OSDN Git Service
Chad Dupuis [Thu, 16 Apr 2020 08:43:13 +0000 (01:43 -0700)]
scsi: qedf: Fix crash when MFW calls for protocol stats while function is still probing
The MFW may make a call to qed and then to qedf for protocol statistics
while the function is still probing. If this happens it's possible that
some members of the struct qedf_ctx may not be fully initialized which can
result in a NULL pointer dereference or general protection fault.
To prevent this, add a new flag call QEDF_PROBING and set it when the
__qedf_probe() function is active. Then in the qedf_get_protocol_tlv_data()
function we can check if the function is still probing and return
immediantely before any uninitialized structures can be touched.
Link: https://lore.kernel.org/r/20200416084314.18851-9-skashyap@marvell.com
Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chad Dupuis [Thu, 16 Apr 2020 08:43:12 +0000 (01:43 -0700)]
scsi: qedf: Add schedule recovery handler
Implement recovery handler to be used by QED to signal the need for
recovery to come out of an error condition like ramrod struck and firmware
context reset.
Link: https://lore.kernel.org/r/20200416084314.18851-8-skashyap@marvell.com
Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Saurav Kashyap [Thu, 16 Apr 2020 08:43:11 +0000 (01:43 -0700)]
scsi: qedf: Implement callback for bw_update
Add support for the common qed bw_update callback to qedf. This function
is called whenever there is a reported change in the bandwidth and updates
corresponding values in sysfs.
Link: https://lore.kernel.org/r/20200416084314.18851-7-skashyap@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sudarsana Reddy Kalluru [Thu, 16 Apr 2020 08:43:10 +0000 (01:43 -0700)]
scsi: qed: Send BW update notifications to the protocol drivers
Management firmware (MFW) sends a notification whenever there is a change
in the bandwidth values. Add driver support for sending this notification
to the upper layer drivers (e.g., qedf).
Link: https://lore.kernel.org/r/20200416084314.18851-6-skashyap@marvell.com
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Javed Hasan [Thu, 16 Apr 2020 08:43:09 +0000 (01:43 -0700)]
scsi: qedf: Honor status qualifier in FCP_RSP per spec
Handle scope and qualifier on SAM_STAT_TASK_SET_FULL or SAM_STAT_BUSY
[mkp: added braces to fix sparse complaint]
Link: https://lore.kernel.org/r/20200416084314.18851-5-skashyap@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Javed Hasan [Thu, 16 Apr 2020 08:43:08 +0000 (01:43 -0700)]
scsi: qedf: Acquire rport_lock for resetting the delay_timestamp
Retry delay timestamp is updated in queuecommand as well as in
qedf_scsi_completion routine. Protect it using lock.
Link: https://lore.kernel.org/r/20200416084314.18851-4-skashyap@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Javed Hasan [Thu, 16 Apr 2020 08:43:07 +0000 (01:43 -0700)]
scsi: qedf: Increase the upper limit of retry delay
Max time to hold the IO in case of SAM_STAT_TASK_SET_FULL or SAM_STAT_BUSY.
Link: https://lore.kernel.org/r/20200416084314.18851-3-skashyap@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Saurav Kashyap [Thu, 16 Apr 2020 08:43:06 +0000 (01:43 -0700)]
scsi: qedf: Keep track of num of pending flogi
If a port is brought down for an extended period of time, the fipvlan
counter gets exhausted and the driver will fall back to default VLAN 1002
and call fcoe_ctlr_link_up to log in. However, the switch will discard the
FLOGI attempt because the VLAN is now different.
Keep track of the number of FLOGI attempts and if a threshold of
QEDF_FLOGI_RETRY_CNT is exceeded, perform a context soft reset.
Link: https://lore.kernel.org/r/20200416084314.18851-2-skashyap@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Wed, 15 Apr 2020 08:50:53 +0000 (16:50 +0800)]
scsi: mvsas: remove unused symbol 'mvs_th'
This symbol has no users so remove it.
Link: https://lore.kernel.org/r/20200415085053.7633-1-yanaijie@huawei.com
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Wed, 15 Apr 2020 08:50:44 +0000 (16:50 +0800)]
scsi: mvsas: make mvst_host_attrs static
Fix the following sparse warning:
drivers/scsi/mvsas/mv_init.c:28:25: warning: symbol 'mvst_host_attrs' was
not declared. Should it be static?
Link: https://lore.kernel.org/r/20200415085044.7460-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Wed, 15 Apr 2020 08:50:29 +0000 (16:50 +0800)]
scsi: qedi: make qedi_ll2_buf_size static
Fix the following sparse warning:
drivers/scsi/qedi/qedi_main.c:44:6: warning: symbol 'qedi_ll2_buf_size' was
not declared. Should it be static?
Link: https://lore.kernel.org/r/20200415085029.7170-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Asutosh Das [Tue, 14 Apr 2020 06:14:48 +0000 (23:14 -0700)]
scsi: ufs: full reinit upon resume if link was off
During suspend, if the link is put to off, it would require a full
initialization during resume. This patch resets and restores both the host
and the card during initialization, otherwise host-only reset and restore
would fail occasionally.
Link: https://lore.kernel.org/r/1586844892-22720-1-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Wed, 15 Apr 2020 09:38:09 +0000 (17:38 +0800)]
scsi: fnic: make vnic_wq_get_ctrl and vnic_wq_alloc_ring static
Fix the following sparse warning:
drivers/scsi/fnic/vnic_wq.c:28:5: warning: symbol 'vnic_wq_get_ctrl' was
not declared. Should it be static?
drivers/scsi/fnic/vnic_wq.c:40:5: warning: symbol 'vnic_wq_alloc_ring'
was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200415093809.9365-3-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Wed, 15 Apr 2020 09:38:08 +0000 (17:38 +0800)]
scsi: fnic: make fnic_list and fnic_list_lock static
Fix the following sparse warning:
drivers/scsi/fnic/fnic_main.c:52:1: warning: symbol 'fnic_list' was not
declared. Should it be static?
drivers/scsi/fnic/fnic_main.c:53:1: warning: symbol 'fnic_list_lock' was
not declared. Should it be static?
Link: https://lore.kernel.org/r/20200415093809.9365-2-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Wed, 15 Apr 2020 09:38:07 +0000 (17:38 +0800)]
scsi: fnic: make some symbols static
Fix the following sparse warning:
drivers/scsi/fnic/vnic_dev.c:257:5: warning: symbol 'vnic_dev_cmd1' was
not declared. Should it be static?
drivers/scsi/fnic/vnic_dev.c:319:5: warning: symbol 'vnic_dev_cmd2' was
not declared. Should it be static?
drivers/scsi/fnic/vnic_dev.c:414:5: warning: symbol
'vnic_dev_init_devcmd1' was not declared. Should it be static?
drivers/scsi/fnic/vnic_dev.c:425:5: warning: symbol
'vnic_dev_init_devcmd2' was not declared. Should it be static?
drivers/scsi/fnic/vnic_dev.c:495:6: warning: symbol
'vnic_dev_deinit_devcmd2' was not declared. Should it be static?
drivers/scsi/fnic/vnic_dev.c:506:5: warning: symbol
'vnic_dev_cmd_no_proxy' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200415093809.9365-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jules Irenge [Sat, 11 Apr 2020 00:19:30 +0000 (01:19 +0100)]
scsi: libsas: Add missing annotation for sas_ata_qc_issue()
Sparse reports a warning at sas_ata_qc_issue()
warning: context imbalance in sas_ata_qc_issue() - unexpected unlock
The root cause is the missing annotation at sas_ata_qc_issue()
Add the missing __must_hold(ap->lock) annotation
Link: https://lore.kernel.org/r/20200411001933.10072-7-jbi.octave@gmail.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Mon, 13 Apr 2020 08:28:22 +0000 (16:28 +0800)]
scsi: ipr: remove unneeded semicolon
Fix the following coccicheck warning:
drivers/scsi/ipr.c:1167:2-3: Unneeded semicolon
Link: https://lore.kernel.org/r/20200413082822.24356-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Thu, 9 Apr 2020 08:49:10 +0000 (16:49 +0800)]
scsi: qla1280: make qla1280_firmware_mutex and qla1280_fw_tbl static
Fix the following sparse warning:
drivers/scsi/qla1280.c:529:1: warning: symbol 'qla1280_firmware_mutex'
was not declared. Should it be static?
drivers/scsi/qla1280.c:538:15: warning: symbol 'qla1280_fw_tbl' was not
declared. Should it be static?
Link: https://lore.kernel.org/r/20200409084910.44336-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Tue, 7 Apr 2020 09:28:27 +0000 (17:28 +0800)]
scsi: megaraid: make two symbols static in megaraid_sas_base.c
Fix the following sparse warning:
drivers/scsi/megaraid/megaraid_sas_base.c:84:5: warning: symbol
'rdpq_enable' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_base.c:92:14: warning: symbol
'scmd_timeout' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200407092827.18074-5-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Tue, 7 Apr 2020 09:28:26 +0000 (17:28 +0800)]
scsi: megaraid: make some symbols static in megaraid_sas_fusion.c
Fix the following sparse warning:
drivers/scsi/megaraid/megaraid_sas_fusion.c:180:1: warning: symbol
'megasas_enable_intr_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:202:1: warning: symbol
'megasas_disable_intr_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:4233:6: warning: symbol
'megasas_refire_mgmt_cmd' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200407092827.18074-4-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Tue, 7 Apr 2020 09:28:25 +0000 (17:28 +0800)]
scsi: megaraid: make some symbols static in megaraid_sas_fp.c
Fix the following sparse warning:
drivers/scsi/megaraid/megaraid_sas_fp.c:88:5: warning: symbol
'mega_div64_32' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fp.c:370:5: warning: symbol
'MR_GetSpanBlock' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fp.c:420:5: warning: symbol
'mr_spanset_get_span_block' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fp.c:645:4: warning: symbol 'get_arm'
was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fp.c:788:4: warning: symbol
'MR_GetPhyParams' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fp.c:1345:4: warning: symbol
'megasas_get_best_arm_pd' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200407092827.18074-3-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Tue, 7 Apr 2020 09:28:24 +0000 (17:28 +0800)]
scsi: megaraid: make two symbols static in megaraid_mbox.c
Fix the following sparse warning:
drivers/scsi/megaraid/megaraid_mbox.c:305:5: warning: symbol
'dev_attr_megaraid_mbox_app_hndl' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_mbox.c:315:5: warning: symbol
'dev_attr_megaraid_mbox_ld' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200407092827.18074-2-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Tue, 7 Apr 2020 03:22:02 +0000 (11:22 +0800)]
scsi: bfa: bfad.c: make max_rport_logins static
Fix the following sparse warning:
drivers/scsi/bfa/bfad.c:53:17: warning: symbol 'max_rport_logins' was
not declared. Should it be static?
Link: https://lore.kernel.org/r/20200407032202.36789-8-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Tue, 7 Apr 2020 03:22:01 +0000 (11:22 +0800)]
scsi: bfa: bfad_attr.c: make two funcitons static
Fix the following sparse warning:
drivers/scsi/bfa/bfad_attr.c:441:1: warning: symbol
'bfad_im_issue_fc_host_lip' was not declared. Should it be static?
drivers/scsi/bfa/bfad_attr.c:566:1: warning: symbol
'bfad_im_vport_set_symbolic_name' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200407032202.36789-7-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Tue, 7 Apr 2020 03:22:00 +0000 (11:22 +0800)]
scsi: bfa: bfa_ioc_ct.c: make two funcitons static
Fix the following sparse warning:
drivers/scsi/bfa/bfa_ioc_ct.c:368:1: warning: symbol
'bfa_ioc_ct2_lpu_read_stat' was not declared. Should it be static?
drivers/scsi/bfa/bfa_ioc_ct.c:748:1: warning: symbol
'bfa_ioc_ct2_mac_reset' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200407032202.36789-6-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Tue, 7 Apr 2020 03:21:59 +0000 (11:21 +0800)]
scsi: bfa: bfa_fcs_lport.c: make bfa_fcport_get_loop_attr() static
Fix the following sparse warning:
drivers/scsi/bfa/bfa_fcs_lport.c:1287:1: warning: symbol
'bfa_fcport_get_loop_attr' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200407032202.36789-5-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Tue, 7 Apr 2020 03:21:58 +0000 (11:21 +0800)]
scsi: bfa: bfa_fcpim.c: make two functions static
Fix the following sparse warning:
drivers/scsi/bfa/bfa_fcpim.c:440:1: warning: symbol
'bfa_ioim_profile_comp' was not declared. Should it be static?
drivers/scsi/bfa/bfa_fcpim.c:457:1: warning: symbol
'bfa_ioim_profile_start' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200407032202.36789-4-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Tue, 7 Apr 2020 03:21:57 +0000 (11:21 +0800)]
scsi: bfa: bfa_core.c: make bfa_isr_rspq() static
Fix the following sparse warning:
drivers/scsi/bfa/bfa_core.c:712:1: warning: symbol 'bfa_isr_rspq' was
not declared. Should it be static?
Link: https://lore.kernel.org/r/20200407032202.36789-3-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Tue, 7 Apr 2020 03:21:56 +0000 (11:21 +0800)]
scsi: bfa: bfa_svc.c: make two functions static
Fix the following sparse warning:
drivers/scsi/bfa/bfa_svc.c:4288:1: warning: symbol
'bfa_fcport_ddportenable' was not declared. Should it be static?
drivers/scsi/bfa/bfa_svc.c:4297:1: warning: symbol
'bfa_fcport_ddportdisable' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200407032202.36789-2-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Wang Hai [Tue, 7 Apr 2020 16:21:14 +0000 (12:21 -0400)]
scsi: gdth: Make __gdth_execute static
Fix sparse warning:
drivers/scsi/gdth.c:332:5: warning:
symbol '__gdth_execute' was not declared. Should it be static?
Link: https://lore.kernel.org/r/1586276474-34480-1-git-send-email-wanghai38@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 13 Apr 2020 02:13:59 +0000 (19:13 -0700)]
scsi: qla2xxx: Use ARRAY_SIZE() instead of open-coding it
This patch does not change any functionality.
Link: https://lore.kernel.org/r/20200413021359.21725-1-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Sun, 5 Apr 2020 22:59:05 +0000 (15:59 -0700)]
scsi: qla2xxx: Split qla2x00_configure_local_loop()
The size of the function qla2x00_configure_local_loop() hurts its
readability. Hence split that function. This patch does not change any
functionality.
Link: https://lore.kernel.org/r/20200405225905.17171-1-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nilesh Javali [Wed, 8 Apr 2020 06:43:32 +0000 (23:43 -0700)]
scsi: qedi: Fix termination timeouts in session logout
The destroy connection ramrod timed out during session logout. Fix the
wait delay for graceful vs abortive termination as per the FW requirements.
Link: https://lore.kernel.org/r/20200408064332.19377-7-mrangankar@marvell.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manish Rangankar [Wed, 8 Apr 2020 06:43:31 +0000 (23:43 -0700)]
scsi: qedi: Add modules param to enable qed iSCSI debug
Add module parameter to enable debug messages specific to iSCSI functions.
Link: https://lore.kernel.org/r/20200408064332.19377-6-mrangankar@marvell.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nilesh Javali [Wed, 8 Apr 2020 06:43:30 +0000 (23:43 -0700)]
scsi: qedi: Do not flush offload work if ARP not resolved
For an unreachable target, offload_work is not initialized and the endpoint
state is set to OFLDCONN_NONE. This results in a WARN_ON due to the check
of the work function field being set to zero.
------------[ cut here ]------------
WARNING: CPU: 24 PID: 18587 at ../kernel/workqueue.c:3037 __flush_work+0x1c1/0x1d0
:
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 02/01/2020
RIP: 0010:__flush_work+0x1c1/0x1d0
Code: ba 6d 00 03 80 c9 f0 eb b6 48 c7 c7 20 ee 6c a4 e8 52 d3 04 00 0f 0b 31 c0 e9 d1 fe ff
ff 48 c7 c7 20 ee 6c a4 e8 3d d3 04 00 <0f> 0b 31 c0 e9 bc fe ff ff e8 11 f3 f
00 31 f6
RSP: 0018:
ffffac5a8cd47a80 EFLAGS:
00010282
RAX:
0000000000000024 RBX:
ffff98d68c1fcaf0 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
ffff98ce9fd99898 RDI:
ffff98ce9fd99898
RBP:
ffff98d68c1fcbc0 R08:
00000000000006fa R09:
0000000000000001
R10:
ffffac5a8cd47b50 R11:
0000000000000001 R12:
0000000000000000
R13:
000000000000489b R14:
ffff98d68c1fc800 R15:
ffff98d692132c00
FS:
00007f65f7f62280(0000) GS:
ffff98ce9fd80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007ffd2435e880 CR3:
0000000809334003 CR4:
00000000007606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
? class_create_release+0x40/0x40
? klist_put+0x2c/0x80
qedi_ep_disconnect+0xdd/0x400 [qedi]
iscsi_if_ep_disconnect.isra.20+0x59/0x70 [scsi_transport_iscsi]
iscsi_if_rx+0x129b/0x1670 [scsi_transport_iscsi]
? __netlink_lookup+0xe7/0x160
netlink_unicast+0x21d/0x300
netlink_sendmsg+0x30f/0x430
sock_sendmsg+0x5b/0x60
____sys_sendmsg+0x1e2/0x240
? copy_msghdr_from_user+0xd9/0x160
___sys_sendmsg+0x88/0xd0
? ___sys_recvmsg+0xa2/0xe0
? hrtimer_try_to_cancel+0x25/0x100
? do_nanosleep+0x9c/0x170
? __sys_sendmsg+0x5e/0xa0
__sys_sendmsg+0x5e/0xa0
do_syscall_64+0x60/0x1f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f65f6f16107
Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 aa d2 2b 00 48 63 d2 48
63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 8
0 00 00 00 00 53 48 89 f3 48
RSP: 002b:
00007ffd24367ca8 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
000055a7aeaaf110 RCX:
00007f65f6f16107
RDX:
0000000000000000 RSI:
00007ffd24367cc0 RDI:
0000000000000003
RBP:
0000000000000070 R08:
0000000000000000 R09:
0000000000000000
R10:
000000000000075c R11:
0000000000000246 R12:
00007ffd24367cc0
R13:
000055a7ae560008 R14:
00007ffd24367db0 R15:
0000000000000000
---[ end trace
54f499c05d41f8bb ]---
Only flush if the connection endpoint state if different from
OFLDCONN_NONE.
[mkp: clarified commit desc]
Link: https://lore.kernel.org/r/20200408064332.19377-5-mrangankar@marvell.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manish Rangankar [Wed, 8 Apr 2020 06:43:29 +0000 (23:43 -0700)]
scsi: qedi: Use correct msix count for fastpath vectors
Use MSI-X count provided by qed.
Link: https://lore.kernel.org/r/20200408064332.19377-4-mrangankar@marvell.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manish Rangankar [Wed, 8 Apr 2020 06:43:28 +0000 (23:43 -0700)]
scsi: qedi: Avoid unnecessary endpoint allocation on link down
No need to allocate and deallocate endpoint memory if the physical link is
down.
Link: https://lore.kernel.org/r/20200408064332.19377-3-mrangankar@marvell.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manish Rangankar [Wed, 8 Apr 2020 06:43:27 +0000 (23:43 -0700)]
scsi: qedi: Remove additional char from boot target iqnname
While parsing the iSCSI TLV data to MFW request, a newline was added to the
firmware boot target iqnname string. Because of this, we were getting the
following error even after the boot target was successfully logged in:
"[qedi_get_protocol_tlv_data:1197]:1: Boot target not set"
Remove the trailing newline.
[mkp: clarified commit desc]
Link: https://lore.kernel.org/r/20200408064332.19377-2-mrangankar@marvell.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Daniel Wagner [Fri, 3 Apr 2020 09:27:17 +0000 (11:27 +0200)]
scsi: qedf: Simplify mutex_unlock() usage
The commit
6d1368e8f987 ("scsi: qedf: fixup locking in
qedf_restart_rport()") introduced the lock. Though the lock protects
only the fc_rport_create() call. Thus, we can move the mutex unlock up
before the if statement and drop the else body.
Link: https://lore.kernel.org/r/20200403092717.19779-1-dwagner@suse.de
Cc: Hannes Reinecke <hare@suse.com>
Cc: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mauro Carvalho Chehab [Wed, 8 Apr 2020 15:46:15 +0000 (17:46 +0200)]
scsi: docs: fusion: get rid of a doc build warning
Use a table for the enum list, to avoid this warning:
./drivers/message/fusion/mptbase.c:5058: WARNING: Definition list ends without a blank line; unexpected unindent.
Link: https://lore.kernel.org/r/9ca049c2d25689c56448afddf4f0d1e619fa87f7.1586359676.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Linus Torvalds [Sun, 12 Apr 2020 19:35:55 +0000 (12:35 -0700)]
Linux 5.7-rc1
Linus Torvalds [Sun, 12 Apr 2020 18:04:58 +0000 (11:04 -0700)]
MAINTAINERS: sort field names for all entries
This sorts the actual field names too, potentially causing even more
chaos and confusion at merge time if you have edited the MAINTAINERS
file. But the end result is a more consistent layout, and hopefully
it's a one-time pain minimized by doing this just before the -rc1
release.
This was entirely scripted:
./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order
Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 12 Apr 2020 18:03:52 +0000 (11:03 -0700)]
MAINTAINERS: sort entries by entry name
They are all supposed to be sorted, but people who add new entries don't
always know the alphabet. Plus sometimes the entry names get edited,
and people don't then re-order the entry.
Let's see how painful this will be for merging purposes (the MAINTAINERS
file is often edited in various different trees), but Joe claims there's
relatively few patches in -next that touch this, and doing it just
before -rc1 is likely the best time. Fingers crossed.
This was scripted with
/scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS
but then I also ended up manually upper-casing a few entry names that
stood out when looking at the end result.
Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 12 Apr 2020 17:17:16 +0000 (10:17 -0700)]
Merge tag 'x86-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of three patches to fix the fallout of the newly added split
lock detection feature.
It addressed the case where a KVM guest triggers a split lock #AC and
KVM reinjects it into the guest which is not prepared to handle it.
Add proper sanity checks which prevent the unconditional injection
into the guest and handles the #AC on the host side in the same way as
user space detections are handled. Depending on the detection mode it
either warns and disables detection for the task or kills the task if
the mode is set to fatal"
* tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest
KVM: x86: Emulate split-lock access as a write in emulator
x86/split_lock: Provide handle_guest_split_lock()
Linus Torvalds [Sun, 12 Apr 2020 17:13:14 +0000 (10:13 -0700)]
Merge tag 'timers-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip
Pull time(keeping) updates from Thomas Gleixner:
- Fix the time_for_children symlink in /proc/$PID/ so it properly
reflects that it part of the 'time' namespace
- Add the missing userns limit for the allowed number of time
namespaces, which was half defined but the actual array member was
not added. This went unnoticed as the array has an exessive empty
member at the end but introduced a user visible regression as the
output was corrupted.
- Prevent further silent ucount corruption by adding a BUILD_BUG_ON()
to catch half updated data.
* tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ucount: Make sure ucounts in /proc/sys/user don't regress again
time/namespace: Add max_time_namespaces ucount
time/namespace: Fix time_for_children symlink
Linus Torvalds [Sun, 12 Apr 2020 17:09:19 +0000 (10:09 -0700)]
Merge tag 'sched-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes/updates from Thomas Gleixner:
- Deduplicate the average computations in the scheduler core and the
fair class code.
- Fix a raise between runtime distribution and assignement which can
cause exceeding the quota by up to 70%.
- Prevent negative results in the imbalanace calculation
- Remove a stale warning in the workqueue code which can be triggered
since the call site was moved out of preempt disabled code. It's a
false positive.
- Deduplicate the print macros for procfs
- Add the ucmap values to the SCHED_DEBUG procfs output for completness
* tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Add task uclamp values to SCHED_DEBUG procfs
sched/debug: Factor out printing formats into common macros
sched/debug: Remove redundant macro define
sched/core: Remove unused rq::last_load_update_tick
workqueue: Remove the warning in wq_worker_sleeping()
sched/fair: Fix negative imbalance in imbalance calculation
sched/fair: Fix race between runtime distribution and assignment
sched/fair: Align rq->avg_idle and rq->avg_scan_cost
Linus Torvalds [Sun, 12 Apr 2020 17:05:24 +0000 (10:05 -0700)]
Merge tag 'perf-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Three fixes/updates for perf:
- Fix the perf event cgroup tracking which tries to track the cgroup
even for disabled events.
- Add Ice Lake server support for uncore events
- Disable pagefaults when retrieving the physical address in the
sampling code"
* tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Disable page faults when getting phys address
perf/x86/intel/uncore: Add Ice Lake server uncore support
perf/cgroup: Correct indirection in perf_less_group_idx()
perf/core: Fix event cgroup tracking
Linus Torvalds [Sun, 12 Apr 2020 16:47:10 +0000 (09:47 -0700)]
Merge tag 'locking-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Three small fixes/updates for the locking core code:
- Plug a task struct reference leak in the percpu rswem
implementation.
- Document the refcount interaction with PID_MAX_LIMIT
- Improve the 'invalid wait context' data dump in lockdep so it
contains all information which is required to decode the problem"
* tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Improve 'invalid wait context' splat
locking/refcount: Document interaction with PID_MAX_LIMIT
locking/percpu-rwsem: Fix a task_struct refcount
Linus Torvalds [Sun, 12 Apr 2020 16:41:01 +0000 (09:41 -0700)]
Merge tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Ten cifs/smb fixes:
- five RDMA (smbdirect) related fixes
- add experimental support for swap over SMB3 mounts
- also a fix which improves performance of signed connections"
* tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: enable swap on SMB3 mounts
smb3: change noisy error message to FYI
smb3: smbdirect support can be configured by default
cifs: smbd: Do not schedule work to send immediate packet on every receive
cifs: smbd: Properly process errors on ib_post_send
cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets
cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending
cifs: smbd: Check send queue size before posting a send
cifs: smbd: Merge code to track pending packets
cifs: ignore cached share root handle closing errors
Linus Torvalds [Sun, 12 Apr 2020 16:39:47 +0000 (09:39 -0700)]
Merge tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfix from Trond Myklebust:
"Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()"
* tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS: Fix RCU lock leakage
Linus Torvalds [Sat, 11 Apr 2020 18:38:44 +0000 (11:38 -0700)]
Merge tag 'nios2-v5.7-rc1' of git://git./linux/kernel/git/lftan/nios2
Pull nios2 updates from Ley Foon Tan:
- Remove nios2-dev@lists.rocketboards.org from MAINTAINERS
- remove 'resetvalue' property
- rename 'altr,gpio-bank-width' -> 'altr,ngpio'
- enable the common clk subsystem on Nios2
* tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
MAINTAINERS: Remove nios2-dev@lists.rocketboards.org
arch: nios2: remove 'resetvalue' property
arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio'
arch: nios2: Enable the common clk subsystem on Nios2
Linus Torvalds [Sat, 11 Apr 2020 18:34:36 +0000 (11:34 -0700)]
Merge tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix an integer truncation in dma_direct_get_required_mask
(Kishon Vijay Abraham)
- fix the display of dma mapping types (Grygorii Strashko)
* tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: fix displaying of dma allocation type
dma-direct: fix data truncation in dma_direct_get_required_mask()
Linus Torvalds [Sat, 11 Apr 2020 16:46:12 +0000 (09:46 -0700)]
Merge tag 'kbuild-v5.7-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
Sedat Dilek [Sat, 11 Apr 2020 13:29:43 +0000 (15:29 +0200)]
mailmap: Add Sedat Dilek (replacement for expired email address)
I do not longer work for credativ Germany.
Please, use my private email address instead.
This is for the case when people want to CC me on
patches sent from my old business email address.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trond Myklebust [Sat, 11 Apr 2020 15:37:18 +0000 (11:37 -0400)]
pNFS: Fix RCU lock leakage
Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking
the RCU lock.
Fixes:
a9901899b649 ("pNFS: Add infrastructure for cleaning up per-layout commit structures")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Xiaoyao Li [Fri, 10 Apr 2020 11:54:02 +0000 (13:54 +0200)]
KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest
Two types of #AC can be generated in Intel CPUs:
1. legacy alignment check #AC
2. split lock #AC
Reflect #AC back into the guest if the guest has legacy alignment checks
enabled or if split lock detection is disabled.
If the #AC is not a legacy one and split lock detection is enabled, then
invoke handle_guest_split_lock() which will either warn and disable split
lock detection for this task or force SIGBUS on it.
[ tglx: Switch it to handle_guest_split_lock() and rename the misnamed
helper function. ]
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de
Xiaoyao Li [Fri, 10 Apr 2020 11:54:01 +0000 (13:54 +0200)]
KVM: x86: Emulate split-lock access as a write in emulator
Emulate split-lock accesses as writes if split lock detection is on
to avoid #AC during emulation, which will result in a panic(). This
should never occur for a well-behaved guest, but a malicious guest can
manipulate the TLB to trigger emulation of a locked instruction[1].
More discussion can be found at [2][3].
[1] https://lkml.kernel.org/r/
8c5b11c9-58df-38e7-a514-
dc12d687b198@redhat.com
[2] https://lkml.kernel.org/r/
20200131200134.GD18946@linux.intel.com
[3] https://lkml.kernel.org/r/
20200227001117.GX9940@linux.intel.com
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.084300242@linutronix.de
Thomas Gleixner [Fri, 10 Apr 2020 11:54:00 +0000 (13:54 +0200)]
x86/split_lock: Provide handle_guest_split_lock()
Without at least minimal handling for split lock detection induced #AC,
VMX will just run into the same problem as the VMWare hypervisor, which
was reported by Kenneth.
It will inject the #AC blindly into the guest whether the guest is
prepared or not.
Provide a function for guest mode which acts depending on the host
SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a
warning, disable SLD and mark the task accordingly. Otherwise force
SIGBUS.
[ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115516.978037132@linutronix.de
Link: https://lkml.kernel.org/r/20200402123258.895628824@linutronix.de
Masahiro Yamada [Wed, 8 Apr 2020 18:29:19 +0000 (03:29 +0900)]
kbuild: fix comment about missing include guard detection
The keyword here is 'twice' to explain the trick.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Sat, 11 Apr 2020 00:57:48 +0000 (17:57 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:
- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
gup, hugetlb, pagemap, memremap)
- Various other things (hfs, ocfs2, kmod, misc, seqfile)
* akpm: (34 commits)
ipc/util.c: sysvipc_find_ipc() should increase position index
kernel/gcov/fs.c: gcov_seq_next() should increase position index
fs/seq_file.c: seq_read(): add info message about buggy .next functions
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
change email address for Pali Rohár
selftests: kmod: test disabling module autoloading
selftests: kmod: fix handling test numbers above 9
docs: admin-guide: document the kernel.modprobe sysctl
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
kmod: make request_module() return an error when autoloading is disabled
mm/memremap: set caching mode for PCI P2PDMA memory to WC
mm/memory_hotplug: add pgprot_t to mhp_params
powerpc/mm: thread pgprot_t through create_section_mapping()
x86/mm: introduce __set_memory_prot()
x86/mm: thread pgprot_t through init_memory_mapping()
mm/memory_hotplug: rename mhp_restrictions to mhp_params
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
mm/vma: introduce VM_ACCESS_FLAGS
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
...
Linus Torvalds [Sat, 11 Apr 2020 00:53:43 +0000 (17:53 -0700)]
Merge tag 'docs-5.7-2' of git://git.lwn.net/linux
Pull Documentation fixes from Jonathan Corbet:
"A handful of late-arriving fixes for the documentation tree"
* tag 'docs-5.7-2' of git://git.lwn.net/linux:
Documentation: android: binderfs: add 'stats' mount option
Documentation: driver-api/usb/writing_usb_driver.rst Updates documentation links
docs: driver-api: address duplicate label warning
Documentation: sysrq: fix RST formatting
docs: kernel-parameters.txt: Fix broken references
docs: kernel-parameters.txt: Remove nompx
docs: filesystems: fix typo in qnx6.rst
Linus Torvalds [Sat, 11 Apr 2020 00:50:01 +0000 (17:50 -0700)]
Merge tag 'for-linus-5.7-ofs1' of git://git./linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"A fix and two cleanups.
Fix:
- Christoph Hellwig noticed that some logic I added to
orangefs_file_read_iter introduced a race condition, so he sent a
reversion patch. I had to modify his patch since reverting at this
point broke Orangefs.
Cleanups:
- Christoph Hellwig noticed that we were doing some unnecessary work
in orangefs_flush, so he sent in a patch that removed the un-needed
code.
- Al Viro told me he had trouble building Orangefs. Orangefs should
be easy to build, even for Al :-).
I looked back at the test server build notes in orangefs.txt, just
in case that's where the trouble really is, and found a couple of
typos and made a couple of clarifications"
* tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: clarify build steps for test server in orangefs.txt
orangefs: don't mess with I_DIRTY_TIMES in orangefs_flush
orangefs: get rid of knob code...
Linus Torvalds [Sat, 11 Apr 2020 00:39:20 +0000 (17:39 -0700)]
Merge tag 'xtensa-
20200410' of git://github.com/jcmvbkbc/linux-xtensa
Pull xtensa updates from Max Filippov:
- replace setup_irq() by request_irq()
- cosmetic fixes in xtensa Kconfig and boot/Makefile
* tag 'xtensa-
20200410' of git://github.com/jcmvbkbc/linux-xtensa:
arch/xtensa: fix grammar in Kconfig help text
xtensa: remove meaningless export ccflags-y
xtensa: replace setup_irq() by request_irq()
Linus Torvalds [Sat, 11 Apr 2020 00:20:06 +0000 (17:20 -0700)]
Merge tag 'for-linus-5.7-rc1b-tag' of git://git./linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- two cleanups
- fix a boot regression introduced in this merge window
- fix wrong use of memory allocation flags
* tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix booting 32-bit pv guest
x86/xen: make xen_pvmmu_arch_setup() static
xen/blkfront: fix memory allocation flags in blkfront_setup_indirect()
xen: Use evtchn_type_t as a type for event channels
Vasily Averin [Fri, 10 Apr 2020 21:34:13 +0000 (14:34 -0700)]
ipc/util.c: sysvipc_find_ipc() should increase position index
If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/b7a20945-e315-8bb0-21e6-3875c14a8494@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Averin [Fri, 10 Apr 2020 21:34:10 +0000 (14:34 -0700)]
kernel/gcov/fs.c: gcov_seq_next() should increase position index
If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/f65c6ee7-bd00-f910-2f8a-37cc67e4ff88@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Averin [Fri, 10 Apr 2020 21:34:06 +0000 (14:34 -0700)]
fs/seq_file.c: seq_read(): add info message about buggy .next functions
Patch series "seq_file .next functions should increase position index".
In Aug 2018 NeilBrown noticed commit
1f4aace60b0e ("fs/seq_file.c:
simplify seq_file iteration code and interface")
"Some ->next functions do not increment *pos when they return NULL...
Note that such ->next functions are buggy and should be fixed. A simple
demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size
larger than the size of /proc/swaps. This will always show the whole
last line of /proc/swaps"
Described problem is still actual. If you make lseek into middle of
last output line following read will output end of last line and whole
last line once again.
$ dd if=/proc/swaps bs=1 # usual output
Filename Type Size Used Priority
/dev/dm-0 partition
4194812 97536 -2
104+0 records in
104+0 records out
104 bytes copied
$ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice
dd: /proc/swaps: cannot skip to specified offset
v/dm-0 partition
4194812 97536 -2
/dev/dm-0 partition
4194812 97536 -2
3+1 records in
3+1 records out
131 bytes copied
There are lot of other affected files, I've found 30+ including
/proc/net/ip_tables_matches and /proc/sysvipc/*
I've sent patches into maillists of affected subsystems already, this
patch-set fixes the problem in files related to pstore, tracing, gcov,
sysvipc and other subsystems processed via linux-kernel@ mailing list
directly
https://bugzilla.kernel.org/show_bug.cgi?id=206283
This patch (of 4):
Add debug code to seq_read() to detect missed or out-of-tree incorrect
.next seq_file functions.
[akpm@linux-foundation.org: s/pr_info/pr_info_ratelimited/, per Qian Cai]
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/244674e5-760c-86bd-d08a-047042881748@virtuozzo.com
Link: http://lkml.kernel.org/r/7c24087c-e280-e580-5b0c-0cdaeb14cd18@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kbuild test robot [Fri, 10 Apr 2020 21:34:03 +0000 (14:34 -0700)]
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.
Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Fixes:
6c41ac96ad92 ("dmaengine: tegra-apb: Support COMPILE_TEST")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2002271133450.2973@hadrien
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pali Rohár [Fri, 10 Apr 2020 21:34:00 +0000 (14:34 -0700)]
change email address for Pali Rohár
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.
People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.
[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:57 +0000 (14:33 -0700)]
selftests: kmod: test disabling module autoloading
Test that request_module() fails with -ENOENT when
/proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an
empty path.
Case (b) is a regression test for the patch "kmod: make request_module()
return an error when autoloading is disabled".
Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with
'kmod.sh' to run all kmod tests.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:53 +0000 (14:33 -0700)]
selftests: kmod: fix handling test numbers above 9
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:50 +0000 (14:33 -0700)]
docs: admin-guide: document the kernel.modprobe sysctl
Document the kernel.modprobe sysctl in the same place that all the other
kernel.* sysctls are documented. Make sure to mention how to use this
sysctl to completely disable module autoloading, and how this sysctl
relates to CONFIG_STATIC_USERMODEHELPER.
[ebiggers@google.com: v5]
Link: http://lkml.kernel.org/r/20200318230515.171692-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-4-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:47 +0000 (14:33 -0700)]
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
After request_module(), nothing is stopping the module from being
unloaded until someone takes a reference to it via try_get_module().
The WARN_ONCE() in get_fs_type() is thus user-reachable, via userspace
running 'rmmod' concurrently.
Since WARN_ONCE() is for kernel bugs only, not for user-reachable
situations, downgrade this warning to pr_warn_once().
Keep it printed once only, since the intent of this warning is to detect
a bug in modprobe at boot time. Printing the warning more than once
wouldn't really provide any useful extra information.
Fixes:
41124db869b7 ("fs: warn in case userspace lied about modprobe return")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Cc: <stable@vger.kernel.org> [4.13+]
Link: http://lkml.kernel.org/r/20200312202552.241885-3-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:43 +0000 (14:33 -0700)]
kmod: make request_module() return an error when autoloading is disabled
Patch series "module autoloading fixes and cleanups", v5.
This series fixes a bug where request_module() was reporting success to
kernel code when module autoloading had been completely disabled via
'echo > /proc/sys/kernel/modprobe'.
It also addresses the issues raised on the original thread
(https://lkml.kernel.org/lkml/
20200310223731.126894-1-ebiggers@kernel.org/T/#u)
bydocumenting the modprobe sysctl, adding a self-test for the empty path
case, and downgrading a user-reachable WARN_ONCE().
This patch (of 4):
It's long been possible to disable kernel module autoloading completely
(while still allowing manual module insertion) by setting
/proc/sys/kernel/modprobe to the empty string.
This can be preferable to setting it to a nonexistent file since it
avoids the overhead of an attempted execve(), avoids potential
deadlocks, and avoids the call to security_kernel_module_request() and
thus on SELinux-based systems eliminates the need to write SELinux rules
to dontaudit module_request.
However, when module autoloading is disabled in this way,
request_module() returns 0. This is broken because callers expect 0 to
mean that the module was successfully loaded.
Apparently this was never noticed because this method of disabling
module autoloading isn't used much, and also most callers don't use the
return value of request_module() since it's always necessary to check
whether the module registered its functionality or not anyway.
But improperly returning 0 can indeed confuse a few callers, for example
get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit:
if (!fs && (request_module("fs-%.*s", len, name) == 0)) {
fs = __get_fs_type(name, len);
WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name);
}
This is easily reproduced with:
echo > /proc/sys/kernel/modprobe
mount -t NONEXISTENT none /
It causes:
request_module fs-NONEXISTENT succeeded, but still no fs?
WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0
[...]
This should actually use pr_warn_once() rather than WARN_ONCE(), since
it's also user-reachable if userspace immediately unloads the module.
Regardless, request_module() should correctly return an error when it
fails. So let's make it return -ENOENT, which matches the error when
the modprobe binary doesn't exist.
I've also sent patches to document and test this case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Ben Hutchings <benh@debian.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org
Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:39 +0000 (14:33 -0700)]
mm/memremap: set caching mode for PCI P2PDMA memory to WC
PCI BAR IO memory should never be mapped as WB, however prior to this
the PAT bits were set WB and it was typically overridden by MTRR
registers set by the firmware.
Set PCI P2PDMA memory to be UC as this is what it currently, typically,
ends up being mapped as on x86 after the MTRR registers override the
cache setting.
Future use-cases may need to generalize this by adding flags to select
the caching type, as some P2PDMA cases may not want UC. However, those
use-cases are not upstream yet and this can be changed when they arrive.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-8-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:36 +0000 (14:33 -0700)]
mm/memory_hotplug: add pgprot_t to mhp_params
devm_memremap_pages() is currently used by the PCI P2PDMA code to create
struct page mappings for IO memory. At present, these mappings are
created with PAGE_KERNEL which implies setting the PAT bits to be WB.
However, on x86, an mtrr register will typically override this and force
the cache type to be UC-. In the case firmware doesn't set this
register it is effectively WB and will typically result in a machine
check exception when it's accessed.
Other arches are not currently likely to function correctly seeing they
don't have any MTRR registers to fall back on.
To solve this, provide a way to specify the pgprot value explicitly to
arch_add_memory().
Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a
simple change to pass the pgprot_t down to their respective functions
which set up the page tables. For x86_32, set the page tables
explicitly using _set_memory_prot() (seeing they are already mapped).
For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this
should be fine, for now, seeing these architectures don't support
ZONE_DEVICE.
A check in __add_pages() is also added to ensure the pgprot parameter
was set for all arches.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-7-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:32 +0000 (14:33 -0700)]
powerpc/mm: thread pgprot_t through create_section_mapping()
In prepartion to support a pgprot_t argument for arch_add_memory().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-6-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:28 +0000 (14:33 -0700)]
x86/mm: introduce __set_memory_prot()
For use in the 32bit arch_add_memory() to set the pgprot type of the
memory to add.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-5-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:24 +0000 (14:33 -0700)]
x86/mm: thread pgprot_t through init_memory_mapping()
In preparation to support a pgprot_t argument for arch_add_memory().
It's required to move the prototype of init_memory_mapping() seeing the
original location came before the definition of pgprot_t.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-4-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:21 +0000 (14:33 -0700)]
mm/memory_hotplug: rename mhp_restrictions to mhp_params
The mhp_restrictions struct really doesn't specify anything resembling a
restriction anymore so rename it to be mhp_params as it is a list of
extended parameters.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-3-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:17 +0000 (14:33 -0700)]
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
Patch series "Allow setting caching mode in arch_add_memory() for
P2PDMA", v4.
Currently, the page tables created using memremap_pages() are always
created with the PAGE_KERNEL cacheing mode. However, the P2PDMA code is
creating pages for PCI BAR memory which should never be accessed through
the cache and instead use either WC or UC. This still works in most
cases, on x86, because the MTRR registers typically override the caching
settings in the page tables for all of the IO memory to be UC-.
However, this tends not to work so well on other arches or some rare x86
machines that have firmware which does not setup the MTRR registers in
this way.
Instead of this, this series proposes a change to arch_add_memory() to
take the pgprot required by the mapping which allows us to explicitly
set pagetable entries for P2PDMA memory to UC.
This changes is pretty routine for most of the arches: x86_64, arm64 and
powerpc simply need to thread the pgprot through to where the page
tables are setup. x86_32 unfortunately sets up the page tables at boot
so must use _set_memory_prot() to change their caching mode. ia64, s390
and sh don't appear to have an easy way to change the page tables so,
for now at least, we just return -EINVAL on such mappings and thus they
will not support P2PDMA memory until the work for this is done. This
should be fine as they don't yet support ZONE_DEVICE.
This patch (of 7):
This variable is not used anywhere and should therefore be removed from
the structure.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-2-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anshuman Khandual [Fri, 10 Apr 2020 21:33:13 +0000 (14:33 -0700)]
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL
but required to define quite similar fallback stubs for special page
table entry helpers such as pte_special() and pte_mkspecial(), as they
get build in generic MM without a config check. This creates two
generic fallback stub definitions for these helpers, eliminating much
code duplication.
mips platform has a special case where pte_special() and pte_mkspecial()
visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires.
This restricts those symbol visibility in order to avoid redefinitions
which is now exposed through this new generic stubs and subsequent build
failure. arm platform set_pte_at() definition needs to be moved into a
C file just to prevent a build failure.
[anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas]
Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Stafford Horne <shorne@gmail.com> [openrisc]
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anshuman Khandual [Fri, 10 Apr 2020 21:33:09 +0000 (14:33 -0700)]
mm/vma: introduce VM_ACCESS_FLAGS
There are many places where all basic VMA access flags (read, write,
exec) are initialized or checked against as a group. One such example
is during page fault. Existing vma_is_accessible() wrapper already
creates the notion of VMA accessibility as a group access permissions.
Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which
will not only reduce code duplication but also extend the VMA
accessibility concept in general.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Springer <rspringer@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anshuman Khandual [Fri, 10 Apr 2020 21:33:05 +0000 (14:33 -0700)]
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS. While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms. Apart from simplification, this
reduces code duplication as well.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjun Roy [Fri, 10 Apr 2020 21:33:01 +0000 (14:33 -0700)]
mm/memory.c: add vm_insert_pages()
Add the ability to insert multiple pages at once to a user VM with lower
PTE spinlock operations.
The intention of this patch-set is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.
[akpm@linux-foundation.org: pte_alloc() no longer takes the `addr' argument]
[arjunroy@google.com: add missing page_count() check to vm_insert_pages()]
Link: http://lkml.kernel.org/r/20200214005929.104481-1-arjunroy.kdev@gmail.com
[arjunroy@google.com: vm_insert_pages() checks if pte_index defined]
Link: http://lkml.kernel.org/r/20200228054714.204424-2-arjunroy.kdev@gmail.com
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200128025958.43490-2-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjun Roy [Fri, 10 Apr 2020 21:32:58 +0000 (14:32 -0700)]
mm: define pte_index as macro for x86
pte_index() is either defined as a macro (e.g. sparc64) or as an
inlined function (e.g. x86). vm_insert_pages() depends on pte_index
but it is not defined on all platforms (e.g. m68k).
To fix compilation of vm_insert_pages() on architectures not providing
pte_index(), we perform the following fix:
0. For platforms where it is meaningful, and defined as a macro, no
change is needed.
1. For platforms where it is meaningful and defined as an inlined
function, and we want to use it with vm_insert_pages(), we define
a degenerate macro of the form: #define pte_index pte_index
2. vm_insert_pages() checks for the existence of a pte_index macro
definition. If found, it implements a batched insert. If not found,
it devolves to calling vm_insert_page() in a loop.
This patch implements step 1 for x86.
v3 of this patch fixes a compilation warning for an unused method.
v2 of this patch moved a macro definition to a more readable location.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200228054714.204424-1-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjun Roy [Fri, 10 Apr 2020 21:32:54 +0000 (14:32 -0700)]
mm: bring sparc pte_index() semantics inline with other platforms
pte_index() on platforms other than sparc return a numerical index. On
sparc, it returns a pte_t*. This presents an issue for
vm_insert_pages(), which relies on pte_index() to find the offset for a
pte within a pmd, for batched inserts.
This patch:
1. Modifies pte_index() for sparc to return a numerical index, like
other platforms,
2. Defines pte_entry() for sparc which returns a pte_t*
(as pte_index() used to),
3. Converts existing sparc callers for pte_index() to use pte_entry().
[sfr@canb.auug.org.au: remove pte_entry and just directly modified pte_offset_kernel instead]
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arjun Roy <arjunroy.kdev@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: http://lkml.kernel.org/r/20200227105045.6b421d9f@canb.auug.org.au
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjun Roy [Fri, 10 Apr 2020 21:32:51 +0000 (14:32 -0700)]
mm/memory.c: refactor insert_page to prepare for batched-lock insert
Add helper methods for vm_insert_page()/insert_page() to prepare for
vm_insert_pages(), which batch-inserts pages to reduce spinlock
operations when inserting multiple consecutive pages into the user page
table.
The intention of this patch-set is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200128025958.43490-1-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jaewon Kim [Fri, 10 Apr 2020 21:32:48 +0000 (14:32 -0700)]
mm/mmap.c: initialize align_offset explicitly for vm_unmapped_area
On passing requirement to vm_unmapped_area, arch_get_unmapped_area and
arch_get_unmapped_area_topdown did not set align_offset. Internally on
both unmapped_area and unmapped_area_topdown, if info->align_mask is 0,
then info->align_offset was meaningless.
But commit
df529cabb7a2 ("mm: mmap: add trace point of
vm_unmapped_area") always prints info->align_offset even though it is
uninitialized.
Fix this uninitialized value issue by setting it to 0 explicitly.
Before:
vm_unmapped_area: addr=0x755b155000 err=0 total_vm=0x15aaf0 flags=0x1 len=0x109000 lo=0x8000 hi=0x75eed48000 mask=0x0 ofs=0x4022
After:
vm_unmapped_area: addr=0x74a4ca1000 err=0 total_vm=0x168ab1 flags=0x1 len=0x9000 lo=0x8000 hi=0x753d94b000 mask=0x0 ofs=0x0
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20200409094035.19457-1-jaewon31.kim@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Fri, 10 Apr 2020 21:32:45 +0000 (14:32 -0700)]
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit
944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aslan Bakirov [Fri, 10 Apr 2020 21:32:42 +0000 (14:32 -0700)]
mm: cma: NUMA node interface
I've noticed that there is no interface exposed by CMA which would let
me to declare contigous memory on particular NUMA node.
This patchset adds the ability to try to allocate contiguous memory on a
specific node. It will fallback to other nodes if the specified one
doesn't work.
Implement a new method for declaring contigous memory on particular node
and keep cma_declare_contiguous() as a wrapper.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Aslan Bakirov <aslan@fb.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Andreas Schaufler <andreas.schaufler@gmx.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changwei Ge [Fri, 10 Apr 2020 21:32:38 +0000 (14:32 -0700)]
ocfs2: no need try to truncate file beyond i_size
Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can
exceed the inode size. Ocfs2 now doesn't allow that offset beyond inode
size. This restriction is not necessary and violates fallocate(2)
semantics.
If fallocate(2) offset is beyond inode size, just return success and do
nothing further.
Otherwise, ocfs2 will crash the kernel.
kernel BUG at fs/ocfs2//alloc.c:7264!
ocfs2_truncate_inline+0x20f/0x360 [ocfs2]
ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2]
__ocfs2_change_file_space+0x4a5/0x650 [ocfs2]
ocfs2_fallocate+0x83/0xa0 [ocfs2]
vfs_fallocate+0x148/0x230
SyS_fallocate+0x48/0x80
do_syscall_64+0x79/0x170
Signed-off-by: Changwei Ge <chge@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Yan [Fri, 10 Apr 2020 21:32:32 +0000 (14:32 -0700)]
mm/page_alloc: make pcpu_drain_mutex and pcpu_drain static
Fix the following sparse warning:
mm/page_alloc.c:106:1: warning: symbol 'pcpu_drain_mutex' was not declared. Should it be static?
mm/page_alloc.c:107:1: warning: symbol '__pcpu_scope_pcpu_drain' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200407023925.46438-1-yanaijie@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Fri, 10 Apr 2020 21:32:29 +0000 (14:32 -0700)]
mm/page_alloc.c: fix kernel-doc warning
Add description of function parameter 'mt' to fix kernel-doc warning:
mm/page_alloc.c:3246: warning: Function parameter or member 'mt' not described in '__putback_isolated_page'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/02998bd4-0b82-2f15-2570-f86130304d1e@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mauro Carvalho Chehab [Fri, 10 Apr 2020 21:32:25 +0000 (14:32 -0700)]
docs: mm: slab.h: fix a broken cross-reference
There is a typo at the cross-reference link, causing this warning:
include/linux/slab.h:11: WARNING: undefined label: memory-allocation (if the link has no caption the label must precede a section header)
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/0aeac24235d356ebd935d11e147dcc6edbb6465c.1586359676.git.mchehab+huawei@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qiujun Huang [Fri, 10 Apr 2020 21:32:22 +0000 (14:32 -0700)]
mm, slab_common: fix a typo in comment "eariler"->"earlier"
There is a typo in comment, fix it.
s/eariler/earlier/
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Lameter <cl@linux.com>
Link: http://lkml.kernel.org/r/20200405160544.1246-1-hqjagain@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jakub Kicinski [Fri, 10 Apr 2020 21:32:19 +0000 (14:32 -0700)]
mm, memcg: do not high throttle allocators based on wraparound
If a cgroup violates its memory.high constraints, we may end up unduly
penalising it. For example, for the following hierarchy:
A: max high, 20 usage
A/B: 9 high, 10 usage
A/C: max high, 10 usage
We would end up doing the following calculation below when calculating
high delay for A/B:
A/B: 10 - 9 = 1...
A: 20 - PAGE_COUNTER_MAX = 21, so set max_overage to 21.
This gets worse with higher disparities in usage in the parent.
I have no idea how this disappeared from the final version of the patch,
but it is certainly Not Good(tm). This wasn't obvious in testing because,
for a simple cgroup hierarchy with only one child, the result is usually
roughly the same. It's only in more complex hierarchies that things go
really awry (although still, the effects are limited to a maximum of 2
seconds in schedule_timeout_killable at a maximum).
[chris@chrisdown.name: changelog]
Fixes:
e26733e0d0ec ("mm, memcg: throttle allocators based on ancestral memory.high")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [5.4.x]
Link: http://lkml.kernel.org/r/20200331152424.GA1019937@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simon Gander [Fri, 10 Apr 2020 21:32:16 +0000 (14:32 -0700)]
hfsplus: fix crash and filesystem corruption when deleting files
When removing files containing extended attributes, the hfsplus driver may
remove the wrong entries from the attributes b-tree, causing major
filesystem damage and in some cases even kernel crashes.
To remove a file, all its extended attributes have to be removed as well.
The driver does this by looking up all keys in the attributes b-tree with
the cnid of the file. Each of these entries then gets deleted using the
key used for searching, which doesn't contain the attribute's name when it
should. Since the key doesn't contain the name, the deletion routine will
not find the correct entry and instead remove the one in front of it. If
parent nodes have to be modified, these become corrupt as well. This
causes invalid links and unsorted entries that not even macOS's fsck_hfs
is able to fix.
To fix this, modify the search key before an entry is deleted from the
attributes b-tree by copying the found entry's key into the search key,
therefore ensuring that the correct entry gets removed from the tree.
Signed-off-by: Simon Gander <simon@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sergey Senozhatsky [Tue, 3 Mar 2020 11:30:02 +0000 (20:30 +0900)]
printk: queue wake_up_klogd irq_work only if per-CPU areas are ready
printk_deferred(), similarly to printk_safe/printk_nmi, does not
immediately attempt to print a new message on the consoles, avoiding
calls into non-reentrant kernel paths, e.g. scheduler or timekeeping,
which potentially can deadlock the system.
Those printk() flavors, instead, rely on per-CPU flush irq_work to print
messages from safer contexts. For same reasons (recursive scheduler or
timekeeping calls) printk() uses per-CPU irq_work in order to wake up
user space syslog/kmsg readers.
However, only printk_safe/printk_nmi do make sure that per-CPU areas
have been initialised and that it's safe to modify per-CPU irq_work.
This means that, for instance, should printk_deferred() be invoked "too
early", that is before per-CPU areas are initialised, printk_deferred()
will perform illegal per-CPU access.
Lech Perczak [0] reports that after commit
1b710b1b10ef ("char/random:
silence a lockdep splat with printk()") user-space syslog/kmsg readers
are not able to read new kernel messages.
The reason is printk_deferred() being called too early (as was pointed
out by Petr and John).
Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU
areas are initialized.
Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/
Reported-by: Lech Perczak <l.perczak@camlintechnologies.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Jann Horn <jannh@google.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 10 Apr 2020 19:59:56 +0000 (12:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull proc fix from Eric Biederman:
"A brown paper bag slipped through my proc changes, and syzcaller
caught it when the code ended up in your tree.
I have opted to fix it the simplest cleanest way I know how, so there
is no reasonable chance for the bug to repeat"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Use a dedicated lock in struct pid