OSDN Git Service
Mike Galbraith [Sat, 18 Jan 2014 16:14:44 +0000 (17:14 +0100)]
sched/idle/x86: Optimize unnecessary mwait_idle() resched IPIs
commit
f8e617f4582995f7c25ef25b4167213120ad122b upstream.
To fully take advantage of MWAIT, apparently the CLFLUSH instruction needs
another quirk on certain CPUs: proper barriers around it on certain machines.
On a Q6600 SMP system, pipe-test scheduling performance, cross core,
improves significantly:
3.8.13 487.2 KHz 1.000
3.13.0-master 415.5 KHz .852
3.13.0-master+ 415.2 KHz .852 + restore mwait_idle
3.13.0-master++ 488.5 KHz 1.002 + restore mwait_idle + IPI fix
Since X86_BUG_CLFLUSH_MONITOR is already a quirk, don't create a separate
quirk for the extra smp_mb()s.
Signed-off-by: Mike Galbraith <bitbucket@online.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Malone <ibmalone@gmail.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1390061684.5566.4.camel@marge.simpson.net
[ Ported to recent kernel, added comments about the quirk. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Len Brown [Wed, 15 Jan 2014 05:37:34 +0000 (00:37 -0500)]
sched/idle/x86: Restore mwait_idle() to fix boot hangs, to improve power savings and to improve performance
commit
b253149b843f89cd300cbdbea27ce1f847506f99 upstream.
In Linux-3.9 we removed the mwait_idle() loop:
69fb3676df33 ("x86 idle: remove mwait_idle() and "idle=mwait" cmdline param")
The reasoning was that modern machines should be sufficiently
happy during the boot process using the default_idle() HALT
loop, until cpuidle loads and either acpi_idle or intel_idle
invoke the newer MWAIT-with-hints idle loop.
But two machines reported problems:
1. Certain Core2-era machines support MWAIT-C1 and HALT only.
MWAIT-C1 is preferred for optimal power and performance.
But if they support just C1, cpuidle never loads and
so they use the boot-time default idle loop forever.
2. Some laptops will boot-hang if HALT is used,
but will boot successfully if MWAIT is used.
This appears to be a hidden assumption in BIOS SMI,
that is presumably valid on the proprietary OS
where the BIOS was validated.
https://bugzilla.kernel.org/show_bug.cgi?id=60770
So here we effectively revert the patch above, restoring
the mwait_idle() loop. However, we don't bother restoring
the idle=mwait cmdline parameter, since it appears to add
no value.
Maintainer notes:
For 3.9, simply revert
69fb3676df
for 3.10, patch -F3 applies, fuzz needed due to __cpuinit use in
context For 3.11, 3.12, 3.13, this patch applies cleanly
Tested-by: Mike Galbraith <bitbucket@online.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Mike Galbraith <bitbucket@online.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Malone <ibmalone@gmail.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/345254a551eb5a6a866e048d7ab570fd2193aca4.1389763084.git.len.brown@intel.com
[ Ported to recent kernels. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Radim Krčmář [Thu, 2 Apr 2015 18:44:23 +0000 (20:44 +0200)]
x86: vdso: fix pvclock races with task migration
commit
80f7fdb1c7f0f9266421f823964fd1962681f6ce upstream.
If we were migrated right after __getcpu, but before reading the
migration_count, we wouldn't notice that we read TSC of a different
VCPU, nor that KVM's bug made pvti invalid, as only migration_count
on source VCPU is increased.
Change vdso instead of updating migration_count on destination.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Fixes:
0a4e6be9ca17 ("x86: kvm: Revert "remove sched notifier for cross-cpu migrations"")
Message-Id: <
1428000263-11892-1-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcelo Tosatti [Mon, 23 Mar 2015 23:21:51 +0000 (20:21 -0300)]
x86: kvm: Revert "remove sched notifier for cross-cpu migrations"
commit
0a4e6be9ca17c54817cf814b4b5aa60478c6df27 upstream.
The following point:
2. per-CPU pvclock time info is updated if the
underlying CPU changes.
Is not true anymore since "KVM: x86: update pvclock area conditionally,
on cpu migration".
Add task migration notification back.
Problem noticed by Andy Lutomirski.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Wed, 28 Jan 2015 00:06:02 +0000 (16:06 -0800)]
x86/asm/decoder: Fix and enforce max instruction size in the insn decoder
commit
91e5ed49fca09c2b83b262b9757d1376ee2b46c3 upstream.
x86 instructions cannot exceed 15 bytes, and the instruction
decoder should enforce that. Prior to
6ba48ff46f76, the
instruction length limit was implicitly set to 16, which was an
approximation of 15, but there is currently no limit at all.
Fix MAX_INSN_SIZE (it should be 15, not 16), and fix the decoder
to reject instructions that exceed MAX_INSN_SIZE.
Other than potentially confusing some of the decoder sanity
checks, I'm not aware of any actual problems that omitting this
check would cause, nor am I aware of any practical problems
caused by the MAX_INSN_SIZE error.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Fixes:
6ba48ff46f76 ("x86: Remove arbitrary instruction size limit ...
Link: http://lkml.kernel.org/r/f8f0bc9b8c58cfd6830f7d88400bf1396cbdcd0f.1422403511.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gu Zheng [Fri, 3 Apr 2015 00:44:47 +0000 (08:44 +0800)]
md: fix md io stats accounting broken
commit
74672d069b298b03e9f657fd70915e055739882e upstream.
Simon reported the md io stats accounting issue:
"
I'm seeing "iostat -x -k 1" print this after a RAID1 rebuild on 4.0-rc5.
It's not abnormal other than it's 3-disk, with one being SSD (sdc) and
the other two being write-mostly:
Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
sda 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
sdb 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
sdc 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 345.00 0.00 0.00 0.00 0.00 100.00
md2 0.00 0.00 0.00 0.00 0.00 0.00 0.00 58779.00 0.00 0.00 0.00 0.00 100.00
md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 12.00 0.00 0.00 0.00 0.00 100.00
"
The cause is commit "
18c0b223cf9901727ef3b02da6711ac930b4e5d4" uses the
generic_start_io_acct to account the disk stats rather than the open code,
but it also introduced the increase to .in_flight[rw] which is needless to
md. So we re-use the open code here to fix it.
Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Vadai [Mon, 27 Apr 2015 10:40:56 +0000 (13:40 +0300)]
net/mlx4_en: Prevent setting invalid RSS hash function
[ Upstream commit
b37069090b7c5615610a8aa6b36533d67b364d38 ]
mlx4_en_check_rxfh_func() was checking for hardware support before
setting a known RSS hash function, but didn't do any check before
setting unknown RSS hash function. Need to make it fail on such values.
In this occasion, moved the actual setting of the new value from the
check function into mlx4_en_set_rxfh().
Fixes:
947cbb0 ("net/mlx4_en: Support for configurable RSS hash function")
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 25 Apr 2015 16:35:24 +0000 (09:35 -0700)]
net: rfs: fix crash in get_rps_cpus()
[ Upstream commit
a31196b07f8034eba6a3487a1ad1bb5ec5cd58a5 ]
Commit
567e4b79731c ("net: rfs: add hash collision detection") had one
mistake :
RPS_NO_CPU is no longer the marker for invalid cpu in set_rps_cpu()
and get_rps_cpu(), as @next_cpu was the result of an AND with
rps_cpu_mask
This bug showed up on a host with 72 cpus :
next_cpu was 0x7f, and the code was trying to access percpu data of an
non existent cpu.
In a follow up patch, we might get rid of compares against nr_cpu_ids,
if we init the tables with 0. This is silly to test for a very unlikely
condition that exists only shortly after table initialization, as
we got rid of rps_reset_sock_flow() and similar functions that were
writing this RPS_NO_CPU magic value at flow dismantle : When table is
old enough, it never contains this value anymore.
Fixes:
567e4b79731c ("net: rfs: add hash collision detection")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Khoroshilov [Sat, 25 Apr 2015 01:07:03 +0000 (04:07 +0300)]
pxa168: fix double deallocation of managed resources
[ Upstream commit
0e03fd3e335d272bee88fe733d5fd13f5c5b7140 ]
Commit
43d3ddf87a57 ("net: pxa168_eth: add device tree support") starts
to use managed resources by adding devm_clk_get() and
devm_ioremap_resource(), but it leaves explicit iounmap() and clock_put()
in pxa168_eth_remove() and in failure handling code of pxa168_eth_probe().
As a result double free can happen.
The patch removes explicit resource deallocation. Also it converts
clk_disable() to clk_disable_unprepare() to make it symmetrical with
clk_prepare_enable().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 24 Apr 2015 23:05:01 +0000 (16:05 -0700)]
net: fix crash in build_skb()
[ Upstream commit
2ea2f62c8bda242433809c7f4e9eae1c52c40bbe ]
When I added pfmemalloc support in build_skb(), I forgot netlink
was using build_skb() with a vmalloc() area.
In this patch I introduce __build_skb() for netlink use,
and build_skb() is a wrapper handling both skb->head_frag and
skb->pfmemalloc
This means netlink no longer has to hack skb->head_frag
[ 1567.700067] kernel BUG at arch/x86/mm/physaddr.c:26!
[ 1567.700067] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[ 1567.700067] Dumping ftrace buffer:
[ 1567.700067] (ftrace buffer empty)
[ 1567.700067] Modules linked in:
[ 1567.700067] CPU: 9 PID: 16186 Comm: trinity-c182 Not tainted
4.0.0-next-20150424-sasha-00037-g4796e21 #2167
[ 1567.700067] task:
ffff880127efb000 ti:
ffff880246770000 task.ti:
ffff880246770000
[ 1567.700067] RIP: __phys_addr (arch/x86/mm/physaddr.c:26 (discriminator 3))
[ 1567.700067] RSP: 0018:
ffff8802467779d8 EFLAGS:
00010202
[ 1567.700067] RAX:
000041000ed8e000 RBX:
ffffc9008ed8e000 RCX:
000000000000002c
[ 1567.700067] RDX:
0000000000000004 RSI:
0000000000000000 RDI:
ffffffffb3fd6049
[ 1567.700067] RBP:
ffff8802467779f8 R08:
0000000000000019 R09:
ffff8801d0168000
[ 1567.700067] R10:
ffff8801d01680c7 R11:
ffffed003a02d019 R12:
ffffc9000ed8e000
[ 1567.700067] R13:
0000000000000f40 R14:
0000000000001180 R15:
ffffc9000ed8e000
[ 1567.700067] FS:
00007f2a7da3f700(0000) GS:
ffff8801d1000000(0000) knlGS:
0000000000000000
[ 1567.700067] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1567.700067] CR2:
0000000000738308 CR3:
000000022e329000 CR4:
00000000000007e0
[ 1567.700067] Stack:
[ 1567.700067]
ffffc9000ed8e000 ffff8801d0168000 ffffc9000ed8e000 ffff8801d0168000
[ 1567.700067]
ffff880246777a28 ffffffffad7c0a21 0000000000001080 ffff880246777c08
[ 1567.700067]
ffff88060d302e68 ffff880246777b58 ffff880246777b88 ffffffffad9a6821
[ 1567.700067] Call Trace:
[ 1567.700067] build_skb (include/linux/mm.h:508 net/core/skbuff.c:316)
[ 1567.700067] netlink_sendmsg (net/netlink/af_netlink.c:1633 net/netlink/af_netlink.c:2329)
[ 1567.774369] ? sched_clock_cpu (kernel/sched/clock.c:311)
[ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273)
[ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273)
[ 1567.774369] sock_sendmsg (net/socket.c:614 net/socket.c:623)
[ 1567.774369] sock_write_iter (net/socket.c:823)
[ 1567.774369] ? sock_sendmsg (net/socket.c:806)
[ 1567.774369] __vfs_write (fs/read_write.c:479 fs/read_write.c:491)
[ 1567.774369] ? get_lock_stats (kernel/locking/lockdep.c:249)
[ 1567.774369] ? default_llseek (fs/read_write.c:487)
[ 1567.774369] ? vtime_account_user (kernel/sched/cputime.c:701)
[ 1567.774369] ? rw_verify_area (fs/read_write.c:406 (discriminator 4))
[ 1567.774369] vfs_write (fs/read_write.c:539)
[ 1567.774369] SyS_write (fs/read_write.c:586 fs/read_write.c:577)
[ 1567.774369] ? SyS_read (fs/read_write.c:577)
[ 1567.774369] ? __this_cpu_preempt_check (lib/smp_processor_id.c:63)
[ 1567.774369] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2594 kernel/locking/lockdep.c:2636)
[ 1567.774369] ? trace_hardirqs_on_thunk (arch/x86/lib/thunk_64.S:42)
[ 1567.774369] system_call_fastpath (arch/x86/kernel/entry_64.S:261)
Fixes:
79930f5892e ("net: do not deplete pfmemalloc reserve")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 22 Apr 2015 14:33:36 +0000 (07:33 -0700)]
net: do not deplete pfmemalloc reserve
[ Upstream commit
79930f5892e134c6da1254389577fffb8bd72c66 ]
build_skb() should look at the page pfmemalloc status.
If set, this means page allocator allocated this page in the
expectation it would help to free other pages. Networking
stack can do that only if skb->pfmemalloc is also set.
Also, we must refrain using high order pages from the pfmemalloc
reserve, so __page_frag_refill() must also use __GFP_NOMEMALLOC for
them. Under memory pressure, using order-0 pages is probably the best
strategy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 23 Apr 2015 17:42:39 +0000 (10:42 -0700)]
tcp: avoid looping in tcp_send_fin()
[ Upstream commit
845704a535e9b3c76448f52af1b70e4422ea03fd ]
Presence of an unbound loop in tcp_send_fin() had always been hard
to explain when analyzing crash dumps involving gigantic dying processes
with millions of sockets.
Lets try a different strategy :
In case of memory pressure, try to add the FIN flag to last packet
in write queue, even if packet was already sent. TCP stack will
be able to deliver this FIN after a timeout event. Note that this
FIN being delivered by a retransmit, it also carries a Push flag
given our current implementation.
By checking sk_under_memory_pressure(), we anticipate that cooking
many FIN packets might deplete tcp memory.
In the case we could not allocate a packet, even with __GFP_WAIT
allocation, then not sending a FIN seems quite reasonable if it allows
to get rid of this socket, free memory, and not block the process from
eventually doing other useful work.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 22 Apr 2015 01:32:24 +0000 (18:32 -0700)]
tcp: fix possible deadlock in tcp_send_fin()
[ Upstream commit
d83769a580f1132ac26439f50068a29b02be535e ]
Using sk_stream_alloc_skb() in tcp_send_fin() is dangerous in
case a huge process is killed by OOM, and tcp_mem[2] is hit.
To be able to free memory we need to make progress, so this
patch allows FIN packets to not care about tcp_mem[2], if
skb allocation succeeded.
In a follow-up patch, we might abort tcp_send_fin() infinite loop
in case TIF_MEMDIE is set on this thread, as memory allocator
did its best getting extra memory already.
This patch reverts
d22e15371811 ("tcp: fix tcp fin memory accounting")
Fixes:
d22e15371811 ("tcp: fix tcp fin memory accounting")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Herbert [Mon, 20 Apr 2015 21:10:05 +0000 (14:10 -0700)]
ppp: call skb_checksum_complete_unset in ppp_receive_frame
[ Upstream commit
3dfb05340ec6676e6fc71a9ae87bbbe66d3c2998 ]
Call checksum_complete_unset in PPP receive to discard checksum-complete
value. PPP does not pull checksum for headers and also modifies packet
as in VJ compression.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Herbert [Mon, 20 Apr 2015 21:10:04 +0000 (14:10 -0700)]
net: add skb_checksum_complete_unset
[ Upstream commit
4e18b9adf2f910ec4d30b811a74a5b626e6c6125 ]
This function changes ip_summed to CHECKSUM_NONE if CHECKSUM_COMPLETE
is set. This is called to discard checksum-complete when packet
is being modified and checksum is not pulled for headers in a layer.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Pöhn [Mon, 20 Apr 2015 07:19:20 +0000 (09:19 +0200)]
ip_forward: Drop frames with attached skb->sk
[ Upstream commit
2ab957492d13bb819400ac29ae55911d50a82a13 ]
Initial discussion was:
[FYI] xfrm: Don't lookup sk_policy for timewait sockets
Forwarded frames should not have a socket attached. Especially
tw sockets will lead to panics later-on in the stack.
This was observed with TPROXY assigning a tw socket and broken
policy routing (misconfigured). As a result frame enters
forwarding path instead of input. We cannot solve this in
TPROXY as it cannot know that policy routing is broken.
v2:
Remove useless comment
Signed-off-by: Sebastian Poehn <sebastian.poehn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 29 Apr 2015 08:22:30 +0000 (10:22 +0200)]
Linux 4.0.1
Jann Horn [Sun, 19 Apr 2015 00:48:39 +0000 (02:48 +0200)]
fs: take i_mutex during prepare_binprm for set[ug]id executables
commit
8b01fc86b9f425899f8a3a8fc1c47d73c2c20543 upstream.
This prevents a race between chown() and execve(), where chowning a
setuid-user binary to root would momentarily make the binary setuid
root.
This patch was mostly written by Linus Torvalds.
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herbert Xu [Thu, 16 Apr 2015 01:03:27 +0000 (09:03 +0800)]
skbuff: Do not scrub skb mark within the same name space
[ Upstream commit
213dd74aee765d4e5f3f4b9607fef0cf97faa2af ]
On Wed, Apr 15, 2015 at 05:41:26PM +0200, Nicolas Dichtel wrote:
> Le 15/04/2015 15:57, Herbert Xu a écrit :
> >On Wed, Apr 15, 2015 at 06:22:29PM +0800, Herbert Xu wrote:
> [snip]
> >Subject: skbuff: Do not scrub skb mark within the same name space
> >
> >The commit
ea23192e8e577dfc51e0f4fc5ca113af334edff9 ("tunnels:
> Maybe add a Fixes tag?
> Fixes:
ea23192e8e57 ("tunnels: harmonize cleanup done on skb on rx path")
>
> >harmonize cleanup done on skb on rx path") broke anyone trying to
> >use netfilter marking across IPv4 tunnels. While most of the
> >fields that are cleared by skb_scrub_packet don't matter, the
> >netfilter mark must be preserved.
> >
> >This patch rearranges skb_scurb_packet to preserve the mark field.
> nit: s/scurb/scrub
>
> Else it's fine for me.
Sure.
PS I used the wrong email for James the first time around. So
let me repeat the question here. Should secmark be preserved
or cleared across tunnels within the same name space? In fact,
do our security models even support name spaces?
---8<---
The commit
ea23192e8e577dfc51e0f4fc5ca113af334edff9 ("tunnels:
harmonize cleanup done on skb on rx path") broke anyone trying to
use netfilter marking across IPv4 tunnels. While most of the
fields that are cleared by skb_scrub_packet don't matter, the
netfilter mark must be preserved.
This patch rearranges skb_scrub_packet to preserve the mark field.
Fixes:
ea23192e8e57 ("tunnels: harmonize cleanup done on skb on rx path")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herbert Xu [Thu, 16 Apr 2015 08:12:53 +0000 (16:12 +0800)]
Revert "net: Reset secmark when scrubbing packet"
[ Upstream commit
4c0ee414e877b899f7fc80aafb98d9425c02797f ]
This patch reverts commit
b8fb4e0648a2ab3734140342002f68fb0c7d1602
because the secmark must be preserved even when a packet crosses
namespace boundaries. The reason is that security labels apply to
the system as a whole and is not per-namespace.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexei Starovoitov [Tue, 14 Apr 2015 22:57:13 +0000 (15:57 -0700)]
bpf: fix verifier memory corruption
[ Upstream commit
c3de6317d748e23b9e46ba36e10483728d00d144 ]
Due to missing bounds check the DAG pass of the BPF verifier can corrupt
the memory which can cause random crashes during program loading:
[8.449451] BUG: unable to handle kernel paging request at
ffffffffffffffff
[8.451293] IP: [<
ffffffff811de33d>] kmem_cache_alloc_trace+0x8d/0x2f0
[8.452329] Oops: 0000 [#1] SMP
[8.452329] Call Trace:
[8.452329] [<
ffffffff8116cc82>] bpf_check+0x852/0x2000
[8.452329] [<
ffffffff8116b7e4>] bpf_prog_load+0x1e4/0x310
[8.452329] [<
ffffffff811b190f>] ? might_fault+0x5f/0xb0
[8.452329] [<
ffffffff8116c206>] SyS_bpf+0x806/0xa30
Fixes:
f1bca824dabb ("bpf: add search pruning optimization to verifier")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 15 Apr 2015 01:45:00 +0000 (18:45 -0700)]
bnx2x: Fix busy_poll vs netpoll
[ Upstream commit
074975d0374333f656c48487aa046a21a9b9d7a1 ]
Commit
9a2620c877454 ("bnx2x: prevent WARN during driver unload")
switched the napi/busy_lock locking mechanism from spin_lock() into
spin_lock_bh(), breaking inter-operability with netconsole, as netpoll
disables interrupts prior to calling our napi mechanism.
This switches the driver into using atomic assignments instead of the
spinlock mechanisms previously employed.
Based on initial patch from Yuval Mintz & Ariel Elior
I basically added softirq starvation avoidance, and mixture
of atomic operations, plain writes and barriers.
Note this slightly reduces the overhead for this driver when no
busy_poll sockets are in use.
Fixes:
9a2620c877454 ("bnx2x: prevent WARN during driver unload")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 9 Apr 2015 20:31:56 +0000 (13:31 -0700)]
tcp: tcp_make_synack() should clear skb->tstamp
[ Upstream commit
b50edd7812852d989f2ef09dcfc729690f54a42d ]
I noticed tcpdump was giving funky timestamps for locally
generated SYNACK messages on loopback interface.
11:42:46.938990 IP 127.0.0.1.48245 > 127.0.0.2.23850: S
945476042:
945476042(0) win 43690 <mss 65495,nop,nop,sackOK,nop,wscale 7>
20:28:58.502209 IP 127.0.0.2.23850 > 127.0.0.1.48245: S
3160535375:
3160535375(0) ack
945476043 win 43690 <mss
65495,nop,nop,sackOK,nop,wscale 7>
This is because we need to clear skb->tstamp before
entering lower stack, otherwise net_timestamp_check()
does not set skb->tstamp.
Fixes:
7faee5c0d514 ("tcp: remove TCP_SKB_CB(skb)->when")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesse Gross [Thu, 9 Apr 2015 18:19:14 +0000 (11:19 -0700)]
udptunnels: Call handle_offloads after inserting vlan tag.
[ Upstream commit
b736a623bd099cdf5521ca9bd03559f3bc7fa31c ]
handle_offloads() calls skb_reset_inner_headers() to store
the layer pointers to the encapsulated packet. However, we
currently push the vlag tag (if there is one) onto the packet
afterwards. This changes the MAC header for the encapsulated
packet but it is not reflected in skb->inner_mac_header, which
breaks GSO and drivers which attempt to use this for encapsulation
offloads.
Fixes:
1eaa8178 ("vxlan: Add tx-vlan offload support.")
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 12 Apr 2015 22:12:50 +0000 (15:12 -0700)]
Linux 4.0
Linus Torvalds [Sun, 12 Apr 2015 17:56:12 +0000 (10:56 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs and fs fixes from Al Viro:
"Several AIO and OCFS2 fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ocfs2: _really_ sync the right range
ocfs2_file_write_iter: keep return value and current position update in sync
[regression] ocfs2: do *not* increment ->ki_pos twice
ioctx_alloc(): fix vma (and file) leak on failure
fix mremap() vs. ioctx_kill() race
Linus Torvalds [Sun, 12 Apr 2015 17:43:30 +0000 (10:43 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/evalenti/linux-soc-thermal
Pull last minute thermal-SoC management fixes from Eduardo Valentin:
"Specifics:
- Minor fixes on ST and RCAR thermal drivers.
- Avoid flooding kernel log when driver returns -EAGAIN.
Note: I am sending this pull on Rui's behalf while he fixes issues in
his Linux box"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
drivers: thermal: st: remove several sparse warnings
thermal: constify of_device_id array
thermal: Do not log an error if thermal_zone_get_temp returns -EAGAIN
thermal: rcar: Fix typo in r8a73a4 SoC name
Linus Torvalds [Sat, 11 Apr 2015 22:57:36 +0000 (15:57 -0700)]
Merge tag 'asoc-fix-v4.0-rc7' of git://git./linux/kernel/git/broonie/sound
Pull last-minute ASoC fix from Mark Brown:
"This patch backs out a change that came in during the merge window
which selects a configuration for GPIO4 on pcm512x CODECs that may not
be suitable for all systems using the device. Changes for v4.1 will
make this properly configurable but for now it's safest to revert to
the v3.19 behaviour and leave the pin configuration alone.
Sorry for sending this direct at the last minute but due to the GPIO
misuse it'd be really good to get it in the release and I'd not
realised it hadn't been sent yet - between some travel, a job change
and other non-urgent fixes coming in I'd lost track of the urgency.
It's been in -next for several weeks now, is isolated to the driver
and fairly clear to inspection"
* tag 'asoc-fix-v4.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4
Howard Mitchell [Mon, 23 Mar 2015 21:17:01 +0000 (21:17 +0000)]
ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4
Currently GPIO4 is hardcoded to output the pll-lock signal.
Unfortunately this is after the pll-out GPIO is configured which
is selectable in the device tree. Therefore it is not possible to
use GPIO4 for pll-out. Therefore this patch removes the
configuration of GPIO4.
Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Linus Torvalds [Sat, 11 Apr 2015 20:46:07 +0000 (13:46 -0700)]
Revert "dmaengine: Add a warning for drivers not using the generic slave caps retrieval"
This reverts commit
ecc19d17868be9c9f8f00ed928791533c420f3e0.
It added a new warning to try to encourage driver writers to set the
device capabities properly, but drivers haven't been updated and in the
meantime it just generaters a scary message that users cannot actually
do anything about.
Warnings like these are appropriate if you actually expect to fix the
code that causes them. They are not appropriate for releases.
Requested-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 9 Apr 2015 21:12:22 +0000 (14:12 -0700)]
blk-mq: initialize 'struct request' and associated data to zero
Jan Engelhardt reports a strange oops with an invalid ->sense_buffer
pointer in scsi_init_cmd_errh() with the blk-mq code.
The sense_buffer pointer should have been initialized by the call to
scsi_init_request() from blk_mq_init_rq_map(), but there seems to be
some non-repeatable memory corruptor.
This patch makes sure we initialize the whole struct request allocation
(and the associated 'struct scsi_cmnd' for the SCSI case) to zero, by
using __GFP_ZERO in the allocation. The old code initialized a couple
of individual fields, leaving the rest undefined (although many of them
are then initialized in later phases, like blk_mq_rq_ctx_init() etc.
It's not entirely clear why this matters, but it's the rigth thing to do
regardless, and with 4.0 imminent this is the defensive "let's just make
sure everything is initialized properly" patch.
Tested-by: Jan Engelhardt <jengelh@inai.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 11 Apr 2015 17:52:13 +0000 (10:52 -0700)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fix from Vinod Koul:
"I have one more fix to fix the boot warning on cppi driver due to
missing capabilities"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: cppi41: add missing bitfields
Linus Torvalds [Sat, 11 Apr 2015 17:47:17 +0000 (10:47 -0700)]
Merge tag 'for-linus-4.0-1' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull late ipmi fixes from Corey Minyard:
"Some annoying issues in the IPMI driver that would be good to have
fixed before 4.0 is released.
These got reported or discovered late, but they will avoid some
situations that would cause lots of log spam and in one case a
deadlock"
* tag 'for-linus-4.0-1' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi_ssif: Use interruptible completion for waiting in the thread
ipmi/powernv: Fix minor locking bug
ipmi: Handle BMCs that don't allow clearing the rcv irq bit
Felipe Balbi [Wed, 8 Apr 2015 16:45:42 +0000 (11:45 -0500)]
dmaengine: cppi41: add missing bitfields
Add missing directions, residue_granularity,
srd_addr_widths and dst_addr_widths bitfields.
Without those we will see a kernel WARN()
when loading musb on am335x devices.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Corey Minyard [Sat, 4 Apr 2015 06:54:26 +0000 (01:54 -0500)]
ipmi_ssif: Use interruptible completion for waiting in the thread
The code was using an normal completion, but that caused stuck
task errors after a while. Use an interruptible one to avoid that.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Alistair Popple [Fri, 10 Apr 2015 07:32:20 +0000 (17:32 +1000)]
ipmi/powernv: Fix minor locking bug
If ipmi_powernv_recv(...) is called without a current message it
prints a warning and returns. However it fails to release the message
lock causing the system to dead lock during any subsequent IPMI
operations.
This error path should never normally be taken unless there are bugs
elsewhere in the system.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Fri, 3 Apr 2015 17:13:48 +0000 (12:13 -0500)]
ipmi: Handle BMCs that don't allow clearing the rcv irq bit
Some BMCs don't let you clear the receive irq bit in the global
enables. This is kind of silly, but they give an error if you
try to clear it. Compensate for this by detecting the situation
and working around it.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Thomas D <whissi@whissi.de>
Reviewed-by: Thomas D <whissi@whissi.de>
Linus Torvalds [Sat, 11 Apr 2015 00:41:47 +0000 (17:41 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is our remaining set of three fixes for 4.0: two oops fixes(one
for cable pulls triggering oopses and the other be2iscsi specific) and
one warn on in sysfs on multipath devices using enclosures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
Defer processing of REQ_PREEMPT requests for blocked devices
be2iscsi: Fix kernel panic when device initialization fails
enclosure: fix WARN_ON removing an adapter in multi-path devices
Linus Torvalds [Fri, 10 Apr 2015 23:56:40 +0000 (16:56 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"Just a few small fixes:
Two from Andy, the first addresses a v4.0 target specific regression
to a user visible configfs attribute, and the second adds a set of
missing brackets around IPv6 discovery portal information within
iscsi-target.
And one from Mike that fixes an OOPs regression in traditional
iscsi-target when an iovec allocation fails, that has been present
since v3.10.y code. (CC'd to stable)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi target: fix oops when adding reject pdu
iscsi-target: TargetAddress in SendTargets should bracket ipv6 addresses
target: Allow userspace to write 1 to attrib/emulate_fua_write
Mike Christie [Fri, 10 Apr 2015 07:47:27 +0000 (02:47 -0500)]
iscsi target: fix oops when adding reject pdu
This fixes a oops due to a double list add when adding a reject PDU for
iscsit_allocate_iovecs allocation failures. The cmd has already been
added to the conn_cmd_list in iscsit_setup_scsi_cmd, so this has us call
iscsit_reject_cmd.
Note that for ERL0 the reject PDU is not actually sent, so this patch
is not completely tested. Just verified we do not oops. The problem is the
add reject functions return -1 which is returned all the way up to
iscsi_target_rx_thread which for ERL0 will drop the connection.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Linus Torvalds [Fri, 10 Apr 2015 18:16:54 +0000 (11:16 -0700)]
Merge tag 'sound-4.0' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are fixes gathered for 4.0-final; one FireFire endian fix, two
USB-audio quirks, and three HD-audio quirks.
All relatively small and device-specific fixes, should be pretty safe
to apply"
* tag 'sound-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support
ALSA: hda - Fix headphone pin config for Lifebook T731
ALSA: bebob: fix to processing in big-endian machine for sending cue
ALSA: hda/realtek - Make more stable to get pin sense for ALC283
ALSA: usb-audio: don't try to get Benchmark DAC1 sample rate
ALSA: hda/realtek - Support Dell headset mode for ALC256
Linus Torvalds [Fri, 10 Apr 2015 17:51:34 +0000 (10:51 -0700)]
Merge tag 'nios2-fixes-v4.0-final' of git://git.rocketboards.org/linux-socfpga-next
Pull arch/nios2 fixes from Ley Foon Tan:
"There are 3 arch/nios2 fixes for 4.0 final:
- fix cache coherency issue when debugging with gdb
- move restart_block to struct task_struct (aligned with other
architectures)
- fix for missing registers defines for ptrace"
* tag 'nios2-fixes-v4.0-final' of git://git.rocketboards.org/linux-socfpga-next:
nios2: fix cache coherency issue when debug with gdb
nios2: add missing ptrace registers defines
nios2: signal: Move restart_block to struct task_struct
Ley Foon Tan [Fri, 10 Apr 2015 03:10:08 +0000 (11:10 +0800)]
nios2: fix cache coherency issue when debug with gdb
Remove the end address checking for flushda function. We need to flush
each address line for flushda instruction, from start to end address.
This is because flushda instruction only flush the cache if tag and line
fields are matched.
Change to use ldwio instruction (bypass cache) to load the instruction
that causing trap. Our interest is the actual instruction that executed
by the processor, this should be uncached.
Note, EA address might be an userspace cached address.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Linus Torvalds [Fri, 10 Apr 2015 00:44:27 +0000 (17:44 -0700)]
Merge tag 'pm+acpi-4.0-rc8' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are stable-candidate fixes of some recently reported issues in
the cpufreq core, cpuidle core, the ACPI cpuidle driver and the
hibernate core.
Specifics:
- Revert a 3.17 hibernate commit that was supposed to fix an issue
related to e820 reserved regions, but broke resume from hibernation
on Lenovo x230 (Rafael J Wysocki).
- Prevent the ACPI cpuidle driver from overwriting the name and
description of the C0 state set by the core when the list of
C-states changes (Thomas Schlichter).
- Remove the no longer needed state_count field from struct
cpuidle_device which prevents the list of C-states shown by the
sysfs interface from becoming incorrect when the current number of
them is different from the number of C-states on boot (Bartlomiej
Zolnierkiewicz).
- The cpufreq core updates the policy object of the only online CPU
during system resume to make it reflect the current hardware state,
but it always assumes that CPU to be CPU0 which need not be the
case, so fix the code to avoid that assumption (Viresh Kumar)"
* tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions"
cpuidle: ACPI: do not overwrite name and description of C0
cpuidle: remove state_count field from struct cpuidle_device
cpufreq: Schedule work for the first-online CPU on resume
Rafael J. Wysocki [Thu, 9 Apr 2015 21:25:23 +0000 (23:25 +0200)]
Merge branches 'pm-sleep', 'pm-cpufreq' and 'pm-cpuidle'
* pm-sleep:
Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions"
* pm-cpufreq:
cpufreq: Schedule work for the first-online CPU on resume
* pm-cpuidle:
cpuidle: ACPI: do not overwrite name and description of C0
cpuidle: remove state_count field from struct cpuidle_device
Linus Torvalds [Thu, 9 Apr 2015 17:17:44 +0000 (10:17 -0700)]
Merge tag 'pci-v4.0-fixes-3' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Here are some fixes for v4.0. I apologize for how late they are. We
were hoping for some better fixes, but couldn't get them polished in
time. These fix:
- a Xen domU oops with PCI passthrough devices
- a sparc T5 boot failure
- a STM SPEAr13xx crash (use after initdata freed)
- a cpcihp hotplug driver thinko
- an AER thinko that printed stack junk
Details:
Enumeration
- Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas)
Resource management
- Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas)
AER
- Avoid info leak in __print_tlp_header() (Rasmus Villemoes)
PCI device hotplug
- Add missing curly braces in cpci_configure_slot() (Dan Carpenter)
ST Microelectronics SPEAr13xx host bridge driver
- Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov)
* tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "sparc/PCI: Clip bridge windows to fit in upstream windows"
PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
PCI: cpcihp: Add missing curly braces in cpci_configure_slot()
PCI/AER: Avoid info leak in __print_tlp_header()
PCI: spear: Drop __initdata from spear13xx_pcie_driver
Dmitry M. Fedin [Thu, 9 Apr 2015 14:37:03 +0000 (17:37 +0300)]
ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support
Adds an entry for Creative USB X-Fi to the rc_config array in
mixer_quirks.c to allow use of volume knob on the device.
Adds support for newer X-Fi Pro card, known as "Model No. SB1095"
with USB ID "041e:3237"
Signed-off-by: Dmitry M. Fedin <dmitry.fedin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Al Viro [Wed, 8 Apr 2015 21:00:32 +0000 (17:00 -0400)]
ocfs2: _really_ sync the right range
"ocfs2 syncs the wrong range" had been broken; prior to it the
code was doing the wrong thing in case of O_APPEND, all right,
but _after_ it we were syncing the wrong range in 100% cases.
*ppos, aka iocb->ki_pos is incremented prior to that point,
so we are always doing sync on the area _after_ the one we'd
written to.
Spotted by Joseph Qi <joseph.qi@huawei.com> back in January;
unfortunately, I'd missed his mail back then ;-/
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ley Foon Tan [Thu, 9 Apr 2015 10:28:05 +0000 (18:28 +0800)]
nios2: add missing ptrace registers defines
These are all register available in nios2.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Linus Torvalds [Wed, 8 Apr 2015 22:12:25 +0000 (15:12 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Final drm fixes: one core locking imbalance regression, and a bunch of
i915 baytrail s/r fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: fix drm_mode_getconnector() locking imbalance regression
drm/i915/vlv: remove wait for previous GFX clk disable request
drm/i915/chv: Remove Wait for a previous gfx force-off
drm/i915/vlv: save/restore the power context base reg
Linus Torvalds [Wed, 8 Apr 2015 21:51:56 +0000 (14:51 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull ceph revert from Sage Weil:
"This corrects a recent misadventure with __GFP_MEMALLOC and
PF_MEMALLOC; it turns out it's not a good fit for RBD and we're better
off relying on dirty page throttling"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
Revert "libceph: use memalloc flags for net IO"
Linus Torvalds [Wed, 8 Apr 2015 21:42:49 +0000 (14:42 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"Three fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: numa: disable change protection for vma(VM_HUGETLB)
include/linux/dmapool.h: declare struct device
mm: move zone lock to a different cache line than order-0 free page lists
Linus Torvalds [Tue, 7 Apr 2015 17:33:49 +0000 (10:33 -0700)]
Copy the kernel module data from user space in chunks
Unlike most (all?) other copies from user space, kernel module loading
is almost unlimited in size. So we do a potentially huge
"copy_from_user()" when we copy the module data from user space to the
kernel buffer, which can be a latency concern when preemption is
disabled (or voluntary).
Also, because 'copy_from_user()' clears the tail of the kernel buffer on
failures, even a *failed* copy can end up wasting a lot of time.
Normally neither of these are concerns in real life, but they do trigger
when doing stress-testing with trinity. Running in a VM seems to add
its own overheadm causing trinity module load testing to even trigger
the watchdog.
The simple fix is to just chunk up the module loading, so that it never
tries to copy insanely big areas in one go. That bounds the latency,
and also the amount of (unnecessarily, in this case) cleared memory for
the failure case.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 6 Apr 2015 17:26:17 +0000 (10:26 -0700)]
x86: clean up/fix 'copy_in_user()' tail zeroing
The rule for 'copy_from_user()' is that it zeroes the remaining kernel
buffer even when the copy fails halfway, just to make sure that we don't
leave uninitialized kernel memory around. Because even if we check for
errors, some kernel buffers stay around after thge copy (think page
cache).
However, the x86-64 logic for user copies uses a copy_user_generic()
function for all the cases, that set the "zerorest" flag for any fault
on the source buffer. Which meant that it didn't just try to clear the
kernel buffer after a failure in copy_from_user(), it also tried to
clear the destination user buffer for the "copy_in_user()" case.
Not only is that pointless, it also means that the clearing code has to
worry about the tail clearing taking page faults for the user buffer
case. Which is just stupid, since that case shouldn't happen in the
first place.
Get rid of the whole "zerorest" thing entirely, and instead just check
if the destination is in kernel space or not. And then just use
memset() to clear the tail of the kernel buffer if necessary.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Airlie [Wed, 8 Apr 2015 20:59:50 +0000 (06:59 +1000)]
Merge tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel into drm-fixes
three commits, all cc: stable, to address Baytrail
suspend/resume issues.
* tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel:
drm/i915/vlv: remove wait for previous GFX clk disable request
drm/i915/chv: Remove Wait for a previous gfx force-off
drm/i915/vlv: save/restore the power context base reg
Al Viro [Wed, 8 Apr 2015 19:45:02 +0000 (15:45 -0400)]
ocfs2_file_write_iter: keep return value and current position update in sync
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 8 Apr 2015 19:41:17 +0000 (15:41 -0400)]
[regression] ocfs2: do *not* increment ->ki_pos twice
generic_file_direct_write() already does that. Broken by
"ocfs2: do not fallback to buffer I/O write if appending"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Takashi Iwai [Wed, 8 Apr 2015 18:47:55 +0000 (20:47 +0200)]
ALSA: hda - Fix headphone pin config for Lifebook T731
Some BIOS version of Fujitsu Lifebook T731 seems to set up the
headphone pin (0x21) without the assoc number 0x0f while it's set only
to the output on the docking port (0x1a). With the recent commit
[
03ad6a8c93b6: ALSA: hda - Fix "PCM" name being used on one DAC when
there are two DACs], this resulted in the weird mixer element
mapping where the headphone on the laptop is assigned as a shared
volume with the speaker and the docking port is assigned as an
individual headphone.
This patch improves the situation by correcting the headphone pin
config to the more appropriate value.
Reported-and-tested-by: Taylor Smock <smocktaylor@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Bart Van Assche [Wed, 4 Mar 2015 09:31:47 +0000 (10:31 +0100)]
Defer processing of REQ_PREEMPT requests for blocked devices
SCSI transport drivers and SCSI LLDs block a SCSI device if the
transport layer is not operational. This means that in this state
no requests should be processed, even if the REQ_PREEMPT flag has
been set. This patch avoids that a rescan shortly after a cable
pull sporadically triggers the following kernel oops:
BUG: unable to handle kernel paging request at
ffffc9001a6bc084
IP: [<
ffffffffa04e08f2>] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib]
Process rescan-scsi-bus (pid: 9241, threadinfo
ffff88053484a000, task
ffff880534aae100)
Call Trace:
[<
ffffffffa0718135>] srp_post_send+0x65/0x70 [ib_srp]
[<
ffffffffa071b9df>] srp_queuecommand+0x1cf/0x3e0 [ib_srp]
[<
ffffffffa0001ff1>] scsi_dispatch_cmd+0x101/0x280 [scsi_mod]
[<
ffffffffa0009ad1>] scsi_request_fn+0x411/0x4d0 [scsi_mod]
[<
ffffffff81223b37>] __blk_run_queue+0x27/0x30
[<
ffffffff8122a8d2>] blk_execute_rq_nowait+0x82/0x110
[<
ffffffff8122a9c2>] blk_execute_rq+0x62/0xf0
[<
ffffffffa000b0e8>] scsi_execute+0xe8/0x190 [scsi_mod]
[<
ffffffffa000b2f3>] scsi_execute_req+0xa3/0x130 [scsi_mod]
[<
ffffffffa000c1aa>] scsi_probe_lun+0x17a/0x450 [scsi_mod]
[<
ffffffffa000ce86>] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod]
[<
ffffffffa000dc2f>] __scsi_scan_target+0xdf/0x1f0 [scsi_mod]
[<
ffffffffa000dfa3>] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod]
[<
ffffffffa000edfb>] scsi_scan+0xdb/0xe0 [scsi_mod]
[<
ffffffffa000ee13>] store_scan+0x13/0x20 [scsi_mod]
[<
ffffffff811c8d9b>] sysfs_write_file+0xcb/0x160
[<
ffffffff811589de>] vfs_write+0xce/0x140
[<
ffffffff81158b53>] sys_write+0x53/0xa0
[<
ffffffff81464592>] system_call_fastpath+0x16/0x1b
[<
00007f611c9d9300>] 0x7f611c9d92ff
Reported-by: Max Gurtuvoy <maxg@mellanox.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
John Soni Jose [Thu, 12 Feb 2015 01:15:47 +0000 (06:45 +0530)]
be2iscsi: Fix kernel panic when device initialization fails
Kernel panic was happening as iscsi_host_remove() was called on
a host which was not yet added.
Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Takashi Sakamoto [Wed, 8 Apr 2015 16:15:03 +0000 (01:15 +0900)]
ALSA: bebob: fix to processing in big-endian machine for sending cue
Some M-Audio devices require to receive bootup command just after
powering on, while codes in BeBoB driver doesn't work properly in
big-endian machine because the command should be aligned by
little-endian.
This commit fixes this bug. This fix should go to stable kernel.
Cc: Takayuki Shiroma <t.shiroma.oki@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Bjorn Helgaas [Wed, 8 Apr 2015 15:04:55 +0000 (10:04 -0500)]
Revert "sparc/PCI: Clip bridge windows to fit in upstream windows"
This reverts commit
d63e2e1f3df904bf6bd150bdafb42ddbb3257ea8.
David Ahern reported that
d63e2e1f3df9 breaks booting on an 8-socket T5
sparc system. He also verified that the system boots with
d63e2e1f3df9
reverted. Yinghai has some fixes, but they need a little more polishing
than we can do before v4.0.
Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.com
Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.19+
Bjorn Helgaas [Tue, 24 Mar 2015 16:12:45 +0000 (11:12 -0500)]
PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
Booting a v3.18 or newer Xen domU kernel with PCI devices passed through
results in an oops (this is a 32-bit 3.13.11 dom0 with a 64-bit 4.4.0
hypervisor and 32-bit domU):
BUG: unable to handle kernel paging request at
0030303e
IP: [<
c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a
Call Trace:
[<
c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc
[<
c06b78e1>] ? pci_get_hp_params+0x111/0x4e0
[<
c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30
[<
c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4
[<
c0699d34>] ? pci_device_add+0x24/0x450
Don't look for ACPI configuration information if ACPI has been disabled.
I don't think this is the best fix, because we can boot plain Linux (no
Xen) with "acpi=off", and we don't need this check in pci_get_hp_params().
There should be a better fix that would make Xen domU work the same way.
The domU kernel has ACPI support but it has no AML. There should be a way
to initialize the ACPI data structures so things fail gracefully rather
than oopsing. This is an interim fix to address the regression.
Fixes:
6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=96301
Reported-by: Michael D Labriola <mlabriol@gdeb.com>
Tested-by: Michael D Labriola <mlabriol@gdeb.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.18+
Kailang Yang [Wed, 8 Apr 2015 08:34:00 +0000 (16:34 +0800)]
ALSA: hda/realtek - Make more stable to get pin sense for ALC283
Pin sense will active when power pin is wake up.
Power pin will not wake up immediately during resume state.
Add some delay to wait for power pin activated.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ley Foon Tan [Wed, 8 Apr 2015 05:44:18 +0000 (13:44 +0800)]
nios2: signal: Move restart_block to struct task_struct
See https://lkml.org/lkml/2014/10/29/643 and commit
f56141e3e2d9
("all arches, signal: move restart_block to struct task_struct")
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Tommi Rantala [Fri, 3 Apr 2015 07:45:29 +0000 (10:45 +0300)]
drm: fix drm_mode_getconnector() locking imbalance regression
Regression in commit
2caa80e72b57c6216aec6f6a11fcfb4fec46daa0
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sun Feb 22 11:38:36 2015 +0100
drm: Fix deadlock due to getconnector locking changes
If the drm_connector_find() call returns NULL, we should no longer
call drm_modeset_unlock() to avoid locking imbalance.
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Andy Grover [Tue, 31 Mar 2015 17:43:18 +0000 (10:43 -0700)]
iscsi-target: TargetAddress in SendTargets should bracket ipv6 addresses
"The domainname can be specified as either a DNS host name, a
dotted-decimal IPv4 address, or a bracketed IPv6 address as specified
in [RFC2732]."
See https://bugzilla.redhat.com/show_bug.cgi?id=
1206868
Reported-by: Kyle Brantley <kyle@averageurl.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Linus Torvalds [Wed, 8 Apr 2015 00:38:31 +0000 (17:38 -0700)]
Merge tag 'media/v3.20-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"A series of fixup patches for version 4.0:
- one VB2 core fixup, when stopping the stream;
- one VB2 core fixup for dma-contig memory type;
- driver fixes at rtl28xx, s5p (tv, jpeg, mfc, soc-camera, sh_veu,
cx23885, gspca"
* tag 'media/v3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] rtl28xxu: return success for unimplemented FE callback
[media] rtl2832: disable regmap register cache
[media] vb2: Fix dma_dir setting for dma-contig mem type
[media] media: s5p-mfc: fix broken pointer cast on 64bit arch
[media] media: s5p-mfc: fix mmap support for 64bit arch
[media] cx23885: fix querycap
[media] sh_veu: v4l2_dev wasn't set
[media] s5p-mfc: Fix NULL pointer dereference caused by not set q->lock
[media] s5p-jpeg: exynos3250: fix erroneous reset procedure
[media] s5p-tv: hdmi needs I2C support
[media] s5p-jpeg: Initialize cb and cr to zero
[media] media: fix gspca drivers build dependencies
[media] soc-camera: Fix devm_kfree() in soc_of_bind()
[media] media: atmel-isi: increase the burst length to improve the performance
[media] vb2: fix 'UNBALANCED' warnings when calling vb2_thread_stop()
Naoya Horiguchi [Tue, 7 Apr 2015 21:26:47 +0000 (14:26 -0700)]
mm: numa: disable change protection for vma(VM_HUGETLB)
Currently when a process accesses a hugetlb range protected with
PROTNONE, unexpected COWs are triggered, which finally puts the hugetlb
subsystem into a broken/uncontrollable state, where for example
h->resv_huge_pages is subtracted too much and wraps around to a very
large number, and the free hugepage pool is no longer maintainable.
This patch simply stops changing protection for vma(VM_HUGETLB) to fix
the problem. And this also allows us to avoid useless overhead of minor
faults.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Suggested-by: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Brown [Tue, 7 Apr 2015 21:26:44 +0000 (14:26 -0700)]
include/linux/dmapool.h: declare struct device
dmapool uses struct device in function arguments but relies on an
implicit inclusion to declare struct device causing warnings in some
configurations:
include/linux/dmapool.h:31:7: warning: 'struct device' declared inside parameter list
Fix this by adding a struct device declaration to the file.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Tue, 7 Apr 2015 21:26:41 +0000 (14:26 -0700)]
mm: move zone lock to a different cache line than order-0 free page lists
Huang Ying reported the following problem due to commit
3484b2de9499 ("mm:
rearrange zone fields into read-only, page alloc, statistics and page
reclaim lines") from the Intel performance tests
24b7e5819ad5cbef 3484b2de9499df23c4604a513b
---------------- --------------------------
%stddev %change %stddev
\ | \
152288 \261 0% -46.2% 81911 \261 0% aim7.jobs-per-min
237 \261 0% +85.6% 440 \261 0% aim7.time.elapsed_time
237 \261 0% +85.6% 440 \261 0% aim7.time.elapsed_time.max
25026 \261 0% +70.7% 42712 \261 0% aim7.time.system_time
2186645 \261 5% +32.0%
2885949 \261 4% aim7.time.voluntary_context_switches
4576561 \261 1% +24.9%
5715773 \261 0% aim7.time.involuntary_context_switches
The problem is specific to very large machines under stress. It was not
reproducible with the machines I had used to justify the original patch
because large numbers of CPUs are required. When pressure is high enough,
the cache line is bouncing between CPUs trying to acquire the lock and the
holder of the lock adjusting free lists. The intention was that the
acquirer of the lock would automatically have the cache line holding the
free lists but according to Huang, this is not a universal win.
One possibility is to move the zone lock to its own cache line but it
increases the size of the zone. This patch moves the lock to the other
end of the free lists where they do not contend under high pressure. It
does mean the page allocator paths now require more cache lines but Huang
reports that it restores performance to previous levels on large machines
%stddev %change %stddev
\ | \
84568 \261 1% +94.3% 164280 \261 1% aim7.jobs-per-min
2881944 \261 2% -35.1%
1870386 \261 8% aim7.time.voluntary_context_switches
681 \261 1% -3.4% 658 \261 0% aim7.time.user_time
5538139 \261 0% -12.1%
4867884 \261 0% aim7.time.involuntary_context_switches
44174 \261 1% -46.0% 23848 \261 1% aim7.time.system_time
426 \261 1% -48.4% 219 \261 1% aim7.time.elapsed_time
426 \261 1% -48.4% 219 \261 1% aim7.time.elapsed_time.max
468 \261 1% -43.1% 266 \261 2% uptime.boot
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Huang Ying <ying.huang@intel.com>
Tested-by: Huang Ying <ying.huang@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eduardo Valentin [Tue, 7 Apr 2015 20:42:12 +0000 (13:42 -0700)]
drivers: thermal: st: remove several sparse warnings
Simple patch to make symbols static. Symbols that are not
shared with other parts of the kernel can be made static.
This change also removes several sparse complains.
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ajit Pal Singh <ajitpal.singh@st.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Fabian Frederick [Mon, 16 Mar 2015 19:17:09 +0000 (20:17 +0100)]
thermal: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Hans de Goede [Sat, 21 Mar 2015 14:02:55 +0000 (15:02 +0100)]
thermal: Do not log an error if thermal_zone_get_temp returns -EAGAIN
Some temperature sensors only get updated every few seconds and while
waiting for the first irq reporting a (new) temperature to happen there
get_temp operand will return -EAGAIN as it does not have any data to report
yet.
Not logging an error in this case avoids messages like these from showing
up in dmesg on affected systems:
[ 1.219353] thermal thermal_zone0: failed to read out thermal zone 0
[ 2.015433] thermal thermal_zone0: failed to read out thermal zone 0
[ 2.416737] thermal thermal_zone0: failed to read out thermal zone 0
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Geert Uytterhoeven [Wed, 18 Mar 2015 18:42:41 +0000 (19:42 +0100)]
thermal: rcar: Fix typo in r8a73a4 SoC name
r8a73a4 is R-Mobile APE6, not AP6.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Ilya Dryomov [Thu, 2 Apr 2015 11:40:58 +0000 (14:40 +0300)]
Revert "libceph: use memalloc flags for net IO"
This reverts commit
89baaa570ab0b476db09408d209578cfed700e9f.
Dirty page throttling should be sufficient for us in the general case
so there is no need to use __GFP_MEMALLOC - it would be needed only in
the swap-over-rbd case, which we currently don't support. (It would
probably take approximately the commit that is being reverted to add
that support, but we would also need the "swap" option to distinguish
from the general case and make sure swap ceph_client-s aren't shared
with anything else.) See ceph-devel threads [1] and [2] for the
details of why enabling pfmemalloc reserves for all cases is a bad
thing.
On top of potential system lockups related to drained emergency
reserves, this turned out to cause ceph lockups in case peers are on
the same host and communicating via loopback due to sk_filter()
dropping pfmemalloc skbs on the receiving side because the receiving
loopback socket is not tagged with SOCK_MEMALLOC.
[1] "SOCK_MEMALLOC vs loopback"
http://www.spinics.net/lists/ceph-devel/msg22998.html
[2] "[PATCH] libceph: don't set memalloc flags in loopback case"
http://www.spinics.net/lists/ceph-devel/msg23392.html
Conflicts:
net/ceph/messenger.c [ context: tcp_nodelay option ]
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sage Weil <sage@redhat.com>
Cc: stable@vger.kernel.org # 3.18+, needs backporting
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Mel Gorman <mgorman@suse.de>
Jesse Barnes [Wed, 1 Apr 2015 21:22:58 +0000 (14:22 -0700)]
drm/i915/vlv: remove wait for previous GFX clk disable request
Looks like it was introduced in:
commit
650ad970a39f8b6164fe8613edc150f585315289
Author: Imre Deak <imre.deak@intel.com>
Date: Fri Apr 18 16:35:02 2014 +0300
drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-of
but I'm not sure why. It has caused problems for us in the past (see
85250ddff7a6 "drm/i915/chv: Remove Wait for a previous gfx force-off"
and
8d4eee9cd7a1 "drm/i915: vlv: increase timeout when forcing on the
GFX clock") and doesn't seem to be required, so let's just drop it.
References: https://bugs.freedesktop.org/show_bug.cgi?id=89611
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Cc: stable@vger.kernel.org # c9c52e24194a: drm/i915/chv: Remove Wait ...
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Deepak S [Sat, 28 Mar 2015 09:53:34 +0000 (15:23 +0530)]
drm/i915/chv: Remove Wait for a previous gfx force-off
On CHV, PUNIT team confirmed that 'VLV_GFX_CLK_STATUS_BIT' is not a
sticky bit and it will always be set. So ignore Check for previous
Gfx force off during suspend and allow the force clk as part S0ix
Sequence
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Jesse Barnes [Wed, 1 Apr 2015 21:22:57 +0000 (14:22 -0700)]
drm/i915/vlv: save/restore the power context base reg
Some BIOSes (e.g. the one on the Minnowboard) don't save/restore this
reg. If it's unlocked, we can just restore the previous value, and if
it's locked (in case the BIOS re-programmed it for us) the write will be
ignored and we'll still have "did it move" sanity check in the PM code to
warn us if something is still amiss.
References: https://bugs.freedesktop.org/show_bug.cgi?id=89611
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Darren Hart <dvhart@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rafael J. Wysocki [Mon, 6 Apr 2015 23:07:39 +0000 (01:07 +0200)]
Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions"
Commit
84c91b7ae07c (PM / hibernate: avoid unsafe pages in e820 reserved
regions) is reported to make resume from hibernation on Lenovo x230
unreliable, so revert it.
We will revisit the issue the commit in question was supposed to fix
in the future.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=96111
Reported-by: rhn <kebuac.rhn@porcupinefactory.org>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Mon, 6 Apr 2015 22:39:45 +0000 (15:39 -0700)]
Linux 4.0-rc7
Linus Torvalds [Mon, 6 Apr 2015 22:19:59 +0000 (15:19 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
previously SACK'd, from Neal Cardwell.
2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
from Cong WANG.
3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
from Cong WANG.
4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.
5) When we encapsulate for a tunnel device, skb->sk still points to the
user socket. So this leads to cases where we retraverse the
ipv4/ipv6 output path with skb->sk being of some other address
family (f.e. AF_PACKET). This can cause things to crash since the
ipv4 output path is dereferencing an AF_PACKET socket as if it were
an ipv4 one.
The short term fix for 'net' and -stable is to elide these socket
checks once we've entered an encapsulation sequence by testing
xmit_recursion.
Longer term we have a better solution wherein we pass the tunnel's
socket down through the output paths, but that is way too invasive
for 'net' and -stable.
From Hannes Frederic Sowa.
6) l2tp_init() failure path forgets to unregister per-net ops, from
Cong WANG.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
net: dsa: fix filling routing table from OF description
l2tp: unregister l2tp_net_ops on failure path
mvneta: dont call mvneta_adjust_link() manually
ipv6: protect skb->sk accesses from recursive dereference inside the stack
netns: don't allocate an id for dead netns
Revert "netns: don't clear nsid too early on removal"
ip6mr: call del_timer_sync() in ip6mr_free_table()
net: move fib_rules_unregister() under rtnl lock
ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
tcp: fix FRTO undo on cumulative ACK of SACKed range
xen-netfront: transmit fully GSO-sized packets
Al Viro [Mon, 6 Apr 2015 21:57:44 +0000 (17:57 -0400)]
ioctx_alloc(): fix vma (and file) leak on failure
If we fail past the aio_setup_ring(), we need to destroy the
mapping. We don't need to care about anybody having found ctx,
or added requests to it, since the last failure exit is exactly
the failure to make ctx visible to lookups.
Reproducer (based on one by Joe Mario <jmario@redhat.com>):
void count(char *p)
{
char s[80];
printf("%s: ", p);
fflush(stdout);
sprintf(s, "/bin/cat /proc/%d/maps|/bin/fgrep -c '/[aio] (deleted)'", getpid());
system(s);
}
int main()
{
io_context_t *ctx;
int created, limit, i, destroyed;
FILE *f;
count("before");
if ((f = fopen("/proc/sys/fs/aio-max-nr", "r")) == NULL)
perror("opening aio-max-nr");
else if (fscanf(f, "%d", &limit) != 1)
fprintf(stderr, "can't parse aio-max-nr\n");
else if ((ctx = calloc(limit, sizeof(io_context_t))) == NULL)
perror("allocating aio_context_t array");
else {
for (i = 0, created = 0; i < limit; i++) {
if (io_setup(1000, ctx + created) == 0)
created++;
}
for (i = 0, destroyed = 0; i < created; i++)
if (io_destroy(ctx[i]) == 0)
destroyed++;
printf("created %d, failed %d, destroyed %d\n",
created, limit - created, destroyed);
count("after");
}
}
Found-by: Joe Mario <jmario@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 6 Apr 2015 21:48:54 +0000 (17:48 -0400)]
fix mremap() vs. ioctx_kill() race
teach ->mremap() method to return an error and have it fail for
aio mappings in process of being killed
Note that in case of ->mremap() failure we need to undo move_page_tables()
we'd already done; we could call ->mremap() first, but then the failure of
move_page_tables() would require undoing whatever _successful_ ->mremap()
has done, which would be a lot more headache in general.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jack Morgenstein [Sun, 5 Apr 2015 14:50:48 +0000 (17:50 +0300)]
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
Commit
1daa4303b4ca ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.
Fixes:
1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Nakonechny [Sat, 4 Apr 2015 21:46:21 +0000 (00:46 +0300)]
net: dsa: fix filling routing table from OF description
According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.
However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.
This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.
To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.
This was tested on a custom board with two Marvell
88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.
Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 6 Apr 2015 21:10:08 +0000 (14:10 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Updates for the input subsystem - two more tweaks for ALPS driver to
work out kinks after splitting the touchpad, trackstick, and potential
external PS/2 mouse into separate input devices.
Changes to support ALPS SS4 devices (protocol V8) will be coming in
4.1..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: alps - document stick behavior for protocol V2
Input: alps - report V2 Dualpoint Stick events via the right evdev node
Input: alps - report interleaved bare PS/2 packets via dev3
WANG Cong [Fri, 3 Apr 2015 20:46:09 +0000 (13:46 -0700)]
l2tp: unregister l2tp_net_ops on failure path
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stas Sergeev [Wed, 1 Apr 2015 16:23:29 +0000 (19:23 +0300)]
mvneta: dont call mvneta_adjust_link() manually
mvneta_adjust_link() is a callback for of_phy_connect() and should
not be called directly. The result of calling it directly is as below:
Signed-off-by: David S. Miller <davem@davemloft.net>
hannes@stressinduktion.org [Wed, 1 Apr 2015 15:07:44 +0000 (17:07 +0200)]
ipv6: protect skb->sk accesses from recursive dereference inside the stack
We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.
ipv6 does not conform with this in three places:
1) ip6_fragment: we do consult ipv6_npinfo for frag_size
2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
loop the packet back to the local socket
3) ip6_skb_dst_mtu could query the settings from the user socket and
force a wrong MTU
Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.
Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hans de Goede [Sat, 4 Apr 2015 00:30:31 +0000 (17:30 -0700)]
Input: alps - document stick behavior for protocol V2
Document that protocol V2 uses standard (bare) PS/2 mouse packets for the
DualPoint stick.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-By: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 4 Apr 2015 00:20:05 +0000 (17:20 -0700)]
Input: alps - report V2 Dualpoint Stick events via the right evdev node
On V2 devices the DualPoint Stick reports bare packets, these should be
reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also
has the INPUT_PROP_POINTING_STICK propbit set.
Note that since there is no way to distinguish these packets from an external
PS/2 mouse (insofar as these laptops have an external PS/2 port) this means
that we will be reporting PS/2 mouse events via this evdev node too, as we've
been doing in kernel 3.19 and older.
This has been tested on a Dell Latitude D620 and a Dell Latitude E6400,
which both have a V2 touchpad + a DualPoint Stick which reports bare packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 4 Apr 2015 00:14:40 +0000 (17:14 -0700)]
Input: alps - report interleaved bare PS/2 packets via dev3
Bare packets should be reported via the same evdev device independent on
whether they are detected on the beginning of a packet or in the middle
of a packet.
This has been tested on a Dell Latitude E6400, where the DualPoint Stick
reports bare packets, which get reported via dev3 when the touchpad is
idle, and via dev2 when the touchpad and stick are used simultaneously.
This commit fixes this inconsistency by always reporting bare packets via
dev3. Note that since the come from a DualPoint Stick they really should be
reported via dev2, this gets fixed in a later commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Sat, 4 Apr 2015 19:26:28 +0000 (12:26 -0700)]
Merge tag 'usb-4.0-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 4.0-rc6. Nothing
major, some xhci fixes for reported problems, and some usb-serial
device ids.
All have been in linux-next for a while"
* tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
usb: isp1760: fix spin unlock in the error path of isp1760_udc_start
usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
usb: xhci: handle Config Error Change (CEC) in xhci driver
USB: keyspan_pda: add new device id
USB: ftdi_sio: Added custom PID for Synapse Wireless product
Linus Torvalds [Sat, 4 Apr 2015 19:22:31 +0000 (12:22 -0700)]
Merge tag 'staging-4.0-rc6' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes, well, really all just IIO driver
fixes, for 4.0-rc6. They fix issues that have been reported with
these drivers.
All of these patches have been in linux-next for a while"
* tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: imu: Use iio_trigger_get for indio_dev->trig assignment
iio: adc: vf610: use ADC clock within specification
iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build
iio: core: Fix double free.
iio:inv-mpu6050: Fix inconsistency for the scale channel
staging: iio: dummy: Fix undefined symbol build error
iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
staging: iio: hmc5843: Set iio name property in sysfs
iio: bmc150: change sampling frequency
iio: fix drivers that check buffer->scan_mask
Linus Torvalds [Sat, 4 Apr 2015 19:11:57 +0000 (12:11 -0700)]
Merge tag 'tty-4.0-rc6' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 3 serial driver fixes for 4.0-rc6. They fix some reported
issues with the samsung and fsl_lpuart drivers.
All have been in linux-next for a while"
* tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: fsl_lpuart: clear receive flag on FIFO flush
tty: serial: fsl_lpuart: specify transmit FIFO size
serial: samsung: Clear operation mode on UART shutdown
Eric Wong [Tue, 31 Mar 2015 07:34:05 +0000 (07:34 +0000)]
ALSA: usb-audio: don't try to get Benchmark DAC1 sample rate
Adding this quirk allows us to avoid the noisy
"cannot get freq at ep 0x1" message in dmesg output every time
playback starts.
This ought to affect other Benchmark DAC1 variations using the same
"Microchip Technology, Inc." chip as well, but I have only tested
with the "Pre" variant.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Cc: Joe Turner <joe@oampo.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kailang Yang [Mon, 30 Mar 2015 09:05:37 +0000 (17:05 +0800)]
ALSA: hda/realtek - Support Dell headset mode for ALC256
Dell new platform of ALC256 audio codec.
Support headset mode for Dell ALC256 platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Fri, 3 Apr 2015 21:58:48 +0000 (14:58 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"A fix for ALPS driver for issue introduced in the latest update and a
tweak for yet another Lenovo box in Synaptics.
There will be more ALPS tweaks coming.."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: define INPUT_PROP_ACCELEROMETER behavior
Input: synaptics - fix min-max quirk value for E440
Input: synaptics - add quirk for Thinkpad E440
Input: ALPS - fix max coordinates for v5 and v7 protocols
Input: add MT_TOOL_PALM
Linus Torvalds [Fri, 3 Apr 2015 21:49:26 +0000 (14:49 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fix from Jens Axboe:
"Just one patch in this pull request, fixing a regression caused by a
'mathematically correct' change to lcm()"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix blk_stack_limits() regression due to lcm() change