OSDN Git Service
Junio C Hamano [Sun, 30 Dec 2007 20:51:42 +0000 (12:51 -0800)]
git-rebase -i: clean-up error check codepath.
After replaying a single change, the code performed a number of checks,
but some of them were for sanity checking, failures from which should
make the command abort, and others were checks to see if it should make
a new commit object. Stringing them together with "&&" was wrong.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 30 Dec 2007 20:37:59 +0000 (12:37 -0800)]
git-rebase -i behaves better on commits with incomplete messages
The commit message template when squashing multiple commits is
prepared by concatenating the messages of existing commits
together. If the messages from some of them end with incomplete
lines, this would result in a suboptimal message template. Make
sure that we add a terminating LF after each commit message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Grégoire Barbier [Sun, 30 Dec 2007 17:15:51 +0000 (18:15 +0100)]
Fix double-free() in http-push.c:remote_exists()
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 28 Dec 2007 21:58:43 +0000 (13:58 -0800)]
"git pull --tags": error out with a better message.
When "git pull --tags" is run without any other arguments, the
standard error message "You told me to fetch and merge stuff but
there is nothing to merge! You might want to fix your config"
is given.
While the error may be technically correct, fixing the config
would not help, as "git pull --tags" itself tells "git fetch"
not to use the configured refspecs.
This commit makes "git pull --tags" to issue a different error
message to avoid confusion. This is merely an interim solution.
In the longer term, it would be a better approach to change the
semantics of --tags option to make "git fetch" and "git pull"
to:
(1) behave as if no --tags was given (so an explicit refspec on
the command line overrides configured ones, or no explicit
refspecs on the command line takes configured ones); but
(2) no auto-following of tags is made even when using
configured refspecs; and
(3) fetch all tags as not-for-merge entries".
Then we would not need to have this separate error message, as
the ordinary merge will happen even with the --tags option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Fri, 28 Dec 2007 22:25:39 +0000 (23:25 +0100)]
git-sh-setup: document git_editor() and get_author_ident_from_commit()
These 2 functions were missing from the manpage.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 28 Dec 2007 07:29:53 +0000 (23:29 -0800)]
Documentation/git-submodule.txt: typofix
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Dec 2007 02:16:52 +0000 (18:16 -0800)]
GIT 1.5.4-rc2
Although everybody was quiet during the Christmas holiday, it's been
a week since -rc1, so here is -rc2.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Dec 2007 01:52:40 +0000 (17:52 -0800)]
Merge branch 'rs/pretty-safety'
* rs/pretty-safety:
Make "--pretty=format" parser a bit more careful.
René Scharfe [Thu, 20 Dec 2007 12:20:15 +0000 (13:20 +0100)]
Make "--pretty=format" parser a bit more careful.
When a commit message that does not have a terminating LF is
read in and the memory that was allocated to read it happens to
have a LF immediately after that, the code was not careful and
went past the terminating NUL.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Dec 2007 01:38:00 +0000 (17:38 -0800)]
contrib: resurrect scripted git-revert.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Dec 2007 01:35:38 +0000 (17:35 -0800)]
Merge branch 'ar/commit-cleanup'
* ar/commit-cleanup:
Allow selection of different cleanup modes for commit messages
builtin-commit: avoid double-negation in the code.
builtin-commit: fix amending of the initial commit
t7005: do not exit inside test.
Junio C Hamano [Thu, 27 Dec 2007 01:13:36 +0000 (17:13 -0800)]
Fix rewrite_diff() name quoting.
This moves the logic to quote two paths (prefix + path) in
C-style introduced in the previous commit from the
dump_quoted_path() in combine-diff.c to quote.c, and uses it to
fix rewrite_diff() that never C-quoted the pathnames correctly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Dec 2007 00:51:19 +0000 (16:51 -0800)]
combine-diff: Fix path quoting
Earlier when showing combined diff, the filenames on the ---/+++
header lines were quoted incorrectly. a/ (or b/) prefix was
output literally and then the path was output, with c-quoting.
This fixes the quoting logic, and while at it, adjusts the code
to use the customizable prefix (a_prefix and b_prefix)
introduced recently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Dec 2007 00:04:05 +0000 (16:04 -0800)]
Fix documentation of --first-parent in git-log and copy it to git-rev-list
Credit goes to Avi Kivity for noticing the lack of description in
rev-list manual page.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Arjen Laarhoven [Tue, 25 Dec 2007 11:06:47 +0000 (12:06 +0100)]
Fix "git log --diff-filter" bug
In commit
b7bb760d5ed4881422673d32f869d140221d3564 (Fix revision
log diff setup, avoid unnecessary diff generation) an optimization was
made to avoid unnecessary diff generation. This was partly fixed in
99516e35d096f41e7133cacde8fbed8ee9a3ecd0 (Fix embarrassing "git log
--follow" bug). The '--diff-filter' option also needs the diff machinery
in action.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Tue, 25 Dec 2007 07:18:05 +0000 (02:18 -0500)]
Improve error messages when int/long cannot be parsed from config
If a config file has become mildly corrupted due to a missing LF
we may discover some other option joined up against the end of a
numeric value. For example:
[section]
number = 1auto
where the "auto" flag was meant to occur on the next line, below
"number", but the missing LF has caused it to no longer be its
own option. Instead the word "auto" is parsed as a 'unit factor'
for the value of "number".
Before this change we got the confusing error message:
fatal: unknown unit: 'auto'
which told us nothing about where the problem appeared. Now we get:
fatal: bad config value for 'aninvalid.unit'
which at least points the user in the right direction of where to
search for the incorrectly formatted configuration file.
Noticed by erikh on #git, which received the original error from
a simple `git checkout -b` due to a midly corrupted config.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 24 Dec 2007 03:08:19 +0000 (22:08 -0500)]
cvsimport: die on cvsps errors
We were not previously checking the exit status of cvsps at
all. If it exited before producing any useful output, we
ended up with an empty import, which caused a spew of
confusing error messages from other parts of git:
$ git-cvsimport foo
Initialized empty Git repository in ...
some error from cvsps
fatal: refs/heads/origin: not a valid SHA1
fatal: master: not a valid SHA1
warning: You appear to be on a branch yet to be born.
warning: Forcing checkout of HEAD.
fatal: just how do you expect me to merge 0 trees?
checkout failed: 256
Now we get:
$ git-cvsimport foo
Initialized empty Git repository in ...
some error from cvsps
git-cvsimport: fatal: cvsps reported error
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gustaf Hendeby [Sun, 23 Dec 2007 18:37:01 +0000 (10:37 -0800)]
shortlog manpage documentation: work around asciidoc markup issues
We wanted to have a list in which one (and the sole, as it happen to
be) item in it is ".mailmap", but do not seem to be able to convince
AsciiDoc to format it correctly for manpages. Reformat it into a
paragraph that describes the said file to work around the issue.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 23 Dec 2007 07:14:59 +0000 (23:14 -0800)]
Documentation: describe 'union' low-level merge driver
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Riesen [Sat, 22 Dec 2007 18:46:24 +0000 (19:46 +0100)]
Allow selection of different cleanup modes for commit messages
Although we traditionally stripped away excess blank lines, trailing
whitespaces and lines that begin with "#" from the commit log message,
sometimes the message just has to be the way user wants it.
For instance, a commit message template can contain lines that begin with
"#", the message must be kept as close to its original source as possible
if you are converting from a foreign SCM, or maybe the message has a shell
script including its comments for future reference.
The cleanup modes are default, verbatim, whitespace and strip. The
default mode depends on if the message is being edited and will either
strip whitespace and comments (if editor active) or just strip the
whitespace (for where the message is given explicitely).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 23 Dec 2007 03:25:37 +0000 (19:25 -0800)]
builtin-commit: avoid double-negation in the code.
The flag no_edit meant "we have got final message from the user
and will not editing it any further", but there were quite a few
places that needed to check !no_edit. Rename the variable to
use_editor and reverse the logic everywhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 23 Dec 2007 03:22:29 +0000 (19:22 -0800)]
builtin-commit: fix amending of the initial commit
When amending initial commit without editor, the command
incorrectly barfed because the check to see if there is anything
to commit referenced the non-existent HEAD^1.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 23 Dec 2007 03:14:33 +0000 (19:14 -0800)]
t7005: do not exit inside test.
The way to signal failure is to leave non-zero in $?, not abort
the entire test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Fri, 21 Dec 2007 10:56:32 +0000 (11:56 +0100)]
Don't dereference NULL upon lookup failure.
Instead, signal the error just like the case we do upon encountering
an object with an unknown type.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wincent Colaiuta [Sat, 22 Dec 2007 17:31:25 +0000 (18:31 +0100)]
Emit helpful status for accidental "git stash" save
If the user types "git stash" mistakenly thinking that this will list
their stashes he/she may be surprised to see that it actually saved
a new stash and reset their working tree and index.
In the worst case they might not know how to recover the state. So
help them by telling them exactly what was saved and also how to
restore it immediately.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pierre Habouzit [Thu, 13 Dec 2007 10:20:01 +0000 (11:20 +0100)]
parse-options: Add a gitcli(5) man page.
This page should hold every information about the git ways to parse command
lines, and best practices to be used for scripting.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Pierre Habouzit [Fri, 21 Dec 2007 10:41:41 +0000 (11:41 +0100)]
Force the sticked form for options with optional arguments.
This forbids "git tag -n <number> -l" we allowed earlier, so
adjust t7004 while at it.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Junio C Hamano [Sat, 22 Dec 2007 17:45:10 +0000 (09:45 -0800)]
Fix $EDITOR regression introduced by rewrite in C.
When git-tag and git-commit launches the editor, they used to
honor EDITOR="editor -options args..." but recent rewrite in C
insisted on $EDITOR to be the path to the editor executable.
This restores the older behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Sperling [Fri, 21 Dec 2007 15:57:26 +0000 (16:57 +0100)]
Small comment fix for git-cvsimport.
Signed-off-by: Stefan Sperling <stsp@stsp.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gustaf Hendeby [Sat, 22 Dec 2007 00:40:52 +0000 (01:40 +0100)]
Make git send-email accept $EDITOR with arguments
Currently git send-email does not accept $EDITOR with arguments, eg,
emacs -nw, when starting an editor to produce a cover letter. This
patch changes this by letting the shell handle the option parsing.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pierre Habouzit [Fri, 21 Dec 2007 10:50:58 +0000 (11:50 +0100)]
git-tag: fix -l switch handling regression.
The command itself takes an optional <pattern> argument that
limits the shown tags to the ones that match when in listing
mode that is triggered with '-l' option. The <pattern> is not
an optional option-argument to '-l'.
With this fix, "git tag -l -n 4 v0.99" works as expected.
It also removes a few bogus tests in t7004.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 21 Dec 2007 21:50:58 +0000 (13:50 -0800)]
Documentation: ls-files -v is about "assume unchanged".
And refer the reader to update-index documentation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 21 Dec 2007 04:22:46 +0000 (20:22 -0800)]
Re(-re)*fix trim_common_tail()
The tar-ball and the git archive itself is fine, but yes, the diff from
2.6.23 to 2.6.24-rc6 is bad. It's the "trim_common_tail()" optimization
that has caused way too much pain.
Very interesting breakage. The patch was actually "correct" in a (rather
limited) technical sense, but the context at the end was missing because
while the trim_common_tail() code made sure to keep enough common context
to allow a valid diff to be generated, the diff machinery itself could
decide that it could generate the diff differently than the "obvious"
solution.
Thee sad fact is that the git optimization (which is very important for
"git blame", which needs no context), is only really valid for that one
case where we really don't need any context.
[jc: since this is shared with "git diff -U0" codepath, context recovery
to the end of line needs to be done even for zero context case.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Thu, 20 Dec 2007 09:48:09 +0000 (10:48 +0100)]
gitweb: fix whitespace in config_to_multi (indent with tab)
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Thu, 20 Dec 2007 14:05:45 +0000 (15:05 +0100)]
everyday: replace 'prune' and 'repack' with 'gc'
In everyday tasks, "repack -a -d -f" won't be used, so there
is not much point mentioning "repack". By showing the --prune
option to "gc", we can do without mentioning "git prune", too.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Charles Bailey [Thu, 20 Dec 2007 13:00:40 +0000 (13:00 +0000)]
Remove old generated files from .gitignore.
Some entries in .gitignore are obselete. These should be cleaned up
just for the sake of general tidiness and so that any developers who
have a working tree that was moved forward without a clean know that
they have old stuff in their work tree.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 20 Dec 2007 12:11:25 +0000 (07:11 -0500)]
clean up 1.5.4 release notes
Mostly typo and small grammatical fixes with one or two rewordings for
clarity. But note the important fix for status.relativepaths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Thu, 20 Dec 2007 11:50:34 +0000 (12:50 +0100)]
Mention git-shell's "cvs" substitution in the RelNotes
git shell became much more powerful for existing CVS setups.
We should not hide from those people who only read release
notes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 20 Dec 2007 20:58:06 +0000 (12:58 -0800)]
shell-scripts usage(): consistently exit with non-zero
Earlier conversion of shell scripts to parse-options made usage()
to run "git cmd -h" which in turn emit LONG_USAGE and exit with 0
status. This is inconsistent with the scripts that do not use
parse-options, whose usage() died with the message, exiting with 1.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Thu, 20 Dec 2007 07:12:12 +0000 (02:12 -0500)]
Reallow git-rebase --interactive --continue if commit is unnecessary
During git-rebase --interactive's --continue implementation we used
to silently restart the rebase if the user had made the commit
for us. This is common if the user stops to edit a commit and
does so by amending it. My recent change to watch git-commit's
exit status broke this behavior.
Thanks to Bernt Hansen for catching it in 1.5.4-rc1.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 20 Dec 2007 03:23:03 +0000 (19:23 -0800)]
fix git commit --amend -m "new message"
The prepare_log_message() function serves two purposes:
- Prepares the commit log message template, to be given to the end
user;
- Return true if there is something committable;
7168624c3530d8c7ee32f930f8fb2ba302b9801f (Do not generate full commit
log message if it is not going to be used) cheated to omit the former
when we know the log message template is not going to be used. However,
its replacement logic to see if there is something committable was
botched. When amending, it should compare the index with the parent of
the HEAD, not the current HEAD. Otherwise you cannot run --amend to
fix only the message without changing the tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 20 Dec 2007 00:21:30 +0000 (16:21 -0800)]
t4024: fix test script to use simpler sed pattern
The earlier test stripped away expected number of 'z' but the output
would have been very hard to read once somebody broke the common tail
optimization. Instead, count the number of 'z' and show it, to help
diagnosing the problem better in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Tue, 18 Dec 2007 19:32:14 +0000 (19:32 +0000)]
Teach diff machinery to display other prefixes than "a/" and "b/"
With the new options "--src-prefix=<prefix>", "--dst-prefix=<prefix>"
and "--no-prefix", you can now control the path prefixes of the diff
machinery. These used to by hardwired to "a/" for the source prefix
and "b/" for the destination prefix.
Initial patch by Pascal Obry. Sane option names suggested by Linus.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 20 Dec 2007 01:21:04 +0000 (17:21 -0800)]
GIT 1.5.4-rc1
It's been a week since -rc0, and we have quite a lot of fixes,
so here it is.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Wed, 19 Dec 2007 06:45:00 +0000 (01:45 -0500)]
Catch and handle git-commit failures in git-rebase --interactive
If git-commit fails for any reason then git-rebase needs to stop
and not plow through the rest of the series. Its unlikely that
a future git-commit will succeed if the current attempt failed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Wed, 19 Dec 2007 06:41:26 +0000 (01:41 -0500)]
Avoid update hook during git-rebase --interactive
If we are rebasing changes that contain potential whitespace
errors that our .git/hooks/pre-commit hook looks for and fails
on then git-commit will fail to commit that change. This causes
git-rebase--interactive to squash commits together, even though it
was not requested to do so by the todo file.
Passing --no-verify to git-commit makes git-rebase -i behave more
like git-rebase normally would in such conditions, providing more
consistent behavior between the different rebase implementations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finn Arne Gangstad [Tue, 18 Dec 2007 19:50:28 +0000 (20:50 +0100)]
Improved submodule merge support
When merging conflicting submodule changes from a supermodule, generate
a conflict message saying what went wrong. Also leave the tree in a state
where git status shows the conflict, and git submodule status gives the user
enough information to do the merge manally. Previously this would just fail.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sean [Wed, 19 Dec 2007 21:34:27 +0000 (16:34 -0500)]
Fix interactive rebase to preserve author email address
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Wed, 19 Dec 2007 17:53:16 +0000 (12:53 -0500)]
make 'git describe --all --contains' work
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Charles Bailey [Wed, 19 Dec 2007 12:25:27 +0000 (12:25 +0000)]
Fix git-instaweb breakage on MacOS X due to the limited sed functionality
git-instaweb relied on a pipe in a sed script, but this is not supported
by MacOS X sed when using BREs. git-instaweb relies on a working perl
in any case, and perl re are more consistent between platforms, so
replace sed invocation with an equivalent perl invocation.
Also, fix the documented -b "" to work without giving a spurious 'command
not found' error.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 19 Dec 2007 15:43:50 +0000 (10:43 -0500)]
test "git clone -o"
This tests a recently fixed regression in which "git clone
-o" didn't work at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marco Roeland [Wed, 19 Dec 2007 09:15:15 +0000 (10:15 +0100)]
clone: fix options '-o' and '--origin' to be recognised again
Due to a subtle typo in a shell case pattern neither alternative worked.
Signed-off-by: Marco Roeland <marco.roeland@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Tue, 18 Dec 2007 18:01:33 +0000 (18:01 +0000)]
git show <tag>: show the tagger
For commit objects, the Author is shown, so do the equivalent for
tag objects, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 19 Dec 2007 08:31:43 +0000 (00:31 -0800)]
git-svn: avoid warning when run without arguments
While we're in the area, finish writing a halfway-written
comment describing what that block does...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Eric Wong [Wed, 19 Dec 2007 08:06:45 +0000 (00:06 -0800)]
git-svn: workaround a for broken symlinks in SVN
It's possible for bad clients to commit symlinks without the
5-character "link " prefix in symlinks. So guard around this
bug in SVN and make a best effort to create symlinks if the
"link " prefix is missing.
More information on this SVN bug is described here:
http://subversion.tigris.org/issues/show_bug.cgi?id=2692
To be pedantic, there is still a corner case that neither we nor
SVN can handle: If somebody made a link using a broken SVN
client where "link " is the first part of its path, e.g.
"link sausage", then we'd end up having a symlink which points
to "sausage" because we incorrectly stripped the "link ".
Hopefully this hasn't happened in practice, but if it has,
it's not our fault SVN is broken :)
Thanks to Benoit Sigoure and Sverre Johansen for reporting
and feedback.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Eric Wong [Sun, 16 Dec 2007 03:08:22 +0000 (19:08 -0800)]
git-svn: avoid leaving leftover committer/author info in rebase
We set the 6 environment variables for controlling
committer/author email/name/time for every commit.
We do this in the parent process to be passed to
git-commit-tree, because open3() doesn't afford us the control
of doing it only in the child process. This means we leave them
hanging around in the main process until the next revision comes
around and all 6 environment variables are overwridden again.
Unfortunately, for the last commit, leaving them hanging around
means the git-rebase invocation will pick it up, rewriting the
rebased commit with incorrect author information. This should fix
it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Nicolas Pitre [Tue, 18 Dec 2007 15:15:39 +0000 (10:15 -0500)]
fix style of a few comments in diff-delta.c
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Tue, 18 Dec 2007 10:03:23 +0000 (11:03 +0100)]
git-filter-branch.sh: more portable tr usage: use \012, not \n.
I hesitate to suggest this, since GNU tr has accepted \n for 15 years,
but there are supposedly a few crufty vendor-supplied versions of tr still
in use. Also, all of the other uses of tr-with-newline in git use \012.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Tue, 18 Dec 2007 07:30:47 +0000 (08:30 +0100)]
filter-branch: Remove broken and unnecessary summary of rewritten refs.
There was an attempt to list the refs that were rewritten by filtering
the output of 'git show-ref' for 'refs/original'. But it got the
grep argument wrong, which did not account for the SHA1 that is listed
before the ref.
Moreover, right before this summary is the loop that actually does the
rewriting, and the rewritten refs are listed there anyway. So this extra
summary is plainly too verbose.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ralf Wildenhues [Tue, 18 Dec 2007 06:07:36 +0000 (07:07 +0100)]
Fix some documentation typos.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 18 Dec 2007 09:46:04 +0000 (01:46 -0800)]
builtin-blame.c: remove unneeded memclr()
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Tue, 18 Dec 2007 06:12:03 +0000 (22:12 -0800)]
unpack-trees: FLEX_ARRAY fix
In unpack-trees.c (line 593), we do
..
if (same(old, merge)) {
*merge = *old;
} else {
..
and that "merge" is a cache_entry pointer. If we have a non-zero
FLEX_ARRAY size, it will cause us to copy the first few bytes of the
name too.
That is technically wrong even for FLEX_ARRAY being 1, but you'll never
notice, since the filenames should always be the same with the current
code. But if we do the same thing for a rename, we'd be screwed.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pierre Habouzit [Tue, 18 Dec 2007 01:39:57 +0000 (02:39 +0100)]
Fix segfault in diff-delta.c when FLEX_ARRAY is 1
aka don't do pointer arithmetics on structs that have a FLEX_ARRAY member,
or you'll end up believing your array is 1 cell off its real address.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 18 Dec 2007 04:49:42 +0000 (20:49 -0800)]
Merge branch 'maint'
* maint:
git-send-email: avoid duplicate message-ids
clone: correctly report http_fetch errors
Johannes Schindelin [Mon, 17 Dec 2007 21:01:25 +0000 (21:01 +0000)]
rebase -p -i: handle "no changes" gracefully
Since commit
376ccb8cbb453343998e734d8a1ce79f57a4e092 (rebase -i: style
fixes and minor cleanups), unchanged SHA-1s are no longer mapped via
$REWRITTEN. But the updating phase was not prepared for the old head
not being rewritten.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Mon, 17 Dec 2007 12:21:22 +0000 (12:21 +0000)]
Document diff.external and mergetool.<tool>.path
There was no documentation for the config variables diff.external
and mergetool.<tool>.path.
Noticed by Sebastian Schuberth.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Mon, 17 Dec 2007 13:42:20 +0000 (13:42 +0000)]
Support config variable diff.external
We had the diff.external variable in the documentation of the config
file since its conception, but failed to respect it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Mon, 17 Dec 2007 09:08:23 +0000 (10:08 +0100)]
Clean up documentation that references deprecated 'git peek-remote'.
Now that 'git peek-remote' is deprecated and only an alias for
'git ls-remote', it should not be referenced from other manual pages.
This also removes the description of the --exec option, which is no
longer present.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sam Vilain [Mon, 17 Dec 2007 12:00:43 +0000 (01:00 +1300)]
Clarify error response from 'git fetch' for bad responses
This error message prints the reponse from the server at this point.
Label it as such in the output.
Signed-off-by: Sam Vilain <sam@vilain.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
H.Merijn Brand [Mon, 17 Dec 2007 22:28:46 +0000 (23:28 +0100)]
the use of 'tr' in the test suite isn't really portable
Some versions of 'tr' only accept octal codes if entered with three digits,
and therefor misinterpret the '\0' in the test suite.
Some versions of 'tr' reject the (needless) use of character classes.
Signed-off-by: H.Merijn Brand <h.m.brand@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Mon, 17 Dec 2007 19:12:52 +0000 (20:12 +0100)]
Plug a resource leak in threaded pack-objects code.
A mutex and a condition variable is allocated for each thread and torn
down when the thread terminates. However, for certain workloads it can
happen that some threads are actually not started at all. In this case
we would leak the mutex and condition variable. Now we allocate them only
for those threads that are actually started.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 17 Dec 2007 20:51:34 +0000 (15:51 -0500)]
git-send-email: avoid duplicate message-ids
We used to unconditionally add a message-id to the outgoing
email without bothering to check if it already had one.
Instead, let's use the existing one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 17 Dec 2007 12:43:59 +0000 (07:43 -0500)]
clone: correctly report http_fetch errors
The exit status from curl was accidentally lost by the
'case' statement. We need to explicitly save it so that $?
doesn't get overwritten.
This improves the error message when fetching from an http
repository which has never had update-server-info run.
Previously, it would fail to note the fetch error and
produce multiple errors about the lack of origin branches.
It now correctly suggests running git-update-server-info.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 17 Dec 2007 06:03:21 +0000 (22:03 -0800)]
Documentation/git-submodule: refer to gitmodules(5)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sun, 16 Dec 2007 19:45:34 +0000 (20:45 +0100)]
threaded pack-objects: Use condition variables for thread communication.
In the threaded pack-objects code the main thread and the worker threads
must mutually signal that they have assigned a new pack of work or have
completed their work, respectively. Previously, the code used mutexes that
were locked in one thread and unlocked from a different thread, which is
bogus (and happens to work on Linux).
Here we rectify the implementation by using condition variables: There is
one condition variable on which the main thread waits until a thread
requests new work; and each worker thread has its own condition variable
on which it waits until it is assigned new work or signaled to terminate.
As a cleanup, the worker threads are spawned only after the initial work
packages have been assigned.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 16 Dec 2007 23:05:39 +0000 (15:05 -0800)]
builtin-commit: make summary output consistent with status
This enables -B -M to the summary output after a commit is made so that
it is in line with what is shown in git-status and commit log template.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 16 Dec 2007 23:03:58 +0000 (15:03 -0800)]
builtin-commit: fix summary output.
Because print_summary() forgot to call diff_setup_done() after futzing with
diff output options, it failed to activate recursive diff, which resulted in
an incorrect summary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
J. Bruce Fields [Sun, 16 Dec 2007 17:58:02 +0000 (12:58 -0500)]
builtin-apply: stronger indent-with-on-tab fixing
Fix any sequence of 8 spaces in initial indent, not just the case where
the 8 spaces are the first thing on the line.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
J. Bruce Fields [Sun, 16 Dec 2007 17:58:01 +0000 (12:58 -0500)]
builtin-apply: minor cleanup of whitespace detection
Use 0 instead of -1 for the case where not tabs or spaces are found; it
will make some later math slightly simpler.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 16 Dec 2007 21:49:17 +0000 (13:49 -0800)]
Re-re-re-fix common tail optimization
We need to be extra careful recovering the removed common section, so
that we do not break context nor the changed incomplete line (i.e. the
last line that does not end with LF).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
J. Bruce Fields [Sun, 16 Dec 2007 16:31:42 +0000 (11:31 -0500)]
whitespace: fix config.txt description of indent-with-non-tab
Fix garbled description.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
J. Bruce Fields [Sun, 16 Dec 2007 16:31:41 +0000 (11:31 -0500)]
whitespace: more accurate initial-indent highlighting
Instead of highlighting the entire initial indent, highlight only the
problematic spaces.
In the case of an indent like ' \t \t' there may be multiple problematic
ranges, so it's easiest to emit the highlighting as we go instead of
trying rember disjoint ranges and do it all at the end.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
J. Bruce Fields [Sun, 16 Dec 2007 16:31:40 +0000 (11:31 -0500)]
whitespace: fix initial-indent checking
After this patch, "written" counts the number of bytes up to and
including the most recently seen tab. This allows us to detect (and
count) spaces by comparing to "i".
This allows catching initial indents like '\t ' (a tab followed
by 8 spaces), while previously indent-with-non-tab caught only indents
that consisted entirely of spaces.
This also allows fixing an indent-with-non-tab regression, so we can
again detect indents like '\t \t'.
Also update tests to catch these cases.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
J. Bruce Fields [Sun, 16 Dec 2007 16:31:39 +0000 (11:31 -0500)]
whitespace: minor cleanup
The variable leading_space is initially used to represent the index of
the last space seen before a non-space. Then later it represents the
index of the first non-indent character.
It will prove simpler to replace it by a variable representing a number
of bytes. Eventually it will represent the number of bytes written so
far (in the stream != NULL case).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
J. Bruce Fields [Sun, 16 Dec 2007 16:31:38 +0000 (11:31 -0500)]
whitespace: reorganize initial-indent check
Reorganize to emphasize the most complicated part of the code (the tab
case).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
J. Bruce Fields [Sun, 16 Dec 2007 16:31:37 +0000 (11:31 -0500)]
whitespace: fix off-by-one error in non-space-in-indent checking
If there were no tabs, and the last space was at position 7, then
positions 0..7 had spaces, so there were 8 spaces.
Update test to check exactly this case.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sun, 16 Dec 2007 07:21:04 +0000 (02:21 -0500)]
rename git-browse--help to git-help--browse
The convention for helper scripts has been
git-$TOOL--$HELPER. Since this is a "browse" helper for the
"help" tool, git-help--browse is a more sensible name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
李鸿 [Sun, 16 Dec 2007 04:53:26 +0000 (12:53 +0800)]
Fix a memory leak
Signed-off-by: Li Hong <leehong@pku.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Petr Baudis [Sat, 8 Dec 2007 11:30:59 +0000 (12:30 +0100)]
gitweb: Make config_to_multi return [] instead of [undef]
This is important for the list of clone urls, where if there are
no per-repository clone URL configured, the default base URLs
are never used for URL construction without this patch.
Add tests for different ways of setting project URLs, just in case.
Note that those tests in current form wouldn't detect breakage fixed
by this patch, as it only checks for errors and not for expected
output.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sat, 15 Dec 2007 14:41:49 +0000 (15:41 +0100)]
gitweb: Teach "a=blob" action to be more lenient about blob/file mime type
Since
930cf7dd7cc6b87d173f182230763e1f1913d319 'blob' action knows the
file type; if the file type is not "text/*" or one of common network
image formats/mimetypes (gif, png, jpeg) then the action "blob"
defaulted to "blob_plain". This caused the problem if mimetypes file
was not well suited for web, for example returning "application/x-sh"
for "*.sh" shell scripts, instead of "text/plain" (or other "text/*").
Now "blob" action defaults to "blob_plain" ('raw' view) only if file
is of type which is neither "text/*" nor "image/{gif,png,jpeg}"
AND it is binary file. Otherwise it assumes that it can be displayed
either in <img> tag ("image/*" mimetype), or can be displayed line by
line (otherwise).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sat, 15 Dec 2007 14:40:28 +0000 (15:40 +0100)]
gitweb: disambiguate heads and tags withs the same name
Avoid wrong disambiguation that would link logs/trees of tags and
heads which share the same name to the same page, leading to
a disambiguation that would prefer the tag, thus making it impossible
to access the corresponding head log and tree without hacking the url
by hand.
It does it by using full refname (with 'refs/heads/' or 'refs/tags/'
prefix) instead of shortened one in the URLs in 'heads' and 'tags'
tables. This makes URLs (and refs) provided by gitweb unambiguous.
Signed-off-by: Guillaume Seguin <guillaume@segu.in>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 15 Dec 2007 11:11:54 +0000 (06:11 -0500)]
teach bash completion to treat commands with "--" as a helper
There is a convention that commands containing a double-dash
are implementation details and not to be used by mortals. We
should automatically remove them from the completion
suggestions as such.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sun, 16 Dec 2007 07:06:14 +0000 (02:06 -0500)]
trim_common_tail: brown paper bag fix.
The recovered context lines were not LF terminated due to off-by-one
error, which also caused the outer loop to count the number of recovered
lines to terminate after running only once.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 15 Dec 2007 06:30:38 +0000 (22:30 -0800)]
Update draft release notes for 1.5.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 25 Nov 2007 07:48:04 +0000 (23:48 -0800)]
Start preparing the API documents.
Most of them are still stubs, but the procedure to build the HTML
documentation, maintaining the index and installing the end product are
there.
I placed names of people who are likely to know the most about the topic
in the stub files, so that volunteers will know whom to ask questions as
needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 15 Dec 2007 06:08:25 +0000 (22:08 -0800)]
Retire git-runstatus for real.
The command was removed from the builtin command list and there was no
way to invoke it, but the code was still there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 15 Dec 2007 06:02:57 +0000 (22:02 -0800)]
Rename git-browse-help helper to git-browse--help
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Sat, 15 Dec 2007 04:57:28 +0000 (05:57 +0100)]
git-help: add "help.format" config variable.
This config variable makes it possible to choose the default format
used to display help. This format will be used only if no option
like -a|--all|-i|--info|-m|--man|-w|--web is passed to "git-help".
The following values are possible for this variable:
- "man" --> "man" program is used
- "info" --> "info" program is used
- "web" --> "git-browse-help" is used
By default we still show help using "man".
This patch also adds -m|--man command line option to use "man"
to allow overriding the "help.format" configuration variable.
Note that this patch also revert some recent changes in
"git-browse-help" because they prevented to look for config
variables in the global configuration file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 15 Dec 2007 05:42:53 +0000 (21:42 -0800)]
Merge branch 'wc/diff'
* wc/diff:
Test interaction between diff --check and --exit-code
Use shorter error messages for whitespace problems
Add tests for "git diff --check" with core.whitespace options
Make "diff --check" output match "git apply"
Unify whitespace checking
diff --check: minor fixups
"diff --check" should affect exit status
Mike Hommey [Mon, 10 Dec 2007 23:08:25 +0000 (00:08 +0100)]
Move fetch_ref from http-push.c and http-walker.c to http.c
Make the necessary changes to be ok with their difference, and rename the
function http_fetch_ref.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>