OSDN Git Service
He Kuang [Wed, 11 Mar 2015 12:36:03 +0000 (20:36 +0800)]
perf hists browser: Fix UI bug after zoom into thread/dso/symbol
When zoom into thread/dso/symbol, the fold/unfold stat is cleared in
hists__filter_by_thread/dso/symbol(), but h->nr_rows is not cleared. So
if we toggle fold stat on the unfold entires, nr_entries got a wrong
value.
This bug can be reproduced as follows:
$ perf record -g -e syscalls:sys_enter_open ls
$ perf report
Children Self Command Shared Object Symbol
================================================================
+ 50.00% 0.00% ls ld64.so [.] _dl_get_ready_to_run
- 50.00% 0.00% ls ld64.so [.] _dl_load_shared_library
_dl_load_shared_library <= [Zoom into thread/dso]
_dl_get_ready_to_run
_start
...
In the new thread hists, all entries reset to fold, if we unfold the
same entry as we previously unfolded, nr_entries got wrong value, and we
can't move down cursor to bottom row.
Thread: ls
Children Self Command Shared Object Symbol
================================================================
+ 50.00% 0.00% ls ld64.so [.] _dl_get_ready_to_run
- 50.00% 0.00% ls ld64.so [.] _dl_load_shared_library
_dl_load_shared_library
_dl_get_ready_to_run <= [cursor may stop here, can't move down]
_start
...
This patch clear h->nr_rows to fix this bug.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426077363-855-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
He Kuang [Wed, 4 Mar 2015 10:01:42 +0000 (18:01 +0800)]
perf probe: Fix possible double free on error
A double free occurred when get source file path failed. If lr->path
failed to assign a new value, it will be freed as the old path and then
be freed again during line_range__clear(), and causes this:
$ perf probe -L do_execve -k vmlinux
*** Error in `/usr/bin/perf': double free or corruption (fasttop):
0x0000000000a9ac50 ***
======= Backtrace: =========
../lib64/libc.so.6(+0x6eeef)[0x7ffff5e44eef]
../lib64/libc.so.6(+0x78cae)[0x7ffff5e4ecae]
../lib64/libc.so.6(+0x79987)[0x7ffff5e4f987]
../bin/perf[0x4ab41f]
...
This patch fix this problem.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425463302-1687-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 10 Mar 2015 22:04:31 +0000 (19:04 -0300)]
perf tools: Output feature detection's gcc output to a file
So that we can debug feature detection problems.
It will appear on $(OUTPUT)feature-checks/.make-libbabeltrace.output,
using the libbabeltrace feature test.
Whole process:
[acme@ssdandy linux]$ make -C tools/perf install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
config/Makefile:425: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
config/Makefile:709: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ on ]
... libbabeltrace: [ OFF ]
<SNIP>
[acme@ssdandy linux]$ find tools/perf -name ".make-*.output" | grep lib | tail -5
tools/perf/config/feature-checks/.make-libdw-dwarf-unwind.output
tools/perf/config/feature-checks/.make-libbabeltrace.output
tools/perf/config/feature-checks/.make-zlib.output
tools/perf/config/feature-checks/.make-liberty.output
tools/perf/config/feature-checks/.make-liberty-z.output
[acme@ssdandy linux]$
[acme@ssdandy linux]$ cat tools/perf/config/feature-checks/.make-libbabeltrace.output
make[1]: Entering directory `/home/acme/git/linux/tools/perf/config/feature-checks'
gcc -MD -Wall -Werror -o test-libbabeltrace.bin test-libbabeltrace.c -Wl,-z,noexecstack -lbabeltrace-ctf # -lbabeltrace provided by
test-libbabeltrace.c:2:42: fatal error: babeltrace/ctf-writer/writer.h: No such file or directory
#include <babeltrace/ctf-writer/writer.h>
^
compilation terminated.
make[1]: *** [test-libbabeltrace.bin] Error 1
make[1]: Leaving directory `/home/acme/git/linux/tools/perf/config/feature-checks'
[acme@ssdandy linux]$
So the libbabeltrace feature will not be builtin, but if we do what is required for it
to be built, namely point where we have it installed:
[acme@ssdandy linux]$ time make -C tools/perf LIBBABELTRACE_DIR=/opt/libbabeltrace install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
config/Makefile:425: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ on ]
... libbabeltrace: [ on ]
... zlib: [ on ]
... DWARF post unwind library: libdw
<SNIP>
[acme@ssdandy linux]$ find tools/perf -name ".make-libbabel*.output" | grep lib | tail -5
tools/perf/config/feature-checks/.make-libbabeltrace.output
[acme@ssdandy linux]$ cat tools/perf/config/feature-checks/.make-libbabeltrace.output
make[1]: Entering directory `/home/acme/git/linux/tools/perf/config/feature-checks'
gcc -MD -I/opt/libbabeltrace/include -Wall -Werror -o test-libbabeltrace.bin test-libbabeltrace.c -Wl,-z,noexecstack -L/opt/libbabeltrace/lib -lbabeltrace-ctf # -lbabeltrace provided by
make[1]: Leaving directory `/home/acme/git/linux/tools/perf/config/feature-checks'
[acme@ssdandy linux]$
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-h53xwueqwdeeiqcv9f50nqqb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 10 Mar 2015 12:00:35 +0000 (13:00 +0100)]
perf build: Fix libbabeltrace detection
Following patch added -Werror for feature builds:
b49f1a4be701 perf tools: Improve feature test debuggability
and exposed a problem in the libbabeltrace feature build, because it was
including wrong header and gcc couldn't find the used symbol definition.
Adding proper header and keeping the old one as it is needed also
(libbabeltrace quirk).
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150310120035.GA4333@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 6 Mar 2015 07:31:29 +0000 (16:31 +0900)]
perf probe: Allow weak symbols to be probed
It currently prevents adding probes in weak symbols. But there're cases
that given name is an only weak symbol so that we cannot add probe.
$ perf probe -x /usr/lib/libc.so.6 -a calloc
Failed to find symbol calloc in /usr/lib/libc-2.21.so
Error: Failed to add events.
$ nm /usr/lib/libc.so.6 | grep calloc
000000000007b1f0 t __calloc
000000000007b1f0 T __libc_calloc
000000000007b1f0 W calloc
This change will result in duplicate probes when strong and weak symbols
co-exist in a binary. But I think it's not a big problem since probes
at the weak symbol will never be hit anyway.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150306073129.6904.41078.stgit@localhost.localdomain
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 6 Mar 2015 07:31:27 +0000 (16:31 +0900)]
perf symbols: Allow symbol alias when loading map for symbol name
When perf probe tries to add a probe in a binary using symbol name, it
sometimes failed since some symbols were discard during loading dso.
When it resolves an address to symbol, it'd be better to have just one
symbol at given address. But for finding address from symbol, it'd be
better to keep all names (including aliases).
So allow tools to state that they want to allow aliases via
symbol_conf.allow_aliases.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150306073127.6904.3232.stgit@localhost.localdomain
[ Original patch passwd allow_alias to many functions, use symbol_conf.allow_aliases instead ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 6 Mar 2015 07:31:25 +0000 (16:31 +0900)]
Revert "perf probe: Fix to fall back to find probe point in symbols"
This reverts commit
906451b98b67 ("perf probe: Fix to fall back to find probe point in symbols").
Since 'perf probe' now retries with the address of given symbol searched from
map before this path, this fall back routine isn't needed anymore.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150306073124.6904.1751.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 6 Mar 2015 07:31:22 +0000 (16:31 +0900)]
perf probe: Fix --line to handle aliased symbols in glibc
Fix perf probe --line to handle aliased symbols correctly in glibc.
This makes line_range search failing back to address-based alternative
search as same as --add and --vars.
Without this patch;
-----
# ./perf probe -x /usr/lib64/libc-2.17.so -L malloc
Specified source line is not found.
Error: Failed to show lines.
-----
With this patch;
-----
# ./perf probe -x /usr/lib64/libc-2.17.so -L malloc
<__libc_malloc@/usr/src/debug/glibc-2.17-
c758a686/malloc/malloc.c:0>
0 __libc_malloc(size_t bytes)
1 {
mstate ar_ptr;
void *victim;
__malloc_ptr_t (*hook) (size_t, const __malloc_ptr_t)
6 = force_reg (__malloc_hook);
7 if (__builtin_expect (hook != NULL, 0))
8 return (*hook)(bytes, RETURN_ADDRESS (0));
10 arena_lookup(ar_ptr);
12 arena_lock(ar_ptr, bytes);
-----
Note that this actually shows __libc_malloc, since it is the real
instance of malloc. User can use both __libc_malloc and malloc for
--line.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150306073122.6904.18540.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 6 Mar 2015 07:31:20 +0000 (16:31 +0900)]
perf probe: Fix to handle aliased symbols in glibc
Fix perf probe to handle aliased symbols correctly in glibc. In the
glibc, several symbols are defined as an alias of __libc_XXX, e.g.
malloc is an alias of __libc_malloc.
In such cases, dwarf has no subroutine instances of the alias functions
(e.g. no "malloc" instance), but the map has that symbol and its
address.
Thus, if we search the alieased symbol in debuginfo, we always fail to
find it, but it is in the map.
To solve this problem, this fails back to address-based alternative
search, which searches the symbol in the map, translates its address to
alternative (correct) function name by using debuginfo, and retry to
find the alternative function point from debuginfo.
This adds fail-back process to --vars, --lines and --add options. So,
now you can use those on malloc@libc :)
Without this patch;
-----
# ./perf probe -x /usr/lib64/libc-2.17.so -V malloc
Failed to find the address of malloc
Error: Failed to show vars.
# ./perf probe -x /usr/lib64/libc-2.17.so -a "malloc bytes"
Probe point 'malloc' not found in debuginfo.
Error: Failed to add events.
-----
With this patch;
-----
# ./perf probe -x /usr/lib64/libc-2.17.so -V malloc
Available variables at malloc
@<__libc_malloc+0>
size_t bytes
# ./perf probe -x /usr/lib64/libc-2.17.so -a "malloc bytes"
Added new event:
probe_libc:malloc (on malloc in /usr/lib64/libc-2.17.so with bytes)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc -aR sleep 1
-----
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150306073120.6904.13779.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Mar 2015 16:02:24 +0000 (13:02 -0300)]
perf ordered_events: Adopt queue() method
From perf_session, will be used in 'trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mfihndzaumx44h6y37ng2irb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Mar 2015 15:29:28 +0000 (16:29 +0100)]
perf tools: Remove superfluous thread->comm_set setting
It is set by calling thread__set_comm right before the removed line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1425396581-17716-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Mar 2015 15:37:54 +0000 (12:37 -0300)]
perf tools: tool->finished_round() doesn't need perf_session
It is all about flushing the ordered queue or piping it thru, no need
for a perf_session pointer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-g47fx3ys0t9271cp0dcabjc7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Mar 2015 15:20:38 +0000 (12:20 -0300)]
perf ordered_events: Allow tools to specify a deliver method
So that we can simplify the deliver method to pass just:
(ordered_events, ordered_event, sample);
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j0s4bpxs5qza5tnkvjwom9rw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Mar 2015 14:58:45 +0000 (11:58 -0300)]
perf ordered_events: Shorten function signatures
By keeping pointers to machines, evlist and tool in ordered_events.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0c6huyaf59mqtm2ek9pmposl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Mar 2015 14:48:12 +0000 (11:48 -0300)]
perf ordered_events: Untangle from perf_session
For use by tools that are not perf.data based, as maybe 'perf trace' in
live mode.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nedqe7cmii5w82etfi36urfz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Tue, 3 Mar 2015 06:17:53 +0000 (07:17 +0100)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Warn if given uprobe event accesses memory on older kernel (Masami Hiramatsu)
- 'perf record' Documentation fixes (Namhyung Kim)
- Report unsupported events properly in 'perf stat' (Suzuki K. Poulose)
Infrastructure changes:
- Avoid FORK after COMM when synthesizing records for pre-existing threads (Arnaldo Carvalho de Melo)
- Reference count struct thread (Arnaldo Carvalho de Melo)
- Don't keep the session around in 'perf sched', thread refcounting removes that need (Arnaldo Carvalho de Melo)
- Initialize cpu set in pthread_attr_setaffinity_np() feature test (Adrian Hunter)
- Only include tsc file for x86 (David Ahern)
- Compare JOBS to 0 after grep (David Ahern)
- Improve feature detection messages (Ingo Molnar)
- Revert "perf: Remove the extra validity check on nr_pages" (Kan Liang)
- Remove bias offset to find probe point by address (Masami Hiramatsu)
- Fix build error on ARCH=i386/x86_64/sparc64 (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo Carvalho de Melo [Tue, 3 Mar 2015 01:28:41 +0000 (22:28 -0300)]
perf sched: No need to keep the session around
We were keeping the session around just because we kept pointers to
struct thread instances, but now we reference count them, so no need
for deferring the perf_session__delete call to after we traverse the
work_list entries.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9agtck6jdr3rebdp39z1lo0e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Mar 2015 01:21:35 +0000 (22:21 -0300)]
perf tools: Reference count struct thread
We need to do that to stop accumulating entries in the dead_threads
linked list, i.e. we were keeping references to threads in struct hists
that continue to exist even after a thread exited and was removed from
the machine threads rbtree.
We still keep the dead_threads list, but just for debugging, allowing us
to iterate at any given point over the threads that still are referenced
by things like struct hist_entry.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3ejvfyed0r7ue61dkurzjux4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kan Liang [Mon, 2 Mar 2015 07:14:26 +0000 (02:14 -0500)]
Revert "perf: Remove the extra validity check on nr_pages"
This reverts commit
74390aa55678 ("perf: Remove the extra validity check
on nr_pages")
nr_pages equals to number of pages - 1 in perf_mmap. So nr_pages = 0 is
valid.
So the nr_pages != 0 && !is_power_of_2(nr_pages) are all
needed for checking. Otherwise, for example, perf test 6 failed.
# perf test 6
6: x86 rdpmc test :Error:
mmap() syscall returned with (Invalid argument)
FAILED!
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1425280466-7830-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Mon, 2 Mar 2015 07:59:05 +0000 (09:59 +0200)]
perf tools: Initialize cpu set in pthread_attr_setaffinity_np feature test
Feature tests are compiled but not executed, however it might avoid a
future uninitialized variable warning, so initialize the cpu set.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/54F41849.1010906@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Mon, 2 Mar 2015 12:49:46 +0000 (21:49 +0900)]
perf probe: Remove bias offset to find probe point by address
Remove bias offset to find probe point by address.
Without this patch, probe points on kernel and executables are shown
correctly, but do not work with libraries:
# ./perf probe -l
probe:do_fork (on do_fork@kernel/fork.c)
probe_libc:malloc (on malloc in /usr/lib64/libc-2.17.so)
probe_perf:strlist__new (on strlist__new@util/strlist.c in /home/mhiramat/ksrc/linux-3/tools/perf/perf)
Removing bias allows it to show it as real place:
# ./perf probe -l
probe:do_fork (on do_fork@kernel/fork.c)
probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.17.so)
probe_perf:strlist__new (on strlist__new@util/strlist.c in /home/mhiramat/ksrc/linux-3/tools/perf/perf)
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150302124946.9191.64085.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Sat, 28 Feb 2015 02:53:29 +0000 (11:53 +0900)]
perf probe: Warn if given uprobe event accesses memory on older kernel
Warn if given uprobe event accesses memory on older kernel.
Until 3.14, uprobe event only supports accessing registers so this warns
to upgrade kernel if uprobe-event returns -EINVAL and an argument of the
event accesses memory ($stack, @+offset, and +|-offs() symtax).
With this patch (on 3.10.0-123.13.2.el7.x86_64);
-----
# ./perf probe -x ./perf warn_uprobe_event_compat stack=-0\(%sp\)
Added new event:
Failed to write event: Invalid argument
Please upgrade your kernel to at least 3.14 to have access to feature -0(%sp)
Error: Failed to add events.
-----
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20150228025329.32106.70581.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Sat, 28 Feb 2015 09:18:49 +0000 (10:18 +0100)]
perf tools: Improve 'libbabel' feature check failure message
On Debian-ish systems libbabeltrace-dev should be suggested as a package
install as well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150228091849.GA28959@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Sat, 28 Feb 2015 09:16:27 +0000 (10:16 +0100)]
perf tools: Improve feature test debuggability
Certain feature tests fail with link errors:
triton:~/tip/tools/perf/config/feature-checks> make test-libbabeltrace.bin
gcc -MD -o test-libbabeltrace.bin test-libbabeltrace.c # -lbabeltrace provided by
/tmp/cc6dRSqd.o: In function `main':
test-libbabeltrace.c:(.text+0xf): undefined reference to `bt_ctf_stream_class_get_packet_context_type'
although they should already fail with a build error due to lack of a
proper prototype for the function. Due to this I first tried to find
which library was missing - while it was the whole feature that was
missing from the .h file already.
To solve this, propagate -Wall -Werror to all testcases and remove them
from testcase Makefile rules that used them explicitly.
A missing feature now outputs:
triton:~/tip/tools/perf/config/feature-checks> make test-libbabeltrace.bin
gcc -MD -Wall -Werror -o test-libbabeltrace.bin test-libbabeltrace.c # -lbabeltrace provided by
test-libbabeltrace.c: In function ‘main’:
test-libbabeltrace.c:6:2: error: implicit declaration of function ‘bt_ctf_stream_class_get_packet_context_type’ [-Werror=implicit-function-declaration]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150228091627.GF31887@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Sat, 28 Feb 2015 08:46:42 +0000 (09:46 +0100)]
perf tools: Improve libbfd detection message
Before:
No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling
After:
No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling
Change the message to the standard 'please install' language and also
add libiberty-dev suggestion for Ubuntu systems.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150228084610.GE31887@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Sat, 28 Feb 2015 08:39:09 +0000 (09:39 +0100)]
perf tools: Improve libperl detection message
Before:
Missing perl devel files. Disabling perl scripting support, consider installing perl-ExtUtils-Embed
After:
Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev
Change the message to the standard 'please install' language and
adds Debian-ish package suggestion.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150228083909.GC31887@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Sat, 28 Feb 2015 08:33:45 +0000 (09:33 +0100)]
perf tools: Improve Python feature detection messages
Change the Python detection message from:
config/Makefile:566: No python-config tool was found
config/Makefile:566: Python support will not be built
config/Makefile:565: No 'python-config' tool was found: disables Python support - please install python-devel/python-dev
It's now a standard one-line message with a package install suggestion,
and it also uses the standard language used by other feature detection
messages.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150228083345.GB31887@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Sat, 28 Feb 2015 08:17:50 +0000 (09:17 +0100)]
perf tools: Remove annoying extra message from the features build
This message:
Makefile:153: The path 'python-config' is not executable.
Appears on every perf build that does not have a sufficient python
environment installed. It's really just an internal detail of python
configuration pass and users should not see it - and it's pretty
meaningless to them in any case because the message is not very helpful.
(So it's not executable. Why does that matter? What can the user do
about it?)
Remove the warning, the missing python feature warning is sufficient:
config/Makefile:566: No python-config tool was found
config/Makefile:566: Python support will not be built
although even that one isn't very helpful to users: so no Python support
will be built, what can the user do to fix that? Most other such
warnings give package install suggestions.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150228081750.GA31887@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Sat, 28 Feb 2015 08:12:48 +0000 (09:12 +0100)]
perf tools: Add PERF-FEATURES to the .gitignore file
It's an auto-generated file.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150228081248.GA31856@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 2 Mar 2015 03:13:33 +0000 (12:13 +0900)]
perf record: Document --group option
The 'perf record --group' option lacks documentation and confuses users.
As -e/--event option already supports group spec, it should not be used
anymore.
Also add a short description of event group itself.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1425266013-5034-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 2 Mar 2015 04:53:58 +0000 (13:53 +0900)]
perf record: Get rid of -l option from Documentation
The perf record does not support -l option anymore, so nuke it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1425272038-10406-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 2 Mar 2015 04:31:03 +0000 (13:31 +0900)]
perf tools: Fix build error on ARCH=i386/x86_64/sparc64
He Kuang reported that current perf tools failed to build when ARCH
variable was given like above.
It was because the name is different that internal directory name. I
can see that David's sparc64 build has same problem.
So fix it by applying the sed conversion script to the command line ARCH
variable also, and fixing the converted name there (i.e. i386/x86_64 ->
x86, sparc64 -> sparc).
Reported-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: He Kuang <hekuang@huawei.com>
Acked: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1425270663-10215-1-git-send-email-namhyung@kernel.org
[ Resolved conflict with
4861f87cd3d1 "Make sparc64 arch point to sparc" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 27 Feb 2015 22:52:10 +0000 (19:52 -0300)]
perf tools: Fix FORK after COMM when synthesizing records for pre-existing threads
In this commit:
commit
363b785f3805a2632eb09a8b430842461c21a640
Author: Don Zickus <dzickus@redhat.com>
Date: Fri Mar 14 10:43:44 2014 -0400
perf tools: Speed up thread map generation
We ended up emitting PERF_RECORD_FORK events after their corresponding
PERF_RECORD_COMM, so the code below will remove the "existing thread"
and then recreates it, unnecessarily:
[root@ssdandy ~]# perf probe -x ~/bin/perf -L machine__process_fork_event
<machine__process_fork_event@/home/acme/git/linux/tools/perf/util/machine.c:0>
0 int machine__process_fork_event(struct machine *machine, union perf_event *event,
struct perf_sample *sample)
2 {
3 struct thread *thread = machine__find_thread(machine,
event->fork.pid,
event->fork.tid);
6 struct thread *parent = machine__findnew_thread(machine,
event->fork.ppid,
event->fork.ptid);
/* if a thread currently exists for the thread id remove it */
if (thread != NULL)
12 machine__remove_thread(machine, thread);
14 thread = machine__findnew_thread(machine, event->fork.pid,
event->fork.tid);
16 if (dump_trace)
17 perf_event__fprintf_task(event, stdout);
19 if (thread == NULL || parent == NULL ||
20 thread__fork(thread, parent, sample->time) < 0) {
21 dump_printf("problem processing PERF_RECORD_FORK, skipping event.\n");
22 return -1;
}
25 return 0;
26 }
[root@ssdandy ~]# perf probe -x ~/bin/perf fork_after_comm=machine__process_fork_event:12
Added new event:
probe_perf:fork_after_comm (on machine__process_fork_event:12 in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:fork_after_comm -aR sleep 1
[root@ssdandy ~]#
[root@ssdandy ~]# perf record -g -e probe_perf:* trace -o /tmp/bla
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.021 MB perf.data (30 samples) ]
Terminated
[root@ssdandy ~]#
[root@ssdandy ~]# perf report --no-children --show-total-period --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Samples: 30 of event 'probe_perf:fork_after_comm'
# Event count (approx.): 30
#
# Overhead Period Command Shared Object Symbol
# ........ ............ ....... ............. ...............................
#
100.00% 30 trace trace [.] machine__process_fork_event
|
---machine__process_fork_event
__event__synthesize_thread.part.2
perf_event__synthesize_threads
cmd_trace
main
__libc_start_main
[root@ssdandy ~]#
And Looking at 'perf report -D' output we see it:
0 0 0x8698 [0x30]: PERF_RECORD_COMM: auditd:703/707
0 0 0x86c8 [0x38]: PERF_RECORD_FORK(703:707):(703:703)
Fix it by more closely mimicking how the kernel generates those records
when a new fork happens, i.e. first a PERF_RECORD_FORK, then a
PERF_RECORD_COMM.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-h0emvymi2t3mw8dlqd6d6z73@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Suzuki K. Poulose [Fri, 13 Feb 2015 18:40:58 +0000 (18:40 +0000)]
perf stat: Report unsupported events properly
Commit
1971f59 (perf stat: Use read_counter in read_counter_aggr )
broke the perf stat output for unsupported counters.
$ perf stat -v -a -C 0 -e CCI_400/config=24/ sleep 1
Warning:
CCI_400/config=24/ event is not supported by the kernel.
Performance counter stats for 'system wide':
0 CCI_400/config=24/
1.
080265400 seconds time elapsed
Where it used to be :
$ perf stat -v -a -C 0 -e CCI_400/config=24/ sleep 1
Warning:
CCI_400/config=24/ event is not supported by the kernel.
Performance counter stats for 'system wide':
<not supported> CCI_400/config=24/
1.
083840675 seconds time elapsed
This patch fixes the issues by checking if the counter is supported,
before reading and logging the counter value.
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1423852858-8455-1-git-send-email-suzuki.poulose@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Wed, 18 Feb 2015 23:59:31 +0000 (18:59 -0500)]
perf tools: Compare JOBS to 0 after grep
If JOBS is not by user perf tries to autodetect the number by grepping
the number of CPUs from /proc/cpuinfo. 'grep -c' will always return an
integer so after this command JOBS should be compared to 0, not "".
Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1424303971-91904-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Thu, 19 Feb 2015 18:22:33 +0000 (13:22 -0500)]
perf tools: Only include tsc file for x86
The perf_time_to_tsc and tsc_to_perf_time functions are only used for x86.
Make inclusion of tsc.c dependent on x86 as well.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1424370153-128274-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 2 Mar 2015 14:45:49 +0000 (11:45 -0300)]
Merge 'tip/perf/urgent' into perf/core to pick fixes
Needed to build perf/core buildable in some cases.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Sun, 1 Mar 2015 16:41:42 +0000 (17:41 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- pthread_attr_setaffinity_np() feature detection build fixes (Adrian Hunter, Josh Boyer)
- Fix probing for PERF_FLAG_FD_CLOEXEC flag (Adrian Hunter)
- Fix order of arguments to memcpy_alloc_mem in 'perf bench' (Bruce Merry)
- Sparc64 and Aarch64 build and segfault fixes (David Ahern)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 28 Feb 2015 07:12:16 +0000 (08:12 +0100)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Fix SIGBUS failures due to misaligned accesses in Sparc64 (David Ahern)
- Fix branch stack mode in 'perf report' (He Kuang)
- Fix a 'perf probe' operator precedence bug (He Kuang)
- Fix Support for different binaries with same name in 'perf diff' (Kan Liang)
- Check kprobes blacklist when adding new events via 'perf probe' (Masami Hiramatsu)
- Add --purge FILE to remove all caches of FILE in 'perf buildid-cache' (Masami Hiramatsu)
- Show usage with some incorrect params (Masami Hiramatsu)
- Add new buildid cache if update target is not cached in 'buildid-cache' (Masami Hiramatsu)
- Allow listing events with 'tracepoint' prefix in 'perf list' (Yunlong Song)
- Sort the output of 'perf list' (Yunlong Song)
- Fix bash completion of 'perf --' (Yunlong Song)
Developer Zone:
- Handle strdup() failure path in 'perf probe' (Arnaldo Carvalho de Melo)
- Fix get_real_path to free allocated memory in error path in 'perf probe' (Masami Hiramatsu)
- Use pr_debug instead of verbose && pr_info perf buildid-cache (Masami Hiramatsu)
- Fix building of 'perf data' with some gcc versions due to incorrect array struct
entry (Yunlong Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
He Kuang [Sun, 15 Feb 2015 02:33:37 +0000 (10:33 +0800)]
perf report: Fix branch stack mode cannot be set
When perf.data file is obtained using 'perf record -b', perf report
should use branch stack mode to generate output. But this function is
broken by improper comparison between boolean and constant -1.
before this patch:
$ perf report -b -i perf.data
Samples: 16 of event 'cycles', Event count (approx.):
3171896
Overhead Command Shared Object Symbol
13.59% ls [kernel.kallsyms] [k] prio_tree_remove
13.16% ls [kernel.kallsyms] [k] change_pte_range
12.09% ls [kernel.kallsyms] [k] page_fault
12.02% ls [kernel.kallsyms] [k] zap_pte_range
...
after this patch:
$ perf report -b -i perf.data
Samples: 256 of event 'cycles', Event count (approx.): 256
Overhead Command Source Shared Object Source Symbol Target Shared Object Target Symbol
9.38% ls [unknown] [k]
0000000000000000 [unknown] [k]
0000000000000000
6.25% ls libc-2.19.so [.] _dl_addr libc-2.19.so [.] _dl_addr
6.25% ls [kernel.kallsyms] [k] zap_pte_range [kernel.kallsyms] [k] zap_pte_range
6.25% ls [kernel.kallsyms] [k] change_pte_range [kernel.kallsyms] [k] change_pte_range
0.39% ls [kernel.kallsyms] [k] prio_tree_remove [kernel.kallsyms] [k] prio_tree_remove
...
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1423967617-28879-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 27 Feb 2015 04:50:31 +0000 (13:50 +0900)]
perf buildid-cache: Show usage with incorrect params
Show usage if no action is specified or unexpected parameter is given.
In other words, be more user friendly.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150227045030.1999.44006.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 27 Feb 2015 04:50:28 +0000 (13:50 +0900)]
perf buildid-cache: Use pr_debug instead of verbose && pr_info
Use pr_debug instead of the combination of verbose and pr_info.
"if (verbose) pr_info(...)" is same as "pr_debug(...)", replace it.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150227045028.1999.93137.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 27 Feb 2015 04:50:26 +0000 (13:50 +0900)]
perf buildid-cache: Add --purge FILE to remove all caches of FILE
Add --purge FILE to remove all caches of FILE.
Since the current --remove FILE removes a cache which has
same build-id of given FILE. Since the command takes a
FILE path, it can confuse user who tries to remove cache
about FILE path.
-----
# ./perf buildid-cache -v --add ./perf
Adding
133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok
# (update the ./perf binary)
# ./perf buildid-cache -v --remove ./perf
Removing
305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL
./perf wasn't in the cache
-----
Actually, the --remove's FAIL is not shown, it just silently fails.
So, this patch adds --purge FILE action for such usecase.
perf buildid-cache --purge FILE removes all caches which has same FILE
path.
In other words, it removes all caches including old binaries.
-----
# ./perf buildid-cache -v --add ./perf
Adding
133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok
# (update the ./perf binary)
# ./perf buildid-cache -v --purge ./perf
Removing
133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok
-----
BTW, if you want to purge all the caches, remove ~/.debug/* .
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain
[ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yunlong Song [Fri, 27 Feb 2015 10:21:31 +0000 (18:21 +0800)]
perf tools: Fix the bash completion problem of 'perf --*'
The perf-completion.sh uses a predefined string '--help --version
--exec-path --html-path --paginate --no-pager --perf-dir --work-tree
--debugfs-dir' for the bash completion of 'perf --*', which has two
problems:
Problem 1: If the options of perf are changed (see handle_options() in
perf.c), the perf-completion.sh has to be changed at the same time. If
not, the bash completion of 'perf --*' and the options which perf
really supports will be inconsistent.
Problem 2: When typing another single character after 'perf --', e.g.
'h', and hit TAB key to get the bash completion of 'perf --h', the
character 'h' disappears at once. This is not what we want, we wish the
bash completion can return '--help --html-path' and then we can
continue to choose one.
To solve this problem, we add '--list-opts' to perf, which now supports
'perf --list-opts' directly, and its result can be used in bash
completion now.
Example:
Before this patch:
$ perf --h <-- hit TAB key after character 'h'
$ perf -- <-- 'h' disappears and no required result
After this patch:
$ perf --h <-- hit TAB key after character 'h'
--help --html-path <-- the required result
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yunlong Song [Fri, 27 Feb 2015 10:21:28 +0000 (18:21 +0800)]
perf list: Extend raw-dump to certain kind of events
Extend 'perf list --raw-dump' to 'perf list --raw-dump [hw|sw|cache
|tracepoint|pmu|event_glob]' in order to show the raw-dump of a certain
kind of events rather than all of the events.
Example:
Before this patch:
$ perf list --raw-dump hw
branch-instructions branch-misses bus-cycles cache-misses
cache-references cpu-cycles instructions stalled-cycles-backend
stalled-cycles-frontend
alignment-faults context-switches cpu-clock cpu-migrations
emulation-faults major-faults minor-faults page-faults task-clock
...
...
writeback:writeback_thread_start writeback:writeback_thread_stop
writeback:writeback_wait_iff_congested
writeback:writeback_wake_background writeback:writeback_wake_thread
As shown above, all of the events are printed.
After this patch:
$ perf list --raw-dump hw
branch-instructions branch-misses bus-cycles cache-misses
cache-references cpu-cycles instructions stalled-cycles-backend
stalled-cycles-frontend
As shown above, only the hw events are printed.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yunlong Song [Fri, 27 Feb 2015 10:21:27 +0000 (18:21 +0800)]
perf list: Clean up the printing functions of hardware/software events
Do not need print_events_type or __print_events_type for listing hw/sw
events, let print_symbol_events do its job instead. Moreover,
print_symbol_events can also handle event_glob and name_only.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yunlong Song [Fri, 27 Feb 2015 10:21:30 +0000 (18:21 +0800)]
perf tools: Remove the '--(null)' long_name for --list-opts
If the long_name of a 'struct option' is defined as NULL, --list-opts
will incorrectly print '--(null)' in its output. As a result, '--(null)'
will finally appear in the case of bash completion, e.g. 'perf record
--'.
Example:
Before this patch:
$ perf record --list-opts
--event --filter --pid --tid --realtime --no-buffering --raw-samples
--all-cpus --cpu --count --output --no-inherit --freq --mmap-pages
--group --(null) --call-graph --verbose --quiet --stat --data
--timestamp --period --no-samples --no-buildid-cache --no-buildid
--cgroup --delay --uid --branch-any --branch-filter --weight
--transaction --per-thread --intr-regs
After this patch:
$ perf record --list-opts
--event --filter --pid --tid --realtime --no-buffering --raw-samples
--all-cpus --cpu --count --output --no-inherit --freq --mmap-pages
--group --call-graph --verbose --quiet --stat --data --timestamp
--period --no-samples --no-buildid-cache --no-buildid --cgroup --delay
--uid --branch-any --branch-filter --weight --transaction --per-thread
--intr-regs
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yunlong Song [Fri, 27 Feb 2015 10:21:29 +0000 (18:21 +0800)]
perf list: Avoid confusion of perf output and the next command prompt
Distinguish the output of 'perf list --list-opts' or 'perf --list-cmds'
with the next command prompt, which also happens in other cases (e.g.
record, report ...).
Example:
Before this patch:
$perf list --list-opts
--raw-dump $ <-- the output and the next command prompt are at
the same line
After this patch:
$perf list --list-opts
--raw-dump
$ <-- the new line
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yunlong Song [Fri, 27 Feb 2015 10:21:26 +0000 (18:21 +0800)]
perf list: Allow listing events with 'tracepoint' prefix
If somebody happens to name an event with the beginning of 'tracepoint'
(e.g. tracepoint_foo), then it will never be showed with perf list
event_glob, thus we parse the argument 'tracepoint' more carefully for
accuracy.
Example:
Before this patch:
$ perf list tracepoint_foo:*
jbd2:jbd2_start_commit [Tracepoint event]
jbd2:jbd2_commit_locking [Tracepoint event]
jbd2:jbd2_run_stats [Tracepoint event]
block:block_rq_issue [Tracepoint event]
block:block_bio_complete [Tracepoint event]
block:block_bio_backmerge [Tracepoint event]
block:block_getrq [Tracepoint event]
... ...
As shown above, all of the tracepoint events are printed. In fact, the
command's real intention is to print the events of tracepoint_foo.
After this patch:
$ perf list tracepoint_foo:*
tracepoint_foo:tp_foo_enter [Tracepoint event]
tracepoint_foo:tp_foo_exit [Tracepoint event]
As shown above, only the events of tracepoint_foo are printed.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yunlong Song [Fri, 27 Feb 2015 10:21:25 +0000 (18:21 +0800)]
perf list: Sort the output of 'perf list' to view more clearly
Sort the output according to ASCII character list (using strcmp), which
supports both number sequence and alphabet sequence.
Example:
Before this patch:
$ perf list
List of pre-defined events (to be used in -e):
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
cache-references [Hardware event]
cache-misses [Hardware event]
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
... ...
jbd2:jbd2_start_commit [Tracepoint event]
jbd2:jbd2_commit_locking [Tracepoint event]
jbd2:jbd2_run_stats [Tracepoint event]
block:block_rq_issue [Tracepoint event]
block:block_bio_complete [Tracepoint event]
block:block_bio_backmerge [Tracepoint event]
block:block_getrq [Tracepoint event]
... ...
After this patch:
$ perf list
List of pre-defined events (to be used in -e):
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
... ...
block:block_bio_backmerge [Tracepoint event]
block:block_bio_complete [Tracepoint event]
block:block_getrq [Tracepoint event]
block:block_rq_issue [Tracepoint event]
jbd2:jbd2_commit_locking [Tracepoint event]
jbd2:jbd2_run_stats [Tracepoint event]
jbd2:jbd2_start_commit [Tracepoint event]
... ...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-2-git-send-email-yunlong.song@huawei.com
[ Don't forget closedir({sys,evt}_dir) when handling errors ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yunlong Song [Fri, 27 Feb 2015 11:53:46 +0000 (19:53 +0800)]
perf data: Fix sentinel setting for data_cmds array
The recent new patch "perf tools: Add new 'perf data' command" (commit
2245bf14 in acme's git repo perf/core) has caused a building error when
compiling the source code of perf:
cc1: warnings being treated as errors
builtin-data.c:89: error: missing initializer
builtin-data.c:89: error: (near initialization for ‘data_cmds[1].summary’)
make[2]: *** [builtin-data.o] Error 1
make[2]: *** Waiting for unfinished jobs....
LD bench/perf-in.o
LD tests/perf-in.o
make[1]: *** [perf-in.o] Error 2
make: *** [all] Error 2
This patch fixes the building error above.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425038026-27604-1-git-send-email-yunlong.song@huawei.com
[ .name == NULL ends the loop, use it instead of seting all fields to NULL ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
He Kuang [Fri, 27 Feb 2015 10:52:53 +0000 (18:52 +0800)]
perf probe: Fix a precedence bug
The minus operator has higher precedence than ?: Add parentheses around
?: fix this.
Before this patch:
$ echo 'p:myprobe do_sys_open' > /sys/kernel/debug/tracing/kprobe_events
$ perf probe -l -k ../vmlinux
kprobes:myprobe (on do_sys_open)
After this patch:
$ echo 'p:myprobe do_sys_open' > /sys/kernel/debug/tracing/kprobe_events
$ perf probe -l -k ../vmlinux
kprobes:myprobe (on do_sys_open@linux.git/fs/open.c)
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425034373-14511-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kan Liang [Mon, 9 Feb 2015 05:39:44 +0000 (05:39 +0000)]
perf diff: Support for different binaries
Currently, the perf diff only works with same binaries. That's because
it compares the symbol start address. It doesn't work if the perf.data
comes from different binaries. This patch matches the symbol names.
Actually, perf diff once intended to compare the symbol names. The
commit as below can look for a pair by name.
604c5c92972d (perf diff: Change the default sort order to "dso,symbol")
However, at that time, perf diff used a global list of dsos. That means
the binaries which has same name can only be loaded once. That's a
problem for comparing different binaries.
For example, we have an old binary and an updated binary. They very
likely have same name and most of the functions, so only dsos from old
binary will be loaded. When processing the data from updated binary,
perf still use the symbol information from old binary. That's wrong.
Then the commit as below used IP to replace symbol name.
9c443dfdd31e ("perf diff: Fix support for all --sort combinations")
>From that time, perf diff starts to compare the symbol address.
The global dsos is discarded from a patch in 2010.
a1645ce12adb ("perf: 'perf kvm' tool for monitoring guest performance
from host")
However, at that time, perf diff already compared by address. So perf
diff cannot work for different binaries as well.
This patch actually rolls back the perf diff to original design. The
document is also changed, so everybody knows the original design is to
compare the symbol names.
Here are some examples:
The only difference between example_v1.c and example_v2.c is the
location of f2 and f3. There is no change in behavior, but the previous
perf diff display the wrong differential profile.
example_v1.c
noinline void f3(void)
{
volatile int i;
for (i = 0; i < 10000;) {
if(i%2)
i++;
else
i++;
}
}
noinline void f2(void)
{
volatile int a = 100, b, c;
for (b = 0; b < 10000; b++)
c = a * b;
}
noinline void f1(void)
{
f2();
f3();
}
int main()
{
int i;
for (i = 0; i < 100000; i++)
f1();
}
example_v2.c
noinline void f2(void)
{
volatile int a = 100, b, c;
for (b = 0; b < 10000; b++)
c = a * b;
}
noinline void f3(void)
{
volatile int i;
for (i = 0; i < 10000;) {
if(i%2)
i++;
else
i++;
}
}
noinline void f1(void)
{
f2();
f3();
}
int main()
{
int i;
for (i = 0; i < 100000; i++)
f1();
}
[lk@localhost perf_diff]$ gcc example_v1.c -o example
[lk@localhost perf_diff]$ perf record -o example_v1.data ./example
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.813 MB example_v1.data (~35522 samples) ]
[lk@localhost perf_diff]$ gcc example_v2.c -o example
[lk@localhost perf_diff]$ perf record -o example_v2.data ./example
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.824 MB example_v2.data (~36015 samples) ]
Old perf diff result:
[lk@localhost perf_diff]$ perf diff example_v1.data example_v2.data
Event 'cycles'
Baseline Delta Shared Object Symbol
........ ....... ................ ...............................
[kernel.vmlinux] [k] __perf_event_task_sched_out
0.00% [kernel.vmlinux] [k] apic_timer_interrupt
[kernel.vmlinux] [k] idle_cpu
[kernel.vmlinux] [k] intel_pstate_timer_func
[kernel.vmlinux] [k] native_read_msr_safe
0.00% [kernel.vmlinux] [k] native_read_tsc
0.00% [kernel.vmlinux] [k] native_write_msr_safe
[kernel.vmlinux] [k] ntp_tick_length
0.00% [kernel.vmlinux] [k] rb_erase
0.00% [kernel.vmlinux] [k] tick_sched_timer
0.00% [kernel.vmlinux] [k] unmap_single_vma
0.00% [kernel.vmlinux] [k] update_wall_time
0.00% example [.] f1
46.24% example [.] f2
53.71% -7.55% example [.] f3
+53.81% example [.] f3
0.02% example [.] main
New perf diff result:
[lk@localhost perf_diff]$ perf diff example_v1.data example_v2.data
[kernel.vmlinux] [k] __perf_event_task_sched_out
0.00% [kernel.vmlinux] [k] apic_timer_interrupt
[kernel.vmlinux] [k] idle_cpu
[kernel.vmlinux] [k] intel_pstate_timer_func
[kernel.vmlinux] [k] native_read_msr_safe
0.00% [kernel.vmlinux] [k] native_read_tsc
0.00% [kernel.vmlinux] [k] native_write_msr_safe
[kernel.vmlinux] [k] ntp_tick_length
0.00% [kernel.vmlinux] [k] rb_erase
0.00% [kernel.vmlinux] [k] tick_sched_timer
0.00% [kernel.vmlinux] [k] unmap_single_vma
0.00% [kernel.vmlinux] [k] update_wall_time
0.00% example [.] f1
46.24% -0.08% example [.] f2
53.71% +0.11% example [.] f3
0.02% example [.] main
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1423460384-11645-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Thu, 26 Feb 2015 06:54:40 +0000 (15:54 +0900)]
perf buildid-cache: Add new buildid cache if update target is not cached
Add new buildid cache if the update target file is not cached.
This can happen when an old binary is replaced by new one after caching
the old one. In this case, user sees his operation just failed.
But it does not look straight, since user just pass the binary "path",
not "build-id".
----
# ./perf buildid-cache --add ./perf
(update ./perf to new binary)
# ./perf buildid-cache --update ./perf
./perf wasn't in the cache
#
----
This patch adds given new binary to cache if the new binary is
not cached. So we'll not see the above error.
----
# ./perf buildid-cache --add ./perf
(update ./perf to new binary)
# ./perf buildid-cache --update ./perf
#
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150226065440.23912.1494.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 26 Feb 2015 14:47:18 +0000 (11:47 -0300)]
perf probe: Handle strdup() failure
We could end up returning 0 (Ok) with a NULL raw_path. Fix it.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Link: http://lkml.kernel.org/n/tip-l0kcbcg5f4nnzqt01cv42vec@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Thu, 26 Feb 2015 08:25:04 +0000 (17:25 +0900)]
perf probe: Fix get_real_path to free allocated memory in error path
Fix get_real_path to free allocated memory when comp_dir is used for
complementing path and getting an error.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150226082504.28125.74506.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Thu, 19 Feb 2015 14:31:13 +0000 (23:31 +0900)]
perf probe: Check kprobes blacklist when adding new events
Recent linux kernel provides a blacklist of the functions which can not
be probed. perf probe can now check this blacklist before setting new
events and indicate better error message for users.
Without this patch,
----
# perf probe --add vmalloc_fault
Added new event:
Failed to write event: Invalid argument
Error: Failed to add events.
----
With this patch
----
# perf probe --add vmalloc_fault
Added new event:
Warning: Skipped probing on blacklisted function: vmalloc_fault
----
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150219143113.14434.5387.stgit@localhost.localdomain
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Thu, 19 Feb 2015 20:00:22 +0000 (15:00 -0500)]
perf trace: Fix SIGBUS failures due to misaligned accesses
On Sparc64 perf-trace is failing in many spots due to extended load
instructions being used on misaligned accesses.
(gdb) run trace ls
Starting program: /tmp/perf/perf trace ls
[Thread debugging using libthread_db enabled]
Detaching after fork from child process 169460.
<ls output removed>
Program received signal SIGBUS, Bus error.
0x000000000014f4dc in tp_field__u64 (field=0x4cc700, sample=0x7feffffa098) at builtin-trace.c:61
warning: Source file is more recent than executable.
61 TP_UINT_FIELD(64);
(gdb) bt
0 0x000000000014f4dc in tp_field__u64 (field=0x4cc700, sample=0x7feffffa098) at builtin-trace.c:61
1 0x0000000000156ad4 in trace__sys_exit (trace=0x7feffffc268, evsel=0x4cc580, event=0xfffffc0104912000,
sample=0x7feffffa098) at builtin-trace.c:1701
2 0x0000000000158c14 in trace__run (trace=0x7feffffc268, argc=1, argv=0x7fefffff360) at builtin-trace.c:2160
3 0x000000000015b78c in cmd_trace (argc=1, argv=0x7fefffff360, prefix=0x0) at builtin-trace.c:2609
4 0x0000000000107d94 in run_builtin (p=0x4549c8, argc=2, argv=0x7fefffff360) at perf.c:341
5 0x0000000000108140 in handle_internal_command (argc=2, argv=0x7fefffff360) at perf.c:400
6 0x0000000000108308 in run_argv (argcp=0x7feffffef2c, argv=0x7feffffef20) at perf.c:444
7 0x0000000000108728 in main (argc=2, argv=0x7fefffff360) at perf.c:559
(gdb) p *sample
$1 = {ip =
4391276, pid = 169472, tid = 169472, time =
6303014583281250, addr = 0, id = 72082,
stream_id =
18446744073709551615, period = 1, weight = 0, transaction = 0, cpu = 73, raw_size = 36,
data_src =
84410401, flags = 0, insn_len = 0, raw_data = 0xfffffc010491203c, callchain = 0x0,
branch_stack = 0x0, user_regs = {abi = 0, mask = 0, regs = 0x0, cache_regs = 0x7feffffa098, cache_mask = 0},
intr_regs = {abi = 0, mask = 0, regs = 0x0, cache_regs = 0x7feffffa098, cache_mask = 0}, user_stack = {
offset = 0, size = 0, data = 0x0}, read = {time_enabled = 0, time_running = 0, {group = {nr = 0,
values = 0x0}, one = {value = 0, id = 0}}}}
(gdb) p *field
$2 = {offset = 16, {integer = 0x14f4a8 <tp_field__u64>, pointer = 0x14f4a8 <tp_field__u64>}}
sample->raw_data is guaranteed to not be 8-byte aligned because it is preceded
by the size as a u3. So accessing raw data with an extended load instruction causes
the SIGBUS. Resolve by using memcpy to a temporary variable of appropriate size.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1424376022-140608-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Thu, 26 Feb 2015 11:25:20 +0000 (12:25 +0100)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New user selectable features:
- Support recording running/enabled time in 'perf record' (Andi Kleen)
- New tool: 'perf data' for converting perf.data to other formats,
initially for the CTF (Common Trace Format) from LTTng (Jiri Olsa, Sebastian Siewior)
User visible changes:
- Only insert blank duration bracket when tracing syscalls in 'perf trace' (Arnaldo Carvalho de Melo)
- Filter out the trace pid when no threads are specified in 'perf trace' (Arnaldo Carvalho de Melo)
- Add 'perf trace' man page entry for --event (Arnaldo Carvalho de Melo)
- Dump stack on segfaults in 'perf trace' (Arnaldo Carvalho de Melo)
Infrastructure changes:
- Introduce set_filter_pid and set_filter_pids methods in the evlist class (Arnaldo Carvalho de Melo)
- Some perf_session untanglement patches, removing the need to pass a
perf_session instance for things that are related to evlists, so that
tools that don't deal with perf.data files like trace in live mode can
make use of the ordered_events class (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Thu, 26 Feb 2015 11:24:50 +0000 (12:24 +0100)]
Merge tag 'v4.0-rc1' into perf/core, to refresh the tree
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Ahern [Thu, 19 Feb 2015 00:37:02 +0000 (19:37 -0500)]
perf tools: Make sparc64 arch point to sparc
The recent build changes cause perf to not compile for sparc64 since the
arch/sparc64/Build file does not exist:
/home/dahern/kernels/linux.git/tools/build/Makefile.build:40: arch/sparc64/Build: No such file or directory
Fix by converting the sparc64 RAW_ARCH to sparc ARCH -- similar to what
is done for x86_64.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1424306222-96843-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Thu, 19 Feb 2015 00:33:37 +0000 (19:33 -0500)]
perf symbols: Define EM_AARCH64 for older OSes
4886f2ca19f6f added an arm-64 check, but the EM_AARCH64 macro is not
defined in older releases (e.g., RHEL6). Define if it is not defined.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Link: http://lkml.kernel.org/r/1424306017-96797-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Thu, 19 Feb 2015 00:03:18 +0000 (19:03 -0500)]
perf top: Fix SIGBUS on sparc64
perf-top is terminating due to SIGBUS on sparc64. git bisect points to:
commit
82396986032915c1572bfb74b224fcc2e4e8ba7c
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Mon Sep 8 13:26:35 2014 -0300
perf evlist: Refcount mmaps
We need to know how many fds are using a perf mmap via
PERF_EVENT_IOC_SET_OUTPUT, so that we can know when to ditch an mmap,
refcount it.
This commit added 'int refcnt' to struct perf_mmap and the addition makes the
event_copy element no longer 8-byte aligned.
Fix by adding __attribute__((aligned(8))) to the event_copy struct
member.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1424304198-92028-1-git-send-email-david.ahern@oracle.com
[ Switched from 'int pad;' to using __attribute__, David tested/acked that ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 24 Feb 2015 11:20:59 +0000 (13:20 +0200)]
perf tools: Fix probing for PERF_FLAG_FD_CLOEXEC flag
Commit
f6edb53c4993ffe92ce521fb449d1c146cea6ec2 converted the probe to
a CPU wide event first (pid == -1). For kernels that do not support
the PERF_FLAG_FD_CLOEXEC flag the probe fails with EINVAL. Since this
errno is not handled pid is not reset to 0 and the subsequent use of
pid = -1 as an argument brings in an additional failure path if
perf_event_paranoid > 0:
$ perf record -- sleep 1
perf_event_open(..., 0) failed unexpectedly with error 13 (Permission denied)
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.007 MB /tmp/perf.data (11 samples) ]
Also, ensure the fd of the confirmation check is closed and comment why
pid = -1 is used.
Needs to go to 3.18 stable tree as well.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Based-on-patch-by: David Ahern <david.ahern@oracle.com>
Acked-by: David Ahern <david.ahern@oracle.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/54EC610C.8000403@intel.com
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sebastian Andrzej Siewior [Fri, 20 Feb 2015 22:17:01 +0000 (23:17 +0100)]
perf data: Add a 'perf' prefix to the generic fields
Some of the tracers bring their own id or pid fields and we can end up
having two of them. This patch adds a "perf_" prefix to the 'generic'
fields so we avoid a clash of the member names.
The change is visible in the babeltrace output:
Before:
$ babeltrace ./ctf-data/
[03:19:13.
962131936] (+0.
000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.
962133732] (+0.
000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
...
Now:
$ babeltrace ./ctf-data/
[03:19:13.
962131936] (+0.
000001935) cycles: { }, { perf_ip = 0xFFFFFFFF8105443A, perf_tid = 20714, perf_pid = 20714, perf_period = 8 }
[03:19:13.
962133732] (+0.
000001796) cycles: { }, { perf_ip = 0xFFFFFFFF8105443A, perf_tid = 20714, perf_pid = 20714, perf_period = 114 }
...
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-5-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 20 Feb 2015 22:17:00 +0000 (23:17 +0100)]
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.
962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.
962130001] (+0.
000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.
962131936] (+0.
000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.
962133732] (+0.
000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.
962135557] (+0.
000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.
962137627] (+0.
000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.
962161091] (+0.
000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.
962517569] (+0.
000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period =
1325731 }
[03:19:13.
969518008] (+0.
007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period =
1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 20 Feb 2015 22:16:59 +0000 (23:16 +0100)]
perf tools: Add new 'perf data' command
Adding new 'perf data' command to provide operations over data files.
The 'perf data convert' sub command is coming in following patch, but
there's possibility for other useful commands like 'perf data ls' (to
display perf data file in directory in ls style).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-3-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 20 Feb 2015 22:16:58 +0000 (23:16 +0100)]
perf tools: Add feature check for libbabeltrace
Adding feature check for babeltrace library [1], which will be used for
perf data file CTF [2] conversion in following patches.
The babeltrace library is now automatically detected as standard
feature. It's possible to specify LIBBABELTRACE_DIR make variable to
specify location of installed libbabeltrace, like:
$ make LIBBABELTRACE_DIR=/opt/libbabeltrace/
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... libbabeltrace: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... DWARF post unwind library: libunwind
NOTE The installation of the [1] to to used by above make:
$ git clone git://git.efficios.com/babeltrace.git
$ cd babeltrace
$ vim README
$ ./bootstrap
$ ./configure --prefix=/opt/libbabeltrace
$ make prefix=/opt/libbabeltrace
$ sudo make install prefix=/opt/libbabeltrace
Please make sure that the /opt/libbabeltrace/lib directory is in your
LD_LIBRARY_PATH:
$ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib
[1] babeltrace - http://www.efficios.com/babeltrace
[2] Common Trace Format - http://www.efficios.com/ctf
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ Added missing babeltrace build instructions ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Tue, 24 Feb 2015 23:13:40 +0000 (15:13 -0800)]
perf record: Support recording running/enabled time
Add an option to perf record to record running/enabled time for read
events, similar to what stat does.
This is useful to understand multiplexing problems.
Right now the report support is not great, but at least report -D
already supports it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1424819620-16043-1-git-send-email-andi@firstfloor.org
[ Fixed the Documentation entry to match the OPT_BOOLEAN one ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 24 Feb 2015 10:46:06 +0000 (12:46 +0200)]
perf tools: Fix pthread_attr_setaffinity_np build error
Feature detection for pthread_attr_setaffinity_np was failing, producing
this error:
In file included from bench/futex-hash.c:17:0:
bench/futex.h:73:19: error: conflicting types for ‘pthread_attr_setaffinity_np’
static inline int pthread_attr_setaffinity_np(pthread_attr_t *attr,
^
In file included from bench/futex.h:72:0,
from bench/futex-hash.c:17:
/usr/include/pthread.h:407:12: note: previous declaration of ‘pthread_attr_setaffinity_np’ was here
extern int pthread_attr_setaffinity_np (pthread_attr_t *__attr,
^
make[3]: *** [bench/futex-hash.o] Error 1
make[2]: *** [bench] Error 2
make[2]: *** Waiting for unfinished jobs....
This was because compiling test-pthread-attr-setaffinity-np.c
failed due to the function arguments:
test-pthread-attr-setaffinity-np.c: In function ‘main’:
test-pthread-attr-setaffinity-np.c:11:2: warning: null argument where non-null required (argument 3) [-Wnonnull]
ret = pthread_attr_setaffinity_np(&thread_attr, 0, NULL);
^
So fix the arguments.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1424774766-24194-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Boyer [Wed, 11 Feb 2015 16:24:05 +0000 (11:24 -0500)]
perf tools: Define _GNU_SOURCE on pthread_attr_setaffinity_np feature check
The man page for pthread_attr_set_affinity_np states that _GNU_SOURCE
must be defined before pthread.h is included in order to get the proper
function declaration. Define this in the Makefile.
Without this defined, the feature check fails on a Fedora system with
gcc5 and then the perf build later fails with conflicting prototypes for
the function.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/20150211162404.GA15522@hansolo.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 24 Feb 2015 20:20:31 +0000 (17:20 -0300)]
perf tools: Print the thread's tid on PERF_RECORD_COMM events when -D is asked
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fmto8ft6jrtwz09dxn5d4z8w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 24 Feb 2015 18:35:55 +0000 (15:35 -0300)]
perf trace: Dump stack on segfaults
[root@ssdandy ~]# perf trace --filter-pids 16348
0.000 ( 0.000 ms): tuned/1027 ... [continued]: select()) = 0 Timeout
793.770 ( 0.000 ms): lsmd/895 ... [continued]: select()) = 0 Timeout
793.775 (793.724 ms): tuned/1027 select(tvp: 0x7f7655556e50) ...
perf: Segmentation fault
Obtained 15 stack frames.
perf(dump_stack+0x2e) [0x4ed330]
perf(sighandler_dump_stack+0x2e) [0x4ed40f]
/lib64/libc.so.6(+0x35640) [0x7fa2d5b69640]
perf() [0x4c2d35]
perf(machine__findnew_thread+0x39) [0x4c2ed6]
perf() [0x454a4d]
perf() [0x455f87]
perf() [0x456556]
perf(cmd_trace+0xa7e) [0x4580af]
perf() [0x4867bd]
perf() [0x486a1c]
perf() [0x486b68]
perf(main+0x23b) [0x486ec9]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7fa2d5b55af5]
perf() [0x41bd91]
[ root@ssdandy ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v38cbxcnm2yf5qn9u4y4n9ab@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 24 Feb 2015 18:34:23 +0000 (15:34 -0300)]
perf tools: Introduce dump_stack signal helper
To use in stdio based tools, like 'trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-79kjmerlw6d88csyx1afzwvn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 22 Feb 2015 21:52:47 +0000 (13:52 -0800)]
perf ordered_events: Stop using tool->ordered_events
To figure out if ordered_events are being used when doing a flush
operation, it is enough to check if there were in fact some events
queued, i.e. look at oe->nr_events.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1c5r404vy766kt5nflv88uag@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Mon, 23 Feb 2015 02:21:14 +0000 (18:21 -0800)]
Linux 4.0-rc1
.. after extensive statistical analysis of my G+ polling, I've come to
the inescapable conclusion that internet polls are bad.
Big surprise.
But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38%
margin, in a poll that people weren't even supposed to participate in.
Who can argue with solid numbers like that? 5,796 votes from people who
can't even follow the most basic directions?
In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%,
but with a total of 29,110 votes right now.
Now, arguably, that vote spread is only about 3,200 votes, which is less
than the almost six thousand votes that the "please ignore" poll got, so
it could be considered noise.
But hey, I asked, so I'll honor the votes.
Bruce Merry [Thu, 15 Jan 2015 09:20:22 +0000 (11:20 +0200)]
perf bench: Fix order of arguments to memcpy_alloc_mem
This was causing the destination instead of the source to be filled. As
a result, the source was typically all mapped to one zero page, and
hence very cacheable.
Signed-off-by: Bruce Merry <bmerry@ska.ac.za>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150115092022.GA11292@kryton
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Mon, 23 Feb 2015 02:05:13 +0000 (18:05 -0800)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Ext4 bug fixes.
We also reserved code points for encryption and read-only images (for
which the implementation is mostly just the reserved code point for a
read-only feature :-)"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix indirect punch hole corruption
ext4: ignore journal checksum on remount; don't fail
ext4: remove duplicate remount check for JOURNAL_CHECKSUM change
ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize
ext4: support read-only images
ext4: change to use setup_timer() instead of init_timer()
ext4: reserve codepoints used by the ext4 encryption feature
jbd2: complain about descriptor block checksum errors
Linus Torvalds [Mon, 23 Feb 2015 01:42:14 +0000 (17:42 -0800)]
Merge branch 'for-linus-2' of git://git./linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
"Assorted stuff from this cycle. The big ones here are multilayer
overlayfs from Miklos and beginning of sorting ->d_inode accesses out
from David"
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits)
autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation
procfs: fix race between symlink removals and traversals
debugfs: leave freeing a symlink body until inode eviction
Documentation/filesystems/Locking: ->get_sb() is long gone
trylock_super(): replacement for grab_super_passive()
fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
SELinux: Use d_is_positive() rather than testing dentry->d_inode
Smack: Use d_is_positive() rather than testing dentry->d_inode
TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR()
Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode
Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb
VFS: Split DCACHE_FILE_TYPE into regular and special types
VFS: Add a fallthrough flag for marking virtual dentries
VFS: Add a whiteout dentry type
VFS: Introduce inode-getting helpers for layered/unioned fs environments
Infiniband: Fix potential NULL d_inode dereference
posix_acl: fix reference leaks in posix_acl_create
autofs4: Wrong format for printing dentry
...
Arnaldo Carvalho de Melo [Sat, 14 Feb 2015 18:08:51 +0000 (15:08 -0300)]
perf session: Remove perf_session from dump_event
All it wants is session->evlist.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6w9663gka3jb1j1rfxxd5jcq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 14 Feb 2015 18:05:28 +0000 (15:05 -0300)]
perf session: Remove perf_session from some deliver event routines
Further untangling perf_session from plain event delivery routines.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cvz8e6pwyogs4w14582iis9w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 14 Feb 2015 17:57:13 +0000 (14:57 -0300)]
perf session: Remove perf_session from warn_errors signature
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pxxm1liohog3d6i826x8sud8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 14 Feb 2015 17:50:11 +0000 (14:50 -0300)]
perf evlist: Adopt events_stats from perf_session
For tools that don't deal with perf.data files, thus do not need to
use perf_session.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kglq67gvauq9tak02a4se00r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 14 Feb 2015 17:26:15 +0000 (14:26 -0300)]
perf session: Remove wrappers to machines__find
Start to untangle session from delivering samples, as there are
tools that want to use ordered_events and don't use perf_session at all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rn4pk3pjxd78sgzrkn19tktp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 20:10:29 +0000 (12:10 -0800)]
perf trace: Separate routine that handles an event from the one that reads it
Because we need to use ordered_events in some cases, so we will need to
first have them in a queue, order that queue, and then process the
event.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cmkw9zgoh0z4r218957ftp1a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 19:49:10 +0000 (11:49 -0800)]
perf trace: Add man page entry for --event
Forgot to do it when adding the feature.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mx152b6x9cgknhw91vsyjlnd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 19:36:52 +0000 (11:36 -0800)]
perf trace: Introduce --filter-pids
When tracing in X we get event loops due to the tracing activity, i.e.
updates to a gnome-terminal that generate syscalls for X.org, etc.
To get a more useful view of what is happening, syscall wise, system
wide, we need to filter those, like in:
# ps ax|egrep '981|2296|1519' | grep -v egrep
981 tty1 Ss+ 5:40 /usr/bin/Xorg :0 -background none ...
1519 ? Sl 2:22 /usr/bin/gnome-shell
2296 ? Sl 4:16 /usr/libexec/gnome-terminal-server
#
# trace -e write --filter-pids 981,2296,1519
0.385 ( 0.021 ms): goa-daemon/2061 write(fd: 1</dev/null>, buf: 0x7fbeb017b000, count: 136) = 136
0.922 ( 0.014 ms): goa-daemon/2061 write(fd: 1</dev/null>, buf: 0x7fbeb017b000, count: 140) = 140
5006.525 ( 0.029 ms): goa-daemon/2061 write(fd: 1</dev/null>, buf: 0x7fbeb017b000, count: 136) = 136
5007.235 ( 0.023 ms): goa-daemon/2061 write(fd: 1</dev/null>, buf: 0x7fbeb017b000, count: 140) = 140
5177.646 ( 0.018 ms): rtkit-daemon/782 write(fd: 5<anon_inode:[eventfd]>, buf: 0x7f7eea70be88, count: 8) = 8
8314.497 ( 0.004 ms): gsd-locate-poi/2084 write(fd: 5<anon_inode:[eventfd]>, buf: 0x7fffe96af7b0, count: 8) = 8
8314.518 ( 0.002 ms): gsd-locate-poi/2084 write(fd: 5<anon_inode:[eventfd]>, buf: 0x7fffe96af0e0, count: 8) = 8
^C#
When this option is used the tracer pid is also filtered.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f5qmiyy7c0uxdm21ncatpeek@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 19:33:47 +0000 (11:33 -0800)]
perf evlist: Introduce set_filter_pids method
We need to filter multiple pids in trace, i.e. trace itself,
gnome-terminal, X.org, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-frtpkg7qapqwf7asa35wf8am@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 18:15:21 +0000 (10:15 -0800)]
perf trace: Filter out the trace pid when no threads are specified
To avoid tracing the tracer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-shmwd1khzpaobr3i0j1ygapg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 18:09:55 +0000 (10:09 -0800)]
perf evlist: Introduce set_filter_pid method
To filter out events for a certain pid, for instance, when tracing
system wide, so that the tracer itself doesn't creates an event loop.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-byoia9dzu4gmkdv87etnd9zf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 20 Feb 2015 05:51:50 +0000 (21:51 -0800)]
perf trace: Only insert blank duration bracket when tracing syscalls
When printing just events, i.e. '--no-sys --ev some:events' it makes no
sense to waste screen space.
Before:
# trace --no-sys --ev probe:*
84481.704 ( ): probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/services")
84481.892 ( ): probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/services")
84482.230 ( ): probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/resolv.conf")
84482.481 ( ): probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/hosts")
85097.725 ( ): probe:vfs_getname:(
ffffffff811ed023) pathname="/root"
#
After:
# trace --no-sys --ev probe:*
0.000 probe:vfs_getname:(
ffffffff811ed023) pathname="/root")
1.711 probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/localtime")
2.103 probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/localtime")
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jhryxgnam8zecq0q0wsy6pyb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sun, 22 Feb 2015 17:57:16 +0000 (09:57 -0800)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"Just one fix this time around. __iommu_alloc_buffer() can cause a
BUG() if dma_alloc_coherent() is called with either __GFP_DMA32 or
__GFP_HIGHMEM set. The patch from Alexandre addresses this"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()
Al Viro [Sun, 22 Feb 2015 03:19:57 +0000 (22:19 -0500)]
autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation
X-Coverup: just ask spender
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 22 Feb 2015 03:16:11 +0000 (22:16 -0500)]
procfs: fix race between symlink removals and traversals
use_pde()/unuse_pde() in ->follow_link()/->put_link() resp.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 22 Feb 2015 03:05:11 +0000 (22:05 -0500)]
debugfs: leave freeing a symlink body until inode eviction
As it is, we have debugfs_remove() racing with symlink traversals.
Supply ->evict_inode() and do freeing there - inode will remain
pinned until we are done with the symlink body.
And rip the idiocy with checking if dentry is positive right after
we'd verified debugfs_positive(), which is a stronger check...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sat, 21 Feb 2015 09:59:02 +0000 (04:59 -0500)]
Documentation/filesystems/Locking: ->get_sb() is long gone
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Konstantin Khlebnikov [Thu, 19 Feb 2015 17:19:35 +0000 (20:19 +0300)]
trylock_super(): replacement for grab_super_passive()
I've noticed significant locking contention in memory reclaimer around
sb_lock inside grab_super_passive(). Grab_super_passive() is called from
two places: in icache/dcache shrinkers (function super_cache_scan) and
from writeback (function __writeback_inodes_wb). Both are required for
progress in memory allocator.
Grab_super_passive() acquires sb_lock to increment sb->s_count and check
sb->s_instances. It seems sb->s_umount locked for read is enough here:
super-block deactivation always runs under sb->s_umount locked for write.
Protecting super-block itself isn't a problem: in super_cache_scan() sb
is protected by shrinker_rwsem: it cannot be freed if its slab shrinkers
are still active. Inside writeback super-block comes from inode from bdi
writeback list under wb->list_lock.
This patch removes locking sb_lock and checks s_instances under s_umount:
generic_shutdown_super() unlinks it under sb->s_umount locked for write.
New variant is called trylock_super() and since it only locks semaphore,
callers must call up_read(&sb->s_umount) instead of drop_super(sb) when
they're done.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
David Howells [Thu, 29 Jan 2015 12:02:36 +0000 (12:02 +0000)]
fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
Fanotify probably doesn't want to watch autodirs so make it use d_can_lookup()
rather than d_is_dir() when checking a dir watch and give an error on fake
directories.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
David Howells [Thu, 29 Jan 2015 12:02:36 +0000 (12:02 +0000)]
Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack
thereof) in cachefiles:
(1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as
it doesn't want to deal with automounts in its cache.
(2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in
cachefiles.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
David Howells [Thu, 29 Jan 2015 12:02:35 +0000 (12:02 +0000)]
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
Convert the following where appropriate:
(1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).
(2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).
(3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more
complicated than it appears as some calls should be converted to
d_can_lookup() instead. The difference is whether the directory in
question is a real dir with a ->lookup op or whether it's a fake dir with
a ->d_automount op.
In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).
Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer. In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.
However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.
There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was
intended for special directory entry types that don't have attached inodes.
The following perl+coccinelle script was used:
use strict;
my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
print "No matches\n";
exit(0);
}
my @cocci = (
'@@',
'expression E;',
'@@',
'',
'- S_ISLNK(E->d_inode->i_mode)',
'+ d_is_symlink(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISDIR(E->d_inode->i_mode)',
'+ d_is_dir(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISREG(E->d_inode->i_mode)',
'+ d_is_reg(E)' );
my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);
foreach my $file (@callers) {
chomp $file;
print "Processing ", $file, "\n";
system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
die "spatch failed";
}
[AV: overlayfs parts skipped]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
OSDN Git Service
