OSDN Git Service
Gregory CLEMENT [Thu, 1 Dec 2016 17:03:04 +0000 (18:03 +0100)]
net: mvneta: Optimize rx path for small frame
For small frame reuse the phys_addr variable instead of accessing the
uncacheable value in the rx descriptor.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 2 Dec 2016 18:46:21 +0000 (13:46 -0500)]
Merge branch 'bpf-support-for-sockets'
David Ahern says:
====================
net: Add bpf support for sockets
The recently added VRF support in Linux leverages the bind-to-device
API for programs to specify an L3 domain for a socket. While
SO_BINDTODEVICE has been around for ages, not every ipv4/ipv6 capable
program has support for it. Even for those programs that do support it,
the API requires processes to be started as root (CAP_NET_RAW) which
is not desirable from a general security perspective.
This patch set leverages Daniel Mack's work to attach bpf programs to
a cgroup to provide a capability to set sk_bound_dev_if for all
AF_INET{6} sockets opened by a process in a cgroup when the sockets
are allocated.
For example:
1. configure vrf (e.g., using ifupdown2)
auto eth0
iface eth0 inet dhcp
vrf mgmt
auto mgmt
iface mgmt
vrf-table auto
2. configure cgroup
mount -t cgroup2 none /tmp/cgroupv2
mkdir /tmp/cgroupv2/mgmt
test_cgrp2_sock /tmp/cgroupv2/mgmt 15
3. set shell into cgroup (e.g., can be done at login using pam)
echo $$ >> /tmp/cgroupv2/mgmt/cgroup.procs
At this point all commands run in the shell (e.g, apt) have sockets
automatically bound to the VRF (see output of ss -ap 'dev == <vrf>'),
including processes not running as root.
This capability enables running any program in a VRF context and is key
to deploying Management VRF, a fundamental configuration for networking
gear, with any Linux OS installation.
This patchset also exports the socket family, type and protocol as
read-only allowing bpf filters to deny a process in a cgroup the ability
to open specific types of AF_INET or AF_INET6 sockets.
v7
- comments from Alexei
v6
- add export of socket family, type and protocol
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 1 Dec 2016 16:48:08 +0000 (08:48 -0800)]
samples/bpf: add userspace example for prohibiting sockets
Add examples preventing a process in a cgroup from opening a socket
based family, protocol and type.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 1 Dec 2016 16:48:07 +0000 (08:48 -0800)]
samples/bpf: Update bpf loader for cgroup section names
Add support for section names starting with cgroup/skb and cgroup/sock.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 1 Dec 2016 16:48:06 +0000 (08:48 -0800)]
bpf: Add support for reading socket family, type, protocol
Add socket family, type and protocol to bpf_sock allowing bpf programs
read-only access.
Add __sk_flags_offset[0] to struct sock before the bitfield to
programmtically determine the offset of the unsigned int containing
protocol and type.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 1 Dec 2016 16:48:05 +0000 (08:48 -0800)]
samples: bpf: add userspace example for modifying sk_bound_dev_if
Add a simple program to demonstrate the ability to attach a bpf program
to a cgroup that sets sk_bound_dev_if for AF_INET{6} sockets when they
are created.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 1 Dec 2016 16:48:04 +0000 (08:48 -0800)]
bpf: Add new cgroup attach type to enable sock modifications
Add new cgroup based program type, BPF_PROG_TYPE_CGROUP_SOCK. Similar to
BPF_PROG_TYPE_CGROUP_SKB programs can be attached to a cgroup and run
any time a process in the cgroup opens an AF_INET or AF_INET6 socket.
Currently only sk_bound_dev_if is exported to userspace for modification
by a bpf program.
This allows a cgroup to be configured such that AF_INET{6} sockets opened
by processes are automatically bound to a specific device. In turn, this
enables the running of programs that do not support SO_BINDTODEVICE in a
specific VRF context / L3 domain.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 1 Dec 2016 16:48:03 +0000 (08:48 -0800)]
bpf: Refactor cgroups code in prep for new type
Code move and rename only; no functional change intended.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 1 Dec 2016 13:02:06 +0000 (05:02 -0800)]
mlx4: fix use-after-free in mlx4_en_fold_software_stats()
My recent commit to get more precise rx/tx counters in ndo_get_stats64()
can lead to crashes at device dismantle, as Jesper found out.
We must prevent mlx4_en_fold_software_stats() trying to access
tx/rx rings if they are deleted.
Fix this by adding a test against priv->port_up in
mlx4_en_fold_software_stats()
Calling mlx4_en_fold_software_stats() from mlx4_en_stop_port()
allows us to eventually broadcast the latest/current counters to
rtnetlink monitors.
Fixes:
40931b85113d ("mlx4: give precise rx/tx bytes/packets counters")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-and-bisected-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@dev.mellanox.co.il>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Thu, 1 Dec 2016 12:54:28 +0000 (18:24 +0530)]
net: thunderx: Fix transmit queue timeout issue
Transmit queue timeout issue is seen in two cases
- Due to a race condition btw setting stop_queue at xmit()
and checking for stopped_queue in NAPI poll routine, at times
transmission from a SQ comes to a halt. This is fixed
by using barriers and also added a check for SQ free descriptors,
incase SQ is stopped and there are only CQE_RX i.e no CQE_TX.
- Contrary to an assumption, a HW errata where HW doesn't stop transmission
even though there are not enough CQEs available for a CQE_TX is
not fixed in T88 pass 2.x. This results in a Qset error with
'CQ_WR_FULL' stalling transmission. This is fixed by adjusting
RXQ's RED levels for CQ level such that there is always enough
space left for CQE_TXs.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 2 Dec 2016 18:28:38 +0000 (13:28 -0500)]
Merge branch 'offloading-tc-rules-hw'
Hadar Hen Zion says:
====================
Offloading tc rules using underline Hardware device
This series adds flower classifier support in offloading tc rules when the
Software ingress device is different from the Hardware ingress device,
such as when dealing with IP tunnels
The first two patches are a small fixes to flower, checking the skip_hw flag
wasn't set before calling the Hardware offloading functions which will try to
offload the rule.
The next two patches are infrastructure patches, a preparation for the fourth
patch which is adding support in flower to offload rules when the ingress
device is not a Hardware device and therefore can't offload.
In this case ndo_setup_tc is called with the mirred (egress) device.
The last three patchs are adding mlx5e support to offload rules using the new
"egress_device" flag.
Thanks,
Hadar
Changes from v0:
- check if CONFIG_NET_CLS_ACT is defined befor calling tc_action_ops get_dev()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Thu, 1 Dec 2016 12:06:40 +0000 (14:06 +0200)]
net/mlx5e: Support adding ingress tc rule when egress device flag is set
When ndo_setup_tc is called with an egress_dev flag set, it means that
the ndo call was executed on the mirred action (egress) device and not
on the ingress device.
In order to support this kind of ndo_setup_tc call, and insert the
correct decap rule to the hardware, the uplink device on the same eswitch
should be found.
Currently, we use this resolution between the mirred device and the
uplink on the same eswitch to offload vxlan shared device decap rules.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Thu, 1 Dec 2016 12:06:39 +0000 (14:06 +0200)]
net/mlx5e: Save the represntor netdevice as part of the representor
Replace the representor private data to a net_device pointer holding the
representor netdevice, instead of void pointer holding mlx5e_priv.
It will be used by a new eswitch service function, returning the uplink representor
netdevice.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Thu, 1 Dec 2016 12:06:38 +0000 (14:06 +0200)]
net/mlx5e: Bring back representor's ndos that were accidentally removed
The VF Representor udp tunnel ndo entries were removed by mistake,
return them.
Fixes:
370bad0f9a52 ('net/mlx5e: Support HW (offloaded) and SW counters for SRIOV switchdev mode')
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Thu, 1 Dec 2016 12:06:37 +0000 (14:06 +0200)]
net/sched: cls_flower: Add offload support using egress Hardware device
In order to support hardware offloading when the device given by the tc
rule is different from the Hardware underline device, extract the mirred
(egress) device from the tc action when a filter is added, using the new
tc_action_ops, get_dev().
Flower caches the information about the mirred device and use it for
calling ndo_setup_tc in filter change, update stats and delete.
Calling ndo_setup_tc of the mirred (egress) device instead of the
ingress device will allow a resolution between the software ingress
device and the underline hardware device.
The resolution will take place inside the offloading driver using
'egress_device' flag added to tc_to_netdev struct which is provided to
the offloading driver.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Thu, 1 Dec 2016 12:06:36 +0000 (14:06 +0200)]
net/sched: act_mirred: Add new tc_action_ops get_dev()
Adding support to a new tc_action_ops.
get_dev is a general option which allows to get the underline
device when trying to offload a tc rule.
In case of mirred action the returned device is the mirred (egress)
device.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Thu, 1 Dec 2016 12:06:35 +0000 (14:06 +0200)]
net/sched: cls_flower: Provide a filter to replace/destroy hardware filter functions
Instead of providing many arguments to fl_hw_{replace/destroy}_filter
functions, just provide cls_fl_filter struct that includes all the relevant
args.
This patches doesn't add any new functionality.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Thu, 1 Dec 2016 12:06:34 +0000 (14:06 +0200)]
net/sched: cls_flower: Try to offload only if skip_hw flag isn't set
Check skip_hw flag isn't set before calling
fl_hw_{replace/destroy}_filter and fl_hw_update_stats functions.
Replace the call to tc_should_offload with tc_can_offload.
tc_can_offload only checks if the device supports offloading, the check for
skip_hw flag is done earlier in the flow.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Thu, 1 Dec 2016 12:06:33 +0000 (14:06 +0200)]
net/sched: Add separate check for skip_hw flag
Creating a difference between two possible cases:
1. Not offloading tc rule since the user sets 'skip_hw' flag.
2. Not offloading tc rule since the device doesn't support offloading.
This patch doesn't add any new functionality.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Thu, 1 Dec 2016 10:32:07 +0000 (11:32 +0100)]
tcp: allow to turn tcp timestamp randomization off
Eric says: "By looking at tcpdump, and TS val of xmit packets of multiple
flows, we can deduct the relative qdisc delays (think of fq pacing).
This should work even if we have one flow per remote peer."
Having random per flow (or host) offsets doesn't allow that anymore so add
a way to turn this off.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Thu, 1 Dec 2016 10:32:06 +0000 (11:32 +0100)]
tcp: randomize tcp timestamp offsets for each connection
jiffies based timestamps allow for easy inference of number of devices
behind NAT translators and also makes tracking of hosts simpler.
commit
ceaa1fef65a7c2e ("tcp: adding a per-socket timestamp offset")
added the main infrastructure that is needed for per-connection ts
randomization, in particular writing/reading the on-wire tcp header
format takes the offset into account so rest of stack can use normal
tcp_time_stamp (jiffies).
So only two items are left:
- add a tsoffset for request sockets
- extend the tcp isn generator to also return another 32bit number
in addition to the ISN.
Re-use of ISN generator also means timestamps are still monotonically
increasing for same connection quadruple, i.e. PAWS will still work.
Includes fixes from Eric Dumazet.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 2 Dec 2016 17:44:38 +0000 (12:44 -0500)]
Merge branch 'qed-iscsi'
Manish Rangankar says:
====================
Add QLogic FastLinQ iSCSI (qedi) driver.
This series introduces hardware offload iSCSI initiator driver for the
41000 Series Converged Network Adapters (579xx chip) by Qlogic. The overall
driver design includes a common module ('qed') and protocol specific
dependent modules ('qedi' for iSCSI).
This is an open iSCSI driver, modifications to open iSCSI user components
'iscsid', 'iscsiuio', etc. are required for the solution to work. The user
space changes are also in the process of being submitted.
https://groups.google.com/forum/#!forum/open-iscsi
The 'qed' common module, under drivers/net/ethernet/qlogic/qed/, is
enhanced with functionality required for the iSCSI support. This series
is based on:
net tree base: Merge of net and net-next as of 11/29/2016
Changes from RFC v2:
1. qedi patches are squashed into single patch to prevent krobot
warning.
2. Fixed 'hw_p_cpuq' incompatible pointer type.
3. Fixed sparse incompatible types in comparison expression.
4. Misc fixes with latest 'checkpatch --strict' option.
5. Remove int_mode option from MODULE_PARAM.
6. Prefix all MODULE_PARAM params with qedi_*.
7. Use CONFIG_QED_ISCSI instead of CONFIG_QEDI
8. Added bad task mem access fix.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Thu, 1 Dec 2016 08:21:07 +0000 (00:21 -0800)]
qed: Add iSCSI out of order packet handling.
This patch adds out of order packet handling for hardware offloaded
iSCSI. Out of order packet handling requires driver buffer allocation
and assistance.
Signed-off-by: Arun Easi <arun.easi@cavium.com>
Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Thu, 1 Dec 2016 08:21:06 +0000 (00:21 -0800)]
qed: Add support for hardware offloaded iSCSI.
This adds the backbone required for the various HW initalizations
which are necessary for the iSCSI driver (qedi) for QLogic FastLinQ
4xxxx line of adapters - FW notification, resource initializations, etc.
Signed-off-by: Arun Easi <arun.easi@cavium.com>
Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasmus Villemoes [Wed, 30 Nov 2016 22:02:54 +0000 (23:02 +0100)]
net: atarilance: use %8ph for printing hex string
This is already using the %pM printf extension; might as well also use
%ph to make the code smaller.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 30 Nov 2016 21:05:39 +0000 (22:05 +0100)]
net/mlx5e: skip loopback selftest with !CONFIG_INET
When CONFIG_INET is disabled, the new selftest results in a link
error:
drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.o: In function `mlx5e_test_loopback':
en_selftest.c:(.text.mlx5e_test_loopback+0x2ec): undefined reference to `ip_send_check'
en_selftest.c:(.text.mlx5e_test_loopback+0x34c): undefined reference to `udp4_hwcsum'
This hides the specific test in that configuration.
Fixes:
0952da791c97 ("net/mlx5e: Add support for loopback selftest")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 30 Nov 2016 21:16:06 +0000 (22:16 +0100)]
bpf, xdp: drop rcu_read_lock from bpf_prog_run_xdp and move to caller
After
326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"),
the rcu_read_lock() in bpf_prog_run_xdp() is superfluous, since callers
need to hold rcu_read_lock() already to make sure BPF program doesn't
get released in the background.
Thus, drop it from bpf_prog_run_xdp(), as it can otherwise be misleading.
Still keeping the bpf_prog_run_xdp() is useful as it allows for grepping
in XDP supported drivers and to keep the typecheck on the context intact.
For mlx4, this means we don't have a double rcu_read_lock() anymore. nfp can
just make use of bpf_prog_run_xdp(), too. For qede, just move rcu_read_lock()
out of the helper. When the driver gets atomic replace support, this will
move to call-sites eventually.
mlx5 needs actual fixing as it has the same issue as described already in
326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"),
that is, we're under RCU bh at this time, BPF programs are released via
call_rcu(), and call_rcu() != call_rcu_bh(), so we need to properly mark
read side as programs can get xchg()'ed in mlx5e_xdp_set() without queue
reset.
Fixes:
86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Soheil Hassas Yeganeh [Wed, 30 Nov 2016 19:01:08 +0000 (14:01 -0500)]
sock: reset sk_err for ICMP packets read from error queue
Only when ICMP packets are enqueued onto the error queue,
sk_err is also set. Before
f5f99309fa74 (sock: do not set sk_err
in sock_dequeue_err_skb), a subsequent error queue read
would set sk_err to the next error on the queue, or 0 if empty.
As no error types other than ICMP set this field, sk_err should
not be modified upon dequeuing them.
Only for ICMP errors, reset the (racy) sk_err. Some applications,
like traceroute, rely on it and go into a futile busy POLLERR
loop otherwise.
In principle, sk_err has to be set while an ICMP error is queued.
Testing is_icmp_err_skb(skb_next) approximates this without
requiring a full queue walk. Applications that receive both ICMP
and other errors cannot rely on this legacy behavior, as other
errors do not set sk_err in the first place.
Fixes:
f5f99309fa74 (sock: do not set sk_err in sock_dequeue_err_skb)
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 2 Dec 2016 15:52:05 +0000 (10:52 -0500)]
Merge branch 'lwt-bpf'
Thomas Graf says:
====================
bpf: BPF for lightweight tunnel encapsulation
This series implements BPF program invocation from dst entries via the
lightweight tunnels infrastructure. The BPF program can be attached to
lwtunnel_input(), lwtunnel_output() or lwtunnel_xmit() and see an L3
skb as context. Programs attached to input and output are read-only.
Programs attached to lwtunnel_xmit() can modify and redirect, push headers
and redirect packets.
The facility can be used to:
- Collect statistics and generate sampling data for a subset of traffic
based on the dst utilized by the packet thus allowing to extend the
existing realms.
- Apply additional per route/dst filters to prohibit certain outgoing
or incoming packets based on BPF filters. In particular, this allows
to maintain per dst custom state across multiple packets in BPF maps
and apply filters based on statistics and behaviour observed over time.
- Attachment of L2 headers at transmit where resolving the L2 address
is not required.
- Possibly many more.
v3 -> v4:
- Bumped LWT_BPF_MAX_HEADROOM from 128 to 256 (Alexei)
- Renamed bpf_skb_push() helper to bpf_skb_change_head() to relate to
existing bpf_skb_change_tail() helper (Alexei/Daniel)
- Added check in __bpf_redirect_common() to verify that program added a
link header before redirecting to a l2 device. Adding the check to
lwt-bpf code was considered but dropped due to massive code required
due to retrieval of net_device via per-cpu redirect buffer. A test
case was added to cover the scenario when a program directs to an l2
device without adding an appropriate l2 header.
(Alexei)
- Prohibited access to tc_classid (Daniel)
- Collapsed bpf_verifier_ops instance for lwt in/out as they are
identical (Daniel)
- Some cosmetic changes
v2 -> v3:
- Added real world sample lwt_len_hist_kern.c which demonstrates how to
collect a histogram on packet sizes for all packets flowing through
a number of routes.
- Restricted output to be read-only. Since the header can no longer
be modified, the rerouting functionality has been removed again.
- Added test case which cover destructive modification of packet data.
v1 -> v2:
- Added new BPF_LWT_REROUTE return code for program to indicate
that new route lookup should be performed. Suggested by Tom.
- New sample to illustrate rerouting
- New patch 05: Recursion limit for lwtunnel_output for the case
when user creates circular dst redirection. Also resolves the
issue for ILA.
- Fix to ensure headroom for potential future L2 header is still
guaranteed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Wed, 30 Nov 2016 16:10:11 +0000 (17:10 +0100)]
bpf: Add tests and samples for LWT-BPF
Adds a series of tests to verify the functionality of attaching
BPF programs at LWT hooks.
Also adds a sample which collects a histogram of packet sizes which
pass through an LWT hook.
$ ./lwt_len_hist.sh
Starting netserver with host 'IN(6)ADDR_ANY' port '12865' and family AF_UNSPEC
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.253.2 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 10.00 39857.69
1 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 22 | |
64 -> 127 : 98 | |
128 -> 255 : 213 | |
256 -> 511 :
1444251 |******** |
512 -> 1023 : 660610 |*** |
1024 -> 2047 : 535241 |** |
2048 -> 4095 : 19 | |
4096 -> 8191 : 180 | |
8192 -> 16383 :
5578023 |************************************* |
16384 -> 32767 : 632099 |*** |
32768 -> 65535 : 6575 | |
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Wed, 30 Nov 2016 16:10:10 +0000 (17:10 +0100)]
bpf: BPF for lightweight tunnel infrastructure
Registers new BPF program types which correspond to the LWT hooks:
- BPF_PROG_TYPE_LWT_IN => dst_input()
- BPF_PROG_TYPE_LWT_OUT => dst_output()
- BPF_PROG_TYPE_LWT_XMIT => lwtunnel_xmit()
The separate program types are required to differentiate between the
capabilities each LWT hook allows:
* Programs attached to dst_input() or dst_output() are restricted and
may only read the data of an skb. This prevent modification and
possible invalidation of already validated packet headers on receive
and the construction of illegal headers while the IP headers are
still being assembled.
* Programs attached to lwtunnel_xmit() are allowed to modify packet
content as well as prepending an L2 header via a newly introduced
helper bpf_skb_change_head(). This is safe as lwtunnel_xmit() is
invoked after the IP header has been assembled completely.
All BPF programs receive an skb with L3 headers attached and may return
one of the following error codes:
BPF_OK - Continue routing as per nexthop
BPF_DROP - Drop skb and return EPERM
BPF_REDIRECT - Redirect skb to device as per redirect() helper.
(Only valid in lwtunnel_xmit() context)
The return codes are binary compatible with their TC_ACT_
relatives to ease compatibility.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Wed, 30 Nov 2016 16:10:09 +0000 (17:10 +0100)]
route: Set lwtstate for local traffic and cached input dsts
A route on the output path hitting a RTN_LOCAL route will keep the dst
associated on its way through the loopback device. On the receive path,
the dst_input() call will thus invoke the input handler of the route
created in the output path. Thus, lwt redirection for input must be done
for dsts allocated in the otuput path as well.
Also, if a route is cached in the input path, the allocated dst should
respect lwtunnel configuration on the nexthop as well.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Wed, 30 Nov 2016 16:10:08 +0000 (17:10 +0100)]
route: Set orig_output when redirecting to lwt on locally generated traffic
orig_output for IPv4 was only set for dsts which hit an input route.
Set it consistently for locally generated traffic as well to allow
lwt to continue the dst_output() path as configured by the nexthop.
Fixes:
2536862311d ("lwt: Add support to redirect dst.input")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 2 Dec 2016 15:47:03 +0000 (10:47 -0500)]
Merge branch 'mlx5-updates'
Saeed Mahameed says:
====================
Mellanox 100G mlx5 updates 2016-11-29
The following series from Tariq and Roi, provides some critical fixes
and updates for the mlx5e driver.
From Tariq:
- Fix driver coherent memory huge allocation issues by fragmenting
completion queues, in a way that is transparent to the netdev driver by
providing a new buffer type "mlx5_frag_buf" with the same access API.
- Create UMR MKey per RQ to have better scalability.
From Roi:
- Some fixes for the encap-decap support and tc flower added lately to the
mlx5e driver.
v1->v2:
- Fix start index in error flow of mlx5_frag_buf_alloc_node, pointed out by Eric.
This series was generated against commit:
31ac1c19455f ("geneve: fix ip_hdr_len reserved for geneve6 tunnel.")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Roi Dayan [Wed, 30 Nov 2016 15:59:43 +0000 (17:59 +0200)]
net/mlx5e: Remove flow encap entry in the correct place
Handling flow encap entry should be inside tc del flow
and is only relevant for offloaded eswitch TC rules.
Fixes:
11a457e9b6c1 ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roi Dayan [Wed, 30 Nov 2016 15:59:42 +0000 (17:59 +0200)]
net/mlx5e: Refactor tc del flow to accept mlx5e_tc_flow instance
Change the function that deletes offloaded TC rule to get
struct mlx5e_tc_flow instance which contains both the flow
handle and flow attributes. This is a cleanup needed for
downstream patches, it doesn't change any functionality.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roi Dayan [Wed, 30 Nov 2016 15:59:41 +0000 (17:59 +0200)]
net/mlx5e: Correct cleanup order when deleting offloaded TC rules
According to the reverse unwinding principle, on delete time we should
first handle deletion of the steering rule and later handle the vlan
deletion from the eswitch.
Fixes:
8b32580df1cb ("net/mlx5e: Add TC vlan action for SRIOV offloads")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roi Dayan [Wed, 30 Nov 2016 15:59:40 +0000 (17:59 +0200)]
net/mlx5e: Remove redundant hashtable lookup in configure flower
We will never find a flow with the same cookie as cls_flower always
allocates a new flow and the cookie is the allocated memory address.
Fixes:
e3a2b7ed018e ("net/mlx5e: Support offload cls_flower with drop action")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Wed, 30 Nov 2016 15:59:39 +0000 (17:59 +0200)]
net/mlx5e: Create UMR MKey per RQ
In Striding RQ implementation, we used a single UMR
(User-Mode Memory Registration) memory key for all RQs.
When the product of RQs number*size gets high, we hit a
limitation of u16 field size in FW.
Here we move to using a UMR memory key per RQ, so we can
scale to any number of rings, with the maximum buffer
size in each.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Wed, 30 Nov 2016 15:59:38 +0000 (17:59 +0200)]
net/mlx5e: Move function mlx5e_create_umr_mkey
In next patch we are going to create a UMR MKey per RQ, we need
mlx5e_create_umr_mkey declared before mlx5e_create_rq.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Wed, 30 Nov 2016 15:59:37 +0000 (17:59 +0200)]
net/mlx5e: Implement Fragmented Work Queue (WQ)
Add new type of struct mlx5_frag_buf which is used to allocate fragmented
buffers rather than contiguous, and make the Completion Queues (CQs) use
it as they are big (default of 2MB per CQ in Striding RQ).
This fixes the failures of type:
"mlx5e_open_locked: mlx5e_open_channels failed, -12"
due to dma_zalloc_coherent insufficient contiguous coherent memory to
satisfy the driver's request when the user tries to setup more or larger
rings.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 2 Dec 2016 15:36:48 +0000 (10:36 -0500)]
Merge branch 'altera-tse-sgmii-pcs'
Neill Whillans says:
====================
net: Add support for SGMII PCS on Altera TSE MAC
These patches were created as part of work to add support for SGMII
PCS functionality to the Altera TSE MAC. Patches are based on 4.9-rc6
git tree.
The first patch in the series adds support for the VSC8572 dual-port
Gigabit Ethernet transceiver, used in integration testing.
The second patch adds support for the SGMII PCS functionality to the
Altera TSE driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Neill Whillans [Wed, 30 Nov 2016 13:41:05 +0000 (13:41 +0000)]
net: ethernet: altera_tse: add support for SGMII PCS
Add support for the (optional) SGMII PCS functionality of the Altera
TSE MAC. If the phy-mode is set to 'sgmii' then we attempt to discover
and initialise the PCS so that the MAC can communicate to the PHY.
The PCS IP block provides a scratch register for testing presence of
the PCS, which is mapped into one of the two MDIO spaces present in
the MAC's register space. Once we have determined that the scratch
register is functioning, we attempt to initialise the PCS to
auto-negotiate an SGMII link with the PHY. There is no need to monitor
or manage the SGMII link beyond this, since the normal PHY MDIO will
then be used to monitor the media layer.
The Altera TSE MAC has only one way in which it can be configured with an
SGMII PCS, and as such, this patch only looks to the phy-mode to select
whether or not to attempt to initialise the PCS registers. During
initialisation, we report the PCS's equivalent of a PHY ID register.
This can be parameterised during the IP instantiation and is often left
as '0x00000000' which is not an error.
Signed-off-by: Neill Whillans <neill.whillans@codethink.co.uk>
Reviewed-by: Daniel Silverstone <daniel.silverstone@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Agate [Wed, 30 Nov 2016 13:41:04 +0000 (13:41 +0000)]
net: phy: vitesse: add support for VSC8572
Add support for the Vitesse VSC8572 which is functionally equivalent to
the already supported VSC8574. As such, all the same handling functions
are used since the VSC8572 merely has half the number of phy blocks
internally.
Signed-off-by: Stephen Agate <stephen.agate@uk.thalesgroup.com>
Signed-off-by: Neill Whillans <neill.whillans@codethink.co.uk>
Reviewed-by: Daniel Silverstone <daniel.silverstone@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 1 Dec 2016 20:39:38 +0000 (15:39 -0500)]
Merge branch 'sfc-defalconisation-fixups'
Edward Cree says:
====================
sfc: defalconisation fixups
A bug fix, the Kconfig change, and cleaning up a bit more unused code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Thu, 1 Dec 2016 17:01:19 +0000 (17:01 +0000)]
sfc: remove RESET_TYPE_RX_RECOVERY
It's no longer used now that Falcon is gone.
Also remove a reference in a comment to an ioctl that doesn't exist.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Thu, 1 Dec 2016 17:01:07 +0000 (17:01 +0000)]
sfc: don't select SFC_FALCON
Easy enough for Falcon users to enable it when making oldconfig.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Thu, 1 Dec 2016 17:00:54 +0000 (17:00 +0000)]
sfc: fix debug message format string in efx_farch_handle_rx_not_ok
Defalconisation removed one of the string arguments, but missed the
corresponding %s.
Fixes:
5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Shengju [Wed, 30 Nov 2016 08:37:34 +0000 (16:37 +0800)]
rtnetlink: return the correct error code
Before this patch, function ndo_dflt_fdb_dump() will always return code
from uc fdb dump. The reture code of mc fdb dump is lost.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Tue, 29 Nov 2016 17:14:56 +0000 (09:14 -0800)]
audit: remove useless synchronize_net()
netlink kernel socket is protected by refcount, not RCU.
Its rcv path is neither protected by RCU. So the synchronize_net()
is just pointless.
Cc: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 1 Dec 2016 16:26:48 +0000 (11:26 -0500)]
Merge branch 'mdix_ctrl'
Raju Lakkaraju says:
====================
Adding PHY MDI(X) support
I updated all review comments which were given by Andrew and Florian.
This series add support for PHY MDI(X), and implement it for MSCC phys.
Tested on Beaglebone Black with VSC 8531 PHY.
Change set:
v1:
- Initial patch submit the WoL and MDI-X in single set of patches
v2:
- Split the mdi(x) as signal set of patches.
- Remove the out_unlock as suggested by Andrew.
- Add mdix_ctrl parameter in "phy_device" to handle the user configure
mdi(x). Proposed implementation accepted by Florian.
- phydev->mdix_ctrl initialize with ETH_TP_MDI_AUTO. Ethernet controller
never initialize this parameter.
- Fix the mdix changes in marvell and microchip driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Lakkaraju [Tue, 29 Nov 2016 09:46:49 +0000 (15:16 +0530)]
net: phy: Fix the mdix_ctrl changes
PHY drivers to have an eth_tp_mdix_ctrl to indicate what is the configured
MDI setting, and read eth_tp_mdi to indicate what is the current status,
Add new parameter mdix_ctrl in phy_device structure and fix driver.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Lakkaraju [Tue, 29 Nov 2016 09:46:48 +0000 (15:16 +0530)]
net: phy: Add mdi(x) support in Microsemi PHYs driver
To connect two ports of the same configuration (MDI to MDI or
MDI-X to MDI-X) with a 10/100/1000 Mbit/s connection, an
Ethernet crossover cable is needed to cross over the transmit
and receive signals in the cable, so that they are matched at
the connector level.
When connecting an MDI port to an MDI-X port a straight through
cable is used while to connect two MDI ports or two MDI-X ports
a crossover cable must be used. Conventionally MDI is used on end
devices while MDI-X is used on hubs and switches
Auto MDI-X automatically detects the required cable connection
type and configures the connection appropriately, removing the
need for crossover cables to interconnect switches or connecting
PCs peer-to-peer.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Lakkaraju [Tue, 29 Nov 2016 09:46:47 +0000 (15:16 +0530)]
net: phy: update the mdix_ctrl with correct value.
Update the mdix and mdix_ctrl with corresponding ethtool configuration
parameters.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Lakkaraju [Tue, 29 Nov 2016 09:46:46 +0000 (15:16 +0530)]
net: phy: add mdix_ctrl to hold the user configuration.
Add new parameter mdix_ctrl to hold the user configuration.
Existing mdix maintain the current status of MDI(X) crossover performed or
not.
mdix_ctrl can configure either ETH_TP_MDI or ETH_TP_MDI_X orETH_TP_MDI_AUTO.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Wed, 30 Nov 2016 00:48:44 +0000 (08:48 +0800)]
driver: ipvlan: Remove useless member mtu_adj of struct ipvl_dev
The mtu_adj is initialized to zero when alloc mem, there is no any
assignment to mtu_adj. It is only used in ipvlan_adjust_mtu as one
right value.
So it is useless member of struct ipvl_dev, then remove it.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Souptick Joarder [Tue, 29 Nov 2016 21:20:18 +0000 (02:50 +0530)]
ethernet :mellanox :mlx5: Replace pci_pool_alloc by pci_pool_zalloc
In alloc_cmd_box(), pci_pool_alloc() followed by memset will be
replaced by pci_pool_zalloc()
Signed-off-by: Souptick joarder <jrdr.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Souptick Joarder [Tue, 29 Nov 2016 19:46:12 +0000 (01:16 +0530)]
ethernet :mellanox :mlx4: Replace pci_pool_alloc by pci_pool_zalloc
In mlx4_alloc_cmd_mailbox(), pci_pool_alloc() followed by memset will be
replaced by pci_pool_zalloc()
Signed-off-by: Souptick joarder <jrdr.linux@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Colitti [Tue, 29 Nov 2016 17:56:47 +0000 (02:56 +0900)]
net: ipv4: Don't crash if passing a null sk to ip_rt_update_pmtu.
Commit
e2d118a1cb5e ("net: inet: Support UID-based routing in IP
protocols.") made __build_flow_key call sock_net(sk) to determine
the network namespace of the passed-in socket. This crashes if sk
is NULL.
Fix this by getting the network namespace from the skb instead.
Fixes:
e2d118a1cb5e ("net: inet: Support UID-based routing in IP protocols.")
Reported-by: Erez Shitrit <erezsh@dev.mellanox.co.il>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Josef Bacik [Tue, 29 Nov 2016 17:35:19 +0000 (12:35 -0500)]
bpf: add test for the verifier equal logic bug
This is a test to verify that
bpf: fix states equal logic for varlen access
actually fixed the problem. The problem was if the register we added to our map
register was UNKNOWN in both the false and true branches and the only thing that
changed was the range then we'd incorrectly assume that the true branch was
valid, which it really wasnt. This tests this case and properly fails without
my fix in place and passes with it in place.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Nov 2016 19:37:15 +0000 (14:37 -0500)]
Merge branch 'cpsw-per-channel-shaping'
Ivan Khoronzhuk says:
====================
cpsw: add per channel shaper configuration
This series is intended to allow user to set rate for per channel
shapers at cpdma level. This patchset doesn't have impact on performance.
The rate can be set with:
echo 100 > /sys/class/net/ethX/queues/tx-0/tx_maxrate
Tested on am572xx
Based on net-next/master
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 29 Nov 2016 15:00:51 +0000 (17:00 +0200)]
net: ethernet: ti: cpsw: split tx budget according between channels
Split device budget between channels according to channel rate.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 29 Nov 2016 15:00:50 +0000 (17:00 +0200)]
net: ethernet: ti: cpsw: optimize end of poll cycle
Check budget fullness only after it's updated and update
channel mask only once to keep budget balance between channels.
It's also needed for farther changes.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 29 Nov 2016 15:00:49 +0000 (17:00 +0200)]
net: ethernet: ti: cpsw: add .ndo to set per-queue rate
This patch allows to rate limit queues tx queues for cpsw interface.
The rate is set in absolute Mb/s units and cannot be more a speed
an interface is connected with.
The rate for a tx queue can be tested with:
ethtool -L eth0 rx 4 tx 4
echo 100 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
echo 200 > /sys/class/net/eth0/queues/tx-1/tx_maxrate
echo 50 > /sys/class/net/eth0/queues/tx-2/tx_maxrate
echo 30 > /sys/class/net/eth0/queues/tx-3/tx_maxrate
tc qdisc add dev eth0 root handle 1: multiq
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\
dport 5001 0xffff action skbedit queue_mapping 0
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\
dport 5002 0xffff action skbedit queue_mapping 1
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\
dport 5003 0xffff action skbedit queue_mapping 2
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\
dport 5004 0xffff action skbedit queue_mapping 3
iperf -c 192.168.2.1 -b 110M -p 5001 -f m -t 60
iperf -c 192.168.2.1 -b 215M -p 5002 -f m -t 60
iperf -c 192.168.2.1 -b 55M -p 5003 -f m -t 60
iperf -c 192.168.2.1 -b 32M -p 5004 -f m -t 60
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 29 Nov 2016 15:00:48 +0000 (17:00 +0200)]
net: ethernet: ti: davinci_cpdma: add set rate for a channel
The cpdma has 8 rate limited tx channels. This patch adds
ability for cpdma driver to use 8 tx h/w shapers. If at least one
channel is not rate limited then it must have higher number, this
is because the rate limited channels have to have higher priority
then not rate limited channels. The channel priority is set in low-hi
direction already, so that when a new channel is added with ethtool
and it doesn't have rate yet, it cannot affect on rate limited
channels. It can be useful for TSN streams and just in cases when
h/w rate limited channels are needed.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 29 Nov 2016 15:00:47 +0000 (17:00 +0200)]
net: ethernet: ti: davinci_cpdma: add weight function for channels
The weight of a channel is needed to split descriptors between
channels. The weight can depend on maximum rate of channels, maximum
rate of an interface or other reasons. The channel weight is in
percentage and is independent for rx and tx channels.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Nov 2016 19:32:06 +0000 (14:32 -0500)]
Merge branch 'qed-XDP-support'
Yuval Mintz says:
====================
qed*: Add XDP support
This patch series is intended to add XDP to the qede driver, although
it contains quite a bit of cleanups, refactorings and infrastructure
changes as well.
The content of this series can be roughly divided into:
- Datapath improvements - mostly focused on having the datapath utilize
parameters which can be more tightly contained in cachelines.
Patches #1, #2, #8, #9 belong to this group.
- Refactoring - done mostly in favour of XDP. Patches #3, #4, #5, #9.
- Infrastructure changes - done in favour of XDP. Paches #6 and #7 belong
to this category [#7 being by far the biggest patch in the series].
- Actual XDP support - last two patches [#10, #11].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:10 +0000 (16:47 +0200)]
qede: Add support for XDP_TX
Add support for forwarding via XDP. Once the eBPF is attached,
driver would allocate & configure a designated transmission queue
meant solely for forwarding packets. Said queue would share the
receive-queue's interrupt line, and would have it's own Tx statistics.
Infrastructure changes required for this [spread-out through the code]:
- Determine the DMA direction of the receive buffers based on the presence
of the eBPF program.
- Turn the sw Tx ring into a union, as regular/XDP queues have different
needs for releasing resources after completion [regular requires the SKB,
XDP requires the transmitted page].
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:09 +0000 (16:47 +0200)]
qede: Add basic XDP support
Add support for the ndo_xdp callback. This patch would support XDP_PASS,
XDP_DROP and XDP_ABORTED commands.
This also adds a per Rx queue statistic which counts number of packets
which didn't reach the stack [due to XDP].
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:08 +0000 (16:47 +0200)]
qede: Better utilize the qede_[rt]x_queue
Improve the cacheline usage of both queues by reordering -
This reduces the cachelines required for egress datapath processing
from 3 to 2 and those required by ingress datapath processing by 2.
It also changes a couple of datapath related functions that currently
require either the fastpath or the qede_dev, changing them to be based
on the tx/rx queue instead.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:07 +0000 (16:47 +0200)]
qede: Don't check netdevice for rx-hash
Receive-hashing is a fixed feature, so there's no need to check
during the ingress datapath whether it's set or not.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:06 +0000 (16:47 +0200)]
qed*: Handle-based L2-queues.
The driver needs to maintain several FW/HW-indices for each one of
its queues. Currently, that mapping is done by the QED where it uses
an rx/tx array of so-called hw-cids, populating them whenever a new
queue is opened and clearing them upon destruction of said queues.
This maintenance is far from ideal - there's no real reason why
QED needs to maintain such a data-structure. It becomes even worse
when considering the fact that the PF's queues and its child VFs' queues
are all mapped into the same data-structure.
As a by-product, the set of parameters an interface needs to supply for
queue APIs is non-trivial, and some of the variables in the API
structures have different meaning depending on their exact place
in the configuration flow.
This patch re-organizes the way L2 queues are configured and maintained.
In short:
- Required parameters for queue init are now well-defined.
- Qed would allocate a queue-cid based on parameters.
Upon initialization success, it would return a handle to caller.
- Queue-handle would be maintained by entity requesting queue-init,
not necessarily qed.
- All further queue-APIs [update, destroy] would use the opaque
handle as reference for the queue instead of various indices.
The possible owners of such handles:
- PF queues [qede] - complete handles based on provided configuration.
- VF queues [qede] - fw-context-less handles, containing only relative
information; Only the PF-side would need the absolute indices
for configuration, so they're omitted here.
- VF queues [qed, PF-side] - complete handles based on VF initialization.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:05 +0000 (16:47 +0200)]
qede: Revise state locking scheme
As qede utilizes an internal-reload sequence as result of various
configuration changes, the netif state wouldn't always accurately describe
the status of the configuration.
To compensate, we're storing an internal state of the device, which should
only be accessed under the qede_lock.
This patch fixes and improves several state/lock interactions:
- The internal state should only be checked while locked.
- While holding lock, it's preferable to check state rather than
the netdevice's state.
- The reload sequence is not 'atomic' - unload and subsequent load
are not in the same critical section.
This also add the 'locked' variant for the reload, which would later be
used by XDP - useful in the case where the correct sequence is 'lock,
check state and re-configure if good', instead of allowing the reload
itself to make the decision regarding the configurability of the device.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:04 +0000 (16:47 +0200)]
qede: Refactor data-path Rx flow
Driver's NAPI poll is using a long sequence for processing ingress
packets, and it's going to get even longer once we do XDP.
Break down the main loop into a series of sub-functions to allow
better readability of the function.
While we're at it, correct the accounting of the NAPI budget -
currently we're counting only packets passed to the stack against
the budget, even in case those are actually aggregations.
After refactoring every CQE processed would be counted against the budget.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:03 +0000 (16:47 +0200)]
qede: Refactor statistics gathering
Refactor logic for gathering statistics into a per-queue function.
This improves readability of the driver statistics' flows.
In addition, this would be required by the XDP forwarding queues
[as we'll need the Txq statistics gathering methods for those as well].
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:02 +0000 (16:47 +0200)]
qede: Remove 'num_tc'.
Driver currently doesn't support multi-CoS, but it contains logic
where multiple transmission queues could be theoretically manipulated.
No point in maintaining the infrastructure at the moment.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:01 +0000 (16:47 +0200)]
qed: Optimize qed_chain datapath usage
The chain structure and functions are widely used by the qed* modules,
both for configuration and datapath.
E.g., qede's Tx has one such chain and its Rx has two.
Currently, the strucutre's fields which are required for datapath
related functions [produce/consume] are intertwined with fields which
are required only for configuration purposes [init/destroy/etc.].
This patch re-arranges the chain structure so that all the fields which
are required for datapath usage could reside in a single cacheline instead
of the two which are required today.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 29 Nov 2016 14:47:00 +0000 (16:47 +0200)]
qede: Optimize aggregation information size
Driver needs to maintain a structure per-each concurrent possible
open aggregation, but the structure storing that metadata is far from
being optimized - biggest waste in it is that there are 2 buffer metadata,
one for a replacement buffer when the aggregation begins and the other for
holding the first aggregation's buffer after it begins [as firmware might
still update it]. Those 2 can safely be united into a single metadata
structure.
struct qede_agg_info changes the following:
/* size: 120, cachelines: 2, members: 9 */
/* sum members: 114, holes: 1, sum holes: 4 */
/* padding: 2 */
/* paddings: 2, sum paddings: 8 */
/* last cacheline: 56 bytes */
-->
/* size: 48, cachelines: 1, members: 9 */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 48 bytes */
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Tue, 29 Nov 2016 13:35:07 +0000 (14:35 +0100)]
ehea: Remove unnecessary memset of stats in netdev private data
The memory for netdev private data is allocated using kzalloc/vzalloc in
alloc_netdev_mqs, thus there is no need to zero the stats portion of it
again in the driver's probe function.
In any case, the size for the memset is wrong as the stats member is of
type rtnl_link_stats64, not net_device_stats.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Wed, 30 Nov 2016 18:16:08 +0000 (10:16 -0800)]
cgroup, bpf: remove unnecessary #include
this #include is unnecessary and brings whole set of
other headers into cgroup-defs.h. Remove it.
Fixes:
3007098494be ("cgroup: add support for eBPF programs")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Rami Rosen <roszenrami@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Shengju [Wed, 30 Nov 2016 03:24:42 +0000 (11:24 +0800)]
neigh: remove duplicate check for same neigh
Currently loop index 'idx' is used as the index in the neigh list of interest.
It's increased only when the neigh is dumped. It's not the absolute index in
the list. Because there is no info to record which neigh has already be scanned
by previous loop. This will cause the filtered out neighs to be scanned mulitple
times.
This patch make idx as the absolute index in the list, it will increase no matter
whether the neigh is filtered. This will prevent the above problem.
And this is in line with other dump functions.
v2:
- take David Ahern's advice to do simple change
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 29 Nov 2016 06:07:22 +0000 (22:07 -0800)]
samples/bpf: fix include path
Fix the following build error:
HOSTCC samples/bpf/test_lru_dist.o
../samples/bpf/test_lru_dist.c:25:22: fatal error: bpf_util.h: No such file or directory
This is due to objtree != srctree.
Use srctree, since that's where bpf_util.h is located.
Fixes:
e00c7b216f34 ("bpf: fix multiple issues in selftest suite and samples")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Shengju [Tue, 29 Nov 2016 03:26:32 +0000 (11:26 +0800)]
macvtap: replace printk with netdev_err
This patch replaces printk() with netdev_err() for macvtap device.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Nov 2016 16:03:10 +0000 (11:03 -0500)]
Merge branch 'liquidio-VF'
Raghu Vatsavayi says:
====================
liquidio VF operations
This patchseries adds support for VF device specific operations
like mailbox, queues and register access. This V3 patchset also
has changes based on comments form earlier versions:
1) Removed extra 'void *' casting.
2) Fixed all cross compilations issues reported on S390 and Powerpc
architectures.
Please apply the patches in following order as these patches depend
on each other.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Raghu Vatsavayi [Tue, 29 Nov 2016 00:54:41 +0000 (16:54 -0800)]
liquidio CN23XX: VF init and destroy
Adds support for VF initialization and destroy resources.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raghu Vatsavayi [Tue, 29 Nov 2016 00:54:40 +0000 (16:54 -0800)]
liquidio CN23XX: VF interrupt
Adds support for VF interrupt processing.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raghu Vatsavayi [Tue, 29 Nov 2016 00:54:39 +0000 (16:54 -0800)]
liquidio CN23XX: VF mailbox
Adds support for VF mailbox setup.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raghu Vatsavayi [Tue, 29 Nov 2016 00:54:38 +0000 (16:54 -0800)]
liquidio CN23XX: init VF softcommand queues
Adds support for initializing softcommand, dispatch and
instructions queues for VF.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raghu Vatsavayi [Tue, 29 Nov 2016 00:54:37 +0000 (16:54 -0800)]
liquidio CN23XX: VF register access
This patch adds support for VF device register access.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raghu Vatsavayi [Tue, 29 Nov 2016 00:54:36 +0000 (16:54 -0800)]
liquidio CN23XX: VF queue setup
Adds support for configuring VF input/output queues.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raghu Vatsavayi [Tue, 29 Nov 2016 00:54:35 +0000 (16:54 -0800)]
liquidio CN23XX: VF config setup
Adds support for setting up VF configuration.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raghu Vatsavayi [Tue, 29 Nov 2016 00:54:34 +0000 (16:54 -0800)]
liquidio CN23XX: VF registration
Adds support for cn23xx VF probe and registration.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raghu Vatsavayi [Tue, 29 Nov 2016 00:54:33 +0000 (16:54 -0800)]
liquidio CN23XX: VF register definitions
Adds support for CN23xx VF registers.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sargun Dhillon [Mon, 28 Nov 2016 22:52:42 +0000 (14:52 -0800)]
samples: bpf: Refactor test_cgrp2_attach -- use getopt, and add mode
This patch modifies test_cgrp2_attach to use getopt so we can use standard
command line parsing.
It also adds an option to run the program in detach only mode. This does
not attach a new filter at the cgroup, but only runs the detach command.
Lastly, it changes the attach code to not detach and then attach. It relies
on the 'hotswap' behaviour of CGroup BPF programs to be able to change
in-place. If detach-then-attach behaviour needs to be tested, the example
can be run in detach only mode prior to attachment.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Philippe Reynes [Mon, 28 Nov 2016 22:52:19 +0000 (23:52 +0100)]
net: brocade: bna: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Acked-by: Rasesh Mody <Rasesh.Mody@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 28 Nov 2016 22:16:54 +0000 (23:16 +0100)]
bpf, xdp: allow to pass flags to dev_change_xdp_fd
Add an IFLA_XDP_FLAGS attribute that can be passed for setting up
XDP along with IFLA_XDP_FD, which eventually allows user space to
implement typical add/replace/delete logic for programs. Right now,
calling into dev_change_xdp_fd() will always replace previous programs.
When passed XDP_FLAGS_UPDATE_IF_NOEXIST, we can handle this more
graceful when requested by returning -EBUSY in case we try to
attach a new program, but we find that another one is already
attached. This will be used by upcoming front-end for iproute2 as
well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Nov 2016 15:22:28 +0000 (10:22 -0500)]
Merge branch 'broadcom-phy-internal-counters'
Florian Fainelli says:
====================
net: phy: broadcom: Support for PHY counters
This patch series adds support for reading the Broadcom PHYs internal counters.
Changes in v3:
- fixed the allocation of priv->stats in bcm7xxx
Changes in v2:
- fixed modular build reported by kbuild
- constify array of stats
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 29 Nov 2016 17:57:18 +0000 (09:57 -0800)]
net: phy: bcm7xxx: Plug in support for reading PHY error counters
Broadcom BCM7xxx internal PHYs can leverage the Broadcom PHY library
module PHY error counters helper functions, just implement the
appropriate PHY driver function calls to do so. We need to allocate some
storage space for our PHY statistics, and provide it to the Broadcom PHY
library, so do this in a specific probe function, and slightly wrap the
get_stats function call.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 29 Nov 2016 17:57:17 +0000 (09:57 -0800)]
net: phy: broadcom: Add support code for reading PHY counters
Broadcom PHYs expose a number of PHY error counters: receive errors,
false carrier sense, SerDes BER count, local and remote receive errors.
Add support code to allow retrieving these error counters. Since the
Broadcom PHY library code is used by several drivers, make it possible
for them to specify the storage for the software copy of the statistics.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Mon, 28 Nov 2016 18:55:34 +0000 (18:55 +0000)]
sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver
Rationale: The differences between Falcon and Siena are in many ways larger
than those between Siena and EF10 (despite Siena being nominally "Falcon-
architecture"); for instance, Falcon has no MCPU, so there is no MCDI.
Removing Falcon support from the sfc driver should simplify the latter,
and avoid the possibility of Falcon support being broken by changes to sfc
(which are rarely if ever tested on Falcon, it being end-of-lifed hardware).
The sfc-falcon driver created in this changeset is essentially a copy of the
sfc driver, but with Siena- and EF10-specific code, including MCDI, removed
and with the "efx_" identifier prefix changed to "ef4_" (for "EFX 4000-
series") to avoid collisions when both drivers are built-in.
This changeset removes Falcon from the sfc driver's PCI ID table; then in
sfc I've removed obvious Falcon-related code: I removed the Falcon NIC
functions, Falcon PHY code, and EFX_REV_FALCON_*, then fixed up everything
that referenced them.
Also, increment minor version of both drivers (to 4.1).
For now, CONFIG_SFC selects CONFIG_SFC_FALCON, so that updating old configs
doesn't cause Falcon support to disappear; but that should be undone at
some point in the future.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>