OSDN Git Service
Moshe Shemesh [Wed, 31 May 2023 10:50:21 +0000 (13:50 +0300)]
net/mlx5: Check with FW that sync reset completed successfully
Even if the PF driver had no error on his part of the sync reset flow,
the firmware can see wider picture as it syncs all the PFs in the flow.
So add at end of sync reset flow check with firmware by reading MFRL
register and initialization segment that the flow had no issue from
firmware point of view too.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Shay Drory [Thu, 13 Jul 2023 11:54:57 +0000 (14:54 +0300)]
net/mlx5: Expose max possible SFs via devlink resource
Introduce devlink resource for exposing max possible SFs on mlx5
devices.
For example:
$ devlink resource show pci/0000:00:0b.0
pci/0000:00:0b.0:
name max_local_SFs size 5 unit entry dpipe_tables none
name max_external_SFs size 0 unit entry dpipe_tables none
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Rahul Rameshbabu [Wed, 9 Aug 2023 04:10:21 +0000 (21:10 -0700)]
net/mlx5e: Add recovery flow for tx devlink health reporter for unhealthy PTP SQ
A new check for the tx devlink health reporter is introduced for
determining when the PTP port timestamping SQ is considered unhealthy. If
there are enough CQEs considered never to be delivered, the space that can
be utilized on the SQ decreases significantly, impacting performance and
usability of the SQ. The health reporter is triggered when the number of
likely never delivered port timestamping CQEs that utilize the space of the
PTP SQ is greater than 93.75% of the total capacity of the SQ. A devlink
health reporter recover method is also provided for this specific TX error
context that restarts the PTP SQ.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Rahul Rameshbabu [Tue, 2 May 2023 23:31:40 +0000 (16:31 -0700)]
net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs
Use a map structure for associating CQEs containing port timestamping
information with the appropriate skb. Track order of WQEs submitted using a
FIFO. Check if the corresponding port timestamping CQEs from the lookup
values in the FIFO are considered dropped due to time elapsed. Return the
lookup value to a freelist after consuming the skb. Reuse the freed lookup
in future WQE submission iterations.
The map structure uses an integer identifier for the key and returns an skb
corresponding to that identifier. Embed the integer identifier in the WQE
submitted to the WQ for the transmit path when the SQ is a PTP (port
timestamping) SQ. The embedded identifier can then be queried using a field
in the CQE of the corresponding port timestamping CQ. In the port
timestamping napi_poll context, the identifier is queried from the CQE
polled from CQ and used to lookup the corresponding skb from the WQE submit
path. The skb reference is removed from map and then embedded with the port
HW timestamp information from the CQE and eventually consumed.
The metadata freelist FIFO is an array containing integer identifiers that
can be pushed and popped in the FIFO. The purpose of this structure is
bookkeeping what identifier values can safely be used in a subsequent WQE
submission and should not contain identifiers that have still not been
reaped by processing a corresponding CQE completion on the port
timestamping CQ.
The ts_cqe_pending_list structure is a combination of an array and linked
list. The array is pre-populated with the nodes that will be added and
removed from the head of the linked list. Each node contains the unique
identifier value associated with the values submitted in the WQEs and
retrieved in the port timestamping CQEs. When a WQE is submitted, the node
in the array corresponding to the identifier popped from the metadata
freelist is added to the end of the CQE pending list and is marked as
"in-use". The node is removed from the linked list under two conditions.
The first condition is that the corresponding port timestamping CQE is
polled in the PTP napi_poll context. The second condition is that more than
a second has elapsed since the DMA timestamp value corresponding to the WQE
submission. When the first condition occurs, the "in-use" bit in the linked
list node is cleared, and the resources corresponding to the WQE submission
are then released. The second condition, however, indicates that the port
timestamping CQE will likely never be delivered. It's not impossible for
the device to post a CQE after an infinite amount of time though highly
improbable. In order to be resilient to this improbable case, resources
related to the corresponding WQE submission are still kept, the identifier
value is not returned to the freelist, and the "in-use" bit is cleared on
the node to indicate that it's no longer part of the linked list of "likely
to be delivered" port timestamping CQE identifiers. A count for the number
of port timestamping CQEs considered highly likely to never be delivered by
the device is maintained. This count gets decremented in the unlikely event
a port timestamping CQE considered unlikely to ever be delivered is polled
in the PTP napi_poll context.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Rahul Rameshbabu [Mon, 27 Feb 2023 21:57:00 +0000 (13:57 -0800)]
net/mlx5: Consolidate devlink documentation in devlink/mlx5.rst
De-duplicate documentation by removing mellanox/mlx5/devlink.rst. Instead,
only use the generic devlink documentation directory to document mlx5
devlink parameters. Avoid providing general devlink tool usage information
in mlx5-specific documentation.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jakub Kicinski [Mon, 14 Aug 2023 18:47:27 +0000 (11:47 -0700)]
Merge branch 'devlink-introduce-selective-dumps'
Jiri Pirko says:
====================
devlink: introduce selective dumps
Motivation:
For SFs, one devlink instance per SF is created. There might be
thousands of these on a single host. When a user needs to know port
handle for specific SF, he needs to dump all devlink ports on the host
which does not scale good.
Solution:
Allow user to pass devlink handle (and possibly other attributes)
alongside the dump command and dump only objects which are matching
the selection.
Use split ops to generate policies for dump callbacks acccording to
the attributes used for selection.
The userspace can use ctrl genetlink GET_POLICY command to find out if
the selective dumps are supported by kernel for particular command.
Example:
$ devlink port show
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
$ devlink port show auxiliary/mlx5_core.eth.0
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
$ devlink port show auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
Extension:
patches #12 and #13 extends selection attributes by port index
for health reporter dumping.
====================
Link: https://lore.kernel.org/r/20230811155714.1736405-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:14 +0000 (17:57 +0200)]
netlink: specs: devlink: extend health reporter dump attributes by port index
Allow user to pass port index for health reporter dump request.
Re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-14-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:13 +0000 (17:57 +0200)]
devlink: extend health reporter dump selector by port index
Introduce a possibility for devlink object to expose attributes it
supports for selection of dumped objects.
Use this by health reporter to indicate it supports port index based
selection of dump objects. Implement this selection mechanism in
devlink_nl_cmd_health_reporter_get_dump_one()
Example:
$ devlink health
pci/0000:08:00.0:
reporter fw
state healthy error 0 recover 0 auto_dump true
reporter fw_fatal
state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32768:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32769:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32770:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1:
reporter fw
state healthy error 0 recover 0 auto_dump true
reporter fw_fatal
state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1/98304:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1/98305:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1/98306:
reporter vnic
state healthy error 0 recover 0
$ devlink health show pci/0000:08:00.0
pci/0000:08:00.0:
reporter fw
state healthy error 0 recover 0 auto_dump true
reporter fw_fatal
state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32768:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32769:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32770:
reporter vnic
state healthy error 0 recover 0
$ devlink health show pci/0000:08:00.0/32768
pci/0000:08:00.0/32768:
reporter vnic
state healthy error 0 recover 0
The last command is possible because of this patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-13-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:12 +0000 (17:57 +0200)]
netlink: specs: devlink: extend per-instance dump commands to accept instance attributes
Extend per-instance dump command definitions to accept instance
attributes. Allow parsing of devlink handle attributes so they could
be used for instance selection.
Re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-12-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:11 +0000 (17:57 +0200)]
devlink: allow user to narrow per-instance dumps by passing handle attrs
For SFs, one devlink instance per SF is created. There might be
thousands of these on a single host. When a user needs to know port
handle for specific SF, he needs to dump all devlink ports on the host
which does not scale good.
Allow user to pass devlink handle attributes alongside the dump command
and dump only objects which are under selected devlink instance.
Example:
$ devlink port show
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
$ devlink port show auxiliary/mlx5_core.eth.0
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
$ devlink port show auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-11-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:10 +0000 (17:57 +0200)]
devlink: remove converted commands from small ops
As the commands are already defined in split ops, remove them
from small ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-10-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:09 +0000 (17:57 +0200)]
devlink: remove duplicate temporary netlink callback prototypes
Remove the duplicate temporary netlink callback prototype as the
generated ones are already in place.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:08 +0000 (17:57 +0200)]
netlink: specs: devlink: add commands that do per-instance dump
Add the definitions for the commands that do per-instance dump
and re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-8-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:07 +0000 (17:57 +0200)]
devlink: pass flags as an arg of dump_one() callback
In order to easily set NLM_F_DUMP_FILTERED for partial dumps, pass the
flags as an arg of dump_one() callback. Currently, it is always
NLM_F_MULTI.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-7-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:06 +0000 (17:57 +0200)]
devlink: introduce dumpit callbacks for split ops
Introduce dumpit callbacks for generated split ops. Have them
as a thin wrapper around iteration function and allow to pass dump_one()
function pointer directly without need to store in devlink_cmd structs.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-6-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:05 +0000 (17:57 +0200)]
devlink: rename doit callbacks for per-instance dump commands
Rename netlink doit callback functions for the commands that do
implement per-instance dump to match the generated names that are going
to be introduce in the follow-up patch.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-5-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:04 +0000 (17:57 +0200)]
devlink: introduce devlink_nl_pre_doit_port*() helper functions
Define port handling helpers what don't rely on internal_flags.
Have __devlink_nl_pre_doit() to accept the flags as a function arg and
make devlink_nl_pre_doit() a wrapper helper function calling it.
Introduce new helpers devlink_nl_pre_doit_port() and
devlink_nl_pre_doit_port_optional() to be used by split ops in follow-up
patch.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:03 +0000 (17:57 +0200)]
devlink: parse rate attrs in doit() callbacks
No need to give the rate any special treatment in netlink attributes
parsing, as unlike for ports, there is only a couple of commands
benefiting from that.
Remove DEVLINK_NL_FLAG_NEED_RATE*, make pre_doit() callback simpler
by moving the rate attributes parsing to rate_*_doit() ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Fri, 11 Aug 2023 15:57:02 +0000 (17:57 +0200)]
devlink: parse linecard attr in doit() callbacks
No need to give the linecards any special treatment in netlink attribute
parsing, as unlike for ports, there is only a couple of commands
benefiting from that.
Remove DEVLINK_NL_FLAG_NEED_LINECARD, make pre_doit() callback simpler
by moving the linecard attribute parsing to linecard_[gs]et_doit() ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gabor Juhos [Fri, 11 Aug 2023 11:10:07 +0000 (13:10 +0200)]
net: phy: Introduce PSGMII PHY interface mode
The PSGMII interface is similar to QSGMII. The main difference
is that the PSGMII interface combines five SGMII lines into a
single link while in QSGMII only four lines are combined.
Similarly to the QSGMII, this interface mode might also needs
special handling within the MAC driver.
It is commonly used by Qualcomm with their QCA807x PHY series and
modern WiSoC-s.
Add definitions for the PHY layer to allow to express this type
of connection between the MAC and PHY.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Marko [Fri, 11 Aug 2023 11:10:06 +0000 (13:10 +0200)]
dt-bindings: net: ethernet-controller: add PSGMII mode
Add a new PSGMII mode which is similar to QSGMII with the difference being
that it combines 5 SGMII lines into a single link compared to 4 on QSGMII.
It is commonly used by Qualcomm on their QCA807x PHY series.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 14 Aug 2023 07:11:14 +0000 (08:11 +0100)]
Merge branch 'mlxsw-redirection'
Petr Machata says:
====================
mlxsw: Support traffic redirection from a locked bridge port
Ido Schimmel writes:
It is possible to add a filter that redirects traffic from the ingress
of a bridge port that is locked (i.e., performs security / SMAC lookup)
and has learning enabled. For example:
# ip link add name br0 type bridge
# ip link set dev swp1 master br0
# bridge link set dev swp1 learning on locked on mab on
# tc qdisc add dev swp1 clsact
# tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw src_ip 192.0.2.1 action mirred egress redirect dev swp2
In the kernel's Rx path, this filter is evaluated before the Rx handler
of the bridge, which means that redirected traffic should not be
affected by bridge port configuration such as learning.
However, the hardware data path is a bit different and the redirect
action (FORWARDING_ACTION in hardware) merely attaches a pointer to the
packet, which is later used by the L2 lookup stage to understand how to
forward the packet. Between both stages - ingress ACL and L2 lookup -
learning and security lookup are performed, which means that redirected
traffic is affected by bridge port configuration, unlike in the kernel's
data path.
The learning discrepancy was handled in commit
577fa14d2100 ("mlxsw:
spectrum: Do not process learned records with a dummy FID") by simply
ignoring learning notifications generated by the redirected traffic. A
similar solution is not possible for the security / SMAC lookup since
- unlike learning - the CPU is not involved and packets that failed the
lookup are dropped by the device.
Instead, solve this by prepending the ignore action to the redirect
action and use it to instruct the device to disable both learning and
the security / SMAC lookup for redirected traffic.
Patch #1 adds the ignore action.
Patch #2 prepends the action to the redirect action in flower offload
code.
Patch #3 removes the workaround in commit
577fa14d2100 ("mlxsw:
spectrum: Do not process learned records with a dummy FID") since it is
no longer needed.
Patch #4 adds a test case.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 11 Aug 2023 15:13:58 +0000 (17:13 +0200)]
selftests: forwarding: Add test case for traffic redirection from a locked port
Check that traffic can be redirected from a locked bridge port and that
it does not create locked FDB entries.
Cc: Hans J. Schultz <netdev@kapio-technology.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 11 Aug 2023 15:13:57 +0000 (17:13 +0200)]
mlxsw: spectrum: Stop ignoring learning notifications from redirected traffic
As explained in the previous patch, with the ignore action prepended to
the redirect action, it is not longer possible for redirected traffic to
generate learning notifications.
Therefore, remove the workaround that was added in commit
577fa14d2100
("mlxsw: spectrum: Do not process learned records with a dummy FID") as
it is no longer needed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 11 Aug 2023 15:13:56 +0000 (17:13 +0200)]
mlxsw: spectrum_flower: Disable learning and security lookup when redirecting
It is possible to add a filter that redirects traffic from the ingress
of a bridge port that is locked (i.e., performs security / SMAC lookup)
and has learning enabled. For example:
# ip link add name br0 type bridge
# ip link set dev swp1 master br0
# bridge link set dev swp1 learning on locked on mab on
# tc qdisc add dev swp1 clsact
# tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw src_ip 192.0.2.1 action mirred egress redirect dev swp2
In the kernel's Rx path, this filter is evaluated before the Rx handler
of the bridge, which means that redirected traffic should not be
affected by bridge port configuration such as learning.
However, the hardware data path is a bit different and the redirect
action (FORWARDING_ACTION in hardware) merely attaches a pointer to the
packet, which is later used by the L2 lookup stage to understand how to
forward the packet. Between both stages - ingress ACL and L2 lookup -
learning and security lookup are performed, which means that redirected
traffic is affected by bridge port configuration, unlike in the kernel's
data path.
The learning discrepancy was handled in commit
577fa14d2100 ("mlxsw:
spectrum: Do not process learned records with a dummy FID") by simply
ignoring learning notifications generated by the redirected traffic. A
similar solution is not possible for the security / SMAC lookup since
- unlike learning - the CPU is not involved and packets that failed the
lookup are dropped by the device.
Instead, solve this by prepending the ignore action to the redirect
action and use it to instruct the device to disable both learning and
the security / SMAC lookup for redirected traffic.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 11 Aug 2023 15:13:55 +0000 (17:13 +0200)]
mlxsw: core_acl_flex_actions: Add IGNORE_ACTION
Add the IGNORE_ACTION which is used to ignore basic switching functions
such as learning on a per-packet basis.
The action will be prepended to the FORWARDING_ACTION in subsequent
patches.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Furong Xu [Fri, 11 Aug 2023 12:51:39 +0000 (20:51 +0800)]
net: stmmac: xgmac: show more MAC HW features in debugfs
1. Show TSSTSSEL(Timestamp System Time Source),
ADDMACADRSEL(additional MAC addresses), SMASEL(SMA/MDIO Interface),
HDSEL(Half-duplex Support) in debugfs.
2. Show exact number of additional MAC address registers for XGMAC2 core.
3. XGMAC2 core does not have different IP checksum offload types, so just
show rx_coe instead of rx_coe_type1 or rx_coe_type2.
4. XGMAC2 core does not have rxfifo_over_2048 definition, skip it.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 14 Aug 2023 07:06:25 +0000 (08:06 +0100)]
Merge branch 'net-stats-helpers'
Li Zetao says:
====================
Use helper functions to update stats
The patch set uses the helper functions dev_sw_netstats_rx_add() and
dev_sw_netstats_tx_add() to update stats, which is the same as
implementing the function separately.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zetao [Thu, 10 Aug 2023 08:56:42 +0000 (16:56 +0800)]
vxlan: Use helper functions to update stats
Use the helper functions dev_sw_netstats_rx_add() and
dev_sw_netstats_tx_add() to update stats, which helps to
provide code readability.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zetao [Thu, 10 Aug 2023 08:56:41 +0000 (16:56 +0800)]
net: macsec: Use helper functions to update stats
Use the helper functions dev_sw_netstats_rx_add() and
dev_sw_netstats_tx_add() to update stats, which helps to
provide code readability.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Tu [Thu, 10 Aug 2023 04:13:04 +0000 (21:13 -0700)]
vmxnet3: Add XDP support.
The patch adds native-mode XDP support: XDP DROP, PASS, TX, and REDIRECT.
Background:
The vmxnet3 rx consists of three rings: ring0, ring1, and dataring.
For r0 and r1, buffers at r0 are allocated using alloc_skb APIs and dma
mapped to the ring's descriptor. If LRO is enabled and packet size larger
than 3K, VMXNET3_MAX_SKB_BUF_SIZE, then r1 is used to mapped the rest of
the buffer larger than VMXNET3_MAX_SKB_BUF_SIZE. Each buffer in r1 is
allocated using alloc_page. So for LRO packets, the payload will be in one
buffer from r0 and multiple from r1, for non-LRO packets, only one
descriptor in r0 is used for packet size less than 3k.
When receiving a packet, the first descriptor will have the sop (start of
packet) bit set, and the last descriptor will have the eop (end of packet)
bit set. Non-LRO packets will have only one descriptor with both sop and
eop set.
Other than r0 and r1, vmxnet3 dataring is specifically designed for
handling packets with small size, usually 128 bytes, defined in
VMXNET3_DEF_RXDATA_DESC_SIZE, by simply copying the packet from the backend
driver in ESXi to the ring's memory region at front-end vmxnet3 driver, in
order to avoid memory mapping/unmapping overhead. In summary, packet size:
A. < 128B: use dataring
B. 128B - 3K: use ring0 (VMXNET3_RX_BUF_SKB)
C. > 3K: use ring0 and ring1 (VMXNET3_RX_BUF_SKB + VMXNET3_RX_BUF_PAGE)
As a result, the patch adds XDP support for packets using dataring
and r0 (case A and B), not the large packet size when LRO is enabled.
XDP Implementation:
When user loads and XDP prog, vmxnet3 driver checks configurations, such
as mtu, lro, and re-allocate the rx buffer size for reserving the extra
headroom, XDP_PACKET_HEADROOM, for XDP frame. The XDP prog will then be
associated with every rx queue of the device. Note that when using dataring
for small packet size, vmxnet3 (front-end driver) doesn't control the
buffer allocation, as a result we allocate a new page and copy packet
from the dataring to XDP frame.
The receive side of XDP is implemented for case A and B, by invoking the
bpf program at vmxnet3_rq_rx_complete and handle its returned action.
The vmxnet3_process_xdp(), vmxnet3_process_xdp_small() function handles
the ring0 and dataring case separately, and decides the next journey of
the packet afterward.
For TX, vmxnet3 has split header design. Outgoing packets are parsed
first and protocol headers (L2/L3/L4) are copied to the backend. The
rest of the payload are dma mapped. Since XDP_TX does not parse the
packet protocol, the entire XDP frame is dma mapped for transmission
and transmitted in a batch. Later on, the frame is freed and recycled
back to the memory pool.
Performance:
Tested using two VMs inside one ESXi vSphere 7.0 machine, using single
core on each vmxnet3 device, sender using DPDK testpmd tx-mode attached
to vmxnet3 device, sending 64B or 512B UDP packet.
VM1 txgen:
$ dpdk-testpmd -l 0-3 -n 1 -- -i --nb-cores=3 \
--forward-mode=txonly --eth-peer=0,<mac addr of vm2>
option: add "--txonly-multi-flow"
option: use --txpkts=512 or 64 byte
VM2 running XDP:
$ ./samples/bpf/xdp_rxq_info -d ens160 -a <options> --skb-mode
$ ./samples/bpf/xdp_rxq_info -d ens160 -a <options>
options: XDP_DROP, XDP_PASS, XDP_TX
To test REDIRECT to cpu 0, use
$ ./samples/bpf/xdp_redirect_cpu -d ens160 -c 0 -e drop
Single core performance comparison with skb-mode.
64B: skb-mode -> native-mode
XDP_DROP: 1.6Mpps -> 2.4Mpps
XDP_PASS: 338Kpps -> 367Kpps
XDP_TX: 1.1Mpps -> 2.3Mpps
REDIRECT-drop: 1.3Mpps -> 2.3Mpps
512B: skb-mode -> native-mode
XDP_DROP: 863Kpps -> 1.3Mpps
XDP_PASS: 275Kpps -> 376Kpps
XDP_TX: 554Kpps -> 1.2Mpps
REDIRECT-drop: 659Kpps -> 1.2Mpps
Demo: https://youtu.be/4lm1CSCi78Q
Future work:
- XDP frag support
- use napi_consume_skb() instead of dev_kfree_skb_any at unmap
- stats using u64_stats_t
- using bitfield macro BIT()
- optimization for DMA synchronization using actual frame length,
instead of always max_len
Signed-off-by: William Tu <u9012063@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 14 Aug 2023 07:01:07 +0000 (08:01 +0100)]
Merge branch 'ovs-drop-reasons'
Adrian Moreno says:
====================
openvswitch: add drop reasons
There is currently a gap in drop visibility in the openvswitch module.
This series tries to improve this by adding a new drop reason subsystem
for OVS.
Apart from adding a new drop reasson subsystem and some common drop
reasons, this series takes Eric's preliminary work [1] on adding an
explicit drop action and integrates it into the same subsystem.
A limitation of this series is that it does not report upcall errors.
The reason is that there could be many sources of upcall drops and the
most common one, which is the netlink buffer overflow, cannot be
reported via kfree_skb() because the skb is freed in the netlink layer
(see [2]). Therefore, using a reason for the rare events and not the
common one would be even more misleading. I'd propose we add (in a
follow up patch) a tracepoint to better report upcall errors.
[1] https://lore.kernel.org/netdev/
202306300609.tdRdZscy-lkp@intel.com/T/
[2] commit
1100248a5c5c ("openvswitch: Fix double reporting of drops in dropwatch")
---
v4 -> v5:
- Rebased
- Added a helper function to explicitly convert drop reason enum types
v3 -> v4:
- Changed names of errors following Ilya's suggestions
- Moved the ovs-dpctl.py changes from patch 7/7 to 3/7
- Added a test to ensure actions following a drop are rejected
rfc2 -> v3:
- Rebased on top of latest net-next
rfc1 -> rfc2:
- Fail when an explicit drop is not the last
- Added a drop reason for action errors
- Added braces around macros
- Dropped patch that added support for masks in ovs-dpctl.py as it's now
included in Aaron's series [2].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Moreno [Fri, 11 Aug 2023 14:12:54 +0000 (16:12 +0200)]
selftests: openvswitch: add explicit drop testcase
Test explicit drops generate the right drop reason. Also, verify that
the kernel rejects flows with actions following an explicit drop.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Moreno [Fri, 11 Aug 2023 14:12:53 +0000 (16:12 +0200)]
selftests: openvswitch: add drop reason testcase
Test if the correct drop reason is reported when OVS drops a packet due
to an explicit flow.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Moreno [Fri, 11 Aug 2023 14:12:52 +0000 (16:12 +0200)]
net: openvswitch: add misc error drop reasons
Use drop reasons from include/net/dropreason-core.h when a reasonable
candidate exists.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Moreno [Fri, 11 Aug 2023 14:12:51 +0000 (16:12 +0200)]
net: openvswitch: add meter drop reason
By using an independent drop reason it makes it easy to distinguish
between QoS-triggered or flow-triggered drop.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Garver [Fri, 11 Aug 2023 14:12:50 +0000 (16:12 +0200)]
net: openvswitch: add explicit drop action
From: Eric Garver <eric@garver.life>
This adds an explicit drop action. This is used by OVS to drop packets
for which it cannot determine what to do. An explicit action in the
kernel allows passing the reason _why_ the packet is being dropped or
zero to indicate no particular error happened (i.e: OVS intentionally
dropped the packet).
Since the error codes coming from userspace mean nothing for the kernel,
we squash all of them into only two drop reasons:
- OVS_DROP_EXPLICIT_WITH_ERROR to indicate a non-zero value was passed
- OVS_DROP_EXPLICIT to indicate a zero value was passed (no error)
e.g. trace all OVS dropped skbs
# perf trace -e skb:kfree_skb --filter="reason >= 0x30000"
[..]
106.023 ping/2465 skb:kfree_skb(skbaddr: 0xffffa0e8765f2000, \
location:0xffffffffc0d9b462, protocol: 2048, reason: 196611)
reason: 196611 --> 0x30003 (OVS_DROP_EXPLICIT)
Also, this patch allows ovs-dpctl.py to add explicit drop actions as:
"drop" -> implicit empty-action drop
"drop(0)" -> explicit non-error action drop
"drop(42)" -> explicit error action drop
Signed-off-by: Eric Garver <eric@garver.life>
Co-developed-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Moreno [Fri, 11 Aug 2023 14:12:49 +0000 (16:12 +0200)]
net: openvswitch: add action error drop reason
Add a drop reason for packets that are dropped because an action
returns a non-zero error code.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Moreno [Fri, 11 Aug 2023 14:12:48 +0000 (16:12 +0200)]
net: openvswitch: add last-action drop reason
Create a new drop reason subsystem for openvswitch and add the first
drop reason to represent last-action drops.
Last-action drops happen when a flow has an empty action list or there
is no action that consumes the packet (output, userspace, recirc, etc).
It is the most common way in which OVS drops packets.
Implementation-wise, most of these skb-consuming actions already call
"consume_skb" internally and return directly from within the
do_execute_actions() loop so with minimal changes we can assume that
any skb that exits the loop normally is a packet drop.
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 14 Aug 2023 06:06:14 +0000 (07:06 +0100)]
Merge branch 'mptcp-remove-msk-subflow'
Matthieu Baerts says:
====================
mptcp: get rid of msk->subflow
The MPTCP protocol maintains an additional struct socket per connection,
mainly to be able to easily use tcp-level struct socket operations.
This leads to several side effects, beyond the quite unfortunate /
confusing 'subflow' field name:
- active and passive sockets behaviour is inconsistent: only active ones
have a not NULL msk->subflow, leading to different error handling and
different error code returned to the user-space in several places.
- active sockets uses an unneeded, larger amount of memory
- passive sockets can't successfully go through accept(), disconnect(),
accept() sequence, see [1] for more details.
The 13 first patches of this series are from Paolo and address all the
above, finally getting rid of the blamed field:
- The first patch is a minor clean-up.
- In the next 11 patches, msk->subflow usage is systematically removed
from the MPTCP protocol, replacing it with direct msk->first usage,
eventually introducing new core helpers when needed.
- The 13th patch finally disposes the field, and it's the only patch in
the series intended to produce functional changes.
The last and 14th patch is from Kuniyuki and it is not linked to the
previous ones: it is a small clean-up to get rid of an unnecessary check
in mptcp_init_sock().
[1] https://github.com/multipath-tcp/mptcp_net-next/issues/290
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Kuniyuki Iwashima [Fri, 11 Aug 2023 15:57:27 +0000 (17:57 +0200)]
mptcp: Remove unnecessary test for __mptcp_init_sock()
__mptcp_init_sock() always returns 0 because mptcp_init_sock() used
to return the value directly.
But after commit
18b683bff89d ("mptcp: queue data for mptcp level
retransmission"), __mptcp_init_sock() need not return value anymore.
Let's remove the unnecessary test for __mptcp_init_sock() and make
it return void.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:26 +0000 (17:57 +0200)]
mptcp: get rid of msk->subflow
Such field is now unused just as a flag to control the first subflow
deletion at close() time. Introduce a new bit flag for that and finally
drop the mentioned field.
As an intended side effect, now the first subflow sock is not freed
before close() even for passive sockets. The msk has no open/active
subflows if the first one is closed and the subflow list is singular,
update accordingly the state check in mptcp_stream_accept().
Among other benefits, the subflow removal, reduces the amount of memory
used on the client side for each mptcp connection, allows passive sockets
to go through successful accept()/disconnect()/connect() and makes return
error code consistent for failing both passive and active sockets.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/290
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:25 +0000 (17:57 +0200)]
mptcp: change the mpc check helper to return a sk
After the previous patch the __mptcp_nmpc_socket helper is used
only to ensure that the MPTCP socket is a suitable status - that
is, the mptcp capable handshake is not started yet.
Change the return value to the relevant subflow sock, to finally
remove the last references to first subflow socket in the MPTCP stack.
As a bonus, we can get rid of a few local variables in different
functions.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:24 +0000 (17:57 +0200)]
mptcp: avoid ssock usage in mptcp_pm_nl_create_listen_socket()
This is one of the few remaining spots actually manipulating the
first subflow socket. We can leverage the recently introduced
inet helpers to get rid of ssock there.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:23 +0000 (17:57 +0200)]
mptcp: avoid additional indirection in sockopt
The mptcp sockopt infrastructure unneedly uses the first subflow
socket struct in a few spots. We are going to remove such field
soon, so use directly the first subflow sock instead.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:22 +0000 (17:57 +0200)]
mptcp: avoid unneeded indirection in mptcp_stream_accept()
We are going to remove the first subflow socket soon, so avoid
the additional indirection at accept() time. Instead access
directly the first subflow sock, and update mptcp_accept() to
operate on it. This allows dropping a duplicated check in
mptcp_accept().
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:21 +0000 (17:57 +0200)]
mptcp: avoid additional indirection in mptcp_poll()
We are going to remove the first subflow socket soon, so avoid
the additional indirection at poll() time. Instead access
directly the first subflow sock.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:20 +0000 (17:57 +0200)]
mptcp: avoid additional indirection in mptcp_listen()
We are going to remove the first subflow socket soon, so avoid
the additional indirection via at listen() time. Instead call
directly the recently introduced helper on the first subflow sock.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:19 +0000 (17:57 +0200)]
net: factor out __inet_listen_sk() helper
The mptcp protocol maintains an additional socket just to easily
invoke a few stream operations on the first subflow. One of them
is inet_listen().
Factor out an helper operating directly on the (locked) struct sock,
to allow get rid of the above dependency in the next patch without
duplicating the existing code.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:18 +0000 (17:57 +0200)]
mptcp: mptcp: avoid additional indirection in mptcp_bind()
We are going to remove the first subflow socket soon, so avoid
the additional indirection via at bind() time. Instead call directly
the recently introduced helpers on the first subflow sock.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:17 +0000 (17:57 +0200)]
net: factor out inet{,6}_bind_sk helpers
The mptcp protocol maintains an additional socket just to easily
invoke a few stream operations on the first subflow. One of
them is bind().
Factor out the helpers operating directly on the struct sock, to
allow get rid of the above dependency in the next patch without
duplicating the existing code.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:16 +0000 (17:57 +0200)]
mptcp: avoid subflow socket usage in mptcp_get_port()
We are going to remove the first subflow socket soon, so avoid
accessing it in mptcp_get_port(). Instead, access directly the
first subflow sock.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:15 +0000 (17:57 +0200)]
mptcp: avoid additional __inet_stream_connect() call
The mptcp protocol maintains an additional socket just to easily
invoke a few stream operations on the first subflow. One of them is
__inet_stream_connect().
We are going to remove the first subflow socket soon, so avoid
the additional indirection via at connect time, calling directly
into the sock-level connect() ops.
The sk-level connect never return -EINPROGRESS, cleanup the error
path accordingly. Additionally, the ssk status on error is always
TCP_CLOSE. Avoid unneeded access to the subflow sk state.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 11 Aug 2023 15:57:14 +0000 (17:57 +0200)]
mptcp: avoid unneeded mptcp_token_destroy() calls
The MPTCP protocol currently clears the msk token both at connect() and
listen() time. That is needed to deal with failing connect() calls that
can create a new token while leaving the sk in TCP_CLOSE,SS_UNCONNECTED
status and thus allowing later connect() and/or listen() calls.
Let's deal with such failures explicitly, cleaning the token in a timely
manner and avoid the confusing early mptcp_token_destroy().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jörn-Thorben Hinz [Fri, 11 Aug 2023 17:33:57 +0000 (19:33 +0200)]
net: Remove leftover include from nftables.h
Commit
db3685b4046f ("net: remove obsolete members from struct net")
removed the uses of struct list_head from this header, without removing
the corresponding included header.
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 13 Aug 2023 13:53:53 +0000 (14:53 +0100)]
Merge tag 'for-net-next-2023-08-11' of git://git./linux/kernel/git/bluetooth/bluetooth-next
bluetooth-next pull request for net-next:
- Add new VID/PID for Mediatek MT7922
- Add support multiple BIS/BIG
- Add support for Intel Gale Peak
- Add support for Qualcomm WCN3988
- Add support for BT_PKT_STATUS for ISO sockets
- Various fixes for experimental ISO support
- Load FW v2 for RTL8852C
- Add support for NXP AW693 chipset
- Add support for Mediatek MT2925
Vladimir Oltean [Fri, 11 Aug 2023 11:53:52 +0000 (14:53 +0300)]
net: pcs: lynx: fix lynx_pcs_link_up_sgmii() not doing anything in fixed-link mode
lynx_pcs_link_up_sgmii() is supposed to update the PCS speed and duplex
for the non-inband operating modes, and prior to the blamed commit, it
did just that, but a mistake sneaked into the conversion and reversed
the condition.
It is easy for this to go undetected on platforms that also initialize
the PCS in the bootloader, because Linux doesn't reset it (although
maybe it should). The nature of the bug is that phylink will not touch
the IF_MODE_HALF_DUPLEX | IF_MODE_SPEED_MSK fields when it should, and
it will apparently keep working if the previous values set by the
bootloader were correct.
Fixes:
c689a6528c22 ("net: pcs: lynx: update PCS driver to use neg_mode")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 13 Aug 2023 11:30:40 +0000 (12:30 +0100)]
Merge branch 'net-pci_dev_id'
Zheng Zengkai says:
====================
net: Use pci_dev_id() to simplify the code
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. Use the API to simplify the code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Zengkai [Fri, 11 Aug 2023 11:07:02 +0000 (19:07 +0800)]
net: ngbe: use pci_dev_id() to simplify the code
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Zengkai [Fri, 11 Aug 2023 11:07:01 +0000 (19:07 +0800)]
net: tc35815: Use pci_dev_id() to simplify the code
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Zengkai [Fri, 11 Aug 2023 11:07:00 +0000 (19:07 +0800)]
net: smsc: Use pci_dev_id() to simplify the code
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Zengkai [Fri, 11 Aug 2023 11:06:59 +0000 (19:06 +0800)]
tg3: Use pci_dev_id() to simplify the code
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Zengkai [Fri, 11 Aug 2023 11:06:58 +0000 (19:06 +0800)]
et131x: Use pci_dev_id() to simplify the code
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yue Haibing [Fri, 11 Aug 2023 10:50:05 +0000 (18:50 +0800)]
net: e1000: Remove unused declarations
Commit
675ad47375c7 ("e1000: Use netdev_<level>, pr_<level> and dev_<level>")
declared but never implemented e1000_get_hw_dev_name().
Commit
1532ecea1deb ("e1000: drop dead pcie code from e1000")
removed e1000_check_mng_mode()/e1000_blink_led_start() but not the declarations.
Commit
c46b59b241ec ("e1000: Remove unused function e1000_mta_set.")
removed e1000_mta_set() but not its declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yue Haibing [Fri, 11 Aug 2023 09:50:10 +0000 (17:50 +0800)]
net/rds: Remove unused function declarations
Commit
39de8281791c ("RDS: Main header file") declared but never implemented
rds_trans_init() and rds_trans_exit(), remove it.
Commit
d37c9359056f ("RDS: Move loop-only function to loop.c") removed the
implementation rds_message_inc_free() but not the declaration.
Since commit
55b7ed0b582f ("RDS: Common RDMA transport code")
rds_rdma_conn_connect() is never implemented and used.
rds_tcp_map_seq() is never implemented and used since
commit
70041088e3b9 ("RDS: Add TCP transport to RDS").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 11 Aug 2023 07:22:26 +0000 (07:22 +0000)]
netlink: convert nlk->flags to atomic flags
sk_diag_put_flags(), netlink_setsockopt(), netlink_getsockopt()
and others use nlk->flags without correct locking.
Use set_bit(), clear_bit(), test_bit(), assign_bit() to remove
data-races.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 13 Aug 2023 11:21:38 +0000 (12:21 +0100)]
Merge branch 'tcp-oom-probe'
Menglong Dong says:
====================
net: tcp: support probing OOM
In this series, we make some small changes to make the tcp
retransmission become zero-window probes if the receiver drops the skb
because of memory pressure.
In the 1st patch, we reply a zero-window ACK if the skb is dropped
because out of memory, instead of dropping the skb silently.
In the 2nd patch, we allow a zero-window ACK to update the window.
In the 3rd patch, fix unexcepted socket die when snd_wnd is 0 in
tcp_retransmit_timer().
In the 4th patch, we refactor the debug message in
tcp_retransmit_timer() to make it more correct.
After these changes, the tcp can probe the OOM of the receiver forever.
Changes since v3:
- make the timeout "2 * TCP_RTO_MAX" in the 3rd patch
- tp->retrans_stamp is not based on jiffies and can't be compared with
icsk->icsk_timeout in the 3rd patch. Fix it.
- introduce the 4th patch
Changes since v2:
- refactor the code to avoid code duplication in the 1st patch
- use after() instead of max() in tcp_rtx_probe0_timed_out()
Changes since v1:
- send 0 rwin ACK for the receive queue empty case when necessary in the
1st patch
- send the ACK immediately by using the ICSK_ACK_NOW flag in the 1st
patch
- consider the case of the connection restart from idle, as Neal comment,
in the 3rd patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Fri, 11 Aug 2023 02:55:30 +0000 (10:55 +0800)]
net: tcp: refactor the dbg message in tcp_retransmit_timer()
The debug message in tcp_retransmit_timer() is slightly wrong, because
they could be printed even if we did not receive a new ACK packet from
the remote peer.
Change it to probing zero-window, as it is a expected case now. The
description may be not correct.
Adding the duration since the last ACK we received, and the duration of
the retransmission, which are useful for debugging.
And the message now like this:
Probing zero-window on 127.0.0.1:9999/46946, seq=
3737778959:
3737791503, recv 209ms ago, lasting 209ms
Probing zero-window on 127.0.0.1:9999/46946, seq=
3737778959:
3737791503, recv 404ms ago, lasting 408ms
Probing zero-window on 127.0.0.1:9999/46946, seq=
3737778959:
3737791503, recv 812ms ago, lasting 1224ms
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Fri, 11 Aug 2023 02:55:29 +0000 (10:55 +0800)]
net: tcp: fix unexcepted socket die when snd_wnd is 0
In tcp_retransmit_timer(), a window shrunk connection will be regarded
as timeout if 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX'. This is not
right all the time.
The retransmits will become zero-window probes in tcp_retransmit_timer()
if the 'snd_wnd==0'. Therefore, the icsk->icsk_rto will come up to
TCP_RTO_MAX sooner or later.
However, the timer can be delayed and be triggered after 122877ms, not
TCP_RTO_MAX, as I tested.
Therefore, 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX' is always true
once the RTO come up to TCP_RTO_MAX, and the socket will die.
Fix this by replacing the 'tcp_jiffies32' with '(u32)icsk->icsk_timeout',
which is exact the timestamp of the timeout.
However, "tp->rcv_tstamp" can restart from idle, then tp->rcv_tstamp
could already be a long time (minutes or hours) in the past even on the
first RTO. So we double check the timeout with the duration of the
retransmission.
Meanwhile, making "2 * TCP_RTO_MAX" as the timeout to avoid the socket
dying too soon.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/CADxym3YyMiO+zMD4zj03YPM3FBi-1LHi6gSD2XT8pyAMM096pg@mail.gmail.com/
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Fri, 11 Aug 2023 02:55:28 +0000 (10:55 +0800)]
net: tcp: allow zero-window ACK update the window
Fow now, an ACK can update the window in following case, according to
the tcp_may_update_window():
1. the ACK acknowledged new data
2. the ACK has new data
3. the ACK expand the window and the seq of it is valid
Now, we allow the ACK update the window if the window is 0, and the
seq/ack of it is valid. This is for the case that the receiver replies
an zero-window ACK when it is under memory stress and can't queue the new
data.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Fri, 11 Aug 2023 02:55:27 +0000 (10:55 +0800)]
net: tcp: send zero-window ACK when no memory
For now, skb will be dropped when no memory, which makes client keep
retrans util timeout and it's not friendly to the users.
In this patch, we reply an ACK with zero-window in this case to update
the snd_wnd of the sender to 0. Therefore, the sender won't timeout the
connection and will probe the zero-window with the retransmits.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 12 Aug 2023 01:24:14 +0000 (18:24 -0700)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
i40e: Replace one-element arrays with flexible-array members
Replace one-element arrays with flexible-array members in multiple
structures.
This results in no differences in binary output.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: Replace one-element array with flex-array member in struct i40e_profile_aq_section
i40e: Replace one-element array with flex-array member in struct i40e_section_table
i40e: Replace one-element array with flex-array member in struct i40e_profile_segment
i40e: Replace one-element array with flex-array member in struct i40e_package_header
====================
Link: https://lore.kernel.org/r/20230810175302.1964182-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Thu, 10 Aug 2023 12:25:16 +0000 (14:25 +0200)]
ethernet: atarilance: mark init function static
The init function is only referenced locally, so it should be static to
avoid this warning:
drivers/net/ethernet/amd/atarilance.c:370:28: error: no previous prototype for 'atarilance_probe' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230810122528.1220434-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Thu, 10 Aug 2023 12:25:15 +0000 (14:25 +0200)]
ethernet: ldmvsw: mark ldmvsw_open() static
The function is exported for no reason and should just be static:
drivers/net/ethernet/sun/ldmvsw.c:127:5: error: no previous prototype for 'ldmvsw_open' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20230810122528.1220434-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pauli Virtanen [Sat, 5 Aug 2023 16:08:42 +0000 (19:08 +0300)]
Bluetooth: hci_conn: avoid checking uninitialized CIG/CIS ids
The CIS/CIG ids of ISO connections are defined only when the connection
is unicast.
Fix the lookup functions to check for unicast first. Ensure CIG/CIS
IDs have valid value also in state BT_OPEN.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Sat, 5 Aug 2023 16:08:41 +0000 (19:08 +0300)]
Bluetooth: hci_event: drop only unbound CIS if Set CIG Parameters fails
When user tries to connect a new CIS when its CIG is not configurable,
that connection shall fail, but pre-existing connections shall not be
affected. However, currently hci_cc_le_set_cig_params deletes all CIS
of the CIG on error so it doesn't work, even though controller shall not
change CIG/CIS configuration if the command fails.
Fix by failing on command error only the connections that are not yet
bound, so that we keep the previous CIS configuration like the
controller does.
Fixes:
26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Max Chou [Mon, 7 Aug 2023 11:42:59 +0000 (19:42 +0800)]
Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C
In this commit, prefer to load FW v2 if available. Fallback to FW v1
otherwise. This behavior is only for RTL8852C.
Fixes:
9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support")
Cc: stable@vger.kernel.org
Suggested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Tested-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Ziyang Xuan [Mon, 7 Aug 2023 02:32:06 +0000 (10:32 +0800)]
Bluetooth: Remove unnecessary NULL check before vfree()
Remove unnecessary NULL check which causes coccinelle warning:
net/bluetooth/coredump.c:104:2-7: WARNING: NULL check before some
freeing functions is not needed.
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Manish Mandlik [Fri, 4 Aug 2023 18:14:45 +0000 (11:14 -0700)]
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor()
KSAN reports use-after-free in hci_add_adv_monitor().
While adding an adv monitor,
hci_add_adv_monitor() calls ->
msft_add_monitor_pattern() calls ->
msft_add_monitor_sync() calls ->
msft_le_monitor_advertisement_cb() calls in an error case ->
hci_free_adv_monitor() which frees the *moniter.
This is referenced by bt_dev_dbg() in hci_add_adv_monitor().
Fix the bt_dev_dbg() by using handle instead of monitor->handle.
Fixes:
b747a83690c8 ("Bluetooth: hci_sync: Refactor add Adv Monitor")
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Min Li [Mon, 7 Aug 2023 11:07:41 +0000 (19:07 +0800)]
Bluetooth: Fix potential use-after-free when clear keys
Similar to commit
c5d2b6fa26b5 ("Bluetooth: Fix use-after-free in
hci_remove_ltk/hci_remove_irk"). We can not access k after kfree_rcu()
call.
Fixes:
d7d41682efc2 ("Bluetooth: Fix Suspicious RCU usage warnings")
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Fri, 4 Aug 2023 23:23:41 +0000 (16:23 -0700)]
Bluetooth: hci_sync: Introduce PTR_UINT/UINT_PTR macros
This introduces PTR_UINT/UINT_PTR macros and replace the use of
PTR_ERR/ERR_PTR.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Fri, 4 Aug 2023 21:54:09 +0000 (14:54 -0700)]
Bluetooth: hci_conn: Fix hci_le_set_cig_params
When running with concurrent task only one CIS was being assigned so
this attempts to rework the way the PDU is constructed so it is handled
later at the callback instead of in place.
Fixes:
26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Fri, 4 Aug 2023 18:03:43 +0000 (11:03 -0700)]
Bluetooth: hci_core: Make hci_is_le_conn_scanning public
This moves hci_is_le_conn_scanning to hci_core.h so it can be used by
different files without having to duplicate its code.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 3 Aug 2023 23:41:34 +0000 (16:41 -0700)]
Bluetooth: hci_conn: Fix not allowing valid CIS ID
Only the number of CIS shall be limited to 0x1f, the CIS ID in the
other hand is up to 0xef.
Fixes:
26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 3 Aug 2023 21:49:14 +0000 (14:49 -0700)]
Bluetooth: hci_conn: Fix modifying handle while aborting
This introduces hci_conn_set_handle which takes care of verifying the
conditions where the hci_conn handle can be modified, including when
hci_conn_abort has been called and also checks that the handles is
valid as well.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 3 Aug 2023 21:41:46 +0000 (14:41 -0700)]
Bluetooth: ISO: Fix not checking for valid CIG/CIS IDs
Valid range of CIG/CIS are 0x00 to 0xEF, so this checks they are
properly checked before attempting to use HCI_OP_LE_SET_CIG_PARAMS.
Fixes:
ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 3 Aug 2023 18:04:51 +0000 (11:04 -0700)]
Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync
Connections may be cleanup while waiting for the commands to complete so
this attempts to check if the connection handle remains valid in case of
errors that would lead to call hci_conn_failed:
BUG: KASAN: slab-use-after-free in hci_conn_failed+0x1f/0x160
Read of size 8 at addr
ffff888001376958 by task kworker/u3:0/52
CPU: 0 PID: 52 Comm: kworker/u3:0 Not tainted
6.5.0-rc1-00527-g2dfe76d58d3a #5615
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x1d/0x70
print_report+0xce/0x620
? __virt_addr_valid+0xd4/0x150
? hci_conn_failed+0x1f/0x160
kasan_report+0xd1/0x100
? hci_conn_failed+0x1f/0x160
hci_conn_failed+0x1f/0x160
hci_abort_conn_sync+0x237/0x360
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 3 Aug 2023 04:08:53 +0000 (21:08 -0700)]
Bluetooth: hci_sync: Fix handling of HCI_OP_CREATE_CONN_CANCEL
When sending HCI_OP_CREATE_CONN_CANCEL it shall Wait for
HCI_EV_CONN_COMPLETE, not HCI_EV_CMD_STATUS, when the reason is
anything but HCI_ERROR_REMOTE_POWER_OFF. This reason is used when
suspending or powering off, where we don't want to wait for the peer's
response.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Wed, 26 Jul 2023 21:25:25 +0000 (00:25 +0300)]
Bluetooth: hci_sync: delete CIS in BT_OPEN/CONNECT/BOUND when aborting
Dropped CIS that are in state BT_OPEN/BT_BOUND, and in state BT_CONNECT
with HCI_CONN_CREATE_CIS unset, should be cleaned up immediately.
Closing CIS ISO sockets should result to the hci_conn be deleted, so
that potentially pending CIG removal can run.
hci_abort_conn cannot refer to them by handle, since their handle is
still unset if Set CIG Parameters has not yet completed.
This fixes CIS not being terminated if the socket is shut down
immediately after connection, so that the hci_abort_conn runs before Set
CIG Parameters completes. See new BlueZ test "ISO Connect Close - Success"
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Wed, 26 Jul 2023 21:25:26 +0000 (00:25 +0300)]
Bluetooth: ISO: handle bound CIS cleanup via hci_conn
Calling hci_conn_del in __iso_sock_close is invalid. It needs
hdev->lock, but it cannot be acquired there due to lock ordering.
Fix this by doing cleanup via hci_conn_drop.
Return hci_conn with refcount 1 from hci_bind_cis and hci_connect_cis,
so that the iso_conn always holds one reference. This also fixes
refcounting when error handling.
Since hci_conn_abort shall handle termination of connections in any
state properly, we can handle BT_CONNECT socket state in the same way as
BT_CONNECTED.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Yue Haibing [Fri, 28 Jul 2023 03:30:11 +0000 (11:30 +0800)]
Bluetooth: Remove unused declaration amp_read_loc_info()
This is introduced in commit
903e45411099 but was never implemented.
Fixes:
903e45411099 ("Bluetooth: AMP: Use HCI cmd to Read Loc AMP Assoc")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 20 Jul 2023 22:16:32 +0000 (15:16 -0700)]
Bluetooth: btusb: Move btusb_recv_event_intel to btintel
btusb_recv_event_intel is specific to Intel controllers therefore it
shall be placed inside btintel.c so btusb don't have a mix of vendor
specific code with the generic parts.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luca Weiss [Wed, 2 Aug 2023 06:56:29 +0000 (08:56 +0200)]
Bluetooth: btqca: Add WCN3988 support
Add support for the Bluetooth chip codenamed APACHE which is part of
WCN3988.
The firmware for this chip has a slightly different naming scheme
compared to most others. For ROM Version 0x0200 we need to use
apbtfw10.tlv + apnv10.bin and for ROM version 0x201 apbtfw11.tlv +
apnv11.bin
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luca Weiss [Wed, 2 Aug 2023 06:56:28 +0000 (08:56 +0200)]
dt-bindings: net: qualcomm: Add WCN3988
Add the compatible for the Bluetooth part of the Qualcomm WCN3988
chipset.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Neeraj Sanjay Kale [Thu, 27 Jul 2023 13:33:17 +0000 (19:03 +0530)]
Bluetooth: btnxpuart: Add support for AW693 chipset
This adds support for NXP AW693 chipset in btnxpuart driver
by adding FW name and bootloader signature. Based on the
loader version bits 7:6 of the bootloader signature, the
driver can choose between selecting secure and non-secure
FW files.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Yuanjun Gong [Wed, 26 Jul 2023 13:30:00 +0000 (21:30 +0800)]
Bluetooth: nokia: fix value check in nokia_bluetooth_serdev_probe()
in nokia_bluetooth_serdev_probe(), check the return value of
clk_prepare_enable() and return the error code if
clk_prepare_enable() returns an unexpected value.
Fixes:
7bb318680e86 ("Bluetooth: add nokia driver")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rob Herring [Fri, 14 Jul 2023 17:40:57 +0000 (11:40 -0600)]
bluetooth: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Mans Rullgard [Sat, 15 Jul 2023 16:41:59 +0000 (17:41 +0100)]
Bluetooth: btbcm: add default address for BCM43430A1
The BCM43430A1 has a default MAC address of AA:AA:AA:AA:AA:AA.
Although, unlike some other entries, this does not include the
chip name, it is clearly not a real address. This was found in
AzureWave AW-NB197SM and AW-NM372SM modules.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 13 Jul 2023 21:02:37 +0000 (14:02 -0700)]
Bluetooth: ISO: Add support for BT_PKT_STATUS
This adds support for BT_PKT_STATUS socketopt by setting
BT_SK_PKT_STATUS. Then upon receiving an ISO packet the code would
attempt to store the Packet_Status_Flag to hci_skb_pkt_status which
is then forward to userspace in the form of BT_SCM_PKT_STATUS whenever
BT_PKT_STATUS has been enabled/set.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 13 Jul 2023 20:41:31 +0000 (13:41 -0700)]
Bluetooth: af_bluetooth: Make BT_PKT_STATUS generic
This makes the handling of BT_PKT_STATUS more generic so it can be
reused by sockets other than SCO like BT_DEFER_SETUP, etc.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>