OSDN Git Service
Tong Zhang [Thu, 11 Mar 2021 04:27:35 +0000 (23:27 -0500)]
mISDN: fix crash in fritzpci
setup_fritz() in avmfritz.c might fail with -EIO and in this case the
isac.type and isac.write_reg is not initialized and remains 0(NULL).
A subsequent call to isac_release() will dereference isac->write_reg and
crash.
[ 1.737444] BUG: kernel NULL pointer dereference, address:
0000000000000000
[ 1.737809] #PF: supervisor instruction fetch in kernel mode
[ 1.738106] #PF: error_code(0x0010) - not-present page
[ 1.738378] PGD 0 P4D 0
[ 1.738515] Oops: 0010 [#1] SMP NOPTI
[ 1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78
[ 1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-48-gd9c812dda519-p
rebuilt.qemu.org 04/01/2014
[ 1.739664] RIP: 0010:0x0
[ 1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 1.740200] RSP: 0018:
ffffc9000027ba10 EFLAGS:
00010202
[ 1.740478] RAX:
0000000000000000 RBX:
ffff888102f41840 RCX:
0000000000000027
[ 1.740853] RDX:
00000000000000ff RSI:
0000000000000020 RDI:
ffff888102f41800
[ 1.741226] RBP:
ffffc9000027ba20 R08:
ffff88817bc18440 R09:
ffffc9000027b808
[ 1.741600] R10:
0000000000000001 R11:
0000000000000001 R12:
ffff888102f41840
[ 1.741976] R13:
00000000fffffffb R14:
ffff888102f41800 R15:
ffff8881008b0000
[ 1.742351] FS:
00007fda3a38a8c0(0000) GS:
ffff88817bc00000(0000) knlGS:
0000000000000000
[ 1.742774] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1.743076] CR2:
ffffffffffffffd6 CR3:
00000001021ec000 CR4:
00000000000006f0
[ 1.743452] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 1.743828] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 1.744206] Call Trace:
[ 1.744339] isac_release+0xcc/0xe0 [mISDNipac]
[ 1.744582] fritzpci_probe.cold+0x282/0x739 [avmfritz]
[ 1.744861] local_pci_probe+0x48/0x80
[ 1.745063] pci_device_probe+0x10f/0x1c0
[ 1.745278] really_probe+0xfb/0x420
[ 1.745471] driver_probe_device+0xe9/0x160
[ 1.745693] device_driver_attach+0x5d/0x70
[ 1.745917] __driver_attach+0x8f/0x150
[ 1.746123] ? device_driver_attach+0x70/0x70
[ 1.746354] bus_for_each_dev+0x7e/0xc0
[ 1.746560] driver_attach+0x1e/0x20
[ 1.746751] bus_add_driver+0x152/0x1f0
[ 1.746957] driver_register+0x74/0xd0
[ 1.747157] ? 0xffffffffc00d8000
[ 1.747334] __pci_register_driver+0x54/0x60
[ 1.747562] AVM_init+0x36/0x1000 [avmfritz]
[ 1.747791] do_one_initcall+0x48/0x1d0
[ 1.747997] ? __cond_resched+0x19/0x30
[ 1.748206] ? kmem_cache_alloc_trace+0x390/0x440
[ 1.748458] ? do_init_module+0x28/0x250
[ 1.748669] do_init_module+0x62/0x250
[ 1.748870] load_module+0x23ee/0x26a0
[ 1.749073] __do_sys_finit_module+0xc2/0x120
[ 1.749307] ? __do_sys_finit_module+0xc2/0x120
[ 1.749549] __x64_sys_finit_module+0x1a/0x20
[ 1.749782] do_syscall_64+0x38/0x90
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lv Yunlong [Thu, 11 Mar 2021 04:01:40 +0000 (20:01 -0800)]
net/qlcnic: Fix a use after free in qlcnic_83xx_get_minidump_template
In qlcnic_83xx_get_minidump_template, fw_dump->tmpl_hdr was freed by
vfree(). But unfortunately, it is used when extended is true.
Fixes:
7061b2bdd620e ("qlogic: Deletion of unnecessary checks before two function calls")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Mar 2021 00:15:42 +0000 (16:15 -0800)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-03-11
This series contains updates to igc and e1000e drivers.
Sasha adds locking to reset task to prevent race condition for igc.
Muhammad fixes reporting of supported pause frame as well as advertised
pause frame for Tx/Rx off for igc.
Andre fixes timestamp retrieval from the wrong timer for igc.
Vitaly adds locking to reset task to prevent race condition for e1000e.
Dinghao Liu adds a missed check to return on error in
e1000_set_d0_lplu_state_82571.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tonghao Zhang [Thu, 11 Mar 2021 02:57:36 +0000 (10:57 +0800)]
net: sock: simplify tw proto registration
Introduce the new function tw_prot_init (inspired by
req_prot_init) to simplify "proto_register" function.
tw_prot_cleanup will take care of a partially initialized
timewait_sock_ops.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dinghao Liu [Sun, 28 Feb 2021 09:44:23 +0000 (17:44 +0800)]
e1000e: Fix error handling in e1000_set_d0_lplu_state_82571
There is one e1e_wphy() call in e1000_set_d0_lplu_state_82571
that we have caught its return value but lack further handling.
Check and terminate the execution flow just like other e1e_wphy()
in this function.
Fixes:
bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Vitaly Lifshits [Wed, 21 Oct 2020 11:59:37 +0000 (14:59 +0300)]
e1000e: add rtnl_lock() to e1000_reset_task
A possible race condition was found in e1000_reset_task,
after discovering a similar issue in igb driver via
commit
024a8168b749 ("igb: reinit_locked() should be called
with rtnl_lock").
Added rtnl_lock() and rtnl_unlock() to avoid this.
Fixes:
bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Andre Guedes [Wed, 10 Mar 2021 06:42:56 +0000 (22:42 -0800)]
igc: Fix igc_ptp_rx_pktstamp()
The comment describing the timestamps layout in the packet buffer is
wrong and the code is actually retrieving the timestamp in Timer 1
reference instead of Timer 0. This hasn't been a big issue so far
because hardware is configured to report both timestamps using Timer 0
(see IGC_SRRCTL register configuration in igc_ptp_enable_rx_timestamp()
helper). This patch fixes the comment and the code so we retrieve the
timestamp in Timer 0 reference as expected.
This patch also takes the opportunity to get rid of the hw.mac.type check
since it is not required.
Fixes:
81b055205e8ba ("igc: Add support for RX timestamping")
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Muhammad Husaini Zulkifli [Fri, 19 Feb 2021 16:36:48 +0000 (00:36 +0800)]
igc: Fix Supported Pause Frame Link Setting
The Supported Pause Frame always display "No" even though the Advertised
pause frame showing the correct setting based on the pause parameters via
ethtool. Set bit in link_ksettings to "Supported" for Pause Frame.
Before output:
Supported pause frame use: No
Expected output:
Supported pause frame use: Symmetric
Fixes:
8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Malli C <mallikarjuna.chilakala@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Muhammad Husaini Zulkifli [Fri, 19 Feb 2021 16:36:47 +0000 (00:36 +0800)]
igc: Fix Pause Frame Advertising
Fix Pause Frame Advertising when getting the advertisement via ethtool.
Remove setting the "advertising" bit in link_ksettings during default
case when Tx and Rx are in off state with Auto Negotiate off.
Below is the original output of advertisement link during Tx and Rx off:
Advertised pause frame use: Symmetric Receive-only
Expected output:
Advertised pause frame use: No
Fixes:
8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Malli C <mallikarjuna.chilakala@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sasha Neftin [Tue, 20 Oct 2020 13:34:00 +0000 (16:34 +0300)]
igc: reinit_locked() should be called with rtnl_lock
This commit applies to the igc_reset_task the same changes that
were applied to the igb driver in commit
024a8168b749 ("igb:
reinit_locked() should be called with rtnl_lock")
and fix possible race in reset subtask.
Fixes:
0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Florian Fainelli [Wed, 10 Mar 2021 22:17:58 +0000 (14:17 -0800)]
net: dsa: bcm_sf2: Qualify phydev->dev_flags based on port
Similar to commit
92696286f3bb37ba50e4bd8d1beb24afb759a799 ("net:
bcmgenet: Set phydev->dev_flags only for internal PHYs") we need to
qualify the phydev->dev_flags based on whether the port is connected to
an internal or external PHY otherwise we risk having a flags collision
with a completely different interpretation depending on the driver.
Fixes:
aa9aef77c761 ("net: dsa: bcm_sf2: communicate integrated PHY revision to PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 10 Mar 2021 18:46:10 +0000 (10:46 -0800)]
net: dsa: b53: VLAN filtering is global to all users
The bcm_sf2 driver uses the b53 driver as a library but does not make
usre of the b53_setup() function, this made it fail to inherit the
vlan_filtering_is_global attribute. Fix this by moving the assignment to
b53_switch_alloc() which is used by bcm_sf2.
Fixes:
7228b23e68f7 ("net: dsa: b53: Let DSA handle mismatched VLAN filtering settings")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 10 Mar 2021 16:26:41 +0000 (08:26 -0800)]
net: sched: validate stab values
iproute2 package is well behaved, but malicious user space can
provide illegal shift values and trigger UBSAN reports.
Add stab parameter to red_check_params() to validate user input.
syzbot reported:
UBSAN: shift-out-of-bounds in ./include/net/red.h:312:18
shift exponent 111 is too large for 64-bit type 'long unsigned int'
CPU: 1 PID: 14662 Comm: syz-executor.3 Not tainted 5.12.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
red_calc_qavg_from_idle_time include/net/red.h:312 [inline]
red_calc_qavg include/net/red.h:353 [inline]
choke_enqueue.cold+0x18/0x3dd net/sched/sch_choke.c:221
__dev_xmit_skb net/core/dev.c:3837 [inline]
__dev_queue_xmit+0x1943/0x2e00 net/core/dev.c:4150
neigh_hh_output include/net/neighbour.h:499 [inline]
neigh_output include/net/neighbour.h:508 [inline]
ip6_finish_output2+0x911/0x1700 net/ipv6/ip6_output.c:117
__ip6_finish_output net/ipv6/ip6_output.c:182 [inline]
__ip6_finish_output+0x4c1/0xe10 net/ipv6/ip6_output.c:161
ip6_finish_output+0x35/0x200 net/ipv6/ip6_output.c:192
NF_HOOK_COND include/linux/netfilter.h:290 [inline]
ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:215
dst_output include/net/dst.h:448 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
NF_HOOK include/linux/netfilter.h:295 [inline]
ip6_xmit+0x127e/0x1eb0 net/ipv6/ip6_output.c:320
inet6_csk_xmit+0x358/0x630 net/ipv6/inet6_connection_sock.c:135
dccp_transmit_skb+0x973/0x12c0 net/dccp/output.c:138
dccp_send_reset+0x21b/0x2b0 net/dccp/output.c:535
dccp_finish_passive_close net/dccp/proto.c:123 [inline]
dccp_finish_passive_close+0xed/0x140 net/dccp/proto.c:118
dccp_terminate_connection net/dccp/proto.c:958 [inline]
dccp_close+0xb3c/0xe60 net/dccp/proto.c:1028
inet_release+0x12e/0x280 net/ipv4/af_inet.c:431
inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:478
__sock_release+0xcd/0x280 net/socket.c:599
sock_close+0x18/0x20 net/socket.c:1258
__fput+0x288/0x920 fs/file_table.c:280
task_work_run+0xdd/0x1a0 kernel/task_work.c:140
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
Fixes:
8afa10cbe281 ("net_sched: red: Avoid illegal values")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 10 Mar 2021 23:23:55 +0000 (15:23 -0800)]
Merge tag 'mlx5-fixes-2021-03-10' of git://git./linux/kernel/git/saeed/linux
mlx5-fixes-2021-03-10
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Wed, 10 Mar 2021 12:51:59 +0000 (13:51 +0100)]
net: dsa: bcm_sf2: use 2 Gbps IMP port link on BCM4908
BCM4908 uses 2 Gbps link between switch and the Ethernet interface.
Without this BCM4908 devices were able to achieve only 2 x ~895 Mb/s.
This allows handling e.g. NAT traffic with 940 Mb/s.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Andrianov [Wed, 10 Mar 2021 08:10:46 +0000 (11:10 +0300)]
net: pxa168_eth: Fix a potential data race in pxa168_eth_remove
pxa168_eth_remove() firstly calls unregister_netdev(),
then cancels a timeout work. unregister_netdev() shuts down a device
interface and removes it from the kernel tables. If the timeout occurs
in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop
and open of the device. It may lead to an inconsistent state and memory
leaks.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Pavel Andrianov <andrianov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 10 Mar 2021 09:56:36 +0000 (01:56 -0800)]
macvlan: macvlan_count_rx() needs to be aware of preemption
macvlan_count_rx() can be called from process context, it is thus
necessary to disable preemption before calling u64_stats_update_begin()
syzbot was able to spot this on 32bit arch:
WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert include/linux/seqlock.h:271 [inline]
WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269
Modules linked in:
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 4632 Comm: kworker/1:3 Not tainted 5.12.0-rc2-syzkaller #0
Hardware name: ARM-Versatile Express
Workqueue: events macvlan_process_broadcast
Backtrace:
[<
82740468>] (dump_backtrace) from [<
827406dc>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252)
r7:
00000080 r6:
60000093 r5:
00000000 r4:
8422a3c4
[<
827406c4>] (show_stack) from [<
82751b58>] (__dump_stack lib/dump_stack.c:79 [inline])
[<
827406c4>] (show_stack) from [<
82751b58>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120)
[<
82751aa0>] (dump_stack) from [<
82741270>] (panic+0x130/0x378 kernel/panic.c:231)
r7:
830209b4 r6:
84069ea4 r5:
00000000 r4:
844350d0
[<
82741140>] (panic) from [<
80244924>] (__warn+0xb0/0x164 kernel/panic.c:605)
r3:
8404ec8c r2:
00000000 r1:
00000000 r0:
830209b4
r7:
0000010f
[<
80244874>] (__warn) from [<
82741520>] (warn_slowpath_fmt+0x68/0xd4 kernel/panic.c:628)
r7:
81363f70 r6:
0000010f r5:
83018e50 r4:
00000000
[<
827414bc>] (warn_slowpath_fmt) from [<
81363f70>] (__seqprop_assert include/linux/seqlock.h:271 [inline])
[<
827414bc>] (warn_slowpath_fmt) from [<
81363f70>] (__seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269)
r8:
5a109000 r7:
0000000f r6:
a568dac0 r5:
89802300 r4:
00000001
[<
81363e80>] (__seqprop_assert.constprop.0) from [<
81364af0>] (u64_stats_update_begin include/linux/u64_stats_sync.h:128 [inline])
[<
81363e80>] (__seqprop_assert.constprop.0) from [<
81364af0>] (macvlan_count_rx include/linux/if_macvlan.h:47 [inline])
[<
81363e80>] (__seqprop_assert.constprop.0) from [<
81364af0>] (macvlan_broadcast+0x154/0x26c drivers/net/macvlan.c:291)
r5:
89802300 r4:
8a927740
[<
8136499c>] (macvlan_broadcast) from [<
81365020>] (macvlan_process_broadcast+0x258/0x2d0 drivers/net/macvlan.c:317)
r10:
81364f78 r9:
8a86d000 r8:
8a9c7e7c r7:
8413aa5c r6:
00000000 r5:
00000000
r4:
89802840
[<
81364dc8>] (macvlan_process_broadcast) from [<
802696a4>] (process_one_work+0x2d4/0x998 kernel/workqueue.c:2275)
r10:
00000008 r9:
8404ec98 r8:
84367a02 r7:
ddfe6400 r6:
ddfe2d40 r5:
898dac80
r4:
8a86d43c
[<
802693d0>] (process_one_work) from [<
80269dcc>] (worker_thread+0x64/0x54c kernel/workqueue.c:2421)
r10:
00000008 r9:
8a9c6000 r8:
84006d00 r7:
ddfe2d78 r6:
898dac94 r5:
ddfe2d40
r4:
898dac80
[<
80269d68>] (worker_thread) from [<
80271f40>] (kthread+0x184/0x1a4 kernel/kthread.c:292)
r10:
85247e64 r9:
898dac80 r8:
80269d68 r7:
00000000 r6:
8a9c6000 r5:
89a2ee40
r4:
8a97bd00
[<
80271dbc>] (kthread) from [<
80200114>] (ret_from_fork+0x14/0x20 arch/arm/kernel/entry-common.S:158)
Exception stack(0x8a9c7fb0 to 0x8a9c7ff8)
Fixes:
412ca1550cbe ("macvlan: Move broadcasts into a work queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 10 Mar 2021 10:28:01 +0000 (12:28 +0200)]
drop_monitor: Perform cleanup upon probe registration failure
In the rare case that drop_monitor fails to register its probe on the
'napi_poll' tracepoint, it will not deactivate its hysteresis timer as
part of the error path. If the hysteresis timer was armed by the shortly
lived 'kfree_skb' probe and user space retries to initiate tracing, a
warning will be emitted for trying to initialize an active object [1].
Fix this by properly undoing all the operations that were done prior to
probe registration, in both software and hardware code paths.
Note that syzkaller managed to fail probe registration by injecting a
slab allocation failure [2].
[1]
ODEBUG: init active (active state 0) object type: timer_list hint: sched_send_work+0x0/0x60 include/linux/list.h:135
WARNING: CPU: 1 PID: 8649 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Modules linked in:
CPU: 1 PID: 8649 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505
[...]
Call Trace:
__debug_object_init+0x524/0xd10 lib/debugobjects.c:588
debug_timer_init kernel/time/timer.c:722 [inline]
debug_init kernel/time/timer.c:770 [inline]
init_timer_key+0x2d/0x340 kernel/time/timer.c:814
net_dm_trace_on_set net/core/drop_monitor.c:1111 [inline]
set_all_monitor_traces net/core/drop_monitor.c:1188 [inline]
net_dm_monitor_start net/core/drop_monitor.c:1295 [inline]
net_dm_cmd_trace+0x720/0x1220 net/core/drop_monitor.c:1339
genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:739
genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:800
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e8/0x810 net/socket.c:2348
___sys_sendmsg+0xf3/0x170 net/socket.c:2402
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2435
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
[2]
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
CPU: 1 PID: 8645 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
dump_stack+0xfa/0x151
should_fail.cold+0x5/0xa
should_failslab+0x5/0x10
__kmalloc+0x72/0x3f0
tracepoint_add_func+0x378/0x990
tracepoint_probe_register+0x9c/0xe0
net_dm_cmd_trace+0x7fc/0x1220
genl_family_rcv_msg_doit+0x228/0x320
genl_rcv_msg+0x328/0x580
netlink_rcv_skb+0x153/0x420
genl_rcv+0x24/0x40
netlink_unicast+0x533/0x7d0
netlink_sendmsg+0x856/0xd90
sock_sendmsg+0xcf/0x120
____sys_sendmsg+0x6e8/0x810
___sys_sendmsg+0xf3/0x170
__sys_sendmsg+0xe5/0x1b0
do_syscall_64+0x2d/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes:
70c69274f354 ("drop_monitor: Initialize timer and work item upon tracing enable")
Fixes:
8ee2267ad33e ("drop_monitor: Convert to using devlink tracepoint")
Reported-by: syzbot+779559d6503f3a56213d@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 10 Mar 2021 23:14:56 +0000 (15:14 -0800)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2021-03-10
The following pull-request contains BPF updates for your *net* tree.
We've added 8 non-merge commits during the last 5 day(s) which contain
a total of 11 files changed, 136 insertions(+), 17 deletions(-).
The main changes are:
1) Reject bogus use of vmlinux BTF as map/prog creation BTF, from Alexei Starovoitov.
2) Fix allocation failure splat in x86 JIT for large progs. Also fix overwriting
percpu cgroup storage from tracing programs when nested, from Yonghong Song.
3) Fix rx queue retrieval in XDP for multi-queue veth, from Maciej Fijalkowski.
4) Fix bpf_check_mtu() helper API before freeze to have mtu_len as custom skb/xdp
L3 input length, from Jesper Dangaard Brouer.
5) Fix inode_storage's lookup_elem return value upon having bad fd, from Tal Lossos.
6) Fix bpftool and libbpf cross-build on MacOS, from Georgi Valkov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Wed, 10 Mar 2021 02:20:35 +0000 (18:20 -0800)]
ipv6: fix suspecious RCU usage warning
Syzbot reported the suspecious RCU usage in nexthop_fib6_nh() when
called from ipv6_route_seq_show(). The reason is ipv6_route_seq_start()
calls rcu_read_lock_bh(), while nexthop_fib6_nh() calls
rcu_dereference_rtnl().
The fix proposed is to add a variant of nexthop_fib6_nh() to use
rcu_dereference_bh_rtnl() for ipv6_route_seq_show().
The reported trace is as follows:
./include/net/nexthop.h:416 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by syz-executor.0/17895:
at: seq_read+0x71/0x12a0 fs/seq_file.c:169
at: seq_file_net include/linux/seq_file_net.h:19 [inline]
at: ipv6_route_seq_start+0xaf/0x300 net/ipv6/ip6_fib.c:2616
stack backtrace:
CPU: 1 PID: 17895 Comm: syz-executor.0 Not tainted 4.15.0-syzkaller #0
Call Trace:
[<
ffffffff849edf9e>] __dump_stack lib/dump_stack.c:17 [inline]
[<
ffffffff849edf9e>] dump_stack+0xd8/0x147 lib/dump_stack.c:53
[<
ffffffff8480b7fa>] lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5745
[<
ffffffff8459ada6>] nexthop_fib6_nh include/net/nexthop.h:416 [inline]
[<
ffffffff8459ada6>] ipv6_route_native_seq_show net/ipv6/ip6_fib.c:2488 [inline]
[<
ffffffff8459ada6>] ipv6_route_seq_show+0x436/0x7a0 net/ipv6/ip6_fib.c:2673
[<
ffffffff81c556df>] seq_read+0xccf/0x12a0 fs/seq_file.c:276
[<
ffffffff81dbc62c>] proc_reg_read+0x10c/0x1d0 fs/proc/inode.c:231
[<
ffffffff81bc28ae>] do_loop_readv_writev fs/read_write.c:714 [inline]
[<
ffffffff81bc28ae>] do_loop_readv_writev fs/read_write.c:701 [inline]
[<
ffffffff81bc28ae>] do_iter_read+0x49e/0x660 fs/read_write.c:935
[<
ffffffff81bc81ab>] vfs_readv+0xfb/0x170 fs/read_write.c:997
[<
ffffffff81c88847>] kernel_readv fs/splice.c:361 [inline]
[<
ffffffff81c88847>] default_file_splice_read+0x487/0x9c0 fs/splice.c:416
[<
ffffffff81c86189>] do_splice_to+0x129/0x190 fs/splice.c:879
[<
ffffffff81c86f66>] splice_direct_to_actor+0x256/0x890 fs/splice.c:951
[<
ffffffff81c8777d>] do_splice_direct+0x1dd/0x2b0 fs/splice.c:1060
[<
ffffffff81bc4747>] do_sendfile+0x597/0xce0 fs/read_write.c:1459
[<
ffffffff81bca205>] SYSC_sendfile64 fs/read_write.c:1520 [inline]
[<
ffffffff81bca205>] SyS_sendfile64+0x155/0x170 fs/read_write.c:1506
[<
ffffffff81015fcf>] do_syscall_64+0x1ff/0x310 arch/x86/entry/common.c:305
[<
ffffffff84a00076>] entry_SYSCALL_64_after_hwframe+0x42/0xb7
Fixes:
f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 10 Mar 2021 20:24:19 +0000 (12:24 -0800)]
Merge branch 'ip6ip6-crash'
Daniel Borkmann says:
====================
Fix ip6ip6 crash for collect_md skbs
Fix a NULL pointer deref panic I ran into for regular ip6ip6 tunnel devices
when collect_md populated skbs were redirected to them for xmit. See patches
for further details, thanks!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 10 Mar 2021 00:38:10 +0000 (01:38 +0100)]
net, bpf: Fix ip6ip6 crash with collect_md populated skbs
I ran into a crash where setting up a ip6ip6 tunnel device which was /not/
set to collect_md mode was receiving collect_md populated skbs for xmit.
The BPF prog was populating the skb via bpf_skb_set_tunnel_key() which is
assigning special metadata dst entry and then redirecting the skb to the
device, taking ip6_tnl_start_xmit() -> ipxip6_tnl_xmit() -> ip6_tnl_xmit()
and in the latter it performs a neigh lookup based on skb_dst(skb) where
we trigger a NULL pointer dereference on dst->ops->neigh_lookup() since
the md_dst_ops do not populate neigh_lookup callback with a fake handler.
Transform the md_dst_ops into generic dst_blackhole_ops that can also be
reused elsewhere when needed, and use them for the metadata dst entries as
callback ops.
Also, remove the dst_md_discard{,_out}() ops and rely on dst_discard{,_out}()
from dst_init() which free the skb the same way modulo the splat. Given we
will be able to recover just fine from there, avoid any potential splats
iff this gets ever triggered in future (or worse, panic on warns when set).
Fixes:
f38a9eb1f77b ("dst: Metadata destinations")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 10 Mar 2021 00:38:09 +0000 (01:38 +0100)]
net: Consolidate common blackhole dst ops
Move generic blackhole dst ops to the core and use them from both
ipv4_dst_blackhole_ops and ip6_dst_blackhole_ops where possible. No
functional change otherwise. We need these also in other locations
and having to define them over and over again is not great.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yevgeny Kliteynik [Sat, 6 Feb 2021 20:11:52 +0000 (22:11 +0200)]
net/mlx5: DR, Fix potential shift wrapping of 32-bit value in STEv1 getter
Fix 32-bit variable shift wrapping in dr_ste_v1_get_miss_addr.
Fixes:
a6098129c781 ("net/mlx5: DR, Add STEv1 setters and getters")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Shay Drory [Thu, 11 Feb 2021 13:41:35 +0000 (15:41 +0200)]
net/mlx5: SF: Fix error flow of SFs allocation flow
When SF id is unavailable, code jumps to wrong label that accesses
sw id array outside of its range.
Hence, when SF id is not allocated, avoid accessing such array.
Fixes:
8f0105418668 ("net/mlx5: SF, Add port add delete functionality")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Shay Drory [Tue, 2 Feb 2021 10:21:04 +0000 (12:21 +0200)]
net/mlx5: SF: Fix memory leak of work item
Cited patch in the fixes tag missed to free the allocated work.
Fix it by freeing the work after work execution.
Fixes:
f3196bb0f14c ("net/mlx5: Introduce vhca state event notifier")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Parav Pandit [Fri, 26 Feb 2021 08:15:16 +0000 (10:15 +0200)]
net/mlx5: SF, Correct vhca context size
Fix vhca context size as defined by device interface specification.
Fixes:
f3196bb0f14c ("net/mlx5: Introduce vhca state event notifier")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Parav Pandit [Wed, 17 Feb 2021 06:23:29 +0000 (08:23 +0200)]
net/mlx5e: E-switch, Fix rate calculation division
do_div() returns reminder, while cited patch wanted to use
quotient.
Fix it by using quotient.
Fixes:
0e22bfb7c046 ("net/mlx5e: E-switch, Fix rate calculation for overflow")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Gottlieb [Wed, 3 Mar 2021 12:39:20 +0000 (14:39 +0200)]
RDMA/mlx5: Fix timestamp default mode
1. Don't set the ts_format bit to default when it reserved - device is
running in the old mode (free running).
2. XRC doesn't have a CQ therefore the ts format in the QP
context should be default / free running.
3. Set ts_format to WQ.
Fixes:
2fe8d4b87802 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Gottlieb [Wed, 3 Mar 2021 12:36:16 +0000 (14:36 +0200)]
net/mlx5: Set QP timestamp mode to default
QPs which don't care from timestamp mode, should set the ts_format
to default, otherwise the QP creation could be failed if the timestamp
mode is not supported.
Fixes:
2fe8d4b87802 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Wed, 10 Feb 2021 08:33:13 +0000 (10:33 +0200)]
net/mlx5e: Fix error flow in change profile
Move priv memset from init to cleanup to avoid double priv cleanup
that can happen on profile change if also roolback fails.
Add missing cleanup flow in mlx5e_netdev_attach_profile().
Fixes:
c4d7eb57687f ("net/mxl5e: Add change profile method")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Mon, 1 Mar 2021 11:07:08 +0000 (13:07 +0200)]
net/mlx5: Disable VF tunnel TX offload if ignore_flow_level isn't supported
VF tunnel TX traffic offload is adding flow which forward to flow
tables with lower level, which isn't support on all FW versions
and may cause firmware to fail with syndrome.
Fixed by enabling VF tunnel TX offload only if flow table capability
ignore_flow_level is enabled.
Fixes:
10742efc20a4 ("net/mlx5e: VF tunnel TX traffic offloading")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Tue, 2 Mar 2021 09:31:08 +0000 (11:31 +0200)]
net/mlx5e: Check correct ip_version in decapsulation route resolution
flow_attr->ip_version has the matching that should be done inner/outer.
When working with chains, decapsulation is done on chain0 and next chain
match on outer header which is the original inner which could be ipv4.
So in tunnel route resolution we cannot use that to know which ip version
we are at so save tun_ip_version when parsing the tunnel match and use
that.
Fixes:
a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Mon, 1 Mar 2021 15:54:21 +0000 (17:54 +0200)]
net/mlx5: Fix turn-off PPS command
Fix a bug of uninitialized pin index when trying to turn off PPS out.
Fixes:
de19cd6cc977 ("net/mlx5: Move some PPS logic into helper functions")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Tue, 16 Feb 2021 11:39:18 +0000 (13:39 +0200)]
net/mlx5e: Don't match on Geneve options in case option masks are all zero
The cited change added offload support for Geneve options without verifying
the validity of the options masks, this caused offload of rules with match
on Geneve options with class,type and data masks which are zero to fail.
Fix by ignoring the match on Geneve options in case option masks are
all zero.
Fixes:
9272e3df3023 ("net/mlx5e: Geneve, Add support for encap/decap flows offload")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maxim Mikityanskiy [Fri, 29 Jan 2021 12:04:34 +0000 (14:04 +0200)]
net/mlx5e: Revert parameters on errors when changing PTP state without reset
Port timestamping for PTP can be enabled/disabled while the channels are
closed. In that case mlx5e_safe_switch_channels is skipped, and the
preactivate hook is called directly. However, if that hook returns an
error, the channel parameters must be reverted back to their old values.
This commit adds missing handling on this case.
Fixes:
145e5637d941 ("net/mlx5e: Add TX PTP port object support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maxim Mikityanskiy [Thu, 11 Feb 2021 13:51:11 +0000 (15:51 +0200)]
net/mlx5e: When changing XDP program without reset, take refs for XSK RQs
Each RQ (including XSK RQs) takes a reference to the XDP program. When
an XDP program is attached or detached, the channels and queues are
recreated, however, there is a special flow for changing an active XDP
program to another one. In that flow, channels and queues stay alive,
but the refcounts of the old and new XDP programs are adjusted. This
flow didn't increment refcount by the number of active XSK RQs, and this
commit fixes it.
Fixes:
db05815b36cb ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Tue, 12 Jan 2021 11:34:29 +0000 (13:34 +0200)]
net/mlx5e: Set PTP channel pointer explicitly to NULL
When closing the PTP channel, set its pointer explicitly to NULL. PTP
channel is opened on demand, the code verify the pointer validity before
access. Nullify it when closing the PTP channel to avoid unexpected
behavior.
Fixes:
145e5637d941 ("net/mlx5e: Add TX PTP port object support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Sun, 28 Feb 2021 16:40:18 +0000 (18:40 +0200)]
net/mlx5e: Accumulate port PTP TX stats with other channels stats
In addition to .get_ethtool_stats, add port PTP TX stats to
.ndo_get_stats64.
Fixes:
145e5637d941 ("net/mlx5e: Add TX PTP port object support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Tue, 12 Jan 2021 11:21:17 +0000 (13:21 +0200)]
net/mlx5e: RX, Mind the MPWQE gaps when calculating offsets
Since cited patch, MLX5E_REQUIRED_WQE_MTTS is not a power of two.
Hence, usage of MLX5E_LOG_ALIGNED_MPWQE_PPW should be replaced,
as it lost some accuracy. Use the designated macro to calculate
the number of required MTTs.
This makes sure the solution in cited patch works properly.
While here, un-inline mlx5e_get_mpwqe_offset(), and remove the
unused RQ parameter.
Fixes:
c3c9402373fe ("net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Tue, 12 Jan 2021 11:29:14 +0000 (13:29 +0200)]
net/mlx5e: Enforce minimum value check for ICOSQ size
The ICOSQ size should not go below MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE.
Enforce this where it's missing.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Linus Torvalds [Wed, 10 Mar 2021 01:15:56 +0000 (17:15 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.
2) TX skb error handling fix in mt76 driver, also from Felix.
3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.
4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
From Cong Wang.
5) Use correct printf format for dma_addr_t in ath11k, from Geert
Uytterhoeven.
6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
Hsieh.
7) Don't report truncated frames to mac80211 in mt76 driver, from
Lorenzop Bianconi.
8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.
9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.
10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
Arjun Roy.
11) Ignore routes with deleted nexthop object in mlxsw, from Ido
Schimmel.
12) Need to undo tcp early demux lookup sometimes in nf_nat, from
Florian Westphal.
13) Fix gro aggregation for udp encaps with zero csum, from Daniel
Borkmann.
14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
Donenfeld.
15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.
16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.
17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
Oltean.
18) Make sure textsearch copntrol block is large enough, from Wilem de
Bruijn.
19) Revert MAC changes to r8152 leading to instability, from Hates Wang.
20) Advance iov in 9p even for empty reads, from Jissheng Zhang.
21) Double hook unregister in nftables, from PabloNeira Ayuso.
22) Fix memleak in ixgbe, fropm Dinghao Liu.
23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.
24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
Tang.
25) Fix DOI refcount bugs in cipso, from Paul Moore.
26) One too many irqsave in ibmvnic, from Junlin Yang.
27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
Balazs Nemeth.
* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
s390/qeth: fix notification for pending buffers during teardown
s390/qeth: schedule TX NAPI on QAOB completion
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix memory leak after failed TX Buffer allocation
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: dsa: xrs700x: check if partner is same as port in hsr join
net: lapbether: Remove netif_start_queue / netif_stop_queue
atm: idt77252: fix null-ptr-dereference
atm: uPD98402: fix incorrect allocation
atm: fix a typo in the struct description
net: qrtr: fix error return code of qrtr_sendmsg()
mptcp: fix length of ADD_ADDR with port sub-option
net: bonding: fix error return code of bond_neigh_init()
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: enetc: set MAC RX FIFO to recommended value
net: davicom: Use platform_get_irq_optional()
net: davicom: Fix regulator not turned off on driver removal
net: davicom: Fix regulator not turned off on failed probe
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
...
Linus Torvalds [Wed, 10 Mar 2021 01:08:41 +0000 (17:08 -0800)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
"Fix opcode filtering for exceptions, and clean up defconfig"
* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
sparc: sparc64_defconfig: remove duplicate CONFIGs
sparc64: Fix opcode filtering in handling of no fault loads
Corentin Labbe [Mon, 8 Mar 2021 09:51:26 +0000 (09:51 +0000)]
sparc: sparc64_defconfig: remove duplicate CONFIGs
After my patch there is CONFIG_ATA defined twice.
Remove the duplicate one.
Same problem for CONFIG_HAPPYMEAL, except I added as builtin for boot
test with NFS.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
a57cdeb369ef ("sparc: sparc64_defconfig: add necessary configs for qemu")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rob Gardner [Mon, 1 Mar 2021 05:48:16 +0000 (22:48 -0700)]
sparc64: Fix opcode filtering in handling of no fault loads
is_no_fault_exception() has two bugs which were discovered via random
opcode testing with stress-ng. Both are caused by improper filtering
of opcodes.
The first bug can be triggered by a floating point store with a no-fault
ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode
C1A01040.
The code first tests op3[5] (0x1000000), which denotes a floating
point instruction, and then tests op3[2] (0x200000), which denotes a
store instruction. But these bits are not mutually exclusive, and the
above mentioned opcode has both bits set. The intent is to filter out
stores, so the test for stores must be done first in order to have
any effect.
The second bug can be triggered by a floating point load with one of
the invalid ASI values 0x8e or 0x8f, which pass this check in
is_no_fault_exception():
if ((asi & 0xf2) == ASI_PNF)
An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38",
opcode
CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal
in handle_ldf_stq(), and is_no_fault_exception() must not allow these
invalid asi values to make it that far.
In both of these cases, handle_ldf_stq() reacts by calling
sun4v_data_access_exception() or spitfire_data_access_exception(),
which call is_no_fault_exception() and results in an infinite
recursion.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 10 Mar 2021 00:14:54 +0000 (16:14 -0800)]
Merge branch 's390-qeth-fixes'
Julian Wiedmann says:
====================
s390/qeth: fixes 2021-03-09
please apply the following patch series to netdev's net tree.
This brings one fix for a memleak in an error path of the setup code.
Also several fixes for dealing with pending TX buffers - two for old
bugs in their completion handling, and one recent regression in a
teardown path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Tue, 9 Mar 2021 16:52:21 +0000 (17:52 +0100)]
s390/qeth: fix notification for pending buffers during teardown
The cited commit reworked the state machine for pending TX buffers.
In qeth_iqd_tx_complete() it turned PENDING into a transient state, and
uses NEED_QAOB for buffers that get parked while waiting for their QAOB
completion.
But it missed to adjust the check in qeth_tx_complete_buf(). So if
qeth_tx_complete_pending_bufs() is called during teardown to drain
the parked TX buffers, we no longer raise a notification for af_iucv.
Instead of updating the checked state, just move this code into
qeth_tx_complete_pending_bufs() itself. This also gets rid of the
special-case in the common TX completion path.
Fixes:
8908f36d20d8 ("s390/qeth: fix af_iucv notification race")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Tue, 9 Mar 2021 16:52:20 +0000 (17:52 +0100)]
s390/qeth: schedule TX NAPI on QAOB completion
When a QAOB notifies us that a pending TX buffer has been delivered, the
actual TX completion processing by qeth_tx_complete_pending_bufs()
is done within the context of a TX NAPI instance. We shouldn't rely on
this instance being scheduled by some other TX event, but just do it
ourselves.
qeth_qdio_handle_aob() is called from qeth_poll(), ie. our main NAPI
instance. To avoid touching the TX queue's NAPI instance
before/after it is (un-)registered, reorder the code in qeth_open()
and qeth_stop() accordingly.
Fixes:
0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Tue, 9 Mar 2021 16:52:19 +0000 (17:52 +0100)]
s390/qeth: improve completion of pending TX buffers
The current design attaches a pending TX buffer to a custom
single-linked list, which is anchored at the buffer's slot on the
TX ring. The buffer is then checked for final completion whenever
this slot is processed during a subsequent TX NAPI poll cycle.
But if there's insufficient traffic on the ring, we might never make
enough progress to get back to this ring slot and discover the pending
buffer's final TX completion. In particular if this missing TX
completion blocks the application from sending further traffic.
So convert the custom single-linked list code to a per-queue list_head,
and scan this list on every TX NAPI cycle.
Fixes:
0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Tue, 9 Mar 2021 16:52:18 +0000 (17:52 +0100)]
s390/qeth: fix memory leak after failed TX Buffer allocation
When qeth_alloc_qdio_queues() fails to allocate one of the buffers that
back an Output Queue, the 'out_freeoutqbufs' path will free all
previously allocated buffers for this queue. But it misses to free the
half-finished queue struct itself.
Move the buffer allocation into qeth_alloc_output_queue(), and deal with
such errors internally.
Fixes:
0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 10 Mar 2021 00:12:20 +0000 (16:12 -0800)]
Merge branch 'virtio_net-infinite-loop'
Balazs Nemeth says:
====================
net: prevent infinite loop caused by incorrect proto from virtio_net_hdr_set_proto
These patches prevent an infinite loop for gso packets with a protocol
from virtio net hdr that doesn't match the protocol in the packet.
Note that packets coming from a device without
header_ops->parse_protocol being implemented will not be caught by
the check in virtio_net_hdr_to_skb, but the infinite loop will still
be prevented by the check in the gso layer.
Changes from v2 to v3:
- Remove unused *eth.
- Use MPLS_HLEN to also check if the MPLS header length is a multiple
of four.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Balazs Nemeth [Tue, 9 Mar 2021 11:31:01 +0000 (12:31 +0100)]
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
A packet with skb_inner_network_header(skb) == skb_network_header(skb)
and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers
from the packet. Subsequently, the call to skb_mac_gso_segment will
again call mpls_gso_segment with the same packet leading to an infinite
loop. In addition, ensure that the header length is a multiple of four,
which should hold irrespective of the number of stacked labels.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Balazs Nemeth [Tue, 9 Mar 2021 11:31:00 +0000 (12:31 +0100)]
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't
set) based on the type in the virtio net hdr, but the skb could contain
anything since it could come from packet_snd through a raw socket. If
there is a mismatch between what virtio_net_hdr_set_proto sets and
the actual protocol, then the skb could be handled incorrectly later
on.
An example where this poses an issue is with the subsequent call to
skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set
correctly. A specially crafted packet could fool
skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned.
Avoid blindly trusting the information provided by the virtio net header
by checking that the protocol in the packet actually matches the
protocol set by virtio_net_hdr_set_proto. Note that since the protocol
is only checked if skb->dev implements header_ops->parse_protocol,
packets from devices without the implementation are not checked at this
stage.
Fixes:
9274124f023b ("net: stricter validation of untrusted gso packets")
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
George McCollister [Mon, 8 Mar 2021 23:38:22 +0000 (17:38 -0600)]
net: dsa: xrs700x: check if partner is same as port in hsr join
Don't assign dp to partner if it's the same port that xrs700x_hsr_join
was called with. The partner port is supposed to be the other port in
the HSR/PRP redundant pair not the same port. This fixes an issue
observed in testing where forwarding between redundant HSR ports on this
switch didn't work depending on the order the ports were added to the
hsr device.
Fixes:
bd62e6f5e6a9 ("net: dsa: xrs700x: add HSR offloading support")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Tue, 9 Mar 2021 01:56:47 +0000 (17:56 -0800)]
bpf, x86: Use kvmalloc_array instead kmalloc_array in bpf_jit_comp
x86 bpf_jit_comp.c used kmalloc_array to store jited addresses
for each bpf insn. With a large bpf program, we have see the
following allocation failures in our production server:
page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP),
nodemask=(null),cpuset=/,mems_allowed=0"
Call Trace:
dump_stack+0x50/0x70
warn_alloc.cold.120+0x72/0xd2
? __alloc_pages_direct_compact+0x157/0x160
__alloc_pages_slowpath+0xcdb/0xd00
? get_page_from_freelist+0xe44/0x1600
? vunmap_page_range+0x1ba/0x340
__alloc_pages_nodemask+0x2c9/0x320
kmalloc_order+0x18/0x80
kmalloc_order_trace+0x1d/0xa0
bpf_int_jit_compile+0x1e2/0x484
? kmalloc_order_trace+0x1d/0xa0
bpf_prog_select_runtime+0xc3/0x150
bpf_prog_load+0x480/0x720
? __mod_memcg_lruvec_state+0x21/0x100
__do_sys_bpf+0xc31/0x2040
? close_pdeo+0x86/0xe0
do_syscall_64+0x42/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f2f300f7fa9
Code: Bad RIP value.
Dumped assembly:
ffffffff810b6d70 <bpf_int_jit_compile>:
; {
ffffffff810b6d70: e8 eb a5 b4 00 callq 0xffffffff81c01360 <__fentry__>
ffffffff810b6d75: 41 57 pushq %r15
...
ffffffff810b6f39: e9 72 fe ff ff jmp 0xffffffff810b6db0 <bpf_int_jit_compile+0x40>
; addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
ffffffff810b6f3e: 8b 45 0c movl 12(%rbp), %eax
; return __kmalloc(bytes, flags);
ffffffff810b6f41: be c0 0c 00 00 movl $3264, %esi
; addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
ffffffff810b6f46: 8d 78 01 leal 1(%rax), %edi
; if (unlikely(check_mul_overflow(n, size, &bytes)))
ffffffff810b6f49: 48 c1 e7 02 shlq $2, %rdi
; return __kmalloc(bytes, flags);
ffffffff810b6f4d: e8 8e 0c 1d 00 callq 0xffffffff81287be0 <__kmalloc>
; if (!addrs) {
ffffffff810b6f52: 48 85 c0 testq %rax, %rax
Change kmalloc_array() to kvmalloc_array() to avoid potential
allocation error for big bpf programs.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210309015647.3657852-1-yhs@fb.com
Yonghong Song [Tue, 9 Mar 2021 18:50:28 +0000 (10:50 -0800)]
bpf: Don't do bpf_cgroup_storage_set() for kuprobe/tp programs
For kuprobe and tracepoint bpf programs, kernel calls
trace_call_bpf() which calls BPF_PROG_RUN_ARRAY_CHECK()
to run the program array. Currently, BPF_PROG_RUN_ARRAY_CHECK()
also calls bpf_cgroup_storage_set() to set percpu
cgroup local storage with NULL value. This is
due to Commit
394e40a29788 ("bpf: extend bpf_prog_array to store
pointers to the cgroup storage") which modified
__BPF_PROG_RUN_ARRAY() to call bpf_cgroup_storage_set()
and this macro is also used by BPF_PROG_RUN_ARRAY_CHECK().
kuprobe and tracepoint programs are not allowed to call
bpf_get_local_storage() helper hence does not
access percpu cgroup local storage. Let us
change BPF_PROG_RUN_ARRAY_CHECK() not to
modify percpu cgroup local storage.
The issue is observed when I tried to debug [1] where
percpu data is overwritten due to
preempt_disable -> migration_disable
change. This patch does not completely fix the above issue,
which will be addressed separately, e.g., multiple cgroup
prog runs may preempt each other. But it does fix
any potential issue caused by tracing program
overwriting percpu cgroup storage:
- in a busy system, a tracing program is to run between
bpf_cgroup_storage_set() and the cgroup prog run.
- a kprobe program is triggered by a helper in cgroup prog
before bpf_get_local_storage() is called.
[1] https://lore.kernel.org/bpf/CAKH8qBuXCfUz=w8L+Fj74OaUpbosO29niYwTki7e3Ag044_aww@mail.gmail.com/T
Fixes:
394e40a29788 ("bpf: extend bpf_prog_array to store pointers to the cgroup storage")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/bpf/20210309185028.3763817-1-yhs@fb.com
Linus Torvalds [Tue, 9 Mar 2021 20:02:18 +0000 (12:02 -0800)]
Merge tag 'gpio-fixes-for-v5.12-rc3' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A bunch of fixes for the GPIO subsystem. We have two regressions in
the core code spotted right after the merge window, a series of fixes
for ACPI GPIO and a subsequent fix for a related regression in
gpio-pca953x + a minor tweak in .gitignore and a rework of handling of
the gpio-line-names to remedy a regression in stm32mp151.
Summary:
- fix two regressions in core GPIO subsystem code: one NULL-pointer
dereference and one list corruption
- read GPIO line names from fwnode instead of using the generic
device properties to fix a regression on stm32mp151
- fixes to ACPI GPIO and gpio-pca953x to handle a regression in IRQ
handling on Intel Galileo
- update .gitignore in GPIO selftests"
* tag 'gpio-fixes-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Read "gpio-line-names" from a firmware node
gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2
gpiolib: acpi: Allow to find GpioInt() resource by name and index
gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk
gpiolib: acpi: Add missing IRQF_ONESHOT
gpio: fix gpio-device list corruption
gpio: fix NULL-deref-on-deregistration regression
selftests: gpio: update .gitignore
Linus Torvalds [Tue, 9 Mar 2021 19:56:41 +0000 (11:56 -0800)]
Merge tag 'mips-fixes_5.12_1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for boot breakage because of misaligned FDTs
- fix for overwritten exception handlers
- enable MIPS optimized crypto for all MIPS CPUs to improve wireguard
performance
* tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kernel: Reserve exception base early to prevent corruption
MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes
crypto: mips/poly1305 - enable for all MIPS processors
MIPS: boot/compressed: Copy DTB to aligned address
Xie He [Sun, 7 Mar 2021 11:33:07 +0000 (03:33 -0800)]
net: lapbether: Remove netif_start_queue / netif_stop_queue
For the devices in this driver, the default qdisc is "noqueue",
because their "tx_queue_len" is 0.
In function "__dev_queue_xmit" in "net/core/dev.c", devices with the
"noqueue" qdisc are specially handled. Packets are transmitted without
being queued after a "dev->flags & IFF_UP" check. However, it's possible
that even if this check succeeds, "ops->ndo_stop" may still have already
been called. This is because in "__dev_close_many", "ops->ndo_stop" is
called before clearing the "IFF_UP" flag.
If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in
"__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it
checks "netif_xmit_stopped" and finds that the queue is already stopped.
In this case, it will complain that:
"Virtual device ... asks to queue packet!"
To prevent "__dev_queue_xmit" from generating this complaint, we should
not call "netif_stop_queue" in "ops->ndo_stop".
We also don't need to call "netif_start_queue" in "ops->ndo_open",
because after a netdev is allocated and registered, the
"__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need
to call "netif_start_queue" to clear it.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Bogendoerfer [Mon, 8 Mar 2021 09:24:47 +0000 (10:24 +0100)]
MIPS: kernel: Reserve exception base early to prevent corruption
BMIPS is one of the few platforms that do change the exception base.
After commit
2dcb39645441 ("memblock: do not start bottom-up allocations
with kernel_end") we started seeing BMIPS boards fail to boot with the
built-in FDT being corrupted.
Before the cited commit, early allocations would be in the [kernel_end,
RAM_END] range, but after commit they would be within [RAM_START +
PAGE_SIZE, RAM_END].
The custom exception base handler that is installed by
bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
memory region allocated by unflatten_and_copy_device_tree() thus
corrupting the FDT used by the kernel.
To fix this, we need to perform an early reservation of the custom
exception space. Additional we reserve the first 4k (1k for R3k) for
either normal exception vector space (legacy CPUs) or special vectors
like cache exceptions.
Huge thanks to Serge for analysing and proposing a solution to this
issue.
Fixes:
2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end")
Reported-by: Kamal Dasu <kdasu.kdev@gmail.com>
Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Linus Torvalds [Tue, 9 Mar 2021 06:01:58 +0000 (22:01 -0800)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc updates from David Miller:
"Just some more random bits from Al, including a conversion over to
generic extables"
* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
sparc32: take ->thread.flags out
sparc32: get rid of fake_swapper_regs
sparc64: get rid of fake_swapper_regs
sparc32: switch to generic extables
sparc32: switch copy_user.S away from range exception table entries
sparc32: get rid of range exception table entries in checksum_32.S
sparc32: switch __bzero() away from range exception table entries
sparc32: kill lookup_fault()
sparc32: don't bother with lookup_fault() in __bzero()
Tong Zhang [Mon, 8 Mar 2021 03:25:30 +0000 (22:25 -0500)]
atm: idt77252: fix null-ptr-dereference
this one is similar to the phy_data allocation fix in uPD98402, the
driver allocate the idt77105_priv and store to dev_data but later
dereference using dev->dev_data, which will cause null-ptr-dereference.
fix this issue by changing dev_data to phy_data so that PRIV(dev) can
work correctly.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tong Zhang [Mon, 8 Mar 2021 03:25:29 +0000 (22:25 -0500)]
atm: uPD98402: fix incorrect allocation
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this
dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock
(i.e dev->phy_data->lock) will result in a null-ptr-dereference.
I believe this is a typo and what it actually want to do is to allocate
phy_data instead of dev_data.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tong Zhang [Mon, 8 Mar 2021 03:25:28 +0000 (22:25 -0500)]
atm: fix a typo in the struct description
phy_data means private PHY data not date
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jia-Ju Bai [Mon, 8 Mar 2021 09:13:55 +0000 (01:13 -0800)]
net: qrtr: fix error return code of qrtr_sendmsg()
When sock_alloc_send_skb() returns NULL to skb, no error return code of
qrtr_sendmsg() is assigned.
To fix this bug, rc is assigned with -ENOMEM in this case.
Fixes:
194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Mon, 8 Mar 2021 09:00:04 +0000 (10:00 +0100)]
mptcp: fix length of ADD_ADDR with port sub-option
in current Linux, MPTCP peers advertising endpoints with port numbers use
a sub-option length that wrongly accounts for the trailing TCP NOP. Also,
receivers will only process incoming ADD_ADDR with port having such wrong
sub-option length. Fix this, making ADD_ADDR compliant to RFC8684 §3.4.1.
this can be verified running tcpdump on the kselftests artifacts:
unpatched kernel:
[root@bottarga mptcp]# tcpdump -tnnr unpatched.pcap | grep add-addr
reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
IP 10.0.1.1.10000 > 10.0.1.2.53078: Flags [.], ack 101, win 509, options [nop,nop,TS val
214459678 ecr
521312851,mptcp add-addr v1 id 1 a00:201:2774:2d88:7436:85c3:17fd:101], length 0
IP 10.0.1.2.53078 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val
521312852 ecr
214459678,mptcp add-addr[bad opt]]
patched kernel:
[root@bottarga mptcp]# tcpdump -tnnr patched.pcap | grep add-addr
reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
IP 10.0.1.1.10000 > 10.0.1.2.38178: Flags [.], ack 101, win 509, options [nop,nop,TS val
3728873902 ecr
2732713192,mptcp add-addr v1 id 1 10.0.2.1:10100 hmac 0xbccdfcbe59292a1f,nop,nop], length 0
IP 10.0.1.2.38178 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val
2732713195 ecr
3728873902,mptcp add-addr v1-echo id 1 10.0.2.1:10100,nop,nop], length 0
Fixes:
22fb85ffaefb ("mptcp: add port support for ADD_ADDR suboption writing")
CC: stable@vger.kernel.org # 5.11+
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer [Mon, 8 Mar 2021 14:59:23 +0000 (15:59 +0100)]
selftests/bpf: Tests using bpf_check_mtu BPF-helper input mtu_len param
Add tests that use mtu_len as input parameter in BPF-helper
bpf_check_mtu().
The BPF-helper is avail from both XDP and TC context. Add two tests
per context, one that tests below MTU and one that exceeds the MTU.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161521556358.3515614.5915221479709358964.stgit@firesoul
Jesper Dangaard Brouer [Mon, 8 Mar 2021 14:59:18 +0000 (15:59 +0100)]
bpf: BPF-helper for MTU checking add length input
The FIB lookup example[1] show how the IP-header field tot_len
(iph->tot_len) is used as input to perform the MTU check.
This patch extend the BPF-helper bpf_check_mtu() with the same ability
to provide the length as user parameter input, via mtu_len parameter.
This still needs to be done before the bpf_check_mtu() helper API
becomes frozen.
[1] samples/bpf/xdp_fwd_kern.c
Fixes:
34b2021cc616 ("bpf: Add BPF-helper for MTU checking")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161521555850.3515614.6533850861569774444.stgit@firesoul
Jia-Ju Bai [Mon, 8 Mar 2021 03:11:02 +0000 (19:11 -0800)]
net: bonding: fix error return code of bond_neigh_init()
When slave is NULL or slave_ops->ndo_neigh_setup is NULL, no error
return code of bond_neigh_init() is assigned.
To fix this bug, ret is assigned with -EINVAL in these cases.
Fixes:
9e99bfefdbce ("bonding: fix bond_neigh_init()")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 7 Mar 2021 13:23:39 +0000 (15:23 +0200)]
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
The txtime is passed to the driver in skb->skb_mstamp_ns, which is
actually in a union with skb->tstamp (the place where software
timestamps are kept).
Since commit
b50a5c70ffa4 ("net: allow simultaneous SW and HW transmit
timestamping"), __sock_recv_timestamp has some logic for making sure
that the two calls to skb_tstamp_tx:
skb_tx_timestamp(skb) # Software timestamp in the driver
-> skb_tstamp_tx(skb, NULL)
and
skb_tstamp_tx(skb, &shhwtstamps) # Hardware timestamp in the driver
will both do the right thing and in a race-free manner, meaning that
skb_tx_timestamp will deliver a cmsg with the software timestamp only,
and skb_tstamp_tx with a non-NULL hwtstamps argument will deliver a cmsg
with the hardware timestamp only.
Why are races even possible? Well, because although the software timestamp
skb->tstamp is private per skb, the hardware timestamp skb_hwtstamps(skb)
lives in skb_shinfo(skb), an area which is shared between skbs and their
clones. And skb_tstamp_tx works by cloning the packets when timestamping
them, therefore attempting to perform hardware timestamping on an skb's
clone will also change the hardware timestamp of the original skb. And
the original skb might have been yet again cloned for software
timestamping, at an earlier stage.
So the logic in __sock_recv_timestamp can't be as simple as saying
"does this skb have a hardware timestamp? if yes I'll send the hardware
timestamp to the socket, otherwise I'll send the software timestamp",
precisely because the hardware timestamp is shared.
Instead, it's quite the other way around: __sock_recv_timestamp says
"does this skb have a software timestamp? if yes, I'll send the software
timestamp, otherwise the hardware one". This works because the software
timestamp is not shared with clones.
But that means we have a problem when we attempt hardware timestamping
with skbs that don't have the skb->tstamp == 0. __sock_recv_timestamp
will say "oh, yeah, this must be some sort of odd clone" and will not
deliver the hardware timestamp to the socket. And this is exactly what
is happening when we have txtime enabled on the socket: as mentioned,
that is put in a union with skb->tstamp, so it is quite easy to mistake
it.
Do what other drivers do (intel igb/igc) and write zero to skb->tstamp
before taking the hardware timestamp. It's of no use to us now (we're
already on the TX confirmation path).
Fixes:
0d08c9ec7d6e ("enetc: add support time specific departure base on the qos etf")
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Marginean [Sun, 7 Mar 2021 13:23:38 +0000 (15:23 +0200)]
net: enetc: set MAC RX FIFO to recommended value
On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high
and may lead to RX lock-up under traffic at a rate higher than 6 Gbps.
Set it to 1 instead, as recommended by the hardware design team and by
later versions of the ENETC block guide.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Cercueil [Sun, 7 Mar 2021 13:17:49 +0000 (13:17 +0000)]
net: davicom: Use platform_get_irq_optional()
The second IRQ line really is optional, so use
platform_get_irq_optional() to obtain it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Cercueil [Sun, 7 Mar 2021 13:17:48 +0000 (13:17 +0000)]
net: davicom: Fix regulator not turned off on driver removal
We must disable the regulator that was enabled in the probe function.
Fixes:
7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Cercueil [Sun, 7 Mar 2021 13:17:47 +0000 (13:17 +0000)]
net: davicom: Fix regulator not turned off on failed probe
When the probe fails or requests to be defered, we must disable the
regulator that was previously enabled.
Fixes:
7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 7 Mar 2021 10:21:56 +0000 (12:21 +0200)]
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
Tobias reports that after the blamed patch, VLAN objects being added to
a bridge device are being added to all slave ports instead (swp2, swp3).
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
ip link set swp3 master br0
bridge vlan add dev br0 vid 100 self
This is because the fix was too broad: we made dsa_port_offloads_netdev
say "yes, I offload the br0 bridge" for all slave ports, but we didn't
add the checks whether the switchdev object was in fact meant for the
physical port or for the bridge itself. So we are reacting on events in
a way in which we shouldn't.
The reason why the fix was too broad is because the question itself,
"does this DSA port offload this netdev", was too broad in the first
place. The solution is to disambiguate the question and separate it into
two different functions, one to be called for each switchdev attribute /
object that has an orig_dev == net_bridge (dsa_port_offloads_bridge),
and the other for orig_dev == net_bridge_port (*_offloads_bridge_port).
In the case of VLAN objects on the bridge interface, this solves the
problem because we know that VLAN objects are per bridge port and not
per bridge. And when orig_dev is equal to the net_bridge, we offload it
as a bridge, but not as a bridge port; that's how we are able to skip
reacting on those events. Note that this is compatible with future plans
to have explicit offloading of VLAN objects on the bridge interface as a
bridge port (in DSA, this signifies that we should add that VLAN towards
the CPU port).
Fixes:
99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored")
Reported-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jia-Ju Bai [Sun, 7 Mar 2021 09:12:56 +0000 (01:12 -0800)]
net: wan: fix error return code of uhdlc_init()
When priv->rx_skbuff or priv->tx_skbuff is NULL, no error return code of
uhdlc_init() is assigned.
To fix this bug, ret is assigned with -ENOMEM in these cases.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jia-Ju Bai [Sun, 7 Mar 2021 08:40:12 +0000 (00:40 -0800)]
net: hisilicon: hns: fix error return code of hns_nic_clear_all_rx_fetch()
When hns_assemble_skb() returns NULL to skb, no error return code of
hns_nic_clear_all_rx_fetch() is assigned.
To fix this bug, ret is assigned with -ENOMEM in this case.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Grant Grundler [Sat, 6 Mar 2021 22:12:32 +0000 (14:12 -0800)]
net: usb: log errors to dmesg/syslog
Errors in protocol should be logged when the driver aborts operations.
If the driver can carry on and "humor" the device, then emitting
the message as debug output level is fine.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Grant Grundler [Sat, 6 Mar 2021 22:12:31 +0000 (14:12 -0800)]
net: usb: cdc_ncm: emit dev_err on error paths
Several error paths in bind/probe code will only emit
output using dev_dbg. But if we are going to fail the
bind/probe, emit related output with "err" priority.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bhaskar Chowdhury [Sat, 6 Mar 2021 21:20:28 +0000 (02:50 +0530)]
net: ethernet: chelsio: inline_crypto: Mundane typos fixed throughout the file chcr_ktls.c
Mundane typos fixes throughout the file.
s/establised/established/
s/availbale/available/
s/vaues/values/
s/Incase/In case/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Philipp Zabel [Fri, 5 Mar 2021 09:14:48 +0000 (10:14 +0100)]
net: dsa: bcm_sf2: simplify optional reset handling
As of commit
bb475230b8e5 ("reset: make optional functions really
optional"), the reset framework API calls use NULL pointers to describe
optional, non-present reset controls.
This allows to unconditionally return errors from
devm_reset_control_get_optional_exclusive.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Georgi Valkov [Mon, 8 Mar 2021 18:30:38 +0000 (10:30 -0800)]
libbpf: Fix INSTALL flag order
It was reported ([0]) that having optional -m flag between source and
destination arguments in install command breaks bpftools cross-build
on MacOS. Move -m to the front to fix this issue.
[0] https://github.com/openwrt/openwrt/pull/3959
Fixes:
7110d80d53f4 ("libbpf: Makefile set specified permission mode")
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210308183038.613432-1-andrii@kernel.org
Bjørn Mork [Sun, 7 Mar 2021 18:23:01 +0000 (19:23 +0100)]
MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes
The devicetree specification requires 8-byte alignment in
memory. This is now enforced by libfdt since commit
79edff12060f
("scripts/dtc: Update to upstream version
v1.6.0-51-g183df9e9c2b9")
which included the upstream commit
5e735860c478 ("libfdt: Check for
8-byte address alignment in fdt_ro_probe_()").
This broke the MIPS raw appended DTBs which would be appended to
the image immediately following the initramfs section. This ends
with a 32bit size, resulting in a 4-byte alignment of the DTB.
Fix by padding with zeroes to 8-bytes when MIPS_RAW_APPENDED_DTB
is defined.
Fixes:
79edff12060f ("scripts/dtc: Update to upstream version
v1.6.0-51-g183df9e9c2b9")
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Tal Lossos [Sun, 7 Mar 2021 12:09:48 +0000 (14:09 +0200)]
bpf: Change inode_storage's lookup_elem return value from NULL to -EBADF
bpf_fd_inode_storage_lookup_elem() returned NULL when getting a bad FD,
which caused -ENOENT in bpf_map_copy_value. -EBADF error is better than
-ENOENT for a bad FD behaviour.
The patch was partially contributed by CyberArk Software, Inc.
Fixes:
8ea636848aca ("bpf: Implement bpf_local_storage for inodes")
Signed-off-by: Tal Lossos <tallossos@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210307120948.61414-1-tallossos@gmail.com
Alexei Starovoitov [Sun, 7 Mar 2021 22:52:48 +0000 (14:52 -0800)]
bpf: Dont allow vmlinux BTF to be used in map_create and prog_load.
The syzbot got FD of vmlinux BTF and passed it into map_create which caused
crash in btf_type_id_size() when it tried to access resolved_ids. The vmlinux
BTF doesn't have 'resolved_ids' and 'resolved_sizes' initialized to save
memory. To avoid such issues disallow using vmlinux BTF in prog_load and
map_create commands.
Fixes:
5329722057d4 ("bpf: Assign ID to vmlinux BTF and return extra info for BTF in GET_OBJ_INFO")
Reported-by: syzbot+8bab8ed346746e7540e8@syzkaller.appspotmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210307225248.79031-1-alexei.starovoitov@gmail.com
Andy Shevchenko [Fri, 5 Mar 2021 12:02:40 +0000 (14:02 +0200)]
gpiolib: Read "gpio-line-names" from a firmware node
On STM32MP1, the GPIO banks are subnodes of pin-controller@
50002000,
see arch/arm/boot/dts/stm32mp151.dtsi. The driver for
pin-controller@
50002000 is in drivers/pinctrl/stm32/pinctrl-stm32.c
and iterates over all of its DT subnodes when registering each GPIO
bank gpiochip. Each gpiochip has:
- gpio_chip.parent = dev,
where dev is the device node of the pin controller
- gpio_chip.of_node = np,
which is the OF node of the GPIO bank
Therefore, dev_fwnode(chip->parent) != of_fwnode_handle(chip.of_node),
i.e. pin-controller@
50002000 != pin-controller@
50002000/gpio@5000*000.
The original code behaved correctly, as it extracted the "gpio-line-names"
from of_fwnode_handle(chip.of_node) = pin-controller@
50002000/gpio@5000*000.
To achieve the same behaviour, read property from the firmware node.
Fixes:
7cba1a4d5e162 ("gpiolib: generalize devprop_gpiochip_set_names() for device properties")
Reported-by: Marek Vasut <marex@denx.de>
Reported-by: Roman Guskov <rguskov@dh-electronics.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Andy Shevchenko [Thu, 25 Feb 2021 16:33:20 +0000 (18:33 +0200)]
gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2
The commit
0ea683931adb ("gpio: dwapb: Convert driver to using the
GPIO-lib-based IRQ-chip") indeliberately made a regression on how
IRQ line from GPIO I²C expander is handled. I.e. it reveals that
the quirk for Intel Galileo Gen 2 misses the part of setting IRQ type
which previously was predefined by gpio-dwapb driver. Now, we have to
reorganize the approach to call necessary parts, which can be done via
ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk.
Without this fix and with above mentioned change the kernel hangs
on the first IRQ event with:
gpio gpiochip3: Persistence not supported for GPIO 1
irq 32, desc:
62f8fb50, depth: 0, count: 0, unhandled: 0
->handle_irq():
41c7b0ab, handle_bad_irq+0x0/0x40
->irq_data.chip():
e03f1e72, 0xc2539218
->action():
0ecc7e6f
->action->handler():
8a3db21e, irq_default_primary_handler+0x0/0x10
IRQ_NOPROBE set
unexpected IRQ trap at vector 20
Fixes:
ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on:
0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Thu, 25 Feb 2021 16:33:19 +0000 (18:33 +0200)]
gpiolib: acpi: Allow to find GpioInt() resource by name and index
Currently only search by index is supported. However, in some cases
we might need to pass the quirks to the acpi_dev_gpio_irq_get().
For this, split out acpi_dev_gpio_irq_get_by() and replace
acpi_dev_gpio_irq_get() by calling above with NULL for name parameter.
Fixes:
ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on:
0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Andy Shevchenko [Thu, 25 Feb 2021 16:33:18 +0000 (18:33 +0200)]
gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk
On some systems the ACPI tables has wrong pin number and instead of
having a relative one it provides an absolute one in the global GPIO
number space.
Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk to cope with such cases.
Fixes:
ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on:
0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Yang Li [Tue, 23 Feb 2021 08:35:58 +0000 (16:35 +0800)]
gpiolib: acpi: Add missing IRQF_ONESHOT
fixed the following coccicheck:
./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no
primary handler requested without IRQF_ONESHOT
Make sure threaded IRQs without a primary handler are always request
with IRQF_ONESHOT
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Johan Hovold [Mon, 1 Mar 2021 09:05:19 +0000 (10:05 +0100)]
gpio: fix gpio-device list corruption
Make sure to hold the gpio_lock when removing the gpio device from the
gpio_devices list (when dropping the last reference) to avoid corrupting
the list when there are concurrent accesses.
Fixes:
ff2b13592299 ("gpio: make the gpiochip a real device")
Cc: stable@vger.kernel.org # 4.6
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Johan Hovold [Mon, 1 Mar 2021 09:05:18 +0000 (10:05 +0100)]
gpio: fix NULL-deref-on-deregistration regression
Fix a NULL-pointer deference when deregistering the gpio character
device that was introduced by the recent stub-driver hack. When the new
"driver" is unbound as part of deregistration, driver core clears the
driver-data pointer which is used to retrieve the struct gpio_device in
its release callback.
Fix this by using container_of() in the release callback as should have
been done all along.
Fixes:
4731210c09f5 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default")
Cc: Saravana Kannan <saravanak@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: syzbot+d27b4c8adbbff70fbfde@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Bartosz Golaszewski [Wed, 24 Feb 2021 18:53:16 +0000 (19:53 +0100)]
selftests: gpio: update .gitignore
The executable that we build for GPIO selftests was renamed to
gpio-mockup-cdev. Let's update .gitignore so that we don't show it
as an untracked file.
Fixes:
8bc395a6a2e2 ("selftests: gpio: rework and simplify test implementation")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Maciej W. Rozycki [Wed, 3 Mar 2021 01:16:04 +0000 (02:16 +0100)]
crypto: mips/poly1305 - enable for all MIPS processors
The MIPS Poly1305 implementation is generic MIPS code written such as to
support down to the original MIPS I and MIPS III ISA for the 32-bit and
64-bit variant respectively. Lift the current limitation then to enable
code for MIPSr1 ISA or newer processors only and have it available for
all MIPS processors.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes:
a11d055e7a64 ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
Cc: stable@vger.kernel.org # v5.5+
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Paul Cercueil [Wed, 3 Mar 2021 19:33:05 +0000 (19:33 +0000)]
MIPS: boot/compressed: Copy DTB to aligned address
Since 5.12-rc1, the Device Tree blob must now be properly aligned.
Therefore, the decompress routine must be careful to copy the blob at
the next aligned address after the kernel image.
This commit fixes the kernel sometimes not booting with a Device Tree
blob appended to it.
Fixes:
79edff12060f ("scripts/dtc: Update to upstream version
v1.6.0-51-g183df9e9c2b9")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Linus Torvalds [Sun, 7 Mar 2021 21:35:49 +0000 (13:35 -0800)]
Merge tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Perf tool fixes:
- Fix wrong skipping for per-die aggregation in 'perf stat'.
- Fix race in signal handling on large core count machines, setting
up signal handlers earlier.
- Fix -F for branch & mem modes in 'perf report'.
- Fix the condition checks for max number of NUMA nodes in 'perf
bench numa'.
- Fix crash in 'perf diff' error path.
- Fix filtering of empty build-ids in 'perf archive'.
- Ensure read cmdlines from libtraceevent are null terminated.
Recent regressions:
- Fix control fifo permissions in 'perf daemon'.
- Fix 'perf daemon' compile error with ASAN.
- Fix running 'perf daemon' test for non root user.
- Fix PERF_SAMPLE_WEIGHT_STRUCT 'perf test' failure on non-x86
arches.
- Fix event's PMU name parsing related to new drm/i915/gt
software-gt-awake-time event.
Fixes from compiler instrumentation:
- Fix leaks in 'perf test' entries, found using ASAN.
- Fix use-after-free when 'perf stat -r' option is used.
Arch specific:
- Fix bitmap for option om ARM's CS-ETM.
Documentation:
- Fix documentation of verbose options.
Build:
- Clean 'generated' directory used for creating the syscall table on
x86.
- Fix ccache usage in $(CC) when generating arch errno table.
- Cast (struct timeval).tv_sec when printing, fixing the build with
MUSL libc.
- Tighten snprintf() string precision to pass gcc check on some
32-bit arches.
- Update UAPI copies from the kernel sources.
- Fix regression on feature detection 'make clean' target"
* tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (44 commits)
perf cs-etm: Fix bitmap for option
perf trace: Fix race in signal handling
perf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches
perf report: Fix -F for branch & mem modes
perf tests x86: Move insn.h include to make sure it finds stddef.h
perf test: Support the ins_lat check in the X86 specific test
perf test: Fix sample-parsing failure on non-x86 platforms
perf archive: Fix filtering of empty build-ids
perf daemon: Fix compile error with Asan
perf stat: Fix use-after-free when -r option is used
libperf: Add perf_evlist__reset_id_hash()
perf stat: Fix wrong skipping for per-die aggregation
tools headers UAPI: Sync KVM's kvm.h and vmx.h headers with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
tools headers: Update syscall.tbl files to support mount_setattr
perf test: Fix cpu and thread map leaks in perf_time_to_tsc test
perf test: Fix cpu map leaks in cpu_map_print test
perf test: Fix a memory leak in thread_map_remove test
perf test: Fix a thread map leak in thread_map_synthesize test
...
Linus Torvalds [Sun, 7 Mar 2021 21:28:31 +0000 (13:28 -0800)]
Merge branch 'parisc-5.12-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Two small parisc architecture fixes: fix a linking failure reported by
the kernel test robot and remove a duplicate include"
* 'parisc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
arch/parisc/kernel: remove duplicate include in ptrace
parisc: Enable -mlong-calls gcc option with CONFIG_COMPILE_TEST
Linus Torvalds [Sun, 7 Mar 2021 21:24:44 +0000 (13:24 -0800)]
Merge tag 'powerpc-5.12-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One non-fix, the conversion of vio_driver->remove() to return void,
which touches various powerpc specific drivers.
Fix the privilege checks we do in our perf handling, which could cause
soft/hard lockups in some configurations.
Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is
offline in the second kernel.
Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).
Fix a bug in our VSX (vector) instruction emulation, which should only
be seen when doing VSX ops to cache inhibited mappings.
Three commits fixing various build issues with obscure configurations.
Thanks to Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph
Plattner, Greg Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria,
Tyrel Datwyler, and Uwe Kleine-König"
* tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/sstep: Fix VSX instruction emulation
powerpc/perf: Fix handling of privilege level checks in perf interrupt context
powerpc: Force inlining of mmu_has_feature to fix build failure
vio: make remove callback return void
powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit()
powerpc/603: Fix protection of user pages mapped with PROT_NONE
powerpc/pseries: Don't enforce MSI affinity with kdump
powerpc/4xx: Fix build errors from mfdcr()
Linus Torvalds [Sun, 7 Mar 2021 21:20:50 +0000 (13:20 -0800)]
Merge tag 'm68k-for-v5.12-tag2' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k fix from Geert Uytterhoeven:
"Fix virt_addr_valid() W=1 compiler warnings.
This is a single non-critical fix. As the build bots are now testing
all new code with W=1, these warnings are popping up everywhere,
confusing people. Hence I think it makes sense to silence it as soon
as possible"
* tag 'm68k-for-v5.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Fix virt_addr_valid() W=1 compiler warnings
David S. Miller [Sun, 7 Mar 2021 01:02:40 +0000 (17:02 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect enum type definition in nfnetlink_cthelper UAPI,
from Dmitry V. Levin.
2) Remove extra space in deprecated automatic helper assignment
notice, from Klemen Košir.
3) Drop early socket demux socket after NAT mangling, from
Florian Westphal. Add a test to exercise this bug.
4) Fix bogus invalid packet report in the conntrack TCP tracker,
also from Florian.
5) Fix access to xt[NFPROTO_UNSPEC] list with no mutex
in target/match_revfn(), from Vasily Averin.
6) Disallow updates on the table ownership flag.
7) Fix double hook unregistration of tables with owner.
8) Remove bogus check on the table owner in __nft_release_tables().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>