FROMLIST: binder: fix memory corruption in binder_transaction binder

(from https://patchwork.kernel.org/patch/9939405/)

commit 7a4408c6bd3e ("binder: make sure accesses to proc/thread are
safe") made a change to enqueue tcomplete to thread->todo before
enqueuing the transaction. However, in err_dead_proc_or_thread case,
the tcomplete is directly freed, without dequeued. It may cause the
thread->todo list to be corrupted.

So, dequeue it before freeing.

Bug: 65333488
Change-Id: Id063a4db18deaa634f4d44aa6ebca47bea32537a
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
Signed-off-by: Todd Kjos <tkjos@google.com>

Merge 4.4.86 into android-4.4

Changes in 4.4.86
scsi: isci: avoid array subscript warning
ALSA: au88x0: Fix zero clear of stream->resources
btrfs: remove duplicate const specifier
i2c: jz4780: drop superfluous init
gcov: add support for gcc version >= 6
gcov: support GCC 7.1
lightnvm: initialize ppa_addr in dev_to_generic_addr()
p54: memset(0) whole array
lpfc: Fix Device discovery failures during switch reboot test.
arm64: mm: abort uaccess retries upon fatal signal
x86/io: Add "memory" clobber to insb/insw/insl/outsb/outsw/outsl
arm64: fpsimd: Prevent registers leaking across exec
scsi: sg: protect accesses to 'reserved' page array
scsi: sg: reset 'res_in_use' after unlinking reserved array
drm/i915: fix compiler warning in drivers/gpu/drm/i915/intel_uncore.c
Linux 4.4.86

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Linux 4.4.86

drm/i915: fix compiler warning in drivers/gpu/drm/i915/intel_uncore.c

When building with gcc-7, the following warning happens:

drivers/gpu/drm/i915/intel_uncore.c: In function ‘hsw_unclaimed_reg_detect’:
drivers/gpu/drm/i915/intel_uncore.c:638:36: warning: decrement of a boolean expression [-Wbool-operation]
   i915.mmio_debug = mmio_debug_once--;
                                    ^~

As it's really not wise to -- on a boolean value.

Commit 7571494004d8 ("drm/i915: Do one shot unclaimed mmio detection
less frequently") which showed up in 4.6-rc1 does solve this issue, by
rewriting the mmio detection logic, but that isn't really good to
backport to 4.4-stable, so just fix up the obvious logic here to do the
right thing.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sg: reset 'res_in_use' after unlinking reserved array

commit e791ce27c3f6a1d3c746fd6a8f8e36c9540ec6f9 upstream.

Once the reserved page array is unused we can reset the 'res_in_use'
state; here we can do a lazy update without holding the mutex as we only
need to check against concurrent access, not concurrent release.

[mkp: checkpatch]

Fixes: 1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page array")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sg: protect accesses to 'reserved' page array

commit 1bc0eb0446158cc76562176b80623aa119afee5b upstream.

The 'reserved' page array is used as a short-cut for mapping data,
saving us to allocate pages per request. However, the 'reserved' array
is only capable of holding one request, so this patch introduces a mutex
for protect 'sg_fd' against concurrent accesses.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[toddpoynor@google.com: backport to 3.18-4.9,  fixup for bad ioctl
SG_SET_FORCE_LOW_DMA code removed in later versions and not modified by
the original patch.]

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: fpsimd: Prevent registers leaking across exec

commit 096622104e14d8a1db4860bd557717067a0515d2 upstream.

There are some tricky dependencies between the different stages of
flushing the FPSIMD register state during exec, and these can race
with context switch in ways that can cause the old task's regs to
leak across.  In particular, a context switch during the memset() can
cause some of the task's old FPSIMD registers to reappear.

Disabling preemption for this small window would be no big deal for
performance: preemption is already disabled for similar scenarios
like updating the FPSIMD registers in sigreturn.

So, instead of rearranging things in ways that might swap existing
subtle bugs for new ones, this patch just disables preemption
around the FPSIMD state flushing so that races of this type can't
occur here.  This brings fpsimd_flush_thread() into line with other
code paths.

Fixes: 674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/io: Add "memory" clobber to insb/insw/insl/outsb/outsw/outsl

commit 7206f9bf108eb9513d170c73f151367a1bdf3dbf upstream.

The x86 version of insb/insw/insl uses an inline assembly that does
not have the target buffer listed as an output. This can confuse
the compiler, leading it to think that a subsequent access of the
buffer is uninitialized:

  drivers/net/wireless/wl3501_cs.c: In function ‘wl3501_mgmt_scan_confirm’:
  drivers/net/wireless/wl3501_cs.c:665:9: error: ‘sig.status’ is used uninitialized in this function [-Werror=uninitialized]
  drivers/net/wireless/wl3501_cs.c:668:12: error: ‘sig.cap_info’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
  drivers/net/sb1000.c: In function 'sb1000_rx':
  drivers/net/sb1000.c:775:9: error: 'st[0]' is used uninitialized in this function [-Werror=uninitialized]
  drivers/net/sb1000.c:776:10: error: 'st[1]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  drivers/net/sb1000.c:784:11: error: 'st[1]' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I tried to mark the exact input buffer as an output here, but couldn't
figure it out. As suggested by Linus, marking all memory as clobbered
however is good enough too. For the outs operations, I also add the
memory clobber, to force the input to be written to local variables.
This is probably already guaranteed by the "asm volatile", but it can't
hurt to do this for symmetry.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: http://lkml.kernel.org/r/20170719125310.2487451-5-arnd@arndb.de
Link: https://lkml.org/lkml/2017/7/12/605
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: abort uaccess retries upon fatal signal

commit 289d07a2dc6c6b6f3e4b8a62669320d99dbe6c3d upstream.

When there's a fatal signal pending, arm64's do_page_fault()
implementation returns 0. The intent is that we'll return to the
faulting userspace instruction, delivering the signal on the way.

However, if we take a fatal signal during fixing up a uaccess, this
results in a return to the faulting kernel instruction, which will be
instantly retried, resulting in the same fault being taken forever. As
the task never reaches userspace, the signal is not delivered, and the
task is left unkillable. While the task is stuck in this state, it can
inhibit the forward progress of the system.

To avoid this, we must ensure that when a fatal signal is pending, we
apply any necessary fixup for a faulting kernel instruction. Thus we
will return to an error path, and it is up to that code to make forward
progress towards delivering the fatal signal.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Laura Abbott <labbott@redhat.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Tested-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lpfc: Fix Device discovery failures during switch reboot test.

commit 342b59caa66240b670285d519fdfe2c44289b516 upstream.

When the switch is rebooted, the lpfc driver fails to log
into the fabric, and Unexpected timeout message is seen.

Fix: Do not issue RegVFI if the FLOGI was internally aborted.

Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

p54: memset(0) whole array

commit 6f17581788206444cbbcdbc107498f85e9765e3d upstream.

gcc 7 complains:
drivers/net/wireless/intersil/p54/fwio.c: In function 'p54_scan':
drivers/net/wireless/intersil/p54/fwio.c:491:4: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]

Fix that by passing the correct size to memset.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: initialize ppa_addr in dev_to_generic_addr()

commit 5389a1dfb39786df08d4f6a482bd2734b1b50e33 upstream.

The ->reserved bit is not initialized when allocated on stack.
This may lead targets to misinterpret the PPA as cached.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcov: support GCC 7.1

commit 05384213436ab690c46d9dfec706b80ef8d671ab upstream.

Starting from GCC 7.1, __gcov_exit is a new symbol expected to be
implemented in a profiling runtime.

[akpm@linux-foundation.org: coding-style fixes]
[mliska@suse.cz: v2]
Link: http://lkml.kernel.org/r/e63a3c59-0149-c97e-4084-20ca8f146b26@suse.cz
Link: http://lkml.kernel.org/r/8c4084fa-3885-29fe-5fc4-0d4ca199c785@suse.cz
Signed-off-by: Martin Liska <mliska@suse.cz>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcov: add support for gcc version >= 6

commit d02038f972538b93011d78c068f44514fbde0a8c upstream.

Link: http://lkml.kernel.org/r/20160701130914.GA23225@styxhp
Signed-off-by: Florian Meier <Florian.Meier@informatik.uni-erlangen.de>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: jz4780: drop superfluous init

commit 27bfeb5a0619554d9734fb39e14f0e80fa7c342c upstream.

David reported that the length for memset was incorrect (element sizes
were not taken into account). Then I saw that we are clearing kzalloced
memory, so we can simply drop this code.

Reported-by: David Binderman <dcb314@hotmail.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: remove duplicate const specifier

commit fb75d857a31d600cc0c37b8c7d914014f7fa3f9a upstream.

duplicate const is redundant so remove it

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: au88x0: Fix zero clear of stream->resources

commit 639db596165746ca87bbcb56559b094fd9042890 upstream.

There are a few calls of memset() to stream->resources, but they all
are called in a wrong size, sizeof(unsigned char) * VORTEX_RESOURCE_LAST,
while this field is a u32 array.  This may leave the memories not
zero-cleared.

Fix it by replacing them with a simpler sizeof(stream->resources)
instead.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: isci: avoid array subscript warning

commit 5cfa2a3c7342bd0b50716c8bb32ee491af43c785 upstream.

I'm getting a new warning with gcc-7:

isci/remote_node_context.c: In function 'sci_remote_node_context_destruct':
isci/remote_node_context.c:69:16: error: array subscript is above array bounds [-Werror=array-bounds]

This is odd, since we clearly cover all values for enum
scis_sds_remote_node_context_states here. Anyway, checking for an array
overflow can't harm and it makes the warning go away.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched: WALT: fix window mis-alignment

The initial window start needs to be close to ktime ns = 0 to be
aligned with scheduler tick.

Change-Id: Ia91f74efce2f910106622a054a6fcd507e763ca5
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>

sched: EAS: kill incorrect nohz idle cpu kick

EAS won't allow NOHZ idle balancer until CPU's over utilized.  However
nohz_kick_needed() can return true.  This causes idle CPU wake up for
nothing.

Change-Id: I6e548442e29e4f85cda695e4c7101dd591b12fe6
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>

sched: EAS: fix incorrect energy delta calculation due to rounding error

In order to calculate energy difference we currently iterates CPUs under
the same sched doamin to accumulate total energy cost and compare before
and after :

  for_each_domain(cpu)
          total_energy_before += (cpu_util * power) >> SCHED_CAPACITY_SHIFT;

  for_each_domain(cpu)
          total_energy_after += (cpu_util * power) >> SCHED_CAPACITY_SHIFT;

Doing such can incorrectly calculate and report abs(delta) > 0 when
there is actually no energy delta between before and after because the
same total accumulated cpu_util of all the CPUs can be distributed
differently before and after and it causes different amount of rounding
error.

Fix such incorrectness by shifting just once with accumulated
total_energy.

Change-Id: I82f1e2e358367058960938b4ef81714f57e921cf
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
(moved part to another commit)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>

sched: EAS/WALT: take into account of waking task's load

WALT's function cpu_util(cpu) reports CPU's load without taking into
account of waking task's load.  Thus currently cpu_overutilized()
underestimates load on the previous CPU of waking task.

Take into account of task's load to determine whether previous CPU is
overutilzed to bail out early without running energy_diff() which is
expensive.

Change-Id: I30f146984a880ad2cc1b8a4ce35bd239a8c9a607
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
(minor rebase conflicts)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>

cpufreq: sched: WALT: don't apply capacity margin twice

With WALT all the scheduler classes' load are accounted in scr->cfs and
update_cpu_capacity_request() adds capacity margin.  At present, at tick
path, scheduler also adds capacity margin.  Therefore the margin applied
twice.

Fix such error by using margin applied cpu utilization only for checking
whether frequency increase is needed.

Change-Id: Id7d8cc73b2e4eec70b274ca66e09bb0b16bf6f09
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
(trivial rebase conflict)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>

sched: WALT: fix potential overflow

Task demand and CPU util are in u64.

Change-Id: If7ec1623e723026d3346201122aab0303a6d2ba2
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>

sched: EAS: schedfreq: fix CPU util over estimation

WALT CPU utilization reports CPU load of all the scheduler classes.
Therefore adding RT class's load additionally will cause frequency
overshooting.  Fix such issue by not accounting RT class load when
requesting capacity.

Change-Id: I29600d7af7ca8c00e0d2ff1e13872024ccaa72bf
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>

sched: EAS/WALT: use cr_avg instead of prev_runnable_sum

WALT accounts two major statistics; CPU load and cumulative tasks
demand.

The CPU load which is account of accumulated each CPU's absolute
execution time is for CPU frequency guidance.  Whereas cumulative
tasks demand which is each CPU's instantaneous load to reflect
CPU's load at given time is for task placement decision.

Use cumulative tasks demand for cpu_util() for task placement and
introduce cpu_util_freq() for frequency guidance.

Change-Id: Id928f01dbc8cb2a617cdadc584c1f658022565c5
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>

sched: WALT: fix broken cumulative runnable average accounting

When running tasks's ravg.demand is changed update_history() adjusts
rq->cumulative_runnable_avg to reflect change of CPU load.  Currently
this fixup is broken by accumulating task's new demand without
subtracting the task's old demand.

Fix the fixup logic to subtract the task's old demand.

Change-Id: I61beb32a4850879ccb39b733f5564251e465bfeb
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>

sched: deadline: WALT: account cumulative runnable avg

Account cumulative runnable average for WALT CPU utilization accounting.

Change-Id: I56934894e626dec183740eeaf89a57d2ef638143
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>

FROMLIST: android: binder: Add page usage in binder stats

(from https://patchwork.kernel.org/patch/9928611/)

Add the number of active, lru, and free pages for
each binder process in binder stats

Bug: 63926541
Change-Id: I12618e4eb8ecc08f4f05fe4cba454a88830897f9
Signed-off-by: Sherry Yang <sherryy@android.com>

FROMLIST: android: binder: Add shrinker tracepoints

(from https://patchwork.kernel.org/patch/9928613/)

Add tracepoints in binder transaction allocator to
record lru hits and alloc/free page.

Bug: 63926541
Change-Id: I2e24fe8e7b6534349df4a87ff865a6843ac9a30b
Signed-off-by: Sherry Yang <sherryy@android.com>

FROMLIST: android: binder: Add global lru shrinker to binder

(from https://patchwork.kernel.org/patch/9928615/)

Hold on to the pages allocated and mapped for transaction
buffers until the system is under memory pressure. When
that happens, use linux shrinker to free pages. Without
using shrinker, patch "android: binder: Move buffer out
of area shared with user space" will cause a significant
slow down for small transactions that fit into the first
page because free list buffer header used to be inlined
with buffer data.

In addition to prevent the performance regression for
small transactions, this patch improves the performance
for transactions that take up more than one page.

Modify alloc selftest to work with the shrinker change.

Test: Run memory intensive applications (Chrome and Camera)
to trigger shrinker callbacks. Binder frees memory as expected.
Test: Run binderThroughputTest with high memory pressure
option enabled.

Bug: 63926541
Change-Id: I3abfc43b405e7e0a6228da37e0689a4b944f0e00
Signed-off-by: Sherry Yang <sherryy@android.com>

FROMLIST: android: binder: Move buffer out of area shared with user space

(from https://patchwork.kernel.org/patch/9928607/)

Binder driver allocates buffer meta data in a region that is mapped
in user space. These meta data contain pointers in the kernel.

This patch allocates buffer meta data on the kernel heap that is
not mapped in user space, and uses a pointer to refer to the data mapped.

Also move alloc->buffers initialization from mmap to init since it's
now used even when mmap failed or was not called.

Bug: 36007193
Change-Id: Id5136048bdb7b796f59de066de7ea7df410498f5
Signed-off-by: Sherry Yang <sherryy@android.com>

FROMLIST: android: binder: Add allocator selftest

(from https://patchwork.kernel.org/patch/9928609/)

binder_alloc_selftest tests that alloc_new_buf handles page allocation and
deallocation properly when allocate and free buffers. The test allocates 5
buffers of various sizes to cover all possible page alignment cases, and
frees the buffers using a list of exhaustive freeing order.

Test: boot the device with ANDROID_BINDER_IPC_SELFTEST config option
enabled. Allocator selftest passes.

Bug: 36007193
Change-Id: I2fe396232b7dfe4bbc50bdba99ca0de9be63cc37
Signed-off-by: Sherry Yang <sherryy@android.com>

FROMLIST: android: binder: Refactor prev and next buffer into a helper function

(from https://patchwork.kernel.org/patch/9928605/)

Use helper functions buffer_next and buffer_prev instead
of list_entry to get the next and previous buffers.

Bug: 36007193
Change-Id: I422dce84afde3d2138a6d976593b109a9cc49003
Signed-off-by: Sherry Yang <sherryy@android.com>

android: android-base.config: enable IP6_NF_MATCH_RPFILTER

USB tethering has a hard dependency on ip6t_rpfilter module now.
So enable IP6_NF_MATCH_RPFILTER config to make it work again,
otherwise we run into following failures when we try to enable
USB tethering on Hikey:

W IptablesRestoreController: iptables-restore process 1893 terminated status=256
E IptablesRestoreController: iptables error:
E IptablesRestoreController: ------- COMMAND -------
E IptablesRestoreController: *raw
E IptablesRestoreController: -A natctrl_raw_PREROUTING -i usb0 -m rpfilter --invert ! -s fe80::/64 -j DROP
E IptablesRestoreController: COMMIT
E IptablesRestoreController:
E IptablesRestoreController: ------- ERROR -------
E IptablesRestoreController: ip6tables-restore: line 319 failed
E IptablesRestoreController: ----------------------
E NatController: Error setting forward rules
E Tethering: [usb0] ERROR Exception enabling NAT: java.lang.IllegalStateException: command '55 nat enable
  usb0 wlan0 1 192.168.42.0/24' failed with '400 55 Nat operation failed (No such device)'

Change-Id: I4a4e192ee1c81a7a425eefee9a2a53dd41e1fa0e
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

UPSTREAM: cpufreq: schedutil: Use unsigned int for iowait boost

Make iowait_boost and iowait_boost_max as unsigned int since its unit is kHz
and this is consistent with struct cpufreq_policy. Also change the local
variables in sugov_iowait_boost to match this.

Change-Id: I6c67ed94c57c4bdb24bada4b97045593fcb95d2e
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>

UPSTREAM: cpufreq: schedutil: Make iowait boost more energy efficient

Currently the iowait_boost feature in schedutil makes the frequency go
to max on iowait wakeups.  This feature was added to handle a case that
Peter described where the throughput of operations involving continuous
I/O requests [1] is reduced due to running at a lower frequency, however
the lower throughput itself causes utilization to be low and hence
causing frequency to be low hence its "stuck".

Instead of going to max, its also possible to achieve the same effect by
ramping up to max if there are repeated in_iowait wakeups happening.
This patch is an attempt to do that. We start from a lower frequency
(policy->min) and double the boost for every consecutive iowait update
until we reach the maximum iowait boost frequency (iowait_boost_max).

I ran a synthetic test (continuous O_DIRECT writes in a loop) on an x86
machine with intel_pstate in passive mode using schedutil. In this test
the iowait_boost value ramped from 800MHz to 4GHz in 60ms. The patch
achieves the desired improved throughput as the existing behavior.

[1] https://patchwork.kernel.org/patch/9735885/

Change-Id: I4a018434a50f4ca29ec15b03465f6dc212e54423
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>

Merge 4.4.85 into android-4.4

Changes in 4.4.85
af_key: do not use GFP_KERNEL in atomic contexts
dccp: purge write queue in dccp_destroy_sock()
dccp: defer ccid_hc_tx_delete() at dismantle time
ipv4: fix NULL dereference in free_fib_info_rcu()
net_sched/sfq: update hierarchical backlog when drop packet
ipv4: better IP_MAX_MTU enforcement
sctp: fully initialize the IPv6 address in sctp_v6_to_addr()
tipc: fix use-after-free
ipv6: reset fn->rr_ptr when replacing route
ipv6: repair fib6 tree in failure case
tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP
irda: do not leak initialized list.dev to userspace
net: sched: fix NULL pointer dereference when action calls some targets
net_sched: fix order of queue length updates in qdisc_replace()
mei: me: add broxton pci device ids
mei: me: add lewisburg device ids
Input: trackpoint - add new trackpoint firmware ID
Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310
ALSA: core: Fix unexpected error at replacing user TLV
ALSA: hda - Add stereo mic quirk for Lenovo G50-70 (17aa:3978)
ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses
i2c: designware: Fix system suspend
drm: Release driver tracking before making the object available again
drm/atomic: If the atomic check fails, return its value first
drm: rcar-du: lvds: Fix PLL frequency-related configuration
drm: rcar-du: lvds: Rename PLLEN bit to PLLON
drm: rcar-du: Fix crash in encoder failure error path
drm: rcar-du: Fix display timing controller parameter
drm: rcar-du: Fix H/V sync signal polarity configuration
tracing: Fix freeing of filter in create_filter() when set_str is false
cifs: Fix df output for users with quota limits
cifs: return ENAMETOOLONG for overlong names in cifs_open()/cifs_lookup()
nfsd: Limit end of page list when decoding NFSv4 WRITE
perf/core: Fix group {cpu,task} validation
Bluetooth: hidp: fix possible might sleep error in hidp_session_thread
Bluetooth: cmtp: fix possible might sleep error in cmtp_session
Bluetooth: bnep: fix possible might sleep error in bnep_session
binder: use group leader instead of open thread
binder: Use wake up hint for synchronous transactions.
ANDROID: binder: fix proc->tsk check.
iio: imu: adis16480: Fix acceleration scale factor for adis16480
iio: hid-sensor-trigger: Fix the race with user space powering up sensors
staging: rtl8188eu: add RNX-N150NUB support
ASoC: simple-card: don't fail if sysclk setting is not supported
ASoC: rsnd: disable SRC.out only when stop timing
ASoC: rsnd: avoid pointless loop in rsnd_mod_interrupt()
ASoC: rsnd: Add missing initialization of ADG req_rate
ASoC: rsnd: ssi: 24bit data needs right-aligned settings
ASoC: rsnd: don't call update callback if it was NULL
ntb_transport: fix qp count bug
ntb_transport: fix bug calculating num_qps_mw
ACPI: ioapic: Clear on-stack resource before using it
ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal
Linux 4.4.85

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Linux 4.4.85

ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal

commit 7d64f82cceb21e6d95db312d284f5f195e120154 upstream.

When removing a GHES device notified by SCI, list_del_rcu() is used,
ghes_remove() should call synchronize_rcu() before it goes on to call
kfree(ghes), otherwise concurrent RCU readers may still hold this list
entry after it has been freed.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Fixes: 81e88fdc432a (ACPI, APEI, Generic Hardware Error Source POLL/IRQ/NMI notification type support)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: ioapic: Clear on-stack resource before using it

commit e3d5092b6756b9e0b08f94bbeafcc7afe19f0996 upstream.

The on-stack resource-window 'win' in setup_res() is not
properly initialized. This causes the pointers in the
embedded 'struct resource' to contain stale addresses.

These pointers (in my case the ->child pointer) later get
propagated to the global iomem_resources list, causing a #GP
exception when the list is traversed in
iomem_map_sanity_check().

Fixes: c183619b63ec (x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug)
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb_transport: fix bug calculating num_qps_mw

commit 8e8496e0e9564b66165f5219a4e8ed20b0d3fc6b upstream.

A divide by zero error occurs if qp_count is less than mw_count because
num_qps_mw is calculated to be zero. The calculation appears to be
incorrect.

The requirement is for num_qps_mw to be set to qp_count / mw_count
with any remainder divided among the earlier mws.

For example, if mw_count is 5 and qp_count is 12 then mws 0 and 1
will have 3 qps per window and mws 2 through 4 will have 2 qps per window.
Thus, when mw_num < qp_count % mw_count, num_qps_mw is 1 higher
than when mw_num >= qp_count.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb_transport: fix qp count bug

commit cb827ee6ccc3e480f0d9c0e8e53eef55be5b0414 upstream.

In cases where there are more mw's than spads/2-2, the mw count gets
reduced to match the limitation. ntb_transport also tries to ensure that
there are fewer qps than mws but uses the full mw count instead of
the reduced one. When this happens, the math in
'ntb_transport_setup_qp_mw' will get confused and result in a kernel
paging request bug.

This patch fixes the bug by reducing qp_count to the reduced mw count
instead of the full mw count.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: don't call update callback if it was NULL

commit d7289565483c65094d0473555625a4acd89567d3 upstream.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: ssi: 24bit data needs right-aligned settings

commit f46a93b820eb3707faf238cd769a004e2504515f upstream.

Data left/right aligned is controlled by PDTA bit on SSICR.
But default is left-aligned. Thus 24bit sound will be very small sound
without this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: Add missing initialization of ADG req_rate

commit 8b27418f300cafbdbbb8cfa9c29d398ed34d6723 upstream.

If the "clock-frequency" DT property is not found, req_rate is used
uninitialized, and the "audio_clkout" clock will be created with an
arbitrary clock rate.

This uninitialized kernel stack data may leak to userspace through
/sys/kernel/debug/clk/clk_summary, cfr. the value in the "rate" column:

       clock     enable_cnt  prepare_cnt        rate   accuracy   phase
    --------------------------------------------------------------------
     audio_clkout         0            0  4001836240          0 0

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: avoid pointless loop in rsnd_mod_interrupt()

commit 2daf71ad8da6cb57f919c9c876ee7e42530371df upstream.

Current Renesas sound driver doesn't have 1:1 relationship between
stream <-> mod because it is supporting MIX. Because of this reason
rsnd_mod_interrupt() is searching correspond mod by for loop.
But this loop is not needed, because each mod has own type.
This patch avoid pointless loop by using mod->type.

This patch is good for SSI-parent support, because stream might have
2 SSI as SSI-parent/child. SSI interrupt handler will be called twice
if stream has SSI-parent without this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: disable SRC.out only when stop timing

commit b761bf272bce6dff4d8a7ccf4385c9f3d4018094 upstream.

Because SRC is connected to DMA and DMA want to keep dreq when stop
timing. This patch makes SRC stop SRC.out only when stop timing. And
it stops both SRC.out/SRC.in when quit timing

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: simple-card: don't fail if sysclk setting is not supported

commit ee43a1a0cd2a8f33cddfa1323a60b5cfcf865ba0 upstream.

Commit e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk
with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes
asoc_simple_card_hw_params fail if the operation is not supported,
although the intention clearly was to ignore ENOTSUPP. Fix it.

The patch fixes audio playback on Kirkwood / OpenRD client,
where the following errors are seen:

asoc-simple-card sound: ASoC: machine hw_params failed: -524
alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524

Fixes: e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: add RNX-N150NUB support

commit f299aec6ebd747298e35934cff7709c6b119ca52 upstream.

Add support for USB Device Rosewill RNX-N150NUB.
VendorID: 0x0bda, ProductID: 0xffef

Signed-off-by: Charles Milette <charles.milette@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: hid-sensor-trigger: Fix the race with user space powering up sensors

commit f1664eaacec31035450132c46ed2915fd2b2049a upstream.

It has been reported for a while that with iio-sensor-proxy service the
rotation only works after one suspend/resume cycle. This required a wait
in the systemd unit file to avoid race. I found a Yoga 900 where I could
reproduce this.

The problem scenerio is:
- During sensor driver init, enable run time PM and also set a
  auto-suspend for 3 seconds.
This result in one runtime resume. But there is a check to avoid
a powerup in this sequence, but rpm is active
- User space iio-sensor-proxy tries to power up the sensor. Since rpm is
  active it will simply return. But sensors were not actually
powered up in the prior sequence, so actaully the sensors will not work
- After 3 seconds the auto suspend kicks

If we add a wait in systemd service file to fire iio-sensor-proxy after
3 seconds, then now everything will work as the runtime resume will
actually powerup the sensor as this is a user request.

To avoid this:
- Remove the check to match user requested state, this will cause a
  brief powerup, but if the iio-sensor-proxy starts immediately it will
still work as the sensors are ON.
- Also move the autosuspend delay to place when user requested turn off
  of sensors, like after user finished raw read or buffer disable

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: adis16480: Fix acceleration scale factor for adis16480

commit fdd0d32eb95f135041236a6885d9006315aa9a1d upstream.

According to the datasheet, the range of the acceleration is [-10 g, + 10 g],
so the scale factor should be 10 instead of 5.

Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ANDROID: binder: fix proc->tsk check.

commit b2a6d1b999a4c13e5997bb864694e77172d45250 upstream.

Commit c4ea41ba195d ("binder: use group leader instead of open thread")'
was incomplete and didn't update a check in binder_mmap(), causing all
mmap() calls into the binder driver to fail.

Signed-off-by: Martijn Coenen <maco@android.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: Use wake up hint for synchronous transactions.

commit 00b40d613352c623aaae88a44e5ded7c912909d7 upstream.

Use wake_up_interruptible_sync() to hint to the scheduler binder
transactions are synchronous wakeups. Disable preemption while waking
to avoid ping-ponging on the binder lock.

Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Omprakash Dhyade <odhyade@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: use group leader instead of open thread

commit c4ea41ba195d01c9af66fb28711a16cc97caa9c5 upstream.

The binder allocator assumes that the thread that
called binder_open will never die for the lifetime of
that proc. That thread is normally the group_leader,
however it may not be. Use the group_leader instead
of current.

Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: bnep: fix possible might sleep error in bnep_session

commit 25717382c1dd0ddced2059053e3ca5088665f7a5 upstream.

It looks like bnep_session has same pattern as the issue reported in
old rfcomm:

while (1) {
set_current_state(TASK_INTERRUPTIBLE);
if (condition)
break;
// may call might_sleep here
schedule();
}
__set_current_state(TASK_RUNNING);

Which fixed at:
dfb2fae Bluetooth: Fix nested sleeps

So let's fix it at the same way, also follow the suggestion of:
https://lwn.net/Articles/628628/

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: AL Yu-Chen Cho <acho@suse.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: cmtp: fix possible might sleep error in cmtp_session

commit f06d977309d09253c744e54e75c5295ecc52b7b4 upstream.

It looks like cmtp_session has same pattern as the issue reported in
old rfcomm:

while (1) {
set_current_state(TASK_INTERRUPTIBLE);
if (condition)
break;
// may call might_sleep here
schedule();
}
__set_current_state(TASK_RUNNING);

Which fixed at:
dfb2fae Bluetooth: Fix nested sleeps

So let's fix it at the same way, also follow the suggestion of:
https://lwn.net/Articles/628628/

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: AL Yu-Chen Cho <acho@suse.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hidp: fix possible might sleep error in hidp_session_thread

commit 5da8e47d849d3d37b14129f038782a095b9ad049 upstream.

It looks like hidp_session_thread has same pattern as the issue reported in
old rfcomm:

while (1) {
set_current_state(TASK_INTERRUPTIBLE);
if (condition)
break;
// may call might_sleep here
schedule();
}
__set_current_state(TASK_RUNNING);

Which fixed at:
dfb2fae Bluetooth: Fix nested sleeps

So let's fix it at the same way, also follow the suggestion of:
https://lwn.net/Articles/628628/

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: AL Yu-Chen Cho <acho@suse.com>
Tested-by: Rohit Vaswani <rvaswani@nvidia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Fix group {cpu,task} validation

commit 64aee2a965cf2954a038b5522f11d2cd2f0f8f3e upstream.

Regardless of which events form a group, it does not make sense for the
events to target different tasks and/or CPUs, as this leaves the group
inconsistent and impossible to schedule. The core perf code assumes that
these are consistent across (successfully intialised) groups.

Core perf code only verifies this when moving SW events into a HW
context. Thus, we can violate this requirement for pure SW groups and
pure HW groups, unless the relevant PMU driver happens to perform this
verification itself. These mismatched groups subsequently wreak havoc
elsewhere.

For example, we handle watchpoints as SW events, and reserve watchpoint
HW on a per-CPU basis at pmu::event_init() time to ensure that any event
that is initialised is guaranteed to have a slot at pmu::add() time.
However, the core code only checks the group leader's cpu filter (via
event_filter_match()), and can thus install follower events onto CPUs
violating thier (mismatched) CPU filters, potentially installing them
into a CPU without sufficient reserved slots.

This can be triggered with the below test case, resulting in warnings
from arch backends.

  #define _GNU_SOURCE
  #include <linux/hw_breakpoint.h>
  #include <linux/perf_event.h>
  #include <sched.h>
  #include <stdio.h>
  #include <sys/prctl.h>
  #include <sys/syscall.h>
  #include <unistd.h>

  static int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu,
   int group_fd, unsigned long flags)
  {
return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags);
  }

  char watched_char;

  struct perf_event_attr wp_attr = {
.type = PERF_TYPE_BREAKPOINT,
.bp_type = HW_BREAKPOINT_RW,
.bp_addr = (unsigned long)&watched_char,
.bp_len = 1,
.size = sizeof(wp_attr),
  };

  int main(int argc, char *argv[])
  {
int leader, ret;
cpu_set_t cpus;

/*
 * Force use of CPU0 to ensure our CPU0-bound events get scheduled.
 */
CPU_ZERO(&cpus);
CPU_SET(0, &cpus);
ret = sched_setaffinity(0, sizeof(cpus), &cpus);
if (ret) {
printf("Unable to set cpu affinity\n");
return 1;
}

/* open leader event, bound to this task, CPU0 only */
leader = perf_event_open(&wp_attr, 0, 0, -1, 0);
if (leader < 0) {
printf("Couldn't open leader: %d\n", leader);
return 1;
}

/*
 * Open a follower event that is bound to the same task, but a
 * different CPU. This means that the group should never be possible to
 * schedule.
 */
ret = perf_event_open(&wp_attr, 0, 1, leader, 0);
if (ret < 0) {
printf("Couldn't open mismatched follower: %d\n", ret);
return 1;
} else {
printf("Opened leader/follower with mismastched CPUs\n");
}

/*
 * Open as many independent events as we can, all bound to the same
 * task, CPU0 only.
 */
do {
ret = perf_event_open(&wp_attr, 0, 0, -1, 0);
} while (ret >= 0);

/*
 * Force enable/disble all events to trigger the erronoeous
 * installation of the follower event.
 */
printf("Opened all events. Toggling..\n");
for (;;) {
prctl(PR_TASK_PERF_EVENTS_DISABLE, 0, 0, 0, 0);
prctl(PR_TASK_PERF_EVENTS_ENABLE, 0, 0, 0, 0);
}

return 0;
  }

Fix this by validating this requirement regardless of whether we're
moving events.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhou Chengming <zhouchengming1@huawei.com>
Link: http://lkml.kernel.org/r/1498142498-15758-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Limit end of page list when decoding NFSv4 WRITE

commit fc788f64f1f3eb31e87d4f53bcf1ab76590d5838 upstream.

When processing an NFSv4 WRITE operation, argp->end should never
point past the end of the data in the final page of the page list.
Otherwise, nfsd4_decode_compound can walk into uninitialized memory.

More critical, nfsd4_decode_write is failing to increment argp->pagelen
when it increments argp->pagelist.  This can cause later xdr decoders
to assume more data is available than really is, which can cause server
crashes on malformed requests.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: return ENAMETOOLONG for overlong names in cifs_open()/cifs_lookup()

commit d3edede29f74d335f81d95a4588f5f136a9f7dcf upstream.

Add checking for the path component length and verify it is <= the maximum
that the server advertizes via FileFsAttributeInformation.

With this patch cifs.ko will now return ENAMETOOLONG instead of ENOENT
when users to access an overlong path.

To test this, try to cd into a (non-existing) directory on a CIFS share
that has a too long name:
cd /mnt/aaaaaaaaaaaaaaa...

and it now should show a good error message from the shell:
bash: cd: /mnt/aaaaaaaaaaaaaaaa...aaaaaa: File name too long

rh bz 1153996

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix df output for users with quota limits

commit 42bec214d8bd432be6d32a1acb0a9079ecd4d142 upstream.

The df for a SMB2 share triggers a GetInfo call for
FS_FULL_SIZE_INFORMATION. The values returned are used to populate
struct statfs.

The problem is that none of the information returned by the call
contains the total blocks available on the filesystem. Instead we use
the blocks available to the user ie. quota limitation when filling out
statfs.f_blocks. The information returned does contain Actual free units
on the filesystem and is used to populate statfs.f_bfree. For users with
quota enabled, it can lead to situations where the total free space
reported is more than the total blocks on the system ending up with df
reports like the following

 # df -h /mnt/a
Filesystem         Size  Used Avail Use% Mounted on
//192.168.22.10/a  2.5G -2.3G  2.5G    - /mnt/a

To fix this problem, we instead populate both statfs.f_bfree with the
same value as statfs.f_bavail ie. CallerAvailableAllocationUnits. This
is similar to what is done already in the code for cifs and df now
reports the quota information for the user used to mount the share.

 # df --si /mnt/a
Filesystem         Size  Used Avail Use% Mounted on
//192.168.22.10/a  2.7G  101M  2.6G   4% /mnt/a

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pierguido Lambri <plambri@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix freeing of filter in create_filter() when set_str is false

commit 8b0db1a5bdfcee0dbfa89607672598ae203c9045 upstream.

Performing the following task with kmemleak enabled:

 # cd /sys/kernel/tracing/events/irq/irq_handler_entry/
 # echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger
 # echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger
 # echo scan > /sys/kernel/debug/kmemleak
 # cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8800b9290308 (size 32):
  comm "bash", pid 1114, jiffies 4294848451 (age 141.139s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0
    [<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290
    [<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940
    [<ffffffff812639c9>] create_filter+0xa9/0x160
    [<ffffffff81263bdc>] create_event_filter+0xc/0x10
    [<ffffffff812655e5>] set_trigger_filter+0xe5/0x210
    [<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490
    [<ffffffff812652e2>] event_trigger_write+0x1a2/0x260
    [<ffffffff8138cf87>] __vfs_write+0xd7/0x380
    [<ffffffff8138f421>] vfs_write+0x101/0x260
    [<ffffffff8139187b>] SyS_write+0xab/0x130
    [<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe
    [<ffffffffffffffff>] 0xffffffffffffffff

The function create_filter() is passed a 'filterp' pointer that gets
allocated, and if "set_str" is true, it is up to the caller to free it, even
on error. The problem is that the pointer is not freed by create_filter()
when set_str is false. This is a bug, and it is not up to the caller to free
the filter on error if it doesn't care about the string.

Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com
Fixes: 38b78eb85 ("tracing: Factorize filter creation")
Reported-by: Chunyu Hu <chuhu@redhat.com>
Tested-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: rcar-du: Fix H/V sync signal polarity configuration

commit fd1adef3bff0663c5ac31b45bc4a05fafd43d19b upstream.

The VSL and HSL bits in the DSMR register set the corresponding
horizontal and vertical sync signal polarity to active high. The code
got it the wrong way around, fix it.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: rcar-du: Fix display timing controller parameter

commit 9cdced8a39c04cf798ddb2a27cb5952f7d39f633 upstream.

There is a bug in the setting of the DES (Display Enable Signal)
register. This current setting occurs 1 dot left shift. The DES
register should be set minus one value about the specifying value
with H/W specification. This patch corrects it.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: rcar-du: Fix crash in encoder failure error path

commit 05ee29e94acf0d4b3998c3f93374952de8f90176 upstream.

When an encoder fails to initialize the driver prints an error message
to the kernel log. The message contains the name of the encoder's DT
node, which is NULL for internal encoders. Use the of_node_full_name()
macro to avoid dereferencing a NULL pointer, print the output number to
add more context to the error, and make sure we still own a reference to
the encoder's DT node by delaying the of_node_put() call.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: rcar-du: lvds: Rename PLLEN bit to PLLON

commit 82e7c5e4964545352accff4b44bbcaa2c38e7fc1 upstream.

The bit is named PLLON in the datasheet, rename it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: rcar-du: lvds: Fix PLL frequency-related configuration

commit 5e1ac3bdc6bbb4f378251b87625b8acfbfc4ae82 upstream.

The frequency checks don't match the datasheet, fix them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/atomic: If the atomic check fails, return its value first

commit a0ffc51e20e90e0c1c2491de2b4b03f48b6caaba upstream.

The last part of drm_atomic_check_only is testing whether we need to
fail with -EINVAL when modeset is not allowed, but forgets to return
the value when atomic_check() fails first.

This results in -EDEADLK being replaced by -EINVAL, and the sanity
check in drm_modeset_drop_locks kicks in:

[  308.531734] ------------[ cut here ]------------
[  308.531791] WARNING: CPU: 0 PID: 1886 at drivers/gpu/drm/drm_modeset_lock.c:217 drm_modeset_drop_locks+0x33/0xc0 [drm]
[  308.531828] Modules linked in:
[  308.532050] CPU: 0 PID: 1886 Comm: kms_atomic Tainted: G     U  W 4.13.0-rc5-patser+ #5225
[  308.532082] Hardware name: NUC5i7RYB, BIOS RYBDWi35.86A.0246.2015.0309.1355 03/09/2015
[  308.532124] task: ffff8800cd9dae00 task.stack: ffff8800ca3b8000
[  308.532168] RIP: 0010:drm_modeset_drop_locks+0x33/0xc0 [drm]
[  308.532189] RSP: 0018:ffff8800ca3bf980 EFLAGS: 00010282
[  308.532211] RAX: dffffc0000000000 RBX: ffff8800ca3bfaf8 RCX: 0000000013a171e6
[  308.532235] RDX: 1ffff10019477f69 RSI: ffffffffa8ba4fa0 RDI: ffff8800ca3bfb48
[  308.532258] RBP: ffff8800ca3bf998 R08: 0000000000000000 R09: 0000000000000003
[  308.532281] R10: 0000000079dbe066 R11: 00000000f760b34b R12: 0000000000000001
[  308.532304] R13: dffffc0000000000 R14: 00000000ffffffea R15: ffff880096889680
[  308.532328] FS:  00007ff00959cec0(0000) GS:ffff8800d4e00000(0000) knlGS:0000000000000000
[  308.532359] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  308.532380] CR2: 0000000000000008 CR3: 00000000ca2e3000 CR4: 00000000003406f0
[  308.532402] Call Trace:
[  308.532440]  drm_mode_atomic_ioctl+0x19fa/0x1c00 [drm]
[  308.532488]  ? drm_atomic_set_property+0x1220/0x1220 [drm]
[  308.532565]  ? avc_has_extended_perms+0xc39/0xff0
[  308.532593]  ? lock_downgrade+0x610/0x610
[  308.532640]  ? drm_atomic_set_property+0x1220/0x1220 [drm]
[  308.532680]  drm_ioctl_kernel+0x154/0x1a0 [drm]
[  308.532755]  drm_ioctl+0x624/0x8f0 [drm]
[  308.532858]  ? drm_atomic_set_property+0x1220/0x1220 [drm]
[  308.532976]  ? drm_getunique+0x210/0x210 [drm]
[  308.533061]  do_vfs_ioctl+0xd92/0xe40
[  308.533121]  ? ioctl_preallocate+0x1b0/0x1b0
[  308.533160]  ? selinux_capable+0x20/0x20
[  308.533191]  ? do_fcntl+0x1b1/0xbf0
[  308.533219]  ? kasan_slab_free+0xa2/0xb0
[  308.533249]  ? f_getown+0x4b/0xa0
[  308.533278]  ? putname+0xcf/0xe0
[  308.533309]  ? security_file_ioctl+0x57/0x90
[  308.533342]  SyS_ioctl+0x4e/0x80
[  308.533374]  entry_SYSCALL_64_fastpath+0x18/0xad
[  308.533405] RIP: 0033:0x7ff00779e4d7
[  308.533431] RSP: 002b:00007fff66a043d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  308.533481] RAX: ffffffffffffffda RBX: 000000e7c7ca5910 RCX: 00007ff00779e4d7
[  308.533560] RDX: 00007fff66a04430 RSI: 00000000c03864bc RDI: 0000000000000003
[  308.533608] RBP: 00007ff007a5fb00 R08: 000000e7c7ca4620 R09: 000000e7c7ca5e60
[  308.533647] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000070
[  308.533685] R13: 0000000000000000 R14: 0000000000000000 R15: 000000e7c7ca5930
[  308.533770] Code: ff df 55 48 89 e5 41 55 41 54 53 48 89 fb 48 83 c7
50 48 89 fa 48 c1 ea 03 80 3c 02 00 74 05 e8 94 d4 16 e7 48 83 7b 50 00
74 02 <0f> ff 4c 8d 6b 58 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1
[  308.534086] ---[ end trace 77f11e53b1df44ad ]---

Solve this by adding the missing return.

This is also a bugfix because we could end up rejecting updates with
-EINVAL because of a early -EDEADLK, while if atomic_check ran to
completion it might have downgraded the modeset to a fastset.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: kms_atomic
Link: https://patchwork.freedesktop.org/patch/msgid/20170815095706.23624-1-maarten.lankhorst@linux.intel.com
Fixes: d34f20d6e2f2 ("drm: Atomic modeset ioctl")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Release driver tracking before making the object available again

commit fe4600a548f2763dec91b3b27a1245c370ceee2a upstream.

This is the same bug as we fixed in commit f6cd7daecff5 ("drm: Release
driver references to handle before making it available again"), but now
the exposure is via the PRIME lookup tables. If we remove the
object/handle from the PRIME lut, then a new request for the same
object/fd will generate a new handle, thus for a short window that
object is known to userspace by two different handles. Fix this by
releasing the driver tracking before PRIME.

Fixes: 0ff926c7d4f0 ("drm/prime: add exported buffers to current fprivs
imported buffer list (v2)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170819120558.6465-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: designware: Fix system suspend

commit a23318feeff662c8d25d21623daebdd2e55ec221 upstream.

The commit 8503ff166504 ("i2c: designware: Avoid unnecessary resuming
during system suspend"), may suggest to the PM core to try out the so
called direct_complete path for system sleep. In this path, the PM core
treats a runtime suspended device as it's already in a proper low power
state for system sleep, which makes it skip calling the system sleep
callbacks for the device, except for the ->prepare() and the ->complete()
callbacks.

However, the PM core may unset the direct_complete flag for a parent
device, in case its child device are being system suspended before. In this
scenario, the PM core invokes the system sleep callbacks, no matter if the
device is runtime suspended or not.

Particularly in cases of an existing i2c slave device, the above path is
triggered, which breaks the assumption that the i2c device is always
runtime resumed whenever the dw_i2c_plat_suspend() is being called.

More precisely, dw_i2c_plat_suspend() calls clk_core_disable() and
clk_core_unprepare(), for an already disabled/unprepared clock, leading to
a splat in the log about clocks calls being wrongly balanced and breaking
system sleep.

To still allow the direct_complete path in cases when it's possible, but
also to keep the fix simple, let's runtime resume the i2c device in the
->suspend() callback, before continuing to put the device into low power
state.

Note, in cases when the i2c device is attached to the ACPI PM domain, this
problem doesn't occur, because ACPI's ->suspend() callback, assigned to
acpi_subsys_suspend(), already calls pm_runtime_resume() for the device.

It should also be noted that this change does not fix commit 8503ff166504
("i2c: designware: Avoid unnecessary resuming during system suspend").
Because for the non-ACPI case, the system sleep support was already broken
prior that point.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses

commit 7d79cee2c6540ea64dd917a14e2fd63d4ac3d3c0 upstream.

It is necessary to explicitly set both SLC_AUX_RGN_START1 and SLC_AUX_RGN_END1
which hold MSB bits of the physical address correspondingly of region start
and end otherwise SLC region operation is executed in unpredictable manner

Without this patch, SLC flushes on HSDK (IOC disabled) were taking
seconds.

Reported-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: PAR40 regs only written if PAE40 exist]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add stereo mic quirk for Lenovo G50-70 (17aa:3978)

commit bbba6f9d3da357bbabc6fda81e99ff5584500e76 upstream.

Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the
similar workaround for the inverted stereo dmic like other Lenovo
models.

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: core: Fix unexpected error at replacing user TLV

commit 88c54cdf61f508ebcf8da2d819f5dfc03e954d1d upstream.

When user tries to replace the user-defined control TLV, the kernel
checks the change of its content via memcmp().  The problem is that
the kernel passes the return value from memcmp() as is.  memcmp()
gives a non-zero negative value depending on the comparison result,
and this shall be recognized as an error code.

The patch covers that corner-case, return 1 properly for the changed
TLV.

Fixes: 8aa9b586e420 ("[ALSA] Control API - more robust TLV implementation")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310

commit 1d2226e45040ed4aee95b633cbd64702bf7fc2a1 upstream.

Add ELAN0602 to the list of known ACPI IDs to enable support for ELAN
touchpads found in Lenovo Yoga310.

Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: trackpoint - add new trackpoint firmware ID

commit ec667683c532c93fb41e100e5d61a518971060e2 upstream.

Synaptics add new TP firmware ID: 0x2 and 0x3, for now both lower 2 bits
are indicated as TP. Change the constant to bitwise values.

This makes trackpoint to be recognized on Lenovo Carbon X1 Gen5 instead
of it being identified as "PS/2 Generic Mouse".

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add lewisburg device ids

commit 9ff2007bea1f1bfc53ac0bc7ccf8200bb275fd52 upstream.

Add MEI Lewisburg PCH IDs for Purley based workstations.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add broxton pci device ids

commit dd16f6cdeb4e02a728863d3cf99aaab352f0d761 upstream.

Add device ids for Broxton SoC based devices.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: fix order of queue length updates in qdisc_replace()

[ Upstream commit 68a66d149a8c78ec6720f268597302883e48e9fa ]

This important to call qdisc_tree_reduce_backlog() after changing queue
length. Parent qdisc should deactivate class in ->qlen_notify() called from
qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero.

Missed class deactivations leads to crashes/warnings at picking packets
from empty qdisc and corrupting state at reactivating this class in future.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 86a7996cc8a0 ("net_sched: introduce qdisc_replace() helper")
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: fix NULL pointer dereference when action calls some targets

[ Upstream commit 4f8a881acc9d1adaf1e552349a0b1df28933a04c ]

As we know in some target's checkentry it may dereference par.entryinfo
to check entry stuff inside. But when sched action calls xt_check_target,
par.entryinfo is set with NULL. It would cause kernel panic when calling
some targets.

It can be reproduce with:
  # tc qd add dev eth1 ingress handle ffff:
  # tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \
    -j ECN --ecn-tcp-remove

It could also crash kernel when using target CLUSTERIP or TPROXY.

By now there's no proper value for par.entryinfo in ipt_init_target,
but it can not be set with NULL. This patch is to void all these
panics by setting it with an ipt_entry obj with all members = 0.

Note that this issue has been there since the very beginning.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irda: do not leak initialized list.dev to userspace

[ Upstream commit b024d949a3c24255a7ef1a470420eb478949aa4c ]

list.dev has not been initialized and so the copy_to_user is copying
data from the stack back to user space which is a potential
information leak. Fix this ensuring all of list is initialized to
zero.

Detected by CoverityScan, CID#1357894 ("Uninitialized scalar variable")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP

[ Upstream commit cdbeb633ca71a02b7b63bfeb94994bf4e1a0b894 ]

In some situations tcp_send_loss_probe() can realize that it's unable
to send a loss probe (TLP), and falls back to calling tcp_rearm_rto()
to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto()
realizes that the RTO was eligible to fire immediately or at some
point in the past (delta_us <= 0). Previously in such cases
tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now +
icsk_rto, which caused needless delays of hundreds of milliseconds
(and non-linear behavior that made reproducible testing
difficult). This commit changes the logic to schedule "overdue" RTOs
ASAP, rather than at now + icsk_rto.

Fixes: 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)")
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: repair fib6 tree in failure case

[ Upstream commit 348a4002729ccab8b888b38cbc099efa2f2a2036 ]

In fib6_add(), it is possible that fib6_add_1() picks an intermediate
node and sets the node's fn->leaf to NULL in order to add this new
route. However, if fib6_add_rt2node() fails to add the new
route for some reason, fn->leaf will be left as NULL and could
potentially cause crash when fn->leaf is accessed in fib6_locate().
This patch makes sure fib6_repair_tree() is called to properly repair
fn->leaf in the above failure case.

Here is the syzkaller reported general protection fault in fib6_locate:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000
RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline]
RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline]
RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline]
RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233
RSP: 0018:ffff8801d01a36a8  EFLAGS: 00010202
RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000
RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100
RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001
R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000
FS:  00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
 ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0
 ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0
 ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988
Call Trace:
 [<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109
 [<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075
 [<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450
 [<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281
 [<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456
 [<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline]
 [<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232
 [<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778
 [<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline]
 [<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619
 [<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834
 [<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478
 [<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491
 [<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538
 [<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline]
 [<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577
 [<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17

Note: there is no "Fixes" tag as this seems to be a bug introduced
very early.

Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: reset fn->rr_ptr when replacing route

[ Upstream commit 383143f31d7d3525a1dbff733d52fff917f82f15 ]

syzcaller reported the following use-after-free issue in rt6_select():
BUG: KASAN: use-after-free in rt6_select net/ipv6/route.c:755 [inline] at addr ffff8800bc6994e8
BUG: KASAN: use-after-free in ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 at addr ffff8800bc6994e8
Read of size 4 by task syz-executor1/439628
CPU: 0 PID: 439628 Comm: syz-executor1 Not tainted 4.3.5+ #8
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
 0000000000000000 ffff88018fe435b0 ffffffff81ca384d ffff8801d3588c00
 ffff8800bc699380 ffff8800bc699500 dffffc0000000000 ffff8801d40a47c0
 ffff88018fe435d8 ffffffff81735751 ffff88018fe43660 ffff8800bc699380
Call Trace:
 [<ffffffff81ca384d>] __dump_stack lib/dump_stack.c:15 [inline]
 [<ffffffff81ca384d>] dump_stack+0xc1/0x124 lib/dump_stack.c:51
sctp: [Deprecated]: syz-executor0 (pid 439615) Use of struct sctp_assoc_value in delayed_ack socket option.
Use struct sctp_sack_info instead
 [<ffffffff81735751>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158
 [<ffffffff817359c4>] print_address_description mm/kasan/report.c:196 [inline]
 [<ffffffff817359c4>] kasan_report_error+0x1b4/0x4a0 mm/kasan/report.c:285
 [<ffffffff81735d93>] kasan_report mm/kasan/report.c:305 [inline]
 [<ffffffff81735d93>] __asan_report_load4_noabort+0x43/0x50 mm/kasan/report.c:325
 [<ffffffff82a28e39>] rt6_select net/ipv6/route.c:755 [inline]
 [<ffffffff82a28e39>] ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084
 [<ffffffff82a28fb1>] ip6_pol_route_output+0x81/0xb0 net/ipv6/route.c:1203
 [<ffffffff82ab0a50>] fib6_rule_action+0x1f0/0x680 net/ipv6/fib6_rules.c:95
 [<ffffffff8265cbb6>] fib_rules_lookup+0x2a6/0x7a0 net/core/fib_rules.c:223
 [<ffffffff82ab1430>] fib6_rule_lookup+0xd0/0x250 net/ipv6/fib6_rules.c:41
 [<ffffffff82a22006>] ip6_route_output+0x1d6/0x2c0 net/ipv6/route.c:1224
 [<ffffffff829e83d2>] ip6_dst_lookup_tail+0x4d2/0x890 net/ipv6/ip6_output.c:943
 [<ffffffff829e889a>] ip6_dst_lookup_flow+0x9a/0x250 net/ipv6/ip6_output.c:1079
 [<ffffffff82a9f7d8>] ip6_datagram_dst_update+0x538/0xd40 net/ipv6/datagram.c:91
 [<ffffffff82aa0978>] __ip6_datagram_connect net/ipv6/datagram.c:251 [inline]
 [<ffffffff82aa0978>] ip6_datagram_connect+0x518/0xe50 net/ipv6/datagram.c:272
 [<ffffffff82aa1313>] ip6_datagram_connect_v6_only+0x63/0x90 net/ipv6/datagram.c:284
 [<ffffffff8292f790>] inet_dgram_connect+0x170/0x1f0 net/ipv4/af_inet.c:564
 [<ffffffff82565547>] SYSC_connect+0x1a7/0x2f0 net/socket.c:1582
 [<ffffffff8256a649>] SyS_connect+0x29/0x30 net/socket.c:1563
 [<ffffffff82c72032>] entry_SYSCALL_64_fastpath+0x12/0x17
Object at ffff8800bc699380, in cache ip6_dst_cache size: 384

The root cause of it is that in fib6_add_rt2node(), when it replaces an
existing route with the new one, it does not update fn->rr_ptr.
This commit resets fn->rr_ptr to NULL when it points to a route which is
replaced in fib6_add_rt2node().

Fixes: 27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix use-after-free

[ Upstream commit 5bfd37b4de5c98e86b12bd13be5aa46c7484a125 ]

syszkaller reported use-after-free in tipc [1]

When msg->rep skb is freed, set the pointer to NULL,
so that caller does not free it again.

[1]

==================================================================
BUG: KASAN: use-after-free in skb_push+0xd4/0xe0 net/core/skbuff.c:1466
Read of size 8 at addr ffff8801c6e71e90 by task syz-executor5/4115

CPU: 1 PID: 4115 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:52
 print_address_description+0x73/0x250 mm/kasan/report.c:252
 kasan_report_error mm/kasan/report.c:351 [inline]
 kasan_report+0x24e/0x340 mm/kasan/report.c:409
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430
 skb_push+0xd4/0xe0 net/core/skbuff.c:1466
 tipc_nl_compat_recv+0x833/0x18f0 net/tipc/netlink_compat.c:1209
 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
 netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 sock_write_iter+0x31a/0x5d0 net/socket.c:898
 call_write_iter include/linux/fs.h:1743 [inline]
 new_sync_write fs/read_write.c:457 [inline]
 __vfs_write+0x684/0x970 fs/read_write.c:470
 vfs_write+0x189/0x510 fs/read_write.c:518
 SYSC_write fs/read_write.c:565 [inline]
 SyS_write+0xef/0x220 fs/read_write.c:557
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4512e9
RSP: 002b:00007f3bc8184c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004512e9
RDX: 0000000000000020 RSI: 0000000020fdb000 RDI: 0000000000000006
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b5e76
R13: 00007f3bc8184b48 R14: 00000000004b5e86 R15: 0000000000000000

Allocated by task 4115:
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489
 kmem_cache_alloc_node+0x13d/0x750 mm/slab.c:3651
 __alloc_skb+0xf1/0x740 net/core/skbuff.c:219
 alloc_skb include/linux/skbuff.h:903 [inline]
 tipc_tlv_alloc+0x26/0xb0 net/tipc/netlink_compat.c:148
 tipc_nl_compat_dumpit+0xf2/0x3c0 net/tipc/netlink_compat.c:248
 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline]
 tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199
 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
 netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 sock_write_iter+0x31a/0x5d0 net/socket.c:898
 call_write_iter include/linux/fs.h:1743 [inline]
 new_sync_write fs/read_write.c:457 [inline]
 __vfs_write+0x684/0x970 fs/read_write.c:470
 vfs_write+0x189/0x510 fs/read_write.c:518
 SYSC_write fs/read_write.c:565 [inline]
 SyS_write+0xef/0x220 fs/read_write.c:557
 entry_SYSCALL_64_fastpath+0x1f/0xbe

Freed by task 4115:
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459 [inline]
 kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
 __cache_free mm/slab.c:3503 [inline]
 kmem_cache_free+0x77/0x280 mm/slab.c:3763
 kfree_skbmem+0x1a1/0x1d0 net/core/skbuff.c:622
 __kfree_skb net/core/skbuff.c:682 [inline]
 kfree_skb+0x165/0x4c0 net/core/skbuff.c:699
 tipc_nl_compat_dumpit+0x36a/0x3c0 net/tipc/netlink_compat.c:260
 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline]
 tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199
 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
 netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 sock_write_iter+0x31a/0x5d0 net/socket.c:898
 call_write_iter include/linux/fs.h:1743 [inline]
 new_sync_write fs/read_write.c:457 [inline]
 __vfs_write+0x684/0x970 fs/read_write.c:470
 vfs_write+0x189/0x510 fs/read_write.c:518
 SYSC_write fs/read_write.c:565 [inline]
 SyS_write+0xef/0x220 fs/read_write.c:557
 entry_SYSCALL_64_fastpath+0x1f/0xbe

The buggy address belongs to the object at ffff8801c6e71dc0
 which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 208 bytes inside of
 224-byte region [ffff8801c6e71dc0, ffff8801c6e71ea0)
The buggy address belongs to the page:
page:ffffea00071b9c40 count:1 mapcount:0 mapping:ffff8801c6e71000 index:0x0
flags: 0x200000000000100(slab)
raw: 0200000000000100 ffff8801c6e71000 0000000000000000 000000010000000c
raw: ffffea0007224a20 ffff8801d98caf48 ffff8801d9e79040 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801c6e71d80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
 ffff8801c6e71e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801c6e71e80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
                         ^
 ffff8801c6e71f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8801c6e71f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: fully initialize the IPv6 address in sctp_v6_to_addr()

[ Upstream commit 15339e441ec46fbc3bf3486bb1ae4845b0f1bb8d ]

KMSAN reported use of uninitialized sctp_addr->v4.sin_addr.s_addr and
sctp_addr->v6.sin6_scope_id in sctp_v6_cmp_addr() (see below).
Make sure all fields of an IPv6 address are initialized, which
guarantees that the IPv4 fields are also initialized.

==================================================================
 BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0
 net/sctp/ipv6.c:517
 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
 01/01/2011
 Call Trace:
  dump_stack+0x172/0x1c0 lib/dump_stack.c:42
  is_logbuf_locked mm/kmsan/kmsan.c:59 [inline]
  kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938
  native_save_fl arch/x86/include/asm/irqflags.h:18 [inline]
  arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline]
  arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline]
  __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467
  sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517
  sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290
  sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
  sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651
  sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871
  inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
  sock_sendmsg_nosec net/socket.c:633 [inline]
  sock_sendmsg net/socket.c:643 [inline]
  SYSC_sendto+0x608/0x710 net/socket.c:1696
  SyS_sendto+0x8a/0xb0 net/socket.c:1664
  entry_SYSCALL_64_fastpath+0x13/0x94
 RIP: 0033:0x44b479
 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479
 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006
 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c
 R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff
 R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000
 origin description: ----dst_saddr@sctp_v6_get_dst
 local variable created at:
  sk_fullsock include/net/sock.h:2321 [inline]
  inet6_sk include/linux/ipv6.h:309 [inline]
  sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241
  sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
==================================================================
 BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0
 net/sctp/ipv6.c:517
 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
 01/01/2011
 Call Trace:
  dump_stack+0x172/0x1c0 lib/dump_stack.c:42
  is_logbuf_locked mm/kmsan/kmsan.c:59 [inline]
  kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938
  native_save_fl arch/x86/include/asm/irqflags.h:18 [inline]
  arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline]
  arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline]
  __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467
  sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517
  sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290
  sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
  sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651
  sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871
  inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
  sock_sendmsg_nosec net/socket.c:633 [inline]
  sock_sendmsg net/socket.c:643 [inline]
  SYSC_sendto+0x608/0x710 net/socket.c:1696
  SyS_sendto+0x8a/0xb0 net/socket.c:1664
  entry_SYSCALL_64_fastpath+0x13/0x94
 RIP: 0033:0x44b479
 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479
 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006
 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c
 R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff
 R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000
 origin description: ----dst_saddr@sctp_v6_get_dst
 local variable created at:
  sk_fullsock include/net/sock.h:2321 [inline]
  inet6_sk include/linux/ipv6.h:309 [inline]
  sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241
  sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
==================================================================

Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: better IP_MAX_MTU enforcement

[ Upstream commit c780a049f9bf442314335372c9abc4548bfe3e44 ]

While working on yet another syzkaller report, I found
that our IP_MAX_MTU enforcements were not properly done.

gcc seems to reload dev->mtu for min(dev->mtu, IP_MAX_MTU), and
final result can be bigger than IP_MAX_MTU :/

This is a problem because device mtu can be changed on other cpus or
threads.

While this patch does not fix the issue I am working on, it is
probably worth addressing it.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched/sfq: update hierarchical backlog when drop packet

[ Upstream commit 325d5dc3f7e7c2840b65e4a2988c082c2c0025c5 ]

When sfq_enqueue() drops head packet or packet from another queue it
have to update backlog at upper qdiscs too.

Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: fix NULL dereference in free_fib_info_rcu()

[ Upstream commit 187e5b3ac84d3421d2de3aca949b2791fbcad554 ]

If fi->fib_metrics could not be allocated in fib_create_info()
we attempt to dereference a NULL pointer in free_fib_info_rcu() :

    m = fi->fib_metrics;
    if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt))
            kfree(m);

Before my recent patch, we used to call kfree(NULL) and nothing wrong
happened.

Instead of using RCU to defer freeing while we are under memory stress,
it seems better to take immediate action.

This was reported by syzkaller team.

Fixes: 3fb07daff8e9 ("ipv4: add reference counting to metrics")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: defer ccid_hc_tx_delete() at dismantle time

[ Upstream commit 120e9dabaf551c6dc03d3a10a1f026376cb1811c ]

syszkaller team reported another problem in DCCP [1]

Problem here is that the structure holding RTO timer
(ccid2_hc_tx_rto_expire() handler) is freed too soon.

We can not use del_timer_sync() to cancel the timer
since this timer wants to grab socket lock (that would risk a dead lock)

Solution is to defer the freeing of memory when all references to
the socket were released. Socket timers do own a reference, so this
should fix the issue.

[1]

==================================================================
BUG: KASAN: use-after-free in ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144
Read of size 4 at addr ffff8801d2660540 by task kworker/u4:7/3365

CPU: 1 PID: 3365 Comm: kworker/u4:7 Not tainted 4.13.0-rc4+ #3
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events_unbound call_usermodehelper_exec_work
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:52
 print_address_description+0x73/0x250 mm/kasan/report.c:252
 kasan_report_error mm/kasan/report.c:351 [inline]
 kasan_report+0x24e/0x340 mm/kasan/report.c:409
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429
 ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144
 call_timer_fn+0x233/0x830 kernel/time/timer.c:1268
 expire_timers kernel/time/timer.c:1307 [inline]
 __run_timers+0x7fd/0xb90 kernel/time/timer.c:1601
 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284
 invoke_softirq kernel/softirq.c:364 [inline]
 irq_exit+0x1cc/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:638 [inline]
 smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:1044
 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:702
RIP: 0010:arch_local_irq_enable arch/x86/include/asm/paravirt.h:824 [inline]
RIP: 0010:__raw_write_unlock_irq include/linux/rwlock_api_smp.h:267 [inline]
RIP: 0010:_raw_write_unlock_irq+0x56/0x70 kernel/locking/spinlock.c:343
RSP: 0018:ffff8801cd50eaa8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff10
RAX: dffffc0000000000 RBX: ffffffff85a090c0 RCX: 0000000000000006
RDX: 1ffffffff0b595f3 RSI: 1ffff1003962f989 RDI: ffffffff85acaf98
RBP: ffff8801cd50eab0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801cc96ea60
R13: dffffc0000000000 R14: ffff8801cc96e4c0 R15: ffff8801cc96e4c0
 </IRQ>
 release_task+0xe9e/0x1a40 kernel/exit.c:220
 wait_task_zombie kernel/exit.c:1162 [inline]
 wait_consider_task+0x29b8/0x33c0 kernel/exit.c:1389
 do_wait_thread kernel/exit.c:1452 [inline]
 do_wait+0x441/0xa90 kernel/exit.c:1523
 kernel_wait4+0x1f5/0x370 kernel/exit.c:1665
 SYSC_wait4+0x134/0x140 kernel/exit.c:1677
 SyS_wait4+0x2c/0x40 kernel/exit.c:1673
 call_usermodehelper_exec_sync kernel/kmod.c:286 [inline]
 call_usermodehelper_exec_work+0x1a0/0x2c0 kernel/kmod.c:323
 process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2097
 worker_thread+0x223/0x1860 kernel/workqueue.c:2231
 kthread+0x35e/0x430 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:425

Allocated by task 21267:
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489
 kmem_cache_alloc+0x127/0x750 mm/slab.c:3561
 ccid_new+0x20e/0x390 net/dccp/ccid.c:151
 dccp_hdlr_ccid+0x27/0x140 net/dccp/feat.c:44
 __dccp_feat_activate+0x142/0x2a0 net/dccp/feat.c:344
 dccp_feat_activate_values+0x34e/0xa90 net/dccp/feat.c:1538
 dccp_rcv_request_sent_state_process net/dccp/input.c:472 [inline]
 dccp_rcv_state_process+0xed1/0x1620 net/dccp/input.c:677
 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679
 sk_backlog_rcv include/net/sock.h:911 [inline]
 __release_sock+0x124/0x360 net/core/sock.c:2269
 release_sock+0xa4/0x2a0 net/core/sock.c:2784
 inet_wait_for_connect net/ipv4/af_inet.c:557 [inline]
 __inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643
 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682
 SYSC_connect+0x204/0x470 net/socket.c:1642
 SyS_connect+0x24/0x30 net/socket.c:1623
 entry_SYSCALL_64_fastpath+0x1f/0xbe

Freed by task 3049:
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459 [inline]
 kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
 __cache_free mm/slab.c:3503 [inline]
 kmem_cache_free+0x77/0x280 mm/slab.c:3763
 ccid_hc_tx_delete+0xc5/0x100 net/dccp/ccid.c:190
 dccp_destroy_sock+0x1d1/0x2b0 net/dccp/proto.c:225
 inet_csk_destroy_sock+0x166/0x3f0 net/ipv4/inet_connection_sock.c:833
 dccp_done+0xb7/0xd0 net/dccp/proto.c:145
 dccp_time_wait+0x13d/0x300 net/dccp/minisocks.c:72
 dccp_rcv_reset+0x1d1/0x5b0 net/dccp/input.c:160
 dccp_rcv_state_process+0x8fc/0x1620 net/dccp/input.c:663
 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679
 sk_backlog_rcv include/net/sock.h:911 [inline]
 __sk_receive_skb+0x33e/0xc00 net/core/sock.c:521
 dccp_v4_rcv+0xef1/0x1c00 net/dccp/ipv4.c:871
 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216
 NF_HOOK include/linux/netfilter.h:248 [inline]
 ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257
 dst_input include/net/dst.h:477 [inline]
 ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397
 NF_HOOK include/linux/netfilter.h:248 [inline]
 ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488
 __netif_receive_skb_core+0x19af/0x33d0 net/core/dev.c:4417
 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4455
 process_backlog+0x203/0x740 net/core/dev.c:5130
 napi_poll net/core/dev.c:5527 [inline]
 net_rx_action+0x792/0x1910 net/core/dev.c:5593
 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284

The buggy address belongs to the object at ffff8801d2660100
 which belongs to the cache ccid2_hc_tx_sock of size 1240
The buggy address is located 1088 bytes inside of
 1240-byte region [ffff8801d2660100, ffff8801d26605d8)
The buggy address belongs to the page:
page:ffffea0007499800 count:1 mapcount:0 mapping:ffff8801d2660100 index:0x0 compound_mapcount: 0
flags: 0x200000000008100(slab|head)
raw: 0200000000008100 ffff8801d2660100 0000000000000000 0000000100000005
raw: ffffea00075271a0 ffffea0007538820 ffff8801d3aef9c0 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801d2660400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8801d2660480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801d2660500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                           ^
 ffff8801d2660580: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
 ffff8801d2660600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: purge write queue in dccp_destroy_sock()

[ Upstream commit 7749d4ff88d31b0be17c8683143135adaaadc6a7 ]

syzkaller reported that DCCP could have a non empty
write queue at dismantle time.

WARNING: CPU: 1 PID: 2953 at net/core/stream.c:199 sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 2953 Comm: syz-executor0 Not tainted 4.13.0-rc4+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:52
 panic+0x1e4/0x417 kernel/panic.c:180
 __warn+0x1c4/0x1d9 kernel/panic.c:541
 report_bug+0x211/0x2d0 lib/bug.c:183
 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190
 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline]
 do_trap+0x260/0x390 arch/x86/kernel/traps.c:273
 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310
 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323
 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846
RIP: 0010:sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199
RSP: 0018:ffff8801d182f108 EFLAGS: 00010297
RAX: ffff8801d1144140 RBX: ffff8801d13cb280 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff85137b00 RDI: ffff8801d13cb280
RBP: ffff8801d182f148 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d13cb4d0
R13: ffff8801d13cb3b8 R14: ffff8801d13cb300 R15: ffff8801d13cb3b8
 inet_csk_destroy_sock+0x175/0x3f0 net/ipv4/inet_connection_sock.c:835
 dccp_close+0x84d/0xc10 net/dccp/proto.c:1067
 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
 sock_release+0x8d/0x1e0 net/socket.c:597
 sock_close+0x16/0x20 net/socket.c:1126
 __fput+0x327/0x7e0 fs/file_table.c:210
 ____fput+0x15/0x20 fs/file_table.c:246
 task_work_run+0x18a/0x260 kernel/task_work.c:116
 exit_task_work include/linux/task_work.h:21 [inline]
 do_exit+0xa32/0x1b10 kernel/exit.c:865
 do_group_exit+0x149/0x400 kernel/exit.c:969
 get_signal+0x7e8/0x17e0 kernel/signal.c:2330
 do_signal+0x94/0x1ee0 arch/x86/kernel/signal.c:808
 exit_to_usermode_loop+0x21c/0x2d0 arch/x86/entry/common.c:157
 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
 syscall_return_slowpath+0x3a7/0x450 arch/x86/entry/common.c:263

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af_key: do not use GFP_KERNEL in atomic contexts

[ Upstream commit 36f41f8fc6d8aa9f8c9072d66ff7cf9055f5e69b ]

pfkey_broadcast() might be called from non process contexts,
we can not use GFP_KERNEL in these cases [1].

This patch partially reverts commit ba51b6be38c1 ("net: Fix RCU splat in
af_key"), only keeping the GFP_ATOMIC forcing under rcu_read_lock()
section.

[1] : syzkaller reported :

in_atomic(): 1, irqs_disabled(): 0, pid: 2932, name: syzkaller183439
3 locks held by syzkaller183439/2932:
 #0:  (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff83b43888>] pfkey_sendmsg+0x4c8/0x9f0 net/key/af_key.c:3649
 #1:  (&pfk->dump_lock){+.+.+.}, at: [<ffffffff83b467f6>] pfkey_do_dump+0x76/0x3f0 net/key/af_key.c:293
 #2:  (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] spin_lock_bh include/linux/spinlock.h:304 [inline]
 #2:  (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] xfrm_policy_walk+0x192/0xa30 net/xfrm/xfrm_policy.c:1028
CPU: 0 PID: 2932 Comm: syzkaller183439 Not tainted 4.13.0-rc4+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:52
 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:5994
 __might_sleep+0x95/0x190 kernel/sched/core.c:5947
 slab_pre_alloc_hook mm/slab.h:416 [inline]
 slab_alloc mm/slab.c:3383 [inline]
 kmem_cache_alloc+0x24b/0x6e0 mm/slab.c:3559
 skb_clone+0x1a0/0x400 net/core/skbuff.c:1037
 pfkey_broadcast_one+0x4b2/0x6f0 net/key/af_key.c:207
 pfkey_broadcast+0x4ba/0x770 net/key/af_key.c:281
 dump_sp+0x3d6/0x500 net/key/af_key.c:2685
 xfrm_policy_walk+0x2f1/0xa30 net/xfrm/xfrm_policy.c:1042
 pfkey_dump_sp+0x42/0x50 net/key/af_key.c:2695
 pfkey_do_dump+0xaa/0x3f0 net/key/af_key.c:299
 pfkey_spddump+0x1a0/0x210 net/key/af_key.c:2722
 pfkey_process+0x606/0x710 net/key/af_key.c:2814
 pfkey_sendmsg+0x4d6/0x9f0 net/key/af_key.c:3650
sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 ___sys_sendmsg+0x755/0x890 net/socket.c:2035
 __sys_sendmsg+0xe5/0x210 net/socket.c:2069
 SYSC_sendmsg net/socket.c:2080 [inline]
 SyS_sendmsg+0x2d/0x50 net/socket.c:2076
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x445d79
RSP: 002b:00007f32447c1dc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000445d79
RDX: 0000000000000000 RSI: 000000002023dfc8 RDI: 0000000000000008
RBP: 0000000000000086 R08: 00007f32447c2700 R09: 00007f32447c2700
R10: 00007f32447c2700 R11: 0000000000000202 R12: 0000000000000000
R13: 00007ffe33edec4f R14: 00007f32447c29c0 R15: 0000000000000000

Fixes: ba51b6be38c1 ("net: Fix RCU splat in af_key")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 4.4.84 into android-4.4

Changes in 4.4.84
netfilter: nf_ct_ext: fix possible panic after nf_ct_extend_unregister
audit: Fix use after free in audit_remove_watch_rule()
parisc: pci memory bar assignment fails with 64bit kernels on dino/cujo
crypto: x86/sha1 - Fix reads beyond the number of blocks passed
Input: elan_i2c - add ELAN0608 to the ACPI table
Input: elan_i2c - Add antoher Lenovo ACPI ID for upcoming Lenovo NB
ALSA: seq: 2nd attempt at fixing race creating a queue
ALSA: usb-audio: Apply sample rate quirk to Sennheiser headset
ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices
mm/mempolicy: fix use after free when calling get_mempolicy
mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes
xen: fix bio vec merging
x86/asm/64: Clear AC on NMI entries
irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()
irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup()
Sanitize 'move_pages()' permission checks
pids: make task_tgid_nr_ns() safe
perf/x86: Fix LBR related crashes on Intel Atom
usb: optimize acpi companion search for usb port devices
usb: qmi_wwan: add D-Link DWM-222 device ID
Linux 4.4.84

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

ANDROID: NFC: st21nfca: Fix memory OOB and leak issues in connectivity events handler

Overflow on memcpy is possible in kernel driver for st21nfca's
NFC HCI layer when handling connectivity events if aid_len or
params_len are bigger than the buffer size.
Memory leak is possible when parameter tag is invalid.

Bug: 62679581

Signed-off-by: Suren Baghdasaryan <surenb@google.com>

Linux 4.4.84

usb: qmi_wwan: add D-Link DWM-222 device ID

commit bed9ff165960921303a100228585f2d1691b42eb upstream.

Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: optimize acpi companion search for usb port devices

commit ed18c5fa945768a9bec994e786edbbbc7695acf6 upstream.

This optimization significantly reduces xhci driver load time.

In ACPI tables the acpi companion port devices are children of
the hub device. The port devices are identified by their port number
returned by the ACPI _ADR method.
_ADR 0 is reserved for the root hub device.

The current implementation to find a acpi companion port device
loops through all acpi port devices under that parent hub, evaluating
their _ADR method each time a new port device is added.

for a xHC controller with 25 ports under its roothub it
will end up invoking ACPI bytecode 625 times before all ports
are ready, making it really slow.

The _ADR values are already read and cached earler. So instead of
running the bytecode again we can check the cached _ADR value first,
and then fall back to the old way.

As one of the more significant changes, the xhci load time on
Intel kabylake reduced by 70%, (28ms) from
initcall xhci_pci_init+0x0/0x49 returned 0 after 39537 usecs
to
initcall xhci_pci_init+0x0/0x49 returned 0 after 11270 usecs

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86: Fix LBR related crashes on Intel Atom

commit 6fc2e83077b05a061afe9b24f2fdff7a0434eb67 upstream.

This patches fixes the LBR kernel crashes on Intel Atom.

The kernel was assuming that if the CPU supports 64-bit format
LBR, then it has an LBR_SELECT MSR. Atom uses 64-bit LBR format
but does not have LBR_SELECT. That was causing NULL pointer
dereferences in a couple of places.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Fixes: 96f3eda67fcf ("perf/x86/intel: Fix static checker warning in lbr enable")
Link: http://lkml.kernel.org/r/1449182000-31524-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Denys Zagorui <dzagorui@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pids: make task_tgid_nr_ns() safe

commit dd1c1f2f2028a7b851f701fc6a8ebe39dcb95e7c upstream.

This was reported many times, and this was even mentioned in commit
52ee2dfdd4f5 ("pids: refactor vnr/nr_ns helpers to make them safe") but
somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is
not safe because task->group_leader points to nowhere after the exiting
task passes exit_notify(), rcu_read_lock() can not help.

We really need to change __unhash_process() to nullify group_leader,
parent, and real_parent, but this needs some cleanups.  Until then we
can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and
fix the problem.

Reported-by: Troy Kensinger <tkensinger@google.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sanitize 'move_pages()' permission checks

commit 197e7e521384a23b9e585178f3f11c9fa08274b9 upstream.

The 'move_paghes()' system call was introduced long long ago with the
same permission checks as for sending a signal (except using
CAP_SYS_NICE instead of CAP_SYS_KILL for the overriding capability).

That turns out to not be a great choice - while the system call really
only moves physical page allocations around (and you need other
capabilities to do a lot of it), you can check the return value to map
out some the virtual address choices and defeat ASLR of a binary that
still shares your uid.

So change the access checks to the more common 'ptrace_may_access()'
model instead.

This tightens the access checks for the uid, and also effectively
changes the CAP_SYS_NICE check to CAP_SYS_PTRACE, but it's unlikely that
anybody really _uses_ this legacy system call any more (we hav ebetter
NUMA placement models these days), so I expect nobody to notice.

Famous last words.

Reported-by: Otto Ebeling <otto.ebeling@iki.fi>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>