 Oct 2015 20:32:16 +0000 (13:32 -0700)]
mailmap: update Javier Martinez Canillas' email
The get_maintainer script still reports my old Collabora email based on
old commits but that address no longer exist so update mailmap to report
my current email and avoid people sending to the old address.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sergey Senozhatsky [Thu, 22 Oct 2015 20:32:13 +0000 (13:32 -0700)]
MAINTAINERS: add Sergey as zsmalloc reviewer
Nominate myself as a zsmalloc reviewer.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rohit Vaswani [Thu, 22 Oct 2015 20:32:11 +0000 (13:32 -0700)]
mm: cma: fix incorrect type conversion for size during dma allocation
This was found during userspace fuzzing test when a large size dma cma
allocation is made by driver(like ion) through userspace.
show_stack+0x10/0x1c
dump_stack+0x74/0xc8
kasan_report_error+0x2b0/0x408
kasan_report+0x34/0x40
__asan_storeN+0x15c/0x168
memset+0x20/0x44
__dma_alloc_coherent+0x114/0x18c
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Thu, 22 Oct 2015 20:32:08 +0000 (13:32 -0700)]
kmod: don't run async usermode helper as a child of kworker thread
call_usermodehelper_exec_sync() does fork() + wait() with "unignored"
SIGCHLD. What we have missed is that this worker thread can have other
children previously forked by call_usermodehelper_exec_work() without
UMH_WAIT_PROC. If such a child exits in between it becomes a zombie
because auto-reaping only works if SIGCHLD is ignored, and nobody can
reap it (unless/until this worker thread exits too).
Change the !UMH_WAIT_PROC case to use CLONE_PARENT.
Note: this is only first step. All PF_KTHREAD tasks, even created by
kernel_thread() should have ->parent == kthreadd by default.
Fixes:
bb304a5c6fc63d8506c ("kmod: handle UMH_WAIT_PROC from system unbound workqueue")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Fri, 23 Oct 2015 04:56:56 +0000 (06:56 +0200)]
Merge tag 'asoc-fix-v4.3-rc6' of git://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.3
A bunch of driver fixes plus one core fix which fixes problems with
misreporting values from _SX controls following a recent refactoring.
This had gone unnoticed as such controls are quite rare.
Mark Brown [Thu, 22 Oct 2015 23:44:14 +0000 (08:44 +0900)]
Merge remote-tracking branches 'asoc/fix/rt298', 'asoc/fix/sx', 'asoc/fix/wm8904' and 'asoc/fix/wm8962' into asoc-linus
Mark Brown [Thu, 22 Oct 2015 23:44:13 +0000 (08:44 +0900)]
Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linus
Antti Palosaari [Sat, 3 Oct 2015 21:35:14 +0000 (18:35 -0300)]
[media] m88ds3103: use own reg update_bits() implementation
Device stopped to tuning some channels after regmap conversion.
Reason is that regmap_update_bits() works a bit differently for
partially volatile registers than old homemade routine. Return
back to old routine in order to fix issue.
Fixes:
478932b16052f5ded74685d096ae920cd17d6424
Cc: <stable@kernel.org> # 4.2+
Reported-by: Mark Clarkstone <hello@markclarkstone.co.uk>
Tested-by: Mark Clarkstone <hello@markclarkstone.co.uk>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Tue, 6 Oct 2015 03:22:23 +0000 (00:22 -0300)]
[media] rtl28xxu: fix control message flaws
Add lock to prevent concurrent access for control message as control
message function uses shared buffer. Without the lock there may be
remote control polling which messes the buffer causing IO errors.
Increase buffer size and add check for maximum supported message
length.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=103391
Fixes:
c56222a6b25c ("[media] rtl28xxu: move usb buffers to state")
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Antti Palosaari <crope@iki.fi>
Jacek Anaszewski [Fri, 2 Oct 2015 09:19:15 +0000 (06:19 -0300)]
[media] v4l2-flash-led-class: Add missing VIDEO_V4L2 Kconfig dependency
Fixes the following randconfig problem:
drivers/built-in.o: In function `v4l2_flash_release':
(.text+0x12204f): undefined reference to `v4l2_async_unregister_subdev'
drivers/built-in.o: In function `v4l2_flash_release':
(.text+0x122057): undefined reference to `v4l2_ctrl_handler_free'
drivers/built-in.o: In function `v4l2_flash_close':
v4l2-flash-led-class.c:(.text+0x12208f): undefined reference to `v4l2_fh_is_singular'
v4l2-flash-led-class.c:(.text+0x1220c8): undefined reference to `__v4l2_ctrl_s_ctrl'
drivers/built-in.o: In function `v4l2_flash_open':
v4l2-flash-led-class.c:(.text+0x12227f): undefined reference to `v4l2_fh_is_singular'
drivers/built-in.o: In function `v4l2_flash_init_controls':
v4l2-flash-led-class.c:(.text+0x12274e): undefined reference to `v4l2_ctrl_handler_init_class'
v4l2-flash-led-class.c:(.text+0x122797): undefined reference to `v4l2_ctrl_new_std_menu'
v4l2-flash-led-class.c:(.text+0x1227e0): undefined reference to `v4l2_ctrl_new_std'
v4l2-flash-led-class.c:(.text+0x122826): undefined reference to `v4l2_ctrl_handler_setup'
v4l2-flash-led-class.c:(.text+0x122839): undefined reference to `v4l2_ctrl_handler_free'
drivers/built-in.o: In function `v4l2_flash_init':
(.text+0x1228e2): undefined reference to `v4l2_subdev_init'
drivers/built-in.o: In function `v4l2_flash_init':
(.text+0x12293b): undefined reference to `v4l2_async_register_subdev'
drivers/built-in.o: In function `v4l2_flash_init':
(.text+0x122949): undefined reference to `v4l2_ctrl_handler_free'
drivers/built-in.o:(.rodata+0x20ef8): undefined reference to `v4l2_subdev_queryctrl'
drivers/built-in.o:(.rodata+0x20f10): undefined reference to `v4l2_subdev_querymenu'
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Abylay Ospan [Fri, 25 Sep 2015 07:56:21 +0000 (04:56 -0300)]
[media] netup_unidvb: fix potential crash when spi is NULL
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Laura Abbott [Wed, 30 Sep 2015 00:10:09 +0000 (21:10 -0300)]
[media] si2168: Bounds check firmware
When reading the firmware and sending commands, the length must
be bounds checked to avoid overrunning the size of the command
buffer and smashing the stack if the firmware is not in the expected
format:
si2168 11-0064: found a 'Silicon Labs Si2168-B40'
si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
si2168 11-0064: firmware download failed -95
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in:
ffffffffa085708f
Add the proper check.
Cc: stable@kernel.org
Reported-by: Stuart Auchterlonie <sauchter@redhat.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Laura Abbott [Wed, 30 Sep 2015 00:10:10 +0000 (21:10 -0300)]
[media] si2157: Bounds check firmware
When reading the firmware and sending commands, the length
must be bounds checked to avoid overrunning the size of the command
buffer and smashing the stack if the firmware is not in the
expected format. Add the proper check.
Cc: stable@kernel.org
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>