OSDN Git Service
Wei Wang [Thu, 10 Sep 2020 00:50:48 +0000 (17:50 -0700)]
tcp: reflect tos value received in SYN to the socket
This commit adds a new TCP feature to reflect the tos value received in
SYN, and send it out on the SYN-ACK, and eventually set the tos value of
the established socket with this reflected tos value. This provides a
way to set the traffic class/QoS level for all traffic in the same
connection to be the same as the incoming SYN request. It could be
useful in data centers to provide equivalent QoS according to the
incoming request.
This feature is guarded by /proc/sys/net/ipv4/tcp_reflect_tos, and is by
default turned off.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Thu, 10 Sep 2020 00:50:47 +0000 (17:50 -0700)]
ip: pass tos into ip_build_and_send_pkt()
This commit adds tos as a new passed in parameter to
ip_build_and_send_pkt() which will be used in the later commit.
This is a pure restructure and does not have any functional change.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Thu, 10 Sep 2020 00:50:46 +0000 (17:50 -0700)]
tcp: record received TOS value in the request socket
A new field is added to the request sock to record the TOS value
received on the listening socket during 3WHS:
When not under syn flood, it is recording the TOS value sent in SYN.
When under syn flood, it is recording the TOS value sent in the ACK.
This is a preparation patch in order to do TOS reflection in the later
commit.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Wed, 9 Sep 2020 21:05:23 +0000 (23:05 +0200)]
net: mventa: drop mvneta_stats from mvneta_swbm_rx_frame signature
Remove mvneta_stats from mvneta_swbm_rx_frame signature since now stats
are accounted in mvneta_run_xdp routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Sep 2020 20:08:47 +0000 (13:08 -0700)]
Merge branch 'netpoll-make-sure-napi_list-is-safe-for-RCU-traversal'
Jakub Kicinski says:
====================
netpoll: make sure napi_list is safe for RCU traversal
This series is a follow-up to the fix in commit
96e97bc07e90 ("net:
disable netpoll on fresh napis"). To avoid any latent race conditions
convert dev->napi_list to a proper RCU list. We need minor restructuring
because it looks like netif_napi_del() used to be idempotent, and
it may be quite hard to track down everyone who depends on that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 9 Sep 2020 17:37:53 +0000 (10:37 -0700)]
net: make sure napi_list is safe for RCU traversal
netpoll needs to traverse dev->napi_list under RCU, make
sure it uses the right iterator and that removal from this
list is handled safely.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 9 Sep 2020 17:37:52 +0000 (10:37 -0700)]
net: manage napi add/del idempotence explicitly
To RCUify napi->dev_list we need to replace list_del_init()
with list_del_rcu(). There is no _init() version for RCU for
obvious reasons. Up until now netif_napi_del() was idempotent
so to make sure it remains such add a bit which is set when
NAPI is listed, and cleared when it removed. Since we don't
expect multiple calls to netif_napi_add() to be correct,
add a warning on that side.
Now that napi_hash_add / napi_hash_del are only called by
napi_add / del we can actually steal its bit. We just need
to make sure hash node is initialized correctly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 9 Sep 2020 17:37:51 +0000 (10:37 -0700)]
net: remove napi_hash_del() from driver-facing API
We allow drivers to call napi_hash_del() before calling
netif_napi_del() to batch RCU grace periods. This makes
the API asymmetric and leaks internal implementation details.
Soon we will want the grace period to protect more than just
the NAPI hash table.
Restructure the API and have drivers call a new function -
__netif_napi_del() if they want to take care of RCU waits.
Note that only core was checking the return status from
napi_hash_del() so the new helper does not report if the
NAPI was actually deleted.
Some notes on driver oddness:
- veth observed the grace period before calling netif_napi_del()
but that should not matter
- myri10ge observed normal RCU flavor
- bnx2x and enic did not actually observe the grace period
(unless they did so implicitly)
- virtio_net and enic only unhashed Rx NAPIs
The last two points seem to indicate that the calls to
napi_hash_del() were a left over rather than an optimization.
Regardless, it's easy enough to correct them.
This patch may introduce extra synchronize_net() calls for
interfaces which set NAPI_STATE_NO_BUSY_POLL and depend on
free_netdev() to call netif_napi_del(). This seems inevitable
since we want to use RCU for netpoll dev->napi_list traversal,
and almost no drivers set IFF_DISABLE_NETPOLL.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Sep 2020 19:49:00 +0000 (12:49 -0700)]
Merge branch 'mlx4-avoid-devlink-port-type-not-set-warnings'
Jakub Kicinski says:
====================
mlx4: avoid devlink port type not set warnings
This small set addresses the issue of mlx4 potentially not setting
devlink port type when Ethernet or IB driver is not built, but
port has that type.
v2:
- add patch 1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 8 Sep 2020 22:21:14 +0000 (15:21 -0700)]
mlx4: make sure to always set the port type
Even tho mlx4_core registers the devlink ports, it's mlx4_en
and mlx4_ib which set their type. In situations where one of
the two is not built yet the machine has ports of given type
we see the devlink warning from devlink_port_type_warn() trigger.
Having ports of a type not supported by the kernel may seem
surprising, but it does occur in practice - when the unsupported
port is not plugged in to a switch anyway users are more than happy
not to see it (and potentially allocate any resources to it).
Set the type in mlx4_core if type-specific driver is not built.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 8 Sep 2020 22:21:13 +0000 (15:21 -0700)]
devlink: don't crash if netdev is NULL
Following change will add support for a corner case where
we may not have a netdev to pass to devlink_port_type_eth_set()
but we still want to set port type.
This is definitely a corner case, and drivers should not normally
pass NULL netdev - print a warning message when this happens.
Sadly for other port types (ib) switches don't have a device
reference, the way we always do for Ethernet, so we can't put
the warning in __devlink_port_type_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Tue, 8 Sep 2020 18:23:31 +0000 (20:23 +0200)]
net: mvneta: rely on MVNETA_MAX_RX_BUF_SIZE for pkt split in mvneta_swbm_rx_frame()
In order to easily change the rx buffer size, rely on
MVNETA_MAX_RX_BUF_SIZE instead of PAGE_SIZE in mvneta_swbm_rx_frame
routine for rx buffer split. Currently this is not an issue since we set
MVNETA_MAX_RX_BUF_SIZE to PAGE_SIZE - MVNETA_SKB_PAD but it is a good to
have to configure a different rx buffer size.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 10 Sep 2020 19:25:51 +0000 (12:25 -0700)]
Merge branch 'Allow-more-than-255-IPv4-multicast-interfaces'
Paul Davey says:
====================
Allow more than 255 IPv4 multicast interfaces
Currently it is not possible to use more than 255 multicast interfaces
for IPv4 due to the format of the igmpmsg header which only has 8 bits
available for the VIF ID. There is space available in the igmpmsg
header to store the full VIF ID in the form of an unused byte following
the VIF ID field. There is also enough space for the full VIF ID in
the Netlink cache notifications, however the value is currently taken
directly from the igmpmsg header and has thus already been truncated.
Adding the high byte of the VIF ID into the unused3 byte of igmpmsg
allows use of more than 255 IPv4 multicast interfaces. The full VIF ID
is also available in the Netlink notification by assembling it from
both bytes from the igmpmsg.
Additionally this reveals a deficiency in the Netlink cache report
notifications, they lack any means for differentiating cache reports
relating to different multicast routing tables. This is easily
resolved by adding the multicast route table ID to the cache reports.
changes in v2:
- Added high byte of VIF ID to igmpmsg struct replacing unused3
member.
- Assemble VIF ID in Netlink notification from both bytes in igmpmsg
header.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Davey [Mon, 7 Sep 2020 22:04:08 +0000 (10:04 +1200)]
ipmr: Use full VIF ID in netlink cache reports
Insert the full 16 bit VIF ID into ipmr Netlink cache reports.
The VIF_ID attribute has 32 bits of space so can store the full VIF ID
extracted from the high and low byte fields in the igmpmsg.
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Davey [Mon, 7 Sep 2020 22:04:07 +0000 (10:04 +1200)]
ipmr: Add high byte of VIF ID to igmpmsg
Use the unused3 byte in struct igmpmsg to hold the high 8 bits of the
VIF ID.
If using more than 255 IPv4 multicast interfaces it is necessary to have
access to a VIF ID for cache reports that is wider than 8 bits, the VIF
ID present in the igmpmsg reports sent to mroute_sk was only 8 bits wide
in the igmpmsg header. Adding the high 8 bits of the 16 bit VIF ID in
the unused byte allows use of more than 255 IPv4 multicast interfaces.
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Davey [Mon, 7 Sep 2020 22:04:06 +0000 (10:04 +1200)]
ipmr: Add route table ID to netlink cache reports
Insert the multicast route table ID as a Netlink attribute to Netlink
cache report notifications.
When multiple route tables are in use it is necessary to have a way to
determine which route table a given cache report belongs to when
receiving the cache report.
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 9 Sep 2020 17:49:31 +0000 (10:49 -0700)]
net: dsa: b53: Report VLAN table occupancy via devlink
We already maintain an array of VLANs used by the switch so we can
simply iterate over it to report the occupancy via devlink.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 Sep 2020 21:22:42 +0000 (14:22 -0700)]
Merge branch 'Marvell-PP2-2-PTP-support'
Russell King says:
====================
Marvell PP2.2 PTP support
This series adds PTP support for PP2.2 hardware to the mvpp2 driver.
Tested on the Macchiatobin eth1 port.
Note that on the Macchiatobin, eth0 uses a separate TAI block from
eth1, and there is no hardware synchronisation between the two.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Wed, 9 Sep 2020 16:26:00 +0000 (17:26 +0100)]
net: mvpp2: ptp: add support for transmit timestamping
Add support for timestamping transmit packets. We allocate SYNC
messages to queue 1, every other message to queue 0.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Wed, 9 Sep 2020 16:25:55 +0000 (17:25 +0100)]
net: mvpp2: ptp: add support for receive timestamping
Add support for receive timestamping. When enabled, the hardware adds
a timestamp into the receive queue descriptor for all received packets
with no filtering. Hence, we can only support NONE or ALL receive
filter modes.
The timestamp in the receive queue contains two bit sof seconds and
the full nanosecond timestamp. This has to be merged with the remainder
of the seconds from the TAI clock to arrive at a full timestamp before
we can convert it to a ktime for the skb hardware timestamp field.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Wed, 9 Sep 2020 16:25:50 +0000 (17:25 +0100)]
net: mvpp2: ptp: add TAI support
Add support for the TAI block in the mvpp2.2 hardware.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Wed, 9 Sep 2020 16:25:45 +0000 (17:25 +0100)]
net: mvpp2: check first level interrupt status registers
Check the first level interrupt status registers to determine how to
further process the port interrupt. We will need this to know whether
to invoke the link status processing and/or the PTP processing for
both XLG and GMAC.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Wed, 9 Sep 2020 16:25:40 +0000 (17:25 +0100)]
net: mvpp2: rename mis-named "link status" interrupt
The link interrupt is used for way more than just the link status; it
comes from a collection of units to do with the port. The Marvell
documentation describes the interrupt as "GOP port X interrupt".
Since we are adding PTP support, and the PTP interrupt uses this,
rename it to be more inline with the documentation.
This interrupt is also mis-named in the DT binding, but we leave that
alone.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Wed, 9 Sep 2020 16:25:35 +0000 (17:25 +0100)]
net: mvpp2: restructure "link status" interrupt handling
The "link status" interrupt is used for more than just link status.
Restructure mvpp2_link_status_isr() so we can add additional handling.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 Sep 2020 21:19:56 +0000 (14:19 -0700)]
Merge branch 'devlink-show-controller-number'
Parav Pandit says:
====================
devlink show controller number
Currently a devlink instance that supports an eswitch handles eswitch
ports of two type of controllers.
(1) controller discovered on same system where eswitch resides.
This is the case where PCI PF/VF of a controller and devlink eswitch
instance both are located on a single system.
(2) controller located on external system.
This is the case where a controller is plugged in one system and its
devlink eswitch ports are located in a different system. In this case
devlink instance of the eswitch only have access to ports of the
controller.
However, there is no way to describe that a eswitch devlink port
belongs to which controller (mainly which external host controller).
This problem is more prevalent when port attribute such as PF and VF
numbers are overlapping between multiple controllers of same eswitch.
Due to this, for a specific switch_id, unique phys_port_name cannot
be constructed for such devlink ports.
This short series overcomes this limitation by defining two new
attributes.
(a) external: Indicates if port belongs to external controller
(b) controller number: Indicates a controller number of the port
Based on this a unique phys_port_name is prepared using controller
number.
phys_port_name construction using unique controller number is only
applicable to external controller ports. This ensures that for
non smartnic usecases where there is no external controller,
phys_port_name stays same as before.
Patch summary:
Patch-1 Added mlx5 driver to read controller number
Patch-2 Adds the missing comment for the port attributes
Patch-3 Move structure comments away from structure fields
Patch-4 external attribute added for PCI port flavours
Patch-5 Add controller number
Patch-6 Use controller number to build phys_port_name
---
Changelog:
v2->v3:
- Updated diagram to get rid of controller 'A' and 'B'
- Kept ports of single controller together in diagram
- Updated diagram for pf1's VF and SF and its ports
v1->v2:
- Added text diagram of multiple controllers
- Updated example for a VF
- Addressed comments from Jiri and Jakub
- Moved controller number attribute to PCI port flavours
This enables to better, hirerchical view with controller and its
PF, VF numbers
- Split 'external' and 'controller number' attributes as two
different attributes
- Merged mlx5_core driver to avoid compiliation break
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Wed, 9 Sep 2020 04:50:38 +0000 (07:50 +0300)]
devlink: Use controller while building phys_port_name
Now that controller number attribute is available, use it when
building phsy_port_name for external controller ports.
An example devlink port and representor netdev name consist of controller
annotation for external controller with controller number = 1,
for a VF 1 of PF 0:
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev ens2f0c1pf0vf1 flavour pcivf controller 1 pfnum 0 vfnum 1 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port show pci/0000:06:00.0/2 -jp
{
"port": {
"pci/0000:06:00.0/2": {
"type": "eth",
"netdev": "ens2f0c1pf0vf1",
"flavour": "pcivf",
"controller": 1,
"pfnum": 0,
"vfnum": 1,
"external": true,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:00:00"
}
}
}
}
Controller number annotation is skipped for non external controllers to
maintain backward compatibility.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Wed, 9 Sep 2020 04:50:37 +0000 (07:50 +0300)]
devlink: Introduce controller number
A devlink port may be for a controller consist of PCI device.
A devlink instance holds ports of two types of controllers.
(1) controller discovered on same system where eswitch resides
This is the case where PCI PF/VF of a controller and devlink eswitch
instance both are located on a single system.
(2) controller located on external host system.
This is the case where a controller is located in one system and its
devlink eswitch ports are located in a different system.
When a devlink eswitch instance serves the devlink ports of both
controllers together, PCI PF/VF numbers may overlap.
Due to this a unique phys_port_name cannot be constructed.
For example in below such system controller-0 and controller-1, each has
PCI PF pf0 whose eswitch ports can be present in controller-0.
These results in phys_port_name as "pf0" for both.
Similar problem exists for VFs and upcoming Sub functions.
An example view of two controller systems:
---------------------------------------------------------
| |
| --------- --------- ------- ------- |
----------- | | vf(s) | | sf(s) | |vf(s)| |sf(s)| |
| server | | ------- ----/---- ---/----- ------- ---/--- ---/--- |
| pci rc |=== | pf0 |______/________/ | pf1 |___/_______/ |
| connect | | ------- ------- |
----------- | | controller_num=1 (no eswitch) |
------|--------------------------------------------------
(internal wire)
|
---------------------------------------------------------
| devlink eswitch ports and reps |
| ----------------------------------------------------- |
| |ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 |ctrl-0 | |
| |pf0 | pf0vfN | pf0sfN | pf1 | pf1vfN |pf1sfN | |
| ----------------------------------------------------- |
| |ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 |ctrl-1 | |
| |pf1 | pf1vfN | pf1sfN | pf1 | pf1vfN |pf0sfN | |
| ----------------------------------------------------- |
| |
| |
| --------- --------- ------- ------- |
| | vf(s) | | sf(s) | |vf(s)| |sf(s)| |
| ------- ----/---- ---/----- ------- ---/--- ---/--- |
| | pf0 |______/________/ | pf1 |___/_______/ |
| ------- ------- |
| |
| local controller_num=0 (eswitch) |
---------------------------------------------------------
An example devlink port for external controller with controller
number = 1 for a VF 1 of PF 0:
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf controller 1 pfnum 0 vfnum 1 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port show pci/0000:06:00.0/2 -jp
{
"port": {
"pci/0000:06:00.0/2": {
"type": "eth",
"netdev": "ens2f0pf0vf1",
"flavour": "pcivf",
"controller": 1,
"pfnum": 0,
"vfnum": 1,
"external": true,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:00:00"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Wed, 9 Sep 2020 04:50:36 +0000 (07:50 +0300)]
devlink: Introduce external controller flag
A devlink eswitch port may represent PCI PF/VF ports of a controller.
A controller either located on same system or it can be an external
controller located in host where such NIC is plugged in.
Add the ability for driver to specify if a port is for external
controller.
Use such flag in the mlx5_core driver.
An example of an external controller having VF1 of PF0 belong to
controller 1.
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf pfnum 0 vfnum 1 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port show pci/0000:06:00.0/2 -jp
{
"port": {
"pci/0000:06:00.0/2": {
"type": "eth",
"netdev": "ens2f0pf0vf1",
"flavour": "pcivf",
"pfnum": 0,
"vfnum": 1,
"external": true,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:00:00"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Wed, 9 Sep 2020 04:50:35 +0000 (07:50 +0300)]
devlink: Move structure comments outside of structure
To add more fields to the PCI PF and VF port attributes, follow standard
structure comment format.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Wed, 9 Sep 2020 04:50:34 +0000 (07:50 +0300)]
devlink: Add comment block for missing port attributes
Add comment block for physical, PF and VF port attributes.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Wed, 9 Sep 2020 04:50:33 +0000 (07:50 +0300)]
net/mlx5: E-switch, Read controller number from device
ECPF supports one external host controller. Read controller number
from the device.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Changzhong [Wed, 9 Sep 2020 14:09:00 +0000 (22:09 +0800)]
net: stmmac: dwmac-intel-plat: remove redundant null check before clk_disable_unprepare()
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Changzhong [Wed, 9 Sep 2020 14:06:37 +0000 (22:06 +0800)]
net: pxa168_eth: remove redundant null check before clk_disable_unprepare()
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 Sep 2020 21:15:02 +0000 (14:15 -0700)]
Merge branch 'SMSC-Cleanups-and-clock-setup'
Marco Felsch says:
====================
SMSC: Cleanups and clock setup
this small series cleans the smsc-phy code a bit and adds the support to
specify the phy clock source. Adding the phy clock source support is
also the main purpose of this series.
Each file has its own changelog.
Thanks a lot to Florian and Andrew for reviewing it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marco Felsch [Wed, 9 Sep 2020 13:45:01 +0000 (15:45 +0200)]
net: phy: smsc: LAN8710/20: remove PHY_RST_AFTER_CLK_EN flag
Don't reset the phy without respect to the PHY library state machine
because this breaks the phy IRQ mode. The same behaviour can be archived
now by specifying the refclk.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marco Felsch [Wed, 9 Sep 2020 13:45:00 +0000 (15:45 +0200)]
net: phy: smsc: LAN8710/20: add phy refclk in support
Add support to specify the clock provider for the PHY refclk and don't
rely on 'magic' host clock setup. [1] tried to address this by
introducing a flag and fixing the corresponding host. But this commit
breaks the IRQ support since the irq setup during .config_intr() is
thrown away because the reset comes from the side without respecting the
current PHY state within the PHY library state machine. Furthermore the
commit fixed the problem only for FEC based hosts other hosts acting
like the FEC are not covered.
This commit goes the other way around to address the bug fixed by [1].
Instead of resetting the device from the side every time the refclk gets
(re-)enabled it requests and enables the clock till the device gets
removed. Now the PHY library is the only place where the PHY gets reset
to respect the PHY library state machine.
[1] commit
7f64e5b18ebb ("net: phy: smsc: LAN8710/20: add
PHY_RST_AFTER_CLK_EN flag")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marco Felsch [Wed, 9 Sep 2020 13:44:59 +0000 (15:44 +0200)]
dt-bindings: net: phy: smsc: document reference clock
Add support to specify the reference clock for the phy.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marco Felsch [Wed, 9 Sep 2020 13:44:58 +0000 (15:44 +0200)]
net: phy: smsc: simplify config_init callback
Exit the driver specific config_init hook early if energy detection is
disabled. We can do this because we don't need to clear the interrupt
status here. Clearing the status should be removed anyway since this is
handled by the phy_enable_interrupts().
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marco Felsch [Wed, 9 Sep 2020 13:44:57 +0000 (15:44 +0200)]
net: phy: smsc: skip ENERGYON interrupt if disabled
Don't enable the interrupt if the platform disable the energy detection
by "smsc,disable-energy-detect".
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Hai [Wed, 9 Sep 2020 13:21:09 +0000 (21:21 +0800)]
net: cavium: Fix a bunch of kerneldoc parameter issues
Rename ptp to ptp_info.
Fix W=1 compile warnings (invalid kerneldoc):
drivers/net/ethernet/cavium/common/cavium_ptp.c:94: warning: Excess function parameter 'ptp' description in 'cavium_ptp_adjfine'
drivers/net/ethernet/cavium/common/cavium_ptp.c:141: warning: Excess function parameter 'ptp' description in 'cavium_ptp_adjtime'
drivers/net/ethernet/cavium/common/cavium_ptp.c:163: warning: Excess function parameter 'ptp' description in 'cavium_ptp_gettime'
drivers/net/ethernet/cavium/common/cavium_ptp.c:185: warning: Excess function parameter 'ptp' description in 'cavium_ptp_settime'
drivers/net/ethernet/cavium/common/cavium_ptp.c:208: warning: Excess function parameter 'ptp' description in 'cavium_ptp_enable'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ayush Sawal [Wed, 9 Sep 2020 10:36:20 +0000 (16:06 +0530)]
cxgb4/ch_ipsec: Registering xfrmdev_ops with cxgb4
As ch_ipsec was removed without clearing xfrmdev_ops and netdev
feature(esp-hw-offload). When a recalculation of netdev feature is
triggered by changing tls feature(tls-hw-tx-offload) from user
request, it causes a page fault due to absence of valid xfrmdev_ops.
Fixes:
6dad4e8ab3ec ("chcr: Add support for Inline IPSec")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 Sep 2020 18:26:32 +0000 (11:26 -0700)]
Merge branch 'ksz9477-dsa-switch-driver-improvements'
Paul Barker says:
====================
ksz9477 dsa switch driver improvements
These changes were made while debugging the ksz9477 driver for use on a
custom board which uses the ksz9893 switch supported by this driver. The
patches have been runtime tested on top of Linux 5.8.4, I couldn't
runtime test them on top of 5.9-rc3 due to unrelated issues. They have
been build tested on top of net-next.
These changes can also be pulled from:
https://gitlab.com/pbarker.dev/staging/linux.git
tag: for-net-next/ksz-v3_2020-09-09
Changes from v2:
* Fixed incorrect type in assignment error.
Reported-by: kernel test robot <lkp@intel.com>
Changes from v1:
* Rebased onto net-next.
* Dropped unnecessary `#include <linux/printk.h>`.
* Instead of printing the phy mode in `ksz9477_port_setup()`, modify
the existing print in `ksz9477_config_cpu_port()` to always produce
output and to be more clear.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Barker [Wed, 9 Sep 2020 10:04:17 +0000 (11:04 +0100)]
net: dsa: microchip: Implement recommended reset timing
The datasheet for the ksz9893 and ksz9477 switches recommend waiting at
least 100us after the de-assertion of reset before trying to program the
device through any interface.
Also switch the existing msleep() call to usleep_range() as recommended
in Documentation/timers/timers-howto.rst. The 2ms range used here is
somewhat arbitrary, as long as the reset is asserted for at least 10ms
we should be ok.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Barker [Wed, 9 Sep 2020 10:04:16 +0000 (11:04 +0100)]
net: dsa: microchip: Disable RGMII in-band status on KSZ9893
We can't assume that the link partner supports the in-band status
reporting which is enabled by default on the KSZ9893 when using RGMII
for the upstream port.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Barker [Wed, 9 Sep 2020 10:04:15 +0000 (11:04 +0100)]
net: dsa: microchip: Improve phy mode message
Always print the selected phy mode for the CPU port when using the
ksz9477 driver. If the phy mode was changed, also print the previous
mode to aid in debugging.
To make the message more clear, prefix it with the port number which it
applies to and improve the language a little.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Barker [Wed, 9 Sep 2020 10:04:14 +0000 (11:04 +0100)]
net: dsa: microchip: Make switch detection more informative
To make switch detection more informative print the result of the
ksz9477/ksz9893 compatibility check. With debug output enabled also
print the contents of the Chip ID registers as a 40-bit hex string.
As this detection is the first communication with the switch performed
by the driver, making it easy to see any errors here will help identify
issues with SPI data corruption or reset sequencing.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 Sep 2020 18:21:19 +0000 (11:21 -0700)]
Merge git://git./linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Rewrite inner header IPv6 in ICMPv6 messages in ip6t_NPT,
from Michael Zhou.
2) do_ip_vs_set_ctl() dereferences uninitialized value,
from Peilin Ye.
3) Support for userdata in tables, from Jose M. Guisado.
4) Do not increment ct error and invalid stats at the same time,
from Florian Westphal.
5) Remove ct ignore stats, also from Florian.
6) Add ct stats for clash resolution, from Florian Westphal.
7) Bump reference counter bump on ct clash resolution only,
this is safe because bucket lock is held, again from Florian.
8) Use ip_is_fragment() in xt_HMARK, from YueHaibing.
9) Add wildcard support for nft_socket, from Balazs Scheidler.
10) Remove superfluous IPVS dependency on iptables, from
Yaroslav Bolyukin.
11) Remove unused definition in ebt_stp, from Wang Hai.
12) Replace CONFIG_NFT_CHAIN_NAT_{IPV4,IPV6} by CONFIG_NFT_NAT
in selftests/net, from Fabian Frederick.
13) Add userdata support for nft_object, from Jose M. Guisado.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Wed, 9 Sep 2020 00:14:44 +0000 (17:14 -0700)]
net: ethernet/neterion/vxge: fix spelling of "functionality"
Fix typo/spello of "functionality".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Wed, 9 Sep 2020 00:13:25 +0000 (17:13 -0700)]
nfc: pn533/usb.c: fix spelling of "functions"
Fix typo/spello of "functions".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-nfc@lists.01.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Tue, 8 Sep 2020 21:29:02 +0000 (14:29 -0700)]
ipv6: add tos reflection in TCP reset and ack
Currently, ipv6 stack does not do any TOS reflection. To make the
behavior consistent with v4 stack, this commit adds TOS reflection in
tcp_v6_reqsk_send_ack() and tcp_v6_send_reset(). We clear the lower
2-bit ECN value of the received TOS in compliance with RFC 3168 6.1.5
robustness principles.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 Sep 2020 03:18:17 +0000 (20:18 -0700)]
Merge tag 'rxrpc-next-
20200908' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Allow more calls to same peer
Here are some development patches for AF_RXRPC that allow more simultaneous
calls to be made to the same peer with the same security parameters. The
current code allows a maximum of 4 simultaneous calls, which limits the afs
filesystem to that many simultaneous threads. This increases the limit to
16.
To make this work, the way client connections are limited has to be changed
(incoming call/connection limits are unaffected) as the current code
depends on queuing calls on a connection and then pushing the connection
through a queue. The limit is on the number of available connections.
This is changed such that there's a limit[*] on the total number of calls
systemwide across all namespaces, but the limit on the number of client
connections is removed.
Once a call is allowed to proceed, it finds a bundle of connections and
tries to grab a call slot. If there's a spare call slot, fine, otherwise
it will wait. If there's already a waiter, it will try to create another
connection in the bundle, unless the limit of 4 is reached (4 calls per
connection, giving 16).
A number of things throttle someone trying to set up endless connections:
- Calls that fail immediately have their conns deleted immediately,
- Calls that don't fail immediately have to wait for a timeout,
- Connections normally get automatically reaped if they haven't been used
for 2m, but this is sped up to 2s if the number of connections rises
over 900. This number is tunable by sysctl.
[*] Technically two limits - kernel sockets and userspace rxrpc sockets are
accounted separately.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Tue, 8 Sep 2020 20:27:47 +0000 (22:27 +0200)]
net: tc35815: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'tc35815_init_queues()' GFP_ATOMIC must be used
because it can be called from 'tc35815_restart()' where some spinlock are
taken.
The call chain is:
tc35815_restart
--> tc35815_clear_queues
--> tc35815_init_queues
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Tue, 8 Sep 2020 20:08:39 +0000 (22:08 +0200)]
hippi: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'rr_init_one()' GFP_KERNEL can be used because
it is a probe function and no spinlock is taken in the between.
When memory is allocated in 'rr_open()' GFP_KERNEL can be used because
it is a '.ndo_open' function (see struct net_device_ops) and no spinlock is
taken in the between.
'.ndo_open' functions are synchronized using the rtnl_lock() semaphore.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Tue, 8 Sep 2020 19:22:19 +0000 (20:22 +0100)]
sfc: coding style cleanups in mcdi_port_common.c
The code recently moved into this file contained a number of coding style
issues, about which checkpatch and xmastree complained. Fix them.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 8 Sep 2020 07:17:13 +0000 (10:17 +0300)]
net: bridge: mcast: fix unused br var when lockdep isn't defined
Stephen reported the following warning:
net/bridge/br_multicast.c: In function 'br_multicast_find_port':
net/bridge/br_multicast.c:1818:21: warning: unused variable 'br' [-Wunused-variable]
1818 | struct net_bridge *br = mp->br;
| ^~
It happens due to bridge's mlock_dereference() when lockdep isn't defined.
Silence the warning by annotating the variable as __maybe_unused.
Fixes:
0436862e417e ("net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES report")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Hai [Tue, 8 Sep 2020 14:05:43 +0000 (22:05 +0800)]
netlabel: Fix some kernel-doc warnings
Fixes the following W=1 kernel build warning(s):
net/netlabel/netlabel_calipso.c:438: warning: Excess function parameter 'audit_secid' description in 'calipso_doi_remove'
net/netlabel/netlabel_calipso.c:605: warning: Excess function parameter 'reg' description in 'calipso_req_delattr'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Hai [Tue, 8 Sep 2020 14:03:33 +0000 (22:03 +0800)]
net: wimax: i2400m: fix 'msg_skb' kernel-doc warning in i2400m_msg_to_dev()
Fixes the following W=1 kernel build warning(s):
drivers/net/wimax/i2400m/control.c:709: warning: Excess function parameter 'msg_skb' description in 'i2400m_msg_to_dev'
This parameter is not in use. Remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Hai [Tue, 8 Sep 2020 14:01:58 +0000 (22:01 +0800)]
bnx2x: Fix some kernel-doc warnings
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:4238: warning: Excess function parameter 'netdev' description in 'bnx2x_setup_tc'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:4238: warning: Excess function parameter 'tc' description in 'bnx2x_setup_tc'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Hai [Tue, 8 Sep 2020 13:59:15 +0000 (21:59 +0800)]
cipso: fix 'audit_secid' kernel-doc warning in cipso_ipv4.c
Fixes the following W=1 kernel build warning(s):
net/ipv4/cipso_ipv4.c:510: warning: Excess function parameter 'audit_secid' description in 'cipso_v4_doi_remove'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Xu [Tue, 8 Sep 2020 03:49:25 +0000 (11:49 +0800)]
net: smsc911x: Remove unused variables
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/smsc/smsc911x.c: In function ‘smsc911x_rx_fastforward’:
drivers/net/ethernet/smsc/smsc911x.c:1199:16: warning: variable ‘temp’ set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/smsc/smsc911x.c: In function ‘smsc911x_eeprom_write_location’:
drivers/net/ethernet/smsc/smsc911x.c:2058:6: warning: variable ‘temp’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 Sep 2020 02:51:41 +0000 (19:51 -0700)]
Merge branch 'net-hns3-misc-updates'
Huazhong Tan says:
====================
net: hns3: misc updates
There are some misc updates for the HNS3 ethernet driver.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Guojia Liao [Tue, 8 Sep 2020 02:59:54 +0000 (10:59 +0800)]
net: hns3: remove some unused function hns3_update_promisc_mode()
hns3_update_promisc_mode is defined, but not be used, so remove it.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Tue, 8 Sep 2020 02:59:53 +0000 (10:59 +0800)]
net: hns3: remove some unused macros related to queue
There are several macros related queue defined, but never
used, so remove them.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Tue, 8 Sep 2020 02:59:52 +0000 (10:59 +0800)]
net: hns3: remove unused field 'tc_num_last_time' in struct hclge_dev
'tc_num_last_time' is defined, but never used, so remove it.
Reported-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Tue, 8 Sep 2020 02:59:51 +0000 (10:59 +0800)]
net: hns3: remove unused field 'io_base' in struct hns3_enet_ring
'io_base' has been defined and initialized, but never used,
so remove it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Tue, 8 Sep 2020 02:59:50 +0000 (10:59 +0800)]
net: hns3: fix a typo in struct hclge_mac
The member link of struct hclge_mac stores the link status of
MAC and PHY if PHY exists, but its annotation uses word "exit",
so fix it.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Tue, 8 Sep 2020 02:59:49 +0000 (10:59 +0800)]
net: hns3: skip periodic service task if reset failed
When reset fails, if there are some pending jobs for the periodic
service task, it does not do anything except print error each
time the task is scheduled. So skip the periodic service task if
reset failed.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Tue, 8 Sep 2020 02:59:48 +0000 (10:59 +0800)]
net: hns3: narrow two local variable range in hclgevf_reset_prepare_wait()
Since variable send_msg and ret only used in if branch, so move
their definition into the if branch.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Rix [Mon, 7 Sep 2020 18:04:38 +0000 (11:04 -0700)]
net: sched: skip an unnecessay check
Reviewing the error handling in tcf_action_init_1()
most of the early handling uses
err_out:
if (cookie) {
kfree(cookie->data);
kfree(cookie);
}
before cookie could ever be set.
So skip the unnecessay check.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 2 Jul 2020 23:39:47 +0000 (00:39 +0100)]
rxrpc: Allow multiple client connections to the same peer
Allow the number of parallel connections to a machine to be expanded from a
single connection to a maximum of four. This allows up to 16 calls to be
in progress at the same time to any particular peer instead of 4.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Wed, 1 Jul 2020 10:15:32 +0000 (11:15 +0100)]
rxrpc: Rewrite the client connection manager
Rewrite the rxrpc client connection manager so that it can support multiple
connections for a given security key to a peer. The following changes are
made:
(1) For each open socket, the code currently maintains an rbtree with the
connections placed into it, keyed by communications parameters. This
is tricky to maintain as connections can be culled from the tree or
replaced within it. Connections can require replacement for a number
of reasons, e.g. their IDs span too great a range for the IDR data
type to represent efficiently, the call ID numbers on that conn would
overflow or the conn got aborted.
This is changed so that there's now a connection bundle object placed
in the tree, keyed on the same parameters. The bundle, however, does
not need to be replaced.
(2) An rxrpc_bundle object can now manage the available channels for a set
of parallel connections. The lock that manages this is moved there
from the rxrpc_connection struct (channel_lock).
(3) There'a a dummy bundle for all incoming connections to share so that
they have a channel_lock too. It might be better to give each
incoming connection its own bundle. This bundle is not needed to
manage which channels incoming calls are made on because that's the
solely at whim of the client.
(4) The restrictions on how many client connections are around are
removed. Instead, a previous patch limits the number of client calls
that can be allocated. Ordinarily, client connections are reaped
after 2 minutes on the idle queue, but when more than a certain number
of connections are in existence, the reaper starts reaping them after
2s of idleness instead to get the numbers back down.
It could also be made such that new call allocations are forced to
wait until the number of outstanding connections subsides.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 2 Jul 2020 13:59:46 +0000 (14:59 +0100)]
rxrpc: Impose a maximum number of client calls
Impose a maximum on the number of client rxrpc calls that are allowed
simultaneously. This will be in lieu of a maximum number of client
connections as this is easier to administed as, unlike connections, calls
aren't reusable (to be changed in a subsequent patch)..
This doesn't affect the limits on service calls and connections.
Signed-off-by: David Howells <dhowells@redhat.com>
Jose M. Guisado Gomez [Tue, 8 Sep 2020 11:01:41 +0000 (13:01 +0200)]
netfilter: nf_tables: add userdata support for nft_object
Enables storing userdata for nft_object. Initially this will store an
optional comment but can be extended in the future as needed.
Adds new attribute NFTA_OBJ_USERDATA to nft_object.
Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fabian Frederick [Mon, 7 Sep 2020 16:14:28 +0000 (18:14 +0200)]
selftests/net: replace obsolete NFT_CHAIN configuration
Replace old parameters with global NFT_NAT from commit
db8ab38880e0
("netfilter: nf_tables: merge ipv4 and ipv6 nat chain types")
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Wang Hai [Fri, 4 Sep 2020 12:56:53 +0000 (20:56 +0800)]
netfilter: ebt_stp: Remove unused macro BPDU_TYPE_TCN
BPDU_TYPE_TCN is never used after it was introduced.
So better to remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Vladimir Oltean [Mon, 7 Sep 2020 23:25:56 +0000 (02:25 +0300)]
net: dsa: don't print non-fatal MTU error if not supported
Commit
72579e14a1d3 ("net: dsa: don't fail to probe if we couldn't set
the MTU") changed, for some reason, the "err && err != -EOPNOTSUPP"
check into a simple "err". This causes the MTU warning to be printed
even for drivers that don't have the MTU operations implemented.
Fix that.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Sep 2020 23:06:56 +0000 (02:06 +0300)]
net: dsa: change PHY error message again
slave_dev->name is only populated at this stage if it was specified
through a label in the device tree. However that is not mandatory.
When it isn't, the error message looks like this:
[ 5.037057] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d
[ 5.044672] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d
[ 5.052275] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d
[ 5.059877] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d
which is especially confusing since the error gets printed on behalf of
the DSA master (fsl_enetc in this case).
Printing an error message that contains a valid reference to the DSA
port's name is difficult at this point in the initialization stage, so
at least we should print some info that is more reliable, even if less
user-friendly. That may be the driver name and the hardware port index.
After this change, the error is printed as:
[ 6.051587] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 0
[ 6.061192] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 1
[ 6.070765] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 2
[ 6.080324] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 3
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 3 Sep 2020 23:14:31 +0000 (16:14 -0700)]
net: tighten the definition of interface statistics
This patch is born out of an investigation into which IEEE statistics
correspond to which struct rtnl_link_stats64 members. Turns out that
there seems to be reasonable consensus on the matter, among many drivers.
To save others the time (and it took more time than I'm comfortable
admitting) I'm adding comments referring to IEEE attributes to
struct rtnl_link_stats64.
Up until now we had two forms of documentation for stats - in
Documentation/ABI/testing/sysfs-class-net-statistics and the comments
on struct rtnl_link_stats64 itself. While the former is very cautious
in defining the expected behavior, the latter feel quite dated and
may not be easy to understand for modern day driver author
(e.g. rx_over_errors). At the same time modern systems are far more
complex and once obvious definitions lost their clarity. For example
- does rx_packet count at the MAC layer (aFramesReceivedOK)?
packets processed correctly by hardware? received by the driver?
or maybe received by the stack?
I tried to clarify the expectations, further clarifications from
others are very welcome.
The part hardest to untangle is rx_over_errors vs rx_fifo_errors
vs rx_missed_errors. After much deliberation I concluded that for
modern HW only two of the counters will make sense. The distinction
between internal FIFO overflow and packets dropped due to back-pressure
from the host is likely too implementation (driver and device) specific
to expose in the standard stats.
Now - which two of those counters we select to use is anyone's pick:
sysfs documentation suggests rx_over_errors counts packets which
did not fit into buffers due to MTU being too small, which I reused.
There don't seem to be many modern drivers using it (well, CAN drivers
seem to love this statistic).
Of the remaining two I picked rx_missed_errors to report device drops.
bnxt reports it and it's folded into "drop"s in procfs (while
rx_fifo_errors is an error, and modern devices usually receive the frame
OK, they just can't admit it into the pipeline).
Of the drivers I looked at only AMD Lance-like and NS8390-like use all
three of these counters. rx_missed_errors counts missed frames,
rx_over_errors counts overflow events, and rx_fifo_errors counts frames
which were truncated because they didn't fit into buffers. This suggests
that rx_fifo_errors may be the correct stat for truncated packets, but
I'd think a FIFO stat counting truncated packets would be very confusing
to a modern reader.
v2:
- add driver developer notes about ethtool stat count and reset
- replace Ethernet with IEEE 802.3 to better indicate source of attrs
- mention byte counters don't count FCS
- clarify RX counter is from device to host
- drop "sightly" from sysfs paragraph
- add examples of ethtool stats
- s/incoming/received/ s/incoming/transmitted/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wang Hai [Fri, 4 Sep 2020 13:08:37 +0000 (21:08 +0800)]
rxrpc: Remove unused macro rxrpc_min_rtt_wlen
rxrpc_min_rtt_wlen is never used after it was introduced.
So better to remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 7 Sep 2020 21:49:14 +0000 (14:49 -0700)]
Merge branch 'sfc-ethtool-for-EF100-and-related-improvements'
Edward Cree says:
====================
sfc: ethtool for EF100 and related improvements
This series adds the ethtool support to the EF100 driver that was held
back from the original submission as the lack of phy_ops caused issues.
Patch #2, removing the phy_op indirection, deals with this. There are a
lot of checkpatch warnings / xmastree violations but they're all in
pure code movement so I've left the code as it is.
While patch #1 is technically a fix and possibly could go to 'net', I've
put it in this series since it only becomes triggerable with the added
'ethtool --reset' support.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Mon, 7 Sep 2020 16:15:48 +0000 (17:15 +0100)]
sfc: simplify DMA mask setting
Christoph says[1] that dma_set_mask_and_coherent() is smart enough to
truncate the mask itself if it's too long. So we can get rid of our
"lop off one bit and retry" loop in efx_init_io().
[1]: https://www.spinics.net/lists/netdev/msg677266.html
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Mon, 7 Sep 2020 16:15:18 +0000 (17:15 +0100)]
sfc: remove EFX_DRIVER_VERSION
Per-module versions for in-tree drivers are deprecated.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Mon, 7 Sep 2020 16:15:08 +0000 (17:15 +0100)]
sfc: handle limited FEC support
If the reported PHY capabilities do not include a given FEC mode, don't
attempt to select that FEC mode anyway. If the user tries to set a mode
through ethtool that is not supported, return an error.
The _REQUESTED bits don't appear in the supported caps, but are implied
by the corresponding FEC bits.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Mon, 7 Sep 2020 16:14:52 +0000 (17:14 +0100)]
sfc: add ethtool ops and miscellaneous ndos to EF100
Mostly just calls to existing common functions.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Mon, 7 Sep 2020 16:14:34 +0000 (17:14 +0100)]
sfc: remove phy_op indirection
Originally there were several implementations of PHY operations for the
several different PHYs used on Falcon boards. But Falcon is now in a
separate driver, and all sfc NICs since then have had MCDI-managed PHYs.
Thus, there is no need to indirect through function pointers in
efx->phy_op; we can simply call the efx_mcdi_phy_* functions directly.
This also hooks up these functions for EF100, which was previously using
the dummy_phy_ops.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Mon, 7 Sep 2020 16:14:20 +0000 (17:14 +0100)]
sfc: don't double-down() filters in ef100_reset()
dev_close(), by way of ef100_net_stop(), already brings down the filter
table, so there's no need to do it again (which just causes lots of
WARN_ONs).
Similarly, don't bring it up ourselves, as dev_open() -> ef100_net_open()
will do it, and will fail if it's already been brought up.
Fixes:
a9dc3d5612ce ("sfc_ef100: RX filter table management and related gubbins")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wang Hai [Mon, 7 Sep 2020 14:12:07 +0000 (22:12 +0800)]
net: ethernet: dnet: Remove set but unused variable 'len'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/dnet.c: In function dnet_start_xmit
drivers/net/ethernet/dnet.c:511:15: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
commit
4796417417a6 ("dnet: Dave DNET ethernet controller driver (updated)")
involved this unused variable, remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhang Changzhong [Mon, 7 Sep 2020 12:46:54 +0000 (20:46 +0800)]
net: ethernet: dwmac: remove redundant null check before clk_disable_unprepare()
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhang Changzhong [Mon, 7 Sep 2020 12:49:44 +0000 (20:49 +0800)]
net: ethernet: fec: remove redundant null check before clk_disable_unprepare()
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhang Changzhong [Mon, 7 Sep 2020 12:57:24 +0000 (20:57 +0800)]
net: stmmac: remove redundant null check before clk_disable_unprepare()
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhang Changzhong [Mon, 7 Sep 2020 13:02:03 +0000 (21:02 +0800)]
net: xilinx: remove redundant null check before clk_disable_unprepare()
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 7 Sep 2020 20:16:48 +0000 (13:16 -0700)]
Merge branch 'net-bridge-mcast-initial-IGMPv3-MLDv2-support-part-1'
Nikolay Aleksandrov says:
====================
net: bridge: mcast: initial IGMPv3/MLDv2 support (part 1)
This patch-set implements the control plane for initial IGMPv3/MLDv2
support which takes care of include/exclude sets and state transitions
based on the different report types.
Patch 01 arranges the structure better by moving the frequently used
fields together, patch 02 factors out the port group deletion code which is
used in a few places. Patches 03 and 04 add support for source lists and
group modes per port group which are dumped. Patch 05 adds support for
group-and-source specific queries required for IGMPv3/MLDv2. Then patch 06
adds support for group and group-and-source query retransmissions via a new
rexmit timer. Patches 07 and 08 make use of the already present mdb fill
functions when sending notifications so we can have the full mdb entries'
state filled in (with sources, mode etc). Patch 09 takes care of port group
expiration, it switches the group mode to include and deletes it if there
are no sources with active timers. Patches 10-13 are the core changes which
add support for IGMPv3/MLDv2 reports and handle the source list set
operations as per RFCs 3376 and 3810, all IGMPv3/MLDv2 report types with
their transitions should be supported after these patches. I've used RFCs
3376, 3810 and FRR as a reference implementation. The source lists are
capped at 32 entries, we can remove that limitation at a later point which
would require a better data structure to hold them. IGMPv3 processing is
hidden behind the bridge's multicast_igmp_version option which must be set
to 3 in order to enable it. MLDv2 processing is hidden behind the bridge's
multicast_mld_version which must be set to 2 in order to enable it.
Patch 14 improves other querier processing a bit (more about this below).
And finally patch 15 transforms the src gc so it can be used with all mcast
objects since now we have multiple timers that can be running and we
need to make sure they have all finished before freeing the objects.
This is part 1, it only adds control plane support and doesn't change
the fast path. A following patch-set will take care of that.
Here're the sets that will come next (in order):
- Fast path patch-set which adds support for (S, G) mdb entries needed
for IGMPv3/MLDv2 forwarding, entry add source (kernel, user-space etc)
needed for IGMPv3/MLDv2 entry management, entry block mode needed for
IGMPv3/MLDv2 exclude mode. This set will also add iproute2 support for
manipulating and showing all the new state.
- Selftests patches which will verify all state transitions and forwarding
- Explicit host tracking patch-set, needed for proper fast leave and
with it fast leave will be enabled for IGMPv3/MLDv2
Not implemented yet:
- Host IGMPv3/MLDv2 filter support (currently we handle only join/leave
as before)
- Proper other querier source timer and value updates
- IGMPv3/v2 MLDv2/v1 compat (I have a few rough patches for this one)
v4: move old patch 05 to 02 (group del patch), before src lists
patch 02: set pg's fast leave flag when deleting due to fast leave
patch 03: now can use the new port del function
add igmpv2/mldv1 bool which are set when the entry is
added in those modes (later will be passed as update_timer)
patch 10: rename update_timer to igmpv2_mldv1 and use the passed
value from br_multicast_add_group's callers
v3: add IPv6/MLDv2 support, most patches are changed
v2:
patches 03-04: make src lists RCU friendly so they can be traversed
when dumping, reduce limit to a more conservative 32
src group entries for a start
patches 11-13: remove helper and directly do bitops
patch 15: force mcast gc on bridge port del to make sure port
group timers have finished before freeing the port
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 7 Sep 2020 09:56:19 +0000 (12:56 +0300)]
net: bridge: mcast: destroy all entries via gc
Since each entry type has timers that can be running simultaneously we need
to make sure that entries are not freed before their timers have finished.
In order to do that generalize the src gc work to mcast gc work and use a
callback to free the entries (mdb, port group or src).
v3: add IPv6 support
v2: force mcast gc on port del to make sure all port group timers have
finished before freeing the bridge port
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 7 Sep 2020 09:56:18 +0000 (12:56 +0300)]
net: bridge: mcast: improve IGMPv3/MLDv2 query processing
When an IGMPv3/MLDv2 query is received and we're operating in such mode
then we need to avoid updating group timers if the suppress flag is set.
Also we should update only timers for groups in exclude mode.
v3: add IPv6/MLDv2 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 7 Sep 2020 09:56:17 +0000 (12:56 +0300)]
net: bridge: mcast: support for IGMPV3/MLDv2 BLOCK_OLD_SOURCES report
We already have all necessary helpers, so process IGMPV3/MLDv2
BLOCK_OLD_SOURCES as per the RFCs.
v3: add IPv6/MLDv2 support
v2: directly do flag bit operations
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 7 Sep 2020 09:56:16 +0000 (12:56 +0300)]
net: bridge: mcast: support for IGMPV3/MLDv2 CHANGE_TO_INCLUDE/EXCLUDE report
In order to process IGMPV3/MLDv2 CHANGE_TO_INCLUDE/EXCLUDE report types we
need new helpers which allow us to mark entries based on their timer
state and to query only marked entries.
v3: add IPv6/MLDv2 support, fix other_query checks
v2: directly do flag bit operations
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 7 Sep 2020 09:56:15 +0000 (12:56 +0300)]
net: bridge: mcast: support for IGMPV3/MLDv2 MODE_IS_INCLUDE/EXCLUDE report
In order to process IGMPV3/MLDv2_MODE_IS_INCLUDE/EXCLUDE report types we
need some new helpers which allow us to set/clear flags for all current
entries and later delete marked entries after the report sources have been
processed.
v3: add IPv6/MLDv2 support
v2: drop flag helpers and directly do flag bit operations
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 7 Sep 2020 09:56:14 +0000 (12:56 +0300)]
net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES report
This patch adds handling for the ALLOW_NEW_SOURCES IGMPv3/MLDv2 report
types and limits them only when multicast_igmp_version == 3 or
multicast_mld_version == 2 respectively. Now that IGMPv3/MLDv2 handling
functions will be managing timers we need to delay their activation, thus
a new argument is added which controls if the timer should be updated.
We also disable host IGMPv3/MLDv2 handling as it's not yet implemented and
could cause inconsistent group state, the host can only join a group as
EXCLUDE {} or leave it.
v4: rename update_timer to igmpv2_mldv1 and use the passed value from
br_multicast_add_group's callers
v3: Add IPv6/MLDv2 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 7 Sep 2020 09:56:13 +0000 (12:56 +0300)]
net: bridge: mcast: delete expired port groups without srcs
If an expired port group is in EXCLUDE mode, then we have to turn it
into INCLUDE mode, remove all srcs with zero timer and finally remove
the group itself if there are no more srcs with an active timer.
For IGMPv2 use there would be no sources, so this will reduce to just
removing the group as before.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 7 Sep 2020 09:56:12 +0000 (12:56 +0300)]
net: bridge: mdb: use mdb and port entries in notifications
We have to use mdb and port entries when sending mdb notifications in
order to fill in all group attributes properly. Before this change we
would've used a fake br_mdb_entry struct to fill in only partial
information about the mdb. Now we can also reuse the mdb dump fill
function and thus have only a single central place which fills the mdb
attributes.
v3: add IPv6 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>