OSDN Git Service
Nadav Amit [Mon, 4 Jun 2018 13:58:14 +0000 (06:58 -0700)]
gpio: Fix wrong rounding in gpio-menz127
[ Upstream commit
7279d9917560bbd0d82813d6bf00490a82c06783 ]
men_z127_debounce() tries to round up and down, but uses functions which
are only suitable when the divider is a power of two, which is not the
case. Use the appropriate ones.
Found by static check. Compile tested.
Fixes:
f436bc2726c64 ("gpio: add driver for MEN 16Z127 GPIO controller")
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jessica Yu [Tue, 5 Jun 2018 08:22:52 +0000 (10:22 +0200)]
module: exclude SHN_UNDEF symbols from kallsyms api
[ Upstream commit
9f2d1e68cf4d641def734adaccfc3823d3575e6c ]
Livepatch modules are special in that we preserve their entire symbol
tables in order to be able to apply relocations after module load. The
unwanted side effect of this is that undefined (SHN_UNDEF) symbols of
livepatch modules are accessible via the kallsyms api and this can
confuse symbol resolution in livepatch (klp_find_object_symbol()) and
cause subtle bugs in livepatch.
Have the module kallsyms api skip over SHN_UNDEF symbols. These symbols
are usually not available for normal modules anyway as we cut down their
symbol tables to just the core (non-undefined) symbols, so this should
really just affect livepatch modules. Note that this patch doesn't
affect the display of undefined symbols in /proc/kallsyms.
Reported-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Girdwood [Thu, 14 Jun 2018 19:26:42 +0000 (20:26 +0100)]
ASoC: dapm: Fix potential DAI widget pointer deref when linking DAIs
[ Upstream commit
e01b4f624278d5efe5fb5da585ca371947b16680 ]
Sometime a component or topology may configure a DAI widget with no
private data leading to a dev_dbg() dereferencne of this data.
Fix this to check for non NULL private data and let users know if widget
is missing DAI.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 12 Jun 2018 12:43:35 +0000 (14:43 +0200)]
EDAC, i7core: Fix memleaks and use-after-free on probe and remove
[ Upstream commit
6c974d4dfafe5e9ee754f2a6fba0eb1864f1649e ]
Make sure to free and deregister the addrmatch and chancounts devices
allocated during probe in all error paths. Also fix use-after-free in a
probe error path and in the remove success path where the devices were
being put before before deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes:
356f0a30860d ("i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy")
Link: http://lkml.kernel.org/r/20180612124335.6420-2-johan@kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kuninori Morimoto [Tue, 12 Jun 2018 05:52:17 +0000 (05:52 +0000)]
ASoC: rsnd: SSI parent cares SWSP bit
[ Upstream commit
203cdf51f28820bee7893b4be392847418e6f4ec ]
SSICR has SWSP bit (= Serial WS Polarity) which decides WS pin 1st
channel polarity (low or hi). This bit shouldn't exchange after running.
Current SSI "parent" doesn't care SSICR, just controls clock only.
Because of this behavior, if platform uses SSI0 as playback,
SSI1 as capture, and if user starts capture -> playback order,
SSI0 SSICR::SWSP bit exchanged 0 -> 1 during captureing, and it makes
capture noise.
This patch cares SSICR on SSI parent, too.
Special thanks to Yokoyama-san
Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Thu, 7 Jun 2018 13:50:48 +0000 (15:50 +0200)]
ASoC: rt1305: Use ULL suffixes for 64-bit constants
[ Upstream commit
4f29b663c08d369fe320a148179996c94cf7d01b ]
With gcc 4.1.2:
sound/soc/codecs/rt1305.c: In function ‘rt1305_calibrate’:
sound/soc/codecs/rt1305.c:1069: warning: integer constant is too large for ‘long’ type
sound/soc/codecs/rt1305.c:1086: warning: integer constant is too large for ‘long’ type
Add the missing "ULL" suffixes to fix this.
Fixes:
29bc643ddd7efb74 ("ASoC: rt1305: Add RT1305/RT1306 amplifier driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 3 Jun 2018 13:42:32 +0000 (15:42 +0200)]
ASoC: Intel: bytcr_rt5640: Fix Acer Iconia 8 over-current detect threshold
[ Upstream commit
f12a0a3c4cc6f594d7c2ea361f2396ae5c518d2c ]
Change the over-current detect threshold on the Acer Iconia 8 from
2000ua to 1500uA, this fixes headset button presses not being detected.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shivasharan S [Mon, 4 Jun 2018 10:45:10 +0000 (03:45 -0700)]
scsi: megaraid_sas: Update controller info during resume
[ Upstream commit
c3b10a55abc943a526aaecd7e860b15671beb906 ]
There is a possibility that firmware on the controller was upgraded before
system was suspended. During resume, driver needs to read updated
controller properties.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kundrát [Mon, 4 Jun 2018 14:34:25 +0000 (16:34 +0200)]
spi: orion: fix CS GPIO handling again
[ Upstream commit
fb9acf5f1f21f1de193523ff780bda375b4c2e21 ]
The code did not de-assert any CS GPIOs before probing slaves. This
means that several CS signals could be active at once, garbling the
communication. Whether this was actually a problem depended on the type
of the SPI device attached (so my "spidev" for userspace access worked
correctly because its probe was effectively a no-op), and on the state
of the GPIO pins at SoC's boot.
The code was already iterating through all DT children of the SPI
controller, so this change re-uses that loop for CS GPIO setup as well.
This means that this might change the number of the HW CS signal which
is picked for all GPIO CS devices. Previously, the lowest one was used,
but we now use the first one from the DT.
With this move of the code, we can also finally initialize each GPIO CS
lane before registering the SPI controller (which in turn probes for
slaves).
I tried to fix this in
544248623b95 already, but that only did it half
way by registering the GPIOs properly. That patch failed to set their
logic signals early enough, though.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiaofei Tan [Thu, 31 May 2018 12:50:44 +0000 (20:50 +0800)]
scsi: hisi_sas: Fix the conflict between dev gone and host reset
[ Upstream commit
d2fc401e47529d9ffd2673a5395d56002e31ad98 ]
There is a possible conflict when a device is removed and host reset occurs
concurrently.
The reason is that then the device is notified as gone, we try to clear the
ITCT, which is notified via an interrupt. The dev gone function pends on
this event with a completion, which is completed when the ITCT interrupt
occurs.
But host reset will disable all interrupts, the wait_for_completion() may
wait indefinitely.
This patch adds an semaphore to synchronise this two processes. The
semaphore is taken by the host reset as the basis of synchronising.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher [Tue, 19 Jun 2018 22:10:55 +0000 (15:10 -0700)]
iomap: complete partial direct I/O writes synchronously
[ Upstream commit
ebf00be37de35788cad72f4f20b4a39e30c0be4a ]
According to xfstest generic/240, applications seem to expect direct I/O
writes to either complete as a whole or to fail; short direct I/O writes
are apparently not appreciated. This means that when only part of an
asynchronous direct I/O write succeeds, we can either fail the entire
write, or we can wait for the partial write to complete and retry the
remaining write as buffered I/O. The old __blockdev_direct_IO helper
has code for waiting for partial writes to complete; the new
iomap_dio_rw iomap helper does not.
The above mentioned fallback mode is needed for gfs2, which doesn't
allow block allocations under direct I/O to avoid taking cluster-wide
exclusive locks. As a consequence, an asynchronous direct I/O write to
a file range that contains a hole will result in a short write. In that
case, wait for the short write to complete to allow gfs2 to recover.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhouyang Jia [Tue, 12 Jun 2018 03:13:00 +0000 (11:13 +0800)]
scsi: bnx2i: add error handling for ioremap_nocache
[ Upstream commit
aa154ea885eb0c2407457ce9c1538d78c95456fa ]
When ioremap_nocache fails, the lack of error-handling code may cause
unexpected results.
This patch adds error-handling code after calling ioremap_nocache.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kan Liang [Tue, 5 Jun 2018 15:38:45 +0000 (08:38 -0700)]
perf/x86/intel/lbr: Fix incomplete LBR call stack
[ Upstream commit
0592e57b24e7e05ec1f4c50b9666c013abff7017 ]
LBR has a limited stack size. If a task has a deeper call stack than
LBR's stack size, only the overflowed part is reported. A complete call
stack may not be reconstructed by perf tool.
Current code doesn't access all LBR registers. It only read the ones
below the TOS. The LBR registers above the TOS will be discarded
unconditionally.
When a CALL is captured, the TOS is incremented by 1 , modulo max LBR
stack size. The LBR HW only records the call stack information to the
register which the TOS points to. It will not touch other LBR
registers. So the registers above the TOS probably still store the valid
call stack information for an overflowed call stack, which need to be
reported.
To retrieve complete call stack information, we need to start from TOS,
read all LBR registers until an invalid entry is detected.
0s can be used to detect the invalid entry, because:
- When a RET is captured, the HW zeros the LBR register which TOS points
to, then decreases the TOS.
- The LBR registers are reset to 0 when adding a new LBR event or
scheduling an existing LBR event.
- A taken branch at IP 0 is not expected
The context switch code is also modified to save/restore all valid LBR
registers. Furthermore, the LBR registers, which don't have valid call
stack information, need to be reset in restore, because they may be
polluted while swapped out.
Here is a small test program, tchain_deep.
Its call stack is deeper than 32.
noinline void f33(void)
{
int i;
for (i = 0; i <
10000000;) {
if (i%2)
i++;
else
i++;
}
}
noinline void f32(void)
{
f33();
}
noinline void f31(void)
{
f32();
}
... ...
noinline void f1(void)
{
f2();
}
int main()
{
f1();
}
Here is the test result on SKX. The max stack size of SKX is 32.
Without the patch:
$ perf record -e cycles --call-graph lbr -- ./tchain_deep
$ perf report --stdio
#
# Children Self Command Shared Object Symbol
# ........ ........ ........... ................ .................
#
100.00% 99.99% tchain_deep tchain_deep [.] f33
|
--99.99%--f30
f31
f32
f33
With the patch:
$ perf record -e cycles --call-graph lbr -- ./tchain_deep
$ perf report --stdio
# Children Self Command Shared Object Symbol
# ........ ........ ........... ................ ..................
#
99.99% 0.00% tchain_deep tchain_deep [.] f1
|
---f1
f2
f3
f4
f5
f6
f7
f8
f9
f10
f11
f12
f13
f14
f15
f16
f17
f18
f19
f20
f21
f22
f23
f24
f25
f26
f27
f28
f29
f30
f31
f32
f33
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lore.kernel.org/lkml/1528213126-4312-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Anholt [Wed, 6 Jun 2018 17:48:51 +0000 (10:48 -0700)]
drm/v3d: Take a lock across GPU scheduler job creation and queuing.
[ Upstream commit
7122b68b8a9692dcc3acf89595f04c492872115f ]
Between creation and queueing of a job, you need to prevent any other
job from being created and queued. Otherwise the scheduler's fences
may be signaled out of seqno order.
v2: move mutex unlock to the error label.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes:
57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Link: https://patchwork.freedesktop.org/patch/msgid/20180606174851.12433-1-eric@anholt.net
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laurent Pinchart [Fri, 8 Jun 2018 12:21:15 +0000 (15:21 +0300)]
arm64: dts: renesas: Fix VSPD registers range
[ Upstream commit
e21adc781bb45e810f1c396c4bc2c1624a4c25b9 ]
The VSPD and FCPVD nodes have overlapping register ranges, as the FCPVD
devices are mapped in the memory range usually used by the VSP LUT and
CLU, which are not present in the VSPD. Fix this by shortening the VSPD
registers range to 0x5000.
Fixes:
9f8573e38a0b ("arm64: dts: renesas: r8a7795: Add VSP instances")
Fixes:
291e0c4994d0 ("arm64: dts: r8a7795: Add support for R-Car H3 ES2.0")
Fixes:
f06ffdfbdd90 ("arm64: dts: r8a7796: Add VSP instances")
Fixes:
b4f92030d5d3 ("arm64: dts: renesas: r8a77970: add VSPD support")
Fixes:
295952a183d3 ("arm64: dts: renesas: r8a77995: add VSP instances")
Fixes:
85cb3229218a ("arm64: dts: renesas: r8a77965: Add VSP instances")
Reported-by: Simon Horman <horms+renesas@verge.net.au>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Mon, 16 Apr 2018 14:47:43 +0000 (23:47 +0900)]
MIPS: boot: fix build rule of vmlinux.its.S
[ Upstream commit
67e09db507db3e1642ddce512a4313d20addd6e5 ]
As Documentation/kbuild/makefile.txt says, it is a typical mistake
to forget the FORCE prerequisite for the rule invoked by if_changed.
Add the FORCE to the prerequisite, but it must be filtered-out from
the files passed to the 'cat' command. Because this rule generates
.vmlinux.its.S.cmd, vmlinux.its.S must be specified as targets so
that the .cmd file is included.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Patchwork: https://patchwork.linux-mips.org/patch/19097/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Boyd [Fri, 22 Jun 2018 02:27:16 +0000 (19:27 -0700)]
HID: i2c-hid: Use devm to allocate i2c_hid struct
[ Upstream commit
d6f83894110de247a81392ab7ef89e5498df7e80 ]
Use devm here to save some lines and prepare for bulk regulator usage in
this driver. Otherwise, when we devm bulk get regulators we'll free the
containing i2c_hid structure and try to put regulator pointers from
freed memory.
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhouyang Jia [Thu, 14 Jun 2018 13:37:17 +0000 (21:37 +0800)]
HID: hid-ntrig: add error handling for sysfs_create_group
[ Upstream commit
44d4d51de9a3534a2b63d69efda02a10e66541e4 ]
When sysfs_create_group fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling sysfs_create_group.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Viresh Kumar [Fri, 25 May 2018 10:31:49 +0000 (16:01 +0530)]
arm: dts: mediatek: Add missing cooling device properties for CPUs
[ Upstream commit
0c7f7a5150023f3c6f0b27c4d4940ce3dfaf62cc ]
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frederic Weisbecker [Tue, 26 Jun 2018 02:58:48 +0000 (04:58 +0200)]
perf/hw_breakpoint: Split attribute parse and commit
[ Upstream commit
9a4903dde2c8633c5fcf887b98c4e047a6154a54 ]
arch_validate_hwbkpt_settings() mixes up attribute check and commit into
a single code entity. Therefore the validation may return an error due to
incorrect atributes while still leaving halfway modified architecture
breakpoint data.
This is harmless when we deal with a new breakpoint but it becomes a
problem when we modify an existing breakpoint.
Split attribute parse and commit to fix that. The architecture is
passed a "struct arch_hw_breakpoint" to fill on top of the new attr
and the core takes care about copying the backend data once it's fully
validated. The architectures then need to implement the new API.
Original-patch-by: Andy Lutomirski <luto@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-2-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Sun, 17 Jun 2018 02:02:03 +0000 (19:02 -0700)]
Documentation/process: fix reST table border error
[ Upstream commit
cccd289f12d0e827070c847b1ff96ba02eb20eaf ]
Fix reST error in Documentation/process/:
Documentation/process/2.Process.rst:131: ERROR: Malformed table.
Bottom/header table border does not match top border.
Fixes:
8962e40c1993 ("docs: update kernel versions and dates in tables")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Tim Bird <tbird20d@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Sun, 24 Jun 2018 08:23:47 +0000 (11:23 +0300)]
RDMA/uverbs: Don't overwrite NULL pointer with ZERO_SIZE_PTR
[ Upstream commit
a5cc9831af05e658543593abaee45a29d061bac4 ]
Number of specs is provided by user and in valid case can be equal to zero.
Such argument causes to call to kcalloc() with zero-length request and in
return the ZERO_SIZE_PTR is assigned. This pointer is different from NULL
and makes various if (..) checks to success.
Fixes:
b6ba4a9aa59f ("IB/uverbs: Add support for flow counters")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ethan Tuttle [Wed, 20 Jun 2018 04:31:08 +0000 (21:31 -0700)]
ARM: mvebu: declare asm symbols as character arrays in pmsu.c
[ Upstream commit
d0d378ff451a66e486488eec842e507d28145813 ]
With CONFIG_FORTIFY_SOURCE, memcpy uses the declared size of operands to
detect buffer overflows. If src or dest is declared as a char, attempts to
copy more than byte will result in a fortify_panic().
Address this problem in mvebu_setup_boot_addr_wa() by declaring
mvebu_boot_wa_start and mvebu_boot_wa_end as character arrays. Also remove
a couple addressof operators to avoid "arithmetic on pointer to an
incomplete type" compiler error.
See commit
54a7d50b9205 ("x86: mark kprobe templates as character arrays,
not single characters") for a similar fix.
Fixes "detected buffer overflow in memcpy" error during init on some mvebu
systems (armada-370-xp, armada-375):
(fortify_panic) from (mvebu_setup_boot_addr_wa+0xb0/0xb4)
(mvebu_setup_boot_addr_wa) from (mvebu_v7_cpu_pm_init+0x154/0x204)
(mvebu_v7_cpu_pm_init) from (do_one_initcall+0x7c/0x1a8)
(do_one_initcall) from (kernel_init_freeable+0x1bc/0x254)
(kernel_init_freeable) from (kernel_init+0x8/0x114)
(kernel_init) from (ret_from_fork+0x14/0x2c)
Signed-off-by: Ethan Tuttle <ethan@ethantuttle.com>
Tested-by: Ethan Tuttle <ethan@ethantuttle.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Fri, 25 May 2018 16:39:24 +0000 (19:39 +0300)]
drm/omap: gem: Fix mm_list locking
[ Upstream commit
5117bd898e8c0a31e8ab3a9b8523aecf0706e997 ]
- None of the list walkings where protected.
- Switch to a mutex since the list walking at device resume time can
sleep when pinning buffers through the tiler.
Only thing we need to be careful with here is that while we walk the
list we can't unreference any gem objects, since the final unref would
result in a recursive deadlock. But the only functions that walk the
list is the device resume and debugfs dumping, so all safe.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Tue, 19 Jun 2018 09:43:35 +0000 (02:43 -0700)]
wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()
[ Upstream commit
4ec7cece87b3ed21ffcd407c62fb2f151a366bc1 ]
Otherwise we can get:
WARNING: CPU: 0 PID: 55 at drivers/net/wireless/ti/wlcore/io.h:84
I've only seen this few times with the runtime PM patches enabled
so this one is probably not needed before that. This seems to
work currently based on the current PM implementation timer. Let's
apply this separately though in case others are hitting this issue.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Wed, 20 Jun 2018 06:58:28 +0000 (08:58 +0200)]
bitfield: fix *_encode_bits()
[ Upstream commit
e7d4a95da86e0b048702765bbdcdc968aaf312e7 ]
There's a bug in *_encode_bits() in using ~field_multiplier() for
the check whether or not the constant value fits into the field,
this is wrong and clearly ~field_mask() was intended. This was
triggering for me for both constant and non-constant values.
Additionally, make this case actually into an compile error.
Declaring the extern function that will never exist with just a
warning is pointless as then later we'll just get a link error.
While at it, also fix the indentation in those lines I'm touching.
Finally, as suggested by Andy Shevchenko, add some tests and for
that introduce also u8 helpers. The tests don't compile without
the fix, showing that it's necessary.
Fixes:
00b0c9b82663 ("Add primitives for manipulating bitfields both in host- and fixed-endian.")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Agner [Sun, 17 Jun 2018 10:33:50 +0000 (12:33 +0200)]
brcmsmac: fix wrap around in conversion from constant to s16
[ Upstream commit
c9a61469fc97672a08b2f798830a55ea6e03dc4a ]
The last value in the log_table wraps around to a negative value
since s16 has a value range of -32768 to 32767. This is not what
the table intends to represent. Use the closest positive value
32767.
This fixes a warning seen with clang:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_qmath.c:216:2: warning:
implicit conversion from 'int' to 's16' (aka 'short') changes
value from 32768
to -32768 [-Wconstant-conversion]
32768
^~~~~
1 warning generated.
Fixes:
4c0bfeaae9f9 ("brcmsmac: fix array out-of-bounds access in qm_log10")
Cc: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 5 Jun 2018 11:31:39 +0000 (14:31 +0300)]
rndis_wlan: potential buffer overflow in rndis_wlan_auth_indication()
[ Upstream commit
ae636fb1554833ee5133ca47bf4b2791b6739c52 ]
This is a static checker fix, not something I have tested. The issue
is that on the second iteration through the loop, we jump forward by
le32_to_cpu(auth_req->length) bytes. The problem is that if the length
is more than "buflen" then we end up with a negative "buflen". A
negative buflen is type promoted to a high positive value and the loop
continues but it's accessing beyond the end of the buffer.
I believe the "auth_req->length" comes from the firmware and if the
firmware is malicious or buggy, you're already toasted so the impact of
this bug is probably not very severe.
Fixes:
030645aceb3d ("rndis_wlan: handle 802.11 indications from device")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenzo Bianconi [Mon, 4 Jun 2018 09:19:41 +0000 (11:19 +0200)]
mt76x2: fix mrr idx/count estimation in mt76x2_mac_fill_tx_status()
[ Upstream commit
2d1e9be0016230f3707812243561fbd16f1aea4b ]
Fix mcs and attempt count estimation in mt76x2_mac_fill_tx_status routine
if the number of tx retries reported by the hw is grater than
IEEE80211_TX_MAX_RATES
Fixes:
7bc04215a66b ("mt76: add driver code for MT76x2e")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niklas Cassel [Mon, 18 Jun 2018 14:00:49 +0000 (17:00 +0300)]
ath10k: transmit queued frames after processing rx packets
[ Upstream commit
3f04950f32d5d592ab4fcaecac2178558a6f7437 ]
When running iperf on ath10k SDIO, TX can stop working:
iperf -c 192.168.1.1 -i 1 -t 20 -w 10K
[ 3] 0.0- 1.0 sec 2.00 MBytes 16.8 Mbits/sec
[ 3] 1.0- 2.0 sec 3.12 MBytes 26.2 Mbits/sec
[ 3] 2.0- 3.0 sec 3.25 MBytes 27.3 Mbits/sec
[ 3] 3.0- 4.0 sec 655 KBytes 5.36 Mbits/sec
[ 3] 4.0- 5.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 5.0- 6.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 6.0- 7.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 7.0- 8.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 8.0- 9.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 9.0-10.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 0.0-10.3 sec 9.01 MBytes 7.32 Mbits/sec
There are frames in the ieee80211_txq and there are frames that have
been removed from from this queue, but haven't yet been sent on the wire
(num_pending_tx).
When num_pending_tx reaches max_num_pending_tx, we will stop the queues
by calling ieee80211_stop_queues().
As frames that have previously been sent for transmission
(num_pending_tx) are completed, we will decrease num_pending_tx and wake
the queues by calling ieee80211_wake_queue(). ieee80211_wake_queue()
does not call wake_tx_queue, so we might still have frames in the
queue at this point.
While the queues were stopped, the socket buffer might have filled up,
and in order for user space to write more, we need to free the frames
in the queue, since they are accounted to the socket. In order to free
them, we first need to transmit them.
This problem cannot be reproduced on low-latency devices, e.g. pci,
since they call ath10k_mac_tx_push_pending() from
ath10k_htt_txrx_compl_task(). ath10k_htt_txrx_compl_task() is not called
on high-latency devices.
Fix the problem by calling ath10k_mac_tx_push_pending(), after
processing rx packets, just like for low-latency devices, also in the
SDIO case. Since we are calling ath10k_mac_tx_push_pending() directly,
we also need to export it.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jernej Skrabec [Mon, 25 Jun 2018 12:02:46 +0000 (14:02 +0200)]
drm/sun4i: Fix releasing node when enumerating enpoints
[ Upstream commit
367c359aa8637b15ee8df6335c5a29b7623966ec ]
sun4i_drv_add_endpoints() has a memory leak since it uses of_node_put()
when remote is equal to NULL and does nothing when remote has a valid
pointer.
Invert the logic to fix memory leak.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-7-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brandon Maier [Tue, 26 Jun 2018 17:50:48 +0000 (12:50 -0500)]
net: phy: xgmiitorgmii: Check phy_driver ready before accessing
[ Upstream commit
ab4e6ee578e88a659938db8fbf33720bc048d29c ]
Since a phy_device is added to the global mdio_bus list during
phy_device_register(), but a phy_device's phy_driver doesn't get
attached until phy_probe(). It's possible of_phy_find_device() in
xgmiitorgmii will return a valid phy with a NULL phy_driver. Leading to
a NULL pointer access during the memcpy().
Fixes this Oops:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd =
c0004000
[
00000000] *pgd=
00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.40 #1
Hardware name: Xilinx Zynq Platform
task:
ce4c8d00 task.stack:
ce4ca000
PC is at memcpy+0x48/0x330
LR is at xgmiitorgmii_probe+0x90/0xe8
pc : [<
c074bc68>] lr : [<
c0529548>] psr:
20000013
sp :
ce4cbb54 ip :
00000000 fp :
ce4cbb8c
r10:
00000000 r9 :
00000000 r8 :
c0c49178
r7 :
00000000 r6 :
cdc14718 r5 :
ce762800 r4 :
cdc14710
r3 :
00000000 r2 :
00000054 r1 :
00000000 r0 :
cdc14718
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control:
18c5387d Table:
0000404a DAC:
00000051
Process swapper/0 (pid: 1, stack limit = 0xce4ca210)
...
[<
c074bc68>] (memcpy) from [<
c0529548>] (xgmiitorgmii_probe+0x90/0xe8)
[<
c0529548>] (xgmiitorgmii_probe) from [<
c0526a94>] (mdio_probe+0x28/0x34)
[<
c0526a94>] (mdio_probe) from [<
c04db98c>] (driver_probe_device+0x254/0x414)
[<
c04db98c>] (driver_probe_device) from [<
c04dbd58>] (__device_attach_driver+0xac/0x10c)
[<
c04dbd58>] (__device_attach_driver) from [<
c04d96f4>] (bus_for_each_drv+0x84/0xc8)
[<
c04d96f4>] (bus_for_each_drv) from [<
c04db5bc>] (__device_attach+0xd0/0x134)
[<
c04db5bc>] (__device_attach) from [<
c04dbdd4>] (device_initial_probe+0x1c/0x20)
[<
c04dbdd4>] (device_initial_probe) from [<
c04da8fc>] (bus_probe_device+0x98/0xa0)
[<
c04da8fc>] (bus_probe_device) from [<
c04d8660>] (device_add+0x43c/0x5d0)
[<
c04d8660>] (device_add) from [<
c0526cb8>] (mdio_device_register+0x34/0x80)
[<
c0526cb8>] (mdio_device_register) from [<
c0580b48>] (of_mdiobus_register+0x170/0x30c)
[<
c0580b48>] (of_mdiobus_register) from [<
c05349c4>] (macb_probe+0x710/0xc00)
[<
c05349c4>] (macb_probe) from [<
c04dd700>] (platform_drv_probe+0x44/0x80)
[<
c04dd700>] (platform_drv_probe) from [<
c04db98c>] (driver_probe_device+0x254/0x414)
[<
c04db98c>] (driver_probe_device) from [<
c04dbc58>] (__driver_attach+0x10c/0x118)
[<
c04dbc58>] (__driver_attach) from [<
c04d9600>] (bus_for_each_dev+0x8c/0xd0)
[<
c04d9600>] (bus_for_each_dev) from [<
c04db1fc>] (driver_attach+0x2c/0x30)
[<
c04db1fc>] (driver_attach) from [<
c04daa98>] (bus_add_driver+0x50/0x260)
[<
c04daa98>] (bus_add_driver) from [<
c04dc440>] (driver_register+0x88/0x108)
[<
c04dc440>] (driver_register) from [<
c04dd6b4>] (__platform_driver_register+0x50/0x58)
[<
c04dd6b4>] (__platform_driver_register) from [<
c0b31248>] (macb_driver_init+0x24/0x28)
[<
c0b31248>] (macb_driver_init) from [<
c010203c>] (do_one_initcall+0x60/0x1a4)
[<
c010203c>] (do_one_initcall) from [<
c0b00f78>] (kernel_init_freeable+0x15c/0x1f8)
[<
c0b00f78>] (kernel_init_freeable) from [<
c0763d10>] (kernel_init+0x18/0x124)
[<
c0763d10>] (kernel_init) from [<
c0112d74>] (ret_from_fork+0x14/0x20)
Code:
ba000002 f5d1f03c f5d1f05c f5d1f07c (
e8b151f8)
---[ end trace
3e4ec21905820a1f ]---
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jernej Skrabec [Mon, 25 Jun 2018 12:02:56 +0000 (14:02 +0200)]
drm/sun4i: Enable DW HDMI PHY clock
[ Upstream commit
09773c532d30187f86a142901c27c93e629ce6ba ]
Current DW HDMI PHY code never prepares and enables PHY clock after it is
created. It's just used as it is. This may work in some cases, but it's
clearly wrong. Fix it by adding proper calls to enable/disable PHY
clock.
Fixes:
4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-17-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Greear [Mon, 18 Jun 2018 14:00:56 +0000 (17:00 +0300)]
ath10k: protect ath10k_htt_rx_ring_free with rx_ring.lock
[ Upstream commit
168f75f11fe68455e0d058a818ebccfc329d8685 ]
While debugging driver crashes related to a buggy firmware
crashing under load, I noticed that ath10k_htt_rx_ring_free
could be called without being under lock. I'm not sure if this
is the root cause of the crash or not, but it seems prudent to
protect it.
Originally tested on 4.16+ kernel with ath10k-ct 10.4 firmware
running on 9984 NIC.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brandon Maier [Tue, 26 Jun 2018 17:50:50 +0000 (12:50 -0500)]
net: phy: xgmiitorgmii: Check read_status results
[ Upstream commit
8d0752d11312be830c33e84dfd1016e6a47c2938 ]
We're ignoring the result of the attached phy device's read_status().
Return it so we can detect errors.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Thu, 28 Jun 2018 07:28:24 +0000 (15:28 +0800)]
ALSA: hda: Add AZX_DCAPS_PM_RUNTIME for AMD Raven Ridge
[ Upstream commit
1adca4b0cd65c14cb8b8c9c257720385869c3d5f ]
This patch can make audio controller in AMD Raven Ridge gets runtime
suspended to D3, to save ~1W power when it's not in use.
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 27 Jun 2018 08:56:53 +0000 (11:56 +0300)]
ASoC: qdsp6: qdafe: fix some off by one bugs
[ Upstream commit
c54c1c5ee8e73b7cb752834e52e2129b1dab00bd ]
The > should be >= or we could read one element beyond the end of the
port_maps[] array.
Fixes:
7fa2d70f9766 ("ASoC: qdsp6: q6afe: Add q6afe driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhouyang Jia [Mon, 11 Jun 2018 04:39:20 +0000 (00:39 -0400)]
media: tm6000: add error handling for dvb_register_adapter
[ Upstream commit
e95d7c6eb94c634852eaa5ff4caf3db05b5d2e86 ]
When dvb_register_adapter fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling dvb_register_adapter.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
[hans.verkuil@cisco.com: use pr_err and fix typo: adater -> adapter]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rosen Penev [Sun, 17 Jun 2018 02:17:50 +0000 (19:17 -0700)]
staging: mt7621-dts: Fix remaining pcie warnings
[ Upstream commit
d0233204fbc10f003d1ef077f57341c2feca4002 ]
This currently fixes the remaining dtb warnings:
Node /pcie@
1e140000/pcie0 has a reg or ranges property, but no unit name
Node /pcie@
1e140000/pcie1 has a reg or ranges property, but no unit name
Node /pcie@
1e140000/pcie2 has a reg or ranges property, but no unit name
Node /pcie@
1e140000/pcie0 node name is not "pci" or "pcie"
Node /pcie@
1e140000/pcie0 missing ranges for PCI bridge (or not a bridge)
Node /pcie@
1e140000/pcie0 missing bus-range for PCI bridge
Node /pcie@
1e140000/pcie1 node name is not "pci" or "pcie"
Node /pcie@
1e140000/pcie1 missing ranges for PCI bridge (or not a bridge)
Node /pcie@
1e140000/pcie1 missing bus-range for PCI bridge
Node /pcie@
1e140000/pcie2 node name is not "pci" or "pcie"
Node /pcie@
1e140000/pcie2 missing ranges for PCI bridge (or not a bridge)
Node /pcie@
1e140000/pcie2 missing bus-range for PCI bridge
Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
device_type was removed since according to documentation, it's deprecated
for pci(e) devices.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Mon, 11 Jun 2018 17:30:35 +0000 (19:30 +0200)]
serial: pxa: Fix an error handling path in 'serial_pxa_probe()'
[ Upstream commit
95a0e656580fab3128c7bee5f660c50784f53651 ]
If port.line is out of range, we still need to release some resources, or
we will leak them.
Fixes:
afc7851fab83 ("serial: pxa: Fix out-of-bounds access through serial port index")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Thu, 14 Jun 2018 13:48:08 +0000 (15:48 +0200)]
arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
[ Upstream commit
c5a884838ce34681200b5a45b2330177036affd0 ]
With recent dtc and W=1:
...salvator-x.dtb: Warning (graph_port): /soc/i2c@
e66d8000/video-receiver@70/port@10: graph node unit address error, expected "a"
...salvator-x.dtb: Warning (graph_port): /soc/i2c@
e66d8000/video-receiver@70/port@11: graph node unit address error, expected "b"
Unit addresses are always hexadecimal (without prefix), while the bases
of reg property values depend on their prefixes.
Fixes:
908001d778eba06e ("arm64: dts: renesas: salvator-common: Add ADV7482 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhouyang Jia [Tue, 12 Jun 2018 04:36:25 +0000 (12:36 +0800)]
drivers/tty: add error handling for pcmcia_loop_config
[ Upstream commit
85c634e919bd6ef17427f26a52920aeba12e16ee ]
When pcmcia_loop_config fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling pcmcia_loop_config.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kamal Heib [Tue, 19 Jun 2018 17:04:08 +0000 (20:04 +0300)]
staging: mt7621-eth: Fix memory leak in mtk_add_mac() error path
[ Upstream commit
85e1d42663a0c163002961d2685be952067b0dc2 ]
Fix memory leak in error path of mtk_add_mac() by make sure to free
the allocated netdev.
Fixes:
e3cbf478f846 ('staging: mt7621-eth: add the drivers core files')
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akinobu Mita [Sun, 6 May 2018 14:19:18 +0000 (10:19 -0400)]
media: ov772x: allow i2c controllers without I2C_FUNC_PROTOCOL_MANGLING
[ Upstream commit
0b964d183cbf3f95a062ad9f3eec87ffa2790558 ]
The ov772x driver only works when the i2c controller have
I2C_FUNC_PROTOCOL_MANGLING. However, many i2c controller drivers don't
support it.
The reason that the ov772x requires I2C_FUNC_PROTOCOL_MANGLING is that
it doesn't support repeated starts.
This changes the reading ov772x register method so that it doesn't
require I2C_FUNC_PROTOCOL_MANGLING by calling two separated i2c messages.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alistair Strachan [Wed, 20 Jun 2018 00:57:35 +0000 (17:57 -0700)]
staging: android: ashmem: Fix mmap size validation
[ Upstream commit
8632c614565d0c5fdde527889601c018e97b6384 ]
The ashmem driver did not check that the size/offset of the vma passed
to its .mmap() function was not larger than the ashmem object being
mapped. This could cause mmap() to succeed, even though accessing parts
of the mapping would later fail with a segmentation fault.
Ensure an error is returned by the ashmem_mmap() function if the vma
size is larger than the ashmem object size. This enables safer handling
of the problem in userspace.
Cc: Todd Kjos <tkjos@android.com>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-team@android.com
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Alistair Strachan <astrachan@google.com>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akinobu Mita [Sun, 6 May 2018 14:19:19 +0000 (10:19 -0400)]
media: ov772x: add checks for register read errors
[ Upstream commit
30f3b17eaf4913e9e56be15915ce57aae69db701 ]
This change adds checks for register read errors and returns correct
error code.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Javier Martinez Canillas [Sat, 9 Jun 2018 12:22:45 +0000 (08:22 -0400)]
media: omap3isp: zero-initialize the isp cam_xclk{a,b} initial data
[ Upstream commit
2ec7debd44b49927a6e2861521994cc075a389ed ]
The struct clk_init_data init variable is declared in the isp_xclk_init()
function so is an automatic variable allocated in the stack. But it's not
explicitly zero-initialized, so some init fields are left uninitialized.
This causes the data structure to have undefined values that may confuse
the common clock framework when the clock is registered.
For example, the uninitialized .flags field could have the CLK_IS_CRITICAL
bit set, causing the framework to wrongly prepare the clk on registration.
This leads to the isp_xclk_prepare() callback being called, which in turn
calls to the omap3isp_get() function that increments the isp dev refcount.
Since this omap3isp_get() call is unexpected, this leads to an unbalanced
omap3isp_get() call that prevents the requested IRQ to be later enabled,
due the refcount not being 0 when the correct omap3isp_get() call happens.
Fixes:
9b28ee3c9122 ("[media] omap3isp: Use the common clock framework")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akinobu Mita [Sun, 10 Jun 2018 15:42:26 +0000 (11:42 -0400)]
media: soc_camera: ov772x: correct setting of banding filter
[ Upstream commit
22216ec41e919682c15345e95928f266e8ba6f9e ]
The banding filter ON/OFF is controlled via bit 5 of COM8 register. It
is attempted to be enabled in ov772x_set_params() by the following line.
ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);
But this unexpectedly results disabling the banding filter, because the
mask and set bits are exclusive.
On the other hand, ov772x_s_ctrl() correctly sets the bit by:
ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF);
The same fix was already applied to non-soc_camera version of ov772x
driver in the commit commit
a024ee14cd36 ("media: ov772x: correct setting
of banding filter")
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akinobu Mita [Sun, 10 Jun 2018 15:42:01 +0000 (11:42 -0400)]
media: s3c-camif: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power
[ Upstream commit
30ed2b83343bd1e07884ca7355dac70d25ffc158 ]
When the subdevice doesn't provide s_power core ops callback, the
v4l2_subdev_call for s_power returns -ENOIOCTLCMD. If the subdevice
doesn't have the special handling for its power saving mode, the s_power
isn't required. So -ENOIOCTLCMD from the v4l2_subdev_call should be
ignored.
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bob Copeland [Thu, 21 Jun 2018 12:25:48 +0000 (08:25 -0400)]
ath10k: use locked skb_dequeue for rx completions
[ Upstream commit
62652555c616cad23a572f76cb5e870ab5395191 ]
In our environment we are occasionally seeing the following stack trace
in ath10k:
Unable to handle kernel paging request at virtual address
0000a800
pgd =
c0204000
[
0000a800] *pgd=
00000000
Internal error: Oops: 17 [#1] SMP ARM
Modules linked in: dwc3 dwc3_of_simple phy_qcom_dwc3 nf_nat xt_connmark
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.31 #2
Hardware name: Generic DT based system
task:
c09f4f40 task.stack:
c09ee000
PC is at kfree_skb_list+0x1c/0x2c
LR is at skb_release_data+0x6c/0x108
pc : [<
c065dcc4>] lr : [<
c065da5c>] psr:
200f0113
sp :
c09efb68 ip :
c09efb80 fp :
c09efb7c
r10:
00000000 r9 :
00000000 r8 :
043fddd1
r7 :
bf15d160 r6 :
00000000 r5 :
d4ca2f00 r4 :
ca7c6480
r3 :
000000a0 r2 :
01000000 r1 :
c0a57470 r0 :
0000a800
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control:
10c5787d Table:
56e6006a DAC:
00000051
Process swapper/0 (pid: 0, stack limit = 0xc09ee210)
Stack: (0xc09efb68 to 0xc09f0000)
fb60:
ca7c6480 d4ca2f00 c09efb9c c09efb80 c065da5c c065dcb4
fb80:
d4ca2f00 00000000 dcbf8400 bf15d160 c09efbb4 c09efba0 c065db28 c065d9fc
fba0:
d4ca2f00 00000000 c09efbcc c09efbb8 c065db48 c065db04 d4ca2f00 00000000
fbc0:
c09efbe4 c09efbd0 c065ddd0 c065db38 d4ca2f00 00000000 c09efc64 c09efbe8
fbe0:
bf09bd00 c065dd10 00000003 7fffffff c09efc24 dcbfc9c0 01200000 00000000
fc00:
00000000 00000000 ddb7e440 c09e9440 c09efc48 1d195000 c09efc7c c09efc28
fc20:
c027bb68 c028aa00 ddb7e4f8 bf13231c ddb7e454 0004091f bf154571 d4ca2f00
fc40:
dcbf8d00 ca7c5df6 bf154538 01200000 00000000 bf154538 c09efd1c c09efc68
fc60:
bf132458 bf09bbbc ca7c5dec 00000041 bf154538 bf154539 000007bf bf154545
fc80:
bf154538 bf154538 bf154538 bf154538 bf154538 00000000 00000000 000016c1
fca0:
00000001 c09efcb0 01200000 00000000 00000000 00000000 00000000 00000001
fcc0:
bf154539 00000041 00000000 00000007 00000000 000000d0 ffffffff 3160ffff
fce0:
9ad93e97 3e973160 7bf09ad9 0004091f d4ca2f00 c09efdb0 dcbf94e8 00000000
fd00:
dcbf8d00 01200000 00000000 dcbf8d00 c09efd44 c09efd20 bf132544 bf132130
fd20:
dcbf8d00 00000000 d4ca2f00 c09efdb0 00000001 d4ca2f00 c09efdec c09efd48
fd40:
bf133630 bf1324d0 ca7c5cc0 000007c0 c09efd88 c09efd70 c0764230 c02277d8
fd60:
200f0113 ffffffff dcbf94c8 bf000000 dcbf93b0 dcbf8d00 00000040 dcbf945c
fd80:
dcbf94e8 00000000 c09efdcc 00000000 c09efd90 c09efd90 00000000 00000024
fda0:
dcbf8d00 00000000 00000005 dcbf8d00 c09efdb0 c09efdb0 00000000 00000040
fdc0:
c09efdec dcbf8d00 dcbfc9c0 c09ed140 00000040 00000000 00000100 00000040
fde0:
c09efe14 c09efdf0 bf1739b4 bf132840 dcbfc9c0 ddb82140 c09ed140 1d195000
fe00:
00000001 00000100 c09efe64 c09efe18 c067136c bf173958 ddb7fac8 c09f0d00
fe20:
001df678 0000012c c09efe28 c09efe28 c09efe30 c09efe30 c0a7fb28 ffffe000
fe40:
c09f008c 00000003 00000008 c0a598c0 00000100 c09f0080 c09efeb4 c09efe68
fe60:
c02096e0 c0671278 c0494584 00000080 dd5c3300 c09f0d00 00000004 001df677
fe80:
0000000a 00200100 dd5c3300 00000000 00000000 c09eaa70 00000060 dd410800
fea0:
c09ee000 00000000 c09efecc c09efeb8 c0227944 c02094c4 00000000 00000000
fec0:
c09efef4 c09efed0 c0268b64 c02278ac de802000 c09f1b1c c09eff20 c0a16cc0
fee0:
de803000 c09ee000 c09eff1c c09efef8 c020947c c0268ae0 c02103dc 600f0013
ff00:
ffffffff c09eff54 ffffe000 c09ee000 c09eff7c c09eff20 c021448c c0209424
ff20:
00000001 00000000 00000000 c021ddc0 00000000 00000000 c09f1024 00000001
ff40:
ffffe000 c09f1078 00000000 c09eff7c c09eff80 c09eff70 c02103ec c02103dc
ff60:
600f0013 ffffffff 00000051 00000000 c09eff8c c09eff80 c0763cc4 c02103bc
ff80:
c09effa4 c09eff90 c025f0e4 c0763c98 c0a59040 c09f1000 c09effb4 c09effa8
ffa0:
c075efe0 c025efd4 c09efff4 c09effb8 c097dcac c075ef7c ffffffff ffffffff
ffc0:
00000000 c097d6c4 00000000 c09c1a28 c0a59294 c09f101c c09c1a24 c09f61c0
ffe0:
4220406a 512f04d0 00000000 c09efff8 4220807c c097d95c 00000000 00000000
[<
c065dcc4>] (kfree_skb_list) from [<
c065da5c>] (skb_release_data+0x6c/0x108)
[<
c065da5c>] (skb_release_data) from [<
c065db28>] (skb_release_all+0x30/0x34)
[<
c065db28>] (skb_release_all) from [<
c065db48>] (__kfree_skb+0x1c/0x9c)
[<
c065db48>] (__kfree_skb) from [<
c065ddd0>] (consume_skb+0xcc/0xd8)
[<
c065ddd0>] (consume_skb) from [<
bf09bd00>] (ieee80211_rx_napi+0x150/0x82c [mac80211])
[<
bf09bd00>] (ieee80211_rx_napi [mac80211]) from [<
bf132458>] (ath10k_htt_t2h_msg_handler+0x15e8/0x19c4 [ath10k_core])
[<
bf132458>] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [<
bf132544>] (ath10k_htt_t2h_msg_handler+0x16d4/0x19c4 [ath10k_core])
[<
bf132544>] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [<
bf133630>] (ath10k_htt_txrx_compl_task+0xdfc/0x12cc [ath10k_core])
[<
bf133630>] (ath10k_htt_txrx_compl_task [ath10k_core]) from [<
bf1739b4>] (ath10k_pci_napi_poll+0x68/0xf4 [ath10k_pci])
[<
bf1739b4>] (ath10k_pci_napi_poll [ath10k_pci]) from [<
c067136c>] (net_rx_action+0x100/0x33c)
[<
c067136c>] (net_rx_action) from [<
c02096e0>] (__do_softirq+0x228/0x31c)
[<
c02096e0>] (__do_softirq) from [<
c0227944>] (irq_exit+0xa4/0x114)
The trace points to a corrupt skb inside kfree_skb(), seemingly because
one of the shared skb queues is getting corrupted. Most of the skb queues
ath10k uses are local to a single call stack, but three are shared among
multiple codepaths:
- rx_msdus_q,
- rx_in_ord_compl_q, and
- tx_fetch_ind_q
Of the three, the first two are manipulated using the unlocked skb_queue
functions without any additional lock protecting them. Use the locked
variants of skb_queue_* functions to protect these manipulations.
Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Machata [Thu, 28 Jun 2018 16:56:33 +0000 (18:56 +0200)]
selftests: forwarding: Tweak tc filters for mirror-to-gretap tests
[ Upstream commit
ec9fdc99f5a6a2cfe4061e807fcb0cc1129f0a2d ]
When running mirror_gre_bridge_1d_vlan tests on veth, several issues
cause spurious failures:
- vlan_ethtype should be ip, not ipv6 even in mirror-to-ip6gretap case,
because the overlay packet is still IPv4.
- Similarly ip_proto matches the innermost IP protocol, so can't be used
to filter out GRE packet. Drop the corresponding condition.
- Because the above fixes the filters to match in slow path as well,
they need to be made skip_hw so as not to double-count packets.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Mc Guire [Fri, 29 Jun 2018 17:07:42 +0000 (19:07 +0200)]
ALSA: snd-aoa: add of_node_put() in error path
[ Upstream commit
222bce5eb88d1af656419db04bcd84b2419fb900 ]
Both calls to of_find_node_by_name() and of_get_next_child() return a
node pointer with refcount incremented thus it must be explicidly
decremented here after the last usage. As we are assured to have a
refcounted np either from the initial
of_find_node_by_name(NULL, name); or from the of_get_next_child(gpio, np)
in the while loop if we reached the error code path below, an
x of_node_put(np) is needed.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: commit
f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Tue, 26 Jun 2018 13:21:32 +0000 (15:21 +0200)]
posix-timers: Sanitize overrun handling
[ Upstream commit
78c9c4dfbf8c04883941445a195276bb4bb92c76 ]
The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.
The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.
Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Tue, 26 Jun 2018 13:21:31 +0000 (15:21 +0200)]
posix-timers: Make forward callback return s64
[ Upstream commit
6fec64e1c92d5c715c6d0f50786daa7708266bde ]
The posix timer ti_overrun handling is broken because the forwarding
functions can return a huge number of overruns which does not fit in an
int. As a consequence timer_getoverrun(2) and siginfo::si_overrun can turn
into random number generators.
As a first step to address that let the timer_forward() callbacks return
the full 64 bit value.
Cast it to (int) temporarily until k_itimer::ti_overrun is converted to
64bit and the conversion to user space visible values is sanitized.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132704.922098090@linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akinobu Mita [Mon, 25 Jun 2018 15:22:41 +0000 (00:22 +0900)]
iio: accel: adxl345: convert address field usage in iio_chan_spec
[ Upstream commit
9048f1f18a70a01eaa3c8e7166fdb2538929d780 ]
Currently the address field in iio_chan_spec is filled with an accel
data register address for the corresponding axis.
In preparation for adding calibration offset support, this sets the
address field to the index of accel data registers instead of the actual
register address.
This change makes it easier to access both accel registers and
calibration offset registers with fewer lines of code as these are
located in X-axis, Y-axis, Z-axis order.
Cc: Eva Rachel Retuya <eraretuya@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Rosin [Thu, 29 Mar 2018 13:10:54 +0000 (15:10 +0200)]
mtd: rawnand: atmel: add module param to avoid using dma
[ Upstream commit
efc6362c6f8c1e74b340e2611f1b35e7d557ce7b ]
On a sama5d31 with a Full-HD dual LVDS panel (132MHz pixel clock) NAND
flash accesses have a tendency to cause display disturbances. Add a
module param to disable DMA from the NAND controller, since that fixes
the display problem for me.
Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Gorbik [Sat, 16 Jun 2018 22:30:43 +0000 (00:30 +0200)]
s390/extmem: fix gcc 8 stringop-overflow warning
[ Upstream commit
6b2ddf33baec23dace85bd647e3fc4ac070963e8 ]
arch/s390/mm/extmem.c: In function '__segment_load':
arch/s390/mm/extmem.c:436:2: warning: 'strncat' specified bound 7 equals
source length [-Wstringop-overflow=]
strncat(seg->res_name, " (DCSS)", 7);
What gcc complains about here is the misuse of strncat function, which
in this case does not limit a number of bytes taken from "src", so it is
in the end the same as strcat(seg->res_name, " (DCSS)");
Keeping in mind that a res_name is 15 bytes, strncat in this case
would overflow the buffer and write 0 into alignment byte between the
fields in the struct. To avoid that increasing res_name size to 16,
and reusing strlcat.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Gorbik [Mon, 25 Jun 2018 12:30:42 +0000 (14:30 +0200)]
s390/scm_blk: correct numa_node in scm_blk_dev_setup
[ Upstream commit
d642d6262f4fcfa5d200ec6e218c17f0c15b3390 ]
The numa_node field of the tag_set struct has to be explicitly
initialized, otherwise it stays as 0, which is a valid numa node id and
cause memory allocation failure if node 0 is offline.
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Gorbik [Sun, 24 Jun 2018 07:21:59 +0000 (09:21 +0200)]
s390/dasd: correct numa_node in dasd_alloc_queue
[ Upstream commit
b17e3abb0af404cb62ad4ef1a5962f58b06e2b78 ]
The numa_node field of the tag_set struct has to be explicitly
initialized, otherwise it stays as 0, which is a valid numa node id and
cause memory allocation failure if node 0 is offline.
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Mon, 2 Jul 2018 07:34:29 +0000 (09:34 +0200)]
alarmtimer: Prevent overflow for relative nanosleep
[ Upstream commit
5f936e19cc0ef97dbe3a56e9498922ad5ba1edef ]
Air Icy reported:
UBSAN: Undefined behaviour in kernel/time/alarmtimer.c:811:7
signed integer overflow:
1529859276030040771 +
9223372036854775807 cannot be represented in type 'long long int'
Call Trace:
alarm_timer_nsleep+0x44c/0x510 kernel/time/alarmtimer.c:811
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1235 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1213 [inline]
__x64_sys_clock_nanosleep+0x326/0x4e0 kernel/time/posix-timers.c:1213
do_syscall_64+0xb8/0x3a0 arch/x86/entry/common.c:290
alarm_timer_nsleep() uses ktime_add() to add the current time and the
relative expiry value. ktime_add() has no sanity checks so the addition
can overflow when the relative timeout is large enough.
Use ktime_add_safe() which has the necessary sanity checks in place and
limits the result to the valid range.
Fixes:
9a7adcf5c6de ("timers: Posix interface for alarm-timers")
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1807020926360.1595@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens [Mon, 2 Jul 2018 08:54:02 +0000 (10:54 +0200)]
s390/sysinfo: add missing #ifdef CONFIG_PROC_FS
[ Upstream commit
9f35b818a2f90fb6cb291aa0c9f835d4f0974a9a ]
Get rid of this compile warning for !PROC_FS:
CC arch/s390/kernel/sysinfo.o
arch/s390/kernel/sysinfo.c:275:12: warning: 'sysinfo_show' defined but not used [-Wunused-function]
static int sysinfo_show(struct seq_file *m, void *v)
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ravi Chandra Sadineni [Wed, 27 Jun 2018 17:55:02 +0000 (10:55 -0700)]
ACPI / button: increment wakeup count only when notified
[ Upstream commit
7c058c7c74b3dbeb7d157c273959f87faf710350 ]
Because acpi_lid_initialize_state() is called on every system
resume and it triggers acpi_lid_notify_state() which invokes
acpi_pm_wakeup_event() for the lid device, the lid's wakeup count is
incremented even if the lid was not the source of the event that woke up
the system. That behavior confuses user space deamons using
wakeup_count to identify the potential system wakeup source. To avoid
the confusion, only trigger acpi_pm_wakeup_event() in the
acpi_button_notify() path and don't do that in the
acpi_lid_initialize_state() path.
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
João Paulo Rechi Vita [Fri, 29 Jun 2018 22:12:46 +0000 (15:12 -0700)]
platform/x86: asus-wireless: Fix uninitialized symbol usage
[ Upstream commit
eca4c4e47eb0658ad251f0bff465e23c055377da ]
'ret' will not be initialized if acpi_evaluate_integer() returns through
an error path, so it should not be used in this case. This fixes the
following Smatch static analyser error:
drivers/platform/x86/asus-wireless.c:76 asus_wireless_method() error:
uninitialized symbol 'ret'.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Kardashevskiy [Fri, 1 Jun 2018 08:06:16 +0000 (18:06 +1000)]
powerpc/powernv/ioda2: Reduce upper limit for DMA window size
[ Upstream commit
d3d4ffaae439981e1e441ebb125aa3588627c5d8 ]
We use PHB in mode1 which uses bit 59 to select a correct DMA window.
However there is mode2 which uses bits 59:55 and allows up to 32 DMA
windows per a PE.
Even though documentation does not clearly specify that, it seems that
the actual hardware does not support bits 59:55 even in mode1, in other
words we can create a window as big as 1<<58 but DMA simply won't work.
This reduces the upper limit from 59 to 55 bits to let the userspace know
about the hardware limits.
Fixes:
7aafac11e3 "powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alagu Sankar [Fri, 29 Jun 2018 13:28:00 +0000 (16:28 +0300)]
ath10k: sdio: set skb len for all rx packets
[ Upstream commit
8530b4e7b22bc3bd8240579f3844c73947cd5f71 ]
Without this, packets larger than 1500 will silently be dropped.
Easily reproduced by sending a ping packet with a size larger
than 1500.
Co-Developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alagu Sankar [Fri, 29 Jun 2018 13:27:56 +0000 (16:27 +0300)]
ath10k: sdio: use same endpoint id for all packets in a bundle
[ Upstream commit
679e1f07c86221b7183dd69df7068fd42d0041f6 ]
All packets in a bundle should use the same endpoint id as the
first lookahead.
This matches how things are done is ath6kl, however,
this patch can theoretically handle several bundles
in ath10k_sdio_mbox_rx_process_packets().
Without this patch we get lots of errors about invalid endpoint id:
ath10k_sdio mmc2:0001:1: invalid endpoint in look-ahead: 224
ath10k_sdio mmc2:0001:1: failed to get pending recv messages: -12
ath10k_sdio mmc2:0001:1: failed to process pending SDIO interrupts: -12
Co-Developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Sun, 1 Jul 2018 17:32:04 +0000 (19:32 +0200)]
usb: wusbcore: security: cast sizeof to int for comparison
[ Upstream commit
d3ac5598c5010a8999978ebbcca3b1c6188ca36b ]
Comparing an int to a size, which is unsigned, causes the int to become
unsigned, giving the wrong result. usb_get_descriptor can return a
negative error code.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
int x;
expression e,e1;
identifier f;
@@
*x = f(...);
... when != x = e1
when != if (x < 0 || ...) { ... return ...; }
*x < sizeof(e)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Thu, 28 Jun 2018 18:48:57 +0000 (13:48 -0500)]
scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion
[ Upstream commit
36d4cb460bcbe2a1323732a6e4bb9dd783284368 ]
The approach for adding a device to the devices_idr data structure and for
removing it is as follows:
* &dev->dev_group.cg_item is initialized before a device is added to
devices_idr.
* If the reference count of a device drops to zero then
target_free_device() removes the device from devices_idr.
* All devices_idr manipulations are protected by device_mutex.
This means that increasing the reference count of a device is sufficient to
prevent removal from devices_idr and also that it is safe access
dev_group.cg_item for any device that is referenced by devices_idr. Use
this to modify target_find_device() and target_for_each_device() such that
these functions no longer introduce a dependency between device_mutex and
the configfs root inode mutex.
Note: it is safe to pass a NULL pointer to config_item_put() and also to
config_item_get_unless_zero().
This patch prevents that lockdep reports the following complaint:
======================================================
WARNING: possible circular locking dependency detected
4.12.0-rc1-dbg+ #1 Not tainted
------------------------------------------------------
rmdir/12053 is trying to acquire lock:
(device_mutex#2){+.+.+.}, at: [<
ffffffffa010afce>]
target_free_device+0xae/0xf0 [target_core_mod]
but task is already holding lock:
(&sb->s_type->i_mutex_key#14){++++++}, at: [<
ffffffff811c5c30>]
vfs_rmdir+0x50/0x140
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&sb->s_type->i_mutex_key#14){++++++}:
lock_acquire+0x59/0x80
down_write+0x36/0x70
configfs_depend_item+0x3a/0xb0 [configfs]
target_depend_item+0x13/0x20 [target_core_mod]
target_xcopy_locate_se_dev_e4_iter+0x87/0x100 [target_core_mod]
target_devices_idr_iter+0x16/0x20 [target_core_mod]
idr_for_each+0x39/0xc0
target_for_each_device+0x36/0x50 [target_core_mod]
target_xcopy_locate_se_dev_e4+0x28/0x80 [target_core_mod]
target_xcopy_do_work+0x2e9/0xdd0 [target_core_mod]
process_one_work+0x1ca/0x3f0
worker_thread+0x49/0x3b0
kthread+0x109/0x140
ret_from_fork+0x31/0x40
-> #0 (device_mutex#2){+.+.+.}:
__lock_acquire+0x101f/0x11d0
lock_acquire+0x59/0x80
__mutex_lock+0x7e/0x950
mutex_lock_nested+0x16/0x20
target_free_device+0xae/0xf0 [target_core_mod]
target_core_dev_release+0x10/0x20 [target_core_mod]
config_item_put+0x6e/0xb0 [configfs]
configfs_rmdir+0x1a6/0x300 [configfs]
vfs_rmdir+0xb7/0x140
do_rmdir+0x1f4/0x200
SyS_rmdir+0x11/0x20
entry_SYSCALL_64_fastpath+0x23/0xc2
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sb->s_type->i_mutex_key#14);
lock(device_mutex#2);
lock(&sb->s_type->i_mutex_key#14);
lock(device_mutex#2);
*** DEADLOCK ***
3 locks held by rmdir/12053:
#0: (sb_writers#10){.+.+.+}, at: [<
ffffffff811e223f>]
mnt_want_write+0x1f/0x50
#1: (&sb->s_type->i_mutex_key#14/1){+.+.+.}, at: [<
ffffffff811cb97e>]
do_rmdir+0x15e/0x200
#2: (&sb->s_type->i_mutex_key#14){++++++}, at: [<
ffffffff811c5c30>]
vfs_rmdir+0x50/0x140
stack backtrace:
CPU: 3 PID: 12053 Comm: rmdir Not tainted 4.12.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0x86/0xcf
print_circular_bug+0x1c7/0x220
__lock_acquire+0x101f/0x11d0
lock_acquire+0x59/0x80
__mutex_lock+0x7e/0x950
mutex_lock_nested+0x16/0x20
target_free_device+0xae/0xf0 [target_core_mod]
target_core_dev_release+0x10/0x20 [target_core_mod]
config_item_put+0x6e/0xb0 [configfs]
configfs_rmdir+0x1a6/0x300 [configfs]
vfs_rmdir+0xb7/0x140
do_rmdir+0x1f4/0x200
SyS_rmdir+0x11/0x20
entry_SYSCALL_64_fastpath+0x23/0xc2
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
[Rebased to handle conflict withe target_find_device removal]
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Breno Leitao [Tue, 26 Jun 2018 20:35:16 +0000 (17:35 -0300)]
scsi: ibmvscsi: Improve strings handling
[ Upstream commit
1262dc09dc9ae7bf4ad00b6a2c5ed6a6936bcd10 ]
Currently an open firmware property is copied into partition_name variable
without keeping a room for \0.
Later one, this variable (partition_name), which is 97 bytes long, is
strncpyed into ibmvcsci_host_data->madapter_info->partition_name, which is
96 bytes long, possibly truncating it 'again' and removing the \0.
This patch simply decreases the partition name to 96 and just copy using
strlcpy() which guarantees that the string is \0 terminated. I think there
is no issue if this there is a truncation in this very first copy, i.e,
when the open firmware property is read and copied into the driver for the
very first time;
This issue also causes the following warning on GCC 8:
drivers/scsi/ibmvscsi/ibmvscsi.c:281:2: warning: strncpy output may be truncated copying 96 bytes from a string of length 96 [-Wstringop-truncation]
...
inlined from ibmvscsi_probe at drivers/scsi/ibmvscsi/ibmvscsi.c:2221:7:
drivers/scsi/ibmvscsi/ibmvscsi.c:265:3: warning: strncpy specified bound 97 equals destination size [-Wstringop-truncation]
CC: Bart Van Assche <bart.vanassche@wdc.com>
CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Fri, 22 Jun 2018 21:54:49 +0000 (14:54 -0700)]
scsi: klist: Make it safe to use klists in atomic context
[ Upstream commit
624fa7790f80575a4ec28fbdb2034097dc18d051 ]
In the scsi_transport_srp implementation it cannot be avoided to
iterate over a klist from atomic context when using the legacy block
layer instead of blk-mq. Hence this patch that makes it safe to use
klists in atomic context. This patch avoids that lockdep reports the
following:
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&(&k->k_lock)->rlock);
local_irq_disable();
lock(&(&q->__queue_lock)->rlock);
lock(&(&k->k_lock)->rlock);
<Interrupt>
lock(&(&q->__queue_lock)->rlock);
stack backtrace:
Workqueue: kblockd blk_timeout_work
Call Trace:
dump_stack+0xa4/0xf5
check_usage+0x6e6/0x700
__lock_acquire+0x185d/0x1b50
lock_acquire+0xd2/0x260
_raw_spin_lock+0x32/0x50
klist_next+0x47/0x190
device_for_each_child+0x8e/0x100
srp_timed_out+0xaf/0x1d0 [scsi_transport_srp]
scsi_times_out+0xd4/0x410 [scsi_mod]
blk_rq_timed_out+0x36/0x70
blk_timeout_work+0x1b5/0x220
process_one_work+0x4fe/0xad0
worker_thread+0x63/0x5a0
kthread+0x1c1/0x1e0
ret_from_fork+0x24/0x30
See also commit
c9ddf73476ff ("scsi: scsi_transport_srp: Fix shost to
rport translation").
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jean-Christophe Dubois [Sat, 30 Jun 2018 22:10:50 +0000 (00:10 +0200)]
thermal: i.MX: Allow thermal probe to fail gracefully in case of bad calibration.
[ Upstream commit
be926ceeb4efc3bf44cb9b56f5c71aac9b1f8bbe ]
Without this fix, the thermal probe on i.MX6 might trigger a division
by zero exception later in the probe if the calibration does fail.
Note: This linux behavior (Division by zero in kernel) has been triggered
on a Qemu i.MX6 emulation where parameters in nvmem were not set. With this
fix the division by zero is not triggeed anymore as the thermal probe does
fail early.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Fri, 22 Jun 2018 21:53:01 +0000 (14:53 -0700)]
scsi: target/iscsi: Make iscsit_ta_authentication() respect the output buffer size
[ Upstream commit
35bea5c84fd13c643cce63f0b5cd4b148f8c901d ]
Fixes:
e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Viresh Kumar [Fri, 25 May 2018 10:31:48 +0000 (16:01 +0530)]
ARM: dts: ls1021a: Add missing cooling device properties for CPUs
[ Upstream commit
47768f372eae030db6fab5225f9504a820d2c07f ]
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Beulich [Mon, 2 Jul 2018 10:47:57 +0000 (04:47 -0600)]
x86/entry/64: Add two more instruction suffixes
[ Upstream commit
6709812f094d96543b443645c68daaa32d3d3e77 ]
Sadly, other than claimed in:
a368d7fd2a ("x86/entry/64: Add instruction suffix")
... there are two more instances which want to be adjusted.
As said there, omitting suffixes from instructions in AT&T mode is bad
practice when operand size cannot be determined by the assembler from
register operands, and is likely going to be warned about by upstream
gas in the future (mine does already).
Add the other missing suffixes here as well.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/5B3A02DD02000078001CFB78@prv1-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Gerlach [Thu, 21 Jun 2018 09:13:08 +0000 (14:43 +0530)]
ARM: hwmod: RTC: Don't assume lock/unlock will be called with irq enabled
[ Upstream commit
6d609b35c815ba20132b7b64bcca04516bb17c56 ]
When the RTC lock and unlock functions were introduced it was likely
assumed that they would always be called from irq enabled context, hence
the use of local_irq_disable/enable. This is no longer true as the
RTC+DDR path makes a late call during the suspend path after irqs
have been disabled to enable the RTC hwmod which calls both unlock and
lock, leading to IRQs being reenabled through the local_irq_enable call
in omap_hwmod_rtc_lock call.
To avoid this change the local_irq_disable/enable to
local_irq_save/restore to ensure that from whatever context this is
called the proper IRQ configuration is maintained.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Fri, 29 Jun 2018 19:31:10 +0000 (22:31 +0300)]
x86/tsc: Add missing header to tsc_msr.c
[ Upstream commit
dbd0fbc76c77daac08ddd245afdcbade0d506e19 ]
Add a missing header otherwise compiler warns about missed prototype:
CC arch/x86/kernel/tsc_msr.o
arch/x86/kernel/tsc_msr.c:73:15: warning: no previous prototype for ‘cpu_khz_from_msr’ [-Wmissing-prototypes]
unsigned long cpu_khz_from_msr(void)
^~~~~~~~~~~~~~~~
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Link: https://lkml.kernel.org/r/20180629193113.84425-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Mon, 2 Jul 2018 17:06:51 +0000 (10:06 -0700)]
include/rdma/opa_addr.h: Fix an endianness issue
[ Upstream commit
4eefd62c17a9a5e7576207e84f3d2b4f73aba750 ]
IB_MULTICAST_LID_BASE is defined as follows:
#define IB_MULTICAST_LID_BASE cpu_to_be16(0xC000)
Hence use be16_to_cpu() to convert it to CPU endianness. Compile-tested
only.
Fixes:
af808ece5ce9 ("IB/SA: Check dlid before SA agent queries for ClassPortInfo")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maor Gottlieb [Sun, 1 Jul 2018 12:50:17 +0000 (15:50 +0300)]
IB/mlx5: Fix GRE flow specification
[ Upstream commit
a93b632c4531ff50c43d658447a45cbc11f488fd ]
Currently the driver sets the mask of the gre_protocol to 0xffff
without consideration in the user request.
Fix it by copy the mask from the verbs spec.
Fixes:
da2f22ae7707 ("IB/mlx5: Add support for GRE flow specification")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Seiderer [Thu, 15 Mar 2018 19:13:22 +0000 (15:13 -0400)]
media: staging/imx: fill vb2_v4l2_buffer field entry
[ Upstream commit
a38d4b71cb7a12b65317f4e3d59883a918957719 ]
- fixes gstreamer v4l2src warning:
0:00:00.
716640334 349 0x164f720 WARN v4l2bufferpool gstv4l2bufferpool.c:1195:gst_v4l2_buffer_pool_dqbuf:<v4l2src0:pool:src> Driver should never set v4l2_buffer.field to ANY
- fixes v4l2-compliance test failure:
Streaming ioctls:
test read/write: OK (Not Supported)
Video Capture:
Buffer: 0 Sequence: 0 Field: Any Timestamp: 58.383658s
fail: v4l2-test-buffers.cpp(297): g_field() == V4L2_FIELD_ANY
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Toshiaki Makita [Tue, 3 Jul 2018 07:31:32 +0000 (16:31 +0900)]
vhost_net: Avoid tx vring kicks during busyloop
[ Upstream commit
027b17603b030f1334ade079b7a3e986569c956b ]
Under heavy load vhost busypoll may run without suppressing
notification. For example tx zerocopy callback can push tx work while
handle_tx() is running, then busyloop exits due to vhost_has_work()
condition and enables notification but immediately reenters handle_tx()
because the pushed work was tx. In this case handle_tx() tries to
disable notification again, but when using event_idx it by design
cannot. Then busyloop will run without suppressing notification.
Another example is the case where handle_tx() tries to enable
notification but avail idx is advanced so disables it again. This case
also leads to the same situation with event_idx.
The problem is that once we enter this situation busyloop does not work
under heavy load for considerable amount of time, because notification
is likely to happen during busyloop and handle_tx() immediately enables
notification after notification happens. Specifically busyloop detects
notification by vhost_has_work() and then handle_tx() calls
vhost_enable_notify(). Because the detected work was the tx work, it
enters handle_tx(), and enters busyloop without suppression again.
This is likely to be repeated, so with event_idx we are almost not able
to suppress notification in this case.
To fix this, poll the work instead of enabling notification when
busypoll is interrupted by something. IMHO vhost_has_work() is kind of
interruption rather than a signal to completely cancel the busypoll, so
let's run busypoll after the necessary work is done.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Khoroshilov [Fri, 29 Jun 2018 21:49:22 +0000 (17:49 -0400)]
media: fsl-viu: fix error handling in viu_of_probe()
[ Upstream commit
662a99e145661c2b35155cf375044deae9b79896 ]
viu_of_probe() ignores fails in i2c_get_adapter(),
tries to unlock uninitialized mutex on error path.
The patch streamlining the error handling in viu_of_probe().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hari Bathini [Thu, 28 Jun 2018 05:19:56 +0000 (10:49 +0530)]
powerpc/kdump: Handle crashkernel memory reservation failure
[ Upstream commit
8950329c4a64c6d3ca0bc34711a1afbd9ce05657 ]
Memory reservation for crashkernel could fail if there are holes around
kdump kernel offset (128M). Fail gracefully in such cases and print an
error message.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: David Gibson <dgibson@redhat.com>
Reviewed-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tarick Bedeir [Mon, 2 Jul 2018 21:02:34 +0000 (14:02 -0700)]
IB/mlx4: Test port number before querying type.
[ Upstream commit
f1228867adaf8890826f2b59e4caddb1c5cc2df7 ]
rdma_ah_find_type() can reach into ib_device->port_immutable with a
potentially out-of-bounds port number, so check that the port number is
valid first.
Fixes:
44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sylwester Nawrocki [Tue, 15 May 2018 09:21:45 +0000 (05:21 -0400)]
media: exynos4-is: Prevent NULL pointer dereference in __isp_video_try_fmt()
[ Upstream commit
7c1b9a5aeed91bef98988ac0fcf38c8c1f4f9a3a ]
This patch fixes potential NULL pointer dereference as indicated
by the following static checker warning:
drivers/media/platform/exynos4-is/fimc-isp-video.c:408 isp_video_try_fmt_mplane()
error: NULL dereference inside function '__isp_video_try_fmt(isp, &f->fmt.pix_mp, (0))()'.
Fixes:
34947b8aebe3: ("[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 4 Jul 2018 09:32:12 +0000 (12:32 +0300)]
IB/core: type promotion bug in rdma_rw_init_one_mr()
[ Upstream commit
c2d7c8ff89b22ddefb1ac2986c0d48444a667689 ]
"nents" is an unsigned int, so if ib_map_mr_sg() returns a negative
error code then it's type promoted to a high unsigned int which is
treated as success.
Fixes:
a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 4 Jul 2018 09:58:02 +0000 (12:58 +0300)]
RDMA/bnxt_re: Fix a bunch of off by one bugs in qplib_fp.c
[ Upstream commit
c1dfc0114c901b4f46c85ceff0491debf2b2a2ec ]
The srq->swq[] is allocated in bnxt_qplib_create_srq(). It has
srq->hwq.max_elements elements so these tests should be > instead of >=
or we might go beyond the end of the array.
Fixes:
1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Sun, 1 Jul 2018 16:36:24 +0000 (19:36 +0300)]
RDMA/i40w: Hold read semaphore while looking after VMA
[ Upstream commit
5d9a2b0e28759e319a623da33940dbb3ce952b7d ]
VMA lookup is supposed to be performed while mmap_sem is held.
Fixes:
f26c7c83395b ("i40iw: Add 2MB page support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 4 Jul 2018 09:57:11 +0000 (12:57 +0300)]
RDMA/bnxt_re: Fix a couple off by one bugs
[ Upstream commit
474e5a86067e5f12c97d1db8b170c7f45b53097a ]
The sgid_tbl->tbl[] array is allocated in bnxt_qplib_alloc_sgid_tbl().
It has sgid_tbl->max elements. So the > should be >= to prevent
accessing one element beyond the end of the array.
Fixes:
1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ganesh Goudar [Wed, 4 Jul 2018 12:19:33 +0000 (17:49 +0530)]
cxgb4: Fix the condition to check if the card is T5
[ Upstream commit
dfecc759e64b0ea581468fe2359836f1998deac9 ]
Use 'chip_ver' rather than 'chip' to check if the card
is T5.
Fixes:
e8d452923ae6 ("cxgb4: clean up init_one")
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guoqing Jiang [Mon, 2 Jul 2018 08:26:24 +0000 (16:26 +0800)]
md-cluster: clear another node's suspend_area after the copy is finished
[ Upstream commit
010228e4a932ca1e8365e3b58c8e1e44c16ff793 ]
When one node leaves cluster or stops the resyncing
(resync or recovery) array, then other nodes need to
call recover_bitmaps to continue the unfinished task.
But we need to clear suspend_area later after other
nodes copy the resync information to their bitmap
(by call bitmap_copy_from_slot). Otherwise, all nodes
could write to the suspend_area even the suspend_area
is not handled by any node, because area_resyncing
returns 0 at the beginning of raid1_write_request.
Which means one node could write suspend_area while
another node is resyncing the same area, then data
could be inconsistent.
So let's clear suspend_area later to avoid above issue
with the protection of bm lock. Also it is straightforward
to clear suspend_area after nodes have copied the resync
info to bitmap.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wesley Chalmers [Tue, 29 May 2018 21:45:05 +0000 (17:45 -0400)]
drm/amd/display: fix use of uninitialized memory
[ Upstream commit
f3e077d95ca0a016fdf3d6b1e97a9910dfdaff17 ]
DML does not calculate chroma values for RQ when surface is not YUV, but DC
will unconditionally use the uninitialized values for HW programming.
This does not cause visual corruption since HW will ignore garbage chroma
values when surface is not YUV, but causes presubmission tests to fail
golden value comparison.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Wed, 4 Jul 2018 13:22:11 +0000 (08:22 -0500)]
drm/amd/display/dc/dce: Fix multiple potential integer overflows
[ Upstream commit
6f3472a993e7cb63cde5d818dcabc8e42fc03744 ]
Add suffix ULL to constant 5 and cast variables target_pix_clk_khz and
feedback_divider to uint64_t in order to avoid multiple potential integer
overflows and give the compiler complete information about the proper
arithmetic to use.
Notice that such constant and variables are used in contexts that
expect expressions of type uint64_t (64 bits, unsigned). The current
casts to uint64_t effectively apply to each expression as a whole,
but they do not prevent them from being evaluated using 32-bit
arithmetic instead of 64-bit arithmetic.
Also, once the expressions are properly evaluated using 64-bit
arithmentic, there is no need for the parentheses that enclose
them.
Addresses-Coverity-ID:
1460245 ("Unintentional integer overflow")
Addresses-Coverity-ID:
1460286 ("Unintentional integer overflow")
Addresses-Coverity-ID:
1460401 ("Unintentional integer overflow")
Fixes:
4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Tissoires [Mon, 25 Jun 2018 07:51:48 +0000 (09:51 +0200)]
power: remove possible deadlock when unregistering power_supply
[ Upstream commit
3ffa6583e24e1ad1abab836d24bfc9d2308074e5 ]
If a device gets removed right after having registered a power_supply node,
we might enter in a deadlock between the remove call (that has a lock on
the parent device) and the deferred register work.
Allow the deferred register work to exit without taking the lock when
we are in the remove state.
Stack trace on a Ubuntu 16.04:
[16072.109121] INFO: task kworker/u16:2:1180 blocked for more than 120 seconds.
[16072.109127] Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu
[16072.109129] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[16072.109132] kworker/u16:2 D 0 1180 2 0x80000000
[16072.109142] Workqueue: events_power_efficient power_supply_deferred_register_work
[16072.109144] Call Trace:
[16072.109152] __schedule+0x3d6/0x8b0
[16072.109155] schedule+0x36/0x80
[16072.109158] schedule_preempt_disabled+0xe/0x10
[16072.109161] __mutex_lock.isra.2+0x2ab/0x4e0
[16072.109166] __mutex_lock_slowpath+0x13/0x20
[16072.109168] ? __mutex_lock_slowpath+0x13/0x20
[16072.109171] mutex_lock+0x2f/0x40
[16072.109174] power_supply_deferred_register_work+0x2b/0x50
[16072.109179] process_one_work+0x15b/0x410
[16072.109182] worker_thread+0x4b/0x460
[16072.109186] kthread+0x10c/0x140
[16072.109189] ? process_one_work+0x410/0x410
[16072.109191] ? kthread_create_on_node+0x70/0x70
[16072.109194] ret_from_fork+0x35/0x40
[16072.109199] INFO: task test:2257 blocked for more than 120 seconds.
[16072.109202] Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu
[16072.109204] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[16072.109206] test D 0 2257 2256 0x00000004
[16072.109208] Call Trace:
[16072.109211] __schedule+0x3d6/0x8b0
[16072.109215] schedule+0x36/0x80
[16072.109218] schedule_timeout+0x1f3/0x360
[16072.109221] ? check_preempt_curr+0x5a/0xa0
[16072.109224] ? ttwu_do_wakeup+0x1e/0x150
[16072.109227] wait_for_completion+0xb4/0x140
[16072.109230] ? wait_for_completion+0xb4/0x140
[16072.109233] ? wake_up_q+0x70/0x70
[16072.109236] flush_work+0x129/0x1e0
[16072.109240] ? worker_detach_from_pool+0xb0/0xb0
[16072.109243] __cancel_work_timer+0x10f/0x190
[16072.109247] ? device_del+0x264/0x310
[16072.109250] ? __wake_up+0x44/0x50
[16072.109253] cancel_delayed_work_sync+0x13/0x20
[16072.109257] power_supply_unregister+0x37/0xb0
[16072.109260] devm_power_supply_release+0x11/0x20
[16072.109263] release_nodes+0x110/0x200
[16072.109266] devres_release_group+0x7c/0xb0
[16072.109274] wacom_remove+0xc2/0x110 [wacom]
[16072.109279] hid_device_remove+0x6e/0xd0 [hid]
[16072.109284] device_release_driver_internal+0x158/0x210
[16072.109288] device_release_driver+0x12/0x20
[16072.109291] bus_remove_device+0xec/0x160
[16072.109293] device_del+0x1de/0x310
[16072.109298] hid_destroy_device+0x27/0x60 [hid]
[16072.109303] usbhid_disconnect+0x51/0x70 [usbhid]
[16072.109308] usb_unbind_interface+0x77/0x270
[16072.109311] device_release_driver_internal+0x158/0x210
[16072.109315] device_release_driver+0x12/0x20
[16072.109318] usb_driver_release_interface+0x77/0x80
[16072.109321] proc_ioctl+0x20f/0x250
[16072.109325] usbdev_do_ioctl+0x57f/0x1140
[16072.109327] ? __wake_up+0x44/0x50
[16072.109331] usbdev_ioctl+0xe/0x20
[16072.109336] do_vfs_ioctl+0xa4/0x600
[16072.109339] ? vfs_write+0x15a/0x1b0
[16072.109343] SyS_ioctl+0x79/0x90
[16072.109347] entry_SYSCALL_64_fastpath+0x24/0xab
[16072.109349] RIP: 0033:0x7f20da807f47
[16072.109351] RSP: 002b:
00007ffc422ae398 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[16072.109353] RAX:
ffffffffffffffda RBX:
00000000010b8560 RCX:
00007f20da807f47
[16072.109355] RDX:
00007ffc422ae3a0 RSI:
00000000c0105512 RDI:
0000000000000009
[16072.109356] RBP:
0000000000000000 R08:
00007ffc422ae3e0 R09:
0000000000000010
[16072.109357] R10:
00000000000000a6 R11:
0000000000000246 R12:
0000000000000000
[16072.109359] R13:
00000000010b8560 R14:
00007ffc422ae2e0 R15:
0000000000000000
Reported-and-tested-by: Richard Hughes <rhughes@redhat.com>
Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes:
7f1a57fdd6cb ("power_supply: Fix possible NULL pointer dereference on early uevent")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Gorbik [Sun, 24 Jun 2018 10:17:43 +0000 (12:17 +0200)]
s390/mm: correct allocate_pgste proc_handler callback
[ Upstream commit
5bedf8aa03c28cb8dc98bdd32a41b66d8f7d3eaa ]
Since proc_dointvec does not perform value range control,
proc_dointvec_minmax should be used to limit value range, which is
clearly intended here, as the internal representation of the value:
unsigned int alloc_pgste:1;
In fact it currently works, since we have
mm->context.alloc_pgste = page_table_allocate_pgste || ...
... since commit
23fefe119ceb5 ("s390/kvm: avoid global config of vm.alloc_pgste=1")
Before that it was
mm->context.alloc_pgste = page_table_allocate_pgste;
which was broken. That was introduced with commit
0b46e0a3ec0d7 ("s390/kvm:
remove delayed reallocation of page tables for KVM").
Fixes:
0b46e0a3ec0d7 ("s390/kvm: remove delayed reallocation of page tables for KVM")
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niklas Cassel [Tue, 12 Jun 2018 14:06:10 +0000 (16:06 +0200)]
iommu/msm: Don't call iommu_device_{,un}link from atomic context
[ Upstream commit
379521462e4add27f3514da8e4ab1fd7a54fe1c7 ]
Fixes the following splat during boot:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747
in_atomic(): 1, irqs_disabled(): 128, pid: 77, name: kworker/2:1
4 locks held by kworker/2:1/77:
#0: (ptrval) ((wq_completion)"events"){+.+.}, at: process_one_work+0x1fc/0x8fc
#1: (ptrval) (deferred_probe_work){+.+.}, at: process_one_work+0x1fc/0x8fc
#2: (ptrval) (&dev->mutex){....}, at: __device_attach+0x40/0x178
#3: (ptrval) (msm_iommu_lock){....}, at: msm_iommu_add_device+0x28/0xcc
irq event stamp: 348
hardirqs last enabled at (347): [<
c049dc18>] kfree+0xe0/0x3c0
hardirqs last disabled at (348): [<
c0c35cac>] _raw_spin_lock_irqsave+0x2c/0x68
softirqs last enabled at (0): [<
c0322fd8>] copy_process.part.5+0x280/0x1a68
softirqs last disabled at (0): [<
00000000>] (null)
Preemption disabled at:
[<
00000000>] (null)
CPU: 2 PID: 77 Comm: kworker/2:1 Not tainted
4.17.0-rc5-wt-ath-01075-gaca0516bb4cf #239
Hardware name: Generic DT based system
Workqueue: events deferred_probe_work_func
[<
c0314e00>] (unwind_backtrace) from [<
c030fc70>] (show_stack+0x20/0x24)
[<
c030fc70>] (show_stack) from [<
c0c16ad8>] (dump_stack+0xa0/0xcc)
[<
c0c16ad8>] (dump_stack) from [<
c035a978>] (___might_sleep+0x1f8/0x2d4)
ath10k_sdio mmc2:0001:1: Direct firmware load for ath10k/QCA9377/hw1.0/board-2.bin failed with error -2
[<
c035a978>] (___might_sleep) from [<
c035aac4>] (__might_sleep+0x70/0xa8)
[<
c035aac4>] (__might_sleep) from [<
c0c3066c>] (__mutex_lock+0x50/0xb28)
[<
c0c3066c>] (__mutex_lock) from [<
c0c31170>] (mutex_lock_nested+0x2c/0x34)
ath10k_sdio mmc2:0001:1: board_file api 1 bmi_id N/A crc32
544289f7
[<
c0c31170>] (mutex_lock_nested) from [<
c052d798>] (kernfs_find_and_get_ns+0x30/0x5c)
[<
c052d798>] (kernfs_find_and_get_ns) from [<
c0531cc8>] (sysfs_add_link_to_group+0x28/0x58)
[<
c0531cc8>] (sysfs_add_link_to_group) from [<
c07ef75c>] (iommu_device_link+0x50/0xb4)
[<
c07ef75c>] (iommu_device_link) from [<
c07f2288>] (msm_iommu_add_device+0xa0/0xcc)
[<
c07f2288>] (msm_iommu_add_device) from [<
c07ec6d0>] (add_iommu_group+0x3c/0x64)
[<
c07ec6d0>] (add_iommu_group) from [<
c07f9d40>] (bus_for_each_dev+0x84/0xc4)
[<
c07f9d40>] (bus_for_each_dev) from [<
c07ec7c8>] (bus_set_iommu+0xd0/0x10c)
[<
c07ec7c8>] (bus_set_iommu) from [<
c07f1a68>] (msm_iommu_probe+0x5b8/0x66c)
[<
c07f1a68>] (msm_iommu_probe) from [<
c07feaa8>] (platform_drv_probe+0x60/0xbc)
[<
c07feaa8>] (platform_drv_probe) from [<
c07fc1fc>] (driver_probe_device+0x30c/0x4cc)
[<
c07fc1fc>] (driver_probe_device) from [<
c07fc59c>] (__device_attach_driver+0xac/0x14c)
[<
c07fc59c>] (__device_attach_driver) from [<
c07f9e14>] (bus_for_each_drv+0x68/0xc8)
[<
c07f9e14>] (bus_for_each_drv) from [<
c07fbd3c>] (__device_attach+0xe4/0x178)
[<
c07fbd3c>] (__device_attach) from [<
c07fc698>] (device_initial_probe+0x1c/0x20)
[<
c07fc698>] (device_initial_probe) from [<
c07faee8>] (bus_probe_device+0x98/0xa0)
[<
c07faee8>] (bus_probe_device) from [<
c07fb4f4>] (deferred_probe_work_func+0x74/0x198)
[<
c07fb4f4>] (deferred_probe_work_func) from [<
c0348eb4>] (process_one_work+0x2c4/0x8fc)
[<
c0348eb4>] (process_one_work) from [<
c03497b0>] (worker_thread+0x2c4/0x5cc)
[<
c03497b0>] (worker_thread) from [<
c0350d10>] (kthread+0x180/0x188)
[<
c0350d10>] (kthread) from [<
c03010b4>] (ret_from_fork+0x14/0x20)
Fixes:
42df43b36163 ("iommu/msm: Make use of iommu_device_register interface")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Scott [Tue, 19 Jun 2018 23:44:06 +0000 (16:44 -0700)]
6lowpan: iphc: reset mac_header after decompress to fix panic
[ Upstream commit
03bc05e1a4972f73b4eb8907aa373369e825c252 ]
After decompression of 6lowpan socket data, an IPv6 header is inserted
before the existing socket payload. After this, we reset the
network_header value of the skb to account for the difference in payload
size from prior to decompression + the addition of the IPv6 header.
However, we fail to reset the mac_header value.
Leaving the mac_header value untouched here, can cause a calculation
error in net/packet/af_packet.c packet_rcv() function when an
AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan
interface.
On line 2088, the data pointer is moved backward by the value returned
from skb_mac_header(). If skb->data is adjusted so that it is before
the skb->head pointer (which can happen when an old value of mac_header
is left in place) the kernel generates a panic in net/core/skbuff.c
line 1717.
This panic can be generated by BLE 6lowpan interfaces (such as bt0) and
802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan
sources for compression and decompression.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Acked-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 4 Jul 2018 15:02:18 +0000 (17:02 +0200)]
USB: serial: kobil_sct: fix modem-status error handling
[ Upstream commit
a420b5d939ee58f1d950f0ea782834056520aeaa ]
Make sure to return -EIO in case of a short modem-status read request.
While at it, split the debug message to not include the (zeroed)
transfer-buffer content in case of errors.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jian-Hong Pan [Fri, 25 May 2018 09:54:52 +0000 (17:54 +0800)]
Bluetooth: Add a new Realtek 8723DE ID 0bda:b009
[ Upstream commit
45ae68b8cfc25bdbffc11248001c47ab1b76ff6e ]
Without this patch we cannot turn on the Bluethooth adapter on HP
14-bs007la.
T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=b009 Rev= 2.00
S: Manufacturer=Realtek
S: Product=802.11n WLAN Adapter
S: SerialNumber=
00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhen Lei [Wed, 6 Jun 2018 02:18:46 +0000 (10:18 +0800)]
iommu/amd: make sure TLB to be flushed before IOVA freed
[ Upstream commit
3c120143f584360a13614787e23ae2cdcb5e5ccd ]
Although the mapping has already been removed in the page table, it maybe
still exist in TLB. Suppose the freed IOVAs is reused by others before the
flush operation completed, the new user can not correctly access to its
meomory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Fixes:
b1516a14657a ('iommu/amd: Implement flush queue')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudeep Holla [Mon, 18 Jun 2018 15:54:32 +0000 (16:54 +0100)]
power: vexpress: fix corruption in notifier registration
[ Upstream commit
09bebb1adb21ecd04adf7ccb3b06f73e3a851e93 ]
Vexpress platforms provide two different restart handlers: SYS_REBOOT
that restart the entire system, while DB_RESET only restarts the
daughter board containing the CPU. DB_RESET is overridden by SYS_REBOOT
if it exists.
notifier_chain_register used in register_restart_handler by design
relies on notifiers to be registered once only, however vexpress restart
notifier can get registered twice. When this happen it corrupts list
of notifiers, as result some notifiers can be not called on proper
event, traverse on list can be cycled forever, and second unregister
can access already freed memory.
So far, since this was the only restart handler in the system, no issue
was observed even if the same notifier was registered twice. However
commit
6c5c0d48b686 ("watchdog: sp805: add restart handler") added
support for SP805 restart handlers and since the system under test
contains two vexpress restart and two SP805 watchdog instances, it was
observed that during the boot traversing the restart handler list looped
forever as there's a cycle in that list resulting in boot hang.
This patch fixes the issues by ensuring that the notifier is installed
only once.
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes:
46c99ac66222 ("power/reset: vexpress: Register with kernel restart handler")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>