OSDN Git Service
Linus Torvalds [Wed, 23 Dec 2015 18:28:39 +0000 (10:28 -0800)]
Merge tag 'sound-4.4-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This shouldn't be a nightmare before Christmas: just a handful small
device-specific fixes for various ASoC and HD-audio drivers. Most of
them are stable fixes"
* tag 'sound-4.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Fix silent headphone output on MacPro 4,1 (v2)
ASoC: fsl_sai: fix no frame clk in master mode
ALSA: hda - Set SKL+ hda controller power at freeze() and thaw()
ASoC: sgtl5000: fix VAG power up timing
ASoC: rockchip: spdif: Set transmit data level to 16 samples
ASoC: wm8974: set cache type for regmap
ASoC: es8328: Fix shifts for mixer switches
ASoC: davinci-mcasp: Fix XDATA check in mcasp_start_tx
ASoC: es8328: Fix deemphasis values
Linus Torvalds [Wed, 23 Dec 2015 18:22:16 +0000 (10:22 -0800)]
Merge tag 'drm-intel-fixes-2015-12-23' of git://anongit.freedesktop.org/drm-intel
Pull i915 drm fixes from Jani Nikula:
"Here's a batch of i915 fixes all around. It may be slightly bigger
than one would hope for at this stage, but they've all been through
testing in our -next before being picked up for v4.4. Also, I missed
Dave's fixes pull earlier today just because I wanted an extra testing
round on this. So I'm fairly confident.
Wishing you all the things it is customary to wish this time of the
year"
* tag 'drm-intel-fixes-2015-12-23' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Correct max delay for HDMI hotplug live status checking
drm/i915: mdelay(10) considered harmful
drm/i915: Kill intel_crtc->cursor_bo
drm/i915: Workaround CHV pipe C cursor fail
drm/i915: Only spin whilst waiting on the current request
drm/i915: Limit the busy wait on requests to 5us not 10ms!
drm/i915: Break busywaiting for requests on pending signals
drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2)
drm/i915: Set the map-and-fenceable flag for preallocated objects
drm/i915: Drop the broken cursor base==0 special casing
Linus Torvalds [Wed, 23 Dec 2015 18:11:12 +0000 (10:11 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Not much happening, should have dequeued this lot earlier.
One amdgpu, one nouveau and one exynos fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/exynos: atomic check only enabled crtc states
drm/nouveau/bios/fan: hardcode the fan mode to linear
drm/amdgpu: fix user fence handling
Takashi Iwai [Wed, 23 Dec 2015 07:30:28 +0000 (08:30 +0100)]
Merge tag 'asoc-fix-v4.4-rc6' of git://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.4
A collection of small driver specific fixes here, nothing that'll affect
users who don't have the devices concerned. At least the wm8974 bug
indicates that there's not too many users of some of these devices.
Mark Brown [Wed, 23 Dec 2015 00:23:27 +0000 (00:23 +0000)]
Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328', 'asoc/fix/fsl-sai', 'asoc/fix/rockchip', 'asoc/fix/sgtl5000' and 'asoc/fix/wm8974' into asoc-linus
Linus Torvalds [Wed, 23 Dec 2015 00:00:25 +0000 (16:00 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"Three small fixes for 4.4 final. Specifically:
- The segment issue fix from Junichi, where the old IO path does a
bio limit split before potentially bouncing the pages. We need to
do that in the right order, to ensure that limitations are met.
- A NVMe surprise removal IO hang fix from Keith.
- A use-after-free in null_blk, introduced by a previous patch in
this series. From Mike Krinkin"
* 'for-linus' of git://git.kernel.dk/linux-block:
null_blk: fix use-after-free error
block: ensure to split after potentially bouncing a bio
NVMe: IO ending fixes on surprise removal
Linus Torvalds [Tue, 22 Dec 2015 23:52:32 +0000 (15:52 -0800)]
Merge tag 'nfsd-4.4-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fix from Bruce Fields:
"Just one fix for a NFSv4 callback bug introduced in 4.4"
* tag 'nfsd-4.4-1' of git://linux-nfs.org/~bfields/linux:
nfsd: don't hold ls_mutex across a layout recall
Linus Torvalds [Tue, 22 Dec 2015 23:47:39 +0000 (15:47 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- A series of fixes to the MTRR emulation, tested in the BZ by several
users so they should be safe this late
- A fix for a division by zero
- Two very simple ARM and PPC fixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Reload pit counters for all channels when restoring state
KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUID
KVM: MTRR: observe maxphyaddr from guest CPUID, not host
KVM: MTRR: fix fixed MTRR segment look up
KVM: VMX: Fix host initiated access to guest MSR_TSC_AUX
KVM: arm/arm64: vgic: Fix kvm_vgic_map_is_active's dist check
kvm: x86: move tracepoints outside extended quiescent state
KVM: PPC: Book3S HV: Prohibit setting illegal transaction state in MSR
Linus Torvalds [Tue, 22 Dec 2015 23:43:18 +0000 (15:43 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Two late bug fixes for kernel 4.4.
Merry Christmas"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dis: Fix handling of format specifiers
s390/zcrypt: Fix AP queue handling if queue is full
Linus Torvalds [Tue, 22 Dec 2015 23:37:19 +0000 (15:37 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio fix from Michael Tsirkin:
"This includes a single fix for virtio ccw error handling"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio/s390: handle error values in irb
Mickaël Salaün [Tue, 22 Dec 2015 20:44:01 +0000 (21:44 +0100)]
um: Fix pointer cast
Fix a pointer cast typo introduced in v4.4-rc5 especially visible for
the i386 subarchitecture where it results in a kernel crash.
[ Also removed pointless cast as per Al Viro - Linus ]
Fixes:
8090bfd2bb9a ("um: Fix fpstate handling")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Jeff Dike <jdike@addtoit.com>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Krinkin [Tue, 15 Dec 2015 09:56:40 +0000 (12:56 +0300)]
null_blk: fix use-after-free error
blk_end_request_all may free request, so we need to save
request_queue pointer before blk_end_request_all call.
The problem was introduced in commit
cf8ecc5a8455266f8d51
("null_blk: guarantee device restart in all irq modes")
and causes general protection fault with slab poisoning
enabled.
Fixes:
cf8ecc5a8455266f8d51 ("null_blk: guarantee device
restart in all irq modes")
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Junichi Nomura [Tue, 22 Dec 2015 17:23:44 +0000 (10:23 -0700)]
block: ensure to split after potentially bouncing a bio
blk_queue_bio() does split then bounce, which makes the segment
counting based on pages before bouncing and could go wrong. Move
the split to after bouncing, like we do for blk-mq, and the we
fix the issue of having the bio count for segments be wrong.
Fixes:
54efd50bfd87 ("block: make generic_make_request handle arbitrarily sized bios")
Cc: stable@vger.kernel.org
Tested-by: Artem S. Tashkinov <t.artem@lycos.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Keith Busch [Fri, 11 Dec 2015 20:14:28 +0000 (13:14 -0700)]
NVMe: IO ending fixes on surprise removal
This patch fixes a lost request discovered during IO + hot removal.
The driver's pci removal deletes gendisks prior to shutting down the
controller to allow dirty data to sync. Dirty data can not be synced on
a surprise removal, though, and would potentially block indefinitely.
The driver previously had marked the queue as dying in this scenario
to prevent new requests from attempting, however it will still block
for requests that already entered the queue. This patch fixes this by
quiescing IO first, then aborting the requeued requests before deleting
disks.
Reported-by: Sujith Pandel <sujith_pandel@dell.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Sujith Pandel <sujith_pandel@dell.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Andrew Honig [Wed, 18 Nov 2015 22:50:23 +0000 (14:50 -0800)]
KVM: x86: Reload pit counters for all channels when restoring state
Currently if userspace restores the pit counters with a count of 0
on channels 1 or 2 and the guest attempts to read the count on those
channels, then KVM will perform a mod of 0 and crash. This will ensure
that 0 values are converted to 65536 as per the spec.
This is CVE-2015-7513.
Signed-off-by: Andy Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 22 Dec 2015 14:20:00 +0000 (15:20 +0100)]
KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUID
Virtual machines can be run with CPUID such that there are no MTRRs.
In that case, the firmware will never enable MTRRs and it is obviously
undesirable to run the guest entirely with UC memory. Check out guest
CPUID, and use WB memory if MTRR do not exist.
Cc: qemu-stable@nongnu.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 14 Dec 2015 15:57:31 +0000 (16:57 +0100)]
KVM: MTRR: observe maxphyaddr from guest CPUID, not host
Conversion of MTRRs to ranges used the maxphyaddr from the boot CPU.
This is wrong, because var_mtrr_range's mask variable then is discontiguous
(like
FF00FFFF000, where the first run of 0s corresponds to the bits
between host and guest maxphyaddr). Instead always set up the masks
to be full 64-bit values---we know that the reserved bits at the top
are zero, and we can restore them when reading the MSR. This way
var_mtrr_range gets a mask that just works.
Fixes:
a13842dc668b40daef4327294a6d3bdc8bd30276
Cc: qemu-stable@nongnu.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexis Dambricourt [Mon, 14 Dec 2015 14:39:34 +0000 (15:39 +0100)]
KVM: MTRR: fix fixed MTRR segment look up
This fixes the slow-down of VM running with pci-passthrough, since some MTRR
range changed from MTRR_TYPE_WRBACK to MTRR_TYPE_UNCACHABLE. Memory in the
0K-640K range was incorrectly treated as uncacheable.
Fixes:
f7bfb57b3e89ff89c0da9f93dedab89f68d6ca27
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexis Dambricourt <alexis.dambricourt@gmail.com>
[Use correct BZ for "Fixes" annotation. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gary Wang [Tue, 15 Dec 2015 04:40:30 +0000 (12:40 +0800)]
drm/i915: Correct max delay for HDMI hotplug live status checking
The total delay of HDMI hotplug detecting with 30ms have already
been split into a resolution of 3 retries of 10ms each, for the worst
cases. But it still suffered from only waiting 10ms at most in
intel_hdmi_detect(). This patch corrects it by reading hotplug status
with 4 times at most for 30ms delay.
v2:
- straight up to loop execution for more clear in code readability
- mdelay will replace with msleep by Daniel's new patch
drm/i915: mdelay(10) considered harmful
- suggest to re-evaluate try times for being compatible to old HDMI monitor
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gavin Hindman <gavin.hindman@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Gary Wang <gary.c.wang@intel.com>
[danvet: fixup conflict with s/mdelay/msleep/ patch.]
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit
61fb3980dd396880ffba48523b1e27579868b82b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Daniel Vetter [Fri, 11 Dec 2015 18:44:15 +0000 (19:44 +0100)]
drm/i915: mdelay(10) considered harmful
I missed this myself when reviewing
commit
237ed86c693d8a8e4db476976aeb30df4deac74b
Author: Sonika Jindal <sonika.jindal@intel.com>
Date: Tue Sep 15 09:44:20 2015 +0530
drm/i915: Check live status before reading edid
Long sleeps like this really shouldn't waste cpu cycles spinning.
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: "Wang, Gary C" <gary.c.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449859455-32609-1-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit
71a199bacb398ee54eeac001699257dda083a455)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Mon, 14 Dec 2015 15:35:02 +0000 (17:35 +0200)]
drm/i915: Kill intel_crtc->cursor_bo
The vma may have been rebound between the last time the cursor was
enabled and now, so skipping the cursor gtt offset deduction is not
safe unless we would also reset cursor_bo to NULL when disabling the
cursor. Just thow cursor_bo to the bin instead since it's lost all
other uses thanks to universal plane support.
Chris pointed out that cursor updates are currently too slow
via universal planes that micro optimizations like these wouldn't
even help.
v2: Add a note about futility of micro optimizations (Chris)
Cc: drm-intel-fixes@lists.freedesktop.org
References: http://lists.freedesktop.org/archives/intel-gfx/2015-December/082976.html
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450107302-17171-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit
1264859d648c4bdc9f0a098efbff90cbf462a075)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Fri, 18 Dec 2015 17:24:39 +0000 (19:24 +0200)]
drm/i915: Workaround CHV pipe C cursor fail
Turns out CHV pipe C was glued on somewhat poorly, and there's something
wrong with the cursor. If the cursor straddles the left screen edge,
and is then moved away from the edge or disabled, the pipe will often
underrun. If enough underruns are triggered quickly enough the pipe
will fall over and die (it just scans out a solid color and reports
a constant underrun). We need to turn the disp2d power well off and
on again to recover the pipe.
None of that is very nice for the user, so let's just refuse to place
the cursor in the compromised position. The ddx appears to fall back
to swcursor when the ioctl returns an error, so theoretically there's
no loss of functionality for the user (discounting swcursor bugs).
I suppose most cursors images actually have the hotspot not exactly
at 0,0 so under typical conditions the fallback will in fact kick in
as soon as the cursor touches the left edge of the screen.
Any atomic compositor should anyway be prepared to fall back to
GPU composition when things don't work out, so there should be no
problem with those.
Other things that I tried to solve this include flipping all
display related clock gating knobs I could find, increasing the
minimum gtt alignment all the way up to 512k. I also tried to see
if there are more specific screen coordinates that hit the bug, but
the findings were somewhat inconclusive. Sometimes the failures
happen almost across the whole left edge, sometimes more at the very
top and around the bottom half. I wasn't able to find any real pattern
to these variations, so it seems our only choice is to just refuse
to straddle the left screen edge at all.
Cc: stable@vger.kernel.org
Cc: Jason Plum <max@warheads.net>
Testcase: igt/kms_chv_cursor_fail
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92826
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450459479-16286-1-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit
b29ec92c4f5e6d45d8bae8194e664427a01c6687)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Fri, 11 Dec 2015 11:32:59 +0000 (11:32 +0000)]
drm/i915: Only spin whilst waiting on the current request
Limit busywaiting only to the request currently being processed by the
GPU. If the request is not currently being processed by the GPU, there
is a very low likelihood of it being completed within the 2 microsecond
spin timeout and so we will just be wasting CPU cycles.
v2: Check for logical inversion when rebasing - we were incorrectly
checking for this request being active, and instead busywaiting for
when the GPU was not yet processing the request of interest.
v3: Try another colour for the seqno names.
v4: Another colour for the function names.
v5: Remove the forced coherency when checking for the active request. On
reflection and plenty of recent experimentation, the issue is not a
cache coherency problem - but an irq/seqno ordering problem (timing issue).
Here, we do not need the w/a to force ordering of the read with an
interrupt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-4-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit
821485dc2ad665f136c57ee589bf7a8210160fe2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Fri, 11 Dec 2015 11:32:58 +0000 (11:32 +0000)]
drm/i915: Limit the busy wait on requests to 5us not 10ms!
When waiting for high frequency requests, the finite amount of time
required to set up the irq and wait upon it limits the response rate. By
busywaiting on the request completion for a short while we can service
the high frequency waits as quick as possible. However, if it is a slow
request, we want to sleep as quickly as possible. The tradeoff between
waiting and sleeping is roughly the time it takes to sleep on a request,
on the order of a microsecond. Based on measurements of synchronous
workloads from across big core and little atom, I have set the limit for
busywaiting as 10 microseconds. In most of the synchronous cases, we can
reduce the limit down to as little as 2 miscroseconds, but that leaves
quite a few test cases regressing by factors of 3 and more.
The code currently uses the jiffie clock, but that is far too coarse (on
the order of 10 milliseconds) and results in poor interactivity as the
CPU ends up being hogged by slow requests. To get microsecond resolution
we need to use a high resolution timer. The cheapest of which is polling
local_clock(), but that is only valid on the same CPU. If we switch CPUs
because the task was preempted, we can also use that as an indicator that
the system is too busy to waste cycles on spinning and we should sleep
instead.
__i915_spin_request was introduced in
commit
2def4ad99befa25775dd2f714fdd4d92faec6e34 [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:41 2015 +0100
drm/i915: Optimistically spin for the request completion
v2: Drop full u64 for unsigned long - the timer is 32bit wraparound safe,
so we can use native register sizes on smaller architectures. Mention
the approximate microseconds units for elapsed time and add some extra
comments describing the reason for busywaiting.
v3: Raise the limit to 10us
v4: Now 5us.
Reported-by: Jens Axboe <axboe@kernel.dk>
Link: https://lkml.org/lkml/2015/11/12/621
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-3-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit
ca5b721e238226af1d767103ac852aeb8e4c0764)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Fri, 11 Dec 2015 11:32:57 +0000 (11:32 +0000)]
drm/i915: Break busywaiting for requests on pending signals
The busywait in __i915_spin_request() does not respect pending signals
and so may consume the entire timeslice for the task instead of
returning to userspace to handle the signal.
In the worst case this could cause a delay in signal processing of 20ms,
which would be a noticeable jitter in cursor tracking. If a higher
resolution signal was being used, for example to provide fairness of a
server timeslices between clients, we could expect to detect some
unfairness between clients (i.e. some windows not updating as fast as
others). This issue was noticed when inspecting a report of poor
interactivity resulting from excessively high __i915_spin_request usage.
Fixes regression from
commit
2def4ad99befa25775dd2f714fdd4d92faec6e34 [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:41 2015 +0100
drm/i915: Optimistically spin for the request completion
v2: Try to assess the impact of the bug
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc; "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-2-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit
91b0c352ace9afec1fb51590c7b8bd60e0eb9fbd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Matt Roper [Thu, 3 Dec 2015 19:37:36 +0000 (11:37 -0800)]
drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2)
If we fail to reconstruct the BIOS fb (e.g., because the FB is too
large), we'll be left with plane state that indicates the primary plane
is visible yet has a NULL fb. This mismatch causes problems later on
(e.g., for the watermark code). Since we've failed to reconstruct the
BIOS FB, the best solution is to just disable the primary plane and
pretend the BIOS never had it enabled.
v2: Add intel_pre_disable_primary() call (Maarten)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449171462-30763-2-git-send-email-matthew.d.roper@intel.com
(cherry picked from commit
200757f5d7c6f7f7032a0a07bbb8c02a840bbf7d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Fri, 20 Nov 2015 14:16:39 +0000 (14:16 +0000)]
drm/i915: Set the map-and-fenceable flag for preallocated objects
As we mark the preallocated objects as bound, we should also flag them
correctly as being map-and-fenceable (if appropriate!) so that later
users do not get confused and try and rebind the pinned vma in order to
get a map-and-fenceable binding.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Goel, Akash" <akash.goel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: drm-intel-fixes@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/1448029000-10616-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit
d0710abbcd88b1ff17760e97d74a673e67b49ea1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Mon, 14 Dec 2015 11:16:48 +0000 (13:16 +0200)]
drm/i915: Drop the broken cursor base==0 special casing
The cursor code tries to treat base==0 to mean disabled. That fails
when the cursor bo gets bound at ggtt offset 0, and the user is left
looking at an invisible cursor.
We lose the disabled->disabled optimization, but that seems like
something better handled at a slightly higher level.
Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450091808-32607-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit
663f3122d00c0b412d429f105dca129aa8f4f094)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Mario Kleiner [Mon, 21 Dec 2015 23:45:43 +0000 (00:45 +0100)]
ALSA: hda/realtek - Fix silent headphone output on MacPro 4,1 (v2)
Without this patch, internal speaker and line-out work,
but front headphone output jack stays silent on the
Mac Pro 4,1.
This code path also gets executed on the MacPro 5,1 due
to identical codec SSID, but i don't know if it has any
positive or adverse effects there or not.
(v2) Implement feedback from Takashi Iwai: Reuse
alc889_fixup_mbp_vref and just add a new nid
0x19 for the MacPro 4,1.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Mon, 21 Dec 2015 00:06:09 +0000 (16:06 -0800)]
Linux 4.4-rc6
Linus Torvalds [Sun, 20 Dec 2015 18:01:11 +0000 (10:01 -0800)]
Merge tag 'rtc-4.4-3' of git://git./linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Late fixes for the RTC subsystem for 4.4:
A fix for a nasty hardware bug in rk808 and an initialization
reordering in da9063 to fix a possible crash"
* tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: da9063: fix access ordering error during RTC interrupt at system power on
rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
Steve Twiss [Tue, 8 Dec 2015 16:28:39 +0000 (16:28 +0000)]
rtc: da9063: fix access ordering error during RTC interrupt at system power on
This fix alters the ordering of the IRQ and device registrations in the RTC
driver probe function. This change will apply to the RTC driver that supports
both DA9063 and DA9062 PMICs.
A problem could occur with the existing RTC driver if:
A system is started from a cold boot using the PMIC RTC IRQ to initiate a
power on operation. For instance, if an RTC alarm is used to start a
platform from power off.
The existing driver IRQ is requested before the device has been properly
registered.
i.e.
ret = devm_request_threaded_irq()
comes before
rtc->rtc_dev = devm_rtc_device_register();
In this case, the interrupt can be called before the device has been
registered and the handler can be called immediately. The IRQ handler
da9063_alarm_event() contains the function call
rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
which in turn tries to access the unavailable rtc->rtc_dev.
The fix is to reorder the functions inside the RTC probe. The IRQ is
requested after the RTC device resource has been registered so that
get_irq_byname is the last thing to happen.
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Julius Werner [Tue, 15 Dec 2015 23:02:49 +0000 (15:02 -0800)]
rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar
insufficiently represented reality, and changed the rules about
calculating leap years to account for this. Similarly, in A.D. 2013
Rockchip hardware engineers found that the new Gregorian calendar still
contained flaws, and that the month of November should be counted up to
31 days instead. Unfortunately it takes a long time for calendar changes
to gain widespread adoption, and just like more than 300 years went by
before the last Protestant nation implemented Greg's proposal, we will
have to wait a while until all religions and operating system kernels
acknowledge the inherent advantages of the Rockchip system. Until then
we need to translate dates read from (and written to) Rockchip hardware
back to the Gregorian format.
This patch works by defining Jan 1st, 2016 as the arbitrary anchor date
on which Rockchip and Gregorian calendars are in sync. From that we can
translate arbitrary later dates back and forth by counting the number
of November/December transitons since the anchor date to determine the
offset between the calendars. We choose this method (rather than trying
to regularly "correct" the date stored in hardware) since it's the only
way to ensure perfect time-keeping even if the system may be shut down
for an unknown number of years. The drawback is that other software
reading the same hardware (e.g. mainboard firmware) must use the same
translation convention (including the same anchor date) to be able to
read and write correct timestamps from/to the RTC.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Linus Torvalds [Sun, 20 Dec 2015 01:44:19 +0000 (17:44 -0800)]
Merge tag 'tty-4.4-rc6' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty/serial driver fixes for 4.4-rc6 that resolve some
reported problems. All of these have been in linux-next. The details
are in the shortlog"
* tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix GPF in flush_to_ldisc()
serial: earlycon: Add missing spinlock initialization
serial: sh-sci: Fix length of scatterlist
n_tty: Fix poll() after buffer-limited eof push read
serial: 8250_uniphier: fix dl_read and dl_write functions
Linus Torvalds [Sun, 20 Dec 2015 01:33:58 +0000 (17:33 -0800)]
Merge tag 'usb-4.4-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB and PHY fixes for 4.4-rc6. All of them resolve some
reported problems. Full details in the shortlog"
* tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: fix invalid memory access in hub_activate()
USB: ipaq.c: fix a timeout loop
phy: core: Get a refcount to phy in devm_of_phy_get_by_index()
phy: cygnus: pcie: add missing of_node_put
phy: miphy365x: add missing of_node_put
phy: miphy28lp: add missing of_node_put
phy: rockchip-usb: add missing of_node_put
phy: berlin-sata: add missing of_node_put
phy: mt65xx-usb3: add missing of_node_put
phy: brcmstb-sata: add missing of_node_put
phy: sun9i-usb: add USB dependency
Linus Torvalds [Sun, 20 Dec 2015 00:46:46 +0000 (16:46 -0800)]
Merge tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Four fixes for md:
- two recently introduced regressions fixed.
- one older bug in RAID10 - tagged for -stable since 4.2
- one minor sysfs api improvement"
* tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md:
Fix remove_and_add_spares removes drive added as spare in slot_store
md: fix bug due to nested suspend
MD: change journal disk role to disk 0
md/raid10: fix data corruption and crash during resync
Linus Torvalds [Sun, 20 Dec 2015 00:40:48 +0000 (16:40 -0800)]
Merge tag 'powerpc-4.4-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Partial revert of "powerpc: Individual System V IPC system calls"
- pr_warn_once on unsupported OPAL_MSG type from Stewart
- Fix deadlock in opal-irqchip introduced by "Fix double endian
conversion" from Alistair
* tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion"
powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type
Partial revert of "powerpc: Individual System V IPC system calls"
Dave Airlie [Sat, 19 Dec 2015 22:51:34 +0000 (08:51 +1000)]
Merge branch 'exynos-drm-fixes' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes
just one regression fix.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: atomic check only enabled crtc states
Linus Torvalds [Sat, 19 Dec 2015 18:10:43 +0000 (10:10 -0800)]
Merge tag 'spi-fix-v4.4-rc5' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of reference counting bugs here, one in spidev and one with
holding an extra reference in the core that we never freed if we
removed a device, plus a driver specific fix. Both of the refcounting
bugs are very old but they've only been found by observation so
hopefully their impact has been low"
* tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix parent-device reference leak
spi: spidev: Hold spi_lock over all defererences of spi in release()
spi-fsl-dspi: Fix CTAR Register access
Linus Torvalds [Sat, 19 Dec 2015 18:05:00 +0000 (10:05 -0800)]
Merge tag 'gpio-v4.4-3' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes for the v4.4 series. Most prominent: I revert the
error propagation from the .get() function until we can fix up all the
drivers properly for v4.5.
- Revert the error number propagation from the .get() vtable entry
temporarily, until we make the proper fixes to all drivers.
- Fix the clamping behaviour in the generic GPIO driver.
- Driver fix for the ath79 driver"
* tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: revert get() to non-errorprogating behaviour
gpio: generic: clamp values from bgpio_get_set()
gpio: ath79: Fix the logic to clear offset bit of AR71XX_GPIO_REG_OE register
Linus Torvalds [Sat, 19 Dec 2015 18:01:03 +0000 (10:01 -0800)]
Merge tag 'pinctrl-v4.4-3' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Driver fixes for Freescale i.MX7D, Intel, Broadcom 2835
- One MAINTAINERS entry
* tag 'pinctrl-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: pinctrl: Add maintainers for pinctrl-single
pinctrl: bcm2835: Fix initial value for direction_output
pinctrl: intel: fix offset calculation issue of register PAD_OWN
pinctrl: intel: fix bug of register offset calculation
pinctrl: freescale: add ZERO_OFFSET_VALID flag for vf610 pinctrl
Linus Torvalds [Sat, 19 Dec 2015 17:52:44 +0000 (09:52 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of 'usual' driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rcar: disable runtime PM correctly in slave mode
i2c: designware: Keep pm_runtime_enable/_disable calls in sync
i2c: designware: fix IO timeout issue for AMD controller
i2c: imx: init bus recovery info before adding i2c adapter
i2c: do not use 0x in front of %pa
i2c: davinci: Increase module clock frequency
i2c: mv64xxx: The n clockdiv factor is 0 based on sunxi SoCs
i2c: rk3x: populate correct variable for sda_falling_time
Linus Torvalds [Sat, 19 Dec 2015 17:51:11 +0000 (09:51 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Just a few assorted driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elants_i2c - fix wake-on-touch
Input: elan_i2c - set input device's vendor and product IDs
Input: sun4i-lradc-keys - fix typo in binding documentation
Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload
Input: arizona-haptic - fix disabling of haptics device
Input: aiptek - fix crash on detecting device without endpoints
Input: atmel_mxt_ts - add generic platform data for Chromebooks
Input: parkbd - clear unused function pointers
Input: walkera0701 - clear unused function pointers
Input: turbografx - clear unused function pointers
Input: gamecon - clear unused function pointers
Input: db9 - clear unused function pointers
Andrzej Hajda [Fri, 27 Nov 2015 06:57:31 +0000 (07:57 +0100)]
drm/exynos: atomic check only enabled crtc states
Since atomic check is called also for disabled crtcs it should skip
mode checking as it can be uninitialized. The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Wolfram Sang [Wed, 16 Dec 2015 19:05:18 +0000 (20:05 +0100)]
i2c: rcar: disable runtime PM correctly in slave mode
When we also are I2C slave, we need to disable runtime PM because the
address detection mechanism needs to be active all the time. However, we
can reenable runtime PM once the slave instance was unregistered. So,
use pm_runtime_get_sync/put to achieve this, since it has proper
refcounting. pm_runtime_allow/forbid is like a global knob controllable
from userspace which is unsuitable here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Linus Torvalds [Sat, 19 Dec 2015 05:01:35 +0000 (21:01 -0800)]
Merge tag 'pm+acpi-4.4-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a potential regression introduced during the 4.3 cycle
(generic power domains framework), a nasty bug that has been present
forever (power capping RAPL driver), a build issue (Tegra cpufreq
driver) and a minor ugliness introduced recently (intel_pstate).
Specifics:
- Fix a potential regression in the generic power domains framework
introduced during the 4.3 development cycle that may lead to
spurious failures of system suspend in certain situations (Ulf
Hansson).
- Fix a problem in the power capping RAPL (Running Average Power
Limits) driver that causes it to initialize successfully on some
systems where it is not supposed to do that which is due to an
incorrect check in an initialization routine (Prarit Bhargava).
- Fix a build problem in the cpufreq Tegra driver that depends on the
regulator framework, but that dependency is not reflected in
Kconfig (Arnd Bergmann).
- Fix a recent mistake in the intel_pstate driver where a numeric
constant is used directly instead of a symbol defined specifically
for the case in question (Prarit Bhargava)"
* tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap / RAPL: fix BIOS lock check
cpufreq: intel_pstate: Minor cleanup for FRAC_BITS
cpufreq: tegra: add regulator dependency for T124
PM / Domains: Allow runtime PM callbacks to be re-used during system PM
Linus Torvalds [Sat, 19 Dec 2015 04:35:35 +0000 (20:35 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes this time, two in SES picked up by KASAN for various types
of buffer overrun. The first is a USB array which returns page 8
whatever is asked for and causes us to overrun with incorrect data
format assumptions and the second is an invalid iteration of page 10
(the additional information page).
The final fix is a reversion of a NULL deref fix which caused
suspend/resume not to be called in pairs leading to incorrect device
operation (Jens has queued a more proper fix for the problem in
block)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
ses: fix additional element traversal bug
Revert "SCSI: Fix NULL pointer dereference in runtime PM"
ses: Fix problems with simple enclosures
Dave Airlie [Sat, 19 Dec 2015 03:25:42 +0000 (13:25 +1000)]
Merge branch 'linux-4.4' of git://github.com/skeggsb/linux into drm-fixes
single nouveau fix.
* 'linux-4.4' of git://github.com/skeggsb/linux:
drm/nouveau/bios/fan: hardcode the fan mode to linear
Dave Airlie [Sat, 19 Dec 2015 02:42:28 +0000 (12:42 +1000)]
Merge branch 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Just one important fix for amdgpu to avoid possible memory corruption.
* 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: fix user fence handling
James Chen [Fri, 18 Dec 2015 23:51:48 +0000 (15:51 -0800)]
Input: elants_i2c - fix wake-on-touch
When sending "SLEEP" command to the controller it ceases scanning
completely and is unable to wake the system up from sleep, so if it is
configured as a wakeup source we should simply configure interrupt for
wakeup and rely on idle logic within the controller to reduce power
consumption while it is not used.
Signed-off-by: James Chen <james.chen@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Fri, 18 Dec 2015 23:41:35 +0000 (15:41 -0800)]
Merge tag 'media/v4.4-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab.
* tag 'media/v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] airspy: increase USB control message buffer size
[media] hackrf: move RF gain ctrl enable behind module parameter
[media] hackrf: fix possible null ptr on debug printing
[media] Revert "[media] ivtv: avoid going past input/audio array"
Linus Torvalds [Fri, 18 Dec 2015 23:35:08 +0000 (15:35 -0800)]
Merge branch 'for-linus-4.4' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"A couple of small fixes"
* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: check prepare_uptodate_page() error code earlier
Btrfs: check for empty bitmap list in setup_cluster_bitmaps
btrfs: fix misleading warning when space cache failed to load
Btrfs: fix transaction handle leak in balance
Btrfs: fix unprotected list move from unused_bgs to deleted_bgs list
Linus Torvalds [Fri, 18 Dec 2015 22:25:57 +0000 (14:25 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"Three patches"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
include/linux/mmdebug.h: should include linux/bug.h
mm/zswap: change incorrect strncmp use to strcmp
proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter
James Morse [Fri, 18 Dec 2015 22:22:07 +0000 (14:22 -0800)]
include/linux/mmdebug.h: should include linux/bug.h
mmdebug.h uses BUILD_BUG_ON_INVALID(), assuming someone else included
linux/bug.h. Include it ourselves.
This saves build-failures such as:
arch/arm64/include/asm/pgtable.h: In function 'set_pte_at':
arch/arm64/include/asm/pgtable.h:281:3: error: implicit declaration of function 'BUILD_BUG_ON_INVALID' [-Werror=implicit-function-declaration]
VM_WARN_ONCE(!pte_young(pte),
Fixes:
02602a18c32d7 ("bug: completely remove code generated by disabled VM_BUG_ON()")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Streetman [Fri, 18 Dec 2015 22:22:04 +0000 (14:22 -0800)]
mm/zswap: change incorrect strncmp use to strcmp
Change the use of strncmp in zswap_pool_find_get() to strcmp.
The use of strncmp is no longer correct, now that zswap_zpool_type is
not an array; sizeof() will return the size of a pointer, which isn't
the right length to compare. We don't need to use strncmp anyway,
because the existing params and the passed in params are all guaranteed
to be null terminated, so strcmp should be used.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reported-by: Weijie Yang <weijie.yang@samsung.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Fri, 18 Dec 2015 22:22:01 +0000 (14:22 -0800)]
proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter
Writing to /proc/$pid/coredump_filter always returns -ESRCH because commit
774636e19ed51 ("proc: convert to kstrto*()/kstrto*_from_user()") removed
the setting of ret after the get_proc_task call and incorrectly left it as
-ESRCH. Instead, return 0 when successful.
Example breakage:
echo 0 > /proc/self/coredump_filter
bash: echo: write error: No such process
Fixes:
774636e19ed51 ("proc: convert to kstrto*()/kstrto*_from_user()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org> [4.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 18 Dec 2015 20:51:52 +0000 (12:51 -0800)]
Merge tag 'hwmon-for-linus-v4.4-rc6' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Select CONFIG_BITREVERSE for sht15 driver to avoid build failure if
it is not configured.
- Force wait for conversion time for the first valid data in tmp102
driver to avoid reporting erroneous data to the thermal subsystem.
* tag 'hwmon-for-linus-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (sht15) Select CONFIG_BITREVERSE
hwmon: (tmp102) Force wait for conversion time for the first valid data
Linus Torvalds [Fri, 18 Dec 2015 20:38:35 +0000 (12:38 -0800)]
Merge tag 'iommu-fixes-v4.4-rc5' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Two similar fixes for the Intel and AMD IOMMU drivers to add proper
access checks before calling handle_mm_fault"
* tag 'iommu-fixes-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Do access checks before calling handle_mm_fault()
iommu/amd: Do proper access checking before calling handle_mm_fault()
Linus Torvalds [Fri, 18 Dec 2015 20:24:52 +0000 (12:24 -0800)]
Merge tag 'for-linus-4.4-rc5-tag' of git://git./linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- XSA-155 security fixes to backend drivers.
- XSA-157 security fixes to pciback.
* tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: fix up cleanup path when alloc fails
xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.
xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled.
xen/pciback: Do not install an IRQ handler for MSI interrupts.
xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled
xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled
xen/pciback: Save xen_pci_op commands before processing it
xen-scsiback: safely copy requests
xen-blkback: read from indirect descriptors only once
xen-blkback: only read request operation from shared ring once
xen-netback: use RING_COPY_REQUEST() throughout
xen-netback: don't use last request to determine minimum Tx credit
xen: Add RING_COPY_REQUEST()
xen/x86/pvh: Use HVM's flush_tlb_others op
xen: Resume PMU from non-atomic context
xen/events/fifo: Consume unprocessed events when a CPU dies
Linus Torvalds [Fri, 18 Dec 2015 20:19:01 +0000 (12:19 -0800)]
Merge tag 'arc-fixes-for-4.4-rc6' of git://git./linux/kernel/git/vgupta/arc
Pull ARC architecture fixes from Vineet Gupta:
"Fixes for:
- perf interrupts on SMP: Not enabled (at boot) and disabled (at runtime)
- stack unwinder regression (for modules, ignoring dwarf3)
- nsim hosed for non default kernel link base builds"
* tag 'arc-fixes-for-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: smp: Rename platform hook @init_cpu_smp -> @init_per_cpu
ARC: rename smp operation init_irq_cpu() to init_per_cpu()
ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing
ARC: dw2 unwind: Reinstante unwinding out of modules
ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE
ARC: intc: Document arc_request_percpu_irq() better
ARCv2: perf: Ensure perf intr gets enabled on all cores
ARC: intc: No need to clear IRQ_NOAUTOEN
ARCv2: intc: Fix random perf irq disabling in SMP setup
ARC: [axs10x] cap ethernet phy to 100 Mbit/sec
Linus Torvalds [Fri, 18 Dec 2015 19:47:06 +0000 (11:47 -0800)]
Merge tag 'sound-4.4-rc6' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"As usual in rc6, this update contains only a few HD-audio and
USB-audio device-specific quirks: yet another Thinkpad noise fixes,
Dell headphone mic fixes, and AudioQuest DragonFly fixes"
* tag 'sound-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add a fixup for Thinkpad X1 Carbon 2nd
ALSA: hda - Set codec to D3 at reboot/shutdown on Thinkpads
ALSA: hda - Apply click noise workaround for Thinkpads generically
ALSA: hda - Fix headphone mic input on a few Dell ALC293 machines
ALSA: usb-audio: Add sample rate inquiry quirk for AudioQuest DragonFly
ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly
Linus Torvalds [Fri, 18 Dec 2015 19:19:16 +0000 (11:19 -0800)]
Merge tag 'for-linus-
20151217' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"I was holding out on this pull request for a bit, since there are a
few other small issues being discussed that look like 4.4-rc
regressions. Hopefully I can get those stabilized soon, but these are
ready at any rate:
- A little bit of a last-minute change for the device tree "fixed
partition" binding. This is needed because we might want to reuse
the 'partitions' subnode for other sorts of partitioning
descriptions -- e.g., for describing which on-flash partition
format(s) might be used on the system.
- Also tone down a warning message, since it is probably going to
show up on a lot of systems where it should just be ignored"
* tag 'for-linus-
20151217' of git://git.infradead.org/linux-mtd:
doc: dt: mtd: partitions: add compatible property to "partitions" node
mtd: ofpart: don't complain about missing 'partitions' node too loudly
Paolo Bonzini [Fri, 18 Dec 2015 18:14:46 +0000 (19:14 +0100)]
Merge tag 'kvm-arm-for-v4.4-rc6' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM fixes for v4.4-rc6
- Fix for the active interrupt detection code, affecting
the timer interrupt injection.
Alan Stern [Wed, 16 Dec 2015 18:32:38 +0000 (13:32 -0500)]
USB: fix invalid memory access in hub_activate()
Commit
8520f38099cc ("USB: change hub initialization sleeps to
delayed_work") changed the hub_activate() routine to make part of it
run in a workqueue. However, the commit failed to take a reference to
the usb_hub structure or to lock the hub interface while doing so. As
a result, if a hub is plugged in and quickly unplugged before the work
routine can run, the routine will try to access memory that has been
deallocated. Or, if the hub is unplugged while the routine is
running, the memory may be deallocated while it is in active use.
This patch fixes the problem by taking a reference to the usb_hub at
the start of hub_activate() and releasing it at the end (when the work
is finished), and by locking the hub interface while the work routine
is running. It also adds a check at the start of the routine to see
if the hub has already been disconnected, in which nothing should be
done.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Alexandru Cornea <alexandru.cornea@intel.com>
Tested-by: Alexandru Cornea <alexandru.cornea@intel.com>
Fixes:
8520f38099cc ("USB: change hub initialization sleeps to delayed_work")
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 16 Dec 2015 11:06:37 +0000 (14:06 +0300)]
USB: ipaq.c: fix a timeout loop
The code expects the loop to end with "retries" set to zero but, because
it is a post-op, it will end set to -1. I have fixed this by moving the
decrement inside the loop.
Fixes:
014aa2a3c32e ('USB: ipaq: minor ipaq_open() cleanup.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Antti Palosaari [Mon, 26 Oct 2015 20:58:14 +0000 (18:58 -0200)]
[media] airspy: increase USB control message buffer size
Driver requested device firmware version string during probe using
only 24 byte long buffer. That buffer is too small for newer firmware
versions, which causes device firmware hang - device stops responding
to any commands after that. Increase buffer size to 128 which should
be enough for any current and future version strings.
Link: https://github.com/airspy/host/issues/27
Cc: <stable@vger.kernel.org> # 3.17+
Reported-by: Benjamin Vernoux <bvernoux@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Fri, 23 Oct 2015 22:01:31 +0000 (20:01 -0200)]
[media] hackrf: move RF gain ctrl enable behind module parameter
Used Avago MGA-81563 RF amplifier could be destroyed pretty easily
with too strong signal or transmitting to bad antenna.
Add module parameter 'enable_rf_gain_ctrl' which allows enabling
RF gain control - otherwise, default without the module parameter,
RF gain control is set to 'grabbed' state which prevents setting
value to the control.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Wed, 21 Oct 2015 21:02:41 +0000 (19:02 -0200)]
[media] hackrf: fix possible null ptr on debug printing
drivers/media/usb/hackrf/hackrf.c:1533 hackrf_probe()
error: we previously assumed 'dev' could be null (see line 1366)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Wed, 11 Nov 2015 11:22:36 +0000 (09:22 -0200)]
[media] Revert "[media] ivtv: avoid going past input/audio array"
This patch broke ivtv logic, as reported at
https://bugzilla.redhat.com/show_bug.cgi?id=
1278942
This reverts commit
09290cc885937cab3b2d60a6d48fe3d2d3e04061.
Cc: stable@vger.kernel.org # for v4.1 and upper
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Greg Kroah-Hartman [Fri, 18 Dec 2015 17:24:50 +0000 (09:24 -0800)]
Merge tag 'phy-for-4.4-rc' of git://git./linux/kernel/git/kishon/linux-phy into usb-linus
Kishon writes:
phy: for 4.4 -rc
*) Add missing of_node_put in a bunch of PHY drivers
*) Add get_device in devm_of_phy_get_by_index()
*) Fix randconfig build error in sun9i usb driver
Doug Goldstein [Thu, 26 Nov 2015 20:32:39 +0000 (14:32 -0600)]
xen-pciback: fix up cleanup path when alloc fails
When allocating a pciback device fails, clear the private
field. This could lead to an use-after free, however
the 'really_probe' takes care of setting
dev_set_drvdata(dev, NULL) in its failure path (which we would
exercise if the ->probe function failed), so we we
are OK. However lets be defensive as the code can change.
Going forward we should clean up the pci_set_drvdata(dev, NULL)
in the various code-base. That will be for another day.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reported-by: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Arnd Bergmann [Fri, 18 Dec 2015 14:52:28 +0000 (15:52 +0100)]
hwmon: (sht15) Select CONFIG_BITREVERSE
If CONFIG_BITREVERSE is not built-in, the sht15 driver fails to link:
drivers/built-in.o: In function `sht15_crc8':
drivers/hwmon/sht15.c:195: undefined reference to `byte_rev_table'
This adds a Kconfig 'select' statement, like all other users of
bitrev.h have it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
33836ee98533 ("hwmon:change sht15_reverse()")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Zidan Wang [Fri, 18 Dec 2015 08:53:41 +0000 (16:53 +0800)]
ASoC: fsl_sai: fix no frame clk in master mode
After several open/close sai test with ctrl+c, there will be
I/O error. The SAI can't work anymore, can't recover. There
will be no frame clock. With adding the software reset in
trigger stop, the issue can be fixed.
This is a hardware bug/errata and reset is the only option.
According to the reference manual, the software reset doesn't
reset any control register but only internal hardware logics
such as bit clock generator, status flags, and FIFO pointers.
(Our purpose is just to reset the clock generator while the
software reset is the only way to do that.)
Since slave mode doesn't use the clock generator, only apply
the reset procedure to the master mode.
For asynchronous mode, TX will not be reset when RX is still
running. In this case, i can't reproduce this issue.
Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Konrad Rzeszutek Wilk [Mon, 2 Nov 2015 23:13:27 +0000 (18:13 -0500)]
xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.
commit
f598282f51 ("PCI: Fix the NIU MSI-X problem in a better way")
teaches us that dealing with MSI-X can be troublesome.
Further checks in the MSI-X architecture shows that if the
PCI_COMMAND_MEMORY bit is turned of in the PCI_COMMAND we
may not be able to access the BAR (since they are memory regions).
Since the MSI-X tables are located in there.. that can lead
to us causing PCIe errors. Inhibit us performing any
operation on the MSI-X unless the MEMORY bit is set.
Note that Xen hypervisor with:
"x86/MSI-X: access MSI-X table only after having enabled MSI-X"
will return:
xen_pciback: 0000:0a:00.1: error -6 enabling MSI-X for guest 3!
When the generic MSI code tries to setup the PIRQ without
MEMORY bit set. Which means with later versions of Xen
(4.6) this patch is not neccessary.
This is part of XSA-157
CC: stable@vger.kernel.org
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Wed, 1 Apr 2015 14:49:47 +0000 (10:49 -0400)]
xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled.
Otherwise just continue on, returning the same values as
previously (return of 0, and op->result has the PIRQ value).
This does not change the behavior of XEN_PCI_OP_disable_msi[|x].
The pci_disable_msi or pci_disable_msix have the checks for
msi_enabled or msix_enabled so they will error out immediately.
However the guest can still call these operations and cause
us to disable the 'ack_intr'. That means the backend IRQ handler
for the legacy interrupt will not respond to interrupts anymore.
This will lead to (if the device is causing an interrupt storm)
for the Linux generic code to disable the interrupt line.
Naturally this will only happen if the device in question
is plugged in on the motherboard on shared level interrupt GSI.
This is part of XSA-157
CC: stable@vger.kernel.org
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Mon, 2 Nov 2015 22:24:08 +0000 (17:24 -0500)]
xen/pciback: Do not install an IRQ handler for MSI interrupts.
Otherwise an guest can subvert the generic MSI code to trigger
an BUG_ON condition during MSI interrupt freeing:
for (i = 0; i < entry->nvec_used; i++)
BUG_ON(irq_has_action(entry->irq + i));
Xen PCI backed installs an IRQ handler (request_irq) for
the dev->irq whenever the guest writes PCI_COMMAND_MEMORY
(or PCI_COMMAND_IO) to the PCI_COMMAND register. This is
done in case the device has legacy interrupts the GSI line
is shared by the backend devices.
To subvert the backend the guest needs to make the backend
to change the dev->irq from the GSI to the MSI interrupt line,
make the backend allocate an interrupt handler, and then command
the backend to free the MSI interrupt and hit the BUG_ON.
Since the backend only calls 'request_irq' when the guest
writes to the PCI_COMMAND register the guest needs to call
XEN_PCI_OP_enable_msi before any other operation. This will
cause the generic MSI code to setup an MSI entry and
populate dev->irq with the new PIRQ value.
Then the guest can write to PCI_COMMAND PCI_COMMAND_MEMORY
and cause the backend to setup an IRQ handler for dev->irq
(which instead of the GSI value has the MSI pirq). See
'xen_pcibk_control_isr'.
Then the guest disables the MSI: XEN_PCI_OP_disable_msi
which ends up triggering the BUG_ON condition in 'free_msi_irqs'
as there is an IRQ handler for the entry->irq (dev->irq).
Note that this cannot be done using MSI-X as the generic
code does not over-write dev->irq with the MSI-X PIRQ values.
The patch inhibits setting up the IRQ handler if MSI or
MSI-X (for symmetry reasons) code had been called successfully.
P.S.
Xen PCIBack when it sets up the device for the guest consumption
ends up writting 0 to the PCI_COMMAND (see xen_pcibk_reset_device).
XSA-120 addendum patch removed that - however when upstreaming said
addendum we found that it caused issues with qemu upstream. That
has now been fixed in qemu upstream.
This is part of XSA-157
CC: stable@vger.kernel.org
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Mon, 2 Nov 2015 23:07:44 +0000 (18:07 -0500)]
xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled
The guest sequence of:
a) XEN_PCI_OP_enable_msix
b) XEN_PCI_OP_enable_msix
results in hitting an NULL pointer due to using freed pointers.
The device passed in the guest MUST have MSI-X capability.
The a) constructs and SysFS representation of MSI and MSI groups.
The b) adds a second set of them but adding in to SysFS fails (duplicate entry).
'populate_msi_sysfs' frees the newly allocated msi_irq_groups (note that
in a) pdev->msi_irq_groups is still set) and also free's ALL of the
MSI-X entries of the device (the ones allocated in step a) and b)).
The unwind code: 'free_msi_irqs' deletes all the entries and tries to
delete the pdev->msi_irq_groups (which hasn't been set to NULL).
However the pointers in the SysFS are already freed and we hit an
NULL pointer further on when 'strlen' is attempted on a freed pointer.
The patch adds a simple check in the XEN_PCI_OP_enable_msix to guard
against that. The check for msi_enabled is not stricly neccessary.
This is part of XSA-157
CC: stable@vger.kernel.org
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Fri, 3 Apr 2015 15:08:22 +0000 (11:08 -0400)]
xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled
The guest sequence of:
a) XEN_PCI_OP_enable_msi
b) XEN_PCI_OP_enable_msi
c) XEN_PCI_OP_disable_msi
results in hitting an BUG_ON condition in the msi.c code.
The MSI code uses an dev->msi_list to which it adds MSI entries.
Under the above conditions an BUG_ON() can be hit. The device
passed in the guest MUST have MSI capability.
The a) adds the entry to the dev->msi_list and sets msi_enabled.
The b) adds a second entry but adding in to SysFS fails (duplicate entry)
and deletes all of the entries from msi_list and returns (with msi_enabled
is still set). c) pci_disable_msi passes the msi_enabled checks and hits:
BUG_ON(list_empty(dev_to_msi_list(&dev->dev)));
and blows up.
The patch adds a simple check in the XEN_PCI_OP_enable_msi to guard
against that. The check for msix_enabled is not stricly neccessary.
This is part of XSA-157.
CC: stable@vger.kernel.org
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Mon, 16 Nov 2015 17:40:48 +0000 (12:40 -0500)]
xen/pciback: Save xen_pci_op commands before processing it
Double fetch vulnerabilities that happen when a variable is
fetched twice from shared memory but a security check is only
performed the first time.
The xen_pcibk_do_op function performs a switch statements on the op->cmd
value which is stored in shared memory. Interestingly this can result
in a double fetch vulnerability depending on the performed compiler
optimization.
This patch fixes it by saving the xen_pci_op command before
processing it. We also use 'barrier' to make sure that the
compiler does not perform any optimization.
This is part of XSA155.
CC: stable@vger.kernel.org
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
David Vrabel [Mon, 16 Nov 2015 18:02:32 +0000 (18:02 +0000)]
xen-scsiback: safely copy requests
The copy of the ring request was lacking a following barrier(),
potentially allowing the compiler to optimize the copy away.
Use RING_COPY_REQUEST() to ensure the request is copied to local
memory.
This is part of XSA155.
CC: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Roger Pau Monné [Tue, 3 Nov 2015 16:40:43 +0000 (16:40 +0000)]
xen-blkback: read from indirect descriptors only once
Since indirect descriptors are in memory shared with the frontend, the
frontend could alter the first_sect and last_sect values after they have
been validated but before they are recorded in the request. This may
result in I/O requests that overflow the foreign page, possibly
overwriting local pages when the I/O request is executed.
When parsing indirect descriptors, only read first_sect and last_sect
once.
This is part of XSA155.
CC: stable@vger.kernel.org
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Roger Pau Monné [Tue, 3 Nov 2015 16:34:09 +0000 (16:34 +0000)]
xen-blkback: only read request operation from shared ring once
A compiler may load a switch statement value multiple times, which could
be bad when the value is in memory shared with the frontend.
When converting a non-native request to a native one, ensure that
src->operation is only loaded once by using READ_ONCE().
This is part of XSA155.
CC: stable@vger.kernel.org
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
David Vrabel [Fri, 30 Oct 2015 15:17:06 +0000 (15:17 +0000)]
xen-netback: use RING_COPY_REQUEST() throughout
Instead of open-coding memcpy()s and directly accessing Tx and Rx
requests, use the new RING_COPY_REQUEST() that ensures the local copy
is correct.
This is more than is strictly necessary for guest Rx requests since
only the id and gref fields are used and it is harmless if the
frontend modifies these.
This is part of XSA155.
CC: stable@vger.kernel.org
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
David Vrabel [Fri, 30 Oct 2015 15:16:01 +0000 (15:16 +0000)]
xen-netback: don't use last request to determine minimum Tx credit
The last from guest transmitted request gives no indication about the
minimum amount of credit that the guest might need to send a packet
since the last packet might have been a small one.
Instead allow for the worst case 128 KiB packet.
This is part of XSA155.
CC: stable@vger.kernel.org
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
David Vrabel [Fri, 30 Oct 2015 14:58:08 +0000 (14:58 +0000)]
xen: Add RING_COPY_REQUEST()
Using RING_GET_REQUEST() on a shared ring is easy to use incorrectly
(i.e., by not considering that the other end may alter the data in the
shared ring while it is being inspected). Safe usage of a request
generally requires taking a local copy.
Provide a RING_COPY_REQUEST() macro to use instead of
RING_GET_REQUEST() and an open-coded memcpy(). This takes care of
ensuring that the copy is done correctly regardless of any possible
compiler optimizations.
Use a volatile source to prevent the compiler from reordering or
omitting the copy.
This is part of XSA155.
CC: stable@vger.kernel.org
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Michael Holzheu [Thu, 17 Dec 2015 18:06:02 +0000 (19:06 +0100)]
s390/dis: Fix handling of format specifiers
The print_insn() function returns strings like "lghi %r1,0". To escape the
'%' character in sprintf() a second '%' is used. For example "lghi %%r1,0"
is converted into "lghi %r1,0".
After print_insn() the output string is passed to printk(). Because format
specifiers like "%r" or "%f" are ignored by printk() this works by chance
most of the time. But for instructions with control registers like
"lctl %c6,%c6,780" this fails because printk() interprets "%c" as
character format specifier.
Fix this problem and escape the '%' characters twice.
For example "lctl %%%%c6,%%%%c6,780" is then converted by sprintf()
into "lctl %%c6,%%c6,780" and by printk() into "lctl %c6,%c6,780".
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Alistair Popple [Fri, 18 Dec 2015 06:16:17 +0000 (17:16 +1100)]
powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion"
Commit
25642e1459ac ("powerpc/opal-irqchip: Fix double endian
conversion") fixed an endian bug by calling opal_handle_events() in
opal_event_unmask().
However this introduced a deadlock if we find an event is active
during unmasking and call opal_handle_events() again. The bad call
sequence is:
opal_interrupt()
-> opal_handle_events()
-> generic_handle_irq()
-> handle_level_irq()
-> raw_spin_lock(&desc->lock)
handle_irq_event(desc)
unmask_irq(desc)
-> opal_event_unmask()
-> opal_handle_events()
-> generic_handle_irq()
-> handle_level_irq()
-> raw_spin_lock(&desc->lock) (BOOM)
When generating multiple opal events in quick succession this would lead
to the following stall warnings:
EEH: Fenced PHB#0 detected, location: U78C9.001.WZS09XA-P1-C32
INFO: rcu_sched detected stalls on CPUs/tasks:
12-...: (1 GPs behind) idle=68f/
140000000000001/0 softirq=860/861 fqs=2065
15-...: (1 GPs behind) idle=be5/
140000000000001/0 softirq=1142/1143 fqs=2065
(detected by 13, t=2102 jiffies, g=1325, c=1324, q=602)
NMI watchdog: BUG: soft lockup - CPU#18 stuck for 22s! [irqbalance:2696]
INFO: rcu_sched detected stalls on CPUs/tasks:
12-...: (1 GPs behind) idle=68f/
140000000000001/0 softirq=860/861 fqs=8371
15-...: (1 GPs behind) idle=be5/
140000000000001/0 softirq=1142/1143 fqs=8371
(detected by 20, t=8407 jiffies, g=1325, c=1324, q=1290)
This patch corrects the problem by queuing the work if an event is
active during unmasking, which is similar to the pre-endian fix
behaviour.
Fixes:
25642e1459ac ("powerpc/opal-irqchip: Fix double endian conversion")
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Xiong Zhang [Fri, 18 Dec 2015 05:29:18 +0000 (13:29 +0800)]
ALSA: hda - Set SKL+ hda controller power at freeze() and thaw()
It takes three minutes to enter into hibernation on some OEM SKL
machines and we see many codec spurious response after thaw() opertion.
This is because HDA is still in D0 state after freeze() call and
pci_pm_freeze/pci_pm_freeze_noirq() don't set D3 hot in pci_bus driver.
It seems bios still access HDA when system enter into freeze state,
HDA will receive codec response interrupt immediately after thaw() call.
Because of this unexpected interrupt, HDA enter into a abnormal
state and slow down the system enter into hibernation.
In this patch, we put HDA into D3 hot state in azx_freeze_noirq() and
put HDA into D0 state in azx_thaw_noirq().
V2: Only apply this fix to SKL+
Fix compile error when CONFIG_PM_SLEEP isn't defined
[Yet another fix for CONFIG_PM_SLEEP ifdef and the additional comment
by tiwai]
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Goldwyn Rodrigues [Fri, 18 Dec 2015 04:19:16 +0000 (15:19 +1100)]
Fix remove_and_add_spares removes drive added as spare in slot_store
Commit
2910ff17d154baa5eb50e362a91104e831eb2bb6
introduced a regression which would remove a recently added spare via
slot_store. Revert part of the patch which touches slot_store() and add
the disk directly using pers->hot_add_disk()
Fixes:
2910ff17d154 ("md: remove_and_add_spares() to activate specific
rdev")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Mikulas Patocka [Fri, 18 Dec 2015 04:19:16 +0000 (15:19 +1100)]
md: fix bug due to nested suspend
The patch
c7bfced9a6716ff66c9d61f934bb60af08d4688c committed to 4.4-rc
causes crash in LVM test shell/lvchange-raid.sh. The kernel crashes with
this BUG, the reason is that we attempt to suspend a device that is
already suspended. See also
https://bugzilla.redhat.com/show_bug.cgi?id=
1283491
This patch fixes the bug by changing functions mddev_suspend and
mddev_resume to always nest.
The number of nested calls to mddev_nested_suspend is kept in the
variable mddev->suspended.
[neilb: made mddev_suspend() always nest instead of introduce mddev_nested_suspend]
kernel BUG at drivers/md/md.c:317!
CPU: 3 PID: 32754 Comm: lvm Not tainted 4.4.0-rc2 #1
task:
0000000047076040 ti:
0000000047014000 task.ti:
0000000047014000
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW:
00001000000001000000000000001111 Not tainted
r00-03
000000000804000f 00000000102c5280 0000000010c7522c 000000007e3d1810
r04-07
0000000010c6f000 000000004ef37f20 000000007e3d1dd0 000000007e3d1810
r08-11
000000007c9f1600 0000000000000000 0000000000000001 ffffffffffffffff
r12-15
0000000010c1d000 0000000000000041 00000000f98d63c8 00000000f98e49e4
r16-19
00000000f98e49e4 00000000c138fd06 00000000f98d63c8 0000000000000001
r20-23
0000000000000002 000000004ef37f00 00000000000000b0 00000000000001d1
r24-27
00000000424783a0 000000007e3d1dd0 000000007e3d1810 00000000102b2000
r28-31
0000000000000001 0000000047014840 0000000047014930 0000000000000001
sr00-03
0000000007040800 0000000000000000 0000000000000000 0000000007040800
sr04-07
0000000000000000 0000000000000000 0000000000000000 0000000000000000
IASQ:
0000000000000000 0000000000000000 IAOQ:
00000000102c538c 00000000102c5390
IIR:
03ffe01f ISR:
0000000000000000 IOR:
00000000102b2748
CPU: 3 CR30:
0000000047014000 CR31:
0000000000000000
ORIG_R28:
00000000000000b0
IAOQ[0]: mddev_suspend+0x10c/0x160 [md_mod]
IAOQ[1]: mddev_suspend+0x110/0x160 [md_mod]
RP(r2): raid1_add_disk+0xd4/0x2c0 [raid1]
Backtrace:
[<
0000000010c7522c>] raid1_add_disk+0xd4/0x2c0 [raid1]
[<
0000000010c20078>] raid_resume+0x390/0x418 [dm_raid]
[<
00000000105833e8>] dm_table_resume_targets+0xc0/0x188 [dm_mod]
[<
000000001057f784>] dm_resume+0x144/0x1e0 [dm_mod]
[<
0000000010587dd4>] dev_suspend+0x1e4/0x568 [dm_mod]
[<
0000000010589278>] ctl_ioctl+0x1e8/0x428 [dm_mod]
[<
0000000010589518>] dm_compat_ctl_ioctl+0x18/0x68 [dm_mod]
[<
0000000040377b88>] compat_SyS_ioctl+0xd0/0x1558
Fixes:
c7bfced9a671 ("md: suspend i/o during runtime blk_integrity_unregister")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Shaohua Li [Fri, 18 Dec 2015 04:19:16 +0000 (15:19 +1100)]
MD: change journal disk role to disk 0
Neil pointed out setting journal disk role to raid_disks will confuse
reshape if we support reshape eventually. Switching the role to 0 (we
should be fine as long as the value >=0) and skip sysfs file creation to
avoid error.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Artur Paszkiewicz [Fri, 18 Dec 2015 04:19:16 +0000 (15:19 +1100)]
md/raid10: fix data corruption and crash during resync
The commit
c31df25f20e3 ("md/raid10: make sync_request_write() call
bio_copy_data()") replaced manual data copying with bio_copy_data() but
it doesn't work as intended. The source bio (fbio) is already processed,
so its bvec_iter has bi_size == 0 and bi_idx == bi_vcnt. Because of
this, bio_copy_data() either does not copy anything, or worse, copies
data from the ->bi_next bio if it is set. This causes wrong data to be
written to drives during resync and sometimes lockups/crashes in
bio_copy_data():
[ 517.338478] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [md126_raid10:3319]
[ 517.347324] Modules linked in: raid10 xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables x86_pkg_temp_thermal coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul cryptd shpchp pcspkr ipmi_si ipmi_msghandler tpm_crb acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sr_mod cdrom sd_mod e1000e ax88179_178a usbnet mii ahci ata_generic crc32c_intel libahci ptp pata_acpi libata pps_core wmi sunrpc dm_mirror dm_region_hash dm_log dm_mod
[ 517.440555] CPU: 0 PID: 3319 Comm: md126_raid10 Not tainted 4.3.0-rc6+ #1
[ 517.448384] Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0055.D14.
1509221924 09/22/2015
[ 517.459768] task:
ffff880153773980 ti:
ffff880150df8000 task.ti:
ffff880150df8000
[ 517.468529] RIP: 0010:[<
ffffffff812e1888>] [<
ffffffff812e1888>] bio_copy_data+0xc8/0x3c0
[ 517.478164] RSP: 0018:
ffff880150dfbc98 EFLAGS:
00000246
[ 517.484341] RAX:
ffff880169356688 RBX:
0000000000001000 RCX:
0000000000000000
[ 517.492558] RDX:
0000000000000000 RSI:
ffffea0001ac2980 RDI:
ffffea0000d835c0
[ 517.500773] RBP:
ffff880150dfbd08 R08:
0000000000000001 R09:
ffff880153773980
[ 517.508987] R10:
ffff880169356600 R11:
0000000000001000 R12:
0000000000010000
[ 517.517199] R13:
000000000000e000 R14:
0000000000000000 R15:
0000000000001000
[ 517.525412] FS:
0000000000000000(0000) GS:
ffff880174a00000(0000) knlGS:
0000000000000000
[ 517.534844] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 517.541507] CR2:
00007f8a044d5fed CR3:
0000000169504000 CR4:
00000000001406f0
[ 517.549722] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 517.557929] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 517.566144] Stack:
[ 517.568626]
ffff880174a16bc0 ffff880153773980 ffff880169356600 0000000000000000
[ 517.577659]
0000000000000001 0000000000000001 ffff880153773980 ffff88016a61a800
[ 517.586715]
ffff880150dfbcf8 0000000000000001 ffff88016dd209e0 0000000000001000
[ 517.595773] Call Trace:
[ 517.598747] [<
ffffffffa043ef95>] raid10d+0xfc5/0x1690 [raid10]
[ 517.605610] [<
ffffffff816697ae>] ? __schedule+0x29e/0x8e2
[ 517.611987] [<
ffffffff814ff206>] md_thread+0x106/0x140
[ 517.618072] [<
ffffffff810c1d80>] ? wait_woken+0x80/0x80
[ 517.624252] [<
ffffffff814ff100>] ? super_1_load+0x520/0x520
[ 517.630817] [<
ffffffff8109ef89>] kthread+0xc9/0xe0
[ 517.636506] [<
ffffffff8109eec0>] ? flush_kthread_worker+0x70/0x70
[ 517.643653] [<
ffffffff8166d99f>] ret_from_fork+0x3f/0x70
[ 517.649929] [<
ffffffff8109eec0>] ? flush_kthread_worker+0x70/0x70
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Shaohua Li <shli@kernel.org>
Cc: stable@vger.kernel.org (v4.2+)
Fixes:
c31df25f20e3 ("md/raid10: make sync_request_write() call bio_copy_data()")
Signed-off-by: NeilBrown <neilb@suse.com>
Martin Peres [Sun, 29 Nov 2015 14:10:18 +0000 (16:10 +0200)]
drm/nouveau/bios/fan: hardcode the fan mode to linear
This is an oversight that made use of the trip-point-based fan managenent on
cards that never expose those. This led the fan to stay at fan_min.
Fortunately, the emergency code would kick when the temperature would reach
90°C.
Reported-by: Tom Englund <tomenglund26@gmail.com>
Tested-by: Tom Englund <tomenglund26@gmail.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Tested-by: Daemon32 <lnf.purple@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92126
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Linus Torvalds [Thu, 17 Dec 2015 22:05:22 +0000 (14:05 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of
people reported this... From Arnd Bergmann.
2) Don't init mutex twice in i40e driver, from Jesse Brandeburg.
3) Fix spurious EBUSY in rhashtable, from Herbert Xu.
4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas.
5) Fix race with work structure access in pppoe driver causing
corruptions, from Guillaume Nault.
6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb()
actually succeeded or not, from Sergei Shtylyov.
7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from
Bjørn Mork.
8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc.
9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo
Leitner.
10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven.
11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling
properly as well, from Jiri Benc.
12) Handle request sockets properly in xfrm layer, from Eric Dumazet.
13) Double stats update in ipv6 geneve transmit path, fix from Pravin B
Shelar.
14) sk->sk_policy[] needs RCU protection, and as a result
xfrm_policy_destroy() needs to free policies using an RCU grace
period, from Eric Dumazet.
15) SCTP needs to clone ipv6 tx options in order to avoid use after
free, from Eric Dumazet.
16) Missing kbuild export if ila.h, from Stephen Hemminger.
17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from
Tobias Klauser.
18) Validate protocol value range in ->create() methods, from Hannes
Frederic Sowa.
19) Fix early socket demux races that result in illegal dst reuse, from
Eric Dumazet.
20) Validate socket address length in pptp code, from WANG Cong.
21) skb_reorder_vlan_header() uses incorrect offset and can corrupt
packets, from Vlad Yasevich.
22) Fix memory leaks in nl80211 registry code, from Ola Olsson.
23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and
qlcnic. From Dan Carpenter.
24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for
example, AF_ALG will interpret it as an async call. From Tadeusz
Struk.
25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from
Eric Dumazet.
26) rhashtable enforces the minimum table size not early enough,
breaking how we calculate the per-cpu lock allocations. From
Herbert Xu.
27) Fix FCC port lockup in 82xx driver, from Martin Roth.
28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa.
29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and
sock_setsockopt() wrt. timestamp handling. From WANG Cong.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits)
net: check both type and procotol for tcp sockets
drivers: net: xgene: fix Tx flow control
tcp: restore fastopen with no data in SYN packet
af_unix: Revert 'lock_interruptible' in stream receive code
fou: clean up socket with kfree_rcu
82xx: FCC: Fixing a bug causing to FCC port lock-up
gianfar: Don't enable RX Filer if not supported
net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration
rhashtable: Fix walker list corruption
rhashtable: Enforce minimum size on initial hash table
inet: tcp: fix inetpeer_set_addr_v4()
ipv6: automatically enable stable privacy mode if stable_secret set
net: fix uninitialized variable issue
bluetooth: Validate socket address length in sco_sock_bind().
net_sched: make qdisc_tree_decrease_qlen() work for non mq
ser_gigaset: remove unnecessary kfree() calls from release method
ser_gigaset: fix deallocation of platform device structure
ser_gigaset: turn nonsense checks into WARN_ON
ser_gigaset: fix up NULL checks
qlcnic: fix a timeout loop
...
WANG Cong [Thu, 17 Dec 2015 07:39:04 +0000 (23:39 -0800)]
net: check both type and procotol for tcp sockets
Dmitry reported the following out-of-bound access:
Call Trace:
[<
ffffffff816cec2e>] __asan_report_load4_noabort+0x3e/0x40
mm/kasan/report.c:294
[<
ffffffff84affb14>] sock_setsockopt+0x1284/0x13d0 net/core/sock.c:880
[< inline >] SYSC_setsockopt net/socket.c:1746
[<
ffffffff84aed7ee>] SyS_setsockopt+0x1fe/0x240 net/socket.c:1729
[<
ffffffff85c18c76>] entry_SYSCALL_64_fastpath+0x16/0x7a
arch/x86/entry/entry_64.S:185
This is because we mistake a raw socket as a tcp socket.
We should check both sk->sk_type and sk->sk_protocol to ensure
it is a tcp socket.
Willem points out __skb_complete_tx_timestamp() needs to fix as well.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Thu, 17 Dec 2015 06:26:05 +0000 (22:26 -0800)]
drivers: net: xgene: fix Tx flow control
Currently the Tx flow control is based on reading the hardware state,
which is not accurate since it may not reflect the descriptors that
are not yet reached the memory.
To accurately control the Tx flow, changing it to be software based.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 16 Dec 2015 21:53:10 +0000 (13:53 -0800)]
tcp: restore fastopen with no data in SYN packet
Yuchung tracked a regression caused by commit
57be5bdad759 ("ip: convert
tcp_sendmsg() to iov_iter primitives") for TCP Fast Open.
Some Fast Open users do not actually add any data in the SYN packet.
Fixes:
57be5bdad759 ("ip: convert tcp_sendmsg() to iov_iter primitives")
Reported-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rainer Weikusat [Wed, 16 Dec 2015 20:09:25 +0000 (20:09 +0000)]
af_unix: Revert 'lock_interruptible' in stream receive code
With
b3ca9b02b00704053a38bfe4c31dbbb9c13595d0, the AF_UNIX SOCK_STREAM
receive code was changed from using mutex_lock(&u->readlock) to
mutex_lock_interruptible(&u->readlock) to prevent signals from being
delayed for an indefinite time if a thread sleeping on the mutex
happened to be selected for handling the signal. But this was never a
problem with the stream receive code (as opposed to its datagram
counterpart) as that never went to sleep waiting for new messages with the
mutex held and thus, wouldn't cause secondary readers to block on the
mutex waiting for the sleeping primary reader. As the interruptible
locking makes the code more complicated in exchange for no benefit,
change it back to using mutex_lock.
Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 17 Dec 2015 19:55:29 +0000 (11:55 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Some i915 fixes, one omap fix, one core regression fix.
Not even enough fixes for a twelve days of xmas song, which seemms
good"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: Don't overwrite UNVERFIED mode status to OK
drm/omap: fix fbdev pix format to support all platforms
drm/i915: Do a better job at disabling primary plane in the noatomic case.
drm/i915/skl: Double RC6 WRL always on
drm/i915/skl: Disable coarse power gating up until F0
drm/i915: Remove incorrect warning in context cleanup
Will Deacon [Fri, 11 Dec 2015 17:46:41 +0000 (17:46 +0000)]
locking/osq: Fix ordering of node initialisation in osq_lock
The Cavium guys reported a soft lockup on their arm64 machine, caused by
commit
c55a6ffa6285 ("locking/osq: Relax atomic semantics"):
mutex_optimistic_spin+0x9c/0x1d0
__mutex_lock_slowpath+0x44/0x158
mutex_lock+0x54/0x58
kernfs_iop_permission+0x38/0x70
__inode_permission+0x88/0xd8
inode_permission+0x30/0x6c
link_path_walk+0x68/0x4d4
path_openat+0xb4/0x2bc
do_filp_open+0x74/0xd0
do_sys_open+0x14c/0x228
SyS_openat+0x3c/0x48
el0_svc_naked+0x24/0x28
This is because in osq_lock we initialise the node for the current CPU:
node->locked = 0;
node->next = NULL;
node->cpu = curr;
and then publish the current CPU in the lock tail:
old = atomic_xchg_acquire(&lock->tail, curr);
Once the update to lock->tail is visible to another CPU, the node is
then live and can be both read and updated by concurrent lockers.
Unfortunately, the ACQUIRE semantics of the xchg operation mean that
there is no guarantee the contents of the node will be visible before
lock tail is updated. This can lead to lock corruption when, for
example, a concurrent locker races to set the next field.
Fixes:
c55a6ffa6285 ("locking/osq: Relax atomic semantics"):
Reported-by: David Daney <ddaney@caviumnetworks.com>
Reported-by: Andrew Pinski <andrew.pinski@caviumnetworks.com>
Tested-by: Andrew Pinski <andrew.pinski@caviumnetworks.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1449856001-21177-1-git-send-email-will.deacon@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>