OSDN Git Service
Fabrice Gasnier [Thu, 23 Apr 2020 11:55:54 +0000 (13:55 +0200)]
usb: gadget: u_serial: add suspend resume callbacks
Add suspend resume callbacks to handle the case seen when the bus is
suspended by the HOST, and the device opens the port (cat /dev/ttyGS0).
Gadget controller (like DWC2) doesn't accept usb requests to be queued in
this case (when in L2 state), from the gs_open() call. Error log is printed
- configfs-gadget gadget: acm ttyGS0 can't notify serial state, -11
If the HOST resumes (opens) the bus, the port still isn't functional.
Use suspend/resume callbacks to monitor the gadget suspended state by using
'suspended' flag. In case the port gets opened (cat /dev/ttyGS0), the I/O
stream will be delayed until the bus gets resumed by the HOST.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fabrice Gasnier [Thu, 23 Apr 2020 11:55:53 +0000 (13:55 +0200)]
usb: dwc2: gadget: move gadget resume after the core is in L0 state
When the remote wakeup interrupt is triggered, lx_state is resumed from L2
to L0 state. But when the gadget resume is called, lx_state is still L2.
This prevents the resume callback to queue any request. Any attempt
to queue a request from resume callback will result in:
- "submit request only in active state" debug message to be issued
- dwc2_hsotg_ep_queue() returns -EAGAIN
Call the gadget resume routine after the core is in L0 state.
Fixes:
f81f46e1f530 ("usb: dwc2: implement hibernation during bus suspend/resume")
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Michael Grzeschik [Tue, 21 Apr 2020 13:28:14 +0000 (15:28 +0200)]
usb: gadget: uvc_video: add worker to handle the frame pumping
This patch changes the function uvc_video_pump to be a separate
scheduled worker. This way the completion handler of each usb request
and every direct caller of the pump has only to schedule the worker
instead of doing the request handling by itself.
Moving the request handling to one thread solves the locking problems
between the three queueing cases in the completion handler, v4l2_qbuf
and video_enable.
Many drivers handle the completion handlers directly in their interrupt
handlers. This patch also reduces the workload on each interrupt.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Nishad Kamdar [Sun, 19 Apr 2020 12:57:10 +0000 (18:27 +0530)]
usb: renesas_usbhs: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in
header files related to Renesas USBHS Controller Drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Jason Yan [Sat, 18 Apr 2020 08:18:07 +0000 (16:18 +0800)]
usb: gadget: f_fs: remove unneeded semicolon in __ffs_data_got_descs()
Fix the following coccicheck warning:
drivers/usb/gadget/function/f_fs.c:2507:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Martin Blumenstingl [Thu, 16 Apr 2020 12:19:10 +0000 (14:19 +0200)]
dt-bindings: usb: dwc3: remove old DWC3 wrapper
There is now an updated bindings for these SoCs making the old
compatible obsolete.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Neil Armstrong [Thu, 16 Apr 2020 12:19:09 +0000 (14:19 +0200)]
doc: dt: bindings: usb: dwc3: remove amlogic compatible entries
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Martin Blumenstingl [Thu, 16 Apr 2020 12:19:08 +0000 (14:19 +0200)]
usb: dwc3: of-simple: remove Amlogic GXL and AXG compatibles
There is now a dedicated driver for these SoCs making the old compatible
obsolete.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Martin Blumenstingl [Thu, 16 Apr 2020 12:19:07 +0000 (14:19 +0200)]
phy: amlogic: meson-gxl-usb3: remove code for non-existing PHY
The registers which are managed by the meson-gxl-usb3 PHY driver are
actually "USB control" registers (which are "glue" registers which
manage OTG detection and routing of the OTG capable port between the
DWC2 peripheral-only controller and the DWC3 host-only controller).
Drop the meson-gxl-usb3 PHY driver now that the dwc3-meson-g12a-usb
driver supports the USB control registers on GXL and GXM SoCs (these
were previously managed by the meson-gxl-usb3 PHY driver).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Martin Blumenstingl [Thu, 16 Apr 2020 12:19:06 +0000 (14:19 +0200)]
arm64: dts: amlogic: use the new USB control driver for GXL and GXM
Add the correcly architectured USB Glue node and adapt all the Amlogic
GXL and GXM board to the new organization.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Neil Armstrong [Thu, 16 Apr 2020 12:19:05 +0000 (14:19 +0200)]
usb: dwc3: meson-g12a: add support for GXL and GXM SoCs
In order to add support for the Amlogic GXL/GXM USB Glue, this adds
the corresponding :
- PHY names
- clock names
- USB2 PHY init and mode set
- regmap setup
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Neil Armstrong [Thu, 16 Apr 2020 12:19:04 +0000 (14:19 +0200)]
usb: dwc3: meson-g12a: support the GXL/GXM DWC3 host phy disconnect
On the Amlogic GXL/GXM SoCs, the OTG PHY status signals are always
connected to the DWC3 controller, thus crashing the controller when
switching to OTG mode when port is not populated with a device/cable to
Host.
Amlogic added a bit to disconnect the OTG PHY status signals from the DWC3
to be used when switching the OTG PHY as Device to the DWC2 controller.
The drawback is that it makes the DWC3 port state machine stall and needs
a full reset of the DWC3 controller to get connect status to the port
connected to the OTG PHY, but not the other one.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Neil Armstrong [Thu, 16 Apr 2020 12:19:03 +0000 (14:19 +0200)]
usb: dwc3: meson-g12a: refactor usb init
Refactor the USB init code patch to handle the Amlogic GXL/GXM needing
to initialize the OTG port as Peripheral mode for the DWC2 IP to probe
correctly.
A secondary, post_init callback is added to setup the OTG PHY mode after
powering up the PHYs and before probing the DWC2 and DWC3 controllers.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Jason Yan [Fri, 17 Apr 2020 07:31:37 +0000 (15:31 +0800)]
usb: gadget: udc: remove unused 'driver_desc'
Fix the following gcc warning:
drivers/usb/gadget/udc/gr_udc.c:51:19: warning: ‘driver_desc’ defined
but not used [-Wunused-const-variable=]
static const char driver_desc[] = DRIVER_DESC;
^~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Christophe JAILLET [Sat, 11 Apr 2020 06:56:21 +0000 (08:56 +0200)]
usb: gadget: max3420: Add a missing '\n' in a log message
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
Fixes:
48ba02b2e2b1 ("usb: gadget: add udc driver for max3420")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Nishad Kamdar [Sat, 4 Apr 2020 10:37:31 +0000 (16:07 +0530)]
USB: mtu3: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in
header files related to MediaTek USB3 Dual Role controller.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Peter Chen [Tue, 31 Mar 2020 08:10:05 +0000 (16:10 +0800)]
usb: cdns3: change dev_info to dev_dbg for debug message
During device mode initialization, lots of device information
are printed to console, see below. Change them as debug message.
cdns-usb3
5b130000.cdns3: Initialized ep0 support:
cdns-usb3
5b130000.cdns3: Initialized ep1out support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep2out support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep3out support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep4out support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep5out support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep6out support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep7out support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep1in support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep2in support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep3in support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep4in support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep5in support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep6in support: BULK, INT ISO
cdns-usb3
5b130000.cdns3: Initialized ep7in support: BULK, INT ISO
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Peter Chen [Tue, 31 Mar 2020 08:10:04 +0000 (16:10 +0800)]
usb: cdns3: change "cdsn3" to"cdns3"
And delete cdsn3_hw_role_state_machine declare which doesn't
be needed.
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Peter Chen [Tue, 31 Mar 2020 08:10:03 +0000 (16:10 +0800)]
usb: cdns3: delete role_override
In short, we have three kinds of role switches:
- Based on SoC: ID and VBUS
- Based on external connnctor, eg, Type-C or GPIO Connector
- Based on user choices through sysfs
Since HW handling and usb-role-switch handling are at
different places, we do not need role_override any more,
and this flag could not judge external connector case well.
With role_override deleted, We use cdns3_hw_role_switch for
the 1st use case, and usb-role-switch for the 2nd and 3rd cases.
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Peter Chen [Tue, 31 Mar 2020 08:10:02 +0000 (16:10 +0800)]
usb: cdns3: core: get role switch node from firmware
After that, the role switch device (eg, Type-C device) could call
cdns3_role_set to finish the role switch.
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Thinh Nguyen [Tue, 31 Mar 2020 08:40:42 +0000 (01:40 -0700)]
usb: dwc3: gadget: Continue to process pending requests
If there are still pending requests because no TRB was available,
prepare more when started requests are completed.
Introduce dwc3_gadget_ep_should_continue() to check for incomplete and
pending requests to resume updating new TRBs to the controller's TRB
cache.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Nagarjuna Kristam [Thu, 14 May 2020 06:22:37 +0000 (11:52 +0530)]
usb: gadget: tegra-xudc: Add vbus_draw support
Register vbus_draw to gadget ops and update corresponding vbus
draw current to usb_phy.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Thinh Nguyen [Sun, 29 Mar 2020 23:13:16 +0000 (16:13 -0700)]
usb: dwc3: gadget: WARN on no-resource status
If the driver issued START_TRANSFER and received a no-resource status,
then generally there are a few reasons for this:
1) The driver did not allocate resource for the endpoint during
power-on-reset initialization.
2) The transfer resource was reset. At this moment, we don't do this in
the driver, but it occurs when the driver issues START_CONFIG cmd to ep0
with resource index=2.
3) The driver issues the START_TRANSFER command to an already started
endpoint. Usually, this is because the END_TRANSFER command hasn't
completed yet.
Print out a warning to help debug this issue in the driver.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Thinh Nguyen [Sun, 29 Mar 2020 23:13:10 +0000 (16:13 -0700)]
usb: dwc3: gadget: Issue END_TRANSFER to retry isoc transfer
After a number of unsuccessful start isoc attempts due to bus-expiry
status, issue END_TRANSFER command and retry on the next XferNotReady
event.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Thinh Nguyen [Sun, 29 Mar 2020 23:13:04 +0000 (16:13 -0700)]
usb: dwc3: gadget: Store resource index of start cmd
As long as the START_TRANSFER command completes, it provides the
resource index of the endpoint. Use this when we need to issue
END_TRANSFER command to an isoc endpoint to retry with a new
XferNotReady event.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Thinh Nguyen [Sun, 29 Mar 2020 23:12:57 +0000 (16:12 -0700)]
usb: dwc3: gadget: Properly handle failed kick_transfer
If dwc3 fails to issue START_TRANSFER/UPDATE_TRANSFER command, then we
should properly end an active transfer and give back all the started
requests. However if it's for an isoc endpoint, the failure maybe due to
bus-expiry status. In this case, don't give back the requests and wait
for the next retry.
Fixes:
72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Thinh Nguyen [Mon, 30 Mar 2020 00:10:05 +0000 (17:10 -0700)]
usb: dwc3: core: Use role-switch default dr_mode
If the driver is configured to use DRD role-switch, let the drd code
path decide the default dr_mode.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Thinh Nguyen [Mon, 30 Mar 2020 00:09:59 +0000 (17:09 -0700)]
usb: dwc3: drd: Don't free non-existing irq
If the driver is configured to use DRD role-switch, it's not OTG. There
won't be OTG irq to free. Check for dwc->otg_irq before freeing it.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Neil Armstrong [Thu, 26 Mar 2020 13:44:58 +0000 (14:44 +0100)]
usb: dwc3: meson-g12a: refactor usb2 phy init
Refactor the USB2 PHY init code patch to handle the Amlogic GXL/GXM
not having the PHY mode control registers in the Glue but in the PHY
registers.
The Amlogic GXL/GXM will call phy_set_mode() instead of programming the
PHY mode control registers, thus add two new callbacks to the SoC match
data.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Neil Armstrong [Thu, 26 Mar 2020 13:44:57 +0000 (14:44 +0100)]
usb: dwc3: meson-g12a: check return of dwc3_meson_g12a_usb_init
The dwc3_meson_g12a_usb_init function can return an error, check it.
Fixes:
c99993376f72ca ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Neil Armstrong [Thu, 26 Mar 2020 13:44:56 +0000 (14:44 +0100)]
usb: dwc3: meson-g12a: get the reset as shared
In order to support the Amlogic GXL/GXM SoCs, the reset line must
be handled as shared since also used by the PHYs.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Neil Armstrong [Thu, 26 Mar 2020 13:44:55 +0000 (14:44 +0100)]
usb: dwc3: meson-g12a: handle the phy and glue registers separately
On the Amlogic GXL/GXM SoCs, only the USB control registers are available,
the PHY mode being handled in the PHY registers.
Thus, handle the PHY mode registers in separate regmaps and prepare
support for Amlogic GXL/GXM SoCs by moving the regmap setup in a callback
set in the SoC match data.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Neil Armstrong [Thu, 26 Mar 2020 13:44:54 +0000 (14:44 +0100)]
usb: dwc3: meson-g12a: specify phy names in soc data
To handle the variable USB2 PHY counts on GXL and GXM SoCs, add the
possible PHY names for each SoC in the compatible match data.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Neil Armstrong [Thu, 26 Mar 2020 13:44:53 +0000 (14:44 +0100)]
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic GXL and GXM Families USB Glue Bindings
The Amlogic GXL and GXM is slightly different from the Amlogic G12A Glue.
The GXL SoCs only embeds 2 USB2 PHYs and no USB3 PHYs, and the GXM SoCs
embeds 3 USB2 PHYs.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Sandeep Maheswaram [Thu, 26 Mar 2020 07:06:08 +0000 (12:36 +0530)]
dt-bindings: usb: qcom,dwc3: Add compatible for SC7180
Add compatible for SC7180 in usb dwc3 bindings.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Sandeep Maheswaram [Thu, 26 Mar 2020 07:06:07 +0000 (12:36 +0530)]
dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
Convert USB DWC3 bindings to DT schema format using json-schema.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Thinh Nguyen [Thu, 5 Mar 2020 21:24:20 +0000 (13:24 -0800)]
usb: dwc3: gadget: Refactor dwc3_gadget_ep_dequeue
The flow from function dwc3_gadget_ep_dequeue() is not easy to follow.
Refactor it for easier read. No functional change in this commit.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Thinh Nguyen [Thu, 5 Mar 2020 21:24:14 +0000 (13:24 -0800)]
usb: dwc3: gadget: Remove unnecessary checks
Remove 2 unnecessary checks:
1) A request in the started_list must have its trb field set. So
checking for req->trb is unnecessary.
2) An endpoint must have started (and have not ended) for the request to
still be in the started_list. There's no point to check if the endpoint
is started. We had this check because previously the driver didn't
handle the endpoint's started/ended flags for END_TRANSFER command
properly. See commit
9f45581f5eec ("usb: dwc3: gadget: early giveback
if End Transfer already completed").
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Thinh Nguyen [Thu, 5 Mar 2020 21:24:08 +0000 (13:24 -0800)]
usb: dwc3: gadget: Give back staled requests
If a request is dequeued, the transfer is cancelled. Give back all
the started requests.
In most scenarios, the function driver dequeues all requests of a
transfer when there's a failure. If the function driver follows this,
then it's fine. If not, then we'd be skipping TRBs at different points
within the dequeue and enqueue pointers, making dequeue/enqueue pointers
useless. To enforce and make sure that we're properly skipping TRBs,
cancel all the started requests and give back all the cancelled requests
to the function drivers.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Thinh Nguyen [Thu, 5 Mar 2020 21:23:55 +0000 (13:23 -0800)]
usb: dwc3: gadget: Properly handle ClearFeature(halt)
DWC3 must not issue CLEAR_STALL command to control endpoints. The
controller automatically clears the STALL when it receives the SETUP
token. Also, when the driver receives ClearFeature(halt_ep), DWC3 must
stop any active transfer from the endpoint and give back all the
requests to the function drivers.
Fixes:
72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Tao Ren [Sun, 15 Mar 2020 19:16:32 +0000 (12:16 -0700)]
dt-bindings: usb: document aspeed vhub device ID/string properties
Update device tree binding document for aspeed vhub's device IDs and
string properties.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Tao Ren [Sun, 15 Mar 2020 19:16:31 +0000 (12:16 -0700)]
usb: gadget: aspeed: fixup usb1 device descriptor at init time
This patch moves patch-usb1-dev-desc logic from get-descriptor handler
to "ast_vhub_fixup_usb1_dev_desc" function so the code is executed only
once (at vhub initial time).
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Tao Ren [Sun, 15 Mar 2020 19:16:30 +0000 (12:16 -0700)]
usb: gadget: aspeed: allow to set device IDs in device tree
The patch overrides idVendor, idProduct and bcdDevice fields in vhub
Device Descriptor if according device tree properties are defined.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Tao Ren [Sun, 15 Mar 2020 19:16:29 +0000 (12:16 -0700)]
usb: gadget: aspeed: allow to set usb strings in device tree
If "vhub,string-descriptor" device tree property is defined, the driver
will load string descriptors from device tree; otherwise, the default
string descriptors will be used.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Tao Ren [Sun, 15 Mar 2020 19:16:28 +0000 (12:16 -0700)]
usb: gadget: add "usb_validate_langid" function
The USB LANGID validation code in "check_user_usb_string" function is
moved to "usb_validate_langid" function which can be used by other usb
gadget drivers.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Tao Ren [Sun, 15 Mar 2020 19:16:27 +0000 (12:16 -0700)]
usb: gadget: aspeed: support multiple language strings
This patch introduces a link list to store string descriptors with
different languages, and "ast_vhub_rep_string" function is also improved
to support multiple language usb strings.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Tao Ren [Sun, 15 Mar 2020 19:14:30 +0000 (12:14 -0700)]
usb: gadget: aspeed: improve vhub port irq handling
This patch evaluates vhub ports' irq mask before going through per-port
irq handling one by one, which helps to speed up irq handling in case
there is no port interrupt.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Martin Kepplinger [Thu, 19 Mar 2020 10:02:07 +0000 (11:02 +0100)]
usb: dwc3: support continuous runtime PM with dual role
The DRD module calls dwc3_set_mode() on role switches, i.e. when a device is
being plugged in. In order to support continuous runtime power management when
plugging in / unplugging a cable, we need to call pm_runtime_get_sync() in
this path.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
kbuild test robot [Fri, 27 Mar 2020 01:12:01 +0000 (09:12 +0800)]
usb: cdns3: mark local functions static
Mark all local functions static to fix sparse warnings.
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Nishad Kamdar [Sat, 28 Mar 2020 09:48:32 +0000 (15:18 +0530)]
USB: dwc2: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in
header files related to DesignWare USB2 DRD Core Support.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Nishad Kamdar [Sat, 28 Mar 2020 10:04:46 +0000 (15:34 +0530)]
USB: dwc3: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in
header files related to DesignWare USB3 DRD Core Support.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Nishad Kamdar [Sat, 28 Mar 2020 11:11:15 +0000 (16:41 +0530)]
USB: gadget: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in
header files related to USB peripheral controller drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Linus Torvalds [Sun, 3 May 2020 21:56:04 +0000 (14:56 -0700)]
Linux 5.7-rc4
Linus Torvalds [Sun, 3 May 2020 18:30:08 +0000 (11:30 -0700)]
Merge tag 'for-5.7-rc3-tag' of git://git./linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A few more stability fixes, minor build warning fixes and git url
fixup:
- fix partial loss of prealloc extent past i_size after fsync
- fix potential deadlock due to wrong transaction handle passing via
journal_info
- fix gcc 4.8 struct intialization warning
- update git URL in MAINTAINERS entry"
* tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
MAINTAINERS: btrfs: fix git repo URL
btrfs: fix gcc-4.8 build warning for struct initializer
btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info
btrfs: fix partial loss of prealloc extent past i_size after fsync
Linus Torvalds [Sun, 3 May 2020 18:04:57 +0000 (11:04 -0700)]
Merge tag 'iommu-fixes-v5.7-rc3' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Fix a memory leak when dev_iommu gets freed and a sub-pointer does
not
- Build dependency fixes for Mediatek, spapr_tce, and Intel IOMMU
driver
- Export iommu_group_get_for_dev() only for GPLed modules
- Fix AMD IOMMU interrupt remapping when x2apic is enabled
- Fix error path in the QCOM IOMMU driver probe function
* tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/qcom: Fix local_base status check
iommu: Properly export iommu_group_get_for_dev()
iommu/vt-d: Use right Kconfig option name
iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config
iommu/mediatek: Fix MTK_IOMMU dependencies
iommu: Fix the memory leak in dev_iommu_free()
Eric Biggers [Fri, 1 May 2020 23:44:17 +0000 (16:44 -0700)]
MAINTAINERS: btrfs: fix git repo URL
The git repo listed for btrfs hasn't been updated in over a year.
List the current one instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Sat, 2 May 2020 20:45:30 +0000 (13:45 -0700)]
Merge tag 'pm-5.7-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- prevent the intel_pstate driver from printing excessive diagnostic
messages in some cases (Chris Wilson)
- make the hibernation restore kernel freeze kernel threads as well as
user space tasks (Dexuan Cui)
- fix the ACPI device PM disagnostic messages to include the correct
power state name (Kai-Heng Feng).
* tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: ACPI: Output correct message on target power state
PM: hibernate: Freeze kernel threads in software_resume()
cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
Rafael J. Wysocki [Sat, 2 May 2020 19:39:17 +0000 (21:39 +0200)]
Merge branches 'pm-cpufreq' and 'pm-sleep'
* pm-cpufreq:
cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
* pm-sleep:
PM: hibernate: Freeze kernel threads in software_resume()
Linus Torvalds [Sat, 2 May 2020 18:31:12 +0000 (11:31 -0700)]
Merge tag 'iomap-5.7-fixes-1' of git://git./fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
"Hoist the check for an unrepresentable FIBMAP return value into
ioctl_fibmap.
The internal kernel function can handle 64-bit values (and is needed
to fix a regression on ext4 + jbd2). It is only the userspace ioctl
that is so old that it cannot deal"
* tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fibmap: Warn and return an error in case of block > INT_MAX
Linus Torvalds [Sat, 2 May 2020 18:24:01 +0000 (11:24 -0700)]
Merge tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- fix handling of backchannel binding in BIND_CONN_TO_SESSION
Bugfixes:
- Fix a credential use-after-free issue in pnfs_roc()
- Fix potential posix_acl refcnt leak in nfs3_set_acl
- defer slow parts of rpc_free_client() to a workqueue
- Fix an Oopsable race in __nfs_list_for_each_server()
- Fix trace point use-after-free race
- Regression: the RDMA client no longer responds to server disconnect
requests
- Fix return values of xdr_stream_encode_item_{present, absent}
- _pnfs_return_layout() must always wait for layoutreturn completion
Cleanups:
- Remove unreachable error conditions"
* tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a race in __nfs_list_for_each_server()
NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION
SUNRPC: defer slow parts of rpc_free_client() to a workqueue.
NFSv4: Remove unreachable error condition due to rpc_run_task()
SUNRPC: Remove unreachable error condition
xprtrdma: Fix use of xdr_stream_encode_item_{present, absent}
xprtrdma: Fix trace point use-after-free race
xprtrdma: Restore wake-up-all to rpcrdma_cm_event_handler()
nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl
NFS/pnfs: Fix a credential use-after-free issue in pnfs_roc()
NFS/pnfs: Ensure that _pnfs_return_layout() waits for layoutreturn completion
Linus Torvalds [Sat, 2 May 2020 18:16:14 +0000 (11:16 -0700)]
Merge tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Core:
- Documentation typo fixes
- fix the channel indexes
- dmatest: fixes for process hang and iterations
Drivers:
- hisilicon: build error fix without PCI_MSI
- ti-k3: deadlock fix
- uniphier-xdmac: fix for reg region
- pch: fix data race
- tegra: fix clock state"
* tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dmatest: Fix process hang when reading 'wait' parameter
dmaengine: dmatest: Fix iteration non-stop logic
dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization
dmaengine: fix channel index enumeration
dmaengine: mmp_tdma: Reset channel error on release
dmaengine: mmp_tdma: Do not ignore slave config validation errors
dmaengine: pch_dma.c: Avoid data race between probe and irq handler
dt-bindings: dma: uniphier-xdmac: switch to single reg region
include/linux/dmaengine: Typos fixes in API documentation
dmaengine: xilinx_dma: Add missing check for empty list
dmaengine: ti: k3-psil: fix deadlock on error path
dmaengine: hisilicon: Fix build error without PCI_MSI
Linus Torvalds [Sat, 2 May 2020 00:19:15 +0000 (17:19 -0700)]
Merge tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao)
- Fix a potential math overflow (Yan Zhao)
- Use follow_pfn() for calculating PFNMAPs (Sean Christopherson)
* tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()
vfio: avoid possible overflow in vfio_iommu_type1_pin_pages
vfio: checking of validity of user vaddr in vfio_dma_rw
Linus Torvalds [Sat, 2 May 2020 00:09:31 +0000 (17:09 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Add -fasynchronous-unwind-tables to the vDSO CFLAGS"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: vdso: Add -fasynchronous-unwind-tables to cflags
Linus Torvalds [Sat, 2 May 2020 00:03:06 +0000 (17:03 -0700)]
Merge tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fix for statx not grabbing the file table, making AT_EMPTY_PATH fail
- Cover a few cases where async poll can handle retry, eliminating the
need for an async thread
- fallback request busy/free fix (Bijan)
- syzbot reported SQPOLL thread exit fix for non-preempt (Xiaoguang)
- Fix extra put of req for sync_file_range (Pavel)
- Always punt splice async. We'll improve this for 5.8, but wanted to
eliminate the inode mutex lock from the non-blocking path for 5.7
(Pavel)
* tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
io_uring: punt splice async because of inode mutex
io_uring: check non-sync defer_list carefully
io_uring: fix extra put in sync_file_range()
io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()
io_uring: use proper references for fallback_req locking
io_uring: only force async punt if poll based retry can't handle it
io_uring: enable poll retry for any file with ->read_iter / ->write_iter
io_uring: statx must grab the file table for valid fd
Linus Torvalds [Fri, 1 May 2020 18:13:36 +0000 (11:13 -0700)]
Merge tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes for this release:
- NVMe pull request from Christoph, with a single fix for a double
free in the namespace error handling.
- Kill the bd_openers check in blk_drop_partitions(), fixing a
regression in this merge window (Christoph)"
* tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
block: remove the bd_openers checks in blk_drop_partitions
nvme: prevent double free in nvme_alloc_ns() error handling
Linus Torvalds [Fri, 1 May 2020 18:10:09 +0000 (11:10 -0700)]
Merge branch 'i2c/for-current-fixed' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Three driver bugfixes, and two reverts because the original patches
revealed underlying problems which the Tegra guys are now working on"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Avoid i2c interrupt status clear race condition.
i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"
Revert "i2c: tegra: Synchronize DMA before termination"
i2c: iproc: generate stop event for slave writes
Linus Torvalds [Fri, 1 May 2020 18:05:28 +0000 (11:05 -0700)]
Merge tag 'sound-5.7-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a collection of small fixes around this time:
- One more try for fixing PCM OSS regression
- HD-audio: a new quirk for Lenovo, the improved driver blacklisting,
a lock fix in the minor error path, and a fix for the possible race
at monitor notifiaction
- USB-audio: a quirk ID fix, a fix for POD HD500 workaround"
* tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
ALSA: opti9xx: shut up gcc-10 range warning
ALSA: hda/hdmi: fix without unlocked before return
ALSA: hda/hdmi: fix race in monitor detection during probe
ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
ALSA: line6: Fix POD HD500 audio playback
ALSA: pcm: oss: Place the plugin buffer overflow checks correctly (for 5.7)
ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
ALSA: hda: Match both PCI ID and SSID for driver blacklist
Linus Torvalds [Fri, 1 May 2020 18:01:51 +0000 (11:01 -0700)]
Merge tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular scheduled fixes for graphics. Nothing to extreme bunch of
amdgpu fixes, i915 and qxl fixes, along with some misc ones.
All seems to be progressing normally.
core:
- EDID off by one DTD fix
- DP mst write return code fix
dma-buf:
- fix SET_NAME ioctl uapi
- doc fixes
amdgpu:
- Fix a green screen on resume issue
- PM fixes for SR-IOV SDMA fix for navi
- Renoir display fixes
- Cursor and pageflip stuttering fixes
- Misc additional display fixes
- (uapi) Add additional DCC tiling flags for navi1x
i915:
- Fix selftest refcnt leak (Xiyu)
- Fix gem vma lock (Chris)
- Fix gt's i915_request.timeline acquire by checking if cacheline is
valid (Chris)
- Fix IRQ postinistall fault masks (Matt)
qxl:
- use after gree fix
- fix lost kunmap
- release leak fix
virtio:
- context destruction fix"
* tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm: (26 commits)
dma-buf: fix documentation build warnings
drm/qxl: qxl_release use after free
drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()
drm/i915: Use proper fault mask in interrupt postinstall too
drm/amd/display: Use cursor locking to prevent flip delays
drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1
drm/amd/display: Defer cursor update around VUPDATE for all ASIC
drm/amd/display: fix rn soc bb update
drm/amd/display: check if REFCLK_CNTL register is present
drm/amdgpu: bump version for invalidate L2 before SDMA IBs
drm/amdgpu: invalidate L2 before SDMA IBs (v2)
drm/amdgpu: add tiling flags from Mesa
drm/amd/powerplay: avoid using pm_en before it is initialized revised
Revert "drm/amd/powerplay: avoid using pm_en before it is initialized"
drm/qxl: qxl_release leak in qxl_hw_surface_alloc()
drm/qxl: qxl_release leak in qxl_draw_dirty_fb()
drm/virtio: only destroy created contexts
drm/dp_mst: Fix drm_dp_send_dpcd_write() return code
drm/i915/gt: Check cacheline is valid before acquiring
drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()
...
Linus Torvalds [Fri, 1 May 2020 18:00:07 +0000 (11:00 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four minor fixes: three in drivers and one in the core.
The core one allows an additional state change that fixes a regression
introduced by an update to the aacraid driver in the previous merge
window"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target/iblock: fix WRITE SAME zeroing
scsi: qla2xxx: check UNLOADING before posting async work
scsi: qla2xxx: set UNLOADING before waiting for session deletion
scsi: core: Allow the state change from SDEV_QUIESCE to SDEV_BLOCK
Pavel Begunkov [Fri, 1 May 2020 14:09:38 +0000 (17:09 +0300)]
io_uring: punt splice async because of inode mutex
Nonblocking do_splice() still may wait for some time on an inode mutex.
Let's play safe and always punt it async.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 1 May 2020 14:09:37 +0000 (17:09 +0300)]
io_uring: check non-sync defer_list carefully
io_req_defer() do double-checked locking. Use proper helpers for that,
i.e. list_empty_careful().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 1 May 2020 14:09:36 +0000 (17:09 +0300)]
io_uring: fix extra put in sync_file_range()
[ 40.179474] refcount_t: underflow; use-after-free.
[ 40.179499] WARNING: CPU: 6 PID: 1848 at lib/refcount.c:28 refcount_warn_saturate+0xae/0xf0
...
[ 40.179612] RIP: 0010:refcount_warn_saturate+0xae/0xf0
[ 40.179617] Code: 28 44 0a 01 01 e8 d7 01 c2 ff 0f 0b 5d c3 80 3d 15 44 0a 01 00 75 91 48 c7 c7 b8 f5 75 be c6 05 05 44 0a 01 01 e8 b7 01 c2 ff <0f> 0b 5d c3 80 3d f3 43 0a 01 00 0f 85 6d ff ff ff 48 c7 c7 10 f6
[ 40.179619] RSP: 0018:
ffffb252423ebe18 EFLAGS:
00010286
[ 40.179623] RAX:
0000000000000000 RBX:
ffff98d65e929400 RCX:
0000000000000000
[ 40.179625] RDX:
0000000000000001 RSI:
0000000000000086 RDI:
00000000ffffffff
[ 40.179627] RBP:
ffffb252423ebe18 R08:
0000000000000001 R09:
000000000000055d
[ 40.179629] R10:
0000000000000c8c R11:
0000000000000001 R12:
0000000000000000
[ 40.179631] R13:
ffff98d68c434400 R14:
ffff98d6a9cbaa20 R15:
ffff98d6a609ccb8
[ 40.179634] FS:
0000000000000000(0000) GS:
ffff98d6af580000(0000) knlGS:
0000000000000000
[ 40.179636] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 40.179638] CR2:
00000000033e3194 CR3:
000000006480a003 CR4:
00000000003606e0
[ 40.179641] Call Trace:
[ 40.179652] io_put_req+0x36/0x40
[ 40.179657] io_free_work+0x15/0x20
[ 40.179661] io_worker_handle_work+0x2f5/0x480
[ 40.179667] io_wqe_worker+0x2a9/0x360
[ 40.179674] ? _raw_spin_unlock_irqrestore+0x24/0x40
[ 40.179681] kthread+0x12c/0x170
[ 40.179685] ? io_worker_handle_work+0x480/0x480
[ 40.179690] ? kthread_park+0x90/0x90
[ 40.179695] ret_from_fork+0x35/0x40
[ 40.179702] ---[ end trace
85027405f00110aa ]---
Opcode handler must never put submission ref, but that's what
io_sync_file_range_finish() do. use io_steal_work() there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tang Bin [Sat, 18 Apr 2020 13:47:03 +0000 (21:47 +0800)]
iommu/qcom: Fix local_base status check
The function qcom_iommu_device_probe() does not perform sufficient
error checking after executing devm_ioremap_resource(), which can
result in crashes if a critical error path is encountered.
Fixes:
0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200418134703.1760-1-tangbin@cmss.chinamobile.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Greg Kroah-Hartman [Thu, 30 Apr 2020 12:01:20 +0000 (14:01 +0200)]
iommu: Properly export iommu_group_get_for_dev()
In commit
a7ba5c3d008d ("drivers/iommu: Export core IOMMU API symbols to
permit modular drivers") a bunch of iommu symbols were exported, all
with _GPL markings except iommu_group_get_for_dev(). That export should
also be _GPL like the others.
Fixes:
a7ba5c3d008d ("drivers/iommu: Export core IOMMU API symbols to permit modular drivers")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200430120120.2948448-1-gregkh@linuxfoundation.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Lu Baolu [Fri, 1 May 2020 07:24:27 +0000 (15:24 +0800)]
iommu/vt-d: Use right Kconfig option name
The CONFIG_ prefix should be added in the code.
Fixes:
046182525db61 ("iommu/vt-d: Add Kconfig option to enable/disable scalable mode")
Reported-and-tested-by: Kumar, Sanjay K <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200501072427.14265-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Suravee Suthikulpanit [Wed, 22 Apr 2020 13:30:02 +0000 (08:30 -0500)]
iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
Currently, system fails to boot because the legacy interrupt remapping
mode does not enable 128-bit IRTE (GA), which is required for x2APIC
support.
Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with
kernel option amd_iommu_intr=legacy instead. The initialization
logic will check GASup and automatically fallback to using
AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported.
Fixes:
3928aa3f5775 ("iommu/amd: Detect and enable guest vAPIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1587562202-14183-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Xiaoguang Wang [Fri, 1 May 2020 00:52:56 +0000 (08:52 +0800)]
io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()
While working on to make io_uring sqpoll mode support syscalls that need
struct files_struct, I got cpu soft lockup in io_ring_ctx_wait_and_kill(),
while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
cpu_relax();
above loop never has an chance to exit, it's because preempt isn't enabled
in the kernel, and the context calling io_ring_ctx_wait_and_kill() and
io_sq_thread() run in the same cpu, if io_sq_thread calls a cond_resched()
yield cpu and another context enters above loop, then io_sq_thread() will
always in runqueue and never exit.
Use cond_resched() can fix this issue.
Reported-by: syzbot+66243bb7126c410cefe6@syzkaller.appspotmail.com
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bijan Mottahedeh [Thu, 30 Apr 2020 00:47:50 +0000 (17:47 -0700)]
io_uring: use proper references for fallback_req locking
Use ctx->fallback_req address for test_and_set_bit_lock() and
clear_bit_unlock().
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 28 Apr 2020 19:16:53 +0000 (13:16 -0600)]
io_uring: only force async punt if poll based retry can't handle it
We do blocking retry from our poll handler, if the file supports polled
notifications. Only mark the request as needing an async worker if we
can't poll for it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 28 Apr 2020 19:15:06 +0000 (13:15 -0600)]
io_uring: enable poll retry for any file with ->read_iter / ->write_iter
We can have files like eventfd where it's perfectly fine to do poll
based retry on them, right now io_file_supports_async() doesn't take
that into account.
Pass in data direction and check the f_op instead of just always needing
an async worker.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dave Airlie [Fri, 1 May 2020 01:19:54 +0000 (11:19 +1000)]
Merge tag 'amd-drm-fixes-5.7-2020-04-29' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.7-2020-04-29:
amdgpu:
- Fix a green screen on resume issue
- PM fixes for SR-IOV
- SDMA fix for navi
- Renoir display fixes
- Cursor and pageflip stuttering fixes
- Misc additional display fixes
UAPI:
- Add additional DCC tiling flags for navi1x
Used by: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4697
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429212008.4306-1-alexander.deucher@amd.com
Dave Airlie [Fri, 1 May 2020 00:56:13 +0000 (10:56 +1000)]
Merge tag 'drm-intel-fixes-2020-04-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix selftest refcnt leak (Xiyu)
- Fix gem vma lock (Chris)
- Fix gt's i915_request.timeline acquire by checking if cacheline is valid (Chris)
- Fix IRQ postinistall fault masks (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430140042.GA270140@intel.com
Dave Airlie [Fri, 1 May 2020 00:41:59 +0000 (10:41 +1000)]
Merge tag 'drm-misc-fixes-2020-04-30' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A few resources-related fixes for qxl, some doc build warnings and ioctl
fixes for dma-buf, an off-by-one fix in edid, and a return code fix in
DP-MST
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430153201.wx6of2b2gsoip7bk@gilmour.lan
Linus Torvalds [Thu, 30 Apr 2020 23:45:08 +0000 (16:45 -0700)]
Merge tag 'for-5.7/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Document DM integrity allow_discard feature that was added during 5.7
merge window.
- Fix potential for DM writecache data corruption during DM table
reloads.
- Fix DM verity's FEC support's hash block number calculation in
verity_fec_decode().
- Fix bio-based DM multipath crash due to use of stale copy of
MPATHF_QUEUE_IO flag state in __map_bio().
* tag 'for-5.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm multipath: use updated MPATHF_QUEUE_IO on mapping for bio-based mpath
dm verity fec: fix hash block number in verity_fec_decode
dm writecache: fix data corruption when reloading the target
dm integrity: document allow_discard option
Linus Torvalds [Thu, 30 Apr 2020 23:35:45 +0000 (16:35 -0700)]
Merge tag 'selinux-pr-
20200430' of git://git./linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"Two more SELinux patches to fix problems in the v5.7-rcX releases.
Wei Yongjun's patch fixes a return code in an error path, and my patch
fixes a problem where we were not correctly applying access controls
to all of the netlink messages in the netlink_send LSM hook"
* tag 'selinux-pr-
20200430' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: properly handle multiple messages in selinux_netlink_send()
selinux: fix error return code in cond_read_list()
Linus Torvalds [Thu, 30 Apr 2020 23:32:47 +0000 (16:32 -0700)]
Merge tag 'linux-kselftest-kunit-5.7-rc4' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull Kunit fix from Shuah Khan:
"A single fix to flush the test summary to the console log without
delay"
* tag 'linux-kselftest-kunit-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Add missing newline in summary message
Linus Torvalds [Thu, 30 Apr 2020 23:28:49 +0000 (16:28 -0700)]
Merge tag 'linux-kselftest-5.7-rc4' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- ftrace test fixes to check for required filter files and kprobe args.
- Kselftest build/cross-build dependency check script to make it easier
for test ring admins/users to configure build systems correctly for
build/cross-build kselftests. Currently checks library dependencies.
- Checks if Kselftests can be built/cross-built on a system running
compile test on a trivial C file with LDLIBS specified for each
individual test in their Makefiles.
- Prints suggested target list for a system filtering out tests
failed the build dependency check from the TARGETS in Selftests
the main Makefile when optional -p is specified.
- Prints pass/fail dependency check for each tests/sub-test.
- Prints pass/fail targets and libraries.
- Default: runs dependency checks on all tests.
- Optional test name can be specified to check dependencies for it.
* tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Check the first record for kprobe_args_type.tc
selftests: add build/cross-build dependency check script
selftests/ftrace: Check required filter files before running test
Paul Moore [Tue, 28 Apr 2020 13:59:02 +0000 (09:59 -0400)]
selinux: properly handle multiple messages in selinux_netlink_send()
Fix the SELinux netlink_send hook to properly handle multiple netlink
messages in a single sk_buff; each message is parsed and subject to
SELinux access control. Prior to this patch, SELinux only inspected
the first message in the sk_buff.
Cc: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Trond Myklebust [Thu, 30 Apr 2020 19:08:26 +0000 (15:08 -0400)]
NFS: Fix a race in __nfs_list_for_each_server()
The struct nfs_server gets put on the cl_superblocks list before
the server->super field has been initialised, in which case the
call to nfs_sb_active() will Oops. Add a check to ensure that
we skip such a list entry.
Fixes:
3c9e502b59fb ("NFS: Add a helper nfs_client_for_each_server()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Linus Torvalds [Thu, 30 Apr 2020 17:38:48 +0000 (10:38 -0700)]
Merge tag 'mmc-v5.7-rc2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- meson-mx-sdio: Fix support for HW busy detection
- sdhci-msm: Fix support for HW busy detection
- cqhci: Fix polling loop by converting to readx_poll_timeout()
- sdhci-xenon: Fix annoying 1.8V regulator warning
- sdhci-pci: Fix eMMC driver strength for BYT-based controllers
* tag 'mmc-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers
mmc: sdhci-xenon: fix annoying 1.8V regulator warning
mmc: sdhci-msm: Enable host capabilities pertains to R1b response
mmc: cqhci: Avoid false "cqhci: CQE stuck on" by not open-coding timeout loop
mmc: meson-mx-sdio: remove the broken ->card_busy() op
mmc: meson-mx-sdio: Set MMC_CAP_WAIT_WHILE_BUSY
mmc: core: make mmc_interrupt_hpi() static
Vincenzo Frascino [Wed, 29 Apr 2020 15:10:50 +0000 (16:10 +0100)]
arm64: vdso: Add -fasynchronous-unwind-tables to cflags
On arm64 linux gcc uses -fasynchronous-unwind-tables -funwind-tables
by default since gcc-8, so now the de facto platform ABI is to allow
unwinding from async signal handlers.
However on bare metal targets (aarch64-none-elf), and on old gcc,
async and sync unwind tables are not enabled by default to avoid
runtime memory costs.
This means if linux is built with a baremetal toolchain the vdso.so
may not have unwind tables which breaks the gcc platform ABI guarantee
in userspace.
Add -fasynchronous-unwind-tables explicitly to the vgettimeofday.o
cflags to address the ABI change.
Fixes:
28b1a824a4f4 ("arm64: vdso: Substitute gettimeofday() with C implementation")
Cc: Will Deacon <will@kernel.org>
Reported-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Christoph Hellwig [Tue, 28 Apr 2020 08:52:03 +0000 (10:52 +0200)]
block: remove the bd_openers checks in blk_drop_partitions
When replacing the bd_super check with a bd_openers I followed a logical
conclusion, which turns out to be utterly wrong. When a block device has
bd_super sets it has a mount file system on it (although not every
mounted file system sets bd_super), but that also implies it doesn't even
have partitions to start with.
So instead of trying to come up with a logical check for all openers,
just remove the check entirely.
Fixes:
d3ef5536274f ("block: fix busy device checking in blk_drop_partitions")
Fixes:
cb6b771b05c3 ("block: fix busy device checking in blk_drop_partitions again")
Reported-by: Michal Koutný <mkoutny@suse.com>
Reported-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 30 Apr 2020 15:32:48 +0000 (09:32 -0600)]
Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7
Pull NVMe fix from Christoph.
* 'nvme-5.7' of git://git.infradead.org/nvme:
nvme: prevent double free in nvme_alloc_ns() error handling
Ritesh Harjani [Thu, 30 Apr 2020 14:57:46 +0000 (07:57 -0700)]
fibmap: Warn and return an error in case of block > INT_MAX
We better warn the fibmap user and not return a truncated and therefore
an incorrect block map address if the bmap() returned block address
is greater than INT_MAX (since user supplied integer pointer).
It's better to pr_warn() all user of ioctl_fibmap() and return a proper
error code rather than silently letting a FS corruption happen if the
user tries to fiddle around with the returned block map address.
We fix this by returning an error code of -ERANGE and returning 0 as the
block mapping address in case if it is > INT_MAX.
Now iomap_bmap() could be called from either of these two paths.
Either when a user is calling an ioctl_fibmap() interface to get
the block mapping address or by some filesystem via use of bmap()
internal kernel API.
bmap() kernel API is well equipped with handling of u64 addresses.
WARN condition in iomap_bmap_actor() was mainly added to warn all
the fibmap users. But now that we have directly added this warning
for all fibmap users and also made sure to return 0 as block map address
in case if addr > INT_MAX.
So we can now remove this logic from iomap_bmap_actor().
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Randy Dunlap [Wed, 8 Apr 2020 04:20:34 +0000 (21:20 -0700)]
dma-buf: fix documentation build warnings
Fix documentation warnings in dma-buf.[hc]:
../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach'
../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach'
../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format: * @move_notify
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7bcbe6fe-0b4b-87da-d003-b68a26eb4cf0@infradead.org
ryan_chen [Wed, 29 Apr 2020 03:37:37 +0000 (11:37 +0800)]
i2c: aspeed: Avoid i2c interrupt status clear race condition.
In AST2600 there have a slow peripheral bus between CPU and i2c
controller. Therefore GIC i2c interrupt status clear have delay timing,
when CPU issue write clear i2c controller interrupt status. To avoid
this issue, the driver need have read after write clear at i2c ISR.
Fixes:
f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C")
Signed-off-by: ryan_chen <ryan_chen@aspeedtech.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[wsa: added Fixes tag]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Dan Carpenter [Tue, 10 Sep 2019 13:42:42 +0000 (16:42 +0300)]
i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
The problem is that we dereference "privdata->pci_dev" when we print
the error messages in amd_mp2_pci_init():
dev_err(ndev_dev(privdata), "Failed to enable MP2 PCI device\n");
^^^^^^^^^^^^^^^^^
Fixes:
529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Takashi Iwai [Thu, 30 Apr 2020 12:47:55 +0000 (14:47 +0200)]
ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
The USB vendor ID of NuPrime DAC-10 is not 16b0 but 16d0.
Fixes:
f656891c6619 ("ALSA: usb-audio: add more quirks for DSD interfaces")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200430124755.15940-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Arnd Bergmann [Wed, 29 Apr 2020 13:27:32 +0000 (15:27 +0200)]
btrfs: fix gcc-4.8 build warning for struct initializer
Some older compilers like gcc-4.8 warn about mismatched curly braces in
a initializer:
fs/btrfs/backref.c: In function 'is_shared_data_backref':
fs/btrfs/backref.c:394:9: error: missing braces around
initializer [-Werror=missing-braces]
struct prelim_ref target = {0};
^
fs/btrfs/backref.c:394:9: error: (near initialization for
'target.rbnode') [-Werror=missing-braces]
Use the GNU empty initializer extension to avoid this.
Fixes:
ed58f2e66e84 ("btrfs: backref, don't add refs from shared block when resolving normal backref")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Arnd Bergmann [Wed, 29 Apr 2020 19:02:03 +0000 (21:02 +0200)]
ALSA: opti9xx: shut up gcc-10 range warning
gcc-10 points out a few instances of suspicious integer arithmetic
leading to value truncation:
sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure':
sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
322 | (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask'
351 | snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
| ^~~~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c: In function 'snd_miro_configure':
sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
873 | (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask'
1010 | snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
| ^~~~~~~~~~~~~~~~~~~
These are all harmless here as only the low 8 bit are passed down
anyway. Change the macros to inline functions to make the code
more readable and also avoid the warning.
Strictly speaking those functions also need locking to make the
read/write pair atomic, but it seems unlikely that anyone would
still run into that issue.
Fixes:
1841f613fd2e ("[ALSA] Add snd-miro driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200429190216.85919-1-arnd@arndb.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>